diff options
| author | Guenter Roeck <linux@roeck-us.net> | 2016-07-04 08:27:38 -0700 |
|---|---|---|
| committer | Guenter Roeck <linux@roeck-us.net> | 2016-09-08 21:34:14 -0700 |
| commit | 637ab157d4a94145a6c9b89113222b6c80fab54c (patch) | |
| tree | 52f89c7dff3443ca50f071ddcadc6e857c910579 /drivers/hwmon | |
| parent | e8172a9381f33b6a4b16871b9149171e0113bfde (diff) | |
hwmon: (lm95241) Use more accurate limits
The lower temperature limit is -128 degrees C. The supported upper limits
are 127.875 or 255.875 degrees C. Also, don't fail if a value outside
the supported range is provided when setting a temperature limit.
Instead, clamp the provided value to the available value range.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/lm95241.c | 8 |
1 files changed, 2 insertions, 6 deletions
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index df94f486b21c..3d96c3fcba9b 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -205,7 +205,7 @@ static ssize_t show_min(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE - 1, data->config & to_sensor_dev_attr(attr)->index ? - "-127000\n" : "0\n"); + "-128000\n" : "0\n"); } static ssize_t set_min(struct device *dev, struct device_attribute *attr, @@ -216,8 +216,6 @@ static ssize_t set_min(struct device *dev, struct device_attribute *attr, if (kstrtol(buf, 10, &val) < 0) return -EINVAL; - if (val < -128000) - return -EINVAL; mutex_lock(&data->update_lock); @@ -242,7 +240,7 @@ static ssize_t show_max(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE - 1, data->config & to_sensor_dev_attr(attr)->index ? - "127000\n" : "255000\n"); + "127875\n" : "255875\n"); } static ssize_t set_max(struct device *dev, struct device_attribute *attr, @@ -253,8 +251,6 @@ static ssize_t set_max(struct device *dev, struct device_attribute *attr, if (kstrtol(buf, 10, &val) < 0) return -EINVAL; - if (val >= 256000) - return -EINVAL; mutex_lock(&data->update_lock); |