diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-29 10:02:35 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-29 10:02:35 -0700 |
| commit | 41e97d7acf5a45f19ade9139ca178bf9e8e236bb (patch) | |
| tree | a5b5e7f541d81df89bb634512f520e62659935c8 /drivers/hwmon | |
| parent | 995cda62100e1f50b0f0c5b793c672f50baa6241 (diff) | |
| parent | 919a83d020a8dfa1411c1dc1cff23a833f0f5268 (diff) | |
Merge tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
Diffstat (limited to 'drivers/hwmon')
63 files changed, 1394 insertions, 1304 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 307477b8a371..ec38c8892158 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -734,6 +734,16 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. +config SENSORS_HS3001 + tristate "Renesas HS3001 humidity and temperature sensors" + depends on I2C + help + If you say yes here you get support for the Renesas HS3001, + to HS3004 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called hs3001. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -1951,20 +1961,6 @@ config SENSORS_SFCTEMP This driver can also be built as a module. If so, the module will be called sfctemp. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_ADC128D818 tristate "Texas Instruments ADC128D818" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3f4b0fda0998..4ac9452b5430 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o +obj-$(CONFIG_SENSORS_HS3001) += hs3001.o obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o @@ -191,7 +192,6 @@ obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o -obj-$(CONFIG_SENSORS_SMM665) += smm665.o obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index ffe81e445010..4829f83ff52e 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -16,7 +16,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/delay.h> #include <linux/slab.h> @@ -253,7 +253,7 @@ static int ad7418_probe(struct i2c_client *client) mutex_init(&data->lock); data->client = client; if (dev->of_node) - data->type = (enum chips)of_device_get_match_data(dev); + data->type = (uintptr_t)of_device_get_match_data(dev); else data->type = i2c_match_id(ad7418_id, client)->driver_data; diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 1932613ec095..809e830f52a6 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_data/ads7828.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -139,8 +139,7 @@ static int ads7828_probe(struct i2c_client *client) } if (client->dev.of_node) - chip = (enum ads7828_chips) - of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = i2c_match_id(ads7828_device_ids, client)->driver_data; diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index c0ce88324ea6..03acadc3a6cb 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -10,7 +10,6 @@ */ #include <linux/module.h> -#include <linux/of_device.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/i2c.h> @@ -1653,7 +1652,7 @@ static int adt7475_probe(struct i2c_client *client) i2c_set_clientdata(client, data); if (client->dev.of_node) - chip = (enum chips)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = id->driver_data; diff --git a/drivers/hwmon/as370-hwmon.c b/drivers/hwmon/as370-hwmon.c index fffbf385a57f..316454bd983d 100644 --- a/drivers/hwmon/as370-hwmon.c +++ b/drivers/hwmon/as370-hwmon.c @@ -11,7 +11,8 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> #define CTRL 0x0 #define PD BIT(0) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index d11f674e3dc3..997df4b40509 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -12,8 +12,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c index f52a539eb33e..51f9c2db403e 100644 --- a/drivers/hwmon/asus-ec-sensors.c +++ b/drivers/hwmon/asus-ec-sensors.c @@ -340,7 +340,7 @@ static const struct ec_board_info board_info_crosshair_x670e_hero = { .sensors = SENSOR_TEMP_CPU | SENSOR_TEMP_CPU_PACKAGE | SENSOR_TEMP_MB | SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER, - .mutex_path = ASUS_HW_ACCESS_MUTEX_RMTW_ASMX, + .mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH, .family = family_amd_600_series, }; diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c index 8d402a627306..b77ebac2e0ce 100644 --- a/drivers/hwmon/bt1-pvt.c +++ b/drivers/hwmon/bt1-pvt.c @@ -891,15 +891,8 @@ static struct pvt_hwmon *pvt_create_data(struct platform_device *pdev) static int pvt_request_regs(struct pvt_hwmon *pvt) { struct platform_device *pdev = to_platform_device(pvt->dev); - struct resource *res; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(pvt->dev, "Couldn't find PVT memresource\n"); - return -EINVAL; - } - - pvt->regs = devm_ioremap_resource(pvt->dev, res); + pvt->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pvt->regs)) return PTR_ERR(pvt->regs); diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c index 1b6ff4712138..fad69ef56c75 100644 --- a/drivers/hwmon/g762.c +++ b/drivers/hwmon/g762.c @@ -39,7 +39,6 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/platform_data/g762.h> #define DRVNAME "g762" diff --git a/drivers/hwmon/gxp-fan-ctrl.c b/drivers/hwmon/gxp-fan-ctrl.c index 2e05bc2f627a..00e057050437 100644 --- a/drivers/hwmon/gxp-fan-ctrl.c +++ b/drivers/hwmon/gxp-fan-ctrl.c @@ -6,7 +6,7 @@ #include <linux/hwmon.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> #include <linux/platform_device.h> #define OFS_FAN_INST 0 /* Is 0 because plreg base will be set at INST */ diff --git a/drivers/hwmon/hp-wmi-sensors.c b/drivers/hwmon/hp-wmi-sensors.c index ebe2fb513480..17ae62f88bbf 100644 --- a/drivers/hwmon/hp-wmi-sensors.c +++ b/drivers/hwmon/hp-wmi-sensors.c @@ -435,25 +435,11 @@ static union acpi_object *hp_wmi_get_wobj(const char *guid, u8 instance) /* hp_wmi_wobj_instance_count - find count of WMI object instances */ static u8 hp_wmi_wobj_instance_count(const char *guid) { - u8 hi = HP_WMI_MAX_INSTANCES; - union acpi_object *wobj; - u8 lo = 0; - u8 mid; - - while (lo < hi) { - mid = (lo + hi) / 2; + int count; - wobj = hp_wmi_get_wobj(guid, mid); - if (!wobj) { - hi = mid; - continue; - } + count = wmi_instance_count(guid); - lo = mid + 1; - kfree(wobj); - } - - return lo; + return clamp(count, 0, (int)HP_WMI_MAX_INSTANCES); } static int check_wobj(const union acpi_object *wobj, @@ -1927,7 +1913,7 @@ static bool add_event_handler(struct hp_wmi_sensors *state) static int hp_wmi_sensors_init(struct hp_wmi_sensors *state) { struct hp_wmi_info *connected[HP_WMI_MAX_INSTANCES]; - struct hp_wmi_platform_events *pevents; + struct hp_wmi_platform_events *pevents = NULL; struct device *dev = &state->wdev->dev; struct hp_wmi_info *info; struct device *hwdev; diff --git a/drivers/hwmon/hs3001.c b/drivers/hwmon/hs3001.c new file mode 100644 index 000000000000..ac574e46d069 --- /dev/null +++ b/drivers/hwmon/hs3001.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * This is a non-complete driver implementation for the + * HS3001 humidity and temperature sensor and compatibles. It does not include + * the configuration possibilities, where it needs to be set to 'programming mode' + * during power-up. + * + * + * Copyright (C) 2023 SYS TEC electronic AG + * Author: Andre Werner <andre.werner@systec-electronic.com> + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* Measurement times */ +#define HS3001_WAKEUP_TIME 100 /* us */ +#define HS3001_8BIT_RESOLUTION 550 /* us */ +#define HS3001_10BIT_RESOLUTION 1310 /* us */ +#define HS3001_12BIT_RESOLUTION 4500 /* us */ +#define HS3001_14BIT_RESOLUTION 16900 /* us */ + +#define HS3001_RESPONSE_LENGTH 4 + +#define HS3001_FIXPOINT_ARITH 1000U + +#define HS3001_MASK_HUMIDITY_0X3FFF GENMASK(13, 0) +#define HS3001_MASK_STATUS_0XC0 GENMASK(7, 6) + +/* Definitions for Status Bits of A/D Data */ +#define HS3001_DATA_VALID 0x00 /* Valid Data */ +#define HS3001_DATA_STALE 0x01 /* Stale Data */ + +struct hs3001_data { + struct i2c_client *client; + struct mutex i2c_lock; /* lock for sending i2c commands */ + u32 wait_time; /* in us */ + int temperature; /* in milli degree */ + u32 humidity; /* in milli % */ +}; + +static int hs3001_extract_temperature(u16 raw) +{ + /* fixpoint arithmetic 1 digit */ + u32 temp = (raw >> 2) * HS3001_FIXPOINT_ARITH * 165; + + temp /= (1 << 14) - 1; + + return (int)temp - 40 * HS3001_FIXPOINT_ARITH; +} + +static u32 hs3001_extract_humidity(u16 raw) +{ + u32 hum = (raw & HS3001_MASK_HUMIDITY_0X3FFF) * HS3001_FIXPOINT_ARITH * 100; + + return hum /= (1 << 14) - 1; +} + +static int hs3001_data_fetch_command(struct i2c_client *client, + struct hs3001_data *data) +{ + int ret; + u8 buf[HS3001_RESPONSE_LENGTH]; + u8 hs3001_status; + + ret = i2c_master_recv(client, buf, HS3001_RESPONSE_LENGTH); + if (ret != HS3001_RESPONSE_LENGTH) { + ret = ret < 0 ? ret : -EIO; + dev_dbg(&client->dev, + "Error in i2c communication. Error code: %d.\n", ret); + return ret; + } + + hs3001_status = FIELD_GET(HS3001_MASK_STATUS_0XC0, buf[0]); + if (hs3001_status == HS3001_DATA_STALE) { + dev_dbg(&client->dev, "Sensor busy.\n"); + return -EBUSY; + } + if (hs3001_status != HS3001_DATA_VALID) { + dev_dbg(&client->dev, "Data invalid.\n"); + return -EIO; + } + + data->humidity = + hs3001_extract_humidity(be16_to_cpup((__be16 *)&buf[0])); + data->temperature = + hs3001_extract_temperature(be16_to_cpup((__be16 *)&buf[2])); + + return 0; +} + +static umode_t hs3001_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + /* Both, humidity and temperature can only be read. */ + return 0444; +} + +static int hs3001_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct hs3001_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret; + + mutex_lock(&data->i2c_lock); + ret = i2c_master_send(client, NULL, 0); + if (ret < 0) { + mutex_unlock(&data->i2c_lock); + return ret; + } + + /* + * Sensor needs some time to process measurement depending on + * resolution (ref. datasheet) + */ + fsleep(data->wait_time); + + ret = hs3001_data_fetch_command(client, data); + mutex_unlock(&data->i2c_lock); + + if (ret < 0) + return ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + *val = data->temperature; + break; + default: + return -EINVAL; + } + break; + case hwmon_humidity: + switch (attr) { + case hwmon_humidity_input: + *val = data->humidity; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct hwmon_channel_info *hs3001_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT), + NULL +}; + +static const struct hwmon_ops hs3001_hwmon_ops = { + .is_visible = hs3001_is_visible, + .read = hs3001_read, +}; + +static const struct hwmon_chip_info hs3001_chip_info = { + .ops = &hs3001_hwmon_ops, + .info = hs3001_info, +}; + +/* device ID table */ +static const struct i2c_device_id hs3001_ids[] = { + { "hs3001", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, hs3001_ids); + +static const struct of_device_id hs3001_of_match[] = { + {.compatible = "renesas,hs3001"}, + { }, +}; + +MODULE_DEVICE_TABLE(of, hs3001_of_match); + +static int hs3001_probe(struct i2c_client *client) +{ + struct hs3001_data *data; + struct device *hwmon_dev; + struct device *dev = &client->dev; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + + /* + * Measurement time = wake-up time + measurement time temperature + * + measurement time humidity. This is currently static, because + * enabling programming mode is not supported, yet. + */ + data->wait_time = (HS3001_WAKEUP_TIME + HS3001_14BIT_RESOLUTION + + HS3001_14BIT_RESOLUTION); + + mutex_init(&data->i2c_lock); + + hwmon_dev = devm_hwmon_device_register_with_info(dev, + client->name, + data, + &hs3001_chip_info, + NULL); + + if (IS_ERR(hwmon_dev)) + return dev_err_probe(dev, PTR_ERR(hwmon_dev), + "Unable to register hwmon device.\n"); + + return 0; +} + +static struct i2c_driver hs3001_i2c_driver = { + .driver = { + .name = "hs3001", + .of_match_table = hs3001_of_match, + }, + .probe = hs3001_probe, + .id_table = hs3001_ids, +}; + +module_i2c_driver(hs3001_i2c_driver); + +MODULE_AUTHOR("Andre Werner <andre.werner@systec-electronic.com>"); +MODULE_DESCRIPTION("HS3001 humidity and temperature sensor base driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index cfd7efef5cdf..d8415d1f21fc 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -31,7 +31,6 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/jiffies.h> -#include <linux/of_device.h> #include <linux/of.h> #include <linux/delay.h> #include <linux/util_macros.h> @@ -625,7 +624,7 @@ static int ina2xx_probe(struct i2c_client *client) enum ina2xx_ids chip; if (client->dev.of_node) - chip = (enum ina2xx_ids)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = i2c_match_id(ina2xx_id, client)->driver_data; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 5deff5e5f693..fbe86cec6055 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -221,6 +221,10 @@ static bool fix_pwm_polarity; * Super-I/O configuration space. */ #define IT87_REG_VID 0x0a + +/* Interface Selection register on other chips */ +#define IT87_REG_IFSEL 0x0a + /* * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b * for fan divisors. Later IT8712F revisions must use 16-bit tachometer @@ -1159,28 +1163,66 @@ static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0); static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0); +static int get_temp_type(struct it87_data *data, int index) +{ + /* + * 2 is deprecated; + * 3 = thermal diode; + * 4 = thermistor; + * 5 = AMDTSI; + * 6 = Intel PECI; + * 0 = disabled + */ + u8 reg, extra; + int ttype, type = 0; + + /* Detect PECI vs. AMDTSI */ + ttype = 6; + if ((has_temp_peci(data, index)) || data->type == it8721 || + data->type == it8720) { + extra = it87_read_value(data, IT87_REG_IFSEL); + if ((extra & 0x70) == 0x40) + ttype = 5; + } + + reg = it87_read_value(data, IT87_REG_TEMP_ENABLE); + + /* Per chip special detection */ + switch (data->type) { + case it8622: + if (!(reg & 0xc0) && index == 3) + type = ttype; + break; + default: + break; + } + + if (type || index >= 3) + return type; + + extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); + + if ((has_temp_peci(data, index) && (reg >> 6 == index + 1)) || + (has_temp_old_peci(data, index) && (extra & 0x80))) + type = ttype; /* Intel PECI or AMDTSI */ + else if (reg & BIT(index)) + type = 3; /* thermal diode */ + else if (reg & BIT(index + 3)) + type = 4; /* thermistor */ + + return type; +} + static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); - u8 reg, extra; if (IS_ERR(data)) return PTR_ERR(data); - reg = data->sensor; /* In case value is updated while used */ - extra = data->extra; - - if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) || - (has_temp_old_peci(data, nr) && (extra & 0x80))) - return sprintf(buf, "6\n"); /* Intel PECI */ - if (reg & (1 << nr)) - return sprintf(buf, "3\n"); /* thermal diode */ - if (reg & (8 << nr)) - return sprintf(buf, "4\n"); /* thermistor */ - return sprintf(buf, "0\n"); /* disabled */ + return sprintf(buf, "%d\n", get_temp_type(data, sensor_attr->index)); } static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, @@ -2313,6 +2355,12 @@ static umode_t it87_temp_is_visible(struct kobject *kobj, if (!(data->has_temp & BIT(i))) return 0; + if (a == 3) { + if (get_temp_type(data, i) == 0) + return 0; + return attr->mode; + } + if (a == 5 && !has_temp_offset(data)) return 0; diff --git a/drivers/hwmon/lan966x-hwmon.c b/drivers/hwmon/lan966x-hwmon.c index f8658359a098..7247c03e4f44 100644 --- a/drivers/hwmon/lan966x-hwmon.c +++ b/drivers/hwmon/lan966x-hwmon.c @@ -334,24 +334,6 @@ static struct regmap *lan966x_init_regmap(struct platform_device *pdev, return devm_regmap_init_mmio(&pdev->dev, base, ®map_config); } -static void lan966x_clk_disable(void *data) -{ - struct lan966x_hwmon *hwmon = data; - - clk_disable_unprepare(hwmon->clk); -} - -static int lan966x_clk_enable(struct device *dev, struct lan966x_hwmon *hwmon) -{ - int ret; - - ret = clk_prepare_enable(hwmon->clk); - if (ret) - return ret; - - return devm_add_action_or_reset(dev, lan966x_clk_disable, hwmon); -} - static int lan966x_hwmon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -363,15 +345,11 @@ static int lan966x_hwmon_probe(struct platform_device *pdev) if (!hwmon) return -ENOMEM; - hwmon->clk = devm_clk_get(dev, NULL); + hwmon->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(hwmon->clk)) return dev_err_probe(dev, PTR_ERR(hwmon->clk), "failed to get clock\n"); - ret = lan966x_clk_enable(dev, hwmon); - if (ret) - return dev_err_probe(dev, ret, "failed to enable clock\n"); - hwmon->clk_rate = clk_get_rate(hwmon->clk); hwmon->regmap_pvt = lan966x_init_regmap(pdev, "pvt"); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 6972454eb4e0..0878a044dd8e 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -33,7 +33,7 @@ #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/sysfs.h> #include <linux/types.h> @@ -1105,7 +1105,7 @@ static int lm63_probe(struct i2c_client *client) /* Set the device type */ if (client->dev.of_node) - data->kind = (enum chips)of_device_get_match_data(&client->dev); + data->kind = (uintptr_t)of_device_get_match_data(&client->dev); else data->kind = i2c_match_id(lm63_id, client)->driver_data; if (data->kind == lm64) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 72e634d1b857..5b2ea05c951e 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -13,7 +13,6 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> -#include <linux/of_device.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/util_macros.h> @@ -579,7 +578,7 @@ static int lm75_probe(struct i2c_client *client) enum lm75_type kind; if (client->dev.of_node) - kind = (enum lm75_type)of_device_get_match_data(&client->dev); + kind = (uintptr_t)of_device_get_match_data(&client->dev); else kind = i2c_match_id(lm75_ids, client)->driver_data; diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 8540178f5b74..68c210002357 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -12,7 +12,7 @@ */ #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> @@ -1559,7 +1559,7 @@ static int lm85_probe(struct i2c_client *client) data->client = client; if (client->dev.of_node) - data->type = (enum chips)of_device_get_match_data(&client->dev); + data->type = (uintptr_t)of_device_get_match_data(&client->dev); else data->type = i2c_match_id(lm85_id, client)->driver_data; mutex_init(&data->update_lock); diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 90101c236f35..e0d7454a301c 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -106,7 +106,7 @@ #include <linux/kstrtox.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -2765,7 +2765,7 @@ static int lm90_probe(struct i2c_client *client) /* Set the device type */ if (client->dev.of_node) - data->kind = (enum chips)of_device_get_match_data(&client->dev); + data->kind = (uintptr_t)of_device_get_match_data(&client->dev); else data->kind = i2c_match_id(lm90_id, client)->driver_data; diff --git a/drivers/hwmon/lochnagar-hwmon.c b/drivers/hwmon/lochnagar-hwmon.c index 6350904a8a8b..5202dddfd61e 100644 --- a/drivers/hwmon/lochnagar-hwmon.c +++ b/drivers/hwmon/lochnagar-hwmon.c @@ -16,7 +16,6 @@ #include <linux/mfd/lochnagar2_regs.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> diff --git a/drivers/hwmon/ltq-cputemp.c b/drivers/hwmon/ltq-cputemp.c index 08e09a82acab..f7e4a4ca5239 100644 --- a/drivers/hwmon/ltq-cputemp.c +++ b/drivers/hwmon/ltq-cputemp.c @@ -9,8 +9,9 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/init.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/platform_device.h> #include <lantiq_soc.h> diff --git a/drivers/hwmon/max31730.c b/drivers/hwmon/max31730.c index b1300ca9db1f..7d237db6e57c 100644 --- a/drivers/hwmon/max31730.c +++ b/drivers/hwmon/max31730.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/hwmon.h> #include <linux/module.h> -#include <linux/of_device.h> #include <linux/of.h> #include <linux/slab.h> diff --git a/drivers/hwmon/max6621.c b/drivers/hwmon/max6621.c index 7f709fd1af89..af7e62685898 100644 --- a/drivers/hwmon/max6621.c +++ b/drivers/hwmon/max6621.c @@ -12,7 +12,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regmap.h> #define MAX6621_DRV_NAME "max6621" diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index caf527154fca..aa7f21ab2395 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -618,11 +618,17 @@ MODULE_DEVICE_TABLE(i2c, max6639_id); static DEFINE_SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume); +static const struct of_device_id max6639_of_match[] = { + { .compatible = "maxim,max6639", }, + { }, +}; + static struct i2c_driver max6639_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "max6639", .pm = pm_sleep_ptr(&max6639_pm_ops), + .of_match_table = max6639_of_match, }, .probe = max6639_probe, .id_table = max6639_id, diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c index 3a67778f111c..7d10dd434f2e 100644 --- a/drivers/hwmon/max6697.c +++ b/drivers/hwmon/max6697.c @@ -15,7 +15,6 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/of_device.h> #include <linux/of.h> #include <linux/platform_data/max6697.h> @@ -703,7 +702,7 @@ static int max6697_probe(struct i2c_client *client) return -ENOMEM; if (client->dev.of_node) - data->type = (enum chips)of_device_get_match_data(&client->dev); + data->type = (uintptr_t)of_device_get_match_data(&client->dev); else data->type = i2c_match_id(max6697_id, client)->driver_data; data->chip = &max6697_chip_data[data->type]; diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c index 127e15ff3e76..9814eaf24564 100644 --- a/drivers/hwmon/mcp3021.c +++ b/drivers/hwmon/mcp3021.c @@ -20,7 +20,6 @@ #include <linux/err.h> #include <linux/device.h> #include <linux/of.h> -#include <linux/of_device.h> /* Vdd / reference voltage in millivolt */ #define MCP3021_VDD_REF_MAX 5500 diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index c2a96468c9b4..a5f89aab3fb4 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -12,7 +12,7 @@ #include <linux/regmap.h> #include <linux/thermal.h> -#define MLXREG_FAN_MAX_TACHO 14 +#define MLXREG_FAN_MAX_TACHO 24 #define MLXREG_FAN_MAX_PWM 4 #define MLXREG_FAN_PWM_NOT_CONNECTED 0xff #define MLXREG_FAN_MAX_STATE 10 @@ -300,6 +300,16 @@ static const struct hwmon_channel_info * const mlxreg_fan_hwmon_info[] = { HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT), HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT, diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index 08ce4984151d..02a71244fc3b 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -33,7 +33,8 @@ * (0xd451) * nct6798d 14 7 7 2+6 0xd428 0xc1 0x5ca3 * (0xd429) - * nct6799d 14 7 7 2+6 0xd802 0xc1 0x5ca3 + * nct6796d-s 18 7 7 6+2 0xd801 0xc1 0x5ca3 + * nct6799d-r 18 7 7 6+2 0xd802 0xc1 0x5ca3 * * #temp lists the number of monitored temperature sources (first value) plus * the number of directly connectable temperature sensors (second value). @@ -79,14 +80,17 @@ static const char * const nct6775_device_names[] = { /* Common and NCT6775 specific data */ -/* Voltage min/max registers for nr=7..14 are in bank 5 */ +/* + * Voltage min/max registers for nr=7..14 are in bank 5 + * min/max: 15-17 for NCT6799 only + */ static const u16 NCT6775_REG_IN_MAX[] = { 0x2b, 0x2d, 0x2f, 0x31, 0x33, 0x35, 0x37, 0x554, 0x556, 0x558, 0x55a, - 0x55c, 0x55e, 0x560, 0x562 }; + 0x55c, 0x55e, 0x560, 0x562, 0x564, 0x570, 0x572 }; static const u16 NCT6775_REG_IN_MIN[] = { 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x555, 0x557, 0x559, 0x55b, - 0x55d, 0x55f, 0x561, 0x563 }; + 0x55d, 0x55f, 0x561, 0x563, 0x565, 0x571, 0x573 }; static const u16 NCT6775_REG_IN[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x550, 0x551, 0x552 }; @@ -97,31 +101,23 @@ static const u16 NCT6775_REG_IN[] = { static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B }; -/* 0..15 voltages, 16..23 fans, 24..29 temperatures, 30..31 intrusion */ - -static const s8 NCT6775_ALARM_BITS[] = { - 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ - 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ - -1, /* unused */ - 6, 7, 11, -1, -1, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ - 12, -1 }; /* intrusion0, intrusion1 */ +static const s8 NCT6775_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 8, 21, 20, 16, 17, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, -1, /* intr0-intr1 */ +}; static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e }; -/* - * 0..14 voltages, 15 global beep enable, 16..23 fans, 24..29 temperatures, - * 30..31 intrusion - */ -static const s8 NCT6775_BEEP_BITS[] = { - 0, 1, 2, 3, 8, 9, 10, 16, /* in0.. in7 */ - 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ - 21, /* global beep enable */ - 6, 7, 11, 28, -1, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ - 12, -1 }; /* intrusion0, intrusion1 */ +static const s8 NCT6775_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 8, 9, 10, 16, 17, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, 28, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, -1, 21 /* intr0-intr1, beep_en */ +}; /* DC or PWM output fan configuration */ static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 }; @@ -255,25 +251,24 @@ static const u16 NCT6775_REG_TSI_TEMP[] = { 0x669 }; #define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME #define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME -static const s8 NCT6776_ALARM_BITS[] = { - 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ - 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ - -1, /* unused */ - 6, 7, 11, 10, 23, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ - 12, 9 }; /* intrusion0, intrusion1 */ - -static const u16 NCT6776_REG_BEEP[NUM_REG_BEEP] = { 0xb2, 0xb3, 0xb4, 0xb5 }; - -static const s8 NCT6776_BEEP_BITS[] = { - 0, 1, 2, 3, 4, 5, 6, 7, /* in0.. in7 */ - 8, -1, -1, -1, -1, -1, -1, /* in8..in14 */ - 24, /* global beep enable */ - 25, 26, 27, 28, 29, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ - 30, 31 }; /* intrusion0, intrusion1 */ +static const s8 NCT6776_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 8, 21, 20, 16, 17, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, 10, 23, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, 9, /* intr0-intr1 */ +}; + +/* 0xbf: nct6799 only */ +static const u16 NCT6776_REG_BEEP[NUM_REG_BEEP] = { 0xb2, 0xb3, 0xb4, 0xb5, 0xbf }; + +static const s8 NCT6776_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 30, 31, 24 /* intr0-intr1, beep_en */ +}; static const u16 NCT6776_REG_TOLERANCE_H[] = { 0x10c, 0x20c, 0x30c, 0x80c, 0x90c, 0xa0c, 0xb0c }; @@ -337,30 +332,35 @@ static const u16 NCT6776_REG_TSI_TEMP[] = { /* NCT6779 specific data */ +/* + * 15-17 for NCT6799 only, register labels are: + * CPUVC, VIN1, AVSB, 3VCC, VIN0, VIN8, VIN4, 3VSB + * VBAT, VTT, VIN5, VIN6, VIN2, VIN3, VIN7, VIN9 + * VHIF, VIN10 + */ static const u16 NCT6779_REG_IN[] = { 0x480, 0x481, 0x482, 0x483, 0x484, 0x485, 0x486, 0x487, - 0x488, 0x489, 0x48a, 0x48b, 0x48c, 0x48d, 0x48e }; + 0x488, 0x489, 0x48a, 0x48b, 0x48c, 0x48d, 0x48e, 0x48f, + 0x470, 0x471}; static const u16 NCT6779_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B, 0x568 }; -static const s8 NCT6779_ALARM_BITS[] = { - 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ - 17, 24, 25, 26, 27, 28, 29, /* in8..in14 */ - -1, /* unused */ - 6, 7, 11, 10, 23, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ - 12, 9 }; /* intrusion0, intrusion1 */ - -static const s8 NCT6779_BEEP_BITS[] = { - 0, 1, 2, 3, 4, 5, 6, 7, /* in0.. in7 */ - 8, 9, 10, 11, 12, 13, 14, /* in8..in14 */ - 24, /* global beep enable */ - 25, 26, 27, 28, 29, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, -1, -1, -1, -1, /* temp1..temp6 */ - 30, 31 }; /* intrusion0, intrusion1 */ +static const s8 NCT6779_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 8, 21, 20, 16, 17, 24, 25, 26, /* in0-in11 */ + 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, 10, 23, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, 9, /* intr0-intr1 */ +}; + +static const s8 NCT6779_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, /* in0-in11 */ + 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 30, 31, 24 /* intr0-intr1, beep_en */ +}; static const u16 NCT6779_REG_FAN[] = { 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x4ce }; @@ -448,14 +448,13 @@ static const u16 NCT6791_REG_WEIGHT_DUTY_BASE[NUM_FAN] = { 0, 0x23e }; static const u16 NCT6791_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B, 0x568, 0x45D }; -static const s8 NCT6791_ALARM_BITS[] = { - 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ - 17, 24, 25, 26, 27, 28, 29, /* in8..in14 */ - -1, /* unused */ - 6, 7, 11, 10, 23, 33, /* fan1..fan6 */ - -1, -1, /* unused */ - 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ - 12, 9 }; /* intrusion0, intrusion1 */ +static const s8 NCT6791_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 8, 21, 20, 16, 17, 24, 25, 26, /* in0-in11 */ + 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, 10, 23, 33, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 13, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, 9, /* intr0-intr1 */ +}; /* NCT6792/NCT6793 specific data */ @@ -618,6 +617,28 @@ static const char *const nct6796_temp_label[] = { static const u16 NCT6796_REG_TSI_TEMP[] = { 0x409, 0x40b }; +static const u16 NCT6798_REG_TEMP[] = { + 0x27, 0x150, 0x670, 0x672, 0x674, 0x676, 0x678, 0x67a}; + +static const u16 NCT6798_REG_TEMP_SOURCE[] = { + 0x621, 0x622, 0xc26, 0xc27, 0xc28, 0xc29, 0xc2a, 0xc2b }; + +static const u16 NCT6798_REG_TEMP_MON[] = { + 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d, 0x4a0 }; +static const u16 NCT6798_REG_TEMP_OVER[] = { + 0x39, 0x155, 0xc1a, 0xc1b, 0xc1c, 0xc1d, 0xc1e, 0xc1f }; +static const u16 NCT6798_REG_TEMP_HYST[] = { + 0x3a, 0x153, 0xc20, 0xc21, 0xc22, 0xc23, 0xc24, 0xc25 }; + +static const u16 NCT6798_REG_TEMP_CRIT[32] = { + 0x135, 0x235, 0x335, 0x835, 0x935, 0xa35, 0xb35, 0 }; + +static const u16 NCT6798_REG_TEMP_ALTERNATE[32] = { + 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0x496, 0, + 0, 0, 0, 0, 0x4a2, 0, 0, 0, + 0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407, + 0x408, 0x419, 0x41a, 0x4f4, 0x4f5 }; + static const char *const nct6798_temp_label[] = { "", "SYSTIN", @@ -656,6 +677,26 @@ static const char *const nct6798_temp_label[] = { #define NCT6798_TEMP_MASK 0xbfff0ffe #define NCT6798_VIRT_TEMP_MASK 0x80000c00 +static const u16 NCT6799_REG_ALARM[NUM_REG_ALARM] = { + 0x459, 0x45A, 0x45B, 0x568, 0x45D, 0xc01 }; + +static const s8 NCT6799_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 8, -1, 20, 16, 17, 24, 25, 26, /* in0-in11 */ + 27, 28, 29, 30, 31, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 6, 7, 11, 10, 23, 33, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 4, 5, 40, 41, 42, 43, 44, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 12, 9, /* intr0-intr1 */ +}; + +static const s8 NCT6799_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, /* in0-in11 */ + 12, 13, 14, 15, 34, 35, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 25, 26, 27, 28, 29, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, 19, 20, 21, 22, 23, -1, -1, -1, -1, /* temp1-temp12 */ + 30, 31, 24 /* intr0-intr1, beep_en */ +}; + +/* PECI Calibration only for NCT6799D, not NCT6796D-S */ static const char *const nct6799_temp_label[] = { "", "SYSTIN", @@ -685,8 +726,8 @@ static const char *const nct6799_temp_label[] = { "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", - "PECI Agent 0 Calibration", /* undocumented */ - "PECI Agent 1 Calibration", /* undocumented */ + "PECI/TSI Agent 0 Calibration", + "PECI/TSI Agent 1 Calibration", "", "Virtual_TEMP" }; @@ -763,27 +804,23 @@ static const u16 NCT6106_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184 }; static const u16 NCT6106_REG_ALARM[NUM_REG_ALARM] = { 0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d }; -static const s8 NCT6106_ALARM_BITS[] = { - 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ - 9, -1, -1, -1, -1, -1, -1, /* in8..in14 */ - -1, /* unused */ - 32, 33, 34, -1, -1, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ - 48, -1 /* intrusion0, intrusion1 */ +static const s8 NCT6106_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 4, 5, 7, 8, 9, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 32, 33, 34, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 48, -1, /* intr0-intr1 */ }; static const u16 NCT6106_REG_BEEP[NUM_REG_BEEP] = { 0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4 }; -static const s8 NCT6106_BEEP_BITS[] = { - 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ - 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */ - 32, /* global beep enable */ - 24, 25, 26, 27, 28, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ - 34, -1 /* intrusion0, intrusion1 */ +static const s8 NCT6106_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 24, 25, 26, 27, 28, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, 19, 20, 21, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 34, -1, 32 /* intr0-intr1, beep_en */ }; static const u16 NCT6106_REG_TEMP_ALTERNATE[32] = { @@ -843,24 +880,20 @@ static const u16 NCT6116_REG_AUTO_TEMP[] = { static const u16 NCT6116_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184, 0x1d4, 0x1e4 }; -static const s8 NCT6116_ALARM_BITS[] = { - 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ - 9, -1, -1, -1, -1, -1, -1, /* in8..in9 */ - -1, /* unused */ - 32, 33, 34, 35, 36, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, 18, -1, -1, -1, /* temp1..temp6 */ - 48, -1 /* intrusion0, intrusion1 */ +static const s8 NCT6116_ALARM_BITS[NUM_ALARM_BITS] = { + 0, 1, 2, 3, 4, 5, 7, 8, 9, -1, -1, -1, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 32, 33, 34, 35, 36, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 48, -1, /* intr0-intr1 */ }; -static const s8 NCT6116_BEEP_BITS[] = { - 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ - 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */ - 32, /* global beep enable */ - 24, 25, 26, 27, 28, /* fan1..fan5 */ - -1, -1, -1, /* unused */ - 16, 17, 18, -1, -1, -1, /* temp1..temp6 */ - 34, -1 /* intrusion0, intrusion1 */ +static const s8 NCT6116_BEEP_BITS[NUM_BEEP_BITS] = { + 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, /* in0-in11 */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* in12-in23 */ + 24, 25, 26, 27, 28, -1, -1, -1, -1, -1, -1, -1, /* fan1-fan12 */ + 16, 17, 18, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* temp1-temp12 */ + 34, -1, 32 /* intr0-intr1, beep_en */ }; static const u16 NCT6116_REG_TSI_TEMP[] = { 0x59, 0x5b }; @@ -958,12 +991,12 @@ static const u16 scale_in[15] = { /* * NCT6798 scaling: * CPUVC, IN1, AVSB, 3VCC, IN0, IN8, IN4, 3VSB, VBAT, VTT, IN5, IN6, IN2, - * IN3, IN7 - * Additional scales to be added later: IN9 (800), VHIF (1600) + * IN3, IN7, IN9, VHIF, IN10 + * 15-17 for NCT6799 only */ -static const u16 scale_in_6798[15] = { +static const u16 scale_in_6798[NUM_IN] = { 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 1600, 1600, 1600, 800, - 800, 800 + 800, 800, 800, 1600, 800 }; static inline long in_from_reg(u8 reg, u8 nr, const u16 *scales) @@ -3862,13 +3895,9 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, case nct6795: case nct6796: case nct6797: - case nct6798: - case nct6799: data->in_num = 15; data->pwm_num = (data->kind == nct6796 || - data->kind == nct6797 || - data->kind == nct6798 || - data->kind == nct6799) ? 7 : 6; + data->kind == nct6797) ? 7 : 6; data->auto_pwm_num = 4; data->has_fan_div = false; data->temp_fixed_num = 6; @@ -3912,16 +3941,6 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, data->temp_mask = NCT6796_TEMP_MASK; data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK; break; - case nct6798: - data->temp_label = nct6798_temp_label; - data->temp_mask = NCT6798_TEMP_MASK; - data->virt_temp_mask = NCT6798_VIRT_TEMP_MASK; - break; - case nct6799: - data->temp_label = nct6799_temp_label; - data->temp_mask = NCT6799_TEMP_MASK; - data->virt_temp_mask = NCT6799_VIRT_TEMP_MASK; - break; } data->REG_CONFIG = NCT6775_REG_CONFIG; @@ -3980,8 +3999,6 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, case nct6795: case nct6796: case nct6797: - case nct6798: - case nct6799: data->REG_TSI_TEMP = NCT6796_REG_TSI_TEMP; num_reg_tsi_temp = ARRAY_SIZE(NCT6796_REG_TSI_TEMP); break; @@ -3990,9 +4007,6 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, break; } - if (data->kind == nct6798 || data->kind == nct6799) - data->scale_in = scale_in_6798; - reg_temp = NCT6779_REG_TEMP; num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); if (data->kind == nct6791) { @@ -4009,6 +4023,95 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_crit = NCT6779_REG_TEMP_CRIT; break; + case nct6798: + case nct6799: + data->in_num = data->kind == nct6799 ? 18 : 15; + data->scale_in = scale_in_6798; + data->pwm_num = 7; + data->auto_pwm_num = 4; + data->has_fan_div = false; + data->temp_fixed_num = 6; + data->num_temp_alarms = 7; + data->num_temp_beeps = 8; + + data->ALARM_BITS = NCT6799_ALARM_BITS; + data->BEEP_BITS = NCT6799_BEEP_BITS; + + data->fan_from_reg = fan_from_reg_rpm; + data->fan_from_reg_min = fan_from_reg13; + data->target_temp_mask = 0xff; + data->tolerance_mask = 0x07; + data->speed_tolerance_limit = 63; + + switch (data->kind) { + default: + case nct6798: + data->temp_label = nct6798_temp_label; + data->temp_mask = NCT6798_TEMP_MASK; + data->virt_temp_mask = NCT6798_VIRT_TEMP_MASK; + break; + case nct6799: + data->temp_label = nct6799_temp_label; + data->temp_mask = NCT6799_TEMP_MASK; + data->virt_temp_mask = NCT6799_VIRT_TEMP_MASK; + break; + } + + data->REG_CONFIG = NCT6775_REG_CONFIG; + data->REG_VBAT = NCT6775_REG_VBAT; + data->REG_DIODE = NCT6775_REG_DIODE; + data->DIODE_MASK = NCT6775_DIODE_MASK; + data->REG_VIN = NCT6779_REG_IN; + data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; + data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; + data->REG_TARGET = NCT6775_REG_TARGET; + data->REG_FAN = NCT6779_REG_FAN; + data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; + data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; + data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; + data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; + data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; + data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; + data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; + data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; + data->REG_PWM[0] = NCT6775_REG_PWM; + data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; + data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; + data->REG_PWM[5] = NCT6791_REG_WEIGHT_DUTY_STEP; + data->REG_PWM[6] = NCT6791_REG_WEIGHT_DUTY_BASE; + data->REG_PWM_READ = NCT6775_REG_PWM_READ; + data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; + data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; + data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; + data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; + data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; + data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; + data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; + data->CRITICAL_PWM_ENABLE_MASK = NCT6779_CRITICAL_PWM_ENABLE_MASK; + data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; + data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; + data->REG_TEMP_SOURCE = NCT6798_REG_TEMP_SOURCE; + data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; + data->REG_WEIGHT_TEMP_SEL = NCT6791_REG_WEIGHT_TEMP_SEL; + data->REG_WEIGHT_TEMP[0] = NCT6791_REG_WEIGHT_TEMP_STEP; + data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL; + data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE; + data->REG_ALARM = NCT6799_REG_ALARM; + data->REG_BEEP = NCT6792_REG_BEEP; + data->REG_TSI_TEMP = NCT6796_REG_TSI_TEMP; + num_reg_tsi_temp = ARRAY_SIZE(NCT6796_REG_TSI_TEMP); + + reg_temp = NCT6798_REG_TEMP; + num_reg_temp = ARRAY_SIZE(NCT6798_REG_TEMP); + reg_temp_mon = NCT6798_REG_TEMP_MON; + num_reg_temp_mon = ARRAY_SIZE(NCT6798_REG_TEMP_MON); + reg_temp_over = NCT6798_REG_TEMP_OVER; + reg_temp_hyst = NCT6798_REG_TEMP_HYST; + reg_temp_config = NCT6779_REG_TEMP_CONFIG; + reg_temp_alternate = NCT6798_REG_TEMP_ALTERNATE; + reg_temp_crit = NCT6798_REG_TEMP_CRIT; + + break; default: return -ENODEV; } diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c index a409d7a0b813..81bf03dad6bb 100644 --- a/drivers/hwmon/nct6775-platform.c +++ b/drivers/hwmon/nct6775-platform.c @@ -35,7 +35,7 @@ static const char * const nct6775_sio_names[] __initconst = { "NCT6796D", "NCT6797D", "NCT6798D", - "NCT6799D", + "NCT6796D-S/NCT6799D-R", }; static unsigned short force_id; diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h index a84c6ce7275d..296eff99d003 100644 --- a/drivers/hwmon/nct6775.h +++ b/drivers/hwmon/nct6775.h @@ -8,7 +8,7 @@ enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, nct6795, nct6796, nct6797, nct6798, nct6799 }; enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; -#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ +#define NUM_TEMP 12 /* Max number of temp attribute sets w/ limits*/ #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ #define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ @@ -16,6 +16,7 @@ enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; #define NUM_REG_BEEP 5 /* Max number of beep registers */ #define NUM_FAN 7 +#define NUM_IN 18 struct nct6775_data { int addr; /* IO base of hw monitor block */ @@ -97,7 +98,7 @@ struct nct6775_data { /* Register values */ u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ - u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ + u8 in[NUM_IN][3]; /* [0]=in, [1]=in_max, [2]=in_min */ const u16 *scale_in; /* internal scaling factors */ unsigned int rpm[NUM_FAN]; u16 fan_min[NUM_FAN]; @@ -166,7 +167,7 @@ struct nct6775_data { u16 have_temp; u16 have_temp_fixed; u16 have_tsi_temp; - u16 have_in; + u32 have_in; /* Remember extra register values over suspend/resume */ u8 vbat; @@ -239,10 +240,25 @@ nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group * #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 -#define FAN_ALARM_BASE 16 -#define TEMP_ALARM_BASE 24 -#define INTRUSION_ALARM_BASE 30 -#define BEEP_ENABLE_BASE 15 +/* + * ALARM_BITS and BEEP_BITS store bit-index for the mask of the registers + * loaded into data->alarm and data->beep. + * + * Every input register (IN/TEMP/FAN) must have a corresponding + * ALARM/BEEP bit at the same index BITS[BASE + index] + * Set value to -1 to disable the visibility of that '*_alarm' attribute and + * to pad the bits until the next BASE + * + * Beep has an additional GLOBAL_BEEP_ENABLE bit + */ +#define VIN_ALARM_BASE 0 +#define FAN_ALARM_BASE 24 +#define TEMP_ALARM_BASE 36 +#define INTRUSION_ALARM_BASE 48 +#define BEEP_ENABLE_BASE 50 + +#define NUM_ALARM_BITS (INTRUSION_ALARM_BASE + 4) +#define NUM_BEEP_BITS (BEEP_ENABLE_BASE + 1) /* * Not currently used: diff --git a/drivers/hwmon/nsa320-hwmon.c b/drivers/hwmon/nsa320-hwmon.c index ebe6b031e56f..18076ba7fc14 100644 --- a/drivers/hwmon/nsa320-hwmon.c +++ b/drivers/hwmon/nsa320-hwmon.c @@ -20,8 +20,6 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> /* Tests for error return values rely upon this value being < 0x80 */ @@ -193,7 +191,7 @@ static struct platform_driver nsa320_hwmon_driver = { .probe = nsa320_hwmon_probe, .driver = { .name = "nsa320-hwmon", - .of_match_table = of_match_ptr(of_nsa320_hwmon_match), + .of_match_table = of_nsa320_hwmon_match, }, }; diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c index 1e1cc67bcdea..ea9602063eab 100644 --- a/drivers/hwmon/oxp-sensors.c +++ b/drivers/hwmon/oxp-sensors.c @@ -434,23 +434,9 @@ static const struct hwmon_chip_info oxp_ec_chip_info = { /* Initialization logic */ static int oxp_platform_probe(struct platform_device *pdev) { - const struct dmi_system_id *dmi_entry; struct device *dev = &pdev->dev; struct device *hwdev; - /* - * Have to check for AMD processor here because DMI strings are the - * same between Intel and AMD boards, the only way to tell them apart - * is the CPU. - * Intel boards seem to have different EC registers and values to - * read/write. - */ - dmi_entry = dmi_first_match(dmi_table); - if (!dmi_entry || boot_cpu_data.x86_vendor != X86_VENDOR_AMD) - return -ENODEV; - - board = (enum oxp_board)(unsigned long)dmi_entry->driver_data; - hwdev = devm_hwmon_device_register_with_info(dev, "oxpec", NULL, &oxp_ec_chip_info, NULL); @@ -469,6 +455,21 @@ static struct platform_device *oxp_platform_device; static int __init oxp_platform_init(void) { + const struct dmi_system_id *dmi_entry; + + /* + * Have to check for AMD processor here because DMI strings are the + * same between Intel and AMD boards, the only way to tell them apart + * is the CPU. + * Intel boards seem to have different EC registers and values to + * read/write. + */ + dmi_entry = dmi_first_match(dmi_table); + if (!dmi_entry || boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return -ENODEV; + + board = (enum oxp_board)(unsigned long)dmi_entry->driver_data; + oxp_platform_device = platform_create_bundle(&oxp_platform_driver, oxp_platform_probe, NULL, 0, NULL, 0); diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c index ed968401f93c..ce89da3937a0 100644 --- a/drivers/hwmon/peci/dimmtemp.c +++ b/drivers/hwmon/peci/dimmtemp.c @@ -219,19 +219,21 @@ static int check_populated_dimms(struct peci_dimmtemp *priv) { int chan_rank_max = priv->gen_info->chan_rank_max; int dimm_idx_max = priv->gen_info->dimm_idx_max; - u32 chan_rank_empty = 0; - u32 dimm_mask = 0; - int chan_rank, dimm_idx, ret; + DECLARE_BITMAP(dimm_mask, DIMM_NUMS_MAX); + DECLARE_BITMAP(chan_rank_empty, CHAN_RANK_MAX); + + int chan_rank, dimm_idx, ret, i; u32 pcs; - BUILD_BUG_ON(BITS_PER_TYPE(chan_rank_empty) < CHAN_RANK_MAX); - BUILD_BUG_ON(BITS_PER_TYPE(dimm_mask) < DIMM_NUMS_MAX); if (chan_rank_max * dimm_idx_max > DIMM_NUMS_MAX) { WARN_ONCE(1, "Unsupported number of DIMMs - chan_rank_max: %d, dimm_idx_max: %d", chan_rank_max, dimm_idx_max); return -EINVAL; } + bitmap_zero(dimm_mask, DIMM_NUMS_MAX); + bitmap_zero(chan_rank_empty, CHAN_RANK_MAX); + for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) { ret = peci_pcs_read(priv->peci_dev, PECI_PCS_DDR_DIMM_TEMP, chan_rank, &pcs); if (ret) { @@ -242,7 +244,7 @@ static int check_populated_dimms(struct peci_dimmtemp *priv) * detection to be performed at a later point in time. */ if (ret == -EINVAL) { - chan_rank_empty |= BIT(chan_rank); + bitmap_set(chan_rank_empty, chan_rank, 1); continue; } @@ -251,7 +253,7 @@ static int check_populated_dimms(struct peci_dimmtemp *priv) for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++) if (__dimm_temp(pcs, dimm_idx)) - dimm_mask |= BIT(chan_rank * dimm_idx_max + dimm_idx); + bitmap_set(dimm_mask, chan_rank * dimm_idx_max + dimm_idx, 1); } /* @@ -260,7 +262,7 @@ static int check_populated_dimms(struct peci_dimmtemp *priv) * host platform boot. Retrying a couple of times lets us make sure * that the state is persistent. */ - if (chan_rank_empty == GENMASK(chan_rank_max - 1, 0)) { + if (bitmap_full(chan_rank_empty, chan_rank_max)) { if (priv->no_dimm_retry_count < NO_DIMM_RETRY_COUNT_MAX) { priv->no_dimm_retry_count++; @@ -274,14 +276,16 @@ static int check_populated_dimms(struct peci_dimmtemp *priv) * It's possible that memory training is not done yet. In this case we * defer the detection to be performed at a later point in time. */ - if (!dimm_mask) { + if (bitmap_empty(dimm_mask, DIMM_NUMS_MAX)) { priv->no_dimm_retry_count = 0; return -EAGAIN; } - dev_dbg(priv->dev, "Scanned populated DIMMs: %#x\n", dimm_mask); + for_each_set_bit(i, dimm_mask, DIMM_NUMS_MAX) { + dev_dbg(priv->dev, "Found DIMM%#x\n", i); + } - bitmap_from_arr32(priv->dimm_mask, &dimm_mask, DIMM_NUMS_MAX); + bitmap_copy(priv->dimm_mask, dimm_mask, DIMM_NUMS_MAX); return 0; } diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 270b6336b76d..b4e93bd5835e 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -317,6 +317,13 @@ config SENSORS_MP2975 This driver can also be built as a module. If so, the module will be called mp2975. +config SENSORS_MP2975_REGULATOR + depends on SENSORS_MP2975 && REGULATOR + bool "Regulator support for MPS MP2975" + help + If you say yes here you get regulator support for MPS MP2975 + Dual Loop Digital Multi-Phase Controller. + config SENSORS_MP5023 tristate "MPS MP5023" help diff --git a/drivers/hwmon/pmbus/acbel-fsg032.c b/drivers/hwmon/pmbus/acbel-fsg032.c index 0a0ef4ce3493..e0c55fd8f3a6 100644 --- a/drivers/hwmon/pmbus/acbel-fsg032.c +++ b/drivers/hwmon/pmbus/acbel-fsg032.c @@ -3,14 +3,51 @@ * Copyright 2023 IBM Corp. */ +#include <linux/debugfs.h> #include <linux/device.h> #include <linux/fs.h> #include <linux/i2c.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/pmbus.h> #include <linux/hwmon-sysfs.h> #include "pmbus.h" +#define ACBEL_MFR_FW_REVISION 0xd9 + +static ssize_t acbel_fsg032_debugfs_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + struct i2c_client *client = file->private_data; + u8 data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 }; + char out[8]; + int rc; + + rc = i2c_smbus_read_block_data(client, ACBEL_MFR_FW_REVISION, data); + if (rc < 0) + return rc; + + rc = snprintf(out, sizeof(out), "%*phN\n", min(rc, 3), data); + return simple_read_from_buffer(buf, count, ppos, out, rc); +} + +static const struct file_operations acbel_debugfs_ops = { + .llseek = noop_llseek, + .read = acbel_fsg032_debugfs_read, + .write = NULL, + .open = simple_open, +}; + +static void acbel_fsg032_init_debugfs(struct i2c_client *client) +{ + struct dentry *debugfs = pmbus_get_debugfs_dir(client); + + if (!debugfs) + return; + + debugfs_create_file("fw_version", 0444, debugfs, client, &acbel_debugfs_ops); +} + static const struct i2c_device_id acbel_fsg032_id[] = { { "acbel_fsg032" }, {} @@ -59,6 +96,7 @@ static int acbel_fsg032_probe(struct i2c_client *client) if (rc) return rc; + acbel_fsg032_init_debugfs(client); return 0; } diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c index f7ff3e4650b7..04e0d598a6e5 100644 --- a/drivers/hwmon/pmbus/dps920ab.c +++ b/drivers/hwmon/pmbus/dps920ab.c @@ -9,7 +9,7 @@ #include <linux/debugfs.h> #include <linux/i2c.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include "pmbus.h" struct dps920ab_data { diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index c791925b8907..1ba4c5e95820 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -13,7 +13,7 @@ #include <linux/leds.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/pmbus.h> #include "pmbus.h" @@ -489,7 +489,7 @@ static int ibm_cffps_probe(struct i2c_client *client) const struct i2c_device_id *id; if (md) { - vs = (enum versions)md; + vs = (uintptr_t)md; } else { id = i2c_match_id(ibm_cffps_id, client); if (id) diff --git a/drivers/hwmon/pmbus/ir38064.c b/drivers/hwmon/pmbus/ir38064.c index 871c322d3d51..04185be3fdb6 100644 --- a/drivers/hwmon/pmbus/ir38064.c +++ b/drivers/hwmon/pmbus/ir38064.c @@ -6,7 +6,7 @@ * * VOUT_MODE is not supported by the device. The driver fakes VOUT linear16 * mode with exponent value -8 as direct mode with m=256/b=0/R=0. - * + * * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however * this driver does not currently support them. */ @@ -16,7 +16,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regulator/driver.h> #include "pmbus.h" diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c index 7bcf27995033..d56ec24764fd 100644 --- a/drivers/hwmon/pmbus/max20730.c +++ b/drivers/hwmon/pmbus/max20730.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/pmbus.h> #include <linux/util_macros.h> #include "pmbus.h" @@ -114,6 +114,7 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, const struct pmbus_driver_info *info; const struct max20730_data *data; char tbuf[DEBUG_FS_DATA_MAX] = { 0 }; + char *result = tbuf; u16 val; info = pmbus_get_driver_info(psu->client); @@ -148,13 +149,13 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, >> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS; if (val == 0) - len = strlcpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX); + result = "2000\n"; else if (val == 1) - len = strlcpy(tbuf, "125\n", DEBUG_FS_DATA_MAX); + result = "125\n"; else if (val == 2) - len = strlcpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX); + result = "62.5\n"; else - len = strlcpy(tbuf, "32\n", DEBUG_FS_DATA_MAX); + result = "32\n"; break; case MAX20730_DEBUGFS_INTERNAL_GAIN: val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK) @@ -163,35 +164,35 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, if (data->id == max20734) { /* AN6209 */ if (val == 0) - len = strlcpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX); + result = "0.8\n"; else if (val == 1) - len = strlcpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX); + result = "3.2\n"; else if (val == 2) - len = strlcpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX); + result = "1.6\n"; else - len = strlcpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX); + result = "6.4\n"; } else if (data->id == max20730 || data->id == max20710) { /* AN6042 or AN6140 */ if (val == 0) - len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX); + result = "0.9\n"; else if (val == 1) - len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX); + result = "3.6\n"; else if (val == 2) - len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX); + result = "1.8\n"; else - len = strlcpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX); + result = "7.2\n"; } else if (data->id == max20743) { /* AN6042 */ if (val == 0) - len = strlcpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX); + result = "0.45\n"; else if (val == 1) - len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX); + result = "1.8\n"; else if (val == 2) - len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX); + result = "0.9\n"; else - len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX); + result = "3.6\n"; } else { - len = strlcpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX); + result = "Not supported\n"; } break; case MAX20730_DEBUGFS_BOOT_VOLTAGE: @@ -199,26 +200,26 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, >> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS; if (val == 0) - len = strlcpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX); + result = "0.6484\n"; else if (val == 1) - len = strlcpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX); + result = "0.8984\n"; else if (val == 2) - len = strlcpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX); + result = "1.0\n"; else - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + result = "Invalid\n"; break; case MAX20730_DEBUGFS_OUT_V_RAMP_RATE: val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE) >> MAX20730_MFR_DEVSET2_VRATE_BIT_POS; if (val == 0) - len = strlcpy(tbuf, "4\n", DEBUG_FS_DATA_MAX); + result = "4\n"; else if (val == 1) - len = strlcpy(tbuf, "2\n", DEBUG_FS_DATA_MAX); + result = "2\n"; else if (val == 2) - len = strlcpy(tbuf, "1\n", DEBUG_FS_DATA_MAX); + result = "1\n"; else - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + result = "Invalid\n"; break; case MAX20730_DEBUGFS_OC_PROTECT_MODE: ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK) @@ -230,13 +231,13 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, >> MAX20730_MFR_DEVSET2_SS_BIT_POS; if (val == 0) - len = strlcpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX); + result = "0.75\n"; else if (val == 1) - len = strlcpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX); + result = "1.5\n"; else if (val == 2) - len = strlcpy(tbuf, "3\n", DEBUG_FS_DATA_MAX); + result = "3\n"; else - len = strlcpy(tbuf, "6\n", DEBUG_FS_DATA_MAX); + result = "6\n"; break; case MAX20730_DEBUGFS_IMAX: ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK) @@ -287,10 +288,11 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, "%d.%d\n", ret / 10000, ret % 10000); break; default: - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + result = "Invalid\n"; } - return simple_read_from_buffer(buf, count, ppos, tbuf, len); + len = strlen(result); + return simple_read_from_buffer(buf, count, ppos, result, len); } static const struct file_operations max20730_fops = { @@ -714,7 +716,7 @@ static int max20730_probe(struct i2c_client *client) } if (client->dev.of_node) - chip_id = (enum chips)of_device_get_match_data(dev); + chip_id = (uintptr_t)of_device_get_match_data(dev); else chip_id = i2c_match_id(max20730_id, client)->driver_data; diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index 2109b0458a8b..26ba50633100 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_device.h> #include "pmbus.h" /* Vendor specific registers. */ @@ -34,6 +35,8 @@ #define MP2975_MFR_OVP_TH_SET 0xe5 #define MP2975_MFR_UVP_SET 0xe6 +#define MP2973_MFR_RESO_SET 0xc7 + #define MP2975_VOUT_FORMAT BIT(15) #define MP2975_VID_STEP_SEL_R1 BIT(4) #define MP2975_IMVP9_EN_R1 BIT(13) @@ -48,43 +51,80 @@ #define MP2975_SENSE_AMPL_HALF 2 #define MP2975_VIN_UV_LIMIT_UNIT 8 +#define MP2973_VOUT_FORMAT_R1 GENMASK(7, 6) +#define MP2973_VOUT_FORMAT_R2 GENMASK(4, 3) +#define MP2973_VOUT_FORMAT_DIRECT_R1 BIT(7) +#define MP2973_VOUT_FORMAT_LINEAR_R1 BIT(6) +#define MP2973_VOUT_FORMAT_DIRECT_R2 BIT(4) +#define MP2973_VOUT_FORMAT_LINEAR_R2 BIT(3) + +#define MP2973_MFR_VR_MULTI_CONFIG_R1 0x0d +#define MP2973_MFR_VR_MULTI_CONFIG_R2 0x1d +#define MP2973_VID_STEP_SEL_R1 BIT(4) +#define MP2973_IMVP9_EN_R1 BIT(14) +#define MP2973_VID_STEP_SEL_R2 BIT(3) +#define MP2973_IMVP9_EN_R2 BIT(13) + +#define MP2973_MFR_OCP_TOTAL_SET 0x5f +#define MP2973_OCP_TOTAL_CUR_MASK GENMASK(6, 0) +#define MP2973_MFR_OCP_LEVEL_RES BIT(15) + +#define MP2973_MFR_READ_IOUT_PK 0x90 +#define MP2973_MFR_READ_POUT_PK 0x91 + #define MP2975_MAX_PHASE_RAIL1 8 #define MP2975_MAX_PHASE_RAIL2 4 + +#define MP2973_MAX_PHASE_RAIL1 14 +#define MP2973_MAX_PHASE_RAIL2 6 + +#define MP2971_MAX_PHASE_RAIL1 8 +#define MP2971_MAX_PHASE_RAIL2 3 + #define MP2975_PAGE_NUM 2 #define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \ PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL) +enum chips { + mp2971, mp2973, mp2975 +}; + +static const int mp2975_max_phases[][MP2975_PAGE_NUM] = { + [mp2975] = { MP2975_MAX_PHASE_RAIL1, MP2975_MAX_PHASE_RAIL2 }, + [mp2973] = { MP2973_MAX_PHASE_RAIL1, MP2973_MAX_PHASE_RAIL2 }, + [mp2971] = { MP2971_MAX_PHASE_RAIL1, MP2971_MAX_PHASE_RAIL2 }, +}; + struct mp2975_data { struct pmbus_driver_info info; + enum chips chip_id; int vout_scale; + int max_phases[MP2975_PAGE_NUM]; int vid_step[MP2975_PAGE_NUM]; int vref[MP2975_PAGE_NUM]; int vref_off[MP2975_PAGE_NUM]; int vout_max[MP2975_PAGE_NUM]; int vout_ov_fixed[MP2975_PAGE_NUM]; - int vout_format[MP2975_PAGE_NUM]; int curr_sense_gain[MP2975_PAGE_NUM]; }; -#define to_mp2975_data(x) container_of(x, struct mp2975_data, info) +static const struct i2c_device_id mp2975_id[] = { + {"mp2971", mp2971}, + {"mp2973", mp2973}, + {"mp2975", mp2975}, + {} +}; -static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg) -{ - switch (reg) { - case PMBUS_VOUT_MODE: - /* - * Enforce VOUT direct format, since device allows to set the - * different formats for the different rails. Conversion from - * VID to direct provided by driver internally, in case it is - * necessary. - */ - return PB_VOUT_MODE_DIRECT; - default: - return -ENODATA; - } -} +MODULE_DEVICE_TABLE(i2c, mp2975_id); + +static const struct regulator_desc __maybe_unused mp2975_reg_desc[] = { + PMBUS_REGULATOR("vout", 0), + PMBUS_REGULATOR("vout", 1), +}; + +#define to_mp2975_data(x) container_of(x, struct mp2975_data, info) static int mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg, @@ -117,6 +157,41 @@ mp2975_vid2direct(int vrf, int val) return 0; } +#define MAX_LIN_MANTISSA (1023 * 1000) +#define MIN_LIN_MANTISSA (511 * 1000) + +/* Converts a milli-unit DIRECT value to LINEAR11 format */ +static u16 mp2975_data2reg_linear11(s64 val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_LIN_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_LIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff); + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + static int mp2975_read_phase(struct i2c_client *client, struct mp2975_data *data, int page, int phase, u8 reg) @@ -214,6 +289,89 @@ mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data, return ret; } +static int mp2973_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2975_data *data = to_mp2975_data(info); + int ret; + + switch (reg) { + case PMBUS_OT_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * MP2971 and mp2973 only supports tracking (ovp1) mode. + */ + ret = mp2975_read_word_helper(client, page, phase, + MP2975_MFR_OVP_TH_SET, + GENMASK(2, 0)); + if (ret < 0) + return ret; + + ret = data->vout_max[page] + 50 * (ret + 1); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(8, 0)); + if (ret < 0) + return ret; + ret = mp2975_vid2direct(info->vrm_version[page], ret); + break; + case PMBUS_VIRT_READ_POUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_POUT_PK); + break; + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_IOUT_PK); + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, + MP2973_MFR_OCP_TOTAL_SET, + GENMASK(15, 0)); + if (ret < 0) + return ret; + + if (ret & MP2973_MFR_OCP_LEVEL_RES) + ret = 2 * (ret & MP2973_OCP_TOTAL_CUR_MASK); + else + ret = ret & MP2973_OCP_TOTAL_CUR_MASK; + + ret = mp2975_data2reg_linear11(ret * info->phases[page] * 1000); + break; + case PMBUS_UT_WARN_LIMIT: + case PMBUS_UT_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_VOUT_OV_WARN_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_IIN_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_LV_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_UC_FAULT_LIMIT: + case PMBUS_POUT_OP_FAULT_LIMIT: + case PMBUS_POUT_OP_WARN_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + return -ENXIO; + default: + return -ENODATA; + } + + return ret; +} + static int mp2975_read_word_data(struct i2c_client *client, int page, int phase, int reg) { @@ -222,6 +380,11 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, int ret; switch (reg) { + case PMBUS_STATUS_WORD: + /* MP2973 & MP2971 return PGOOD instead of PB_STATUS_POWER_GOOD_N. */ + ret = pmbus_read_word_data(client, page, phase, reg); + ret ^= PB_STATUS_POWER_GOOD_N; + break; case PMBUS_OT_FAULT_LIMIT: ret = mp2975_read_word_helper(client, page, phase, reg, GENMASK(7, 0)); @@ -260,24 +423,6 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, ret = DIV_ROUND_CLOSEST(data->vref[page] * 10 - 50 * (ret + 1) * data->vout_scale, 10); break; - case PMBUS_READ_VOUT: - ret = mp2975_read_word_helper(client, page, phase, reg, - GENMASK(11, 0)); - if (ret < 0) - return ret; - - /* - * READ_VOUT can be provided in VID or direct format. The - * format type is specified by bit 15 of the register - * MP2975_MFR_DC_LOOP_CTRL. The driver enforces VOUT direct - * format, since device allows to set the different formats for - * the different rails and also all VOUT limits registers are - * provided in a direct format. In case format is VID - convert - * to direct. - */ - if (data->vout_format[page] == vid) - ret = mp2975_vid2direct(info->vrm_version[page], ret); - break; case PMBUS_VIRT_READ_POUT_MAX: ret = mp2975_read_word_helper(client, page, phase, MP2975_MFR_READ_POUT_PK, @@ -326,25 +471,25 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, return ret; } -static int mp2975_identify_multiphase_rail2(struct i2c_client *client) +static int mp2975_identify_multiphase_rail2(struct i2c_client *client, + struct mp2975_data *data) { int ret; /* - * Identify multiphase for rail 2 - could be from 0 to 4. + * Identify multiphase for rail 2 - could be from 0 to data->max_phases[1]. * In case phase number is zero – only page zero is supported */ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); if (ret < 0) return ret; - /* Identify multiphase for rail 2 - could be from 0 to 4. */ ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2); if (ret < 0) return ret; ret &= GENMASK(2, 0); - return (ret >= 4) ? 4 : ret; + return (ret >= data->max_phases[1]) ? data->max_phases[1] : ret; } static void mp2975_set_phase_rail1(struct pmbus_driver_info *info) @@ -375,7 +520,7 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data, if (ret < 0) return ret; - /* Identify multiphase for rail 1 - could be from 1 to 8. */ + /* Identify multiphase for rail 1 - could be from 1 to data->max_phases[0]. */ ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1); if (ret <= 0) return ret; @@ -383,21 +528,23 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data, info->phases[0] = ret & GENMASK(3, 0); /* - * The device provides a total of 8 PWM pins, and can be configured + * The device provides a total of $n PWM pins, and can be configured * to different phase count applications for rail 1 and rail 2. - * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4 - * phases at most. When rail 1’s phase count is configured as 0, rail + * Rail 1 can be set to $n phases, while rail 2 can be set to less than + * that. When rail 1’s phase count is configured as 0, rail * 1 operates with 1-phase DCM. When rail 2 phase count is configured * as 0, rail 2 is disabled. */ - if (info->phases[0] > MP2975_MAX_PHASE_RAIL1) + if (info->phases[0] > data->max_phases[0]) return -EINVAL; - mp2975_set_phase_rail1(info); - num_phases2 = min(MP2975_MAX_PHASE_RAIL1 - info->phases[0], - MP2975_MAX_PHASE_RAIL2); - if (info->phases[1] && info->phases[1] <= num_phases2) - mp2975_set_phase_rail2(info, num_phases2); + if (data->chip_id == mp2975) { + mp2975_set_phase_rail1(info); + num_phases2 = min(data->max_phases[0] - info->phases[0], + data->max_phases[1]); + if (info->phases[1] && info->phases[1] <= num_phases2) + mp2975_set_phase_rail2(info, num_phases2); + } return 0; } @@ -451,6 +598,35 @@ mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, MP2975_MFR_VR_MULTI_CONFIG_R2, 1, MP2975_IMVP9_EN_R2, MP2975_VID_STEP_SEL_R2); + + return ret; +} + +static int +mp2973_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, + struct pmbus_driver_info *info) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); + if (ret < 0) + return ret; + + /* Identify VID mode for rail 1. */ + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R1, 0, + MP2973_IMVP9_EN_R1, MP2973_VID_STEP_SEL_R1); + + if (ret < 0) + return ret; + + /* Identify VID mode for rail 2, if connected. */ + if (info->phases[1]) + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R2, 1, + MP2973_IMVP9_EN_R2, + MP2973_VID_STEP_SEL_R2); + return ret; } @@ -565,20 +741,37 @@ mp2975_vout_max_get(struct i2c_client *client, struct mp2975_data *data, } static int -mp2975_identify_vout_format(struct i2c_client *client, - struct mp2975_data *data, int page) +mp2975_set_vout_format(struct i2c_client *client, + struct mp2975_data *data, int page) { - int ret; + int ret, i; - ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); - if (ret < 0) - return ret; - - if (ret & MP2975_VOUT_FORMAT) - data->vout_format[page] = vid; - else - data->vout_format[page] = direct; - return 0; + /* Enable DIRECT VOUT format 1mV/LSB */ + if (data->chip_id == mp2975) { + ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); + if (ret < 0) + return ret; + if (ret & MP2975_VOUT_FORMAT) { + ret &= ~MP2975_VOUT_FORMAT; + ret = i2c_smbus_write_word_data(client, MP2975_MFR_DC_LOOP_CTRL, ret); + } + } else { + ret = i2c_smbus_read_word_data(client, MP2973_MFR_RESO_SET); + if (ret < 0) + return ret; + i = ret; + + if (page == 0) { + i &= ~MP2973_VOUT_FORMAT_R1; + i |= MP2973_VOUT_FORMAT_DIRECT_R1; + } else { + i &= ~MP2973_VOUT_FORMAT_R2; + i |= MP2973_VOUT_FORMAT_DIRECT_R2; + } + if (i != ret) + ret = i2c_smbus_write_word_data(client, MP2973_MFR_RESO_SET, i); + } + return ret; } static int @@ -600,7 +793,7 @@ mp2975_vout_ov_scale_get(struct i2c_client *client, struct mp2975_data *data, if (ret < 0) return ret; thres_dev = ret & MP2975_PRT_THRES_DIV_OV_EN ? MP2975_PROT_DEV_OV_ON : - MP2975_PROT_DEV_OV_OFF; + MP2975_PROT_DEV_OV_OFF; /* Select the gain of remote sense amplifier. */ ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_SCALE_LOOP); @@ -624,10 +817,10 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, for (i = 0; i < data->info.pages; i++) { ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); if (ret < 0) - return ret; + continue; - /* Obtain voltage reference offsets. */ - ret = mp2975_vref_offset_get(client, data, i); + /* Set VOUT format for READ_VOUT command : direct. */ + ret = mp2975_set_vout_format(client, data, i); if (ret < 0) return ret; @@ -636,12 +829,12 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, if (ret < 0) return ret; - /* - * Get VOUT format for READ_VOUT command : VID or direct. - * Pages on same device can be configured with different - * formats. - */ - ret = mp2975_identify_vout_format(client, data, i); + /* Skip if reading Vref is unsupported */ + if (data->chip_id != mp2975) + continue; + + /* Obtain voltage reference offsets. */ + ret = mp2975_vref_offset_get(client, data, i); if (ret < 0) return ret; @@ -676,8 +869,32 @@ static struct pmbus_driver_info mp2975_info = { PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL, - .read_byte_data = mp2975_read_byte_data, .read_word_data = mp2975_read_word_data, +#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR) + .num_regulators = 1, + .reg_desc = mp2975_reg_desc, +#endif +}; + +static struct pmbus_driver_info mp2973_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT, + .read_word_data = mp2973_read_word_data, +#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR) + .num_regulators = 1, + .reg_desc = mp2975_reg_desc, +#endif }; static int mp2975_probe(struct i2c_client *client) @@ -691,11 +908,23 @@ static int mp2975_probe(struct i2c_client *client) if (!data) return -ENOMEM; - memcpy(&data->info, &mp2975_info, sizeof(*info)); + if (client->dev.of_node) + data->chip_id = (enum chips)(unsigned long)of_device_get_match_data(&client->dev); + else + data->chip_id = i2c_match_id(mp2975_id, client)->driver_data; + + memcpy(data->max_phases, mp2975_max_phases[data->chip_id], + sizeof(data->max_phases)); + + if (data->chip_id == mp2975) + memcpy(&data->info, &mp2975_info, sizeof(*info)); + else + memcpy(&data->info, &mp2973_info, sizeof(*info)); + info = &data->info; /* Identify multiphase configuration for rail 2. */ - ret = mp2975_identify_multiphase_rail2(client); + ret = mp2975_identify_multiphase_rail2(client, data); if (ret < 0) return ret; @@ -704,6 +933,8 @@ static int mp2975_probe(struct i2c_client *client) data->info.pages = MP2975_PAGE_NUM; data->info.phases[1] = ret; data->info.func[1] = MP2975_RAIL2_FUNC; + if (IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)) + data->info.num_regulators = MP2975_PAGE_NUM; } /* Identify multiphase configuration. */ @@ -711,25 +942,32 @@ static int mp2975_probe(struct i2c_client *client) if (ret) return ret; - /* Identify VID setting per rail. */ - ret = mp2975_identify_rails_vid(client, data, info); - if (ret < 0) - return ret; + if (data->chip_id == mp2975) { + /* Identify VID setting per rail. */ + ret = mp2975_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; - /* Obtain current sense gain of power stage. */ - ret = mp2975_current_sense_gain_get(client, data); - if (ret) - return ret; + /* Obtain current sense gain of power stage. */ + ret = mp2975_current_sense_gain_get(client, data); + if (ret) + return ret; - /* Obtain voltage reference values. */ - ret = mp2975_vref_get(client, data, info); - if (ret) - return ret; + /* Obtain voltage reference values. */ + ret = mp2975_vref_get(client, data, info); + if (ret) + return ret; - /* Obtain vout over-voltage scales. */ - ret = mp2975_vout_ov_scale_get(client, data, info); - if (ret < 0) - return ret; + /* Obtain vout over-voltage scales. */ + ret = mp2975_vout_ov_scale_get(client, data, info); + if (ret < 0) + return ret; + } else { + /* Identify VID setting per rail. */ + ret = mp2973_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; + } /* Obtain offsets, maximum and format for vout. */ ret = mp2975_vout_per_rail_config_get(client, data, info); @@ -739,15 +977,10 @@ static int mp2975_probe(struct i2c_client *client) return pmbus_do_probe(client, info); } -static const struct i2c_device_id mp2975_id[] = { - {"mp2975", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, mp2975_id); - static const struct of_device_id __maybe_unused mp2975_of_match[] = { - {.compatible = "mps,mp2975"}, + {.compatible = "mps,mp2971", .data = (void *)mp2971}, + {.compatible = "mps,mp2973", .data = (void *)mp2973}, + {.compatible = "mps,mp2975", .data = (void *)mp2975}, {} }; MODULE_DEVICE_TABLE(of, mp2975_of_match); diff --git a/drivers/hwmon/pmbus/mp5023.c b/drivers/hwmon/pmbus/mp5023.c index c4c4324d2b74..21acb7fd9a1a 100644 --- a/drivers/hwmon/pmbus/mp5023.c +++ b/drivers/hwmon/pmbus/mp5023.c @@ -5,7 +5,7 @@ #include <linux/i2c.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include "pmbus.h" static struct pmbus_driver_info mp5023_info = { diff --git a/drivers/hwmon/pmbus/mpq7932.c b/drivers/hwmon/pmbus/mpq7932.c index 865d42edda1a..6c62f01da7c6 100644 --- a/drivers/hwmon/pmbus/mpq7932.c +++ b/drivers/hwmon/pmbus/mpq7932.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/pmbus.h> #include "pmbus.h" diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c index 7d8bd3167b21..c95433790b11 100644 --- a/drivers/hwmon/pmbus/pli1209bc.c +++ b/drivers/hwmon/pmbus/pli1209bc.c @@ -5,6 +5,7 @@ * Copyright (c) 2022 9elements GmbH */ +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/pmbus.h> @@ -53,6 +54,30 @@ static int pli1209bc_read_word_data(struct i2c_client *client, int page, } } +static int pli1209bc_write_byte(struct i2c_client *client, int page, u8 reg) +{ + int ret; + + switch (reg) { + case PMBUS_CLEAR_FAULTS: + ret = pmbus_write_byte(client, page, reg); + /* + * PLI1209 takes 230 usec to execute the CLEAR_FAULTS command. + * During that time it's busy and NACKs all requests on the + * SMBUS interface. It also NACKs reads on PMBUS_STATUS_BYTE + * making it impossible to poll the BUSY flag. + * + * Just wait for not BUSY unconditionally. + */ + usleep_range(250, 300); + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + #if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR) static const struct regulator_desc pli1209bc_reg_desc = { .name = "vout2", @@ -102,6 +127,7 @@ static struct pmbus_driver_info pli1209bc_info = { | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT, .read_word_data = pli1209bc_read_word_data, + .write_byte = pli1209bc_write_byte, #if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR) .num_regulators = 1, .reg_desc = &pli1209bc_reg_desc, diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 69a4e62b6c8d..1363d9f89181 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -561,7 +561,8 @@ static bool pmbus_check_register(struct i2c_client *client, rv = pmbus_check_status_cml(client); if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK)) data->read_status(client, -1); - pmbus_clear_fault_page(client, -1); + if (reg < PMBUS_VIRT_BASE) + pmbus_clear_fault_page(client, -1); return rv >= 0; } @@ -2540,7 +2541,6 @@ static int pmbus_identify_common(struct i2c_client *client, } } - pmbus_clear_fault_page(client, page); return 0; } diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c index b830f3b02bcc..a235c1cdf4fe 100644 --- a/drivers/hwmon/pmbus/q54sj108a2.c +++ b/drivers/hwmon/pmbus/q54sj108a2.c @@ -10,7 +10,7 @@ #include <linux/i2c.h> #include <linux/kstrtox.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include "pmbus.h" #define STORE_DEFAULT_ALL 0x11 diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index ef99005a3af5..5c9466244d70 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include "pmbus.h" enum chips { @@ -235,7 +235,7 @@ static int tps53679_probe(struct i2c_client *client) enum chips chip_id; if (dev->of_node) - chip_id = (enum chips)of_device_get_match_data(dev); + chip_id = (uintptr_t)of_device_get_match_data(dev); else chip_id = i2c_match_id(tps53679_id, client)->driver_data; diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index c404d306e8f7..8d9d422450e5 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -10,7 +10,7 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/init.h> #include <linux/err.h> #include <linux/slab.h> @@ -588,7 +588,7 @@ static int ucd9000_probe(struct i2c_client *client) } if (client->dev.of_node) - chip = (enum chips)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = mid->driver_data; diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c index a82847945508..7920d1c06df0 100644 --- a/drivers/hwmon/pmbus/ucd9200.c +++ b/drivers/hwmon/pmbus/ucd9200.c @@ -7,7 +7,7 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/init.h> #include <linux/err.h> #include <linux/slab.h> @@ -103,7 +103,7 @@ static int ucd9200_probe(struct i2c_client *client) } if (client->dev.of_node) - chip = (enum chips)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = mid->driver_data; diff --git a/drivers/hwmon/sbtsi_temp.c b/drivers/hwmon/sbtsi_temp.c index b79cece4ac9a..dd85cf89f008 100644 --- a/drivers/hwmon/sbtsi_temp.c +++ b/drivers/hwmon/sbtsi_temp.c @@ -13,7 +13,6 @@ #include <linux/hwmon.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_device.h> #include <linux/of.h> /* diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 121e5e9f487f..a0d220609565 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -8,7 +8,7 @@ #include <linux/hwmon.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/scpi_protocol.h> #include <linux/slab.h> diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c index bf18630619e0..79657910b79e 100644 --- a/drivers/hwmon/sht3x.c +++ b/drivers/hwmon/sht3x.c @@ -147,8 +147,20 @@ static const u16 mode_to_update_interval[] = { 100, }; +static const struct hwmon_channel_info * const sht3x_channel_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MIN | + HWMON_T_MIN_HYST | HWMON_T_MAX | + HWMON_T_MAX_HYST | HWMON_T_ALARM), + HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT | HWMON_H_MIN | + HWMON_H_MIN_HYST | HWMON_H_MAX | + HWMON_H_MAX_HYST | HWMON_H_ALARM), + NULL, +}; + struct sht3x_data { struct i2c_client *client; + enum sht3x_chips chip_id; struct mutex i2c_lock; /* lock for sending i2c commands */ struct mutex data_lock; /* lock for updating driver data */ @@ -276,27 +288,24 @@ out: return data; } -/* sysfs attributes */ -static ssize_t temp1_input_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int temp1_input_read(struct device *dev) { struct sht3x_data *data = sht3x_update_client(dev); if (IS_ERR(data)) return PTR_ERR(data); - return sprintf(buf, "%d\n", data->temperature); + return data->temperature; } -static ssize_t humidity1_input_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int humidity1_input_read(struct device *dev) { struct sht3x_data *data = sht3x_update_client(dev); if (IS_ERR(data)) return PTR_ERR(data); - return sprintf(buf, "%u\n", data->humidity); + return data->humidity; } /* @@ -332,33 +341,24 @@ static int limits_update(struct sht3x_data *data) return ret; } -static ssize_t temp1_limit_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int temp1_limit_read(struct device *dev, int index) { struct sht3x_data *data = dev_get_drvdata(dev); - u8 index = to_sensor_dev_attr(attr)->index; - int temperature_limit = data->temperature_limits[index]; - return sysfs_emit(buf, "%d\n", temperature_limit); + return data->temperature_limits[index]; } -static ssize_t humidity1_limit_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int humidity1_limit_read(struct device *dev, int index) { struct sht3x_data *data = dev_get_drvdata(dev); - u8 index = to_sensor_dev_attr(attr)->index; - u32 humidity_limit = data->humidity_limits[index]; - return sysfs_emit(buf, "%u\n", humidity_limit); + return data->humidity_limits[index]; } /* - * limit_store must only be called with data_lock held + * limit_write must only be called with data_lock held */ -static size_t limit_store(struct device *dev, - size_t count, +static size_t limit_write(struct device *dev, u8 index, int temperature, u32 humidity) @@ -379,7 +379,7 @@ static size_t limit_store(struct device *dev, * ST = (T + 45) / 175 * 2^16 * SRH = RH / 100 * 2^16 * adapted for fixed point arithmetic and packed the same as - * in limit_show() + * in limit_read() */ raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7); raw |= ((humidity * 42950) >> 16) & 0xfe00; @@ -400,50 +400,35 @@ static size_t limit_store(struct device *dev, data->temperature_limits[index] = temperature; data->humidity_limits[index] = humidity; - return count; + + return 0; } -static ssize_t temp1_limit_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) +static int temp1_limit_write(struct device *dev, int index, int val) { int temperature; int ret; struct sht3x_data *data = dev_get_drvdata(dev); - u8 index = to_sensor_dev_attr(attr)->index; - ret = kstrtoint(buf, 0, &temperature); - if (ret) - return ret; - - temperature = clamp_val(temperature, SHT3X_MIN_TEMPERATURE, + temperature = clamp_val(val, SHT3X_MIN_TEMPERATURE, SHT3X_MAX_TEMPERATURE); mutex_lock(&data->data_lock); - ret = limit_store(dev, count, index, temperature, + ret = limit_write(dev, index, temperature, data->humidity_limits[index]); mutex_unlock(&data->data_lock); return ret; } -static ssize_t humidity1_limit_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) +static int humidity1_limit_write(struct device *dev, int index, int val) { u32 humidity; int ret; struct sht3x_data *data = dev_get_drvdata(dev); - u8 index = to_sensor_dev_attr(attr)->index; - - ret = kstrtou32(buf, 0, &humidity); - if (ret) - return ret; - humidity = clamp_val(humidity, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY); + humidity = clamp_val(val, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY); mutex_lock(&data->data_lock); - ret = limit_store(dev, count, index, data->temperature_limits[index], + ret = limit_write(dev, index, data->temperature_limits[index], humidity); mutex_unlock(&data->data_lock); @@ -474,7 +459,6 @@ static void sht3x_select_command(struct sht3x_data *data) } static int status_register_read(struct device *dev, - struct device_attribute *attr, char *buffer, int length) { int ret; @@ -487,34 +471,30 @@ static int status_register_read(struct device *dev, return ret; } -static ssize_t temp1_alarm_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int temp1_alarm_read(struct device *dev) { char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; - ret = status_register_read(dev, attr, buffer, + ret = status_register_read(dev, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; - return sysfs_emit(buf, "%d\n", !!(buffer[0] & 0x04)); + return !!(buffer[0] & 0x04); } -static ssize_t humidity1_alarm_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int humidity1_alarm_read(struct device *dev) { char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; - ret = status_register_read(dev, attr, buffer, + ret = status_register_read(dev, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; - return sysfs_emit(buf, "%d\n", !!(buffer[0] & 0x08)); + return !!(buffer[0] & 0x08); } static ssize_t heater_enable_show(struct device *dev, @@ -524,7 +504,7 @@ static ssize_t heater_enable_show(struct device *dev, char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN]; int ret; - ret = status_register_read(dev, attr, buffer, + ret = status_register_read(dev, buffer, SHT3X_WORD_LEN + SHT3X_CRC8_LEN); if (ret) return ret; @@ -560,39 +540,28 @@ static ssize_t heater_enable_store(struct device *dev, return ret; } -static ssize_t update_interval_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static int update_interval_read(struct device *dev) { struct sht3x_data *data = dev_get_drvdata(dev); - return sysfs_emit(buf, "%u\n", - mode_to_update_interval[data->mode]); + return mode_to_update_interval[data->mode]; } -static ssize_t update_interval_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) +static int update_interval_write(struct device *dev, int val) { - u16 update_interval; u8 mode; int ret; const char *command; struct sht3x_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; - ret = kstrtou16(buf, 0, &update_interval); - if (ret) - return ret; - - mode = get_mode_from_update_interval(update_interval); + mode = get_mode_from_update_interval(val); mutex_lock(&data->data_lock); /* mode did not change */ if (mode == data->mode) { mutex_unlock(&data->data_lock); - return count; + return 0; } mutex_lock(&data->i2c_lock); @@ -634,7 +603,7 @@ out: if (ret != SHT3X_CMD_LENGTH) return ret < 0 ? ret : -EIO; - return count; + return 0; } static ssize_t repeatability_show(struct device *dev, @@ -668,60 +637,219 @@ static ssize_t repeatability_store(struct device *dev, return count; } -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp1_input, 0); -static SENSOR_DEVICE_ATTR_RO(humidity1_input, humidity1_input, 0); -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp1_limit, limit_max); -static SENSOR_DEVICE_ATTR_RW(humidity1_max, humidity1_limit, limit_max); -static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp1_limit, limit_max_hyst); -static SENSOR_DEVICE_ATTR_RW(humidity1_max_hyst, humidity1_limit, - limit_max_hyst); -static SENSOR_DEVICE_ATTR_RW(temp1_min, temp1_limit, limit_min); -static SENSOR_DEVICE_ATTR_RW(humidity1_min, humidity1_limit, limit_min); -static SENSOR_DEVICE_ATTR_RW(temp1_min_hyst, temp1_limit, limit_min_hyst); -static SENSOR_DEVICE_ATTR_RW(humidity1_min_hyst, humidity1_limit, - limit_min_hyst); -static SENSOR_DEVICE_ATTR_RO(temp1_alarm, temp1_alarm, 0); -static SENSOR_DEVICE_ATTR_RO(humidity1_alarm, humidity1_alarm, 0); static SENSOR_DEVICE_ATTR_RW(heater_enable, heater_enable, 0); -static SENSOR_DEVICE_ATTR_RW(update_interval, update_interval, 0); static SENSOR_DEVICE_ATTR_RW(repeatability, repeatability, 0); static struct attribute *sht3x_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_humidity1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_humidity1_max.dev_attr.attr, - &sensor_dev_attr_humidity1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, - &sensor_dev_attr_humidity1_min.dev_attr.attr, - &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_alarm.dev_attr.attr, - &sensor_dev_attr_humidity1_alarm.dev_attr.attr, &sensor_dev_attr_heater_enable.dev_attr.attr, - &sensor_dev_attr_update_interval.dev_attr.attr, &sensor_dev_attr_repeatability.dev_attr.attr, NULL }; -static struct attribute *sts3x_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_alarm.dev_attr.attr, - &sensor_dev_attr_heater_enable.dev_attr.attr, - &sensor_dev_attr_update_interval.dev_attr.attr, - &sensor_dev_attr_repeatability.dev_attr.attr, - NULL +ATTRIBUTE_GROUPS(sht3x); + +static umode_t sht3x_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct sht3x_data *chip_data = data; + + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return 0644; + default: + break; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_alarm: + return 0444; + case hwmon_temp_max: + case hwmon_temp_max_hyst: + case hwmon_temp_min: + case hwmon_temp_min_hyst: + return 0644; + default: + break; + } + break; + case hwmon_humidity: + if (chip_data->chip_id == sts3x) + break; + switch (attr) { + case hwmon_humidity_input: + case hwmon_humidity_alarm: + return 0444; + case hwmon_humidity_max: + case hwmon_humidity_max_hyst: + case hwmon_humidity_min: + case hwmon_humidity_min_hyst: + return 0644; + default: + break; + } + break; + default: + break; + } + + return 0; +} + +static int sht3x_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + enum sht3x_limits index; + + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + *val = update_interval_read(dev); + break; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + *val = temp1_input_read(dev); + break; + case hwmon_temp_alarm: + *val = temp1_alarm_read(dev); + break; + case hwmon_temp_max: + index = limit_max; + *val = temp1_limit_read(dev, index); + break; + case hwmon_temp_max_hyst: + index = limit_max_hyst; + *val = temp1_limit_read(dev, index); + break; + case hwmon_temp_min: + index = limit_min; + *val = temp1_limit_read(dev, index); + break; + case hwmon_temp_min_hyst: + index = limit_min_hyst; + *val = temp1_limit_read(dev, index); + break; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_humidity: + switch (attr) { + case hwmon_humidity_input: + *val = humidity1_input_read(dev); + break; + case hwmon_humidity_alarm: + *val = humidity1_alarm_read(dev); + break; + case hwmon_humidity_max: + index = limit_max; + *val = humidity1_limit_read(dev, index); + break; + case hwmon_humidity_max_hyst: + index = limit_max_hyst; + *val = humidity1_limit_read(dev, index); + break; + case hwmon_humidity_min: + index = limit_min; + *val = humidity1_limit_read(dev, index); + break; + case hwmon_humidity_min_hyst: + index = limit_min_hyst; + *val = humidity1_limit_read(dev, index); + break; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int sht3x_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + enum sht3x_limits index; + + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return update_interval_write(dev, val); + default: + return -EOPNOTSUPP; + } + case hwmon_temp: + switch (attr) { + case hwmon_temp_max: + index = limit_max; + break; + case hwmon_temp_max_hyst: + index = limit_max_hyst; + break; + case hwmon_temp_min: + index = limit_min; + break; + case hwmon_temp_min_hyst: + index = limit_min_hyst; + break; + default: + return -EOPNOTSUPP; + } + return temp1_limit_write(dev, index, val); + case hwmon_humidity: + switch (attr) { + case hwmon_humidity_max: + index = limit_max; + break; + case hwmon_humidity_max_hyst: + index = limit_max_hyst; + break; + case hwmon_humidity_min: + index = limit_min; + break; + case hwmon_humidity_min_hyst: + index = limit_min_hyst; + break; + default: + return -EOPNOTSUPP; + } + return humidity1_limit_write(dev, index, val); + default: + return -EOPNOTSUPP; + } +} + +static const struct hwmon_ops sht3x_ops = { + .is_visible = sht3x_is_visible, + .read = sht3x_read, + .write = sht3x_write, }; -ATTRIBUTE_GROUPS(sht3x); -ATTRIBUTE_GROUPS(sts3x); +static const struct hwmon_chip_info sht3x_chip_info = { + .ops = &sht3x_ops, + .info = sht3x_channel_info, +}; + +/* device ID table */ +static const struct i2c_device_id sht3x_ids[] = { + {"sht3x", sht3x}, + {"sts3x", sts3x}, + {} +}; -static const struct i2c_device_id sht3x_ids[]; +MODULE_DEVICE_TABLE(i2c, sht3x_ids); static int sht3x_probe(struct i2c_client *client) { @@ -730,7 +858,6 @@ static int sht3x_probe(struct i2c_client *client) struct device *hwmon_dev; struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; - const struct attribute_group **attribute_groups; /* * we require full i2c support since the sht3x uses multi-byte read and @@ -753,6 +880,7 @@ static int sht3x_probe(struct i2c_client *client) data->mode = 0; data->last_update = jiffies - msecs_to_jiffies(3000); data->client = client; + data->chip_id = i2c_match_id(sht3x_ids, client)->driver_data; crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL); sht3x_select_command(data); @@ -771,15 +899,11 @@ static int sht3x_probe(struct i2c_client *client) if (ret) return ret; - if (i2c_match_id(sht3x_ids, client)->driver_data == sts3x) - attribute_groups = sts3x_groups; - else - attribute_groups = sht3x_groups; - - hwmon_dev = devm_hwmon_device_register_with_groups(dev, - client->name, - data, - attribute_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, + client->name, + data, + &sht3x_chip_info, + sht3x_groups); if (IS_ERR(hwmon_dev)) dev_dbg(dev, "unable to register hwmon device\n"); @@ -787,15 +911,6 @@ static int sht3x_probe(struct i2c_client *client) return PTR_ERR_OR_ZERO(hwmon_dev); } -/* device ID table */ -static const struct i2c_device_id sht3x_ids[] = { - {"sht3x", sht3x}, - {"sts3x", sts3x}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, sht3x_ids); - static struct i2c_driver sht3x_i2c_driver = { .driver.name = "sht3x", .probe = sht3x_probe, diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index b0b05fd12221..0a0479501e11 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -798,7 +798,7 @@ static int sis5595_pci_probe(struct pci_dev *dev, { u16 address; u8 enable; - int *i; + int *i, err; for (i = blacklist; *i != 0; i++) { struct pci_dev *d; @@ -818,8 +818,8 @@ static int sis5595_pci_probe(struct pci_dev *dev, pci_write_config_word(dev, SIS5595_BASE_REG, force_addr); } - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, SIS5595_BASE_REG, &address)) { + err = pci_read_config_word(dev, SIS5595_BASE_REG, &address); + if (err != PCIBIOS_SUCCESSFUL) { dev_err(&dev->dev, "Failed to read ISA address\n"); return -ENODEV; } @@ -836,22 +836,23 @@ static int sis5595_pci_probe(struct pci_dev *dev, return -ENODEV; } - if (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) { + err = pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable); + if (err != PCIBIOS_SUCCESSFUL) { dev_err(&dev->dev, "Failed to read enable register\n"); return -ENODEV; } if (!(enable & 0x80)) { - if ((PCIBIOS_SUCCESSFUL != - pci_write_config_byte(dev, SIS5595_ENABLE_REG, - enable | 0x80)) - || (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) - || (!(enable & 0x80))) { - /* doesn't work for some chips! */ - dev_err(&dev->dev, "Failed to enable HWM device\n"); - return -ENODEV; - } + err = pci_write_config_byte(dev, SIS5595_ENABLE_REG, enable | 0x80); + if (err != PCIBIOS_SUCCESSFUL) + goto enable_fail; + + err = pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable); + if (err != PCIBIOS_SUCCESSFUL) + goto enable_fail; + + /* doesn't work for some chips! */ + if (!(enable & 0x80)) + goto enable_fail; } if (platform_driver_register(&sis5595_driver)) { @@ -871,6 +872,10 @@ static int sis5595_pci_probe(struct pci_dev *dev, */ return -ENODEV; +enable_fail: + dev_err(&dev->dev, "Failed to enable HWM device\n"); + goto exit; + exit_unregister: pci_dev_put(dev); platform_driver_unregister(&sis5595_driver); diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c deleted file mode 100644 index 026c76f8c22e..000000000000 --- a/drivers/hwmon/smm665.c +++ /dev/null @@ -1,706 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for SMM665 Power Controller / Monitor - * - * Copyright (C) 2010 Ericsson AB. - * - * This driver should also work for SMM465, SMM764, and SMM766, but is untested - * for those chips. Only monitoring functionality is implemented. - * - * Datasheets: - * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf - * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/delay.h> -#include <linux/jiffies.h> - -/* Internal reference voltage (VREF, x 1000 */ -#define SMM665_VREF_ADC_X1000 1250 - -/* module parameters */ -static int vref = SMM665_VREF_ADC_X1000; -module_param(vref, int, 0); -MODULE_PARM_DESC(vref, "Reference voltage in mV"); - -enum chips { smm465, smm665, smm665c, smm764, smm766 }; - -/* - * ADC channel addresses - */ -#define SMM665_MISC16_ADC_DATA_A 0x00 -#define SMM665_MISC16_ADC_DATA_B 0x01 -#define SMM665_MISC16_ADC_DATA_C 0x02 -#define SMM665_MISC16_ADC_DATA_D 0x03 -#define SMM665_MISC16_ADC_DATA_E 0x04 -#define SMM665_MISC16_ADC_DATA_F 0x05 -#define SMM665_MISC16_ADC_DATA_VDD 0x06 -#define SMM665_MISC16_ADC_DATA_12V 0x07 -#define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08 -#define SMM665_MISC16_ADC_DATA_AIN1 0x09 -#define SMM665_MISC16_ADC_DATA_AIN2 0x0a - -/* - * Command registers - */ -#define SMM665_MISC8_CMD_STS 0x80 -#define SMM665_MISC8_STATUS1 0x81 -#define SMM665_MISC8_STATUSS2 0x82 -#define SMM665_MISC8_IO_POLARITY 0x83 -#define SMM665_MISC8_PUP_POLARITY 0x84 -#define SMM665_MISC8_ADOC_STATUS1 0x85 -#define SMM665_MISC8_ADOC_STATUS2 0x86 -#define SMM665_MISC8_WRITE_PROT 0x87 -#define SMM665_MISC8_STS_TRACK 0x88 - -/* - * Configuration registers and register groups - */ -#define SMM665_ADOC_ENABLE 0x0d -#define SMM665_LIMIT_BASE 0x80 /* First limit register */ - -/* - * Limit register bit masks - */ -#define SMM665_TRIGGER_RST 0x8000 -#define SMM665_TRIGGER_HEALTHY 0x4000 -#define SMM665_TRIGGER_POWEROFF 0x2000 -#define SMM665_TRIGGER_SHUTDOWN 0x1000 -#define SMM665_ADC_MASK 0x03ff - -#define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \ - | SMM665_TRIGGER_POWEROFF \ - | SMM665_TRIGGER_SHUTDOWN)) -/* - * Fault register bit definitions - * Values are merged from status registers 1/2, - * with status register 1 providing the upper 8 bits. - */ -#define SMM665_FAULT_A 0x0001 -#define SMM665_FAULT_B 0x0002 -#define SMM665_FAULT_C 0x0004 -#define SMM665_FAULT_D 0x0008 -#define SMM665_FAULT_E 0x0010 -#define SMM665_FAULT_F 0x0020 -#define SMM665_FAULT_VDD 0x0040 -#define SMM665_FAULT_12V 0x0080 -#define SMM665_FAULT_TEMP 0x0100 -#define SMM665_FAULT_AIN1 0x0200 -#define SMM665_FAULT_AIN2 0x0400 - -/* - * I2C Register addresses - * - * The configuration register needs to be the configured base register. - * The command/status register address is derived from it. - */ -#define SMM665_REGMASK 0x78 -#define SMM665_CMDREG_BASE 0x48 -#define SMM665_CONFREG_BASE 0x50 - -/* - * Equations given by chip manufacturer to calculate voltage/temperature values - * vref = Reference voltage on VREF_ADC pin (module parameter) - * adc = 10bit ADC value read back from registers - */ - -/* Voltage A-F and VDD */ -#define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256) - -/* Voltage 12VIN */ -#define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256) - -/* Voltage AIN1, AIN2 */ -#define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512) - -/* Temp Sensor */ -#define SMM665_TEMP_ADC_TO_CELSIUS(adc) (((adc) <= 511) ? \ - ((int)(adc) * 1000 / 4) : \ - (((int)(adc) - 0x400) * 1000 / 4)) - -#define SMM665_NUM_ADC 11 - -/* - * Chip dependent ADC conversion time, in uS - */ -#define SMM665_ADC_WAIT_SMM665 70 -#define SMM665_ADC_WAIT_SMM766 185 - -struct smm665_data { - enum chips type; - int conversion_time; /* ADC conversion time */ - struct i2c_client *client; - struct mutex update_lock; - bool valid; - unsigned long last_updated; /* in jiffies */ - u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */ - u16 faults; /* fault status */ - /* The following values are in mV */ - int critical_min_limit[SMM665_NUM_ADC]; - int alarm_min_limit[SMM665_NUM_ADC]; - int critical_max_limit[SMM665_NUM_ADC]; - int alarm_max_limit[SMM665_NUM_ADC]; - struct i2c_client *cmdreg; -}; - -/* - * smm665_read16() - * - * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>. - */ -static int smm665_read16(struct i2c_client *client, int reg) -{ - int rv, val; - - rv = i2c_smbus_read_byte_data(client, reg); - if (rv < 0) - return rv; - val = rv << 8; - rv = i2c_smbus_read_byte_data(client, reg + 1); - if (rv < 0) - return rv; - val |= rv; - return val; -} - -/* - * Read adc value. - */ -static int smm665_read_adc(struct smm665_data *data, int adc) -{ - struct i2c_client *client = data->cmdreg; - int rv; - int radc; - - /* - * Algorithm for reading ADC, per SMM665 datasheet - * - * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]} - * [wait conversion time] - * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]} - * - * To implement the first part of this exchange, - * do a full read transaction and expect a failure/Nack. - * This sets up the address pointer on the SMM665 - * and starts the ADC conversion. - * Then do a two-byte read transaction. - */ - rv = i2c_smbus_read_byte_data(client, adc << 3); - if (rv != -ENXIO) { - /* - * We expect ENXIO to reflect NACK - * (per Documentation/i2c/fault-codes.rst). - * Everything else is an error. - */ - dev_dbg(&client->dev, - "Unexpected return code %d when setting ADC index", rv); - return (rv < 0) ? rv : -EIO; - } - - udelay(data->conversion_time); - - /* - * Now read two bytes. - * - * Neither i2c_smbus_read_byte() nor - * i2c_smbus_read_block_data() worked here, - * so use i2c_smbus_read_word_swapped() instead. - * We could also try to use i2c_master_recv(), - * but that is not always supported. - */ - rv = i2c_smbus_read_word_swapped(client, 0); - if (rv < 0) { - dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv); - return rv; - } - /* - * Validate/verify readback adc channel (in bit 11..14). - */ - radc = (rv >> 11) & 0x0f; - if (radc != adc) { - dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d", - adc, radc); - return -EIO; - } - - return rv & SMM665_ADC_MASK; -} - -static struct smm665_data *smm665_update_device(struct device *dev) -{ - struct smm665_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - struct smm665_data *ret = data; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - int i, val; - - /* - * read status registers - */ - val = smm665_read16(client, SMM665_MISC8_STATUS1); - if (unlikely(val < 0)) { - ret = ERR_PTR(val); - goto abort; - } - data->faults = val; - - /* Read adc registers */ - for (i = 0; i < SMM665_NUM_ADC; i++) { - val = smm665_read_adc(data, i); - if (unlikely(val < 0)) { - ret = ERR_PTR(val); - goto abort; - } - data->adc[i] = val; - } - data->last_updated = jiffies; - data->valid = true; - } -abort: - mutex_unlock(&data->update_lock); - return ret; -} - -/* Return converted value from given adc */ -static int smm665_convert(u16 adcval, int index) -{ - int val = 0; - - switch (index) { - case SMM665_MISC16_ADC_DATA_12V: - val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); - break; - - case SMM665_MISC16_ADC_DATA_VDD: - case SMM665_MISC16_ADC_DATA_A: - case SMM665_MISC16_ADC_DATA_B: - case SMM665_MISC16_ADC_DATA_C: - case SMM665_MISC16_ADC_DATA_D: - case SMM665_MISC16_ADC_DATA_E: - case SMM665_MISC16_ADC_DATA_F: - val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); - break; - - case SMM665_MISC16_ADC_DATA_AIN1: - case SMM665_MISC16_ADC_DATA_AIN2: - val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); - break; - - case SMM665_MISC16_ADC_DATA_INT_TEMP: - val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK); - break; - - default: - /* If we get here, the developer messed up */ - WARN_ON_ONCE(1); - break; - } - - return val; -} - -static int smm665_get_min(struct device *dev, int index) -{ - struct smm665_data *data = dev_get_drvdata(dev); - - return data->alarm_min_limit[index]; -} - -static int smm665_get_max(struct device *dev, int index) -{ - struct smm665_data *data = dev_get_drvdata(dev); - - return data->alarm_max_limit[index]; -} - -static int smm665_get_lcrit(struct device *dev, int index) -{ - struct smm665_data *data = dev_get_drvdata(dev); - - return data->critical_min_limit[index]; -} - -static int smm665_get_crit(struct device *dev, int index) -{ - struct smm665_data *data = dev_get_drvdata(dev); - - return data->critical_max_limit[index]; -} - -static ssize_t smm665_show_crit_alarm(struct device *dev, - struct device_attribute *da, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct smm665_data *data = smm665_update_device(dev); - int val = 0; - - if (IS_ERR(data)) - return PTR_ERR(data); - - if (data->faults & (1 << attr->index)) - val = 1; - - return sysfs_emit(buf, "%d\n", val); -} - -static ssize_t smm665_show_input(struct device *dev, - struct device_attribute *da, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct smm665_data *data = smm665_update_device(dev); - int adc = attr->index; - int val; - - if (IS_ERR(data)) - return PTR_ERR(data); - - val = smm665_convert(data->adc[adc], adc); - return sysfs_emit(buf, "%d\n", val); -} - -#define SMM665_SHOW(what) \ -static ssize_t smm665_show_##what(struct device *dev, \ - struct device_attribute *da, char *buf) \ -{ \ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ - const int val = smm665_get_##what(dev, attr->index); \ - return snprintf(buf, PAGE_SIZE, "%d\n", val); \ -} - -SMM665_SHOW(min); -SMM665_SHOW(max); -SMM665_SHOW(lcrit); -SMM665_SHOW(crit); - -/* - * These macros are used below in constructing device attribute objects - * for use with sysfs_create_group() to make a sysfs device file - * for each register. - */ - -#define SMM665_ATTR(name, type, cmd_idx) \ - static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \ - smm665_show_##type, NULL, cmd_idx) - -/* Construct a sensor_device_attribute structure for each register */ - -/* Input voltages */ -SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V); -SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD); -SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A); -SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B); -SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C); -SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D); -SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E); -SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F); -SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1); -SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2); - -/* Input voltages min */ -SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V); -SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD); -SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A); -SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B); -SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C); -SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D); -SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E); -SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F); -SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1); -SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2); - -/* Input voltages max */ -SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V); -SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD); -SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A); -SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B); -SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C); -SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D); -SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E); -SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F); -SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1); -SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2); - -/* Input voltages lcrit */ -SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V); -SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD); -SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A); -SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B); -SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C); -SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D); -SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E); -SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F); -SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1); -SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2); - -/* Input voltages crit */ -SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V); -SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD); -SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A); -SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B); -SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C); -SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D); -SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E); -SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F); -SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1); -SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2); - -/* critical alarms */ -SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V); -SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD); -SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A); -SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B); -SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C); -SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D); -SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E); -SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F); -SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1); -SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2); - -/* Temperature */ -SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP); -SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP); -SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP); -SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP); -SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP); -SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP); - -/* - * Finally, construct an array of pointers to members of the above objects, - * as required for sysfs_create_group() - */ -static struct attribute *smm665_attrs[] = { - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in1_min.dev_attr.attr, - &sensor_dev_attr_in1_max.dev_attr.attr, - &sensor_dev_attr_in1_lcrit.dev_attr.attr, - &sensor_dev_attr_in1_crit.dev_attr.attr, - &sensor_dev_attr_in1_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in2_min.dev_attr.attr, - &sensor_dev_attr_in2_max.dev_attr.attr, - &sensor_dev_attr_in2_lcrit.dev_attr.attr, - &sensor_dev_attr_in2_crit.dev_attr.attr, - &sensor_dev_attr_in2_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in3_min.dev_attr.attr, - &sensor_dev_attr_in3_max.dev_attr.attr, - &sensor_dev_attr_in3_lcrit.dev_attr.attr, - &sensor_dev_attr_in3_crit.dev_attr.attr, - &sensor_dev_attr_in3_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in4_input.dev_attr.attr, - &sensor_dev_attr_in4_min.dev_attr.attr, - &sensor_dev_attr_in4_max.dev_attr.attr, - &sensor_dev_attr_in4_lcrit.dev_attr.attr, - &sensor_dev_attr_in4_crit.dev_attr.attr, - &sensor_dev_attr_in4_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in5_min.dev_attr.attr, - &sensor_dev_attr_in5_max.dev_attr.attr, - &sensor_dev_attr_in5_lcrit.dev_attr.attr, - &sensor_dev_attr_in5_crit.dev_attr.attr, - &sensor_dev_attr_in5_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in6_min.dev_attr.attr, - &sensor_dev_attr_in6_max.dev_attr.attr, - &sensor_dev_attr_in6_lcrit.dev_attr.attr, - &sensor_dev_attr_in6_crit.dev_attr.attr, - &sensor_dev_attr_in6_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in7_min.dev_attr.attr, - &sensor_dev_attr_in7_max.dev_attr.attr, - &sensor_dev_attr_in7_lcrit.dev_attr.attr, - &sensor_dev_attr_in7_crit.dev_attr.attr, - &sensor_dev_attr_in7_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in8_input.dev_attr.attr, - &sensor_dev_attr_in8_min.dev_attr.attr, - &sensor_dev_attr_in8_max.dev_attr.attr, - &sensor_dev_attr_in8_lcrit.dev_attr.attr, - &sensor_dev_attr_in8_crit.dev_attr.attr, - &sensor_dev_attr_in8_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in9_input.dev_attr.attr, - &sensor_dev_attr_in9_min.dev_attr.attr, - &sensor_dev_attr_in9_max.dev_attr.attr, - &sensor_dev_attr_in9_lcrit.dev_attr.attr, - &sensor_dev_attr_in9_crit.dev_attr.attr, - &sensor_dev_attr_in9_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in10_min.dev_attr.attr, - &sensor_dev_attr_in10_max.dev_attr.attr, - &sensor_dev_attr_in10_lcrit.dev_attr.attr, - &sensor_dev_attr_in10_crit.dev_attr.attr, - &sensor_dev_attr_in10_crit_alarm.dev_attr.attr, - - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_lcrit.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - - NULL, -}; - -ATTRIBUTE_GROUPS(smm665); - -static const struct i2c_device_id smm665_id[]; - -static int smm665_probe(struct i2c_client *client) -{ - struct i2c_adapter *adapter = client->adapter; - struct smm665_data *data; - struct device *hwmon_dev; - int i, ret; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0) - return -ENODEV; - - data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - data->client = client; - data->type = i2c_match_id(smm665_id, client)->driver_data; - data->cmdreg = i2c_new_dummy_device(adapter, (client->addr & ~SMM665_REGMASK) - | SMM665_CMDREG_BASE); - if (IS_ERR(data->cmdreg)) - return PTR_ERR(data->cmdreg); - - switch (data->type) { - case smm465: - case smm665: - data->conversion_time = SMM665_ADC_WAIT_SMM665; - break; - case smm665c: - case smm764: - case smm766: - data->conversion_time = SMM665_ADC_WAIT_SMM766; - break; - } - - ret = -ENODEV; - if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0) - goto out_unregister; - - /* - * Read limits. - * - * Limit registers start with register SMM665_LIMIT_BASE. - * Each channel uses 8 registers, providing four limit values - * per channel. Each limit value requires two registers, with the - * high byte in the first register and the low byte in the second - * register. The first two limits are under limit values, followed - * by two over limit values. - * - * Limit register order matches the ADC register order, so we use - * ADC register defines throughout the code to index limit registers. - * - * We save the first retrieved value both as "critical" and "alarm" - * value. The second value overwrites either the critical or the - * alarm value, depending on its configuration. This ensures that both - * critical and alarm values are initialized, even if both registers are - * configured as critical or non-critical. - */ - for (i = 0; i < SMM665_NUM_ADC; i++) { - int val; - - val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8); - if (unlikely(val < 0)) - goto out_unregister; - data->critical_min_limit[i] = data->alarm_min_limit[i] - = smm665_convert(val, i); - val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2); - if (unlikely(val < 0)) - goto out_unregister; - if (smm665_is_critical(val)) - data->critical_min_limit[i] = smm665_convert(val, i); - else - data->alarm_min_limit[i] = smm665_convert(val, i); - val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4); - if (unlikely(val < 0)) - goto out_unregister; - data->critical_max_limit[i] = data->alarm_max_limit[i] - = smm665_convert(val, i); - val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6); - if (unlikely(val < 0)) - goto out_unregister; - if (smm665_is_critical(val)) - data->critical_max_limit[i] = smm665_convert(val, i); - else - data->alarm_max_limit[i] = smm665_convert(val, i); - } - - hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, - client->name, data, - smm665_groups); - if (IS_ERR(hwmon_dev)) { - ret = PTR_ERR(hwmon_dev); - goto out_unregister; - } - - return 0; - -out_unregister: - i2c_unregister_device(data->cmdreg); - return ret; -} - -static void smm665_remove(struct i2c_client *client) -{ - struct smm665_data *data = i2c_get_clientdata(client); - - i2c_unregister_device(data->cmdreg); -} - -static const struct i2c_device_id smm665_id[] = { - {"smm465", smm465}, - {"smm665", smm665}, - {"smm665c", smm665c}, - {"smm764", smm764}, - {"smm766", smm766}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, smm665_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver smm665_driver = { - .driver = { - .name = "smm665", - }, - .probe = smm665_probe, - .remove = smm665_remove, - .id_table = smm665_id, -}; - -module_i2c_driver(smm665_driver); - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("SMM665 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 3cde3916ab6d..10b66c9ce045 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -20,7 +20,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/sysfs.h> /* Addresses to scan */ diff --git a/drivers/hwmon/tmp464.c b/drivers/hwmon/tmp464.c index 4b79c3f4d9fe..f58ca4c6acb6 100644 --- a/drivers/hwmon/tmp464.c +++ b/drivers/hwmon/tmp464.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regmap.h> #include <linux/slab.h> diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c index bff10f4b56e1..9a180b1030c9 100644 --- a/drivers/hwmon/tmp513.c +++ b/drivers/hwmon/tmp513.c @@ -434,7 +434,7 @@ static umode_t tmp51x_is_visible(const void *_data, switch (type) { case hwmon_temp: - if (data->id == tmp512 && channel == 4) + if (data->id == tmp512 && channel == 3) return 0; switch (attr) { case hwmon_temp_input: @@ -720,10 +720,7 @@ static int tmp51x_probe(struct i2c_client *client) if (!data) return -ENOMEM; - if (client->dev.of_node) - data->id = (enum tmp51x_ids)device_get_match_data(&client->dev); - else - data->id = i2c_match_id(tmp51x_id, client)->driver_data; + data->id = (uintptr_t)i2c_get_match_data(client); ret = tmp51x_configure(dev, data); if (ret < 0) { diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c index 8fbbb29ae11d..d33ecbac00d6 100644 --- a/drivers/hwmon/tps23861.c +++ b/drivers/hwmon/tps23861.c @@ -14,7 +14,7 @@ #include <linux/hwmon.h> #include <linux/i2c.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regmap.h> #define TEMPERATURE 0x2c diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c index b23cff2e3d5d..3b580f229887 100644 --- a/drivers/hwmon/ultra45_env.c +++ b/drivers/hwmon/ultra45_env.c @@ -9,7 +9,8 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> #include <linux/io.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> diff --git a/drivers/hwmon/vexpress-hwmon.c b/drivers/hwmon/vexpress-hwmon.c index 2ac5fb96bba4..d82a3b454d0e 100644 --- a/drivers/hwmon/vexpress-hwmon.c +++ b/drivers/hwmon/vexpress-hwmon.c @@ -13,7 +13,6 @@ #include <linux/hwmon-sysfs.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/vexpress.h> diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 37d7374896f6..407933d6e425 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -855,16 +855,17 @@ static int via686a_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { u16 address, val; + int ret; if (force_addr) { address = force_addr & ~(VIA686A_EXTENT - 1); dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(dev, VIA686A_BASE_REG, address | 1)) + ret = pci_write_config_word(dev, VIA686A_BASE_REG, address | 1); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; } - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, VIA686A_BASE_REG, &val)) + ret = pci_read_config_word(dev, VIA686A_BASE_REG, &val); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; address = val & ~(VIA686A_EXTENT - 1); @@ -874,8 +875,8 @@ static int via686a_pci_probe(struct pci_dev *dev, return -ENODEV; } - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, VIA686A_ENABLE_REG, &val)) + ret = pci_read_config_word(dev, VIA686A_ENABLE_REG, &val); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; if (!(val & 0x0001)) { if (!force_addr) { @@ -886,9 +887,8 @@ static int via686a_pci_probe(struct pci_dev *dev, } dev_warn(&dev->dev, "Enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(dev, VIA686A_ENABLE_REG, - val | 0x0001)) + ret = pci_write_config_word(dev, VIA686A_ENABLE_REG, val | 0x1); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; } diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index b7c6392ba673..16bc16d33cd1 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -971,13 +971,15 @@ static int vt8231_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { u16 address, val; + int ret; + if (force_addr) { address = force_addr & 0xff00; dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(dev, VT8231_BASE_REG, address | 1)) + ret = pci_write_config_word(dev, VT8231_BASE_REG, address | 1); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; } @@ -997,9 +999,8 @@ static int vt8231_pci_probe(struct pci_dev *dev, if (!(val & 0x0001)) { dev_warn(&dev->dev, "enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(dev, VT8231_ENABLE_REG, - val | 0x0001)) + ret = pci_write_config_word(dev, VT8231_ENABLE_REG, val | 0x1); + if (ret != PCIBIOS_SUCCESSFUL) return -ENODEV; } diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c index 7f3615f5587c..045eea8378c2 100644 --- a/drivers/hwmon/w83773g.c +++ b/drivers/hwmon/w83773g.c @@ -12,7 +12,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/regmap.h> /* W83773 has 3 channels */ |