diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 19:28:34 -0700 |
commit | 51835949dda3783d4639cfa74ce13a3c9829de00 (patch) | |
tree | 2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /arch/riscv/net/bpf_jit.h | |
parent | 0434dbe32053d07d658165be681505120c6b1abc (diff) | |
parent | 77ae5e5b00720372af2860efdc4bc652ac682696 (diff) |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Diffstat (limited to 'arch/riscv/net/bpf_jit.h')
-rw-r--r-- | arch/riscv/net/bpf_jit.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/arch/riscv/net/bpf_jit.h b/arch/riscv/net/bpf_jit.h index fdbf88ca8b70..1d1c78d4cff1 100644 --- a/arch/riscv/net/bpf_jit.h +++ b/arch/riscv/net/bpf_jit.h @@ -18,6 +18,11 @@ static inline bool rvc_enabled(void) return IS_ENABLED(CONFIG_RISCV_ISA_C); } +static inline bool rvzba_enabled(void) +{ + return IS_ENABLED(CONFIG_RISCV_ISA_ZBA) && riscv_has_extension_likely(RISCV_ISA_EXT_ZBA); +} + static inline bool rvzbb_enabled(void) { return IS_ENABLED(CONFIG_RISCV_ISA_ZBB) && riscv_has_extension_likely(RISCV_ISA_EXT_ZBB); @@ -737,6 +742,17 @@ static inline u16 rvc_swsp(u32 imm8, u8 rs2) return rv_css_insn(0x6, imm, rs2, 0x2); } +/* RVZBA instructions. */ +static inline u32 rvzba_sh2add(u8 rd, u8 rs1, u8 rs2) +{ + return rv_r_insn(0x10, rs2, rs1, 0x4, rd, 0x33); +} + +static inline u32 rvzba_sh3add(u8 rd, u8 rs1, u8 rs2) +{ + return rv_r_insn(0x10, rs2, rs1, 0x6, rd, 0x33); +} + /* RVZBB instructions. */ static inline u32 rvzbb_sextb(u8 rd, u8 rs1) { @@ -939,6 +955,14 @@ static inline u16 rvc_sdsp(u32 imm9, u8 rs2) return rv_css_insn(0x7, imm, rs2, 0x2); } +/* RV64-only ZBA instructions. */ + +static inline u32 rvzba_zextw(u8 rd, u8 rs1) +{ + /* add.uw rd, rs1, ZERO */ + return rv_r_insn(0x04, RV_REG_ZERO, rs1, 0, rd, 0x3b); +} + #endif /* __riscv_xlen == 64 */ /* Helper functions that emit RVC instructions when possible. */ @@ -1082,6 +1106,28 @@ static inline void emit_sw(u8 rs1, s32 off, u8 rs2, struct rv_jit_context *ctx) emit(rv_sw(rs1, off, rs2), ctx); } +static inline void emit_sh2add(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx) +{ + if (rvzba_enabled()) { + emit(rvzba_sh2add(rd, rs1, rs2), ctx); + return; + } + + emit_slli(rd, rs1, 2, ctx); + emit_add(rd, rd, rs2, ctx); +} + +static inline void emit_sh3add(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx) +{ + if (rvzba_enabled()) { + emit(rvzba_sh3add(rd, rs1, rs2), ctx); + return; + } + + emit_slli(rd, rs1, 3, ctx); + emit_add(rd, rd, rs2, ctx); +} + /* RV64-only helper functions. */ #if __riscv_xlen == 64 @@ -1161,6 +1207,11 @@ static inline void emit_zexth(u8 rd, u8 rs, struct rv_jit_context *ctx) static inline void emit_zextw(u8 rd, u8 rs, struct rv_jit_context *ctx) { + if (rvzba_enabled()) { + emit(rvzba_zextw(rd, rs), ctx); + return; + } + emit_slli(rd, rs, 32, ctx); emit_srli(rd, rd, 32, ctx); } |