powerpc/pci: Delay populating pdn

The pdn (struct pci_dn) instances are allocated from memblock or
bootmem when creating PCI controller (hoses) in setup_arch(). PCI
hotplug, which will be supported by proceeding patches, releases
PCI device nodes and their corresponding pdn on unplugging event.
The memory chunks for pdn instances allocated from memblock or
bootmem are hard to reused after being released.

This delays creating pdn by pci_devs_phb_init() from setup_arch()
to core_initcall() so that they are allocated from slab. The memory
consumed by pdn can be released to system without problem during
PCI unplugging time. It indicates that pci_dn is unavailable in
setup_arch() and the the fixup on pdn (like AGP's) can't be carried
out that time. We have to do that in pcibios_root_bridge_prepare()
on maple/pasemi/powermac platforms where/when the pdn is available.
pcibios_root_bridge_prepare is called from subsys_initcall() which
is executed after core_initcall() so the code flow does not change.

At the mean while, the EEH device is created when pdn is populated,
meaning pdn and EEH device have same life cycle. In turn, we needn't
call eeh_dev_init() to create EEH device explicitly.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

5 files changed, 46 insertions, 38 deletions

diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230e575b..a2f89e6326ce 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
 	DBG(" <- maple_pci_irq_fixup\n");
 }
 
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+	struct device_node *np, *child;
+
+	if (hose != u3_agp)
+		return 0;
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions hopefully.
+	 */
+	np = hose->dn;
+	PCI_DN(np)->busno = 0xf0;
+	for_each_child_of_node(np, child)
+		PCI_DN(child)->busno = 0xf0;
+
+	return 0;
+}
+
 void __init maple_pci_init(void)
 {
 	struct device_node *np, *root;
@@ -605,19 +625,7 @@ void __init maple_pci_init(void)
 	if (ht && maple_add_bridge(ht) != 0)
 		of_node_put(ht);
 
-	/* Setup the linkage between OF nodes and PHBs */ 
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions hopefully.
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->dn;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
+	ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
 
 	/* Tell pci.c to not change any resource allocations.  */
 	pci_add_flags(PCI_PROBE_ONLY);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0fef23..10c4e8fc6ea9 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
 			of_node_get(np);
 
 	of_node_put(root);
-
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
 }
 
 void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16fa600f..6e06c3be2e9a 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
 #endif /* CONFIG_PPC32 */
 }
 
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+	struct device_node *np, *child;
+
+	if (hose != u3_agp)
+		return 0;
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions for now. We should do something better in the
+	 * future though
+	 */
+	np = hose->dn;
+	PCI_DN(np)->busno = 0xf0;
+	for_each_child_of_node(np, child)
+		PCI_DN(child)->busno = 0xf0;
+
+	return 0;
+}
+#endif /* CONFIG_PPC64 */
+
 void __init pmac_pci_init(void)
 {
 	struct device_node *np, *root;
@@ -914,20 +937,7 @@ void __init pmac_pci_init(void)
 	if (ht && pmac_add_bridge(ht) != 0)
 		of_node_put(ht);
 
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions for now. We should do something better in the
-	 * future though
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->dn;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
+	ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
 	/* pmac_check_ht_link(); */
 
 #else /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index b1ee6314f946..0f1b8bf953e1 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -816,9 +816,6 @@ void __init pnv_pci_init(void)
 	for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb")
 		pnv_pci_init_npu_phb(np);
 
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
-
 	/* Configure IOMMU DMA hooks */
 	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 34668f9bc57b..e61e9b986e21 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -195,11 +195,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
 	case OF_RECONFIG_ATTACH_NODE:
 		parent = of_get_parent(np);
 		pdn = parent ? PCI_DN(parent) : NULL;
-		if (pdn) {
-			/* Create pdn and EEH device */
+		if (pdn)
 			pci_add_device_node_info(pdn->phb, np);
-			eeh_dev_init(PCI_DN(np), pdn->phb);
-		}
 
 		of_node_put(parent);
 		break;
@@ -422,7 +419,6 @@ static void __init find_and_init_phbs(void)
 	}
 
 	of_node_put(root);
-	pci_devs_phb_init();
 
 	/*
 	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties