termbits: Convert octal defines to hex

Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.

Convert octal values to hex.

First step is an automated conversion with:

for i in $(git ls-files | grep 'termbits\.h'); do
	awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
		l=int(((length($3) - 1) * 3 + 3) / 4);
		repl = sprintf("0x%0" l "x", $3);
		print gensub(/[^[:blank:]]+/, repl, 3);
		next} {print}' $i > $i~;
	mv $i~ $i;
done

On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/2c8c96f-a12f-aadc-18ac-34c1d371929c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 111 insertions, 111 deletions

diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index dfeffba729b7..d1315ccdb39a 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -80,131 +80,131 @@ struct ktermios {
 #define VEOL		17		/* End-of-line character [ICANON].  */
 
 /* c_iflag bits */
-#define IGNBRK	0000001		/* Ignore break condition.  */
-#define BRKINT	0000002		/* Signal interrupt on break.  */
-#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
-#define PARMRK	0000010		/* Mark parity and framing errors.  */
-#define INPCK	0000020		/* Enable input parity check.  */
-#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
-#define INLCR	0000100		/* Map NL to CR on input.  */
-#define IGNCR	0000200		/* Ignore CR.  */
-#define ICRNL	0000400		/* Map CR to NL on input.  */
-#define IUCLC	0001000		/* Map upper case to lower case on input.  */
-#define IXON	0002000		/* Enable start/stop output control.  */
-#define IXANY	0004000		/* Any character will restart after stop.  */
-#define IXOFF	0010000		/* Enable start/stop input control.  */
-#define IMAXBEL 0020000		/* Ring bell when input queue is full.	*/
-#define IUTF8	0040000		/* Input is UTF-8 */
+#define IGNBRK	0x00001		/* Ignore break condition.  */
+#define BRKINT	0x00002		/* Signal interrupt on break.  */
+#define IGNPAR	0x00004		/* Ignore characters with parity errors.  */
+#define PARMRK	0x00008		/* Mark parity and framing errors.  */
+#define INPCK	0x00010		/* Enable input parity check.  */
+#define ISTRIP	0x00020		/* Strip 8th bit off characters.  */
+#define INLCR	0x00040		/* Map NL to CR on input.  */
+#define IGNCR	0x00080		/* Ignore CR.  */
+#define ICRNL	0x00100		/* Map CR to NL on input.  */
+#define IUCLC	0x00200		/* Map upper case to lower case on input.  */
+#define IXON	0x00400		/* Enable start/stop output control.  */
+#define IXANY	0x00800		/* Any character will restart after stop.  */
+#define IXOFF	0x01000		/* Enable start/stop input control.  */
+#define IMAXBEL	0x02000		/* Ring bell when input queue is full.	*/
+#define IUTF8	0x04000		/* Input is UTF-8 */
 
 /* c_oflag bits */
-#define OPOST	0000001		/* Perform output processing.  */
-#define OLCUC	0000002		/* Map lower case to upper case on output.  */
-#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define	  NL0	0000000
-#define	  NL1	0000400
-#define CRDLY	0003000
-#define	  CR0	0000000
-#define	  CR1	0001000
-#define	  CR2	0002000
-#define	  CR3	0003000
-#define TABDLY	0014000
-#define	  TAB0	0000000
-#define	  TAB1	0004000
-#define	  TAB2	0010000
-#define	  TAB3	0014000
-#define	  XTABS 0014000
-#define BSDLY	0020000
-#define	  BS0	0000000
-#define	  BS1	0020000
-#define VTDLY	0040000
-#define	  VT0	0000000
-#define	  VT1	0040000
-#define FFDLY	0100000
-#define	  FF0	0000000
-#define	  FF1	0100000
+#define OPOST	0x00001		/* Perform output processing.  */
+#define OLCUC	0x00002		/* Map lower case to upper case on output.  */
+#define ONLCR	0x00004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0x00008
+#define ONOCR	0x00010
+#define ONLRET	0x00020
+#define OFILL	0x00040
+#define OFDEL	0x00080
+#define NLDLY	0x00100
+#define	  NL0	0x00000
+#define	  NL1	0x00100
+#define CRDLY	0x00600
+#define	  CR0	0x00000
+#define	  CR1	0x00200
+#define	  CR2	0x00400
+#define	  CR3	0x00600
+#define TABDLY	0x01800
+#define	  TAB0	0x00000
+#define	  TAB1	0x00800
+#define	  TAB2	0x01000
+#define	  TAB3	0x01800
+#define	  XTABS	0x01800
+#define BSDLY	0x02000
+#define	  BS0	0x00000
+#define	  BS1	0x02000
+#define VTDLY	0x04000
+#define	  VT0	0x00000
+#define	  VT1	0x04000
+#define FFDLY	0x08000
+#define	  FF0	0x00000
+#define	  FF1	0x08000
 /*
 #define PAGEOUT ???
 #define WRAP	???
  */
 
 /* c_cflag bit meaning */
-#define CBAUD	0010017
-#define	 B0	0000000		/* hang up */
-#define	 B50	0000001
-#define	 B75	0000002
-#define	 B110	0000003
-#define	 B134	0000004
-#define	 B150	0000005
-#define	 B200	0000006
-#define	 B300	0000007
-#define	 B600	0000010
-#define	 B1200	0000011
-#define	 B1800	0000012
-#define	 B2400	0000013
-#define	 B4800	0000014
-#define	 B9600	0000015
-#define	 B19200 0000016
-#define	 B38400 0000017
+#define CBAUD		0x0000100f
+#define	 B0		0x00000000	/* hang up */
+#define	 B50		0x00000001
+#define	 B75		0x00000002
+#define	 B110		0x00000003
+#define	 B134		0x00000004
+#define	 B150		0x00000005
+#define	 B200		0x00000006
+#define	 B300		0x00000007
+#define	 B600		0x00000008
+#define	 B1200		0x00000009
+#define	 B1800		0x0000000a
+#define	 B2400		0x0000000b
+#define	 B4800		0x0000000c
+#define	 B9600		0x0000000d
+#define	 B19200		0x0000000e
+#define	 B38400		0x0000000f
 #define EXTA B19200
 #define EXTB B38400
-#define CSIZE	0000060		/* Number of bits per byte (mask).  */
-#define	  CS5	0000000		/* 5 bits per byte.  */
-#define	  CS6	0000020		/* 6 bits per byte.  */
-#define	  CS7	0000040		/* 7 bits per byte.  */
-#define	  CS8	0000060		/* 8 bits per byte.  */
-#define CSTOPB	0000100		/* Two stop bits instead of one.  */
-#define CREAD	0000200		/* Enable receiver.  */
-#define PARENB	0000400		/* Parity enable.  */
-#define PARODD	0001000		/* Odd parity instead of even.	*/
-#define HUPCL	0002000		/* Hang up on last close.  */
-#define CLOCAL	0004000		/* Ignore modem status lines.  */
-#define CBAUDEX 0010000
-#define	   BOTHER 0010000
-#define	   B57600 0010001
-#define	  B115200 0010002
-#define	  B230400 0010003
-#define	  B460800 0010004
-#define	  B500000 0010005
-#define	  B576000 0010006
-#define	  B921600 0010007
-#define	 B1000000 0010010
-#define	 B1152000 0010011
-#define	 B1500000 0010012
-#define	 B2000000 0010013
-#define	 B2500000 0010014
-#define	 B3000000 0010015
-#define	 B3500000 0010016
-#define	 B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
+#define CSIZE		0x00000030	/* Number of bits per byte (mask) */
+#define	  CS5		0x00000000	/* 5 bits per byte */
+#define	  CS6		0x00000010	/* 6 bits per byte */
+#define	  CS7		0x00000020	/* 7 bits per byte */
+#define	  CS8		0x00000030	/* 8 bits per byte */
+#define CSTOPB		0x00000040	/* Two stop bits instead of one */
+#define CREAD		0x00000080	/* Enable receiver */
+#define PARENB		0x00000100	/* Parity enable */
+#define PARODD		0x00000200	/* Odd parity instead of even */
+#define HUPCL		0x00000400	/* Hang up on last close */
+#define CLOCAL		0x00000800	/* Ignore modem status lines */
+#define CBAUDEX		0x00001000
+#define	   BOTHER	0x00001000
+#define	   B57600	0x00001001
+#define	  B115200	0x00001002
+#define	  B230400	0x00001003
+#define	  B460800	0x00001004
+#define	  B500000	0x00001005
+#define	  B576000	0x00001006
+#define	  B921600	0x00001007
+#define	 B1000000	0x00001008
+#define	 B1152000	0x00001009
+#define	 B1500000	0x0000100a
+#define	 B2000000	0x0000100b
+#define	 B2500000	0x0000100c
+#define	 B3000000	0x0000100d
+#define	 B3500000	0x0000100e
+#define	 B4000000	0x0000100f
+#define CIBAUD		0x100f0000	/* input baud rate */
+#define CMSPAR		0x40000000	/* mark or space (stick) parity */
+#define CRTSCTS		0x80000000	/* flow control */
 
 #define IBSHIFT 16		/* Shift from CBAUD to CIBAUD */
 
 /* c_lflag bits */
-#define ISIG	0000001		/* Enable signals.  */
-#define ICANON	0000002		/* Do erase and kill processing.  */
-#define XCASE	0000004
-#define ECHO	0000010		/* Enable echo.	 */
-#define ECHOE	0000020		/* Visual erase for ERASE.  */
-#define ECHOK	0000040		/* Echo NL after KILL.	*/
-#define ECHONL	0000100		/* Echo NL even if ECHO is off.	 */
-#define NOFLSH	0000200		/* Disable flush after interrupt.  */
-#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
-#define ECHOCTL 0001000		/* Echo control characters as ^X.  */
-#define ECHOPRT 0002000		/* Hardcopy visual erase.  */
-#define ECHOKE	0004000		/* Visual erase for KILL.  */
-#define FLUSHO	0020000
-#define PENDIN	0040000		/* Retype pending input (state).  */
-#define TOSTOP	0100000		/* Send SIGTTOU for background output.	*/
-#define ITOSTOP TOSTOP
-#define EXTPROC 0200000		/* External processing on pty */
+#define ISIG	0x00001		/* Enable signals.  */
+#define ICANON	0x00002		/* Do erase and kill processing.  */
+#define XCASE	0x00004
+#define ECHO	0x00008		/* Enable echo.	 */
+#define ECHOE	0x00010		/* Visual erase for ERASE.  */
+#define ECHOK	0x00020		/* Echo NL after KILL.	*/
+#define ECHONL	0x00040		/* Echo NL even if ECHO is off.	 */
+#define NOFLSH	0x00080		/* Disable flush after interrupt.  */
+#define IEXTEN	0x00100		/* Enable DISCARD and LNEXT.  */
+#define ECHOCTL	0x00200		/* Echo control characters as ^X.  */
+#define ECHOPRT	0x00400		/* Hardcopy visual erase.  */
+#define ECHOKE	0x00800		/* Visual erase for KILL.  */
+#define FLUSHO	0x02000
+#define PENDIN	0x04000		/* Retype pending input (state).  */
+#define TOSTOP	0x08000		/* Send SIGTTOU for background output.	*/
+#define ITOSTOP	TOSTOP
+#define EXTPROC	0x10000		/* External processing on pty */
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 #define TIOCSER_TEMT	0x01	/* Transmitter physically empty */