diff options
author | Arnd Bergmann <arnd@arndb.de> | 2024-07-08 16:34:32 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2024-07-08 16:34:33 +0200 |
commit | b4f8192afb401a0bb3c784dd94a0ea086939dd74 (patch) | |
tree | 28b6456d84fcc7f4eceb0e2305981a5526b8268f /arch/arm64/boot/dts/xilinx | |
parent | 03b4edd51f290fbb414a8baa9cdae3ae8fc403fd (diff) | |
parent | 6406c5d5512c0814b8c155df7f833a98d9069a72 (diff) |
Merge tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.11
Generic Fixups/Cleanups:
- main_pktdma reg ranges fixes
- dtbs_check warning cleanups with addition of cpsw-mac-efuse node and
dropping "syscon", "simple-mfd" compatibles in favor of simple-bus
- Disable McASP FIFOs across SoCs for better latency
- Add memory node to bootloader stage with bootph-all
- Restructure am62p and j722s dtsi for share nodes across these SoCs
- DT warning fixes around USB type-C connector node (AM62/AM62P)
SoC Specific features and Fixes:
AM62
- GPMC and ELM addition
AM62A
- Enable RTC by default
- Crypto accelerator support
AM64 and AM65
- PRU system event support
AM69/J784S4:
- CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support
- PCIe, USB, McASP, EHRPWM node additions
AM67/J722s
- Fix to update GPIO count
- Add gpio-ranges definition
- McASP support for audio
- PCIe, USB, Serdes support
Board Specific features and fixes:
AM62
- am62x-phyboard-lyra carrier board support
- am625-verdin: nau8822 PLL support
- sk: CMA node addition
- lp-sk: NAND expansion card overlay
AM62A
- New phyboard-lyra-am62ax from phytec
- CMA node addition
AM64:
- phycore-board: PMIC support
- hummingbird-t: RS485 RTS pin polarity update
- am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/
QSPI
- EVM: GPMC NAND expansion card overlay
- EVM: ICSSG ethernet MII mode overlay support
- SK: power supply temp sensors support
AM68
- SK: PMIC, OSPI
J721e
- SK: MCAN Support
- Overlay for infotainment expansion board
AM69/J784S4
- EVM: PCIe RC/EP, USB3, MCAN support
- SK: PMIC support
* tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (89 commits)
arm64: dts: ti: k3-am62a7-sk: Reserve 576MiB of global CMA
arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA
arm64: dts: ti: k3-am62x-sk-common: Fix graph_child_address warns
arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings
arm64: dts: ti: k3-j722s: Add gpio-ranges properties
arm64: dts: ti: k3-am62p: Add gpio-ranges properties
arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
arm64: dts: ti: k3-am62: Add cpsw-mac-efuse node to wkup_conf
arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf
arm64: dts: ti: k3-j784s4: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j721s2: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j721e: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j7200: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-am65: Add cpsw-mac-efuse node to mcu_conf
arm: dts: k3-am642-evm-nand: Add bootph-all to NAND related nodes
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax
dt-bindings: arm: ti: Add bindings for PHYTEC AM62Ax based hardware
arm64: dts: ti: Add am62x-phyboard-lyra carrier board
arm64: dts: ti: k3-am62a: Enable AUDIO_REFCLKx
arm64: dts: ti: k3-j784s4-evm: Enable analog audio support
...
Link: https://lore.kernel.org/r/37f251a1-f3bd-402f-ab22-cf786c3871d7@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot/dts/xilinx')
0 files changed, 0 insertions, 0 deletions