ARM: entry: Make asm coproc dispatch code NWFPE only

Now that we can dispatch all VFP and iWMMXT related undef exceptions
using undef hooks implemented in C code, we no longer need the asm entry
code that takes care of this unless we are using FPE, so we can move it
into the FPE entry code. As this means it is ARM only, we can remove the
Thumb2 specific decorations as well.

It also means the non-standard, asm-only calling convention where
returning via LR means failure and returning via R9 means success is now
only used on legacy platforms that lack any kind of function return
prediction, avoiding the associated performance impact.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

1 files changed, 77 insertions, 0 deletions

diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index d8f9915566e1..354d297a193b 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -7,6 +7,7 @@
     Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
 
 */
+#include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/opcodes.h>
 
@@ -104,6 +105,7 @@ next:
 	@ plain LDR instruction.  Weird, but it seems harmless.
 	.pushsection .text.fixup,"ax"
 	.align	2
+.Lrep:	str     r4, [sp, #S_PC]		@ retry current instruction
 .Lfix:	ret	r9			@ let the user eat segfaults
 	.popsection
 
@@ -111,3 +113,78 @@ next:
 	.align	3
 	.long	.Lx1, .Lfix
 	.popsection
+
+	@
+	@ Check whether the instruction is a co-processor instruction.
+	@ If yes, we need to call the relevant co-processor handler.
+	@ Only FPE instructions are dispatched here, everything else
+	@ is handled by undef hooks.
+	@
+	@ Emulators may wish to make use of the following registers:
+	@  r4  = PC value to resume execution after successful emulation
+	@  r9  = normal "successful" return address
+	@  lr  = unrecognised instruction return address
+	@ IRQs enabled, FIQs enabled.
+	@
+ENTRY(call_fpe)
+	mov	r2, r4
+	sub	r4, r4, #4			@ ARM instruction at user PC - 4
+USERL(	.Lrep,	ldrt r0, [r4])			@ load opcode from user space
+ARM_BE8(rev	r0, r0)				@ little endian instruction
+
+	uaccess_disable ip
+
+	get_thread_info r10			@ get current thread
+	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
+	reteq	lr
+	and	r8, r0, #0x00000f00		@ mask out CP number
+#ifdef CONFIG_IWMMXT
+	@ Test if we need to give access to iWMMXt coprocessors
+	ldr	r5, [r10, #TI_FLAGS]
+	rsbs	r7, r8, #(1 << 8)		@ CP 0 or 1 only
+	movscs	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
+	movcs	r0, sp				@ pass struct pt_regs
+	bcs	iwmmxt_task_enable
+#endif
+	add	pc, pc, r8, lsr #6
+	nop
+
+	ret	lr				@ CP#0
+	b	do_fpe				@ CP#1 (FPE)
+	b	do_fpe				@ CP#2 (FPE)
+	ret	lr				@ CP#3
+	ret	lr				@ CP#4
+	ret	lr				@ CP#5
+	ret	lr				@ CP#6
+	ret	lr				@ CP#7
+	ret	lr				@ CP#8
+	ret	lr				@ CP#9
+	ret	lr				@ CP#10 (VFP)
+	ret	lr				@ CP#11 (VFP)
+	ret	lr				@ CP#12
+	ret	lr				@ CP#13
+	ret	lr				@ CP#14 (Debug)
+	ret	lr				@ CP#15 (Control)
+
+do_fpe:
+	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
+	ldr_va	pc, fp_enter, tmp=r4		@ Call FP module USR entry point
+
+	@
+	@ The FP module is called with these registers set:
+	@  r0  = instruction
+	@  r2  = PC+4
+	@  r9  = normal "successful" return address
+	@  r10 = FP workspace
+	@  lr  = unrecognised FP instruction return address
+	@
+
+	.pushsection .data
+	.align	2
+ENTRY(fp_enter)
+	.word	no_fp
+	.popsection
+
+no_fp:
+	ret	lr
+ENDPROC(no_fp)