diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-12-31 17:27:54 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-12-31 17:27:54 -0800 |
commit | 0922275ef157ba8ac93e7e7857087eb0442d5397 (patch) | |
tree | c7d5391df54d09f1ae652a73438d60293b3bebf4 /arch/arm/mach-davinci/board-dm365-evm.c | |
parent | 495d714ad140e1732e66c45d0409054b24c1a0d6 (diff) | |
parent | cac1fc8fb561ac766468394d49c3dd11a2b8cb44 (diff) |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
Diffstat (limited to 'arch/arm/mach-davinci/board-dm365-evm.c')
-rw-r--r-- | arch/arm/mach-davinci/board-dm365-evm.c | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 09e439d4abf5..e3b0b701e395 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -24,6 +24,7 @@ #include <linux/mtd/partitions.h> #include <linux/slab.h> #include <linux/mtd/rawnand.h> +#include <linux/nvmem-provider.h> #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> @@ -203,6 +204,27 @@ static struct platform_device davinci_aemif_device = { .num_resources = ARRAY_SIZE(davinci_aemif_resources), }; +static struct nvmem_cell_info davinci_nvmem_cells[] = { + { + .name = "macaddr", + .offset = 0x7f00, + .bytes = ETH_ALEN, + } +}; + +static struct nvmem_cell_table davinci_nvmem_cell_table = { + .nvmem_name = "1-00500", + .cells = davinci_nvmem_cells, + .ncells = ARRAY_SIZE(davinci_nvmem_cells), +}; + +static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = { + .nvmem_name = "1-00500", + .cell_name = "macaddr", + .dev_id = "davinci_emac.1", + .con_id = "mac-address", +}; + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, @@ -781,6 +803,9 @@ static __init void dm365_evm_init(void) if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + nvmem_add_cell_table(&davinci_nvmem_cell_table); + nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1); + evm_init_i2c(); davinci_serial_init(dm365_serial_device); |