Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Export pcie_retrain_link() for use outside ASPM

   - Add Data Link Layer Link Active Reporting as another way for
     pcie_retrain_link() to determine the link is up

   - Work around link training failures (especially on the ASMedia
     ASM2824 switch) by training first at 2.5GT/s and then attempting
     higher rates

  Resource management:

   - When we coalesce host bridge windows, remove invalidated resources
     from the resource tree so future allocations work correctly

  Hotplug:

   - Cancel bringup sequence if card is not present, to keep from
     blinking Power Indicator indefinitely

   - Reassign bridge resources if necessary for ACPI hotplug

  Driver binding:

   - Convert platform_device .remove() callbacks to return void instead
     of a mostly useless int

  Power management:

   - Reduce wait time for secondary bus to be ready to speed up resume

   - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
     D3cold

   - Call _REG when transitioning D-states so AML that uses the PCI
     config space OpRegion works, which fixes some ASMedia GPIO
     controllers after resume

  Virtualization:

   - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
     hang when guest is rebooted

   - Add function 1 DMA alias quirk for Marvell 88SE9235

  Error handling:

   - Unexport pci_save_aer_state() since it's only used in drivers/pci/

   - Drop recommendation for drivers to configure AER Capability, since
     the PCI core does this for all devices

  ASPM:

   - Disable ASPM on MFD function removal to avoid use-after-free

   - Tighten up pci_enable_link_state() and pci_disable_link_state()
     interfaces so they don't enable/disable states the driver didn't
     specify

   - Avoid link retraining race that can happen if ASPM sets link
     control parameters while the link is in the midst of training for
     some other reason

  Endpoint framework:

   - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
     different from "PCI Endpoint NTB driver"

   - Automatically create a function specific attributes group for
     endpoint drivers to avoid reference counting issues

   - Fix many EPC test issues

   - Return pci_epf_type_add_cfs() error if EPF has no driver

   - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
     MSI vector parameters

   - Pass EPF device ID to driver probe functions

   - Return -EALREADY if EPC has already been started/stopped

   - Add linkdown notifier support and use it in qcom-ep

   - Add Bus Master Enable event support and use it in qcom-ep

   - Add Qualcomm Modem Host Interface (MHI) endpoint driver

   - Add Layerscape PME interrupt handling to manage link-up
     notification

  Cadence PCIe controller driver:

   - Wait for link retrain to complete when working around the J721E
     i2085 erratum with Gen2 mode

  Faraday FTPC100 PCI controller driver:

   - Release clock resources on error paths

  Freescale i.MX6 PCIe controller driver:

   - Save and restore Root Port MSI control to work around hardware defect

  Intel VMD host bridge driver:

   - Reset VMD config register between soft reboots

   - Capture pci_reset_bus() return value instead of printing junk when
     it fails

  Qualcomm PCIe controller driver:

   - Add SDX65 endpoint compatible string to DT binding

   - Disable register write access after init for IP v2.3.3, v2.9.0

   - Use DWC helpers for enabling/disabling writes to DBI registers

   - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
     v2.3.3, v2.7.0, v2.9.0

   - Reuse v2.3.2 post-init sequence for v2.4.0

  Renesas R-Car PCIe controller driver:

   - Remove unused static pcie_base and pcie_dev

  Rockchip PCIe controller driver:

   - Remove writes to unused registers

   - Write endpoint Device ID using correct register

   - Assert PCI Configuration Enable bit after probe so endpoint
     responds instead of generating Request Retry Status messages

   - Poll waiting for PHY PLLs to lock

   - Update RK3399 example DT binding to be valid

   - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
     manually generating PCIe message

   - Use multiple windows to avoid address translation conflicts

   - Use u32 (not u16) when accessing 32-bit registers

   - Hide MSI-X Capability, since RK3399 can't generate MSI-X

   - Set endpoint controller required alignment to 256

  Synopsys DesignWare PCIe controller driver:

   - Wait for link to come up only if we've initiated link training

  Miscellaneous:

   - Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  Documentation: PCI: correct spelling
  PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
  PCI: xgene-msi: Convert to platform remove callback returning void
  PCI: tegra: Convert to platform remove callback returning void
  PCI: rockchip-host: Convert to platform remove callback returning void
  PCI: mvebu: Convert to platform remove callback returning void
  PCI: mt7621: Convert to platform remove callback returning void
  PCI: mediatek-gen3: Convert to platform remove callback returning void
  PCI: mediatek: Convert to platform remove callback returning void
  PCI: iproc: Convert to platform remove callback returning void
  PCI: hisi-error: Convert to platform remove callback returning void
  PCI: dwc: Convert to platform remove callback returning void
  PCI: j721e: Convert to platform remove callback returning void
  PCI: brcmstb: Convert to platform remove callback returning void
  PCI: altera-msi: Convert to platform remove callback returning void
  PCI: altera: Convert to platform remove callback returning void
  PCI: aardvark: Convert to platform remove callback returning void
  PCI: rcar: Use correct product family name for Renesas R-Car
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  ...

1 files changed, 1 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index f94fb9e8a5b7..d2326e843748 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13744,6 +13744,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
 F:	Documentation/ABI/stable/sysfs-bus-mhi
 F:	Documentation/mhi/
 F:	drivers/bus/mhi/
+F:	drivers/pci/endpoint/functions/pci-epf-mhi.c
 F:	include/linux/mhi.h
 
 MICROBLAZE ARCHITECTURE