Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
  hpsa, zfcp, scsi_debug) and minor bug fixes.

  We also have a huge docbook fix update like most other subsystems and
  no major update to the core (the few non trivial updates are either
  minor fixes or removing an unused feature [scsi_sdb_cache])"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
  scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
  scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
  scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
  scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
  scsi: scsi_debug: Implement tur_ms_to_ready parameter
  scsi: scsi_debug: Fix request sense
  scsi: lpfc: Fix typo in comment for ULP
  scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
  scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
  scsi: hpsa: Correct ctrl queue depth
  scsi: target: tcmu: Make TMR notification optional
  scsi: target: tcmu: Implement tmr_notify callback
  scsi: target: tcmu: Fix and simplify timeout handling
  scsi: target: tcmu: Factor out new helper ring_insert_padding
  scsi: target: tcmu: Do not queue aborted commands
  scsi: target: tcmu: Use priv pointer in se_cmd
  scsi: target: Add tmr_notify backend function
  scsi: target: Modify core_tmr_abort_task()
  scsi: target: iscsi: Fix inconsistent debug message
  scsi: target: iscsi: Fix login error when receiving
  ...

3 files changed, 138 insertions, 2 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 016724ec26d5..d1a352194d2e 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -883,3 +883,139 @@ Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen system power management level.
 		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows if preserve user-space was configured
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the shared allocated units of WB buffer
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the configured WB type.
+		0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the total user-space decrease in shared
+		buffer mode.
+		The value of this parameter is 3 for TLC NAND when SLC mode
+		is used as WriteBooster Buffer. 2 for MLC NAND.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the Maximum total WriteBooster Buffer size
+		which is supported by the entire device.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the maximum number of luns that can support
+		WriteBooster.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	The supportability of user space reduction mode
+		and preserve user space mode.
+		00h: WriteBooster Buffer can be configured only in
+		user space reduction type.
+		01h: WriteBooster Buffer can be configured only in
+		preserve user space type.
+		02h: Device can be configured in either user space
+		reduction type or preserve user space type.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	The supportability of WriteBooster Buffer type.
+		00h: LU based WriteBooster Buffer configuration
+		01h: Single shared WriteBooster Buffer
+		configuration
+		02h: Supporting both LU based WriteBooster
+		Buffer and Single shared WriteBooster Buffer
+		configuration
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the status of WriteBooster.
+		0: WriteBooster is not enabled.
+		1: WriteBooster is enabled
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows if flush is enabled.
+		0: Flush operation is not performed.
+		1: Flush operation is performed.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	Flush WriteBooster Buffer during hibernate state.
+		0: Device is not allowed to flush the
+		WriteBooster Buffer during link hibernate
+		state.
+		1: Device is allowed to flush the
+		WriteBooster Buffer during link hibernate
+		state
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the amount of unused WriteBooster buffer
+		available.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the amount of unused current buffer.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the flush operation status.
+		00h: idle
+		01h: Flush operation in progress
+		02h: Flush operation stopped prematurely.
+		03h: Flush operation completed successfully
+		04h: Flush operation general failure
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows an indication of the WriteBooster Buffer
+		lifetime based on the amount of performed program/erase cycles
+		01h: 0% - 10% WriteBooster Buffer life time used
+		...
+		0Ah: 90% - 100% WriteBooster Buffer life time used
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
+Date:		June 2020
+Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Description:	This entry shows the configured size of WriteBooster buffer.
+		0400h corresponds to 4GB.
+		The file is read only.
diff --git a/Documentation/scsi/advansys.rst b/Documentation/scsi/advansys.rst
index e0367e179696..7ea12b100ff4 100644
--- a/Documentation/scsi/advansys.rst
+++ b/Documentation/scsi/advansys.rst
@@ -125,7 +125,7 @@ The following constants can be defined in the source file.
    c. klogd is started with the appropriate -c parameter
       (e.g. klogd -c 8)
 
-   This will cause printk() messages to be be displayed on the
+   This will cause printk() messages to be displayed on the
    current console. Refer to the klogd(8) and syslogd(8) man pages
    for details.
 
diff --git a/Documentation/scsi/scsi-parameters.rst b/Documentation/scsi/scsi-parameters.rst
index 9aba897c97ac..e5f68b431f5c 100644
--- a/Documentation/scsi/scsi-parameters.rst
+++ b/Documentation/scsi/scsi-parameters.rst
@@ -94,7 +94,7 @@ parameters may be changed at runtime by the command
 			(/proc/sys/dev/scsi/logging_level).
 			There is also a nice 'scsi_logging_level' script in the
 			S390-tools package, available for download at
-			http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+			https://github.com/ibm-s390-tools/s390-tools/blob/master/scripts/scsi_logging_level
 
 	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
 			discovered.  async scans them in kernel threads,