Merge x86 bugfixes from Linux 6.9-rc3

Pull fix for SEV-SNP late disable bugs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

29 files changed, 128 insertions, 43 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index bb884c14b2f6..623fce7d5fcd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -6599,7 +6599,7 @@
 			To turn off having tracepoints sent to printk,
 			 echo 0 > /proc/sys/kernel/tracepoint_printk
 			Note, echoing 1 into this file without the
-			tracepoint_printk kernel cmdline option has no effect.
+			tp_printk kernel cmdline option has no effect.
 
 			The tp_printk_stop_on_boot (see below) can also be used
 			to stop the printing of events to console at
diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst
index b42132969e31..13632671adae 100644
--- a/Documentation/admin-guide/mm/zswap.rst
+++ b/Documentation/admin-guide/mm/zswap.rst
@@ -155,7 +155,7 @@ Setting this parameter to 100 will disable the hysteresis.
 
 Some users cannot tolerate the swapping that comes with zswap store failures
 and zswap writebacks. Swapping can be disabled entirely (without disabling
-zswap itself) on a cgroup-basis as follows:
+zswap itself) on a cgroup-basis as follows::
 
 	echo 0 > /sys/fs/cgroup/<cgroup-name>/memory.zswap.writeback
 
@@ -166,7 +166,7 @@ writeback (because the same pages might be rejected again and again).
 When there is a sizable amount of cold memory residing in the zswap pool, it
 can be advantageous to proactively write these cold pages to swap and reclaim
 the memory for other use cases. By default, the zswap shrinker is disabled.
-User can enable it as follows:
+User can enable it as follows::
 
   echo Y > /sys/module/zswap/parameters/shrinker_enabled
 
diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index 3712d81cb50c..6c245582d8fb 100644
--- a/Documentation/arch/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -574,7 +574,7 @@ Memory b/w domain is L3 cache.
 	MB:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
 
 Memory bandwidth Allocation specified in MiBps
----------------------------------------------
+----------------------------------------------
 
 Memory bandwidth domain is L3 cache.
 ::
diff --git a/Documentation/dev-tools/testing-overview.rst b/Documentation/dev-tools/testing-overview.rst
index 0aaf6ea53608..1619e5e5cc9c 100644
--- a/Documentation/dev-tools/testing-overview.rst
+++ b/Documentation/dev-tools/testing-overview.rst
@@ -104,6 +104,8 @@ Some of these tools are listed below:
   KASAN and can be used in production. See Documentation/dev-tools/kfence.rst
 * lockdep is a locking correctness validator. See
   Documentation/locking/lockdep-design.rst
+* Runtime Verification (RV) supports checking specific behaviours for a given
+  subsystem. See Documentation/trace/rv/runtime-verification.rst
 * There are several other pieces of debug instrumentation in the kernel, many
   of which can be found in lib/Kconfig.debug
 
diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt
index c5aa187026e3..43f6fb6c9392 100644
--- a/Documentation/devicetree/bindings/clock/keystone-gate.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for Keystone gate control driver which uses PSC controller IP.
 
 This binding uses the common clock binding[1].
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
index 9a3fbc665606..69b0eb7c03c9 100644
--- a/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
 and PAPLL are controlled by the memory mapped register where as the Main
diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt
index 4c8a2ce2cd70..3122360adcf3 100644
--- a/Documentation/devicetree/bindings/clock/ti/adpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments ADPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped ADPLL with two to three selectable input clocks
 and three to four children.
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
index ade4dd4c30f0..bbd505c1199d 100644
--- a/Documentation/devicetree/bindings/clock/ti/apll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments APLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped APLL with usually two selectable input clocks
 (reference clock and bypass clock), with analog phase locked
diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
index 7c735dde9fe9..05645a10a9e3 100644
--- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments autoidle clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a register mapped
 clock which can be put to idle automatically by hardware based on the usage
 and a configuration bit setting. Autoidle clock is never an individual
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index 9c6199249ce5..edf0b5d42768 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments clockdomain.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1] in consumer role.
 Every clock on TI SoC belongs to one clockdomain, but software
 only needs this information for specific clocks which require
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
index 33ac7c9ad053..6f7e1331b546 100644
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -1,7 +1,5 @@
 Binding for TI composite clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped composite clock with multiple different sub-types;
 
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
index 9b13b32974f9..4d7c76f0b356 100644
--- a/Documentation/devicetree/bindings/clock/ti/divider.txt
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -1,7 +1,5 @@
 Binding for TI divider clock
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped adjustable clock rate divider that does not gate and has
 only one input clock or parent.  By default the value programmed into
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index 37a7cb6ad07d..14a1b72c2e71 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments DPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped DPLL with usually two selectable input clocks
 (reference clock and bypass clock), with digital phase locked
diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt
index c19b3f253b8c..88986ef39ddd 100644
--- a/Documentation/devicetree/bindings/clock/ti/fapll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments FAPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped FAPLL with usually two selectable input clocks
 (reference clock and bypass clock), and one or more child
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 518e3c142276..dc69477b6e98 100644
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -1,7 +1,5 @@
 Binding for TI fixed factor rate clock sources.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1], and also uses the autoidle
 support from TI autoidle clock [2].
 
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 4982615c01b9..a8e0335b006a 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments gate clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features. If no register
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index d3eb5ca92a7f..85fb1f2d2d28 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments interface clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features, including
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index b33f641f1043..cd56d3c1c09f 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -1,7 +1,5 @@
 Binding for TI mux clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped multiplexer with multiple input clock signals or
 parents, one of which can be selected as output.  This clock does not
diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst
index a9bdd2b59dca..8a68331075a0 100644
--- a/Documentation/devicetree/bindings/dts-coding-style.rst
+++ b/Documentation/devicetree/bindings/dts-coding-style.rst
@@ -144,6 +144,8 @@ Example::
 		#dma-cells = <1>;
 		clocks = <&clock_controller 0>, <&clock_controller 1>;
 		clock-names = "bus", "host";
+		#address-cells = <1>;
+		#size-cells = <1>;
 		vendor,custom-property = <2>;
 		status = "disabled";
 
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 528ef3572b62..055a3351880b 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -94,6 +94,10 @@ properties:
 
   local-bd-address: true
 
+  qcom,local-bd-address-broken:
+    type: boolean
+    description:
+      boot firmware is incorrectly passing the address in big-endian order
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
index 25f8658e216f..48a49c516b62 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
@@ -1,9 +1,6 @@
 TI Davinci DSP devices
 =======================
 
-Binding status: Unstable - Subject to changes for DT representation of clocks
-			   and resets
-
 The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
 is used to offload some of the processor-intensive tasks or algorithms, for
 achieving various system level goals.
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index 397f75909b20..ce1a6505eb51 100644
--- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -51,7 +51,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^clock-controller@[0-9a-z]+$":
+  "^clock-controller@[0-9a-f]+$":
     $ref: /schemas/clock/fsl,flexspi-clock.yaml#
 
 required:
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
index 8d088b5fe823..a6a511b00a12 100644
--- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -41,7 +41,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^interrupt-controller@[a-z0-9]+$":
+  "^interrupt-controller@[a-f0-9]+$":
     $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
 
 required:
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 7a4a6ab85970..ab8f28993139 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -60,7 +60,7 @@ properties:
       be implemented in an always-on power domain."
 
 patternProperties:
-  '^frame@[0-9a-z]*$':
+  '^frame@[0-9a-f]+$':
     type: object
     additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 10c146424baa..cd3680dc002f 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -27,10 +27,13 @@ properties:
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7180-ufshc
           - qcom,sc7280-ufshc
+          - qcom,sc8180x-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
+          - qcom,sm6125-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -42,11 +45,11 @@ properties:
       - const: jedec,ufs-2.0
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   dma-coherent: true
@@ -117,9 +120,35 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc7180-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
               - qcom,sc7280-ufshc
+              - qcom,sc8180x-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
@@ -215,6 +244,7 @@ allOf:
           contains:
             enum:
               - qcom,sm6115-ufshc
+              - qcom,sm6125-ufshc
     then:
       properties:
         clocks:
@@ -248,7 +278,7 @@ allOf:
         reg:
           maxItems: 1
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 8
     else:
       properties:
@@ -256,7 +286,7 @@ allOf:
           minItems: 1
           maxItems: 2
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 11
 
 unevaluatedProperties: false
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index b1d97fafddcf..bb5c44f8bd1c 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -178,7 +178,7 @@ yet. Bug reports are always welcome at the issue tracker below!
      - ``LLVM=1``
    * - s390
      - Maintained
-     - ``CC=clang``
+     - ``LLVM=1`` (LLVM >= 18.1.0), ``CC=clang`` (LLVM < 18.1.0)
    * - um (User Mode)
      - Maintained
      - ``LLVM=1``
diff --git a/Documentation/networking/devlink/devlink-eswitch-attr.rst b/Documentation/networking/devlink/devlink-eswitch-attr.rst
new file mode 100644
index 000000000000..08bb39ab1528
--- /dev/null
+++ b/Documentation/networking/devlink/devlink-eswitch-attr.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Devlink E-Switch Attribute
+==========================
+
+Devlink E-Switch supports two modes of operation: legacy and switchdev.
+Legacy mode operates based on traditional MAC/VLAN steering rules. Switching
+decisions are made based on MAC addresses, VLANs, etc. There is limited ability
+to offload switching rules to hardware.
+
+On the other hand, switchdev mode allows for more advanced offloading
+capabilities of the E-Switch to hardware. In switchdev mode, more switching
+rules and logic can be offloaded to the hardware switch ASIC. It enables
+representor netdevices that represent the slow path of virtual functions (VFs)
+or scalable-functions (SFs) of the device. See more information about
+:ref:`Documentation/networking/switchdev.rst <switchdev>` and
+:ref:`Documentation/networking/representors.rst <representors>`.
+
+In addition, the devlink E-Switch also comes with other attributes listed
+in the following section.
+
+Attributes Description
+======================
+
+The following is a list of E-Switch attributes.
+
+.. list-table:: E-Switch attributes
+   :widths: 8 5 45
+
+   * - Name
+     - Type
+     - Description
+   * - ``mode``
+     - enum
+     - The mode of the device. The mode can be one of the following:
+
+       * ``legacy`` operates based on traditional MAC/VLAN steering
+         rules.
+       * ``switchdev`` allows for more advanced offloading capabilities of
+         the E-Switch to hardware.
+   * - ``inline-mode``
+     - enum
+     - Some HWs need the VF driver to put part of the packet
+       headers on the TX descriptor so the e-switch can do proper
+       matching and steering. Support for both switchdev mode and legacy mode.
+
+       * ``none`` none.
+       * ``link`` L2 mode.
+       * ``network`` L3 mode.
+       * ``transport`` L4 mode.
+   * - ``encap-mode``
+     - enum
+     - The encapsulation mode of the device. Support for both switchdev mode
+       and legacy mode. The mode can be one of the following:
+
+       * ``none`` Disable encapsulation support.
+       * ``basic`` Enable encapsulation support.
+
+Example Usage
+=============
+
+.. code:: shell
+
+    # enable switchdev mode
+    $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
+
+    # set inline-mode and encap-mode
+    $ devlink dev eswitch set pci/0000:08:00.0 inline-mode none encap-mode basic
+
+    # display devlink device eswitch attributes
+    $ devlink dev eswitch show pci/0000:08:00.0
+      pci/0000:08:00.0: mode switchdev inline-mode none encap-mode basic
+
+    # enable encap-mode with legacy mode
+    $ devlink dev eswitch set pci/0000:08:00.0 mode legacy inline-mode none encap-mode basic
diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst
index e14d7a701b72..948c8c44e233 100644
--- a/Documentation/networking/devlink/index.rst
+++ b/Documentation/networking/devlink/index.rst
@@ -67,6 +67,7 @@ general.
    devlink-selftests
    devlink-trap
    devlink-linecard
+   devlink-eswitch-attr
 
 Driver-specific documentation
 -----------------------------
diff --git a/Documentation/networking/representors.rst b/Documentation/networking/representors.rst
index decb39c19b9e..5e23386f6968 100644
--- a/Documentation/networking/representors.rst
+++ b/Documentation/networking/representors.rst
@@ -1,4 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0
+.. _representors:
 
 =============================
 Network Function Representors