Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp()
  rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states
  rcu: Wire up RCU_BOOST_PRIO for rcutree
  rcu: Make rcu_torture_boost() exit loops at end of test
  rcu: Make rcu_torture_fqs() exit loops at end of test
  rcu: Permit rt_mutex_unlock() with irqs disabled
  rcu: Avoid having just-onlined CPU resched itself when RCU is idle
  rcu: Suppress NMI backtraces when stall ends before dump
  rcu: Prohibit grace periods during early boot
  rcu: Simplify unboosting checks
  rcu: Prevent early boot set_need_resched() from __rcu_pending()
  rcu: Dump local stack if cannot dump all CPUs' stacks
  rcu: Move __rcu_read_unlock()'s barrier() within if-statement
  rcu: Improve rcu_assign_pointer() and RCU_INIT_POINTER() documentation
  rcu: Make rcu_assign_pointer() unconditionally insert a memory barrier
  rcu: Make rcu_implicit_dynticks_qs() locals be correct size
  rcu: Eliminate in_irq() checks in rcu_enter_nohz()
  nohz: Remove nohz_cpu_mask
  rcu: Document interpretation of RCU-lockdep splats
  rcu: Allow rcutorture's stat_interval parameter to be changed at runtime
  ...

5 files changed, 259 insertions, 62 deletions

diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt
index bf82851a0e57..687777f83b23 100644
--- a/Documentation/RCU/NMI-RCU.txt
+++ b/Documentation/RCU/NMI-RCU.txt
@@ -95,7 +95,7 @@ not to return until all ongoing NMI handlers exit.  It is therefore safe
 to free up the handler's data as soon as synchronize_sched() returns.
 
 Important note: for this to work, the architecture in question must
-invoke irq_enter() and irq_exit() on NMI entry and exit, respectively.
+invoke nmi_enter() and nmi_exit() on NMI entry and exit, respectively.
 
 
 Answer to Quick Quiz
diff --git a/Documentation/RCU/lockdep-splat.txt b/Documentation/RCU/lockdep-splat.txt
new file mode 100644
index 000000000000..bf9061142827
--- /dev/null
+++ b/Documentation/RCU/lockdep-splat.txt
@@ -0,0 +1,110 @@
+Lockdep-RCU was added to the Linux kernel in early 2010
+(http://lwn.net/Articles/371986/).  This facility checks for some common
+misuses of the RCU API, most notably using one of the rcu_dereference()
+family to access an RCU-protected pointer without the proper protection.
+When such misuse is detected, an lockdep-RCU splat is emitted.
+
+The usual cause of a lockdep-RCU slat is someone accessing an
+RCU-protected data structure without either (1) being in the right kind of
+RCU read-side critical section or (2) holding the right update-side lock.
+This problem can therefore be serious: it might result in random memory
+overwriting or worse.  There can of course be false positives, this
+being the real world and all that.
+
+So let's look at an example RCU lockdep splat from 3.0-rc5, one that
+has long since been fixed:
+
+===============================
+[ INFO: suspicious RCU usage. ]
+-------------------------------
+block/cfq-iosched.c:2776 suspicious rcu_dereference_protected() usage!
+
+other info that might help us debug this:
+
+
+rcu_scheduler_active = 1, debug_locks = 0
+3 locks held by scsi_scan_6/1552:
+ #0:  (&shost->scan_mutex){+.+.+.}, at: [<ffffffff8145efca>]
+scsi_scan_host_selected+0x5a/0x150
+ #1:  (&eq->sysfs_lock){+.+...}, at: [<ffffffff812a5032>]
+elevator_exit+0x22/0x60
+ #2:  (&(&q->__queue_lock)->rlock){-.-...}, at: [<ffffffff812b6233>]
+cfq_exit_queue+0x43/0x190
+
+stack backtrace:
+Pid: 1552, comm: scsi_scan_6 Not tainted 3.0.0-rc5 #17
+Call Trace:
+ [<ffffffff810abb9b>] lockdep_rcu_dereference+0xbb/0xc0
+ [<ffffffff812b6139>] __cfq_exit_single_io_context+0xe9/0x120
+ [<ffffffff812b626c>] cfq_exit_queue+0x7c/0x190
+ [<ffffffff812a5046>] elevator_exit+0x36/0x60
+ [<ffffffff812a802a>] blk_cleanup_queue+0x4a/0x60
+ [<ffffffff8145cc09>] scsi_free_queue+0x9/0x10
+ [<ffffffff81460944>] __scsi_remove_device+0x84/0xd0
+ [<ffffffff8145dca3>] scsi_probe_and_add_lun+0x353/0xb10
+ [<ffffffff817da069>] ? error_exit+0x29/0xb0
+ [<ffffffff817d98ed>] ? _raw_spin_unlock_irqrestore+0x3d/0x80
+ [<ffffffff8145e722>] __scsi_scan_target+0x112/0x680
+ [<ffffffff812c690d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
+ [<ffffffff817da069>] ? error_exit+0x29/0xb0
+ [<ffffffff812bcc60>] ? kobject_del+0x40/0x40
+ [<ffffffff8145ed16>] scsi_scan_channel+0x86/0xb0
+ [<ffffffff8145f0b0>] scsi_scan_host_selected+0x140/0x150
+ [<ffffffff8145f149>] do_scsi_scan_host+0x89/0x90
+ [<ffffffff8145f170>] do_scan_async+0x20/0x160
+ [<ffffffff8145f150>] ? do_scsi_scan_host+0x90/0x90
+ [<ffffffff810975b6>] kthread+0xa6/0xb0
+ [<ffffffff817db154>] kernel_thread_helper+0x4/0x10
+ [<ffffffff81066430>] ? finish_task_switch+0x80/0x110
+ [<ffffffff817d9c04>] ? retint_restore_args+0xe/0xe
+ [<ffffffff81097510>] ? __init_kthread_worker+0x70/0x70
+ [<ffffffff817db150>] ? gs_change+0xb/0xb
+
+Line 2776 of block/cfq-iosched.c in v3.0-rc5 is as follows:
+
+	if (rcu_dereference(ioc->ioc_data) == cic) {
+
+This form says that it must be in a plain vanilla RCU read-side critical
+section, but the "other info" list above shows that this is not the
+case.  Instead, we hold three locks, one of which might be RCU related.
+And maybe that lock really does protect this reference.  If so, the fix
+is to inform RCU, perhaps by changing __cfq_exit_single_io_context() to
+take the struct request_queue "q" from cfq_exit_queue() as an argument,
+which would permit us to invoke rcu_dereference_protected as follows:
+
+	if (rcu_dereference_protected(ioc->ioc_data,
+				      lockdep_is_held(&q->queue_lock)) == cic) {
+
+With this change, there would be no lockdep-RCU splat emitted if this
+code was invoked either from within an RCU read-side critical section
+or with the ->queue_lock held.  In particular, this would have suppressed
+the above lockdep-RCU splat because ->queue_lock is held (see #2 in the
+list above).
+
+On the other hand, perhaps we really do need an RCU read-side critical
+section.  In this case, the critical section must span the use of the
+return value from rcu_dereference(), or at least until there is some
+reference count incremented or some such.  One way to handle this is to
+add rcu_read_lock() and rcu_read_unlock() as follows:
+
+	rcu_read_lock();
+	if (rcu_dereference(ioc->ioc_data) == cic) {
+		spin_lock(&ioc->lock);
+		rcu_assign_pointer(ioc->ioc_data, NULL);
+		spin_unlock(&ioc->lock);
+	}
+	rcu_read_unlock();
+
+With this change, the rcu_dereference() is always within an RCU
+read-side critical section, which again would have suppressed the
+above lockdep-RCU splat.
+
+But in this particular case, we don't actually deference the pointer
+returned from rcu_dereference().  Instead, that pointer is just compared
+to the cic pointer, which means that the rcu_dereference() can be replaced
+by rcu_access_pointer() as follows:
+
+	if (rcu_access_pointer(ioc->ioc_data) == cic) {
+
+Because it is legal to invoke rcu_access_pointer() without protection,
+this change would also suppress the above lockdep-RCU splat.
diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt
index d7a49b2f6994..a102d4b3724b 100644
--- a/Documentation/RCU/lockdep.txt
+++ b/Documentation/RCU/lockdep.txt
@@ -32,9 +32,27 @@ checking of rcu_dereference() primitives:
 	srcu_dereference(p, sp):
 		Check for SRCU read-side critical section.
 	rcu_dereference_check(p, c):
-		Use explicit check expression "c".  This is useful in
-		code that is invoked by both readers and updaters.
-	rcu_dereference_raw(p)
+		Use explicit check expression "c" along with
+		rcu_read_lock_held().  This is useful in code that is
+		invoked by both RCU readers and updaters.
+	rcu_dereference_bh_check(p, c):
+		Use explicit check expression "c" along with
+		rcu_read_lock_bh_held().  This is useful in code that
+		is invoked by both RCU-bh readers and updaters.
+	rcu_dereference_sched_check(p, c):
+		Use explicit check expression "c" along with
+		rcu_read_lock_sched_held().  This is useful in code that
+		is invoked by both RCU-sched readers and updaters.
+	srcu_dereference_check(p, c):
+		Use explicit check expression "c" along with
+		srcu_read_lock_held()().  This is useful in code that
+		is invoked by both SRCU readers and updaters.
+	rcu_dereference_index_check(p, c):
+		Use explicit check expression "c", but the caller
+		must supply one of the rcu_read_lock_held() functions.
+		This is useful in code that uses RCU-protected arrays
+		that is invoked by both RCU readers and updaters.
+	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)
 	rcu_dereference_protected(p, c):
 		Use explicit check expression "c", and omit all barriers
@@ -48,13 +66,11 @@ checking of rcu_dereference() primitives:
 		value of the pointer itself, for example, against NULL.
 
 The rcu_dereference_check() check expression can be any boolean
-expression, but would normally include one of the rcu_read_lock_held()
-family of functions and a lockdep expression.  However, any boolean
-expression can be used.  For a moderately ornate example, consider
-the following:
+expression, but would normally include a lockdep expression.  However,
+any boolean expression can be used.  For a moderately ornate example,
+consider the following:
 
 	file = rcu_dereference_check(fdt->fd[fd],
-				     rcu_read_lock_held() ||
 				     lockdep_is_held(&files->file_lock) ||
 				     atomic_read(&files->count) == 1);
 
@@ -62,7 +78,7 @@ This expression picks up the pointer "fdt->fd[fd]" in an RCU-safe manner,
 and, if CONFIG_PROVE_RCU is configured, verifies that this expression
 is used in:
 
-1.	An RCU read-side critical section, or
+1.	An RCU read-side critical section (implicit), or
 2.	with files->file_lock held, or
 3.	on an unshared files_struct.
 
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index 5d9016795fd8..783d6c134d3f 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -42,7 +42,7 @@ fqs_holdoff	Holdoff time (in microseconds) between consecutive calls
 fqs_stutter	Wait time (in seconds) between consecutive bursts
 		of calls to force_quiescent_state().
 
-irqreaders	Says to invoke RCU readers from irq level.  This is currently
+irqreader	Says to invoke RCU readers from irq level.  This is currently
 		done via timers.  Defaults to "1" for variants of RCU that
 		permit this.  (Or, more accurately, variants of RCU that do
 		-not- permit this know to ignore this variable.)
@@ -79,19 +79,68 @@ stutter		The length of time to run the test before pausing for this
 		Specifying "stutter=0" causes the test to run continuously
 		without pausing, which is the old default behavior.
 
+test_boost	Whether or not to test the ability of RCU to do priority
+		boosting.  Defaults to "test_boost=1", which performs
+		RCU priority-inversion testing only if the selected
+		RCU implementation supports priority boosting.  Specifying
+		"test_boost=0" never performs RCU priority-inversion
+		testing.  Specifying "test_boost=2" performs RCU
+		priority-inversion testing even if the selected RCU
+		implementation does not support RCU priority boosting,
+		which can be used to test rcutorture's ability to
+		carry out RCU priority-inversion testing.
+
+test_boost_interval
+		The number of seconds in an RCU priority-inversion test
+		cycle.	Defaults to "test_boost_interval=7".  It is
+		usually wise for this value to be relatively prime to
+		the value selected for "stutter".
+
+test_boost_duration
+		The number of seconds to do RCU priority-inversion testing
+		within any given "test_boost_interval".  Defaults to
+		"test_boost_duration=4".
+
 test_no_idle_hz	Whether or not to test the ability of RCU to operate in
 		a kernel that disables the scheduling-clock interrupt to
 		idle CPUs.  Boolean parameter, "1" to test, "0" otherwise.
 		Defaults to omitting this test.
 
-torture_type	The type of RCU to test: "rcu" for the rcu_read_lock() API,
-		"rcu_sync" for rcu_read_lock() with synchronous reclamation,
-		"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
-		rcu_read_lock_bh() with synchronous reclamation, "srcu" for
-		the "srcu_read_lock()" API, "sched" for the use of
-		preempt_disable() together with synchronize_sched(),
-		and "sched_expedited" for the use of preempt_disable()
-		with synchronize_sched_expedited().
+torture_type	The type of RCU to test, with string values as follows:
+
+		"rcu":  rcu_read_lock(), rcu_read_unlock() and call_rcu().
+
+		"rcu_sync":  rcu_read_lock(), rcu_read_unlock(), and
+			synchronize_rcu().
+
+		"rcu_expedited": rcu_read_lock(), rcu_read_unlock(), and
+			synchronize_rcu_expedited().
+
+		"rcu_bh": rcu_read_lock_bh(), rcu_read_unlock_bh(), and
+			call_rcu_bh().
+
+		"rcu_bh_sync": rcu_read_lock_bh(), rcu_read_unlock_bh(),
+			and synchronize_rcu_bh().
+
+		"rcu_bh_expedited": rcu_read_lock_bh(), rcu_read_unlock_bh(),
+			and synchronize_rcu_bh_expedited().
+
+		"srcu": srcu_read_lock(), srcu_read_unlock() and
+			synchronize_srcu().
+
+		"srcu_expedited": srcu_read_lock(), srcu_read_unlock() and
+			synchronize_srcu_expedited().
+
+		"sched": preempt_disable(), preempt_enable(), and
+			call_rcu_sched().
+
+		"sched_sync": preempt_disable(), preempt_enable(), and
+			synchronize_sched().
+
+		"sched_expedited": preempt_disable(), preempt_enable(), and
+			synchronize_sched_expedited().
+
+		Defaults to "rcu".
 
 verbose		Enable debug printk()s.  Default is disabled.
 
@@ -100,12 +149,12 @@ OUTPUT
 
 The statistics output is as follows:
 
-	rcu-torture: --- Start of test: nreaders=16 stat_interval=0 verbose=0
-	rcu-torture: rtc: 0000000000000000 ver: 1916 tfle: 0 rta: 1916 rtaf: 0 rtf: 1915
-	rcu-torture: Reader Pipe:  1466408 9747 0 0 0 0 0 0 0 0 0
-	rcu-torture: Reader Batch:  1464477 11678 0 0 0 0 0 0 0 0
-	rcu-torture: Free-Block Circulation:  1915 1915 1915 1915 1915 1915 1915 1915 1915 1915 0
-	rcu-torture: --- End of test
+	rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
+	rcu-torture: rtc:           (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
+	rcu-torture: Reader Pipe:  727860534 34213 0 0 0 0 0 0 0 0 0
+	rcu-torture: Reader Batch:  727877838 17003 0 0 0 0 0 0 0 0 0
+	rcu-torture: Free-Block Circulation:  155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0
+	rcu-torture:--- End of test: SUCCESS: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
 
 The command "dmesg | grep torture:" will extract this information on
 most systems.  On more esoteric configurations, it may be necessary to
@@ -113,26 +162,55 @@ use other commands to access the output of the printk()s used by
 the RCU torture test.  The printk()s use KERN_ALERT, so they should
 be evident.  ;-)
 
+The first and last lines show the rcutorture module parameters, and the
+last line shows either "SUCCESS" or "FAILURE", based on rcutorture's
+automatic determination as to whether RCU operated correctly.
+
 The entries are as follows:
 
 o	"rtc": The hexadecimal address of the structure currently visible
 	to readers.
 
-o	"ver": The number of times since boot that the rcutw writer task
+o	"ver": The number of times since boot that the RCU writer task
 	has changed the structure visible to readers.
 
 o	"tfle": If non-zero, indicates that the "torture freelist"
-	containing structure to be placed into the "rtc" area is empty.
+	containing structures to be placed into the "rtc" area is empty.
 	This condition is important, since it can fool you into thinking
 	that RCU is working when it is not.  :-/
 
 o	"rta": Number of structures allocated from the torture freelist.
 
 o	"rtaf": Number of allocations from the torture freelist that have
-	failed due to the list being empty.
+	failed due to the list being empty.  It is not unusual for this
+	to be non-zero, but it is bad for it to be a large fraction of
+	the value indicated by "rta".
 
 o	"rtf": Number of frees into the torture freelist.
 
+o	"rtmbe": A non-zero value indicates that rcutorture believes that
+	rcu_assign_pointer() and rcu_dereference() are not working
+	correctly.  This value should be zero.
+
+o	"rtbke": rcutorture was unable to create the real-time kthreads
+	used to force RCU priority inversion.  This value should be zero.
+
+o	"rtbre": Although rcutorture successfully created the kthreads
+	used to force RCU priority inversion, it was unable to set them
+	to the real-time priority level of 1.  This value should be zero.
+
+o	"rtbf": The number of times that RCU priority boosting failed
+	to resolve RCU priority inversion.
+
+o	"rtb": The number of times that rcutorture attempted to force
+	an RCU priority inversion condition.  If you are testing RCU
+	priority boosting via the "test_boost" module parameter, this
+	value should be non-zero.
+
+o	"nt": The number of times rcutorture ran RCU read-side code from
+	within a timer handler.  This value should be non-zero only
+	if you specified the "irqreader" module parameter.
+
 o	"Reader Pipe": Histogram of "ages" of structures seen by readers.
 	If any entries past the first two are non-zero, RCU is broken.
 	And rcutorture prints the error flag string "!!!" to make sure
@@ -162,26 +240,15 @@ o	"Free-Block Circulation": Shows the number of torture structures
 	somehow gets incremented farther than it should.
 
 Different implementations of RCU can provide implementation-specific
-additional information.  For example, SRCU provides the following:
+additional information.  For example, SRCU provides the following
+additional line:
 
-	srcu-torture: rtc: f8cf46a8 ver: 355 tfle: 0 rta: 356 rtaf: 0 rtf: 346 rtmbe: 0
-	srcu-torture: Reader Pipe:  559738 939 0 0 0 0 0 0 0 0 0
-	srcu-torture: Reader Batch:  560434 243 0 0 0 0 0 0 0 0
-	srcu-torture: Free-Block Circulation:  355 354 353 352 351 350 349 348 347 346 0
 	srcu-torture: per-CPU(idx=1): 0(0,1) 1(0,1) 2(0,0) 3(0,1)
 
-The first four lines are similar to those for RCU.  The last line shows
-the per-CPU counter state.  The numbers in parentheses are the values
-of the "old" and "current" counters for the corresponding CPU.  The
-"idx" value maps the "old" and "current" values to the underlying array,
-and is useful for debugging.
-
-Similarly, sched_expedited RCU provides the following:
-
-	sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
-	sched_expedited-torture: Reader Pipe:  12660320201 95875 0 0 0 0 0 0 0 0 0
-	sched_expedited-torture: Reader Batch:  12660424885 0 0 0 0 0 0 0 0 0 0
-	sched_expedited-torture: Free-Block Circulation:  1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
+This line shows the per-CPU counter state.  The numbers in parentheses are
+the values of the "old" and "current" counters for the corresponding CPU.
+The "idx" value maps the "old" and "current" values to the underlying
+array, and is useful for debugging.
 
 
 USAGE
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 8173cec473aa..aaf65f6c6cd7 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -33,23 +33,23 @@ rcu/rcuboost:
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu_sched:
-  0 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0
-  1 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0
-  2 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0
-  3 c=20942 g=20943 pq=1 pqc=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0
-  4 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0
-  5 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0
-  6 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0
-  7 c=20897 g=20897 pq=1 pqc=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0
+  0 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0
+  1 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0
+  2 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0
+  3 c=20942 g=20943 pq=1 pgp=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0
+  4 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0
+  5 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0
+  6 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0
+  7 c=20897 g=20897 pq=1 pgp=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0
 rcu_bh:
-  0 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0
-  1 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0
-  2 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0
-  3 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0
-  4 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0
-  5 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0
-  6 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0
-  7 c=1474 g=1474 pq=1 pqc=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0
+  0 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0
+  1 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0
+  2 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0
+  3 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0
+  4 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0
+  5 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0
+  6 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0
+  7 c=1474 g=1474 pq=1 pgp=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0
 
 The first section lists the rcu_data structures for rcu_sched, the second
 for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
@@ -84,7 +84,7 @@ o	"pq" indicates that this CPU has passed through a quiescent state
 	CPU has not yet reported that fact, (2) some other CPU has not
 	yet reported for this grace period, or (3) both.
 
-o	"pqc" indicates which grace period the last-observed quiescent
+o	"pgp" indicates which grace period the last-observed quiescent
 	state for this CPU corresponds to.  This is important for handling
 	the race between CPU 0 reporting an extended dynticks-idle
 	quiescent state for CPU 1 and CPU 1 suddenly waking up and
@@ -184,10 +184,14 @@ o	"kt" is the per-CPU kernel-thread state.  The digit preceding
 	The number after the final slash is the CPU that the kthread
 	is actually running on.
 
+	This field is displayed only for CONFIG_RCU_BOOST kernels.
+
 o	"ktl" is the low-order 16 bits (in hexadecimal) of the count of
 	the number of times that this CPU's per-CPU kthread has gone
 	through its loop servicing invoke_rcu_cpu_kthread() requests.
 
+	This field is displayed only for CONFIG_RCU_BOOST kernels.
+
 o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.