Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:
  e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
  d9c04209990b ("ionic: Mark error paths in the data path as unlikely")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

10 files changed, 68 insertions, 48 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index acfb4b2ee7a9..d54140f18d34 100644
--- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -59,8 +59,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index b1c13bab2472..b2d19cfb87ad 100644
--- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -77,7 +77,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9db219..580003cdfff5 100644
--- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
index c80c880a9dab..60aaf30d68ed 100644
--- a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -128,7 +128,6 @@ required:
   - cell-index
   - reg
   - fsl,fman-ports
-  - ptp-timer
 
 dependencies:
   pcs-handle-names:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 50846a2d09c8..0bf2d9f093b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -29,7 +29,6 @@ properties:
           - qcom,pm7325-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
-          - qcom,pm8008-gpio
           - qcom,pm8018-gpio
           - qcom,pm8019-gpio
           - qcom,pm8038-gpio
@@ -126,7 +125,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pm8008-gpio
               - qcom,pmi8950-gpio
               - qcom,pmr735d-gpio
     then:
@@ -448,7 +446,6 @@ $defs:
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio8 for pm7550ba
                  - gpio1-gpio4 for pm8005
-                 - gpio1-gpio2 for pm8008
                  - gpio1-gpio6 for pm8018
                  - gpio1-gpio12 for pm8038
                  - gpio1-gpio40 for pm8058
diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 7c3a565ffbef..82d142de3461 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -571,6 +571,7 @@ encoded manner. The codes are the following:
     um    userfaultfd missing tracking
     uw    userfaultfd wr-protect tracking
     ss    shadow stack page
+    sl    sealed
     ==    =======================================
 
 Note that there is no guarantee that every flag and associated mnemonic will
diff --git a/Documentation/i2c/i2c_bus.svg b/Documentation/i2c/i2c_bus.svg
index 3170de976373..45801de4af7d 100644
--- a/Documentation/i2c/i2c_bus.svg
+++ b/Documentation/i2c/i2c_bus.svg
@@ -1,5 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <!-- Created with Inkscape (http://www.inkscape.org/) -->
+<!-- Updated to inclusive terminology by Wolfram Sang -->
 
 <svg
    xmlns:dc="http://purl.org/dc/elements/1.1/"
@@ -1120,7 +1121,7 @@
     <rect
        style="opacity:1;fill:#ffb9b9;fill-opacity:1;stroke:#f00000;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
        id="rect4424-3-2-9-7"
-       width="112.5"
+       width="134.5"
        height="113.75008"
        x="112.5"
        y="471.11221"
@@ -1133,15 +1134,15 @@
        y="521.46259"
        id="text4349"><tspan
          sodipodi:role="line"
-         x="167.5354"
+         x="178.5354"
          y="521.46259"
          style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
          id="tspan1273">I2C</tspan><tspan
          sodipodi:role="line"
-         x="167.5354"
+         x="178.5354"
          y="552.71259"
          style="font-size:25px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle"
-         id="tspan1285">Master</tspan></text>
+         id="tspan1285">Controller</tspan></text>
     <rect
        style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
        id="rect4424-3-2-9-7-3-3-5-3"
@@ -1171,7 +1172,7 @@
          x="318.59131"
          y="552.08752"
          style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287">Slave</tspan></text>
+         id="tspan1287">Target</tspan></text>
     <path
        style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968767;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
        d="m 112.49995,677.36223 c 712.50005,0 712.50005,0 712.50005,0"
@@ -1233,7 +1234,7 @@
          x="468.59131"
          y="552.08746"
          style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287-6">Slave</tspan></text>
+         id="tspan1287-6">Target</tspan></text>
     <rect
        style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#b9ffb9;fill-opacity:1;fill-rule:nonzero;stroke:#006400;stroke-width:2.8125;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
        id="rect4424-3-2-9-7-3-3-5-3-1"
@@ -1258,7 +1259,7 @@
          x="618.59131"
          y="552.08746"
          style="font-size:25.00000191px;line-height:1.25;font-family:sans-serif;text-align:center;text-anchor:middle;stroke-width:1px"
-         id="tspan1287-9">Slave</tspan></text>
+         id="tspan1287-9">Target</tspan></text>
     <path
        style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.99968743;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#DotM)"
        d="m 150,583.61221 v 93.75"
diff --git a/Documentation/i2c/summary.rst b/Documentation/i2c/summary.rst
index 786c618ba3be..579a1c7df200 100644
--- a/Documentation/i2c/summary.rst
+++ b/Documentation/i2c/summary.rst
@@ -3,29 +3,27 @@ Introduction to I2C and SMBus
 =============================
 
 I²C (pronounce: I squared C and written I2C in the kernel documentation) is
-a protocol developed by Philips. It is a slow two-wire protocol (variable
-speed, up to 400 kHz), with a high speed extension (3.4 MHz).  It provides
+a protocol developed by Philips. It is a two-wire protocol with variable
+speed (typically up to 400 kHz, high speed modes up to 5 MHz). It provides
 an inexpensive bus for connecting many types of devices with infrequent or
-low bandwidth communications needs.  I2C is widely used with embedded
-systems.  Some systems use variants that don't meet branding requirements,
+low bandwidth communications needs. I2C is widely used with embedded
+systems. Some systems use variants that don't meet branding requirements,
 and so are not advertised as being I2C but come under different names,
 e.g. TWI (Two Wire Interface), IIC.
 
-The latest official I2C specification is the `"I2C-bus specification and user
-manual" (UM10204) <https://www.nxp.com/webapp/Download?colCode=UM10204>`_
-published by NXP Semiconductors. However, you need to log-in to the site to
-access the PDF. An older version of the specification (revision 6) is archived
-`here <https://web.archive.org/web/20210813122132/https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_.
+The latest official I2C specification is the `"I²C-bus specification and user
+manual" (UM10204) <https://www.nxp.com/docs/en/user-guide/UM10204.pdf>`_
+published by NXP Semiconductors, version 7 as of this writing.
 
 SMBus (System Management Bus) is based on the I2C protocol, and is mostly
-a subset of I2C protocols and signaling.  Many I2C devices will work on an
+a subset of I2C protocols and signaling. Many I2C devices will work on an
 SMBus, but some SMBus protocols add semantics beyond what is required to
-achieve I2C branding.  Modern PC mainboards rely on SMBus.  The most common
+achieve I2C branding. Modern PC mainboards rely on SMBus. The most common
 devices connected through SMBus are RAM modules configured using I2C EEPROMs,
 and hardware monitoring chips.
 
 Because the SMBus is mostly a subset of the generalized I2C bus, we can
-use its protocols on many I2C systems.  However, there are systems that don't
+use its protocols on many I2C systems. However, there are systems that don't
 meet both SMBus and I2C electrical constraints; and others which can't
 implement all the common SMBus protocol semantics or messages.
 
@@ -33,29 +31,52 @@ implement all the common SMBus protocol semantics or messages.
 Terminology
 ===========
 
-Using the terminology from the official documentation, the I2C bus connects
-one or more *master* chips and one or more *slave* chips.
+The I2C bus connects one or more controller chips and one or more target chips.
 
 .. kernel-figure::  i2c_bus.svg
-   :alt:    Simple I2C bus with one master and 3 slaves
+   :alt:    Simple I2C bus with one controller and 3 targets
 
    Simple I2C bus
 
-A **master** chip is a node that starts communications with slaves. In the
-Linux kernel implementation it is called an **adapter** or bus. Adapter
-drivers are in the ``drivers/i2c/busses/`` subdirectory.
+A **controller** chip is a node that starts communications with targets. In the
+Linux kernel implementation it is also called an "adapter" or "bus". Controller
+drivers are usually in the ``drivers/i2c/busses/`` subdirectory.
 
-An **algorithm** contains general code that can be used to implement a
-whole class of I2C adapters. Each specific adapter driver either depends on
-an algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes
-its own implementation.
+An **algorithm** contains general code that can be used to implement a whole
+class of I2C controllers. Each specific controller driver either depends on an
+algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes its
+own implementation.
 
-A **slave** chip is a node that responds to communications when addressed
-by the master. In Linux it is called a **client**. Client drivers are kept
-in a directory specific to the feature they provide, for example
-``drivers/media/gpio/`` for GPIO expanders and ``drivers/media/i2c/`` for
+A **target** chip is a node that responds to communications when addressed by a
+controller. In the Linux kernel implementation it is also called a "client".
+While targets are usually separate external chips, Linux can also act as a
+target (needs hardware support) and respond to another controller on the bus.
+This is then called a **local target**. In contrast, an external chip is called
+a **remote target**.
+
+Target drivers are kept in a directory specific to the feature they provide,
+for example ``drivers/gpio/`` for GPIO expanders and ``drivers/media/i2c/`` for
 video-related chips.
 
-For the example configuration in figure, you will need a driver for your
-I2C adapter, and drivers for your I2C devices (usually one driver for each
-device).
+For the example configuration in the figure above, you will need one driver for
+the I2C controller, and drivers for your I2C targets. Usually one driver for
+each target.
+
+Synonyms
+--------
+
+As mentioned above, the Linux I2C implementation historically uses the terms
+"adapter" for controller and "client" for target. A number of data structures
+have these synonyms in their name. So, when discussing implementation details,
+you should be aware of these terms as well. The official wording is preferred,
+though.
+
+Outdated terminology
+--------------------
+
+In earlier I2C specifications, controller was named "master" and target was
+named "slave". These terms have been obsoleted with v7 of the specification and
+their use is also discouraged by the Linux Kernel Code of Conduct. You may
+still find them in references to documentation which has not been updated. The
+general attitude, however, is to use the inclusive terms: controller and
+target. Work to replace the old terminology in the Linux Kernel is on-going.
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 6c2ab3d1c22f..683f5c3f30ad 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -1634,7 +1634,7 @@ operations:
           attributes:
             - header
         reply:
-          attributes: &pse
+          attributes:
             - header
             - podl-pse-admin-state
             - podl-pse-admin-control
@@ -1651,7 +1651,10 @@ operations:
 
       do:
         request:
-          attributes: *pse
+          attributes:
+            - header
+            - podl-pse-admin-control
+            - c33-pse-admin-control
     -
       name: rss-get
       doc: Get RSS params.
diff --git a/Documentation/netlink/specs/nfsd.yaml b/Documentation/netlink/specs/nfsd.yaml
index d21234097167..6bda7a467301 100644
--- a/Documentation/netlink/specs/nfsd.yaml
+++ b/Documentation/netlink/specs/nfsd.yaml
@@ -123,8 +123,6 @@ operations:
       doc: dump pending nfsd rpc
       attribute-set: rpc-status
       dump:
-        pre: nfsd-nl-rpc-status-get-start
-        post: nfsd-nl-rpc-status-get-done
         reply:
           attributes:
             - xid