Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 154 insertions, 11 deletions

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 160bfb0ae8ba..3ab423b80e91 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -228,6 +228,7 @@ Userspace to kernel:
   ``ETHTOOL_MSG_PLCA_GET_STATUS``       get PLCA RS status
   ``ETHTOOL_MSG_MM_GET``                get MAC merge layer state
   ``ETHTOOL_MSG_MM_SET``                set MAC merge layer parameters
+  ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT``   flash transceiver module firmware
   ===================================== =================================
 
 Kernel to userspace:
@@ -274,6 +275,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY``    PLCA RS status
   ``ETHTOOL_MSG_PLCA_NTF``                 PLCA RS parameters
   ``ETHTOOL_MSG_MM_GET_REPLY``             MAC merge layer status
+  ``ETHTOOL_MSG_MODULE_FW_FLASH_NTF``      transceiver module flash updates
   ======================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1033,6 +1035,8 @@ Kernel response contents:
   ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES``     u32     max aggr size, Tx
   ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES``    u32     max aggr packets, Tx
   ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS``    u32     time (us), aggr, Tx
+  ``ETHTOOL_A_COALESCE_RX_PROFILE``            nested  profile of DIM, Rx
+  ``ETHTOOL_A_COALESCE_TX_PROFILE``            nested  profile of DIM, Tx
   ===========================================  ======  =======================
 
 Attributes are only included in reply if their value is not zero or the
@@ -1062,6 +1066,10 @@ block should be sent.
 This feature is mainly of interest for specific USB devices which does not cope
 well with frequent small-sized URBs transmissions.
 
+``ETHTOOL_A_COALESCE_RX_PROFILE`` and ``ETHTOOL_A_COALESCE_TX_PROFILE`` refer
+to DIM parameters, see `Generic Network Dynamic Interrupt Moderation (Net DIM)
+<https://www.kernel.org/doc/Documentation/networking/net_dim.rst>`_.
+
 COALESCE_SET
 ============
 
@@ -1098,6 +1106,8 @@ Request contents:
   ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES``     u32     max aggr size, Tx
   ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES``    u32     max aggr packets, Tx
   ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS``    u32     time (us), aggr, Tx
+  ``ETHTOOL_A_COALESCE_RX_PROFILE``            nested  profile of DIM, Rx
+  ``ETHTOOL_A_COALESCE_TX_PROFILE``            nested  profile of DIM, Tx
   ===========================================  ======  =======================
 
 Request is rejected if it attributes declared as unsupported by driver (i.e.
@@ -1720,17 +1730,28 @@ Request contents:
 
 Kernel response contents:
 
-  ======================================  ======  =============================
-  ``ETHTOOL_A_PSE_HEADER``                nested  reply header
-  ``ETHTOOL_A_PODL_PSE_ADMIN_STATE``         u32  Operational state of the PoDL
-                                                  PSE functions
-  ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``         u32  power detection status of the
-                                                  PoDL PSE.
-  ``ETHTOOL_A_C33_PSE_ADMIN_STATE``          u32  Operational state of the PoE
-                                                  PSE functions.
-  ``ETHTOOL_A_C33_PSE_PW_D_STATUS``          u32  power detection status of the
-                                                  PoE PSE.
-  ======================================  ======  =============================
+  ==========================================  ======  =============================
+  ``ETHTOOL_A_PSE_HEADER``                    nested  reply header
+  ``ETHTOOL_A_PODL_PSE_ADMIN_STATE``             u32  Operational state of the PoDL
+                                                      PSE functions
+  ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``             u32  power detection status of the
+                                                      PoDL PSE.
+  ``ETHTOOL_A_C33_PSE_ADMIN_STATE``              u32  Operational state of the PoE
+                                                      PSE functions.
+  ``ETHTOOL_A_C33_PSE_PW_D_STATUS``              u32  power detection status of the
+                                                      PoE PSE.
+  ``ETHTOOL_A_C33_PSE_PW_CLASS``                 u32  power class of the PoE PSE.
+  ``ETHTOOL_A_C33_PSE_ACTUAL_PW``                u32  actual power drawn on the
+                                                      PoE PSE.
+  ``ETHTOOL_A_C33_PSE_EXT_STATE``                u32  power extended state of the
+                                                      PoE PSE.
+  ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE``             u32  power extended substatus of
+                                                      the PoE PSE.
+  ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT``           u32  currently configured power
+                                                      limit of the PoE PSE.
+  ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES``       nested  Supported power limit
+                                                      configuration ranges.
+  ==========================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
 the operational state of the PoDL PSE functions.  The operational state of the
@@ -1762,6 +1783,46 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_c33_pse_pw_d_status
 
+When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies
+the power class of the C33 PSE. It depends on the class negotiated between
+the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022``
+30.9.1.1.8 aPSEPowerClassification.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies
+This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower.
+Actual power is reported in mW.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_ext_state
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_ext_substate_class_num_events
+		  ethtool_c33_pse_ext_substate_error_condition
+		  ethtool_c33_pse_ext_substate_mr_pse_enable
+		  ethtool_c33_pse_ext_substate_option_detect_ted
+		  ethtool_c33_pse_ext_substate_option_vport_lim
+		  ethtool_c33_pse_ext_substate_ovld_detected
+		  ethtool_c33_pse_ext_substate_pd_dll_power_type
+		  ethtool_c33_pse_ext_substate_power_not_available
+		  ethtool_c33_pse_ext_substate_short_detected
+
+When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` attribute
+identifies the C33 PSE power limit in mW.
+
+When set the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested attribute
+identifies the C33 PSE power limit ranges through
+``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MIN`` and
+``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MAX``.
+If the controller works with fixed classes, the min and max values will be
+equal.
+
 PSE_SET
 =======
 
@@ -1773,6 +1834,8 @@ Request contents:
   ``ETHTOOL_A_PSE_HEADER``                nested  request header
   ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``       u32  Control PoDL PSE Admin state
   ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL``        u32  Control PSE Admin state
+  ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT``      u32  Control PoE PSE available
+                                                  power limit
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1783,6 +1846,18 @@ to control PoDL PSE Admin functions. This option is implementing
 The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
 ``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
 
+When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` attribute is
+used to control the available power value limit for C33 PSE in milliwatts.
+This attribute corresponds  to the `pse_available_power` variable described in
+``IEEE 802.3-2022`` 33.2.4.4 Variables  and `pse_avail_pwr` in 145.2.5.4
+Variables, which are described in power classes.
+
+It was decided to use milliwatts for this interface to unify it with other
+power monitoring interfaces, which also use milliwatts, and to align with
+various existing products that document power consumption in watts rather than
+classes. If power limit configuration based on classes is needed, the
+conversion can be done in user space, for example by ethtool.
+
 RSS_GET
 =======
 
@@ -2033,6 +2108,73 @@ The attributes are propagated to the driver through the following structure:
 .. kernel-doc:: include/linux/ethtool.h
     :identifiers: ethtool_mm_cfg
 
+MODULE_FW_FLASH_ACT
+===================
+
+Flashes transceiver module firmware.
+
+Request contents:
+
+  =======================================  ======  ===========================
+  ``ETHTOOL_A_MODULE_FW_FLASH_HEADER``     nested  request header
+  ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME``  string  firmware image file name
+  ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD``   u32     transceiver module password
+  =======================================  ======  ===========================
+
+The firmware update process consists of three logical steps:
+
+1. Downloading a firmware image to the transceiver module and validating it.
+2. Running the firmware image.
+3. Committing the firmware image so that it is run upon reset.
+
+When flash command is given, those three steps are taken in that order.
+
+This message merely schedules the update process and returns immediately
+without blocking. The process then runs asynchronously.
+Since it can take several minutes to complete, during the update process
+notifications are emitted from the kernel to user space updating it about
+the status and progress.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` attribute encodes the firmware
+image file name. The firmware image is downloaded to the transceiver module,
+validated, run and committed.
+
+The optional ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` attribute encodes a password
+that might be required as part of the transceiver module firmware update
+process.
+
+The firmware update process can take several minutes to complete. Therefore,
+during the update process notifications are emitted from the kernel to user
+space updating it about the status and progress.
+
+
+
+Notification contents:
+
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_HEADER``              | nested | reply header   |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS``              | u32    | status         |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG``          | string | status message |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_DONE``                | uint   | progress       |
+ +---------------------------------------------------+--------+----------------+
+ | ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL``               | uint   | total          |
+ +---------------------------------------------------+--------+----------------+
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` attribute encodes the current status
+of the firmware update process. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_module_fw_flash_status
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` attribute encodes a status message
+string.
+
+The ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` and ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL``
+attributes encode the completed and total amount of work, respectively.
+
 Request translation
 ===================
 
@@ -2139,4 +2281,5 @@ are netlink only.
   n/a                                 ``ETHTOOL_MSG_PLCA_GET_STATUS``
   n/a                                 ``ETHTOOL_MSG_MM_GET``
   n/a                                 ``ETHTOOL_MSG_MM_SET``
+  n/a                                 ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT``
   =================================== =====================================