Merge tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "It was pretty busy in EDAC land this time:

   - Altera Arria10 L2 cache and On-Chip RAM ECC handling (Thor Thayer)

   - Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac
     (Tony Luck)

   - Do not register sb_edac with pci_register_driver() (Tony Luck)

   - Add support for Skylake to ie31200_edac (Jason Baron)

   - Do not register amd64_edac with pci_register_driver() (Borislav
     Petkov)

  ... plus the usual round of cleanups and fixes all over the place"

* tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, amd64_edac: Drop pci_register_driver() use
  EDAC, ie31200_edac: Add Skylake support
  EDAC, sb_edac: Use cpu family/model in driver detection
  EDAC, i7core: Remove double buffering of error records
  EDAC, amd64_edac: Issue driver banner only on success
  ARM: socfpga: Initialize Arria10 OCRAM ECC on startup
  EDAC: Increment correct counter in edac_inc_ue_error()
  EDAC, sb_edac: Remove double buffering of error records
  EDAC: Fix used after kfree() error in edac_unregister_sysfs()
  EDAC, altera: Avoid unused function warnings
  EDAC, altera: Remove useless casts
  ARM: socfpga: Enable Arria10 OCRAM ECC on startup
  EDAC, altera: Add Arria10 OCRAM ECC support
  Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding
  EDAC, altera: Make OCRAM ECC dependency check generic
  EDAC, altera: Add register offset for ECC Enable
  EDAC, altera: Extract error inject operations to a struct fops
  ARM: socfpga: Enable Arria10 L2 cache ECC on startup
  EDAC, altera: Add Arria10 L2 Cache ECC handling
  Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding
  ...

1 files changed, 50 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 885f93d14ef9..5a6b16070a33 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -3,6 +3,7 @@ This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
 The ECC Manager counts and corrects single bit errors and counts/handles
 double bit errors which are uncorrectable.
 
+Cyclone5 and Arria5 ECC Manager
 Required Properties:
 - compatible : Should be "altr,socfpga-ecc-manager"
 - #address-cells: must be 1
@@ -47,3 +48,52 @@ Example:
 			interrupts = <0 178 1>, <0 179 1>;
 		};
 	};
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+	containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg        : Address and size for ECC block registers.
+
+Example:
+
+	eccmgr: eccmgr@ffd06000 {
+		compatible = "altr,socfpga-a10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		ranges;
+
+		l2-ecc@ffd06010 {
+			compatible = "altr,socfpga-a10-l2-ecc";
+			reg = <0xffd06010 0x4>;
+		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+		};
+	};