Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/fsl,fman.yaml b/Documentation/devicetree/bindings/net/fsl,fman.yaml
new file mode 100644
index 000000000000..9bbf39ef31a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+  etc.) the FMan node will have child nodes for each of them.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman
+    description:
+      FMan version can be determined via FM_IP_REV_1 register in the
+      FMan block. The offset is 0xc4 from the beginning of the
+      Frame Processing Manager memory map (0xc3000 from the
+      beginning of the FMan node).
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the index of the FMan unit.
+
+      The cell-index value may be used by the SoC, to identify the
+      FMan unit in the SoC memory map. In the table below,
+      there's a description of the cell-index use in each SoC:
+
+      - P1023:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DEVDISR[1]      1    0
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_DEVDISR2[6]    1    0
+      DCFG_DEVDISR2[14]    2    1
+        (Second FM available only in P4080 and P5040)
+
+      - B4860, T1040, T2080, T4240:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[24]    1    0
+      DCFG_CCSR_DEVDISR2[25]    2    1
+        (Second FM available only in T4240)
+
+      DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    items:
+      - description: BMI configuration registers.
+      - description: QMI configuration registers.
+      - description: DMA configuration registers.
+      - description: FPM configuration registers.
+      - description: FMan controller configuration registers.
+    minItems: 1
+
+  ranges: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fmanclk
+
+  interrupts:
+    items:
+      - description: The first element is associated with the event interrupts.
+      - description: the second element is associated with the error interrupts.
+
+  dma-coherent: true
+
+  ptimer-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: see ptp/fsl,ptp.yaml
+
+  fsl,qman-channel-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Specifies the range of the available dedicated
+      channels in the FMan. The first cell specifies the beginning
+      of the range and the second cell specifies the number of
+      channels
+    items:
+      - description: The first cell specifies the beginning of the range.
+      - description: |
+          The second cell specifies the number of channels.
+          Further information available at:
+          "Work Queue (WQ) Channel Assignments in the QMan" section
+          in DPAA Reference Manual.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/qman.txt
+
+  fsl,bman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/bman.txt
+
+  fsl,erratum-a050385:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: A boolean property. Indicates the presence of the
+      erratum A050385 which indicates that DMA transactions that are
+      split can result in a FMan lock.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,fman-muram.yaml
+
+  '^port@[a-f0-9]+$':
+    $ref: fsl,fman-port.yaml
+
+  '^ethernet@[a-f0-9]+$':
+    $ref: fsl,fman-dtsec.yaml
+
+  '^mdio@[a-f0-9]+$':
+    $ref: fsl,fman-mdio.yaml
+
+  '^phc@[a-f0-9]+$':
+    $ref: /schemas/ptp/fsl,ptp.yaml
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - fsl,qman-channel-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    fman@400000 {
+        compatible = "fsl,fman";
+        reg = <0x400000 0x100000>;
+        ranges = <0 0x400000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        cell-index = <1>;
+        clocks = <&fman_clk>;
+        clock-names = "fmanclk";
+        interrupts = <96 IRQ_TYPE_EDGE_FALLING>,
+                     <16 IRQ_TYPE_EDGE_FALLING>;
+        fsl,qman-channel-range = <0x40 0xc>;
+
+        muram@0 {
+            compatible = "fsl,fman-muram";
+            reg = <0x0 0x28000>;
+        };
+
+        port@81000 {
+            cell-index = <1>;
+            compatible = "fsl,fman-v2-port-oh";
+            reg = <0x81000 0x1000>;
+        };
+
+        fman1_rx_0x8: port@88000 {
+            cell-index = <0x8>;
+            compatible = "fsl,fman-v2-port-rx";
+            reg = <0x88000 0x1000>;
+        };
+
+        fman1_tx_0x28: port@a8000 {
+            cell-index = <0x28>;
+            compatible = "fsl,fman-v2-port-tx";
+            reg = <0xa8000 0x1000>;
+        };
+
+        ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            ptp-timer = <&ptp_timer>;
+            fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+            tbi-handle = <&tbi5>;
+        };
+
+        ptp_timer: phc@fe000 {
+            compatible = "fsl,fman-ptp-timer";
+            reg = <0xfe000 0x1000>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        mdio@f1000 {
+            compatible = "fsl,fman-xmdio";
+            reg = <0xf1000 0x1000>;
+            interrupts = <101 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };