Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

5 files changed, 367 insertions, 278 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
new file mode 100644
index 000000000000..f3154b19af78
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq GSWIP Ethernet switches
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+  compatible:
+    enum:
+      - lantiq,xrx200-gswip
+      - lantiq,xrx300-gswip
+      - lantiq,xrx330-gswip
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: switch
+      - const: mdio
+      - const: mii
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: lantiq,xrx200-mdio
+
+    required:
+      - compatible
+
+  gphy-fw:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      compatible:
+        items:
+          - enum:
+              - lantiq,xrx200-gphy-fw
+              - lantiq,xrx300-gphy-fw
+              - lantiq,xrx330-gphy-fw
+          - const: lantiq,gphy-fw
+
+      lantiq,rcu:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the RCU syscon
+
+    patternProperties:
+      "^gphy@[0-9a-f]{1,2}$":
+        type: object
+
+        additionalProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 255
+            description:
+              Offset of the GPHY firmware register in the RCU register range
+
+          resets:
+            items:
+              - description: GPHY reset line
+
+          reset-names:
+            items:
+              - const: gphy
+
+        required:
+          - reg
+
+    required:
+      - compatible
+      - lantiq,rcu
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    switch@e108000 {
+            compatible = "lantiq,xrx200-gswip";
+            reg = <0xe108000 0x3100>,  /* switch */
+                  <0xe10b100 0xd8>,    /* mdio */
+                  <0xe10b1d8 0x130>;   /* mii */
+            dsa,member = <0 0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+                            label = "lan3";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy0>;
+                    };
+
+                    port@1 {
+                            reg = <1>;
+                            label = "lan4";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy1>;
+                    };
+
+                    port@2 {
+                            reg = <2>;
+                            label = "lan2";
+                            phy-mode = "internal";
+                            phy-handle = <&phy11>;
+                    };
+
+                    port@4 {
+                            reg = <4>;
+                            label = "lan1";
+                            phy-mode = "internal";
+                            phy-handle = <&phy13>;
+                    };
+
+                    port@5 {
+                            reg = <5>;
+                            label = "wan";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy5>;
+                    };
+
+                    port@6 {
+                            reg = <0x6>;
+                            phy-mode = "internal";
+                            ethernet = <&eth0>;
+
+                            fixed-link {
+                                    speed = <1000>;
+                                    full-duplex;
+                            };
+                    };
+            };
+
+            mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    compatible = "lantiq,xrx200-mdio";
+
+                    phy0: ethernet-phy@0 {
+                            reg = <0x0>;
+                    };
+                    phy1: ethernet-phy@1 {
+                            reg = <0x1>;
+                    };
+                    phy5: ethernet-phy@5 {
+                            reg = <0x5>;
+                    };
+                    phy11: ethernet-phy@11 {
+                            reg = <0x11>;
+                    };
+                    phy13: ethernet-phy@13 {
+                            reg = <0x13>;
+                    };
+            };
+
+            gphy-fw {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
+                    lantiq,rcu = <&rcu0>;
+
+                    gphy@20 {
+                            reg = <0x20>;
+
+                            resets = <&reset0 31 30>;
+                            reset-names = "gphy";
+                    };
+
+                    gphy@68 {
+                            reg = <0x68>;
+
+                            resets = <&reset0 29 28>;
+                            reset-names = "gphy";
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
deleted file mode 100644
index 8bb1eff21cb1..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Lantiq GSWIP Ethernet switches
-==================================
-
-Required properties for GSWIP core:
-
-- compatible	: "lantiq,xrx200-gswip" for the embedded GSWIP in the
-		  xRX200 SoC
-		  "lantiq,xrx300-gswip" for the embedded GSWIP in the
-		  xRX300 SoC
-		  "lantiq,xrx330-gswip" for the embedded GSWIP in the
-		  xRX330 SoC
-- reg		: memory range of the GSWIP core registers
-		: memory range of the GSWIP MDIO registers
-		: memory range of the GSWIP MII registers
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
-additional required and optional properties.
-
-
-Required properties for MDIO bus:
-- compatible	: "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
-		  core of the xRX200 SoC and the PHYs connected to it.
-
-See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
-required and optional properties.
-
-
-Required properties for GPHY firmware loading:
-- compatible	: "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
-		  "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
-		  "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
-		  for the loading of the firmware into the embedded
-		  GPHY core of the SoC.
-- lantiq,rcu	: reference to the rcu syscon
-
-The GPHY firmware loader has a list of GPHY entries, one for each
-embedded GPHY
-
-- reg		: Offset of the GPHY firmware register in the RCU
-		  register range
-- resets	: list of resets of the embedded GPHY
-- reset-names	: list of names of the resets
-
-Example:
-
-Ethernet switch on the VRX200 SoC:
-
-switch@e108000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "lantiq,xrx200-gswip";
-	reg = <	0xe108000 0x3100	/* switch */
-		0xe10b100 0xd8		/* mdio */
-		0xe10b1d8 0x130		/* mii */
-		>;
-	dsa,member = <0 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan3";
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan4";
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-			phy-mode = "internal";
-			phy-handle = <&phy11>;
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan1";
-			phy-mode = "internal";
-			phy-handle = <&phy13>;
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "wan";
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-
-		port@6 {
-			reg = <0x6>;
-			ethernet = <&eth0>;
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		reg = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-		};
-	};
-
-	gphy-fw {
-		compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
-		lantiq,rcu = <&rcu0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gphy@20 {
-			reg = <0x20>;
-
-			resets = <&reset0 31 30>;
-			reset-names = "gphy";
-		};
-
-		gphy@68 {
-			reg = <0x68>;
-
-			resets = <&reset0 29 28>;
-			reset-names = "gphy";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 1c2444121e60..7e405ad96eb2 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -22,16 +22,16 @@ description: |
 
   The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
   Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
-  memory map rather than using MDIO. The switch got an internally connected 10G
+  memory map rather than using MDIO. The switch has an internally connected 10G
   CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
 
-  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  The MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has 10/100 PHYs
   and the switch registers are directly mapped into SoC's memory map rather than
   using MDIO. The DSA driver currently doesn't support MT7620 variants.
 
   There is only the standalone version of MT7531.
 
-  Port 5 on MT7530 has got various ways of configuration:
+  Port 5 on MT7530 supports various configurations:
 
     - Port 5 can be used as a CPU port.
 
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
deleted file mode 100644
index 258bef483673..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Vitesse VSC73xx Switches
-========================
-
-This defines device tree bindings for the Vitesse VSC73xx switch chips.
-The Vitesse company has been acquired by Microsemi and Microsemi has
-been acquired Microchip but retains this vendor branding.
-
-The currently supported switch chips are:
-Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
-
-This switch could have two different management interface.
-
-If SPI interface is used, the device tree node is an SPI device so it must
-reside inside a SPI bus device tree node, see spi/spi-bus.txt
-
-When the chip is connected to a parallel memory bus and work in memory-mapped
-I/O mode, a platform device is used to represent the vsc73xx. In this case it
-must reside inside a platform bus device tree node.
-
-Required properties:
-
-- compatible: must be exactly one of:
-	"vitesse,vsc7385"
-	"vitesse,vsc7388"
-	"vitesse,vsc7395"
-	"vitesse,vsc7398"
-- gpio-controller: indicates that this switch is also a GPIO controller,
-  see gpio/gpio.txt
-- #gpio-cells: this must be set to <2> and indicates that we are a twocell
-  GPIO controller, see gpio/gpio.txt
-
-Optional properties:
-
-- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
-  It should be tagged as active low.
-
-Required subnodes:
-
-See net/dsa/dsa.txt for a list of additional required and optional properties
-and subnodes of DSA switches.
-
-Examples:
-
-SPI:
-switch@0 {
-	compatible = "vitesse,vsc7395";
-	reg = <0>;
-	/* Specified for 2.5 MHz or below */
-	spi-max-frequency = <2500000>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-		vsc: port@6 {
-			reg = <6>;
-			ethernet = <&gmac1>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-};
-
-Platform:
-switch@2,0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "vitesse,vsc7385";
-	reg = <0x2 0x0 0x20000>;
-	reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-		vsc: port@6 {
-			reg = <6>;
-			ethernet = <&enet0>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml
new file mode 100644
index 000000000000..b99d7a694b70
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/vitesse,vsc73xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vitesse VSC73xx DSA Switches
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Vitesse DSA Switches were produced in the early-to-mid 2000s.
+
+  The Vitesse company has been acquired by Microsemi and Microsemi has
+  been acquired Microchip but the new owner retains this vendor branding.
+
+  The currently supported switch chips are
+  Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+
+  This switch can use one of two different management interfaces.
+
+  If SPI interface is used, the device tree node is an SPI device so it must
+  reside inside a SPI bus device tree node, see spi/spi-bus.txt
+
+  When the chip is connected to a parallel memory bus and work in memory-mapped
+  I/O mode, a platform device is used to represent the vsc73xx. In this case it
+  must reside inside a platform bus device tree node.
+
+properties:
+  compatible:
+    enum:
+      - vitesse,vsc7385
+      - vitesse,vsc7388
+      - vitesse,vsc7395
+      - vitesse,vsc7398
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+# This checks if reg is a chipselect so the device is on an SPI
+# bus, the if-clause will fail if reg is a tuple such as for a
+# platform device.
+if:
+  properties:
+    reg:
+      minimum: 0
+      maximum: 256
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-switch@0 {
+        compatible = "vitesse,vsc7395";
+        reg = <0>;
+        spi-max-frequency = <2500000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ethernet-ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet-port@0 {
+            reg = <0>;
+            label = "lan1";
+          };
+          ethernet-port@1 {
+            reg = <1>;
+            label = "lan2";
+          };
+          ethernet-port@2 {
+            reg = <2>;
+            label = "lan3";
+          };
+          ethernet-port@3 {
+            reg = <3>;
+            label = "lan4";
+          };
+          ethernet-port@6 {
+            reg = <6>;
+            ethernet = <&gmac1>;
+            phy-mode = "rgmii";
+            fixed-link {
+              speed = <1000>;
+              full-duplex;
+              pause;
+            };
+          };
+        };
+      };
+    };
+
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ethernet-switch@10000000 {
+        compatible = "vitesse,vsc7385";
+        reg = <0x10000000 0x20000>;
+        reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+
+        ethernet-ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet-port@0 {
+            reg = <0>;
+            label = "lan1";
+          };
+          ethernet-port@1 {
+            reg = <1>;
+            label = "lan2";
+          };
+          ethernet-port@2 {
+            reg = <2>;
+            label = "lan3";
+          };
+          ethernet-port@3 {
+            reg = <3>;
+            label = "lan4";
+          };
+          ethernet-port@6 {
+            reg = <6>;
+            ethernet = <&enet0>;
+            phy-mode = "rgmii";
+            fixed-link {
+              speed = <1000>;
+              full-duplex;
+              pause;
+            };
+          };
+        };
+      };
+    };