diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-21 14:35:11 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-21 14:35:11 -0700 |
| commit | f648372dfe3e8e9dc8583c2b1790388be49bb47f (patch) | |
| tree | b14bd79b9574c79537887cf268dc3e397bb6eb41 | |
| parent | 02b82b02c34321dde10d003aafcd831a769b2a8a (diff) | |
| parent | 31035f3e20af4ede5f1c8162068327ea0b35a96e (diff) | |
Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
34 files changed, 2026 insertions, 235 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-thermal b/Documentation/ABI/testing/sysfs-class-thermal index 2c52bb1f864c..8eee37982b2a 100644 --- a/Documentation/ABI/testing/sysfs-class-thermal +++ b/Documentation/ABI/testing/sysfs-class-thermal @@ -203,7 +203,7 @@ Description: - for generic ACPI: should be "Fan", "Processor" or "LCD" - for memory controller device on intel_menlow platform: - should be "Memory controller". + should be "Memory controller". RO, Required diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt deleted file mode 100644 index 33004ce7e5df..000000000000 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ /dev/null @@ -1,106 +0,0 @@ -* Exynos Thermal Management Unit (TMU) - -** Required properties: - -- compatible : One of the following: - "samsung,exynos3250-tmu" - "samsung,exynos4412-tmu" - "samsung,exynos4210-tmu" - "samsung,exynos5250-tmu" - "samsung,exynos5260-tmu" - "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420 - "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4 - Exynos5420 (Must pass triminfo base and triminfo clock) - "samsung,exynos5433-tmu" - "samsung,exynos7-tmu" -- reg : Address range of the thermal registers. For soc's which has multiple - instances of TMU and some registers are shared across all TMU's like - interrupt related then 2 set of register has to supplied. First set - belongs to register set of TMU instance and second set belongs to - registers shared with the TMU instance. - - NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU - channels 2, 3 and 4 - Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced - register, also provide clock to access that base. - - TRIMINFO at 0x1006c000 contains data for TMU channel 3 - TRIMINFO at 0x100a0000 contains data for TMU channel 4 - TRIMINFO at 0x10068000 contains data for TMU channel 2 - -- interrupts : Should contain interrupt for thermal system -- clocks : The main clocks for TMU device - -- 1. operational clock for TMU channel - -- 2. optional clock to access the shared registers of TMU channel - -- 3. optional special clock for functional operation -- clock-names : Thermal system clock name - -- "tmu_apbif" operational clock for current TMU channel - -- "tmu_triminfo_apbif" clock to access the shared triminfo register - for current TMU channel - -- "tmu_sclk" clock for functional operation of the current TMU - channel - -The Exynos TMU supports generating interrupts when reaching given -temperature thresholds. Number of supported thermal trip points depends -on the SoC (only first trip points defined in DT will be configured): - - most of SoC: 4 - - samsung,exynos5433-tmu: 8 - - samsung,exynos7-tmu: 8 - -** Optional properties: - -- vtmu-supply: This entry is optional and provides the regulator node supplying - voltage to TMU. If needed this entry can be placed inside - board/platform specific dts file. - -Example 1): - - tmu@100c0000 { - compatible = "samsung,exynos4412-tmu"; - interrupt-parent = <&combiner>; - reg = <0x100C0000 0x100>; - interrupts = <2 4>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - vtmu-supply = <&tmu_regulator_node>; - #thermal-sensor-cells = <0>; - }; - -Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register") - tmu_cpu2: tmu@10068000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 0>; - clocks = <&clock 318>, <&clock 318>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #thermal-sensor-cells = <0>; - }; - - tmu_cpu3: tmu@1006c000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 0>; - clocks = <&clock 318>, <&clock 319>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #thermal-sensor-cells = <0>; - }; - - tmu_gpu: tmu@100a0000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 0>; - clocks = <&clock 319>, <&clock 318>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #thermal-sensor-cells = <0>; - }; - -Note: For multi-instance tmu each instance should have an alias correctly -numbered in "aliases" node. - -Example: - -aliases { - tmuctrl0 = &tmuctrl_0; - tmuctrl1 = &tmuctrl_1; - tmuctrl2 = &tmuctrl_2; -}; diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml index 289e9a845600..a9b7388ca9ac 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,sdm845-lmh + - qcom,sm8150-lmh reg: items: diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d3b9e9b600a2..b6406bcc683f 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -43,6 +43,7 @@ properties: - description: v2 of TSENS items: - enum: + - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,sc7180-tsens diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml new file mode 100644 index 000000000000..17129f75d962 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/samsung,exynos-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Thermal Management Unit (TMU) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + For multi-instance tmu each instance should have an alias correctly numbered + in "aliases" node. + +properties: + compatible: + enum: + - samsung,exynos3250-tmu + - samsung,exynos4412-tmu + - samsung,exynos4210-tmu + - samsung,exynos5250-tmu + - samsung,exynos5260-tmu + # For TMU channel 0, 1 on Exynos5420: + - samsung,exynos5420-tmu + # For TMU channels 2, 3 and 4 of Exynos5420: + - samsung,exynos5420-tmu-ext-triminfo + - samsung,exynos5433-tmu + - samsung,exynos7-tmu + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + interrupts: + description: | + The Exynos TMU supports generating interrupts when reaching given + temperature thresholds. Number of supported thermal trip points depends + on the SoC (only first trip points defined in DT will be configured):: + - most of SoC: 4 + - samsung,exynos5433-tmu: 8 + - samsung,exynos7-tmu: 8 + maxItems: 1 + + reg: + items: + - description: TMU instance registers. + - description: | + Shared TMU registers. + + Note:: On Exynos5420, the TRIMINFO register is misplaced for TMU + channels 2, 3 and 4 Use "samsung,exynos5420-tmu-ext-triminfo" in + cases, there is a misplaced register, also provide clock to access + that base. + TRIMINFO at 0x1006c000 contains data for TMU channel 3 + TRIMINFO at 0x100a0000 contains data for TMU channel 4 + TRIMINFO at 0x10068000 contains data for TMU channel 2 + minItems: 1 + + '#thermal-sensor-cells': true + + vtmu-supply: + description: The regulator node supplying voltage to TMU. + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +allOf: + - $ref: /schemas/thermal/thermal-sensor.yaml + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-tmu-ext-triminfo + then: + properties: + clocks: + items: + - description: + Operational clock for TMU channel. + - description: + Optional clock to access the shared registers (e.g. TRIMINFO) of TMU + channel. + clock-names: + items: + - const: tmu_apbif + - const: tmu_triminfo_apbif + reg: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-tmu + - samsung,exynos7-tmu + then: + properties: + clocks: + items: + - description: + Operational clock for TMU channel. + - description: + Optional special clock for functional operation of TMU channel. + clock-names: + items: + - const: tmu_apbif + - const: tmu_sclk + reg: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-tmu + - samsung,exynos4412-tmu + - samsung,exynos4210-tmu + - samsung,exynos5250-tmu + - samsung,exynos5260-tmu + - samsung,exynos5420-tmu + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + reg: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + + tmu@100c0000 { + compatible = "samsung,exynos4412-tmu"; + reg = <0x100C0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + #thermal-sensor-cells = <0>; + clocks = <&clock CLK_TMU_APBIF>; + clock-names = "tmu_apbif"; + vtmu-supply = <&ldo10_reg>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tmu@10068000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + clocks = <&clock 318>, <&clock 318>; /* CLK_TMU */ + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + vtmu-supply = <&ldo7_reg>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tmu@10060000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10060000 0x200>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + clocks = <&cmu_peris 3>, /* CLK_PCLK_TMU0_APBIF */ + <&cmu_peris 35>; /* CLK_SCLK_TMU0 */ + clock-names = "tmu_apbif", "tmu_sclk"; + vtmu-supply = <&ldo3_reg>; + }; diff --git a/Documentation/driver-api/thermal/index.rst b/Documentation/driver-api/thermal/index.rst index 4cb0b9b6bfb8..030306ffa408 100644 --- a/Documentation/driver-api/thermal/index.rst +++ b/Documentation/driver-api/thermal/index.rst @@ -17,3 +17,4 @@ Thermal intel_powerclamp nouveau_thermal x86_pkg_temperature_thermal + intel_dptf diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst new file mode 100644 index 000000000000..96668dca753a --- /dev/null +++ b/Documentation/driver-api/thermal/intel_dptf.rst @@ -0,0 +1,272 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================================== +Intel(R) Dynamic Platform and Thermal Framework Sysfs Interface +=============================================================== + +:Copyright: |copy| 2022 Intel Corporation + +:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + +Introduction +------------ + +Intel(R) Dynamic Platform and Thermal Framework (DPTF) is a platform +level hardware/software solution for power and thermal management. + +As a container for multiple power/thermal technologies, DPTF provides +a coordinated approach for different policies to effect the hardware +state of a system. + +Since it is a platform level framework, this has several components. +Some parts of the technology is implemented in the firmware and uses +ACPI and PCI devices to expose various features for monitoring and +control. Linux has a set of kernel drivers exposing hardware interface +to user space. This allows user space thermal solutions like +"Linux Thermal Daemon" to read platform specific thermal and power +tables to deliver adequate performance while keeping the system under +thermal limits. + +DPTF ACPI Drivers interface +---------------------------- + +:file:`/sys/bus/platform/devices/<N>/uuids`, where <N> +=INT3400|INTC1040|INTC1041|INTC10A0 + +``available_uuids`` (RO) + A set of UUIDs strings presenting available policies + which should be notified to the firmware when the + user space can support those policies. + + UUID strings: + + "42A441D6-AE6A-462b-A84B-4A8CE79027D3" : Passive 1 + + "3A95C389-E4B8-4629-A526-C52C88626BAE" : Active + + "97C68AE7-15FA-499c-B8C9-5DA81D606E0A" : Critical + + "63BE270F-1C11-48FD-A6F7-3AF253FF3E2D" : Adaptive performance + + "5349962F-71E6-431D-9AE8-0A635B710AEE" : Emergency call + + "9E04115A-AE87-4D1C-9500-0F3E340BFE75" : Passive 2 + + "F5A35014-C209-46A4-993A-EB56DE7530A1" : Power Boss + + "6ED722A7-9240-48A5-B479-31EEF723D7CF" : Virtual Sensor + + "16CAF1B7-DD38-40ED-B1C1-1B8A1913D531" : Cooling mode + + "BE84BABF-C4D4-403D-B495-3128FD44dAC1" : HDC + +``current_uuid`` (RW) + User space can write strings from available UUIDs, one at a + time. + +:file:`/sys/bus/platform/devices/<N>/`, where <N> +=INT3400|INTC1040|INTC1041|INTC10A0 + +``imok`` (WO) + User space daemon write 1 to respond to firmware event + for sending keep alive notification. User space receives + THERMAL_EVENT_KEEP_ALIVE kobject uevent notification when + firmware calls for user space to respond with imok ACPI + method. + +``odvp*`` (RO) + Firmware thermal status variable values. Thermal tables + calls for different processing based on these variable + values. + +``data_vault`` (RO) + Binary thermal table. Refer to + https:/github.com/intel/thermal_daemon for decoding + thermal table. + + +ACPI Thermal Relationship table interface +------------------------------------------ + +:file:`/dev/acpi_thermal_rel` + + This device provides IOCTL interface to read standard ACPI + thermal relationship tables via ACPI methods _TRT and _ART. + These IOCTLs are defined in + drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h + + IOCTLs: + + ACPI_THERMAL_GET_TRT_LEN: Get length of TRT table + + ACPI_THERMAL_GET_ART_LEN: Get length of ART table + + ACPI_THERMAL_GET_TRT_COUNT: Number of records in TRT table + + ACPI_THERMAL_GET_ART_COUNT: Number of records in ART table + + ACPI_THERMAL_GET_TRT: Read binary TRT table, length to read is + provided via argument to ioctl(). + + ACPI_THERMAL_GET_ART: Read binary ART table, length to read is + provided via argument to ioctl(). + +DPTF ACPI Sensor drivers +------------------------- + +DPTF Sensor drivers are presented as standard thermal sysfs thermal_zone. + + +DPTF ACPI Cooling drivers +-------------------------- + +DPTF cooling drivers are presented as standard thermal sysfs cooling_device. + + +DPTF Processor thermal PCI Driver interface +-------------------------------------------- + +:file:`/sys/bus/pci/devices/0000\:00\:04.0/power_limits/` + +Refer to Documentation/power/powercap/powercap.rst for powercap +ABI. + +``power_limit_0_max_uw`` (RO) + Maximum powercap sysfs constraint_0_power_limit_uw for Intel RAPL + +``power_limit_0_step_uw`` (RO) + Power limit increment/decrements for Intel RAPL constraint 0 power limit + +``power_limit_0_min_uw`` (RO) + Minimum powercap sysfs constraint_0_power_limit_uw for Intel RAPL + +``power_limit_0_tmin_us`` (RO) + Minimum powercap sysfs constraint_0_time_window_us for Intel RAPL + +``power_limit_0_tmax_us`` (RO) + Maximum powercap sysfs constraint_0_time_window_us for Intel RAPL + +``power_limit_1_max_uw`` (RO) + Maximum powercap sysfs constraint_1_power_limit_uw for Intel RAPL + +``power_limit_1_step_uw`` (RO) + Power limit increment/decrements for Intel RAPL constraint 1 power limit + +``power_limit_1_min_uw`` (RO) + Minimum powercap sysfs constraint_1_power_limit_uw for Intel RAPL + +``power_limit_1_tmin_us`` (RO) + Minimum powercap sysfs constraint_1_time_window_us for Intel RAPL + +``power_limit_1_tmax_us`` (RO) + Maximum powercap sysfs constraint_1_time_window_us for Intel RAPL + +:file:`/sys/bus/pci/devices/0000\:00\:04.0/` + +``tcc_offset_degree_celsius`` (RW) + TCC offset from the critical temperature where hardware will throttle + CPU. + +:file:`/sys/bus/pci/devices/0000\:00\:04.0/workload_request` + +``workload_available_types`` (RO) + Available workload types. User space can specify one of the workload type + it is currently executing via workload_type. For example: idle, bursty, + sustained etc. + +``workload_type`` (RW) + User space can specify any one of the available workload type using + this interface. + +DPTF Processor thermal RFIM interface +-------------------------------------------- + +RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator) +and DDR (Double Data Rate)frequencies to avoid RF interference with WiFi and 5G. + +Switching voltage regulators (VR) generate radiated EMI or RFI at the +fundamental frequency and its harmonics. Some harmonics may interfere +with very sensitive wireless receivers such as Wi-Fi and cellular that +are integrated into host systems like notebook PCs. One of mitigation +methods is requesting SOC integrated VR (IVR) switching frequency to a +small % and shift away the switching noise harmonic interference from +radio channels. OEM or ODMs can use the driver to control SOC IVR +operation within the range where it does not impact IVR performance. + +DRAM devices of DDR IO interface and their power plane can generate EMI +at the data rates. Similar to IVR control mechanism, Intel offers a +mechanism by which DDR data rates can be changed if several conditions +are met: there is strong RFI interference because of DDR; CPU power +management has no other restriction in changing DDR data rates; +PC ODMs enable this feature (real time DDR RFI Mitigation referred to as +DDR-RFIM) for Wi-Fi from BIOS. + + +FIVR attributes + +:file:`/sys/bus/pci/devices/0000\:00\:04.0/fivr/` + +``vco_ref_code_lo`` (RW) + The VCO reference code is an 11-bit field and controls the FIVR + switching frequency. This is the 3-bit LSB field. + +``vco_ref_code_hi`` (RW) + The VCO reference code is an 11-bit field and controls the FIVR + switching frequency. This is the 8-bit MSB field. + +``spread_spectrum_pct`` (RW) + Set the FIVR spread spectrum clocking percentage + +``spread_spectrum_clk_enable`` (RW) + Enable/disable of the FIVR spread spectrum clocking feature + +``rfi_vco_ref_code`` (RW) + This field is a read only status register which reflects the + current FIVR switching frequency + +``fivr_fffc_rev`` (RW) + This field indicated the revision of the FIVR HW. + + +DVFS attributes + +:file:`/sys/bus/pci/devices/0000\:00\:04.0/dvfs/` + +``rfi_restriction_run_busy`` (RW) + Request the restriction of specific DDR data rate and set this + value 1. Self reset to 0 after operation. + +``rfi_restriction_err_code`` (RW) + 0 :Request is accepted, 1:Feature disabled, + 2: the request restricts more points than it is allowed + +``rfi_restriction_data_rate_Delta`` (RW) + Restricted DDR data rate for RFI protection: Lower Limit + +``rfi_restriction_data_rate_Base`` (RW) + Restricted DDR data rate for RFI protection: Upper Limit + +``ddr_data_rate_point_0`` (RO) + DDR data rate selection 1st point + +``ddr_data_rate_point_1`` (RO) + DDR data rate selection 2nd point + +``ddr_data_rate_point_2`` (RO) + DDR data rate selection 3rd point + +``ddr_data_rate_point_3`` (RO) + DDR data rate selection 4th point + +``rfi_disable (RW)`` + Disable DDR rate change feature + +DPTF Power supply and Battery Interface +---------------------------------------- + +Refer to Documentation/ABI/testing/sysfs-platform-dptf + +DPTF Fan Control +---------------------------------------- + +Refer to Documentation/admin-guide/acpi/fan_performance_states.rst diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst index f498f1d36cd3..982c8af853b9 100644 --- a/Documentation/x86/index.rst +++ b/Documentation/x86/index.rst @@ -21,6 +21,7 @@ x86-specific Documentation tlb mtrr pat + intel-hfi intel-iommu intel_txt amd-memory-encryption diff --git a/Documentation/x86/intel-hfi.rst b/Documentation/x86/intel-hfi.rst new file mode 100644 index 000000000000..49dea58ea4fb --- /dev/null +++ b/Documentation/x86/intel-hfi.rst @@ -0,0 +1,72 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================ +Hardware-Feedback Interface for scheduling on Intel Hardware +============================================================ + +Overview +-------- + +Intel has described the Hardware Feedback Interface (HFI) in the Intel 64 and +IA-32 Architectures Software Developer's Manual (Intel SDM) Volume 3 Section +14.6 [1]_. + +The HFI gives the operating system a performance and energy efficiency +capability data for each CPU in the system. Linux can use the information from +the HFI to influence task placement decisions. + +The Hardware Feedback Interface +------------------------------- + +The Hardware Feedback Interface provides to the operating system information +about the performance and energy efficiency of each CPU in the system. Each +capability is given as a unit-less quantity in the range [0-255]. Higher values +indicate higher capability. Energy efficiency and performance are reported in +separate capabilities. Even though on some systems these two metrics may be +related, they are specified as independent capabilities in the Intel SDM. + +These capabilities may change at runtime as a result of changes in the +operating conditions of the system or the action of external factors. The rate +at which these capabilities are updated is specific to each processor model. On +some models, capabilities are set at boot time and never change. On others, +capabilities may change every tens of milliseconds. For instance, a remote +mechanism may be used to lower Thermal Design Power. Such change can be +reflected in the HFI. Likewise, if the system needs to be throttled due to +excessive heat, the HFI may reflect reduced performance on specific CPUs. + +The kernel or a userspace policy daemon can use these capabilities to modify +task placement decisions. For instance, if either the performance or energy +capabilities of a given logical processor becomes zero, it is an indication that +the hardware recommends to the operating system to not schedule any tasks on +that processor for performance or energy efficiency reasons, respectively. + +Implementation details for Linux +-------------------------------- + +The infrastructure to handle thermal event interrupts has two parts. In the +Local Vector Table of a CPU's local APIC, there exists a register for the +Thermal Monitor Register. This register controls how interrupts are delivered +to a CPU when the thermal monitor generates and interrupt. Further details +can be found in the Intel SDM Vol. 3 Section 10.5 [1]_. + +The thermal monitor may generate interrupts per CPU or per package. The HFI +generates package-level interrupts. This monitor is configured and initialized +via a set of machine-specific registers. Specifically, the HFI interrupt and +status are controlled via designated bits in the IA32_PACKAGE_THERM_INTERRUPT +and IA32_PACKAGE_THERM_STATUS registers, respectively. There exists one HFI +table per package. Further details can be found in the Intel SDM Vol. 3 +Section 14.9 [1]_. + +The hardware issues an HFI interrupt after updating the HFI table and is ready +for the operating system to consume it. CPUs receive such interrupt via the +thermal entry in the Local APIC's Local Vector Table. + +When servicing such interrupt, the HFI driver parses the updated table and +relays the update to userspace using the thermal notification framework. Given +that there may be many HFI updates every second, the updates relayed to +userspace are throttled at a rate of CONFIG_HZ jiffies. + +References +---------- + +.. [1] https://www.intel.com/sdm diff --git a/MAINTAINERS b/MAINTAINERS index 4e8d9b1d6138..ac4508914b3a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17143,11 +17143,12 @@ S: Supported F: drivers/net/ethernet/samsung/sxgbe/ SAMSUNG THERMAL DRIVER -M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> +M: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> +M: Krzysztof Kozlowski <krzk@kernel.org> L: linux-pm@vger.kernel.org L: linux-samsung-soc@vger.kernel.org -S: Supported -T: git https://github.com/lmajewski/linux-samsung-thermal.git +S: Maintained +F: Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml F: drivers/thermal/samsung/ SAMSUNG USB2 PHY DRIVER diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index f7436fccc076..3edf05e98e58 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -327,6 +327,7 @@ #define X86_FEATURE_HWP_ACT_WINDOW (14*32+ 9) /* HWP Activity Window */ #define X86_FEATURE_HWP_EPP (14*32+10) /* HWP Energy Perf. Preference */ #define X86_FEATURE_HWP_PKG_REQ (14*32+11) /* HWP Package Level Request */ +#define X86_FEATURE_HFI (14*32+19) /* Hardware Feedback Interface */ /* AMD SVM Feature Identification, CPUID level 0x8000000a (EDX), word 15 */ #define X86_FEATURE_NPT (15*32+ 0) /* Nested Page Table support */ diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index a4a39c3e0f19..0e7f303542bf 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -705,12 +705,14 @@ #define PACKAGE_THERM_STATUS_PROCHOT (1 << 0) #define PACKAGE_THERM_STATUS_POWER_LIMIT (1 << 10) +#define PACKAGE_THERM_STATUS_HFI_UPDATED (1 << 26) #define MSR_IA32_PACKAGE_THERM_INTERRUPT 0x000001b2 #define PACKAGE_THERM_INT_HIGH_ENABLE (1 << 0) #define PACKAGE_THERM_INT_LOW_ENABLE (1 << 1) #define PACKAGE_THERM_INT_PLN_ENABLE (1 << 24) +#define PACKAGE_THERM_INT_HFI_ENABLE (1 << 25) /* Thermal Thresholds Support */ #define THERM_INT_THRESHOLD0_ENABLE (1 << 15) @@ -959,4 +961,8 @@ #define MSR_VM_IGNNE 0xc0010115 #define MSR_VM_HSAVE_PA 0xc0010117 +/* Hardware Feedback Interface */ +#define MSR_IA32_HW_FEEDBACK_PTR 0x17d0 +#define MSR_IA32_HW_FEEDBACK_CONFIG 0x17d1 + #endif /* _ASM_X86_MSR_INDEX_H */ diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 8df5edef1ded..0cedb8b4f00a 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -351,7 +351,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev) priv->thermal = thermal; - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_optional(pdev, 0); if (irq >= 0) { ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, brcmstb_tmon_irq_thread, diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig index c83ea5d04a1d..f0c845679250 100644 --- a/drivers/thermal/intel/Kconfig +++ b/drivers/thermal/intel/Kconfig @@ -99,3 +99,17 @@ config INTEL_MENLOW Intel Menlow platform. If unsure, say N. + +config INTEL_HFI_THERMAL + bool "Intel Hardware Feedback Interface" + depends on NET + depends on CPU_SUP_INTEL + depends on X86_THERMAL_VECTOR + select THERMAL_NETLINK + help + Select this option to enable the Hardware Feedback Interface. If + selected, hardware provides guidance to the operating system on + the performance and energy efficiency capabilities of each CPU. + These capabilities may change as a result of changes in the operating + conditions of the system such power and thermal limits. If selected, + the kernel relays updates in CPUs' capabilities to userspace. diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile index 960b56268b4a..9a8d8054f316 100644 --- a/drivers/thermal/intel/Makefile +++ b/drivers/thermal/intel/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_INTEL_TCC_COOLING) += intel_tcc_cooling.o obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o +obj-$(CONFIG_INTEL_HFI_THERMAL) += intel_hfi.o diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c index e90690a234c4..01b80331eab6 100644 --- a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c @@ -72,7 +72,6 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, int i; int nr_bad_entries = 0; struct trt *trts; - struct acpi_device *adev; union acpi_object *p; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_buffer element = { 0, NULL }; @@ -112,12 +111,10 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, if (!create_dev) continue; - result = acpi_bus_get_device(trt->source, &adev); - if (result) + if (!acpi_fetch_acpi_dev(trt->source)) pr_warn("Failed to get source ACPI device\n"); - result = acpi_bus_get_device(trt->target, &adev); - if (result) + if (!acpi_fetch_acpi_dev(trt->target)) pr_warn("Failed to get target ACPI device\n"); } @@ -149,7 +146,6 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, int i; int nr_bad_entries = 0; struct art *arts; - struct acpi_device *adev; union acpi_object *p; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_buffer element = { 0, NULL }; @@ -191,16 +187,11 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, if (!create_dev) continue; - if (art->source) { - result = acpi_bus_get_device(art->source, &adev); - if (result) - pr_warn("Failed to get source ACPI device\n"); - } - if (art->target) { - result = acpi_bus_get_device(art->target, &adev); - if (result) - pr_warn("Failed to get target ACPI device\n"); - } + if (!acpi_fetch_acpi_dev(art->source)) + pr_warn("Failed to get source ACPI device\n"); + + if (!acpi_fetch_acpi_dev(art->target)) + pr_warn("Failed to get target ACPI device\n"); } *artp = arts; diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index 4f478812cb51..4954800b9850 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -17,8 +17,8 @@ #define INT3400_KEEP_ALIVE 0xA0 enum int3400_thermal_uuid { + INT3400_THERMAL_ACTIVE = 0, INT3400_THERMAL_PASSIVE_1, - INT3400_THERMAL_ACTIVE, INT3400_THERMAL_CRITICAL, INT3400_THERMAL_ADAPTIVE_PERFORMANCE, INT3400_THERMAL_EMERGENCY_CALL_MODE, @@ -31,8 +31,8 @@ enum int3400_thermal_uuid { }; static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = { - "42A441D6-AE6A-462b-A84B-4A8CE79027D3", "3A95C389-E4B8-4629-A526-C52C88626BAE", + "42A441D6-AE6A-462b-A84B-4A8CE79027D3", "97C68AE7-15FA-499c-B8C9-5DA81D606E0A", "63BE270F-1C11-48FD-A6F7-3AF253FF3E2D", "5349962F-71E6-431D-9AE8-0A635B710AEE", @@ -53,12 +53,13 @@ struct int3400_thermal_priv { struct art *arts; int trt_count; struct trt *trts; - u8 uuid_bitmap; + u32 uuid_bitmap; int rel_misc_dev_res; int current_uuid_index; char *data_vault; int odvp_count; int *odvp; + u32 os_uuid_mask; struct odvp_attr *odvp_attrs; }; @@ -142,12 +143,55 @@ static ssize_t current_uuid_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct int3400_thermal_priv *priv = dev_get_drvdata(dev); + int i, length = 0; - if (priv->current_uuid_index == -1) - return sprintf(buf, "INVALID\n"); + if (priv->current_uuid_index > 0) + return sprintf(buf, "%s\n", + int3400_thermal_uuids[priv->current_uuid_index]); - return sprintf(buf, "%s\n", - int3400_thermal_uuids[priv->current_uuid_index]); + for (i = 0; i <= INT3400_THERMAL_CRITICAL; i++) { + if (priv->os_uuid_mask & BIT(i)) + length += scnprintf(&buf[length], + PAGE_SIZE - length, + "%s\n", + int3400_thermal_uuids[i]); + } + + if (length) + return length; + + return sprintf(buf, "INVALID\n"); +} + +static int int3400_thermal_run_osc(acpi_handle handle, char *uuid_str, int *enable) +{ + u32 ret, buf[2]; + acpi_status status; + int result = 0; + struct acpi_osc_context context = { + .uuid_str = NULL, + .rev = 1, + .cap.length = 8, + }; + + context.uuid_str = uuid_str; + + buf[OSC_QUERY_DWORD] = 0; + buf[OSC_SUPPORT_DWORD] = *enable; + + context.cap.pointer = buf; + + status = acpi_run_osc(handle, &context); + if (ACPI_SUCCESS(status)) { + ret = *((u32 *)(context.ret.pointer + 4)); + if (ret != *enable) + result = -EPERM; + } else + result = -EPERM; + + kfree(context.ret.pointer); + + return result; } static ssize_t current_uuid_store(struct device *dev, @@ -164,16 +208,47 @@ static ssize_t current_uuid_store(struct device *dev, * If we have a list of supported UUIDs, make sure * this one is supported. */ - if (priv->uuid_bitmap && - !(priv->uuid_bitmap & (1 << i))) + if (priv->uuid_bitmap & BIT(i)) { + priv->current_uuid_index = i; + return count; + } + + /* + * There is support of only 3 policies via the new + * _OSC to inform OS capability: + * INT3400_THERMAL_ACTIVE + * INT3400_THERMAL_PASSIVE_1 + * INT3400_THERMAL_CRITICAL + */ + + if (i > INT3400_THERMAL_CRITICAL) return -EINVAL; - priv->current_uuid_index = i; - return count; + priv->os_uuid_mask |= BIT(i); + + break; } } - return -EINVAL; + if (priv->os_uuid_mask) { + int cap, ret; + + /* + * Capability bits: + * Bit 0: set to 1 to indicate DPTF is active + * Bi1 1: set to 1 to active cooling is supported by user space daemon + * Bit 2: set to 1 to passive cooling is supported by user space daemon + * Bit 3: set to 1 to critical trip is handled by user space daemon + */ + cap = ((priv->os_uuid_mask << 1) | 0x01); + ret = int3400_thermal_run_osc(priv->adev->handle, + "b23ba85d-c8b7-3542-88de-8de2ffcfd698", + &cap); + if (ret) + return ret; + } + + return count; } static DEVICE_ATTR_RW(current_uuid); @@ -236,41 +311,6 @@ end: return result; } -static int int3400_thermal_run_osc(acpi_handle handle, - enum int3400_thermal_uuid uuid, bool enable) -{ - u32 ret, buf[2]; - acpi_status status; - int result = 0; - struct acpi_osc_context context = { - .uuid_str = NULL, - .rev = 1, - .cap.length = 8, - }; - - if (uuid < 0 || uuid >= INT3400_THERMAL_MAXIMUM_UUID) - return -EINVAL; - - context.uuid_str = int3400_thermal_uuids[uuid]; - - buf[OSC_QUERY_DWORD] = 0; - buf[OSC_SUPPORT_DWORD] = enable; - - context.cap.pointer = buf; - - status = acpi_run_osc(handle, &context); - if (ACPI_SUCCESS(status)) { - ret = *((u32 *)(context.ret.pointer + 4)); - if (ret != enable) - result = -EPERM; - } else - result = -EPERM; - - kfree(context.ret.pointer); - - return result; -} - static ssize_t odvp_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { @@ -426,10 +466,18 @@ static int int3400_thermal_change_mode(struct thermal_zone_device *thermal, if (!priv) return -EINVAL; - if (mode != thermal->mode) + if (mode != thermal->mode) { + int enabled; + + if (priv->current_uuid_index < 0 || + priv->current_uuid_index >= INT3400_THERMAL_MAXIMUM_UUID) + return -EINVAL; + + enabled = (mode == THERMAL_DEVICE_ENABLED); result = int3400_thermal_run_osc(priv->adev->handle, - priv->current_uuid_index, - mode == THERMAL_DEVICE_ENABLED); + int3400_thermal_uuids[priv->current_uuid_index], + &enabled); + } evaluate_odvp(priv); @@ -468,6 +516,11 @@ static void int3400_setup_gddv(struct int3400_thermal_priv *priv) priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer, obj->package.elements[0].buffer.length, GFP_KERNEL); + if (!priv->data_vault) { + kfree(buffer.pointer); + return; + } + bin_attr_data_vault.private = priv->data_vault; bin_attr_data_vault.size = obj->package.elements[0].buffer.length; kfree(buffer.pointer); diff --git a/drivers/thermal/intel/intel_hfi.c b/drivers/thermal/intel/intel_hfi.c new file mode 100644 index 000000000000..730fd121df6e --- /dev/null +++ b/drivers/thermal/intel/intel_hfi.c @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Hardware Feedback Interface Driver + * + * Copyright (c) 2021, Intel Corporation. + * + * Authors: Aubrey Li <aubrey.li@linux.intel.com> + * Ricardo Neri <ricardo.neri-calderon@linux.intel.com> + * + * + * The Hardware Feedback Interface provides a performance and energy efficiency + * capability information for each CPU in the system. Depending on the processor + * model, hardware may periodically update these capabilities as a result of + * changes in the operating conditions (e.g., power limits or thermal + * constraints). On other processor models, there is a single HFI update + * at boot. + * + * This file provides functionality to process HFI updates and relay these + * updates to userspace. + */ + +#define pr_fmt(fmt) "intel-hfi: " fmt + +#include <linux/bitops.h> +#include <linux/cpufeature.h> +#include <linux/cpumask.h> +#include <linux/gfp.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/math.h> +#include <linux/mutex.h> +#include <linux/percpu-defs.h> +#include <linux/printk.h> +#include <linux/processor.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/topology.h> +#include <linux/workqueue.h> + +#include <asm/msr.h> + +#include "../thermal_core.h" +#include "intel_hfi.h" + +#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | \ + BIT(9) | BIT(11) | BIT(26)) + +/* Hardware Feedback Interface MSR configuration bits */ +#define HW_FEEDBACK_PTR_VALID_BIT BIT(0) +#define HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT BIT(0) + +/* CPUID detection and enumeration definitions for HFI */ + +#define CPUID_HFI_LEAF 6 + +union hfi_capabilities { + struct { + u8 performance:1; + u8 energy_efficiency:1; + u8 __reserved:6; + } split; + u8 bits; +}; + +union cpuid6_edx { + struct { + union hfi_capabilities capabilities; + u32 table_pages:4; + u32 __reserved:4; + s32 index:16; + } split; + u32 full; +}; + +/** + * struct hfi_cpu_data - HFI capabilities per CPU + * @perf_cap: Performance capability + * @ee_cap: Energy efficiency capability + * + * Capabilities of a logical processor in the HFI table. These capabilities are + * unitless. + */ +struct hfi_cpu_data { + u8 perf_cap; + u8 ee_cap; +} __packed; + +/** + * struct hfi_hdr - Header of the HFI table + * @perf_updated: Hardware updated performance capabilities + * @ee_updated: Hardware updated energy efficiency capabilities + * + * Properties of the data in an HFI table. + */ +struct hfi_hdr { + u8 perf_updated; + u8 ee_updated; +} __packed; + +/** + * struct hfi_instance - Representation of an HFI instance (i.e., a table) + * @local_table: Base of the local copy of the HFI table + * @timestamp: Timestamp of the last update of the local table. + * Located at the base of the local table. + * @hdr: Base address of the header of the local table + * @data: Base address of the data of the local table + * @cpus: CPUs represented in this HFI table instance + * @hw_table: Pointer to the HFI table of this instance + * @update_work: Delayed work to process HFI updates + * @table_lock: Lock to protect acceses to the table of this instance + * @event_lock: Lock to process HFI interrupts + * + * A set of parameters to parse and navigate a specific HFI table. + */ +struct hfi_instance { + union { + void *local_table; + u64 *timestamp; + }; + void *hdr; + void *data; + cpumask_var_t cpus; + void *hw_table; + struct delayed_work update_work; + raw_spinlock_t table_lock; + raw_spinlock_t event_lock; +}; + +/** + * struct hfi_features - Supported HFI features + * @nr_table_pages: Size of the HFI table in 4KB pages + * @cpu_stride: Stride size to locate the capability data of a logical + * processor within the table (i.e., row stride) + * @hdr_size: Size of the table header + * + * Parameters and supported features that are common to all HFI instances + */ +struct hfi_features { + unsigned int nr_table_pages; + unsigned int cpu_stride; + unsigned int hdr_size; +}; + +/** + * struct hfi_cpu_info - Per-CPU attributes to consume HFI data + * @index: Row of this CPU in its HFI table + * @hfi_instance: Attributes of the HFI table to which this CPU belongs + * + * Parameters to link a logical processor to an HFI table and a row within it. + */ +struct hfi_cpu_info { + s16 index; + struct hfi_instance *hfi_instance; +}; + +static DEFINE_PER_CPU(struct hfi_cpu_info, hfi_cpu_info) = { .index = -1 }; + +static int max_hfi_instances; +static struct hfi_instance *hfi_instances; + +static struct hfi_features hfi_features; +static DEFINE_MUTEX(hfi_instance_lock); + +static struct workqueue_struct *hfi_updates_wq; +#define HFI_UPDATE_INTERVAL HZ +#define HFI_MAX_THERM_NOTIFY_COUNT 16 + +static void get_hfi_caps(struct hfi_instance *hfi_instance, + struct thermal_genl_cpu_caps *cpu_caps) +{ + int cpu, i = 0; + + raw_spin_lock_irq(&hfi_instance->table_lock); + for_each_cpu(cpu, hfi_instance->cpus) { + struct hfi_cpu_data *caps; + s16 index; + + index = per_cpu(hfi_cpu_info, cpu).index; + caps = hfi_instance->data + index * hfi_features.cpu_stride; + cpu_caps[i].cpu = cpu; + + /* + * Scale performance and energy efficiency to + * the [0, 1023] interval that thermal netlink uses. + */ + cpu_caps[i].performance = caps->perf_cap << 2; + cpu_caps[i].efficiency = caps->ee_cap << 2; + + ++i; + } + raw_spin_unlock_irq(&hfi_instance->table_lock); +} + +/* + * Call update_capabilities() when there are changes in the HFI table. + */ +static void update_capabilities(struct hfi_instance *hfi_instance) +{ + struct thermal_genl_cpu_caps *cpu_caps; + int i = 0, cpu_count; + + /* CPUs may come online/offline while processing an HFI update. */ + mutex_lock(&hfi_instance_lock); + + cpu_count = cpumask_weight(hfi_instance->cpus); + + /* No CPUs to report in this hfi_instance. */ + if (!cpu_count) + goto out; + + cpu_caps = kcalloc(cpu_count, sizeof(*cpu_caps), GFP_KERNEL); + if (!cpu_caps) + goto out; + + get_hfi_caps(hfi_instance, cpu_caps); + + if (cpu_count < HFI_MAX_THERM_NOTIFY_COUNT) + goto last_cmd; + + /* Process complete chunks of HFI_MAX_THERM_NOTIFY_COUNT capabilities. */ + for (i = 0; + (i + HFI_MAX_THERM_NOTIFY_COUNT) <= cpu_count; + i += HFI_MAX_THERM_NOTIFY_COUNT) + thermal_genl_cpu_capability_event(HFI_MAX_THERM_NOTIFY_COUNT, + &cpu_caps[i]); + + cpu_count = cpu_count - i; + +last_cmd: + /* Process the remaining capabilities if any. */ + if (cpu_count) + thermal_genl_cpu_capability_event(cpu_count, &cpu_caps[i]); + + kfree(cpu_caps); +out: + mutex_unlock(&hfi_instance_lock); +} + +static void hfi_update_work_fn(struct work_struct *work) +{ + struct hfi_instance *hfi_instance; + + hfi_instance = container_of(to_delayed_work(work), struct hfi_instance, + update_work); + if (!hfi_instance) + return; + + update_capabilities(hfi_instance); +} + +void intel_hfi_process_event(__u64 pkg_therm_status_msr_val) +{ + struct hfi_instance *hfi_instance; + int cpu = smp_processor_id(); + struct hfi_cpu_info *info; + u64 new_timestamp; + + if (!pkg_therm_status_msr_val) + return; + + info = &per_cpu(hfi_cpu_info, cpu); + if (!info) + return; + + /* + * A CPU is linked to its HFI instance before the thermal vector in the + * local APIC is unmasked. Hence, info->hfi_instance cannot be NULL + * when receiving an HFI event. + */ + hfi_instance = info->hfi_instance; + if (unlikely(!hfi_instance)) { + pr_debug("Received event on CPU %d but instance was null", cpu); + return; + } + + /* + * On most systems, all CPUs in the package receive a package-level + * thermal interrupt when there is an HFI update. It is sufficient to + * let a single CPU to acknowledge the update and queue work to + * process it. The remaining CPUs can resume their work. + */ + if (!raw_spin_trylock(&hfi_instance->event_lock)) + return; + + /* Skip duplicated updates. */ + new_timestamp = *(u64 *)hfi_instance->hw_table; + if (*hfi_instance->timestamp == new_timestamp) { + raw_spin_unlock(&hfi_instance->event_lock); + return; + } + + raw_spin_lock(&hfi_instance->table_lock); + + /* + * Copy the updated table into our local copy. This includes the new + * timestamp. + */ + memcpy(hfi_instance->local_table, hfi_instance->hw_table, + hfi_features.nr_table_pages << PAGE_SHIFT); + + raw_spin_unlock(&hfi_instance->table_lock); + raw_spin_unlock(&hfi_instance->event_lock); + + /* + * Let hardware know that we are done reading the HFI table and it is + * free to update it again. + */ + pkg_therm_status_msr_val &= THERM_STATUS_CLEAR_PKG_MASK & + ~PACKAGE_THERM_STATUS_HFI_UPDATED; + wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, pkg_therm_status_msr_val); + + queue_delayed_work(hfi_updates_wq, &hfi_instance->update_work, + HFI_UPDATE_INTERVAL); +} + +static void init_hfi_cpu_index(struct hfi_cpu_info *info) +{ + union cpuid6_edx edx; + + /* Do not re-read @cpu's index if it has already been initialized. */ + if (info->index > -1) + return; + + edx.full = cpuid_edx(CPUID_HFI_LEAF); + info->index = edx.split.index; +} + +/* + * The format of the HFI table depends on the number of capabilities that the + * hardware supports. Keep a data structure to navigate the table. + */ +static void init_hfi_instance(struct hfi_instance *hfi_instance) +{ + /* The HFI header is below the time-stamp. */ + hfi_instance->hdr = hfi_instance->local_table + + sizeof(*hfi_instance->timestamp); + + /* The HFI data starts below the header. */ + hfi_instance->data = hfi_instance->hdr + hfi_features.hdr_size; +} + +/** + * intel_hfi_online() - Enable HFI on @cpu + * @cpu: CPU in which the HFI will be enabled + * + * Enable the HFI to be used in @cpu. The HFI is enabled at the die/package + * level. The first CPU in the die/package to come online does the full HFI + * initialization. Subsequent CPUs will just link themselves to the HFI + * instance of their die/package. + * + * This function is called before enabling the thermal vector in the local APIC + * in order to ensure that @cpu has an associated HFI instance when it receives + * an HFI event. + */ +void intel_hfi_online(unsigned int cpu) +{ + struct hfi_instance *hfi_instance; + struct hfi_cpu_info *info; + phys_addr_t hw_table_pa; + u64 msr_val; + u16 die_id; + + /* Nothing to do if hfi_instances are missing. */ + if (!hfi_instances) + return; + + /* + * Link @cpu to the HFI instance of its package/die. It does not + * matter whether the instance has been initialized. + */ + info = &per_cpu(hfi_cpu_info, cpu); + die_id = topology_logical_die_id(cpu); + hfi_instance = info->hfi_instance; + if (!hfi_instance) { + if (die_id < 0 || die_id >= max_hfi_instances) + return; + + hfi_instance = &hfi_instances[die_id]; + info->hfi_instance = hfi_instance; + } + + init_hfi_cpu_index(info); + + /* + * Now check if the HFI instance of the package/die of @cpu has been + * initialized (by checking its header). In such case, all we have to + * do is to add @cpu to this instance's cpumask. + */ + mutex_lock(&hfi_instance_lock); + if (hfi_instance->hdr) { + cpumask_set_cpu(cpu, hfi_instance->cpus); + goto unlock; + } + + /* + * Hardware is programmed with the physical address of the first page + * frame of the table. Hence, the allocated memory must be page-aligned. + */ + hfi_instance->hw_table = alloc_pages_exact(hfi_features.nr_table_pages, + GFP_KERNEL | __GFP_ZERO); + if (!hfi_instance->hw_table) + goto unlock; + + hw_table_pa = virt_to_phys(hfi_instance->hw_table); + + /* + * Allocate memory to keep a local copy of the table that + * hardware generates. + */ + hfi_instance->local_table = kzalloc(hfi_features.nr_table_pages << PAGE_SHIFT, + GFP_KERNEL); + if (!hfi_instance->local_table) + goto free_hw_table; + + /* + * Program the address of the feedback table of this die/package. On + * some processors, hardware remembers the old address of the HFI table + * even after having been reprogrammed and re-enabled. Thus, do not free + * the pages allocated for the table or reprogram the hardware with a + * new base address. Namely, program the hardware only once. + */ + msr_val = hw_table_pa | HW_FEEDBACK_PTR_VALID_BIT; + wrmsrl(MSR_IA32_HW_FEEDBACK_PTR, msr_val); + + init_hfi_instance(hfi_instance); + + INIT_DELAYED_WORK(&hfi_instance->update_work, hfi_update_work_fn); + raw_spin_lock_init(&hfi_instance->table_lock); + raw_spin_lock_init(&hfi_instance->event_lock); + + cpumask_set_cpu(cpu, hfi_instance->cpus); + + /* + * Enable the hardware feedback interface and never disable it. See + * comment on programming the address of the table. + */ + rdmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val); + msr_val |= HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT; + wrmsrl(MSR_IA32_HW_FEEDBACK_CONFIG, msr_val); + +unlock: + mutex_unlock(&hfi_instance_lock); + return; + +free_hw_table: + free_pages_exact(hfi_instance->hw_table, hfi_features.nr_table_pages); + goto unlock; +} + +/** + * intel_hfi_offline() - Disable HFI on @cpu + * @cpu: CPU in which the HFI will be disabled + * + * Remove @cpu from those covered by its HFI instance. + * + * On some processors, hardware remembers previous programming settings even + * after being reprogrammed. Thus, keep HFI enabled even if all CPUs in the + * die/package of @cpu are offline. See note in intel_hfi_online(). + */ +void intel_hfi_offline(unsigned int cpu) +{ + struct hfi_cpu_info *info = &per_cpu(hfi_cpu_info, cpu); + struct hfi_instance *hfi_instance; + + /* + * Check if @cpu as an associated, initialized (i.e., with a non-NULL + * header). Also, HFI instances are only initialized if X86_FEATURE_HFI + * is present. + */ + hfi_instance = info->hfi_instance; + if (!hfi_instance) + return; + + if (!hfi_instance->hdr) + return; + + mutex_lock(&hfi_instance_lock); + cpumask_clear_cpu(cpu, hfi_instance->cpus); + mutex_unlock(&hfi_instance_lock); +} + +static __init int hfi_parse_features(void) +{ + unsigned int nr_capabilities; + union cpuid6_edx edx; + + if (!boot_cpu_has(X86_FEATURE_HFI)) + return -ENODEV; + + /* + * If we are here we know that CPUID_HFI_LEAF exists. Parse the + * supported capabilities and the size of the HFI table. + */ + edx.full = cpuid_edx(CPUID_HFI_LEAF); + + if (!edx.split.capabilities.split.performance) { + pr_debug("Performance reporting not supported! Not using HFI\n"); + return -ENODEV; + } + + /* + * The number of supported capabilities determines the number of + * columns in the HFI table. Exclude the reserved bits. + */ + edx.split.capabilities.split.__reserved = 0; + nr_capabilities = hweight8(edx.split.capabilities.bits); + + /* The number of 4KB pages required by the table */ + hfi_features.nr_table_pages = edx.split.table_pages + 1; + + /* + * The header contains change indications for each supported feature. + * The size of the table header is rounded up to be a multiple of 8 + * bytes. + */ + hfi_features.hdr_size = DIV_ROUND_UP(nr_capabilities, 8) * 8; + + /* + * Data of each logical processor is also rounded up to be a multiple + * of 8 bytes. + */ + hfi_features.cpu_stride = DIV_ROUND_UP(nr_capabilities, 8) * 8; + + return 0; +} + +void __init intel_hfi_init(void) +{ + struct hfi_instance *hfi_instance; + int i, j; + + if (hfi_parse_features()) + return; + + /* There is one HFI instance per die/package. */ + max_hfi_instances = topology_max_packages() * + topology_max_die_per_package(); + + /* + * This allocation may fail. CPU hotplug callbacks must check + * for a null pointer. + */ + hfi_instances = kcalloc(max_hfi_instances, sizeof(*hfi_instances), + GFP_KERNEL); + if (!hfi_instances) + return; + + for (i = 0; i < max_hfi_instances; i++) { + hfi_instance = &hfi_instances[i]; + if (!zalloc_cpumask_var(&hfi_instance->cpus, GFP_KERNEL)) + goto err_nomem; + } + + hfi_updates_wq = create_singlethread_workqueue("hfi-updates"); + if (!hfi_updates_wq) + goto err_nomem; + + return; + +err_nomem: + for (j = 0; j < i; ++j) { + hfi_instance = &hfi_instances[j]; + free_cpumask_var(hfi_instance->cpus); + } + + kfree(hfi_instances); + hfi_instances = NULL; +} diff --git a/drivers/thermal/intel/intel_hfi.h b/drivers/thermal/intel/intel_hfi.h new file mode 100644 index 000000000000..325aa78b745c --- /dev/null +++ b/drivers/thermal/intel/intel_hfi.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _INTEL_HFI_H +#define _INTEL_HFI_H + +#if defined(CONFIG_INTEL_HFI_THERMAL) +void __init intel_hfi_init(void); +void intel_hfi_online(unsigned int cpu); +void intel_hfi_offline(unsigned int cpu); +void intel_hfi_process_event(__u64 pkg_therm_status_msr_val); +#else +static inline void intel_hfi_init(void) { } +static inline void intel_hfi_online(unsigned int cpu) { } +static inline void intel_hfi_offline(unsigned int cpu) { } +static inline void intel_hfi_process_event(__u64 pkg_therm_status_msr_val) { } +#endif /* CONFIG_INTEL_HFI_THERMAL */ + +#endif /* _INTEL_HFI_H */ diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c index 14256421d98c..c841ab37e7c6 100644 --- a/drivers/thermal/intel/intel_powerclamp.c +++ b/drivers/thermal/intel/intel_powerclamp.c @@ -556,12 +556,9 @@ static void end_power_clamp(void) * stop faster. */ clamping = false; - if (bitmap_weight(cpu_clamping_mask, num_possible_cpus())) { - for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) { - pr_debug("clamping worker for cpu %d alive, destroy\n", - i); - stop_power_clamp_worker(i); - } + for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) { + pr_debug("clamping worker for cpu %d alive, destroy\n", i); + stop_power_clamp_worker(i); } } diff --git a/drivers/thermal/intel/therm_throt.c b/drivers/thermal/intel/therm_throt.c index dab7e8fb1059..8352083b87c7 100644 --- a/drivers/thermal/intel/therm_throt.c +++ b/drivers/thermal/intel/therm_throt.c @@ -32,6 +32,7 @@ #include <asm/irq.h> #include <asm/msr.h> +#include "intel_hfi.h" #include "thermal_interrupt.h" /* How long to wait between reporting thermal events */ @@ -475,6 +476,13 @@ static int thermal_throttle_online(unsigned int cpu) INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work); INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work); + /* + * The first CPU coming online will enable the HFI. Usually this causes + * hardware to issue an HFI thermal interrupt. Such interrupt will reach + * the CPU once we enable the thermal vector in the local APIC. + */ + intel_hfi_online(cpu); + /* Unmask the thermal vector after the above workqueues are initialized. */ l = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); @@ -492,6 +500,8 @@ static int thermal_throttle_offline(unsigned int cpu) l = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED); + intel_hfi_offline(cpu); + cancel_delayed_work_sync(&state->package_throttle.therm_work); cancel_delayed_work_sync(&state->core_throttle.therm_work); @@ -509,6 +519,8 @@ static __init int thermal_throttle_init_device(void) if (!atomic_read(&therm_throt_en)) return 0; + intel_hfi_init(); + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online", thermal_throttle_online, thermal_throttle_offline); @@ -608,6 +620,10 @@ void intel_thermal_interrupt(void) PACKAGE_THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, PACKAGE_LEVEL); + + if (this_cpu_has(X86_FEATURE_HFI)) + intel_hfi_process_event(msr_val & + PACKAGE_THERM_STATUS_HFI_UPDATED); } } @@ -717,6 +733,12 @@ void intel_init_thermal(struct cpuinfo_x86 *c) wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l | (PACKAGE_THERM_INT_LOW_ENABLE | PACKAGE_THERM_INT_HIGH_ENABLE), h); + + if (cpu_has(c, X86_FEATURE_HFI)) { + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | PACKAGE_THERM_INT_HFI_ENABLE, h); + } } rdmsr(MSR_IA32_MISC_ENABLE, l, h); diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c index eafa7526eb8b..c7f91cbdccc7 100644 --- a/drivers/thermal/qcom/lmh.c +++ b/drivers/thermal/qcom/lmh.c @@ -28,6 +28,8 @@ #define LMH_REG_DCVS_INTR_CLR 0x8 +#define LMH_ENABLE_ALGOS 1 + struct lmh_hw_data { void __iomem *base; struct irq_domain *domain; @@ -90,6 +92,7 @@ static int lmh_probe(struct platform_device *pdev) struct device_node *cpu_node; struct lmh_hw_data *lmh_data; int temp_low, temp_high, temp_arm, cpu_id, ret; + unsigned int enable_alg; u32 node_id; lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL); @@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev) if (!qcom_scm_lmh_dcvsh_available()) return -EINVAL; - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, - LMH_NODE_DCVS, node_id, 0); - if (ret) - dev_err(dev, "Error %d enabling current subfunction\n", ret); - - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, - LMH_NODE_DCVS, node_id, 0); - if (ret) - dev_err(dev, "Error %d enabling reliability subfunction\n", ret); - - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, - LMH_NODE_DCVS, node_id, 0); - if (ret) - dev_err(dev, "Error %d enabling BCL subfunction\n", ret); - - ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, - LMH_NODE_DCVS, node_id, 0); - if (ret) { - dev_err(dev, "Error %d enabling thermal subfunction\n", ret); - return ret; - } - - ret = qcom_scm_lmh_profile_change(0x1); - if (ret) { - dev_err(dev, "Error %d changing profile\n", ret); - return ret; + enable_alg = (uintptr_t)of_device_get_match_data(dev); + + if (enable_alg) { + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling current subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling reliability subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling BCL subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error %d enabling thermal subfunction\n", ret); + return ret; + } + + ret = qcom_scm_lmh_profile_change(0x1); + if (ret) { + dev_err(dev, "Error %d changing profile\n", ret); + return ret; + } } /* Set default thermal trips */ @@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev) } static const struct of_device_id lmh_table[] = { - { .compatible = "qcom,sdm845-lmh", }, + { .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS}, + { .compatible = "qcom,sm8150-lmh", }, {} }; MODULE_DEVICE_TABLE(of, lmh_table); diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 99a8d9f3e03c..154d3cb19c88 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -18,6 +18,7 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <linux/thermal.h> +#include "../thermal_hwmon.h" #include "tsens.h" /** @@ -1060,6 +1061,10 @@ static int tsens_register(struct tsens_priv *priv) priv->sensor[i].tzd = tzd; if (priv->ops->enable) priv->ops->enable(priv, i); + + if (devm_thermal_add_hwmon_sysfs(tzd)) + dev_warn(priv->dev, + "Failed to add hwmon sysfs attributes\n"); } /* VER_0 require to set MIN and MAX THRESH diff --git a/drivers/thermal/tegra/tegra-bpmp-thermal.c b/drivers/thermal/tegra/tegra-bpmp-thermal.c index 94f1da1dcd69..5affc3d196be 100644 --- a/drivers/thermal/tegra/tegra-bpmp-thermal.c +++ b/drivers/thermal/tegra/tegra-bpmp-thermal.c @@ -52,6 +52,8 @@ static int tegra_bpmp_thermal_get_temp(void *data, int *out_temp) err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg); if (err) return err; + if (msg.rx.ret) + return -EINVAL; *out_temp = reply.get_temp.temp; @@ -63,6 +65,7 @@ static int tegra_bpmp_thermal_set_trips(void *data, int low, int high) struct tegra_bpmp_thermal_zone *zone = data; struct mrq_thermal_host_to_bpmp_request req; struct tegra_bpmp_message msg; + int err; memset(&req, 0, sizeof(req)); req.type = CMD_THERMAL_SET_TRIP; @@ -76,7 +79,13 @@ static int tegra_bpmp_thermal_set_trips(void *data, int low, int high) msg.tx.data = &req; msg.tx.size = sizeof(req); - return tegra_bpmp_transfer(zone->tegra->bpmp, &msg); + err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg); + if (err) + return err; + if (msg.rx.ret) + return -EINVAL; + + return 0; } static void tz_device_update_work_fn(struct work_struct *work) @@ -140,6 +149,8 @@ static int tegra_bpmp_thermal_get_num_zones(struct tegra_bpmp *bpmp, err = tegra_bpmp_transfer(bpmp, &msg); if (err) return err; + if (msg.rx.ret) + return -EINVAL; *num_zones = reply.get_num_zones.num; diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c index 73e68cce292e..32fea5174cc0 100644 --- a/drivers/thermal/thermal_netlink.c +++ b/drivers/thermal/thermal_netlink.c @@ -43,6 +43,11 @@ static const struct nla_policy thermal_genl_policy[THERMAL_GENL_ATTR_MAX + 1] = [THERMAL_GENL_ATTR_CDEV_MAX_STATE] = { .type = NLA_U32 }, [THERMAL_GENL_ATTR_CDEV_NAME] = { .type = NLA_STRING, .len = THERMAL_NAME_LENGTH }, + /* CPU capabilities */ + [THERMAL_GENL_ATTR_CPU_CAPABILITY] = { .type = NLA_NESTED }, + [THERMAL_GENL_ATTR_CPU_CAPABILITY_ID] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE] = { .type = NLA_U32 }, + [THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY] = { .type = NLA_U32 }, }; struct param { @@ -58,6 +63,8 @@ struct param { int temp; int cdev_state; int cdev_max_state; + struct thermal_genl_cpu_caps *cpu_capabilities; + int cpu_capabilities_count; }; typedef int (*cb_t)(struct param *); @@ -190,6 +197,42 @@ static int thermal_genl_event_gov_change(struct param *p) return 0; } +static int thermal_genl_event_cpu_capability_change(struct param *p) +{ + struct thermal_genl_cpu_caps *cpu_cap = p->cpu_capabilities; + struct sk_buff *msg = p->msg; + struct nlattr *start_cap; + int i; + + start_cap = nla_nest_start(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY); + if (!start_cap) + return -EMSGSIZE; + + for (i = 0; i < p->cpu_capabilities_count; ++i) { + if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_ID, + cpu_cap->cpu)) + goto out_cancel_nest; + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE, + cpu_cap->performance)) + goto out_cancel_nest; + + if (nla_put_u32(msg, THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY, + cpu_cap->efficiency)) + goto out_cancel_nest; + + ++cpu_cap; + } + + nla_nest_end(msg, start_cap); + + return 0; +out_cancel_nest: + nla_nest_cancel(msg, start_cap); + + return -EMSGSIZE; +} + int thermal_genl_event_tz_delete(struct param *p) __attribute__((alias("thermal_genl_event_tz"))); @@ -219,6 +262,7 @@ static cb_t event_cb[] = { [THERMAL_GENL_EVENT_CDEV_DELETE] = thermal_genl_event_cdev_delete, [THERMAL_GENL_EVENT_CDEV_STATE_UPDATE] = thermal_genl_event_cdev_state_update, [THERMAL_GENL_EVENT_TZ_GOV_CHANGE] = thermal_genl_event_gov_change, + [THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE] = thermal_genl_event_cpu_capability_change, }; /* @@ -356,6 +400,15 @@ int thermal_notify_tz_gov_change(int tz_id, const char *name) return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_GOV_CHANGE, &p); } +int thermal_genl_cpu_capability_event(int count, + struct thermal_genl_cpu_caps *caps) +{ + struct param p = { .cpu_capabilities_count = count, .cpu_capabilities = caps }; + + return thermal_genl_send_event(THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE, &p); +} +EXPORT_SYMBOL_GPL(thermal_genl_cpu_capability_event); + /*************************** Command encoding ********************************/ static int __thermal_genl_cmd_tz_get_id(struct thermal_zone_device *tz, diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h index e554f76291f4..1052f523188d 100644 --- a/drivers/thermal/thermal_netlink.h +++ b/drivers/thermal/thermal_netlink.h @@ -4,6 +4,12 @@ * Author: Daniel Lezcano <daniel.lezcano@linaro.org> */ +struct thermal_genl_cpu_caps { + int cpu; + int performance; + int efficiency; +}; + /* Netlink notification function */ #ifdef CONFIG_THERMAL_NETLINK int __init thermal_netlink_init(void); @@ -23,6 +29,8 @@ int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state); int thermal_notify_cdev_delete(int cdev_id); int thermal_notify_tz_gov_change(int tz_id, const char *name); int thermal_genl_sampling_temp(int id, int temp); +int thermal_genl_cpu_capability_event(int count, + struct thermal_genl_cpu_caps *caps); #else static inline int thermal_netlink_init(void) { @@ -101,4 +109,10 @@ static inline int thermal_genl_sampling_temp(int id, int temp) { return 0; } + +static inline int thermal_genl_cpu_capability_event(int count, struct thermal_genl_cpu_caps *caps) +{ + return 0; +} + #endif /* CONFIG_THERMAL_NETLINK */ diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index f84375865c97..703039d8b937 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -21,6 +21,7 @@ #include "ti-thermal.h" #include "ti-bandgap.h" +#include "../thermal_hwmon.h" /* common data structures */ struct ti_thermal_data { @@ -106,14 +107,6 @@ static inline int __ti_thermal_get_temp(void *devdata, int *temp) return ret; } -static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, - int *temp) -{ - struct ti_thermal_data *data = thermal->devdata; - - return __ti_thermal_get_temp(data, temp); -} - static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend) { struct ti_thermal_data *data = p; @@ -189,6 +182,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, ti_bandgap_set_sensor_data(bgp, id, data); ti_bandgap_write_update_interval(bgp, data->sensor_id, interval); + if (devm_thermal_add_hwmon_sysfs(data->ti_thermal)) + dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n"); + return 0; } diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h index 9aa2fedfa309..fc78bf3aead7 100644 --- a/include/uapi/linux/thermal.h +++ b/include/uapi/linux/thermal.h @@ -44,7 +44,10 @@ enum thermal_genl_attr { THERMAL_GENL_ATTR_CDEV_MAX_STATE, THERMAL_GENL_ATTR_CDEV_NAME, THERMAL_GENL_ATTR_GOV_NAME, - + THERMAL_GENL_ATTR_CPU_CAPABILITY, + THERMAL_GENL_ATTR_CPU_CAPABILITY_ID, + THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE, + THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY, __THERMAL_GENL_ATTR_MAX, }; #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) @@ -71,6 +74,7 @@ enum thermal_genl_event { THERMAL_GENL_EVENT_CDEV_DELETE, /* Cdev unbound */ THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, /* Cdev state updated */ THERMAL_GENL_EVENT_TZ_GOV_CHANGE, /* Governor policy changed */ + THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE, /* CPU capability changed */ __THERMAL_GENL_EVENT_MAX, }; #define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1) diff --git a/tools/power/x86/intel-speed-select/Build b/tools/power/x86/intel-speed-select/Build index b61456d75190..81e36bd578b1 100644 --- a/tools/power/x86/intel-speed-select/Build +++ b/tools/power/x86/intel-speed-select/Build @@ -1 +1 @@ -intel-speed-select-y += isst-config.o isst-core.o isst-display.o +intel-speed-select-y += isst-config.o isst-core.o isst-display.o isst-daemon.o hfi-events.o diff --git a/tools/power/x86/intel-speed-select/Makefile b/tools/power/x86/intel-speed-select/Makefile index 12c6939dca2a..d2fba1297d96 100644 --- a/tools/power/x86/intel-speed-select/Makefile +++ b/tools/power/x86/intel-speed-select/Makefile @@ -13,8 +13,8 @@ endif # Do not use make's built-in rules # (this improves performance and avoids hard-to-debug behaviour); MAKEFLAGS += -r - -override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include +override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include -I/usr/include/libnl3 +override LDFLAGS += -lnl-genl-3 -lnl-3 ALL_TARGETS := intel-speed-select ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) @@ -31,7 +31,11 @@ $(OUTPUT)include/linux/isst_if.h: ../../../../include/uapi/linux/isst_if.h mkdir -p $(OUTPUT)include/linux 2>&1 || true ln -sf $(CURDIR)/../../../../include/uapi/linux/isst_if.h $@ -prepare: $(OUTPUT)include/linux/isst_if.h +$(OUTPUT)include/linux/thermal.h: ../../../../include/uapi/linux/thermal.h + mkdir -p $(OUTPUT)include/linux 2>&1 || true + ln -sf $(CURDIR)/../../../../include/uapi/linux/thermal.h $@ + +prepare: $(OUTPUT)include/linux/isst_if.h $(OUTPUT)include/linux/thermal.h ISST_IN := $(OUTPUT)intel-speed-select-in.o diff --git a/tools/power/x86/intel-speed-select/hfi-events.c b/tools/power/x86/intel-speed-select/hfi-events.c new file mode 100644 index 000000000000..e85676711372 --- /dev/null +++ b/tools/power/x86/intel-speed-select/hfi-events.c @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Read HFI events for OOB + * Copyright (c) 2022 Intel Corporation. + */ + +/* + * This file incorporates work covered by the following copyright and + * permission notice: + + * WPA Supplicant - driver interaction with Linux nl80211/cfg80211 + * Copyright (c) 2003-2008, Jouni Malinen <j@w1.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Alternatively, this software may be distributed under the terms of + * BSD license. + * + * Requires + * libnl-genl-3-dev + * + * For Fedora/CenOS + * dnf install libnl3-devel + * For Ubuntu + * apt install libnl-3-dev libnl-genl-3-dev + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/file.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <errno.h> +#include <getopt.h> +#include <signal.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/family.h> +#include <netlink/genl/ctrl.h> + +#include <linux/thermal.h> +#include "isst.h" + +struct hfi_event_data { + struct nl_sock *nl_handle; + struct nl_cb *nl_cb; +}; + +struct hfi_event_data drv; + +static int ack_handler(struct nl_msg *msg, void *arg) +{ + int *err = arg; + *err = 0; + return NL_STOP; +} + +static int finish_handler(struct nl_msg *msg, void *arg) +{ + int *ret = arg; + *ret = 0; + return NL_SKIP; +} + +static int error_handler(struct sockaddr_nl *nla, struct nlmsgerr *err, + void *arg) +{ + int *ret = arg; + *ret = err->error; + return NL_SKIP; +} + +static int seq_check_handler(struct nl_msg *msg, void *arg) +{ + return NL_OK; +} + +static int send_and_recv_msgs(struct hfi_event_data *drv, + struct nl_msg *msg, + int (*valid_handler)(struct nl_msg *, void *), + void *valid_data) +{ + struct nl_cb *cb; + int err = -ENOMEM; + + cb = nl_cb_clone(drv->nl_cb); + if (!cb) + goto out; + + err = nl_send_auto_complete(drv->nl_handle, msg); + if (err < 0) + goto out; + + err = 1; + + nl_cb_err(cb, NL_CB_CUSTOM, error_handler, &err); + nl_cb_set(cb, NL_CB_FINISH, NL_CB_CUSTOM, finish_handler, &err); + nl_cb_set(cb, NL_CB_ACK, NL_CB_CUSTOM, ack_handler, &err); + + if (valid_handler) + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, + valid_handler, valid_data); + + while (err > 0) + nl_recvmsgs(drv->nl_handle, cb); + out: + nl_cb_put(cb); + nlmsg_free(msg); + return err; +} + +struct family_data { + const char *group; + int id; +}; + +static int family_handler(struct nl_msg *msg, void *arg) +{ + struct family_data *res = arg; + struct nlattr *tb[CTRL_ATTR_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *mcgrp; + int i; + + nla_parse(tb, CTRL_ATTR_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + if (!tb[CTRL_ATTR_MCAST_GROUPS]) + return NL_SKIP; + + nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], i) { + struct nlattr *tb2[CTRL_ATTR_MCAST_GRP_MAX + 1]; + nla_parse(tb2, CTRL_ATTR_MCAST_GRP_MAX, nla_data(mcgrp), + nla_len(mcgrp), NULL); + if (!tb2[CTRL_ATTR_MCAST_GRP_NAME] || + !tb2[CTRL_ATTR_MCAST_GRP_ID] || + strncmp(nla_data(tb2[CTRL_ATTR_MCAST_GRP_NAME]), + res->group, + nla_len(tb2[CTRL_ATTR_MCAST_GRP_NAME])) != 0) + continue; + res->id = nla_get_u32(tb2[CTRL_ATTR_MCAST_GRP_ID]); + break; + }; + + return 0; +} + +static int nl_get_multicast_id(struct hfi_event_data *drv, + const char *family, const char *group) +{ + struct nl_msg *msg; + int ret = -1; + struct family_data res = { group, -ENOENT }; + + msg = nlmsg_alloc(); + if (!msg) + return -ENOMEM; + genlmsg_put(msg, 0, 0, genl_ctrl_resolve(drv->nl_handle, "nlctrl"), + 0, 0, CTRL_CMD_GETFAMILY, 0); + NLA_PUT_STRING(msg, CTRL_ATTR_FAMILY_NAME, family); + + ret = send_and_recv_msgs(drv, msg, family_handler, &res); + msg = NULL; + if (ret == 0) + ret = res.id; + +nla_put_failure: + nlmsg_free(msg); + return ret; +} + +struct perf_cap { + int cpu; + int perf; + int eff; +}; + +static void process_hfi_event(struct perf_cap *perf_cap) +{ + process_level_change(perf_cap->cpu); +} + +static int handle_event(struct nl_msg *n, void *arg) +{ + struct nlmsghdr *nlh = nlmsg_hdr(n); + struct genlmsghdr *genlhdr = genlmsg_hdr(nlh); + struct nlattr *attrs[THERMAL_GENL_ATTR_MAX + 1]; + int ret; + struct perf_cap perf_cap; + + ret = genlmsg_parse(nlh, 0, attrs, THERMAL_GENL_ATTR_MAX, NULL); + + debug_printf("Received event %d parse_rer:%d\n", genlhdr->cmd, ret); + if (genlhdr->cmd == THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE) { + struct nlattr *cap; + int j, index = 0; + + debug_printf("THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE\n"); + nla_for_each_nested(cap, attrs[THERMAL_GENL_ATTR_CPU_CAPABILITY], j) { + switch (index) { + case 0: + perf_cap.cpu = nla_get_u32(cap); + break; + case 1: + perf_cap.perf = nla_get_u32(cap); + break; + case 2: + perf_cap.eff = nla_get_u32(cap); + break; + default: + break; + } + ++index; + if (index == 3) { + index = 0; + process_hfi_event(&perf_cap); + } + } + } + + return 0; +} + +static int _hfi_exit; + +static int check_hf_suport(void) +{ + unsigned int eax = 0, ebx = 0, ecx = 0, edx = 0; + + __cpuid(6, eax, ebx, ecx, edx); + if (eax & BIT(19)) + return 1; + + return 0; +} + +int hfi_main(void) +{ + struct nl_sock *sock; + struct nl_cb *cb; + int err = 0; + int mcast_id; + int no_block = 0; + + if (!check_hf_suport()) { + fprintf(stderr, "CPU Doesn't support HFI\n"); + return -1; + } + + sock = nl_socket_alloc(); + if (!sock) { + fprintf(stderr, "nl_socket_alloc failed\n"); + return -1; + } + + if (genl_connect(sock)) { + fprintf(stderr, "genl_connect(sk_event) failed\n"); + goto free_sock; + } + + drv.nl_handle = sock; + drv.nl_cb = cb = nl_cb_alloc(NL_CB_DEFAULT); + if (drv.nl_cb == NULL) { + printf("Failed to allocate netlink callbacks"); + goto free_sock; + } + + mcast_id = nl_get_multicast_id(&drv, THERMAL_GENL_FAMILY_NAME, + THERMAL_GENL_EVENT_GROUP_NAME); + if (mcast_id < 0) { + fprintf(stderr, "nl_get_multicast_id failed\n"); + goto free_sock; + } + + if (nl_socket_add_membership(sock, mcast_id)) { + fprintf(stderr, "nl_socket_add_membership failed"); + goto free_sock; + } + + nl_cb_set(cb, NL_CB_SEQ_CHECK, NL_CB_CUSTOM, seq_check_handler, 0); + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, handle_event, NULL); + + if (no_block) + nl_socket_set_nonblocking(sock); + + debug_printf("hfi is initialized\n"); + + while (!_hfi_exit && !err) { + err = nl_recvmsgs(sock, cb); + debug_printf("nl_recv_message err:%d\n", err); + } + + return 0; + + /* Netlink library doesn't have calls to dealloc cb or disconnect */ +free_sock: + nl_socket_free(sock); + + return -1; +} + +void hfi_exit(void) +{ + _hfi_exit = 1; +} diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c index efe72fa48224..060390e88e37 100644 --- a/tools/power/x86/intel-speed-select/isst-config.c +++ b/tools/power/x86/intel-speed-select/isst-config.c @@ -15,7 +15,8 @@ struct process_cmd_struct { int arg; }; -static const char *version_str = "v1.11"; +static const char *version_str = "v1.12"; + static const int supported_api_ver = 1; static struct isst_if_platform_info isst_platform_info; static char *progname; @@ -368,7 +369,7 @@ int get_topo_max_cpus(void) return topo_max_cpus; } -static void set_cpu_online_offline(int cpu, int state) +void set_cpu_online_offline(int cpu, int state) { char buffer[128]; int fd, ret; @@ -409,12 +410,10 @@ static void force_all_cpus_online(void) unlink("/var/run/isst_cpu_topology.dat"); } -#define MAX_PACKAGE_COUNT 8 -#define MAX_DIE_PER_PACKAGE 2 -static void for_each_online_package_in_set(void (*callback)(int, void *, void *, - void *, void *), - void *arg1, void *arg2, void *arg3, - void *arg4) +void for_each_online_package_in_set(void (*callback)(int, void *, void *, + void *, void *), + void *arg1, void *arg2, void *arg3, + void *arg4) { int max_packages[MAX_PACKAGE_COUNT * MAX_PACKAGE_COUNT]; int pkg_index = 0, i; @@ -2803,7 +2802,9 @@ static void usage(void) printf("\t[-p|--pause] : Delay between two mail box commands in milliseconds\n"); printf("\t[-r|--retry] : Retry count for mail box commands on failure, default 3\n"); printf("\t[-v|--version] : Print version\n"); - + printf("\t[-b|--oob : Start a daemon to process HFI events for perf profile change from Out of Band agent.\n"); + printf("\t[-n|--no-daemon : Don't run as daemon. By default --oob will turn on daemon mode\n"); + printf("\t[-w|--delay : Delay for reading config level state change in OOB poll mode.\n"); printf("\nResult format\n"); printf("\tResult display uses a common format for each command:\n"); printf("\tResults are formatted in text/JSON with\n"); @@ -2837,6 +2838,9 @@ static void cmdline(int argc, char **argv) int opt, force_cpus_online = 0; int option_index = 0; int ret; + int oob_mode = 0; + int poll_interval = -1; + int no_daemon = 0; static struct option long_options[] = { { "all-cpus-online", no_argument, 0, 'a' }, @@ -2849,6 +2853,9 @@ static void cmdline(int argc, char **argv) { "out", required_argument, 0, 'o' }, { "retry", required_argument, 0, 'r' }, { "version", no_argument, 0, 'v' }, + { "oob", no_argument, 0, 'b' }, + { "no-daemon", no_argument, 0, 'n' }, + { "poll-interval", required_argument, 0, 'w' }, { 0, 0, 0, 0 } }; @@ -2875,7 +2882,7 @@ static void cmdline(int argc, char **argv) } progname = argv[0]; - while ((opt = getopt_long_only(argc, argv, "+c:df:hio:va", long_options, + while ((opt = getopt_long_only(argc, argv, "+c:df:hio:vabw:n", long_options, &option_index)) != -1) { switch (opt) { case 'a': @@ -2920,12 +2927,26 @@ static void cmdline(int argc, char **argv) case 'v': print_version(); break; + case 'b': + oob_mode = 1; + break; + case 'n': + no_daemon = 1; + break; + case 'w': + ret = strtol(optarg, &ptr, 10); + if (!ret) { + fprintf(stderr, "Invalid poll interval count\n"); + exit(0); + } + poll_interval = ret; + break; default: usage(); } } - if (optind > (argc - 2)) { + if (optind > (argc - 2) && !oob_mode) { usage(); exit(0); } @@ -2936,6 +2957,17 @@ static void cmdline(int argc, char **argv) set_cpu_present_cpu_mask(); set_cpu_target_cpu_mask(); + if (oob_mode) { + create_cpu_map(); + if (debug_flag) + fprintf(stderr, "OOB mode is enabled in debug mode\n"); + + ret = isst_daemon(debug_flag, poll_interval, no_daemon); + if (ret) + fprintf(stderr, "OOB mode enable failed\n"); + goto out; + } + if (!is_clx_n_platform()) { ret = isst_fill_platform_info(); if (ret) diff --git a/tools/power/x86/intel-speed-select/isst-daemon.c b/tools/power/x86/intel-speed-select/isst-daemon.c new file mode 100644 index 000000000000..dd372924bc82 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-daemon.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Allow speed select to daemonize + * Copyright (c) 2022 Intel Corporation. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/file.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <errno.h> +#include <getopt.h> +#include <signal.h> +#include <time.h> + +#include "isst.h" + +static int per_package_levels_info[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; +static time_t per_package_levels_tm[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; + +static void init_levels(void) +{ + int i, j; + + for (i = 0; i < MAX_PACKAGE_COUNT; ++i) + for (j = 0; j < MAX_DIE_PER_PACKAGE; ++j) + per_package_levels_info[i][j] = -1; +} + +void process_level_change(int cpu) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + int pkg_id = get_physical_package_id(cpu); + int die_id = get_physical_die_id(cpu); + struct isst_pkg_ctdp pkg_dev; + time_t tm; + int ret; + + if (pkg_id >= MAX_PACKAGE_COUNT || die_id > MAX_DIE_PER_PACKAGE) { + debug_printf("Invalid package/die info for cpu:%d\n", cpu); + return; + } + + tm = time(NULL); + if (tm - per_package_levels_tm[pkg_id][die_id] < 2 ) + return; + + per_package_levels_tm[pkg_id][die_id] = tm; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + debug_printf("Can't get tdp levels for cpu:%d\n", cpu); + return; + } + + debug_printf("Get Config level %d pkg:%d die:%d current_level:%d \n", cpu, + pkg_id, die_id, pkg_dev.current_level); + + if (pkg_dev.locked) { + debug_printf("config TDP s locked \n"); + return; + } + + if (per_package_levels_info[pkg_id][die_id] == pkg_dev.current_level) + return; + + debug_printf("**Config level change for cpu:%d pkg:%d die:%d from %d to %d\n", + cpu, pkg_id, die_id, per_package_levels_info[pkg_id][die_id], + pkg_dev.current_level); + + per_package_levels_info[pkg_id][die_id] = pkg_dev.current_level; + + ctdp_level.core_cpumask_size = + alloc_cpu_set(&ctdp_level.core_cpumask); + ret = isst_get_coremask_info(cpu, pkg_dev.current_level, &ctdp_level); + if (ret) { + free_cpu_set(ctdp_level.core_cpumask); + debug_printf("Can't get core_mask:%d\n", cpu); + return; + } + + if (ctdp_level.cpu_count) { + int i, max_cpus = get_topo_max_cpus(); + for (i = 0; i < max_cpus; ++i) { + if (pkg_id != get_physical_package_id(i) || die_id != get_physical_die_id(i)) + continue; + if (CPU_ISSET_S(i, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask)) { + fprintf(stderr, "online cpu %d\n", i); + set_cpu_online_offline(i, 1); + } else { + fprintf(stderr, "offline cpu %d\n", i); + set_cpu_online_offline(i, 0); + } + } + } + + free_cpu_set(ctdp_level.core_cpumask); +} + +static void _poll_for_config_change(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + process_level_change(cpu); +} + +static void poll_for_config_change(void) +{ + for_each_online_package_in_set(_poll_for_config_change, NULL, NULL, + NULL, NULL); +} + +static int done = 0; +static int pid_file_handle; + +static void signal_handler(int sig) +{ + switch (sig) { + case SIGINT: + case SIGTERM: + done = 1; + hfi_exit(); + exit(0); + break; + default: + break; + } +} + +static void daemonize(char *rundir, char *pidfile) +{ + int pid, sid, i; + char str[10]; + struct sigaction sig_actions; + sigset_t sig_set; + int ret; + + if (getppid() == 1) + return; + + sigemptyset(&sig_set); + sigaddset(&sig_set, SIGCHLD); + sigaddset(&sig_set, SIGTSTP); + sigaddset(&sig_set, SIGTTOU); + sigaddset(&sig_set, SIGTTIN); + sigprocmask(SIG_BLOCK, &sig_set, NULL); + + sig_actions.sa_handler = signal_handler; + sigemptyset(&sig_actions.sa_mask); + sig_actions.sa_flags = 0; + + sigaction(SIGHUP, &sig_actions, NULL); + sigaction(SIGTERM, &sig_actions, NULL); + sigaction(SIGINT, &sig_actions, NULL); + + pid = fork(); + if (pid < 0) { + /* Could not fork */ + exit(EXIT_FAILURE); + } + if (pid > 0) + exit(EXIT_SUCCESS); + + umask(027); + + sid = setsid(); + if (sid < 0) + exit(EXIT_FAILURE); + + /* close all descriptors */ + for (i = getdtablesize(); i >= 0; --i) + close(i); + + i = open("/dev/null", O_RDWR); + ret = dup(i); + if (ret == -1) + exit(EXIT_FAILURE); + + ret = dup(i); + if (ret == -1) + exit(EXIT_FAILURE); + + ret = chdir(rundir); + if (ret == -1) + exit(EXIT_FAILURE); + + pid_file_handle = open(pidfile, O_RDWR | O_CREAT, 0600); + if (pid_file_handle == -1) { + /* Couldn't open lock file */ + exit(1); + } + /* Try to lock file */ +#ifdef LOCKF_SUPPORT + if (lockf(pid_file_handle, F_TLOCK, 0) == -1) { +#else + if (flock(pid_file_handle, LOCK_EX|LOCK_NB) < 0) { +#endif + /* Couldn't get lock on lock file */ + fprintf(stderr, "Couldn't get lock file %d\n", getpid()); + exit(1); + } + snprintf(str, sizeof(str), "%d\n", getpid()); + ret = write(pid_file_handle, str, strlen(str)); + if (ret == -1) + exit(EXIT_FAILURE); + + close(i); +} + +int isst_daemon(int debug_mode, int poll_interval, int no_daemon) +{ + int ret; + + if (!no_daemon && poll_interval < 0 && !debug_mode) { + fprintf(stderr, "OOB mode is enabled and will run as daemon\n"); + daemonize((char *) "/tmp/", + (char *)"/tmp/hfi-events.pid"); + } else { + signal(SIGINT, signal_handler); + } + + init_levels(); + + if (poll_interval < 0) { + ret = hfi_main(); + if (ret) { + fprintf(stderr, "HFI initialization failed\n"); + } + fprintf(stderr, "Must specify poll-interval\n"); + return ret; + } + + debug_printf("Starting loop\n"); + while (!done) { + sleep(poll_interval); + poll_for_config_change(); + } + + return 0; +} diff --git a/tools/power/x86/intel-speed-select/isst.h b/tools/power/x86/intel-speed-select/isst.h index 1aa15d5ea57c..0796d8c6a882 100644 --- a/tools/power/x86/intel-speed-select/isst.h +++ b/tools/power/x86/intel-speed-select/isst.h @@ -76,6 +76,9 @@ #define DISP_FREQ_MULTIPLIER 100 +#define MAX_PACKAGE_COUNT 8 +#define MAX_DIE_PER_PACKAGE 2 + struct isst_clos_config { int pkg_id; int die_id; @@ -260,4 +263,14 @@ extern int is_skx_based_platform(void); extern int is_spr_platform(void); extern int is_icx_platform(void); extern void isst_trl_display_information(int cpu, FILE *outf, unsigned long long trl); + +extern void set_cpu_online_offline(int cpu, int state); +extern void for_each_online_package_in_set(void (*callback)(int, void *, void *, + void *, void *), + void *arg1, void *arg2, void *arg3, + void *arg4); +extern int isst_daemon(int debug_mode, int poll_interval, int no_daemon); +extern void process_level_change(int cpu); +extern int hfi_main(void); +extern void hfi_exit(void); #endif |