Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull rst conversion of docs from Mauro Carvalho Chehab:
 "As agreed with Jon, I'm sending this big series directly to you, c/c
  him, as this series required a special care, in order to avoid
  conflicts with other trees"

* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
  docs: kbuild: fix build with pdf and fix some minor issues
  docs: block: fix pdf output
  docs: arm: fix a breakage with pdf output
  docs: don't use nested tables
  docs: gpio: add sysfs interface to the admin-guide
  docs: locking: add it to the main index
  docs: add some directories to the main documentation index
  docs: add SPDX tags to new index files
  docs: add a memory-devices subdir to driver-api
  docs: phy: place documentation under driver-api
  docs: serial: move it to the driver-api
  docs: driver-api: add remaining converted dirs to it
  docs: driver-api: add xilinx driver API documentation
  docs: driver-api: add a series of orphaned documents
  docs: admin-guide: add a series of orphaned documents
  docs: cgroup-v1: add it to the admin-guide book
  docs: aoe: add it to the driver-api book
  docs: add some documentation dirs to the driver-api book
  docs: driver-model: move it to the driver-api book
  docs: lp855x-driver.rst: add it to the driver-api book
  ...

559 files changed, 10527 insertions, 7593 deletions

diff --git a/CREDITS b/CREDITS
index beac0c81d081..401c5092bbf9 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3120,7 +3120,7 @@ S: France
 N: Rik van Riel
 E: riel@redhat.com
 W: http://www.surriel.com/
-D: Linux-MM site, Documentation/sysctl/*, swap/mm readaround
+D: Linux-MM site, Documentation/admin-guide/sysctl/*, swap/mm readaround
 D: kswapd fixes, random kernel hacker, rmap VM,
 D: nl.linux.org administrator, minor scheduler additions
 S: Red Hat Boston
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio
index 40d41ea1a3f5..e0d4e5e2dd90 100644
--- a/Documentation/ABI/obsolete/sysfs-gpio
+++ b/Documentation/ABI/obsolete/sysfs-gpio
@@ -11,7 +11,7 @@ Description:
   Kernel code may export it for complete or partial access.
 
   GPIOs are identified as they are inside the kernel, using integers in
-  the range 0..INT_MAX.  See Documentation/gpio for more information.
+  the range 0..INT_MAX.  See Documentation/admin-guide/gpio for more information.
 
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace
diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill
index 3ce6231f20b2..9c08c7f98ffb 100644
--- a/Documentation/ABI/removed/sysfs-class-rfkill
+++ b/Documentation/ABI/removed/sysfs-class-rfkill
@@ -1,6 +1,6 @@
 rfkill - radio frequency (RF) connector kill switch support
 
-For details to this subsystem look at Documentation/rfkill.txt.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
 What:		/sys/class/rfkill/rfkill[0-9]+/claim
 Date:		09-Jul-2007
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
index 80151a409d67..5b154f922643 100644
--- a/Documentation/ABI/stable/sysfs-class-rfkill
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -1,6 +1,6 @@
 rfkill - radio frequency (RF) connector kill switch support
 
-For details to this subsystem look at Documentation/rfkill.txt.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
 For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
 Documentation/ABI/removed/sysfs-class-rfkill.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index f7ce68fbd4b9..df8413cf1468 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -61,7 +61,7 @@ Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
 Description:
 		The node's hit/miss statistics, in units of pages.
-		See Documentation/numastat.txt
+		See Documentation/admin-guide/numastat.rst
 
 What:		/sys/devices/system/node/nodeX/distance
 Date:		October 2002
diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats
index abac31d216de..2c44b4f1b060 100644
--- a/Documentation/ABI/testing/procfs-diskstats
+++ b/Documentation/ABI/testing/procfs-diskstats
@@ -29,4 +29,4 @@ Description:
 		17 - sectors discarded
 		18 - time spent discarding
 
-		For more details refer to Documentation/iostats.txt
+		For more details refer to Documentation/admin-guide/iostats.rst
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index dfad7427817c..f8c7c7126bb1 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -15,7 +15,7 @@ Description:
 		 9 - I/Os currently in progress
 		10 - time spent doing I/Os (ms)
 		11 - weighted time spent doing I/Os (ms)
-		For more details refer Documentation/iostats.txt
+		For more details refer Documentation/admin-guide/iostats.rst
 
 
 What:		/sys/block/<disk>/<part>/stat
diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
index 82ef6eab042d..17f2bc7dd261 100644
--- a/Documentation/ABI/testing/sysfs-block-device
+++ b/Documentation/ABI/testing/sysfs-block-device
@@ -45,7 +45,7 @@ Description:
 		- Values below -2 are rejected with -EINVAL
 
 		For more information, see
-		Documentation/laptops/disk-shock-protection.txt
+		Documentation/admin-guide/laptops/disk-shock-protection.rst
 
 
 What:		/sys/block/*/device/ncq_prio_enable
diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec
index 48cb4c15e430..76c7a661a595 100644
--- a/Documentation/ABI/testing/sysfs-class-switchtec
+++ b/Documentation/ABI/testing/sysfs-class-switchtec
@@ -1,6 +1,6 @@
 switchtec - Microsemi Switchtec PCI Switch Management Endpoint
 
-For details on this subsystem look at Documentation/switchtec.txt.
+For details on this subsystem look at Documentation/driver-api/switchtec.rst.
 
 What: 		/sys/class/switchtec
 Date:		05-Jan-2017
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index d404603c6b52..5f7d7b14fa44 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -34,7 +34,7 @@ Description:	CPU topology files that describe kernel limits related to
 		present: cpus that have been identified as being present in
 		the system.
 
-		See Documentation/cputopology.txt for more information.
+		See Documentation/admin-guide/cputopology.rst for more information.
 
 
 What:		/sys/devices/system/cpu/probe
@@ -103,7 +103,7 @@ Description:	CPU topology files that describe a logical CPU's relationship
 		thread_siblings_list: human-readable list of cpu#'s hardware
 		threads within the same core as cpu#
 
-		See Documentation/cputopology.txt for more information.
+		See Documentation/admin-guide/cputopology.rst for more information.
 
 
 What:		/sys/devices/system/cpu/cpuidle/current_driver
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index cd9d667c3da2..8b0e8205a6a2 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -31,7 +31,7 @@ Description:
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
-		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+		The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst
 
 What:		/sys/devices/platform/asus_laptop/bluetooth
 Date:		January 2007
diff --git a/Documentation/logo.txt b/Documentation/COPYING-logo
index 296f0f7f67eb..296f0f7f67eb 100644
--- a/Documentation/logo.txt
+++ b/Documentation/COPYING-logo
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index cb712a02f59f..358d495456d1 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -212,7 +212,7 @@ The standard 64-bit addressing device would do something like this::
 
 If the device only supports 32-bit addressing for descriptors in the
 coherent allocations, but supports full 64-bits for streaming mappings
-it would look like this:
+it would look like this::
 
 	if (dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		dev_warn(dev, "mydev: No suitable DMA available\n");
diff --git a/Documentation/accounting/cgroupstats.txt b/Documentation/accounting/cgroupstats.rst
index d16a9849e60e..b9afc48f4ea2 100644
--- a/Documentation/accounting/cgroupstats.txt
+++ b/Documentation/accounting/cgroupstats.rst
@@ -1,3 +1,7 @@
+==================
+Control Groupstats
+==================
+
 Control Groupstats is inspired by the discussion at
 http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as
 suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263.
@@ -19,9 +23,9 @@ about tasks blocked on I/O. If CONFIG_TASK_DELAY_ACCT is disabled, this
 information will not be available.
 
 To extract cgroup statistics a utility very similar to getdelays.c
-has been developed, the sample output of the utility is shown below
+has been developed, the sample output of the utility is shown below::
 
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
-sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
-sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
+  sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
+  sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.rst
index 042ea59b5853..7cc7f5852da0 100644
--- a/Documentation/accounting/delay-accounting.txt
+++ b/Documentation/accounting/delay-accounting.rst
@@ -1,5 +1,6 @@
+================
 Delay accounting
-----------------
+================
 
 Tasks encounter delays in execution when they wait
 for some kernel resource to become available e.g. a
@@ -39,7 +40,9 @@ in detail in a separate document in this directory. Taskstats returns a
 generic data structure to userspace corresponding to per-pid and per-tgid
 statistics. The delay accounting functionality populates specific fields of
 this structure. See
+
      include/linux/taskstats.h
+
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
 delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
@@ -61,13 +64,16 @@ also serves as an example of using the taskstats interface.
 Usage
 -----
 
-Compile the kernel with
+Compile the kernel with::
+
 	CONFIG_TASK_DELAY_ACCT=y
 	CONFIG_TASKSTATS=y
 
 Delay accounting is enabled by default at boot up.
-To disable, add
+To disable, add::
+
    nodelayacct
+
 to the kernel boot options. The rest of the instructions
 below assume this has not been done.
 
@@ -78,40 +84,43 @@ The utility also allows a given command to be
 executed and the corresponding delays to be
 seen.
 
-General format of the getdelays command
+General format of the getdelays command::
 
-getdelays [-t tgid] [-p pid] [-c cmd...]
+	getdelays [-t tgid] [-p pid] [-c cmd...]
 
 
-Get delays, since system boot, for pid 10
-# ./getdelays -p 10
-(output similar to next case)
+Get delays, since system boot, for pid 10::
 
-Get sum of delays, since system boot, for all pids with tgid 5
-# ./getdelays -t 5
+	# ./getdelays -p 10
+	(output similar to next case)
 
+Get sum of delays, since system boot, for all pids with tgid 5::
 
-CPU	count	real total	virtual total	delay total
-	7876	92005750	100000000	24001500
-IO	count	delay total
-	0	0
-SWAP	count	delay total
-	0	0
-RECLAIM	count	delay total
-	0	0
+	# ./getdelays -t 5
+
+
+	CPU	count	real total	virtual total	delay total
+		7876	92005750	100000000	24001500
+	IO	count	delay total
+		0	0
+	SWAP	count	delay total
+		0	0
+	RECLAIM	count	delay total
+		0	0
+
+Get delays seen in executing a given simple command::
 
-Get delays seen in executing a given simple command
-# ./getdelays -c ls /
+  # ./getdelays -c ls /
 
-bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
-boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+  bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
+  boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
 
 
-CPU	count	real total	virtual total	delay total
+  CPU	count	real total	virtual total	delay total
 	6	4000250		4000000		0
-IO	count	delay total
+  IO	count	delay total
 	0	0
-SWAP	count	delay total
+  SWAP	count	delay total
 	0	0
-RECLAIM	count	delay total
+  RECLAIM	count	delay total
 	0	0
diff --git a/Documentation/accounting/index.rst b/Documentation/accounting/index.rst
new file mode 100644
index 000000000000..9369d8bf32be
--- /dev/null
+++ b/Documentation/accounting/index.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Accounting
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   cgroupstats
+   delay-accounting
+   psi
+   taskstats
+   taskstats-struct
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.rst
index 5cbe5659e3b7..621111ce5740 100644
--- a/Documentation/accounting/psi.txt
+++ b/Documentation/accounting/psi.rst
@@ -35,14 +35,14 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such:
+The format for CPU is as such::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
-and for memory and IO:
+and for memory and IO::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
 The "some" line indicates the share of time in which at least some
 tasks are stalled on a given resource.
@@ -77,9 +77,9 @@ To register a trigger user has to open psi interface file under
 /proc/pressure/ representing the resource to be monitored and write the
 desired threshold and time window. The open file descriptor should be
 used to wait for trigger events using select(), poll() or epoll().
-The following format is used:
+The following format is used::
 
-<some|full> <stall amount in us> <time window in us>
+	<some|full> <stall amount in us> <time window in us>
 
 For example writing "some 150000 1000000" into /proc/pressure/memory
 would add 150ms threshold for partial memory stall measured within
@@ -115,18 +115,20 @@ trigger  is closed.
 Userspace monitor usage example
 ===============================
 
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <poll.h>
-#include <string.h>
-#include <unistd.h>
-
-/*
- * Monitor memory partial stall with 1s tracking window size
- * and 150ms threshold.
- */
-int main() {
+::
+
+  #include <errno.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <poll.h>
+  #include <string.h>
+  #include <unistd.h>
+
+  /*
+   * Monitor memory partial stall with 1s tracking window size
+   * and 150ms threshold.
+   */
+  int main() {
 	const char trig[] = "some 150000 1000000";
 	struct pollfd fds;
 	int n;
@@ -165,7 +167,7 @@ int main() {
 	}
 
 	return 0;
-}
+  }
 
 Cgroup2 interface
 =================
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.rst
index e7512c061c15..ca90fd489c9a 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.rst
@@ -1,5 +1,6 @@
+====================
 The struct taskstats
---------------------
+====================
 
 This document contains an explanation of the struct taskstats fields.
 
@@ -10,16 +11,24 @@ There are three different groups of fields in the struct taskstats:
     the common fields and basic accounting fields are collected for
     delivery at do_exit() of a task.
 2) Delay accounting fields
-    These fields are placed between
-    /* Delay accounting fields start */
-    and
-    /* Delay accounting fields end */
+    These fields are placed between::
+
+	/* Delay accounting fields start */
+
+    and::
+
+	/* Delay accounting fields end */
+
     Their values are collected if CONFIG_TASK_DELAY_ACCT is set.
 3) Extended accounting fields
-    These fields are placed between
-    /* Extended accounting fields start */
-    and
-    /* Extended accounting fields end */
+    These fields are placed between::
+
+	/* Extended accounting fields start */
+
+    and::
+
+	/* Extended accounting fields end */
+
     Their values are collected if CONFIG_TASK_XACCT is set.
 
 4) Per-task and per-thread context switch count statistics
@@ -31,31 +40,33 @@ There are three different groups of fields in the struct taskstats:
 Future extension should add fields to the end of the taskstats struct, and
 should not change the relative position of each field within the struct.
 
+::
 
-struct taskstats {
+  struct taskstats {
+
+1) Common and basic accounting fields::
 
-1) Common and basic accounting fields:
 	/* The version number of this struct. This field is always set to
 	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
 	 * Each time the struct is changed, the value should be incremented.
 	 */
 	__u16	version;
 
-  	/* The exit code of a task. */
+	/* The exit code of a task. */
 	__u32	ac_exitcode;		/* Exit status */
 
-  	/* The accounting flags of a task as defined in <linux/acct.h>
+	/* The accounting flags of a task as defined in <linux/acct.h>
 	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
 	 */
 	__u8	ac_flag;		/* Record flags */
 
-  	/* The value of task_nice() of a task. */
+	/* The value of task_nice() of a task. */
 	__u8	ac_nice;		/* task_nice */
 
-  	/* The name of the command that started this task. */
+	/* The name of the command that started this task. */
 	char	ac_comm[TS_COMM_LEN];	/* Command name */
 
-  	/* The scheduling discipline as set in task->policy field. */
+	/* The scheduling discipline as set in task->policy field. */
 	__u8	ac_sched;		/* Scheduling discipline */
 
 	__u8	ac_pad[3];
@@ -64,26 +75,27 @@ struct taskstats {
 	__u32	ac_pid;			/* Process ID */
 	__u32	ac_ppid;		/* Parent process ID */
 
-  	/* The time when a task begins, in [secs] since 1970. */
+	/* The time when a task begins, in [secs] since 1970. */
 	__u32	ac_btime;		/* Begin time [sec since 1970] */
 
-  	/* The elapsed time of a task, in [usec]. */
+	/* The elapsed time of a task, in [usec]. */
 	__u64	ac_etime;		/* Elapsed time [usec] */
 
-  	/* The user CPU time of a task, in [usec]. */
+	/* The user CPU time of a task, in [usec]. */
 	__u64	ac_utime;		/* User CPU time [usec] */
 
-  	/* The system CPU time of a task, in [usec]. */
+	/* The system CPU time of a task, in [usec]. */
 	__u64	ac_stime;		/* System CPU time [usec] */
 
-  	/* The minor page fault count of a task, as set in task->min_flt. */
+	/* The minor page fault count of a task, as set in task->min_flt. */
 	__u64	ac_minflt;		/* Minor Page Fault Count */
 
 	/* The major page fault count of a task, as set in task->maj_flt. */
 	__u64	ac_majflt;		/* Major Page Fault Count */
 
 
-2) Delay accounting fields:
+2) Delay accounting fields::
+
 	/* Delay accounting fields start
 	 *
 	 * All values, until the comment "Delay accounting fields end" are
@@ -134,7 +146,8 @@ struct taskstats {
 	/* version 1 ends here */
 
 
-3) Extended accounting fields
+3) Extended accounting fields::
+
 	/* Extended accounting fields start */
 
 	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
@@ -145,15 +158,15 @@ struct taskstats {
 	 */
 	__u64	coremem;		/* accumulated RSS usage in MB-usec */
 
-  	/* Accumulated virtual memory usage in duration of a task.
+	/* Accumulated virtual memory usage in duration of a task.
 	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
 	 */
 	__u64	virtmem;		/* accumulated VM usage in MB-usec */
 
-  	/* High watermark of RSS usage in duration of a task, in KBytes. */
+	/* High watermark of RSS usage in duration of a task, in KBytes. */
 	__u64	hiwater_rss;		/* High-watermark of RSS usage */
 
-  	/* High watermark of VM  usage in duration of a task, in KBytes. */
+	/* High watermark of VM  usage in duration of a task, in KBytes. */
 	__u64	hiwater_vm;		/* High-water virtual memory usage */
 
 	/* The following four fields are I/O statistics of a task. */
@@ -164,17 +177,23 @@ struct taskstats {
 
 	/* Extended accounting fields end */
 
-4) Per-task and per-thread statistics
+4) Per-task and per-thread statistics::
+
 	__u64	nvcsw;			/* Context voluntary switch counter */
 	__u64	nivcsw;			/* Context involuntary switch counter */
 
-5) Time accounting for SMT machines
+5) Time accounting for SMT machines::
+
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
 
-6) Extended delay accounting fields for memory reclaim
+6) Extended delay accounting fields for memory reclaim::
+
 	/* Delay waiting for memory reclaim */
 	__u64	freepages_count;
 	__u64	freepages_delay_total;
-}
+
+::
+
+  }
diff --git a/Documentation/accounting/taskstats.txt b/Documentation/accounting/taskstats.rst
index ff06b738bb88..2a28b7f55c10 100644
--- a/Documentation/accounting/taskstats.txt
+++ b/Documentation/accounting/taskstats.rst
@@ -1,5 +1,6 @@
+=============================
 Per-task statistics interface
------------------------------
+=============================
 
 
 Taskstats is a netlink-based interface for sending per-task and
@@ -65,7 +66,7 @@ taskstats.h file.
 
 The data exchanged between user and kernel space is a netlink message belonging
 to the NETLINK_GENERIC family and using the netlink attributes interface.
-The messages are in the format
+The messages are in the format::
 
     +----------+- - -+-------------+-------------------+
     | nlmsghdr | Pad |  genlmsghdr | taskstats payload |
@@ -167,15 +168,13 @@ extended and the number of cpus grows large.
 To avoid losing statistics, userspace should do one or more of the following:
 
 - increase the receive buffer sizes for the netlink sockets opened by
-listeners to receive exit data.
+  listeners to receive exit data.
 
 - create more listeners and reduce the number of cpus being listened to by
-each listener. In the extreme case, there could be one listener for each cpu.
-Users may also consider setting the cpu affinity of the listener to the subset
-of cpus to which it listens, especially if they are listening to just one cpu.
+  each listener. In the extreme case, there could be one listener for each cpu.
+  Users may also consider setting the cpu affinity of the listener to the subset
+  of cpus to which it listens, especially if they are listening to just one cpu.
 
 Despite these measures, if the userspace receives ENOBUFS error messages
 indicated overflow of receive buffers, it should take measures to handle the
 loss of data.
-
-----
diff --git a/Documentation/aoe/aoe.rst b/Documentation/admin-guide/aoe/aoe.rst
index 58747ecec71d..a05e751363a0 100644
--- a/Documentation/aoe/aoe.rst
+++ b/Documentation/admin-guide/aoe/aoe.rst
@@ -20,7 +20,7 @@ driver.  The aoetools are on sourceforge.
 
   http://aoetools.sourceforge.net/
 
-The scripts in this Documentation/aoe directory are intended to
+The scripts in this Documentation/admin-guide/aoe directory are intended to
 document the use of the driver and are not necessary if you install
 the aoetools.
 
@@ -86,7 +86,7 @@ Using sysfs
   a convenient way.  Users with aoetools should use the aoe-stat
   command::
 
-    root@makki root# sh Documentation/aoe/status.sh
+    root@makki root# sh Documentation/admin-guide/aoe/status.sh
        e10.0            eth3              up
        e10.1            eth3              up
        e10.2            eth3              up
diff --git a/Documentation/aoe/autoload.sh b/Documentation/admin-guide/aoe/autoload.sh
index 815dff4691c9..815dff4691c9 100644
--- a/Documentation/aoe/autoload.sh
+++ b/Documentation/admin-guide/aoe/autoload.sh
diff --git a/Documentation/aoe/examples.rst b/Documentation/admin-guide/aoe/examples.rst
index 91f3198e52c1..91f3198e52c1 100644
--- a/Documentation/aoe/examples.rst
+++ b/Documentation/admin-guide/aoe/examples.rst
diff --git a/Documentation/aoe/index.rst b/Documentation/admin-guide/aoe/index.rst
index 4394b9b7913c..d71c5df15922 100644
--- a/Documentation/aoe/index.rst
+++ b/Documentation/admin-guide/aoe/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 =======================
 ATA over Ethernet (AoE)
 =======================
diff --git a/Documentation/aoe/status.sh b/Documentation/admin-guide/aoe/status.sh
index eeec7baae57a..eeec7baae57a 100644
--- a/Documentation/aoe/status.sh
+++ b/Documentation/admin-guide/aoe/status.sh
diff --git a/Documentation/aoe/todo.rst b/Documentation/admin-guide/aoe/todo.rst
index dea8db5a33e1..dea8db5a33e1 100644
--- a/Documentation/aoe/todo.rst
+++ b/Documentation/admin-guide/aoe/todo.rst
diff --git a/Documentation/aoe/udev-install.sh b/Documentation/admin-guide/aoe/udev-install.sh
index 15e86f58c036..15e86f58c036 100644
--- a/Documentation/aoe/udev-install.sh
+++ b/Documentation/admin-guide/aoe/udev-install.sh
diff --git a/Documentation/aoe/udev.txt b/Documentation/admin-guide/aoe/udev.txt
index 54feda5a0772..5fb756466bc7 100644
--- a/Documentation/aoe/udev.txt
+++ b/Documentation/admin-guide/aoe/udev.txt
@@ -11,7 +11,7 @@
 #   udev_rules="/etc/udev/rules.d/"
 #   bash# ls /etc/udev/rules.d/
 #   10-wacom.rules  50-udev.rules
-#   bash# cp /path/to/linux/Documentation/aoe/udev.txt \
+#   bash# cp /path/to/linux/Documentation/admin-guide/aoe/udev.txt \
 #           /etc/udev/rules.d/60-aoe.rules
 #  
 
diff --git a/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg b/Documentation/admin-guide/blockdev/drbd/DRBD-8.3-data-packets.svg
index f87cfa0dc2fb..f87cfa0dc2fb 100644
--- a/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg
+++ b/Documentation/admin-guide/blockdev/drbd/DRBD-8.3-data-packets.svg
diff --git a/Documentation/blockdev/drbd/DRBD-data-packets.svg b/Documentation/admin-guide/blockdev/drbd/DRBD-data-packets.svg
index 48a1e2165fec..48a1e2165fec 100644
--- a/Documentation/blockdev/drbd/DRBD-data-packets.svg
+++ b/Documentation/admin-guide/blockdev/drbd/DRBD-data-packets.svg
diff --git a/Documentation/blockdev/drbd/conn-states-8.dot b/Documentation/admin-guide/blockdev/drbd/conn-states-8.dot
index 025e8cf5e64a..025e8cf5e64a 100644
--- a/Documentation/blockdev/drbd/conn-states-8.dot
+++ b/Documentation/admin-guide/blockdev/drbd/conn-states-8.dot
diff --git a/Documentation/blockdev/drbd/data-structure-v9.txt b/Documentation/admin-guide/blockdev/drbd/data-structure-v9.rst
index 1e52a0e32624..66036b901644 100644
--- a/Documentation/blockdev/drbd/data-structure-v9.txt
+++ b/Documentation/admin-guide/blockdev/drbd/data-structure-v9.rst
@@ -1,3 +1,7 @@
+================================
+kernel data structure for DRBD-9
+================================
+
 This describes the in kernel data structure for DRBD-9. Starting with
 Linux v3.14 we are reorganizing DRBD to use this data structure.
 
@@ -10,7 +14,7 @@ device is represented by a block device locally.
 
 The DRBD objects are interconnected to form a matrix as depicted below; a
 drbd_peer_device object sits at each intersection between a drbd_device and a
-drbd_connection:
+drbd_connection::
 
   /--------------+---------------+.....+---------------\
   |   resource   |    device     |     |    device     |
diff --git a/Documentation/blockdev/drbd/disk-states-8.dot b/Documentation/admin-guide/blockdev/drbd/disk-states-8.dot
index d06cfb46fb98..d06cfb46fb98 100644
--- a/Documentation/blockdev/drbd/disk-states-8.dot
+++ b/Documentation/admin-guide/blockdev/drbd/disk-states-8.dot
diff --git a/Documentation/blockdev/drbd/drbd-connection-state-overview.dot b/Documentation/admin-guide/blockdev/drbd/drbd-connection-state-overview.dot
index 6d9cf0a7b11d..6d9cf0a7b11d 100644
--- a/Documentation/blockdev/drbd/drbd-connection-state-overview.dot
+++ b/Documentation/admin-guide/blockdev/drbd/drbd-connection-state-overview.dot
diff --git a/Documentation/admin-guide/blockdev/drbd/figures.rst b/Documentation/admin-guide/blockdev/drbd/figures.rst
new file mode 100644
index 000000000000..bd9a4901fe46
--- /dev/null
+++ b/Documentation/admin-guide/blockdev/drbd/figures.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. The here included files are intended to help understand the implementation
+
+Data flows that Relate some functions, and write packets
+========================================================
+
+.. kernel-figure:: DRBD-8.3-data-packets.svg
+    :alt:   DRBD-8.3-data-packets.svg
+    :align: center
+
+.. kernel-figure:: DRBD-data-packets.svg
+    :alt:   DRBD-data-packets.svg
+    :align: center
+
+
+Sub graphs of DRBD's state transitions
+======================================
+
+.. kernel-figure:: conn-states-8.dot
+    :alt:   conn-states-8.dot
+    :align: center
+
+.. kernel-figure:: disk-states-8.dot
+    :alt:   disk-states-8.dot
+    :align: center
+
+.. kernel-figure:: node-states-8.dot
+    :alt:   node-states-8.dot
+    :align: center
diff --git a/Documentation/blockdev/drbd/README.txt b/Documentation/admin-guide/blockdev/drbd/index.rst
index 627b0a1bf35e..68ecd5c113e9 100644
--- a/Documentation/blockdev/drbd/README.txt
+++ b/Documentation/admin-guide/blockdev/drbd/index.rst
@@ -1,4 +1,9 @@
+==========================================
+Distributed Replicated Block Device - DRBD
+==========================================
+
 Description
+===========
 
   DRBD is a shared-nothing, synchronously replicated block device. It
   is designed to serve as a building block for high availability
@@ -7,10 +12,8 @@ Description
 
   Please visit http://www.drbd.org to find out more.
 
-The here included files are intended to help understand the implementation
-
-DRBD-8.3-data-packets.svg, DRBD-data-packets.svg  
-  relates some functions, and write packets.
+.. toctree::
+   :maxdepth: 1
 
-conn-states-8.dot, disk-states-8.dot, node-states-8.dot
-  The sub graphs of DRBD's state transitions
+   data-structure-v9
+   figures
diff --git a/Documentation/blockdev/drbd/node-states-8.dot b/Documentation/admin-guide/blockdev/drbd/node-states-8.dot
index 4a2b00c23547..bfa54e1f8016 100644
--- a/Documentation/blockdev/drbd/node-states-8.dot
+++ b/Documentation/admin-guide/blockdev/drbd/node-states-8.dot
@@ -11,4 +11,3 @@ digraph peer_states {
 	Unknown   -> Primary           [ label = "connected" ]
 	Unknown   -> Secondary         [ label = "connected" ]
 }
-
diff --git a/Documentation/blockdev/floppy.txt b/Documentation/admin-guide/blockdev/floppy.rst
index e2240f5ab64d..4a8f31cf4139 100644
--- a/Documentation/blockdev/floppy.txt
+++ b/Documentation/admin-guide/blockdev/floppy.rst
@@ -1,35 +1,37 @@
-This file describes the floppy driver.
+=============
+Floppy Driver
+=============
 
 FAQ list:
 =========
 
- A FAQ list may be found in the fdutils package (see below), and also
+A FAQ list may be found in the fdutils package (see below), and also
 at <http://fdutils.linux.lu/faq.html>.
 
 
 LILO configuration options (Thinkpad users, read this)
 ======================================================
 
- The floppy driver is configured using the 'floppy=' option in
+The floppy driver is configured using the 'floppy=' option in
 lilo. This option can be typed at the boot prompt, or entered in the
 lilo configuration file.
 
- Example: If your kernel is called linux-2.6.9, type the following line
-at the lilo boot prompt (if you have a thinkpad):
+Example: If your kernel is called linux-2.6.9, type the following line
+at the lilo boot prompt (if you have a thinkpad)::
 
  linux-2.6.9 floppy=thinkpad
 
 You may also enter the following line in /etc/lilo.conf, in the description
-of linux-2.6.9:
+of linux-2.6.9::
 
  append = "floppy=thinkpad"
 
- Several floppy related options may be given, example:
+Several floppy related options may be given, example::
 
  linux-2.6.9 floppy=daring floppy=two_fdc
  append = "floppy=daring floppy=two_fdc"
 
- If you give options both in the lilo config file and on the boot
+If you give options both in the lilo config file and on the boot
 prompt, the option strings of both places are concatenated, the boot
 prompt options coming last. That's why there are also options to
 restore the default behavior.
@@ -38,21 +40,23 @@ restore the default behavior.
 Module configuration options
 ============================
 
- If you use the floppy driver as a module, use the following syntax:
-modprobe floppy floppy="<options>"
+If you use the floppy driver as a module, use the following syntax::
 
-Example:
- modprobe floppy floppy="omnibook messages"
+	modprobe floppy floppy="<options>"
 
- If you need certain options enabled every time you load the floppy driver,
-you can put:
+Example::
 
- options floppy floppy="omnibook messages"
+	modprobe floppy floppy="omnibook messages"
+
+If you need certain options enabled every time you load the floppy driver,
+you can put::
+
+	options floppy floppy="omnibook messages"
 
 in a configuration file in /etc/modprobe.d/.
 
 
- The floppy driver related options are:
+The floppy driver related options are:
 
  floppy=asus_pci
 	Sets the bit mask to allow only units 0 and 1. (default)
@@ -70,8 +74,7 @@ in a configuration file in /etc/modprobe.d/.
 	Tells the floppy driver that you have only one floppy controller.
 	(default)
 
- floppy=two_fdc
- floppy=<address>,two_fdc
+ floppy=two_fdc / floppy=<address>,two_fdc
 	Tells the floppy driver that you have two floppy controllers.
 	The second floppy controller is assumed to be at <address>.
 	This option is not needed if the second controller is at address
@@ -84,8 +87,7 @@ in a configuration file in /etc/modprobe.d/.
  floppy=0,thinkpad
 	Tells the floppy driver that you don't have a Thinkpad.
 
- floppy=omnibook
- floppy=nodma
+ floppy=omnibook / floppy=nodma
 	Tells the floppy driver not to use Dma for data transfers.
 	This is needed on HP Omnibooks, which don't have a workable
 	DMA channel for the floppy driver. This option is also useful
@@ -144,14 +146,16 @@ in a configuration file in /etc/modprobe.d/.
 	described in the physical CMOS), or if your BIOS uses
 	non-standard CMOS types. The CMOS types are:
 
-		0 - Use the value of the physical CMOS
-		1 - 5 1/4 DD
-		2 - 5 1/4 HD
-		3 - 3 1/2 DD
-		4 - 3 1/2 HD
-		5 - 3 1/2 ED
-		6 - 3 1/2 ED
-	       16 - unknown or not installed
+	       ==  ==================================
+		0  Use the value of the physical CMOS
+		1  5 1/4 DD
+		2  5 1/4 HD
+		3  3 1/2 DD
+		4  3 1/2 HD
+		5  3 1/2 ED
+		6  3 1/2 ED
+	       16  unknown or not installed
+	       ==  ==================================
 
 	(Note: there are two valid types for ED drives. This is because 5 was
 	initially chosen to represent floppy *tapes*, and 6 for ED drives.
@@ -162,8 +166,7 @@ in a configuration file in /etc/modprobe.d/.
 	Print a warning message when an unexpected interrupt is received.
 	(default)
 
- floppy=no_unexpected_interrupts
- floppy=L40SX
+ floppy=no_unexpected_interrupts / floppy=L40SX
 	Don't print a message when an unexpected interrupt is received. This
 	is needed on IBM L40SX laptops in certain video modes. (There seems
 	to be an interaction between video and floppy. The unexpected
@@ -199,47 +202,54 @@ in a configuration file in /etc/modprobe.d/.
 	Sets the floppy DMA channel to <nr> instead of 2.
 
  floppy=slow
-	Use PS/2 stepping rate:
-	 " PS/2 floppies have much slower step rates than regular floppies.
+	Use PS/2 stepping rate::
+
+	   PS/2 floppies have much slower step rates than regular floppies.
 	   It's been recommended that take about 1/4 of the default speed
-	   in some more extreme cases."
+	   in some more extreme cases.
 
 
 Supporting utilities and additional documentation:
 ==================================================
 
- Additional parameters of the floppy driver can be configured at
+Additional parameters of the floppy driver can be configured at
 runtime. Utilities which do this can be found in the fdutils package.
 This package also contains a new version of mtools which allows to
 access high capacity disks (up to 1992K on a high density 3 1/2 disk!).
 It also contains additional documentation about the floppy driver.
 
 The latest version can be found at fdutils homepage:
+
  http://fdutils.linux.lu
 
 The fdutils releases can be found at:
+
  http://fdutils.linux.lu/download.html
+
  http://www.tux.org/pub/knaff/fdutils/
+
  ftp://metalab.unc.edu/pub/Linux/utils/disk-management/
 
 Reporting problems about the floppy driver
 ==========================================
 
- If you have a question or a bug report about the floppy driver, mail
+If you have a question or a bug report about the floppy driver, mail
 me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use
 comp.os.linux.hardware. As the volume in these groups is rather high,
 be sure to include the word "floppy" (or "FLOPPY") in the subject
 line.  If the reported problem happens when mounting floppy disks, be
 sure to mention also the type of the filesystem in the subject line.
 
- Be sure to read the FAQ before mailing/posting any bug reports!
+Be sure to read the FAQ before mailing/posting any bug reports!
 
- Alain
+Alain
 
 Changelog
 =========
 
-10-30-2004 :	Cleanup, updating, add reference to module configuration.
+10-30-2004 :
+		Cleanup, updating, add reference to module configuration.
 		James Nelson <james4765@gmail.com>
 
-6-3-2000 :	Original Document
+6-3-2000 :
+		Original Document
diff --git a/Documentation/admin-guide/blockdev/index.rst b/Documentation/admin-guide/blockdev/index.rst
new file mode 100644
index 000000000000..b903cf152091
--- /dev/null
+++ b/Documentation/admin-guide/blockdev/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+The Linux RapidIO Subsystem
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   floppy
+   nbd
+   paride
+   ramdisk
+   zram
+
+   drbd/index
diff --git a/Documentation/blockdev/nbd.txt b/Documentation/admin-guide/blockdev/nbd.rst
index db242ea2bce8..d78dfe559dcf 100644
--- a/Documentation/blockdev/nbd.txt
+++ b/Documentation/admin-guide/blockdev/nbd.rst
@@ -1,3 +1,4 @@
+==================================
 Network Block Device (TCP version)
 ==================================
 
@@ -28,4 +29,3 @@ max_part
 
 nbds_max
 	Number of block devices that should be initialized (default: 16).
-
diff --git a/Documentation/blockdev/paride.txt b/Documentation/admin-guide/blockdev/paride.rst
index ee6717e3771d..87b4278bf314 100644
--- a/Documentation/blockdev/paride.txt
+++ b/Documentation/admin-guide/blockdev/paride.rst
@@ -1,15 +1,17 @@
-
-		Linux and parallel port IDE devices
+===================================
+Linux and parallel port IDE devices
+===================================
 
 PARIDE v1.03   (c) 1997-8  Grant Guenther <grant@torque.net>
 
 1. Introduction
+===============
 
 Owing to the simplicity and near universality of the parallel port interface
 to personal computers, many external devices such as portable hard-disk,
 CD-ROM, LS-120 and tape drives use the parallel port to connect to their
 host computer.  While some devices (notably scanners) use ad-hoc methods
-to pass commands and data through the parallel port interface, most 
+to pass commands and data through the parallel port interface, most
 external devices are actually identical to an internal model, but with
 a parallel-port adapter chip added in.  Some of the original parallel port
 adapters were little more than mechanisms for multiplexing a SCSI bus.
@@ -28,47 +30,50 @@ were to open up a parallel port CD-ROM drive, for instance, one would
 find a standard ATAPI CD-ROM drive, a power supply, and a single adapter
 that interconnected a standard PC parallel port cable and a standard
 IDE cable.  It is usually possible to exchange the CD-ROM device with
-any other device using the IDE interface. 
+any other device using the IDE interface.
 
 The document describes the support in Linux for parallel port IDE
 devices.  It does not cover parallel port SCSI devices, "ditto" tape
-drives or scanners.  Many different devices are supported by the 
+drives or scanners.  Many different devices are supported by the
 parallel port IDE subsystem, including:
 
-	MicroSolutions backpack CD-ROM
-	MicroSolutions backpack PD/CD
-	MicroSolutions backpack hard-drives
-	MicroSolutions backpack 8000t tape drive
-	SyQuest EZ-135, EZ-230 & SparQ drives
-	Avatar Shark
-	Imation Superdisk LS-120
-	Maxell Superdisk LS-120
-	FreeCom Power CD 
-	Hewlett-Packard 5GB and 8GB tape drives
-	Hewlett-Packard 7100 and 7200 CD-RW drives
+	- MicroSolutions backpack CD-ROM
+	- MicroSolutions backpack PD/CD
+	- MicroSolutions backpack hard-drives
+	- MicroSolutions backpack 8000t tape drive
+	- SyQuest EZ-135, EZ-230 & SparQ drives
+	- Avatar Shark
+	- Imation Superdisk LS-120
+	- Maxell Superdisk LS-120
+	- FreeCom Power CD
+	- Hewlett-Packard 5GB and 8GB tape drives
+	- Hewlett-Packard 7100 and 7200 CD-RW drives
 
 as well as most of the clone and no-name products on the market.
 
 To support such a wide range of devices, PARIDE, the parallel port IDE
 subsystem, is actually structured in three parts.   There is a base
 paride module which provides a registry and some common methods for
-accessing the parallel ports.  The second component is a set of 
-high-level drivers for each of the different types of supported devices: 
+accessing the parallel ports.  The second component is a set of
+high-level drivers for each of the different types of supported devices:
 
+	===	=============
 	pd	IDE disk
 	pcd	ATAPI CD-ROM
 	pf	ATAPI disk
 	pt	ATAPI tape
 	pg	ATAPI generic
+	===	=============
 
 (Currently, the pg driver is only used with CD-R drives).
 
 The high-level drivers function according to the relevant standards.
 The third component of PARIDE is a set of low-level protocol drivers
 for each of the parallel port IDE adapter chips.  Thanks to the interest
-and encouragement of Linux users from many parts of the world, 
+and encouragement of Linux users from many parts of the world,
 support is available for almost all known adapter protocols:
 
+	====    ====================================== ====
         aten    ATEN EH-100                            (HK)
         bpck    Microsolutions backpack                (US)
         comm    DataStor (old-type) "commuter" adapter (TW)
@@ -83,9 +88,11 @@ support is available for almost all known adapter protocols:
 	ktti    KT Technology PHd adapter              (SG)
         on20    OnSpec 90c20                           (US)
         on26    OnSpec 90c26                           (US)
+	====    ====================================== ====
 
 
 2. Using the PARIDE subsystem
+=============================
 
 While configuring the Linux kernel, you may choose either to build
 the PARIDE drivers into your kernel, or to build them as modules.
@@ -94,10 +101,10 @@ In either case, you will need to select "Parallel port IDE device support"
 as well as at least one of the high-level drivers and at least one
 of the parallel port communication protocols.  If you do not know
 what kind of parallel port adapter is used in your drive, you could
-begin by checking the file names and any text files on your DOS 
+begin by checking the file names and any text files on your DOS
 installation floppy.  Alternatively, you can look at the markings on
 the adapter chip itself.  That's usually sufficient to identify the
-correct device.  
+correct device.
 
 You can actually select all the protocol modules, and allow the PARIDE
 subsystem to try them all for you.
@@ -105,8 +112,9 @@ subsystem to try them all for you.
 For the "brand-name" products listed above, here are the protocol
 and high-level drivers that you would use:
 
+	================	============	======	========
 	Manufacturer		Model		Driver	Protocol
-	
+	================	============	======	========
 	MicroSolutions		CD-ROM		pcd	bpck
 	MicroSolutions		PD drive	pf	bpck
 	MicroSolutions		hard-drive	pd	bpck
@@ -119,8 +127,10 @@ and high-level drivers that you would use:
 	Hewlett-Packard		5GB Tape	pt	epat
 	Hewlett-Packard		7200e (CD)	pcd	epat
 	Hewlett-Packard		7200e (CD-R)	pg	epat
+	================	============	======	========
 
 2.1  Configuring built-in drivers
+---------------------------------
 
 We recommend that you get to know how the drivers work and how to
 configure them as loadable modules, before attempting to compile a
@@ -143,7 +153,7 @@ protocol identification number and, for some devices, the drive's
 chain ID.  While your system is booting, a number of messages are
 displayed on the console.  Like all such messages, they can be
 reviewed with the 'dmesg' command.  Among those messages will be
-some lines like:
+some lines like::
 
 	paride: bpck registered as protocol 0
 	paride: epat registered as protocol 1
@@ -158,10 +168,10 @@ the last two digits of the drive's serial number (but read MicroSolutions'
 documentation about this).
 
 As an example, let's assume that you have a MicroSolutions PD/CD drive
-with unit ID number 36 connected to the parallel port at 0x378, a SyQuest 
-EZ-135 connected to the chained port on the PD/CD drive and also an 
-Imation Superdisk connected to port 0x278.  You could give the following 
-options on your boot command:
+with unit ID number 36 connected to the parallel port at 0x378, a SyQuest
+EZ-135 connected to the chained port on the PD/CD drive and also an
+Imation Superdisk connected to port 0x278.  You could give the following
+options on your boot command::
 
 	pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
 
@@ -169,24 +179,27 @@ In the last option, pf.drive1 configures device /dev/pf1, the 0x378
 is the parallel port base address, the 0 is the protocol registration
 number and 36 is the chain ID.
 
-Please note:  while PARIDE will work both with and without the 
+Please note:  while PARIDE will work both with and without the
 PARPORT parallel port sharing system that is included by the
 "Parallel port support" option, PARPORT must be included and enabled
 if you want to use chains of devices on the same parallel port.
 
 2.2  Loading and configuring PARIDE as modules
+----------------------------------------------
 
 It is much faster and simpler to get to understand the PARIDE drivers
-if you use them as loadable kernel modules.   
+if you use them as loadable kernel modules.
 
-Note 1:  using these drivers with the "kerneld" automatic module loading
-system is not recommended for beginners, and is not documented here.  
+Note 1:
+	using these drivers with the "kerneld" automatic module loading
+	system is not recommended for beginners, and is not documented here.
 
-Note 2:  if you build PARPORT support as a loadable module, PARIDE must
-also be built as loadable modules, and PARPORT must be loaded before the
-PARIDE modules.
+Note 2:
+	if you build PARPORT support as a loadable module, PARIDE must
+	also be built as loadable modules, and PARPORT must be loaded before
+	the PARIDE modules.
 
-To use PARIDE, you must begin by 
+To use PARIDE, you must begin by::
 
 	insmod paride
 
@@ -195,8 +208,8 @@ among other tasks.
 
 Then, load as many of the protocol modules as you think you might need.
 As you load each module, it will register the protocols that it supports,
-and print a log message to your kernel log file and your console. For 
-example:
+and print a log message to your kernel log file and your console. For
+example::
 
 	# insmod epat
 	paride: epat registered as protocol 0
@@ -205,22 +218,22 @@ example:
         paride: k971 registered as protocol 2
 
 Finally, you can load high-level drivers for each kind of device that
-you have connected.  By default, each driver will autoprobe for a single 
+you have connected.  By default, each driver will autoprobe for a single
 device, but you can support up to four similar devices by giving their
 individual co-ordinates when you load the driver.
 
 For example, if you had two no-name CD-ROM drives both using the
 KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
-you could give the following command:
+you could give the following command::
 
 	# insmod pcd drive0=0x378,1 drive1=0x3bc,1
 
 For most adapters, giving a port address and protocol number is sufficient,
-but check the source files in linux/drivers/block/paride for more 
+but check the source files in linux/drivers/block/paride for more
 information.  (Hopefully someone will write some man pages one day !).
 
 As another example, here's what happens when PARPORT is installed, and
-a SyQuest EZ-135 is attached to port 0x378:
+a SyQuest EZ-135 is attached to port 0x378::
 
 	# insmod paride
 	paride: version 1.0 installed
@@ -237,46 +250,47 @@ Note that the last line is the output from the generic partition table
 scanner - in this case it reports that it has found a disk with one partition.
 
 2.3  Using a PARIDE device
+--------------------------
 
 Once the drivers have been loaded, you can access PARIDE devices in the
 same way as their traditional counterparts.  You will probably need to
 create the device "special files".  Here is a simple script that you can
-cut to a file and execute:
-
-#!/bin/bash
-#
-# mkd -- a script to create the device special files for the PARIDE subsystem
-#
-function mkdev {
-  mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
-}
-#
-function pd {
-  D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
-  mkdev pd$D b 45 $[ $1 * 16 ]
-  for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-  do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
-  done
-}
-#
-cd /dev
-#
-for u in 0 1 2 3 ; do pd $u ; done
-for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done 
-for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done 
-for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done 
-for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done 
-for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done 
-#
-# end of mkd
+cut to a file and execute::
+
+  #!/bin/bash
+  #
+  # mkd -- a script to create the device special files for the PARIDE subsystem
+  #
+  function mkdev {
+    mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
+  }
+  #
+  function pd {
+    D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
+    mkdev pd$D b 45 $[ $1 * 16 ]
+    for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+    do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
+    done
+  }
+  #
+  cd /dev
+  #
+  for u in 0 1 2 3 ; do pd $u ; done
+  for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
+  for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done
+  for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done
+  for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
+  for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done
+  #
+  # end of mkd
 
 With the device files and drivers in place, you can access PARIDE devices
-like any other Linux device.   For example, to mount a CD-ROM in pcd0, use:
+like any other Linux device.   For example, to mount a CD-ROM in pcd0, use::
 
 	mount /dev/pcd0 /cdrom
 
 If you have a fresh Avatar Shark cartridge, and the drive is pda, you
-might do something like:
+might do something like::
 
 	fdisk /dev/pda		-- make a new partition table with
 				   partition 1 of type 83
@@ -289,41 +303,46 @@ might do something like:
 
 Devices like the Imation superdisk work in the same way, except that
 they do not have a partition table.  For example to make a 120MB
-floppy that you could share with a DOS system:
+floppy that you could share with a DOS system::
 
 	mkdosfs /dev/pf0
 	mount /dev/pf0 /mnt
 
 
 2.4  The pf driver
+------------------
 
 The pf driver is intended for use with parallel port ATAPI disk
 devices.  The most common devices in this category are PD drives
 and LS-120 drives.  Traditionally, media for these devices are not
 partitioned.  Consequently, the pf driver does not support partitioned
-media.  This may be changed in a future version of the driver. 
+media.  This may be changed in a future version of the driver.
 
 2.5  Using the pt driver
+------------------------
 
 The pt driver for parallel port ATAPI tape drives is a minimal driver.
-It does not yet support many of the standard tape ioctl operations. 
+It does not yet support many of the standard tape ioctl operations.
 For best performance, a block size of 32KB should be used.  You will
 probably want to set the parallel port delay to 0, if you can.
 
 2.6  Using the pg driver
+------------------------
 
 The pg driver can be used in conjunction with the cdrecord program
 to create CD-ROMs.  Please get cdrecord version 1.6.1 or later
-from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ .  To record CD-R media 
-your parallel port should ideally be set to EPP mode, and the "port delay" 
-should be set to 0.  With those settings it is possible to record at 2x 
+from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ .  To record CD-R media
+your parallel port should ideally be set to EPP mode, and the "port delay"
+should be set to 0.  With those settings it is possible to record at 2x
 speed without any buffer underruns.  If you cannot get the driver to work
 in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
 
 
 3. Troubleshooting
+==================
 
 3.1  Use EPP mode if you can
+----------------------------
 
 The most common problems that people report with the PARIDE drivers
 concern the parallel port CMOS settings.  At this time, none of the
@@ -332,6 +351,7 @@ If you are able to do so, please set your parallel port into EPP mode
 using your CMOS setup procedure.
 
 3.2  Check the port delay
+-------------------------
 
 Some parallel ports cannot reliably transfer data at full speed.  To
 offset the errors, the PARIDE protocol modules introduce a "port
@@ -347,23 +367,25 @@ read the comments at the beginning of the driver source files in
 linux/drivers/block/paride.
 
 3.3  Some drives need a printer reset
+-------------------------------------
 
 There appear to be a number of "noname" external drives on the market
 that do not always power up correctly.  We have noticed this with some
 drives based on OnSpec and older Freecom adapters.  In these rare cases,
 the adapter can often be reinitialised by issuing a "printer reset" on
-the parallel port.  As the reset operation is potentially disruptive in 
-multiple device environments, the PARIDE drivers will not do it 
-automatically.  You can however, force a printer reset by doing:
+the parallel port.  As the reset operation is potentially disruptive in
+multiple device environments, the PARIDE drivers will not do it
+automatically.  You can however, force a printer reset by doing::
 
 	insmod lp reset=1
 	rmmod lp
 
 If you have one of these marginal cases, you should probably build
 your paride drivers as modules, and arrange to do the printer reset
-before loading the PARIDE drivers. 
+before loading the PARIDE drivers.
 
 3.4  Use the verbose option and dmesg if you need help
+------------------------------------------------------
 
 While a lot of testing has gone into these drivers to make them work
 as smoothly as possible, problems will arise.  If you do have problems,
@@ -373,7 +395,7 @@ clues, then please make sure that only one drive is hooked to your system,
 and that either (a) PARPORT is enabled or (b) no other device driver
 is using your parallel port (check in /proc/ioports).  Then, load the
 appropriate drivers (you can load several protocol modules if you want)
-as in:
+as in::
 
 	# insmod paride
 	# insmod epat
@@ -394,12 +416,14 @@ by e-mail to grant@torque.net, or join the linux-parport mailing list
 and post your report there.
 
 3.5  For more information or help
+---------------------------------
 
 You can join the linux-parport mailing list by sending a mail message
-to 
+to:
+
 		linux-parport-request@torque.net
 
-with the single word 
+with the single word::
 
 		subscribe
 
@@ -412,6 +436,4 @@ have in your mail headers, when sending mail to the list server.
 You might also find some useful information on the linux-parport
 web pages (although they are not always up to date) at
 
-	http://web.archive.org/web/*/http://www.torque.net/parport/
-
-
+	http://web.archive.org/web/%2E/http://www.torque.net/parport/
diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/admin-guide/blockdev/ramdisk.rst
index 501e12e0323e..b7c2268f8dec 100644
--- a/Documentation/blockdev/ramdisk.txt
+++ b/Documentation/admin-guide/blockdev/ramdisk.rst
@@ -1,7 +1,8 @@
+==========================================
 Using the RAM disk block device with Linux
-------------------------------------------
+==========================================
 
-Contents:
+.. Contents:
 
 	1) Overview
 	2) Kernel Command Line Parameters
@@ -42,7 +43,7 @@ rescue floppy disk.
 2a) Kernel Command Line Parameters
 
 	ramdisk_size=N
-	==============
+		Size of the ramdisk.
 
 This parameter tells the RAM disk driver to set up RAM disks of N k size.  The
 default is 4096 (4 MB).
@@ -50,16 +51,13 @@ default is 4096 (4 MB).
 2b) Module parameters
 
 	rd_nr
-	=====
-	/dev/ramX devices created.
+		/dev/ramX devices created.
 
 	max_part
-	========
-	Maximum partition number.
+		Maximum partition number.
 
 	rd_size
-	=======
-	See ramdisk_size.
+		See ramdisk_size.
 
 3) Using "rdev -r"
 ------------------
@@ -71,11 +69,11 @@ to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
 prompt/wait sequence is to be given before trying to read the RAM disk. Since
 the RAM disk dynamically grows as data is being written into it, a size field
 is not required. Bits 11 to 13 are not currently used and may as well be zero.
-These numbers are no magical secrets, as seen below:
+These numbers are no magical secrets, as seen below::
 
-./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
-./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
-./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
+  ./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
+  ./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
+  ./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
 
 Consider a typical two floppy disk setup, where you will have the
 kernel on disk one, and have already put a RAM disk image onto disk #2.
@@ -92,20 +90,23 @@ sequence so that you have a chance to switch floppy disks.
 The command line equivalent is: "prompt_ramdisk=1"
 
 Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
-So to create disk one of the set, you would do:
+So to create disk one of the set, you would do::
 
 	/usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
 	/usr/src/linux# rdev /dev/fd0 /dev/fd0
 	/usr/src/linux# rdev -r /dev/fd0 49152
 
-If you make a boot disk that has LILO, then for the above, you would use:
+If you make a boot disk that has LILO, then for the above, you would use::
+
 	append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
-Since the default start = 0 and the default prompt = 1, you could use:
+
+Since the default start = 0 and the default prompt = 1, you could use::
+
 	append = "load_ramdisk=1"
 
 
 4) An Example of Creating a Compressed RAM Disk
-----------------------------------------------
+-----------------------------------------------
 
 To create a RAM disk image, you will need a spare block device to
 construct it on. This can be the RAM disk device itself, or an
@@ -120,11 +121,11 @@ a) Decide on the RAM disk size that you want. Say 2 MB for this example.
    Create it by writing to the RAM disk device. (This step is not currently
    required, but may be in the future.) It is wise to zero out the
    area (esp. for disks) so that maximal compression is achieved for
-   the unused blocks of the image that you are about to create.
+   the unused blocks of the image that you are about to create::
 
 	dd if=/dev/zero of=/dev/ram0 bs=1k count=2048
 
-b) Make a filesystem on it. Say ext2fs for this example.
+b) Make a filesystem on it. Say ext2fs for this example::
 
 	mke2fs -vm0 /dev/ram0 2048
 
@@ -133,11 +134,11 @@ c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...)
 
 d) Compress the contents of the RAM disk. The level of compression
    will be approximately 50% of the space used by the files. Unused
-   space on the RAM disk will compress to almost nothing.
+   space on the RAM disk will compress to almost nothing::
 
 	dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz
 
-e) Put the kernel onto the floppy
+e) Put the kernel onto the floppy::
 
 	dd if=zImage of=/dev/fd0 bs=1k
 
@@ -146,13 +147,13 @@ f) Put the RAM disk image onto the floppy, after the kernel. Use an offset
    (possibly larger) kernel onto the same floppy later without overlapping
    the RAM disk image. An offset of 400 kB for kernels about 350 kB in
    size would be reasonable. Make sure offset+size of ram_image.gz is
-   not larger than the total space on your floppy (usually 1440 kB).
+   not larger than the total space on your floppy (usually 1440 kB)::
 
 	dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
 
 g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
    For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
-   have 2^15 + 2^14 + 400 = 49552.
+   have 2^15 + 2^14 + 400 = 49552::
 
 	rdev /dev/fd0 /dev/fd0
 	rdev -r /dev/fd0 49552
@@ -160,15 +161,17 @@ g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
 That is it. You now have your boot/root compressed RAM disk floppy. Some
 users may wish to combine steps (d) and (f) by using a pipe.
 
---------------------------------------------------------------------------
+
 						Paul Gortmaker 12/95
 
 Changelog:
 ----------
 
-10-22-04 :	Updated to reflect changes in command line options, remove
+10-22-04 :
+		Updated to reflect changes in command line options, remove
 		obsolete references, general cleanup.
 		James Nelson (james4765@gmail.com)
 
 
-12-95 :		Original Document
+12-95 :
+		Original Document
diff --git a/Documentation/blockdev/zram.txt b/Documentation/admin-guide/blockdev/zram.rst
index 4df0ce271085..6eccf13219ff 100644
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/admin-guide/blockdev/zram.rst
@@ -1,7 +1,9 @@
+========================================
 zram: Compressed RAM based block devices
-----------------------------------------
+========================================
 
-* Introduction
+Introduction
+============
 
 The zram module creates RAM based block devices named /dev/zram<id>
 (<id> = 0, 1, ...). Pages written to these disks are compressed and stored
@@ -12,9 +14,11 @@ use as swap disks, various caches under /var and maybe many more :)
 Statistics for individual zram devices are exported through sysfs nodes at
 /sys/block/zram<id>/
 
-* Usage
+Usage
+=====
 
 There are several ways to configure and manage zram device(-s):
+
 a) using zram and zram_control sysfs attributes
 b) using zramctl utility, provided by util-linux (util-linux@vger.kernel.org).
 
@@ -22,7 +26,7 @@ In this document we will describe only 'manual' zram configuration steps,
 IOW, zram and zram_control sysfs attributes.
 
 In order to get a better idea about zramctl please consult util-linux
-documentation, zramctl man-page or `zramctl --help'. Please be informed
+documentation, zramctl man-page or `zramctl --help`. Please be informed
 that zram maintainers do not develop/maintain util-linux or zramctl, should
 you have any questions please contact util-linux@vger.kernel.org
 
@@ -30,19 +34,23 @@ Following shows a typical sequence of steps for using zram.
 
 WARNING
 =======
+
 For the sake of simplicity we skip error checking parts in most of the
 examples below. However, it is your sole responsibility to handle errors.
 
 zram sysfs attributes always return negative values in case of errors.
 The list of possible return codes:
--EBUSY	-- an attempt to modify an attribute that cannot be changed once
-the device has been initialised. Please reset device first;
--ENOMEM	-- zram was not able to allocate enough memory to fulfil your
-needs;
--EINVAL	-- invalid input has been provided.
+
+========  =============================================================
+-EBUSY	  an attempt to modify an attribute that cannot be changed once
+	  the device has been initialised. Please reset device first;
+-ENOMEM	  zram was not able to allocate enough memory to fulfil your
+	  needs;
+-EINVAL	  invalid input has been provided.
+========  =============================================================
 
 If you use 'echo', the returned value that is changed by 'echo' utility,
-and, in general case, something like:
+and, in general case, something like::
 
 	echo 3 > /sys/block/zram0/max_comp_streams
 	if [ $? -ne 0 ];
@@ -51,7 +59,11 @@ and, in general case, something like:
 
 should suffice.
 
-1) Load Module:
+1) Load Module
+==============
+
+::
+
 	modprobe zram num_devices=4
 	This creates 4 devices: /dev/zram{0,1,2,3}
 
@@ -59,6 +71,8 @@ num_devices parameter is optional and tells zram how many devices should be
 pre-created. Default: 1.
 
 2) Set max number of compression streams
+========================================
+
 Regardless the value passed to this attribute, ZRAM will always
 allocate multiple compression streams - one per online CPUs - thus
 allowing several concurrent compression operations. The number of
@@ -66,16 +80,20 @@ allocated compression streams goes down when some of the CPUs
 become offline. There is no single-compression-stream mode anymore,
 unless you are running a UP system or has only 1 CPU online.
 
-To find out how many streams are currently available:
+To find out how many streams are currently available::
+
 	cat /sys/block/zram0/max_comp_streams
 
 3) Select compression algorithm
+===============================
+
 Using comp_algorithm device attribute one can see available and
 currently selected (shown in square brackets) compression algorithms,
 change selected compression algorithm (once the device is initialised
 there is no way to change compression algorithm).
 
-Examples:
+Examples::
+
 	#show supported compression algorithms
 	cat /sys/block/zram0/comp_algorithm
 	lzo [lz4]
@@ -83,20 +101,23 @@ Examples:
 	#select lzo compression algorithm
 	echo lzo > /sys/block/zram0/comp_algorithm
 
-For the time being, the `comp_algorithm' content does not necessarily
+For the time being, the `comp_algorithm` content does not necessarily
 show every compression algorithm supported by the kernel. We keep this
 list primarily to simplify device configuration and one can configure
 a new device with a compression algorithm that is not listed in
-`comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
+`comp_algorithm`. The thing is that, internally, ZRAM uses Crypto API
 and, if some of the algorithms were built as modules, it's impossible
 to list all of them using, for instance, /proc/crypto or any other
 method. This, however, has an advantage of permitting the usage of
 custom crypto compression modules (implementing S/W or H/W compression).
 
 4) Set Disksize
+===============
+
 Set disk size by writing the value to sysfs node 'disksize'.
 The value can be either in bytes or you can use mem suffixes.
-Examples:
+Examples::
+
 	# Initialize /dev/zram0 with 50MB disksize
 	echo $((50*1024*1024)) > /sys/block/zram0/disksize
 
@@ -111,10 +132,13 @@ since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the
 size of the disk when not in use so a huge zram is wasteful.
 
 5) Set memory limit: Optional
+=============================
+
 Set memory limit by writing the value to sysfs node 'mem_limit'.
 The value can be either in bytes or you can use mem suffixes.
 In addition, you could change the value in runtime.
-Examples:
+Examples::
+
 	# limit /dev/zram0 with 50MB memory
 	echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
 
@@ -126,7 +150,11 @@ Examples:
 	# To disable memory limit
 	echo 0 > /sys/block/zram0/mem_limit
 
-6) Activate:
+6) Activate
+===========
+
+::
+
 	mkswap /dev/zram0
 	swapon /dev/zram0
 
@@ -134,6 +162,7 @@ Examples:
 	mount /dev/zram1 /tmp
 
 7) Add/remove zram devices
+==========================
 
 zram provides a control interface, which enables dynamic (on-demand) device
 addition and removal.
@@ -142,44 +171,51 @@ In order to add a new /dev/zramX device, perform read operation on hot_add
 attribute. This will return either new device's device id (meaning that you
 can use /dev/zram<id>) or error code.
 
-Example:
+Example::
+
 	cat /sys/class/zram-control/hot_add
 	1
 
 To remove the existing /dev/zramX device (where X is a device id)
-execute
+execute::
+
 	echo X > /sys/class/zram-control/hot_remove
 
-8) Stats:
+8) Stats
+========
+
 Per-device statistics are exported as various nodes under /sys/block/zram<id>/
 
 A brief description of exported device attributes. For more details please
 read Documentation/ABI/testing/sysfs-block-zram.
 
+======================  ======  ===============================================
 Name            	access            description
-----            	------            -----------
+======================  ======  ===============================================
 disksize          	RW	show and set the device's disk size
 initstate         	RO	shows the initialization state of the device
 reset             	WO	trigger device reset
-mem_used_max      	WO	reset the `mem_used_max' counter (see later)
-mem_limit         	WO	specifies the maximum amount of memory ZRAM can use
-				to store the compressed data
-writeback_limit   	WO	specifies the maximum amount of write IO zram can
-				write out to backing device as 4KB unit
+mem_used_max      	WO	reset the `mem_used_max` counter (see later)
+mem_limit         	WO	specifies the maximum amount of memory ZRAM can
+				use to store the compressed data
+writeback_limit   	WO	specifies the maximum amount of write IO zram
+				can write out to backing device as 4KB unit
 writeback_limit_enable  RW	show and set writeback_limit feature
-max_comp_streams  	RW	the number of possible concurrent compress operations
+max_comp_streams  	RW	the number of possible concurrent compress
+				operations
 comp_algorithm    	RW	show and change the compression algorithm
 compact           	WO	trigger memory compaction
 debug_stat        	RO	this file is used for zram debugging purposes
 backing_dev	  	RW	set up backend storage for zram to write out
 idle		  	WO	mark allocated slot as idle
+======================  ======  ===============================================
 
 
 User space is advised to use the following files to read the device statistics.
 
 File /sys/block/zram<id>/stat
 
-Represents block layer statistics. Read Documentation/block/stat.txt for
+Represents block layer statistics. Read Documentation/block/stat.rst for
 details.
 
 File /sys/block/zram<id>/io_stat
@@ -188,23 +224,31 @@ The stat file represents device's I/O statistics not accounted by block
 layer and, thus, not available in zram<id>/stat file. It consists of a
 single line of text and contains the following stats separated by
 whitespace:
- failed_reads     the number of failed reads
- failed_writes    the number of failed writes
- invalid_io       the number of non-page-size-aligned I/O requests
+
+ =============    =============================================================
+ failed_reads     The number of failed reads
+ failed_writes    The number of failed writes
+ invalid_io       The number of non-page-size-aligned I/O requests
  notify_free      Depending on device usage scenario it may account
+
                   a) the number of pages freed because of swap slot free
-                  notifications or b) the number of pages freed because of
-                  REQ_OP_DISCARD requests sent by bio. The former ones are
-                  sent to a swap block device when a swap slot is freed,
-                  which implies that this disk is being used as a swap disk.
+                     notifications
+                  b) the number of pages freed because of
+                     REQ_OP_DISCARD requests sent by bio. The former ones are
+                     sent to a swap block device when a swap slot is freed,
+                     which implies that this disk is being used as a swap disk.
+
                   The latter ones are sent by filesystem mounted with
                   discard option, whenever some data blocks are getting
                   discarded.
+ =============    =============================================================
 
 File /sys/block/zram<id>/mm_stat
 
 The stat file represents device's mm statistics. It consists of a single
 line of text and contains the following stats separated by whitespace:
+
+ ================ =============================================================
  orig_data_size   uncompressed size of data stored in this disk.
 		  This excludes same-element-filled pages (same_pages) since
 		  no memory is allocated for them.
@@ -223,58 +267,71 @@ line of text and contains the following stats separated by whitespace:
                   No memory is allocated for such pages.
  pages_compacted  the number of pages freed during compaction
  huge_pages	  the number of incompressible pages
+ ================ =============================================================
 
 File /sys/block/zram<id>/bd_stat
 
 The stat file represents device's backing device statistics. It consists of
 a single line of text and contains the following stats separated by whitespace:
+
+ ============== =============================================================
  bd_count	size of data written in backing device.
 		Unit: 4K bytes
  bd_reads	the number of reads from backing device
 		Unit: 4K bytes
  bd_writes	the number of writes to backing device
 		Unit: 4K bytes
+ ============== =============================================================
+
+9) Deactivate
+=============
+
+::
 
-9) Deactivate:
 	swapoff /dev/zram0
 	umount /dev/zram1
 
-10) Reset:
-	Write any positive value to 'reset' sysfs node
-	echo 1 > /sys/block/zram0/reset
-	echo 1 > /sys/block/zram1/reset
+10) Reset
+=========
+
+	Write any positive value to 'reset' sysfs node::
+
+		echo 1 > /sys/block/zram0/reset
+		echo 1 > /sys/block/zram1/reset
 
 	This frees all the memory allocated for the given device and
 	resets the disksize to zero. You must set the disksize again
 	before reusing the device.
 
-* Optional Feature
+Optional Feature
+================
 
-= writeback
+writeback
+---------
 
 With CONFIG_ZRAM_WRITEBACK, zram can write idle/incompressible page
 to backing storage rather than keeping it in memory.
-To use the feature, admin should set up backing device via
+To use the feature, admin should set up backing device via::
 
-	"echo /dev/sda5 > /sys/block/zramX/backing_dev"
+	echo /dev/sda5 > /sys/block/zramX/backing_dev
 
 before disksize setting. It supports only partition at this moment.
-If admin want to use incompressible page writeback, they could do via
+If admin want to use incompressible page writeback, they could do via::
 
-	"echo huge > /sys/block/zramX/write"
+	echo huge > /sys/block/zramX/write
 
 To use idle page writeback, first, user need to declare zram pages
-as idle.
+as idle::
 
-	"echo all > /sys/block/zramX/idle"
+	echo all > /sys/block/zramX/idle
 
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone request access of the block.
 IOW, unless there is access request, those pages are still idle pages.
 
-Admin can request writeback of those idle pages at right timing via
+Admin can request writeback of those idle pages at right timing via::
 
-	"echo idle > /sys/block/zramX/writeback"
+	echo idle > /sys/block/zramX/writeback
 
 With the command, zram writeback idle pages from memory to the storage.
 
@@ -285,7 +342,7 @@ to guarantee storage health for entire product life.
 To overcome the concern, zram supports "writeback_limit" feature.
 The "writeback_limit_enable"'s default value is 0 so that it doesn't limit
 any writeback. IOW, if admin want to apply writeback budget, he should
-enable writeback_limit_enable via
+enable writeback_limit_enable via::
 
 	$ echo 1 > /sys/block/zramX/writeback_limit_enable
 
@@ -296,7 +353,7 @@ until admin set the budget via /sys/block/zramX/writeback_limit.
 assigned via /sys/block/zramX/writeback_limit is meaninless.)
 
 If admin want to limit writeback as per-day 400M, he could do it
-like below.
+like below::
 
 	$ MB_SHIFT=20
 	$ 4K_SHIFT=12
@@ -305,16 +362,16 @@ like below.
 	$ echo 1 > /sys/block/zram0/writeback_limit_enable
 
 If admin want to allow further write again once the bugdet is exausted,
-he could do it like below
+he could do it like below::
 
 	$ echo $((400<<MB_SHIFT>>4K_SHIFT)) > \
 		/sys/block/zram0/writeback_limit
 
-If admin want to see remaining writeback budget since he set,
+If admin want to see remaining writeback budget since he set::
 
 	$ cat /sys/block/zramX/writeback_limit
 
-If admin want to disable writeback limit, he could do
+If admin want to disable writeback limit, he could do::
 
 	$ echo 0 > /sys/block/zramX/writeback_limit_enable
 
@@ -326,25 +383,35 @@ budget in next setting is user's job.
 If admin want to measure writeback count in a certain period, he could
 know it via /sys/block/zram0/bd_stat's 3rd column.
 
-= memory tracking
+memory tracking
+===============
 
 With CONFIG_ZRAM_MEMORY_TRACKING, user can know information of the
 zram block. It could be useful to catch cold or incompressible
 pages of the process with*pagemap.
+
 If you enable the feature, you could see block state via
-/sys/kernel/debug/zram/zram0/block_state". The output is as follows,
+/sys/kernel/debug/zram/zram0/block_state". The output is as follows::
 
 	  300    75.033841 .wh.
 	  301    63.806904 s...
 	  302    63.806919 ..hi
 
-First column is zram's block index.
-Second column is access time since the system was booted
-Third column is state of the block.
-(s: same page
-w: written page to backing store
-h: huge page
-i: idle page)
+First column
+	zram's block index.
+Second column
+	access time since the system was booted
+Third column
+	state of the block:
+
+	s:
+		same page
+	w:
+		written page to backing store
+	h:
+		huge page
+	i:
+		idle page
 
 First line of above example says 300th block is accessed at 75.033841sec
 and the block's state is huge so it is written back to the backing
diff --git a/Documentation/btmrvl.txt b/Documentation/admin-guide/btmrvl.rst
index ec57740ead0c..ec57740ead0c 100644
--- a/Documentation/btmrvl.txt
+++ b/Documentation/admin-guide/btmrvl.rst
diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst
index b761aa2a51d2..44b8a4edd348 100644
--- a/Documentation/admin-guide/bug-hunting.rst
+++ b/Documentation/admin-guide/bug-hunting.rst
@@ -90,9 +90,9 @@ the disk is not available then you have three options:
     run a null modem to a second machine and capture the output there
     using your favourite communication program.  Minicom works well.
 
-(3) Use Kdump (see Documentation/kdump/kdump.rst),
+(3) Use Kdump (see Documentation/admin-guide/kdump/kdump.rst),
     extract the kernel ring buffer from old memory with using dmesg
-    gdbmacro in Documentation/kdump/gdbmacros.txt.
+    gdbmacro in Documentation/admin-guide/kdump/gdbmacros.txt.
 
 Finding the bug's location
 --------------------------
diff --git a/Documentation/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
index 1d7d962933be..1d7d962933be 100644
--- a/Documentation/cgroup-v1/blkio-controller.rst
+++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
diff --git a/Documentation/cgroup-v1/cgroups.rst b/Documentation/admin-guide/cgroup-v1/cgroups.rst
index 46bbe7e022d4..b0688011ed06 100644
--- a/Documentation/cgroup-v1/cgroups.rst
+++ b/Documentation/admin-guide/cgroup-v1/cgroups.rst
@@ -3,7 +3,7 @@ Control Groups
 ==============
 
 Written by Paul Menage <menage@google.com> based on
-Documentation/cgroup-v1/cpusets.rst
+Documentation/admin-guide/cgroup-v1/cpusets.rst
 
 Original copyright statements from cpusets.txt:
 
@@ -76,7 +76,7 @@ On their own, the only use for cgroups is for simple job
 tracking. The intention is that other subsystems hook into the generic
 cgroup support to provide new attributes for cgroups, such as
 accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cgroup-v1/cpusets.rst) allow
+access. For example, cpusets (see Documentation/admin-guide/cgroup-v1/cpusets.rst) allow
 you to associate a set of CPUs and a set of memory nodes with the
 tasks in each cgroup.
 
diff --git a/Documentation/cgroup-v1/cpuacct.rst b/Documentation/admin-guide/cgroup-v1/cpuacct.rst
index d30ed81d2ad7..d30ed81d2ad7 100644
--- a/Documentation/cgroup-v1/cpuacct.rst
+++ b/Documentation/admin-guide/cgroup-v1/cpuacct.rst
diff --git a/Documentation/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst
index b6a42cdea72b..86a6ae995d54 100644
--- a/Documentation/cgroup-v1/cpusets.rst
+++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -49,7 +49,7 @@ hooks, beyond what is already present, required to manage dynamic
 job placement on large systems.
 
 Cpusets use the generic cgroup subsystem described in
-Documentation/cgroup-v1/cgroups.rst.
+Documentation/admin-guide/cgroup-v1/cgroups.rst.
 
 Requests by a task, using the sched_setaffinity(2) system call to
 include CPUs in its CPU affinity mask, and using the mbind(2) and
diff --git a/Documentation/cgroup-v1/devices.rst b/Documentation/admin-guide/cgroup-v1/devices.rst
index e1886783961e..e1886783961e 100644
--- a/Documentation/cgroup-v1/devices.rst
+++ b/Documentation/admin-guide/cgroup-v1/devices.rst
diff --git a/Documentation/cgroup-v1/freezer-subsystem.rst b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst
index 582d3427de3f..582d3427de3f 100644
--- a/Documentation/cgroup-v1/freezer-subsystem.rst
+++ b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst
diff --git a/Documentation/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
index a3902aa253a9..a3902aa253a9 100644
--- a/Documentation/cgroup-v1/hugetlb.rst
+++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
diff --git a/Documentation/cgroup-v1/index.rst b/Documentation/admin-guide/cgroup-v1/index.rst
index fe76d42edc11..10bf48bae0b0 100644
--- a/Documentation/cgroup-v1/index.rst
+++ b/Documentation/admin-guide/cgroup-v1/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ========================
 Control Groups version 1
 ========================
diff --git a/Documentation/cgroup-v1/memcg_test.rst b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
index 91bd18c6a514..3f7115e07b5d 100644
--- a/Documentation/cgroup-v1/memcg_test.rst
+++ b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
@@ -10,7 +10,7 @@ Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
 Please note that implementation details can be changed.
 
-(*) Topics on API should be in Documentation/cgroup-v1/memory.rst)
+(*) Topics on API should be in Documentation/admin-guide/cgroup-v1/memory.rst)
 
 0. How to record usage ?
 ========================
@@ -327,7 +327,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	You can see charges have been moved by reading ``*.usage_in_bytes`` or
 	memory.stat of both A and B.
 
-	See 8.2 of Documentation/cgroup-v1/memory.rst to see what value should
+	See 8.2 of Documentation/admin-guide/cgroup-v1/memory.rst to see what value should
 	be written to move_charge_at_immigrate.
 
 9.10 Memory thresholds
diff --git a/Documentation/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
index 41bdc038dad9..41bdc038dad9 100644
--- a/Documentation/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
diff --git a/Documentation/cgroup-v1/net_cls.rst b/Documentation/admin-guide/cgroup-v1/net_cls.rst
index a2cf272af7a0..a2cf272af7a0 100644
--- a/Documentation/cgroup-v1/net_cls.rst
+++ b/Documentation/admin-guide/cgroup-v1/net_cls.rst
diff --git a/Documentation/cgroup-v1/net_prio.rst b/Documentation/admin-guide/cgroup-v1/net_prio.rst
index b40905871c64..b40905871c64 100644
--- a/Documentation/cgroup-v1/net_prio.rst
+++ b/Documentation/admin-guide/cgroup-v1/net_prio.rst
diff --git a/Documentation/cgroup-v1/pids.rst b/Documentation/admin-guide/cgroup-v1/pids.rst
index 6acebd9e72c8..6acebd9e72c8 100644
--- a/Documentation/cgroup-v1/pids.rst
+++ b/Documentation/admin-guide/cgroup-v1/pids.rst
diff --git a/Documentation/cgroup-v1/rdma.rst b/Documentation/admin-guide/cgroup-v1/rdma.rst
index 2fcb0a9bf790..2fcb0a9bf790 100644
--- a/Documentation/cgroup-v1/rdma.rst
+++ b/Documentation/admin-guide/cgroup-v1/rdma.rst
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 8269e869cb1e..3b29005aa981 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -9,7 +9,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-v1/.
+v1 is available under Documentation/admin-guide/cgroup-v1/.
 
 .. CONTENTS
 
@@ -1014,7 +1014,7 @@ All time durations are in microseconds.
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for CPU. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Memory
@@ -1355,7 +1355,7 @@ PAGE_SIZE multiple when read back.
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for memory. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Usage Guidelines
@@ -1498,7 +1498,7 @@ IO Interface Files
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for IO. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Writeback
diff --git a/Documentation/clearing-warn-once.txt b/Documentation/admin-guide/clearing-warn-once.rst
index 211fd926cf00..211fd926cf00 100644
--- a/Documentation/clearing-warn-once.txt
+++ b/Documentation/admin-guide/clearing-warn-once.rst
diff --git a/Documentation/cpu-load.txt b/Documentation/admin-guide/cpu-load.rst
index 2d01ce43d2a2..2d01ce43d2a2 100644
--- a/Documentation/cpu-load.txt
+++ b/Documentation/admin-guide/cpu-load.rst
diff --git a/Documentation/cputopology.txt b/Documentation/admin-guide/cputopology.rst
index b90dafcc8237..b90dafcc8237 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/admin-guide/cputopology.rst
diff --git a/Documentation/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
index b17fe352fc41..b17fe352fc41 100644
--- a/Documentation/device-mapper/cache-policies.rst
+++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
diff --git a/Documentation/device-mapper/cache.rst b/Documentation/admin-guide/device-mapper/cache.rst
index f15e5254d05b..f15e5254d05b 100644
--- a/Documentation/device-mapper/cache.rst
+++ b/Documentation/admin-guide/device-mapper/cache.rst
diff --git a/Documentation/device-mapper/delay.rst b/Documentation/admin-guide/device-mapper/delay.rst
index 917ba8c33359..917ba8c33359 100644
--- a/Documentation/device-mapper/delay.rst
+++ b/Documentation/admin-guide/device-mapper/delay.rst
diff --git a/Documentation/device-mapper/dm-crypt.rst b/Documentation/admin-guide/device-mapper/dm-crypt.rst
index 8f4a3f889d43..8f4a3f889d43 100644
--- a/Documentation/device-mapper/dm-crypt.rst
+++ b/Documentation/admin-guide/device-mapper/dm-crypt.rst
diff --git a/Documentation/device-mapper/dm-dust.txt b/Documentation/admin-guide/device-mapper/dm-dust.txt
index 954d402a1f6a..954d402a1f6a 100644
--- a/Documentation/device-mapper/dm-dust.txt
+++ b/Documentation/admin-guide/device-mapper/dm-dust.txt
diff --git a/Documentation/device-mapper/dm-flakey.rst b/Documentation/admin-guide/device-mapper/dm-flakey.rst
index 86138735879d..86138735879d 100644
--- a/Documentation/device-mapper/dm-flakey.rst
+++ b/Documentation/admin-guide/device-mapper/dm-flakey.rst
diff --git a/Documentation/device-mapper/dm-init.rst b/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..e5242ff17e9b 100644
--- a/Documentation/device-mapper/dm-init.rst
+++ b/Documentation/admin-guide/device-mapper/dm-init.rst
diff --git a/Documentation/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
index a30aa91b5fbe..a30aa91b5fbe 100644
--- a/Documentation/device-mapper/dm-integrity.rst
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
diff --git a/Documentation/device-mapper/dm-io.rst b/Documentation/admin-guide/device-mapper/dm-io.rst
index d2492917a1f5..d2492917a1f5 100644
--- a/Documentation/device-mapper/dm-io.rst
+++ b/Documentation/admin-guide/device-mapper/dm-io.rst
diff --git a/Documentation/device-mapper/dm-log.rst b/Documentation/admin-guide/device-mapper/dm-log.rst
index ba4fce39bc27..ba4fce39bc27 100644
--- a/Documentation/device-mapper/dm-log.rst
+++ b/Documentation/admin-guide/device-mapper/dm-log.rst
diff --git a/Documentation/device-mapper/dm-queue-length.rst b/Documentation/admin-guide/device-mapper/dm-queue-length.rst
index d8e381c1cb02..d8e381c1cb02 100644
--- a/Documentation/device-mapper/dm-queue-length.rst
+++ b/Documentation/admin-guide/device-mapper/dm-queue-length.rst
diff --git a/Documentation/device-mapper/dm-raid.rst b/Documentation/admin-guide/device-mapper/dm-raid.rst
index 2fe255b130fb..2fe255b130fb 100644
--- a/Documentation/device-mapper/dm-raid.rst
+++ b/Documentation/admin-guide/device-mapper/dm-raid.rst
diff --git a/Documentation/device-mapper/dm-service-time.rst b/Documentation/admin-guide/device-mapper/dm-service-time.rst
index facf277fc13c..facf277fc13c 100644
--- a/Documentation/device-mapper/dm-service-time.rst
+++ b/Documentation/admin-guide/device-mapper/dm-service-time.rst
diff --git a/Documentation/device-mapper/dm-uevent.rst b/Documentation/admin-guide/device-mapper/dm-uevent.rst
index 4a8ee8d069c9..4a8ee8d069c9 100644
--- a/Documentation/device-mapper/dm-uevent.rst
+++ b/Documentation/admin-guide/device-mapper/dm-uevent.rst
diff --git a/Documentation/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
index 07f56ebc1730..07f56ebc1730 100644
--- a/Documentation/device-mapper/dm-zoned.rst
+++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
diff --git a/Documentation/device-mapper/era.rst b/Documentation/admin-guide/device-mapper/era.rst
index 90dd5c670b9f..90dd5c670b9f 100644
--- a/Documentation/device-mapper/era.rst
+++ b/Documentation/admin-guide/device-mapper/era.rst
diff --git a/Documentation/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
index 105e253bc231..c77c58b8f67b 100644
--- a/Documentation/device-mapper/index.rst
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 =============
 Device Mapper
 =============
diff --git a/Documentation/device-mapper/kcopyd.rst b/Documentation/admin-guide/device-mapper/kcopyd.rst
index 7651d395127f..7651d395127f 100644
--- a/Documentation/device-mapper/kcopyd.rst
+++ b/Documentation/admin-guide/device-mapper/kcopyd.rst
diff --git a/Documentation/device-mapper/linear.rst b/Documentation/admin-guide/device-mapper/linear.rst
index 9d17fc6e64a9..9d17fc6e64a9 100644
--- a/Documentation/device-mapper/linear.rst
+++ b/Documentation/admin-guide/device-mapper/linear.rst
diff --git a/Documentation/device-mapper/log-writes.rst b/Documentation/admin-guide/device-mapper/log-writes.rst
index 23141f2ffb7c..23141f2ffb7c 100644
--- a/Documentation/device-mapper/log-writes.rst
+++ b/Documentation/admin-guide/device-mapper/log-writes.rst
diff --git a/Documentation/device-mapper/persistent-data.rst b/Documentation/admin-guide/device-mapper/persistent-data.rst
index 2065c3c5a091..2065c3c5a091 100644
--- a/Documentation/device-mapper/persistent-data.rst
+++ b/Documentation/admin-guide/device-mapper/persistent-data.rst
diff --git a/Documentation/device-mapper/snapshot.rst b/Documentation/admin-guide/device-mapper/snapshot.rst
index ccdd8b587a74..ccdd8b587a74 100644
--- a/Documentation/device-mapper/snapshot.rst
+++ b/Documentation/admin-guide/device-mapper/snapshot.rst
diff --git a/Documentation/device-mapper/statistics.rst b/Documentation/admin-guide/device-mapper/statistics.rst
index 3d80a9f850cc..41ded0bc5933 100644
--- a/Documentation/device-mapper/statistics.rst
+++ b/Documentation/admin-guide/device-mapper/statistics.rst
@@ -13,7 +13,7 @@ the range specified.
 
 The I/O statistics counters for each step-sized area of a region are
 in the same format as `/sys/block/*/stat` or `/proc/diskstats` (see:
-Documentation/iostats.txt).  But two extra counters (12 and 13) are
+Documentation/admin-guide/iostats.rst).  But two extra counters (12 and 13) are
 provided: total time spent reading and writing.  When the histogram
 argument is used, the 14th parameter is reported that represents the
 histogram of latencies.  All these counters may be accessed by sending
@@ -151,7 +151,7 @@ Messages
 	  The first 11 counters have the same meaning as
 	  `/sys/block/*/stat or /proc/diskstats`.
 
-	  Please refer to Documentation/iostats.txt for details.
+	  Please refer to Documentation/admin-guide/iostats.rst for details.
 
 	  1. the number of reads completed
 	  2. the number of reads merged
diff --git a/Documentation/device-mapper/striped.rst b/Documentation/admin-guide/device-mapper/striped.rst
index e9a8da192ae1..e9a8da192ae1 100644
--- a/Documentation/device-mapper/striped.rst
+++ b/Documentation/admin-guide/device-mapper/striped.rst
diff --git a/Documentation/device-mapper/switch.rst b/Documentation/admin-guide/device-mapper/switch.rst
index 7dde06be1a4f..7dde06be1a4f 100644
--- a/Documentation/device-mapper/switch.rst
+++ b/Documentation/admin-guide/device-mapper/switch.rst
diff --git a/Documentation/device-mapper/thin-provisioning.rst b/Documentation/admin-guide/device-mapper/thin-provisioning.rst
index bafebf79da4b..bafebf79da4b 100644
--- a/Documentation/device-mapper/thin-provisioning.rst
+++ b/Documentation/admin-guide/device-mapper/thin-provisioning.rst
diff --git a/Documentation/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
index 0a8d3eb3f072..0a8d3eb3f072 100644
--- a/Documentation/device-mapper/unstriped.rst
+++ b/Documentation/admin-guide/device-mapper/unstriped.rst
diff --git a/Documentation/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst
index a4d1c1476d72..a4d1c1476d72 100644
--- a/Documentation/device-mapper/verity.rst
+++ b/Documentation/admin-guide/device-mapper/verity.rst
diff --git a/Documentation/device-mapper/writecache.rst b/Documentation/admin-guide/device-mapper/writecache.rst
index d3d7690f5e8d..d3d7690f5e8d 100644
--- a/Documentation/device-mapper/writecache.rst
+++ b/Documentation/admin-guide/device-mapper/writecache.rst
diff --git a/Documentation/device-mapper/zero.rst b/Documentation/admin-guide/device-mapper/zero.rst
index 11fb5cf4597c..11fb5cf4597c 100644
--- a/Documentation/device-mapper/zero.rst
+++ b/Documentation/admin-guide/device-mapper/zero.rst
diff --git a/Documentation/efi-stub.txt b/Documentation/admin-guide/efi-stub.rst
index 833edb0d0bc4..833edb0d0bc4 100644
--- a/Documentation/efi-stub.txt
+++ b/Documentation/admin-guide/efi-stub.rst
diff --git a/Documentation/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst
index 09a4a553f434..a244ba4e87d5 100644
--- a/Documentation/gpio/index.rst
+++ b/Documentation/admin-guide/gpio/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ====
 gpio
diff --git a/Documentation/gpio/sysfs.rst b/Documentation/admin-guide/gpio/sysfs.rst
index ec09ffd983e7..ec09ffd983e7 100644
--- a/Documentation/gpio/sysfs.rst
+++ b/Documentation/admin-guide/gpio/sysfs.rst
diff --git a/Documentation/highuid.txt b/Documentation/admin-guide/highuid.rst
index 6ee70465c0ea..6ee70465c0ea 100644
--- a/Documentation/highuid.txt
+++ b/Documentation/admin-guide/highuid.rst
diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst
index 656aee262e23..f83212fae4d5 100644
--- a/Documentation/admin-guide/hw-vuln/l1tf.rst
+++ b/Documentation/admin-guide/hw-vuln/l1tf.rst
@@ -241,7 +241,7 @@ Guest mitigation mechanisms
    For further information about confining guests to a single or to a group
    of cores consult the cpusets documentation:
 
-   https://www.kernel.org/doc/Documentation/cgroup-v1/cpusets.rst
+   https://www.kernel.org/doc/Documentation/admin-guide/cgroup-v1/cpusets.rst
 
 .. _interrupt_isolation:
 
diff --git a/Documentation/hw_random.txt b/Documentation/admin-guide/hw_random.rst
index 121de96e395e..121de96e395e 100644
--- a/Documentation/hw_random.txt
+++ b/Documentation/admin-guide/hw_random.rst
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 24fbe0568eff..280355d08af5 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -16,6 +16,7 @@ etc.
    README
    kernel-parameters
    devices
+   sysctl/index
 
 This section describes CPU vulnerabilities and their mitigations.
 
@@ -38,6 +39,8 @@ problems and bugs in particular.
    ramoops
    dynamic-debug-howto
    init
+   kdump/index
+   perf/index
 
 This is the beginning of a section with information of interest to
 application developers.  Documents covering various aspects of the kernel
@@ -56,11 +59,13 @@ configure specific aspects of kernel behavior to your liking.
 
    initrd
    cgroup-v2
+   cgroup-v1/index
    serial-console
    braille-console
    parport
    md
    module-signing
+   rapidio
    sysrq
    unicode
    vga-softcursor
@@ -69,14 +74,37 @@ configure specific aspects of kernel behavior to your liking.
    java
    ras
    bcache
+   blockdev/index
    ext4
    binderfs
    pm/index
    thunderbolt
    LSM/index
    mm/index
+   namespaces/index
    perf-security
    acpi/index
+   aoe/index
+   btmrvl
+   clearing-warn-once
+   cpu-load
+   cputopology
+   device-mapper/index
+   efi-stub
+   gpio/index
+   highuid
+   hw_random
+   iostats
+   kernel-per-CPU-kthreads
+   laptops/index
+   lcd-panel-cgram
+   ldm
+   lockup-watchdogs
+   numastat
+   pnp
+   rtc
+   svga
+   video-output
 
 .. only::  subproject and html
 
diff --git a/Documentation/iostats.txt b/Documentation/admin-guide/iostats.rst
index 5d63b18bd6d1..5d63b18bd6d1 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/admin-guide/iostats.rst
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
index 220d0a80ca2c..220d0a80ca2c 100644
--- a/Documentation/kdump/gdbmacros.txt
+++ b/Documentation/admin-guide/kdump/gdbmacros.txt
diff --git a/Documentation/kdump/index.rst b/Documentation/admin-guide/kdump/index.rst
index 2b17fcf6867a..8e2ebd0383cd 100644
--- a/Documentation/kdump/index.rst
+++ b/Documentation/admin-guide/kdump/index.rst
@@ -1,4 +1,3 @@
-:orphan:
 
 ================================================================
 Documentation for Kdump - The kexec-based Crash Dumping Solution
diff --git a/Documentation/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index ac7e131d2935..ac7e131d2935 100644
--- a/Documentation/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
diff --git a/Documentation/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 007a6b86e0ee..007a6b86e0ee 100644
--- a/Documentation/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index 5d29ba5ad88c..d05d531b4ec9 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -118,7 +118,7 @@ parameter is applicable::
 	LOOP	Loopback device support is enabled.
 	M68k	M68k architecture is enabled.
 			These options have more detailed description inside of
-			Documentation/m68k/kernel-options.txt.
+			Documentation/m68k/kernel-options.rst.
 	MDA	MDA console support is enabled.
 	MIPS	MIPS architecture is enabled.
 	MOUSE	Appropriate mouse support is enabled.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index f8b62360b18c..34a363f91b46 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -430,7 +430,7 @@
 
 	blkdevparts=	Manual partition parsing of block device(s) for
 			embedded devices based on command line input.
-			See Documentation/block/cmdline-partition.txt
+			See Documentation/block/cmdline-partition.rst
 
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
@@ -708,14 +708,14 @@
 			[KNL, x86_64] select a region under 4G first, and
 			fall back to reserve region above 4G when '@offset'
 			hasn't been specified.
-			See Documentation/kdump/kdump.rst for further details.
+			See Documentation/admin-guide/kdump/kdump.rst for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.rst for an example.
+			Documentation/admin-guide/kdump/kdump.rst for an example.
 
 	crashkernel=size[KMG],high
 			[KNL, x86_64] range could be above 4G. Allow kernel
@@ -930,7 +930,7 @@
 			edid/1680x1050.bin, or edid/1920x1080.bin is given
 			and no file with the same name exists. Details and
 			instructions how to build your own EDID data are
-			available in Documentation/EDID/howto.rst. An EDID
+			available in Documentation/driver-api/edid.rst. An EDID
 			data set will only be used for a particular connector,
 			if its name and a colon are prepended to the EDID
 			name. Each connector may use a unique EDID data
@@ -1199,15 +1199,15 @@
 
 	elevator=	[IOSCHED]
 			Format: { "mq-deadline" | "kyber" | "bfq" }
-			See Documentation/block/deadline-iosched.txt,
-			Documentation/block/kyber-iosched.txt and
-			Documentation/block/bfq-iosched.txt for details.
+			See Documentation/block/deadline-iosched.rst,
+			Documentation/block/kyber-iosched.rst and
+			Documentation/block/bfq-iosched.rst for details.
 
 	elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
 			Specifies physical address of start of kernel core
 			image elf header and optionally the size. Generally
 			kexec loader will pass this option to capture kernel.
-			See Documentation/kdump/kdump.rst for details.
+			See Documentation/admin-guide/kdump/kdump.rst for details.
 
 	enable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
@@ -1249,7 +1249,7 @@
 			See also Documentation/fault-injection/.
 
 	floppy=		[HW]
-			See Documentation/blockdev/floppy.txt.
+			See Documentation/admin-guide/blockdev/floppy.rst.
 
 	force_pal_cache_flush
 			[IA-64] Avoid check_sal_cache_flush which may hang on
@@ -2234,7 +2234,7 @@
 	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/admin-guide/blockdev/ramdisk.rst.
 
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
 			Format: <integer>
@@ -3144,7 +3144,7 @@
 	numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
 			'node', 'default' can be specified
 			This can be set from sysctl after boot.
-			See Documentation/sysctl/vm.txt for details.
+			See Documentation/admin-guide/sysctl/vm.rst for details.
 
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
 			See Documentation/debugging-via-ohci1394.txt for more
@@ -3268,7 +3268,7 @@
 
 	pcd.		[PARIDE]
 			See header of drivers/block/paride/pcd.c.
-			See also Documentation/blockdev/paride.txt.
+			See also Documentation/admin-guide/blockdev/paride.rst.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options.
 
@@ -3512,7 +3512,7 @@
 			needed on a platform with proper driver support.
 
 	pd.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/admin-guide/blockdev/paride.rst.
 
 	pdcchassis=	[PARISC,HW] Disable/Enable PDC Chassis Status codes at
 			boot time.
@@ -3527,10 +3527,10 @@
 			and performance comparison.
 
 	pf.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/admin-guide/blockdev/paride.rst.
 
 	pg.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/admin-guide/blockdev/paride.rst.
 
 	pirq=		[SMP,APIC] Manual mp-table setup
 			See Documentation/x86/i386/IO-APIC.rst.
@@ -3642,7 +3642,7 @@
 
 	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
 			before loading.
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/admin-guide/blockdev/ramdisk.rst.
 
 	psi=		[KNL] Enable or disable pressure stall information
 			tracking.
@@ -3664,7 +3664,7 @@
 	pstore.backend=	Specify the name of the pstore backend to use
 
 	pt.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/admin-guide/blockdev/paride.rst.
 
 	pti=		[X86_64] Control Page Table Isolation of user and
 			kernel address spaces.  Disabling this feature
@@ -3693,7 +3693,7 @@
 			See Documentation/admin-guide/md.rst.
 
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/admin-guide/blockdev/ramdisk.rst.
 
 	random.trust_cpu={on,off}
 			[KNL] Enable or disable trusting the use of the
@@ -4089,7 +4089,7 @@
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cgroup-v1/cpusets.rst.
+			See Documentation/admin-guide/cgroup-v1/cpusets.rst.
 
 	reserve=	[KNL,BUGS] Force kernel to ignore I/O ports or memory
 			Format: <base1>,<size1>[,<base2>,<size2>,...]
@@ -4347,7 +4347,7 @@
 			Format: <integer>
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
-			See Documentation/laptops/sonypi.txt
+			See Documentation/admin-guide/laptops/sonypi.rst
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
@@ -4599,7 +4599,7 @@
 	swapaccount=[0|1]
 			[KNL] Enable accounting of swap in memory resource
 			controller if no parameter or 1 is given or disable
-			it if 0 is given (See Documentation/cgroup-v1/memory.rst)
+			it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
 
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
 			Format: { <int> | force | noforce }
@@ -5066,7 +5066,7 @@
 
 	vga=		[BOOT,X86-32] Select a particular video mode
 			See Documentation/x86/boot.rst and
-			Documentation/svga.txt.
+			Documentation/admin-guide/svga.rst.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
 			passed to the kernel using a special protocol.
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 5623b9916411..4f18456dd3b1 100644
--- a/Documentation/kernel-per-CPU-kthreads.txt
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -12,7 +12,7 @@ References
 
 -	Documentation/IRQ-affinity.txt:  Binding interrupts to sets of CPUs.
 
--	Documentation/cgroup-v1:  Using cgroups to bind tasks to sets of CPUs.
+-	Documentation/admin-guide/cgroup-v1:  Using cgroups to bind tasks to sets of CPUs.
 
 -	man taskset:  Using the taskset command to bind tasks to sets
 	of CPUs.
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/admin-guide/laptops/asus-laptop.rst
index 5f2858712aa0..95176321a25a 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/admin-guide/laptops/asus-laptop.rst
@@ -1,6 +1,9 @@
+==================
 Asus Laptop Extras
+==================
 
 Version 0.1
+
 August 6, 2009
 
 Corentin Chary <corentincj@iksaif.net>
@@ -10,11 +13,12 @@ http://acpi4asus.sf.net/
  It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
  VICTOR XP7210 for example). It makes all the extra buttons generate input
  events (like keyboards).
+
  On some models adds support for changing the display brightness and output,
  switching the LCD backlight on and off, and most importantly, allows you to
  blink those fancy LEDs intended for reporting mail and wireless status.
 
-This driver supercedes the old asus_acpi driver.
+This driver supersedes the old asus_acpi driver.
 
 Requirements
 ------------
@@ -49,7 +53,7 @@ Usage
   see some lines like this :
 
       Asus Laptop Extras version 0.42
-        L2D model detected.
+        - L2D model detected.
 
   If it is not the output you have on your laptop, send it (and the laptop's
   DSDT) to me.
@@ -68,9 +72,12 @@ Usage
 LEDs
 ----
 
-  You can modify LEDs be echoing values to /sys/class/leds/asus::*/brightness :
+  You can modify LEDs be echoing values to `/sys/class/leds/asus/*/brightness`::
+
     echo 1 >  /sys/class/leds/asus::mail/brightness
+
   will switch the mail LED on.
+
   You can also know if they are on/off by reading their content and use
   kernel triggers like disk-activity or heartbeat.
 
@@ -81,7 +88,7 @@ Backlight
   /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15.
 
 Wireless devices
----------------
+----------------
 
   You can turn the internal Bluetooth adapter on/off with the bluetooth entry
   (only on models with Bluetooth). This usually controls the associated LED.
@@ -93,18 +100,20 @@ Display switching
   Note: the display switching code is currently considered EXPERIMENTAL.
 
   Switching works for the following models:
-    L3800C
-    A2500H
-    L5800C
-    M5200N
-    W1000N (albeit with some glitches)
-    M6700R
-    A6JC
-    F3J
+
+    - L3800C
+    - A2500H
+    - L5800C
+    - M5200N
+    - W1000N (albeit with some glitches)
+    - M6700R
+    - A6JC
+    - F3J
 
   Switching doesn't work for the following:
-    M3700N
-    L2X00D (locks the laptop under certain conditions)
+
+    - M3700N
+    - L2X00D (locks the laptop under certain conditions)
 
   To switch the displays, echo values from 0 to 15 to
   /sys/devices/platform/asus-laptop/display. The significance of those values
@@ -113,48 +122,51 @@ Display switching
   +-------+-----+-----+-----+-----+-----+
   | Bin   | Val | DVI | TV  | CRT | LCD |
   +-------+-----+-----+-----+-----+-----+
-  + 0000  +   0 +     +     +     +     +
+  | 0000  |   0 |     |     |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0001  +   1 +     +     +     +  X  +
+  | 0001  |   1 |     |     |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 0010  +   2 +     +     +  X  +     +
+  | 0010  |   2 |     |     |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0011  +   3 +     +     +  X  +  X  +
+  | 0011  |   3 |     |     |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 0100  +   4 +     +  X  +     +     +
+  | 0100  |   4 |     |  X  |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0101  +   5 +     +  X  +     + X   +
+  | 0101  |   5 |     |  X  |     | X   |
   +-------+-----+-----+-----+-----+-----+
-  + 0110  +   6 +     +  X  +  X  +     +
+  | 0110  |   6 |     |  X  |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0111  +   7 +     +  X  +  X  +  X  +
+  | 0111  |   7 |     |  X  |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1000  +   8 +  X  +     +     +     +
+  | 1000  |   8 |  X  |     |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1001  +   9 +  X  +     +     +  X  +
+  | 1001  |   9 |  X  |     |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1010  +  10 +  X  +     +  X  +     +
+  | 1010  |  10 |  X  |     |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1011  +  11 +  X  +     +  X  +  X  +
+  | 1011  |  11 |  X  |     |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1100  +  12 +  X  +  X  +     +     +
+  | 1100  |  12 |  X  |  X  |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1101  +  13 +  X  +  X  +     +  X  +
+  | 1101  |  13 |  X  |  X  |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1110  +  14 +  X  +  X  +  X  +     +
+  | 1110  |  14 |  X  |  X  |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1111  +  15 +  X  +  X  +  X  +  X  +
+  | 1111  |  15 |  X  |  X  |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
 
   In most cases, the appropriate displays must be plugged in for the above
   combinations to work. TV-Out may need to be initialized at boot time.
 
   Debugging:
+
   1) Check whether the Fn+F8 key:
+
      a) does not lock the laptop (try a boot with noapic / nolapic if it does)
      b) generates events (0x6n, where n is the value corresponding to the
         configuration above)
      c) actually works
+
      Record the disp value at every configuration.
   2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display.
      Record its value, note any change. If nothing changes, try a broader range,
@@ -164,7 +176,7 @@ Display switching
 
   Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n
   events are generated and no actual switching occurs. In such a case, a line
-  like:
+  like::
 
     echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display
 
@@ -180,15 +192,16 @@ LED display
   several items of information.
 
   LED display works for the following models:
-    W1000N
-    W1J
 
-  To control the LED display, use the following :
+    - W1000N
+    - W1J
+
+  To control the LED display, use the following::
 
     echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
 
   where T control the 3 letters display, and DDD the 3 digits display,
-  according to the tables below.
+  according to the tables below::
 
          DDD (digits)
          000 to 999 = display digits
@@ -208,8 +221,8 @@ LED display
   For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd"
   would display "DVD001".
 
-Driver options:
----------------
+Driver options
+--------------
 
  Options can be passed to the asus-laptop driver using the standard
  module argument syntax (<param>=<value> when passing the option to the
@@ -219,6 +232,7 @@ Driver options:
 	     wapf: WAPF defines the behavior of the Fn+Fx wlan key
 		   The significance of values is yet to be found, but
 		   most of the time:
+
 		   - 0x0 should do nothing
 		   - 0x1 should allow to control the device with Fn+Fx key.
 		   - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key
@@ -237,7 +251,7 @@ Unsupported models
  - ASUS L7300G
  - ASUS L8400
 
-Patches, Errors, Questions:
+Patches, Errors, Questions
 --------------------------
 
  I appreciate any success or failure
@@ -253,5 +267,5 @@ Patches, Errors, Questions:
  Any other comments or patches are also more than welcome.
 
  acpi4asus-user@lists.sourceforge.net
- http://sourceforge.net/projects/acpi4asus
 
+ http://sourceforge.net/projects/acpi4asus
diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/admin-guide/laptops/disk-shock-protection.rst
index 0e6ba2663834..e97c5f78d8c3 100644
--- a/Documentation/laptops/disk-shock-protection.txt
+++ b/Documentation/admin-guide/laptops/disk-shock-protection.rst
@@ -1,17 +1,18 @@
+==========================
 Hard disk shock protection
 ==========================
 
 Author: Elias Oltmanns <eo@nebensachen.de>
+
 Last modified: 2008-10-03
 
 
-0. Contents
------------
+.. 0. Contents
 
-1. Intro
-2. The interface
-3. References
-4. CREDITS
+   1. Intro
+   2. The interface
+   3. References
+   4. CREDITS
 
 
 1. Intro
@@ -36,8 +37,8 @@ that).
 ----------------
 
 For each ATA device, the kernel exports the file
-block/*/device/unload_heads in sysfs (here assumed to be mounted under
-/sys). Access to /sys/block/*/device/unload_heads is denied with
+`block/*/device/unload_heads` in sysfs (here assumed to be mounted under
+/sys). Access to `/sys/block/*/device/unload_heads` is denied with
 -EOPNOTSUPP if the device does not support the unload feature.
 Otherwise, writing an integer value to this file will take the heads
 of the respective drive off the platter and block all I/O operations
@@ -54,18 +55,18 @@ cancel a previously set timeout and resume normal operation
 immediately by specifying a timeout of 0. Values below -2 are rejected
 with -EINVAL (see below for the special meaning of -1 and -2). If the
 timeout specified for a recent head park request has not yet expired,
-reading from /sys/block/*/device/unload_heads will report the number
+reading from `/sys/block/*/device/unload_heads` will report the number
 of milliseconds remaining until normal operation will be resumed;
 otherwise, reading the unload_heads attribute will return 0.
 
 For example, do the following in order to park the heads of drive
-/dev/sda and stop all I/O operations for five seconds:
+/dev/sda and stop all I/O operations for five seconds::
 
-# echo 5000 > /sys/block/sda/device/unload_heads
+	# echo 5000 > /sys/block/sda/device/unload_heads
 
-A simple
+A simple::
 
-# cat /sys/block/sda/device/unload_heads
+	# cat /sys/block/sda/device/unload_heads
 
 will show you how many milliseconds are left before normal operation
 will be resumed.
@@ -112,9 +113,9 @@ unload_heads attribute. If you know that your device really does
 support the unload feature (for instance, because the vendor of your
 laptop or the hard drive itself told you so), then you can tell the
 kernel to enable the usage of this feature for that drive by writing
-the special value -1 to the unload_heads attribute:
+the special value -1 to the unload_heads attribute::
 
-# echo -1 > /sys/block/sda/device/unload_heads
+	# echo -1 > /sys/block/sda/device/unload_heads
 
 will enable the feature for /dev/sda, and giving -2 instead of -1 will
 disable it again.
@@ -135,6 +136,7 @@ for use. Please feel free to add projects that have been the victims
 of my ignorance.
 
 - http://www.thinkwiki.org/wiki/HDAPS
+
   See this page for information about Linux support of the hard disk
   active protection system as implemented in IBM/Lenovo Thinkpads.
 
diff --git a/Documentation/admin-guide/laptops/index.rst b/Documentation/admin-guide/laptops/index.rst
new file mode 100644
index 000000000000..cd9a1c2695fd
--- /dev/null
+++ b/Documentation/admin-guide/laptops/index.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+Laptop Drivers
+==============
+
+.. toctree::
+   :maxdepth: 1
+
+   asus-laptop
+   disk-shock-protection
+   laptop-mode
+   lg-laptop
+   sony-laptop
+   sonypi
+   thinkpad-acpi
+   toshiba_haps
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/admin-guide/laptops/laptop-mode.rst
index 1c707fc9b141..c984c4262f2e 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/admin-guide/laptops/laptop-mode.rst
@@ -1,8 +1,11 @@
+===============================================
 How to conserve battery power using laptop-mode
------------------------------------------------
+===============================================
 
 Document Author: Bart Samwel (bart@samwel.tk)
+
 Date created: January 2, 2004
+
 Last modified: December 06, 2004
 
 Introduction
@@ -12,17 +15,16 @@ Laptop mode is used to minimize the time that the hard disk needs to be spun up,
 to conserve battery power on laptops. It has been reported to cause significant
 power savings.
 
-Contents
---------
+.. Contents
 
-* Introduction
-* Installation
-* Caveats
-* The Details
-* Tips & Tricks
-* Control script
-* ACPI integration
-* Monitoring tool
+   * Introduction
+   * Installation
+   * Caveats
+   * The Details
+   * Tips & Tricks
+   * Control script
+   * ACPI integration
+   * Monitoring tool
 
 
 Installation
@@ -33,7 +35,7 @@ or anything. Simply install all the files included in this document, and
 laptop mode will automatically be started when you're on battery. For
 your convenience, a tarball containing an installer can be downloaded at:
 
-http://www.samwel.tk/laptop_mode/laptop_mode/
+	http://www.samwel.tk/laptop_mode/laptop_mode/
 
 To configure laptop mode, you need to edit the configuration file, which is
 located in /etc/default/laptop-mode on Debian-based systems, or in
@@ -209,7 +211,7 @@ Tips & Tricks
   this on powerbooks too. I hope that this is a piece of information that
   might be useful to the Laptop Mode patch or its users."
 
-* In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the
+* In syslog.conf, you can prefix entries with a dash `-` to omit syncing the
   file after every logging. When you're using laptop-mode and your disk doesn't
   spin down, this is a likely culprit.
 
@@ -233,83 +235,82 @@ configuration file
 It should be installed as /etc/default/laptop-mode on Debian, and as
 /etc/sysconfig/laptop-mode on Red Hat, SUSE, Mandrake, and other work-alikes.
 
---------------------CONFIG FILE BEGIN-------------------------------------------
-# Maximum time, in seconds, of hard drive spindown time that you are
-# comfortable with. Worst case, it's possible that you could lose this
-# amount of work if your battery fails you while in laptop mode.
-#MAX_AGE=600
-
-# Automatically disable laptop mode when the number of minutes of battery
-# that you have left goes below this threshold.
-MINIMUM_BATTERY_MINUTES=10
-
-# Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
-# by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
-# will read a complete MP3 at once, and will then spin down while the MP3/OGG is
-# playing.
-#READAHEAD=4096
-
-# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
-#DO_REMOUNTS=1
-
-# And shall we add the "noatime" option to that as well? (1=yes)
-#DO_REMOUNT_NOATIME=1
-
-# Dirty synchronous ratio.  At this percentage of dirty pages the process
-# which
-# calls write() does its own writeback
-#DIRTY_RATIO=40
-
-#
-# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
-#
-#DIRTY_BACKGROUND_RATIO=5
-
-# kernel default dirty buffer age
-#DEF_AGE=30
-#DEF_UPDATE=5
-#DEF_DIRTY_BACKGROUND_RATIO=10
-#DEF_DIRTY_RATIO=40
-#DEF_XFS_AGE_BUFFER=15
-#DEF_XFS_SYNC_INTERVAL=30
-#DEF_XFS_BUFD_INTERVAL=1
-
-# This must be adjusted manually to the value of HZ in the running kernel
-# on 2.4, until the XFS people change their 2.4 external interfaces to work in
-# centisecs. This can be automated, but it's a work in progress that still
-# needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
-# external interfaces, and that is currently always set to 100. So you don't
-# need to change this on 2.6.
-#XFS_HZ=100
-
-# Should the maximum CPU frequency be adjusted down while on battery?
-# Requires CPUFreq to be setup.
-# See Documentation/admin-guide/pm/cpufreq.rst for more info
-#DO_CPU=0
-
-# When on battery what is the maximum CPU speed that the system should
-# use? Legal values are "slowest" for the slowest speed that your
-# CPU is able to operate at, or a value listed in:
-# /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
-# Only applicable if DO_CPU=1.
-#CPU_MAXFREQ=slowest
-
-# Idle timeout for your hard drive (man hdparm for valid values, -S option)
-# Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
-#AC_HD=244
-#BATT_HD=4
-
-# The drives for which to adjust the idle timeout. Separate them by a space,
-# e.g. HD="/dev/hda /dev/hdb".
-#HD="/dev/hda"
-
-# Set the spindown timeout on a hard drive?
-#DO_HD=1
-
---------------------CONFIG FILE END---------------------------------------------
+Config file::
+
+  # Maximum time, in seconds, of hard drive spindown time that you are
+  # comfortable with. Worst case, it's possible that you could lose this
+  # amount of work if your battery fails you while in laptop mode.
+  #MAX_AGE=600
+
+  # Automatically disable laptop mode when the number of minutes of battery
+  # that you have left goes below this threshold.
+  MINIMUM_BATTERY_MINUTES=10
+
+  # Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
+  # by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
+  # will read a complete MP3 at once, and will then spin down while the MP3/OGG is
+  # playing.
+  #READAHEAD=4096
+
+  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
+  #DO_REMOUNTS=1
+
+  # And shall we add the "noatime" option to that as well? (1=yes)
+  #DO_REMOUNT_NOATIME=1
+
+  # Dirty synchronous ratio.  At this percentage of dirty pages the process
+  # which
+  # calls write() does its own writeback
+  #DIRTY_RATIO=40
+
+  #
+  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
+  # exceeded, the kernel will wake flusher threads which will then reduce the
+  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+  # so once some writeout has commenced, we do a lot of it.
+  #
+  #DIRTY_BACKGROUND_RATIO=5
+
+  # kernel default dirty buffer age
+  #DEF_AGE=30
+  #DEF_UPDATE=5
+  #DEF_DIRTY_BACKGROUND_RATIO=10
+  #DEF_DIRTY_RATIO=40
+  #DEF_XFS_AGE_BUFFER=15
+  #DEF_XFS_SYNC_INTERVAL=30
+  #DEF_XFS_BUFD_INTERVAL=1
+
+  # This must be adjusted manually to the value of HZ in the running kernel
+  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
+  # centisecs. This can be automated, but it's a work in progress that still
+  # needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
+  # external interfaces, and that is currently always set to 100. So you don't
+  # need to change this on 2.6.
+  #XFS_HZ=100
+
+  # Should the maximum CPU frequency be adjusted down while on battery?
+  # Requires CPUFreq to be setup.
+  # See Documentation/admin-guide/pm/cpufreq.rst for more info
+  #DO_CPU=0
+
+  # When on battery what is the maximum CPU speed that the system should
+  # use? Legal values are "slowest" for the slowest speed that your
+  # CPU is able to operate at, or a value listed in:
+  # /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
+  # Only applicable if DO_CPU=1.
+  #CPU_MAXFREQ=slowest
+
+  # Idle timeout for your hard drive (man hdparm for valid values, -S option)
+  # Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
+  #AC_HD=244
+  #BATT_HD=4
+
+  # The drives for which to adjust the idle timeout. Separate them by a space,
+  # e.g. HD="/dev/hda /dev/hdb".
+  #HD="/dev/hda"
+
+  # Set the spindown timeout on a hard drive?
+  #DO_HD=1
 
 
 Control script
@@ -318,125 +319,126 @@ Control script
 Please note that this control script works for the Linux 2.4 and 2.6 series (thanks
 to Kiko Piris).
 
---------------------CONTROL SCRIPT BEGIN----------------------------------------
-#!/bin/bash
-
-# start or stop laptop_mode, best run by a power management daemon when
-# ac gets connected/disconnected from a laptop
-#
-# install as /sbin/laptop_mode
-#
-# Contributors to this script:   Kiko Piris
-#				 Bart Samwel
-#				 Micha Feigin
-#				 Andrew Morton
-#				 Herve Eychenne
-#				 Dax Kelson
-#
-# Original Linux 2.4 version by: Jens Axboe
-
-#############################################################################
-
-# Source config
-if [ -f /etc/default/laptop-mode ] ; then
+Control script::
+
+  #!/bin/bash
+
+  # start or stop laptop_mode, best run by a power management daemon when
+  # ac gets connected/disconnected from a laptop
+  #
+  # install as /sbin/laptop_mode
+  #
+  # Contributors to this script:   Kiko Piris
+  #				 Bart Samwel
+  #				 Micha Feigin
+  #				 Andrew Morton
+  #				 Herve Eychenne
+  #				 Dax Kelson
+  #
+  # Original Linux 2.4 version by: Jens Axboe
+
+  #############################################################################
+
+  # Source config
+  if [ -f /etc/default/laptop-mode ] ; then
 	# Debian
 	. /etc/default/laptop-mode
-elif [ -f /etc/sysconfig/laptop-mode ] ; then
+  elif [ -f /etc/sysconfig/laptop-mode ] ; then
 	# Others
-        . /etc/sysconfig/laptop-mode
-fi
-
-# Don't raise an error if the config file is incomplete
-# set defaults instead:
-
-# Maximum time, in seconds, of hard drive spindown time that you are
-# comfortable with. Worst case, it's possible that you could lose this
-# amount of work if your battery fails you while in laptop mode.
-MAX_AGE=${MAX_AGE:-'600'}
-
-# Read-ahead, in kilobytes
-READAHEAD=${READAHEAD:-'4096'}
-
-# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
-DO_REMOUNTS=${DO_REMOUNTS:-'1'}
-
-# And shall we add the "noatime" option to that as well? (1=yes)
-DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
-
-# Shall we adjust the idle timeout on a hard drive?
-DO_HD=${DO_HD:-'1'}
-
-# Adjust idle timeout on which hard drive?
-HD="${HD:-'/dev/hda'}"
-
-# spindown time for HD (hdparm -S values)
-AC_HD=${AC_HD:-'244'}
-BATT_HD=${BATT_HD:-'4'}
-
-# Dirty synchronous ratio.  At this percentage of dirty pages the process which
-# calls write() does its own writeback
-DIRTY_RATIO=${DIRTY_RATIO:-'40'}
-
-# cpu frequency scaling
-# See Documentation/admin-guide/pm/cpufreq.rst for more info
-DO_CPU=${CPU_MANAGE:-'0'}
-CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
-
-#
-# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
-#
-DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
-
-# kernel default dirty buffer age
-DEF_AGE=${DEF_AGE:-'30'}
-DEF_UPDATE=${DEF_UPDATE:-'5'}
-DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
-DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
-DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
-DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
-DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
-
-# This must be adjusted manually to the value of HZ in the running kernel
-# on 2.4, until the XFS people change their 2.4 external interfaces to work in
-# centisecs. This can be automated, but it's a work in progress that still needs
-# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
-# interfaces, and that is currently always set to 100. So you don't need to
-# change this on 2.6.
-XFS_HZ=${XFS_HZ:-'100'}
-
-#############################################################################
-
-KLEVEL="$(uname -r |
-             {
+          . /etc/sysconfig/laptop-mode
+  fi
+
+  # Don't raise an error if the config file is incomplete
+  # set defaults instead:
+
+  # Maximum time, in seconds, of hard drive spindown time that you are
+  # comfortable with. Worst case, it's possible that you could lose this
+  # amount of work if your battery fails you while in laptop mode.
+  MAX_AGE=${MAX_AGE:-'600'}
+
+  # Read-ahead, in kilobytes
+  READAHEAD=${READAHEAD:-'4096'}
+
+  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
+  DO_REMOUNTS=${DO_REMOUNTS:-'1'}
+
+  # And shall we add the "noatime" option to that as well? (1=yes)
+  DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
+
+  # Shall we adjust the idle timeout on a hard drive?
+  DO_HD=${DO_HD:-'1'}
+
+  # Adjust idle timeout on which hard drive?
+  HD="${HD:-'/dev/hda'}"
+
+  # spindown time for HD (hdparm -S values)
+  AC_HD=${AC_HD:-'244'}
+  BATT_HD=${BATT_HD:-'4'}
+
+  # Dirty synchronous ratio.  At this percentage of dirty pages the process which
+  # calls write() does its own writeback
+  DIRTY_RATIO=${DIRTY_RATIO:-'40'}
+
+  # cpu frequency scaling
+  # See Documentation/admin-guide/pm/cpufreq.rst for more info
+  DO_CPU=${CPU_MANAGE:-'0'}
+  CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
+
+  #
+  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
+  # exceeded, the kernel will wake flusher threads which will then reduce the
+  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+  # so once some writeout has commenced, we do a lot of it.
+  #
+  DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
+
+  # kernel default dirty buffer age
+  DEF_AGE=${DEF_AGE:-'30'}
+  DEF_UPDATE=${DEF_UPDATE:-'5'}
+  DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
+  DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
+  DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
+  DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
+  DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
+
+  # This must be adjusted manually to the value of HZ in the running kernel
+  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
+  # centisecs. This can be automated, but it's a work in progress that still needs
+  # some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
+  # interfaces, and that is currently always set to 100. So you don't need to
+  # change this on 2.6.
+  XFS_HZ=${XFS_HZ:-'100'}
+
+  #############################################################################
+
+  KLEVEL="$(uname -r |
+               {
 	       IFS='.' read a b c
 	       echo $a.$b
 	     }
-)"
-case "$KLEVEL" in
+  )"
+  case "$KLEVEL" in
 	"2.4"|"2.6")
 		;;
 	*)
 		echo "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
 		exit 1
 		;;
-esac
+  esac
 
-if [ ! -e /proc/sys/vm/laptop_mode ] ; then
+  if [ ! -e /proc/sys/vm/laptop_mode ] ; then
 	echo "Kernel is not patched with laptop_mode patch." >&2
 	exit 1
-fi
+  fi
 
-if [ ! -w /proc/sys/vm/laptop_mode ] ; then
+  if [ ! -w /proc/sys/vm/laptop_mode ] ; then
 	echo "You do not have enough privileges to enable laptop_mode." >&2
 	exit 1
-fi
+  fi
 
-# Remove an option (the first parameter) of the form option=<number> from
-# a mount options string (the rest of the parameters).
-parse_mount_opts () {
+  # Remove an option (the first parameter) of the form option=<number> from
+  # a mount options string (the rest of the parameters).
+  parse_mount_opts () {
 	OPT="$1"
 	shift
 	echo ",$*," | sed		\
@@ -444,11 +446,11 @@ parse_mount_opts () {
 	 -e 's/,,*/,/g'			\
 	 -e 's/^,//'			\
 	 -e 's/,$//'
-}
+  }
 
-# Remove an option (the first parameter) without any arguments from
-# a mount option string (the rest of the parameters).
-parse_nonumber_mount_opts () {
+  # Remove an option (the first parameter) without any arguments from
+  # a mount option string (the rest of the parameters).
+  parse_nonumber_mount_opts () {
 	OPT="$1"
 	shift
 	echo ",$*," | sed		\
@@ -456,20 +458,20 @@ parse_nonumber_mount_opts () {
 	 -e 's/,,*/,/g'			\
 	 -e 's/^,//'			\
 	 -e 's/,$//'
-}
-
-# Find out the state of a yes/no option (e.g. "atime"/"noatime") in
-# fstab for a given filesystem, and use this state to replace the
-# value of the option in another mount options string. The device
-# is the first argument, the option name the second, and the default
-# value the third. The remainder is the mount options string.
-#
-# Example:
-# parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
-#
-# If fstab contains, say, "rw" for this filesystem, then the result
-# will be "defaults,atime".
-parse_yesno_opts_wfstab () {
+  }
+
+  # Find out the state of a yes/no option (e.g. "atime"/"noatime") in
+  # fstab for a given filesystem, and use this state to replace the
+  # value of the option in another mount options string. The device
+  # is the first argument, the option name the second, and the default
+  # value the third. The remainder is the mount options string.
+  #
+  # Example:
+  # parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
+  #
+  # If fstab contains, say, "rw" for this filesystem, then the result
+  # will be "defaults,atime".
+  parse_yesno_opts_wfstab () {
 	L_DEV="$1"
 	OPT="$2"
 	DEF_OPT="$3"
@@ -491,21 +493,21 @@ parse_yesno_opts_wfstab () {
 		# option not specified in fstab -- choose the default.
 		echo "$PARSEDOPTS1,$DEF_OPT"
 	fi
-}
-
-# Find out the state of a numbered option (e.g. "commit=NNN") in
-# fstab for a given filesystem, and use this state to replace the
-# value of the option in another mount options string. The device
-# is the first argument, and the option name the second. The
-# remainder is the mount options string in which the replacement
-# must be done.
-#
-# Example:
-# parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
-#
-# If fstab contains, say, "commit=3,rw" for this filesystem, then the
-# result will be "rw,commit=3".
-parse_mount_opts_wfstab () {
+  }
+
+  # Find out the state of a numbered option (e.g. "commit=NNN") in
+  # fstab for a given filesystem, and use this state to replace the
+  # value of the option in another mount options string. The device
+  # is the first argument, and the option name the second. The
+  # remainder is the mount options string in which the replacement
+  # must be done.
+  #
+  # Example:
+  # parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
+  #
+  # If fstab contains, say, "commit=3,rw" for this filesystem, then the
+  # result will be "rw,commit=3".
+  parse_mount_opts_wfstab () {
 	L_DEV="$1"
 	OPT="$2"
 	shift 2
@@ -523,9 +525,9 @@ parse_mount_opts_wfstab () {
 		# option not specified in fstab: set it to 0
 		echo "$PARSEDOPTS1,$OPT=0"
 	fi
-}
+  }
 
-deduce_fstype () {
+  deduce_fstype () {
 	MP="$1"
 	# My root filesystem unfortunately has
 	# type "unknown" in /etc/mtab. If we encounter
@@ -538,13 +540,13 @@ deduce_fstype () {
 			exit 0
 		fi
 	done
-}
+  }
 
-if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
+  if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
 	NOATIME_OPT=",noatime"
-fi
+  fi
 
-case "$1" in
+  case "$1" in
 	start)
 		AGE=$((100*$MAX_AGE))
 		XFS_AGE=$(($XFS_HZ*$MAX_AGE))
@@ -687,10 +689,9 @@ case "$1" in
 		exit 1
 		;;
 
-esac
+  esac
 
-exit 0
---------------------CONTROL SCRIPT END------------------------------------------
+  exit 0
 
 
 ACPI integration
@@ -701,78 +702,76 @@ kick off the laptop_mode script and run hdparm. The part that
 automatically disables laptop mode when the battery is low was
 written by Jan Topinski.
 
------------------/etc/acpi/events/ac_adapter BEGIN------------------------------
-event=ac_adapter
-action=/etc/acpi/actions/ac.sh %e
-----------------/etc/acpi/events/ac_adapter END---------------------------------
+/etc/acpi/events/ac_adapter::
+
+	event=ac_adapter
+	action=/etc/acpi/actions/ac.sh %e
+
+/etc/acpi/events/battery::
 
+	event=battery.*
+	action=/etc/acpi/actions/battery.sh %e
 
------------------/etc/acpi/events/battery BEGIN---------------------------------
-event=battery.*
-action=/etc/acpi/actions/battery.sh %e
-----------------/etc/acpi/events/battery END------------------------------------
+/etc/acpi/actions/ac.sh::
 
+  #!/bin/bash
 
-----------------/etc/acpi/actions/ac.sh BEGIN-----------------------------------
-#!/bin/bash
+  # ac on/offline event handler
 
-# ac on/offline event handler
+  status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
 
-status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
+  case $status in
+          "on-line")
+                  /sbin/laptop_mode stop
+                  exit 0
+          ;;
+          "off-line")
+                  /sbin/laptop_mode start
+                  exit 0
+          ;;
+  esac
 
-case $status in
-        "on-line")
-                /sbin/laptop_mode stop
-                exit 0
-        ;;
-        "off-line")
-                /sbin/laptop_mode start
-                exit 0
-        ;;
-esac
----------------------------/etc/acpi/actions/ac.sh END--------------------------
 
+/etc/acpi/actions/battery.sh::
 
----------------------------/etc/acpi/actions/battery.sh BEGIN-------------------
-#! /bin/bash
+  #! /bin/bash
 
-# Automatically disable laptop mode when the battery almost runs out.
+  # Automatically disable laptop mode when the battery almost runs out.
 
-BATT_INFO=/proc/acpi/battery/$2/state
+  BATT_INFO=/proc/acpi/battery/$2/state
 
-if [[ -f /proc/sys/vm/laptop_mode ]]
-then
-   LM=`cat /proc/sys/vm/laptop_mode`
-   if [[ $LM -gt 0 ]]
-   then
-     if [[ -f $BATT_INFO ]]
+  if [[ -f /proc/sys/vm/laptop_mode ]]
+  then
+     LM=`cat /proc/sys/vm/laptop_mode`
+     if [[ $LM -gt 0 ]]
      then
-        # Source the config file only now that we know we need
-        if [ -f /etc/default/laptop-mode ] ; then
-                # Debian
-                . /etc/default/laptop-mode
-        elif [ -f /etc/sysconfig/laptop-mode ] ; then
-                # Others
-                . /etc/sysconfig/laptop-mode
-        fi
-        MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
-
-        ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
-        if [[ ACTION -eq "discharging" ]]
-        then
-           PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
-           REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
-        fi
-        if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
-        then
-           /sbin/laptop_mode stop
-        fi
-     else
-       logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
+       if [[ -f $BATT_INFO ]]
+       then
+          # Source the config file only now that we know we need
+          if [ -f /etc/default/laptop-mode ] ; then
+                  # Debian
+                  . /etc/default/laptop-mode
+          elif [ -f /etc/sysconfig/laptop-mode ] ; then
+                  # Others
+                  . /etc/sysconfig/laptop-mode
+          fi
+          MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
+
+          ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
+          if [[ ACTION -eq "discharging" ]]
+          then
+             PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
+             REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
+          fi
+          if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
+          then
+             /sbin/laptop_mode stop
+          fi
+       else
+         logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
+       fi
      fi
-   fi
-fi
----------------------------/etc/acpi/actions/battery.sh END--------------------
+  fi
 
 
 Monitoring tool
diff --git a/Documentation/laptops/lg-laptop.rst b/Documentation/admin-guide/laptops/lg-laptop.rst
index f2c2ffe31101..ce9b14671cb9 100644
--- a/Documentation/laptops/lg-laptop.rst
+++ b/Documentation/admin-guide/laptops/lg-laptop.rst
@@ -1,6 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-:orphan:
 
 LG Gram laptop extra features
 =============================
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/admin-guide/laptops/sony-laptop.rst
index 978b1e615155..9edcc7f6612f 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/admin-guide/laptops/sony-laptop.rst
@@ -1,7 +1,9 @@
+=========================================
 Sony Notebook Control Driver (SNC) Readme
------------------------------------------
-	Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
-	Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+=========================================
+
+	- Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
+	- Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
 
 This mini-driver drives the SNC and SPIC device present in the ACPI BIOS of the
 Sony Vaio laptops. This driver mixes both devices functions under the same
@@ -10,6 +12,7 @@ obsoleted by sony-laptop now.
 
 Fn keys (hotkeys):
 ------------------
+
 Some models report hotkeys through the SNC or SPIC devices, such events are
 reported both through the ACPI subsystem as acpi events and through the INPUT
 subsystem. See the logs of /proc/bus/input/devices to find out what those
@@ -28,11 +31,14 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
+
+	======================	=========================================
 	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
 	max_brightness		the maximum brightness value
+	======================	=========================================
 
 
 Platform specific:
@@ -45,6 +51,8 @@ You then read/write integer values from/to those files by using
 standard UNIX tools.
 
 The files are:
+
+	======================	==========================================
 	brightness_default	screen brightness which will be set
 				when the laptop will be rebooted
 	cdpower			power on/off the internal CD drive
@@ -53,21 +61,39 @@ The files are:
 				(only in debug mode)
 	bluetoothpower		power on/off the internal bluetooth device
 	fanspeed		get/set the fan speed
+	======================	==========================================
 
 Note that some files may be missing if they are not supported
 by your particular laptop model.
 
-Example usage:
+Example usage::
+
 	# echo "1" > /sys/devices/platform/sony-laptop/brightness_default
-sets the lowest screen brightness for the next and later reboots,
+
+sets the lowest screen brightness for the next and later reboots
+
+::
+
 	# echo "8" > /sys/devices/platform/sony-laptop/brightness_default
-sets the highest screen brightness for the next and later reboots,
+
+sets the highest screen brightness for the next and later reboots
+
+::
+
 	# cat /sys/devices/platform/sony-laptop/brightness_default
-retrieves the value.
+
+retrieves the value
+
+::
 
 	# echo "0" > /sys/devices/platform/sony-laptop/audiopower
-powers off the sound card,
+
+powers off the sound card
+
+::
+
 	# echo "1" > /sys/devices/platform/sony-laptop/audiopower
+
 powers on the sound card.
 
 
@@ -76,7 +102,8 @@ RFkill control:
 More recent Vaio models expose a consistent set of ACPI methods to
 control radio frequency emitting devices. If you are a lucky owner of
 such a laptop you will find the necessary rfkill devices under
-/sys/class/rfkill. Check those starting with sony-* in
+/sys/class/rfkill. Check those starting with sony-* in::
+
 	# grep . /sys/class/rfkill/*/{state,name}
 
 
@@ -88,26 +115,29 @@ you are not afraid of any side effects doing strange things with
 your ACPI BIOS could have on your laptop), load the driver and
 pass the option 'debug=1'.
 
-REPEAT: DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.
+REPEAT:
+	**DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.**
 
 In your kernel logs you will find the list of all ACPI methods
 the SNC device has on your laptop.
 
 * For new models you will see a long list of meaningless method names,
-reading the DSDT table source should reveal that:
+  reading the DSDT table source should reveal that:
+
 (1) the SNC device uses an internal capability lookup table
 (2) SN00 is used to find values in the lookup table
 (3) SN06 and SN07 are used to call into the real methods based on
     offsets you can obtain iterating the table using SN00
 (4) SN02 used to enable events.
+
 Some values in the capability lookup table are more or less known, see
 the code for all sony_call_snc_handle calls, others are more obscure.
 
 * For old models you can see the GCDP/GCDP methods used to pwer on/off
-the CD drive, but there are others and they are usually different from
-model to model.
+  the CD drive, but there are others and they are usually different from
+  model to model.
 
-I HAVE NO IDEA WHAT THOSE METHODS DO.
+**I HAVE NO IDEA WHAT THOSE METHODS DO.**
 
 The sony-laptop driver creates, for some of those methods (the most
 current ones found on several Vaio models), an entry under
diff --git a/Documentation/laptops/sonypi.txt b/Documentation/admin-guide/laptops/sonypi.rst
index 606bdb9ce036..c6eaaf48f7c1 100644
--- a/Documentation/laptops/sonypi.txt
+++ b/Documentation/admin-guide/laptops/sonypi.rst
@@ -1,11 +1,13 @@
+==================================================
 Sony Programmable I/O Control Device Driver Readme
---------------------------------------------------
-	Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
-	Copyright (C) 2001-2002 Alcôve <www.alcove.com>
-	Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
-	Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
-	Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
-	Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
+==================================================
+
+	- Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
+	- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+	- Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+	- Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+	- Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+	- Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
 
 This driver enables access to the Sony Programmable I/O Control Device which
 can be found in many Sony Vaio laptops. Some newer Sony laptops (seems to be
@@ -14,6 +16,7 @@ sonypi device and are not supported at all by this driver.
 
 It will give access (through a user space utility) to some events those laptops
 generate, like:
+
 	- jogdial events (the small wheel on the side of Vaios)
 	- capture button events (only on Vaio Picturebook series)
 	- Fn keys
@@ -49,7 +52,8 @@ module argument syntax (<param>=<value> when passing the option to the
 module or sonypi.<param>=<value> on the kernel boot line when sonypi is
 statically linked into the kernel). Those options are:
 
-	minor: 		minor number of the misc device /dev/sonypi,
+	=============== =======================================================
+	minor:		minor number of the misc device /dev/sonypi,
 			default is -1 (automatic allocation, see /proc/misc
 			or kernel logs)
 
@@ -85,17 +89,18 @@ statically linked into the kernel). Those options are:
 			set to 0xffffffff, meaning that all possible events
 			will be tried. You can use the following bits to
 			construct your own event mask (from
-			drivers/char/sonypi.h):
-				SONYPI_JOGGER_MASK 		0x0001
-				SONYPI_CAPTURE_MASK 		0x0002
-				SONYPI_FNKEY_MASK 		0x0004
-				SONYPI_BLUETOOTH_MASK 		0x0008
-				SONYPI_PKEY_MASK 		0x0010
-				SONYPI_BACK_MASK 		0x0020
-				SONYPI_HELP_MASK 		0x0040
-				SONYPI_LID_MASK 		0x0080
-				SONYPI_ZOOM_MASK 		0x0100
-				SONYPI_THUMBPHRASE_MASK 	0x0200
+			drivers/char/sonypi.h)::
+
+				SONYPI_JOGGER_MASK		0x0001
+				SONYPI_CAPTURE_MASK		0x0002
+				SONYPI_FNKEY_MASK		0x0004
+				SONYPI_BLUETOOTH_MASK		0x0008
+				SONYPI_PKEY_MASK		0x0010
+				SONYPI_BACK_MASK		0x0020
+				SONYPI_HELP_MASK		0x0040
+				SONYPI_LID_MASK			0x0080
+				SONYPI_ZOOM_MASK		0x0100
+				SONYPI_THUMBPHRASE_MASK		0x0200
 				SONYPI_MEYE_MASK		0x0400
 				SONYPI_MEMORYSTICK_MASK		0x0800
 				SONYPI_BATTERY_MASK		0x1000
@@ -105,17 +110,18 @@ statically linked into the kernel). Those options are:
 			created, one which interprets the jogdial events as
 			mouse events, the other one which acts like a
 			keyboard reporting the pressing of the special keys.
+	=============== =======================================================
 
 Module use:
 -----------
 
 In order to automatically load the sonypi module on use, you can put those
-lines a configuration file in /etc/modprobe.d/:
+lines a configuration file in /etc/modprobe.d/::
 
 	alias char-major-10-250 sonypi
 	options sonypi minor=250
 
-This supposes the use of minor 250 for the sonypi device:
+This supposes the use of minor 250 for the sonypi device::
 
 	# mknod /dev/sonypi c 10 250
 
@@ -148,5 +154,5 @@ Bugs:
 	  http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
 
 	- since all development was done by reverse engineering, there is
-	  _absolutely no guarantee_ that this driver will not crash your
+	  *absolutely no guarantee* that this driver will not crash your
 	  laptop. Permanently.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 75ef063622d2..adea0bf2acc5 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -1,12 +1,15 @@
-		     ThinkPad ACPI Extras Driver
+===========================
+ThinkPad ACPI Extras Driver
+===========================
 
-                            Version 0.25
-                        October 16th,  2013
+Version 0.25
 
-               Borislav Deianov <borislav@users.sf.net>
-             Henrique de Moraes Holschuh <hmh@hmh.eng.br>
-                      http://ibm-acpi.sf.net/
+October 16th,  2013
 
+- Borislav Deianov <borislav@users.sf.net>
+- Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+
+http://ibm-acpi.sf.net/
 
 This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
 supports various features of these laptops which are accessible
@@ -91,7 +94,8 @@ yet ready or stabilized, it is expected that this interface will change,
 and any and all userspace programs must deal with it.
 
 
-Notes about the sysfs interface:
+Notes about the sysfs interface
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Unlike what was done with the procfs interface, correctness when talking
 to the sysfs interfaces will be enforced, as will correctness in the
@@ -129,6 +133,7 @@ Driver version
 --------------
 
 procfs: /proc/acpi/ibm/driver
+
 sysfs driver attribute: version
 
 The driver name and version. No commands can be written to this file.
@@ -141,9 +146,13 @@ sysfs driver attribute: interface_version
 
 Version of the thinkpad-acpi sysfs interface, as an unsigned long
 (output in hex format: 0xAAAABBCC), where:
-	AAAA - major revision
-	BB - minor revision
-	CC - bugfix revision
+
+	AAAA
+	  - major revision
+	BB
+	  - minor revision
+	CC
+	  - bugfix revision
 
 The sysfs interface version changelog for the driver can be found at the
 end of this document.  Changes to the sysfs interface done by the kernel
@@ -170,6 +179,7 @@ Hot keys
 --------
 
 procfs: /proc/acpi/ibm/hotkey
+
 sysfs device attribute: hotkey_*
 
 In a ThinkPad, the ACPI HKEY handler is responsible for communicating
@@ -181,7 +191,7 @@ firmware will behave in many situations.
 The driver enables the HKEY ("hot key") event reporting automatically
 when loaded, and disables it when it is removed.
 
-The driver will report HKEY events in the following format:
+The driver will report HKEY events in the following format::
 
 	ibm/hotkey HKEY 00000080 0000xxxx
 
@@ -217,9 +227,10 @@ ThinkPads, it is still possible to support some extra hotkeys by
 polling the "CMOS NVRAM" at least 10 times per second.  The driver
 attempts to enables this functionality automatically when required.
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
-The following commands can be written to the /proc/acpi/ibm/hotkey file:
+The following commands can be written to the /proc/acpi/ibm/hotkey file::
 
 	echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
 	echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
@@ -227,7 +238,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
 	echo reset > /proc/acpi/ibm/hotkey -- restore the recommended mask
 
 The following commands have been deprecated and will cause the kernel
-to log a warning:
+to log a warning::
 
 	echo enable > /proc/acpi/ibm/hotkey -- does nothing
 	echo disable > /proc/acpi/ibm/hotkey -- returns an error
@@ -237,7 +248,8 @@ maintain maximum bug-to-bug compatibility, it does not report any masks,
 nor does it allow one to manipulate the hot key mask when the firmware
 does not support masks at all, even if NVRAM polling is in use.
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 	hotkey_bios_enabled:
 		DEPRECATED, WILL BE REMOVED SOON.
@@ -349,7 +361,8 @@ sysfs notes:
 
 		This attribute has poll()/select() support.
 
-input layer notes:
+input layer notes
+^^^^^^^^^^^^^^^^^
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
 followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
@@ -362,11 +375,13 @@ remapping KEY_UNKNOWN keys.
 
 The events are available in an input device, with the following id:
 
-	Bus:		BUS_HOST
-	vendor:		0x1014 (PCI_VENDOR_ID_IBM)  or
+	==============  ==============================
+	Bus		BUS_HOST
+	vendor		0x1014 (PCI_VENDOR_ID_IBM)  or
 			0x17aa (PCI_VENDOR_ID_LENOVO)
-	product:	0x5054 ("TP")
-	version:	0x4101
+	product		0x5054 ("TP")
+	version		0x4101
+	==============  ==============================
 
 The version will have its LSB incremented if the keymap changes in a
 backwards-compatible way.  The MSB shall always be 0x41 for this input
@@ -380,9 +395,10 @@ backwards-compatible change for this input device.
 
 Thinkpad-acpi Hot Key event map (version 0x4101):
 
+=======	=======	==============	==============================================
 ACPI	Scan
 event	code	Key		Notes
-
+=======	=======	==============	==============================================
 0x1001	0x00	FN+F1		-
 
 0x1002	0x01	FN+F2		IBM: battery (rare)
@@ -426,7 +442,9 @@ event	code	Key		Notes
 				or toggle screen expand
 
 0x1009	0x08	FN+F9		-
-	..	..		..
+
+...	...	...		...
+
 0x100B	0x0A	FN+F11		-
 
 0x100C	0x0B	FN+F12		Sleep to disk.  You are always
@@ -480,8 +498,11 @@ event	code	Key		Notes
 0x1018	0x17	THINKPAD	ThinkPad/Access IBM/Lenovo key
 
 0x1019	0x18	unknown
-..	..	..
+
+...	...	...
+
 0x1020	0x1F	unknown
+=======	=======	==============	==============================================
 
 The ThinkPad firmware does not allow one to differentiate when most hot
 keys are pressed or released (either that, or we don't know how to, yet).
@@ -499,14 +520,17 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
+==============	==============================================
 SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
+==============	==============================================
 
-Non hotkey ACPI HKEY event map:
--------------------------------
+Non hotkey ACPI HKEY event map
+------------------------------
 
 Events that are never propagated by the driver:
 
+======		==================================================
 0x2304		System is waking up from suspend to undock
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
@@ -519,10 +543,12 @@ Events that are never propagated by the driver:
 0x6000		KEYBOARD: Numlock key pressed
 0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 0x7000		Radio Switch may have changed state
+======		==================================================
 
 
 Events that are propagated by the driver to userspace:
 
+======		=====================================================
 0x2313		ALARM: System is waking up from suspend because
 		the battery is nearly empty
 0x2413		ALARM: System is waking up from hibernation because
@@ -544,6 +570,7 @@ Events that are propagated by the driver to userspace:
 0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 0x60C0		X1 Yoga 2016, Tablet mode status changed
 0x60F0		Thermal Transformation changed (GMTS, Windows)
+======		=====================================================
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown
@@ -562,7 +589,8 @@ cycle, or a system shutdown.  Obviously, something is very wrong if this
 happens.
 
 
-Brightness hotkey notes:
+Brightness hotkey notes
+^^^^^^^^^^^^^^^^^^^^^^^
 
 Don't mess with the brightness hotkeys in a Thinkpad.  If you want
 notifications for OSD, use the sysfs backlight class event support.
@@ -579,7 +607,9 @@ Bluetooth
 ---------
 
 procfs: /proc/acpi/ibm/bluetooth
+
 sysfs device attribute: bluetooth_enable (deprecated)
+
 sysfs rfkill class: switch "tpacpi_bluetooth_sw"
 
 This feature shows the presence and current state of a ThinkPad
@@ -588,36 +618,39 @@ Bluetooth device in the internal ThinkPad CDC slot.
 If the ThinkPad supports it, the Bluetooth state is stored in NVRAM,
 so it is kept across reboots and power-off.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-If Bluetooth is installed, the following commands can be used:
+If Bluetooth is installed, the following commands can be used::
 
 	echo enable > /proc/acpi/ibm/bluetooth
 	echo disable > /proc/acpi/ibm/bluetooth
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	If the Bluetooth CDC card is installed, it can be enabled /
 	disabled through the "bluetooth_enable" thinkpad-acpi device
 	attribute, and its current status can also be queried.
 
 	enable:
-		0: disables Bluetooth / Bluetooth is disabled
-		1: enables Bluetooth / Bluetooth is enabled.
+
+		- 0: disables Bluetooth / Bluetooth is disabled
+		- 1: enables Bluetooth / Bluetooth is enabled.
 
 	Note: this interface has been superseded by the	generic rfkill
 	class.  It has been deprecated, and it will be removed in year
 	2010.
 
 	rfkill controller switch "tpacpi_bluetooth_sw": refer to
-	Documentation/rfkill.txt for details.
+	Documentation/driver-api/rfkill.rst for details.
 
 
 Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
 
 This feature allows control over the devices used for video output -
-LCD, CRT or DVI (if available). The following commands are available:
+LCD, CRT or DVI (if available). The following commands are available::
 
 	echo lcd_enable > /proc/acpi/ibm/video
 	echo lcd_disable > /proc/acpi/ibm/video
@@ -630,9 +663,10 @@ LCD, CRT or DVI (if available). The following commands are available:
 	echo expand_toggle > /proc/acpi/ibm/video
 	echo video_switch > /proc/acpi/ibm/video
 
-NOTE: Access to this feature is restricted to processes owning the
-CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
-enough with some versions of X.org to crash it.
+NOTE:
+  Access to this feature is restricted to processes owning the
+  CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
+  enough with some versions of X.org to crash it.
 
 Each video output device can be enabled or disabled individually.
 Reading /proc/acpi/ibm/video shows the status of each device.
@@ -665,18 +699,21 @@ ThinkLight control
 ------------------
 
 procfs: /proc/acpi/ibm/light
+
 sysfs attributes: as per LED class, for the "tpacpi::thinklight" LED
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
 The ThinkLight status can be read and set through the procfs interface.  A
 few models which do not make the status available will show the ThinkLight
-status as "unknown". The available commands are:
+status as "unknown". The available commands are::
 
 	echo on  > /proc/acpi/ibm/light
 	echo off > /proc/acpi/ibm/light
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 The ThinkLight sysfs interface is documented by the LED class
 documentation, in Documentation/leds/leds-class.rst.  The ThinkLight LED name
@@ -691,6 +728,7 @@ CMOS/UCMS control
 -----------------
 
 procfs: /proc/acpi/ibm/cmos
+
 sysfs device attribute: cmos_command
 
 This feature is mostly used internally by the ACPI firmware to keep the legacy
@@ -707,16 +745,16 @@ The range of valid cmos command numbers is 0 to 21, but not all have an
 effect and the behavior varies from model to model.  Here is the behavior
 on the X40 (tpb is the ThinkPad Buttons utility):
 
-	0 - Related to "Volume down" key press
-	1 - Related to "Volume up" key press
-	2 - Related to "Mute on" key press
-	3 - Related to "Access IBM" key press
-	4 - Related to "LCD brightness up" key press
-	5 - Related to "LCD brightness down" key press
-	11 - Related to "toggle screen expansion" key press/function
-	12 - Related to "ThinkLight on"
-	13 - Related to "ThinkLight off"
-	14 - Related to "ThinkLight" key press (toggle ThinkLight)
+	- 0 - Related to "Volume down" key press
+	- 1 - Related to "Volume up" key press
+	- 2 - Related to "Mute on" key press
+	- 3 - Related to "Access IBM" key press
+	- 4 - Related to "LCD brightness up" key press
+	- 5 - Related to "LCD brightness down" key press
+	- 11 - Related to "toggle screen expansion" key press/function
+	- 12 - Related to "ThinkLight on"
+	- 13 - Related to "ThinkLight off"
+	- 14 - Related to "ThinkLight" key press (toggle ThinkLight)
 
 The cmos command interface is prone to firmware split-brain problems, as
 in newer ThinkPads it is just a compatibility layer.  Do not use it, it is
@@ -748,9 +786,10 @@ are aware of the consequences are welcome to enabling it.
 Audio mute and microphone mute LEDs are supported, but currently not
 visible to userspace. They are used by the snd-hda-intel audio driver.
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
-The available commands are:
+The available commands are::
 
 	echo '<LED number> on' >/proc/acpi/ibm/led
 	echo '<LED number> off' >/proc/acpi/ibm/led
@@ -760,23 +799,24 @@ The <LED number> range is 0 to 15. The set of LEDs that can be
 controlled varies from model to model. Here is the common ThinkPad
 mapping:
 
-	0 - power
-	1 - battery (orange)
-	2 - battery (green)
-	3 - UltraBase/dock
-	4 - UltraBay
-	5 - UltraBase battery slot
-	6 - (unknown)
-	7 - standby
-	8 - dock status 1
-	9 - dock status 2
-	10, 11 - (unknown)
-	12 - thinkvantage
-	13, 14, 15 - (unknown)
+	- 0 - power
+	- 1 - battery (orange)
+	- 2 - battery (green)
+	- 3 - UltraBase/dock
+	- 4 - UltraBay
+	- 5 - UltraBase battery slot
+	- 6 - (unknown)
+	- 7 - standby
+	- 8 - dock status 1
+	- 9 - dock status 2
+	- 10, 11 - (unknown)
+	- 12 - thinkvantage
+	- 13, 14, 15 - (unknown)
 
 All of the above can be turned on and off and can be made to blink.
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 The ThinkPad LED sysfs interface is described in detail by the LED class
 documentation, in Documentation/leds/leds-class.rst.
@@ -815,7 +855,7 @@ The BEEP method is used internally by the ACPI firmware to provide
 audible alerts in various situations. This feature allows the same
 sounds to be triggered manually.
 
-The commands are non-negative integer numbers:
+The commands are non-negative integer numbers::
 
 	echo <number> >/proc/acpi/ibm/beep
 
@@ -823,25 +863,26 @@ The valid <number> range is 0 to 17. Not all numbers trigger sounds
 and the sounds vary from model to model. Here is the behavior on the
 X40:
 
-	0 - stop a sound in progress (but use 17 to stop 16)
-	2 - two beeps, pause, third beep ("low battery")
-	3 - single beep
-	4 - high, followed by low-pitched beep ("unable")
-	5 - single beep
-	6 - very high, followed by high-pitched beep ("AC/DC")
-	7 - high-pitched beep
-	9 - three short beeps
-	10 - very long beep
-	12 - low-pitched beep
-	15 - three high-pitched beeps repeating constantly, stop with 0
-	16 - one medium-pitched beep repeating constantly, stop with 17
-	17 - stop 16
+	- 0 - stop a sound in progress (but use 17 to stop 16)
+	- 2 - two beeps, pause, third beep ("low battery")
+	- 3 - single beep
+	- 4 - high, followed by low-pitched beep ("unable")
+	- 5 - single beep
+	- 6 - very high, followed by high-pitched beep ("AC/DC")
+	- 7 - high-pitched beep
+	- 9 - three short beeps
+	- 10 - very long beep
+	- 12 - low-pitched beep
+	- 15 - three high-pitched beeps repeating constantly, stop with 0
+	- 16 - one medium-pitched beep repeating constantly, stop with 17
+	- 17 - stop 16
 
 
 Temperature sensors
 -------------------
 
 procfs: /proc/acpi/ibm/thermal
+
 sysfs device attributes: (hwmon "thinkpad") temp*_input
 
 Most ThinkPads include six or more separate temperature sensors but only
@@ -850,10 +891,14 @@ feature shows readings from up to eight different sensors on older
 ThinkPads, and up to sixteen different sensors on newer ThinkPads.
 
 For example, on the X40, a typical output may be:
-temperatures:   42 42 45 41 36 -128 33 -128
+
+temperatures:
+	42 42 45 41 36 -128 33 -128
 
 On the T43/p, a typical output may be:
-temperatures:   48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
+
+temperatures:
+	48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
 
 The mapping of thermal sensors to physical locations varies depending on
 system-board model (and thus, on ThinkPad model).
@@ -863,46 +908,53 @@ tries to track down these locations for various models.
 
 Most (newer?) models seem to follow this pattern:
 
-1:  CPU
-2:  (depends on model)
-3:  (depends on model)
-4:  GPU
-5:  Main battery: main sensor
-6:  Bay battery: main sensor
-7:  Main battery: secondary sensor
-8:  Bay battery: secondary sensor
-9-15: (depends on model)
+- 1:  CPU
+- 2:  (depends on model)
+- 3:  (depends on model)
+- 4:  GPU
+- 5:  Main battery: main sensor
+- 6:  Bay battery: main sensor
+- 7:  Main battery: secondary sensor
+- 8:  Bay battery: secondary sensor
+- 9-15: (depends on model)
 
 For the R51 (source: Thomas Gruber):
-2:  Mini-PCI
-3:  Internal HDD
+
+- 2:  Mini-PCI
+- 3:  Internal HDD
 
 For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
 http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
-2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
-3:  PCMCIA slot
-9:  MCH (northbridge) to DRAM Bus
-10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
-    card, under touchpad
-11: Power regulator, underside of system board, below F2 key
+
+- 2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
+- 3:  PCMCIA slot
+- 9:  MCH (northbridge) to DRAM Bus
+- 10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
+      card, under touchpad
+- 11: Power regulator, underside of system board, below F2 key
 
 The A31 has a very atypical layout for the thermal sensors
 (source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
-1:  CPU
-2:  Main Battery: main sensor
-3:  Power Converter
-4:  Bay Battery: main sensor
-5:  MCH (northbridge)
-6:  PCMCIA/ambient
-7:  Main Battery: secondary sensor
-8:  Bay Battery: secondary sensor
 
+- 1:  CPU
+- 2:  Main Battery: main sensor
+- 3:  Power Converter
+- 4:  Bay Battery: main sensor
+- 5:  MCH (northbridge)
+- 6:  PCMCIA/ambient
+- 7:  Main Battery: secondary sensor
+- 8:  Bay Battery: secondary sensor
+
+
+Procfs notes
+^^^^^^^^^^^^
 
-Procfs notes:
 	Readings from sensors that are not available return -128.
 	No commands can be written to this file.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
+
 	Sensors that are not available return the ENXIO error.  This
 	status may change at runtime, as there are hotplug thermal
 	sensors, like those inside the batteries and docks.
@@ -921,6 +973,7 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec
 
 Use it to determine the register holding the fan
 speed on some models. To do that, do the following:
+
 	- make sure the battery is fully charged
 	- make sure the fan is running
 	- use above mentioned tool to read out the EC
@@ -941,6 +994,7 @@ LCD brightness control
 ----------------------
 
 procfs: /proc/acpi/ibm/brightness
+
 sysfs backlight device "thinkpad_screen"
 
 This feature allows software control of the LCD brightness on ThinkPad
@@ -985,15 +1039,17 @@ brightness_enable=0 forces it to be disabled.  brightness_enable=1
 forces it to be enabled when available, even if the standard ACPI
 interface is also available.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-	The available commands are:
+The available commands are::
 
 	echo up   >/proc/acpi/ibm/brightness
 	echo down >/proc/acpi/ibm/brightness
 	echo 'level <level>' >/proc/acpi/ibm/brightness
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 The interface is implemented through the backlight sysfs class, which is
 poorly documented at this time.
@@ -1038,6 +1094,7 @@ Volume control (Console Audio control)
 --------------------------------------
 
 procfs: /proc/acpi/ibm/volume
+
 ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
 
 NOTE: by default, the volume control interface operates in read-only
@@ -1053,7 +1110,8 @@ Software volume control should be done only in the main AC97/HDA
 mixer.
 
 
-About the ThinkPad Console Audio control:
+About the ThinkPad Console Audio control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 ThinkPads have a built-in amplifier and muting circuit that drives the
 console headphone and speakers.  This circuit is after the main AC97
@@ -1092,13 +1150,14 @@ normal key presses to the operating system (thinkpad-acpi is not
 involved).
 
 
-The ThinkPad-ACPI volume control:
+The ThinkPad-ACPI volume control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The preferred way to interact with the Console Audio control is the
 ALSA interface.
 
 The legacy procfs interface allows one to read the current state,
-and if volume control is enabled, accepts the following commands:
+and if volume control is enabled, accepts the following commands::
 
 	echo up   >/proc/acpi/ibm/volume
 	echo down >/proc/acpi/ibm/volume
@@ -1137,13 +1196,15 @@ Fan control and monitoring: fan speed, fan enable/disable
 ---------------------------------------------------------
 
 procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
-			  pwm1_enable, fan2_input
+
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, pwm1_enable, fan2_input
+
 sysfs hwmon driver attributes: fan_watchdog
 
-NOTE NOTE NOTE: fan control operations are disabled by default for
-safety reasons.  To enable them, the module parameter "fan_control=1"
-must be given to thinkpad-acpi.
+NOTE NOTE NOTE:
+   fan control operations are disabled by default for
+   safety reasons.  To enable them, the module parameter "fan_control=1"
+   must be given to thinkpad-acpi.
 
 This feature attempts to show the current fan speed, control mode and
 other fan data that might be available.  The speed is read directly
@@ -1154,7 +1215,8 @@ value on other models.
 Some Lenovo ThinkPads support a secondary fan.  This fan cannot be
 controlled separately, it shares the main fan control.
 
-Fan levels:
+Fan levels
+^^^^^^^^^^
 
 Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
 stops the fan.  The higher the level, the higher the fan speed, although
@@ -1209,9 +1271,10 @@ therefore, not suitable to protect against fan mode changes made through
 means other than the "enable", "disable", and "level" procfs fan
 commands, or the hwmon fan control sysfs interface.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-The fan may be enabled or disabled with the following commands:
+The fan may be enabled or disabled with the following commands::
 
 	echo enable  >/proc/acpi/ibm/fan
 	echo disable >/proc/acpi/ibm/fan
@@ -1219,7 +1282,7 @@ The fan may be enabled or disabled with the following commands:
 Placing a fan on level 0 is the same as disabling it.  Enabling a fan
 will try to place it in a safe level if it is too slow or disabled.
 
-The fan level can be controlled with the command:
+The fan level can be controlled with the command::
 
 	echo 'level <level>' > /proc/acpi/ibm/fan
 
@@ -1231,7 +1294,7 @@ compatibility.
 
 On the X31 and X40 (and ONLY on those models), the fan speed can be
 controlled to a certain degree.  Once the fan is running, it can be
-forced to run faster or slower with the following command:
+forced to run faster or slower with the following command::
 
 	echo 'speed <speed>' > /proc/acpi/ibm/fan
 
@@ -1241,13 +1304,14 @@ effect or the fan speed eventually settles somewhere in that range.  The
 fan cannot be stopped or started with this command.  This functionality
 is incomplete, and not available through the sysfs interface.
 
-To program the safety watchdog, use the "watchdog" command.
+To program the safety watchdog, use the "watchdog" command::
 
 	echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
 
 If you want to disable the watchdog, use 0 as the interval.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 The sysfs interface follows the hwmon subsystem guidelines for the most
 part, and the exception is the fan safety watchdog.
@@ -1261,10 +1325,10 @@ to the firmware).
 Features not yet implemented by the driver return ENOSYS.
 
 hwmon device attribute pwm1_enable:
-	0: PWM offline (fan is set to full-speed mode)
-	1: Manual PWM control (use pwm1 to set fan level)
-	2: Hardware PWM control (EC "auto" mode)
-	3: reserved (Software PWM control, not implemented yet)
+	- 0: PWM offline (fan is set to full-speed mode)
+	- 1: Manual PWM control (use pwm1 to set fan level)
+	- 2: Hardware PWM control (EC "auto" mode)
+	- 3: reserved (Software PWM control, not implemented yet)
 
 	Modes 0 and 2 are not supported by all ThinkPads, and the
 	driver is not always able to detect this.  If it does know a
@@ -1304,7 +1368,9 @@ WAN
 ---
 
 procfs: /proc/acpi/ibm/wan
+
 sysfs device attribute: wwan_enable (deprecated)
+
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
 This feature shows the presence and current state of the built-in
@@ -1316,29 +1382,31 @@ so it is kept across reboots and power-off.
 It was tested on a Lenovo ThinkPad X60. It should probably work on other
 ThinkPad models which come with this module installed.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-If the W-WAN card is installed, the following commands can be used:
+If the W-WAN card is installed, the following commands can be used::
 
 	echo enable > /proc/acpi/ibm/wan
 	echo disable > /proc/acpi/ibm/wan
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	If the W-WAN card is installed, it can be enabled /
 	disabled through the "wwan_enable" thinkpad-acpi device
 	attribute, and its current status can also be queried.
 
 	enable:
-		0: disables WWAN card / WWAN card is disabled
-		1: enables WWAN card / WWAN card is enabled.
+		- 0: disables WWAN card / WWAN card is disabled
+		- 1: enables WWAN card / WWAN card is enabled.
 
 	Note: this interface has been superseded by the	generic rfkill
 	class.  It has been deprecated, and it will be removed in year
 	2010.
 
 	rfkill controller switch "tpacpi_wwan_sw": refer to
-	Documentation/rfkill.txt for details.
+	Documentation/driver-api/rfkill.rst for details.
 
 
 EXPERIMENTAL: UWB
@@ -1354,10 +1422,11 @@ sysfs rfkill class: switch "tpacpi_uwb_sw"
 This feature exports an rfkill controller for the UWB device, if one is
 present and enabled in the BIOS.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	rfkill controller switch "tpacpi_uwb_sw": refer to
-	Documentation/rfkill.txt for details.
+	Documentation/driver-api/rfkill.rst for details.
 
 Adaptive keyboard
 -----------------
@@ -1368,11 +1437,11 @@ This sysfs attribute controls the keyboard "face" that will be shown on the
 Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
 and set.
 
-1 = Home mode
-2 = Web-browser mode
-3 = Web-conference mode
-4 = Function mode
-5 = Layflat mode
+- 1 = Home mode
+- 2 = Web-browser mode
+- 3 = Web-conference mode
+- 4 = Function mode
+- 5 = Layflat mode
 
 For more details about which buttons will appear depending on the mode, please
 review the laptop's user guide:
@@ -1382,13 +1451,13 @@ Multiple Commands, Module Parameters
 ------------------------------------
 
 Multiple commands can be written to the proc files in one shot by
-separating them with commas, for example:
+separating them with commas, for example::
 
 	echo enable,0xffff > /proc/acpi/ibm/hotkey
 	echo lcd_disable,crt_enable > /proc/acpi/ibm/video
 
 Commands can also be specified when loading the thinkpad-acpi module,
-for example:
+for example::
 
 	modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
 
@@ -1397,14 +1466,16 @@ Enabling debugging output
 -------------------------
 
 The module takes a debug parameter which can be used to selectively
-enable various classes of debugging output, for example:
+enable various classes of debugging output, for example::
 
 	 modprobe thinkpad_acpi debug=0xffff
 
 will enable all debugging output classes.  It takes a bitmask, so
 to enable more than one output class, just add their values.
 
+	=============		======================================
 	Debug bitmask		Description
+	=============		======================================
 	0x8000			Disclose PID of userspace programs
 				accessing some functions of the driver
 	0x0001			Initialization and probing
@@ -1415,6 +1486,7 @@ to enable more than one output class, just add their values.
 	0x0010			Fan control
 	0x0020			Backlight brightness
 	0x0040			Audio mixer/volume control
+	=============		======================================
 
 There is also a kernel build option to enable more debugging
 information, which may be necessary to debug driver problems.
@@ -1432,8 +1504,10 @@ the module parameter force_load=1.  Regardless of whether this works or
 not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
 
 
-Sysfs interface changelog:
+Sysfs interface changelog
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
+=========	===============================================================
 0x000100:	Initial sysfs support, as a single platform driver and
 		device.
 0x000200:	Hot key support for 32 hot keys, and radio slider switch
@@ -1485,3 +1559,4 @@ Sysfs interface changelog:
 0x030000:	Thermal and fan sysfs attributes were moved to the hwmon
 		device instead of being attached to the backing platform
 		device.
+=========	===============================================================
diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/admin-guide/laptops/toshiba_haps.rst
index 0c1d88dedbde..d28b6c3f2849 100644
--- a/Documentation/laptops/toshiba_haps.txt
+++ b/Documentation/admin-guide/laptops/toshiba_haps.rst
@@ -1,18 +1,19 @@
-Kernel driver toshiba_haps
+====================================
 Toshiba HDD Active Protection Sensor
 ====================================
 
+Kernel driver: toshiba_haps
+
 Author: Azael Avalos <coproscefalo@gmail.com>
 
 
-0. Contents
------------
+.. 0. Contents
 
-1. Description
-2. Interface
-3. Accelerometer axes
-4. Supported devices
-5. Usage
+   1. Description
+   2. Interface
+   3. Accelerometer axes
+   4. Supported devices
+   5. Usage
 
 
 1. Description
@@ -32,17 +33,20 @@ file to set the desired protection level or sensor sensibility.
 ------------
 
 This device comes with 3 methods:
-_STA -  Checks existence of the device, returning Zero if the device does not
+
+====	=====================================================================
+_STA    Checks existence of the device, returning Zero if the device does not
 	exists or is not supported.
-PTLV -  Sets the desired protection level.
-RSSS -  Shuts down the HDD protection interface for a few seconds,
+PTLV    Sets the desired protection level.
+RSSS    Shuts down the HDD protection interface for a few seconds,
 	then restores normal operation.
+====	=====================================================================
 
 Note:
-The presence of Solid State Drives (SSD) can make this driver to fail loading,
-given the fact that such drives have no movable parts, and thus, not requiring
-any "protection" as well as failing during the evaluation of the _STA method
-found under this device.
+  The presence of Solid State Drives (SSD) can make this driver to fail loading,
+  given the fact that such drives have no movable parts, and thus, not requiring
+  any "protection" as well as failing during the evaluation of the _STA method
+  found under this device.
 
 
 3. Accelerometer axes
@@ -66,11 +70,18 @@ conventional HDD and not only SSD, or a combination of both HDD and SSD.
 --------
 
 The sysfs files under /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/ are:
-protection_level - The protection_level is readable and writeable, and
+
+================   ============================================================
+protection_level   The protection_level is readable and writeable, and
 		   provides a way to let userspace query the current protection
 		   level, as well as set the desired protection level, the
-		   available protection levels are:
-		   0 - Disabled | 1 - Low | 2 - Medium | 3 - High
-reset_protection - The reset_protection entry is writeable only, being "1"
+		   available protection levels are::
+
+		     ============   =======   ==========   ========
+		     0 - Disabled   1 - Low   2 - Medium   3 - High
+		     ============   =======   ==========   ========
+
+reset_protection   The reset_protection entry is writeable only, being "1"
 		   the only parameter it accepts, it is used to trigger
 		   a reset of the protection interface.
+================   ============================================================
diff --git a/Documentation/auxdisplay/lcd-panel-cgram.txt b/Documentation/admin-guide/lcd-panel-cgram.rst
index 7f82c905763d..a3eb00c62f53 100644
--- a/Documentation/auxdisplay/lcd-panel-cgram.txt
+++ b/Documentation/admin-guide/lcd-panel-cgram.rst
@@ -1,3 +1,7 @@
+======================================
+Parallel port LCD/Keypad Panel support
+======================================
+
 Some LCDs allow you to define up to 8 characters, mapped to ASCII
 characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
@@ -7,7 +11,7 @@ illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
-examples :
+examples::
 
   printf "\e[LG0010101050D1F0C04;"  => 0 = [enter]
   printf "\e[LG1040E1F0000000000;"  => 1 = [up]
@@ -21,4 +25,3 @@ examples :
   printf "\e[LG00002061E1E060200;"  => small speaker
 
 Willy
-
diff --git a/Documentation/ldm.txt b/Documentation/admin-guide/ldm.rst
index 12c571368e73..12c571368e73 100644
--- a/Documentation/ldm.txt
+++ b/Documentation/admin-guide/ldm.rst
diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/admin-guide/lockup-watchdogs.rst
index 290840c160af..290840c160af 100644
--- a/Documentation/lockup-watchdogs.txt
+++ b/Documentation/admin-guide/lockup-watchdogs.rst
diff --git a/Documentation/cma/debugfs.txt b/Documentation/admin-guide/mm/cma_debugfs.rst
index 6cef20a8cedc..4e06ffabd78a 100644
--- a/Documentation/cma/debugfs.txt
+++ b/Documentation/admin-guide/mm/cma_debugfs.rst
@@ -1,3 +1,7 @@
+=====================
+CMA Debugfs Interface
+=====================
+
 The CMA debugfs interface is useful to retrieve basic information out of the
 different CMA areas and to test allocation/release in each of the areas.
 
@@ -12,7 +16,7 @@ The structure of the files created under that directory is as follows:
  - [RO] count: Amount of memory in the CMA area.
  - [RO] order_per_bit: Order of pages represented by one bit.
  - [RO] bitmap: The bitmap of page states in the zone.
- - [WO] alloc: Allocate N pages from that CMA area. For example:
+ - [WO] alloc: Allocate N pages from that CMA area. For example::
 
 	echo 5 > <debugfs>/cma/cma-2/alloc
 
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index ddf8d8d33377..11db46448354 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -11,7 +11,7 @@ processes address space and many other cool things.
 Linux memory management is a complex system with many configurable
 settings. Most of these settings are available via ``/proc``
 filesystem and can be quired and adjusted using ``sysctl``. These APIs
-are described in Documentation/sysctl/vm.txt and in `man 5 proc`_.
+are described in Documentation/admin-guide/sysctl/vm.rst and in `man 5 proc`_.
 
 .. _man 5 proc: http://man7.org/linux/man-pages/man5/proc.5.html
 
@@ -26,6 +26,7 @@ the Linux memory management.
    :maxdepth: 1
 
    concepts
+   cma_debugfs
    hugetlbpage
    idle_page_tracking
    ksm
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 9303786632d1..874eb0c77d34 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -59,7 +59,7 @@ MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE.
 
 If a region of memory must be split into at least one new MADV_MERGEABLE
 or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process
-will exceed ``vm.max_map_count`` (see Documentation/sysctl/vm.txt).
+will exceed ``vm.max_map_count`` (see Documentation/admin-guide/sysctl/vm.rst).
 
 Like other madvise calls, they are intended for use on mapped areas of
 the user address space: they will report ENOMEM if the specified range
diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
index 546f174e5d6a..8463f5538fda 100644
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -15,7 +15,7 @@ document attempts to describe the concepts and APIs of the 2.6 memory policy
 support.
 
 Memory policies should not be confused with cpusets
-(``Documentation/cgroup-v1/cpusets.rst``)
+(``Documentation/admin-guide/cgroup-v1/cpusets.rst``)
 which is an administrative mechanism for restricting the nodes from which
 memory may be allocated by a set of processes. Memory policies are a
 programming interface that a NUMA-aware application can take advantage of.  When
diff --git a/Documentation/namespaces/compatibility-list.txt b/Documentation/admin-guide/namespaces/compatibility-list.rst
index defc5589bfcd..318800b2a943 100644
--- a/Documentation/namespaces/compatibility-list.txt
+++ b/Documentation/admin-guide/namespaces/compatibility-list.rst
@@ -1,4 +1,6 @@
-	Namespaces compatibility list
+=============================
+Namespaces compatibility list
+=============================
 
 This document contains the information about the problems user
 may have when creating tasks living in different namespaces.
@@ -7,13 +9,16 @@ Here's the summary. This matrix shows the known problems, that
 occur when tasks share some namespace (the columns) while living
 in different other namespaces (the rows):
 
-	UTS	IPC	VFS	PID	User	Net
+====	===	===	===	===	====	===
+-	UTS	IPC	VFS	PID	User	Net
+====	===	===	===	===	====	===
 UTS	 X
 IPC		 X	 1
 VFS			 X
 PID		 1	 1	 X
 User		 2	 2		 X
 Net						 X
+====	===	===	===	===	====	===
 
 1. Both the IPC and the PID namespaces provide IDs to address
    object inside the kernel. E.g. semaphore with IPCID or
@@ -36,4 +41,3 @@ Net						 X
    even having equal UIDs.
 
    But currently this is not so.
-
diff --git a/Documentation/admin-guide/namespaces/index.rst b/Documentation/admin-guide/namespaces/index.rst
new file mode 100644
index 000000000000..384f2e0f33d2
--- /dev/null
+++ b/Documentation/admin-guide/namespaces/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Namespaces
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   compatibility-list
+   resource-control
diff --git a/Documentation/namespaces/resource-control.txt b/Documentation/admin-guide/namespaces/resource-control.rst
index abc13c394738..369556e00f0c 100644
--- a/Documentation/namespaces/resource-control.txt
+++ b/Documentation/admin-guide/namespaces/resource-control.rst
@@ -1,3 +1,7 @@
+===========================
+Namespaces research control
+===========================
+
 There are a lot of kinds of objects in the kernel that don't have
 individual limits or that have limits that are ineffective when a set
 of processes is allowed to switch user ids.  With user namespaces
diff --git a/Documentation/numastat.txt b/Documentation/admin-guide/numastat.rst
index aaf1667489f8..aaf1667489f8 100644
--- a/Documentation/numastat.txt
+++ b/Documentation/admin-guide/numastat.rst
diff --git a/Documentation/perf/arm-ccn.txt b/Documentation/admin-guide/perf/arm-ccn.rst
index 15cdb7bc57c3..832b0c64023a 100644
--- a/Documentation/perf/arm-ccn.txt
+++ b/Documentation/admin-guide/perf/arm-ccn.rst
@@ -1,3 +1,4 @@
+==========================
 ARM Cache Coherent Network
 ==========================
 
@@ -29,6 +30,7 @@ Crosspoint watchpoint-based events (special "event" value 0xfe)
 require "xp" and "vc" as as above plus "port" (device port index),
 "dir" (transmit/receive direction), comparator values ("cmp_l"
 and "cmp_h") and "mask", being index of the comparator mask.
+
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional
@@ -44,16 +46,16 @@ request the events on this processor (if not, the perf_event->cpu value
 will be overwritten anyway). In case of this processor being offlined,
 the events are migrated to another one and the attribute is updated.
 
-Example of perf tool use:
+Example of perf tool use::
 
-/ # perf list | grep ccn
-  ccn/cycles/                                        [Kernel PMU event]
-<...>
-  ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
-<...>
+  / # perf list | grep ccn
+    ccn/cycles/                                        [Kernel PMU event]
+  <...>
+    ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
+  <...>
 
-/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
-                                                                       sleep 1
+  / # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+                                                                         sleep 1
 
 The driver does not support sampling, therefore "perf record" will
 not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/perf/arm_dsu_pmu.txt b/Documentation/admin-guide/perf/arm_dsu_pmu.rst
index d611e15f5add..7fd34db75d13 100644
--- a/Documentation/perf/arm_dsu_pmu.txt
+++ b/Documentation/admin-guide/perf/arm_dsu_pmu.rst
@@ -1,3 +1,4 @@
+==================================
 ARM DynamIQ Shared Unit (DSU) PMU
 ==================================
 
@@ -13,7 +14,7 @@ PMU doesn't support process specific events and cannot be used in sampling mode.
 The DSU provides a bitmap for a subset of implemented events via hardware
 registers. There is no way for the driver to determine if the other events
 are available or not. Hence the driver exposes only those events advertised
-by the DSU, in "events" directory under :
+by the DSU, in "events" directory under::
 
   /sys/bus/event_sources/devices/arm_dsu_<N>/
 
@@ -23,6 +24,6 @@ and use the raw event code for the unlisted events.
 The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
 
 
-e.g usage :
+e.g usage::
 
 	perf stat -a -e arm_dsu_0/cycles/
diff --git a/Documentation/perf/hisi-pmu.txt b/Documentation/admin-guide/perf/hisi-pmu.rst
index 267a028b2741..404a5c3d9d00 100644
--- a/Documentation/perf/hisi-pmu.txt
+++ b/Documentation/admin-guide/perf/hisi-pmu.rst
@@ -1,5 +1,7 @@
+======================================================
 HiSilicon SoC uncore Performance Monitoring Unit (PMU)
 ======================================================
+
 The HiSilicon SoC chip includes various independent system device PMUs
 such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are
 independent and have hardware logic to gather statistics and performance
@@ -11,11 +13,13 @@ called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has
 two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
 
 HiSilicon SoC uncore PMU driver
----------------------------------------
+-------------------------------
+
 Each device PMU has separate registers for event counting, control and
 interrupt, and the PMU driver shall register perf PMU drivers like L3C,
 HHA and DDRC etc. The available events and configuration options shall
-be described in the sysfs, see :
+be described in the sysfs, see:
+
 /sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
 /sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
 The "perf list" command shall list the available events from sysfs.
@@ -24,27 +28,30 @@ Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU
 name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
 where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
 module.
+
 e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in
 SCCL ID #3.
+
 e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in
 SCCL ID #1.
 
 The driver also provides a "cpumask" sysfs attribute, which shows the CPU core
 ID used to count the uncore PMU event.
 
-Example usage of perf:
-$# perf list
-hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-
-$# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
-$# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
+Example usage of perf::
+
+  $# perf list
+  hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported as the events are all uncore.
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
new file mode 100644
index 000000000000..ee4bfd2a740f
--- /dev/null
+++ b/Documentation/admin-guide/perf/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Performance monitor support
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   hisi-pmu
+   qcom_l2_pmu
+   qcom_l3_pmu
+   arm-ccn
+   xgene-pmu
+   arm_dsu_pmu
+   thunderx2-pmu
diff --git a/Documentation/perf/qcom_l2_pmu.txt b/Documentation/admin-guide/perf/qcom_l2_pmu.rst
index b25b97659ab9..c130178a4a55 100644
--- a/Documentation/perf/qcom_l2_pmu.txt
+++ b/Documentation/admin-guide/perf/qcom_l2_pmu.rst
@@ -1,3 +1,4 @@
+=====================================================================
 Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU)
 =====================================================================
 
@@ -28,7 +29,7 @@ The driver provides a "cpumask" sysfs attribute which contains a mask
 consisting of one CPU per cluster which will be used to handle all the PMU
 events on that cluster.
 
-Examples for use with perf:
+Examples for use with perf::
 
   perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1
 
diff --git a/Documentation/perf/qcom_l3_pmu.txt b/Documentation/admin-guide/perf/qcom_l3_pmu.rst
index 96b3a9444a0d..a3d014a46bfd 100644
--- a/Documentation/perf/qcom_l3_pmu.txt
+++ b/Documentation/admin-guide/perf/qcom_l3_pmu.rst
@@ -1,3 +1,4 @@
+===========================================================================
 Qualcomm Datacenter Technologies L3 Cache Performance Monitoring Unit (PMU)
 ===========================================================================
 
@@ -17,7 +18,7 @@ The hardware implements 32bit event counters and has a flat 8bit event space
 exposed via the "event" format attribute. In addition to the 32bit physical
 counters the driver supports virtual 64bit hardware counters by using hardware
 counter chaining. This feature is exposed via the "lc" (long counter) format
-flag. E.g.:
+flag. E.g.::
 
   perf stat -e l3cache_0_0/read-miss,lc/
 
diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/admin-guide/perf/thunderx2-pmu.rst
index dffc57143736..08e33675853a 100644
--- a/Documentation/perf/thunderx2-pmu.txt
+++ b/Documentation/admin-guide/perf/thunderx2-pmu.rst
@@ -1,3 +1,4 @@
+=============================================================
 Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
 =============================================================
 
@@ -24,18 +25,18 @@ and configuration options under sysfs, see
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.
 
-Examples:
+Examples::
 
-# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
+  # perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
 
-# perf stat -a -e \
-uncore_dmc_0/cnt_cycles/,\
-uncore_dmc_0/data_transfers/,\
-uncore_dmc_0/read_txns/,\
-uncore_dmc_0/write_txns/ sleep 1
+  # perf stat -a -e \
+  uncore_dmc_0/cnt_cycles/,\
+  uncore_dmc_0/data_transfers/,\
+  uncore_dmc_0/read_txns/,\
+  uncore_dmc_0/write_txns/ sleep 1
 
-# perf stat -a -e \
-uncore_l3c_0/read_request/,\
-uncore_l3c_0/read_hit/,\
-uncore_l3c_0/inv_request/,\
-uncore_l3c_0/inv_hit/ sleep 1
+  # perf stat -a -e \
+  uncore_l3c_0/read_request/,\
+  uncore_l3c_0/read_hit/,\
+  uncore_l3c_0/inv_request/,\
+  uncore_l3c_0/inv_hit/ sleep 1
diff --git a/Documentation/perf/xgene-pmu.txt b/Documentation/admin-guide/perf/xgene-pmu.rst
index d7cff4454e5b..644f8ed89152 100644
--- a/Documentation/perf/xgene-pmu.txt
+++ b/Documentation/admin-guide/perf/xgene-pmu.rst
@@ -1,3 +1,4 @@
+================================================
 APM X-Gene SoC Performance Monitoring Unit (PMU)
 ================================================
 
@@ -33,7 +34,7 @@ each PMU, please refer to APM X-Gene User Manual.
 Each perf driver also provides a "cpumask" sysfs attribute, which contains a
 single CPU ID of the processor which will be used to handle all the PMU events.
 
-Example for perf tool use:
+Example for perf tool use::
 
  / # perf list | grep -e l3c -e iob -e mcb -e mc
    l3c0/ackq-full/                                    [Kernel PMU event]
diff --git a/Documentation/pnp.txt b/Documentation/admin-guide/pnp.rst
index bab2d10631f0..bab2d10631f0 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/admin-guide/pnp.rst
diff --git a/Documentation/driver-api/rapidio.rst b/Documentation/admin-guide/rapidio.rst
index 71ff658ab78e..71ff658ab78e 100644
--- a/Documentation/driver-api/rapidio.rst
+++ b/Documentation/admin-guide/rapidio.rst
diff --git a/Documentation/rtc.txt b/Documentation/admin-guide/rtc.rst
index 688c95b11919..688c95b11919 100644
--- a/Documentation/rtc.txt
+++ b/Documentation/admin-guide/rtc.rst
diff --git a/Documentation/svga.txt b/Documentation/admin-guide/svga.rst
index b6c2f9acca92..b6c2f9acca92 100644
--- a/Documentation/svga.txt
+++ b/Documentation/admin-guide/svga.rst
diff --git a/Documentation/admin-guide/sysctl/abi.rst b/Documentation/admin-guide/sysctl/abi.rst
new file mode 100644
index 000000000000..599bcde7f0b7
--- /dev/null
+++ b/Documentation/admin-guide/sysctl/abi.rst
@@ -0,0 +1,67 @@
+================================
+Documentation for /proc/sys/abi/
+================================
+
+kernel version 2.6.0.test2
+
+Copyright (c) 2003,  Fabian Frederick <ffrederick@users.sourceforge.net>
+
+For general info: index.rst.
+
+------------------------------------------------------------------------------
+
+This path is binary emulation relevant aka personality types aka abi.
+When a process is executed, it's linked to an exec_domain whose
+personality is defined using values available from /proc/sys/abi.
+You can find further details about abi in include/linux/personality.h.
+
+Here are the files featuring in 2.6 kernel:
+
+- defhandler_coff
+- defhandler_elf
+- defhandler_lcall7
+- defhandler_libcso
+- fake_utsname
+- trace
+
+defhandler_coff
+---------------
+
+defined value:
+	PER_SCOSVR3::
+
+		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
+
+defhandler_elf
+--------------
+
+defined value:
+	PER_LINUX::
+
+		0
+
+defhandler_lcall7
+-----------------
+
+defined value :
+	PER_SVR4::
+
+		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+
+defhandler_libsco
+-----------------
+
+defined value:
+	PER_SVR4::
+
+		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+
+fake_utsname
+------------
+
+Unused
+
+trace
+-----
+
+Unused
diff --git a/Documentation/sysctl/fs.txt b/Documentation/admin-guide/sysctl/fs.rst
index ebc679bcb2dc..2a45119e3331 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/fs/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+===============================
+Documentation for /proc/sys/fs/
+===============================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in intro.rst.
+
+------------------------------------------------------------------------------
 
 This file contains documentation for the sysctl files in
 /proc/sys/fs/ and is valid for Linux kernel version 2.2.
@@ -16,9 +22,10 @@ system, it is advisable to read both documentation and source
 before actually making adjustments.
 
 1. /proc/sys/fs
-----------------------------------------------------------
+===============
 
 Currently, these files are in /proc/sys/fs:
+
 - aio-max-nr
 - aio-nr
 - dentry-state
@@ -42,9 +49,9 @@ Currently, these files are in /proc/sys/fs:
 - super-max
 - super-nr
 
-==============================================================
 
-aio-nr & aio-max-nr:
+aio-nr & aio-max-nr
+-------------------
 
 aio-nr is the running total of the number of events specified on the
 io_setup system call for all currently active aio contexts.  If aio-nr
@@ -52,21 +59,20 @@ reaches aio-max-nr then io_setup will fail with EAGAIN.  Note that
 raising aio-max-nr does not result in the pre-allocation or re-sizing
 of any kernel data structures.
 
-==============================================================
 
-dentry-state:
+dentry-state
+------------
 
-From linux/include/linux/dcache.h:
---------------------------------------------------------------
-struct dentry_stat_t dentry_stat {
+From linux/include/linux/dcache.h::
+
+  struct dentry_stat_t dentry_stat {
         int nr_dentry;
         int nr_unused;
         int age_limit;         /* age in seconds */
         int want_pages;        /* pages requested by system */
         int nr_negative;       /* # of unused negative dentries */
         int dummy;             /* Reserved for future use */
-};
---------------------------------------------------------------
+  };
 
 Dentries are dynamically allocated and deallocated.
 
@@ -84,9 +90,9 @@ negative dentries which do not map to any files. Instead,
 they help speeding up rejection of non-existing files provided
 by the users.
 
-==============================================================
 
-dquot-max & dquot-nr:
+dquot-max & dquot-nr
+--------------------
 
 The file dquot-max shows the maximum number of cached disk
 quota entries.
@@ -98,9 +104,9 @@ If the number of free cached disk quotas is very low and
 you have some awesome number of simultaneous system users,
 you might want to raise the limit.
 
-==============================================================
 
-file-max & file-nr:
+file-max & file-nr
+------------------
 
 The value in file-max denotes the maximum number of file-
 handles that the Linux kernel will allocate. When you get lots
@@ -119,18 +125,19 @@ used file handles.
 Attempts to allocate more file descriptors than file-max are
 reported with printk, look for "VFS: file-max limit <number>
 reached".
-==============================================================
 
-nr_open:
+
+nr_open
+-------
 
 This denotes the maximum number of file-handles a process can
 allocate. Default value is 1024*1024 (1048576) which should be
 enough for most machines. Actual limit depends on RLIMIT_NOFILE
 resource limit.
 
-==============================================================
 
-inode-max, inode-nr & inode-state:
+inode-max, inode-nr & inode-state
+---------------------------------
 
 As with file handles, the kernel allocates the inode structures
 dynamically, but can't free them yet.
@@ -157,9 +164,9 @@ preshrink is nonzero when the nr_inodes > inode-max and the
 system needs to prune the inode list instead of allocating
 more.
 
-==============================================================
 
-overflowgid & overflowuid:
+overflowgid & overflowuid
+-------------------------
 
 Some filesystems only support 16-bit UIDs and GIDs, although in Linux
 UIDs and GIDs are 32 bits. When one of these filesystems is mounted
@@ -169,18 +176,18 @@ to a fixed value before being written to disk.
 These sysctls allow you to change the value of the fixed UID and GID.
 The default is 65534.
 
-==============================================================
 
-pipe-user-pages-hard:
+pipe-user-pages-hard
+--------------------
 
 Maximum total number of pages a non-privileged user may allocate for pipes.
 Once this limit is reached, no new pipes may be allocated until usage goes
 below the limit again. When set to 0, no limit is applied, which is the default
 setting.
 
-==============================================================
 
-pipe-user-pages-soft:
+pipe-user-pages-soft
+--------------------
 
 Maximum total number of pages a non-privileged user may allocate for pipes
 before the pipe size gets limited to a single page. Once this limit is reached,
@@ -190,9 +197,9 @@ denied until usage goes below the limit again. The default value allows to
 allocate up to 1024 pipes at their default size. When set to 0, no limit is
 applied.
 
-==============================================================
 
-protected_fifos:
+protected_fifos
+---------------
 
 The intent of this protection is to avoid unintentional writes to
 an attacker-controlled FIFO, where a program expected to create a regular
@@ -208,9 +215,9 @@ When set to "2" it also applies to group writable sticky directories.
 
 This protection is based on the restrictions in Openwall.
 
-==============================================================
 
-protected_hardlinks:
+protected_hardlinks
+--------------------
 
 A long-standing class of security issues is the hardlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
@@ -228,9 +235,9 @@ already own the source file, or do not have read/write access to it.
 
 This protection is based on the restrictions in Openwall and grsecurity.
 
-==============================================================
 
-protected_regular:
+protected_regular
+-----------------
 
 This protection is similar to protected_fifos, but it
 avoids writes to an attacker-controlled regular file, where a program
@@ -244,9 +251,9 @@ owned by the owner of the directory.
 
 When set to "2" it also applies to group writable sticky directories.
 
-==============================================================
 
-protected_symlinks:
+protected_symlinks
+------------------
 
 A long-standing class of security issues is the symlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
@@ -264,34 +271,38 @@ follower match, or when the directory owner matches the symlink's owner.
 
 This protection is based on the restrictions in Openwall and grsecurity.
 
-==============================================================
 
 suid_dumpable:
+--------------
 
 This value can be used to query and set the core dump mode for setuid
 or otherwise protected/tainted binaries. The modes are
 
-0 - (default) - traditional behaviour. Any process which has changed
-	privilege levels or is execute only will not be dumped.
-1 - (debug) - all processes dump core when possible. The core dump is
-	owned by the current user and no security is applied. This is
-	intended for system debugging situations only. Ptrace is unchecked.
-	This is insecure as it allows regular users to examine the memory
-	contents of privileged processes.
-2 - (suidsafe) - any binary which normally would not be dumped is dumped
-	anyway, but only if the "core_pattern" kernel sysctl is set to
-	either a pipe handler or a fully qualified path. (For more details
-	on this limitation, see CVE-2006-2451.) This mode is appropriate
-	when administrators are attempting to debug problems in a normal
-	environment, and either have a core dump pipe handler that knows
-	to treat privileged core dumps with care, or specific directory
-	defined for catching core dumps. If a core dump happens without
-	a pipe handler or fully qualifid path, a message will be emitted
-	to syslog warning about the lack of a correct setting.
-
-==============================================================
-
-super-max & super-nr:
+=   ==========  ===============================================================
+0   (default)	traditional behaviour. Any process which has changed
+		privilege levels or is execute only will not be dumped.
+1   (debug)	all processes dump core when possible. The core dump is
+		owned by the current user and no security is applied. This is
+		intended for system debugging situations only.
+		Ptrace is unchecked.
+		This is insecure as it allows regular users to examine the
+		memory contents of privileged processes.
+2   (suidsafe)	any binary which normally would not be dumped is dumped
+		anyway, but only if the "core_pattern" kernel sysctl is set to
+		either a pipe handler or a fully qualified path. (For more
+		details on this limitation, see CVE-2006-2451.) This mode is
+		appropriate when administrators are attempting to debug
+		problems in a normal environment, and either have a core dump
+		pipe handler that knows to treat privileged core dumps with
+		care, or specific directory defined for catching core dumps.
+		If a core dump happens without a pipe handler or fully
+		qualified path, a message will be emitted to syslog warning
+		about the lack of a correct setting.
+=   ==========  ===============================================================
+
+
+super-max & super-nr
+--------------------
 
 These numbers control the maximum number of superblocks, and
 thus the maximum number of mounted filesystems the kernel
@@ -299,33 +310,33 @@ can have. You only need to increase super-max if you need to
 mount more filesystems than the current value in super-max
 allows you to.
 
-==============================================================
 
-aio-nr & aio-max-nr:
+aio-nr & aio-max-nr
+-------------------
 
 aio-nr shows the current system-wide number of asynchronous io
 requests.  aio-max-nr allows you to change the maximum value
 aio-nr can grow to.
 
-==============================================================
 
-mount-max:
+mount-max
+---------
 
 This denotes the maximum number of mounts that may exist
 in a mount namespace.
 
-==============================================================
 
 
 2. /proc/sys/fs/binfmt_misc
-----------------------------------------------------------
+===========================
 
 Documentation for the files in /proc/sys/fs/binfmt_misc is
 in Documentation/admin-guide/binfmt-misc.rst.
 
 
 3. /proc/sys/fs/mqueue - POSIX message queues filesystem
-----------------------------------------------------------
+========================================================
+
 
 The "mqueue"  filesystem provides  the necessary kernel features to enable the
 creation of a  user space  library that  implements  the  POSIX message queues
@@ -356,7 +367,7 @@ the default message size value if attr parameter of mq_open(2) is NULL. If it
 exceed msgsize_max, the default value is initialized msgsize_max.
 
 4. /proc/sys/fs/epoll - Configuration options for the epoll interface
---------------------------------------------------------
+=====================================================================
 
 This directory contains configuration options for the epoll(7) interface.
 
@@ -371,4 +382,3 @@ Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
 on a 64bit one.
 The current default value for  max_user_watches  is the 1/32 of the available
 low memory, divided for the "watch" cost in bytes.
-
diff --git a/Documentation/sysctl/README b/Documentation/admin-guide/sysctl/index.rst
index d5f24ab0ecc3..03346f98c7b9 100644
--- a/Documentation/sysctl/README
+++ b/Documentation/admin-guide/sysctl/index.rst
@@ -1,5 +1,10 @@
-Documentation for /proc/sys/		kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+===========================
+Documentation for /proc/sys
+===========================
+
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+------------------------------------------------------------------------------
 
 'Why', I hear you ask, 'would anyone even _want_ documentation
 for them sysctl files? If anybody really needs it, it's all in
@@ -12,11 +17,12 @@ have the time or knowledge to read the source code.
 Furthermore, the programmers who built sysctl have built it to
 be actually used, not just for the fun of programming it :-)
 
-==============================================================
+------------------------------------------------------------------------------
 
 Legal blurb:
 
 As usual, there are two main things to consider:
+
 1. you get what you pay for
 2. it's free
 
@@ -35,15 +41,17 @@ stories to: <riel@nl.linux.org>
 
 Rik van Riel.
 
-==============================================================
+--------------------------------------------------------------
 
-Introduction:
+Introduction
+============
 
 Sysctl is a means of configuring certain aspects of the kernel
 at run-time, and the /proc/sys/ directory is there so that you
 don't even need special tools to do it!
 In fact, there are only four things needed to use these config
 facilities:
+
 - a running Linux system
 - root access
 - common sense (this is especially hard to come by these days)
@@ -54,7 +62,9 @@ several (arch-dependent?) subdirs. Each subdir is mainly about
 one part of the kernel, so you can do configuration on a piece
 by piece basis, or just some 'thematic frobbing'.
 
-The subdirs are about:
+This documentation is about:
+
+=============== ===============================================================
 abi/		execution domains & personalities
 debug/		<empty>
 dev/		device specific information (eg dev/cdrom/info)
@@ -70,7 +80,19 @@ sunrpc/		SUN Remote Procedure Call (NFS)
 vm/		memory management tuning
 		buffer and cache management
 user/		Per user per user namespace limits
+=============== ===============================================================
 
 These are the subdirs I have on my system. There might be more
 or other subdirs in another setup. If you see another dir, I'd
 really like to hear about it :-)
+
+.. toctree::
+   :maxdepth: 1
+
+   abi
+   fs
+   kernel
+   net
+   sunrpc
+   user
+   vm
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/admin-guide/sysctl/kernel.rst
index 1b2fe17cd2fa..032c7cd3cede 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/kernel/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+===================================
+Documentation for /proc/sys/kernel/
+===================================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains documentation for the sysctl files in
 /proc/sys/kernel/ and is valid for Linux kernel version 2.2.
@@ -101,9 +107,9 @@ show up in /proc/sys/kernel:
 - watchdog_thresh
 - version
 
-==============================================================
 
 acct:
+=====
 
 highwater lowwater frequency
 
@@ -118,18 +124,18 @@ That is, suspend accounting if there left <= 2% free; resume it
 if we got >=4%; consider information about amount of free space
 valid for 30 seconds.
 
-==============================================================
 
 acpi_video_flags:
+=================
 
 flags
 
 See Doc*/kernel/power/video.txt, it allows mode of video boot to be
 set during run time.
 
-==============================================================
 
 auto_msgmni:
+============
 
 This variable has no effect and may be removed in future kernel
 releases. Reading it always returns 0.
@@ -139,9 +145,8 @@ Echoing "1" into this file enabled msgmni automatic recomputing.
 Echoing "0" turned it off. auto_msgmni default value was 1.
 
 
-==============================================================
-
 bootloader_type:
+================
 
 x86 bootloader identification
 
@@ -156,9 +161,9 @@ the value 340 = 0x154.
 See the type_of_loader and ext_loader_type fields in
 Documentation/x86/boot.rst for additional information.
 
-==============================================================
 
 bootloader_version:
+===================
 
 x86 bootloader version
 
@@ -168,27 +173,31 @@ file will contain the value 564 = 0x234.
 See the type_of_loader and ext_loader_ver fields in
 Documentation/x86/boot.rst for additional information.
 
-==============================================================
 
-cap_last_cap
+cap_last_cap:
+=============
 
 Highest valid capability of the running kernel.  Exports
 CAP_LAST_CAP from the kernel.
 
-==============================================================
 
 core_pattern:
+=============
 
 core_pattern is used to specify a core dumpfile pattern name.
-. max length 127 characters; default value is "core"
-. core_pattern is used as a pattern template for the output filename;
+
+* max length 127 characters; default value is "core"
+* core_pattern is used as a pattern template for the output filename;
   certain string patterns (beginning with '%') are substituted with
   their actual values.
-. backward compatibility with core_uses_pid:
+* backward compatibility with core_uses_pid:
+
 	If core_pattern does not include "%p" (default does not)
 	and core_uses_pid is set, then .PID will be appended to
 	the filename.
-. corename format specifiers:
+
+* corename format specifiers::
+
 	%<NUL>	'%' is dropped
 	%%	output one '%'
 	%p	pid
@@ -205,13 +214,14 @@ core_pattern is used to specify a core dumpfile pattern name.
 	%e	executable filename (may be shortened)
 	%E	executable path
 	%<OTHER> both are dropped
-. If the first character of the pattern is a '|', the kernel will treat
+
+* If the first character of the pattern is a '|', the kernel will treat
   the rest of the pattern as a command to run.  The core dump will be
   written to the standard input of that program instead of to a file.
 
-==============================================================
 
 core_pipe_limit:
+================
 
 This sysctl is only applicable when core_pattern is configured to pipe
 core files to a user space helper (when the first character of
@@ -232,9 +242,9 @@ parallel, but that no waiting will take place (i.e. the collecting
 process is not guaranteed access to /proc/<crashing pid>/).  This
 value defaults to 0.
 
-==============================================================
 
 core_uses_pid:
+==============
 
 The default coredump filename is "core".  By setting
 core_uses_pid to 1, the coredump filename becomes core.PID.
@@ -242,9 +252,9 @@ If core_pattern does not include "%p" (default does not)
 and core_uses_pid is set, then .PID will be appended to
 the filename.
 
-==============================================================
 
 ctrl-alt-del:
+=============
 
 When the value in this file is 0, ctrl-alt-del is trapped and
 sent to the init(1) program to handle a graceful restart.
@@ -252,14 +262,15 @@ When, however, the value is > 0, Linux's reaction to a Vulcan
 Nerve Pinch (tm) will be an immediate reboot, without even
 syncing its dirty buffers.
 
-Note: when a program (like dosemu) has the keyboard in 'raw'
-mode, the ctrl-alt-del is intercepted by the program before it
-ever reaches the kernel tty layer, and it's up to the program
-to decide what to do with it.
+Note:
+  when a program (like dosemu) has the keyboard in 'raw'
+  mode, the ctrl-alt-del is intercepted by the program before it
+  ever reaches the kernel tty layer, and it's up to the program
+  to decide what to do with it.
 
-==============================================================
 
 dmesg_restrict:
+===============
 
 This toggle indicates whether unprivileged users are prevented
 from using dmesg(8) to view messages from the kernel's log buffer.
@@ -270,18 +281,21 @@ dmesg(8).
 The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the
 default value of dmesg_restrict.
 
-==============================================================
 
 domainname & hostname:
+======================
 
 These files can be used to set the NIS/YP domainname and the
 hostname of your box in exactly the same way as the commands
-domainname and hostname, i.e.:
-# echo "darkstar" > /proc/sys/kernel/hostname
-# echo "mydomain" > /proc/sys/kernel/domainname
-has the same effect as
-# hostname "darkstar"
-# domainname "mydomain"
+domainname and hostname, i.e.::
+
+	# echo "darkstar" > /proc/sys/kernel/hostname
+	# echo "mydomain" > /proc/sys/kernel/domainname
+
+has the same effect as::
+
+	# hostname "darkstar"
+	# domainname "mydomain"
 
 Note, however, that the classic darkstar.frop.org has the
 hostname "darkstar" and DNS (Internet Domain Name Server)
@@ -290,8 +304,9 @@ Information Service) or YP (Yellow Pages) domainname. These two
 domain names are in general different. For a detailed discussion
 see the hostname(1) man page.
 
-==============================================================
+
 hardlockup_all_cpu_backtrace:
+=============================
 
 This value controls the hard lockup detector behavior when a hard
 lockup condition is detected as to whether or not to gather further
@@ -301,9 +316,10 @@ will be initiated.
 0: do nothing. This is the default behavior.
 
 1: on detection capture more debug information.
-==============================================================
+
 
 hardlockup_panic:
+=================
 
 This parameter can be used to control whether the kernel panics
 when a hard lockup is detected.
@@ -311,19 +327,19 @@ when a hard lockup is detected.
    0 - don't panic on hard lockup
    1 - panic on hard lockup
 
-See Documentation/lockup-watchdogs.txt for more information.  This can
+See Documentation/admin-guide/lockup-watchdogs.rst for more information.  This can
 also be set using the nmi_watchdog kernel parameter.
 
-==============================================================
 
 hotplug:
+========
 
 Path for the hotplug policy agent.
 Default value is "/sbin/hotplug".
 
-==============================================================
 
 hung_task_panic:
+================
 
 Controls the kernel's behavior when a hung task is detected.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
@@ -332,27 +348,28 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 1: panic immediately.
 
-==============================================================
 
 hung_task_check_count:
+======================
 
 The upper bound on the number of tasks that are checked.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
-==============================================================
 
 hung_task_timeout_secs:
+=======================
 
 When a task in D state did not get scheduled
 for more than this value report a warning.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 0: means infinite timeout - no checking done.
+
 Possible values to set are in range {0..LONG_MAX/HZ}.
 
-==============================================================
 
 hung_task_check_interval_secs:
+==============================
 
 Hung task check interval. If hung task checking is enabled
 (see hung_task_timeout_secs), the check is done every
@@ -362,9 +379,9 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 0 (default): means use hung_task_timeout_secs as checking interval.
 Possible values to set are in range {0..LONG_MAX/HZ}.
 
-==============================================================
 
 hung_task_warnings:
+===================
 
 The maximum number of warnings to report. During a check interval
 if a hung task is detected, this value is decreased by 1.
@@ -373,9 +390,9 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 -1: report an infinite number of warnings.
 
-==============================================================
 
 hyperv_record_panic_msg:
+========================
 
 Controls whether the panic kmsg data should be reported to Hyper-V.
 
@@ -383,9 +400,9 @@ Controls whether the panic kmsg data should be reported to Hyper-V.
 
 1: report the panic kmsg data. This is the default behavior.
 
-==============================================================
 
 kexec_load_disabled:
+====================
 
 A toggle indicating if the kexec_load syscall has been disabled. This
 value defaults to 0 (false: kexec_load enabled), but can be set to 1
@@ -395,9 +412,9 @@ loaded before disabling the syscall, allowing a system to set up (and
 later use) an image without it being altered. Generally used together
 with the "modules_disabled" sysctl.
 
-==============================================================
 
 kptr_restrict:
+==============
 
 This toggle indicates whether restrictions are placed on
 exposing kernel addresses via /proc and other interfaces.
@@ -420,16 +437,16 @@ values to unprivileged users is a concern.
 When kptr_restrict is set to (2), kernel pointers printed using
 %pK will be replaced with 0's regardless of privileges.
 
-==============================================================
 
 l2cr: (PPC only)
+================
 
 This flag controls the L2 cache of G3 processor boards. If
 0, the cache is disabled. Enabled if nonzero.
 
-==============================================================
 
 modules_disabled:
+=================
 
 A toggle value indicating if modules are allowed to be loaded
 in an otherwise modular kernel.  This toggle defaults to off
@@ -437,9 +454,9 @@ in an otherwise modular kernel.  This toggle defaults to off
 neither loaded nor unloaded, and the toggle cannot be set back
 to false.  Generally used with the "kexec_load_disabled" toggle.
 
-==============================================================
 
 msg_next_id, sem_next_id, and shm_next_id:
+==========================================
 
 These three toggles allows to specify desired id for next allocated IPC
 object: message, semaphore or shared memory respectively.
@@ -448,21 +465,22 @@ By default they are equal to -1, which means generic allocation logic.
 Possible values to set are in range {0..INT_MAX}.
 
 Notes:
-1) kernel doesn't guarantee, that new object will have desired id. So,
-it's up to userspace, how to handle an object with "wrong" id.
-2) Toggle with non-default value will be set back to -1 by kernel after
-successful IPC object allocation. If an IPC object allocation syscall
-fails, it is undefined if the value remains unmodified or is reset to -1.
+  1) kernel doesn't guarantee, that new object will have desired id. So,
+     it's up to userspace, how to handle an object with "wrong" id.
+  2) Toggle with non-default value will be set back to -1 by kernel after
+     successful IPC object allocation. If an IPC object allocation syscall
+     fails, it is undefined if the value remains unmodified or is reset to -1.
 
-==============================================================
 
 nmi_watchdog:
+=============
 
 This parameter can be used to control the NMI watchdog
 (i.e. the hard lockup detector) on x86 systems.
 
-   0 - disable the hard lockup detector
-   1 - enable the hard lockup detector
+0 - disable the hard lockup detector
+
+1 - enable the hard lockup detector
 
 The hard lockup detector monitors each CPU for its ability to respond to
 timer interrupts. The mechanism utilizes CPU performance counter registers
@@ -470,15 +488,15 @@ that are programmed to generate Non-Maskable Interrupts (NMIs) periodically
 while a CPU is busy. Hence, the alternative name 'NMI watchdog'.
 
 The NMI watchdog is disabled by default if the kernel is running as a guest
-in a KVM virtual machine. This default can be overridden by adding
+in a KVM virtual machine. This default can be overridden by adding::
 
    nmi_watchdog=1
 
 to the guest kernel command line (see Documentation/admin-guide/kernel-parameters.rst).
 
-==============================================================
 
-numa_balancing
+numa_balancing:
+===============
 
 Enables/disables automatic page fault based NUMA memory
 balancing. Memory is moved automatically to nodes
@@ -500,10 +518,9 @@ faults may be controlled by the numa_balancing_scan_period_min_ms,
 numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms,
 numa_balancing_scan_size_mb, and numa_balancing_settle_count sysctls.
 
-==============================================================
+numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
+===============================================================================================================================
 
-numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms,
-numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
 
 Automatic NUMA balancing scans tasks address space and unmaps pages to
 detect if pages are properly placed or if the data should be migrated to a
@@ -539,16 +556,18 @@ rate for each task.
 numa_balancing_scan_size_mb is how many megabytes worth of pages are
 scanned for a given scan.
 
-==============================================================
 
 osrelease, ostype & version:
+============================
+
+::
 
-# cat osrelease
-2.1.88
-# cat ostype
-Linux
-# cat version
-#5 Wed Feb 25 21:49:24 MET 1998
+  # cat osrelease
+  2.1.88
+  # cat ostype
+  Linux
+  # cat version
+  #5 Wed Feb 25 21:49:24 MET 1998
 
 The files osrelease and ostype should be clear enough. Version
 needs a little more clarification however. The '#5' means that
@@ -556,9 +575,9 @@ this is the fifth kernel built from this source base and the
 date behind it indicates the time the kernel was built.
 The only way to tune these values is to rebuild the kernel :-)
 
-==============================================================
 
 overflowgid & overflowuid:
+==========================
 
 if your architecture did not always support 32-bit UIDs (i.e. arm,
 i386, m68k, sh, and sparc32), a fixed UID and GID will be returned to
@@ -568,17 +587,17 @@ actual UID or GID would exceed 65535.
 These sysctls allow you to change the value of the fixed UID and GID.
 The default is 65534.
 
-==============================================================
 
 panic:
+======
 
 The value in this file represents the number of seconds the kernel
 waits before rebooting on a panic. When you use the software watchdog,
 the recommended setting is 60.
 
-==============================================================
 
 panic_on_io_nmi:
+================
 
 Controls the kernel's behavior when a CPU receives an NMI caused by
 an IO error.
@@ -591,20 +610,20 @@ an IO error.
    servers issue this sort of NMI when the dump button is pushed,
    and you can use this option to take a crash dump.
 
-==============================================================
 
 panic_on_oops:
+==============
 
 Controls the kernel's behaviour when an oops or BUG is encountered.
 
 0: try to continue operation
 
-1: panic immediately.  If the `panic' sysctl is also non-zero then the
+1: panic immediately.  If the `panic` sysctl is also non-zero then the
    machine will be rebooted.
 
-==============================================================
 
 panic_on_stackoverflow:
+=======================
 
 Controls the kernel's behavior when detecting the overflows of
 kernel, IRQ and exception stacks except a user stack.
@@ -614,9 +633,9 @@ This file shows up if CONFIG_DEBUG_STACKOVERFLOW is enabled.
 
 1: panic immediately.
 
-==============================================================
 
 panic_on_unrecovered_nmi:
+=========================
 
 The default Linux behaviour on an NMI of either memory or unknown is
 to continue operation. For many environments such as scientific
@@ -627,9 +646,9 @@ A small number of systems do generate NMI's for bizarre random reasons
 such as power management so the default is off. That sysctl works like
 the existing panic controls already in that directory.
 
-==============================================================
 
 panic_on_warn:
+==============
 
 Calls panic() in the WARN() path when set to 1.  This is useful to avoid
 a kernel rebuild when attempting to kdump at the location of a WARN().
@@ -638,25 +657,28 @@ a kernel rebuild when attempting to kdump at the location of a WARN().
 
 1: call panic() after printing out WARN() location.
 
-==============================================================
 
 panic_print:
+============
 
 Bitmask for printing system info when panic happens. User can chose
 combination of the following bits:
 
-bit 0: print all tasks info
-bit 1: print system memory info
-bit 2: print timer info
-bit 3: print locks info if CONFIG_LOCKDEP is on
-bit 4: print ftrace buffer
+=====  ========================================
+bit 0  print all tasks info
+bit 1  print system memory info
+bit 2  print timer info
+bit 3  print locks info if CONFIG_LOCKDEP is on
+bit 4  print ftrace buffer
+=====  ========================================
+
+So for example to print tasks and memory info on panic, user can::
 
-So for example to print tasks and memory info on panic, user can:
   echo 3 > /proc/sys/kernel/panic_print
 
-==============================================================
 
 panic_on_rcu_stall:
+===================
 
 When set to 1, calls panic() after RCU stall detection messages. This
 is useful to define the root cause of RCU stalls using a vmcore.
@@ -665,9 +687,9 @@ is useful to define the root cause of RCU stalls using a vmcore.
 
 1: panic() after printing RCU stall messages.
 
-==============================================================
 
 perf_cpu_time_max_percent:
+==========================
 
 Hints to the kernel how much CPU time it should be allowed to
 use to handle perf sampling events.  If the perf subsystem
@@ -680,10 +702,12 @@ unexpectedly take too long to execute, the NMIs can become
 stacked up next to each other so much that nothing else is
 allowed to execute.
 
-0: disable the mechanism.  Do not monitor or correct perf's
+0:
+   disable the mechanism.  Do not monitor or correct perf's
    sampling rate no matter how CPU time it takes.
 
-1-100: attempt to throttle perf's sample rate to this
+1-100:
+   attempt to throttle perf's sample rate to this
    percentage of CPU.  Note: the kernel calculates an
    "expected" length of each sample event.  100 here means
    100% of that expected length.  Even if this is set to
@@ -691,23 +715,30 @@ allowed to execute.
    length is exceeded.  Set to 0 if you truly do not care
    how much CPU is consumed.
 
-==============================================================
 
 perf_event_paranoid:
+====================
 
 Controls use of the performance events system by unprivileged
 users (without CAP_SYS_ADMIN).  The default value is 2.
 
- -1: Allow use of (almost) all events by all users
+===  ==================================================================
+ -1  Allow use of (almost) all events by all users
+
      Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
->=0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
+
+>=0  Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
+
      Disallow raw tracepoint access by users without CAP_SYS_ADMIN
->=1: Disallow CPU event access by users without CAP_SYS_ADMIN
->=2: Disallow kernel profiling by users without CAP_SYS_ADMIN
 
-==============================================================
+>=1  Disallow CPU event access by users without CAP_SYS_ADMIN
+
+>=2  Disallow kernel profiling by users without CAP_SYS_ADMIN
+===  ==================================================================
+
 
 perf_event_max_stack:
+=====================
 
 Controls maximum number of stack frames to copy for (attr.sample_type &
 PERF_SAMPLE_CALLCHAIN) configured events, for instance, when using
@@ -718,17 +749,17 @@ enabled, otherwise writing to this file will return -EBUSY.
 
 The default value is 127.
 
-==============================================================
 
 perf_event_mlock_kb:
+====================
 
 Control size of per-cpu ring buffer not counted agains mlock limit.
 
 The default value is 512 + 1 page
 
-==============================================================
 
 perf_event_max_contexts_per_stack:
+==================================
 
 Controls maximum number of stack frame context entries for
 (attr.sample_type & PERF_SAMPLE_CALLCHAIN) configured events, for
@@ -739,25 +770,25 @@ enabled, otherwise writing to this file will return -EBUSY.
 
 The default value is 8.
 
-==============================================================
 
 pid_max:
+========
 
 PID allocation wrap value.  When the kernel's next PID value
 reaches this value, it wraps back to a minimum PID value.
 PIDs of value pid_max or larger are not allocated.
 
-==============================================================
 
 ns_last_pid:
+============
 
 The last pid allocated in the current (the one task using this sysctl
 lives in) pid namespace. When selecting a pid for a next task on fork
 kernel tries to allocate a number starting from this one.
 
-==============================================================
 
 powersave-nap: (PPC only)
+=========================
 
 If set, Linux-PPC will use the 'nap' mode of powersaving,
 otherwise the 'doze' mode will be used.
@@ -765,6 +796,7 @@ otherwise the 'doze' mode will be used.
 ==============================================================
 
 printk:
+=======
 
 The four values in printk denote: console_loglevel,
 default_message_loglevel, minimum_console_loglevel and
@@ -774,25 +806,29 @@ These values influence printk() behavior when printing or
 logging error messages. See 'man 2 syslog' for more info on
 the different loglevels.
 
-- console_loglevel: messages with a higher priority than
-  this will be printed to the console
-- default_message_loglevel: messages without an explicit priority
-  will be printed with this priority
-- minimum_console_loglevel: minimum (highest) value to which
-  console_loglevel can be set
-- default_console_loglevel: default value for console_loglevel
+- console_loglevel:
+	messages with a higher priority than
+	this will be printed to the console
+- default_message_loglevel:
+	messages without an explicit priority
+	will be printed with this priority
+- minimum_console_loglevel:
+	minimum (highest) value to which
+	console_loglevel can be set
+- default_console_loglevel:
+	default value for console_loglevel
 
-==============================================================
 
 printk_delay:
+=============
 
 Delay each printk message in printk_delay milliseconds
 
 Value from 0 - 10000 is allowed.
 
-==============================================================
 
 printk_ratelimit:
+=================
 
 Some warning messages are rate limited. printk_ratelimit specifies
 the minimum length of time between these messages (in jiffies), by
@@ -800,48 +836,52 @@ default we allow one every 5 seconds.
 
 A value of 0 will disable rate limiting.
 
-==============================================================
 
 printk_ratelimit_burst:
+=======================
 
 While long term we enforce one message per printk_ratelimit
 seconds, we do allow a burst of messages to pass through.
 printk_ratelimit_burst specifies the number of messages we can
 send before ratelimiting kicks in.
 
-==============================================================
 
 printk_devkmsg:
+===============
 
 Control the logging to /dev/kmsg from userspace:
 
-ratelimit: default, ratelimited
+ratelimit:
+	default, ratelimited
+
 on: unlimited logging to /dev/kmsg from userspace
+
 off: logging to /dev/kmsg disabled
 
 The kernel command line parameter printk.devkmsg= overrides this and is
 a one-time setting until next reboot: once set, it cannot be changed by
 this sysctl interface anymore.
 
-==============================================================
 
 randomize_va_space:
+===================
 
 This option can be used to select the type of process address
 space randomization that is used in the system, for architectures
 that support this feature.
 
-0 - Turn the process address space randomization off.  This is the
+==  ===========================================================================
+0   Turn the process address space randomization off.  This is the
     default for architectures that do not support this feature anyways,
     and kernels that are booted with the "norandmaps" parameter.
 
-1 - Make the addresses of mmap base, stack and VDSO page randomized.
+1   Make the addresses of mmap base, stack and VDSO page randomized.
     This, among other things, implies that shared libraries will be
     loaded to random addresses.  Also for PIE-linked binaries, the
     location of code start is randomized.  This is the default if the
     CONFIG_COMPAT_BRK option is enabled.
 
-2 - Additionally enable heap randomization.  This is the default if
+2   Additionally enable heap randomization.  This is the default if
     CONFIG_COMPAT_BRK is disabled.
 
     There are a few legacy applications out there (such as some ancient
@@ -854,18 +894,19 @@ that support this feature.
     Systems with ancient and/or broken binaries should be configured
     with CONFIG_COMPAT_BRK enabled, which excludes the heap from process
     address space randomization.
+==  ===========================================================================
 
-==============================================================
 
 reboot-cmd: (Sparc only)
+========================
 
 ??? This seems to be a way to give an argument to the Sparc
 ROM/Flash boot loader. Maybe to tell it what to do after
 rebooting. ???
 
-==============================================================
 
 rtsig-max & rtsig-nr:
+=====================
 
 The file rtsig-max can be used to tune the maximum number
 of POSIX realtime (queued) signals that can be outstanding
@@ -873,9 +914,9 @@ in the system.
 
 rtsig-nr shows the number of RT signals currently queued.
 
-==============================================================
 
 sched_energy_aware:
+===================
 
 Enables/disables Energy Aware Scheduling (EAS). EAS starts
 automatically on platforms where it can run (that is,
@@ -884,17 +925,17 @@ Model available). If your platform happens to meet the
 requirements for EAS but you do not want to use it, change
 this value to 0.
 
-==============================================================
 
 sched_schedstats:
+=================
 
 Enables/disables scheduler statistics. Enabling this feature
 incurs a small amount of overhead in the scheduler but is
 useful for debugging and performance tuning.
 
-==============================================================
 
 sg-big-buff:
+============
 
 This file shows the size of the generic SCSI (sg) buffer.
 You can't tune it just yet, but you could change it on
@@ -905,9 +946,9 @@ There shouldn't be any reason to change this value. If
 you can come up with one, you probably know what you
 are doing anyway :)
 
-==============================================================
 
 shmall:
+=======
 
 This parameter sets the total amount of shared memory pages that
 can be used system wide. Hence, SHMALL should always be at least
@@ -916,20 +957,20 @@ ceil(shmmax/PAGE_SIZE).
 If you are not sure what the default PAGE_SIZE is on your Linux
 system, you can run the following command:
 
-# getconf PAGE_SIZE
+	# getconf PAGE_SIZE
 
-==============================================================
 
 shmmax:
+=======
 
 This value can be used to query and set the run time limit
 on the maximum shared memory segment size that can be created.
 Shared memory segments up to 1Gb are now supported in the
 kernel.  This value defaults to SHMMAX.
 
-==============================================================
 
 shm_rmid_forced:
+================
 
 Linux lets you set resource limits, including how much memory one
 process can consume, via setrlimit(2).  Unfortunately, shared memory
@@ -948,28 +989,30 @@ need this.
 Note that if you change this from 0 to 1, already created segments
 without users and with a dead originative process will be destroyed.
 
-==============================================================
 
 sysctl_writes_strict:
+=====================
 
 Control how file position affects the behavior of updating sysctl values
 via the /proc/sys interface:
 
-  -1 - Legacy per-write sysctl value handling, with no printk warnings.
+  ==   ======================================================================
+  -1   Legacy per-write sysctl value handling, with no printk warnings.
        Each write syscall must fully contain the sysctl value to be
        written, and multiple writes on the same sysctl file descriptor
        will rewrite the sysctl value, regardless of file position.
-   0 - Same behavior as above, but warn about processes that perform writes
+   0   Same behavior as above, but warn about processes that perform writes
        to a sysctl file descriptor when the file position is not 0.
-   1 - (default) Respect file position when writing sysctl strings. Multiple
+   1   (default) Respect file position when writing sysctl strings. Multiple
        writes will append to the sysctl value buffer. Anything past the max
        length of the sysctl value buffer will be ignored. Writes to numeric
        sysctl entries must always be at file position 0 and the value must
        be fully contained in the buffer sent in the write syscall.
+  ==   ======================================================================
 
-==============================================================
 
 softlockup_all_cpu_backtrace:
+=============================
 
 This value controls the soft lockup detector thread's behavior
 when a soft lockup condition is detected as to whether or not
@@ -983,13 +1026,14 @@ NMI.
 
 1: on detection capture more debug information.
 
-==============================================================
 
-soft_watchdog
+soft_watchdog:
+==============
 
 This parameter can be used to control the soft lockup detector.
 
    0 - disable the soft lockup detector
+
    1 - enable the soft lockup detector
 
 The soft lockup detector monitors CPUs for threads that are hogging the CPUs
@@ -999,9 +1043,9 @@ interrupts which are needed for the 'watchdog/N' threads to be woken up by
 the watchdog timer function, otherwise the NMI watchdog - if enabled - can
 detect a hard lockup condition.
 
-==============================================================
 
-stack_erasing
+stack_erasing:
+==============
 
 This parameter can be used to control kernel stack erasing at the end
 of syscalls for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK.
@@ -1015,37 +1059,40 @@ compilation sees a 1% slowdown, other systems and workloads may vary.
 
   1: kernel stack erasing is enabled (default), it is performed before
      returning to the userspace at the end of syscalls.
-==============================================================
+
 
 tainted
+=======
 
 Non-zero if the kernel has been tainted. Numeric values, which can be
 ORed together. The letters are seen in "Tainted" line of Oops reports.
 
-     1 (P): proprietary module was loaded
-     2 (F): module was force loaded
-     4 (S): SMP kernel oops on an officially SMP incapable processor
-     8 (R): module was force unloaded
-    16 (M): processor reported a Machine Check Exception (MCE)
-    32 (B): bad page referenced or some unexpected page flags
-    64 (U): taint requested by userspace application
-   128 (D): kernel died recently, i.e. there was an OOPS or BUG
-   256 (A): an ACPI table was overridden by user
-   512 (W): kernel issued warning
-  1024 (C): staging driver was loaded
-  2048 (I): workaround for bug in platform firmware applied
-  4096 (O): externally-built ("out-of-tree") module was loaded
-  8192 (E): unsigned module was loaded
- 16384 (L): soft lockup occurred
- 32768 (K): kernel has been live patched
- 65536 (X): Auxiliary taint, defined and used by for distros
-131072 (T): The kernel was built with the struct randomization plugin
+======  =====  ==============================================================
+     1  `(P)`  proprietary module was loaded
+     2  `(F)`  module was force loaded
+     4  `(S)`  SMP kernel oops on an officially SMP incapable processor
+     8  `(R)`  module was force unloaded
+    16  `(M)`  processor reported a Machine Check Exception (MCE)
+    32  `(B)`  bad page referenced or some unexpected page flags
+    64  `(U)`  taint requested by userspace application
+   128  `(D)`  kernel died recently, i.e. there was an OOPS or BUG
+   256  `(A)`  an ACPI table was overridden by user
+   512  `(W)`  kernel issued warning
+  1024  `(C)`  staging driver was loaded
+  2048  `(I)`  workaround for bug in platform firmware applied
+  4096  `(O)`  externally-built ("out-of-tree") module was loaded
+  8192  `(E)`  unsigned module was loaded
+ 16384  `(L)`  soft lockup occurred
+ 32768  `(K)`  kernel has been live patched
+ 65536  `(X)`  Auxiliary taint, defined and used by for distros
+131072  `(T)`  The kernel was built with the struct randomization plugin
+======  =====  ==============================================================
 
 See Documentation/admin-guide/tainted-kernels.rst for more information.
 
-==============================================================
 
-threads-max
+threads-max:
+============
 
 This value controls the maximum number of threads that can be created
 using fork().
@@ -1055,8 +1102,10 @@ maximum number of threads is created, the thread structures occupy only
 a part (1/8th) of the available RAM pages.
 
 The minimum value that can be written to threads-max is 20.
+
 The maximum value that can be written to threads-max is given by the
 constant FUTEX_TID_MASK (0x3fffffff).
+
 If a value outside of this range is written to threads-max an error
 EINVAL occurs.
 
@@ -1064,9 +1113,9 @@ The value written is checked against the available RAM pages. If the
 thread structures would occupy too much (more than 1/8th) of the
 available RAM pages threads-max is reduced accordingly.
 
-==============================================================
 
 unknown_nmi_panic:
+==================
 
 The value in this file affects behavior of handling NMI. When the
 value is non-zero, unknown NMI is trapped and then panic occurs. At
@@ -1075,28 +1124,29 @@ that time, kernel debugging information is displayed on console.
 NMI switch that most IA32 servers have fires unknown NMI up, for
 example.  If a system hangs up, try pressing the NMI switch.
 
-==============================================================
 
 watchdog:
+=========
 
 This parameter can be used to disable or enable the soft lockup detector
 _and_ the NMI watchdog (i.e. the hard lockup detector) at the same time.
 
    0 - disable both lockup detectors
+
    1 - enable both lockup detectors
 
 The soft lockup detector and the NMI watchdog can also be disabled or
 enabled individually, using the soft_watchdog and nmi_watchdog parameters.
-If the watchdog parameter is read, for example by executing
+If the watchdog parameter is read, for example by executing::
 
    cat /proc/sys/kernel/watchdog
 
 the output of this command (0 or 1) shows the logical OR of soft_watchdog
 and nmi_watchdog.
 
-==============================================================
 
 watchdog_cpumask:
+=================
 
 This value can be used to control on which cpus the watchdog may run.
 The default cpumask is all possible cores, but if NO_HZ_FULL is
@@ -1111,13 +1161,13 @@ if a kernel lockup was suspected on those cores.
 
 The argument value is the standard cpulist format for cpumasks,
 so for example to enable the watchdog on cores 0, 2, 3, and 4 you
-might say:
+might say::
 
   echo 0,2-4 > /proc/sys/kernel/watchdog_cpumask
 
-==============================================================
 
 watchdog_thresh:
+================
 
 This value can be used to control the frequency of hrtimer and NMI
 events and the soft and hard lockup thresholds. The default threshold
@@ -1125,5 +1175,3 @@ is 10 seconds.
 
 The softlockup threshold is (2 * watchdog_thresh). Setting this
 tunable to zero will disable lockup detection altogether.
-
-==============================================================
diff --git a/Documentation/sysctl/net.txt b/Documentation/admin-guide/sysctl/net.rst
index 2ae91d3873bb..a7d44e71019d 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -1,12 +1,25 @@
-Documentation for /proc/sys/net/*
-	(c) 1999		Terrehon Bowden <terrehon@pacbell.net>
-				Bodo Bauer <bb@ricochet.net>
-	(c) 2000		Jorge Nerin <comandante@zaralinux.com>
-	(c) 2009		Shen Feng <shen@cn.fujitsu.com>
+================================
+Documentation for /proc/sys/net/
+================================
 
-For general info and legal blurb, please look in README.
+Copyright
 
-==============================================================
+Copyright (c) 1999
+
+	- Terrehon Bowden <terrehon@pacbell.net>
+	- Bodo Bauer <bb@ricochet.net>
+
+Copyright (c) 2000
+
+	- Jorge Nerin <comandante@zaralinux.com>
+
+Copyright (c) 2009
+
+	- Shen Feng <shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/net
@@ -17,20 +30,22 @@ see only some of them, depending on your kernel's configuration.
 
 
 Table : Subdirectories in /proc/sys/net
-..............................................................................
- Directory Content             Directory  Content
- core      General parameter   appletalk  Appletalk protocol
- unix      Unix domain sockets netrom     NET/ROM
- 802       E802 protocol       ax25       AX25
- ethernet  Ethernet protocol   rose       X.25 PLP layer
- ipv4      IP version 4        x25        X.25 protocol
- ipx       IPX                 token-ring IBM token ring
- bridge    Bridging            decnet     DEC net
- ipv6      IP version 6        tipc       TIPC
-..............................................................................
+
+ ========= =================== = ========== ==================
+ Directory Content               Directory  Content
+ ========= =================== = ========== ==================
+ core      General parameter     appletalk  Appletalk protocol
+ unix      Unix domain sockets   netrom     NET/ROM
+ 802       E802 protocol         ax25       AX25
+ ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ipv4      IP version 4          x25        X.25 protocol
+ ipx       IPX                   token-ring IBM token ring
+ bridge    Bridging              decnet     DEC net
+ ipv6      IP version 6          tipc       TIPC
+ ========= =================== = ========== ==================
 
 1. /proc/sys/net/core - Network core options
--------------------------------------------------------
+============================================
 
 bpf_jit_enable
 --------------
@@ -44,6 +59,7 @@ restricted C into a sequence of BPF instructions. After program load
 through bpf(2) and passing a verifier in the kernel, a JIT will then
 translate these BPF proglets into native CPU instructions. There are
 two flavors of JITs, the newer eBPF JIT currently supported on:
+
   - x86_64
   - x86_32
   - arm64
@@ -55,6 +71,7 @@ two flavors of JITs, the newer eBPF JIT currently supported on:
   - riscv
 
 And the older cBPF JIT supported on the following archs:
+
   - mips
   - ppc
   - sparc
@@ -65,10 +82,11 @@ compile them transparently. Older cBPF JITs can only translate
 tcpdump filters, seccomp rules, etc, but not mentioned eBPF
 programs loaded through bpf(2).
 
-Values :
-	0 - disable the JIT (default value)
-	1 - enable the JIT
-	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+Values:
+
+	- 0 - disable the JIT (default value)
+	- 1 - enable the JIT
+	- 2 - enable the JIT and ask the compiler to emit traces on kernel log.
 
 bpf_jit_harden
 --------------
@@ -76,10 +94,12 @@ bpf_jit_harden
 This enables hardening for the BPF JIT compiler. Supported are eBPF
 JIT backends. Enabling hardening trades off performance, but can
 mitigate JIT spraying.
-Values :
-	0 - disable JIT hardening (default value)
-	1 - enable JIT hardening for unprivileged users only
-	2 - enable JIT hardening for all users
+
+Values:
+
+	- 0 - disable JIT hardening (default value)
+	- 1 - enable JIT hardening for unprivileged users only
+	- 2 - enable JIT hardening for all users
 
 bpf_jit_kallsyms
 ----------------
@@ -89,9 +109,11 @@ addresses to the kernel, meaning they neither show up in traces nor
 in /proc/kallsyms. This enables export of these addresses, which can
 be used for debugging/tracing. If bpf_jit_harden is enabled, this
 feature is disabled.
+
 Values :
-	0 - disable JIT kallsyms export (default value)
-	1 - enable JIT kallsyms export for privileged users only
+
+	- 0 - disable JIT kallsyms export (default value)
+	- 1 - enable JIT kallsyms export for privileged users only
 
 bpf_jit_limit
 -------------
@@ -102,7 +124,7 @@ been surpassed. bpf_jit_limit contains the value of the global limit
 in bytes.
 
 dev_weight
---------------
+----------
 
 The maximum number of packets that kernel can handle on a NAPI interrupt,
 it's a Per-CPU variable. For drivers that support LRO or GRO_HW, a hardware
@@ -111,7 +133,7 @@ aggregated packet is counted as one packet in this context.
 Default: 64
 
 dev_weight_rx_bias
---------------
+------------------
 
 RPS (e.g. RFS, aRFS) processing is competing with the registered NAPI poll function
 of the driver for the per softirq cycle netdev_budget. This parameter influences
@@ -120,19 +142,22 @@ processing during RX softirq cycles. It is further meant for making current
 dev_weight adaptable for asymmetric CPU needs on RX/TX side of the network stack.
 (see dev_weight_tx_bias) It is effective on a per CPU basis. Determination is based
 on dev_weight and is calculated multiplicative (dev_weight * dev_weight_rx_bias).
+
 Default: 1
 
 dev_weight_tx_bias
---------------
+------------------
 
 Scales the maximum number of packets that can be processed during a TX softirq cycle.
 Effective on a per CPU basis. Allows scaling of current dev_weight for asymmetric
 net stack processing needs. Be careful to avoid making TX softirq processing a CPU hog.
+
 Calculation is based on dev_weight (dev_weight * dev_weight_tx_bias).
+
 Default: 1
 
 default_qdisc
---------------
+-------------
 
 The default queuing discipline to use for network devices. This allows
 overriding the default of pfifo_fast with an alternative. Since the default
@@ -144,17 +169,21 @@ which require setting up classes and bandwidths. Note that physical multiqueue
 interfaces still use mq as root qdisc, which in turn uses this default for its
 leaves. Virtual devices (like e.g. lo or veth) ignore this setting and instead
 default to noqueue.
+
 Default: pfifo_fast
 
 busy_read
-----------------
+---------
+
 Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for packets on the device queue.
 This sets the default value of the SO_BUSY_POLL socket option.
 Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
 which is the preferred method of enabling. If you need to enable the feature
 globally via sysctl, a value of 50 is recommended.
+
 Will increase power usage.
+
 Default: 0 (off)
 
 busy_poll
@@ -167,7 +196,9 @@ For more than that you probably want to use epoll.
 Note that only sockets with SO_BUSY_POLL set will be busy polled,
 so you want to either selectively set SO_BUSY_POLL on those sockets or set
 sysctl.net.busy_read globally.
+
 Will increase power usage.
+
 Default: 0 (off)
 
 rmem_default
@@ -185,6 +216,7 @@ tstamp_allow_data
 Allow processes to receive tx timestamps looped together with the original
 packet contents. If disabled, transmit timestamp requests from unprivileged
 processes are dropped unless socket option SOF_TIMESTAMPING_OPT_TSONLY is set.
+
 Default: 1 (on)
 
 
@@ -250,19 +282,24 @@ randomly generated.
 Some user space might need to gather its content even if drivers do not
 provide ethtool -x support yet.
 
-myhost:~# cat /proc/sys/net/core/netdev_rss_key
-84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
+::
+
+  myhost:~# cat /proc/sys/net/core/netdev_rss_key
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
 
 File contains nul bytes if no driver ever called netdev_rss_key_fill() function.
+
 Note:
-/proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
-but most drivers only use 40 bytes of it.
+  /proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
+  but most drivers only use 40 bytes of it.
+
+::
 
-myhost:~# ethtool -x eth0
-RX flow hash indirection table for eth0 with 8 RX ring(s):
-    0:    0     1     2     3     4     5     6     7
-RSS hash key:
-84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
+  myhost:~# ethtool -x eth0
+  RX flow hash indirection table for eth0 with 8 RX ring(s):
+      0:    0     1     2     3     4     5     6     7
+  RSS hash key:
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
 
 netdev_tstamp_prequeue
 ----------------------
@@ -293,7 +330,7 @@ user space is responsible for creating them if needed.
 Default : 0  (for compatibility reasons)
 
 devconf_inherit_init_net
-----------------------------
+------------------------
 
 Controls if a new network namespace should inherit all current
 settings under /proc/sys/net/{ipv4,ipv6}/conf/{all,default}/. By
@@ -307,7 +344,7 @@ forced to reset to their default values.
 Default : 0  (for compatibility reasons)
 
 2. /proc/sys/net/unix - Parameters for Unix domain sockets
--------------------------------------------------------
+----------------------------------------------------------
 
 There is only one file in this directory.
 unix_dgram_qlen limits the max number of datagrams queued in Unix domain
@@ -315,13 +352,13 @@ socket's buffer. It will not take effect unless PF_UNIX flag is specified.
 
 
 3. /proc/sys/net/ipv4 - IPV4 settings
--------------------------------------------------------
+-------------------------------------
 Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
 descriptions of these entries.
 
 
 4. Appletalk
--------------------------------------------------------
+------------
 
 The /proc/sys/net/appletalk  directory  holds the Appletalk configuration data
 when Appletalk is loaded. The configurable parameters are:
@@ -366,7 +403,7 @@ route flags, and the device the route is using.
 
 
 5. IPX
--------------------------------------------------------
+------
 
 The IPX protocol has no tunable values in proc/sys/net.
 
@@ -391,14 +428,16 @@ gives the  destination  network, the router node (or Directly) and the network
 address of the router (or Connected) for internal networks.
 
 6. TIPC
--------------------------------------------------------
+-------
 
 tipc_rmem
-----------
+---------
 
 The TIPC protocol now has a tunable for the receive memory, similar to the
 tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max)
 
+::
+
     # cat /proc/sys/net/tipc/tipc_rmem
     4252725 34021800        68043600
     #
@@ -409,7 +448,7 @@ is not at this point in time used in any meaningful way, but the triplet is
 preserved in order to be consistent with things like tcp_rmem.
 
 named_timeout
---------------
+-------------
 
 TIPC name table updates are distributed asynchronously in a cluster, without
 any form of transaction handling. This means that different race scenarios are
diff --git a/Documentation/sysctl/sunrpc.txt b/Documentation/admin-guide/sysctl/sunrpc.rst
index ae1ecac6f85a..09780a682afd 100644
--- a/Documentation/sysctl/sunrpc.txt
+++ b/Documentation/admin-guide/sysctl/sunrpc.rst
@@ -1,9 +1,14 @@
-Documentation for /proc/sys/sunrpc/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+===================================
+Documentation for /proc/sys/sunrpc/
+===================================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/sunrpc and is valid for Linux kernel version 2.2.
diff --git a/Documentation/sysctl/user.txt b/Documentation/admin-guide/sysctl/user.rst
index a5882865836e..650eaa03f15e 100644
--- a/Documentation/sysctl/user.txt
+++ b/Documentation/admin-guide/sysctl/user.rst
@@ -1,7 +1,12 @@
-Documentation for /proc/sys/user/*	kernel version 4.9.0
-	(c) 2016		Eric Biederman <ebiederm@xmission.com>
+=================================
+Documentation for /proc/sys/user/
+=================================
 
-==============================================================
+kernel version 4.9.0
+
+Copyright (c) 2016		Eric Biederman <ebiederm@xmission.com>
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/user.
@@ -30,37 +35,44 @@ user namespace does not allow a user to escape their current limits.
 
 Currently, these files are in /proc/sys/user:
 
-- max_cgroup_namespaces
+max_cgroup_namespaces
+=====================
 
   The maximum number of cgroup namespaces that any user in the current
   user namespace may create.
 
-- max_ipc_namespaces
+max_ipc_namespaces
+==================
 
   The maximum number of ipc namespaces that any user in the current
   user namespace may create.
 
-- max_mnt_namespaces
+max_mnt_namespaces
+==================
 
   The maximum number of mount namespaces that any user in the current
   user namespace may create.
 
-- max_net_namespaces
+max_net_namespaces
+==================
 
   The maximum number of network namespaces that any user in the
   current user namespace may create.
 
-- max_pid_namespaces
+max_pid_namespaces
+==================
 
   The maximum number of pid namespaces that any user in the current
   user namespace may create.
 
-- max_user_namespaces
+max_user_namespaces
+===================
 
   The maximum number of user namespaces that any user in the current
   user namespace may create.
 
-- max_uts_namespaces
+max_uts_namespaces
+==================
 
   The maximum number of user namespaces that any user in the current
   user namespace may create.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/admin-guide/sysctl/vm.rst
index 749322060f10..64aeee1009ca 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/vm/*	kernel version 2.6.29
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2008         Peter W. Morreale <pmorreale@novell.com>
+===============================
+Documentation for /proc/sys/vm/
+===============================
 
-For general info and legal blurb, please look in README.
+kernel version 2.6.29
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2008         Peter W. Morreale <pmorreale@novell.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/vm and is valid for Linux kernel version 2.6.29.
@@ -68,9 +74,9 @@ Currently, these files are in /proc/sys/vm:
 - watermark_scale_factor
 - zone_reclaim_mode
 
-==============================================================
 
 admin_reserve_kbytes
+====================
 
 The amount of free memory in the system that should be reserved for users
 with the capability cap_sys_admin.
@@ -97,25 +103,25 @@ On x86_64 this is about 128MB.
 
 Changing this takes effect whenever an application requests memory.
 
-==============================================================
 
 block_dump
+==========
 
 block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
+information on block I/O debugging is in Documentation/admin-guide/laptops/laptop-mode.rst.
 
-==============================================================
 
 compact_memory
+==============
 
 Available only when CONFIG_COMPACTION is set. When 1 is written to the file,
 all zones are compacted such that free memory is available in contiguous
 blocks where possible. This can be important for example in the allocation of
 huge pages although processes will also directly compact memory as required.
 
-==============================================================
 
 compact_unevictable_allowed
+===========================
 
 Available only when CONFIG_COMPACTION is set. When set to 1, compaction is
 allowed to examine the unevictable lru (mlocked pages) for pages to compact.
@@ -123,21 +129,22 @@ This should be used on systems where stalls for minor page faults are an
 acceptable trade for large contiguous free memory.  Set to 0 to prevent
 compaction from moving pages that are unevictable.  Default value is 1.
 
-==============================================================
 
 dirty_background_bytes
+======================
 
 Contains the amount of dirty memory at which the background kernel
 flusher threads will start writeback.
 
-Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
-one of them may be specified at a time. When one sysctl is written it is
-immediately taken into account to evaluate the dirty memory limits and the
-other appears as 0 when read.
+Note:
+  dirty_background_bytes is the counterpart of dirty_background_ratio. Only
+  one of them may be specified at a time. When one sysctl is written it is
+  immediately taken into account to evaluate the dirty memory limits and the
+  other appears as 0 when read.
 
-==============================================================
 
 dirty_background_ratio
+======================
 
 Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which the background kernel
@@ -145,9 +152,9 @@ flusher threads will start writing out dirty data.
 
 The total available memory is not equal to total system memory.
 
-==============================================================
 
 dirty_bytes
+===========
 
 Contains the amount of dirty memory at which a process generating disk writes
 will itself start writeback.
@@ -161,18 +168,18 @@ Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
 value lower than this limit will be ignored and the old configuration will be
 retained.
 
-==============================================================
 
 dirty_expire_centisecs
+======================
 
 This tunable is used to define when dirty data is old enough to be eligible
 for writeout by the kernel flusher threads.  It is expressed in 100'ths
 of a second.  Data which has been dirty in-memory for longer than this
 interval will be written out next time a flusher thread wakes up.
 
-==============================================================
 
 dirty_ratio
+===========
 
 Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which a process which is
@@ -180,9 +187,9 @@ generating disk writes will itself start writing out dirty data.
 
 The total available memory is not equal to total system memory.
 
-==============================================================
 
 dirtytime_expire_seconds
+========================
 
 When a lazytime inode is constantly having its pages dirtied, the inode with
 an updated timestamp will never get chance to be written out.  And, if the
@@ -192,34 +199,39 @@ eventually gets pushed out to disk.  This tunable is used to define when dirty
 inode is old enough to be eligible for writeback by the kernel flusher threads.
 And, it is also used as the interval to wakeup dirtytime_writeback thread.
 
-==============================================================
 
 dirty_writeback_centisecs
+=========================
 
-The kernel flusher threads will periodically wake up and write `old' data
+The kernel flusher threads will periodically wake up and write `old` data
 out to disk.  This tunable expresses the interval between those wakeups, in
 100'ths of a second.
 
 Setting this to zero disables periodic writeback altogether.
 
-==============================================================
 
 drop_caches
+===========
 
 Writing to this will cause the kernel to drop clean caches, as well as
 reclaimable slab objects like dentries and inodes.  Once dropped, their
 memory becomes free.
 
-To free pagecache:
+To free pagecache::
+
 	echo 1 > /proc/sys/vm/drop_caches
-To free reclaimable slab objects (includes dentries and inodes):
+
+To free reclaimable slab objects (includes dentries and inodes)::
+
 	echo 2 > /proc/sys/vm/drop_caches
-To free slab objects and pagecache:
+
+To free slab objects and pagecache::
+
 	echo 3 > /proc/sys/vm/drop_caches
 
 This is a non-destructive operation and will not free any dirty objects.
 To increase the number of objects freed by this operation, the user may run
-`sync' prior to writing to /proc/sys/vm/drop_caches.  This will minimize the
+`sync` prior to writing to /proc/sys/vm/drop_caches.  This will minimize the
 number of dirty objects on the system and create more candidates to be
 dropped.
 
@@ -233,16 +245,16 @@ dropped objects, especially if they were under heavy use.  Because of this,
 use outside of a testing or debugging environment is not recommended.
 
 You may see informational messages in your kernel log when this file is
-used:
+used::
 
 	cat (1234): drop_caches: 3
 
 These are informational only.  They do not mean that anything is wrong
 with your system.  To disable them, echo 4 (bit 2) into drop_caches.
 
-==============================================================
 
 extfrag_threshold
+=================
 
 This parameter affects whether the kernel will compact memory or direct
 reclaim to satisfy a high-order allocation. The extfrag/extfrag_index file in
@@ -254,9 +266,9 @@ implies that the allocation will succeed as long as watermarks are met.
 The kernel will not compact memory in a zone if the
 fragmentation index is <= extfrag_threshold. The default value is 500.
 
-==============================================================
 
 highmem_is_dirtyable
+====================
 
 Available only for systems with CONFIG_HIGHMEM enabled (32b systems).
 
@@ -274,30 +286,30 @@ OOM killer because some writers (e.g. direct block device writes) can
 only use the low memory and they can fill it up with dirty data without
 any throttling.
 
-==============================================================
 
 hugetlb_shm_group
+=================
 
 hugetlb_shm_group contains group id that is allowed to create SysV
 shared memory segment using hugetlb page.
 
-==============================================================
 
 laptop_mode
+===========
 
 laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
+controlled by this knob are discussed in Documentation/admin-guide/laptops/laptop-mode.rst.
 
-==============================================================
 
 legacy_va_layout
+================
 
 If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel
 will use the legacy (2.4) layout for all processes.
 
-==============================================================
 
 lowmem_reserve_ratio
+====================
 
 For some specialised workloads on highmem machines it is dangerous for
 the kernel to allow process memory to be allocated from the "lowmem"
@@ -308,7 +320,7 @@ And on large highmem machines this lack of reclaimable lowmem memory
 can be fatal.
 
 So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem.  This means that
+which *could* use highmem from using too much lowmem.  This means that
 a certain amount of lowmem is defended from the possibility of being
 captured into pinned user memory.
 
@@ -316,39 +328,37 @@ captured into pinned user memory.
 mechanism will also defend that region from allocations which could use
 highmem or lowmem).
 
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+The `lowmem_reserve_ratio` tunable determines how aggressive the kernel is
 in defending these lower zones.
 
 If you have a machine which uses highmem or ISA DMA and your
 applications are using mlock(), or if you are running with no swap then
 you probably should change the lowmem_reserve_ratio setting.
 
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256     256     32
--
+The lowmem_reserve_ratio is an array. You can see them by reading this file::
+
+	% cat /proc/sys/vm/lowmem_reserve_ratio
+	256     256     32
 
 But, these values are not used directly. The kernel calculates # of protection
 pages for each zones from them. These are shown as array of protection pages
 in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
-
--
-Node 0, zone      DMA
-  pages free     1355
-        min      3
-        low      3
-        high     4
+Each zone has an array of protection pages like this::
+
+  Node 0, zone      DMA
+    pages free     1355
+          min      3
+          low      3
+          high     4
 	:
 	:
-    numa_other   0
-        protection: (0, 2004, 2004, 2004)
+      numa_other   0
+          protection: (0, 2004, 2004, 2004)
 	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-  pagesets
-    cpu: 0 pcp: 0
-        :
--
+    pagesets
+      cpu: 0 pcp: 0
+          :
+
 These protections are added to score to judge whether this zone should be used
 for page allocation or should be reclaimed.
 
@@ -359,20 +369,24 @@ not be used because pages_free(1355) is smaller than watermark + protection[2]
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
 
-zone[i]'s protection[j] is calculated by following expression.
+zone[i]'s protection[j] is calculated by following expression::
 
-(i < j):
-  zone[i]->protection[j]
-  = (total sums of managed_pages from zone[i+1] to zone[j] on the node)
-    / lowmem_reserve_ratio[i];
-(i = j):
-   (should not be protected. = 0;
-(i > j):
-   (not necessary, but looks 0)
+  (i < j):
+    zone[i]->protection[j]
+    = (total sums of managed_pages from zone[i+1] to zone[j] on the node)
+      / lowmem_reserve_ratio[i];
+  (i = j):
+     (should not be protected. = 0;
+  (i > j):
+     (not necessary, but looks 0)
 
 The default values of lowmem_reserve_ratio[i] are
+
+    === ====================================
     256 (if zone[i] means DMA or DMA32 zone)
-    32  (others).
+    32  (others)
+    === ====================================
+
 As above expression, they are reciprocal number of ratio.
 256 means 1/256. # of protection pages becomes about "0.39%" of total managed
 pages of higher zones on the node.
@@ -381,9 +395,9 @@ If you would like to protect more pages, smaller values are effective.
 The minimum value is 1 (1/1 -> 100%). The value less than 1 completely
 disables protection of the pages.
 
-==============================================================
 
 max_map_count:
+==============
 
 This file contains the maximum number of memory map areas a process
 may have. Memory map areas are used as a side-effect of calling
@@ -396,9 +410,9 @@ e.g., up to one or two maps per allocation.
 
 The default value is 65536.
 
-=============================================================
 
 memory_failure_early_kill:
+==========================
 
 Control how to kill processes when uncorrected memory error (typically
 a 2bit error in a memory module) is detected in the background by hardware
@@ -424,9 +438,9 @@ check handling and depends on the hardware capabilities.
 
 Applications can override this setting individually with the PR_MCE_KILL prctl
 
-==============================================================
 
 memory_failure_recovery
+=======================
 
 Enable memory failure recovery (when supported by the platform)
 
@@ -434,9 +448,9 @@ Enable memory failure recovery (when supported by the platform)
 
 0: Always panic on a memory failure.
 
-==============================================================
 
-min_free_kbytes:
+min_free_kbytes
+===============
 
 This is used to force the Linux VM to keep a minimum number
 of kilobytes free.  The VM uses this number to compute a
@@ -450,9 +464,9 @@ become subtly broken, and prone to deadlock under high loads.
 
 Setting this too high will OOM your machine instantly.
 
-=============================================================
 
-min_slab_ratio:
+min_slab_ratio
+==============
 
 This is available only on NUMA kernels.
 
@@ -468,9 +482,9 @@ Note that slab reclaim is triggered in a per zone / node fashion.
 The process of reclaiming slab memory is currently not node specific
 and may not be fast.
 
-=============================================================
 
-min_unmapped_ratio:
+min_unmapped_ratio
+==================
 
 This is available only on NUMA kernels.
 
@@ -485,9 +499,9 @@ files and similar are considered.
 
 The default is 1 percent.
 
-==============================================================
 
 mmap_min_addr
+=============
 
 This file indicates the amount of address space  which a user process will
 be restricted from mmapping.  Since kernel null dereference bugs could
@@ -498,9 +512,9 @@ security module.  Setting this value to something like 64k will allow the
 vast majority of applications to work correctly and provide defense in depth
 against future potential kernel bugs.
 
-==============================================================
 
-mmap_rnd_bits:
+mmap_rnd_bits
+=============
 
 This value can be used to select the number of bits to use to
 determine the random offset to the base address of vma regions
@@ -511,9 +525,9 @@ by the architecture's minimum and maximum supported values.
 This value can be changed after boot using the
 /proc/sys/vm/mmap_rnd_bits tunable
 
-==============================================================
 
-mmap_rnd_compat_bits:
+mmap_rnd_compat_bits
+====================
 
 This value can be used to select the number of bits to use to
 determine the random offset to the base address of vma regions
@@ -525,35 +539,35 @@ architecture's minimum and maximum supported values.
 This value can be changed after boot using the
 /proc/sys/vm/mmap_rnd_compat_bits tunable
 
-==============================================================
 
 nr_hugepages
+============
 
 Change the minimum size of the hugepage pool.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_hugepages_mempolicy
+======================
 
 Change the size of the hugepage pool at run-time on a specific
 set of NUMA nodes.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_overcommit_hugepages
+=======================
 
 Change the maximum size of the hugepage pool. The maximum is
 nr_hugepages + nr_overcommit_hugepages.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_trim_pages
+=============
 
 This is available only on NOMMU kernels.
 
@@ -568,16 +582,17 @@ The default value is 1.
 
 See Documentation/nommu-mmap.txt for more information.
 
-==============================================================
 
 numa_zonelist_order
+===================
 
 This sysctl is only for NUMA and it is deprecated. Anything but
 Node order will fail!
 
 'where the memory is allocated from' is controlled by zonelists.
+
 (This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation.
- you may be able to read ZONE_DMA as ZONE_DMA32...)
+you may be able to read ZONE_DMA as ZONE_DMA32...)
 
 In non-NUMA case, a zonelist for GFP_KERNEL is ordered as following.
 ZONE_NORMAL -> ZONE_DMA
@@ -585,10 +600,10 @@ This means that a memory allocation request for GFP_KERNEL will
 get memory from ZONE_DMA only when ZONE_NORMAL is not available.
 
 In NUMA case, you can think of following 2 types of order.
-Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL
+Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL::
 
-(A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL
-(B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA.
+  (A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL
+  (B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA.
 
 Type(A) offers the best locality for processes on Node(0), but ZONE_DMA
 will be used before ZONE_NORMAL exhaustion. This increases possibility of
@@ -616,9 +631,9 @@ order will be selected.
 Default order is recommended unless this is causing problems for your
 system/application.
 
-==============================================================
 
 oom_dump_tasks
+==============
 
 Enables a system-wide task dump (excluding kernel threads) to be produced
 when the kernel performs an OOM-killing and includes such information as
@@ -638,9 +653,9 @@ OOM killer actually kills a memory-hogging task.
 
 The default value is 1 (enabled).
 
-==============================================================
 
 oom_kill_allocating_task
+========================
 
 This enables or disables killing the OOM-triggering task in
 out-of-memory situations.
@@ -659,9 +674,9 @@ is used in oom_kill_allocating_task.
 
 The default value is 0.
 
-==============================================================
 
-overcommit_kbytes:
+overcommit_kbytes
+=================
 
 When overcommit_memory is set to 2, the committed address space is not
 permitted to exceed swap plus this amount of physical RAM. See below.
@@ -670,9 +685,9 @@ Note: overcommit_kbytes is the counterpart of overcommit_ratio. Only one
 of them may be specified at a time. Setting one disables the other (which
 then appears as 0 when read).
 
-==============================================================
 
-overcommit_memory:
+overcommit_memory
+=================
 
 This value contains a flag that enables memory overcommitment.
 
@@ -695,17 +710,17 @@ The default value is 0.
 See Documentation/vm/overcommit-accounting.rst and
 mm/util.c::__vm_enough_memory() for more information.
 
-==============================================================
 
-overcommit_ratio:
+overcommit_ratio
+================
 
 When overcommit_memory is set to 2, the committed address
 space is not permitted to exceed swap plus this percentage
 of physical RAM.  See above.
 
-==============================================================
 
 page-cluster
+============
 
 page-cluster controls the number of pages up to which consecutive pages
 are read in from swap in a single attempt. This is the swap counterpart
@@ -725,9 +740,9 @@ Lower values mean lower latencies for initial faults, but at the same time
 extra faults and I/O delays for following faults if they would have been part of
 that consecutive pages readahead would have brought in.
 
-=============================================================
 
 panic_on_oom
+============
 
 This enables or disables panic on out-of-memory feature.
 
@@ -747,14 +762,16 @@ above-mentioned. Even oom happens under memory cgroup, the whole
 system panics.
 
 The default value is 0.
+
 1 and 2 are for failover of clustering. Please select either
 according to your policy of failover.
+
 panic_on_oom=2+kdump gives you very strong tool to investigate
 why oom happens. You can get snapshot.
 
-=============================================================
 
 percpu_pagelist_fraction
+========================
 
 This is the fraction of pages at most (high mark pcp->high) in each zone that
 are allocated for each per cpu page list.  The min value for this is 8.  It
@@ -770,16 +787,16 @@ The initial value is zero.  Kernel does not use this value at boot time to set
 the high water marks for each per cpu page list.  If the user writes '0' to this
 sysctl, it will revert to this default behavior.
 
-==============================================================
 
 stat_interval
+=============
 
 The time interval between which vm statistics are updated.  The default
 is 1 second.
 
-==============================================================
 
 stat_refresh
+============
 
 Any read or write (by root only) flushes all the per-cpu vm statistics
 into their global totals, for more accurate reports when testing
@@ -790,24 +807,26 @@ as 0) and "fails" with EINVAL if any are found, with a warning in dmesg.
 (At time of writing, a few stats are known sometimes to be found negative,
 with no ill effects: errors and warnings on these stats are suppressed.)
 
-==============================================================
 
 numa_stat
+=========
 
 This interface allows runtime configuration of numa statistics.
 
 When page allocation performance becomes a bottleneck and you can tolerate
 some possible tool breakage and decreased numa counter precision, you can
-do:
+do::
+
 	echo 0 > /proc/sys/vm/numa_stat
 
 When page allocation performance is not a bottleneck and you want all
-tooling to work, you can do:
+tooling to work, you can do::
+
 	echo 1 > /proc/sys/vm/numa_stat
 
-==============================================================
 
 swappiness
+==========
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase aggressiveness, lower values
@@ -817,9 +836,9 @@ than the high water mark in a zone.
 
 The default value is 60.
 
-==============================================================
 
 unprivileged_userfaultfd
+========================
 
 This flag controls whether unprivileged users can use the userfaultfd
 system calls.  Set this to 1 to allow unprivileged users to use the
@@ -828,9 +847,9 @@ privileged users (with SYS_CAP_PTRACE capability).
 
 The default value is 1.
 
-==============================================================
 
-- user_reserve_kbytes
+user_reserve_kbytes
+===================
 
 When overcommit_memory is set to 2, "never overcommit" mode, reserve
 min(3% of current process size, user_reserve_kbytes) of free memory.
@@ -846,10 +865,9 @@ Any subsequent attempts to execute a command will result in
 
 Changing this takes effect whenever an application requests memory.
 
-==============================================================
 
 vfs_cache_pressure
-------------------
+==================
 
 This percentage value controls the tendency of the kernel to reclaim
 the memory which is used for caching of directory and inode objects.
@@ -867,9 +885,9 @@ performance impact. Reclaim code needs to take various locks to find freeable
 directory and inode objects. With vfs_cache_pressure=1000, it will look for
 ten times more freeable objects than there are.
 
-=============================================================
 
-watermark_boost_factor:
+watermark_boost_factor
+======================
 
 This factor controls the level of reclaim when memory is being fragmented.
 It defines the percentage of the high watermark of a zone that will be
@@ -887,9 +905,9 @@ fragmentation events that occurred in the recent past. If this value is
 smaller than a pageblock then a pageblocks worth of pages will be reclaimed
 (e.g.  2MB on 64-bit x86). A boost factor of 0 will disable the feature.
 
-=============================================================
 
-watermark_scale_factor:
+watermark_scale_factor
+======================
 
 This factor controls the aggressiveness of kswapd. It defines the
 amount of memory left in a node/system before kswapd is woken up and
@@ -905,20 +923,22 @@ that the number of free pages kswapd maintains for latency reasons is
 too small for the allocation bursts occurring in the system. This knob
 can then be used to tune kswapd aggressiveness accordingly.
 
-==============================================================
 
-zone_reclaim_mode:
+zone_reclaim_mode
+=================
 
 Zone_reclaim_mode allows someone to set more or less aggressive approaches to
 reclaim memory when a zone runs out of memory. If it is set to zero then no
 zone reclaim occurs. Allocations will be satisfied from other zones / nodes
 in the system.
 
-This is value ORed together of
+This is value OR'ed together of
 
-1	= Zone reclaim on
-2	= Zone reclaim writes dirty pages out
-4	= Zone reclaim swaps pages
+=	===================================
+1	Zone reclaim on
+2	Zone reclaim writes dirty pages out
+4	Zone reclaim swaps pages
+=	===================================
 
 zone_reclaim_mode is disabled by default.  For file servers or workloads
 that benefit from having their data cached, zone_reclaim_mode should be
@@ -942,5 +962,3 @@ of other processes running on other nodes will not be affected.
 Allowing regular swap effectively restricts allocations to the local
 node unless explicitly overridden by memory policies or cpuset
 configurations.
-
-============ End of Document =================================
diff --git a/Documentation/video-output.txt b/Documentation/admin-guide/video-output.rst
index 56d6fa2e2368..56d6fa2e2368 100644
--- a/Documentation/video-output.txt
+++ b/Documentation/admin-guide/video-output.rst
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
deleted file mode 100644
index 56ada27c53be..000000000000
--- a/Documentation/arm/Marvell/README
+++ /dev/null
@@ -1,395 +0,0 @@
-ARM Marvell SoCs
-================
-
-This document lists all the ARM Marvell SoCs that are currently
-supported in mainline by the Linux kernel. As the Marvell families of
-SoCs are large and complex, it is hard to understand where the support
-for a particular SoC is available in the Linux kernel. This document
-tries to help in understanding where those SoCs are supported, and to
-match them with their corresponding public datasheet, when available.
-
-Orion family
-------------
-
-  Flavors:
-        88F5082
-        88F5181
-        88F5181L
-        88F5182
-               Datasheet               : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf
-               Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
-               User Manual             : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
-        88F5281
-               Datasheet               : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
-        88F6183
-  Core: Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
-  Linux kernel mach directory: arch/arm/mach-orion5x
-  Linux kernel plat directory: arch/arm/plat-orion
-
-Kirkwood family
----------------
-
-  Flavors:
-        88F6282 a.k.a Armada 300
-                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
-        88F6283 a.k.a Armada 310
-                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
-        88F6190
-                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        88F6192
-                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        88F6182
-        88F6180
-                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-        88F6281
-                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
-  Homepage: http://www.marvell.com/embedded-processors/kirkwood/
-  Core: Feroceon 88fr131 ARMv5 compatible
-  Linux kernel mach directory: arch/arm/mach-mvebu
-  Linux kernel plat directory: none
-
-Discovery family
-----------------
-
-  Flavors:
-        MV78100
-                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
-        MV78200
-                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
-                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
-                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
-        MV76100
-                Not supported by the Linux kernel.
-
-  Core: Feroceon 88fr571-vd ARMv5 compatible
-
-  Linux kernel mach directory: arch/arm/mach-mv78xx0
-  Linux kernel plat directory: arch/arm/plat-orion
-
-EBU Armada family
------------------
-
-  Armada 370 Flavors:
-        88F6710
-        88F6707
-        88F6W11
-    Product Brief:   http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
-    Hardware Spec:   http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
-    Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
-    Core: Sheeva ARMv7 compatible PJ4B
-
-  Armada 375 Flavors:
-	88F6720
-    Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
-    Core: ARM Cortex-A9
-
-  Armada 38x Flavors:
-	88F6810	Armada 380
-	88F6820 Armada 385
-	88F6828 Armada 388
-    Product infos:   http://www.marvell.com/embedded-processors/armada-38x/
-    Functional Spec: https://marvellcorp.wufoo.com/forms/marvell-armada-38x-functional-specifications/
-    Core: ARM Cortex-A9
-
-  Armada 39x Flavors:
-	88F6920 Armada 390
-	88F6928 Armada 398
-    Product infos: http://www.marvell.com/embedded-processors/armada-39x/
-    Core: ARM Cortex-A9
-
-  Armada XP Flavors:
-        MV78230
-        MV78260
-        MV78460
-    NOTE: not to be confused with the non-SMP 78xx0 SoCs
-    Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
-    Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
-    Hardware Specs:
-      http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
-      http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
-      http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
-    Core: Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
-
-  Linux kernel mach directory: arch/arm/mach-mvebu
-  Linux kernel plat directory: none
-
-EBU Armada family ARMv8
------------------------
-
-  Armada 3710/3720 Flavors:
-	88F3710
-	88F3720
-	Core: ARM Cortex A53 (ARMv8)
-
-	Homepage: http://www.marvell.com/embedded-processors/armada-3700/
-	Product Brief: http://www.marvell.com/embedded-processors/assets/PB-88F3700-FNL.pdf
-	Device tree files: arch/arm64/boot/dts/marvell/armada-37*
-
-  Armada 7K Flavors:
-	88F7020 (AP806 Dual + one CP110)
-	88F7040 (AP806 Quad + one CP110)
-	Core: ARM Cortex A72
-
-	Homepage: http://www.marvell.com/embedded-processors/armada-70xx/
-	Product Brief: http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf
-		       http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf
-	Device tree files: arch/arm64/boot/dts/marvell/armada-70*
-
-  Armada 8K Flavors:
-	88F8020 (AP806 Dual + two CP110)
-	88F8040 (AP806 Quad + two CP110)
-	Core: ARM Cortex A72
-
-	Homepage: http://www.marvell.com/embedded-processors/armada-80xx/
-	Product Brief: http://www.marvell.com/embedded-processors/assets/Armada8020PB-Jan2016.pdf
-		       http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf
-	Device tree files: arch/arm64/boot/dts/marvell/armada-80*
-
-Avanta family
--------------
-
-  Flavors:
-       88F6510
-       88F6530P
-       88F6550
-       88F6560
-  Homepage     : http://www.marvell.com/broadband/
-  Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
-  No public datasheet available.
-
-  Core: ARMv5 compatible
-
-  Linux kernel mach directory: no code in mainline yet, planned for the future
-  Linux kernel plat directory: no code in mainline yet, planned for the future
-
-Storage family
---------------
-
-  Armada SP:
-	88RC1580
-    Product infos: http://www.marvell.com/storage/armada-sp/
-    Core: Sheeva ARMv7 comatible Quad-core PJ4C
-    (not supported in upstream Linux kernel)
-
-Dove family (application processor)
------------------------------------
-
-  Flavors:
-        88AP510 a.k.a Armada 510
-                Product Brief   : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
-                Hardware Spec   : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
-                Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
-  Homepage: http://www.marvell.com/application-processors/armada-500/
-  Core: ARMv7 compatible
-
-  Directory: arch/arm/mach-mvebu (DT enabled platforms)
-             arch/arm/mach-dove (non-DT enabled platforms)
-
-PXA 2xx/3xx/93x/95x family
---------------------------
-
-  Flavors:
-        PXA21x, PXA25x, PXA26x
-             Application processor only
-             Core: ARMv5 XScale1 core
-        PXA270, PXA271, PXA272
-             Product Brief         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
-             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
-             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
-             Specification         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
-             Specification update  : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
-             Application processor only
-             Core: ARMv5 XScale2 core
-        PXA300, PXA310, PXA320
-             PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
-             PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
-             PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
-             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
-             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
-             Specifications        : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
-             Specification Update  : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
-             Reference Manual      : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
-             Application processor only
-             Core: ARMv5 XScale3 core
-        PXA930, PXA935
-             Application processor with Communication processor
-             Core: ARMv5 XScale3 core
-        PXA955
-             Application processor with Communication processor
-             Core: ARMv7 compatible Sheeva PJ4 core
-
-   Comments:
-
-    * This line of SoCs originates from the XScale family developed by
-      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
-      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
-      the later PXA95x were developed by Marvell.
-
-    * Due to their XScale origin, these SoCs have virtually nothing in
-      common with the other (Kirkwood, Dove, etc.) families of Marvell
-      SoCs, except with the MMP/MMP2 family of SoCs.
-
-   Linux kernel mach directory: arch/arm/mach-pxa
-   Linux kernel plat directory: arch/arm/plat-pxa
-
-MMP/MMP2/MMP3 family (communication processor)
------------------------------------------
-
-   Flavors:
-        PXA168, a.k.a Armada 168
-             Homepage             : http://www.marvell.com/application-processors/armada-100/armada-168.jsp
-             Product brief        : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
-             Hardware manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
-             Software manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
-             Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
-             Boot ROM manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
-             App node package     : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
-             Application processor only
-             Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
-        PXA910/PXA920
-             Homepage             : http://www.marvell.com/communication-processors/pxa910/
-             Product Brief        : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf
-             Application processor with Communication processor
-             Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
-        PXA688, a.k.a. MMP2, a.k.a Armada 610
-             Product Brief        : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
-             Application processor only
-             Core: ARMv7 compatible Sheeva PJ4 88sv581x core
-	PXA2128, a.k.a. MMP3 (OLPC XO4, Linux support not upstream)
-	     Product Brief	  : http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf
-	     Application processor only
-	     Core: Dual-core ARMv7 compatible Sheeva PJ4C core
-	PXA960/PXA968/PXA978 (Linux support not upstream)
-	     Application processor with Communication Processor
-	     Core: ARMv7 compatible Sheeva PJ4 core
-	PXA986/PXA988 (Linux support not upstream)
-	     Application processor with Communication Processor
-	     Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core
-	PXA1088/PXA1920 (Linux support not upstream)
-	     Application processor with Communication Processor
-	     Core: quad-core ARMv7 Cortex-A7
-	PXA1908/PXA1928/PXA1936
-	     Application processor with Communication Processor
-	     Core: multi-core ARMv8 Cortex-A53
-
-   Comments:
-
-    * This line of SoCs originates from the XScale family developed by
-      Intel and acquired by Marvell in ~2006. All the processors of
-      this MMP/MMP2 family were developed by Marvell.
-
-    * Due to their XScale origin, these SoCs have virtually nothing in
-      common with the other (Kirkwood, Dove, etc.) families of Marvell
-      SoCs, except with the PXA family of SoCs listed above.
-
-   Linux kernel mach directory: arch/arm/mach-mmp
-   Linux kernel plat directory: arch/arm/plat-pxa
-
-Berlin family (Multimedia Solutions)
--------------------------------------
-
-  Flavors:
-	88DE3010, Armada 1000 (no Linux support)
-		Core:		Marvell PJ1 (ARMv5TE), Dual-core
-		Product Brief:	http://www.marvell.com.cn/digital-entertainment/assets/armada_1000_pb.pdf
-	88DE3005, Armada 1500 Mini
-		Design name:	BG2CD
-		Core:		ARM Cortex-A9, PL310 L2CC
-	88DE3006, Armada 1500 Mini Plus
-		Design name:	BG2CDP
-		Core:		Dual Core ARM Cortex-A7
-	88DE3100, Armada 1500
-		Design name:	BG2
-		Core:		Marvell PJ4B-MP (ARMv7), Tauros3 L2CC
-	88DE3114, Armada 1500 Pro
-		Design name:	BG2Q
-		Core:		Quad Core ARM Cortex-A9, PL310 L2CC
-	88DE3214, Armada 1500 Pro 4K
-		Design name:	BG3
-		Core:		ARM Cortex-A15, CA15 integrated L2CC
-	88DE3218, ARMADA 1500 Ultra
-		Core:		ARM Cortex-A53
-
-  Homepage: https://www.synaptics.com/products/multimedia-solutions
-  Directory: arch/arm/mach-berlin
-
-  Comments:
-
-   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
-     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
-
-   * The Berlin family was acquired by Synaptics from Marvell in 2017.
-
-CPU Cores
----------
-
-The XScale cores were designed by Intel, and shipped by Marvell in the older
-PXA processors. Feroceon is a Marvell designed core that developed in-house,
-and that evolved into Sheeva. The XScale and Feroceon cores were phased out
-over time and replaced with Sheeva cores in later products, which subsequently
-got replaced with licensed ARM Cortex-A cores.
-
-  XScale 1
-	CPUID 0x69052xxx
-	ARMv5, iWMMXt
-  XScale 2
-	CPUID 0x69054xxx
-	ARMv5, iWMMXt
-  XScale 3
-	CPUID 0x69056xxx or 0x69056xxx
-	ARMv5, iWMMXt
-  Feroceon-1850 88fr331 "Mohawk"
-	CPUID 0x5615331x or 0x41xx926x
-	ARMv5TE, single issue
-  Feroceon-2850 88fr531-vd "Jolteon"
-	CPUID 0x5605531x or 0x41xx926x
-	ARMv5TE, VFP, dual-issue
-  Feroceon 88fr571-vd "Jolteon"
-	CPUID 0x5615571x
-	ARMv5TE, VFP, dual-issue
-  Feroceon 88fr131 "Mohawk-D"
-	CPUID 0x5625131x
-	ARMv5TE, single-issue in-order
-  Sheeva PJ1 88sv331 "Mohawk"
-	CPUID 0x561584xx
-	ARMv5, single-issue iWMMXt v2
-  Sheeva PJ4 88sv581x "Flareon"
-	CPUID 0x560f581x
-	ARMv7, idivt, optional iWMMXt v2
-  Sheeva PJ4B 88sv581x
-	CPUID 0x561f581x
-	ARMv7, idivt, optional iWMMXt v2
-  Sheeva PJ4B-MP / PJ4C
-	CPUID 0x562f584x
-	ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON
-
-Long-term plans
----------------
-
- * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
-   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
-   Business Unit) in a single mach-<foo> directory. The plat-orion/
-   would therefore disappear.
-
- * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
-   directory. The plat-pxa/ would therefore disappear.
-
-Credits
--------
-
- Maen Suleiman <maen@marvell.com>
- Lior Amsalem <alior@marvell.com>
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Andrew Lunn <andrew@lunn.ch>
- Nicolas Pitre <nico@fluxnic.net>
- Eric Miao <eric.y.miao@gmail.com>
diff --git a/Documentation/arm/Netwinder b/Documentation/arm/Netwinder
deleted file mode 100644
index f1b457fbd3de..000000000000
--- a/Documentation/arm/Netwinder
+++ /dev/null
@@ -1,78 +0,0 @@
-NetWinder specific documentation
-================================
-
-The NetWinder is a small low-power computer, primarily designed
-to run Linux.  It is based around the StrongARM RISC processor,
-DC21285 PCI bridge, with PC-type hardware glued around it.
-
-Port usage
-==========
-
-Min    - Max	Description
----------------------------
-0x0000 - 0x000f	DMA1
-0x0020 - 0x0021	PIC1
-0x0060 - 0x006f	Keyboard
-0x0070 - 0x007f	RTC
-0x0080 - 0x0087	DMA1
-0x0088 - 0x008f	DMA2
-0x00a0 - 0x00a3	PIC2
-0x00c0 - 0x00df	DMA2
-0x0180 - 0x0187	IRDA
-0x01f0 - 0x01f6	ide0
-0x0201		Game port
-0x0203		RWA010 configuration read
-0x0220 - ?	SoundBlaster
-0x0250 - ?	WaveArtist
-0x0279		RWA010 configuration index
-0x02f8 - 0x02ff	Serial ttyS1
-0x0300 - 0x031f	Ether10
-0x0338		GPIO1
-0x033a		GPIO2
-0x0370 - 0x0371	W83977F configuration registers
-0x0388 - ?	AdLib
-0x03c0 - 0x03df	VGA
-0x03f6		ide0
-0x03f8 - 0x03ff	Serial ttyS0
-0x0400 - 0x0408	DC21143
-0x0480 - 0x0487	DMA1
-0x0488 - 0x048f	DMA2
-0x0a79		RWA010 configuration write
-0xe800 - 0xe80f	ide0/ide1 BM DMA
-
-
-Interrupt usage
-===============
-
-IRQ	type	Description
----------------------------
- 0	ISA	100Hz timer
- 1	ISA	Keyboard
- 2	ISA	cascade
- 3	ISA	Serial ttyS1
- 4	ISA	Serial ttyS0
- 5	ISA	PS/2 mouse
- 6	ISA	IRDA
- 7	ISA	Printer
- 8	ISA	RTC alarm
- 9	ISA
-10	ISA	GP10 (Orange reset button)
-11	ISA
-12	ISA	WaveArtist
-13	ISA
-14	ISA	hda1
-15	ISA
-
-DMA usage
-=========
-
-DMA	type	Description
----------------------------
- 0	ISA	IRDA
- 1	ISA
- 2	ISA	cascade
- 3	ISA	WaveArtist
- 4	ISA
- 5	ISA
- 6	ISA
- 7	ISA	WaveArtist
diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird
deleted file mode 100644
index ab9193663b2b..000000000000
--- a/Documentation/arm/SA1100/FreeBird
+++ /dev/null
@@ -1,21 +0,0 @@
-Freebird-1.1 is produced by Legend(C), Inc.
-http://web.archive.org/web/*/http://www.legend.com.cn
-and software/linux maintained by Coventive(C), Inc.
-(http://www.coventive.com)
-
-Based on the Nicolas's strongarm kernel tree.
-
-===============================================================
-Maintainer:
-
-Chester Kuo <chester@coventive.com>
-	    <chester@linux.org.tw>
-
-Author :
-Tim wu <timwu@coventive.com>
-CIH <cih@coventive.com>
-Eric Peng <ericpeng@coventive.com>
-Jeff Lee <jeff_lee@coventive.com>
-Allen Cheng
-Tony Liu <tonyliu@coventive.com>
-
diff --git a/Documentation/arm/SA1100/empeg b/Documentation/arm/SA1100/empeg
deleted file mode 100644
index 4ece4849a42c..000000000000
--- a/Documentation/arm/SA1100/empeg
+++ /dev/null
@@ -1,2 +0,0 @@
-See ../empeg/README
-
diff --git a/Documentation/arm/SA1100/serial_UART b/Documentation/arm/SA1100/serial_UART
deleted file mode 100644
index a63966f1d083..000000000000
--- a/Documentation/arm/SA1100/serial_UART
+++ /dev/null
@@ -1,47 +0,0 @@
-The SA1100 serial port had its major/minor numbers officially assigned:
-
-> Date: Sun, 24 Sep 2000 21:40:27 -0700
-> From: H. Peter Anvin <hpa@transmeta.com>
-> To: Nicolas Pitre <nico@CAM.ORG>
-> Cc: Device List Maintainer <device@lanana.org>
-> Subject: Re: device
-> 
-> Okay.  Note that device numbers 204 and 205 are used for "low density
-> serial devices", so you will have a range of minors on those majors (the
-> tty device layer handles this just fine, so you don't have to worry about
-> doing anything special.)
-> 
-> So your assignments are:
-> 
-> 204 char        Low-density serial ports
->                   5 = /dev/ttySA0               SA1100 builtin serial port 0
->                   6 = /dev/ttySA1               SA1100 builtin serial port 1
->                   7 = /dev/ttySA2               SA1100 builtin serial port 2
-> 
-> 205 char        Low-density serial ports (alternate device)
->                   5 = /dev/cusa0                Callout device for ttySA0
->                   6 = /dev/cusa1                Callout device for ttySA1
->                   7 = /dev/cusa2                Callout device for ttySA2
->
-
-You must create those inodes in /dev on the root filesystem used
-by your SA1100-based device:
-
-	mknod ttySA0 c 204 5
-	mknod ttySA1 c 204 6
-	mknod ttySA2 c 204 7
-	mknod cusa0 c 205 5
-	mknod cusa1 c 205 6
-	mknod cusa2 c 205 7
-
-In addition to the creation of the appropriate device nodes above, you
-must ensure your user space applications make use of the correct device
-name. The classic example is the content of the /etc/inittab file where
-you might have a getty process started on ttyS0.  In this case:
-
-- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
-
-- don't forget to add 'ttySA0', 'console', or the appropriate tty name
-  in /etc/securetty for root to be allowed to login as well.
-
-
diff --git a/Documentation/arm/README b/Documentation/arm/arm.rst
index 9d1e5b2c92e6..2edc509df92a 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/arm.rst
@@ -1,5 +1,6 @@
-			   ARM Linux 2.6
-			   =============
+=======================
+ARM Linux 2.6 and upper
+=======================
 
     Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for
     updates.
@@ -18,22 +19,28 @@ Compilation of kernel
   line as detailed below.
 
   If you wish to cross-compile, then alter the following lines in the top
-  level make file:
+  level make file::
 
     ARCH = <whatever>
-	with
+
+  with::
+
     ARCH = arm
 
-	and
+  and::
 
     CROSS_COMPILE=
-	to
+
+  to::
+
     CROSS_COMPILE=<your-path-to-your-compiler-without-gcc>
-	eg.
+
+  eg.::
+
     CROSS_COMPILE=arm-linux-
 
-  Do a 'make config', followed by 'make Image' to build the kernel 
-  (arch/arm/boot/Image).  A compressed image can be built by doing a 
+  Do a 'make config', followed by 'make Image' to build the kernel
+  (arch/arm/boot/Image).  A compressed image can be built by doing a
   'make zImage' instead of 'make Image'.
 
 
@@ -46,7 +53,7 @@ Bug reports etc
 
   Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
   or submitted through the web form at
-  http://www.arm.linux.org.uk/developer/ 
+  http://www.arm.linux.org.uk/developer/
 
   When sending bug reports, please ensure that they contain all relevant
   information, eg. the kernel messages that were printed before/during
@@ -60,11 +67,13 @@ Include files
   which are there to reduce the clutter in the top-level directory.  These
   directories, and their purpose is listed below:
 
-   arch-*	machine/platform specific header files
-   hardware	driver-internal ARM specific data structures/definitions
-   mach		descriptions of generic ARM to specific machine interfaces
-   proc-*	processor dependent header files (currently only two
+  ============= ==========================================================
+   `arch-*`	machine/platform specific header files
+   `hardware`	driver-internal ARM specific data structures/definitions
+   `mach`	descriptions of generic ARM to specific machine interfaces
+   `proc-*`	processor dependent header files (currently only two
 		categories)
+  ============= ==========================================================
 
 
 Machine/Platform support
@@ -129,7 +138,7 @@ ST506 hard drives
   HDC base to the source.
 
   As of 31/3/96 it works with two drives (you should get the ADFS
-  *configure harddrive set to 2). I've got an internal 20MB and a great
+  `*configure` harddrive set to 2). I've got an internal 20MB and a great
   big external 5.25" FH 64MB drive (who could ever want more :-) ).
 
   I've just got 240K/s off it (a dd with bs=128k); thats about half of what
@@ -149,13 +158,13 @@ ST506 hard drives
   are welcome.
 
 
-CONFIG_MACH_ and CONFIG_ARCH_
------------------------------
+`CONFIG_MACH_` and `CONFIG_ARCH_`
+---------------------------------
   A change was made in 2003 to the macro names for new machines.
-  Historically, CONFIG_ARCH_ was used for the bonafide architecture,
+  Historically, `CONFIG_ARCH_` was used for the bonafide architecture,
   e.g. SA1100, as well as implementations of the architecture,
   e.g. Assabet.  It was decided to change the implementation macros
-  to read CONFIG_MACH_ for clarity.  Moreover, a retroactive fixup has
+  to read `CONFIG_MACH_` for clarity.  Moreover, a retroactive fixup has
   not been made because it would complicate patching.
 
   Previous registrations may be found online.
@@ -163,7 +172,7 @@ CONFIG_MACH_ and CONFIG_ARCH_
     <http://www.arm.linux.org.uk/developer/machines/>
 
 Kernel entry (head.S)
---------------------------
+---------------------
   The initial entry into the kernel is via head.S, which uses machine
   independent code.  The machine is selected by the value of 'r1' on
   entry, which must be kept unique.
@@ -201,4 +210,5 @@ Kernel entry (head.S)
   platform is DT-only, you do not need a registered machine type.
 
 ---
+
 Russell King (15/03/2004)
diff --git a/Documentation/arm/Booting b/Documentation/arm/booting.rst
index f1f965ce93d6..4babb6c6ae1e 100644
--- a/Documentation/arm/Booting
+++ b/Documentation/arm/booting.rst
@@ -1,7 +1,9 @@
-			Booting ARM Linux
-			=================
+=================
+Booting ARM Linux
+=================
 
 Author:	Russell King
+
 Date  : 18 May 2002
 
 The following documentation is relevant to 2.4.18-rmk6 and beyond.
@@ -25,8 +27,10 @@ following:
 1. Setup and initialise RAM
 ---------------------------
 
-Existing boot loaders:		MANDATORY
-New boot loaders:		MANDATORY
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
 
 The boot loader is expected to find and initialise all RAM that the
 kernel will use for volatile data storage in the system.  It performs
@@ -39,8 +43,10 @@ sees fit.)
 2. Initialise one serial port
 -----------------------------
 
-Existing boot loaders:		OPTIONAL, RECOMMENDED
-New boot loaders:		OPTIONAL, RECOMMENDED
+Existing boot loaders:
+	OPTIONAL, RECOMMENDED
+New boot loaders:
+	OPTIONAL, RECOMMENDED
 
 The boot loader should initialise and enable one serial port on the
 target.  This allows the kernel serial driver to automatically detect
@@ -57,8 +63,10 @@ serial format options as described in
 3. Detect the machine type
 --------------------------
 
-Existing boot loaders:		OPTIONAL
-New boot loaders:		MANDATORY except for DT-only platforms
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	MANDATORY except for DT-only platforms
 
 The boot loader should detect the machine type its running on by some
 method.  Whether this is a hard coded value or some algorithm that
@@ -74,8 +82,10 @@ necessary, but assures that it will not match any existing types.
 4. Setup boot data
 ------------------
 
-Existing boot loaders:		OPTIONAL, HIGHLY RECOMMENDED
-New boot loaders:		MANDATORY
+Existing boot loaders:
+	OPTIONAL, HIGHLY RECOMMENDED
+New boot loaders:
+	MANDATORY
 
 The boot loader must provide either a tagged list or a dtb image for
 passing configuration data to the kernel.  The physical address of the
@@ -97,15 +107,15 @@ entirety; some tags behave as the former, others the latter.
 
 The boot loader must pass at a minimum the size and location of
 the system memory, and root filesystem location.  Therefore, the
-minimum tagged list should look:
+minimum tagged list should look::
 
-	+-----------+
-base ->	| ATAG_CORE |  |
-	+-----------+  |
-	| ATAG_MEM  |  | increasing address
-	+-----------+  |
-	| ATAG_NONE |  |
-	+-----------+  v
+		+-----------+
+  base ->	| ATAG_CORE |  |
+		+-----------+  |
+		| ATAG_MEM  |  | increasing address
+		+-----------+  |
+		| ATAG_NONE |  |
+		+-----------+  v
 
 The tagged list should be stored in system RAM.
 
@@ -134,8 +144,10 @@ A safe location is just above the 128MiB boundary from start of RAM.
 5. Load initramfs.
 ------------------
 
-Existing boot loaders:		OPTIONAL
-New boot loaders:		OPTIONAL
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	OPTIONAL
 
 If an initramfs is in use then, as with the dtb, it must be placed in
 a region of memory where the kernel decompressor will not overwrite it
@@ -149,8 +161,10 @@ recommended above.
 6. Calling the kernel image
 ---------------------------
 
-Existing boot loaders:		MANDATORY
-New boot loaders:		MANDATORY
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
 
 There are two options for calling the kernel zImage.  If the zImage
 is stored in flash, and is linked correctly to be run from flash,
@@ -174,12 +188,14 @@ In any case, the following conditions must be met:
   you many hours of debug.
 
 - CPU register settings
-  r0 = 0,
-  r1 = machine type number discovered in (3) above.
-  r2 = physical address of tagged list in system RAM, or
-       physical address of device tree block (dtb) in system RAM
+
+  - r0 = 0,
+  - r1 = machine type number discovered in (3) above.
+  - r2 = physical address of tagged list in system RAM, or
+    physical address of device tree block (dtb) in system RAM
 
 - CPU mode
+
   All forms of interrupts must be disabled (IRQs and FIQs)
 
   For CPUs which do not include the ARM virtualization extensions, the
@@ -195,8 +211,11 @@ In any case, the following conditions must be met:
   entered in SVC mode.
 
 - Caches, MMUs
+
   The MMU must be off.
+
   Instruction cache may be on or off.
+
   Data cache must be off.
 
   If the kernel is entered in HYP mode, the above requirements apply to
diff --git a/Documentation/arm/cluster-pm-race-avoidance.txt b/Documentation/arm/cluster-pm-race-avoidance.rst
index 750b6fc24af9..aa58603d3f28 100644
--- a/Documentation/arm/cluster-pm-race-avoidance.txt
+++ b/Documentation/arm/cluster-pm-race-avoidance.rst
@@ -1,3 +1,4 @@
+=========================================================
 Cluster-wide Power-up/power-down race avoidance algorithm
 =========================================================
 
@@ -46,10 +47,12 @@ Basic model
 
 Each cluster and CPU is assigned a state, as follows:
 
-	DOWN
-	COMING_UP
-	UP
-	GOING_DOWN
+	- DOWN
+	- COMING_UP
+	- UP
+	- GOING_DOWN
+
+::
 
 	    +---------> UP ----------+
 	    |                        v
@@ -60,18 +63,22 @@ Each cluster and CPU is assigned a state, as follows:
 	    +--------- DOWN <--------+
 
 
-DOWN:	The CPU or cluster is not coherent, and is either powered off or
+DOWN:
+	The CPU or cluster is not coherent, and is either powered off or
 	suspended, or is ready to be powered off or suspended.
 
-COMING_UP: The CPU or cluster has committed to moving to the UP state.
+COMING_UP:
+	The CPU or cluster has committed to moving to the UP state.
 	It may be part way through the process of initialisation and
 	enabling coherency.
 
-UP:	The CPU or cluster is active and coherent at the hardware
+UP:
+	The CPU or cluster is active and coherent at the hardware
 	level.  A CPU in this state is not necessarily being used
 	actively by the kernel.
 
-GOING_DOWN: The CPU or cluster has committed to moving to the DOWN
+GOING_DOWN:
+	The CPU or cluster has committed to moving to the DOWN
 	state.  It may be part way through the process of teardown and
 	coherency exit.
 
@@ -86,8 +93,8 @@ CPUs in the cluster simultaneously modifying the state.  The cluster-
 level states are described in the "Cluster state" section.
 
 To help distinguish the CPU states from cluster states in this
-discussion, the state names are given a CPU_ prefix for the CPU states,
-and a CLUSTER_ or INBOUND_ prefix for the cluster states.
+discussion, the state names are given a `CPU_` prefix for the CPU states,
+and a `CLUSTER_` or `INBOUND_` prefix for the cluster states.
 
 
 CPU state
@@ -101,10 +108,12 @@ This means that CPUs fit the basic model closely.
 
 The algorithm defines the following states for each CPU in the system:
 
-	CPU_DOWN
-	CPU_COMING_UP
-	CPU_UP
-	CPU_GOING_DOWN
+	- CPU_DOWN
+	- CPU_COMING_UP
+	- CPU_UP
+	- CPU_GOING_DOWN
+
+::
 
 	 cluster setup and
 	CPU setup complete          policy decision
@@ -130,17 +139,17 @@ requirement for any external event to happen.
 
 
 CPU_DOWN:
-
 	A CPU reaches the CPU_DOWN state when it is ready for
 	power-down.  On reaching this state, the CPU will typically
 	power itself down or suspend itself, via a WFI instruction or a
 	firmware call.
 
-	Next state:	CPU_COMING_UP
-	Conditions:	none
+	Next state:
+		CPU_COMING_UP
+	Conditions:
+		none
 
 	Trigger events:
-
 		a) an explicit hardware power-up operation, resulting
 		   from a policy decision on another CPU;
 
@@ -148,15 +157,17 @@ CPU_DOWN:
 
 
 CPU_COMING_UP:
-
 	A CPU cannot start participating in hardware coherency until the
 	cluster is set up and coherent.  If the cluster is not ready,
 	then the CPU will wait in the CPU_COMING_UP state until the
 	cluster has been set up.
 
-	Next state:	CPU_UP
-	Conditions:	The CPU's parent cluster must be in CLUSTER_UP.
-	Trigger events:	Transition of the parent cluster to CLUSTER_UP.
+	Next state:
+		CPU_UP
+	Conditions:
+		The CPU's parent cluster must be in CLUSTER_UP.
+	Trigger events:
+		Transition of the parent cluster to CLUSTER_UP.
 
 	Refer to the "Cluster state" section for a description of the
 	CLUSTER_UP state.
@@ -178,20 +189,25 @@ CPU_UP:
 	The CPU remains in this state until an explicit policy decision
 	is made to shut down or suspend the CPU.
 
-	Next state:	CPU_GOING_DOWN
-	Conditions:	none
-	Trigger events:	explicit policy decision
+	Next state:
+		CPU_GOING_DOWN
+	Conditions:
+		none
+	Trigger events:
+		explicit policy decision
 
 
 CPU_GOING_DOWN:
-
 	While in this state, the CPU exits coherency, including any
 	operations required to achieve this (such as cleaning data
 	caches).
 
-	Next state:	CPU_DOWN
-	Conditions:	local CPU teardown complete
-	Trigger events:	(spontaneous)
+	Next state:
+		CPU_DOWN
+	Conditions:
+		local CPU teardown complete
+	Trigger events:
+		(spontaneous)
 
 
 Cluster state
@@ -212,20 +228,20 @@ independently of the CPU which is tearing down the cluster.  For this
 reason, the cluster state is split into two parts:
 
 	"cluster" state: The global state of the cluster; or the state
-		on the outbound side:
+	on the outbound side:
 
-		CLUSTER_DOWN
-		CLUSTER_UP
-		CLUSTER_GOING_DOWN
+		- CLUSTER_DOWN
+		- CLUSTER_UP
+		- CLUSTER_GOING_DOWN
 
 	"inbound" state: The state of the cluster on the inbound side.
 
-		INBOUND_NOT_COMING_UP
-		INBOUND_COMING_UP
+		- INBOUND_NOT_COMING_UP
+		- INBOUND_COMING_UP
 
 
 	The different pairings of these states results in six possible
-	states for the cluster as a whole:
+	states for the cluster as a whole::
 
 	                            CLUSTER_UP
 	          +==========> INBOUND_NOT_COMING_UP -------------+
@@ -284,11 +300,12 @@ reason, the cluster state is split into two parts:
 
 
 CLUSTER_DOWN/INBOUND_NOT_COMING_UP:
+	Next state:
+		CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
+	Conditions:
+		none
 
-	Next state:	CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
-	Conditions:	none
 	Trigger events:
-
 		a) an explicit hardware power-up operation, resulting
 		   from a policy decision on another CPU;
 
@@ -306,9 +323,12 @@ CLUSTER_DOWN/INBOUND_COMING_UP:
 	setup to enable other CPUs in the cluster to enter coherency
 	safely.
 
-	Next state:	CLUSTER_UP/INBOUND_COMING_UP (inbound)
-	Conditions:	cluster-level setup and hardware coherency complete
-	Trigger events:	(spontaneous)
+	Next state:
+		CLUSTER_UP/INBOUND_COMING_UP (inbound)
+	Conditions:
+		cluster-level setup and hardware coherency complete
+	Trigger events:
+		(spontaneous)
 
 
 CLUSTER_UP/INBOUND_COMING_UP:
@@ -321,9 +341,12 @@ CLUSTER_UP/INBOUND_COMING_UP:
 	CLUSTER_UP/INBOUND_NOT_COMING_UP.  All other CPUs on the cluster
 	should consider treat these two states as equivalent.
 
-	Next state:	CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
-	Conditions:	none
-	Trigger events:	(spontaneous)
+	Next state:
+		CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
+	Conditions:
+		none
+	Trigger events:
+		(spontaneous)
 
 
 CLUSTER_UP/INBOUND_NOT_COMING_UP:
@@ -335,9 +358,12 @@ CLUSTER_UP/INBOUND_NOT_COMING_UP:
 	The cluster will remain in this state until a policy decision is
 	made to power the cluster down.
 
-	Next state:	CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
-	Conditions:	none
-	Trigger events:	policy decision to power down the cluster
+	Next state:
+		CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
+	Conditions:
+		none
+	Trigger events:
+		policy decision to power down the cluster
 
 
 CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
@@ -359,13 +385,16 @@ CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
 	Next states:
 
 	CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound)
-		Conditions:	cluster torn down and ready to power off
-		Trigger events:	(spontaneous)
+		Conditions:
+			cluster torn down and ready to power off
+		Trigger events:
+			(spontaneous)
 
 	CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound)
-		Conditions:	none
-		Trigger events:
+		Conditions:
+			none
 
+		Trigger events:
 			a) an explicit hardware power-up operation,
 			   resulting from a policy decision on another
 			   CPU;
@@ -396,13 +425,19 @@ CLUSTER_GOING_DOWN/INBOUND_COMING_UP:
 	Next states:
 
 	CLUSTER_UP/INBOUND_COMING_UP (outbound)
-		Conditions:	cluster-level setup and hardware
+		Conditions:
+				cluster-level setup and hardware
 				coherency complete
-		Trigger events:	(spontaneous)
+
+		Trigger events:
+				(spontaneous)
 
 	CLUSTER_DOWN/INBOUND_COMING_UP (outbound)
-		Conditions:	cluster torn down and ready to power off
-		Trigger events:	(spontaneous)
+		Conditions:
+			cluster torn down and ready to power off
+
+		Trigger events:
+			(spontaneous)
 
 
 Last man and First man selection
@@ -452,30 +487,30 @@ Implementation:
 	arch/arm/common/mcpm_entry.c (everything else):
 
 	__mcpm_cpu_going_down() signals the transition of a CPU to the
-		CPU_GOING_DOWN state.
+	CPU_GOING_DOWN state.
 
 	__mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN
-		state.
+	state.
 
 	A CPU transitions to CPU_COMING_UP and then to CPU_UP via the
-		low-level power-up code in mcpm_head.S.  This could
-		involve CPU-specific setup code, but in the current
-		implementation it does not.
+	low-level power-up code in mcpm_head.S.  This could
+	involve CPU-specific setup code, but in the current
+	implementation it does not.
 
 	__mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical()
-		handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
-		and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
-		the case of an aborted cluster power-down).
+	handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
+	and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
+	the case of an aborted cluster power-down).
 
-		These functions are more complex than the __mcpm_cpu_*()
-		functions due to the extra inter-CPU coordination which
-		is needed for safe transitions at the cluster level.
+	These functions are more complex than the __mcpm_cpu_*()
+	functions due to the extra inter-CPU coordination which
+	is needed for safe transitions at the cluster level.
 
 	A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via
-		the low-level power-up code in mcpm_head.S.  This
-		typically involves platform-specific setup code,
-		provided by the platform-specific power_up_setup
-		function registered via mcpm_sync_init.
+	the low-level power-up code in mcpm_head.S.  This
+	typically involves platform-specific setup code,
+	provided by the platform-specific power_up_setup
+	function registered via mcpm_sync_init.
 
 Deep topologies:
 
diff --git a/Documentation/arm/firmware.txt b/Documentation/arm/firmware.rst
index 7f175dbb427e..efd844baec1d 100644
--- a/Documentation/arm/firmware.txt
+++ b/Documentation/arm/firmware.rst
@@ -1,5 +1,7 @@
-Interface for registering and calling firmware-specific operations for ARM.
-----
+==========================================================================
+Interface for registering and calling firmware-specific operations for ARM
+==========================================================================
+
 Written by Tomasz Figa <t.figa@samsung.com>
 
 Some boards are running with secure firmware running in TrustZone secure
@@ -9,7 +11,7 @@ operations and call them when needed.
 
 Firmware operations can be specified by filling in a struct firmware_ops
 with appropriate callbacks and then registering it with register_firmware_ops()
-function.
+function::
 
 	void register_firmware_ops(const struct firmware_ops *ops)
 
@@ -19,7 +21,7 @@ and its members can be found in arch/arm/include/asm/firmware.h header.
 There is a default, empty set of operations provided, so there is no need to
 set anything if platform does not require firmware operations.
 
-To call a firmware operation, a helper macro is provided
+To call a firmware operation, a helper macro is provided::
 
 	#define call_firmware_op(op, ...)				\
 		((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
@@ -28,7 +30,7 @@ the macro checks if the operation is provided and calls it or otherwise returns
 -ENOSYS to signal that given operation is not available (for example, to allow
 fallback to legacy operation).
 
-Example of registering firmware operations:
+Example of registering firmware operations::
 
 	/* board file */
 
@@ -56,7 +58,7 @@ Example of registering firmware operations:
 		register_firmware_ops(&platformX_firmware_ops);
 	}
 
-Example of using a firmware operation:
+Example of using a firmware operation::
 
 	/* some platform code, e.g. SMP initialization */
 
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
new file mode 100644
index 000000000000..5fc072dd0c5e
--- /dev/null
+++ b/Documentation/arm/index.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+ARM Architecture
+================
+
+.. toctree::
+   :maxdepth: 1
+
+   arm
+   booting
+   cluster-pm-race-avoidance
+   firmware
+   interrupts
+   kernel_mode_neon
+   kernel_user_helpers
+   memory
+   mem_alignment
+   tcm
+   setup
+   swp_emulation
+   uefi
+   vlocks
+   porting
+
+SoC-specific documents
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   ixp4xx
+
+   marvel
+   microchip
+
+   netwinder
+   nwfpe/index
+
+   keystone/overview
+   keystone/knav-qmss
+
+   omap/index
+
+   pxa/mfp
+
+
+   sa1100/index
+
+   stm32/stm32f746-overview
+   stm32/overview
+   stm32/stm32h743-overview
+   stm32/stm32f769-overview
+   stm32/stm32f429-overview
+   stm32/stm32mp157-overview
+
+   sunxi
+
+   samsung/index
+   samsung-s3c24xx/index
+
+   sunxi/clocks
+
+   spear/overview
+
+   sti/stih416-overview
+   sti/stih407-overview
+   sti/stih418-overview
+   sti/overview
+   sti/stih415-overview
+
+   vfp/release-notes
+
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/interrupts.rst
index f09ab1b90ef1..2ae70e0e9732 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/interrupts.rst
@@ -1,8 +1,10 @@
-2.5.2-rmk5
-----------
+==========
+Interrupts
+==========
 
-This is the first kernel that contains a major shake up of some of the
-major architecture-specific subsystems.
+2.5.2-rmk5:
+  This is the first kernel that contains a major shake up of some of the
+  major architecture-specific subsystems.
 
 Firstly, it contains some pretty major changes to the way we handle the
 MMU TLB.  Each MMU TLB variant is now handled completely separately -
@@ -18,7 +20,7 @@ Unfortunately, this means that machine types that touch the irq_desc[]
 array (basically all machine types) will break, and this means every
 machine type that we currently have.
 
-Lets take an example.  On the Assabet with Neponset, we have:
+Lets take an example.  On the Assabet with Neponset, we have::
 
                   GPIO25                 IRR:2
         SA1100 ------------> Neponset -----------> SA1111
@@ -48,42 +50,47 @@ the irqdesc array).  This doesn't have to be a real "IC"; indeed the
 SA11x0 IRQs are handled by two separate "chip" structures, one for
 GPIO0-10, and another for all the rest.  It is just a container for
 the various operations (maybe this'll change to a better name).
-This structure has the following operations:
-
-struct irqchip {
-        /*
-         * Acknowledge the IRQ.
-         * If this is a level-based IRQ, then it is expected to mask the IRQ
-         * as well.
-         */
-        void (*ack)(unsigned int irq);
-        /*
-         * Mask the IRQ in hardware.
-         */
-        void (*mask)(unsigned int irq);
-        /*
-         * Unmask the IRQ in hardware.
-         */
-        void (*unmask)(unsigned int irq);
-        /*
-         * Re-run the IRQ
-         */
-        void (*rerun)(unsigned int irq);
-        /*
-         * Set the type of the IRQ.
-         */
-        int (*type)(unsigned int irq, unsigned int, type);
-};
-
-ack    - required.  May be the same function as mask for IRQs
+This structure has the following operations::
+
+  struct irqchip {
+          /*
+           * Acknowledge the IRQ.
+           * If this is a level-based IRQ, then it is expected to mask the IRQ
+           * as well.
+           */
+          void (*ack)(unsigned int irq);
+          /*
+           * Mask the IRQ in hardware.
+           */
+          void (*mask)(unsigned int irq);
+          /*
+           * Unmask the IRQ in hardware.
+           */
+          void (*unmask)(unsigned int irq);
+          /*
+           * Re-run the IRQ
+           */
+          void (*rerun)(unsigned int irq);
+          /*
+           * Set the type of the IRQ.
+           */
+          int (*type)(unsigned int irq, unsigned int, type);
+  };
+
+ack
+       - required.  May be the same function as mask for IRQs
          handled by do_level_IRQ.
-mask   - required.
-unmask - required.
-rerun  - optional.  Not required if you're using do_level_IRQ for all
+mask
+       - required.
+unmask
+       - required.
+rerun
+       - optional.  Not required if you're using do_level_IRQ for all
          IRQs that use this 'irqchip'.  Generally expected to re-trigger
          the hardware IRQ if possible.  If not, may call the handler
 	 directly.
-type   - optional.  If you don't support changing the type of an IRQ,
+type
+       - optional.  If you don't support changing the type of an IRQ,
          it should be null so people can detect if they are unable to
          set the IRQ type.
 
@@ -109,6 +116,7 @@ manipulation, nor state tracking.  This is useful for things like the
 SMC9196 and USAR above.
 
 So, what's changed?
+===================
 
 1. Machine implementations must not write to the irqdesc array.
 
@@ -118,24 +126,19 @@ So, what's changed?
    absolutely necessary.
 
         set_irq_chip(irq,chip)
-
                 Set the mask/unmask methods for handling this IRQ
 
         set_irq_handler(irq,handler)
-
                 Set the handler for this IRQ (level, edge, simple)
 
         set_irq_chained_handler(irq,handler)
-
                 Set a "chained" handler for this IRQ - automatically
                 enables this IRQ (eg, Neponset and SA1111 handlers).
 
         set_irq_flags(irq,flags)
-
                 Set the valid/probe/noautoenable flags.
 
         set_irq_type(irq,type)
-
                 Set active the IRQ edge(s)/level.  This replaces the
                 SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
                 function.  Type should be one of IRQ_TYPE_xxx defined in
@@ -158,10 +161,9 @@ So, what's changed?
    be re-checked for pending events.  (see the Neponset IRQ handler for
    details).
 
-7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h
+7. fixup_irq() is gone, as is `arch/arm/mach-*/include/mach/irq.h`
 
 Please note that this will not solve all problems - some of them are
 hardware based.  Mixing level-based and edge-based IRQs on the same
 parent signal (eg neponset) is one such area where a software based
 solution can't provide the full answer to low IRQ latency.
-
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/ixp4xx.rst
index e48b74de6ac0..a57235616294 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/ixp4xx.rst
@@ -1,6 +1,6 @@
-
--------------------------------------------------------------------------
+===========================================================
 Release Notes for Linux on Intel's IXP4xx Network Processor
+===========================================================
 
 Maintained by Deepak Saxena <dsaxena@plexity.net>
 -------------------------------------------------------------------------
@@ -8,7 +8,7 @@ Maintained by Deepak Saxena <dsaxena@plexity.net>
 1. Overview
 
 Intel's IXP4xx network processor is a highly integrated SOC that
-is targeted for network applications, though it has become popular 
+is targeted for network applications, though it has become popular
 in industrial control and other areas due to low cost and power
 consumption. The IXP4xx family currently consists of several processors
 that support different network offload functions such as encryption,
@@ -20,7 +20,7 @@ For more information on the various versions of the CPU, see:
 
    http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm
 
-Intel also made the IXCP1100 CPU for sometime which is an IXP4xx 
+Intel also made the IXCP1100 CPU for sometime which is an IXP4xx
 stripped of much of the network intelligence.
 
 2. Linux Support
@@ -31,7 +31,7 @@ Linux currently supports the following features on the IXP4xx chips:
 - PCI interface
 - Flash access (MTD/JFFS)
 - I2C through GPIO on IXP42x
-- GPIO for input/output/interrupts 
+- GPIO for input/output/interrupts
   See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
 - Timers (watchdog, OS)
 
@@ -45,7 +45,7 @@ require the use of Intel's proprietary CSR software:
 If you need to use any of the above, you need to download Intel's
 software from:
 
-   http://developer.intel.com/design/network/products/npfamily/ixp425.htm    
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm
 
 DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
 SOFTWARE.
@@ -53,14 +53,14 @@ SOFTWARE.
 There are several websites that provide directions/pointers on using
 Intel's software:
 
-   http://sourceforge.net/projects/ixp4xx-osdg/
-   Open Source Developer's Guide for using uClinux and the Intel libraries 
+   - http://sourceforge.net/projects/ixp4xx-osdg/
+     Open Source Developer's Guide for using uClinux and the Intel libraries
 
-http://gatewaymaker.sourceforge.net/ 
-   Simple one page summary of building a gateway using an IXP425 and Linux
+   - http://gatewaymaker.sourceforge.net/
+     Simple one page summary of building a gateway using an IXP425 and Linux
 
-http://ixp425.sourceforge.net/
-   ATM device driver for IXP425 that relies on Intel's libraries
+   - http://ixp425.sourceforge.net/
+     ATM device driver for IXP425 that relies on Intel's libraries
 
 3. Known Issues/Limitations
 
@@ -70,7 +70,7 @@ The IXP4xx family allows for up to 256MB of memory but the PCI interface
 can only expose 64MB of that memory to the PCI bus. This means that if
 you are running with > 64MB, all PCI buffers outside of the accessible
 range will be bounced using the routines in arch/arm/common/dmabounce.c.
-   
+
 3b. Limited outbound PCI window
 
 IXP4xx provides two methods of accessing PCI memory space:
@@ -79,15 +79,15 @@ IXP4xx provides two methods of accessing PCI memory space:
    To access PCI via this space, we simply ioremap() the BAR
    into the kernel and we can use the standard read[bwl]/write[bwl]
    macros. This is the preffered method due to speed but it
-   limits the system to just 64MB of PCI memory. This can be 
+   limits the system to just 64MB of PCI memory. This can be
    problamatic if using video cards and other memory-heavy devices.
-          
-2) If > 64MB of memory space is required, the IXP4xx can be 
-   configured to use indirect registers to access PCI This allows 
-   for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-   The disadvantage of this is that every PCI access requires 
-   three local register accesses plus a spinlock, but in some 
-   cases the performance hit is acceptable. In addition, you cannot 
+
+2) If > 64MB of memory space is required, the IXP4xx can be
+   configured to use indirect registers to access PCI This allows
+   for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
+   The disadvantage of this is that every PCI access requires
+   three local register accesses plus a spinlock, but in some
+   cases the performance hit is acceptable. In addition, you cannot
    mmap() PCI devices in this case due to the indirect nature
    of the PCI window.
 
@@ -96,14 +96,14 @@ you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option.
 
 3c. GPIO as Interrupts
 
-Currently the code only handles level-sensitive GPIO interrupts 
+Currently the code only handles level-sensitive GPIO interrupts
 
 4. Supported platforms
 
 ADI Engineering Coyote Gateway Reference Platform
 http://www.adiengineering.com/productsCoyote.html
 
-   The ADI Coyote platform is reference design for those building 
+   The ADI Coyote platform is reference design for those building
    small residential/office gateways. One NPE is connected to a 10/100
    interface, one to 4-port 10/100 switch, and the third to and ADSL
    interface. In addition, it also supports to POTs interfaces connected
@@ -119,9 +119,9 @@ http://www.gateworks.com/support/overview.php
    the expansion bus.
 
 Intel IXDP425 Development Platform
-http://www.intel.com/design/network/products/npfamily/ixdpg425.htm  
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
 
-   This is Intel's standard reference platform for the IXDP425 and is 
+   This is Intel's standard reference platform for the IXDP425 and is
    also known as the Richfield board. It contains 4 PCI slots, 16MB
    of flash, two 10/100 ports and one ADSL port.
 
@@ -161,11 +161,12 @@ The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc.
 
 The following people have contributed patches/comments/etc:
 
-Lennerty Buytenhek
-Lutz Jaenicke
-Justin Mayfield
-Robert E. Ranslam
-[I know I've forgotten others, please email me to be added] 
+- Lennerty Buytenhek
+- Lutz Jaenicke
+- Justin Mayfield
+- Robert E. Ranslam
+
+[I know I've forgotten others, please email me to be added]
 
 -------------------------------------------------------------------------
 
diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.rst
index b9e060c5b61e..9bfb71a2a9b9 100644
--- a/Documentation/arm/kernel_mode_neon.txt
+++ b/Documentation/arm/kernel_mode_neon.rst
@@ -1,3 +1,4 @@
+================
 Kernel mode NEON
 ================
 
@@ -86,6 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
 
 Therefore, the recommended and only supported way of using NEON/VFP in the
 kernel is by adhering to the following rules:
+
 * isolate the NEON code in a separate compilation unit and compile it with
   '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
 * issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
@@ -115,6 +117,7 @@ NEON intrinsics
 NEON intrinsics are also supported. However, as code using NEON intrinsics
 relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should
 observe the following in addition to the rules above:
+
 * Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC
   uses its builtin version of <stdint.h> (this is a C99 header which the kernel
   does not supply);
diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.rst
index 5673594717cf..eb6f3d916622 100644
--- a/Documentation/arm/kernel_user_helpers.txt
+++ b/Documentation/arm/kernel_user_helpers.rst
@@ -1,3 +1,4 @@
+============================
 Kernel-provided User Helpers
 ============================
 
@@ -43,7 +44,7 @@ kuser_helper_version
 
 Location:	0xffff0ffc
 
-Reference declaration:
+Reference declaration::
 
   extern int32_t __kuser_helper_version;
 
@@ -53,17 +54,17 @@ Definition:
   running kernel.  User space may read this to determine the availability
   of a particular helper.
 
-Usage example:
+Usage example::
 
-#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+  #define __kuser_helper_version (*(int32_t *)0xffff0ffc)
 
-void check_kuser_version(void)
-{
+  void check_kuser_version(void)
+  {
 	if (__kuser_helper_version < 2) {
 		fprintf(stderr, "can't do atomic operations, kernel too old\n");
 		abort();
 	}
-}
+  }
 
 Notes:
 
@@ -77,7 +78,7 @@ kuser_get_tls
 
 Location:	0xffff0fe0
 
-Reference prototype:
+Reference prototype::
 
   void * __kuser_get_tls(void);
 
@@ -97,16 +98,16 @@ Definition:
 
   Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
 
-Usage example:
+Usage example::
 
-typedef void * (__kuser_get_tls_t)(void);
-#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+  typedef void * (__kuser_get_tls_t)(void);
+  #define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
 
-void foo()
-{
+  void foo()
+  {
 	void *tls = __kuser_get_tls();
 	printf("TLS = %p\n", tls);
-}
+  }
 
 Notes:
 
@@ -117,7 +118,7 @@ kuser_cmpxchg
 
 Location:	0xffff0fc0
 
-Reference prototype:
+Reference prototype::
 
   int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
 
@@ -139,18 +140,18 @@ Clobbered registers:
 
 Definition:
 
-  Atomically store newval in *ptr only if *ptr is equal to oldval.
-  Return zero if *ptr was changed or non-zero if no exchange happened.
-  The C flag is also set if *ptr was changed to allow for assembly
+  Atomically store newval in `*ptr` only if `*ptr` is equal to oldval.
+  Return zero if `*ptr` was changed or non-zero if no exchange happened.
+  The C flag is also set if `*ptr` was changed to allow for assembly
   optimization in the calling code.
 
-Usage example:
+Usage example::
 
-typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
-#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+  typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+  #define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
 
-int atomic_add(volatile int *ptr, int val)
-{
+  int atomic_add(volatile int *ptr, int val)
+  {
 	int old, new;
 
 	do {
@@ -159,7 +160,7 @@ int atomic_add(volatile int *ptr, int val)
 	} while(__kuser_cmpxchg(old, new, ptr));
 
 	return new;
-}
+  }
 
 Notes:
 
@@ -172,7 +173,7 @@ kuser_memory_barrier
 
 Location:	0xffff0fa0
 
-Reference prototype:
+Reference prototype::
 
   void __kuser_memory_barrier(void);
 
@@ -193,10 +194,10 @@ Definition:
   Apply any needed memory barrier to preserve consistency with data modified
   manually and __kuser_cmpxchg usage.
 
-Usage example:
+Usage example::
 
-typedef void (__kuser_dmb_t)(void);
-#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+  typedef void (__kuser_dmb_t)(void);
+  #define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
 
 Notes:
 
@@ -207,7 +208,7 @@ kuser_cmpxchg64
 
 Location:	0xffff0f60
 
-Reference prototype:
+Reference prototype::
 
   int __kuser_cmpxchg64(const int64_t *oldval,
                         const int64_t *newval,
@@ -231,22 +232,22 @@ Clobbered registers:
 
 Definition:
 
-  Atomically store the 64-bit value pointed by *newval in *ptr only if *ptr
-  is equal to the 64-bit value pointed by *oldval.  Return zero if *ptr was
+  Atomically store the 64-bit value pointed by `*newval` in `*ptr` only if `*ptr`
+  is equal to the 64-bit value pointed by `*oldval`.  Return zero if `*ptr` was
   changed or non-zero if no exchange happened.
 
-  The C flag is also set if *ptr was changed to allow for assembly
+  The C flag is also set if `*ptr` was changed to allow for assembly
   optimization in the calling code.
 
-Usage example:
+Usage example::
 
-typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
-                                  const int64_t *newval,
-                                  volatile int64_t *ptr);
-#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+  typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+                                    const int64_t *newval,
+                                    volatile int64_t *ptr);
+  #define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
 
-int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
-{
+  int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+  {
 	int64_t old, new;
 
 	do {
@@ -255,7 +256,7 @@ int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
 	} while(__kuser_cmpxchg64(&old, &new, ptr));
 
 	return new;
-}
+  }
 
 Notes:
 
diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.rst
index fcdb9fd5f53a..7f7638d80b42 100644
--- a/Documentation/arm/keystone/knav-qmss.txt
+++ b/Documentation/arm/keystone/knav-qmss.rst
@@ -1,4 +1,6 @@
-* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+======================================================================
+Texas Instruments Keystone Navigator Queue Management SubSystem driver
+======================================================================
 
 Driver source code path
   drivers/soc/ti/knav_qmss.c
@@ -34,11 +36,13 @@ driver that interface with the accumulator PDSP. This configures
 accumulator channels defined in DTS (example in DT documentation) to monitor
 1 or 32 queues per channel. More description on the firmware is available in
 CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
+
 	git://git.ti.com/keystone-rtos/qmss-lld.git
 
 k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
 channels. This firmware is available under ti-keystone folder of
 firmware.git at
+
    git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
 
 To use copy the firmware image to lib/firmware folder of the initramfs or
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/overview.rst
index 400c0c270d2e..cd90298c493c 100644
--- a/Documentation/arm/keystone/Overview.txt
+++ b/Documentation/arm/keystone/overview.rst
@@ -1,5 +1,6 @@
-		TI Keystone Linux Overview
-		--------------------------
+==========================
+TI Keystone Linux Overview
+==========================
 
 Introduction
 ------------
@@ -9,47 +10,65 @@ for users to run Linux on Keystone based EVMs from Texas Instruments.
 
 Following SoCs  & EVMs are currently supported:-
 
------------- K2HK SoC and EVM --------------------------------------------------
+K2HK SoC and EVM
+=================
 
 a.k.a Keystone 2 Hawking/Kepler SoC
 TCI6636K2H & TCI6636K2K: See documentation at
+
 	http://www.ti.com/product/tci6638k2k
 	http://www.ti.com/product/tci6638k2h
 
 EVM:
-http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+  http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
 
------------- K2E SoC and EVM ---------------------------------------------------
+K2E SoC and EVM
+===============
 
 a.k.a Keystone 2 Edison SoC
-K2E  -  66AK2E05: See documentation at
+
+K2E  -  66AK2E05:
+
+See documentation at
+
 	http://www.ti.com/product/66AK2E05/technicaldocuments
 
 EVM:
-https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+   https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
 
------------- K2L SoC and EVM ---------------------------------------------------
+K2L SoC and EVM
+===============
 
 a.k.a Keystone 2 Lamarr SoC
-K2L  -  TCI6630K2L: See documentation at
+
+K2L  -  TCI6630K2L:
+
+See documentation at
 	http://www.ti.com/product/TCI6630K2L/technicaldocuments
+
 EVM:
-https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+  https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
 
 Configuration
 -------------
 
 All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
 image is used to boot on individual EVMs. The platform configuration is
-specified through DTS. Following are the DTS used:-
-	K2HK EVM : k2hk-evm.dts
-	K2E EVM  : k2e-evm.dts
-	K2L EVM  : k2l-evm.dts
+specified through DTS. Following are the DTS used:
+
+	K2HK EVM:
+		k2hk-evm.dts
+	K2E EVM:
+		k2e-evm.dts
+	K2L EVM:
+		k2l-evm.dts
 
 The device tree documentation for the keystone machines are located at
+
         Documentation/devicetree/bindings/arm/keystone/keystone.txt
 
 Document Author
 ---------------
 Murali Karicheri <m-karicheri2@ti.com>
+
 Copyright 2015 Texas Instruments
diff --git a/Documentation/arm/marvel.rst b/Documentation/arm/marvel.rst
new file mode 100644
index 000000000000..16ab2eb085b8
--- /dev/null
+++ b/Documentation/arm/marvel.rst
@@ -0,0 +1,488 @@
+================
+ARM Marvell SoCs
+================
+
+This document lists all the ARM Marvell SoCs that are currently
+supported in mainline by the Linux kernel. As the Marvell families of
+SoCs are large and complex, it is hard to understand where the support
+for a particular SoC is available in the Linux kernel. This document
+tries to help in understanding where those SoCs are supported, and to
+match them with their corresponding public datasheet, when available.
+
+Orion family
+------------
+
+  Flavors:
+        - 88F5082
+        - 88F5181
+        - 88F5181L
+        - 88F5182
+
+               - Datasheet: http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf
+               - Programmer's User Guide: http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
+               - User Manual: http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
+        - 88F5281
+
+               - Datasheet: http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
+        - 88F6183
+  Core:
+	Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-orion5x
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+Kirkwood family
+---------------
+
+  Flavors:
+        - 88F6282 a.k.a Armada 300
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6283 a.k.a Armada 310
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6190
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6192
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6182
+        - 88F6180
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6281
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+  Homepage:
+	http://www.marvell.com/embedded-processors/kirkwood/
+  Core:
+	Feroceon 88fr131 ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+Discovery family
+----------------
+
+  Flavors:
+        - MV78100
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        - MV78200
+
+                - Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
+                - Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
+                - Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        - MV76100
+
+                Not supported by the Linux kernel.
+
+  Core:
+	Feroceon 88fr571-vd ARMv5 compatible
+
+  Linux kernel mach directory:
+	arch/arm/mach-mv78xx0
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+EBU Armada family
+-----------------
+
+  Armada 370 Flavors:
+        - 88F6710
+        - 88F6707
+        - 88F6W11
+
+    - Product Brief:   http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+    - Hardware Spec:   http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
+    - Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
+
+  Core:
+	Sheeva ARMv7 compatible PJ4B
+
+  Armada 375 Flavors:
+	- 88F6720
+
+    - Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 38x Flavors:
+	- 88F6810	Armada 380
+	- 88F6820 Armada 385
+	- 88F6828 Armada 388
+
+    - Product infos:   http://www.marvell.com/embedded-processors/armada-38x/
+    - Functional Spec: https://marvellcorp.wufoo.com/forms/marvell-armada-38x-functional-specifications/
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 39x Flavors:
+	- 88F6920 Armada 390
+	- 88F6928 Armada 398
+
+    - Product infos: http://www.marvell.com/embedded-processors/armada-39x/
+
+  Core:
+	ARM Cortex-A9
+
+  Armada XP Flavors:
+        - MV78230
+        - MV78260
+        - MV78460
+
+    NOTE:
+	not to be confused with the non-SMP 78xx0 SoCs
+
+    Product Brief:
+	http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+
+    Functional Spec:
+	http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
+
+    - Hardware Specs:
+
+        - http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
+        - http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
+        - http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
+
+  Core:
+	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
+
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+EBU Armada family ARMv8
+-----------------------
+
+  Armada 3710/3720 Flavors:
+	- 88F3710
+	- 88F3720
+
+  Core:
+	ARM Cortex A53 (ARMv8)
+
+  Homepage:
+	http://www.marvell.com/embedded-processors/armada-3700/
+
+  Product Brief:
+	http://www.marvell.com/embedded-processors/assets/PB-88F3700-FNL.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-37*
+
+  Armada 7K Flavors:
+	  - 88F7020 (AP806 Dual + one CP110)
+	  - 88F7040 (AP806 Quad + one CP110)
+
+  Core: ARM Cortex A72
+
+  Homepage:
+	http://www.marvell.com/embedded-processors/armada-70xx/
+
+  Product Brief:
+	  - http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf
+	  - http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-70*
+
+  Armada 8K Flavors:
+	- 88F8020 (AP806 Dual + two CP110)
+	- 88F8040 (AP806 Quad + two CP110)
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	http://www.marvell.com/embedded-processors/armada-80xx/
+
+  Product Brief:
+	  - http://www.marvell.com/embedded-processors/assets/Armada8020PB-Jan2016.pdf
+	  - http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-80*
+
+Avanta family
+-------------
+
+  Flavors:
+       - 88F6510
+       - 88F6530P
+       - 88F6550
+       - 88F6560
+
+  Homepage:
+	http://www.marvell.com/broadband/
+
+  Product Brief:
+	http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
+
+  No public datasheet available.
+
+  Core:
+	ARMv5 compatible
+
+  Linux kernel mach directory:
+	no code in mainline yet, planned for the future
+  Linux kernel plat directory:
+	no code in mainline yet, planned for the future
+
+Storage family
+--------------
+
+  Armada SP:
+	- 88RC1580
+
+  Product infos:
+	http://www.marvell.com/storage/armada-sp/
+
+  Core:
+	Sheeva ARMv7 comatible Quad-core PJ4C
+
+  (not supported in upstream Linux kernel)
+
+Dove family (application processor)
+-----------------------------------
+
+  Flavors:
+        - 88AP510 a.k.a Armada 510
+
+   Product Brief:
+	http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
+
+   Hardware Spec:
+	http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
+
+  Functional Spec:
+	http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
+
+  Homepage:
+	http://www.marvell.com/application-processors/armada-500/
+
+  Core:
+	ARMv7 compatible
+
+  Directory:
+	- arch/arm/mach-mvebu (DT enabled platforms)
+        - arch/arm/mach-dove (non-DT enabled platforms)
+
+PXA 2xx/3xx/93x/95x family
+--------------------------
+
+  Flavors:
+        - PXA21x, PXA25x, PXA26x
+             - Application processor only
+             - Core: ARMv5 XScale1 core
+        - PXA270, PXA271, PXA272
+             - Product Brief         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
+             - Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
+             - Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
+             - Specification         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
+             - Specification update  : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
+             - Application processor only
+             - Core: ARMv5 XScale2 core
+        - PXA300, PXA310, PXA320
+             - PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
+             - PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
+             - PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
+             - Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
+             - Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
+             - Specifications        : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
+             - Specification Update  : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
+             - Reference Manual      : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
+             - Application processor only
+             - Core: ARMv5 XScale3 core
+        - PXA930, PXA935
+             - Application processor with Communication processor
+             - Core: ARMv5 XScale3 core
+        - PXA955
+             - Application processor with Communication processor
+             - Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
+      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
+      the later PXA95x were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the MMP/MMP2 family of SoCs.
+
+   Linux kernel mach directory:
+	arch/arm/mach-pxa
+   Linux kernel plat directory:
+	arch/arm/plat-pxa
+
+MMP/MMP2/MMP3 family (communication processor)
+----------------------------------------------
+
+   Flavors:
+        - PXA168, a.k.a Armada 168
+             - Homepage             : http://www.marvell.com/application-processors/armada-100/armada-168.jsp
+             - Product brief        : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
+             - Hardware manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
+             - Software manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
+             - Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
+             - Boot ROM manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
+             - App node package     : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
+             - Application processor only
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA910/PXA920
+             - Homepage             : http://www.marvell.com/communication-processors/pxa910/
+             - Product Brief        : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf
+             - Application processor with Communication processor
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA688, a.k.a. MMP2, a.k.a Armada 610
+             - Product Brief        : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
+             - Application processor only
+             - Core: ARMv7 compatible Sheeva PJ4 88sv581x core
+	- PXA2128, a.k.a. MMP3 (OLPC XO4, Linux support not upstream)
+	     - Product Brief	  : http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf
+	     - Application processor only
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4C core
+	- PXA960/PXA968/PXA978 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: ARMv7 compatible Sheeva PJ4 core
+	- PXA986/PXA988 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core
+	- PXA1088/PXA1920 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: quad-core ARMv7 Cortex-A7
+	- PXA1908/PXA1928/PXA1936
+	     - Application processor with Communication Processor
+	     - Core: multi-core ARMv8 Cortex-A53
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. All the processors of
+      this MMP/MMP2 family were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the PXA family of SoCs listed above.
+
+   Linux kernel mach directory:
+	arch/arm/mach-mmp
+   Linux kernel plat directory:
+	arch/arm/plat-pxa
+
+Berlin family (Multimedia Solutions)
+-------------------------------------
+
+  - Flavors:
+	- 88DE3010, Armada 1000 (no Linux support)
+		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
+		- Product Brief:	http://www.marvell.com.cn/digital-entertainment/assets/armada_1000_pb.pdf
+	- 88DE3005, Armada 1500 Mini
+		- Design name:	BG2CD
+		- Core:		ARM Cortex-A9, PL310 L2CC
+	- 88DE3006, Armada 1500 Mini Plus
+		- Design name:	BG2CDP
+		- Core:		Dual Core ARM Cortex-A7
+	- 88DE3100, Armada 1500
+		- Design name:	BG2
+		- Core:		Marvell PJ4B-MP (ARMv7), Tauros3 L2CC
+	- 88DE3114, Armada 1500 Pro
+		- Design name:	BG2Q
+		- Core:		Quad Core ARM Cortex-A9, PL310 L2CC
+	- 88DE3214, Armada 1500 Pro 4K
+		- Design name:	BG3
+		- Core:		ARM Cortex-A15, CA15 integrated L2CC
+	- 88DE3218, ARMADA 1500 Ultra
+		- Core:		ARM Cortex-A53
+
+  Homepage: https://www.synaptics.com/products/multimedia-solutions
+  Directory: arch/arm/mach-berlin
+
+  Comments:
+
+   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
+     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
+
+   * The Berlin family was acquired by Synaptics from Marvell in 2017.
+
+CPU Cores
+---------
+
+The XScale cores were designed by Intel, and shipped by Marvell in the older
+PXA processors. Feroceon is a Marvell designed core that developed in-house,
+and that evolved into Sheeva. The XScale and Feroceon cores were phased out
+over time and replaced with Sheeva cores in later products, which subsequently
+got replaced with licensed ARM Cortex-A cores.
+
+  XScale 1
+	CPUID 0x69052xxx
+	ARMv5, iWMMXt
+  XScale 2
+	CPUID 0x69054xxx
+	ARMv5, iWMMXt
+  XScale 3
+	CPUID 0x69056xxx or 0x69056xxx
+	ARMv5, iWMMXt
+  Feroceon-1850 88fr331 "Mohawk"
+	CPUID 0x5615331x or 0x41xx926x
+	ARMv5TE, single issue
+  Feroceon-2850 88fr531-vd "Jolteon"
+	CPUID 0x5605531x or 0x41xx926x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr571-vd "Jolteon"
+	CPUID 0x5615571x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr131 "Mohawk-D"
+	CPUID 0x5625131x
+	ARMv5TE, single-issue in-order
+  Sheeva PJ1 88sv331 "Mohawk"
+	CPUID 0x561584xx
+	ARMv5, single-issue iWMMXt v2
+  Sheeva PJ4 88sv581x "Flareon"
+	CPUID 0x560f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B 88sv581x
+	CPUID 0x561f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B-MP / PJ4C
+	CPUID 0x562f584x
+	ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON
+
+Long-term plans
+---------------
+
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
+   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
+   Business Unit) in a single mach-<foo> directory. The plat-orion/
+   would therefore disappear.
+
+ * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
+   directory. The plat-pxa/ would therefore disappear.
+
+Credits
+-------
+
+- Maen Suleiman <maen@marvell.com>
+- Lior Amsalem <alior@marvell.com>
+- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+- Andrew Lunn <andrew@lunn.ch>
+- Nicolas Pitre <nico@fluxnic.net>
+- Eric Miao <eric.y.miao@gmail.com>
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment.rst
index e110e2781039..aa22893b62bc 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment.rst
@@ -1,3 +1,7 @@
+================
+Memory alignment
+================
+
 Too many problems popped up because of unnoticed misaligned memory access in
 kernel code lately.  Therefore the alignment fixup is now unconditionally
 configured in for SA11x0 based targets.  According to Alan Cox, this is a
@@ -26,9 +30,9 @@ space, and might cause programs to fail unexpectedly.
 To change the alignment trap behavior, simply echo a number into
 /proc/cpu/alignment.  The number is made up from various bits:
 
+===		========================================================
 bit		behavior when set
----		-----------------
-
+===		========================================================
 0		A user process performing an unaligned memory access
 		will cause the kernel to print a message indicating
 		process name, pid, pc, instruction, address, and the
@@ -41,12 +45,13 @@ bit		behavior when set
 
 2		The kernel will send a SIGBUS signal to the user process
 		performing the unaligned access.
+===		========================================================
 
 Note that not all combinations are supported - only values 0 through 5.
 (6 and 7 don't make sense).
 
 For example, the following will turn on the warnings, but without
-fixing up or sending SIGBUS signals:
+fixing up or sending SIGBUS signals::
 
 	echo 1 > /proc/cpu/alignment
 
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.rst
index 546a39048eb0..0521b4ce5c96 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.rst
@@ -1,6 +1,9 @@
-		Kernel Memory Layout on ARM Linux
+=================================
+Kernel Memory Layout on ARM Linux
+=================================
 
 		Russell King <rmk@arm.linux.org.uk>
+
 		     November 17, 2005 (2.6.15)
 
 This document describes the virtual memory layout which the Linux
@@ -15,8 +18,9 @@ As the ARM architecture matures, it becomes necessary to reserve
 certain regions of VM space for use for new facilities; therefore
 this document may reserve more VM space over time.
 
+=============== =============== ===============================================
 Start		End		Use
---------------------------------------------------------------------------
+=============== =============== ===============================================
 ffff8000	ffffffff	copy_user_page / clear_user_page use.
 				For SA11xx and Xscale, this is used to
 				setup a minicache mapping.
@@ -77,6 +81,7 @@ MODULES_VADDR	MODULES_END-1	Kernel module space
 				place their vector page here.  NULL pointer
 				dereferences by both the kernel and user
 				space are also caught via this mapping.
+=============== =============== ===============================================
 
 Please note that mappings which collide with the above areas may result
 in a non-bootable kernel, or may cause the kernel to (eventually) panic
diff --git a/Documentation/arm/Microchip/README b/Documentation/arm/microchip.rst
index a366f37d38f1..c9a44c98e868 100644
--- a/Documentation/arm/Microchip/README
+++ b/Documentation/arm/microchip.rst
@@ -1,3 +1,4 @@
+=============================
 ARM Microchip SoCs (aka AT91)
 =============================
 
@@ -22,32 +23,46 @@ the Microchip website: http://www.microchip.com.
   Flavors:
     * ARM 920 based SoC
       - at91rm9200
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
 
     * ARM 926 based SoCs
       - at91sam9260
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
 
       - at91sam9xe
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
 
       - at91sam9261
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
 
       - at91sam9263
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
 
       - at91sam9rl
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
 
       - at91sam9g20
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
 
       - at91sam9g45 family
@@ -55,7 +70,9 @@ the Microchip website: http://www.microchip.com.
         - at91sam9g46
         - at91sam9m10
         - at91sam9m11 (device superset)
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
 
       - at91sam9x5 family (aka "The 5 series")
@@ -64,33 +81,44 @@ the Microchip website: http://www.microchip.com.
         - at91sam9g35
         - at91sam9x25
         - at91sam9x35
-        + Datasheet (can be considered as covering the whole family)
+
+          * Datasheet (can be considered as covering the whole family)
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
 
       - at91sam9n12
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
 
     * ARM Cortex-A5 based SoCs
       - sama5d3 family
+
         - sama5d31
         - sama5d33
         - sama5d34
         - sama5d35
         - sama5d36 (device superset)
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
 
     * ARM Cortex-A5 + NEON based SoCs
       - sama5d4 family
+
         - sama5d41
         - sama5d42
         - sama5d43
         - sama5d44 (device superset)
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
 
       - sama5d2 family
+
         - sama5d21
         - sama5d22
         - sama5d23
@@ -98,11 +126,14 @@ the Microchip website: http://www.microchip.com.
         - sama5d26
         - sama5d27 (device superset)
         - sama5d28 (device superset + environmental monitors)
-        + Datasheet
+
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
 
     * ARM Cortex-M7 MCUs
       - sams70 family
+
         - sams70j19
         - sams70j20
         - sams70j21
@@ -114,6 +145,7 @@ the Microchip website: http://www.microchip.com.
         - sams70q21
 
       - samv70 family
+
         - samv70j19
         - samv70j20
         - samv70n19
@@ -122,6 +154,7 @@ the Microchip website: http://www.microchip.com.
         - samv70q20
 
       - samv71 family
+
         - samv71j19
         - samv71j20
         - samv71j21
@@ -132,7 +165,8 @@ the Microchip website: http://www.microchip.com.
         - samv71q20
         - samv71q21
 
-        + Datasheet
+          * Datasheet
+
           http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf
 
 
@@ -157,6 +191,7 @@ definition of a "Stable" binding/ABI.
 This statement will be removed by AT91 MAINTAINERS when appropriate.
 
 Naming conventions and best practice:
+
 - SoCs Device Tree Source Include files are named after the official name of
   the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
 - Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
diff --git a/Documentation/arm/netwinder.rst b/Documentation/arm/netwinder.rst
new file mode 100644
index 000000000000..8eab66caa2ac
--- /dev/null
+++ b/Documentation/arm/netwinder.rst
@@ -0,0 +1,85 @@
+================================
+NetWinder specific documentation
+================================
+
+The NetWinder is a small low-power computer, primarily designed
+to run Linux.  It is based around the StrongARM RISC processor,
+DC21285 PCI bridge, with PC-type hardware glued around it.
+
+Port usage
+==========
+
+=======  ====== ===============================
+Min      Max	Description
+=======  ====== ===============================
+0x0000   0x000f	DMA1
+0x0020   0x0021	PIC1
+0x0060   0x006f	Keyboard
+0x0070   0x007f	RTC
+0x0080   0x0087	DMA1
+0x0088   0x008f	DMA2
+0x00a0   0x00a3	PIC2
+0x00c0   0x00df	DMA2
+0x0180   0x0187	IRDA
+0x01f0   0x01f6	ide0
+0x0201		Game port
+0x0203		RWA010 configuration read
+0x0220   ?	SoundBlaster
+0x0250   ?	WaveArtist
+0x0279		RWA010 configuration index
+0x02f8   0x02ff	Serial ttyS1
+0x0300   0x031f	Ether10
+0x0338		GPIO1
+0x033a		GPIO2
+0x0370   0x0371	W83977F configuration registers
+0x0388   ?	AdLib
+0x03c0   0x03df	VGA
+0x03f6		ide0
+0x03f8   0x03ff	Serial ttyS0
+0x0400   0x0408	DC21143
+0x0480   0x0487	DMA1
+0x0488   0x048f	DMA2
+0x0a79		RWA010 configuration write
+0xe800   0xe80f	ide0/ide1 BM DMA
+=======  ====== ===============================
+
+
+Interrupt usage
+===============
+
+======= ======= ========================
+IRQ	type	Description
+======= ======= ========================
+ 0	ISA	100Hz timer
+ 1	ISA	Keyboard
+ 2	ISA	cascade
+ 3	ISA	Serial ttyS1
+ 4	ISA	Serial ttyS0
+ 5	ISA	PS/2 mouse
+ 6	ISA	IRDA
+ 7	ISA	Printer
+ 8	ISA	RTC alarm
+ 9	ISA
+10	ISA	GP10 (Orange reset button)
+11	ISA
+12	ISA	WaveArtist
+13	ISA
+14	ISA	hda1
+15	ISA
+======= ======= ========================
+
+DMA usage
+=========
+
+======= ======= ===========
+DMA	type	Description
+======= ======= ===========
+ 0	ISA	IRDA
+ 1	ISA
+ 2	ISA	cascade
+ 3	ISA	WaveArtist
+ 4	ISA
+ 5	ISA
+ 6	ISA
+ 7	ISA	WaveArtist
+======= ======= ===========
diff --git a/Documentation/arm/nwfpe/index.rst b/Documentation/arm/nwfpe/index.rst
new file mode 100644
index 000000000000..3c4d2f9aa10e
--- /dev/null
+++ b/Documentation/arm/nwfpe/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+NetWinder's floating point emulator
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   nwfpe
+   netwinder-fpe
+   notes
+   todo
diff --git a/Documentation/arm/nwfpe/README.FPE b/Documentation/arm/nwfpe/netwinder-fpe.rst
index 26f5d7bb9a41..cbb320960fc4 100644
--- a/Documentation/arm/nwfpe/README.FPE
+++ b/Documentation/arm/nwfpe/netwinder-fpe.rst
@@ -1,12 +1,18 @@
+=============
+Current State
+=============
+
 The following describes the current state of the NetWinder's floating point
 emulator.
 
 In the following nomenclature is used to describe the floating point
 instructions.  It follows the conventions in the ARM manual.
 
-<S|D|E> = <single|double|extended>, no default
-{P|M|Z} = {round to +infinity,round to -infinity,round to zero},
-          default = round to nearest
+::
+
+  <S|D|E> = <single|double|extended>, no default
+  {P|M|Z} = {round to +infinity,round to -infinity,round to zero},
+            default = round to nearest
 
 Note: items enclosed in {} are optional.
 
@@ -32,10 +38,10 @@ Form 2 syntax:
 <LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!}
 
 These instructions are fully implemented.  They store/load three words
-for each floating point register into the memory location given in the 
+for each floating point register into the memory location given in the
 instruction.  The format in memory is unlikely to be compatible with
 other implementations, in particular the actual hardware.  Specific
-mention of this is made in the ARM manuals.  
+mention of this is made in the ARM manuals.
 
 Floating Point Coprocessor Register Transfer Instructions (CPRT)
 ----------------------------------------------------------------
@@ -123,7 +129,7 @@ RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
 POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
 
 LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
-LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e 
+LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
 EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
 SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
 COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
@@ -134,7 +140,7 @@ ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
 
 These are not implemented.  They are not currently issued by the compiler,
 and are handled by routines in libc.  These are not implemented by the FPA11
-hardware, but are handled by the floating point support code.  They should 
+hardware, but are handled by the floating point support code.  They should
 be implemented in future versions.
 
 Signalling:
@@ -147,10 +153,10 @@ current_set[0] correctly.
 The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains
 a fix for this problem and also incorporates the current version of the
 emulator directly.  It is possible to run with no floating point module
-loaded with this kernel.  It is provided as a demonstration of the 
+loaded with this kernel.  It is provided as a demonstration of the
 technology and for those who want to do floating point work that depends
 on signals.  It is not strictly necessary to use the module.
 
-A module (either the one provided by Russell King, or the one in this 
+A module (either the one provided by Russell King, or the one in this
 distribution) can be loaded to replace the functionality of the emulator
 built into the kernel.
diff --git a/Documentation/arm/nwfpe/NOTES b/Documentation/arm/nwfpe/notes.rst
index 40577b5a49d3..102e55af8439 100644
--- a/Documentation/arm/nwfpe/NOTES
+++ b/Documentation/arm/nwfpe/notes.rst
@@ -1,3 +1,6 @@
+Notes
+=====
+
 There seems to be a problem with exp(double) and our emulator.  I haven't
 been able to track it down yet.  This does not occur with the emulator
 supplied by Russell King.
diff --git a/Documentation/arm/nwfpe/README b/Documentation/arm/nwfpe/nwfpe.rst
index 771871de0c8b..35cd90dacbff 100644
--- a/Documentation/arm/nwfpe/README
+++ b/Documentation/arm/nwfpe/nwfpe.rst
@@ -1,4 +1,7 @@
-This directory contains the version 0.92 test release of the NetWinder 
+Introduction
+============
+
+This directory contains the version 0.92 test release of the NetWinder
 Floating Point Emulator.
 
 The majority of the code was written by me, Scott Bambrough It is
@@ -31,7 +34,7 @@ SoftFloat to the ARM was done by Phil Blundell, based on an earlier
 port of SoftFloat version 1 by Neil Carson for NetBSD/arm32.
 
 The file README.FPE contains a description of what has been implemented
-so far in the emulator.  The file TODO contains a information on what 
+so far in the emulator.  The file TODO contains a information on what
 remains to be done, and other ideas for the emulator.
 
 Bug reports, comments, suggestions should be directed to me at
@@ -48,10 +51,11 @@ Legal Notices
 
 The NetWinder Floating Point Emulator is free software.  Everything Rebel.com
 has written is provided under the GNU GPL.  See the file COPYING for copying
-conditions.  Excluded from the above is the SoftFloat code.  John Hauser's 
+conditions.  Excluded from the above is the SoftFloat code.  John Hauser's
 legal notice for SoftFloat is included below.
 
 -------------------------------------------------------------------------------
+
 SoftFloat Legal Notice
 
 SoftFloat was written by John R. Hauser.  This work was made possible in
diff --git a/Documentation/arm/nwfpe/TODO b/Documentation/arm/nwfpe/todo.rst
index 8027061b60eb..393f11b14540 100644
--- a/Documentation/arm/nwfpe/TODO
+++ b/Documentation/arm/nwfpe/todo.rst
@@ -1,39 +1,42 @@
 TODO LIST
----------
+=========
 
-POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
-RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
-POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+::
 
-LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
-LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e 
-EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
-SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
-COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
-TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
-ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
-ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
-ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
+  POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
+  RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
+  POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+
+  LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
+  LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
+  EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
+  SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
+  COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
+  TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
+  ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
+  ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
+  ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
 
 These are not implemented.  They are not currently issued by the compiler,
 and are handled by routines in libc.  These are not implemented by the FPA11
-hardware, but are handled by the floating point support code.  They should 
+hardware, but are handled by the floating point support code.  They should
 be implemented in future versions.
 
 There are a couple of ways to approach the implementation of these.  One
-method would be to use accurate table methods for these routines.  I have 
+method would be to use accurate table methods for these routines.  I have
 a couple of papers by S. Gal from IBM's research labs in Haifa, Israel that
 seem to promise extreme accuracy (in the order of 99.8%) and reasonable speed.
 These methods are used in GLIBC for some of the transcendental functions.
 
 Another approach, which I know little about is CORDIC.  This stands for
-Coordinate Rotation Digital Computer, and is a method of computing 
+Coordinate Rotation Digital Computer, and is a method of computing
 transcendental functions using mostly shifts and adds and a few
 multiplications and divisions.  The ARM excels at shifts and adds,
-so such a method could be promising, but requires more research to 
+so such a method could be promising, but requires more research to
 determine if it is feasible.
 
 Rounding Methods
+----------------
 
 The IEEE standard defines 4 rounding modes.  Round to nearest is the
 default, but rounding to + or - infinity or round to zero are also allowed.
@@ -42,8 +45,8 @@ in a control register.  Not so with the ARM FPA11 architecture.  To change
 the rounding mode one must specify it with each instruction.
 
 This has made porting some benchmarks difficult.  It is possible to
-introduce such a capability into the emulator.  The FPCR contains 
-bits describing the rounding mode.  The emulator could be altered to 
+introduce such a capability into the emulator.  The FPCR contains
+bits describing the rounding mode.  The emulator could be altered to
 examine a flag, which if set forced it to ignore the rounding mode in
 the instruction, and use the mode specified in the bits in the FPCR.
 
@@ -52,7 +55,8 @@ in the FPCR.  This requires a kernel call in ArmLinux, as WFC/RFC are
 supervisor only instructions.  If anyone has any ideas or comments I
 would like to hear them.
 
-[NOTE: pulled out from some docs on ARM floating point, specifically
+NOTE:
+ pulled out from some docs on ARM floating point, specifically
  for the Acorn FPE, but not limited to it:
 
  The floating point control register (FPCR) may only be present in some
@@ -64,4 +68,5 @@ would like to hear them.
 
  Hence, the answer is yes, you could do this, but then you will run a high
  risk of becoming isolated if and when hardware FP emulation comes out
-		-- Russell].
+
+		-- Russell.
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/omap/dss.rst
index 4484e021290e..a40c4d9c717a 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/omap/dss.rst
@@ -1,5 +1,6 @@
+=========================
 OMAP2/3 Display Subsystem
--------------------------
+=========================
 
 This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
 (let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
@@ -190,6 +191,8 @@ trans_key_value			transparency color key (RGB24)
 default_color			default background color (RGB24)
 
 /sys/devices/platform/omapdss/display? directory:
+
+=============== =============================================================
 ctrl_name	Controller name
 mirror		0=off, 1=on
 update_mode	0=off, 1=auto, 2=manual
@@ -202,6 +205,7 @@ timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
 panel_name
 tear_elim	Tearing elimination 0=off, 1=on
 output_type	Output type (video encoder only): "composite" or "svideo"
+=============== =============================================================
 
 There are also some debugfs files at <debugfs>/omapdss/ which show information
 about clocks and registers.
@@ -209,22 +213,22 @@ about clocks and registers.
 Examples
 --------
 
-The following definitions have been made for the examples below:
+The following definitions have been made for the examples below::
 
-ovl0=/sys/devices/platform/omapdss/overlay0
-ovl1=/sys/devices/platform/omapdss/overlay1
-ovl2=/sys/devices/platform/omapdss/overlay2
+	ovl0=/sys/devices/platform/omapdss/overlay0
+	ovl1=/sys/devices/platform/omapdss/overlay1
+	ovl2=/sys/devices/platform/omapdss/overlay2
 
-mgr0=/sys/devices/platform/omapdss/manager0
-mgr1=/sys/devices/platform/omapdss/manager1
+	mgr0=/sys/devices/platform/omapdss/manager0
+	mgr1=/sys/devices/platform/omapdss/manager1
 
-lcd=/sys/devices/platform/omapdss/display0
-dvi=/sys/devices/platform/omapdss/display1
-tv=/sys/devices/platform/omapdss/display2
+	lcd=/sys/devices/platform/omapdss/display0
+	dvi=/sys/devices/platform/omapdss/display1
+	tv=/sys/devices/platform/omapdss/display2
 
-fb0=/sys/class/graphics/fb0
-fb1=/sys/class/graphics/fb1
-fb2=/sys/class/graphics/fb2
+	fb0=/sys/class/graphics/fb0
+	fb1=/sys/class/graphics/fb1
+	fb2=/sys/class/graphics/fb2
 
 Default setup on OMAP3 SDP
 --------------------------
@@ -232,55 +236,59 @@ Default setup on OMAP3 SDP
 Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
 and TV-out are not in use. The columns from left to right are:
 framebuffers, overlays, overlay managers, displays. Framebuffers are
-handled by omapfb, and the rest by the DSS.
+handled by omapfb, and the rest by the DSS::
 
-FB0 --- GFX  -\            DVI
-FB1 --- VID1 --+- LCD ---- LCD
-FB2 --- VID2 -/   TV ----- TV
+	FB0 --- GFX  -\            DVI
+	FB1 --- VID1 --+- LCD ---- LCD
+	FB2 --- VID2 -/   TV ----- TV
 
 Example: Switch from LCD to DVI
-----------------------
+-------------------------------
+
+::
 
-w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
-h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+	w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
 
-echo "0" > $lcd/enabled
-echo "" > $mgr0/display
-fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
-# at this point you have to switch the dvi/lcd dip-switch from the omap board
-echo "dvi" > $mgr0/display
-echo "1" > $dvi/enabled
+	echo "0" > $lcd/enabled
+	echo "" > $mgr0/display
+	fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+	# at this point you have to switch the dvi/lcd dip-switch from the omap board
+	echo "dvi" > $mgr0/display
+	echo "1" > $dvi/enabled
 
-After this the configuration looks like:
+After this the configuration looks like:::
 
-FB0 --- GFX  -\         -- DVI
-FB1 --- VID1 --+- LCD -/   LCD
-FB2 --- VID2 -/   TV ----- TV
+	FB0 --- GFX  -\         -- DVI
+	FB1 --- VID1 --+- LCD -/   LCD
+	FB2 --- VID2 -/   TV ----- TV
 
 Example: Clone GFX overlay to LCD and TV
--------------------------------
+----------------------------------------
+
+::
 
-w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
-h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+	w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
 
-echo "0" > $ovl0/enabled
-echo "0" > $ovl1/enabled
+	echo "0" > $ovl0/enabled
+	echo "0" > $ovl1/enabled
 
-echo "" > $fb1/overlays
-echo "0,1" > $fb0/overlays
+	echo "" > $fb1/overlays
+	echo "0,1" > $fb0/overlays
 
-echo "$w,$h" > $ovl1/output_size
-echo "tv" > $ovl1/manager
+	echo "$w,$h" > $ovl1/output_size
+	echo "tv" > $ovl1/manager
 
-echo "1" > $ovl0/enabled
-echo "1" > $ovl1/enabled
+	echo "1" > $ovl0/enabled
+	echo "1" > $ovl1/enabled
 
-echo "1" > $tv/enabled
+	echo "1" > $tv/enabled
 
-After this the configuration looks like (only relevant parts shown):
+After this the configuration looks like (only relevant parts shown)::
 
-FB0 +-- GFX  ---- LCD ---- LCD
-     \- VID1 ---- TV  ---- TV
+	FB0 +-- GFX  ---- LCD ---- LCD
+	\- VID1 ---- TV  ---- TV
 
 Misc notes
 ----------
@@ -351,12 +359,14 @@ TODO
 DSS locking
 
 Error checking
+
 - Lots of checks are missing or implemented just as BUG()
 
 System DMA update for DSI
+
 - Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
   to skip the empty byte?)
 
 OMAP1 support
-- Not sure if needed
 
+- Not sure if needed
diff --git a/Documentation/arm/omap/index.rst b/Documentation/arm/omap/index.rst
new file mode 100644
index 000000000000..8b365b212e49
--- /dev/null
+++ b/Documentation/arm/omap/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+TI OMAP
+=======
+
+.. toctree::
+   :maxdepth: 1
+
+   omap
+   omap_pm
+   dss
diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/omap/omap.rst
index 90c6c57d61e8..f440c0f4613f 100644
--- a/Documentation/arm/OMAP/README
+++ b/Documentation/arm/omap/omap.rst
@@ -1,7 +1,13 @@
+============
+OMAP history
+============
+
 This file contains documentation for running mainline
 kernel on omaps.
 
+======		======================================================
 KERNEL		NEW DEPENDENCIES
+======		======================================================
 v4.3+		Update is needed for custom .config files to make sure
 		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
 		properly.
@@ -9,3 +15,4 @@ v4.3+		Update is needed for custom .config files to make sure
 v4.18+		Update is needed for custom .config files to make sure
 		CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
 		to work in DRA7 and K2G based boards.
+======		======================================================
diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/omap/omap_pm.rst
index 4ae915a9f899..a335e4c8ce2c 100644
--- a/Documentation/arm/OMAP/omap_pm
+++ b/Documentation/arm/omap/omap_pm.rst
@@ -1,4 +1,4 @@
-
+=====================
 The OMAP PM interface
 =====================
 
@@ -31,19 +31,24 @@ Drivers need to express PM parameters which:
 This document proposes the OMAP PM interface, including the following
 five power management functions for driver code:
 
-1. Set the maximum MPU wakeup latency:
+1. Set the maximum MPU wakeup latency::
+
    (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
 
-2. Set the maximum device wakeup latency:
+2. Set the maximum device wakeup latency::
+
    (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
 
-3. Set the maximum system DMA transfer start latency (CORE pwrdm):
+3. Set the maximum system DMA transfer start latency (CORE pwrdm)::
+
    (*pdata->set_max_sdma_lat)(struct device *dev, long t)
 
-4. Set the minimum bus throughput needed by a device:
+4. Set the minimum bus throughput needed by a device::
+
    (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
 
-5. Return the number of times the device has lost context
+5. Return the number of times the device has lost context::
+
    (*pdata->get_dev_context_loss_count)(struct device *dev)
 
 
@@ -65,12 +70,13 @@ Driver usage of the OMAP PM functions
 
 As the 'pdata' in the above examples indicates, these functions are
 exposed to drivers through function pointers in driver .platform_data
-structures.  The function pointers are initialized by the board-*.c
+structures.  The function pointers are initialized by the `board-*.c`
 files to point to the corresponding OMAP PM functions:
-.set_max_dev_wakeup_lat will point to
-omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
-not support these functions should leave these function pointers set
-to NULL.  Drivers should use the following idiom:
+
+- set_max_dev_wakeup_lat will point to
+  omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+  not support these functions should leave these function pointers set
+  to NULL.  Drivers should use the following idiom::
 
         if (pdata->set_max_dev_wakeup_lat)
             (*pdata->set_max_dev_wakeup_lat)(dev, t);
@@ -81,7 +87,7 @@ becomes accessible.  To accomplish this, driver writers should use the
 set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
 latency, and the set_max_dev_wakeup_lat() function to constrain the
 device wakeup latency (from clk_enable() to accessibility).  For
-example,
+example::
 
         /* Limit MPU wakeup latency */
         if (pdata->set_max_mpu_wakeup_lat)
@@ -116,17 +122,17 @@ specialized cases to convert that input information (OPPs/MPU
 frequency) into the form that the underlying power management
 implementation needs:
 
-6. (*pdata->dsp_get_opp_table)(void)
+6. `(*pdata->dsp_get_opp_table)(void)`
 
-7. (*pdata->dsp_set_min_opp)(u8 opp_id)
+7. `(*pdata->dsp_set_min_opp)(u8 opp_id)`
 
-8. (*pdata->dsp_get_opp)(void)
+8. `(*pdata->dsp_get_opp)(void)`
 
-9. (*pdata->cpu_get_freq_table)(void)
+9. `(*pdata->cpu_get_freq_table)(void)`
 
-10. (*pdata->cpu_set_freq)(unsigned long f)
+10. `(*pdata->cpu_set_freq)(unsigned long f)`
 
-11. (*pdata->cpu_get_freq)(void)
+11. `(*pdata->cpu_get_freq)(void)`
 
 Customizing OPP for platform
 ============================
@@ -134,12 +140,15 @@ Defining CONFIG_PM should enable OPP layer for the silicon
 and the registration of OPP table should take place automatically.
 However, in special cases, the default OPP table may need to be
 tweaked, for e.g.:
+
  * enable default OPPs which are disabled by default, but which
    could be enabled on a platform
  * Disable an unsupported OPP on the platform
  * Define and add a custom opp table entry
-in these cases, the board file needs to do additional steps as follows:
-arch/arm/mach-omapx/board-xyz.c
+   in these cases, the board file needs to do additional steps as follows:
+
+arch/arm/mach-omapx/board-xyz.c::
+
 	#include "pm.h"
 	....
 	static void __init omap_xyz_init_irq(void)
@@ -150,5 +159,7 @@ arch/arm/mach-omapx/board-xyz.c
 		/* Do customization to the defaults */
 		....
 	}
-NOTE: omapx_opp_init will be omap3_opp_init or as required
-based on the omap family.
+
+NOTE:
+  omapx_opp_init will be omap3_opp_init or as required
+  based on the omap family.
diff --git a/Documentation/arm/Porting b/Documentation/arm/porting.rst
index a492233931b9..bd21958bdb2d 100644
--- a/Documentation/arm/Porting
+++ b/Documentation/arm/porting.rst
@@ -1,3 +1,7 @@
+=======
+Porting
+=======
+
 Taken from list archive at http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2001-July/004064.html
 
 Initial definitions
@@ -89,8 +93,7 @@ DATAADDR
 	Virtual address for the kernel data segment.  Must not be defined
 	when using the decompressor.
 
-VMALLOC_START
-VMALLOC_END
+VMALLOC_START / VMALLOC_END
 	Virtual addresses bounding the vmalloc() area.  There must not be
 	any static mappings in this area; vmalloc will overwrite them.
 	The addresses must also be in the kernel segment (see above).
@@ -107,13 +110,13 @@ Architecture Specific Macros
 ----------------------------
 
 BOOT_MEM(pram,pio,vio)
-	`pram' specifies the physical start address of RAM.  Must always
+	`pram` specifies the physical start address of RAM.  Must always
 	be present, and should be the same as PHYS_OFFSET.
 
-	`pio' is the physical address of an 8MB region containing IO for
+	`pio` is the physical address of an 8MB region containing IO for
 	use with the debugging macros in arch/arm/kernel/debug-armv.S.
 
-	`vio' is the virtual address of the 8MB debugging region.
+	`vio` is the virtual address of the 8MB debugging region.
 
 	It is expected that the debugging region will be re-initialised
 	by the architecture specific code later in the code (via the
@@ -132,4 +135,3 @@ MAPIO(func)
 
 INITIRQ(func)
 	Machine specific function to initialise interrupts.
-
diff --git a/Documentation/arm/pxa/mfp.txt b/Documentation/arm/pxa/mfp.rst
index 0b7cab978c02..ac34e5d7ee44 100644
--- a/Documentation/arm/pxa/mfp.txt
+++ b/Documentation/arm/pxa/mfp.rst
@@ -1,4 +1,6 @@
-                 MFP Configuration for PXA2xx/PXA3xx Processors
+==============================================
+MFP Configuration for PXA2xx/PXA3xx Processors
+==============================================
 
 			Eric Miao <eric.miao@marvell.com>
 
@@ -6,15 +8,15 @@ MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
 later PXA series processors.  This document describes the existing MFP API,
 and how board/platform driver authors could make use of it.
 
- Basic Concept
-===============
+Basic Concept
+=============
 
 Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
 mechanism is introduced from PXA3xx to completely move the pin-mux functions
 out of the GPIO controller. In addition to pin-mux configurations, the MFP
 also controls the low power state, driving strength, pull-up/down and event
 detection of each pin.  Below is a diagram of internal connections between
-the MFP logic and the remaining SoC peripherals:
+the MFP logic and the remaining SoC peripherals::
 
  +--------+
  |        |--(GPIO19)--+
@@ -69,8 +71,8 @@ NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
 mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
 pad (or ball).
 
- MFP API Usage
-===============
+MFP API Usage
+=============
 
 For board code writers, here are some guidelines:
 
@@ -94,9 +96,9 @@ For board code writers, here are some guidelines:
    PXA310 supporting some additional ones), thus the difference is actually
    covered in a single mfp-pxa300.h.
 
-2. prepare an array for the initial pin configurations, e.g.:
+2. prepare an array for the initial pin configurations, e.g.::
 
-   static unsigned long mainstone_pin_config[] __initdata = {
+     static unsigned long mainstone_pin_config[] __initdata = {
 	/* Chip Select */
 	GPIO15_nCS_1,
 
@@ -116,7 +118,7 @@ For board code writers, here are some guidelines:
 
 	/* GPIO */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-   };
+     };
 
    a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
    and written to the actual registers, they are useless and may discard,
@@ -143,17 +145,17 @@ For board code writers, here are some guidelines:
    d) although PXA3xx MFP supports edge detection on each pin, the
    internal logic will only wakeup the system when those specific bits
    in ADxER registers are set, which can be well mapped to the
-   corresponding peripheral, thus set_irq_wake() can be called with 
+   corresponding peripheral, thus set_irq_wake() can be called with
    the peripheral IRQ to enable the wakeup.
 
 
- MFP on PXA3xx
-===============
+MFP on PXA3xx
+=============
 
 Every external I/O pad on PXA3xx (excluding those for special purpose) has
 one MFP logic associated, and is controlled by one MFP register (MFPR).
 
-The MFPR has the following bit definitions (for PXA300/PXA310/PXA320):
+The MFPR has the following bit definitions (for PXA300/PXA310/PXA320)::
 
  31                        16 15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
   +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
@@ -183,8 +185,8 @@ The MFPR has the following bit definitions (for PXA300/PXA310/PXA320):
 			0b006 - slow 10mA
 			0b007 - fast 10mA
 
- MFP Design for PXA2xx/PXA3xx
-==============================
+MFP Design for PXA2xx/PXA3xx
+============================
 
 Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
 MFP API is introduced to cover both series of processors.
@@ -194,11 +196,11 @@ configurations, these definitions are processor and platform independent, and
 the actual API invoked to convert these definitions into register settings and
 make them effective there-after.
 
-  Files Involved
-  --------------
+Files Involved
+--------------
 
   - arch/arm/mach-pxa/include/mach/mfp.h
-  
+
   for
     1. Unified pin definitions - enum constants for all configurable pins
     2. processor-neutral bit definitions for a possible MFP configuration
@@ -226,42 +228,42 @@ make them effective there-after.
   for implementation of the pin configuration to take effect for the actual
   processor.
 
-  Pin Configuration
-  -----------------
+Pin Configuration
+-----------------
 
   The following comments are copied from mfp.h (see the actual source code
-  for most updated info)
-  
-  /*
-   * a possible MFP configuration is represented by a 32-bit integer
-   *
-   * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
-   * bit 10..12 - Alternate Function Selection
-   * bit 13..15 - Drive Strength
-   * bit 16..18 - Low Power Mode State
-   * bit 19..20 - Low Power Mode Edge Detection
-   * bit 21..22 - Run Mode Pull State
-   *
-   * to facilitate the definition, the following macros are provided
-   *
-   * MFP_CFG_DEFAULT - default MFP configuration value, with
-   * 		  alternate function = 0,
-   * 		  drive strength = fast 3mA (MFP_DS03X)
-   * 		  low power mode = default
-   * 		  edge detection = none
-   *
-   * MFP_CFG	- default MFPR value with alternate function
-   * MFP_CFG_DRV	- default MFPR value with alternate function and
-   * 		  pin drive strength
-   * MFP_CFG_LPM	- default MFPR value with alternate function and
-   * 		  low power mode
-   * MFP_CFG_X	- default MFPR value with alternate function,
-   * 		  pin drive strength and low power mode
-   */
-
-   Examples of pin configurations are:
-
-   #define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+  for most updated info)::
+
+    /*
+     * a possible MFP configuration is represented by a 32-bit integer
+     *
+     * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+     * bit 10..12 - Alternate Function Selection
+     * bit 13..15 - Drive Strength
+     * bit 16..18 - Low Power Mode State
+     * bit 19..20 - Low Power Mode Edge Detection
+     * bit 21..22 - Run Mode Pull State
+     *
+     * to facilitate the definition, the following macros are provided
+     *
+     * MFP_CFG_DEFAULT - default MFP configuration value, with
+     * 		  alternate function = 0,
+     * 		  drive strength = fast 3mA (MFP_DS03X)
+     * 		  low power mode = default
+     * 		  edge detection = none
+     *
+     * MFP_CFG	- default MFPR value with alternate function
+     * MFP_CFG_DRV	- default MFPR value with alternate function and
+     * 		  pin drive strength
+     * MFP_CFG_LPM	- default MFPR value with alternate function and
+     * 		  low power mode
+     * MFP_CFG_X	- default MFPR value with alternate function,
+     * 		  pin drive strength and low power mode
+     */
+
+   Examples of pin configurations are::
+
+     #define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
 
    which reads GPIO94 can be configured as SSP3_RXD, with alternate function
    selection of 1, driving strength of 0b101, and a float state in low power
@@ -272,8 +274,8 @@ make them effective there-after.
    do so, simply because this default setting is usually carefully encoded,
    and is supposed to work in most cases.
 
-  Register Settings
-  -----------------
+Register Settings
+-----------------
 
    Register settings on PXA3xx for a pin configuration is actually very
    straight-forward, most bits can be converted directly into MFPR value
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/sa1100/adsbitsy.rst
index f9f62e8c0719..c179cb26b682 100644
--- a/Documentation/arm/SA1100/ADSBitsy
+++ b/Documentation/arm/sa1100/adsbitsy.rst
@@ -1,4 +1,7 @@
+===============================
 ADS Bitsy Single Board Computer
+===============================
+
 (It is different from Bitsy(iPAQ) of Compaq)
 
 For more details, contact Applied Data Systems or see
@@ -15,7 +18,9 @@ The kernel zImage is linked to be loaded and executed at 0xc0400000.
 Linux can  be used with the ADS BootLoader that ships with the
 newer rev boards. See their documentation on how to load Linux.
 
-Supported peripherals:
+Supported peripherals
+=====================
+
 - SA1100 LCD frame buffer (8/16bpp...sort of)
 - SA1111 USB Master
 - SA1100 serial port
@@ -25,10 +30,13 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 
-To do:
+To do
+=====
+
 - everything else!  :-)
 
-Notes:
+Notes
+=====
 
 - The flash on board is divided into 3 partitions.
   You should be careful to use flash on board.
diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/sa1100/assabet.rst
index e08a6739e72c..3e704831c311 100644
--- a/Documentation/arm/SA1100/Assabet
+++ b/Documentation/arm/sa1100/assabet.rst
@@ -1,3 +1,4 @@
+============================================
 The Intel Assabet (SA-1110 evaluation) board
 ============================================
 
@@ -11,7 +12,7 @@ http://www.cs.cmu.edu/~wearable/software/assabet.html
 Building the kernel
 -------------------
 
-To build the kernel with current defaults:
+To build the kernel with current defaults::
 
 	make assabet_config
 	make oldconfig
@@ -51,9 +52,9 @@ Brief examples on how to boot Linux with RedBoot are shown below.  But first
 you need to have RedBoot installed in your flash memory.  A known to work
 precompiled RedBoot binary is available from the following location:
 
-ftp://ftp.netwinder.org/users/n/nico/
-ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
-ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
+- ftp://ftp.netwinder.org/users/n/nico/
+- ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
+- ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
 
 Look for redboot-assabet*.tgz.  Some installation infos are provided in
 redboot-assabet*.txt.
@@ -71,12 +72,12 @@ Socket Communications Inc.), you should strongly consider using it for TFTP
 file transfers.  You must insert it before RedBoot runs since it can't detect
 it dynamically.
 
-To initialize the flash directory:
+To initialize the flash directory::
 
 	fis init -f
 
 To initialize the non-volatile settings, like whether you want to use BOOTP or
-a static IP address, etc, use this command:
+a static IP address, etc, use this command::
 
 	fconfig -i
 
@@ -85,15 +86,15 @@ Writing a kernel image into flash
 ---------------------------------
 
 First, the kernel image must be loaded into RAM.  If you have the zImage file
-available on a TFTP server:
+available on a TFTP server::
 
 	load zImage -r -b 0x100000
 
-If you rather want to use Y-Modem upload over the serial port:
+If you rather want to use Y-Modem upload over the serial port::
 
 	load -m ymodem -r -b 0x100000
 
-To write it to flash:
+To write it to flash::
 
 	fis create "Linux kernel" -b 0x100000 -l 0xc0000
 
@@ -102,18 +103,18 @@ Booting the kernel
 ------------------
 
 The kernel still requires a filesystem to boot.  A ramdisk image can be loaded
-as follows:
+as follows::
 
 	load ramdisk_image.gz -r -b 0x800000
 
 Again, Y-Modem upload can be used instead of TFTP by replacing the file name
 by '-y ymodem'.
 
-Now the kernel can be retrieved from flash like this:
+Now the kernel can be retrieved from flash like this::
 
 	fis load "Linux kernel"
 
-or loaded as described previously.  To boot the kernel:
+or loaded as described previously.  To boot the kernel::
 
 	exec -b 0x100000 -l 0xc0000
 
@@ -134,35 +135,35 @@ creating JFFS/JFFS2 images is available from the same site.
 For instance, a sample JFFS2 image can be retrieved from the same FTP sites
 mentioned below for the precompiled RedBoot image.
 
-To load this file:
+To load this file::
 
 	load sample_img.jffs2 -r -b 0x100000
 
-The result should look like:
+The result should look like::
 
-RedBoot> load sample_img.jffs2 -r -b 0x100000
-Raw file loaded 0x00100000-0x00377424
+	RedBoot> load sample_img.jffs2 -r -b 0x100000
+	Raw file loaded 0x00100000-0x00377424
 
-Now we must know the size of the unallocated flash:
+Now we must know the size of the unallocated flash::
 
 	fis free
 
-Result:
+Result::
 
-RedBoot> fis free
-  0x500E0000 .. 0x503C0000
+	RedBoot> fis free
+	  0x500E0000 .. 0x503C0000
 
 The values above may be different depending on the size of the filesystem and
 the type of flash.  See their usage below as an example and take care of
 substituting yours appropriately.
 
-We must determine some values:
+We must determine some values::
 
-size of unallocated flash:	0x503c0000 - 0x500e0000 = 0x2e0000
-size of the filesystem image:	0x00377424 - 0x00100000 = 0x277424
+	size of unallocated flash:	0x503c0000 - 0x500e0000 = 0x2e0000
+	size of the filesystem image:	0x00377424 - 0x00100000 = 0x277424
 
 We want to fit the filesystem image of course, but we also want to give it all
-the remaining flash space as well.  To write it:
+the remaining flash space as well.  To write it::
 
 	fis unlock -f 0x500E0000 -l 0x2e0000
 	fis erase -f 0x500E0000 -l 0x2e0000
@@ -171,32 +172,32 @@ the remaining flash space as well.  To write it:
 
 Now the filesystem is associated to a MTD "partition" once Linux has discovered
 what they are in the boot process.  From Redboot, the 'fis list' command
-displays them:
-
-RedBoot> fis list
-Name              FLASH addr  Mem addr    Length      Entry point
-RedBoot           0x50000000  0x50000000  0x00020000  0x00000000
-RedBoot config    0x503C0000  0x503C0000  0x00020000  0x00000000
-FIS directory     0x503E0000  0x503E0000  0x00020000  0x00000000
-Linux kernel      0x50020000  0x00100000  0x000C0000  0x00000000
-JFFS2             0x500E0000  0x500E0000  0x002E0000  0x00000000
-
-However Linux should display something like:
-
-SA1100 flash: probing 32-bit flash bus
-SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
-Using RedBoot partition definition
-Creating 5 MTD partitions on "SA1100 flash":
-0x00000000-0x00020000 : "RedBoot"
-0x00020000-0x000e0000 : "Linux kernel"
-0x000e0000-0x003c0000 : "JFFS2"
-0x003c0000-0x003e0000 : "RedBoot config"
-0x003e0000-0x00400000 : "FIS directory"
+displays them::
+
+	RedBoot> fis list
+	Name              FLASH addr  Mem addr    Length      Entry point
+	RedBoot           0x50000000  0x50000000  0x00020000  0x00000000
+	RedBoot config    0x503C0000  0x503C0000  0x00020000  0x00000000
+	FIS directory     0x503E0000  0x503E0000  0x00020000  0x00000000
+	Linux kernel      0x50020000  0x00100000  0x000C0000  0x00000000
+	JFFS2             0x500E0000  0x500E0000  0x002E0000  0x00000000
+
+However Linux should display something like::
+
+	SA1100 flash: probing 32-bit flash bus
+	SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
+	Using RedBoot partition definition
+	Creating 5 MTD partitions on "SA1100 flash":
+	0x00000000-0x00020000 : "RedBoot"
+	0x00020000-0x000e0000 : "Linux kernel"
+	0x000e0000-0x003c0000 : "JFFS2"
+	0x003c0000-0x003e0000 : "RedBoot config"
+	0x003e0000-0x00400000 : "FIS directory"
 
 What's important here is the position of the partition we are interested in,
 which is the third one.  Within Linux, this correspond to /dev/mtdblock2.
 Therefore to boot Linux with the kernel and its root filesystem in flash, we
-need this RedBoot command:
+need this RedBoot command::
 
 	fis load "Linux kernel"
 	exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2"
@@ -218,21 +219,21 @@ time the Assabet is rebooted.  Therefore it's possible to automate the boot
 process using RedBoot's scripting capability.
 
 For example, I use this to boot Linux with both the kernel and the ramdisk
-images retrieved from a TFTP server on the network:
-
-RedBoot> fconfig
-Run script at boot: false true
-Boot script:
-Enter script, terminate with empty line
->> load zImage -r -b 0x100000
->> load ramdisk_ks.gz -r -b 0x800000
->> exec -b 0x100000 -l 0xc0000
->>
-Boot script timeout (1000ms resolution): 3
-Use BOOTP for network configuration: true
-GDB connection port: 9000
-Network debug at boot time: false
-Update RedBoot non-volatile configuration - are you sure (y/n)? y
+images retrieved from a TFTP server on the network::
+
+	RedBoot> fconfig
+	Run script at boot: false true
+	Boot script:
+	Enter script, terminate with empty line
+	>> load zImage -r -b 0x100000
+	>> load ramdisk_ks.gz -r -b 0x800000
+	>> exec -b 0x100000 -l 0xc0000
+	>>
+	Boot script timeout (1000ms resolution): 3
+	Use BOOTP for network configuration: true
+	GDB connection port: 9000
+	Network debug at boot time: false
+	Update RedBoot non-volatile configuration - are you sure (y/n)? y
 
 Then, rebooting the Assabet is just a matter of waiting for the login prompt.
 
@@ -240,6 +241,7 @@ Then, rebooting the Assabet is just a matter of waiting for the login prompt.
 
 Nicolas Pitre
 nico@fluxnic.net
+
 June 12, 2001
 
 
@@ -249,52 +251,51 @@ Status of peripherals in -rmk tree (updated 14/10/2001)
 Assabet:
  Serial ports:
   Radio:		TX, RX, CTS, DSR, DCD, RI
-   PM:			Not tested.
-  COM:			TX, RX, CTS, DSR, DCD, RTS, DTR, PM
-   PM:			Not tested.
-  I2C:			Implemented, not fully tested.
-  L3:			Fully tested, pass.
-   PM:			Not tested.
+   - PM:		Not tested.
+   - COM:		TX, RX, CTS, DSR, DCD, RTS, DTR, PM
+   - PM:		Not tested.
+   - I2C:		Implemented, not fully tested.
+   - L3:		Fully tested, pass.
+   - PM:		Not tested.
 
  Video:
-  LCD:			Fully tested.  PM
-			(LCD doesn't like being blanked with
-			 neponset connected)
-  Video out:		Not fully
+  - LCD:		Fully tested.  PM
+
+   (LCD doesn't like being blanked with neponset connected)
+
+  - Video out:		Not fully
 
  Audio:
   UDA1341:
-   Playback:		Fully tested, pass.
-   Record:		Implemented, not tested.
-   PM:			Not tested.
+  -  Playback:		Fully tested, pass.
+  -  Record:		Implemented, not tested.
+  -  PM:			Not tested.
 
   UCB1200:
-   Audio play:		Implemented, not heavily tested.
-   Audio rec:		Implemented, not heavily tested.
-   Telco audio play:	Implemented, not heavily tested.
-   Telco audio rec:	Implemented, not heavily tested.
-   POTS control:	No
-   Touchscreen:		Yes
-   PM:			Not tested.
+  -  Audio play:	Implemented, not heavily tested.
+  -  Audio rec:		Implemented, not heavily tested.
+  -  Telco audio play:	Implemented, not heavily tested.
+  -  Telco audio rec:	Implemented, not heavily tested.
+  -  POTS control:	No
+  -  Touchscreen:	Yes
+  -  PM:		Not tested.
 
  Other:
-  PCMCIA:
-   LPE:			Fully tested, pass.
-  USB:			No
-  IRDA:
-   SIR:			Fully tested, pass.
-   FIR:			Fully tested, pass.
-   PM:			Not tested.
+  - PCMCIA:
+  - LPE:		Fully tested, pass.
+  - USB:		No
+  - IRDA:
+  - SIR:		Fully tested, pass.
+  - FIR:		Fully tested, pass.
+  - PM:			Not tested.
 
 Neponset:
  Serial ports:
-  COM1,2:	TX, RX, CTS, DSR, DCD, RTS, DTR
-   PM:			Not tested.
-  USB:			Implemented, not heavily tested.
-  PCMCIA:		Implemented, not heavily tested.
-   PM:			Not tested.
-  CF:			Implemented, not heavily tested.
-   PM:			Not tested.
+  - COM1,2:		TX, RX, CTS, DSR, DCD, RTS, DTR
+  - PM:			Not tested.
+  - USB:		Implemented, not heavily tested.
+  - PCMCIA:		Implemented, not heavily tested.
+  - CF:			Implemented, not heavily tested.
+  - PM:			Not tested.
 
 More stuff can be found in the -np (Nicolas Pitre's) tree.
-
diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/sa1100/brutus.rst
index 6a3aa95e9bfd..e1a23bee6d44 100644
--- a/Documentation/arm/SA1100/Brutus
+++ b/Documentation/arm/sa1100/brutus.rst
@@ -1,9 +1,13 @@
-Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
+======
+Brutus
+======
+
+Brutus is an evaluation platform for the SA1100 manufactured by Intel.
 For more details, see:
 
 http://developer.intel.com
 
-To compile for Brutus, you must issue the following commands:
+To compile for Brutus, you must issue the following commands::
 
 	make brutus_config
 	make config
@@ -16,25 +20,23 @@ must be loaded at 0xc0008000 in Brutus's memory and execution started at
 entry.
 
 But prior to execute the kernel, a ramdisk image must also be loaded in
-memory.  Use memory address 0xd8000000 for this.  Note that the file 
+memory.  Use memory address 0xd8000000 for this.  Note that the file
 containing the (compressed) ramdisk image must not exceed 4 MB.
 
 Typically, you'll need angelboot to load the kernel.
-The following angelboot.opt file should be used:
-
------ begin angelboot.opt -----
-base 0xc0008000
-entry 0xc0008000
-r0 0x00000000
-r1 0x00000010
-device /dev/ttyS0
-options "9600 8N1"
-baud 115200
-otherfile ramdisk_img.gz
-otherbase 0xd8000000
------ end angelboot.opt -----
-
-Then load the kernel and ramdisk with:
+The following angelboot.opt file should be used::
+
+	base 0xc0008000
+	entry 0xc0008000
+	r0 0x00000000
+	r1 0x00000010
+	device /dev/ttyS0
+	options "9600 8N1"
+	baud 115200
+	otherfile ramdisk_img.gz
+	otherbase 0xd8000000
+
+Then load the kernel and ramdisk with::
 
 	angelboot -f angelboot.opt zImage
 
@@ -44,14 +46,16 @@ console is provided through the second Brutus serial port. To access it,
 you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow
 control.
 
-Currently supported:
+Currently supported
+===================
+
 	- RS232 serial ports
 	- audio output
 	- LCD screen
 	- keyboard
-	
-The actual Brutus support may not be complete without extra patches. 
-If such patches exist, they should be found from 
+
+The actual Brutus support may not be complete without extra patches.
+If such patches exist, they should be found from
 ftp.netwinder.org/users/n/nico.
 
 A full PCMCIA support is still missing, although it's possible to hack
@@ -63,4 +67,3 @@ Any contribution is welcome.
 Please send patches to nico@fluxnic.net
 
 Have Fun !
-
diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/sa1100/cerf.rst
index b3d845301ef1..7fa71b609bf9 100644
--- a/Documentation/arm/SA1100/CERF
+++ b/Documentation/arm/sa1100/cerf.rst
@@ -1,3 +1,7 @@
+==============
+CerfBoard/Cube
+==============
+
 *** The StrongARM version of the CerfBoard/Cube has been discontinued ***
 
 The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
@@ -9,7 +13,9 @@ Intrinsyc website, http://www.intrinsyc.com.
 This document describes the support in the Linux kernel for the
 Intrinsyc CerfBoard.
 
-Supported in this version:
+Supported in this version
+=========================
+
    - CompactFlash+ slot (select PCMCIA in General Setup and any options
      that may be required)
    - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
@@ -19,7 +25,7 @@ Supported in this version:
 In order to get this kernel onto your Cerf, you need a server that runs
 both BOOTP and TFTP. Detailed instructions should have come with your
 evaluation kit on how to use the bootloader. This series of commands
-will suffice:
+will suffice::
 
    make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
    make ARCH=arm CROSS_COMPILE=arm-linux- zImage
diff --git a/Documentation/arm/sa1100/freebird.rst b/Documentation/arm/sa1100/freebird.rst
new file mode 100644
index 000000000000..81043d0c6d64
--- /dev/null
+++ b/Documentation/arm/sa1100/freebird.rst
@@ -0,0 +1,25 @@
+========
+Freebird
+========
+
+Freebird-1.1 is produced by Legend(C), Inc.
+`http://web.archive.org/web/*/http://www.legend.com.cn`
+and software/linux maintained by Coventive(C), Inc.
+(http://www.coventive.com)
+
+Based on the Nicolas's strongarm kernel tree.
+
+Maintainer:
+
+Chester Kuo
+	- <chester@coventive.com>
+	- <chester@linux.org.tw>
+
+Author:
+
+- Tim wu <timwu@coventive.com>
+- CIH <cih@coventive.com>
+- Eric Peng <ericpeng@coventive.com>
+- Jeff Lee <jeff_lee@coventive.com>
+- Allen Cheng
+- Tony Liu <tonyliu@coventive.com>
diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/sa1100/graphicsclient.rst
index 867bb35943af..a73d61c3ce91 100644
--- a/Documentation/arm/SA1100/GraphicsClient
+++ b/Documentation/arm/sa1100/graphicsclient.rst
@@ -1,9 +1,11 @@
+=============================================
 ADS GraphicsClient Plus Single Board Computer
+=============================================
 
 For more details, contact Applied Data Systems or see
 http://www.applieddata.net/products.html
 
-The original Linux support for this product has been provided by 
+The original Linux support for this product has been provided by
 Nicolas Pitre <nico@fluxnic.net>. Continued development work by
 Woojung Huh <whuh@applieddata.net>
 
@@ -14,8 +16,8 @@ board supports MTD/JFFS, so you could also mount something on there.
 Use 'make graphicsclient_config' before any 'make config'.  This will set up
 defaults for GraphicsClient Plus support.
 
-The kernel zImage is linked to be loaded and executed at 0xc0200000.  
-Also the following registers should have the specified values upon entry:
+The kernel zImage is linked to be loaded and executed at 0xc0200000.
+Also the following registers should have the specified values upon entry::
 
 	r0 = 0
 	r1 = 29	(this is the GraphicsClient architecture number)
@@ -31,23 +33,21 @@ as outlined below.  In any case, if you're planning on deploying
 something en masse, you should probably get the newer board.
 
 If using Angel on the older boards, here is a typical angel.opt option file
-if the kernel is loaded through the Angel Debug Monitor:
-
------ begin angelboot.opt -----
-base 0xc0200000
-entry 0xc0200000
-r0 0x00000000
-r1 0x0000001d
-device /dev/ttyS1
-options "38400 8N1"
-baud 115200
-#otherfile ramdisk.gz
-#otherbase 0xc0800000
-exec minicom
------ end angelboot.opt -----
+if the kernel is loaded through the Angel Debug Monitor::
+
+	base 0xc0200000
+	entry 0xc0200000
+	r0 0x00000000
+	r1 0x0000001d
+	device /dev/ttyS1
+	options "38400 8N1"
+	baud 115200
+	#otherfile ramdisk.gz
+	#otherbase 0xc0800000
+	exec minicom
 
 Then the kernel (and ramdisk if otherfile/otherbase lines above are
-uncommented) would be loaded with:
+uncommented) would be loaded with::
 
 	angelboot -f angelboot.opt zImage
 
@@ -59,7 +59,9 @@ If any other bootloader is used, ensure it accomplish the same, especially
 for r0/r1 register values before jumping into the kernel.
 
 
-Supported peripherals:
+Supported peripherals
+=====================
+
 - SA1100 LCD frame buffer (8/16bpp...sort of)
 - on-board SMC 92C96 ethernet NIC
 - SA1100 serial port
@@ -74,11 +76,14 @@ Supported peripherals:
   See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
-To do:
+To do
+=====
+
 - UCB1200 audio with new ucb_generic layer
 - everything else!  :-)
 
-Notes:
+Notes
+=====
 
 - The flash on board is divided into 3 partitions.  mtd0 is where
   the ADS boot ROM and zImage is stored.  It's been marked as
@@ -95,4 +100,3 @@ Notes:
   fixed soon.
 
 Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!
-
diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/sa1100/graphicsmaster.rst
index 9145088a0ba2..e39892514f0c 100644
--- a/Documentation/arm/SA1100/GraphicsMaster
+++ b/Documentation/arm/sa1100/graphicsmaster.rst
@@ -1,4 +1,6 @@
+========================================
 ADS GraphicsMaster Single Board Computer
+========================================
 
 For more details, contact Applied Data Systems or see
 http://www.applieddata.net/products.html
@@ -15,7 +17,9 @@ The kernel zImage is linked to be loaded and executed at 0xc0400000.
 Linux can  be used with the ADS BootLoader that ships with the
 newer rev boards. See their documentation on how to load Linux.
 
-Supported peripherals:
+Supported peripherals
+=====================
+
 - SA1100 LCD frame buffer (8/16bpp...sort of)
 - SA1111 USB Master
 - on-board SMC 92C96 ethernet NIC
@@ -31,10 +35,13 @@ Supported peripherals:
   See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
-To do:
+To do
+=====
+
 - everything else!  :-)
 
-Notes:
+Notes
+=====
 
 - The flash on board is divided into 3 partitions.  mtd0 is where
   the zImage is stored.  It's been marked as read-only to keep you
diff --git a/Documentation/arm/SA1100/HUW_WEBPANEL b/Documentation/arm/sa1100/huw_webpanel.rst
index fd56b48d4833..1dc7ccb165f0 100644
--- a/Documentation/arm/SA1100/HUW_WEBPANEL
+++ b/Documentation/arm/sa1100/huw_webpanel.rst
@@ -1,9 +1,14 @@
+=======================
+Hoeft & Wessel Webpanel
+=======================
+
 The HUW_WEBPANEL is a product of the german company Hoeft & Wessel AG
 
 If you want more information, please visit
 http://www.hoeft-wessel.de
 
-To build the kernel:
+To build the kernel::
+
 	make huw_webpanel_config
 	make oldconfig
 	[accept all defaults]
@@ -14,4 +19,3 @@ Roman Jordan         jor@hoeft-wessel.de
 Christoph Schulz    schu@hoeft-wessel.de
 
 2000/12/18/
-
diff --git a/Documentation/arm/sa1100/index.rst b/Documentation/arm/sa1100/index.rst
new file mode 100644
index 000000000000..68c2a280a745
--- /dev/null
+++ b/Documentation/arm/sa1100/index.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Intel StrongARM 1100
+====================
+
+.. toctree::
+    :maxdepth: 1
+
+    adsbitsy
+    assabet
+    brutus
+    cerf
+    freebird
+    graphicsclient
+    graphicsmaster
+    huw_webpanel
+    itsy
+    lart
+    nanoengine
+    pangolin
+    pleb
+    serial_uart
+    tifon
+    yopy
diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/sa1100/itsy.rst
index 44b94997fa0d..f49896ba3ef1 100644
--- a/Documentation/arm/SA1100/Itsy
+++ b/Documentation/arm/sa1100/itsy.rst
@@ -1,3 +1,7 @@
+====
+Itsy
+====
+
 Itsy is a research project done by the Western Research Lab, and Systems
 Research Center in Palo Alto, CA. The Itsy project is one of several
 research projects at Compaq that are related to pocket computing.
@@ -7,6 +11,7 @@ For more information, see:
 	http://www.hpl.hp.com/downloads/crl/itsy/
 
 Notes on initial 2.4 Itsy support (8/27/2000) :
+
 The port was done on an Itsy version 1.5 machine with a daughtercard with
 64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for
 serial console (to see what you're doing).  No other devices have been
@@ -18,8 +23,10 @@ Finally, you will need to cd to arch/arm/boot/tools and execute a make there
 to build the params-itsy program used to boot the kernel.
 
 In order to install the port of 2.4 to the itsy, You will need to set the
-configuration parameters in the monitor as follows:
-Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0
+configuration parameters in the monitor as follows::
+
+	Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0
+
 Make sure the start-routine address is set to 0x00060000.
 
 Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the
@@ -29,7 +36,8 @@ flash menu)  Flash the kernel in arch/arm/boot/zImage into 0x08340000
 handhelds.org.
 
 The serial connection we established was at:
- 8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the
+
+8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the
 params-itsy program, and in the kernel itself.  This can be changed, but
 not easily. The monitor parameters are easily changed, the params program
 setup is assembly outl's, and the kernel is a configuration item specific to
diff --git a/Documentation/arm/SA1100/LART b/Documentation/arm/sa1100/lart.rst
index 6d412b685598..94c0568d1095 100644
--- a/Documentation/arm/SA1100/LART
+++ b/Documentation/arm/sa1100/lart.rst
@@ -1,5 +1,6 @@
+====================================
 Linux Advanced Radio Terminal (LART)
-------------------------------------
+====================================
 
 The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded
 applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all
diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/sa1100/nanoengine.rst
index 48a7934f95f6..47f1a14cf98a 100644
--- a/Documentation/arm/SA1100/nanoEngine
+++ b/Documentation/arm/sa1100/nanoengine.rst
@@ -1,11 +1,11 @@
+==========
 nanoEngine
-----------
+==========
 
-"nanoEngine" is a SA1110 based single board computer from 
+"nanoEngine" is a SA1110 based single board computer from
 Bright Star Engineering Inc.  See www.brightstareng.com/arm
 for more info.
 (Ref: Stuart Adams <sja@brightstareng.com>)
 
 Also visit Larry Doolittle's "Linux for the nanoEngine" site:
 http://www.brightstareng.com/arm/nanoeng.htm
-
diff --git a/Documentation/arm/SA1100/Pangolin b/Documentation/arm/sa1100/pangolin.rst
index 077a6120e129..f0c5c1618553 100644
--- a/Documentation/arm/SA1100/Pangolin
+++ b/Documentation/arm/sa1100/pangolin.rst
@@ -1,16 +1,22 @@
+========
+Pangolin
+========
+
 Pangolin is a StrongARM 1110-based evaluation platform produced
 by Dialogue Technology (http://www.dialogue.com.tw/).
 It has EISA slots for ease of configuration with SDRAM/Flash
 memory card, USB/Serial/Audio card, Compact Flash card,
 PCMCIA/IDE card and TFT-LCD card.
 
-To compile for Pangolin, you must issue the following commands:
+To compile for Pangolin, you must issue the following commands::
 
 	make pangolin_config
 	make oldconfig
 	make zImage
 
-Supported peripherals:
+Supported peripherals
+=====================
+
 - SA1110 serial port (UART1/UART2/UART3)
 - flash memory access
 - compact flash driver
diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/sa1100/pleb.rst
index b9c8a631a351..d5b732967aa3 100644
--- a/Documentation/arm/SA1100/PLEB
+++ b/Documentation/arm/sa1100/pleb.rst
@@ -1,3 +1,7 @@
+====
+PLEB
+====
+
 The PLEB project was started as a student initiative at the School of
 Computer Science and Engineering, University of New South Wales to make a
 pocket computer capable of running the Linux Kernel.
@@ -7,5 +11,3 @@ PLEB support has yet to be fully integrated.
 For more information, see:
 
 	http://www.cse.unsw.edu.au
-
-
diff --git a/Documentation/arm/sa1100/serial_uart.rst b/Documentation/arm/sa1100/serial_uart.rst
new file mode 100644
index 000000000000..ea983642b9be
--- /dev/null
+++ b/Documentation/arm/sa1100/serial_uart.rst
@@ -0,0 +1,51 @@
+==================
+SA1100 serial port
+==================
+
+The SA1100 serial port had its major/minor numbers officially assigned::
+
+  > Date: Sun, 24 Sep 2000 21:40:27 -0700
+  > From: H. Peter Anvin <hpa@transmeta.com>
+  > To: Nicolas Pitre <nico@CAM.ORG>
+  > Cc: Device List Maintainer <device@lanana.org>
+  > Subject: Re: device
+  >
+  > Okay.  Note that device numbers 204 and 205 are used for "low density
+  > serial devices", so you will have a range of minors on those majors (the
+  > tty device layer handles this just fine, so you don't have to worry about
+  > doing anything special.)
+  >
+  > So your assignments are:
+  >
+  > 204 char        Low-density serial ports
+  >                   5 = /dev/ttySA0               SA1100 builtin serial port 0
+  >                   6 = /dev/ttySA1               SA1100 builtin serial port 1
+  >                   7 = /dev/ttySA2               SA1100 builtin serial port 2
+  >
+  > 205 char        Low-density serial ports (alternate device)
+  >                   5 = /dev/cusa0                Callout device for ttySA0
+  >                   6 = /dev/cusa1                Callout device for ttySA1
+  >                   7 = /dev/cusa2                Callout device for ttySA2
+  >
+
+You must create those inodes in /dev on the root filesystem used
+by your SA1100-based device::
+
+	mknod ttySA0 c 204 5
+	mknod ttySA1 c 204 6
+	mknod ttySA2 c 204 7
+	mknod cusa0 c 205 5
+	mknod cusa1 c 205 6
+	mknod cusa2 c 205 7
+
+In addition to the creation of the appropriate device nodes above, you
+must ensure your user space applications make use of the correct device
+name. The classic example is the content of the /etc/inittab file where
+you might have a getty process started on ttyS0.
+
+In this case:
+
+- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
+
+- don't forget to add 'ttySA0', 'console', or the appropriate tty name
+  in /etc/securetty for root to be allowed to login as well.
diff --git a/Documentation/arm/SA1100/Tifon b/Documentation/arm/sa1100/tifon.rst
index dd1934d9c851..c26e910b9ea7 100644
--- a/Documentation/arm/SA1100/Tifon
+++ b/Documentation/arm/sa1100/tifon.rst
@@ -1,7 +1,7 @@
+=====
 Tifon
------
+=====
 
 More info has to come...
 
 Contact: Peter Danielsson <peter.danielsson@era-t.ericsson.se>
-
diff --git a/Documentation/arm/SA1100/Yopy b/Documentation/arm/sa1100/yopy.rst
index e14f16d836ac..5b35a5f61a44 100644
--- a/Documentation/arm/SA1100/Yopy
+++ b/Documentation/arm/sa1100/yopy.rst
@@ -1,2 +1,5 @@
-See http://www.yopydeveloper.org for more.
+====
+Yopy
+====
 
+See http://www.yopydeveloper.org for more.
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
index fa968aa99d67..2ddc26c03b1f 100644
--- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
+++ b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
@@ -1,5 +1,6 @@
-		S3C24XX CPUfreq support
-		=======================
+=======================
+S3C24XX CPUfreq support
+=======================
 
 Introduction
 ------------
diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
index b87292e05f2f..7863c93652f8 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
@@ -1,5 +1,6 @@
-		Simtec Electronics EB2410ITX (BAST)
-		===================================
+===================================
+Simtec Electronics EB2410ITX (BAST)
+===================================
 
 	http://www.simtec.co.uk/products/EB2410ITX/
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/samsung-s3c24xx/gpio.rst
index e8f918b96123..f7c3d7d011a2 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/samsung-s3c24xx/gpio.rst
@@ -1,5 +1,6 @@
-			S3C24XX GPIO Control
-			====================
+====================
+S3C24XX GPIO Control
+====================
 
 Introduction
 ------------
@@ -12,7 +13,7 @@ Introduction
   of the s3c2410 GPIO system, please read the Samsung provided
   data-sheet/users manual to find out the complete list.
 
-  See Documentation/arm/Samsung/GPIO.txt for the core implementation.
+  See Documentation/arm/samsung/gpio.rst for the core implementation.
 
 
 GPIOLIB
@@ -26,16 +27,16 @@ GPIOLIB
   listed below will be removed (they may be marked as __deprecated
   in the near future).
 
-  The following functions now either have a s3c_ specific variant
+  The following functions now either have a `s3c_` specific variant
   or are merged into gpiolib. See the definitions in
   arch/arm/plat-samsung/include/plat/gpio-cfg.h:
 
-  s3c2410_gpio_setpin()		gpio_set_value() or gpio_direction_output()
-  s3c2410_gpio_getpin()		gpio_get_value() or gpio_direction_input()
-  s3c2410_gpio_getirq()		gpio_to_irq()
-  s3c2410_gpio_cfgpin()		s3c_gpio_cfgpin()
-  s3c2410_gpio_getcfg()		s3c_gpio_getcfg()
-  s3c2410_gpio_pullup()		s3c_gpio_setpull()
+  - s3c2410_gpio_setpin()	gpio_set_value() or gpio_direction_output()
+  - s3c2410_gpio_getpin()	gpio_get_value() or gpio_direction_input()
+  - s3c2410_gpio_getirq()	gpio_to_irq()
+  - s3c2410_gpio_cfgpin()	s3c_gpio_cfgpin()
+  - s3c2410_gpio_getcfg()	s3c_gpio_getcfg()
+  - s3c2410_gpio_pullup()	s3c_gpio_setpull()
 
 
 GPIOLIB conversion
@@ -77,7 +78,7 @@ out s3c2410 API, then here are some notes on the process.
 6) s3c2410_gpio_getirq() should be directly replaceable with the
    gpio_to_irq() call.
 
-The s3c2410_gpio and gpio_ calls have always operated on the same gpio
+The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
 numberspace, so there is no problem with converting the gpio numbering
 between the calls.
 
diff --git a/Documentation/arm/Samsung-S3C24XX/H1940.txt b/Documentation/arm/samsung-s3c24xx/h1940.rst
index b738859b1fc0..62a562c178e3 100644
--- a/Documentation/arm/Samsung-S3C24XX/H1940.txt
+++ b/Documentation/arm/samsung-s3c24xx/h1940.rst
@@ -1,5 +1,6 @@
-		HP IPAQ H1940
-		=============
+=============
+HP IPAQ H1940
+=============
 
 http://www.handhelds.org/projects/h1940.html
 
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
new file mode 100644
index 000000000000..5b8a7f9398d8
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Samsung S3C24XX SoC Family
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   h1940
+   gpio
+   cpufreq
+   suspend
+   usb-host
+   s3c2412
+   eb2410itx
+   nand
+   smdk2440
+   s3c2413
+   overview
diff --git a/Documentation/arm/Samsung-S3C24XX/NAND.txt b/Documentation/arm/samsung-s3c24xx/nand.rst
index bc478a3409b8..938995694ee7 100644
--- a/Documentation/arm/Samsung-S3C24XX/NAND.txt
+++ b/Documentation/arm/samsung-s3c24xx/nand.rst
@@ -1,5 +1,6 @@
-			S3C24XX NAND Support
-			====================
+====================
+S3C24XX NAND Support
+====================
 
 Introduction
 ------------
@@ -27,4 +28,3 @@ Document Author
 ---------------
 
 Ben Dooks, Copyright 2007 Simtec Electronics
-
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/samsung-s3c24xx/overview.rst
index 00d3c3141e21..e9a1dc7276b5 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/samsung-s3c24xx/overview.rst
@@ -1,5 +1,6 @@
-			S3C24XX ARM Linux Overview
-			==========================
+==========================
+S3C24XX ARM Linux Overview
+==========================
 
 
 
@@ -182,7 +183,7 @@ NAND
   controller. If there are any problems the latest linux-mtd
   code can be found from http://www.linux-mtd.infradead.org/
 
-  For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
+  For more information see Documentation/arm/samsung-s3c24xx/nand.rst
 
 
 SD/MMC
@@ -221,8 +222,8 @@ GPIO
   As of v2.6.34, the move towards using gpiolib support is almost
   complete, and very little of the old calls are left.
 
-  See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
-  support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
+  See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
+  support and Documentation/arm/samsung/gpio.rst for the core Samsung
   implementation.
 
 
@@ -276,18 +277,18 @@ Platform Data
        kmalloc()s an area of memory, and copies the __initdata
        and then sets the relevant device's platform data. Making
        the function `__init` takes care of ensuring it is discarded
-       with the rest of the initialisation code
+       with the rest of the initialisation code::
 
-       static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
-       {
-           struct s3c2410_xxx_mach_info *npd;
+         static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
+         {
+             struct s3c2410_xxx_mach_info *npd;
 
 	   npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
 	   if (npd) {
 	      memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
 	      s3c_device_xxx.dev.platform_data = npd;
 	   } else {
-              printk(KERN_ERR "no memory for xxx platform data\n");
+                printk(KERN_ERR "no memory for xxx platform data\n");
 	   }
 	}
 
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
index dc1fd362d3c1..68b985fc6bf4 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
@@ -1,5 +1,6 @@
-		S3C2412 ARM Linux Overview
-		==========================
+==========================
+S3C2412 ARM Linux Overview
+==========================
 
 Introduction
 ------------
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
index 909bdc7dd7b5..1f51e207fc46 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
+++ b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
@@ -1,5 +1,6 @@
-		S3C2413 ARM Linux Overview
-		==========================
+==========================
+S3C2413 ARM Linux Overview
+==========================
 
 Introduction
 ------------
@@ -10,7 +11,7 @@ Introduction
 
 
 Camera Interface
----------------
+----------------
 
   This block is currently not supported.
 
diff --git a/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
index 429390bd4684..524fd0b4afaf 100644
--- a/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt
+++ b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
@@ -1,5 +1,6 @@
-		Samsung/Meritech SMDK2440
-		=========================
+=========================
+Samsung/Meritech SMDK2440
+=========================
 
 Introduction
 ------------
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/samsung-s3c24xx/suspend.rst
index cb4f0c0cdf9d..b4f3ae9fe76e 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/samsung-s3c24xx/suspend.rst
@@ -1,5 +1,6 @@
-			S3C24XX Suspend Support
-			=======================
+=======================
+S3C24XX Suspend Support
+=======================
 
 
 Introduction
@@ -57,16 +58,16 @@ Machine Support
   and will end up initialising all compiled machines' pm init!
 
   The following is an example of code used for testing wakeup from
-  an falling edge on IRQ_EINT0:
+  an falling edge on IRQ_EINT0::
 
 
-static irqreturn_t button_irq(int irq, void *pw)
-{
+    static irqreturn_t button_irq(int irq, void *pw)
+    {
 	return IRQ_HANDLED;
-}
+    }
 
-statuc void __init machine_init(void)
-{
+    statuc void __init machine_init(void)
+    {
 	...
 
 	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
@@ -75,7 +76,7 @@ statuc void __init machine_init(void)
 	enable_irq_wake(IRQ_EINT0);
 
 	s3c_pm_init();
-}
+    }
 
 
 Debugging
@@ -134,4 +135,3 @@ Document Author
 ---------------
 
 Ben Dooks, Copyright 2004 Simtec Electronics
-
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/samsung-s3c24xx/usb-host.rst
index f82b1faefad5..c84268bd1884 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/samsung-s3c24xx/usb-host.rst
@@ -1,5 +1,6 @@
-			S3C24XX USB Host support
-			========================
+========================
+S3C24XX USB Host support
+========================
 
 
 
@@ -13,7 +14,7 @@ Configuration
 
   Enable at least the following kernel options:
 
-  menuconfig:
+  menuconfig::
 
    Device Drivers  --->
      USB support  --->
@@ -22,8 +23,9 @@ Configuration
 
 
   .config:
-    CONFIG_USB
-    CONFIG_USB_OHCI_HCD
+
+    - CONFIG_USB
+    - CONFIG_USB_OHCI_HCD
 
 
   Once these options are configured, the standard set of USB device
@@ -60,17 +62,14 @@ Platform Data
   The ports are numbered 0 and 1.
 
   power_control:
-
     Called to enable or disable the power on the port.
 
   enable_oc:
-
     Called to enable or disable the over-current monitoring.
     This should claim or release the resources being used to
     check the power condition on the port, such as an IRQ.
 
   report_oc:
-
     The OHCI driver fills this field in for the over-current code
     to call when there is a change to the over-current state on
     an port. The ports argument is a bitmask of 1 bit per port,
@@ -80,7 +79,6 @@ Platform Data
     ensure this is called correctly.
 
   port[x]:
-
     This is struct describes each port, 0 or 1. The platform driver
     should set the flags field of each port to S3C_HCDFLG_USED if
     the port is enabled.
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/samsung/bootloader-interface.rst
index d17ed518a7ea..a56f325dae78 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/samsung/bootloader-interface.rst
@@ -1,7 +1,9 @@
-      Interface between kernel and boot loaders on Exynos boards
-      ==========================================================
+==========================================================
+Interface between kernel and boot loaders on Exynos boards
+==========================================================
 
 Author: Krzysztof Kozlowski
+
 Date  : 6 June 2015
 
 The document tries to describe currently used interface between Linux kernel
@@ -17,8 +19,10 @@ executing kernel.
 1. Non-Secure mode
 
 Address:      sysram_ns_base_addr
+
+============= ============================================ ==================
 Offset        Value                                        Purpose
-=============================================================================
+============= ============================================ ==================
 0x08          exynos_cpu_resume_ns, mcpm_entry_point       System suspend
 0x0c          0x00000bad (Magic cookie)                    System suspend
 0x1c          exynos4_secondary_startup                    Secondary CPU boot
@@ -27,22 +31,28 @@ Offset        Value                                        Purpose
 0x24          exynos_cpu_resume_ns                         AFTR
 0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
 0x28          0x0 or last value during resume (Exynos542x) System suspend
+============= ============================================ ==================
 
 
 2. Secure mode
 
 Address:      sysram_base_addr
+
+============= ============================================ ==================
 Offset        Value                                        Purpose
-=============================================================================
+============= ============================================ ==================
 0x00          exynos4_secondary_startup                    Secondary CPU boot
 0x04          exynos4_secondary_startup (Exynos542x)       Secondary CPU boot
 4*cpu         exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
 0x20          exynos_cpu_resume (Exynos4210 r1.0)          AFTR
 0x24          0xfcba0d10 (Magic cookie, Exynos4210 r1.0)   AFTR
+============= ============================================ ==================
 
 Address:      pmu_base_addr
+
+============= ============================================ ==================
 Offset        Value                                        Purpose
-=============================================================================
+============= ============================================ ==================
 0x0800        exynos_cpu_resume                            AFTR, suspend
 0x0800        mcpm_entry_point (Exynos542x with MCPM)      AFTR, suspend
 0x0804        0xfcba0d10 (Magic cookie)                    AFTR
@@ -50,15 +60,18 @@ Offset        Value                                        Purpose
 0x0814        exynos4_secondary_startup (Exynos4210 r1.1)  Secondary CPU boot
 0x0818        0xfcba0d10 (Magic cookie, Exynos4210 r1.1)   AFTR
 0x081C        exynos_cpu_resume (Exynos4210 r1.1)          AFTR
-
+============= ============================================ ==================
 
 3. Other (regardless of secure/non-secure mode)
 
 Address:      pmu_base_addr
+
+============= =============================== ===============================
 Offset        Value                           Purpose
-=============================================================================
+============= =============================== ===============================
 0x0908        Non-zero                        Secondary CPU boot up indicator
                                               on Exynos3250 and Exynos542x
+============= =============================== ===============================
 
 
 4. Glossary
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/samsung/clksrc-change-registers.awk
index 7be1b8aa7cd9..7be1b8aa7cd9 100755
--- a/Documentation/arm/Samsung/clksrc-change-registers.awk
+++ b/Documentation/arm/samsung/clksrc-change-registers.awk
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/samsung/gpio.rst
index 795adfd88081..5f7cadd7159e 100644
--- a/Documentation/arm/Samsung/GPIO.txt
+++ b/Documentation/arm/samsung/gpio.rst
@@ -1,5 +1,6 @@
-		Samsung GPIO implementation
-		===========================
+===========================
+Samsung GPIO implementation
+===========================
 
 Introduction
 ------------
@@ -11,7 +12,7 @@ specific calls provided alongside the drivers/gpio core.
 S3C24XX (Legacy)
 ----------------
 
-See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
+See Documentation/arm/samsung-s3c24xx/gpio.rst for more information
 about these devices. Their implementation has been brought into line
 with the core samsung implementation described in this document.
 
diff --git a/Documentation/arm/samsung/index.rst b/Documentation/arm/samsung/index.rst
new file mode 100644
index 000000000000..8142cce3d23e
--- /dev/null
+++ b/Documentation/arm/samsung/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+Samsung SoC
+===========
+
+.. toctree::
+   :maxdepth: 1
+
+   gpio
+   bootloader-interface
+   overview
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/samsung/overview.rst
index 8f7309bad460..e74307897416 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/samsung/overview.rst
@@ -1,5 +1,6 @@
-		Samsung ARM Linux Overview
-		==========================
+==========================
+Samsung ARM Linux Overview
+==========================
 
 Introduction
 ------------
@@ -11,7 +12,7 @@ Introduction
 
   The currently supported SoCs are:
 
-  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
   - S3C64XX: S3C6400 and S3C6410
   - S5PC110 / S5PV210
 
@@ -22,7 +23,7 @@ S3C24XX Systems
   There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
   deals with the architecture and drivers specific to these devices.
 
-  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  See Documentation/arm/samsung-s3c24xx/overview.rst for more information
   on the implementation details and specific support.
 
 
@@ -32,8 +33,10 @@ Configuration
   A number of configurations are supplied, as there is no current way of
   unifying all the SoCs into one kernel.
 
-  s5pc110_defconfig - S5PC110 specific default configuration
-  s5pv210_defconfig - S5PV210 specific default configuration
+  s5pc110_defconfig
+	- S5PC110 specific default configuration
+  s5pv210_defconfig
+	- S5PV210 specific default configuration
 
 
 Layout
diff --git a/Documentation/arm/Setup b/Documentation/arm/setup.rst
index 0cb1e64bde80..8e12ef3fb9a7 100644
--- a/Documentation/arm/Setup
+++ b/Documentation/arm/setup.rst
@@ -1,5 +1,6 @@
+=============================================
 Kernel initialisation parameters on ARM Linux
----------------------------------------------
+=============================================
 
 The following document describes the kernel initialisation parameter
 structure, otherwise known as 'struct param_struct' which is used
@@ -14,12 +15,10 @@ There are a lot of parameters listed in there, and they are described
 below:
 
  page_size
-
    This parameter must be set to the page size of the machine, and
    will be checked by the kernel.
 
  nr_pages
-
    This is the total number of pages of memory in the system.  If
    the memory is banked, then this should contain the total number
    of pages in the system.
@@ -28,24 +27,22 @@ below:
    include this information.
 
  ramdisk_size
-
    This is now obsolete, and should not be used.
 
  flags
-
    Various kernel flags, including:
-    bit 0 - 1 = mount root read only
-    bit 1 - unused
-    bit 2 - 0 = load ramdisk
-    bit 3 - 0 = prompt for ramdisk
 
- rootdev
+    =====   ========================
+    bit 0   1 = mount root read only
+    bit 1   unused
+    bit 2   0 = load ramdisk
+    bit 3   0 = prompt for ramdisk
+    =====   ========================
 
+ rootdev
    major/minor number pair of device to mount as the root filesystem.
 
- video_num_cols
- video_num_rows
-
+ video_num_cols / video_num_rows
    These two together describe the character size of the dummy console,
    or VGA console character size.  They should not be used for any other
    purpose.
@@ -54,66 +51,50 @@ below:
    the equivalent character size of your fbcon display.  This then allows
    all the bootup messages to be displayed correctly.
 
- video_x
- video_y
-
+ video_x / video_y
    This describes the character position of cursor on VGA console, and
    is otherwise unused. (should not be used for other console types, and
    should not be used for other purposes).
 
  memc_control_reg
-
    MEMC chip control register for Acorn Archimedes and Acorn A5000
    based machines.  May be used differently by different architectures.
 
  sounddefault
-
    Default sound setting on Acorn machines.  May be used differently by
    different architectures.
 
  adfsdrives
-
    Number of ADFS/MFM disks.  May be used differently by different
    architectures.
 
- bytes_per_char_h
- bytes_per_char_v
-
+ bytes_per_char_h / bytes_per_char_v
    These are now obsolete, and should not be used.
 
  pages_in_bank[4]
-
    Number of pages in each bank of the systems memory (used for RiscPC).
    This is intended to be used on systems where the physical memory
    is non-contiguous from the processors point of view.
 
  pages_in_vram
-
    Number of pages in VRAM (used on Acorn RiscPC).  This value may also
    be used by loaders if the size of the video RAM can't be obtained
    from the hardware.
 
- initrd_start
- initrd_size
-
+ initrd_start / initrd_size
    This describes the kernel virtual start address and size of the
    initial ramdisk.
 
  rd_start
-
    Start address in sectors of the ramdisk image on a floppy disk.
 
  system_rev
-
    system revision number.
 
- system_serial_low
- system_serial_high
-
+ system_serial_low / system_serial_high
    system 64-bit serial number
 
  mem_fclk_21285
-
    The speed of the external oscillator to the 21285 (footbridge),
    which control's the speed of the memory bus, timer & serial port.
    Depending upon the speed of the cpu its value can be between
@@ -121,9 +102,7 @@ below:
    then a value of 50 Mhz is the default on 21285 architectures.
 
  paths[8][128]
-
    These are now obsolete, and should not be used.
 
  commandline
-
    Kernel command line parameters.  Details can be found elsewhere.
diff --git a/Documentation/arm/SH-Mobile/.gitignore b/Documentation/arm/sh-mobile/.gitignore
index c928dbf3cc88..c928dbf3cc88 100644
--- a/Documentation/arm/SH-Mobile/.gitignore
+++ b/Documentation/arm/sh-mobile/.gitignore
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/spear/overview.rst
index 1b049be6c84f..1a77f6b213b6 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/spear/overview.rst
@@ -1,5 +1,6 @@
-			SPEAr ARM Linux Overview
-			==========================
+========================
+SPEAr ARM Linux Overview
+========================
 
 Introduction
 ------------
@@ -14,6 +15,7 @@ Introduction
   Hierarchy in SPEAr is as follows:
 
   SPEAr (Platform)
+
 	- SPEAr3XX (3XX SOC series, based on ARM9)
 		- SPEAr300 (SOC)
 			- SPEAr300 Evaluation Board
@@ -30,17 +32,18 @@ Introduction
 		- SPEAr1340 (SOC)
 			- SPEAr1340 Evaluation Board
 
-  Configuration
-  -------------
+Configuration
+-------------
 
   A generic configuration is provided for each machine, and can be used as the
-  default by
+  default by::
+
 	make spear13xx_defconfig
 	make spear3xx_defconfig
 	make spear6xx_defconfig
 
-  Layout
-  ------
+Layout
+------
 
   The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
   SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
@@ -57,7 +60,7 @@ Introduction
   support Flattened Device Tree.
 
 
-  Document Author
-  ---------------
+Document Author
+---------------
 
   Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/arm/sti/overview.txt b/Documentation/arm/sti/overview.rst
index 1a4e93d6027f..70743617a74f 100644
--- a/Documentation/arm/sti/overview.txt
+++ b/Documentation/arm/sti/overview.rst
@@ -1,5 +1,6 @@
-			STi ARM Linux Overview
-			==========================
+======================
+STi ARM Linux Overview
+======================
 
 Introduction
 ------------
@@ -10,15 +11,17 @@ Introduction
   B2000 and B2020 Reference boards.
 
 
-  configuration
-  -------------
+configuration
+-------------
 
   A generic configuration is provided for both STiH415/416, and can be used as the
-  default by
+  default by::
+
 	make stih41x_defconfig
 
-  Layout
-  ------
+Layout
+------
+
   All the files for multiple machine families (STiH415, STiH416, and STiG125)
   are located in the platform code contained in arch/arm/mach-sti
 
@@ -27,7 +30,7 @@ Introduction
   Device Trees.
 
 
-  Document Author
-  ---------------
+Document Author
+---------------
 
   Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arm/sti/stih407-overview.txt b/Documentation/arm/sti/stih407-overview.rst
index 3343f32f58bc..027e75bc7b7c 100644
--- a/Documentation/arm/sti/stih407-overview.txt
+++ b/Documentation/arm/sti/stih407-overview.rst
@@ -1,5 +1,6 @@
-			STiH407 Overview
-			================
+================
+STiH407 Overview
+================
 
 Introduction
 ------------
@@ -12,7 +13,7 @@ Introduction
     - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
     - SATA2, USB 3.0, PCIe, Gbit Ethernet
 
-  Document Author
-  ---------------
+Document Author
+---------------
 
   Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/arm/sti/stih415-overview.txt b/Documentation/arm/sti/stih415-overview.rst
index 1383e33f265d..b67452d610c4 100644
--- a/Documentation/arm/sti/stih415-overview.txt
+++ b/Documentation/arm/sti/stih415-overview.rst
@@ -1,5 +1,6 @@
-			STiH415 Overview
-			================
+================
+STiH415 Overview
+================
 
 Introduction
 ------------
@@ -7,6 +8,7 @@ Introduction
     The STiH415 is the next generation of HD, AVC set-top box processors
     for satellite, cable, terrestrial and IP-STB markets.
 
-    Features
+    Features:
+
     - ARM Cortex-A9 1.0 GHz, dual-core CPU
     - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/sti/stih416-overview.txt b/Documentation/arm/sti/stih416-overview.rst
index 558444c201c6..93f17d74d8db 100644
--- a/Documentation/arm/sti/stih416-overview.txt
+++ b/Documentation/arm/sti/stih416-overview.rst
@@ -1,5 +1,6 @@
-			STiH416 Overview
-			================
+================
+STiH416 Overview
+================
 
 Introduction
 ------------
diff --git a/Documentation/arm/sti/stih418-overview.txt b/Documentation/arm/sti/stih418-overview.rst
index 1cd8fc80646d..b563c1f4fe5a 100644
--- a/Documentation/arm/sti/stih418-overview.txt
+++ b/Documentation/arm/sti/stih418-overview.rst
@@ -1,5 +1,6 @@
-			STiH418 Overview
-			================
+================
+STiH418 Overview
+================
 
 Introduction
 ------------
@@ -14,7 +15,7 @@ Introduction
     - HEVC L5.1 Main 10
     - VP9
 
-  Document Author
-  ---------------
+Document Author
+---------------
 
   Maxime Coquelin <maxime.coquelin@st.com>, (c) 2015 ST Microelectronics
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
index f7e734153860..85cfc8410798 100644
--- a/Documentation/arm/stm32/overview.rst
+++ b/Documentation/arm/stm32/overview.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ========================
 STM32 ARM Linux Overview
 ========================
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
index 65bbb1c3b423..a7ebe8ea6697 100644
--- a/Documentation/arm/stm32/stm32f429-overview.rst
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -1,5 +1,4 @@
-:orphan:
-
+==================
 STM32F429 Overview
 ==================
 
@@ -23,6 +22,4 @@ Datasheet and reference manual are publicly available on ST website (STM32F429_)
 
 .. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
 
-:Authors:
-
-Maxime Coquelin <mcoquelin.stm32@gmail.com>
+:Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
index 42d593085015..78befddc7740 100644
--- a/Documentation/arm/stm32/stm32f746-overview.rst
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -1,5 +1,4 @@
-:orphan:
-
+==================
 STM32F746 Overview
 ==================
 
@@ -30,6 +29,4 @@ Datasheet and reference manual are publicly available on ST website (STM32F746_)
 
 .. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
 
-:Authors:
-
-Alexandre Torgue <alexandre.torgue@st.com>
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
index f6adac862b17..e482980ddf21 100644
--- a/Documentation/arm/stm32/stm32f769-overview.rst
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -1,5 +1,4 @@
-:orphan:
-
+==================
 STM32F769 Overview
 ==================
 
@@ -32,6 +31,4 @@ Datasheet and reference manual are publicly available on ST website (STM32F769_)
 
 .. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
 
-:Authors:
-
-Alexandre Torgue <alexandre.torgue@st.com>
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
index c525835e7473..4e15f1a42730 100644
--- a/Documentation/arm/stm32/stm32h743-overview.rst
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -1,5 +1,4 @@
-:orphan:
-
+==================
 STM32H743 Overview
 ==================
 
@@ -31,6 +30,4 @@ Datasheet and reference manual are publicly available on ST website (STM32H743_)
 
 .. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
 
-:Authors:
-
-Alexandre Torgue <alexandre.torgue@st.com>
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
index 2c52cd020601..f62fdc8e7d8d 100644
--- a/Documentation/arm/stm32/stm32mp157-overview.rst
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -1,5 +1,4 @@
-:orphan:
-
+===================
 STM32MP157 Overview
 ===================
 
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi.rst
index f8efc21998bf..b037428aee98 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi.rst
@@ -1,3 +1,4 @@
+==================
 ARM Allwinner SoCs
 ==================
 
@@ -10,93 +11,140 @@ SunXi family
   Linux kernel mach directory: arch/arm/mach-sunxi
 
   Flavors:
+
     * ARM926 based SoCs
       - Allwinner F20 (sun3i)
-        + Not Supported
+
+        * Not Supported
 
     * ARM Cortex-A8 based SoCs
       - Allwinner A10 (sun4i)
-        + Datasheet
+
+        * Datasheet
+
 	  http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
-	+ User Manual
+	* User Manual
+
 	  http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
 
       - Allwinner A10s (sun5i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
 
       - Allwinner A13 / R8 (sun5i)
-        + Datasheet
+
+        * Datasheet
+
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
-        + User Manual
+        * User Manual
+
           http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
 
       - Next Thing Co GR8 (sun5i)
 
     * Single ARM Cortex-A7 based SoCs
       - Allwinner V3s (sun8i)
-        + Datasheet
+
+        * Datasheet
+
           http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
 
     * Dual ARM Cortex-A7 based SoCs
       - Allwinner A20 (sun7i)
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
 
       - Allwinner A23 (sun8i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
 
     * Quad ARM Cortex-A7 based SoCs
       - Allwinner A31 (sun6i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
 
       - Allwinner A31s (sun6i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
 
       - Allwinner A33 (sun8i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
 
       - Allwinner H2+ (sun8i)
-        + No document available now, but is known to be working properly with
+
+        * No document available now, but is known to be working properly with
           H3 drivers and memory map.
 
       - Allwinner H3 (sun8i)
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
       - Allwinner R40 (sun8i)
-        + Datasheet
+
+        * Datasheet
+
           https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
-        + User Manual
+
+        * User Manual
+
           https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
 
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
-        + Datasheet
+
+        * Datasheet
+
 	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
 
     * Octa ARM Cortex-A7 based SoCs
       - Allwinner A83T
-        + Datasheet
+
+        * Datasheet
+
           https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
-        + User Manual
+
+        * User Manual
+
           https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
 
     * Quad ARM Cortex-A53 based SoCs
       - Allwinner A64
-        + Datasheet
+
+        * Datasheet
+
           http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
-        + User Manual
+
+        * User Manual
+
           http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
diff --git a/Documentation/arm/sunxi/clocks.txt b/Documentation/arm/sunxi/clocks.rst
index e09a88aa3136..23bd03f3e21f 100644
--- a/Documentation/arm/sunxi/clocks.txt
+++ b/Documentation/arm/sunxi/clocks.rst
@@ -1,3 +1,4 @@
+=======================================================
 Frequently asked questions about the sunxi clock system
 =======================================================
 
@@ -12,7 +13,7 @@ A: The 24MHz oscillator allows gating to save power. Indeed, if gated
    steps, one can gate it and keep the system running. Consider this
    simplified suspend example:
 
-   While the system is operational, you would see something like
+   While the system is operational, you would see something like::
 
       24MHz         32kHz
        |
@@ -23,7 +24,7 @@ A: The 24MHz oscillator allows gating to save power. Indeed, if gated
            [CPU]
 
    When you are about to suspend, you switch the CPU Mux to the 32kHz
-   oscillator:
+   oscillator::
 
       24Mhz         32kHz
        |              |
@@ -33,7 +34,7 @@ A: The 24MHz oscillator allows gating to save power. Indeed, if gated
              |
            [CPU]
 
-    Finally you can gate the main oscillator
+    Finally you can gate the main oscillator::
 
                     32kHz
                       |
diff --git a/Documentation/arm/swp_emulation b/Documentation/arm/swp_emulation.rst
index af903d22fd93..6a608a9c3715 100644
--- a/Documentation/arm/swp_emulation
+++ b/Documentation/arm/swp_emulation.rst
@@ -11,17 +11,17 @@ sequence. If a memory access fault (an abort) occurs, a segmentation fault is
 signalled to the triggering process.
 
 /proc/cpu/swp_emulation holds some statistics/information, including the PID of
-the last process to trigger the emulation to be invocated. For example:
----
-Emulated SWP:		12
-Emulated SWPB:		0
-Aborted SWP{B}:		1
-Last process:		314
----
+the last process to trigger the emulation to be invocated. For example::
 
-NOTE: when accessing uncached shared regions, LDREX/STREX rely on an external
-transaction monitoring block called a global monitor to maintain update
-atomicity. If your system does not implement a global monitor, this option can
-cause programs that perform SWP operations to uncached memory to deadlock, as
-the STREX operation will always fail.
+  Emulated SWP:		12
+  Emulated SWPB:		0
+  Aborted SWP{B}:		1
+  Last process:		314
 
+
+NOTE:
+  when accessing uncached shared regions, LDREX/STREX rely on an external
+  transaction monitoring block called a global monitor to maintain update
+  atomicity. If your system does not implement a global monitor, this option can
+  cause programs that perform SWP operations to uncached memory to deadlock, as
+  the STREX operation will always fail.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.rst
index 7c15871c1885..effd9c7bc968 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.rst
@@ -1,5 +1,7 @@
+==================================================
 ARM TCM (Tightly-Coupled Memory) handling in Linux
-----
+==================================================
+
 Written by Linus Walleij <linus.walleij@stericsson.com>
 
 Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
@@ -85,46 +87,50 @@ to have functions called locally inside the TCM without
 wasting space, there is also the __tcmlocalfunc prefix that
 will make the call relative.
 
-Variables to go into dtcm can be tagged like this:
-int __tcmdata foo;
+Variables to go into dtcm can be tagged like this::
+
+  int __tcmdata foo;
+
+Constants can be tagged like this::
 
-Constants can be tagged like this:
-int __tcmconst foo;
+  int __tcmconst foo;
+
+To put assembler into TCM just use::
+
+  .section ".tcm.text" or .section ".tcm.data"
 
-To put assembler into TCM just use
-.section ".tcm.text" or .section ".tcm.data"
 respectively.
 
-Example code:
+Example code::
 
-#include <asm/tcm.h>
+  #include <asm/tcm.h>
 
-/* Uninitialized data */
-static u32 __tcmdata tcmvar;
-/* Initialized data */
-static u32 __tcmdata tcmassigned = 0x2BADBABEU;
-/* Constant */
-static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+  /* Uninitialized data */
+  static u32 __tcmdata tcmvar;
+  /* Initialized data */
+  static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+  /* Constant */
+  static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
 
-static void __tcmlocalfunc tcm_to_tcm(void)
-{
+  static void __tcmlocalfunc tcm_to_tcm(void)
+  {
 	int i;
 	for (i = 0; i < 100; i++)
 		tcmvar ++;
-}
+  }
 
-static void __tcmfunc hello_tcm(void)
-{
+  static void __tcmfunc hello_tcm(void)
+  {
 	/* Some abstract code that runs in ITCM */
 	int i;
 	for (i = 0; i < 100; i++) {
 		tcmvar ++;
 	}
 	tcm_to_tcm();
-}
+  }
 
-static void __init test_tcm(void)
-{
+  static void __init test_tcm(void)
+  {
 	u32 *tcmem;
 	int i;
 
@@ -152,4 +158,4 @@ static void __init test_tcm(void)
 			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
 		tcm_free(tcmem, 20);
 	}
-}
+  }
diff --git a/Documentation/arm/uefi.txt b/Documentation/arm/uefi.rst
index 6543a0adea8a..f868330df6be 100644
--- a/Documentation/arm/uefi.txt
+++ b/Documentation/arm/uefi.rst
@@ -1,3 +1,7 @@
+================================================
+The Unified Extensible Firmware Interface (UEFI)
+================================================
+
 UEFI, the Unified Extensible Firmware Interface, is a specification
 governing the behaviours of compatible firmware interfaces. It is
 maintained by the UEFI Forum - http://www.uefi.org/.
@@ -11,11 +15,13 @@ UEFI support in Linux
 =====================
 Booting on a platform with firmware compliant with the UEFI specification
 makes it possible for the kernel to support additional features:
+
 - UEFI Runtime Services
 - Retrieving various configuration information through the standardised
   interface of UEFI configuration tables. (ACPI, SMBIOS, ...)
 
 For actually enabling [U]EFI support, enable:
+
 - CONFIG_EFI=y
 - CONFIG_EFI_VARS=y or m
 
@@ -42,19 +48,20 @@ Instead, the kernel reads the UEFI memory map.
 
 The stub populates the FDT /chosen node with (and the kernel scans for) the
 following parameters:
-________________________________________________________________________________
-Name                      | Size   | Description
-================================================================================
-linux,uefi-system-table   | 64-bit | Physical address of the UEFI System Table.
---------------------------------------------------------------------------------
-linux,uefi-mmap-start     | 64-bit | Physical address of the UEFI memory map,
-                          |        | populated by the UEFI GetMemoryMap() call.
---------------------------------------------------------------------------------
-linux,uefi-mmap-size      | 32-bit | Size in bytes of the UEFI memory map
-                          |        | pointed to in previous entry.
---------------------------------------------------------------------------------
-linux,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI
-                          |        | memory map.
---------------------------------------------------------------------------------
-linux,uefi-mmap-desc-ver  | 32-bit | Version of the mmap descriptor format.
---------------------------------------------------------------------------------
+
+==========================  ======   ===========================================
+Name                        Size     Description
+==========================  ======   ===========================================
+linux,uefi-system-table     64-bit   Physical address of the UEFI System Table.
+
+linux,uefi-mmap-start       64-bit   Physical address of the UEFI memory map,
+                                     populated by the UEFI GetMemoryMap() call.
+
+linux,uefi-mmap-size        32-bit   Size in bytes of the UEFI memory map
+                                     pointed to in previous entry.
+
+linux,uefi-mmap-desc-size   32-bit   Size in bytes of each entry in the UEFI
+                                     memory map.
+
+linux,uefi-mmap-desc-ver    32-bit   Version of the mmap descriptor format.
+==========================  ======   ===========================================
diff --git a/Documentation/arm/VFP/release-notes.txt b/Documentation/arm/vfp/release-notes.rst
index 28a2795705ca..c6b04937cee3 100644
--- a/Documentation/arm/VFP/release-notes.txt
+++ b/Documentation/arm/vfp/release-notes.rst
@@ -1,7 +1,9 @@
+===============================================
 Release notes for Linux Kernel VFP support code
------------------------------------------------
+===============================================
 
 Date: 	20 May 2004
+
 Author:	Russell King
 
 This is the first release of the Linux Kernel VFP support code.  It
diff --git a/Documentation/arm/vlocks.txt b/Documentation/arm/vlocks.rst
index 45731672c564..a40a1742110b 100644
--- a/Documentation/arm/vlocks.txt
+++ b/Documentation/arm/vlocks.rst
@@ -1,3 +1,4 @@
+======================================
 vlocks for Bare-Metal Mutual Exclusion
 ======================================
 
@@ -26,7 +27,7 @@ started yet.
 Algorithm
 ---------
 
-The easiest way to explain the vlocks algorithm is with some pseudo-code:
+The easiest way to explain the vlocks algorithm is with some pseudo-code::
 
 
 	int currently_voting[NR_CPUS] = { 0, };
@@ -93,7 +94,7 @@ Features and limitations
    number of CPUs.
 
    vlocks can be cascaded in a voting hierarchy to permit better scaling
-   if necessary, as in the following hypothetical example for 4096 CPUs:
+   if necessary, as in the following hypothetical example for 4096 CPUs::
 
 	/* first level: local election */
 	my_town = towns[(this_cpu >> 4) & 0xf];
@@ -127,12 +128,12 @@ the basic algorithm:
    reduces the number of round-trips required to external memory.
 
    In the ARM implementation, this means that we can use a single load
-   and comparison:
+   and comparison::
 
 	LDR	Rt, [Rn]
 	CMP	Rt, #0
 
-   ...in place of code equivalent to:
+   ...in place of code equivalent to::
 
 	LDRB	Rt, [Rn]
 	CMP	Rt, #0
diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst
index 018b7836ecb7..96b696ba4e6c 100644
--- a/Documentation/arm64/index.rst
+++ b/Documentation/arm64/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ==================
 ARM64 Architecture
 ==================
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
deleted file mode 100644
index 01bce243d3d7..000000000000
--- a/Documentation/backlight/lp855x-driver.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Kernel driver lp855x
-====================
-
-Backlight driver for LP855x ICs
-
-Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
-	LP8557
-
-Author: Milo(Woogyom) Kim <milo.kim@ti.com>
-
-Description
------------
-
-* Brightness control
-
-Brightness can be controlled by the pwm input or the i2c command.
-The lp855x driver supports both cases.
-
-* Device attributes
-
-1) bl_ctl_mode
-Backlight control mode.
-Value : pwm based or register based
-
-2) chip_id
-The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
-
-Platform data for lp855x
-------------------------
-
-For supporting platform specific data, the lp855x platform data can be used.
-
-* name : Backlight driver name. If it is not defined, default name is set.
-* device_control : Value of DEVICE CONTROL register.
-* initial_brightness : Initial value of backlight brightness.
-* period_ns : Platform specific PWM period value. unit is nano.
-	     Only valid when brightness is pwm input mode.
-* size_program : Total size of lp855x_rom_data.
-* rom_data : List of new eeprom/eprom registers.
-
-example 1) lp8552 platform data : i2c register mode with new eeprom data
-
-#define EEPROM_A5_ADDR	0xA5
-#define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
-
-static struct lp855x_rom_data lp8552_eeprom_arr[] = {
-	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
-};
-
-static struct lp855x_platform_data lp8552_pdata = {
-	.name = "lcd-bl",
-	.device_control = I2C_CONFIG(LP8552),
-	.initial_brightness = INITIAL_BRT,
-	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
-	.rom_data = lp8552_eeprom_arr,
-};
-
-example 2) lp8556 platform data : pwm input mode with default rom data
-
-static struct lp855x_platform_data lp8556_pdata = {
-	.device_control = PWM_CONFIG(LP8556),
-	.initial_brightness = INITIAL_BRT,
-	.period_ns = 1000000,
-};
diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.rst
index bbd6eb5bbb07..0d237d402860 100644
--- a/Documentation/block/bfq-iosched.txt
+++ b/Documentation/block/bfq-iosched.rst
@@ -1,9 +1,11 @@
+==========================
 BFQ (Budget Fair Queueing)
 ==========================
 
 BFQ is a proportional-share I/O scheduler, with some extra
 low-latency capabilities. In addition to cgroups support (blkio or io
 controllers), BFQ's main features are:
+
 - BFQ guarantees a high system and application responsiveness, and a
   low latency for time-sensitive applications, such as audio or video
   players;
@@ -55,18 +57,18 @@ sustainable throughputs, on the same systems as above:
 
 BFQ works for multi-queue devices too.
 
-The table of contents follow. Impatients can just jump to Section 3.
+.. The table of contents follow. Impatients can just jump to Section 3.
 
-CONTENTS
+.. CONTENTS
 
-1. When may BFQ be useful?
- 1-1 Personal systems
- 1-2 Server systems
-2. How does BFQ work?
-3. What are BFQ's tunables and how to properly configure BFQ?
-4. BFQ group scheduling
- 4-1 Service guarantees provided
- 4-2 Interface
+   1. When may BFQ be useful?
+    1-1 Personal systems
+    1-2 Server systems
+   2. How does BFQ work?
+   3. What are BFQ's tunables and how to properly configure BFQ?
+   4. BFQ group scheduling
+    4-1 Service guarantees provided
+    4-2 Interface
 
 1. When may BFQ be useful?
 ==========================
@@ -77,17 +79,20 @@ BFQ provides the following benefits on personal and server systems.
 --------------------
 
 Low latency for interactive applications
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Regardless of the actual background workload, BFQ guarantees that, for
 interactive tasks, the storage device is virtually as responsive as if
 it was idle. For example, even if one or more of the following
 background workloads are being executed:
+
 - one or more large files are being read, written or copied,
 - a tree of source files is being compiled,
 - one or more virtual machines are performing I/O,
 - a software update is in progress,
 - indexing daemons are scanning filesystems and updating their
   databases,
+
 starting an application or loading a file from within an application
 takes about the same time as if the storage device was idle. As a
 comparison, with CFQ, NOOP or DEADLINE, and in the same conditions,
@@ -95,13 +100,14 @@ applications experience high latencies, or even become unresponsive
 until the background workload terminates (also on SSDs).
 
 Low latency for soft real-time applications
-
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Also soft real-time applications, such as audio and video
 players/streamers, enjoy a low latency and a low drop rate, regardless
 of the background I/O workload. As a consequence, these applications
 do not suffer from almost any glitch due to the background workload.
 
 Higher speed for code-development tasks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 If some additional workload happens to be executed in parallel, then
 BFQ executes the I/O-related components of typical code-development
@@ -109,6 +115,7 @@ tasks (compilation, checkout, merge, ...) much more quickly than CFQ,
 NOOP or DEADLINE.
 
 High throughput
+^^^^^^^^^^^^^^^
 
 On hard disks, BFQ achieves up to 30% higher throughput than CFQ, and
 up to 150% higher throughput than DEADLINE and NOOP, with all the
@@ -117,6 +124,7 @@ and with all the workloads on flash-based devices, BFQ achieves,
 instead, about the same throughput as the other schedulers.
 
 Strong fairness, bandwidth and delay guarantees
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 BFQ distributes the device throughput, and not just the device time,
 among I/O-bound applications in proportion their weights, with any
@@ -133,15 +141,15 @@ Most benefits for server systems follow from the same service
 properties as above. In particular, regardless of whether additional,
 possibly heavy workloads are being served, BFQ guarantees:
 
-. audio and video-streaming with zero or very low jitter and drop
+* audio and video-streaming with zero or very low jitter and drop
   rate;
 
-. fast retrieval of WEB pages and embedded objects;
+* fast retrieval of WEB pages and embedded objects;
 
-. real-time recording of data in live-dumping applications (e.g.,
+* real-time recording of data in live-dumping applications (e.g.,
   packet logging);
 
-. responsiveness in local and remote access to a server.
+* responsiveness in local and remote access to a server.
 
 
 2. How does BFQ work?
@@ -151,7 +159,7 @@ BFQ is a proportional-share I/O scheduler, whose general structure,
 plus a lot of code, are borrowed from CFQ.
 
 - Each process doing I/O on a device is associated with a weight and a
-  (bfq_)queue.
+  `(bfq_)queue`.
 
 - BFQ grants exclusive access to the device, for a while, to one queue
   (process) at a time, and implements this service model by
@@ -539,12 +547,13 @@ As for cgroups-v1 (blkio controller), the exact set of stat files
 created, and kept up-to-date by bfq, depends on whether
 CONFIG_BFQ_CGROUP_DEBUG is set. If it is set, then bfq creates all
 the stat files documented in
-Documentation/cgroup-v1/blkio-controller.rst. If, instead,
-CONFIG_BFQ_CGROUP_DEBUG is not set, then bfq creates only the files
-blkio.bfq.io_service_bytes
-blkio.bfq.io_service_bytes_recursive
-blkio.bfq.io_serviced
-blkio.bfq.io_serviced_recursive
+Documentation/admin-guide/cgroup-v1/blkio-controller.rst. If, instead,
+CONFIG_BFQ_CGROUP_DEBUG is not set, then bfq creates only the files::
+
+  blkio.bfq.io_service_bytes
+  blkio.bfq.io_service_bytes_recursive
+  blkio.bfq.io_serviced
+  blkio.bfq.io_serviced_recursive
 
 The value of CONFIG_BFQ_CGROUP_DEBUG greatly influences the maximum
 throughput sustainable with bfq, because updating the blkio.bfq.*
@@ -567,17 +576,22 @@ weight of the queues associated with interactive and soft real-time
 applications. Unset this tunable if you need/want to control weights.
 
 
-[1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
+[1]
+    P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
     Scheduler", Proceedings of the First Workshop on Mobile System
     Technologies (MST-2015), May 2015.
+
     http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf
 
-[2] P. Valente and M. Andreolini, "Improving Application
+[2]
+    P. Valente and M. Andreolini, "Improving Application
     Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
     the 5th Annual International Systems and Storage Conference
     (SYSTOR '12), June 2012.
+
     Slightly extended version:
-    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
-							results.pdf
 
-[3] https://github.com/Algodev-github/S
+    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-results.pdf
+
+[3]
+   https://github.com/Algodev-github/S
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.rst
index 5a4a799fe61b..b964796ec9c7 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.rst
@@ -1,15 +1,25 @@
-	Notes on the Generic Block Layer Rewrite in Linux 2.5
-	=====================================================
+=====================================================
+Notes on the Generic Block Layer Rewrite in Linux 2.5
+=====================================================
+
+.. note::
+
+	It seems that there are lot of outdated stuff here. This seems
+	to be written somewhat as a task list. Yet, eventually, something
+	here might still be useful.
 
 Notes Written on Jan 15, 2002:
-	Jens Axboe <jens.axboe@oracle.com>
-	Suparna Bhattacharya <suparna@in.ibm.com>
+
+	- Jens Axboe <jens.axboe@oracle.com>
+	- Suparna Bhattacharya <suparna@in.ibm.com>
 
 Last Updated May 2, 2002
+
 September 2003: Updated I/O Scheduler portions
-	Nick Piggin <npiggin@kernel.dk>
+	- Nick Piggin <npiggin@kernel.dk>
 
-Introduction:
+Introduction
+============
 
 These are some notes describing some aspects of the 2.5 block layer in the
 context of the bio rewrite. The idea is to bring out some of the key
@@ -17,11 +27,11 @@ changes and a glimpse of the rationale behind those changes.
 
 Please mail corrections & suggestions to suparna@in.ibm.com.
 
-Credits:
----------
+Credits
+=======
 
 2.5 bio rewrite:
-	Jens Axboe <jens.axboe@oracle.com>
+	- Jens Axboe <jens.axboe@oracle.com>
 
 Many aspects of the generic block layer redesign were driven by and evolved
 over discussions, prior patches and the collective experience of several
@@ -29,62 +39,63 @@ people. See sections 8 and 9 for a list of some related references.
 
 The following people helped with review comments and inputs for this
 document:
-	Christoph Hellwig <hch@infradead.org>
-	Arjan van de Ven <arjanv@redhat.com>
-	Randy Dunlap <rdunlap@xenotime.net>
-	Andre Hedrick <andre@linux-ide.org>
+
+	- Christoph Hellwig <hch@infradead.org>
+	- Arjan van de Ven <arjanv@redhat.com>
+	- Randy Dunlap <rdunlap@xenotime.net>
+	- Andre Hedrick <andre@linux-ide.org>
 
 The following people helped with fixes/contributions to the bio patches
 while it was still work-in-progress:
-	David S. Miller <davem@redhat.com>
 
+	- David S. Miller <davem@redhat.com>
 
-Description of Contents:
-------------------------
 
-1. Scope for tuning of logic to various needs
-  1.1 Tuning based on device or low level driver capabilities
+.. Description of Contents:
+
+   1. Scope for tuning of logic to various needs
+     1.1 Tuning based on device or low level driver capabilities
 	- Per-queue parameters
 	- Highmem I/O support
 	- I/O scheduler modularization
-  1.2 Tuning based on high level requirements/capabilities
+     1.2 Tuning based on high level requirements/capabilities
 	1.2.1 Request Priority/Latency
-  1.3 Direct access/bypass to lower layers for diagnostics and special
-      device operations
+     1.3 Direct access/bypass to lower layers for diagnostics and special
+	 device operations
 	1.3.1 Pre-built commands
-2. New flexible and generic but minimalist i/o structure or descriptor
-   (instead of using buffer heads at the i/o layer)
-  2.1 Requirements/Goals addressed
-  2.2 The bio struct in detail (multi-page io unit)
-  2.3 Changes in the request structure
-3. Using bios
-  3.1 Setup/teardown (allocation, splitting)
-  3.2 Generic bio helper routines
-    3.2.1 Traversing segments and completion units in a request
-    3.2.2 Setting up DMA scatterlists
-    3.2.3 I/O completion
-    3.2.4 Implications for drivers that do not interpret bios (don't handle
- 	  multiple segments)
-  3.3 I/O submission
-4. The I/O scheduler
-5. Scalability related changes
-  5.1 Granular locking: Removal of io_request_lock
-  5.2 Prepare for transition to 64 bit sector_t
-6. Other Changes/Implications
-  6.1 Partition re-mapping handled by the generic block layer
-7. A few tips on migration of older drivers
-8. A list of prior/related/impacted patches/ideas
-9. Other References/Discussion Threads
+   2. New flexible and generic but minimalist i/o structure or descriptor
+      (instead of using buffer heads at the i/o layer)
+     2.1 Requirements/Goals addressed
+     2.2 The bio struct in detail (multi-page io unit)
+     2.3 Changes in the request structure
+   3. Using bios
+     3.1 Setup/teardown (allocation, splitting)
+     3.2 Generic bio helper routines
+       3.2.1 Traversing segments and completion units in a request
+       3.2.2 Setting up DMA scatterlists
+       3.2.3 I/O completion
+       3.2.4 Implications for drivers that do not interpret bios (don't handle
+	  multiple segments)
+     3.3 I/O submission
+   4. The I/O scheduler
+   5. Scalability related changes
+     5.1 Granular locking: Removal of io_request_lock
+     5.2 Prepare for transition to 64 bit sector_t
+   6. Other Changes/Implications
+     6.1 Partition re-mapping handled by the generic block layer
+   7. A few tips on migration of older drivers
+   8. A list of prior/related/impacted patches/ideas
+   9. Other References/Discussion Threads
 
----------------------------------------------------------------------------
 
 Bio Notes
---------
+=========
 
 Let us discuss the changes in the context of how some overall goals for the
 block layer are addressed.
 
 1. Scope for tuning the generic logic to satisfy various requirements
+=====================================================================
 
 The block layer design supports adaptable abstractions to handle common
 processing with the ability to tune the logic to an appropriate extent
@@ -97,6 +108,7 @@ and application/middleware software designed to take advantage of these
 capabilities.
 
 1.1 Tuning based on low level device / driver capabilities
+----------------------------------------------------------
 
 Sophisticated devices with large built-in caches, intelligent i/o scheduling
 optimizations, high memory DMA support, etc may find some of the
@@ -133,12 +145,12 @@ Some new queue property settings:
 		Sets two variables that limit the size of the request.
 
 		- The request queue's max_sectors, which is a soft size in
-		units of 512 byte sectors, and could be dynamically varied
-		by the core kernel.
+		  units of 512 byte sectors, and could be dynamically varied
+		  by the core kernel.
 
 		- The request queue's max_hw_sectors, which is a hard limit
-		and reflects the maximum size request a driver can handle
-		in units of 512 byte sectors.
+		  and reflects the maximum size request a driver can handle
+		  in units of 512 byte sectors.
 
 		The default for both max_sectors and max_hw_sectors is
 		255. The upper limit of max_sectors is 1024.
@@ -161,8 +173,8 @@ Some new queue property settings:
 
 New queue flags:
 
-	QUEUE_FLAG_CLUSTER (see 3.2.2)
-	QUEUE_FLAG_QUEUED (see 3.2.4)
+	- QUEUE_FLAG_CLUSTER (see 3.2.2)
+	- QUEUE_FLAG_QUEUED (see 3.2.4)
 
 
 ii. High-mem i/o capabilities are now considered the default
@@ -234,6 +246,7 @@ I/O scheduler wrappers are to be used instead of accessing the queue directly.
 See section 4. The I/O scheduler for details.
 
 1.2 Tuning Based on High level code capabilities
+------------------------------------------------
 
 i. Application capabilities for raw i/o
 
@@ -258,9 +271,11 @@ would need an additional mechanism either via open flags or ioctls, or some
 other upper level mechanism to communicate such settings to block.
 
 1.2.1 Request Priority/Latency
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Todo/Under discussion:
-Arjan's proposed request priority scheme allows higher levels some broad
+Todo/Under discussion::
+
+  Arjan's proposed request priority scheme allows higher levels some broad
   control (high/med/low) over the priority  of an i/o request vs other pending
   requests in the queue. For example it allows reads for bringing in an
   executable page on demand to be given a higher priority over pending write
@@ -272,7 +287,9 @@ Arjan's proposed request priority scheme allows higher levels some broad
 
 
 1.3 Direct Access to Low level Device/Driver Capabilities (Bypass mode)
-    (e.g Diagnostics, Systems Management)
+-----------------------------------------------------------------------
+
+(e.g Diagnostics, Systems Management)
 
 There are situations where high-level code needs to have direct access to
 the low level device capabilities or requires the ability to issue commands
@@ -308,28 +325,32 @@ involved. In the latter case, the driver would modify and manage the
 request->buffer, request->sector and request->nr_sectors or
 request->current_nr_sectors fields itself rather than using the block layer
 end_request or end_that_request_first completion interfaces.
-(See 2.3 or Documentation/block/request.txt for a brief explanation of
+(See 2.3 or Documentation/block/request.rst for a brief explanation of
 the request structure fields)
 
-[TBD: end_that_request_last should be usable even in this case;
-Perhaps an end_that_direct_request_first routine could be implemented to make
-handling direct requests easier for such drivers; Also for drivers that
-expect bios, a helper function could be provided for setting up a bio
-corresponding to a data buffer]
-
-<JENS: I dont understand the above, why is end_that_request_first() not
-usable? Or _last for that matter. I must be missing something>
-<SUP: What I meant here was that if the request doesn't have a bio, then
- end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
- and hence can't be used for advancing request state settings on the
- completion of partial transfers. The driver has to modify these fields 
- directly by hand.
- This is because end_that_request_first only iterates over the bio list,
- and always returns 0 if there are none associated with the request.
- _last works OK in this case, and is not a problem, as I mentioned earlier
->
+::
+
+  [TBD: end_that_request_last should be usable even in this case;
+  Perhaps an end_that_direct_request_first routine could be implemented to make
+  handling direct requests easier for such drivers; Also for drivers that
+  expect bios, a helper function could be provided for setting up a bio
+  corresponding to a data buffer]
+
+  <JENS: I dont understand the above, why is end_that_request_first() not
+  usable? Or _last for that matter. I must be missing something>
+
+  <SUP: What I meant here was that if the request doesn't have a bio, then
+   end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
+   and hence can't be used for advancing request state settings on the
+   completion of partial transfers. The driver has to modify these fields
+   directly by hand.
+   This is because end_that_request_first only iterates over the bio list,
+   and always returns 0 if there are none associated with the request.
+   _last works OK in this case, and is not a problem, as I mentioned earlier
+  >
 
 1.3.1 Pre-built Commands
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 A request can be created with a pre-built custom command  to be sent directly
 to the device. The cmd block in the request structure has room for filling
@@ -360,9 +381,11 @@ Aside:
   the pre-builder hook can be invoked there.
 
 
-2. Flexible and generic but minimalist i/o structure/descriptor.
+2. Flexible and generic but minimalist i/o structure/descriptor
+===============================================================
 
 2.1 Reason for a new structure and requirements addressed
+---------------------------------------------------------
 
 Prior to 2.5, buffer heads were used as the unit of i/o at the generic block
 layer, and the low level request structure was associated with a chain of
@@ -378,26 +401,26 @@ which were generated for each such chunk.
 The following were some of the goals and expectations considered in the
 redesign of the block i/o data structure in 2.5.
 
-i.  Should be appropriate as a descriptor for both raw and buffered i/o  -
+1.  Should be appropriate as a descriptor for both raw and buffered i/o  -
     avoid cache related fields which are irrelevant in the direct/page i/o path,
     or filesystem block size alignment restrictions which may not be relevant
     for raw i/o.
-ii. Ability to represent high-memory buffers (which do not have a virtual
+2.  Ability to represent high-memory buffers (which do not have a virtual
     address mapping in kernel address space).
-iii.Ability to represent large i/os w/o unnecessarily breaking them up (i.e
+3.  Ability to represent large i/os w/o unnecessarily breaking them up (i.e
     greater than PAGE_SIZE chunks in one shot)
-iv. At the same time, ability to retain independent identity of i/os from
+4.  At the same time, ability to retain independent identity of i/os from
     different sources or i/o units requiring individual completion (e.g. for
     latency reasons)
-v.  Ability to represent an i/o involving multiple physical memory segments
+5.  Ability to represent an i/o involving multiple physical memory segments
     (including non-page aligned page fragments, as specified via readv/writev)
     without unnecessarily breaking it up, if the underlying device is capable of
     handling it.
-vi. Preferably should be based on a memory descriptor structure that can be
+6.  Preferably should be based on a memory descriptor structure that can be
     passed around different types of subsystems or layers, maybe even
     networking, without duplication or extra copies of data/descriptor fields
     themselves in the process
-vii.Ability to handle the possibility of splits/merges as the structure passes
+7.  Ability to handle the possibility of splits/merges as the structure passes
     through layered drivers (lvm, md, evms), with minimal overhead.
 
 The solution was to define a new structure (bio)  for the block layer,
@@ -408,6 +431,7 @@ bh structure for buffered i/o, and in the case of raw/direct i/o kiobufs are
 mapped to bio structures.
 
 2.2 The bio struct
+------------------
 
 The bio structure uses a vector representation pointing to an array of tuples
 of <page, offset, len> to describe the i/o buffer, and has various other
@@ -417,16 +441,18 @@ performing the i/o.
 Notice that this representation means that a bio has no virtual address
 mapping at all (unlike buffer heads).
 
-struct bio_vec {
+::
+
+  struct bio_vec {
        struct page     *bv_page;
        unsigned short  bv_len;
        unsigned short  bv_offset;
-};
+  };
 
-/*
- * main unit of I/O for the block layer and lower layers (ie drivers)
- */
-struct bio {
+  /*
+   * main unit of I/O for the block layer and lower layers (ie drivers)
+   */
+  struct bio {
        struct bio          *bi_next;    /* request queue link */
        struct block_device *bi_bdev;	/* target device */
        unsigned long       bi_flags;    /* status, command, etc */
@@ -443,7 +469,7 @@ struct bio {
        bio_end_io_t	*bi_end_io;  /* bi_end_io (bio) */
        atomic_t		bi_cnt;	     /* pin count: free when it hits zero */
        void             *bi_private;
-};
+  };
 
 With this multipage bio design:
 
@@ -453,7 +479,7 @@ With this multipage bio design:
 - Splitting of an i/o request across multiple devices (as in the case of
   lvm or raid) is achieved by cloning the bio (where the clone points to
   the same bi_io_vec array, but with the index and size accordingly modified)
-- A linked list of bios is used as before for unrelated merges (*) - this
+- A linked list of bios is used as before for unrelated merges [#]_ - this
   avoids reallocs and makes independent completions easier to handle.
 - Code that traverses the req list can find all the segments of a bio
   by using rq_for_each_segment.  This handles the fact that a request
@@ -462,10 +488,12 @@ With this multipage bio design:
   field to keep track of the next bio_vec entry to process.
   (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
   [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying
-   bi_offset an len fields]
+  bi_offset an len fields]
+
+.. [#]
 
-(*) unrelated merges -- a request ends up containing two or more bios that
-    didn't originate from the same place.
+	unrelated merges -- a request ends up containing two or more bios that
+	didn't originate from the same place.
 
 bi_end_io() i/o callback gets called on i/o completion of the entire bio.
 
@@ -483,10 +511,11 @@ which in turn means that only raw I/O uses it (direct i/o may not work
 right now). The intent however is to enable clustering of pages etc to
 become possible. The pagebuf abstraction layer from SGI also uses multi-page
 bios, but that is currently not included in the stock development kernels.
-The same is true of Andrew Morton's work-in-progress multipage bio writeout 
+The same is true of Andrew Morton's work-in-progress multipage bio writeout
 and readahead patches.
 
 2.3 Changes in the Request Structure
+------------------------------------
 
 The request structure is the structure that gets passed down to low level
 drivers. The block layer make_request function builds up a request structure,
@@ -499,11 +528,11 @@ request structure.
 Only some relevant fields (mainly those which changed or may be referred
 to in some of the discussion here) are listed below, not necessarily in
 the order in which they occur in the structure (see include/linux/blkdev.h)
-Refer to Documentation/block/request.txt for details about all the request
+Refer to Documentation/block/request.rst for details about all the request
 structure fields and a quick reference about the layers which are
-supposed to use or modify those fields.
+supposed to use or modify those fields::
 
-struct request {
+  struct request {
 	struct list_head queuelist;  /* Not meant to be directly accessed by
 					the driver.
 					Used by q->elv_next_request_fn
@@ -548,11 +577,11 @@ struct request {
 	.
 	struct bio *bio, *biotail;  /* bio list instead of bh */
 	struct request_list *rl;
-}
-	
+  }
+
 See the req_ops and req_flag_bits definitions for an explanation of the various
 flags available. Some bits are used by the block layer or i/o scheduler.
-	
+
 The behaviour of the various sector counts are almost the same as before,
 except that since we have multi-segment bios, current_nr_sectors refers
 to the numbers of sectors in the current segment being processed which could
@@ -578,8 +607,10 @@ a driver needs to be careful about interoperation with the block layer helper
 functions which the driver uses. (Section 1.3)
 
 3. Using bios
+=============
 
 3.1 Setup/Teardown
+------------------
 
 There are routines for managing the allocation, and reference counting, and
 freeing of bios (bio_alloc, bio_get, bio_put).
@@ -606,10 +637,13 @@ case of bio, these routines make use of the standard slab allocator.
 The caller of bio_alloc is expected to taken certain steps to avoid
 deadlocks, e.g. avoid trying to allocate more memory from the pool while
 already holding memory obtained from the pool.
-[TBD: This is a potential issue, though a rare possibility
- in the bounce bio allocation that happens in the current code, since
- it ends up allocating a second bio from the same pool while
- holding the original bio ]
+
+::
+
+  [TBD: This is a potential issue, though a rare possibility
+   in the bounce bio allocation that happens in the current code, since
+   it ends up allocating a second bio from the same pool while
+   holding the original bio ]
 
 Memory allocated from the pool should be released back within a limited
 amount of time (in the case of bio, that would be after the i/o is completed).
@@ -635,14 +669,18 @@ same bio_vec_list). This would typically be used for splitting i/o requests
 in lvm or md.
 
 3.2 Generic bio helper Routines
+-------------------------------
 
 3.2.1 Traversing segments and completion units in a request
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The macro rq_for_each_segment() should be used for traversing the bios
 in the request list (drivers should avoid directly trying to do it
 themselves). Using these helpers should also make it easier to cope
 with block changes in the future.
 
+::
+
 	struct req_iterator iter;
 	rq_for_each_segment(bio_vec, rq, iter)
 		/* bio_vec is now current segment */
@@ -653,6 +691,7 @@ which don't make a distinction between segments and completion units would
 need to be reorganized to support multi-segment bios.
 
 3.2.2 Setting up DMA scatterlists
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The blk_rq_map_sg() helper routine would be used for setting up scatter
 gather lists from a request, so a driver need not do it on its own.
@@ -683,6 +722,7 @@ of physical data segments in a request (i.e. the largest sized scatter list
 a driver could handle)
 
 3.2.3 I/O completion
+^^^^^^^^^^^^^^^^^^^^
 
 The existing generic block layer helper routines end_request,
 end_that_request_first and end_that_request_last can be used for i/o
@@ -691,8 +731,10 @@ request can be kicked of) as before. With the introduction of multi-page
 bio support, end_that_request_first requires an additional argument indicating
 the number of sectors completed.
 
-3.2.4 Implications for drivers that do not interpret bios (don't handle
- multiple segments)
+3.2.4 Implications for drivers that do not interpret bios
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+(don't handle multiple segments)
 
 Drivers that do not interpret bios e.g those which do not handle multiple
 segments and do not support i/o into high memory addresses (require bounce
@@ -707,15 +749,18 @@ be used if only if the request has come down from block/bio path, not for
 direct access requests which only specify rq->buffer without a valid rq->bio)
 
 3.3 I/O Submission
+------------------
 
 The routine submit_bio() is used to submit a single io. Higher level i/o
 routines make use of this:
 
 (a) Buffered i/o:
+
 The routine submit_bh() invokes submit_bio() on a bio corresponding to the
 bh, allocating the bio if required. ll_rw_block() uses submit_bh() as before.
 
 (b) Kiobuf i/o (for raw/direct i/o):
+
 The ll_rw_kio() routine breaks up the kiobuf into page sized chunks and
 maps the array to one or more multi-page bios, issuing submit_bio() to
 perform the i/o on each of these.
@@ -738,6 +783,7 @@ Todo/Observation:
 
 
 (c) Page i/o:
+
 Todo/Under discussion:
 
  Andrew Morton's multi-page bio patches attempt to issue multi-page
@@ -753,6 +799,7 @@ Todo/Under discussion:
  abstraction, but intended to be as lightweight as possible).
 
 (d) Direct access i/o:
+
 Direct access requests that do not contain bios would be submitted differently
 as discussed earlier in section 1.3.
 
@@ -780,11 +827,13 @@ Aside:
 
 
 4. The I/O scheduler
+====================
+
 I/O scheduler, a.k.a. elevator, is implemented in two layers.  Generic dispatch
 queue and specific I/O schedulers.  Unless stated otherwise, elevator is used
 to refer to both parts and I/O scheduler to specific I/O schedulers.
 
-Block layer implements generic dispatch queue in block/*.c.
+Block layer implements generic dispatch queue in `block/*.c`.
 The generic dispatch queue is responsible for requeueing, handling non-fs
 requests and all other subtleties.
 
@@ -802,8 +851,11 @@ doesn't implement a function, the switch does nothing or some minimal house
 keeping work.
 
 4.1. I/O scheduler API
+----------------------
 
 The functions an elevator may implement are: (* are mandatory)
+
+=============================== ================================================
 elevator_merge_fn		called to query requests for merge with a bio
 
 elevator_merge_req_fn		called when two requests get merged. the one
@@ -857,8 +909,11 @@ elevator_deactivate_req_fn	Called when device driver decides to delay
 elevator_init_fn*
 elevator_exit_fn		Allocate and free any elevator specific storage
 				for a queue.
+=============================== ================================================
 
 4.2 Request flows seen by I/O schedulers
+----------------------------------------
+
 All requests seen by I/O schedulers strictly follow one of the following three
 flows.
 
@@ -872,9 +927,12 @@ flows.
  -> put_req_fn
 
 4.3 I/O scheduler implementation
+--------------------------------
+
 The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
 optimal disk scan and request servicing performance (based on generic
 principles and device capabilities), optimized for:
+
 i.   improved throughput
 ii.  improved latency
 iii. better utilization of h/w & CPU time
@@ -928,15 +986,19 @@ Aside:
   a big request from the broken up pieces coming by.
 
 4.4 I/O contexts
+----------------
+
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,
-priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
+priorities for example). See `*io_context` in block/ll_rw_blk.c, and as-iosched.c
 for an example of usage in an i/o scheduler.
 
 
 5. Scalability related changes
+==============================
 
 5.1 Granular Locking: io_request_lock replaced by a per-queue lock
+------------------------------------------------------------------
 
 The global io_request_lock has been removed as of 2.5, to avoid
 the scalability bottleneck it was causing, and has been replaced by more
@@ -951,20 +1013,23 @@ request_fn execution which it means that lots of older drivers
 should still be SMP safe. Drivers are free to drop the queue
 lock themselves, if required. Drivers that explicitly used the
 io_request_lock for serialization need to be modified accordingly.
-Usually it's as easy as adding a global lock:
+Usually it's as easy as adding a global lock::
 
 	static DEFINE_SPINLOCK(my_driver_lock);
 
 and passing the address to that lock to blk_init_queue().
 
 5.2 64 bit sector numbers (sector_t prepares for 64 bit support)
+----------------------------------------------------------------
 
 The sector number used in the bio structure has been changed to sector_t,
 which could be defined as 64 bit in preparation for 64 bit sector support.
 
 6. Other Changes/Implications
+=============================
 
 6.1 Partition re-mapping handled by the generic block layer
+-----------------------------------------------------------
 
 In 2.5 some of the gendisk/partition related code has been reorganized.
 Now the generic block layer performs partition-remapping early and thus
@@ -979,6 +1044,7 @@ sent are offset from the beginning of the device.
 
 
 7. A Few Tips on Migration of older drivers
+===========================================
 
 Old-style drivers that just use CURRENT and ignores clustered requests,
 may not need much change.  The generic layer will automatically handle
@@ -1012,12 +1078,12 @@ blk_init_queue time.
 
 Drivers no longer have to map a {partition, sector offset} into the
 correct absolute location anymore, this is done by the block layer, so
-where a driver received a request ala this before:
+where a driver received a request ala this before::
 
 	rq->rq_dev = mk_kdev(3, 5);	/* /dev/hda5 */
 	rq->sector = 0;			/* first sector on hda5 */
 
-  it will now see
+it will now see::
 
 	rq->rq_dev = mk_kdev(3, 0);	/* /dev/hda */
 	rq->sector = 123128;		/* offset from start of disk */
@@ -1034,38 +1100,65 @@ a bio into the virtual address space.
 
 
 8. Prior/Related/Impacted patches
+=================================
 
 8.1. Earlier kiobuf patches (sct/axboe/chait/hch/mkp)
+-----------------------------------------------------
+
 - orig kiobuf & raw i/o patches (now in 2.4 tree)
 - direct kiobuf based i/o to devices (no intermediate bh's)
 - page i/o using kiobuf
 - kiobuf splitting for lvm (mkp)
 - elevator support for kiobuf request merging (axboe)
+
 8.2. Zero-copy networking (Dave Miller)
+---------------------------------------
+
 8.3. SGI XFS - pagebuf patches - use of kiobufs
+-----------------------------------------------
 8.4. Multi-page pioent patch for bio (Christoph Hellwig)
+--------------------------------------------------------
 8.5. Direct i/o implementation (Andrea Arcangeli) since 2.4.10-pre11
+--------------------------------------------------------------------
 8.6. Async i/o implementation patch (Ben LaHaise)
+-------------------------------------------------
 8.7. EVMS layering design (IBM EVMS team)
-8.8. Larger page cache size patch (Ben LaHaise) and
-     Large page size (Daniel Phillips)
+-----------------------------------------
+8.8. Larger page cache size patch (Ben LaHaise) and Large page size (Daniel Phillips)
+-------------------------------------------------------------------------------------
+
     => larger contiguous physical memory buffers
+
 8.9. VM reservations patch (Ben LaHaise)
+----------------------------------------
 8.10. Write clustering patches ? (Marcelo/Quintela/Riel ?)
+----------------------------------------------------------
 8.11. Block device in page cache patch (Andrea Archangeli) - now in 2.4.10+
-8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar,
-      Badari)
+---------------------------------------------------------------------------
+8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar, Badari)
+-------------------------------------------------------------------------------
 8.13  Priority based i/o scheduler - prepatches (Arjan van de Ven)
+------------------------------------------------------------------
 8.14  IDE Taskfile i/o patch (Andre Hedrick)
+--------------------------------------------
 8.15  Multi-page writeout and readahead patches (Andrew Morton)
+---------------------------------------------------------------
 8.16  Direct i/o patches for 2.5 using kvec and bio (Badari Pulavarthy)
+-----------------------------------------------------------------------
 
-9. Other References:
+9. Other References
+===================
 
-9.1 The Splice I/O Model - Larry McVoy (and subsequent discussions on lkml,
-and Linus' comments - Jan 2001)
-9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan
-et al - Feb-March 2001 (many of the initial thoughts that led to bio were
-brought up in this discussion thread)
-9.3 Discussions on mempool on lkml - Dec 2001.
+9.1 The Splice I/O Model
+------------------------
+
+Larry McVoy (and subsequent discussions on lkml, and Linus' comments - Jan 2001
 
+9.2 Discussions about kiobuf and bh design
+------------------------------------------
+
+On lkml between sct, linus, alan et al - Feb-March 2001 (many of the
+initial thoughts that led to bio were brought up in this discussion thread)
+
+9.3 Discussions on mempool on lkml - Dec 2001.
+----------------------------------------------
diff --git a/Documentation/block/biovecs.txt b/Documentation/block/biovecs.rst
index ce6eccaf5df7..86fa66c87172 100644
--- a/Documentation/block/biovecs.txt
+++ b/Documentation/block/biovecs.rst
@@ -1,6 +1,6 @@
-
-Immutable biovecs and biovec iterators:
-=======================================
+======================================
+Immutable biovecs and biovec iterators
+======================================
 
 Kent Overstreet <kmo@daterainc.com>
 
@@ -121,10 +121,12 @@ Other implications:
 Usage of helpers:
 =================
 
-* The following helpers whose names have the suffix of "_all" can only be used
-on non-BIO_CLONED bio. They are usually used by filesystem code. Drivers
-shouldn't use them because the bio may have been split before it reached the
-driver.
+* The following helpers whose names have the suffix of `_all` can only be used
+  on non-BIO_CLONED bio. They are usually used by filesystem code. Drivers
+  shouldn't use them because the bio may have been split before it reached the
+  driver.
+
+::
 
 	bio_for_each_segment_all()
 	bio_first_bvec_all()
@@ -132,13 +134,13 @@ driver.
 	bio_last_bvec_all()
 
 * The following helpers iterate over single-page segment. The passed 'struct
-bio_vec' will contain a single-page IO vector during the iteration
+  bio_vec' will contain a single-page IO vector during the iteration::
 
 	bio_for_each_segment()
 	bio_for_each_segment_all()
 
 * The following helpers iterate over multi-page bvec. The passed 'struct
-bio_vec' will contain a multi-page IO vector during the iteration
+  bio_vec' will contain a multi-page IO vector during the iteration::
 
 	bio_for_each_bvec()
 	rq_for_each_bvec()
diff --git a/Documentation/block/capability.rst b/Documentation/block/capability.rst
new file mode 100644
index 000000000000..2cf258d64bbe
--- /dev/null
+++ b/Documentation/block/capability.rst
@@ -0,0 +1,18 @@
+===============================
+Generic Block Device Capability
+===============================
+
+This file documents the sysfs file block/<disk>/capability
+
+capability is a hex word indicating which capabilities a specific disk
+supports.  For more information on bits not listed here, see
+include/linux/genhd.h
+
+GENHD_FL_MEDIA_CHANGE_NOTIFY
+----------------------------
+
+Value: 4
+
+When this bit is set, the disk supports Asynchronous Notification
+of media change events.  These events will be broadcast to user
+space via kernel uevent.
diff --git a/Documentation/block/capability.txt b/Documentation/block/capability.txt
deleted file mode 100644
index 2f1729424ef4..000000000000
--- a/Documentation/block/capability.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Generic Block Device Capability
-===============================================================================
-This file documents the sysfs file block/<disk>/capability
-
-capability is a hex word indicating which capabilities a specific disk
-supports.  For more information on bits not listed here, see
-include/linux/genhd.h
-
-Capability				Value
--------------------------------------------------------------------------------
-GENHD_FL_MEDIA_CHANGE_NOTIFY		4
-	When this bit is set, the disk supports Asynchronous Notification
-	of media change events.  These events will be broadcast to user
-	space via kernel uevent.
-
diff --git a/Documentation/block/cmdline-partition.txt b/Documentation/block/cmdline-partition.rst
index 760a3f7c3ed4..530bedff548a 100644
--- a/Documentation/block/cmdline-partition.txt
+++ b/Documentation/block/cmdline-partition.rst
@@ -1,5 +1,6 @@
+==============================================
 Embedded device command line partition parsing
-=====================================================================
+==============================================
 
 The "blkdevparts" command line option adds support for reading the
 block device partition table from the kernel command line.
@@ -22,12 +23,15 @@ blkdevparts=<blkdev-def>[;<blkdev-def>]
 <size>
     partition size, in bytes, such as: 512, 1m, 1G.
     size may contain an optional suffix of (upper or lower case):
+
       K, M, G, T, P, E.
+
     "-" is used to denote all remaining space.
 
 <offset>
     partition start address, in bytes.
     offset may contain an optional suffix of (upper or lower case):
+
       K, M, G, T, P, E.
 
 (part-name)
@@ -36,11 +40,14 @@ blkdevparts=<blkdev-def>[;<blkdev-def>]
     User space application can access partition by partition name.
 
 Example:
+
     eMMC disk names are "mmcblk0" and "mmcblk0boot0".
 
-  bootargs:
+  bootargs::
+
     'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot),-(kernel)'
 
-  dmesg:
+  dmesg::
+
     mmcblk0: p1(data0) p2(data1) p3()
     mmcblk0boot0: p1(boot) p2(kernel)
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.rst
index 934c44ea0c57..4f2452a95c43 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.rst
@@ -1,5 +1,9 @@
-----------------------------------------------------------------------
-1. INTRODUCTION
+==============
+Data Integrity
+==============
+
+1. Introduction
+===============
 
 Modern filesystems feature checksumming of data and metadata to
 protect against data corruption.  However, the detection of the
@@ -28,8 +32,8 @@ integrity of the I/O and reject it if corruption is detected.  This
 allows not only corruption prevention but also isolation of the point
 of failure.
 
-----------------------------------------------------------------------
-2. THE DATA INTEGRITY EXTENSIONS
+2. The Data Integrity Extensions
+================================
 
 As written, the protocol extensions only protect the path between
 controller and storage device.  However, many controllers actually
@@ -75,8 +79,8 @@ Extensions.  As these extensions are outside the scope of the protocol
 bodies (T10, T13), Oracle and its partners are trying to standardize
 them within the Storage Networking Industry Association.
 
-----------------------------------------------------------------------
-3. KERNEL CHANGES
+3. Kernel Changes
+=================
 
 The data integrity framework in Linux enables protection information
 to be pinned to I/Os and sent to/received from controllers that
@@ -123,10 +127,11 @@ access to manipulate the tags from user space.  A passthrough
 interface for this is being worked on.
 
 
-----------------------------------------------------------------------
-4. BLOCK LAYER IMPLEMENTATION DETAILS
+4. Block Layer Implementation Details
+=====================================
 
-4.1 BIO
+4.1 Bio
+-------
 
 The data integrity patches add a new field to struct bio when
 CONFIG_BLK_DEV_INTEGRITY is enabled.  bio_integrity(bio) returns a
@@ -145,7 +150,8 @@ attached using bio_integrity_add_page().
 bio_free() will automatically free the bip.
 
 
-4.2 BLOCK DEVICE
+4.2 Block Device
+----------------
 
 Because the format of the protection data is tied to the physical
 disk, each block device has been extended with a block integrity
@@ -163,10 +169,11 @@ and MD linear, RAID0 and RAID1 are currently supported.  RAID4/5/6
 will require extra work due to the application tag.
 
 
-----------------------------------------------------------------------
-5.0 BLOCK LAYER INTEGRITY API
+5.0 Block Layer Integrity API
+=============================
 
-5.1 NORMAL FILESYSTEM
+5.1 Normal Filesystem
+---------------------
 
     The normal filesystem is unaware that the underlying block device
     is capable of sending/receiving integrity metadata.  The IMD will
@@ -174,25 +181,26 @@ will require extra work due to the application tag.
     in case of a WRITE.  A READ request will cause the I/O integrity
     to be verified upon completion.
 
-    IMD generation and verification can be toggled using the
+    IMD generation and verification can be toggled using the::
 
       /sys/block/<bdev>/integrity/write_generate
 
-    and
+    and::
 
       /sys/block/<bdev>/integrity/read_verify
 
     flags.
 
 
-5.2 INTEGRITY-AWARE FILESYSTEM
+5.2 Integrity-Aware Filesystem
+------------------------------
 
     A filesystem that is integrity-aware can prepare I/Os with IMD
     attached.  It can also use the application tag space if this is
     supported by the block device.
 
 
-    bool bio_integrity_prep(bio);
+    `bool bio_integrity_prep(bio);`
 
       To generate IMD for WRITE and to set up buffers for READ, the
       filesystem must call bio_integrity_prep(bio).
@@ -204,14 +212,15 @@ will require extra work due to the application tag.
       Complete bio with error if prepare failed for some reson.
 
 
-5.3 PASSING EXISTING INTEGRITY METADATA
+5.3 Passing Existing Integrity Metadata
+---------------------------------------
 
     Filesystems that either generate their own integrity metadata or
     are capable of transferring IMD from user space can use the
     following calls:
 
 
-    struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);
+    `struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);`
 
       Allocates the bio integrity payload and hangs it off of the bio.
       nr_pages indicate how many pages of protection data need to be
@@ -220,7 +229,7 @@ will require extra work due to the application tag.
       The integrity payload will be freed at bio_free() time.
 
 
-    int bio_integrity_add_page(bio, page, len, offset);
+    `int bio_integrity_add_page(bio, page, len, offset);`
 
       Attaches a page containing integrity metadata to an existing
       bio.  The bio must have an existing bip,
@@ -241,21 +250,21 @@ will require extra work due to the application tag.
       integrity upon completion.
 
 
-5.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY
-    METADATA
+5.4 Registering A Block Device As Capable Of Exchanging Integrity Metadata
+--------------------------------------------------------------------------
 
     To enable integrity exchange on a block device the gendisk must be
     registered as capable:
 
-    int blk_integrity_register(gendisk, blk_integrity);
+    `int blk_integrity_register(gendisk, blk_integrity);`
 
       The blk_integrity struct is a template and should contain the
-      following:
+      following::
 
         static struct blk_integrity my_profile = {
             .name                   = "STANDARDSBODY-TYPE-VARIANT-CSUM",
             .generate_fn            = my_generate_fn,
-       	    .verify_fn              = my_verify_fn,
+	    .verify_fn              = my_verify_fn,
 	    .tuple_size             = sizeof(struct my_tuple_size),
 	    .tag_size               = <tag bytes per hw sector>,
         };
@@ -278,4 +287,5 @@ will require extra work due to the application tag.
       0 depending on the value of the Control Mode Page ATO bit.
 
 ----------------------------------------------------------------------
+
 2007-12-24 Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.rst
index 2d82c80322cb..9f5c5a4c370e 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.rst
@@ -1,3 +1,4 @@
+==============================
 Deadline IO scheduler tunables
 ==============================
 
@@ -7,15 +8,13 @@ of interest to power users.
 
 Selecting IO schedulers
 -----------------------
-Refer to Documentation/block/switching-sched.txt for information on
+Refer to Documentation/block/switching-sched.rst for information on
 selecting an io scheduler on a per-device basis.
 
-
-********************************************************************************
-
+------------------------------------------------------------------------------
 
 read_expire	(in ms)
------------
+-----------------------
 
 The goal of the deadline io scheduler is to attempt to guarantee a start
 service time for a request. As we focus mainly on read latencies, this is
@@ -25,15 +24,15 @@ milliseconds.
 
 
 write_expire	(in ms)
------------
+-----------------------
 
 Similar to read_expire mentioned above, but for writes.
 
 
 fifo_batch	(number of requests)
-----------
+------------------------------------
 
-Requests are grouped into ``batches'' of a particular data direction (read or
+Requests are grouped into ``batches`` of a particular data direction (read or
 write) which are serviced in increasing sector order.  To limit extra seeking,
 deadline expiries are only checked between batches.  fifo_batch controls the
 maximum number of requests per batch.
@@ -45,7 +44,7 @@ generally improves throughput, at the cost of latency variation.
 
 
 writes_starved	(number of dispatches)
---------------
+--------------------------------------
 
 When we have to move requests from the io scheduler queue to the block
 device dispatch queue, we always give a preference to reads. However, we
@@ -56,7 +55,7 @@ same criteria as reads.
 
 
 front_merges	(bool)
-------------
+----------------------
 
 Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
@@ -71,5 +70,3 @@ rbtree front sector lookup when the io scheduler merge function is called.
 
 
 Nov 11 2002, Jens Axboe <jens.axboe@oracle.com>
-
-
diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst
new file mode 100644
index 000000000000..3fa7a52fafa4
--- /dev/null
+++ b/Documentation/block/index.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====
+Block
+=====
+
+.. toctree::
+   :maxdepth: 1
+
+   bfq-iosched
+   biodoc
+   biovecs
+   capability
+   cmdline-partition
+   data-integrity
+   deadline-iosched
+   ioprio
+   kyber-iosched
+   null_blk
+   pr
+   queue-sysfs
+   request
+   stat
+   switching-sched
+   writeback_cache_control
diff --git a/Documentation/block/ioprio.txt b/Documentation/block/ioprio.rst
index 8ed8c59380b4..f72b0de65af7 100644
--- a/Documentation/block/ioprio.txt
+++ b/Documentation/block/ioprio.rst
@@ -1,3 +1,4 @@
+===================
 Block io priorities
 ===================
 
@@ -40,81 +41,81 @@ class data, since it doesn't really apply here.
 Tools
 -----
 
-See below for a sample ionice tool. Usage:
+See below for a sample ionice tool. Usage::
 
-# ionice -c<class> -n<level> -p<pid>
+	# ionice -c<class> -n<level> -p<pid>
 
 If pid isn't given, the current process is assumed. IO priority settings
 are inherited on fork, so you can use ionice to start the process at a given
-level:
+level::
 
-# ionice -c2 -n0 /bin/ls
+	# ionice -c2 -n0 /bin/ls
 
 will run ls at the best-effort scheduling class at the highest priority.
-For a running process, you can give the pid instead:
+For a running process, you can give the pid instead::
 
-# ionice -c1 -n2 -p100
+	# ionice -c1 -n2 -p100
 
 will change pid 100 to run at the realtime scheduling class, at priority 2.
 
----> snip ionice.c tool <---
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <getopt.h>
-#include <unistd.h>
-#include <sys/ptrace.h>
-#include <asm/unistd.h>
-
-extern int sys_ioprio_set(int, int, int);
-extern int sys_ioprio_get(int, int);
-
-#if defined(__i386__)
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#elif defined(__ppc__)
-#define __NR_ioprio_set		273
-#define __NR_ioprio_get		274
-#elif defined(__x86_64__)
-#define __NR_ioprio_set		251
-#define __NR_ioprio_get		252
-#elif defined(__ia64__)
-#define __NR_ioprio_set		1274
-#define __NR_ioprio_get		1275
-#else
-#error "Unsupported arch"
-#endif
-
-static inline int ioprio_set(int which, int who, int ioprio)
-{
+ionice.c tool::
+
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <errno.h>
+  #include <getopt.h>
+  #include <unistd.h>
+  #include <sys/ptrace.h>
+  #include <asm/unistd.h>
+
+  extern int sys_ioprio_set(int, int, int);
+  extern int sys_ioprio_get(int, int);
+
+  #if defined(__i386__)
+  #define __NR_ioprio_set		289
+  #define __NR_ioprio_get		290
+  #elif defined(__ppc__)
+  #define __NR_ioprio_set		273
+  #define __NR_ioprio_get		274
+  #elif defined(__x86_64__)
+  #define __NR_ioprio_set		251
+  #define __NR_ioprio_get		252
+  #elif defined(__ia64__)
+  #define __NR_ioprio_set		1274
+  #define __NR_ioprio_get		1275
+  #else
+  #error "Unsupported arch"
+  #endif
+
+  static inline int ioprio_set(int which, int who, int ioprio)
+  {
 	return syscall(__NR_ioprio_set, which, who, ioprio);
-}
+  }
 
-static inline int ioprio_get(int which, int who)
-{
+  static inline int ioprio_get(int which, int who)
+  {
 	return syscall(__NR_ioprio_get, which, who);
-}
+  }
 
-enum {
+  enum {
 	IOPRIO_CLASS_NONE,
 	IOPRIO_CLASS_RT,
 	IOPRIO_CLASS_BE,
 	IOPRIO_CLASS_IDLE,
-};
+  };
 
-enum {
+  enum {
 	IOPRIO_WHO_PROCESS = 1,
 	IOPRIO_WHO_PGRP,
 	IOPRIO_WHO_USER,
-};
+  };
 
-#define IOPRIO_CLASS_SHIFT	13
+  #define IOPRIO_CLASS_SHIFT	13
 
-const char *to_prio[] = { "none", "realtime", "best-effort", "idle", };
+  const char *to_prio[] = { "none", "realtime", "best-effort", "idle", };
 
-int main(int argc, char *argv[])
-{
+  int main(int argc, char *argv[])
+  {
 	int ioprio = 4, set = 0, ioprio_class = IOPRIO_CLASS_BE;
 	int c, pid = 0;
 
@@ -175,9 +176,7 @@ int main(int argc, char *argv[])
 	}
 
 	return 0;
-}
-
----> snip ionice.c tool <---
+  }
 
 
 March 11 2005, Jens Axboe <jens.axboe@oracle.com>
diff --git a/Documentation/block/kyber-iosched.txt b/Documentation/block/kyber-iosched.rst
index e94feacd7edc..3e164dd0617c 100644
--- a/Documentation/block/kyber-iosched.txt
+++ b/Documentation/block/kyber-iosched.rst
@@ -1,5 +1,6 @@
+============================
 Kyber I/O scheduler tunables
-===========================
+============================
 
 The only two tunables for the Kyber scheduler are the target latencies for
 reads and synchronous writes. Kyber will throttle requests in order to meet
diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.rst
index 41f0a3d33bbd..31451d80783c 100644
--- a/Documentation/block/null_blk.txt
+++ b/Documentation/block/null_blk.rst
@@ -1,33 +1,43 @@
+========================
 Null block device driver
-================================================================================
+========================
 
-I. Overview
+1. Overview
+===========
 
 The null block device (/dev/nullb*) is used for benchmarking the various
 block-layer implementations. It emulates a block device of X gigabytes in size.
 The following instances are possible:
 
   Single-queue block-layer
+
     - Request-based.
     - Single submission queue per device.
     - Implements IO scheduling algorithms (CFQ, Deadline, noop).
+
   Multi-queue block-layer
+
     - Request-based.
     - Configurable submission queues per device.
+
   No block-layer (Known as bio-based)
+
     - Bio-based. IO requests are submitted directly to the device driver.
     - Directly accepts bio data structure and returns them.
 
 All of them have a completion queue for each core in the system.
 
-II. Module parameters applicable for all instances:
+2. Module parameters applicable for all instances
+=================================================
 
 queue_mode=[0-2]: Default: 2-Multi-queue
   Selects which block-layer the module should instantiate with.
 
-  0: Bio-based.
-  1: Single-queue.
-  2: Multi-queue.
+  =  ============
+  0  Bio-based
+  1  Single-queue
+  2  Multi-queue
+  =  ============
 
 home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
   Selects what CPU node the data structures are allocated from.
@@ -45,12 +55,14 @@ nr_devices=[Number of devices]: Default: 1
 irqmode=[0-2]: Default: 1-Soft-irq
   The completion mode used for completing IOs to the block-layer.
 
-  0: None.
-  1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+  =  ===========================================================================
+  0  None.
+  1  Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
      when IOs are issued from another CPU node than the home the device is
      connected to.
-  2: Timer: Waits a specific period (completion_nsec) for each IO before
+  2  Timer: Waits a specific period (completion_nsec) for each IO before
      completion.
+  =  ===========================================================================
 
 completion_nsec=[ns]: Default: 10,000ns
   Combined with irqmode=2 (timer). The time each completion event must wait.
@@ -66,30 +78,45 @@ hw_queue_depth=[0..qdepth]: Default: 64
 III: Multi-queue specific parameters
 
 use_per_node_hctx=[0/1]: Default: 0
-  0: The number of submit queues are set to the value of the submit_queues
+
+  =  =====================================================================
+  0  The number of submit queues are set to the value of the submit_queues
      parameter.
-  1: The multi-queue block layer is instantiated with a hardware dispatch
+  1  The multi-queue block layer is instantiated with a hardware dispatch
      queue for each CPU node in the system.
+  =  =====================================================================
 
 no_sched=[0/1]: Default: 0
-  0: nullb* use default blk-mq io scheduler.
-  1: nullb* doesn't use io scheduler.
+
+  =  ======================================
+  0  nullb* use default blk-mq io scheduler
+  1  nullb* doesn't use io scheduler
+  =  ======================================
 
 blocking=[0/1]: Default: 0
-  0: Register as a non-blocking blk-mq driver device.
-  1: Register as a blocking blk-mq driver device, null_blk will set
+
+  =  ===============================================================
+  0  Register as a non-blocking blk-mq driver device.
+  1  Register as a blocking blk-mq driver device, null_blk will set
      the BLK_MQ_F_BLOCKING flag, indicating that it sometimes/always
      needs to block in its ->queue_rq() function.
+  =  ===============================================================
 
 shared_tags=[0/1]: Default: 0
-  0: Tag set is not shared.
-  1: Tag set shared between devices for blk-mq. Only makes sense with
+
+  =  ================================================================
+  0  Tag set is not shared.
+  1  Tag set shared between devices for blk-mq. Only makes sense with
      nr_devices > 1, otherwise there's no tag set to share.
+  =  ================================================================
 
 zoned=[0/1]: Default: 0
-  0: Block device is exposed as a random-access block device.
-  1: Block device is exposed as a host-managed zoned block device. Requires
+
+  =  ======================================================================
+  0  Block device is exposed as a random-access block device.
+  1  Block device is exposed as a host-managed zoned block device. Requires
      CONFIG_BLK_DEV_ZONED.
+  =  ======================================================================
 
 zone_size=[MB]: Default: 256
   Per zone size when exposed as a zoned block device. Must be a power of two.
diff --git a/Documentation/block/pr.txt b/Documentation/block/pr.rst
index ac9b8e70e64b..30ea1c2e39eb 100644
--- a/Documentation/block/pr.txt
+++ b/Documentation/block/pr.rst
@@ -1,4 +1,4 @@
-
+===============================================
 Block layer support for Persistent Reservations
 ===============================================
 
@@ -23,22 +23,18 @@ The following types of reservations are supported:
 --------------------------------------------------
 
  - PR_WRITE_EXCLUSIVE
-
 	Only the initiator that owns the reservation can write to the
 	device.  Any initiator can read from the device.
 
  - PR_EXCLUSIVE_ACCESS
-
 	Only the initiator that owns the reservation can access the
 	device.
 
  - PR_WRITE_EXCLUSIVE_REG_ONLY
-
 	Only initiators with a registered key can write to the device,
 	Any initiator can read from the device.
 
  - PR_EXCLUSIVE_ACCESS_REG_ONLY
-
 	Only initiators with a registered key can access the device.
 
  - PR_WRITE_EXCLUSIVE_ALL_REGS
@@ -48,21 +44,21 @@ The following types of reservations are supported:
 	All initiators with a registered key are considered reservation
 	holders.
 	Please reference the SPC spec on the meaning of a reservation
-	holder if you want to use this type. 
+	holder if you want to use this type.
 
  - PR_EXCLUSIVE_ACCESS_ALL_REGS
-
 	Only initiators with a registered key can access the device.
 	All initiators with a registered key are considered reservation
 	holders.
 	Please reference the SPC spec on the meaning of a reservation
-	holder if you want to use this type. 
+	holder if you want to use this type.
 
 
 The following ioctl are supported:
 ----------------------------------
 
 1. IOC_PR_REGISTER
+^^^^^^^^^^^^^^^^^^
 
 This ioctl command registers a new reservation if the new_key argument
 is non-null.  If no existing reservation exists old_key must be zero,
@@ -74,6 +70,7 @@ in old_key.
 
 
 2. IOC_PR_RESERVE
+^^^^^^^^^^^^^^^^^
 
 This ioctl command reserves the device and thus restricts access for other
 devices based on the type argument.  The key argument must be the existing
@@ -82,12 +79,14 @@ IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands.
 
 
 3. IOC_PR_RELEASE
+^^^^^^^^^^^^^^^^^
 
 This ioctl command releases the reservation specified by key and flags
 and thus removes any access restriction implied by it.
 
 
 4. IOC_PR_PREEMPT
+^^^^^^^^^^^^^^^^^
 
 This ioctl command releases the existing reservation referred to by
 old_key and replaces it with a new reservation of type for the
@@ -95,11 +94,13 @@ reservation key new_key.
 
 
 5. IOC_PR_PREEMPT_ABORT
+^^^^^^^^^^^^^^^^^^^^^^^
 
 This ioctl command works like IOC_PR_PREEMPT except that it also aborts
 any outstanding command sent over a connection identified by old_key.
 
 6. IOC_PR_CLEAR
+^^^^^^^^^^^^^^^
 
 This ioctl command unregisters both key and any other reservation key
 registered with the device and drops any existing reservation.
@@ -111,7 +112,6 @@ Flags
 All the ioctls have a flag field.  Currently only one flag is supported:
 
  - PR_FL_IGNORE_KEY
-
 	Ignore the existing reservation key.  This is commonly supported for
 	IOC_PR_REGISTER, and some implementation may support the flag for
 	IOC_PR_RESERVE.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.rst
index b40b5b7cebd9..6a8513af9201 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.rst
@@ -1,3 +1,4 @@
+=================
 Queue sysfs files
 =================
 
@@ -10,7 +11,7 @@ Files denoted with a RO postfix are readonly and the RW postfix means
 read-write.
 
 add_random (RW)
-----------------
+---------------
 This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).
 
@@ -30,13 +31,13 @@ used by CPU-addressable storage to bypass the pagecache.  It shows '1'
 if true, '0' if not.
 
 discard_granularity (RO)
------------------------
+------------------------
 This shows the size of internal allocation of the device in bytes, if
 reported by the device. A value of '0' means device does not support
 the discard functionality.
 
 discard_max_hw_bytes (RO)
-----------------------
+-------------------------
 Devices that support discard functionality may have internal limits on
 the number of bytes that can be trimmed or unmapped in a single operation.
 The discard_max_bytes parameter is set by the device driver to the maximum
diff --git a/Documentation/block/request.txt b/Documentation/block/request.rst
index 754e104ed369..747021e1ffdb 100644
--- a/Documentation/block/request.txt
+++ b/Documentation/block/request.rst
@@ -1,26 +1,37 @@
-
+============================
 struct request documentation
+============================
 
 Jens Axboe <jens.axboe@oracle.com> 27/05/02
 
-1.0
-Index
 
-2.0 Struct request members classification
+.. FIXME:
+   No idea about what does mean - seems just some noise, so comment it
+
+   1.0
+   Index
+
+   2.0 Struct request members classification
+
+       2.1 struct request members explanation
 
-	2.1 struct request members explanation
+   3.0
+
+
+   2.0
 
-3.0
 
 
-2.0
 Short explanation of request members
+====================================
 
 Classification flags:
 
+	=	====================
 	D	driver member
 	B	block layer member
 	I	I/O scheduler member
+	=	====================
 
 Unless an entry contains a D classification, a device driver must not access
 this member. Some members may contain D classifications, but should only be
@@ -28,14 +39,13 @@ access through certain macros or functions (eg ->flags).
 
 <linux/blkdev.h>
 
-2.1
+=============================== ======= =======================================
 Member				Flag	Comment
-------				----	-------
-
+=============================== ======= =======================================
 struct list_head queuelist	BI	Organization on various internal
 					queues
 
-void *elevator_private		I	I/O scheduler private data
+``void *elevator_private``	I	I/O scheduler private data
 
 unsigned char cmd[16]		D	Driver can use this for setting up
 					a cdb before execution, see
@@ -71,18 +81,19 @@ unsigned int hard_cur_sectors	B	Used to keep current_nr_sectors sane
 
 int tag				DB	TCQ tag, if assigned
 
-void *special			D	Free to be used by driver
+``void *special``		D	Free to be used by driver
 
-char *buffer			D	Map of first segment, also see
+``char *buffer``		D	Map of first segment, also see
 					section on bouncing SECTION
 
-struct completion *waiting	D	Can be used by driver to get signalled
+``struct completion *waiting``	D	Can be used by driver to get signalled
 					on request completion
 
-struct bio *bio			DBI	First bio in request
+``struct bio *bio``		DBI	First bio in request
 
-struct bio *biotail		DBI	Last bio in request
+``struct bio *biotail``		DBI	Last bio in request
 
-struct request_queue *q		DB	Request queue this request belongs to
+``struct request_queue *q``	DB	Request queue this request belongs to
 
-struct request_list *rl		B	Request list this request came from
+``struct request_list *rl``	B	Request list this request came from
+=============================== ======= =======================================
diff --git a/Documentation/block/stat.txt b/Documentation/block/stat.rst
index 0aace9cc536c..9c07bc22b0bc 100644
--- a/Documentation/block/stat.txt
+++ b/Documentation/block/stat.rst
@@ -1,3 +1,4 @@
+===============================================
 Block layer statistics in /sys/block/<dev>/stat
 ===============================================
 
@@ -6,9 +7,12 @@ This file documents the contents of the /sys/block/<dev>/stat file.
 The stat file provides several statistics about the state of block
 device <dev>.
 
-Q. Why are there multiple statistics in a single file?  Doesn't sysfs
+Q.
+   Why are there multiple statistics in a single file?  Doesn't sysfs
    normally contain a single value per file?
-A. By having a single file, the kernel can guarantee that the statistics
+
+A.
+   By having a single file, the kernel can guarantee that the statistics
    represent a consistent snapshot of the state of the device.  If the
    statistics were exported as multiple files containing one statistic
    each, it would be impossible to guarantee that a set of readings
@@ -18,8 +22,10 @@ The stat file consists of a single line of text containing 11 decimal
 values separated by whitespace.  The fields are summarized in the
 following table, and described in more detail below.
 
+
+=============== ============= =================================================
 Name            units         description
-----            -----         -----------
+=============== ============= =================================================
 read I/Os       requests      number of read I/Os processed
 read merges     requests      number of read I/Os merged with in-queue I/O
 read sectors    sectors       number of sectors read
@@ -35,6 +41,7 @@ discard I/Os    requests      number of discard I/Os processed
 discard merges  requests      number of discard I/Os merged with in-queue I/O
 discard sectors sectors       number of sectors discarded
 discard ticks   milliseconds  total wait time for discard requests
+=============== ============= =================================================
 
 read I/Os, write I/Os, discard I/0s
 ===================================
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.rst
index 7977f6fb8b20..42042417380e 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.rst
@@ -1,35 +1,39 @@
+===================
+Switching Scheduler
+===================
+
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
 'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
 globally at boot time only presently.
 
 Each io queue has a set of io scheduler tunables associated with it. These
 tunables control how the io scheduler works. You can find these entries
-in:
+in::
 
-/sys/block/<device>/queue/iosched
+	/sys/block/<device>/queue/iosched
 
 assuming that you have sysfs mounted on /sys. If you don't have sysfs mounted,
-you can do so by typing:
+you can do so by typing::
 
-# mount none /sys -t sysfs
+	# mount none /sys -t sysfs
 
 It is possible to change the IO scheduler for a given block device on
 the fly to select one of mq-deadline, none, bfq, or kyber schedulers -
 which can improve that device's throughput.
 
-To set a specific scheduler, simply do this:
+To set a specific scheduler, simply do this::
 
-echo SCHEDNAME > /sys/block/DEV/queue/scheduler
+	echo SCHEDNAME > /sys/block/DEV/queue/scheduler
 
 where SCHEDNAME is the name of a defined IO scheduler, and DEV is the
 device name (hda, hdb, sga, or whatever you happen to have).
 
 The list of defined schedulers can be found by simply doing
 a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
-will be displayed, with the currently selected scheduler in brackets:
+will be displayed, with the currently selected scheduler in brackets::
 
-# cat /sys/block/sda/queue/scheduler
-[mq-deadline] kyber bfq none
-# echo none >/sys/block/sda/queue/scheduler
-# cat /sys/block/sda/queue/scheduler
-[none] mq-deadline kyber bfq
+  # cat /sys/block/sda/queue/scheduler
+  [mq-deadline] kyber bfq none
+  # echo none >/sys/block/sda/queue/scheduler
+  # cat /sys/block/sda/queue/scheduler
+  [none] mq-deadline kyber bfq
diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.rst
index 8a6bdada5f6b..2c752c57c14c 100644
--- a/Documentation/block/writeback_cache_control.txt
+++ b/Documentation/block/writeback_cache_control.rst
@@ -1,6 +1,6 @@
-
+==========================================
 Explicit volatile write back cache control
-=====================================
+==========================================
 
 Introduction
 ------------
@@ -31,7 +31,7 @@ the blkdev_issue_flush() helper for a pure cache flush.
 
 
 Forced Unit Access
------------------
+------------------
 
 The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the
 filesystem and will make sure that I/O completion for this request is only
@@ -62,14 +62,14 @@ flags themselves without any help from the block layer.
 
 
 Implementation details for request_fn based block drivers
---------------------------------------------------------------
+---------------------------------------------------------
 
 For devices that do not support volatile write caches there is no driver
 support required, the block layer completes empty REQ_PREFLUSH requests before
 entering the driver and strips off the REQ_PREFLUSH and REQ_FUA bits from
 requests that have a payload.  For devices with volatile write caches the
 driver needs to tell the block layer that it supports flushing caches by
-doing:
+doing::
 
 	blk_queue_write_cache(sdkp->disk->queue, true, false);
 
@@ -77,7 +77,7 @@ and handle empty REQ_OP_FLUSH requests in its prep_fn/request_fn.  Note that
 REQ_PREFLUSH requests with a payload are automatically turned into a sequence
 of an empty REQ_OP_FLUSH request followed by the actual write by the block
 layer.  For devices that also support the FUA bit the block layer needs
-to be told to pass through the REQ_FUA bit using:
+to be told to pass through the REQ_FUA bit using::
 
 	blk_queue_write_cache(sdkp->disk->queue, true, true);
 
diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst
index efbd5d111825..338ad5f94e7c 100644
--- a/Documentation/cdrom/index.rst
+++ b/Documentation/cdrom/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 =====
 cdrom
diff --git a/Documentation/gcc-plugins.txt b/Documentation/core-api/gcc-plugins.rst
index 8502f24396fb..8502f24396fb 100644
--- a/Documentation/gcc-plugins.txt
+++ b/Documentation/core-api/gcc-plugins.rst
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 322ac954b390..da0ed972d224 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -36,6 +36,7 @@ Core utilities
    memory-hotplug
    protection-keys
    ../RCU/index
+   gcc-plugins
 
 
 Interfaces for kernel debugging
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index 75d2bbe9813f..c6224d039bcb 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -119,7 +119,7 @@ Kernel Pointers
 
 For printing kernel pointers which should be hidden from unprivileged
 users. The behaviour of %pK depends on the kptr_restrict sysctl - see
-Documentation/sysctl/kernel.txt for more details.
+Documentation/admin-guide/sysctl/kernel.rst for more details.
 
 Unmodified Addresses
 --------------------
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index c9b9321434ea..db5c56db30ec 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -54,7 +54,7 @@ hypervisor {
 };
 
 The format and meaning of the "xen,uefi-*" parameters are similar to those in
-Documentation/arm/uefi.txt, which are provided by the regular UEFI stub. However
+Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However
 they differ because they are provided by the Xen hypervisor, together with a set
 of UEFI runtime services implemented via hypercalls, see
 http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt
index a403b81d0679..c4eb38902533 100644
--- a/Documentation/devicetree/bindings/phy/phy-bindings.txt
+++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -1,5 +1,5 @@
 This document explains only the device tree data binding. For general
-information about PHY subsystem refer to Documentation/phy.txt
+information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst
 
 PHY device node
 ===============
diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
index 93fc09c12954..d80e36a77ec5 100644
--- a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
@@ -15,4 +15,4 @@ Example:
 	};
 
 This document explains the device tree binding. For general
-information about PHY subsystem refer to Documentation/phy.txt
+information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 60f8640f2b2f..4660ccee35a3 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -160,7 +160,7 @@ it with special cases.
    of the kernel image. That entry point supports two calling
    conventions.  A summary of the interface is described here.  A full
    description of the boot requirements is documented in
-   Documentation/arm/Booting
+   Documentation/arm/booting.rst
 
         a) ATAGS interface.  Minimal information is passed from firmware
         to the kernel with a tagged list of predefined parameters.
@@ -174,7 +174,7 @@ it with special cases.
         b) Entry with a flattened device-tree block.  Firmware loads the
         physical address of the flattened device tree block (dtb) into r2,
         r1 is not used, but it is considered good practice to use a valid
-        machine number as described in Documentation/arm/Booting.
+        machine number as described in Documentation/arm/booting.rst.
 
                 r0 : 0
 
diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst
new file mode 100644
index 000000000000..1e0b224fc397
--- /dev/null
+++ b/Documentation/driver-api/backlight/lp855x-driver.rst
@@ -0,0 +1,81 @@
+====================
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	LP8557
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+  Brightness can be controlled by the pwm input or the i2c command.
+  The lp855x driver supports both cases.
+
+* Device attributes
+
+  1) bl_ctl_mode
+
+  Backlight control mode.
+
+  Value: pwm based or register based
+
+  2) chip_id
+
+  The lp855x chip id.
+
+  Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name:
+	Backlight driver name. If it is not defined, default name is set.
+* device_control:
+	Value of DEVICE CONTROL register.
+* initial_brightness:
+	Initial value of backlight brightness.
+* period_ns:
+	Platform specific PWM period value. unit is nano.
+	Only valid when brightness is pwm input mode.
+* size_program:
+	Total size of lp855x_rom_data.
+* rom_data:
+	List of new eeprom/eprom registers.
+
+Examples
+========
+
+1) lp8552 platform data: i2c register mode with new eeprom data::
+
+    #define EEPROM_A5_ADDR	0xA5
+    #define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
+
+    static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
+    };
+
+    static struct lp855x_platform_data lp8552_pdata = {
+	.name = "lcd-bl",
+	.device_control = I2C_CONFIG(LP8552),
+	.initial_brightness = INITIAL_BRT,
+	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+	.rom_data = lp8552_eeprom_arr,
+    };
+
+2) lp8556 platform data: pwm input mode with default rom data::
+
+    static struct lp855x_platform_data lp8556_pdata = {
+	.device_control = PWM_CONFIG(LP8556),
+	.initial_brightness = INITIAL_BRT,
+	.period_ns = 1000000,
+    };
diff --git a/Documentation/bt8xxgpio.txt b/Documentation/driver-api/bt8xxgpio.rst
index a845feb074de..a845feb074de 100644
--- a/Documentation/bt8xxgpio.txt
+++ b/Documentation/driver-api/bt8xxgpio.rst
diff --git a/Documentation/connector/connector.txt b/Documentation/driver-api/connector.rst
index ab7ca897fab7..c100c7482289 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/driver-api/connector.rst
@@ -1,6 +1,8 @@
-/*****************************************/
-Kernel Connector.
-/*****************************************/
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Kernel Connector
+================
 
 Kernel connector - new netlink based userspace <-> kernel space easy
 to use communication module.
@@ -12,94 +14,55 @@ identifier, the appropriate callback will be called.
 
 From the userspace point of view it's quite straightforward:
 
-	socket();
-	bind();
-	send();
-	recv();
+	- socket();
+	- bind();
+	- send();
+	- recv();
 
 But if kernelspace wants to use the full power of such connections, the
 driver writer must create special sockets, must know about struct sk_buff
 handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
-easier way:
+easier way::
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
-void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
-void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
+  int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+  void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
+  void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
 
-struct cb_id
-{
+  struct cb_id
+  {
 	__u32			idx;
 	__u32			val;
-};
+  };
 
 idx and val are unique identifiers which must be registered in the
-connector.h header for in-kernel usage.  void (*callback) (void *) is a
+connector.h header for in-kernel usage.  `void (*callback) (void *)` is a
 callback function which will be called when a message with above idx.val
 is received by the connector core.  The argument for that function must
-be dereferenced to struct cn_msg *.
+be dereferenced to `struct cn_msg *`::
 
-struct cn_msg
-{
+  struct cn_msg
+  {
 	struct cb_id		id;
 
 	__u32			seq;
 	__u32			ack;
 
-	__u32			len;		/* Length of the following data */
+	__u32			len;	/* Length of the following data */
 	__u8			data[0];
-};
-
-/*****************************************/
-Connector interfaces.
-/*****************************************/
-
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
-
- Registers new callback with connector core.
-
- struct cb_id *id		- unique connector's user identifier.
-				  It must be registered in connector.h for legal in-kernel users.
- char *name			- connector's callback symbolic name.
- void (*callback) (struct cn..)	- connector's callback.
-				  cn_msg and the sender's credentials
-
-
-void cn_del_callback(struct cb_id *id);
-
- Unregisters new callback with connector core.
-
- struct cb_id *id		- unique connector's user identifier.
-
-
-int cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __groups, int gfp_mask);
-int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __groups, int gfp_mask);
+  };
 
- Sends message to the specified groups.  It can be safely called from
- softirq context, but may silently fail under strong memory pressure.
- If there are no listeners for given group -ESRCH can be returned.
+Connector interfaces
+====================
 
- struct cn_msg *		- message header(with attached data).
- u16 len			- for *_multi multiple cn_msg messages can be sent
- u32 port			- destination port.
- 				  If non-zero the message will be sent to the
-				  given port, which should be set to the
-				  original sender.
- u32 __group			- destination group.
-				  If port and __group is zero, then appropriate group will
-				  be searched through all registered connector users,
-				  and message will be delivered to the group which was
-				  created for user with the same ID as in msg.
-				  If __group is not zero, then message will be delivered
-				  to the specified group.
- int gfp_mask			- GFP mask.
+ .. kernel-doc:: include/linux/connector.h
 
- Note: When registering new callback user, connector core assigns
- netlink group to the user which is equal to its id.idx.
+ Note:
+   When registering new callback user, connector core assigns
+   netlink group to the user which is equal to its id.idx.
 
-/*****************************************/
-Protocol description.
-/*****************************************/
+Protocol description
+====================
 
 The current framework offers a transport layer with fixed headers.  The
 recommended protocol which uses such a header is as following:
@@ -132,9 +95,8 @@ driver (it also registers itself with id={-1, -1}).
 As example of this usage can be found in the cn_test.c module which
 uses the connector to request notification and to send messages.
 
-/*****************************************/
-Reliability.
-/*****************************************/
+Reliability
+===========
 
 Netlink itself is not a reliable protocol.  That means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
@@ -142,32 +104,31 @@ so caller is warned that it must be prepared.  That is why the struct
 cn_msg [main connector's message header] contains u32 seq and u32 ack
 fields.
 
-/*****************************************/
-Userspace usage.
-/*****************************************/
+Userspace usage
+===============
 
 2.6.14 has a new netlink socket implementation, which by default does not
 allow people to send data to netlink groups other than 1.
 So, if you wish to use a netlink socket (for example using connector)
 with a different group number, the userspace application must subscribe to
-that group first.  It can be achieved by the following pseudocode:
+that group first.  It can be achieved by the following pseudocode::
 
-s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+  s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 
-l_local.nl_family = AF_NETLINK;
-l_local.nl_groups = 12345;
-l_local.nl_pid = 0;
+  l_local.nl_family = AF_NETLINK;
+  l_local.nl_groups = 12345;
+  l_local.nl_pid = 0;
 
-if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+  if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
 	perror("bind");
 	close(s);
 	return -1;
-}
+  }
 
-{
+  {
 	int on = l_local.nl_groups;
 	setsockopt(s, 270, 1, &on, sizeof(on));
-}
+  }
 
 Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
 option.  To drop a multicast subscription, one should call the above socket
@@ -180,16 +141,15 @@ group number 12345, you must increment CN_NETLINK_USERS to that number.
 Additional 0xf numbers are allocated to be used by non-in-kernel users.
 
 Due to this limitation, group 0xffffffff does not work now, so one can
-not use add/remove connector's group notifications, but as far as I know, 
+not use add/remove connector's group notifications, but as far as I know,
 only cn_test.c test module used it.
 
 Some work in netlink area is still being done, so things can be changed in
 2.6.15 timeframe, if it will happen, documentation will be updated for that
 kernel.
 
-/*****************************************/
 Code samples
-/*****************************************/
+============
 
 Sample code for a connector test module and user space can be found
 in samples/connector/. To build this code, enable CONFIG_CONNECTOR
diff --git a/Documentation/console/console.txt b/Documentation/driver-api/console.rst
index d73c2ab4beda..8394ad7747ac 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/driver-api/console.rst
@@ -1,3 +1,6 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
 Console Drivers
 ===============
 
@@ -17,25 +20,26 @@ of driver occupying the consoles.) They can only take over the console that is
 occupied by the system driver. In the same token, if the modular driver is
 released by the console, the system driver will take over.
 
-Modular drivers, from the programmer's point of view, have to call:
+Modular drivers, from the programmer's point of view, have to call::
 
 	 do_take_over_console() - load and bind driver to console layer
 	 give_up_console() - unload driver; it will only work if driver
 			     is fully unbound
 
-In newer kernels, the following are also available:
+In newer kernels, the following are also available::
 
 	 do_register_con_driver()
 	 do_unregister_con_driver()
 
 If sysfs is enabled, the contents of /sys/class/vtconsole can be
 examined. This shows the console backends currently registered by the
-system which are named vtcon<n> where <n> is an integer from 0 to 15. Thus:
+system which are named vtcon<n> where <n> is an integer from 0 to 15.
+Thus::
 
        ls /sys/class/vtconsole
        .  ..  vtcon0  vtcon1
 
-Each directory in /sys/class/vtconsole has 3 files:
+Each directory in /sys/class/vtconsole has 3 files::
 
      ls /sys/class/vtconsole/vtcon0
      .  ..  bind  name  uevent
@@ -46,27 +50,29 @@ What do these files signify?
         read, or acts to bind or unbind the driver to the virtual consoles
         when written to. The possible values are:
 
-	0 - means the driver is not bound and if echo'ed, commands the driver
+	0
+	  - means the driver is not bound and if echo'ed, commands the driver
 	    to unbind
 
-        1 - means the driver is bound and if echo'ed, commands the driver to
+        1
+	  - means the driver is bound and if echo'ed, commands the driver to
 	    bind
 
-     2. name - read-only file. Shows the name of the driver in this format:
+     2. name - read-only file. Shows the name of the driver in this format::
 
-	cat /sys/class/vtconsole/vtcon0/name
-	(S) VGA+
+	  cat /sys/class/vtconsole/vtcon0/name
+	  (S) VGA+
 
-	    '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
-	    commanded to bind or unbind
+	      '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
+	      commanded to bind or unbind
 
-	    'VGA+' is the name of the driver
+	      'VGA+' is the name of the driver
 
-	cat /sys/class/vtconsole/vtcon1/name
-	(M) frame buffer device
+	  cat /sys/class/vtconsole/vtcon1/name
+	  (M) frame buffer device
 
-	    In this case, '(M)' stands for a (M)odular driver, one that can be
-	    directly commanded to bind or unbind.
+	      In this case, '(M)' stands for a (M)odular driver, one that can be
+	      directly commanded to bind or unbind.
 
      3. uevent - ignore this file
 
@@ -75,14 +81,17 @@ driver takes over the consoles vacated by the driver. Binding, on the other
 hand, will bind the driver to the consoles that are currently occupied by a
 system driver.
 
-NOTE1: Binding and unbinding must be selected in Kconfig. It's under:
+NOTE1:
+  Binding and unbinding must be selected in Kconfig. It's under::
 
-Device Drivers -> Character devices -> Support for binding and unbinding
-console drivers
+    Device Drivers ->
+	Character devices ->
+		Support for binding and unbinding console drivers
 
-NOTE2: If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
-unbinding will not succeed. An example of an application that sets the console
-to KD_GRAPHICS is X.
+NOTE2:
+  If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
+  unbinding will not succeed. An example of an application that sets the
+  console to KD_GRAPHICS is X.
 
 How useful is this feature? This is very useful for console driver
 developers. By unbinding the driver from the console layer, one can unload the
@@ -92,10 +101,10 @@ framebuffer console to VGA console and vice versa, this feature also makes
 this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
 for more details.)
 
-Notes for developers:
-=====================
+Notes for developers
+====================
 
-do_take_over_console() is now broken up into:
+do_take_over_console() is now broken up into::
 
      do_register_con_driver()
      do_bind_con_driver() - private function
@@ -104,7 +113,7 @@ give_up_console() is a wrapper to do_unregister_con_driver(), and a driver must
 be fully unbound for this call to succeed. con_is_bound() will check if the
 driver is bound or not.
 
-Guidelines for console driver writers:
+Guidelines for console driver writers
 =====================================
 
 In order for binding to and unbinding from the console to properly work,
@@ -140,6 +149,4 @@ The current crop of console drivers should still work correctly, but binding
 and unbinding them may cause problems. With minimal fixes, these drivers can
 be made to work correctly.
 
-==========================
 Antonino Daplas <adaplas@pol.net>
-
diff --git a/Documentation/dcdbas.txt b/Documentation/driver-api/dcdbas.rst
index 309cc57a7c1c..309cc57a7c1c 100644
--- a/Documentation/dcdbas.txt
+++ b/Documentation/driver-api/dcdbas.rst
diff --git a/Documentation/dell_rbu.txt b/Documentation/driver-api/dell_rbu.rst
index 5d1ce7bcd04d..5d1ce7bcd04d 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/driver-api/dell_rbu.rst
diff --git a/Documentation/driver-model/binding.rst b/Documentation/driver-api/driver-model/binding.rst
index 7ea1d7a41e1d..7ea1d7a41e1d 100644
--- a/Documentation/driver-model/binding.rst
+++ b/Documentation/driver-api/driver-model/binding.rst
diff --git a/Documentation/driver-model/bus.rst b/Documentation/driver-api/driver-model/bus.rst
index 016b15a6e8ea..016b15a6e8ea 100644
--- a/Documentation/driver-model/bus.rst
+++ b/Documentation/driver-api/driver-model/bus.rst
diff --git a/Documentation/driver-model/class.rst b/Documentation/driver-api/driver-model/class.rst
index fff55b80e86a..fff55b80e86a 100644
--- a/Documentation/driver-model/class.rst
+++ b/Documentation/driver-api/driver-model/class.rst
diff --git a/Documentation/driver-model/design-patterns.rst b/Documentation/driver-api/driver-model/design-patterns.rst
index 41eb8f41f7dd..41eb8f41f7dd 100644
--- a/Documentation/driver-model/design-patterns.rst
+++ b/Documentation/driver-api/driver-model/design-patterns.rst
diff --git a/Documentation/driver-model/device.rst b/Documentation/driver-api/driver-model/device.rst
index 2b868d49d349..2b868d49d349 100644
--- a/Documentation/driver-model/device.rst
+++ b/Documentation/driver-api/driver-model/device.rst
diff --git a/Documentation/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index 4ac99122b5f1..4ac99122b5f1 100644
--- a/Documentation/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
diff --git a/Documentation/driver-model/driver.rst b/Documentation/driver-api/driver-model/driver.rst
index 11d281506a04..11d281506a04 100644
--- a/Documentation/driver-model/driver.rst
+++ b/Documentation/driver-api/driver-model/driver.rst
diff --git a/Documentation/driver-model/index.rst b/Documentation/driver-api/driver-model/index.rst
index 9f85d579ce56..755016422269 100644
--- a/Documentation/driver-model/index.rst
+++ b/Documentation/driver-api/driver-model/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ============
 Driver Model
 ============
diff --git a/Documentation/driver-model/overview.rst b/Documentation/driver-api/driver-model/overview.rst
index d4d1e9b40e0c..d4d1e9b40e0c 100644
--- a/Documentation/driver-model/overview.rst
+++ b/Documentation/driver-api/driver-model/overview.rst
diff --git a/Documentation/driver-model/platform.rst b/Documentation/driver-api/driver-model/platform.rst
index 334dd4071ae4..334dd4071ae4 100644
--- a/Documentation/driver-model/platform.rst
+++ b/Documentation/driver-api/driver-model/platform.rst
diff --git a/Documentation/driver-model/porting.rst b/Documentation/driver-api/driver-model/porting.rst
index ae4bf843c1d6..931ea879af3f 100644
--- a/Documentation/driver-model/porting.rst
+++ b/Documentation/driver-api/driver-model/porting.rst
@@ -9,7 +9,7 @@ Patrick Mochel
 
 Overview
 
-Please refer to `Documentation/driver-model/*.rst` for definitions of
+Please refer to `Documentation/driver-api/driver-model/*.rst` for definitions of
 various driver types and concepts.
 
 Most of the work of porting devices drivers to the new model happens
diff --git a/Documentation/early-userspace/buffer-format.txt b/Documentation/driver-api/early-userspace/buffer-format.rst
index e1fd7f9dad16..7f74e301fdf3 100644
--- a/Documentation/early-userspace/buffer-format.txt
+++ b/Documentation/driver-api/early-userspace/buffer-format.rst
@@ -1,8 +1,10 @@
-		       initramfs buffer format
-		       -----------------------
+=======================
+initramfs buffer format
+=======================
 
-		       Al Viro, H. Peter Anvin
-		      Last revision: 2002-01-13
+Al Viro, H. Peter Anvin
+
+Last revision: 2002-01-13
 
 Starting with kernel 2.5.x, the old "initial ramdisk" protocol is
 getting {replaced/complemented} with the new "initial ramfs"
@@ -18,7 +20,8 @@ archive can be compressed using gzip(1).  One valid version of an
 initramfs buffer is thus a single .cpio.gz file.
 
 The full format of the initramfs buffer is defined by the following
-grammar, where:
+grammar, where::
+
 	*	is used to indicate "0 or more occurrences of"
 	(|)	indicates alternatives
 	+	indicates concatenation
@@ -49,7 +52,9 @@ hexadecimal ASCII numbers fully padded with '0' on the left to the
 full width of the field, for example, the integer 4780 is represented
 by the ASCII string "000012ac"):
 
+============= ================== ==============================================
 Field name    Field size	 Meaning
+============= ================== ==============================================
 c_magic	      6 bytes		 The string "070701" or "070702"
 c_ino	      8 bytes		 File inode number
 c_mode	      8 bytes		 File mode and permissions
@@ -65,6 +70,7 @@ c_rmin	      8 bytes		 Minor part of device node reference
 c_namesize    8 bytes		 Length of filename, including final \0
 c_chksum      8 bytes		 Checksum of data field if c_magic is 070702;
 				 otherwise zero
+============= ================== ==============================================
 
 The c_mode field matches the contents of st_mode returned by stat(2)
 on Linux, and encodes the file type and file permissions.
@@ -82,7 +88,8 @@ If the filename is "TRAILER!!!" this is actually an end-of-archive
 marker; the c_filesize for an end-of-archive marker must be zero.
 
 
-*** Handling of hard links
+Handling of hard links
+======================
 
 When a nondirectory with c_nlink > 1 is seen, the (c_maj,c_min,c_ino)
 tuple is looked up in a tuple buffer.  If not found, it is entered in
diff --git a/Documentation/early-userspace/README b/Documentation/driver-api/early-userspace/early_userspace_support.rst
index 955d667dc87e..3deefb34046b 100644
--- a/Documentation/early-userspace/README
+++ b/Documentation/driver-api/early-userspace/early_userspace_support.rst
@@ -1,3 +1,4 @@
+=======================
 Early userspace support
 =======================
 
@@ -26,6 +27,7 @@ archive to be used as the image or have the kernel build process build
 the image from specifications.
 
 CPIO ARCHIVE method
+-------------------
 
 You can create a cpio archive that contains the early userspace image.
 Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
@@ -34,6 +36,7 @@ CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
 combination with a cpio archive.
 
 IMAGE BUILDING method
+---------------------
 
 The kernel build process can also build an early userspace image from
 source parts rather than supplying a cpio archive.  This method provides
diff --git a/Documentation/driver-api/early-userspace/index.rst b/Documentation/driver-api/early-userspace/index.rst
new file mode 100644
index 000000000000..149c1822f06d
--- /dev/null
+++ b/Documentation/driver-api/early-userspace/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Early Userspace
+===============
+
+.. toctree::
+    :maxdepth: 1
+
+    early_userspace_support
+    buffer-format
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/EDID/howto.rst b/Documentation/driver-api/edid.rst
index 725fd49a88ca..b1b5acd501ed 100644
--- a/Documentation/EDID/howto.rst
+++ b/Documentation/driver-api/edid.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ====
 EDID
diff --git a/Documentation/eisa.txt b/Documentation/driver-api/eisa.rst
index f388545a85a7..c07565ba57da 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/driver-api/eisa.rst
@@ -103,7 +103,7 @@ id_table	an array of NULL terminated EISA id strings,
 		(driver_data).
 
 driver		a generic driver, such as described in
-		Documentation/driver-model/driver.rst. Only .name,
+		Documentation/driver-api/driver-model/driver.rst. Only .name,
 		.probe and .remove members are mandatory.
 =============== ====================================================
 
@@ -152,7 +152,7 @@ state    set of flags indicating the state of the device. Current
 	 flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
 res	 set of four 256 bytes I/O regions allocated to this device
 dma_mask DMA mask set from the parent device.
-dev	 generic device (see Documentation/driver-model/device.rst)
+dev	 generic device (see Documentation/driver-api/driver-model/device.rst)
 ======== ============================================================
 
 You can get the 'struct eisa_device' from 'struct device' using the
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 349f2dc33029..921c71a3d683 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -399,7 +399,7 @@ symbol:
   will pass the struct gpio_chip* for the chip to all IRQ callbacks, so the
   callbacks need to embed the gpio_chip in its state container and obtain a
   pointer to the container using container_of().
-  (See Documentation/driver-model/design-patterns.rst)
+  (See Documentation/driver-api/driver-model/design-patterns.rst)
 
 - gpiochip_irqchip_add_nested(): adds a nested cascaded irqchip to a gpiochip,
   as discussed above regarding different types of cascaded irqchips. The
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 6cd750a03ea0..d12a80f386a6 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -14,8 +14,10 @@ available subsections can be seen below.
 .. toctree::
    :maxdepth: 2
 
+   driver-model/index
    basics
    infrastructure
+   early-userspace/index
    pm/index
    clk
    device-io
@@ -36,6 +38,7 @@ available subsections can be seen below.
    i2c
    ipmb
    i3c/index
+   interconnect
    hsi
    edac
    scsi
@@ -44,8 +47,11 @@ available subsections can be seen below.
    mtdnand
    miscellaneous
    mei/index
+   mtd/index
+   mmc/index
+   nvdimm/index
    w1
-   rapidio
+   rapidio/index
    s390-drivers
    vme
    80211/index
@@ -53,13 +59,48 @@ available subsections can be seen below.
    firmware/index
    pinctl
    gpio/index
+   md/index
    misc_devices
+   nfc/index
    dmaengine/index
    slimbus
    soundwire/index
    fpga/index
    acpi/index
+   backlight/lp855x-driver.rst
+   bt8xxgpio
+   connector
+   console
+   dcdbas
+   dell_rbu
+   edid
+   eisa
+   isa
+   isapnp
    generic-counter
+   lightnvm-pblk
+   memory-devices/index
+   men-chameleon-bus
+   ntb
+   nvmem
+   parport-lowlevel
+   pps
+   ptp
+   phy/index
+   pti_intel_mid
+   pwm
+   rfkill
+   serial/index
+   sgi-ioc4
+   sm501
+   smsc_ece1099
+   switchtec
+   sync_file
+   vfio-mediated-device
+   vfio
+   xilinx/index
+   xillybus
+   zorro
 
 .. only::  subproject and html
 
diff --git a/Documentation/interconnect/interconnect.rst b/Documentation/driver-api/interconnect.rst
index 56e331dab70e..c3e004893796 100644
--- a/Documentation/interconnect/interconnect.rst
+++ b/Documentation/driver-api/interconnect.rst
@@ -1,7 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-:orphan:
-
 =====================================
 GENERIC SYSTEM INTERCONNECT SUBSYSTEM
 =====================================
diff --git a/Documentation/isa.txt b/Documentation/driver-api/isa.rst
index def4a7b690b5..def4a7b690b5 100644
--- a/Documentation/isa.txt
+++ b/Documentation/driver-api/isa.rst
diff --git a/Documentation/isapnp.txt b/Documentation/driver-api/isapnp.rst
index 8d0840ac847b..8d0840ac847b 100644
--- a/Documentation/isapnp.txt
+++ b/Documentation/driver-api/isapnp.rst
diff --git a/Documentation/lightnvm/pblk.txt b/Documentation/driver-api/lightnvm-pblk.rst
index 1040ed1cec81..1040ed1cec81 100644
--- a/Documentation/lightnvm/pblk.txt
+++ b/Documentation/driver-api/lightnvm-pblk.rst
diff --git a/Documentation/driver-api/md/index.rst b/Documentation/driver-api/md/index.rst
new file mode 100644
index 000000000000..18f54a7d7d6e
--- /dev/null
+++ b/Documentation/driver-api/md/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+RAID
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   md-cluster
+   raid5-cache
+   raid5-ppl
diff --git a/Documentation/md/md-cluster.txt b/Documentation/driver-api/md/md-cluster.rst
index e1055f105cf5..96eb52cec7eb 100644
--- a/Documentation/md/md-cluster.txt
+++ b/Documentation/driver-api/md/md-cluster.rst
@@ -1,19 +1,24 @@
+==========
+MD Cluster
+==========
+
 The cluster MD is a shared-device RAID for a cluster, it supports
 two levels: raid1 and raid10 (limited support).
 
 
 1. On-disk format
+=================
 
 Separate write-intent-bitmaps are used for each cluster node.
 The bitmaps record all writes that may have been started on that node,
-and may not yet have finished. The on-disk layout is:
+and may not yet have finished. The on-disk layout is::
 
-0                    4k                     8k                    12k
--------------------------------------------------------------------
-| idle                | md super            | bm super [0] + bits |
-| bm bits[0, contd]   | bm super[1] + bits  | bm bits[1, contd]   |
-| bm super[2] + bits  | bm bits [2, contd]  | bm super[3] + bits  |
-| bm bits [3, contd]  |                     |                     |
+  0                    4k                     8k                    12k
+  -------------------------------------------------------------------
+  | idle                | md super            | bm super [0] + bits |
+  | bm bits[0, contd]   | bm super[1] + bits  | bm bits[1, contd]   |
+  | bm super[2] + bits  | bm bits [2, contd]  | bm super[3] + bits  |
+  | bm bits [3, contd]  |                     |                     |
 
 During "normal" functioning we assume the filesystem ensures that only
 one node writes to any given block at a time, so a write request will
@@ -28,10 +33,12 @@ node) is writing.
 
 
 2. DLM Locks for management
+===========================
 
 There are three groups of locks for managing the device:
 
 2.1 Bitmap lock resource (bm_lockres)
+-------------------------------------
 
  The bm_lockres protects individual node bitmaps. They are named in
  the form bitmap000 for node 1, bitmap001 for node 2 and so on. When a
@@ -48,6 +55,7 @@ There are three groups of locks for managing the device:
  joins the cluster.
 
 2.2 Message passing locks
+-------------------------
 
  Each node has to communicate with other nodes when starting or ending
  resync, and for metadata superblock updates.  This communication is
@@ -55,116 +63,155 @@ There are three groups of locks for managing the device:
  with the Lock Value Block (LVB) of one of the "message" lock.
 
 2.3 new-device management
+-------------------------
 
  A single lock: "no-new-dev" is used to co-ordinate the addition of
  new devices - this must be synchronized across the array.
  Normally all nodes hold a concurrent-read lock on this device.
 
 3. Communication
+================
 
  Messages can be broadcast to all nodes, and the sender waits for all
  other nodes to acknowledge the message before proceeding.  Only one
  message can be processed at a time.
 
 3.1 Message Types
+-----------------
 
  There are six types of messages which are passed:
 
- 3.1.1 METADATA_UPDATED: informs other nodes that the metadata has
+3.1.1 METADATA_UPDATED
+^^^^^^^^^^^^^^^^^^^^^^
+
+   informs other nodes that the metadata has
    been updated, and the node must re-read the md superblock. This is
    performed synchronously. It is primarily used to signal device
    failure.
 
- 3.1.2 RESYNCING: informs other nodes that a resync is initiated or
+3.1.2 RESYNCING
+^^^^^^^^^^^^^^^
+   informs other nodes that a resync is initiated or
    ended so that each node may suspend or resume the region.  Each
    RESYNCING message identifies a range of the devices that the
    sending node is about to resync. This overrides any previous
    notification from that node: only one ranged can be resynced at a
    time per-node.
 
- 3.1.3 NEWDISK: informs other nodes that a device is being added to
+3.1.3 NEWDISK
+^^^^^^^^^^^^^
+
+   informs other nodes that a device is being added to
    the array. Message contains an identifier for that device.  See
    below for further details.
 
- 3.1.4 REMOVE: A failed or spare device is being removed from the
+3.1.4 REMOVE
+^^^^^^^^^^^^
+
+   A failed or spare device is being removed from the
    array. The slot-number of the device is included in the message.
 
- 3.1.5 RE_ADD: A failed device is being re-activated - the assumption
+ 3.1.5 RE_ADD:
+
+   A failed device is being re-activated - the assumption
    is that it has been determined to be working again.
 
- 3.1.6 BITMAP_NEEDS_SYNC: if a node is stopped locally but the bitmap
+ 3.1.6 BITMAP_NEEDS_SYNC:
+
+   If a node is stopped locally but the bitmap
    isn't clean, then another node is informed to take the ownership of
    resync.
 
 3.2 Communication mechanism
+---------------------------
 
  The DLM LVB is used to communicate within nodes of the cluster. There
  are three resources used for the purpose:
 
-  3.2.1 token: The resource which protects the entire communication
+3.2.1 token
+^^^^^^^^^^^
+   The resource which protects the entire communication
    system. The node having the token resource is allowed to
    communicate.
 
-  3.2.2 message: The lock resource which carries the data to
-   communicate.
+3.2.2 message
+^^^^^^^^^^^^^
+   The lock resource which carries the data to communicate.
 
-  3.2.3 ack: The resource, acquiring which means the message has been
+3.2.3 ack
+^^^^^^^^^
+
+   The resource, acquiring which means the message has been
    acknowledged by all nodes in the cluster. The BAST of the resource
    is used to inform the receiving node that a node wants to
    communicate.
 
 The algorithm is:
 
- 1. receive status - all nodes have concurrent-reader lock on "ack".
+ 1. receive status - all nodes have concurrent-reader lock on "ack"::
+
+	sender                         receiver                 receiver
+	"ack":CR                       "ack":CR                 "ack":CR
 
-   sender                         receiver                 receiver
-   "ack":CR                       "ack":CR                 "ack":CR
+ 2. sender get EX on "token",
+    sender get EX on "message"::
 
- 2. sender get EX on "token"
-    sender get EX on "message"
-    sender                        receiver                 receiver
-    "token":EX                    "ack":CR                 "ack":CR
-    "message":EX
-    "ack":CR
+	sender                        receiver                 receiver
+	"token":EX                    "ack":CR                 "ack":CR
+	"message":EX
+	"ack":CR
 
     Sender checks that it still needs to send a message. Messages
     received or other events that happened while waiting for the
     "token" may have made this message inappropriate or redundant.
 
- 3. sender writes LVB.
+ 3. sender writes LVB
+
     sender down-convert "message" from EX to CW
+
     sender try to get EX of "ack"
-    [ wait until all receivers have *processed* the "message" ]
 
-                                     [ triggered by bast of "ack" ]
-                                     receiver get CR on "message"
-                                     receiver read LVB
-                                     receiver processes the message
-                                     [ wait finish ]
-                                     receiver releases "ack"
-                                     receiver tries to get PR on "message"
+    ::
+
+      [ wait until all receivers have *processed* the "message" ]
 
-   sender                         receiver                  receiver
-   "token":EX                     "message":CR              "message":CR
-   "message":CW
-   "ack":EX
+                                       [ triggered by bast of "ack" ]
+                                       receiver get CR on "message"
+                                       receiver read LVB
+                                       receiver processes the message
+                                       [ wait finish ]
+                                       receiver releases "ack"
+                                       receiver tries to get PR on "message"
+
+     sender                         receiver                  receiver
+     "token":EX                     "message":CR              "message":CR
+     "message":CW
+     "ack":EX
 
  4. triggered by grant of EX on "ack" (indicating all receivers
     have processed message)
+
     sender down-converts "ack" from EX to CR
+
     sender releases "message"
+
     sender releases "token"
-                               receiver upconvert to PR on "message"
-                               receiver get CR of "ack"
-                               receiver release "message"
 
-   sender                      receiver                   receiver
-   "ack":CR                    "ack":CR                   "ack":CR
+    ::
+
+                                 receiver upconvert to PR on "message"
+                                 receiver get CR of "ack"
+                                 receiver release "message"
+
+     sender                      receiver                   receiver
+     "ack":CR                    "ack":CR                   "ack":CR
 
 
 4. Handling Failures
+====================
 
 4.1 Node Failure
+----------------
 
  When a node fails, the DLM informs the cluster with the slot
  number. The node starts a cluster recovery thread. The cluster
@@ -177,11 +224,11 @@ The algorithm is:
 	- cleans the bitmap of the failed node
 	- releases bitmap<number> lock of the failed node
 	- initiates resync of the bitmap on the current node
-		md_check_recovery is invoked within recover_bitmaps,
-		then md_check_recovery -> metadata_update_start/finish,
-		it will lock the communication by lock_comm.
-		Which means when one node is resyncing it blocks all
-		other nodes from writing anywhere on the array.
+	  md_check_recovery is invoked within recover_bitmaps,
+	  then md_check_recovery -> metadata_update_start/finish,
+	  it will lock the communication by lock_comm.
+	  Which means when one node is resyncing it blocks all
+	  other nodes from writing anywhere on the array.
 
  The resync process is the regular md resync. However, in a clustered
  environment when a resync is performed, it needs to tell other nodes
@@ -198,6 +245,7 @@ The algorithm is:
  particular I/O range should be suspended or not.
 
 4.2 Device Failure
+==================
 
  Device failures are handled and communicated with the metadata update
  routine.  When a node detects a device failure it does not allow
@@ -205,38 +253,41 @@ The algorithm is:
  acknowledged by all other nodes.
 
 5. Adding a new Device
+----------------------
 
  For adding a new device, it is necessary that all nodes "see" the new
  device to be added. For this, the following algorithm is used:
 
-    1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
+   1.  Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
        ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CLUSTER_ADD)
-    2. Node 1 sends a NEWDISK message with uuid and slot number
-    3. Other nodes issue kobject_uevent_env with uuid and slot number
+   2.  Node 1 sends a NEWDISK message with uuid and slot number
+   3.  Other nodes issue kobject_uevent_env with uuid and slot number
        (Steps 4,5 could be a udev rule)
-    4. In userspace, the node searches for the disk, perhaps
+   4.  In userspace, the node searches for the disk, perhaps
        using blkid -t SUB_UUID=""
-    5. Other nodes issue either of the following depending on whether
+   5.  Other nodes issue either of the following depending on whether
        the disk was found:
        ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
-             disc.number set to slot number)
+       disc.number set to slot number)
        ioctl(CLUSTERED_DISK_NACK)
-    6. Other nodes drop lock on "no-new-devs" (CR) if device is found
-    7. Node 1 attempts EX lock on "no-new-dev"
-    8. If node 1 gets the lock, it sends METADATA_UPDATED after
+   6.  Other nodes drop lock on "no-new-devs" (CR) if device is found
+   7.  Node 1 attempts EX lock on "no-new-dev"
+   8.  If node 1 gets the lock, it sends METADATA_UPDATED after
        unmarking the disk as SpareLocal
-    9. If not (get "no-new-dev" lock), it fails the operation and sends
+   9.  If not (get "no-new-dev" lock), it fails the operation and sends
        METADATA_UPDATED.
    10. Other nodes get the information whether a disk is added or not
        by the following METADATA_UPDATED.
 
-6. Module interface.
+6. Module interface
+===================
 
  There are 17 call-backs which the md core can make to the cluster
  module.  Understanding these can give a good overview of the whole
  process.
 
 6.1 join(nodes) and leave()
+---------------------------
 
  These are called when an array is started with a clustered bitmap,
  and when the array is stopped.  join() ensures the cluster is
@@ -244,11 +295,13 @@ The algorithm is:
  Only the first 'nodes' nodes in the cluster can use the array.
 
 6.2 slot_number()
+-----------------
 
  Reports the slot number advised by the cluster infrastructure.
  Range is from 0 to nodes-1.
 
 6.3 resync_info_update()
+------------------------
 
  This updates the resync range that is stored in the bitmap lock.
  The starting point is updated as the resync progresses.  The
@@ -256,6 +309,7 @@ The algorithm is:
  It does *not* send a RESYNCING message.
 
 6.4 resync_start(), resync_finish()
+-----------------------------------
 
  These are called when resync/recovery/reshape starts or stops.
  They update the resyncing range in the bitmap lock and also
@@ -265,8 +319,8 @@ The algorithm is:
  resync_finish() also sends a BITMAP_NEEDS_SYNC message which
  allows some other node to take over.
 
-6.5 metadata_update_start(), metadata_update_finish(),
-    metadata_update_cancel().
+6.5 metadata_update_start(), metadata_update_finish(), metadata_update_cancel()
+-------------------------------------------------------------------------------
 
  metadata_update_start is used to get exclusive access to
  the metadata.  If a change is still needed once that access is
@@ -275,6 +329,7 @@ The algorithm is:
  can be used to release the lock.
 
 6.6 area_resyncing()
+--------------------
 
  This combines two elements of functionality.
 
@@ -289,6 +344,7 @@ The algorithm is:
  a node failure.
 
 6.7 add_new_disk_start(), add_new_disk_finish(), new_disk_ack()
+---------------------------------------------------------------
 
  These are used to manage the new-disk protocol described above.
  When a new device is added, add_new_disk_start() is called before
@@ -300,17 +356,20 @@ The algorithm is:
  new_disk_ack() is called.
 
 6.8 remove_disk()
+-----------------
 
  This is called when a spare or failed device is removed from
  the array.  It causes a REMOVE message to be send to other nodes.
 
 6.9 gather_bitmaps()
+--------------------
 
  This sends a RE_ADD message to all other nodes and then
  gathers bitmap information from all bitmaps.  This combined
  bitmap is then used to recovery the re-added device.
 
 6.10 lock_all_bitmaps() and unlock_all_bitmaps()
+------------------------------------------------
 
  These are called when change bitmap to none. If a node plans
  to clear the cluster raid's bitmap, it need to make sure no other
@@ -319,6 +378,7 @@ The algorithm is:
  accordingly.
 
 7. Unsupported features
+=======================
 
 There are somethings which are not supported by cluster MD yet.
 
diff --git a/Documentation/md/raid5-cache.txt b/Documentation/driver-api/md/raid5-cache.rst
index 2b210f295786..d7a15f44a7c3 100644
--- a/Documentation/md/raid5-cache.txt
+++ b/Documentation/driver-api/md/raid5-cache.rst
@@ -1,4 +1,6 @@
-RAID5 cache
+================
+RAID 4/5/6 cache
+================
 
 Raid 4/5/6 could include an extra disk for data cache besides normal RAID
 disks. The role of RAID disks isn't changed with the cache disk. The cache disk
@@ -6,19 +8,19 @@ caches data to the RAID disks. The cache can be in write-through (supported
 since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
 3.4) has a new option '--write-journal' to create array with cache. Please
 refer to mdadm manual for details. By default (RAID array starts), the cache is
-in write-through mode. A user can switch it to write-back mode by:
+in write-through mode. A user can switch it to write-back mode by::
 
-echo "write-back" > /sys/block/md0/md/journal_mode
+	echo "write-back" > /sys/block/md0/md/journal_mode
 
-And switch it back to write-through mode by:
+And switch it back to write-through mode by::
 
-echo "write-through" > /sys/block/md0/md/journal_mode
+	echo "write-through" > /sys/block/md0/md/journal_mode
 
 In both modes, all writes to the array will hit cache disk first. This means
 the cache disk must be fast and sustainable.
 
--------------------------------------
-write-through mode:
+write-through mode
+==================
 
 This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
 shutdown can cause data in some stripes to not be in consistent state, eg, data
@@ -42,8 +44,8 @@ exposed to 'write hole' again.
 In write-through mode, the cache disk isn't required to be big. Several
 hundreds megabytes are enough.
 
---------------------------------------
-write-back mode:
+write-back mode
+===============
 
 write-back mode fixes the 'write hole' issue too, since all write data is
 cached on cache disk. But the main goal of 'write-back' cache is to speed up
@@ -64,16 +66,16 @@ data loss.
 In write-back mode, MD also caches data in memory. The memory cache includes
 the same data stored on cache disk, so a power loss doesn't cause data loss.
 The memory cache size has performance impact for the array. It's recommended
-the size is big. A user can configure the size by:
+the size is big. A user can configure the size by::
 
-echo "2048" > /sys/block/md0/md/stripe_cache_size
+	echo "2048" > /sys/block/md0/md/stripe_cache_size
 
 Too small cache disk will make the write aggregation less efficient in this
 mode depending on the workloads. It's recommended to use a cache disk with at
 least several gigabytes size in write-back mode.
 
---------------------------------------
-The implementation:
+The implementation
+==================
 
 The write-through and write-back cache use the same disk format. The cache disk
 is organized as a simple write log. The log consists of 'meta data' and 'data'
diff --git a/Documentation/md/raid5-ppl.txt b/Documentation/driver-api/md/raid5-ppl.rst
index bfa092589e00..357e5515bc55 100644
--- a/Documentation/md/raid5-ppl.txt
+++ b/Documentation/driver-api/md/raid5-ppl.rst
@@ -1,4 +1,6 @@
+==================
 Partial Parity Log
+==================
 
 Partial Parity Log (PPL) is a feature available for RAID5 arrays. The issue
 addressed by PPL is that after a dirty shutdown, parity of a particular stripe
diff --git a/Documentation/driver-api/memory-devices/index.rst b/Documentation/driver-api/memory-devices/index.rst
new file mode 100644
index 000000000000..28101458cda5
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Memory Controller drivers
+=========================
+
+.. toctree::
+    :maxdepth: 1
+
+    ti-emif
+    ti-gpmc
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/memory-devices/ti-emif.txt b/Documentation/driver-api/memory-devices/ti-emif.rst
index f4ad9a7d0f4b..dea2ad9bcd7e 100644
--- a/Documentation/memory-devices/ti-emif.txt
+++ b/Documentation/driver-api/memory-devices/ti-emif.rst
@@ -1,20 +1,24 @@
-TI EMIF SDRAM Controller Driver:
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+TI EMIF SDRAM Controller Driver
+===============================
 
 Author
-========
+======
 Aneesh V <aneesh@ti.com>
 
 Location
-============
+========
 driver/memory/emif.c
 
 Supported SoCs:
-===================
+===============
 TI OMAP44xx
 TI OMAP54xx
 
 Menuconfig option:
-==========================
+==================
 Device Drivers
 	Memory devices
 		Texas Instruments EMIF driver
@@ -29,10 +33,11 @@ functions of the driver includes re-configuring AC timing
 parameters and other settings during frequency, voltage and
 temperature changes
 
-Platform Data (see include/linux/platform_data/emif_plat.h):
-=====================================================================
+Platform Data (see include/linux/platform_data/emif_plat.h)
+===========================================================
 DDR device details and other board dependent and SoC dependent
 information can be passed through platform data (struct emif_platform_data)
+
 - DDR device details: 'struct ddr_device_info'
 - Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
 - Custom configurations: customizable policy options through
@@ -40,17 +45,19 @@ information can be passed through platform data (struct emif_platform_data)
 - IP revision
 - PHY type
 
-Interface to the external world:
-================================
+Interface to the external world
+===============================
 EMIF driver registers notifiers for voltage and frequency changes
 affecting EMIF and takes appropriate actions when these are invoked.
+
 - freq_pre_notify_handling()
 - freq_post_notify_handling()
 - volt_notify_handling()
 
 Debugfs
-========
+=======
 The driver creates two debugfs entries per device.
+
 - regcache_dump : dump of register values calculated and saved for all
   frequencies used so far.
 - mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
diff --git a/Documentation/bus-devices/ti-gpmc.txt b/Documentation/driver-api/memory-devices/ti-gpmc.rst
index cc9ce57e0a26..33efcb81f080 100644
--- a/Documentation/bus-devices/ti-gpmc.txt
+++ b/Documentation/driver-api/memory-devices/ti-gpmc.rst
@@ -1,8 +1,12 @@
-GPMC (General Purpose Memory Controller):
-=========================================
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+GPMC (General Purpose Memory Controller)
+========================================
 
 GPMC is an unified memory controller dedicated to interfacing external
 memory devices like
+
  * Asynchronous SRAM like memories and application specific integrated
    circuit devices.
  * Asynchronous, synchronous, and page mode burst NOR flash devices
@@ -48,75 +52,128 @@ most of the datasheets & hardware (to be exact none of those supported
 in mainline having custom timing routine) and by simulation.
 
 gpmc timing dependency on peripheral timings:
+
 [<gpmc_timing>: <peripheral timing1>, <peripheral timing2> ...]
 
 1. common
-cs_on: t_ceasu
-adv_on: t_avdasu, t_ceavd
+
+cs_on:
+	t_ceasu
+adv_on:
+	t_avdasu, t_ceavd
 
 2. sync common
-sync_clk: clk
-page_burst_access: t_bacc
-clk_activation: t_ces, t_avds
+
+sync_clk:
+	clk
+page_burst_access:
+	t_bacc
+clk_activation:
+	t_ces, t_avds
 
 3. read async muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu, t_aavdh
-access: t_iaa, t_oe, t_ce, t_aa
-rd_cycle: t_rd_cycle, t_cez_r, t_oez
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu, t_aavdh
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
 
 4. read async non-muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu
-access: t_iaa, t_oe, t_ce, t_aa
-rd_cycle: t_rd_cycle, t_cez_r, t_oez
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
 
 5. read sync muxed
-adv_rd_off: t_avdp_r, t_avdh
-oe_on: t_oeasu, t_ach, cyc_aavdh_oe
-access: t_iaa, cyc_iaa, cyc_oe
-rd_cycle: t_cez_r, t_oez, t_ce_rdyz
+
+adv_rd_off:
+	t_avdp_r, t_avdh
+oe_on:
+	t_oeasu, t_ach, cyc_aavdh_oe
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
 
 6. read sync non-muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu
-access: t_iaa, cyc_iaa, cyc_oe
-rd_cycle: t_cez_r, t_oez, t_ce_rdyz
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
 
 7. write async muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu, t_aavdh, cyc_aavhd_we
-we_off: t_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_wr_cycle
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
 
 8. write async non-muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu
-we_off: t_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_wr_cycle
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
 
 9. write sync muxed
-adv_wr_off: t_avdp_w, t_avdh
-we_on, wr_data_mux_bus: t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
-we_off: t_wpl, cyc_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_ce_rdyz
+
+adv_wr_off:
+	t_avdp_w, t_avdh
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
 
 10. write sync non-muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu, t_rdyo
-we_off: t_wpl, cyc_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_ce_rdyz
-
-
-Note: Many of gpmc timings are dependent on other gpmc timings (a few
-gpmc timings purely dependent on other gpmc timings, a reason that
-some of the gpmc timings are missing above), and it will result in
-indirect dependency of peripheral timings to gpmc timings other than
-mentioned above, refer timing routine for more details. To know what
-these peripheral timings correspond to, please see explanations in
-struct gpmc_device_timings definition. And for gpmc timings refer
-IP details (link above).
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
+
+
+Note:
+  Many of gpmc timings are dependent on other gpmc timings (a few
+  gpmc timings purely dependent on other gpmc timings, a reason that
+  some of the gpmc timings are missing above), and it will result in
+  indirect dependency of peripheral timings to gpmc timings other than
+  mentioned above, refer timing routine for more details. To know what
+  these peripheral timings correspond to, please see explanations in
+  struct gpmc_device_timings definition. And for gpmc timings refer
+  IP details (link above).
diff --git a/Documentation/men-chameleon-bus.txt b/Documentation/driver-api/men-chameleon-bus.rst
index 1b1f048aa748..1b1f048aa748 100644
--- a/Documentation/men-chameleon-bus.txt
+++ b/Documentation/driver-api/men-chameleon-bus.rst
diff --git a/Documentation/driver-api/mmc/index.rst b/Documentation/driver-api/mmc/index.rst
new file mode 100644
index 000000000000..7339736ac774
--- /dev/null
+++ b/Documentation/driver-api/mmc/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+MMC/SD/SDIO card support
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   mmc-dev-attrs
+   mmc-dev-parts
+   mmc-async-req
+   mmc-tools
diff --git a/Documentation/mmc/mmc-async-req.txt b/Documentation/driver-api/mmc/mmc-async-req.rst
index ae1907b10e4a..0f7197c9c3b5 100644
--- a/Documentation/mmc/mmc-async-req.txt
+++ b/Documentation/driver-api/mmc/mmc-async-req.rst
@@ -1,13 +1,20 @@
+========================
+MMC Asynchronous Request
+========================
+
 Rationale
 =========
 
 How significant is the cache maintenance overhead?
+
 It depends. Fast eMMC and multiple cache levels with speculative cache
 pre-fetch makes the cache overhead relatively significant. If the DMA
 preparations for the next request are done in parallel with the current
 transfer, the DMA preparation overhead would not affect the MMC performance.
+
 The intention of non-blocking (asynchronous) MMC requests is to minimize the
 time between when an MMC request ends and another MMC request begins.
+
 Using mmc_wait_for_req(), the MMC controller is idle while dma_map_sg and
 dma_unmap_sg are processing. Using non-blocking MMC requests makes it
 possible to prepare the caches for next job in parallel with an active
@@ -17,6 +24,7 @@ MMC block driver
 ================
 
 The mmc_blk_issue_rw_rq() in the MMC block driver is made non-blocking.
+
 The increase in throughput is proportional to the time it takes to
 prepare (major part of preparations are dma_map_sg() and dma_unmap_sg())
 a request and how fast the memory is. The faster the MMC/SD is the
@@ -35,6 +43,7 @@ MMC core API extension
 ======================
 
 There is one new public function mmc_start_req().
+
 It starts a new MMC command request for a host. The function isn't
 truly non-blocking. If there is an ongoing async request it waits
 for completion of that request and starts the new one and returns. It
@@ -47,6 +56,7 @@ MMC host extensions
 There are two optional members in the mmc_host_ops -- pre_req() and
 post_req() -- that the host driver may implement in order to move work
 to before and after the actual mmc_host_ops.request() function is called.
+
 In the DMA case pre_req() may do dma_map_sg() and prepare the DMA
 descriptor, and post_req() runs the dma_unmap_sg().
 
@@ -55,33 +65,34 @@ Optimize for the first request
 
 The first request in a series of requests can't be prepared in parallel
 with the previous transfer, since there is no previous request.
+
 The argument is_first_req in pre_req() indicates that there is no previous
 request. The host driver may optimize for this scenario to minimize
 the performance loss. A way to optimize for this is to split the current
 request in two chunks, prepare the first chunk and start the request,
 and finally prepare the second chunk and start the transfer.
 
-Pseudocode to handle is_first_req scenario with minimal prepare overhead:
-
-if (is_first_req && req->size > threshold)
-   /* start MMC transfer for the complete transfer size */
-   mmc_start_command(MMC_CMD_TRANSFER_FULL_SIZE);
-
-   /*
-    * Begin to prepare DMA while cmd is being processed by MMC.
-    * The first chunk of the request should take the same time
-    * to prepare as the "MMC process command time".
-    * If prepare time exceeds MMC cmd time
-    * the transfer is delayed, guesstimate max 4k as first chunk size.
-    */
-    prepare_1st_chunk_for_dma(req);
-    /* flush pending desc to the DMAC (dmaengine.h) */
-    dma_issue_pending(req->dma_desc);
-
-    prepare_2nd_chunk_for_dma(req);
-    /*
-     * The second issue_pending should be called before MMC runs out
-     * of the first chunk. If the MMC runs out of the first data chunk
-     * before this call, the transfer is delayed.
-     */
-    dma_issue_pending(req->dma_desc);
+Pseudocode to handle is_first_req scenario with minimal prepare overhead::
+
+  if (is_first_req && req->size > threshold)
+     /* start MMC transfer for the complete transfer size */
+     mmc_start_command(MMC_CMD_TRANSFER_FULL_SIZE);
+
+     /*
+      * Begin to prepare DMA while cmd is being processed by MMC.
+      * The first chunk of the request should take the same time
+      * to prepare as the "MMC process command time".
+      * If prepare time exceeds MMC cmd time
+      * the transfer is delayed, guesstimate max 4k as first chunk size.
+      */
+      prepare_1st_chunk_for_dma(req);
+      /* flush pending desc to the DMAC (dmaengine.h) */
+      dma_issue_pending(req->dma_desc);
+
+      prepare_2nd_chunk_for_dma(req);
+      /*
+       * The second issue_pending should be called before MMC runs out
+       * of the first chunk. If the MMC runs out of the first data chunk
+       * before this call, the transfer is delayed.
+       */
+      dma_issue_pending(req->dma_desc);
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/driver-api/mmc/mmc-dev-attrs.rst
index 4ad0bb17f343..4f44b1b730d6 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/driver-api/mmc/mmc-dev-attrs.rst
@@ -1,3 +1,4 @@
+==================================
 SD and MMC Block Device Attributes
 ==================================
 
@@ -6,23 +7,29 @@ SD or MMC device.
 
 The following attributes are read/write.
 
-	force_ro		Enforce read-only access even if write protect switch is off.
+	========		===============================================
+	force_ro		Enforce read-only access even if write protect 					switch is off.
+	========		===============================================
 
 SD and MMC Device Attributes
 ============================
 
 All attributes are read-only.
 
+	======================	===============================================
 	cid			Card Identification Register
 	csd			Card Specific Data Register
 	scr			SD Card Configuration Register (SD only)
 	date			Manufacturing Date (from CID Register)
-	fwrev			Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
-	hwrev			Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+	fwrev			Firmware/Product Revision (from CID Register)
+				(SD and MMCv1 only)
+	hwrev			Hardware/Product Revision (from CID Register)
+				(SD and MMCv1 only)
 	manfid			Manufacturer ID (from CID Register)
 	name			Product Name (from CID Register)
 	oemid			OEM/Application ID (from CID Register)
-	prv			Product Revision (from CID Register) (SD and MMCv4 only)
+	prv			Product Revision (from CID Register)
+				(SD and MMCv4 only)
 	serial			Product Serial Number (from CID Register)
 	erase_size		Erase group size
 	preferred_erase_size	Preferred erase size
@@ -30,7 +37,10 @@ All attributes are read-only.
 	rel_sectors		Reliable write sector count
 	ocr 			Operation Conditions Register
 	dsr			Driver Stage Register
-	cmdq_en			Command Queue enabled: 1 => enabled, 0 => not enabled
+	cmdq_en			Command Queue enabled:
+
+					1 => enabled, 0 => not enabled
+	======================	===============================================
 
 Note on Erase Size and Preferred Erase Size:
 
@@ -44,14 +54,15 @@ Note on Erase Size and Preferred Erase Size:
 	SD/MMC cards can erase an arbitrarily large area up to and
 	including the whole card.  When erasing a large area it may
 	be desirable to do it in smaller chunks for three reasons:
-		1. A single erase command will make all other I/O on
+
+	     1. A single erase command will make all other I/O on
 		the card wait.  This is not a problem if the whole card
 		is being erased, but erasing one partition will make
 		I/O for another partition on the same card wait for the
 		duration of the erase - which could be a several
 		minutes.
-		2. To be able to inform the user of erase progress.
-		3. The erase timeout becomes too large to be very
+	     2. To be able to inform the user of erase progress.
+	     3. The erase timeout becomes too large to be very
 		useful.  Because the erase timeout contains a margin
 		which is multiplied by the size of the erase area,
 		the value can end up being several minutes for large
@@ -72,6 +83,9 @@ Note on Erase Size and Preferred Erase Size:
 	"preferred_erase_size" is in bytes.
 
 Note on raw_rpmb_size_mult:
+
 	"raw_rpmb_size_mult" is a multiple of 128kB block.
+
 	RPMB size in byte is calculated by using the following equation:
-	RPMB partition size = 128kB x raw_rpmb_size_mult
+
+		RPMB partition size = 128kB x raw_rpmb_size_mult
diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/driver-api/mmc/mmc-dev-parts.rst
index f08d078d43cf..995922f1f744 100644
--- a/Documentation/mmc/mmc-dev-parts.txt
+++ b/Documentation/driver-api/mmc/mmc-dev-parts.rst
@@ -1,3 +1,4 @@
+============================
 SD and MMC Device Partitions
 ============================
 
@@ -18,18 +19,18 @@ platform, write access is disabled by default to reduce the chance of
 accidental bricking.
 
 To enable write access to /dev/mmcblkXbootY, disable the forced read-only
-access with:
+access with::
 
-echo 0 > /sys/block/mmcblkXbootY/force_ro
+	echo 0 > /sys/block/mmcblkXbootY/force_ro
 
-To re-enable read-only access:
+To re-enable read-only access::
 
-echo 1 > /sys/block/mmcblkXbootY/force_ro
+	echo 1 > /sys/block/mmcblkXbootY/force_ro
 
 The boot partitions can also be locked read only until the next power on,
-with:
+with::
 
-echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+	echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
 
 This is a feature of the card and not of the kernel. If the card does
 not support boot partition locking, the file will not exist. If the
diff --git a/Documentation/mmc/mmc-tools.txt b/Documentation/driver-api/mmc/mmc-tools.rst
index 735509c165d5..54406093768b 100644
--- a/Documentation/mmc/mmc-tools.txt
+++ b/Documentation/driver-api/mmc/mmc-tools.rst
@@ -1,14 +1,17 @@
+======================
 MMC tools introduction
 ======================
 
 There is one MMC test tools called mmc-utils, which is maintained by Chris Ball,
 you can find it at the below public git repository:
-http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
+
+	http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
 
 Functions
 =========
 
 The mmc-utils tools can do the following:
+
  - Print and parse extcsd data.
  - Determine the eMMC writeprotect status.
  - Set the eMMC writeprotect status.
diff --git a/Documentation/driver-api/mtd/index.rst b/Documentation/driver-api/mtd/index.rst
new file mode 100644
index 000000000000..436ba5a851d7
--- /dev/null
+++ b/Documentation/driver-api/mtd/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Memory Technology Device (MTD)
+==============================
+
+.. toctree::
+   :maxdepth: 1
+
+   intel-spi
+   nand_ecc
+   spi-nor
diff --git a/Documentation/mtd/intel-spi.txt b/Documentation/driver-api/mtd/intel-spi.rst
index bc357729c2cb..0e6d9cd5388d 100644
--- a/Documentation/mtd/intel-spi.txt
+++ b/Documentation/driver-api/mtd/intel-spi.rst
@@ -1,5 +1,6 @@
+==============================
 Upgrading BIOS using intel-spi
-------------------------------
+==============================
 
 Many Intel CPUs like Baytrail and Braswell include SPI serial flash host
 controller which is used to hold BIOS and other platform specific data.
@@ -36,45 +37,45 @@ Linux.
     module parameter to modprobe).
 
  4) Once the board is up and running again, find the right MTD partition
-    (it is named as "BIOS"):
+    (it is named as "BIOS")::
 
-    # cat /proc/mtd
-    dev:    size   erasesize  name
-    mtd0: 00800000 00001000 "BIOS"
+	# cat /proc/mtd
+	dev:    size   erasesize  name
+	mtd0: 00800000 00001000 "BIOS"
 
     So here it will be /dev/mtd0 but it may vary.
 
- 5) Make backup of the existing image first:
+ 5) Make backup of the existing image first::
 
-    # dd if=/dev/mtd0ro of=bios.bak
-    16384+0 records in
-    16384+0 records out
-    8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
+	# dd if=/dev/mtd0ro of=bios.bak
+	16384+0 records in
+	16384+0 records out
+	8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
 
- 6) Verify the backup
+ 6) Verify the backup:
 
-    # sha1sum /dev/mtd0ro bios.bak
-    fdbb011920572ca6c991377c4b418a0502668b73  /dev/mtd0ro
-    fdbb011920572ca6c991377c4b418a0502668b73  bios.bak
+	# sha1sum /dev/mtd0ro bios.bak
+	fdbb011920572ca6c991377c4b418a0502668b73  /dev/mtd0ro
+	fdbb011920572ca6c991377c4b418a0502668b73  bios.bak
 
     The SHA1 sums must match. Otherwise do not continue any further!
 
  7) Erase the SPI serial flash. After this step, do not reboot the
-    board! Otherwise it will not start anymore.
+    board! Otherwise it will not start anymore::
 
-    # flash_erase /dev/mtd0 0 0
-    Erasing 4 Kibyte @ 7ff000 -- 100 % complete
+	# flash_erase /dev/mtd0 0 0
+	Erasing 4 Kibyte @ 7ff000 -- 100 % complete
 
  8) Once completed without errors you can write the new BIOS image:
 
     # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0
 
  9) Verify that the new content of the SPI serial flash matches the new
-    BIOS image:
+    BIOS image::
 
-    # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
-    9b4df9e4be2057fceec3a5529ec3d950836c87a2  /dev/mtd0ro
-    9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
+	# sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
+	9b4df9e4be2057fceec3a5529ec3d950836c87a2  /dev/mtd0ro
+	9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
 
     The SHA1 sums should match.
 
@@ -84,5 +85,6 @@ Linux.
 References
 ----------
 
-[1] https://firmware.intel.com/sites/default/files/MinnowBoard.MAX_.X64.92.R01.zip
+[1] https://firmware.intel.com/sites/default/files/MinnowBoard%2EMAX_%2EX64%2E92%2ER01%2Ezip
+
 [2] http://www.linux-mtd.infradead.org/
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/driver-api/mtd/nand_ecc.rst
index f8c3284bf6a7..e8d3c53a5056 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/driver-api/mtd/nand_ecc.rst
@@ -1,3 +1,7 @@
+==========================
+NAND Error-correction Code
+==========================
+
 Introduction
 ============
 
@@ -37,63 +41,79 @@ sometimes also referred to as xor. In C the operator for xor is ^
 Back to ecc.
 Let's give a small figure:
 
+=========  ==== ==== ==== ==== ==== ==== ==== ====   === === === === ====
 byte   0:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp2 rp4 ... rp14
 byte   1:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp2 rp4 ... rp14
 byte   2:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp3 rp4 ... rp14
 byte   3:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp4 ... rp14
 byte   4:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp2 rp5 ... rp14
-....
+...
 byte 254:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp3 rp5 ... rp15
 byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp1  cp0  cp1  cp0  cp1  cp0  cp1  cp0
            cp3  cp3  cp2  cp2  cp3  cp3  cp2  cp2
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
+=========  ==== ==== ==== ==== ==== ==== ==== ====   === === === === ====
 
 This figure represents a sector of 256 bytes.
 cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
-cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
-so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
+
+- cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
+
+  so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
+
 Similarly cp1 is the sum of all bit1, bit3, bit5 and bit7.
-cp2 is the parity over bit0, bit1, bit4 and bit5
-cp3 is the parity over bit2, bit3, bit6 and bit7.
-cp4 is the parity over bit0, bit1, bit2 and bit3.
-cp5 is the parity over bit4, bit5, bit6 and bit7.
+
+- cp2 is the parity over bit0, bit1, bit4 and bit5
+- cp3 is the parity over bit2, bit3, bit6 and bit7.
+- cp4 is the parity over bit0, bit1, bit2 and bit3.
+- cp5 is the parity over bit4, bit5, bit6 and bit7.
+
 Note that each of cp0 .. cp5 is exactly one bit.
 
 Row parity actually works almost the same.
-rp0 is the parity of all even bytes (0, 2, 4, 6, ... 252, 254)
-rp1 is the parity of all odd bytes (1, 3, 5, 7, ..., 253, 255)
-rp2 is the parity of all bytes 0, 1, 4, 5, 8, 9, ...
-(so handle two bytes, then skip 2 bytes).
-rp3 is covers the half rp2 does not cover (bytes 2, 3, 6, 7, 10, 11, ...)
-for rp4 the rule is cover 4 bytes, skip 4 bytes, cover 4 bytes, skip 4 etc.
-so rp4 calculates parity over bytes 0, 1, 2, 3, 8, 9, 10, 11, 16, ...)
-and rp5 covers the other half, so bytes 4, 5, 6, 7, 12, 13, 14, 15, 20, ..
+
+- rp0 is the parity of all even bytes (0, 2, 4, 6, ... 252, 254)
+- rp1 is the parity of all odd bytes (1, 3, 5, 7, ..., 253, 255)
+- rp2 is the parity of all bytes 0, 1, 4, 5, 8, 9, ...
+  (so handle two bytes, then skip 2 bytes).
+- rp3 is covers the half rp2 does not cover (bytes 2, 3, 6, 7, 10, 11, ...)
+- for rp4 the rule is cover 4 bytes, skip 4 bytes, cover 4 bytes, skip 4 etc.
+
+  so rp4 calculates parity over bytes 0, 1, 2, 3, 8, 9, 10, 11, 16, ...)
+- and rp5 covers the other half, so bytes 4, 5, 6, 7, 12, 13, 14, 15, 20, ..
+
 The story now becomes quite boring. I guess you get the idea.
-rp6 covers 8 bytes then skips 8 etc
-rp7 skips 8 bytes then covers 8 etc
-rp8 covers 16 bytes then skips 16 etc
-rp9 skips 16 bytes then covers 16 etc
-rp10 covers 32 bytes then skips 32 etc
-rp11 skips 32 bytes then covers 32 etc
-rp12 covers 64 bytes then skips 64 etc
-rp13 skips 64 bytes then covers 64 etc
-rp14 covers 128 bytes then skips 128
-rp15 skips 128 bytes then covers 128
+
+- rp6 covers 8 bytes then skips 8 etc
+- rp7 skips 8 bytes then covers 8 etc
+- rp8 covers 16 bytes then skips 16 etc
+- rp9 skips 16 bytes then covers 16 etc
+- rp10 covers 32 bytes then skips 32 etc
+- rp11 skips 32 bytes then covers 32 etc
+- rp12 covers 64 bytes then skips 64 etc
+- rp13 skips 64 bytes then covers 64 etc
+- rp14 covers 128 bytes then skips 128
+- rp15 skips 128 bytes then covers 128
 
 In the end the parity bits are grouped together in three bytes as
 follows:
+
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 ECC    Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 ECC 0   rp07  rp06  rp05  rp04  rp03  rp02  rp01  rp00
 ECC 1   rp15  rp14  rp13  rp12  rp11  rp10  rp09  rp08
 ECC 2   cp5   cp4   cp3   cp2   cp1   cp0      1     1
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 
 I detected after writing this that ST application note AN1823
 (http://www.st.com/stonline/) gives a much
 nicer picture.(but they use line parity as term where I use row parity)
 Oh well, I'm graphically challenged, so suffer with me for a moment :-)
+
 And I could not reuse the ST picture anyway for copyright reasons.
 
 
@@ -101,9 +121,10 @@ Attempt 0
 =========
 
 Implementing the parity calculation is pretty simple.
-In C pseudocode:
-for (i = 0; i < 256; i++)
-{
+In C pseudocode::
+
+  for (i = 0; i < 256; i++)
+  {
     if (i & 0x01)
        rp1 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1;
     else
@@ -142,7 +163,7 @@ for (i = 0; i < 256; i++)
     cp3 = bit7 ^ bit6 ^ bit3 ^ bit2 ^ cp3
     cp4 = bit3 ^ bit2 ^ bit1 ^ bit0 ^ cp4
     cp5 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ cp5
-}
+  }
 
 
 Analysis 0
@@ -167,82 +188,84 @@ This leads to:
 Attempt 1
 =========
 
-const char parity[256] = {
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0
-};
-
-void ecc1(const unsigned char *buf, unsigned char *code)
-{
-    int i;
-    const unsigned char *bp = buf;
-    unsigned char cur;
-    unsigned char rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
-    unsigned char rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
-    unsigned char par;
-
-    par = 0;
-    rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
-    rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
-    rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
-    rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
-
-    for (i = 0; i < 256; i++)
-    {
-        cur = *bp++;
-        par ^= cur;
-        if (i & 0x01) rp1 ^= cur; else rp0 ^= cur;
-        if (i & 0x02) rp3 ^= cur; else rp2 ^= cur;
-        if (i & 0x04) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x08) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x10) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x20) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x40) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x80) rp15 ^= cur; else rp14 ^= cur;
-    }
-    code[0] =
-        (parity[rp7] << 7) |
-        (parity[rp6] << 6) |
-        (parity[rp5] << 5) |
-        (parity[rp4] << 4) |
-        (parity[rp3] << 3) |
-        (parity[rp2] << 2) |
-        (parity[rp1] << 1) |
-        (parity[rp0]);
-    code[1] =
-        (parity[rp15] << 7) |
-        (parity[rp14] << 6) |
-        (parity[rp13] << 5) |
-        (parity[rp12] << 4) |
-        (parity[rp11] << 3) |
-        (parity[rp10] << 2) |
-        (parity[rp9]  << 1) |
-        (parity[rp8]);
-    code[2] =
-        (parity[par & 0xf0] << 7) |
-        (parity[par & 0x0f] << 6) |
-        (parity[par & 0xcc] << 5) |
-        (parity[par & 0x33] << 4) |
-        (parity[par & 0xaa] << 3) |
-        (parity[par & 0x55] << 2);
-    code[0] = ~code[0];
-    code[1] = ~code[1];
-    code[2] = ~code[2];
-}
+::
+
+  const char parity[256] = {
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0
+  };
+
+  void ecc1(const unsigned char *buf, unsigned char *code)
+  {
+      int i;
+      const unsigned char *bp = buf;
+      unsigned char cur;
+      unsigned char rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+      unsigned char rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+      unsigned char par;
+
+      par = 0;
+      rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+      rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+      rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+      rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+
+      for (i = 0; i < 256; i++)
+      {
+          cur = *bp++;
+          par ^= cur;
+          if (i & 0x01) rp1 ^= cur; else rp0 ^= cur;
+          if (i & 0x02) rp3 ^= cur; else rp2 ^= cur;
+          if (i & 0x04) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x08) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x10) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x20) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x40) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x80) rp15 ^= cur; else rp14 ^= cur;
+      }
+      code[0] =
+          (parity[rp7] << 7) |
+          (parity[rp6] << 6) |
+          (parity[rp5] << 5) |
+          (parity[rp4] << 4) |
+          (parity[rp3] << 3) |
+          (parity[rp2] << 2) |
+          (parity[rp1] << 1) |
+          (parity[rp0]);
+      code[1] =
+          (parity[rp15] << 7) |
+          (parity[rp14] << 6) |
+          (parity[rp13] << 5) |
+          (parity[rp12] << 4) |
+          (parity[rp11] << 3) |
+          (parity[rp10] << 2) |
+          (parity[rp9]  << 1) |
+          (parity[rp8]);
+      code[2] =
+          (parity[par & 0xf0] << 7) |
+          (parity[par & 0x0f] << 6) |
+          (parity[par & 0xcc] << 5) |
+          (parity[par & 0x33] << 4) |
+          (parity[par & 0xaa] << 3) |
+          (parity[par & 0x55] << 2);
+      code[0] = ~code[0];
+      code[1] = ~code[1];
+      code[2] = ~code[2];
+  }
 
 Still pretty straightforward. The last three invert statements are there to
 give a checksum of 0xff 0xff 0xff for an empty flash. In an empty flash
@@ -293,88 +316,90 @@ Let's give it a try...
 Attempt 2
 =========
 
-extern const char parity[256];
-
-void ecc2(const unsigned char *buf, unsigned char *code)
-{
-    int i;
-    const unsigned long *bp = (unsigned long *)buf;
-    unsigned long cur;
-    unsigned long rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
-    unsigned long rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
-    unsigned long par;
-
-    par = 0;
-    rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
-    rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
-    rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
-    rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
-
-    for (i = 0; i < 64; i++)
-    {
-        cur = *bp++;
-        par ^= cur;
-        if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
-    }
-    /*
-       we need to adapt the code generation for the fact that rp vars are now
-       long; also the column parity calculation needs to be changed.
-       we'll bring rp4 to 15 back to single byte entities by shifting and
-       xoring
-    */
-    rp4 ^= (rp4 >> 16); rp4 ^= (rp4 >> 8); rp4 &= 0xff;
-    rp5 ^= (rp5 >> 16); rp5 ^= (rp5 >> 8); rp5 &= 0xff;
-    rp6 ^= (rp6 >> 16); rp6 ^= (rp6 >> 8); rp6 &= 0xff;
-    rp7 ^= (rp7 >> 16); rp7 ^= (rp7 >> 8); rp7 &= 0xff;
-    rp8 ^= (rp8 >> 16); rp8 ^= (rp8 >> 8); rp8 &= 0xff;
-    rp9 ^= (rp9 >> 16); rp9 ^= (rp9 >> 8); rp9 &= 0xff;
-    rp10 ^= (rp10 >> 16); rp10 ^= (rp10 >> 8); rp10 &= 0xff;
-    rp11 ^= (rp11 >> 16); rp11 ^= (rp11 >> 8); rp11 &= 0xff;
-    rp12 ^= (rp12 >> 16); rp12 ^= (rp12 >> 8); rp12 &= 0xff;
-    rp13 ^= (rp13 >> 16); rp13 ^= (rp13 >> 8); rp13 &= 0xff;
-    rp14 ^= (rp14 >> 16); rp14 ^= (rp14 >> 8); rp14 &= 0xff;
-    rp15 ^= (rp15 >> 16); rp15 ^= (rp15 >> 8); rp15 &= 0xff;
-    rp3 = (par >> 16); rp3 ^= (rp3 >> 8); rp3 &= 0xff;
-    rp2 = par & 0xffff; rp2 ^= (rp2 >> 8); rp2 &= 0xff;
-    par ^= (par >> 16);
-    rp1 = (par >> 8); rp1 &= 0xff;
-    rp0 = (par & 0xff);
-    par ^= (par >> 8); par &= 0xff;
-
-    code[0] =
-        (parity[rp7] << 7) |
-        (parity[rp6] << 6) |
-        (parity[rp5] << 5) |
-        (parity[rp4] << 4) |
-        (parity[rp3] << 3) |
-        (parity[rp2] << 2) |
-        (parity[rp1] << 1) |
-        (parity[rp0]);
-    code[1] =
-        (parity[rp15] << 7) |
-        (parity[rp14] << 6) |
-        (parity[rp13] << 5) |
-        (parity[rp12] << 4) |
-        (parity[rp11] << 3) |
-        (parity[rp10] << 2) |
-        (parity[rp9]  << 1) |
-        (parity[rp8]);
-    code[2] =
-        (parity[par & 0xf0] << 7) |
-        (parity[par & 0x0f] << 6) |
-        (parity[par & 0xcc] << 5) |
-        (parity[par & 0x33] << 4) |
-        (parity[par & 0xaa] << 3) |
-        (parity[par & 0x55] << 2);
-    code[0] = ~code[0];
-    code[1] = ~code[1];
-    code[2] = ~code[2];
-}
+::
+
+  extern const char parity[256];
+
+  void ecc2(const unsigned char *buf, unsigned char *code)
+  {
+      int i;
+      const unsigned long *bp = (unsigned long *)buf;
+      unsigned long cur;
+      unsigned long rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+      unsigned long rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+      unsigned long par;
+
+      par = 0;
+      rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+      rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+      rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+      rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+
+      for (i = 0; i < 64; i++)
+      {
+          cur = *bp++;
+          par ^= cur;
+          if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+      }
+      /*
+         we need to adapt the code generation for the fact that rp vars are now
+         long; also the column parity calculation needs to be changed.
+         we'll bring rp4 to 15 back to single byte entities by shifting and
+         xoring
+      */
+      rp4 ^= (rp4 >> 16); rp4 ^= (rp4 >> 8); rp4 &= 0xff;
+      rp5 ^= (rp5 >> 16); rp5 ^= (rp5 >> 8); rp5 &= 0xff;
+      rp6 ^= (rp6 >> 16); rp6 ^= (rp6 >> 8); rp6 &= 0xff;
+      rp7 ^= (rp7 >> 16); rp7 ^= (rp7 >> 8); rp7 &= 0xff;
+      rp8 ^= (rp8 >> 16); rp8 ^= (rp8 >> 8); rp8 &= 0xff;
+      rp9 ^= (rp9 >> 16); rp9 ^= (rp9 >> 8); rp9 &= 0xff;
+      rp10 ^= (rp10 >> 16); rp10 ^= (rp10 >> 8); rp10 &= 0xff;
+      rp11 ^= (rp11 >> 16); rp11 ^= (rp11 >> 8); rp11 &= 0xff;
+      rp12 ^= (rp12 >> 16); rp12 ^= (rp12 >> 8); rp12 &= 0xff;
+      rp13 ^= (rp13 >> 16); rp13 ^= (rp13 >> 8); rp13 &= 0xff;
+      rp14 ^= (rp14 >> 16); rp14 ^= (rp14 >> 8); rp14 &= 0xff;
+      rp15 ^= (rp15 >> 16); rp15 ^= (rp15 >> 8); rp15 &= 0xff;
+      rp3 = (par >> 16); rp3 ^= (rp3 >> 8); rp3 &= 0xff;
+      rp2 = par & 0xffff; rp2 ^= (rp2 >> 8); rp2 &= 0xff;
+      par ^= (par >> 16);
+      rp1 = (par >> 8); rp1 &= 0xff;
+      rp0 = (par & 0xff);
+      par ^= (par >> 8); par &= 0xff;
+
+      code[0] =
+          (parity[rp7] << 7) |
+          (parity[rp6] << 6) |
+          (parity[rp5] << 5) |
+          (parity[rp4] << 4) |
+          (parity[rp3] << 3) |
+          (parity[rp2] << 2) |
+          (parity[rp1] << 1) |
+          (parity[rp0]);
+      code[1] =
+          (parity[rp15] << 7) |
+          (parity[rp14] << 6) |
+          (parity[rp13] << 5) |
+          (parity[rp12] << 4) |
+          (parity[rp11] << 3) |
+          (parity[rp10] << 2) |
+          (parity[rp9]  << 1) |
+          (parity[rp8]);
+      code[2] =
+          (parity[par & 0xf0] << 7) |
+          (parity[par & 0x0f] << 6) |
+          (parity[par & 0xcc] << 5) |
+          (parity[par & 0x33] << 4) |
+          (parity[par & 0xaa] << 3) |
+          (parity[par & 0x55] << 2);
+      code[0] = ~code[0];
+      code[1] = ~code[1];
+      code[2] = ~code[2];
+  }
 
 The parity array is not shown any more. Note also that for these
 examples I kinda deviated from my regular programming style by allowing
@@ -403,28 +428,32 @@ lookups
 Attempt 3
 =========
 
-Odd replaced:
-        if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
-with
-        if (i & 0x01) rp5 ^= cur;
-        if (i & 0x02) rp7 ^= cur;
-        if (i & 0x04) rp9 ^= cur;
-        if (i & 0x08) rp11 ^= cur;
-        if (i & 0x10) rp13 ^= cur;
-        if (i & 0x20) rp15 ^= cur;
-
-        and outside the loop added:
-        rp4  = par ^ rp5;
-        rp6  = par ^ rp7;
-        rp8  = par ^ rp9;
-        rp10  = par ^ rp11;
-        rp12  = par ^ rp13;
-        rp14  = par ^ rp15;
+Odd replaced::
+
+          if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+
+with::
+
+          if (i & 0x01) rp5 ^= cur;
+          if (i & 0x02) rp7 ^= cur;
+          if (i & 0x04) rp9 ^= cur;
+          if (i & 0x08) rp11 ^= cur;
+          if (i & 0x10) rp13 ^= cur;
+          if (i & 0x20) rp15 ^= cur;
+
+and outside the loop added::
+
+          rp4  = par ^ rp5;
+          rp6  = par ^ rp7;
+          rp8  = par ^ rp9;
+          rp10  = par ^ rp11;
+          rp12  = par ^ rp13;
+          rp14  = par ^ rp15;
 
 And after that the code takes about 30% more time, although the number of
 statements is reduced. This is also reflected in the assembly code.
@@ -448,7 +477,7 @@ Attempt 4
 =========
 
 Unrolled the loop 1, 2, 3 and 4 times.
-For 4 the code starts with:
+For 4 the code starts with::
 
     for (i = 0; i < 4; i++)
     {
@@ -471,8 +500,11 @@ Analysis 4
 ==========
 
 Unrolling once gains about 15%
+
 Unrolling twice keeps the gain at about 15%
+
 Unrolling three times gives a gain of 30% compared to attempt 2.
+
 Unrolling four times gives a marginal improvement compared to unrolling
 three times.
 
@@ -492,8 +524,10 @@ Attempt 5
 
 Effectively so all odd digit rp assignments in the loop were removed.
 This included the else clause of the if statements.
-Of course after the loop we need to correct things by adding code like:
+Of course after the loop we need to correct things by adding code like::
+
     rp5 = par ^ rp4;
+
 Also the initial assignments (rp5 = 0; etc) could be removed.
 Along the line I also removed the initialisation of rp0/1/2/3.
 
@@ -513,7 +547,7 @@ statement. Time for yet another version!
 Attempt 6
 =========
 
-THe code within the for loop was changed to:
+THe code within the for loop was changed to::
 
     for (i = 0; i < 4; i++)
     {
@@ -564,13 +598,17 @@ million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
-places with statements:
-rp4 ^= cur; rp6 ^= cur;
+places with statements::
+
+	rp4 ^= cur; rp6 ^= cur;
+
 It seems more efficient to also maintain a variable rp4_6 in the while
 loop; This eliminates 3 statements per loop. Of course after the loop we
-need to correct by adding:
-    rp4 ^= rp4_6;
-    rp6 ^= rp4_6
+need to correct by adding::
+
+	rp4 ^= rp4_6;
+	rp6 ^= rp4_6
+
 Furthermore there are 4 sequential assignments to rp8. This can be
 encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
@@ -582,7 +620,7 @@ Time for a new test!
 Attempt 7
 =========
 
-The new code now looks like:
+The new code now looks like::
 
     for (i = 0; i < 4; i++)
     {
@@ -644,9 +682,12 @@ Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
 We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
+
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
-in the result byte and then do something like
+in the result byte and then do something like::
+
     code[0] |= (code[0] << 1);
+
 Lets test this.
 
 
@@ -657,11 +698,13 @@ Changed the code but again this slightly degrades performance. Tried all
 kind of other things, like having dedicated parity arrays to avoid the
 shift after parity[rp7] << 7; No gain.
 Change the lookup using the parity array by using shift operators (e.g.
-replace parity[rp7] << 7 with:
-rp7 ^= (rp7 << 4);
-rp7 ^= (rp7 << 2);
-rp7 ^= (rp7 << 1);
-rp7 &= 0x80;
+replace parity[rp7] << 7 with::
+
+	rp7 ^= (rp7 << 4);
+	rp7 ^= (rp7 << 2);
+	rp7 ^= (rp7 << 1);
+	rp7 &= 0x80;
+
 No gain.
 
 The only marginal change was inverting the parity bits, so we can remove
@@ -683,13 +726,16 @@ Correcting errors
 
 For correcting errors I again used the ST application note as a starter,
 but I also peeked at the existing code.
+
 The algorithm itself is pretty straightforward. Just xor the given and
 the calculated ecc. If all bytes are 0 there is no problem. If 11 bits
 are 1 we have one correctable bit error. If there is 1 bit 1, we have an
 error in the given ecc code.
+
 It proved to be fastest to do some table lookups. Performance gain
 introduced by this is about a factor 2 on my system when a repair had to
 be done, and 1% or so if no repair had to be done.
+
 Code size increased from 330 bytes to 686 bytes for this function.
 (gcc 4.2, -O3)
 
@@ -700,8 +746,10 @@ Conclusion
 The gain when calculating the ecc is tremendous. Om my development hardware
 a speedup of a factor of 18 for ecc calculation was achieved. On a test on an
 embedded system with a MIPS core a factor 7 was obtained.
+
 On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor
 5 (big endian mode, gcc 4.1.2, -O3)
+
 For correction not much gain could be obtained (as bitflips are rare). Then
 again there are also much less cycles spent there.
 
@@ -711,4 +759,5 @@ out of it with an assembler program, but due to pipeline behaviour etc
 this is very tricky (at least for intel hw).
 
 Author: Frans Meulenbroeks
+
 Copyright (C) 2008 Koninklijke Philips Electronics NV.
diff --git a/Documentation/mtd/spi-nor.txt b/Documentation/driver-api/mtd/spi-nor.rst
index da1fbff5a24c..f5333e3bf486 100644
--- a/Documentation/mtd/spi-nor.txt
+++ b/Documentation/driver-api/mtd/spi-nor.rst
@@ -1,5 +1,6 @@
-                          SPI NOR framework
-               ============================================
+=================
+SPI NOR framework
+=================
 
 Part I - Why do we need this framework?
 ---------------------------------------
@@ -23,7 +24,7 @@ This framework just adds a new layer between the MTD and the SPI bus driver.
 With this new layer, the SPI NOR controller driver does not depend on the
 m25p80 code anymore.
 
-   Before this framework, the layer is like:
+Before this framework, the layer is like::
 
                    MTD
          ------------------------
diff --git a/Documentation/driver-api/nfc/index.rst b/Documentation/driver-api/nfc/index.rst
new file mode 100644
index 000000000000..b6e9eedbff29
--- /dev/null
+++ b/Documentation/driver-api/nfc/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Near Field Communication
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   nfc-hci
+   nfc-pn544
diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/driver-api/nfc/nfc-hci.rst
index 0dc078cab972..eb8a1a14e919 100644
--- a/Documentation/nfc/nfc-hci.txt
+++ b/Documentation/driver-api/nfc/nfc-hci.rst
@@ -1,7 +1,9 @@
+========================
 HCI backend for NFC Core
+========================
 
-Author: Eric Lapuyade, Samuel Ortiz
-Contact: eric.lapuyade@intel.com, samuel.ortiz@intel.com
+- Author: Eric Lapuyade, Samuel Ortiz
+- Contact: eric.lapuyade@intel.com, samuel.ortiz@intel.com
 
 General
 -------
@@ -24,12 +26,13 @@ HCI events can also be received from the host controller. They will be handled
 and a translation will be forwarded to NFC Core as needed. There are hooks to
 let the HCI driver handle proprietary events or override standard behavior.
 HCI uses 2 execution contexts:
+
 - one for executing commands : nfc_hci_msg_tx_work(). Only one command
-can be executing at any given moment.
+  can be executing at any given moment.
 - one for dispatching received events and commands : nfc_hci_msg_rx_work().
 
-HCI Session initialization:
----------------------------
+HCI Session initialization
+--------------------------
 
 The Session initialization is an HCI standard which must unfortunately
 support proprietary gates. This is the reason why the driver will pass a list
@@ -58,9 +61,9 @@ HCI Management
 --------------
 
 A driver would normally register itself with HCI and provide the following
-entry points:
+entry points::
 
-struct nfc_hci_ops {
+  struct nfc_hci_ops {
 	int (*open)(struct nfc_hci_dev *hdev);
 	void (*close)(struct nfc_hci_dev *hdev);
 	int (*hci_ready) (struct nfc_hci_dev *hdev);
@@ -82,38 +85,38 @@ struct nfc_hci_ops {
 			      struct nfc_target *target);
 	int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
 			      struct sk_buff *skb);
-};
+  };
 
 - open() and close() shall turn the hardware on and off.
 - hci_ready() is an optional entry point that is called right after the hci
-session has been set up. The driver can use it to do additional initialization
-that must be performed using HCI commands.
+  session has been set up. The driver can use it to do additional initialization
+  that must be performed using HCI commands.
 - xmit() shall simply write a frame to the physical link.
 - start_poll() is an optional entrypoint that shall set the hardware in polling
-mode. This must be implemented only if the hardware uses proprietary gates or a
-mechanism slightly different from the HCI standard.
+  mode. This must be implemented only if the hardware uses proprietary gates or a
+  mechanism slightly different from the HCI standard.
 - dep_link_up() is called after a p2p target has been detected, to finish
-the p2p connection setup with hardware parameters that need to be passed back
-to nfc core.
+  the p2p connection setup with hardware parameters that need to be passed back
+  to nfc core.
 - dep_link_down() is called to bring the p2p link down.
 - target_from_gate() is an optional entrypoint to return the nfc protocols
-corresponding to a proprietary gate.
+  corresponding to a proprietary gate.
 - complete_target_discovered() is an optional entry point to let the driver
-perform additional proprietary processing necessary to auto activate the
-discovered target.
+  perform additional proprietary processing necessary to auto activate the
+  discovered target.
 - im_transceive() must be implemented by the driver if proprietary HCI commands
-are required to send data to the tag. Some tag types will require custom
-commands, others can be written to using the standard HCI commands. The driver
-can check the tag type and either do proprietary processing, or return 1 to ask
-for standard processing. The data exchange command itself must be sent
-asynchronously.
+  are required to send data to the tag. Some tag types will require custom
+  commands, others can be written to using the standard HCI commands. The driver
+  can check the tag type and either do proprietary processing, or return 1 to ask
+  for standard processing. The data exchange command itself must be sent
+  asynchronously.
 - tm_send() is called to send data in the case of a p2p connection
 - check_presence() is an optional entry point that will be called regularly
-by the core to check that an activated tag is still in the field. If this is
-not implemented, the core will not be able to push tag_lost events to the user
-space
+  by the core to check that an activated tag is still in the field. If this is
+  not implemented, the core will not be able to push tag_lost events to the user
+  space
 - event_received() is called to handle an event coming from the chip. Driver
-can handle the event or return 1 to let HCI attempt standard processing.
+  can handle the event or return 1 to let HCI attempt standard processing.
 
 On the rx path, the driver is responsible to push incoming HCP frames to HCI
 using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling
@@ -122,20 +125,23 @@ This must be done from a context that can sleep.
 PHY Management
 --------------
 
-The physical link (i2c, ...) management is defined by the following structure:
+The physical link (i2c, ...) management is defined by the following structure::
 
-struct nfc_phy_ops {
+  struct nfc_phy_ops {
 	int (*write)(void *dev_id, struct sk_buff *skb);
 	int (*enable)(void *dev_id);
 	void (*disable)(void *dev_id);
-};
-
-enable(): turn the phy on (power on), make it ready to transfer data
-disable(): turn the phy off
-write(): Send a data frame to the chip. Note that to enable higher
-layers such as an llc to store the frame for re-emission, this function must
-not alter the skb. It must also not return a positive result (return 0 for
-success, negative for failure).
+  };
+
+enable():
+	turn the phy on (power on), make it ready to transfer data
+disable():
+	turn the phy off
+write():
+	Send a data frame to the chip. Note that to enable higher
+	layers such as an llc to store the frame for re-emission, this
+	function must not alter the skb. It must also not return a positive
+	result (return 0 for success, negative for failure).
 
 Data coming from the chip shall be sent directly to nfc_hci_recv_frame().
 
@@ -145,9 +151,9 @@ LLC
 Communication between the CPU and the chip often requires some link layer
 protocol. Those are isolated as modules managed by the HCI layer. There are
 currently two modules : nop (raw transfert) and shdlc.
-A new llc must implement the following functions:
+A new llc must implement the following functions::
 
-struct nfc_llc_ops {
+  struct nfc_llc_ops {
 	void *(*init) (struct nfc_hci_dev *hdev, xmit_to_drv_t xmit_to_drv,
 		       rcv_to_hci_t rcv_to_hci, int tx_headroom,
 		       int tx_tailroom, int *rx_headroom, int *rx_tailroom,
@@ -157,17 +163,25 @@ struct nfc_llc_ops {
 	int (*stop) (struct nfc_llc *llc);
 	void (*rcv_from_drv) (struct nfc_llc *llc, struct sk_buff *skb);
 	int (*xmit_from_hci) (struct nfc_llc *llc, struct sk_buff *skb);
-};
-
-- init() : allocate and init your private storage
-- deinit() : cleanup
-- start() : establish the logical connection
-- stop () : terminate the logical connection
-- rcv_from_drv() : handle data coming from the chip, going to HCI
-- xmit_from_hci() : handle data sent by HCI, going to the chip
+  };
+
+init():
+	allocate and init your private storage
+deinit():
+	cleanup
+start():
+	establish the logical connection
+stop ():
+	terminate the logical connection
+rcv_from_drv():
+	handle data coming from the chip, going to HCI
+xmit_from_hci():
+	handle data sent by HCI, going to the chip
 
 The llc must be registered with nfc before it can be used. Do that by
-calling nfc_llc_register(const char *name, struct nfc_llc_ops *ops);
+calling::
+
+	nfc_llc_register(const char *name, struct nfc_llc_ops *ops);
 
 Again, note that the llc does not handle the physical link. It is thus very
 easy to mix any physical link with any llc for a given chip driver.
@@ -187,26 +201,32 @@ fast, cannot sleep. sends incoming frames to HCI where they are passed to
 the current llc. In case of shdlc, the frame is queued in shdlc rx queue.
 
 - SHDLC State Machine worker (SMW)
-Only when llc_shdlc is used: handles shdlc rx & tx queues.
-Dispatches HCI cmd responses.
+
+  Only when llc_shdlc is used: handles shdlc rx & tx queues.
+
+  Dispatches HCI cmd responses.
 
 - HCI Tx Cmd worker (MSGTXWQ)
-Serializes execution of HCI commands. Completes execution in case of response
-timeout.
+
+  Serializes execution of HCI commands.
+
+  Completes execution in case of response timeout.
 
 - HCI Rx worker (MSGRXWQ)
-Dispatches incoming HCI commands or events.
+
+  Dispatches incoming HCI commands or events.
 
 - Syscall context from a userspace call (SYSCALL)
-Any entrypoint in HCI called from NFC Core
+
+  Any entrypoint in HCI called from NFC Core
 
 Workflow executing an HCI command (using shdlc)
 -----------------------------------------------
 
 Executing an HCI command can easily be performed synchronously using the
-following API:
+following API::
 
-int nfc_hci_send_cmd (struct nfc_hci_dev *hdev, u8 gate, u8 cmd,
+  int nfc_hci_send_cmd (struct nfc_hci_dev *hdev, u8 gate, u8 cmd,
 			const u8 *param, size_t param_len, struct sk_buff **skb)
 
 The API must be invoked from a context that can sleep. Most of the time, this
@@ -234,11 +254,11 @@ waiting command execution. Response processing involves invoking the completion
 callback that was provided by nfc_hci_msg_tx_work() when it sent the command.
 The completion callback will then wake the syscall context.
 
-It is also possible to execute the command asynchronously using this API:
+It is also possible to execute the command asynchronously using this API::
 
-static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
-			       const u8 *param, size_t param_len,
-			       data_exchange_cb_t cb, void *cb_context)
+  static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
+				       const u8 *param, size_t param_len,
+				       data_exchange_cb_t cb, void *cb_context)
 
 The workflow is the same, except that the API call returns immediately, and
 the callback will be called with the result from the SMW context.
@@ -268,23 +288,24 @@ went wrong below and know that expected events will probably never happen.
 Handling of these errors is done as follows:
 
 - driver (pn544) fails to deliver an incoming frame: it stores the error such
-that any subsequent call to the driver will result in this error. Then it calls
-the standard nfc_shdlc_recv_frame() with a NULL argument to report the problem
-above. shdlc stores a EREMOTEIO sticky status, which will trigger SMW to
-report above in turn.
+  that any subsequent call to the driver will result in this error. Then it
+  calls the standard nfc_shdlc_recv_frame() with a NULL argument to report the
+  problem above. shdlc stores a EREMOTEIO sticky status, which will trigger
+  SMW to report above in turn.
 
 - SMW is basically a background thread to handle incoming and outgoing shdlc
-frames. This thread will also check the shdlc sticky status and report to HCI
-when it discovers it is not able to run anymore because of an unrecoverable
-error that happened within shdlc or below. If the problem occurs during shdlc
-connection, the error is reported through the connect completion.
+  frames. This thread will also check the shdlc sticky status and report to HCI
+  when it discovers it is not able to run anymore because of an unrecoverable
+  error that happened within shdlc or below. If the problem occurs during shdlc
+  connection, the error is reported through the connect completion.
 
 - HCI: if an internal HCI error happens (frame is lost), or HCI is reported an
-error from a lower layer, HCI will either complete the currently executing
-command with that error, or notify NFC Core directly if no command is executing.
+  error from a lower layer, HCI will either complete the currently executing
+  command with that error, or notify NFC Core directly if no command is
+  executing.
 
 - NFC Core: when NFC Core is notified of an error from below and polling is
-active, it will send a tag discovered event with an empty tag list to the user
-space to let it know that the poll operation will never be able to detect a tag.
-If polling is not active and the error was sticky, lower levels will return it
-at next invocation.
+  active, it will send a tag discovered event with an empty tag list to the user
+  space to let it know that the poll operation will never be able to detect a
+  tag. If polling is not active and the error was sticky, lower levels will
+  return it at next invocation.
diff --git a/Documentation/nfc/nfc-pn544.txt b/Documentation/driver-api/nfc/nfc-pn544.rst
index b36ca14ca2d6..6b2d8aae0c4e 100644
--- a/Documentation/nfc/nfc-pn544.txt
+++ b/Documentation/driver-api/nfc/nfc-pn544.rst
@@ -1,5 +1,7 @@
-Kernel driver for the NXP Semiconductors PN544 Near Field
-Communication chip
+============================================================================
+Kernel driver for the NXP Semiconductors PN544 Near Field Communication chip
+============================================================================
+
 
 General
 -------
diff --git a/Documentation/ntb.txt b/Documentation/driver-api/ntb.rst
index 074a423c853c..074a423c853c 100644
--- a/Documentation/ntb.txt
+++ b/Documentation/driver-api/ntb.rst
diff --git a/Documentation/nvdimm/btt.txt b/Documentation/driver-api/nvdimm/btt.rst
index e293fb664924..107395c042ae 100644
--- a/Documentation/nvdimm/btt.txt
+++ b/Documentation/driver-api/nvdimm/btt.rst
@@ -1,9 +1,10 @@
+=============================
 BTT - Block Translation Table
 =============================
 
 
 1. Introduction
----------------
+===============
 
 Persistent memory based storage is able to perform IO at byte (or more
 accurately, cache line) granularity. However, we often want to expose such
@@ -25,7 +26,7 @@ provides atomic sector updates.
 
 
 2. Static Layout
-----------------
+================
 
 The underlying storage on which a BTT can be laid out is not limited in any way.
 The BTT, however, splits the available space into chunks of up to 512 GiB,
@@ -33,43 +34,43 @@ called "Arenas".
 
 Each arena follows the same layout for its metadata, and all references in an
 arena are internal to it (with the exception of one field that points to the
-next arena). The following depicts the "On-disk" metadata layout:
-
-
-  Backing Store     +------->  Arena
-+---------------+   |   +------------------+
-|               |   |   | Arena info block |
-|    Arena 0    +---+   |       4K         |
-|     512G      |       +------------------+
-|               |       |                  |
-+---------------+       |                  |
-|               |       |                  |
-|    Arena 1    |       |   Data Blocks    |
-|     512G      |       |                  |
-|               |       |                  |
-+---------------+       |                  |
-|       .       |       |                  |
-|       .       |       |                  |
-|       .       |       |                  |
-|               |       |                  |
-|               |       |                  |
-+---------------+       +------------------+
-                        |                  |
-                        |     BTT Map      |
-                        |                  |
-                        |                  |
-                        +------------------+
-                        |                  |
-                        |     BTT Flog     |
-                        |                  |
-                        +------------------+
-                        | Info block copy  |
-                        |       4K         |
-                        +------------------+
+next arena). The following depicts the "On-disk" metadata layout::
+
+
+    Backing Store     +------->  Arena
+  +---------------+   |   +------------------+
+  |               |   |   | Arena info block |
+  |    Arena 0    +---+   |       4K         |
+  |     512G      |       +------------------+
+  |               |       |                  |
+  +---------------+       |                  |
+  |               |       |                  |
+  |    Arena 1    |       |   Data Blocks    |
+  |     512G      |       |                  |
+  |               |       |                  |
+  +---------------+       |                  |
+  |       .       |       |                  |
+  |       .       |       |                  |
+  |       .       |       |                  |
+  |               |       |                  |
+  |               |       |                  |
+  +---------------+       +------------------+
+                          |                  |
+                          |     BTT Map      |
+                          |                  |
+                          |                  |
+                          +------------------+
+                          |                  |
+                          |     BTT Flog     |
+                          |                  |
+                          +------------------+
+                          | Info block copy  |
+                          |       4K         |
+                          +------------------+
 
 
 3. Theory of Operation
-----------------------
+======================
 
 
 a. The BTT Map
@@ -79,31 +80,37 @@ The map is a simple lookup/indirection table that maps an LBA to an internal
 block. Each map entry is 32 bits. The two most significant bits are special
 flags, and the remaining form the internal block number.
 
+======== =============================================================
 Bit      Description
-31 - 30	: Error and Zero flags - Used in the following way:
-	 Bit		      Description
-	31 30
-	-----------------------------------------------------------------------
-	 00	Initial state. Reads return zeroes; Premap = Postmap
-	 01	Zero state: Reads return zeroes
-	 10	Error state: Reads fail; Writes clear 'E' bit
-	 11	Normal Block – has valid postmap
+======== =============================================================
+31 - 30	 Error and Zero flags - Used in the following way::
 
+	   == ==  ====================================================
+	   31 30  Description
+	   == ==  ====================================================
+	   0  0	  Initial state. Reads return zeroes; Premap = Postmap
+	   0  1	  Zero state: Reads return zeroes
+	   1  0	  Error state: Reads fail; Writes clear 'E' bit
+	   1  1	  Normal Block – has valid postmap
+	   == ==  ====================================================
 
-29 - 0	: Mappings to internal 'postmap' blocks
+29 - 0	 Mappings to internal 'postmap' blocks
+======== =============================================================
 
 
 Some of the terminology that will be subsequently used:
 
-External LBA  : LBA as made visible to upper layers.
-ABA           : Arena Block Address - Block offset/number within an arena
-Premap ABA    : The block offset into an arena, which was decided upon by range
+============	================================================================
+External LBA	LBA as made visible to upper layers.
+ABA		Arena Block Address - Block offset/number within an arena
+Premap ABA	The block offset into an arena, which was decided upon by range
 		checking the External LBA
-Postmap ABA   : The block number in the "Data Blocks" area obtained after
+Postmap ABA	The block number in the "Data Blocks" area obtained after
 		indirection from the map
-nfree	      : The number of free blocks that are maintained at any given time.
+nfree		The number of free blocks that are maintained at any given time.
 		This is the number of concurrent writes that can happen to the
 		arena.
+============	================================================================
 
 
 For example, after adding a BTT, we surface a disk of 1024G. We get a read for
@@ -121,19 +128,21 @@ i.e. Every write goes to a "free" block. A running list of free blocks is
 maintained in the form of the BTT flog. 'Flog' is a combination of the words
 "free list" and "log". The flog contains 'nfree' entries, and an entry contains:
 
-lba     : The premap ABA that is being written to
-old_map : The old postmap ABA - after 'this' write completes, this will be a
+========  =====================================================================
+lba       The premap ABA that is being written to
+old_map   The old postmap ABA - after 'this' write completes, this will be a
 	  free block.
-new_map : The new postmap ABA. The map will up updated to reflect this
+new_map   The new postmap ABA. The map will up updated to reflect this
 	  lba->postmap_aba mapping, but we log it here in case we have to
 	  recover.
-seq	: Sequence number to mark which of the 2 sections of this flog entry is
+seq	  Sequence number to mark which of the 2 sections of this flog entry is
 	  valid/newest. It cycles between 01->10->11->01 (binary) under normal
 	  operation, with 00 indicating an uninitialized state.
-lba'	: alternate lba entry
-old_map': alternate old postmap entry
-new_map': alternate new postmap entry
-seq'	: alternate sequence number.
+lba'	  alternate lba entry
+old_map'  alternate old postmap entry
+new_map'  alternate new postmap entry
+seq'	  alternate sequence number.
+========  =====================================================================
 
 Each of the above fields is 32-bit, making one entry 32 bytes. Entries are also
 padded to 64 bytes to avoid cache line sharing or aliasing. Flog updates are
@@ -147,8 +156,10 @@ c. The concept of lanes
 
 While 'nfree' describes the number of concurrent IOs an arena can process
 concurrently, 'nlanes' is the number of IOs the BTT device as a whole can
-process.
- nlanes = min(nfree, num_cpus)
+process::
+
+	nlanes = min(nfree, num_cpus)
+
 A lane number is obtained at the start of any IO, and is used for indexing into
 all the on-disk and in-memory data structures for the duration of the IO. If
 there are more CPUs than the max number of available lanes, than lanes are
@@ -180,10 +191,10 @@ e. In-memory data structure: map locks
 --------------------------------------
 
 Consider a case where two writer threads are writing to the same LBA. There can
-be a race in the following sequence of steps:
+be a race in the following sequence of steps::
 
-free[lane] = map[premap_aba]
-map[premap_aba] = postmap_aba
+	free[lane] = map[premap_aba]
+	map[premap_aba] = postmap_aba
 
 Both threads can update their respective free[lane] with the same old, freed
 postmap_aba. This has made the layout inconsistent by losing a free entry, and
@@ -202,6 +213,7 @@ On startup, we analyze the BTT flog to create our list of free blocks. We walk
 through all the entries, and for each lane, of the set of two possible
 'sections', we always look at the most recent one only (based on the sequence
 number). The reconstruction rules/steps are simple:
+
 - Read map[log_entry.lba].
 - If log_entry.new matches the map entry, then log_entry.old is free.
 - If log_entry.new does not match the map entry, then log_entry.new is free.
@@ -228,7 +240,7 @@ Write:
 1.  Convert external LBA to Arena number + pre-map ABA
 2.  Get a lane (and take lane_lock)
 3.  Use lane to index into in-memory free list and obtain a new block, next flog
-        index, next sequence number
+    index, next sequence number
 4.  Scan the RTT to check if free block is present, and spin/wait if it is.
 5.  Write data to this free block
 6.  Read map to get the existing post-map ABA entry for this pre-map ABA
@@ -245,6 +257,7 @@ Write:
 An arena would be in an error state if any of the metadata is corrupted
 irrecoverably, either due to a bug or a media error. The following conditions
 indicate an error:
+
 - Info block checksum does not match (and recovering from the copy also fails)
 - All internal available blocks are not uniquely and entirely addressed by the
   sum of mapped blocks and free blocks (from the BTT flog).
@@ -263,11 +276,10 @@ The BTT can be set up on any disk (namespace) exposed by the libnvdimm subsystem
 (pmem, or blk mode). The easiest way to set up such a namespace is using the
 'ndctl' utility [1]:
 
-For example, the ndctl command line to setup a btt with a 4k sector size is:
+For example, the ndctl command line to setup a btt with a 4k sector size is::
 
     ndctl create-namespace -f -e namespace0.0 -m sector -l 4k
 
 See ndctl create-namespace --help for more options.
 
 [1]: https://github.com/pmem/ndctl
-
diff --git a/Documentation/driver-api/nvdimm/index.rst b/Documentation/driver-api/nvdimm/index.rst
new file mode 100644
index 000000000000..a4f8f98aeb94
--- /dev/null
+++ b/Documentation/driver-api/nvdimm/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Non-Volatile Memory Device (NVDIMM)
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   nvdimm
+   btt
+   security
diff --git a/Documentation/nvdimm/nvdimm.txt b/Documentation/driver-api/nvdimm/nvdimm.rst
index 1669f626b037..08f855cbb4e6 100644
--- a/Documentation/nvdimm/nvdimm.txt
+++ b/Documentation/driver-api/nvdimm/nvdimm.rst
@@ -1,8 +1,14 @@
-			  LIBNVDIMM: Non-Volatile Devices
-	      libnvdimm - kernel / libndctl - userspace helper library
-			   linux-nvdimm@lists.01.org
-				      v13
+===============================
+LIBNVDIMM: Non-Volatile Devices
+===============================
 
+libnvdimm - kernel / libndctl - userspace helper library
+
+linux-nvdimm@lists.01.org
+
+Version 13
+
+.. contents:
 
 	Glossary
 	Overview
@@ -40,49 +46,57 @@
 
 
 Glossary
---------
-
-PMEM: A system-physical-address range where writes are persistent.  A
-block device composed of PMEM is capable of DAX.  A PMEM address range
-may span an interleave of several DIMMs.
-
-BLK: A set of one or more programmable memory mapped apertures provided
-by a DIMM to access its media.  This indirection precludes the
-performance benefit of interleaving, but enables DIMM-bounded failure
-modes.
-
-DPA: DIMM Physical Address, is a DIMM-relative offset.  With one DIMM in
-the system there would be a 1:1 system-physical-address:DPA association.
-Once more DIMMs are added a memory controller interleave must be
-decoded to determine the DPA associated with a given
-system-physical-address.  BLK capacity always has a 1:1 relationship
-with a single-DIMM's DPA range.
-
-DAX: File system extensions to bypass the page cache and block layer to
-mmap persistent memory, from a PMEM block device, directly into a
-process address space.
-
-DSM: Device Specific Method: ACPI method to to control specific
-device - in this case the firmware.
-
-DCR: NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.
-It defines a vendor-id, device-id, and interface format for a given DIMM.
-
-BTT: Block Translation Table: Persistent memory is byte addressable.
-Existing software may have an expectation that the power-fail-atomicity
-of writes is at least one sector, 512 bytes.  The BTT is an indirection
-table with atomic update semantics to front a PMEM/BLK block device
-driver and present arbitrary atomic sector sizes.
-
-LABEL: Metadata stored on a DIMM device that partitions and identifies
-(persistently names) storage between PMEM and BLK.  It also partitions
-BLK storage to host BTTs with different parameters per BLK-partition.
-Note that traditional partition tables, GPT/MBR, are layered on top of a
-BLK or PMEM device.
+========
+
+PMEM:
+  A system-physical-address range where writes are persistent.  A
+  block device composed of PMEM is capable of DAX.  A PMEM address range
+  may span an interleave of several DIMMs.
+
+BLK:
+  A set of one or more programmable memory mapped apertures provided
+  by a DIMM to access its media.  This indirection precludes the
+  performance benefit of interleaving, but enables DIMM-bounded failure
+  modes.
+
+DPA:
+  DIMM Physical Address, is a DIMM-relative offset.  With one DIMM in
+  the system there would be a 1:1 system-physical-address:DPA association.
+  Once more DIMMs are added a memory controller interleave must be
+  decoded to determine the DPA associated with a given
+  system-physical-address.  BLK capacity always has a 1:1 relationship
+  with a single-DIMM's DPA range.
+
+DAX:
+  File system extensions to bypass the page cache and block layer to
+  mmap persistent memory, from a PMEM block device, directly into a
+  process address space.
+
+DSM:
+  Device Specific Method: ACPI method to to control specific
+  device - in this case the firmware.
+
+DCR:
+  NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.
+  It defines a vendor-id, device-id, and interface format for a given DIMM.
+
+BTT:
+  Block Translation Table: Persistent memory is byte addressable.
+  Existing software may have an expectation that the power-fail-atomicity
+  of writes is at least one sector, 512 bytes.  The BTT is an indirection
+  table with atomic update semantics to front a PMEM/BLK block device
+  driver and present arbitrary atomic sector sizes.
+
+LABEL:
+  Metadata stored on a DIMM device that partitions and identifies
+  (persistently names) storage between PMEM and BLK.  It also partitions
+  BLK storage to host BTTs with different parameters per BLK-partition.
+  Note that traditional partition tables, GPT/MBR, are layered on top of a
+  BLK or PMEM device.
 
 
 Overview
---------
+========
 
 The LIBNVDIMM subsystem provides support for three types of NVDIMMs, namely,
 PMEM, BLK, and NVDIMM devices that can simultaneously support both PMEM
@@ -96,19 +110,30 @@ accessible via BLK.  When that occurs a LABEL is needed to reserve DPA
 for exclusive access via one mode a time.
 
 Supporting Documents
-ACPI 6: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
-NVDIMM Namespace: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
-DSM Interface Example: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
-Driver Writer's Guide: http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
+--------------------
+
+ACPI 6:
+	http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
+NVDIMM Namespace:
+	http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
+DSM Interface Example:
+	http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+Driver Writer's Guide:
+	http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
 
 Git Trees
-LIBNVDIMM: https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git
-LIBNDCTL: https://github.com/pmem/ndctl.git
-PMEM: https://github.com/01org/prd
+---------
+
+LIBNVDIMM:
+	https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git
+LIBNDCTL:
+	https://github.com/pmem/ndctl.git
+PMEM:
+	https://github.com/01org/prd
 
 
 LIBNVDIMM PMEM and BLK
-------------------
+======================
 
 Prior to the arrival of the NFIT, non-volatile memory was described to a
 system in various ad-hoc ways.  Usually only the bare minimum was
@@ -122,38 +147,39 @@ For each NVDIMM access method (PMEM, BLK), LIBNVDIMM provides a block
 device driver:
 
     1. PMEM (nd_pmem.ko): Drives a system-physical-address range.  This
-    range is contiguous in system memory and may be interleaved (hardware
-    memory controller striped) across multiple DIMMs.  When interleaved the
-    platform may optionally provide details of which DIMMs are participating
-    in the interleave.
-
-    Note that while LIBNVDIMM describes system-physical-address ranges that may
-    alias with BLK access as ND_NAMESPACE_PMEM ranges and those without
-    alias as ND_NAMESPACE_IO ranges, to the nd_pmem driver there is no
-    distinction.  The different device-types are an implementation detail
-    that userspace can exploit to implement policies like "only interface
-    with address ranges from certain DIMMs".  It is worth noting that when
-    aliasing is present and a DIMM lacks a label, then no block device can
-    be created by default as userspace needs to do at least one allocation
-    of DPA to the PMEM range.  In contrast ND_NAMESPACE_IO ranges, once
-    registered, can be immediately attached to nd_pmem.
+       range is contiguous in system memory and may be interleaved (hardware
+       memory controller striped) across multiple DIMMs.  When interleaved the
+       platform may optionally provide details of which DIMMs are participating
+       in the interleave.
+
+       Note that while LIBNVDIMM describes system-physical-address ranges that may
+       alias with BLK access as ND_NAMESPACE_PMEM ranges and those without
+       alias as ND_NAMESPACE_IO ranges, to the nd_pmem driver there is no
+       distinction.  The different device-types are an implementation detail
+       that userspace can exploit to implement policies like "only interface
+       with address ranges from certain DIMMs".  It is worth noting that when
+       aliasing is present and a DIMM lacks a label, then no block device can
+       be created by default as userspace needs to do at least one allocation
+       of DPA to the PMEM range.  In contrast ND_NAMESPACE_IO ranges, once
+       registered, can be immediately attached to nd_pmem.
 
     2. BLK (nd_blk.ko): This driver performs I/O using a set of platform
-    defined apertures.  A set of apertures will access just one DIMM.
-    Multiple windows (apertures) allow multiple concurrent accesses, much like
-    tagged-command-queuing, and would likely be used by different threads or
-    different CPUs.
+       defined apertures.  A set of apertures will access just one DIMM.
+       Multiple windows (apertures) allow multiple concurrent accesses, much like
+       tagged-command-queuing, and would likely be used by different threads or
+       different CPUs.
+
+       The NFIT specification defines a standard format for a BLK-aperture, but
+       the spec also allows for vendor specific layouts, and non-NFIT BLK
+       implementations may have other designs for BLK I/O.  For this reason
+       "nd_blk" calls back into platform-specific code to perform the I/O.
 
-    The NFIT specification defines a standard format for a BLK-aperture, but
-    the spec also allows for vendor specific layouts, and non-NFIT BLK
-    implementations may have other designs for BLK I/O.  For this reason
-    "nd_blk" calls back into platform-specific code to perform the I/O.
-    One such implementation is defined in the "Driver Writer's Guide" and "DSM
-    Interface Example".
+       One such implementation is defined in the "Driver Writer's Guide" and "DSM
+       Interface Example".
 
 
 Why BLK?
---------
+========
 
 While PMEM provides direct byte-addressable CPU-load/store access to
 NVDIMM storage, it does not provide the best system RAS (recovery,
@@ -162,12 +188,15 @@ system-physical-address address causes a CPU exception while an access
 to a corrupted address through an BLK-aperture causes that block window
 to raise an error status in a register.  The latter is more aligned with
 the standard error model that host-bus-adapter attached disks present.
+
 Also, if an administrator ever wants to replace a memory it is easier to
 service a system at DIMM module boundaries.  Compare this to PMEM where
 data could be interleaved in an opaque hardware specific manner across
 several DIMMs.
 
 PMEM vs BLK
+-----------
+
 BLK-apertures solve these RAS problems, but their presence is also the
 major contributing factor to the complexity of the ND subsystem.  They
 complicate the implementation because PMEM and BLK alias in DPA space.
@@ -185,13 +214,14 @@ carved into an arbitrary number of BLK devices with discontiguous
 extents.
 
 BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
---------------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 One of the few
 reasons to allow multiple BLK namespaces per REGION is so that each
 BLK-namespace can be configured with a BTT with unique atomic sector
 sizes.  While a PMEM device can host a BTT the LABEL specification does
 not provide for a sector size to be specified for a PMEM namespace.
+
 This is due to the expectation that the primary usage model for PMEM is
 via DAX, and the BTT is incompatible with DAX.  However, for the cases
 where an application or filesystem still needs atomic sector update
@@ -200,52 +230,52 @@ LIBNVDIMM/NDCTL: Block Translation Table "btt"
 
 
 Example NVDIMM Platform
------------------------
+=======================
 
 For the remainder of this document the following diagram will be
-referenced for any example sysfs layouts.
-
-
-                             (a)               (b)           DIMM   BLK-REGION
-          +-------------------+--------+--------+--------+
-+------+  |       pm0.0       | blk2.0 | pm1.0  | blk2.1 |    0      region2
-| imc0 +--+- - - region0- - - +--------+        +--------+
-+--+---+  |       pm0.0       | blk3.0 | pm1.0  | blk3.1 |    1      region3
-   |      +-------------------+--------v        v--------+
-+--+---+                               |                 |
-| cpu0 |                                     region1
-+--+---+                               |                 |
-   |      +----------------------------^        ^--------+
-+--+---+  |           blk4.0           | pm1.0  | blk4.0 |    2      region4
-| imc1 +--+----------------------------|        +--------+
-+------+  |           blk5.0           | pm1.0  | blk5.0 |    3      region5
-          +----------------------------+--------+--------+
+referenced for any example sysfs layouts::
+
+
+                               (a)               (b)           DIMM   BLK-REGION
+            +-------------------+--------+--------+--------+
+  +------+  |       pm0.0       | blk2.0 | pm1.0  | blk2.1 |    0      region2
+  | imc0 +--+- - - region0- - - +--------+        +--------+
+  +--+---+  |       pm0.0       | blk3.0 | pm1.0  | blk3.1 |    1      region3
+     |      +-------------------+--------v        v--------+
+  +--+---+                               |                 |
+  | cpu0 |                                     region1
+  +--+---+                               |                 |
+     |      +----------------------------^        ^--------+
+  +--+---+  |           blk4.0           | pm1.0  | blk4.0 |    2      region4
+  | imc1 +--+----------------------------|        +--------+
+  +------+  |           blk5.0           | pm1.0  | blk5.0 |    3      region5
+            +----------------------------+--------+--------+
 
 In this platform we have four DIMMs and two memory controllers in one
 socket.  Each unique interface (BLK or PMEM) to DPA space is identified
 by a region device with a dynamically assigned id (REGION0 - REGION5).
 
     1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A
-    single PMEM namespace is created in the REGION0-SPA-range that spans most
-    of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
-    interleaved system-physical-address range is reclaimed as BLK-aperture
-    accessed space starting at DPA-offset (a) into each DIMM.  In that
-    reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
-    REGION3 where "blk2.0" and "blk3.0" are just human readable names that
-    could be set to any user-desired name in the LABEL.
+       single PMEM namespace is created in the REGION0-SPA-range that spans most
+       of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
+       interleaved system-physical-address range is reclaimed as BLK-aperture
+       accessed space starting at DPA-offset (a) into each DIMM.  In that
+       reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
+       REGION3 where "blk2.0" and "blk3.0" are just human readable names that
+       could be set to any user-desired name in the LABEL.
 
     2. In the last portion of DIMM0 and DIMM1 we have an interleaved
-    system-physical-address range, REGION1, that spans those two DIMMs as
-    well as DIMM2 and DIMM3.  Some of REGION1 is allocated to a PMEM namespace
-    named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for
-    each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and
-    "blk5.0".
+       system-physical-address range, REGION1, that spans those two DIMMs as
+       well as DIMM2 and DIMM3.  Some of REGION1 is allocated to a PMEM namespace
+       named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for
+       each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and
+       "blk5.0".
 
     3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1
-    interleaved system-physical-address range (i.e. the DPA address past
-    offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.
-    Note, that this example shows that BLK-aperture namespaces don't need to
-    be contiguous in DPA-space.
+       interleaved system-physical-address range (i.e. the DPA address past
+       offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.
+       Note, that this example shows that BLK-aperture namespaces don't need to
+       be contiguous in DPA-space.
 
     This bus is provided by the kernel under the device
     /sys/devices/platform/nfit_test.0 when CONFIG_NFIT_TEST is enabled and
@@ -254,7 +284,7 @@ by a region device with a dynamically assigned id (REGION0 - REGION5).
 
 
 LIBNVDIMM Kernel Device Model and LIBNDCTL Userspace API
-----------------------------------------------------
+========================================================
 
 What follows is a description of the LIBNVDIMM sysfs layout and a
 corresponding object hierarchy diagram as viewed through the LIBNDCTL
@@ -263,12 +293,18 @@ NVDIMM Platform which is also the LIBNVDIMM bus used in the LIBNDCTL unit
 test.
 
 LIBNDCTL: Context
+-----------------
+
 Every API call in the LIBNDCTL library requires a context that holds the
 logging parameters and other library instance state.  The library is
 based on the libabc template:
-https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git
+
+	https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git
 
 LIBNDCTL: instantiate a new library context example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
 
 	struct ndctl_ctx *ctx;
 
@@ -278,7 +314,7 @@ LIBNDCTL: instantiate a new library context example
 		return NULL;
 
 LIBNVDIMM/LIBNDCTL: Bus
--------------------
+-----------------------
 
 A bus has a 1:1 relationship with an NFIT.  The current expectation for
 ACPI based systems is that there is only ever one platform-global NFIT.
@@ -288,9 +324,10 @@ we use this capability to test multiple NFIT configurations in the unit
 test.
 
 LIBNVDIMM: control class device in /sys/class
+---------------------------------------------
 
 This character device accepts DSM messages to be passed to DIMM
-identified by its NFIT handle.
+identified by its NFIT handle::
 
 	/sys/class/nd/ndctl0
 	|-- dev
@@ -300,10 +337,15 @@ identified by its NFIT handle.
 
 
 LIBNVDIMM: bus
+--------------
+
+::
 
 	struct nvdimm_bus *nvdimm_bus_register(struct device *parent,
 	       struct nvdimm_bus_descriptor *nfit_desc);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- commands
 	|-- nd
@@ -324,7 +366,9 @@ LIBNVDIMM: bus
 	`-- wait_probe
 
 LIBNDCTL: bus enumeration example
-Find the bus handle that describes the bus from Example NVDIMM Platform
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Find the bus handle that describes the bus from Example NVDIMM Platform::
 
 	static struct ndctl_bus *get_bus_by_provider(struct ndctl_ctx *ctx,
 			const char *provider)
@@ -342,7 +386,7 @@ Find the bus handle that describes the bus from Example NVDIMM Platform
 
 
 LIBNVDIMM/LIBNDCTL: DIMM (NMEM)
----------------------------
+-------------------------------
 
 The DIMM device provides a character device for sending commands to
 hardware, and it is a container for LABELs.  If the DIMM is defined by
@@ -355,11 +399,16 @@ Range Mapping Structure", and there is no requirement that they actually
 be physical DIMMs, so we use a more generic name.
 
 LIBNVDIMM: DIMM (NMEM)
+^^^^^^^^^^^^^^^^^^^^^^
+
+::
 
 	struct nvdimm *nvdimm_create(struct nvdimm_bus *nvdimm_bus, void *provider_data,
 			const struct attribute_group **groups, unsigned long flags,
 			unsigned long *dsm_mask);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- nmem0
 	|   |-- available_slots
@@ -384,15 +433,20 @@ LIBNVDIMM: DIMM (NMEM)
 
 
 LIBNDCTL: DIMM enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Note, in this example we are assuming NFIT-defined DIMMs which are
 identified by an "nfit_handle" a 32-bit value where:
-Bit 3:0 DIMM number within the memory channel
-Bit 7:4 memory channel number
-Bit 11:8 memory controller ID
-Bit 15:12 socket ID (within scope of a Node controller if node controller is present)
-Bit 27:16 Node Controller ID
-Bit 31:28 Reserved
+
+   - Bit 3:0 DIMM number within the memory channel
+   - Bit 7:4 memory channel number
+   - Bit 11:8 memory controller ID
+   - Bit 15:12 socket ID (within scope of a Node controller if node
+     controller is present)
+   - Bit 27:16 Node Controller ID
+   - Bit 31:28 Reserved
+
+::
 
 	static struct ndctl_dimm *get_dimm_by_handle(struct ndctl_bus *bus,
 	       unsigned int handle)
@@ -413,7 +467,7 @@ Bit 31:28 Reserved
 	dimm = get_dimm_by_handle(bus, DIMM_HANDLE(0, 0, 0, 0, 0));
 
 LIBNVDIMM/LIBNDCTL: Region
-----------------------
+--------------------------
 
 A generic REGION device is registered for each PMEM range or BLK-aperture
 set.  Per the example there are 6 regions: 2 PMEM and 4 BLK-aperture
@@ -435,13 +489,15 @@ emits, "devtype" duplicates the DEVTYPE variable stored by udev at the
 at the 'add' event, and finally, the optional "spa_index" is provided in
 the case where the region is defined by a SPA.
 
-LIBNVDIMM: region
+LIBNVDIMM: region::
 
 	struct nd_region *nvdimm_pmem_region_create(struct nvdimm_bus *nvdimm_bus,
 			struct nd_region_desc *ndr_desc);
 	struct nd_region *nvdimm_blk_region_create(struct nvdimm_bus *nvdimm_bus,
 			struct nd_region_desc *ndr_desc);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- region0
 	|   |-- available_size
@@ -468,10 +524,11 @@ LIBNVDIMM: region
 	[..]
 
 LIBNDCTL: region enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Sample region retrieval routines based on NFIT-unique data like
 "spa_index" (interleave set id) for PMEM and "nfit_handle" (dimm id) for
-BLK.
+BLK::
 
 	static struct ndctl_region *get_pmem_region_by_spa_index(struct ndctl_bus *bus,
 			unsigned int spa_index)
@@ -518,33 +575,33 @@ REGION name generic and expects userspace to always consider the
 region-attributes for four reasons:
 
     1. There are already more than two REGION and "namespace" types.  For
-    PMEM there are two subtypes.  As mentioned previously we have PMEM where
-    the constituent DIMM devices are known and anonymous PMEM.  For BLK
-    regions the NFIT specification already anticipates vendor specific
-    implementations.  The exact distinction of what a region contains is in
-    the region-attributes not the region-name or the region-devtype.
+       PMEM there are two subtypes.  As mentioned previously we have PMEM where
+       the constituent DIMM devices are known and anonymous PMEM.  For BLK
+       regions the NFIT specification already anticipates vendor specific
+       implementations.  The exact distinction of what a region contains is in
+       the region-attributes not the region-name or the region-devtype.
 
     2. A region with zero child-namespaces is a possible configuration.  For
-    example, the NFIT allows for a DCR to be published without a
-    corresponding BLK-aperture.  This equates to a DIMM that can only accept
-    control/configuration messages, but no i/o through a descendant block
-    device.  Again, this "type" is advertised in the attributes ('mappings'
-    == 0) and the name does not tell you much.
+       example, the NFIT allows for a DCR to be published without a
+       corresponding BLK-aperture.  This equates to a DIMM that can only accept
+       control/configuration messages, but no i/o through a descendant block
+       device.  Again, this "type" is advertised in the attributes ('mappings'
+       == 0) and the name does not tell you much.
 
     3. What if a third major interface type arises in the future?  Outside
-    of vendor specific implementations, it's not difficult to envision a
-    third class of interface type beyond BLK and PMEM.  With a generic name
-    for the REGION level of the device-hierarchy old userspace
-    implementations can still make sense of new kernel advertised
-    region-types.  Userspace can always rely on the generic region
-    attributes like "mappings", "size", etc and the expected child devices
-    named "namespace".  This generic format of the device-model hierarchy
-    allows the LIBNVDIMM and LIBNDCTL implementations to be more uniform and
-    future-proof.
+       of vendor specific implementations, it's not difficult to envision a
+       third class of interface type beyond BLK and PMEM.  With a generic name
+       for the REGION level of the device-hierarchy old userspace
+       implementations can still make sense of new kernel advertised
+       region-types.  Userspace can always rely on the generic region
+       attributes like "mappings", "size", etc and the expected child devices
+       named "namespace".  This generic format of the device-model hierarchy
+       allows the LIBNVDIMM and LIBNDCTL implementations to be more uniform and
+       future-proof.
 
     4. There are more robust mechanisms for determining the major type of a
-    region than a device name.  See the next section, How Do I Determine the
-    Major Type of a Region?
+       region than a device name.  See the next section, How Do I Determine the
+       Major Type of a Region?
 
 How Do I Determine the Major Type of a Region?
 ----------------------------------------------
@@ -553,7 +610,8 @@ Outside of the blanket recommendation of "use libndctl", or simply
 looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
 "nstype" integer attribute, here are some other options.
 
-    1. module alias lookup:
+1. module alias lookup
+^^^^^^^^^^^^^^^^^^^^^^
 
     The whole point of region/namespace device type differentiation is to
     decide which block-device driver will attach to a given LIBNVDIMM namespace.
@@ -569,28 +627,31 @@ looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
     the resulting namespaces.  The output from module resolution is more
     accurate than a region-name or region-devtype.
 
-    2. udev:
+2. udev
+^^^^^^^
+
+    The kernel "devtype" is registered in the udev database::
 
-    The kernel "devtype" is registered in the udev database
-    # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
-    P: /devices/platform/nfit_test.0/ndbus0/region0
-    E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
-    E: DEVTYPE=nd_pmem
-    E: MODALIAS=nd:t2
-    E: SUBSYSTEM=nd
+	# udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
+	P: /devices/platform/nfit_test.0/ndbus0/region0
+	E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
+	E: DEVTYPE=nd_pmem
+	E: MODALIAS=nd:t2
+	E: SUBSYSTEM=nd
 
-    # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
-    P: /devices/platform/nfit_test.0/ndbus0/region4
-    E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
-    E: DEVTYPE=nd_blk
-    E: MODALIAS=nd:t3
-    E: SUBSYSTEM=nd
+	# udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
+	P: /devices/platform/nfit_test.0/ndbus0/region4
+	E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
+	E: DEVTYPE=nd_blk
+	E: MODALIAS=nd:t3
+	E: SUBSYSTEM=nd
 
     ...and is available as a region attribute, but keep in mind that the
     "devtype" does not indicate sub-type variations and scripts should
     really be understanding the other attributes.
 
-    3. type specific attributes:
+3. type specific attributes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
     As it currently stands a BLK-aperture region will never have a
     "nfit/spa_index" attribute, but neither will a non-NFIT PMEM region.  A
@@ -600,7 +661,7 @@ looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
 
 
 LIBNVDIMM/LIBNDCTL: Namespace
--------------------------
+-----------------------------
 
 A REGION, after resolving DPA aliasing and LABEL specified boundaries,
 surfaces one or more "namespace" devices.  The arrival of a "namespace"
@@ -608,12 +669,14 @@ device currently triggers either the nd_blk or nd_pmem driver to load
 and register a disk/block device.
 
 LIBNVDIMM: namespace
+^^^^^^^^^^^^^^^^^^^^
+
 Here is a sample layout from the three major types of NAMESPACE where
 namespace0.0 represents DIMM-info-backed PMEM (note that it has a 'uuid'
 attribute), namespace2.0 represents a BLK namespace (note it has a
 'sector_size' attribute) that, and namespace6.0 represents an anonymous
 PMEM namespace (note that has no 'uuid' attribute due to not support a
-LABEL).
+LABEL)::
 
 	/sys/devices/platform/nfit_test.0/ndbus0/region0/namespace0.0
 	|-- alt_name
@@ -656,76 +719,84 @@ LABEL).
 	`-- uevent
 
 LIBNDCTL: namespace enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Namespaces are indexed relative to their parent region, example below.
 These indexes are mostly static from boot to boot, but subsystem makes
 no guarantees in this regard.  For a static namespace identifier use its
 'uuid' attribute.
 
-static struct ndctl_namespace *get_namespace_by_id(struct ndctl_region *region,
-                unsigned int id)
-{
-        struct ndctl_namespace *ndns;
+::
 
-        ndctl_namespace_foreach(region, ndns)
-                if (ndctl_namespace_get_id(ndns) == id)
-                        return ndns;
+  static struct ndctl_namespace
+  *get_namespace_by_id(struct ndctl_region *region, unsigned int id)
+  {
+          struct ndctl_namespace *ndns;
 
-        return NULL;
-}
+          ndctl_namespace_foreach(region, ndns)
+                  if (ndctl_namespace_get_id(ndns) == id)
+                          return ndns;
+
+          return NULL;
+  }
 
 LIBNDCTL: namespace creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Idle namespaces are automatically created by the kernel if a given
 region has enough available capacity to create a new namespace.
 Namespace instantiation involves finding an idle namespace and
 configuring it.  For the most part the setting of namespace attributes
 can occur in any order, the only constraint is that 'uuid' must be set
 before 'size'.  This enables the kernel to track DPA allocations
-internally with a static identifier.
+internally with a static identifier::
 
-static int configure_namespace(struct ndctl_region *region,
-                struct ndctl_namespace *ndns,
-                struct namespace_parameters *parameters)
-{
-        char devname[50];
+  static int configure_namespace(struct ndctl_region *region,
+                  struct ndctl_namespace *ndns,
+                  struct namespace_parameters *parameters)
+  {
+          char devname[50];
 
-        snprintf(devname, sizeof(devname), "namespace%d.%d",
-                        ndctl_region_get_id(region), paramaters->id);
+          snprintf(devname, sizeof(devname), "namespace%d.%d",
+                          ndctl_region_get_id(region), paramaters->id);
 
-        ndctl_namespace_set_alt_name(ndns, devname);
-        /* 'uuid' must be set prior to setting size! */
-        ndctl_namespace_set_uuid(ndns, paramaters->uuid);
-        ndctl_namespace_set_size(ndns, paramaters->size);
-        /* unlike pmem namespaces, blk namespaces have a sector size */
-        if (parameters->lbasize)
-                ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
-        ndctl_namespace_enable(ndns);
-}
+          ndctl_namespace_set_alt_name(ndns, devname);
+          /* 'uuid' must be set prior to setting size! */
+          ndctl_namespace_set_uuid(ndns, paramaters->uuid);
+          ndctl_namespace_set_size(ndns, paramaters->size);
+          /* unlike pmem namespaces, blk namespaces have a sector size */
+          if (parameters->lbasize)
+                  ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
+          ndctl_namespace_enable(ndns);
+  }
 
 
 Why the Term "namespace"?
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
     1. Why not "volume" for instance?  "volume" ran the risk of confusing
-    ND (libnvdimm subsystem) to a volume manager like device-mapper.
+       ND (libnvdimm subsystem) to a volume manager like device-mapper.
 
     2. The term originated to describe the sub-devices that can be created
-    within a NVME controller (see the nvme specification:
-    http://www.nvmexpress.org/specifications/), and NFIT namespaces are
-    meant to parallel the capabilities and configurability of
-    NVME-namespaces.
+       within a NVME controller (see the nvme specification:
+       http://www.nvmexpress.org/specifications/), and NFIT namespaces are
+       meant to parallel the capabilities and configurability of
+       NVME-namespaces.
 
 
 LIBNVDIMM/LIBNDCTL: Block Translation Table "btt"
----------------------------------------------
+-------------------------------------------------
 
 A BTT (design document: http://pmem.io/2014/09/23/btt.html) is a stacked
 block device driver that fronts either the whole block device or a
 partition of a block device emitted by either a PMEM or BLK NAMESPACE.
 
 LIBNVDIMM: btt layout
+^^^^^^^^^^^^^^^^^^^^^
+
 Every region will start out with at least one BTT device which is the
 seed device.  To activate it set the "namespace", "uuid", and
 "sector_size" attributes and then bind the device to the nd_pmem or
-nd_blk driver depending on the region type.
+nd_blk driver depending on the region type::
 
 	/sys/devices/platform/nfit_test.1/ndbus0/region0/btt0/
 	|-- namespace
@@ -739,10 +810,12 @@ nd_blk driver depending on the region type.
 	`-- uuid
 
 LIBNDCTL: btt creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Similar to namespaces an idle BTT device is automatically created per
 region.  Each time this "seed" btt device is configured and enabled a new
 seed is created.  Creating a BTT configuration involves two steps of
-finding and idle BTT and assigning it to consume a PMEM or BLK namespace.
+finding and idle BTT and assigning it to consume a PMEM or BLK namespace::
 
 	static struct ndctl_btt *get_idle_btt(struct ndctl_region *region)
 	{
@@ -787,29 +860,28 @@ Summary LIBNDCTL Diagram
 ------------------------
 
 For the given example above, here is the view of the objects as seen by the
-LIBNDCTL API:
-            +---+
-            |CTX|    +---------+   +--------------+  +---------------+
-            +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
-              |    | +---------+   +--------------+  +---------------+
-+-------+     |    | +---------+   +--------------+  +---------------+
-| DIMM0 <-+   |    +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
-+-------+ |   |    | +---------+   +--------------+  +---------------+
-| DIMM1 <-+ +-v--+ | +---------+   +--------------+  +---------------+
-+-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6  "blk2.0" |
-| DIMM2 <-+ +----+ | +---------+ | +--------------+  +----------------------+
-+-------+ |        |             +-> NAMESPACE2.1 +--> ND5  "blk2.1" | BTT2 |
-| DIMM3 <-+        |               +--------------+  +----------------------+
-+-------+          | +---------+   +--------------+  +---------------+
-                   +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4  "blk3.0" |
-                   | +---------+ | +--------------+  +----------------------+
-                   |             +-> NAMESPACE3.1 +--> ND3  "blk3.1" | BTT1 |
-                   |               +--------------+  +----------------------+
-                   | +---------+   +--------------+  +---------------+
-                   +-> REGION4 +---> NAMESPACE4.0 +--> ND2  "blk4.0" |
-                   | +---------+   +--------------+  +---------------+
-                   | +---------+   +--------------+  +----------------------+
-                   +-> REGION5 +---> NAMESPACE5.0 +--> ND1  "blk5.0" | BTT0 |
-                     +---------+   +--------------+  +---------------+------+
-
-
+LIBNDCTL API::
+
+              +---+
+              |CTX|    +---------+   +--------------+  +---------------+
+              +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
+                |    | +---------+   +--------------+  +---------------+
+  +-------+     |    | +---------+   +--------------+  +---------------+
+  | DIMM0 <-+   |    +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
+  +-------+ |   |    | +---------+   +--------------+  +---------------+
+  | DIMM1 <-+ +-v--+ | +---------+   +--------------+  +---------------+
+  +-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6  "blk2.0" |
+  | DIMM2 <-+ +----+ | +---------+ | +--------------+  +----------------------+
+  +-------+ |        |             +-> NAMESPACE2.1 +--> ND5  "blk2.1" | BTT2 |
+  | DIMM3 <-+        |               +--------------+  +----------------------+
+  +-------+          | +---------+   +--------------+  +---------------+
+                     +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4  "blk3.0" |
+                     | +---------+ | +--------------+  +----------------------+
+                     |             +-> NAMESPACE3.1 +--> ND3  "blk3.1" | BTT1 |
+                     |               +--------------+  +----------------------+
+                     | +---------+   +--------------+  +---------------+
+                     +-> REGION4 +---> NAMESPACE4.0 +--> ND2  "blk4.0" |
+                     | +---------+   +--------------+  +---------------+
+                     | +---------+   +--------------+  +----------------------+
+                     +-> REGION5 +---> NAMESPACE5.0 +--> ND1  "blk5.0" | BTT0 |
+                       +---------+   +--------------+  +---------------+------+
diff --git a/Documentation/nvdimm/security.txt b/Documentation/driver-api/nvdimm/security.rst
index 4c36c05ca98e..ad9dea099b34 100644
--- a/Documentation/nvdimm/security.txt
+++ b/Documentation/driver-api/nvdimm/security.rst
@@ -1,4 +1,5 @@
-NVDIMM SECURITY
+===============
+NVDIMM Security
 ===============
 
 1. Introduction
@@ -138,4 +139,5 @@ This command is only available when the master security is enabled, indicated
 by the extended security status.
 
 [1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
+
 [2]: http://www.t13.org/documents/UploadedDocuments/docs2006/e05179r4-ACS-SecurityClarifications.pdf
diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/driver-api/nvmem.rst
index fc2fe4b18655..d9d958d5c824 100644
--- a/Documentation/nvmem/nvmem.txt
+++ b/Documentation/driver-api/nvmem.rst
@@ -1,5 +1,10 @@
-			    NVMEM SUBSYSTEM
-	  Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+NVMEM Subsystem
+===============
+
+ Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 This document explains the NVMEM Framework along with the APIs provided,
 and how to use it.
@@ -40,54 +45,54 @@ nvmem_device pointer.
 
 nvmem_unregister(nvmem) is used to unregister a previously registered provider.
 
-For example, a simple qfprom case:
+For example, a simple qfprom case::
 
-static struct nvmem_config econfig = {
+  static struct nvmem_config econfig = {
 	.name = "qfprom",
 	.owner = THIS_MODULE,
-};
+  };
 
-static int qfprom_probe(struct platform_device *pdev)
-{
+  static int qfprom_probe(struct platform_device *pdev)
+  {
 	...
 	econfig.dev = &pdev->dev;
 	nvmem = nvmem_register(&econfig);
 	...
-}
+  }
 
 It is mandatory that the NVMEM provider has a regmap associated with its
 struct device. Failure to do would return error code from nvmem_register().
 
 Users of board files can define and register nvmem cells using the
-nvmem_cell_table struct:
+nvmem_cell_table struct::
 
-static struct nvmem_cell_info foo_nvmem_cells[] = {
+  static struct nvmem_cell_info foo_nvmem_cells[] = {
 	{
 		.name		= "macaddr",
 		.offset		= 0x7f00,
 		.bytes		= ETH_ALEN,
 	}
-};
+  };
 
-static struct nvmem_cell_table foo_nvmem_cell_table = {
+  static struct nvmem_cell_table foo_nvmem_cell_table = {
 	.nvmem_name		= "i2c-eeprom",
 	.cells			= foo_nvmem_cells,
 	.ncells			= ARRAY_SIZE(foo_nvmem_cells),
-};
+  };
 
-nvmem_add_cell_table(&foo_nvmem_cell_table);
+  nvmem_add_cell_table(&foo_nvmem_cell_table);
 
 Additionally it is possible to create nvmem cell lookup entries and register
-them with the nvmem framework from machine code as shown in the example below:
+them with the nvmem framework from machine code as shown in the example below::
 
-static struct nvmem_cell_lookup foo_nvmem_lookup = {
+  static struct nvmem_cell_lookup foo_nvmem_lookup = {
 	.nvmem_name		= "i2c-eeprom",
 	.cell_name		= "macaddr",
 	.dev_id			= "foo_mac.0",
 	.con_id			= "mac-address",
-};
+  };
 
-nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
+  nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
 
 NVMEM Consumers
 +++++++++++++++
@@ -99,43 +104,43 @@ read from and to NVMEM.
 =================================
 
 NVMEM cells are the data entries/fields in the NVMEM.
-The NVMEM framework provides 3 APIs to read/write NVMEM cells.
+The NVMEM framework provides 3 APIs to read/write NVMEM cells::
 
-struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
-struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
+  struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
+  struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
 
-void nvmem_cell_put(struct nvmem_cell *cell);
-void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+  void nvmem_cell_put(struct nvmem_cell *cell);
+  void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
 
-void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
-int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
+  void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
+  int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
 
-*nvmem_cell_get() apis will get a reference to nvmem cell for a given id,
+`*nvmem_cell_get()` apis will get a reference to nvmem cell for a given id,
 and nvmem_cell_read/write() can then read or write to the cell.
-Once the usage of the cell is finished the consumer should call *nvmem_cell_put()
-to free all the allocation memory for the cell.
+Once the usage of the cell is finished the consumer should call
+`*nvmem_cell_put()` to free all the allocation memory for the cell.
 
 4. Direct NVMEM device based consumer APIs
 ==========================================
 
 In some instances it is necessary to directly read/write the NVMEM.
-To facilitate such consumers NVMEM framework provides below apis.
+To facilitate such consumers NVMEM framework provides below apis::
 
-struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
-struct nvmem_device *devm_nvmem_device_get(struct device *dev,
+  struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
+  struct nvmem_device *devm_nvmem_device_get(struct device *dev,
 					   const char *name);
-void nvmem_device_put(struct nvmem_device *nvmem);
-int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
+  void nvmem_device_put(struct nvmem_device *nvmem);
+  int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
 		      size_t bytes, void *buf);
-int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
+  int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
 		       size_t bytes, void *buf);
-int nvmem_device_cell_read(struct nvmem_device *nvmem,
+  int nvmem_device_cell_read(struct nvmem_device *nvmem,
 			   struct nvmem_cell_info *info, void *buf);
-int nvmem_device_cell_write(struct nvmem_device *nvmem,
+  int nvmem_device_cell_write(struct nvmem_device *nvmem,
 			    struct nvmem_cell_info *info, void *buf);
 
 Before the consumers can read/write NVMEM directly, it should get hold
-of nvmem_controller from one of the *nvmem_device_get() api.
+of nvmem_controller from one of the `*nvmem_device_get()` api.
 
 The difference between these apis and cell based apis is that these apis always
 take nvmem_device as parameter.
@@ -145,12 +150,12 @@ take nvmem_device as parameter.
 
 When a consumer no longer needs the NVMEM, it has to release the reference
 to the NVMEM it has obtained using the APIs mentioned in the above section.
-The NVMEM framework provides 2 APIs to release a reference to the NVMEM.
+The NVMEM framework provides 2 APIs to release a reference to the NVMEM::
 
-void nvmem_cell_put(struct nvmem_cell *cell);
-void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
-void nvmem_device_put(struct nvmem_device *nvmem);
-void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
+  void nvmem_cell_put(struct nvmem_cell *cell);
+  void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+  void nvmem_device_put(struct nvmem_device *nvmem);
+  void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
 
 Both these APIs are used to release a reference to the NVMEM and
 devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated
@@ -162,20 +167,21 @@ Userspace
 6. Userspace binary interface
 ==============================
 
-Userspace can read/write the raw NVMEM file located at
-/sys/bus/nvmem/devices/*/nvmem
+Userspace can read/write the raw NVMEM file located at::
+
+	/sys/bus/nvmem/devices/*/nvmem
 
-ex:
+ex::
 
-hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+  hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
 
-0000000 0000 0000 0000 0000 0000 0000 0000 0000
-*
-00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
-0000000 0000 0000 0000 0000 0000 0000 0000 0000
-...
-*
-0001000
+  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+  *
+  00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+  ...
+  *
+  0001000
 
 7. DeviceTree Binding
 =====================
diff --git a/Documentation/parport-lowlevel.txt b/Documentation/driver-api/parport-lowlevel.rst
index 0633d70ffda7..0633d70ffda7 100644
--- a/Documentation/parport-lowlevel.txt
+++ b/Documentation/driver-api/parport-lowlevel.rst
diff --git a/Documentation/driver-api/phy/index.rst b/Documentation/driver-api/phy/index.rst
new file mode 100644
index 000000000000..69ba1216de72
--- /dev/null
+++ b/Documentation/driver-api/phy/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Generic PHY Framework
+=====================
+
+.. toctree::
+
+   phy
+   samsung-usb2
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
+
diff --git a/Documentation/phy.txt b/Documentation/driver-api/phy/phy.rst
index 457c3e0f86d6..457c3e0f86d6 100644
--- a/Documentation/phy.txt
+++ b/Documentation/driver-api/phy/phy.rst
diff --git a/Documentation/phy/samsung-usb2.txt b/Documentation/driver-api/phy/samsung-usb2.rst
index ed12d437189d..c48c8b9797b9 100644
--- a/Documentation/phy/samsung-usb2.txt
+++ b/Documentation/driver-api/phy/samsung-usb2.rst
@@ -1,9 +1,9 @@
-.------------------------------------------------------------------------------+
-|			Samsung USB 2.0 PHY adaptation layer		       |
-+-----------------------------------------------------------------------------+'
+====================================
+Samsung USB 2.0 PHY adaptation layer
+====================================
 
-| 1. Description
-+----------------
+1. Description
+--------------
 
 The architecture of the USB 2.0 PHY module in Samsung SoCs is similar
 among many SoCs. In spite of the similarities it proved difficult to
@@ -14,8 +14,8 @@ the PHY powering up process had to be altered. This adaptation layer is
 a compromise between having separate drivers and having a single driver
 with added support for many special cases.
 
-| 2. Files description
-+----------------------
+2. Files description
+--------------------
 
 - phy-samsung-usb2.c
    This is the main file of the adaptation layer. This file contains
@@ -32,44 +32,45 @@ with added support for many special cases.
    driver. In addition it should contain extern declarations for
    structures that describe particular SoCs.
 
-| 3. Supporting SoCs
-+--------------------
+3. Supporting SoCs
+------------------
 
 To support a new SoC a new file should be added to the drivers/phy
 directory. Each SoC's configuration is stored in an instance of the
-struct samsung_usb2_phy_config.
+struct samsung_usb2_phy_config::
 
-struct samsung_usb2_phy_config {
+  struct samsung_usb2_phy_config {
 	const struct samsung_usb2_common_phy *phys;
 	int (*rate_to_clk)(unsigned long, u32 *);
 	unsigned int num_phys;
 	bool has_mode_switch;
-};
+  };
 
-The num_phys is the number of phys handled by the driver. *phys is an
+The num_phys is the number of phys handled by the driver. `*phys` is an
 array that contains the configuration for each phy. The has_mode_switch
 property is a boolean flag that determines whether the SoC has USB host
 and device on a single pair of pins. If so, a special register has to
 be modified to change the internal routing of these pins between a USB
 device or host module.
 
-For example the configuration for Exynos 4210 is following:
+For example the configuration for Exynos 4210 is following::
 
-const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
+  const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
 	.has_mode_switch        = 0,
 	.num_phys		= EXYNOS4210_NUM_PHYS,
 	.phys			= exynos4210_phys,
 	.rate_to_clk		= exynos4210_rate_to_clk,
-}
+  }
+
+- `int (*rate_to_clk)(unsigned long, u32 *)`
 
-- int (*rate_to_clk)(unsigned long, u32 *)
 	The rate_to_clk callback is to convert the rate of the clock
 	used as the reference clock for the PHY module to the value
 	that should be written in the hardware register.
 
-The exynos4210_phys configuration array is as follows:
+The exynos4210_phys configuration array is as follows::
 
-static const struct samsung_usb2_common_phy exynos4210_phys[] = {
+  static const struct samsung_usb2_common_phy exynos4210_phys[] = {
 	{
 		.label		= "device",
 		.id		= EXYNOS4210_DEVICE,
@@ -95,29 +96,30 @@ static const struct samsung_usb2_common_phy exynos4210_phys[] = {
 		.power_off	= exynos4210_power_off,
 	},
 	{},
-};
+  };
+
+- `int (*power_on)(struct samsung_usb2_phy_instance *);`
+  `int (*power_off)(struct samsung_usb2_phy_instance *);`
 
-- int (*power_on)(struct samsung_usb2_phy_instance *);
-- int (*power_off)(struct samsung_usb2_phy_instance *);
 	These two callbacks are used to power on and power off the phy
 	by modifying appropriate registers.
 
 Final change to the driver is adding appropriate compatible value to the
 phy-samsung-usb2.c file. In case of Exynos 4210 the following lines were
-added to the struct of_device_id samsung_usb2_phy_of_match[] array:
+added to the struct of_device_id samsung_usb2_phy_of_match[] array::
 
-#ifdef CONFIG_PHY_EXYNOS4210_USB2
+  #ifdef CONFIG_PHY_EXYNOS4210_USB2
 	{
 		.compatible = "samsung,exynos4210-usb2-phy",
 		.data = &exynos4210_usb2_phy_config,
 	},
-#endif
+  #endif
 
 To add further flexibility to the driver the Kconfig file enables to
 include support for selected SoCs in the compiled driver. The Kconfig
-entry for Exynos 4210 is following:
+entry for Exynos 4210 is following::
 
-config PHY_EXYNOS4210_USB2
+  config PHY_EXYNOS4210_USB2
 	bool "Support for Exynos 4210"
 	depends on PHY_SAMSUNG_USB2
 	depends on CPU_EXYNOS4210
@@ -128,8 +130,8 @@ config PHY_EXYNOS4210_USB2
 	  phys are available - device, host, HSCI0 and HSCI1.
 
 The newly created file that supports the new SoC has to be also added to the
-Makefile. In case of Exynos 4210 the added line is following:
+Makefile. In case of Exynos 4210 the added line is following::
 
-obj-$(CONFIG_PHY_EXYNOS4210_USB2)       += phy-exynos4210-usb2.o
+  obj-$(CONFIG_PHY_EXYNOS4210_USB2)       += phy-exynos4210-usb2.o
 
 After completing these steps the support for the new SoC should be ready.
diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
index 1456d2c32ebd..2d6b99766ee8 100644
--- a/Documentation/driver-api/pps.rst
+++ b/Documentation/driver-api/pps.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ======================
 PPS - Pulse Per Second
diff --git a/Documentation/driver-api/pti_intel_mid.rst b/Documentation/driver-api/pti_intel_mid.rst
new file mode 100644
index 000000000000..20f1cff42d5f
--- /dev/null
+++ b/Documentation/driver-api/pti_intel_mid.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Intel MID PTI
+=============
+
+The Intel MID PTI project is HW implemented in Intel Atom
+system-on-a-chip designs based on the Parallel Trace
+Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
+for this platform involves the following files::
+
+	./include/linux/pti.h
+	./drivers/.../n_tracesink.h
+	./drivers/.../n_tracerouter.c
+	./drivers/.../n_tracesink.c
+	./drivers/.../pti.c
+
+pti.c is the driver that enables various debugging features
+popular on platforms from certain mobile manufacturers.
+n_tracerouter.c and n_tracesink.c allow extra system information to
+be collected and routed to the pti driver, such as trace
+debugging data from a modem.  Although n_tracerouter
+and n_tracesink are a part of the complete PTI solution,
+these two line disciplines can work separately from
+pti.c and route any data stream from one /dev/tty node
+to another /dev/tty node via kernel-space.  This provides
+a stable, reliable connection that will not break unless
+the user-space application shuts down (plus avoids
+kernel->user->kernel context switch overheads of routing
+data).
+
+An example debugging usage for this driver system:
+
+  * Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
+    a console device to further capture debugging messages to PTI.
+  * Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
+    This is where n_tracerouter and n_tracesink are used.
+  * Hook /dev/pti to a user-level debugging application for writing
+    to PTI HW.
+  * `Use mipi_` Kernel Driver API in other device drivers for
+    debugging to PTI by first requesting a PTI write address via
+    mipi_request_masterchannel(1).
+
+Below is example pseudo-code on how a 'privileged' application
+can hook up n_tracerouter and n_tracesink to any tty on
+a system.  'Privileged' means the application has enough
+privileges to successfully manipulate the ldisc drivers
+but is not just blindly executing as 'root'. Keep in mind
+the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
+and n_tracesink line discpline drivers but is a generic
+operation for a program to use a line discpline driver
+on a tty port other than the default n_tty::
+
+  /////////// To hook up n_tracerouter and n_tracesink /////////
+
+  // Note that n_tracerouter depends on n_tracesink.
+  #include <errno.h>
+  #define ONE_TTY "/dev/ttyOne"
+  #define TWO_TTY "/dev/ttyTwo"
+
+  // needed global to hand onto ldisc connection
+  static int g_fd_source = -1;
+  static int g_fd_sink  = -1;
+
+  // these two vars used to grab LDISC values from loaded ldisc drivers
+  // in OS.  Look at /proc/tty/ldiscs to get the right numbers from
+  // the ldiscs loaded in the system.
+  int source_ldisc_num, sink_ldisc_num = -1;
+  int retval;
+
+  g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
+  g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
+
+  if (g_fd_source <= 0) || (g_fd_sink <= 0) {
+     // doubt you'll want to use these exact error lines of code
+     printf("Error on open(). errno: %d\n",errno);
+     return errno;
+  }
+
+  retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
+  if (retval < 0) {
+     printf("Error on ioctl().  errno: %d\n", errno);
+     return errno;
+  }
+
+  retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
+  if (retval < 0) {
+     printf("Error on ioctl().  errno: %d\n", errno);
+     return errno;
+  }
+
+  /////////// To disconnect n_tracerouter and n_tracesink ////////
+
+  // First make sure data through the ldiscs has stopped.
+
+  // Second, disconnect ldiscs.  This provides a
+  // little cleaner shutdown on tty stack.
+  sink_ldisc_num = 0;
+  source_ldisc_num = 0;
+  ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
+  ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
+
+  // Three, program closes connection, and cleanup:
+  close(g_fd_uart);
+  close(g_fd_gadget);
+  g_fd_uart = g_fd_gadget = NULL;
diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst
index b6e65d66d37a..a15192e32347 100644
--- a/Documentation/driver-api/ptp.rst
+++ b/Documentation/driver-api/ptp.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ===========================================
 PTP hardware clock infrastructure for Linux
diff --git a/Documentation/pwm.txt b/Documentation/driver-api/pwm.rst
index ab62f1bb0366..ab62f1bb0366 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/driver-api/pwm.rst
diff --git a/Documentation/driver-api/rapidio/index.rst b/Documentation/driver-api/rapidio/index.rst
new file mode 100644
index 000000000000..a41b4242d16f
--- /dev/null
+++ b/Documentation/driver-api/rapidio/index.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+The Linux RapidIO Subsystem
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   rapidio
+   sysfs
+
+   tsi721
+   mport_cdev
+   rio_cm
diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/driver-api/rapidio/mport_cdev.rst
index a53f786ee2e9..df77a7f7be7d 100644
--- a/Documentation/rapidio/mport_cdev.txt
+++ b/Documentation/driver-api/rapidio/mport_cdev.rst
@@ -1,13 +1,9 @@
-RapidIO subsystem mport character device driver (rio_mport_cdev.c)
 ==================================================================
-
-Version History:
-----------------
-  1.0.0 - Initial driver release.
-
+RapidIO subsystem mport character device driver (rio_mport_cdev.c)
 ==================================================================
 
-I. Overview
+1. Overview
+===========
 
 This device driver is the result of collaboration within the RapidIO.org
 Software Task Group (STG) between Texas Instruments, Freescale,
@@ -29,40 +25,41 @@ Using available set of ioctl commands user-space applications can perform
 following RapidIO bus and subsystem operations:
 
 - Reads and writes from/to configuration registers of mport devices
-    (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL)
+  (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL)
 - Reads and writes from/to configuration registers of remote RapidIO devices.
   This operations are defined as RapidIO Maintenance reads/writes in RIO spec.
-    (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE)
+  (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE)
 - Set RapidIO Destination ID for mport devices (RIO_MPORT_MAINT_HDID_SET)
 - Set RapidIO Component Tag for mport devices (RIO_MPORT_MAINT_COMPTAG_SET)
 - Query logical index of mport devices (RIO_MPORT_MAINT_PORT_IDX_GET)
 - Query capabilities and RapidIO link configuration of mport devices
-    (RIO_MPORT_GET_PROPERTIES)
+  (RIO_MPORT_GET_PROPERTIES)
 - Enable/Disable reporting of RapidIO doorbell events to user-space applications
-    (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE)
+  (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE)
 - Enable/Disable reporting of RIO port-write events to user-space applications
-    (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE)
+  (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE)
 - Query/Control type of events reported through this driver: doorbells,
   port-writes or both (RIO_SET_EVENT_MASK/RIO_GET_EVENT_MASK)
 - Configure/Map mport's outbound requests window(s) for specific size,
   RapidIO destination ID, hopcount and request type
-    (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND)
+  (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND)
 - Configure/Map mport's inbound requests window(s) for specific size,
   RapidIO base address and local memory base address
-    (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND)
+  (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND)
 - Allocate/Free contiguous DMA coherent memory buffer for DMA data transfers
   to/from remote RapidIO devices (RIO_ALLOC_DMA/RIO_FREE_DMA)
 - Initiate DMA data transfers to/from remote RapidIO devices (RIO_TRANSFER).
   Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data
   transfer modes.
 - Check/Wait for completion of asynchronous DMA data transfer
-    (RIO_WAIT_FOR_ASYNC)
+  (RIO_WAIT_FOR_ASYNC)
 - Manage device objects supported by RapidIO subsystem (RIO_DEV_ADD/RIO_DEV_DEL).
   This allows implementation of various RapidIO fabric enumeration algorithms
   as user-space applications while using remaining functionality provided by
   kernel RapidIO subsystem.
 
-II. Hardware Compatibility
+2. Hardware Compatibility
+=========================
 
 This device driver uses standard interfaces defined by kernel RapidIO subsystem
 and therefore it can be used with any mport device driver registered by RapidIO
@@ -78,29 +75,35 @@ functionality of their platform when planning to use this driver:
   specific DMA engine support and therefore DMA data transfers mport_cdev driver
   are not available.
 
-III. Module parameters
+3. Module parameters
+====================
 
-- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+- 'dma_timeout'
+      - DMA transfer completion timeout (in msec, default value 3000).
         This parameter set a maximum completion wait time for SYNC mode DMA
         transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
 
-- 'dbg_level' - This parameter allows to control amount of debug information
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.
         For mask definitions see 'drivers/rapidio/devices/rio_mport_cdev.c'
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-IV. Known problems
+4. Known problems
+=================
 
   None.
 
-V. User-space Applications and API
+5. User-space Applications and API
+==================================
 
 API library and applications that use this device driver are available from
 RapidIO.org.
 
-VI. TODO List
+6. TODO List
+============
 
 - Add support for sending/receiving "raw" RapidIO messaging packets.
 - Add memory mapped DMA data transfers as an option when RapidIO-specific DMA
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/driver-api/rapidio/rapidio.rst
index 28fbd877f85a..fb8942d3ba85 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/driver-api/rapidio/rapidio.rst
@@ -1,6 +1,6 @@
-                          The Linux RapidIO Subsystem
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+============
+Introduction
+============
 
 The RapidIO standard is a packet-based fabric interconnect standard designed for
 use in embedded systems. Development of the RapidIO standard is directed by the
@@ -11,7 +11,7 @@ This document describes the basics of the Linux RapidIO subsystem and provides
 information on its major components.
 
 1 Overview
-----------
+==========
 
 Because the RapidIO subsystem follows the Linux device model it is integrated
 into the kernel similarly to other buses by defining RapidIO-specific device and
@@ -22,7 +22,7 @@ architecture-specific interfaces that provide support for common RapidIO
 subsystem operations.
 
 2. Core Components
-------------------
+==================
 
 A typical RapidIO network is a combination of endpoints and switches.
 Each of these components is represented in the subsystem by an associated data
@@ -30,6 +30,7 @@ structure. The core logical components of the RapidIO subsystem are defined
 in include/linux/rio.h file.
 
 2.1 Master Port
+---------------
 
 A master port (or mport) is a RapidIO interface controller that is local to the
 processor executing the Linux code. A master port generates and receives RapidIO
@@ -46,6 +47,7 @@ includes rio_ops data structure which contains pointers to hardware specific
 implementations of RapidIO functions.
 
 2.2 Device
+----------
 
 A RapidIO device is any endpoint (other than mport) or switch in the network.
 All devices are presented in the RapidIO subsystem by corresponding rio_dev data
@@ -53,6 +55,7 @@ structure. Devices form one global device list and per-network device lists
 (depending on number of available mports and networks).
 
 2.3 Switch
+----------
 
 A RapidIO switch is a special class of device that routes packets between its
 ports towards their final destination. The packet destination port within a
@@ -66,6 +69,7 @@ specific switch drivers that are designed to provide hardware-specific
 implementation of common switch management routines.
 
 2.4 Network
+-----------
 
 A RapidIO network is a combination of interconnected endpoint and switch devices.
 Each RapidIO network known to the system is represented by corresponding rio_net
@@ -74,11 +78,13 @@ ports that form the same network. It also contains a pointer to the default
 master port that is used to communicate with devices within the network.
 
 2.5 Device Drivers
+------------------
 
 RapidIO device-specific drivers follow Linux Kernel Driver Model and are
 intended to support specific RapidIO devices attached to the RapidIO network.
 
 2.6 Subsystem Interfaces
+------------------------
 
 RapidIO interconnect specification defines features that may be used to provide
 one or more common service layers for all participating RapidIO devices. These
@@ -90,7 +96,7 @@ subsystem interfaces. This allows to have multiple common services attached to
 the same device without blocking attachment of a device-specific driver.
 
 3. Subsystem Initialization
----------------------------
+===========================
 
 In order to initialize the RapidIO subsystem, a platform must initialize and
 register at least one master port within the RapidIO network. To register mport
@@ -105,7 +111,7 @@ RapidIO subsystem can be configured to be built as a statically linked or
 modular component of the kernel (see details below).
 
 4. Enumeration and Discovery
-----------------------------
+============================
 
 4.1 Overview
 ------------
@@ -168,14 +174,16 @@ on RapidIO subsystem build configuration:
   (b) If the RapidIO subsystem core is built as a loadable module, in addition
   to the method shown above, the host destination ID(s) can be specified using
   traditional methods of passing module parameter "hdid=" during its loading:
+
   - from command line: "modprobe rapidio hdid=-1,7", or
   - from modprobe configuration file using configuration command "options",
     like in this example: "options rapidio hdid=-1,7". An example of modprobe
     configuration file is provided in the section below.
 
-  NOTES:
+NOTES:
   (i) if "hdid=" parameter is omitted all available mport will be assigned
   destination ID = -1;
+
   (ii) the "hdid=" parameter in systems with multiple mports can have
   destination ID assignments omitted from the end of list (default = -1).
 
@@ -317,8 +325,7 @@ must ensure that they are loaded before the enumeration/discovery starts.
 This process can be automated by specifying pre- or post- dependencies in the
 RapidIO-specific modprobe configuration file as shown in the example below.
 
-  File /etc/modprobe.d/rapidio.conf:
-  ----------------------------------
+File /etc/modprobe.d/rapidio.conf::
 
   # Configure RapidIO subsystem modules
 
@@ -335,17 +342,21 @@ RapidIO-specific modprobe configuration file as shown in the example below.
 
   --------------------------
 
-NOTE: In the example above, one of "softdep" commands must be removed or
-commented out to keep required module loading sequence.
+NOTE:
+  In the example above, one of "softdep" commands must be removed or
+  commented out to keep required module loading sequence.
 
-A. References
--------------
+5. References
+=============
 
 [1] RapidIO Trade Association. RapidIO Interconnect Specifications.
     http://www.rapidio.org.
+
 [2] Rapidio TA. Technology Comparisons.
     http://www.rapidio.org/education/technology_comparisons/
+
 [3] RapidIO support for Linux.
     http://lwn.net/Articles/139118/
+
 [4] Matt Porter. RapidIO for Linux. Ottawa Linux Symposium, 2005
     http://www.kernel.org/doc/ols/2005/ols2005v2-pages-43-56.pdf
diff --git a/Documentation/rapidio/rio_cm.txt b/Documentation/driver-api/rapidio/rio_cm.rst
index 27aa401f1126..5294430a7a74 100644
--- a/Documentation/rapidio/rio_cm.txt
+++ b/Documentation/driver-api/rapidio/rio_cm.rst
@@ -1,13 +1,10 @@
+==========================================================================
 RapidIO subsystem Channelized Messaging character device driver (rio_cm.c)
 ==========================================================================
 
-Version History:
-----------------
-  1.0.0 - Initial driver release.
-
-==========================================================================
 
-I. Overview
+1. Overview
+===========
 
 This device driver is the result of collaboration within the RapidIO.org
 Software Task Group (STG) between Texas Instruments, Prodrive Technologies,
@@ -41,79 +38,98 @@ in /dev directory common for all registered RapidIO mport devices.
 
 Following ioctl commands are available to user-space applications:
 
-- RIO_CM_MPORT_GET_LIST : Returns to caller list of local mport devices that
+- RIO_CM_MPORT_GET_LIST:
+    Returns to caller list of local mport devices that
     support messaging operations (number of entries up to RIO_MAX_MPORTS).
     Each list entry is combination of mport's index in the system and RapidIO
     destination ID assigned to the port.
-- RIO_CM_EP_GET_LIST_SIZE : Returns number of messaging capable remote endpoints
+- RIO_CM_EP_GET_LIST_SIZE:
+    Returns number of messaging capable remote endpoints
     in a RapidIO network associated with the specified mport device.
-- RIO_CM_EP_GET_LIST : Returns list of RapidIO destination IDs for messaging
+- RIO_CM_EP_GET_LIST:
+    Returns list of RapidIO destination IDs for messaging
     capable remote endpoints (peers) available in a RapidIO network associated
     with the specified mport device.
-- RIO_CM_CHAN_CREATE : Creates RapidIO message exchange channel data structure
+- RIO_CM_CHAN_CREATE:
+    Creates RapidIO message exchange channel data structure
     with channel ID assigned automatically or as requested by a caller.
-- RIO_CM_CHAN_BIND : Binds the specified channel data structure to the specified
+- RIO_CM_CHAN_BIND:
+    Binds the specified channel data structure to the specified
     mport device.
-- RIO_CM_CHAN_LISTEN : Enables listening for connection requests on the specified
+- RIO_CM_CHAN_LISTEN:
+    Enables listening for connection requests on the specified
     channel.
-- RIO_CM_CHAN_ACCEPT : Accepts a connection request from peer on the specified
+- RIO_CM_CHAN_ACCEPT:
+    Accepts a connection request from peer on the specified
     channel. If wait timeout for this request is specified by a caller it is
     a blocking call. If timeout set to 0 this is non-blocking call - ioctl
     handler checks for a pending connection request and if one is not available
     exits with -EGAIN error status immediately.
-- RIO_CM_CHAN_CONNECT : Sends a connection request to a remote peer/channel.
-- RIO_CM_CHAN_SEND : Sends a data message through the specified channel.
+- RIO_CM_CHAN_CONNECT:
+    Sends a connection request to a remote peer/channel.
+- RIO_CM_CHAN_SEND:
+    Sends a data message through the specified channel.
     The handler for this request assumes that message buffer specified by
     a caller includes the reserved space for a packet header required by
     this driver.
-- RIO_CM_CHAN_RECEIVE : Receives a data message through a connected channel.
+- RIO_CM_CHAN_RECEIVE:
+    Receives a data message through a connected channel.
     If the channel does not have an incoming message ready to return this ioctl
     handler will wait for new message until timeout specified by a caller
     expires. If timeout value is set to 0, ioctl handler uses a default value
     defined by MAX_SCHEDULE_TIMEOUT.
-- RIO_CM_CHAN_CLOSE : Closes a specified channel and frees associated buffers.
+- RIO_CM_CHAN_CLOSE:
+    Closes a specified channel and frees associated buffers.
     If the specified channel is in the CONNECTED state, sends close notification
     to the remote peer.
 
 The ioctl command codes and corresponding data structures intended for use by
 user-space applications are defined in 'include/uapi/linux/rio_cm_cdev.h'.
 
-II. Hardware Compatibility
+2. Hardware Compatibility
+=========================
 
 This device driver uses standard interfaces defined by kernel RapidIO subsystem
 and therefore it can be used with any mport device driver registered by RapidIO
 subsystem with limitations set by available mport HW implementation of messaging
 mailboxes.
 
-III. Module parameters
+3. Module parameters
+====================
 
-- 'dbg_level' - This parameter allows to control amount of debug information
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional block.
         For mask definitions see 'drivers/rapidio/devices/rio_cm.c'
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-- 'cmbox' - Number of RapidIO mailbox to use (default value is 1).
+- 'cmbox'
+      - Number of RapidIO mailbox to use (default value is 1).
         This parameter allows to set messaging mailbox number that will be used
         within entire RapidIO network. It can be used when default mailbox is
         used by other device drivers or is not supported by some nodes in the
         RapidIO network.
 
-- 'chstart' - Start channel number for dynamic assignment. Default value - 256.
+- 'chstart'
+      - Start channel number for dynamic assignment. Default value - 256.
         Allows to exclude channel numbers below this parameter from dynamic
         allocation to avoid conflicts with software components that use
         reserved predefined channel numbers.
 
-IV. Known problems
+4. Known problems
+=================
 
   None.
 
-V. User-space Applications and API Library
+5. User-space Applications and API Library
+==========================================
 
 Messaging API library and applications that use this device driver are available
 from RapidIO.org.
 
-VI. TODO List
+6. TODO List
+============
 
 - Add support for system notification messages (reserved channel 0).
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/driver-api/rapidio/sysfs.rst
index a1adac888e6e..540f72683496 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/driver-api/rapidio/sysfs.rst
@@ -1,3 +1,7 @@
+=============
+Sysfs entries
+=============
+
 The RapidIO sysfs files have moved to:
 Documentation/ABI/testing/sysfs-bus-rapidio and
 Documentation/ABI/testing/sysfs-class-rapidio
diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/driver-api/rapidio/tsi721.rst
index cd2a2935d51d..42aea438cd20 100644
--- a/Documentation/rapidio/tsi721.txt
+++ b/Documentation/driver-api/rapidio/tsi721.rst
@@ -1,7 +1,9 @@
+=========================================================================
 RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
 =========================================================================
 
-I. Overview
+1. Overview
+===========
 
 This driver implements all currently defined RapidIO mport callback functions.
 It supports maintenance read and write operations, inbound and outbound RapidIO
@@ -17,7 +19,9 @@ into the corresponding message queue. Messaging callbacks are implemented to be
 fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
 
 1. Module parameters:
-- 'dbg_level' - This parameter allows to control amount of debug information
+
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         This parameter can be changed bit masks that correspond to the specific
         functional block.
@@ -25,37 +29,44 @@ fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-- 'dma_desc_per_channel' - This parameter defines number of hardware buffer
+- 'dma_desc_per_channel'
+      - This parameter defines number of hardware buffer
         descriptors allocated for each registered Tsi721 DMA channel.
         Its default value is 128.
 
-- 'dma_txqueue_sz' - DMA transactions queue size. Defines number of pending
+- 'dma_txqueue_sz'
+      - DMA transactions queue size. Defines number of pending
         transaction requests that can be accepted by each DMA channel.
         Default value is 16.
 
-- 'dma_sel' - DMA channel selection mask. Bitmask that defines which hardware
+- 'dma_sel'
+      - DMA channel selection mask. Bitmask that defines which hardware
         DMA channels (0 ... 6) will be registered with DmaEngine core.
         If bit is set to 1, the corresponding DMA channel will be registered.
         DMA channels not selected by this mask will not be used by this device
         driver. Default value is 0x7f (use all channels).
 
-- 'pcie_mrrs' - override value for PCIe Maximum Read Request Size (MRRS).
+- 'pcie_mrrs'
+      - override value for PCIe Maximum Read Request Size (MRRS).
         This parameter gives an ability to override MRRS value set during PCIe
         configuration process. Tsi721 supports read request sizes up to 4096B.
         Value for this parameter must be set as defined by PCIe specification:
         0 = 128B, 1 = 256B, 2 = 512B, 3 = 1024B, 4 = 2048B and 5 = 4096B.
         Default value is '-1' (= keep platform setting).
 
-- 'mbox_sel' - RIO messaging MBOX selection mask. This is a bitmask that defines
+- 'mbox_sel'
+      - RIO messaging MBOX selection mask. This is a bitmask that defines
         messaging MBOXes are managed by this device driver. Mask bits 0 - 3
         correspond to MBOX0 - MBOX3. MBOX is under driver's control if the
         corresponding bit is set to '1'. Default value is 0x0f (= all).
 
-II. Known problems
+2. Known problems
+=================
 
   None.
 
-III. DMA Engine Support
+3. DMA Engine Support
+=====================
 
 Tsi721 mport driver supports DMA data transfers between local system memory and
 remote RapidIO devices. This functionality is implemented according to SLAVE
@@ -68,17 +79,21 @@ One BDMA channel is reserved for generation of maintenance read/write requests.
 
 If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included,
 this driver will accept DMA-specific module parameter:
-  "dma_desc_per_channel" - defines number of hardware buffer descriptors used by
+
+  "dma_desc_per_channel"
+			 - defines number of hardware buffer descriptors used by
                            each BDMA channel of Tsi721 (by default - 128).
 
-IV. Version History
+4. Version History
 
-  1.1.0 - DMA operations re-worked to support data scatter/gather lists larger
+  =====   ====================================================================
+  1.1.0   DMA operations re-worked to support data scatter/gather lists larger
           than hardware buffer descriptors ring.
-  1.0.0 - Initial driver release.
+  1.0.0   Initial driver release.
+  =====   ====================================================================
 
-V.  License
------------------------------------------------
+5.  License
+===========
 
   Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
 
diff --git a/Documentation/rfkill.txt b/Documentation/driver-api/rfkill.rst
index 7d3684e81df6..7d3684e81df6 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/driver-api/rfkill.rst
diff --git a/Documentation/serial/cyclades_z.rst b/Documentation/driver-api/serial/cyclades_z.rst
index 532ff67e2f1c..532ff67e2f1c 100644
--- a/Documentation/serial/cyclades_z.rst
+++ b/Documentation/driver-api/serial/cyclades_z.rst
diff --git a/Documentation/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
index 4537119bf624..31bd4e16fb1f 100644
--- a/Documentation/serial/driver.rst
+++ b/Documentation/driver-api/serial/driver.rst
@@ -311,7 +311,7 @@ hardware.
 	This call must not sleep
 
   set_ldisc(port,termios)
-	Notifier for discipline change. See Documentation/serial/tty.rst.
+	Notifier for discipline change. See Documentation/driver-api/serial/tty.rst.
 
 	Locking: caller holds tty_port->mutex
 
diff --git a/Documentation/serial/index.rst b/Documentation/driver-api/serial/index.rst
index d0ba22ea23bf..33ad10d05b26 100644
--- a/Documentation/serial/index.rst
+++ b/Documentation/driver-api/serial/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ==========================
 Support for Serial devices
diff --git a/Documentation/serial/moxa-smartio.rst b/Documentation/driver-api/serial/moxa-smartio.rst
index 156100f17c3f..156100f17c3f 100644
--- a/Documentation/serial/moxa-smartio.rst
+++ b/Documentation/driver-api/serial/moxa-smartio.rst
diff --git a/Documentation/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst
index f3ad9fd26408..f3ad9fd26408 100644
--- a/Documentation/serial/n_gsm.rst
+++ b/Documentation/driver-api/serial/n_gsm.rst
diff --git a/Documentation/serial/rocket.rst b/Documentation/driver-api/serial/rocket.rst
index 23761eae4282..23761eae4282 100644
--- a/Documentation/serial/rocket.rst
+++ b/Documentation/driver-api/serial/rocket.rst
diff --git a/Documentation/serial/serial-iso7816.rst b/Documentation/driver-api/serial/serial-iso7816.rst
index d990143de0c6..d990143de0c6 100644
--- a/Documentation/serial/serial-iso7816.rst
+++ b/Documentation/driver-api/serial/serial-iso7816.rst
diff --git a/Documentation/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
index 6bc824f948f9..6bc824f948f9 100644
--- a/Documentation/serial/serial-rs485.rst
+++ b/Documentation/driver-api/serial/serial-rs485.rst
diff --git a/Documentation/serial/tty.rst b/Documentation/driver-api/serial/tty.rst
index dd972caacf3e..dd972caacf3e 100644
--- a/Documentation/serial/tty.rst
+++ b/Documentation/driver-api/serial/tty.rst
diff --git a/Documentation/sgi-ioc4.txt b/Documentation/driver-api/sgi-ioc4.rst
index 72709222d3c0..72709222d3c0 100644
--- a/Documentation/sgi-ioc4.txt
+++ b/Documentation/driver-api/sgi-ioc4.rst
diff --git a/Documentation/SM501.txt b/Documentation/driver-api/sm501.rst
index 882507453ba4..882507453ba4 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/driver-api/sm501.rst
diff --git a/Documentation/smsc_ece1099.txt b/Documentation/driver-api/smsc_ece1099.rst
index 079277421eaf..079277421eaf 100644
--- a/Documentation/smsc_ece1099.txt
+++ b/Documentation/driver-api/smsc_ece1099.rst
diff --git a/Documentation/switchtec.txt b/Documentation/driver-api/switchtec.rst
index 30d6a64e53f7..7611fdc53e19 100644
--- a/Documentation/switchtec.txt
+++ b/Documentation/driver-api/switchtec.rst
@@ -97,6 +97,6 @@ the following configuration settings:
 NT EP BAR 2 will be dynamically configured as a Direct Window, and
 the configuration file does not need to configure it explicitly.
 
-Please refer to Documentation/ntb.txt in Linux source tree for an overall
+Please refer to Documentation/driver-api/ntb.rst in Linux source tree for an overall
 understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB
 Hardware Driver in this stack.
diff --git a/Documentation/sync_file.txt b/Documentation/driver-api/sync_file.rst
index 496fb2c3b3e6..496fb2c3b3e6 100644
--- a/Documentation/sync_file.txt
+++ b/Documentation/driver-api/sync_file.rst
diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/driver-api/vfio-mediated-device.rst
index c3f69bcaf96e..25eb7d5b834b 100644
--- a/Documentation/vfio-mediated-device.txt
+++ b/Documentation/driver-api/vfio-mediated-device.rst
@@ -408,7 +408,7 @@ card.
 References
 ==========
 
-1. See Documentation/vfio.txt for more information on VFIO.
+1. See Documentation/driver-api/vfio.rst for more information on VFIO.
 2. struct mdev_driver in include/linux/mdev.h
 3. struct mdev_parent_ops in include/linux/mdev.h
 4. struct vfio_iommu_driver_ops in include/linux/vfio.h
diff --git a/Documentation/vfio.txt b/Documentation/driver-api/vfio.rst
index f1a4d3c3ba0b..f1a4d3c3ba0b 100644
--- a/Documentation/vfio.txt
+++ b/Documentation/driver-api/vfio.rst
diff --git a/Documentation/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..9dcbc6f18d75 100644
--- a/Documentation/xilinx/eemi.rst
+++ b/Documentation/driver-api/xilinx/eemi.rst
diff --git a/Documentation/xilinx/index.rst b/Documentation/driver-api/xilinx/index.rst
index 01cc1a0714df..13f7589ed442 100644
--- a/Documentation/xilinx/index.rst
+++ b/Documentation/driver-api/xilinx/index.rst
@@ -1,4 +1,3 @@
-:orphan:
 
 ===========
 Xilinx FPGA
diff --git a/Documentation/xillybus.txt b/Documentation/driver-api/xillybus.rst
index 2446ee303c09..2446ee303c09 100644
--- a/Documentation/xillybus.txt
+++ b/Documentation/driver-api/xillybus.rst
diff --git a/Documentation/zorro.txt b/Documentation/driver-api/zorro.rst
index 664072b017e3..664072b017e3 100644
--- a/Documentation/zorro.txt
+++ b/Documentation/driver-api/zorro.rst
diff --git a/Documentation/fault-injection/index.rst b/Documentation/fault-injection/index.rst
index 92b5639ed07a..8408a8a91b34 100644
--- a/Documentation/fault-injection/index.rst
+++ b/Documentation/fault-injection/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ===============
 fault-injection
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index 1da65b9000de..ebca41785abe 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -187,7 +187,7 @@ the hardware. Thus, in a VGA console::
 Assuming the VGA driver can be unloaded, one must first unbind the VGA driver
 from the console layer before unloading the driver.  The VGA driver cannot be
 unloaded if it is still bound to the console layer. (See
-Documentation/console/console.txt for more information).
+Documentation/driver-api/console.rst for more information).
 
 This is more complicated in the case of the framebuffer console (fbcon),
 because fbcon is an intermediate layer between the console and the drivers::
@@ -204,7 +204,7 @@ fbcon. Thus, there is no need to explicitly unbind the fbdev drivers from
 fbcon.
 
 So, how do we unbind fbcon from the console? Part of the answer is in
-Documentation/console/console.txt. To summarize:
+Documentation/driver-api/console.rst. To summarize:
 
 Echo a value to the bind file that represents the framebuffer console
 driver. So assuming vtcon1 represents fbcon, then::
diff --git a/Documentation/fb/index.rst b/Documentation/fb/index.rst
index d47313714635..baf02393d8ee 100644
--- a/Documentation/fb/index.rst
+++ b/Documentation/fb/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ============
 Frame Buffer
diff --git a/Documentation/fb/vesafb.rst b/Documentation/fb/vesafb.rst
index 2ed0dfb661cf..6821c87b7893 100644
--- a/Documentation/fb/vesafb.rst
+++ b/Documentation/fb/vesafb.rst
@@ -30,7 +30,7 @@ How to use it?
 ==============
 
 Switching modes is done using the vga=... boot parameter.  Read
-Documentation/svga.txt for details.
+Documentation/admin-guide/svga.rst for details.
 
 You should compile in both vgacon (for text mode) and vesafb (for
 graphics mode). Which of them takes over the console depends on
diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index d2963123eb1c..ae4332464560 100644
--- a/Documentation/filesystems/nfs/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
@@ -239,7 +239,7 @@ rdinit=<executable file>
   A description of the process of mounting the root file system can be
   found in:
 
-    Documentation/early-userspace/README
+    Documentation/driver-api/early-userspace/early_userspace_support.rst
 
 
 
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index d750b6926899..fb4735fd73b0 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1500,7 +1500,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
 This chapter  is  heavily  based  on the documentation included in the pre 2.2
 kernels, and became part of it in version 2.2.1 of the Linux kernel.
 
-Please see: Documentation/sysctl/ directory for descriptions of these
+Please see: Documentation/admin-guide/sysctl/ directory for descriptions of these
 entries.
 
 ------------------------------------------------------------------------------
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 79637d227e85..97d42ccaa92d 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -105,7 +105,7 @@ All this differs from the old initrd in several ways:
   - The old initrd file was a gzipped filesystem image (in some file format,
     such as ext2, that needed a driver built into the kernel), while the new
     initramfs archive is a gzipped cpio archive (like tar only simpler,
-    see cpio(1) and Documentation/early-userspace/buffer-format.txt).  The
+    see cpio(1) and Documentation/driver-api/early-userspace/buffer-format.rst).  The
     kernel's cpio extraction code is not only extremely small, it's also
     __init text and data that can be discarded during the boot process.
 
@@ -159,7 +159,7 @@ One advantage of the configuration file is that root access is not required to
 set permissions or create device nodes in the new archive.  (Note that those
 two example "file" entries expect to find files named "init.sh" and "busybox" in
 a directory called "initramfs", under the linux-2.6.* directory.  See
-Documentation/early-userspace/README for more details.)
+Documentation/driver-api/early-userspace/early_userspace_support.rst for more details.)
 
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 5b5311f9358d..ddf15b1b0d5a 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -319,7 +319,7 @@ quick way to lookup the sysfs interface for a device from the result of
 a stat(2) operation.
 
 More information can driver-model specific features can be found in
-Documentation/driver-model/. 
+Documentation/driver-api/driver-model/.
 
 
 TODO: Finish this section.
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index cad797a8a39e..5ecbc03e6b2f 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -98,7 +98,7 @@ A memory policy with a valid NodeList will be saved, as specified, for
 use at file creation time.  When a task allocates a file in the file
 system, the mount option memory policy will be applied with a NodeList,
 if any, modified by the calling task's cpuset constraints
-[See Documentation/cgroup-v1/cpusets.rst] and any optional flags, listed
+[See Documentation/admin-guide/cgroup-v1/cpusets.rst] and any optional flags, listed
 below.  If the resulting NodeLists is the empty set, the effective memory
 policy for the file will revert to "default" policy.
 
diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst
index 1252617b520f..0a72b6321f5f 100644
--- a/Documentation/firmware-guide/acpi/enumeration.rst
+++ b/Documentation/firmware-guide/acpi/enumeration.rst
@@ -316,7 +316,7 @@ specifies the path to the controller. In order to use these GPIOs in Linux
 we need to translate them to the corresponding Linux GPIO descriptors.
 
 There is a standard GPIO API for that and is documented in
-Documentation/gpio/.
+Documentation/admin-guide/gpio/.
 
 In the above example we can get the corresponding two GPIO descriptors with
 a code like this::
diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst
index 2c87d1ea084f..f80f95667ca2 100644
--- a/Documentation/fpga/index.rst
+++ b/Documentation/fpga/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ====
 fpga
diff --git a/Documentation/hid/index.rst b/Documentation/hid/index.rst
index af4324902622..737d66dc16a1 100644
--- a/Documentation/hid/index.rst
+++ b/Documentation/hid/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 =============================
 Human Interface Devices (HID)
diff --git a/Documentation/hwmon/submitting-patches.rst b/Documentation/hwmon/submitting-patches.rst
index d5b05d3e54ba..452fc28d8e0b 100644
--- a/Documentation/hwmon/submitting-patches.rst
+++ b/Documentation/hwmon/submitting-patches.rst
@@ -89,7 +89,7 @@ increase the chances of your change being accepted.
   console. Excessive logging can seriously affect system performance.
 
 * Use devres functions whenever possible to allocate resources. For rationale
-  and supported functions, please see Documentation/driver-model/devres.rst.
+  and supported functions, please see Documentation/driver-api/driver-model/devres.rst.
   If a function is not supported by devres, consider using devm_add_action().
 
 * If the driver has a detect function, make sure it is silent. Debug messages
diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.rst
index 5a4dea6abebd..a08b36aba015 100644
--- a/Documentation/ia64/aliasing.txt
+++ b/Documentation/ia64/aliasing.rst
@@ -1,20 +1,25 @@
-	         MEMORY ATTRIBUTE ALIASING ON IA-64
+==================================
+Memory Attribute Aliasing on IA-64
+==================================
 
-			   Bjorn Helgaas
-		       <bjorn.helgaas@hp.com>
-			    May 4, 2006
+Bjorn Helgaas <bjorn.helgaas@hp.com>
 
+May 4, 2006
 
-MEMORY ATTRIBUTES
+
+Memory Attributes
+=================
 
     Itanium supports several attributes for virtual memory references.
     The attribute is part of the virtual translation, i.e., it is
     contained in the TLB entry.  The ones of most interest to the Linux
     kernel are:
 
-	WB		Write-back (cacheable)
+	==		======================
+        WB		Write-back (cacheable)
 	UC		Uncacheable
 	WC		Write-coalescing
+	==		======================
 
     System memory typically uses the WB attribute.  The UC attribute is
     used for memory-mapped I/O devices.  The WC attribute is uncacheable
@@ -29,7 +34,8 @@ MEMORY ATTRIBUTES
     support either WB or UC access to main memory, while others support
     only WB access.
 
-MEMORY MAP
+Memory Map
+==========
 
     Platform firmware describes the physical memory map and the
     supported attributes for each region.  At boot-time, the kernel uses
@@ -55,7 +61,8 @@ MEMORY MAP
     The efi_memmap table is preserved unmodified because the original
     boot-time information is required for kexec.
 
-KERNEL IDENTITY MAPPINGS
+Kernel Identify Mappings
+========================
 
     Linux/ia64 identity mappings are done with large pages, currently
     either 16MB or 64MB, referred to as "granules."  Cacheable mappings
@@ -74,17 +81,20 @@ KERNEL IDENTITY MAPPINGS
     are only partially populated, or populated with a combination of UC
     and WB regions.
 
-USER MAPPINGS
+User Mappings
+=============
 
     User mappings are typically done with 16K or 64K pages.  The smaller
     page size allows more flexibility because only 16K or 64K has to be
     homogeneous with respect to memory attributes.
 
-POTENTIAL ATTRIBUTE ALIASING CASES
+Potential Attribute Aliasing Cases
+==================================
 
     There are several ways the kernel creates new mappings:
 
-    mmap of /dev/mem
+mmap of /dev/mem
+----------------
 
 	This uses remap_pfn_range(), which creates user mappings.  These
 	mappings may be either WB or UC.  If the region being mapped
@@ -98,7 +108,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	Since the EFI memory map does not describe MMIO on some
 	machines, this should use an uncacheable mapping as a fallback.
 
-    mmap of /sys/class/pci_bus/.../legacy_mem
+mmap of /sys/class/pci_bus/.../legacy_mem
+-----------------------------------------
 
 	This is very similar to mmap of /dev/mem, except that legacy_mem
 	only allows mmap of the one megabyte "legacy MMIO" area for a
@@ -112,9 +123,10 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 
 	The /dev/mem mmap constraints apply.
 
-    mmap of /proc/bus/pci/.../??.?
+mmap of /proc/bus/pci/.../??.?
+------------------------------
 
-    	This is an MMIO mmap of PCI functions, which additionally may or
+	This is an MMIO mmap of PCI functions, which additionally may or
 	may not be requested as using the WC attribute.
 
 	If WC is requested, and the region in kern_memmap is either WC
@@ -124,7 +136,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	Otherwise, the user mapping must use the same attribute as the
 	kernel mapping.
 
-    read/write of /dev/mem
+read/write of /dev/mem
+----------------------
 
 	This uses copy_from_user(), which implicitly uses a kernel
 	identity mapping.  This is obviously safe for things in
@@ -138,7 +151,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	eight-byte accesses, and the copy_from_user() path doesn't allow
 	any control over the access size, so this would be dangerous.
 
-    ioremap()
+ioremap()
+---------
 
 	This returns a mapping for use inside the kernel.
 
@@ -155,9 +169,11 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 
 	Failing all of the above, we have to fall back to a UC mapping.
 
-PAST PROBLEM CASES
+Past Problem Cases
+==================
 
-    mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+--------------------------------------------------------------------
 
       The EFI memory map may not report these MMIO regions.
 
@@ -166,12 +182,16 @@ PAST PROBLEM CASES
       succeed.  It may create either WB or UC user mappings, depending
       on whether the region is in kern_memmap or the EFI memory map.
 
-    mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+----------------------------------------------------------------------
 
       The EFI memory map reports the following attributes:
+
+        =============== ======= ==================
         0x00000-0x9FFFF WB only
         0xA0000-0xBFFFF UC only (VGA frame buffer)
         0xC0000-0xFFFFF WB only
+        =============== ======= ==================
 
       This mmap is done with user pages, not kernel identity mappings,
       so it is safe to use WB mappings.
@@ -182,7 +202,8 @@ PAST PROBLEM CASES
       never generate an uncacheable reference to the WB-only areas unless
       the driver explicitly touches them.
 
-    mmap of 0x0-0xFFFFF legacy_mem by "X"
+mmap of 0x0-0xFFFFF legacy_mem by "X"
+-------------------------------------
 
       If the EFI memory map reports that the entire range supports the
       same attributes, we can allow the mmap (and we will prefer WB if
@@ -197,15 +218,18 @@ PAST PROBLEM CASES
       that doesn't report the VGA frame buffer at all), we should fail the
       mmap and force the user to map just the specific region of interest.
 
-    mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+------------------------------------------------------------------------
+
+      The EFI memory map reports the following attributes::
 
-      The EFI memory map reports the following attributes:
         0x00000-0xFFFFF WB only (no VGA MMIO hole)
 
       This is a special case of the previous case, and the mmap should
       fail for the same reason as above.
 
-    read of /sys/devices/.../rom
+read of /sys/devices/.../rom
+----------------------------
 
       For VGA devices, this may cause an ioremap() of 0xC0000.  This
       used to be done with a UC mapping, because the VGA frame buffer
@@ -215,7 +239,8 @@ PAST PROBLEM CASES
       We should use WB page table mappings to avoid covering the VGA
       frame buffer.
 
-NOTES
+Notes
+=====
 
     [1] SDM rev 2.2, vol 2, sec 4.4.1.
     [2] SDM rev 2.2, vol 2, sec 4.4.6.
diff --git a/Documentation/ia64/efirtc.txt b/Documentation/ia64/efirtc.rst
index 057e6bebda8f..2f7ff5026308 100644
--- a/Documentation/ia64/efirtc.txt
+++ b/Documentation/ia64/efirtc.rst
@@ -1,12 +1,16 @@
+==========================
 EFI Real Time Clock driver
--------------------------------
+==========================
+
 S. Eranian <eranian@hpl.hp.com>
+
 March 2000
 
-I/ Introduction
+1. Introduction
+===============
 
 This document describes the efirtc.c driver has provided for
-the IA-64 platform. 
+the IA-64 platform.
 
 The purpose of this driver is to supply an API for kernel and user applications
 to get access to the Time Service offered by EFI version 0.92.
@@ -16,112 +20,124 @@ SetTime(), GetWakeupTime(), SetWakeupTime() which are all supported by this
 driver. We describe those calls as well the design of the driver in the
 following sections.
 
-II/ Design Decisions
+2. Design Decisions
+===================
 
-The original ideas was to provide a very simple driver to get access to, 
-at first, the time of day service. This is required in order to access, in a 
-portable way, the CMOS clock. A program like /sbin/hwclock uses such a clock 
+The original ideas was to provide a very simple driver to get access to,
+at first, the time of day service. This is required in order to access, in a
+portable way, the CMOS clock. A program like /sbin/hwclock uses such a clock
 to initialize the system view of the time during boot.
 
 Because we wanted to minimize the impact on existing user-level apps using
 the CMOS clock, we decided to expose an API that was very similar to the one
-used today with the legacy RTC driver (driver/char/rtc.c). However, because 
+used today with the legacy RTC driver (driver/char/rtc.c). However, because
 EFI provides a simpler services, not all ioctl() are available. Also
-new ioctl()s have been introduced for things that EFI provides but not the 
+new ioctl()s have been introduced for things that EFI provides but not the
 legacy.
 
 EFI uses a slightly different way of representing the time, noticeably
 the reference date is different. Year is the using the full 4-digit format.
 The Epoch is January 1st 1998. For backward compatibility reasons we don't
-expose this new way of representing time. Instead we use something very 
+expose this new way of representing time. Instead we use something very
 similar to the struct tm, i.e. struct rtc_time, as used by hwclock.
 One of the reasons for doing it this way is to allow for EFI to still evolve
 without necessarily impacting any of the user applications. The decoupling
 enables flexibility and permits writing wrapper code is ncase things change.
 
 The driver exposes two interfaces, one via the device file and a set of
-ioctl()s. The other is read-only via the /proc filesystem. 
+ioctl()s. The other is read-only via the /proc filesystem.
 
 As of today we don't offer a /proc/sys interface.
 
 To allow for a uniform interface between the legacy RTC and EFI time service,
-we have created the include/linux/rtc.h header file to contain only the 
-"public" API of the two drivers.  The specifics of the legacy RTC are still 
+we have created the include/linux/rtc.h header file to contain only the
+"public" API of the two drivers.  The specifics of the legacy RTC are still
 in include/linux/mc146818rtc.h.
 
- 
-III/ Time of day service
+
+3. Time of day service
+======================
 
 The part of the driver gives access to the time of day service of EFI.
 Two ioctl()s, compatible with the legacy RTC calls:
 
-	Read the CMOS clock: ioctl(d, RTC_RD_TIME, &rtc);
+	Read the CMOS clock::
+
+		ioctl(d, RTC_RD_TIME, &rtc);
+
+	Write the CMOS clock::
 
-	Write the CMOS clock: ioctl(d, RTC_SET_TIME, &rtc);
+		ioctl(d, RTC_SET_TIME, &rtc);
 
 The rtc is a pointer to a data structure defined in rtc.h which is close
-to a struct tm:
-
-struct rtc_time {
-        int tm_sec;
-        int tm_min;
-        int tm_hour;
-        int tm_mday;
-        int tm_mon;
-        int tm_year;
-        int tm_wday;
-        int tm_yday;
-        int tm_isdst;
-};
+to a struct tm::
+
+  struct rtc_time {
+          int tm_sec;
+          int tm_min;
+          int tm_hour;
+          int tm_mday;
+          int tm_mon;
+          int tm_year;
+          int tm_wday;
+          int tm_yday;
+          int tm_isdst;
+  };
 
 The driver takes care of converting back an forth between the EFI time and
 this format.
 
 Those two ioctl()s can be exercised with the hwclock command:
 
-For reading:
-# /sbin/hwclock --show
-Mon Mar  6 15:32:32 2000  -0.910248 seconds
+For reading::
 
-For setting:
-# /sbin/hwclock --systohc
+	# /sbin/hwclock --show
+	Mon Mar  6 15:32:32 2000  -0.910248 seconds
+
+For setting::
+
+	# /sbin/hwclock --systohc
 
 Root privileges are required to be able to set the time of day.
 
-IV/ Wakeup Alarm service
+4. Wakeup Alarm service
+=======================
 
 EFI provides an API by which one can program when a machine should wakeup,
 i.e. reboot. This is very different from the alarm provided by the legacy
 RTC which is some kind of interval timer alarm. For this reason we don't use
 the same ioctl()s to get access to the service. Instead we have
-introduced 2 news ioctl()s to the interface of an RTC. 
+introduced 2 news ioctl()s to the interface of an RTC.
 
 We have added 2 new ioctl()s that are specific to the EFI driver:
 
-	Read the current state of the alarm
-	ioctl(d, RTC_WKLAM_RD, &wkt)
+	Read the current state of the alarm::
+
+		ioctl(d, RTC_WKLAM_RD, &wkt)
+
+	Set the alarm or change its status::
+
+		ioctl(d, RTC_WKALM_SET, &wkt)
 
-	Set the alarm or change its status
-	ioctl(d, RTC_WKALM_SET, &wkt)
+The wkt structure encapsulates a struct rtc_time + 2 extra fields to get
+status information::
 
-The wkt structure encapsulates a struct rtc_time + 2 extra fields to get 
-status information:
-	
-struct rtc_wkalrm {
+  struct rtc_wkalrm {
 
-        unsigned char enabled; /* =1 if alarm is enabled */
-        unsigned char pending; /* =1 if alarm is pending  */
+          unsigned char enabled; /* =1 if alarm is enabled */
+          unsigned char pending; /* =1 if alarm is pending  */
 
-        struct rtc_time time;
-} 
+          struct rtc_time time;
+  }
 
 As of today, none of the existing user-level apps supports this feature.
-However writing such a program should be hard by simply using those two 
-ioctl(). 
+However writing such a program should be hard by simply using those two
+ioctl().
 
 Root privileges are required to be able to set the alarm.
 
-V/ References.
+5. References
+=============
 
 Checkout the following Web site for more information on EFI:
 
diff --git a/Documentation/ia64/err_inject.txt b/Documentation/ia64/err_inject.rst
index 9f651c181429..900f71e93a29 100644
--- a/Documentation/ia64/err_inject.txt
+++ b/Documentation/ia64/err_inject.rst
@@ -1,4 +1,4 @@
-
+========================================
 IPF Machine Check (MC) error inject tool
 ========================================
 
@@ -32,94 +32,94 @@ Errata: Itanium 2 Processors Specification Update lists some errata against
 the pal_mc_error_inject PAL procedure. The following err.conf has been tested
 on latest Montecito PAL.
 
-err.conf:
+err.conf::
 
-#This is configuration file for err_inject_tool.
-#The format of the each line is:
-#cpu, loop, interval, err_type_info, err_struct_info, err_data_buffer
-#where
-#	cpu: logical cpu number the error will be inject in.
-#	loop: times the error will be injected.
-#	interval: In second. every so often one error is injected.
-#	err_type_info, err_struct_info: PAL parameters.
-#
-#Note: All values are hex w/o or w/ 0x prefix.
+  #This is configuration file for err_inject_tool.
+  #The format of the each line is:
+  #cpu, loop, interval, err_type_info, err_struct_info, err_data_buffer
+  #where
+  #	cpu: logical cpu number the error will be inject in.
+  #	loop: times the error will be injected.
+  #	interval: In second. every so often one error is injected.
+  #	err_type_info, err_struct_info: PAL parameters.
+  #
+  #Note: All values are hex w/o or w/ 0x prefix.
 
 
-#On cpu2, inject only total 0x10 errors, interval 5 seconds
-#corrected, data cache, hier-2, physical addr(assigned by tool code).
-#working on Montecito latest PAL.
-2, 10, 5, 4101, 95
+  #On cpu2, inject only total 0x10 errors, interval 5 seconds
+  #corrected, data cache, hier-2, physical addr(assigned by tool code).
+  #working on Montecito latest PAL.
+  2, 10, 5, 4101, 95
 
-#On cpu4, inject and consume total 0x10 errors, interval 5 seconds
-#corrected, data cache, hier-2, physical addr(assigned by tool code).
-#working on Montecito latest PAL.
-4, 10, 5, 4109, 95
+  #On cpu4, inject and consume total 0x10 errors, interval 5 seconds
+  #corrected, data cache, hier-2, physical addr(assigned by tool code).
+  #working on Montecito latest PAL.
+  4, 10, 5, 4109, 95
 
-#On cpu15, inject and consume total 0x10 errors, interval 5 seconds
-#recoverable, DTR0, hier-2.
-#working on Montecito latest PAL.
-0xf, 0x10, 5, 4249, 15
+  #On cpu15, inject and consume total 0x10 errors, interval 5 seconds
+  #recoverable, DTR0, hier-2.
+  #working on Montecito latest PAL.
+  0xf, 0x10, 5, 4249, 15
 
 The sample application source code:
 
-err_injection_tool.c:
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright (C) 2006 Intel Co
- *	Fenghua Yu <fenghua.yu@intel.com>
- *
- */
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sched.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <errno.h>
-#include <time.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <sys/wait.h>
-#include <sys/mman.h>
-#include <sys/shm.h>
-
-#define MAX_FN_SIZE 		256
-#define MAX_BUF_SIZE 		256
-#define DATA_BUF_SIZE 		256
-#define NR_CPUS 		512
-#define MAX_TASK_NUM		2048
-#define MIN_INTERVAL		5	// seconds
-#define	ERR_DATA_BUFFER_SIZE 	3	// Three 8-byte.
-#define PARA_FIELD_NUM		5
-#define MASK_SIZE		(NR_CPUS/64)
-#define PATH_FORMAT "/sys/devices/system/cpu/cpu%d/err_inject/"
-
-int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *mask);
-
-int verbose;
-#define vbprintf if (verbose) printf
-
-int log_info(int cpu, const char *fmt, ...)
-{
+err_injection_tool.c::
+
+  /*
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License as published by
+   * the Free Software Foundation; either version 2 of the License, or
+   * (at your option) any later version.
+   *
+   * This program is distributed in the hope that it will be useful, but
+   * WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+   * NON INFRINGEMENT.  See the GNU General Public License for more
+   * details.
+   *
+   * You should have received a copy of the GNU General Public License
+   * along with this program; if not, write to the Free Software
+   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+   *
+   * Copyright (C) 2006 Intel Co
+   *	Fenghua Yu <fenghua.yu@intel.com>
+   *
+   */
+  #include <sys/types.h>
+  #include <sys/stat.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <sched.h>
+  #include <unistd.h>
+  #include <stdlib.h>
+  #include <stdarg.h>
+  #include <string.h>
+  #include <errno.h>
+  #include <time.h>
+  #include <sys/ipc.h>
+  #include <sys/sem.h>
+  #include <sys/wait.h>
+  #include <sys/mman.h>
+  #include <sys/shm.h>
+
+  #define MAX_FN_SIZE 		256
+  #define MAX_BUF_SIZE 		256
+  #define DATA_BUF_SIZE 		256
+  #define NR_CPUS 		512
+  #define MAX_TASK_NUM		2048
+  #define MIN_INTERVAL		5	// seconds
+  #define	ERR_DATA_BUFFER_SIZE 	3	// Three 8-byte.
+  #define PARA_FIELD_NUM		5
+  #define MASK_SIZE		(NR_CPUS/64)
+  #define PATH_FORMAT "/sys/devices/system/cpu/cpu%d/err_inject/"
+
+  int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *mask);
+
+  int verbose;
+  #define vbprintf if (verbose) printf
+
+  int log_info(int cpu, const char *fmt, ...)
+  {
 	FILE *log;
 	char fn[MAX_FN_SIZE];
 	char buf[MAX_BUF_SIZE];
@@ -142,12 +142,12 @@ int log_info(int cpu, const char *fmt, ...)
 	fclose(log);
 
 	return 0;
-}
+  }
 
-typedef unsigned long u64;
-typedef unsigned int  u32;
+  typedef unsigned long u64;
+  typedef unsigned int  u32;
 
-typedef union err_type_info_u {
+  typedef union err_type_info_u {
 	struct {
 		u64	mode		: 3,	/* 0-2 */
 			err_inj		: 3,	/* 3-5 */
@@ -157,9 +157,9 @@ typedef union err_type_info_u {
 			reserved	: 48;	/* 16-63 */
 	} err_type_info_u;
 	u64	err_type_info;
-} err_type_info_t;
+  } err_type_info_t;
 
-typedef union err_struct_info_u {
+  typedef union err_struct_info_u {
 	struct {
 		u64	siv		: 1,	/* 0	 */
 			c_t		: 2,	/* 1-2	 */
@@ -197,9 +197,9 @@ typedef union err_struct_info_u {
 		u64	reserved;
 	} err_struct_info_bus_processor_interconnect;
 	u64	err_struct_info;
-} err_struct_info_t;
+  } err_struct_info_t;
 
-typedef union err_data_buffer_u {
+  typedef union err_data_buffer_u {
 	struct {
 		u64	trigger_addr;		/* 0-63		*/
 		u64	inj_addr;		/* 64-127 	*/
@@ -221,9 +221,9 @@ typedef union err_data_buffer_u {
 		u64	reserved;		/* 0-63		*/
 	} err_data_buffer_bus_processor_interconnect;
 	u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
-} err_data_buffer_t;
+  } err_data_buffer_t;
 
-typedef union capabilities_u {
+  typedef union capabilities_u {
 	struct {
 		u64	i		: 1,
 			d		: 1,
@@ -276,9 +276,9 @@ typedef union capabilities_u {
 	struct {
 		u64	reserved;
 	} capabilities_bus_processor_interconnect;
-} capabilities_t;
+  } capabilities_t;
 
-typedef struct resources_s {
+  typedef struct resources_s {
 	u64	ibr0		: 1,
 		ibr2		: 1,
 		ibr4		: 1,
@@ -288,24 +288,24 @@ typedef struct resources_s {
 		dbr4		: 1,
 		dbr6		: 1,
 		reserved	: 48;
-} resources_t;
+  } resources_t;
 
 
-long get_page_size(void)
-{
+  long get_page_size(void)
+  {
 	long page_size=sysconf(_SC_PAGESIZE);
 	return page_size;
-}
+  }
 
-#define PAGE_SIZE (get_page_size()==-1?0x4000:get_page_size())
-#define SHM_SIZE (2*PAGE_SIZE*NR_CPUS)
-#define SHM_VA 0x2000000100000000
+  #define PAGE_SIZE (get_page_size()==-1?0x4000:get_page_size())
+  #define SHM_SIZE (2*PAGE_SIZE*NR_CPUS)
+  #define SHM_VA 0x2000000100000000
 
-int shmid;
-void *shmaddr;
+  int shmid;
+  void *shmaddr;
 
-int create_shm(void)
-{
+  int create_shm(void)
+  {
 	key_t key;
 	char fn[MAX_FN_SIZE];
 
@@ -343,34 +343,34 @@ int create_shm(void)
 	mlock(shmaddr, SHM_SIZE);
 
 	return 0;
-}
+  }
 
-int free_shm()
-{
+  int free_shm()
+  {
 	munlock(shmaddr, SHM_SIZE);
-        shmdt(shmaddr);
+          shmdt(shmaddr);
 	semctl(shmid, 0, IPC_RMID);
 
 	return 0;
-}
+  }
 
-#ifdef _SEM_SEMUN_UNDEFINED
-union semun
-{
+  #ifdef _SEM_SEMUN_UNDEFINED
+  union semun
+  {
 	int val;
 	struct semid_ds *buf;
 	unsigned short int *array;
 	struct seminfo *__buf;
-};
-#endif
+  };
+  #endif
 
-u32 mode=1; /* 1: physical mode; 2: virtual mode. */
-int one_lock=1;
-key_t key[NR_CPUS];
-int semid[NR_CPUS];
+  u32 mode=1; /* 1: physical mode; 2: virtual mode. */
+  int one_lock=1;
+  key_t key[NR_CPUS];
+  int semid[NR_CPUS];
 
-int create_sem(int cpu)
-{
+  int create_sem(int cpu)
+  {
 	union semun arg;
 	char fn[MAX_FN_SIZE];
 	int sid;
@@ -407,37 +407,37 @@ int create_sem(int cpu)
 	}
 
 	return 0;
-}
+  }
 
-static int lock(int cpu)
-{
+  static int lock(int cpu)
+  {
 	struct sembuf lock;
 
 	lock.sem_num = cpu;
 	lock.sem_op = 1;
 	semop(semid[cpu], &lock, 1);
 
-        return 0;
-}
+          return 0;
+  }
 
-static int unlock(int cpu)
-{
+  static int unlock(int cpu)
+  {
 	struct sembuf unlock;
 
 	unlock.sem_num = cpu;
 	unlock.sem_op = -1;
 	semop(semid[cpu], &unlock, 1);
 
-        return 0;
-}
+          return 0;
+  }
 
-void free_sem(int cpu)
-{
+  void free_sem(int cpu)
+  {
 	semctl(semid[cpu], 0, IPC_RMID);
-}
+  }
 
-int wr_multi(char *fn, unsigned long *data, int size)
-{
+  int wr_multi(char *fn, unsigned long *data, int size)
+  {
 	int fd;
 	char buf[MAX_BUF_SIZE];
 	int ret;
@@ -459,15 +459,15 @@ int wr_multi(char *fn, unsigned long *data, int size)
 	ret=write(fd, buf, sizeof(buf));
 	close(fd);
 	return ret;
-}
+  }
 
-int wr(char *fn, unsigned long data)
-{
+  int wr(char *fn, unsigned long data)
+  {
 	return wr_multi(fn, &data, 1);
-}
+  }
 
-int rd(char *fn, unsigned long *data)
-{
+  int rd(char *fn, unsigned long *data)
+  {
 	int fd;
 	char buf[MAX_BUF_SIZE];
 
@@ -480,10 +480,10 @@ int rd(char *fn, unsigned long *data)
 	*data=strtoul(buf, NULL, 16);
 	close(fd);
 	return 0;
-}
+  }
 
-int rd_status(char *path, int *status)
-{
+  int rd_status(char *path, int *status)
+  {
 	char fn[MAX_FN_SIZE];
 	sprintf(fn, "%s/status", path);
 	if (rd(fn, (u64*)status)<0) {
@@ -492,10 +492,10 @@ int rd_status(char *path, int *status)
 	}
 
 	return 0;
-}
+  }
 
-int rd_capabilities(char *path, u64 *capabilities)
-{
+  int rd_capabilities(char *path, u64 *capabilities)
+  {
 	char fn[MAX_FN_SIZE];
 	sprintf(fn, "%s/capabilities", path);
 	if (rd(fn, capabilities)<0) {
@@ -504,10 +504,10 @@ int rd_capabilities(char *path, u64 *capabilities)
 	}
 
 	return 0;
-}
+  }
 
-int rd_all(char *path)
-{
+  int rd_all(char *path)
+  {
 	unsigned long err_type_info, err_struct_info, err_data_buffer;
 	int status;
 	unsigned long capabilities, resources;
@@ -556,11 +556,11 @@ int rd_all(char *path)
 	printf("resources=%lx\n", resources);
 
 	return 0;
-}
+  }
 
-int query_capabilities(char *path, err_type_info_t err_type_info,
+  int query_capabilities(char *path, err_type_info_t err_type_info,
 			u64 *capabilities)
-{
+  {
 	char fn[MAX_FN_SIZE];
 	err_struct_info_t err_struct_info;
 	err_data_buffer_t err_data_buffer;
@@ -583,10 +583,10 @@ int query_capabilities(char *path, err_type_info_t err_type_info,
 		return -1;
 
 	return 0;
-}
+  }
 
-int query_all_capabilities()
-{
+  int query_all_capabilities()
+  {
 	int status;
 	err_type_info_t err_type_info;
 	int err_sev, err_struct, struct_hier;
@@ -629,12 +629,12 @@ int query_all_capabilities()
 	}
 
 	return 0;
-}
+  }
 
-int err_inject(int cpu, char *path, err_type_info_t err_type_info,
+  int err_inject(int cpu, char *path, err_type_info_t err_type_info,
 		err_struct_info_t err_struct_info,
 		err_data_buffer_t err_data_buffer)
-{
+  {
 	int status;
 	char fn[MAX_FN_SIZE];
 
@@ -667,13 +667,13 @@ int err_inject(int cpu, char *path, err_type_info_t err_type_info,
 	}
 
 	return status;
-}
+  }
 
-static int construct_data_buf(char *path, err_type_info_t err_type_info,
+  static int construct_data_buf(char *path, err_type_info_t err_type_info,
 		err_struct_info_t err_struct_info,
 		err_data_buffer_t *err_data_buffer,
 		void *va1)
-{
+  {
 	char fn[MAX_FN_SIZE];
 	u64 virt_addr=0, phys_addr=0;
 
@@ -710,22 +710,22 @@ static int construct_data_buf(char *path, err_type_info_t err_type_info,
 	}
 
 	return 0;
-}
+  }
 
-typedef struct {
+  typedef struct {
 	u64 cpu;
 	u64 loop;
 	u64 interval;
 	u64 err_type_info;
 	u64 err_struct_info;
 	u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
-} parameters_t;
+  } parameters_t;
 
-parameters_t line_para;
-int para;
+  parameters_t line_para;
+  int para;
 
-static int empty_data_buffer(u64 *err_data_buffer)
-{
+  static int empty_data_buffer(u64 *err_data_buffer)
+  {
 	int empty=1;
 	int i;
 
@@ -734,10 +734,10 @@ static int empty_data_buffer(u64 *err_data_buffer)
 		empty=0;
 
 	return empty;
-}
+  }
 
-int err_inj()
-{
+  int err_inj()
+  {
 	err_type_info_t err_type_info;
 	err_struct_info_t err_struct_info;
 	err_data_buffer_t err_data_buffer;
@@ -951,10 +951,10 @@ int err_inj()
 	printf("All done.\n");
 
 	return 0;
-}
+  }
 
-void help()
-{
+  void help()
+  {
 	printf("err_inject_tool:\n");
 	printf("\t-q: query all capabilities. default: off\n");
 	printf("\t-m: procedure mode. 1: physical 2: virtual. default: 1\n");
@@ -977,10 +977,10 @@ void help()
 	printf("The tool will take err.conf file as ");
 	printf("input to inject single or multiple errors ");
 	printf("on one or multiple cpus in parallel.\n");
-}
+  }
 
-int main(int argc, char **argv)
-{
+  int main(int argc, char **argv)
+  {
 	char c;
 	int do_err_inj=0;
 	int do_query_all=0;
@@ -1031,7 +1031,7 @@ int main(int argc, char **argv)
 				if (count!=PARA_FIELD_NUM+3) {
 				    line_para.err_data_buffer[0]=-1,
 				    line_para.err_data_buffer[1]=-1,
-			 	    line_para.err_data_buffer[2]=-1;
+				    line_para.err_data_buffer[2]=-1;
 				    count=sscanf(optarg, "%lx, %lx, %lx, %lx, %lx\n",
 						&line_para.cpu,
 						&line_para.loop,
@@ -1064,5 +1064,4 @@ int main(int argc, char **argv)
 		help();
 
 	return 0;
-}
-
+  }
diff --git a/Documentation/ia64/fsys.txt b/Documentation/ia64/fsys.rst
index 59dd689d9b86..a702d2cc94b6 100644
--- a/Documentation/ia64/fsys.txt
+++ b/Documentation/ia64/fsys.rst
@@ -1,9 +1,9 @@
--*-Mode: outline-*-
-
-		Light-weight System Calls for IA-64
-		-----------------------------------
+===================================
+Light-weight System Calls for IA-64
+===================================
 
 		        Started: 13-Jan-2003
+
 		    Last update: 27-Sep-2003
 
 	              David Mosberger-Tang
@@ -52,12 +52,13 @@ privilege level is at level 0, this means that fsys-mode requires some
 care (see below).
 
 
-* How to tell fsys-mode
+How to tell fsys-mode
+=====================
 
 Linux operates in fsys-mode when (a) the privilege level is 0 (most
 privileged) and (b) the stacks have NOT been switched to kernel memory
 yet.  For convenience, the header file <asm-ia64/ptrace.h> provides
-three macros:
+three macros::
 
 	user_mode(regs)
 	user_stack(task,regs)
@@ -70,11 +71,12 @@ to by "regs" was executing in user mode (privilege level 3).
 user_stack() returns TRUE if the state pointed to by "regs" was
 executing on the user-level stack(s).  Finally, fsys_mode() returns
 TRUE if the CPU state pointed to by "regs" was executing in fsys-mode.
-The fsys_mode() macro is equivalent to the expression:
+The fsys_mode() macro is equivalent to the expression::
 
 	!user_mode(regs) && user_stack(task,regs)
 
-* How to write an fsyscall handler
+How to write an fsyscall handler
+================================
 
 The file arch/ia64/kernel/fsys.S contains a table of fsyscall-handlers
 (fsyscall_table).  This table contains one entry for each system call.
@@ -87,66 +89,72 @@ of the getpid() system call.
 
 The entry and exit-state of an fsyscall handler is as follows:
 
-** Machine state on entry to fsyscall handler:
-
- - r10	  = 0
- - r11	  = saved ar.pfs (a user-level value)
- - r15	  = system call number
- - r16	  = "current" task pointer (in normal kernel-mode, this is in r13)
- - r32-r39 = system call arguments
- - b6	  = return address (a user-level value)
- - ar.pfs = previous frame-state (a user-level value)
- - PSR.be = cleared to zero (i.e., little-endian byte order is in effect)
- - all other registers may contain values passed in from user-mode
-
-** Required machine state on exit to fsyscall handler:
-
- - r11	  = saved ar.pfs (as passed into the fsyscall handler)
- - r15	  = system call number (as passed into the fsyscall handler)
- - r32-r39 = system call arguments (as passed into the fsyscall handler)
- - b6	  = return address (as passed into the fsyscall handler)
- - ar.pfs = previous frame-state (as passed into the fsyscall handler)
+Machine state on entry to fsyscall handler
+------------------------------------------
+
+  ========= ===============================================================
+  r10	    0
+  r11	    saved ar.pfs (a user-level value)
+  r15	    system call number
+  r16	    "current" task pointer (in normal kernel-mode, this is in r13)
+  r32-r39   system call arguments
+  b6	    return address (a user-level value)
+  ar.pfs    previous frame-state (a user-level value)
+  PSR.be    cleared to zero (i.e., little-endian byte order is in effect)
+  -         all other registers may contain values passed in from user-mode
+  ========= ===============================================================
+
+Required machine state on exit to fsyscall handler
+--------------------------------------------------
+
+  ========= ===========================================================
+  r11	    saved ar.pfs (as passed into the fsyscall handler)
+  r15	    system call number (as passed into the fsyscall handler)
+  r32-r39   system call arguments (as passed into the fsyscall handler)
+  b6	    return address (as passed into the fsyscall handler)
+  ar.pfs    previous frame-state (as passed into the fsyscall handler)
+  ========= ===========================================================
 
 Fsyscall handlers can execute with very little overhead, but with that
 speed comes a set of restrictions:
 
- o Fsyscall-handlers MUST check for any pending work in the flags
+ * Fsyscall-handlers MUST check for any pending work in the flags
    member of the thread-info structure and if any of the
    TIF_ALLWORK_MASK flags are set, the handler needs to fall back on
    doing a full system call (by calling fsys_fallback_syscall).
 
- o Fsyscall-handlers MUST preserve incoming arguments (r32-r39, r11,
+ * Fsyscall-handlers MUST preserve incoming arguments (r32-r39, r11,
    r15, b6, and ar.pfs) because they will be needed in case of a
    system call restart.  Of course, all "preserved" registers also
    must be preserved, in accordance to the normal calling conventions.
 
- o Fsyscall-handlers MUST check argument registers for containing a
+ * Fsyscall-handlers MUST check argument registers for containing a
    NaT value before using them in any way that could trigger a
    NaT-consumption fault.  If a system call argument is found to
    contain a NaT value, an fsyscall-handler may return immediately
    with r8=EINVAL, r10=-1.
 
- o Fsyscall-handlers MUST NOT use the "alloc" instruction or perform
+ * Fsyscall-handlers MUST NOT use the "alloc" instruction or perform
    any other operation that would trigger mandatory RSE
    (register-stack engine) traffic.
 
- o Fsyscall-handlers MUST NOT write to any stacked registers because
+ * Fsyscall-handlers MUST NOT write to any stacked registers because
    it is not safe to assume that user-level called a handler with the
    proper number of arguments.
 
- o Fsyscall-handlers need to be careful when accessing per-CPU variables:
+ * Fsyscall-handlers need to be careful when accessing per-CPU variables:
    unless proper safe-guards are taken (e.g., interruptions are avoided),
    execution may be pre-empted and resumed on another CPU at any given
    time.
 
- o Fsyscall-handlers must be careful not to leak sensitive kernel'
+ * Fsyscall-handlers must be careful not to leak sensitive kernel'
    information back to user-level.  In particular, before returning to
    user-level, care needs to be taken to clear any scratch registers
    that could contain sensitive information (note that the current
    task pointer is not considered sensitive: it's already exposed
    through ar.k6).
 
- o Fsyscall-handlers MUST NOT access user-memory without first
+ * Fsyscall-handlers MUST NOT access user-memory without first
    validating access-permission (this can be done typically via
    probe.r.fault and/or probe.w.fault) and without guarding against
    memory access exceptions (this can be done with the EX() macros
@@ -162,7 +170,8 @@ fast system call execution (while fully preserving system call
 semantics), but there is also a lot of flexibility in handling more
 complicated cases.
 
-* Signal handling
+Signal handling
+===============
 
 The delivery of (asynchronous) signals must be delayed until fsys-mode
 is exited.  This is accomplished with the help of the lower-privilege
@@ -173,7 +182,8 @@ PSR.lp and returns immediately.  When fsys-mode is exited via the
 occur.  The trap handler clears PSR.lp again and returns immediately.
 The kernel exit path then checks for and delivers any pending signals.
 
-* PSR Handling
+PSR Handling
+============
 
 The "epc" instruction doesn't change the contents of PSR at all.  This
 is in contrast to a regular interruption, which clears almost all
@@ -181,6 +191,7 @@ bits.  Because of that, some care needs to be taken to ensure things
 work as expected.  The following discussion describes how each PSR bit
 is handled.
 
+======= =======================================================================
 PSR.be	Cleared when entering fsys-mode.  A srlz.d instruction is used
 	to ensure the CPU is in little-endian mode before the first
 	load/store instruction is executed.  PSR.be is normally NOT
@@ -202,7 +213,8 @@ PSR.pp	Unchanged.
 PSR.di	Unchanged.
 PSR.si	Unchanged.
 PSR.db	Unchanged.  The kernel prevents user-level from setting a hardware
-	breakpoint that triggers at any privilege level other than 3 (user-mode).
+	breakpoint that triggers at any privilege level other than
+	3 (user-mode).
 PSR.lp	Unchanged.
 PSR.tb	Lazy redirect.  If a taken-branch trap occurs while in
 	fsys-mode, the trap-handler modifies the saved machine state
@@ -235,47 +247,52 @@ PSR.ed	Unchanged.  Note: This bit could only have an effect if an fsys-mode
 PSR.bn	Unchanged.  Note: fsys-mode handlers may clear the bit, if needed.
 	Doing so requires clearing PSR.i and PSR.ic as well.
 PSR.ia	Unchanged.  Note: the ia64 linux kernel never sets this bit.
+======= =======================================================================
 
-* Using fast system calls
+Using fast system calls
+=======================
 
 To use fast system calls, userspace applications need simply call
 __kernel_syscall_via_epc().  For example
 
 -- example fgettimeofday() call --
+
 -- fgettimeofday.S --
 
-#include <asm/asmmacro.h>
+::
+
+  #include <asm/asmmacro.h>
 
-GLOBAL_ENTRY(fgettimeofday)
-.prologue
-.save ar.pfs, r11
-mov r11 = ar.pfs
-.body 
+  GLOBAL_ENTRY(fgettimeofday)
+  .prologue
+  .save ar.pfs, r11
+  mov r11 = ar.pfs
+  .body
 
-mov r2 = 0xa000000000020660;;  // gate address 
-			       // found by inspection of System.map for the 
+  mov r2 = 0xa000000000020660;;  // gate address
+			       // found by inspection of System.map for the
 			       // __kernel_syscall_via_epc() function.  See
 			       // below for how to do this for real.
 
-mov b7 = r2
-mov r15 = 1087		       // gettimeofday syscall
-;;
-br.call.sptk.many b6 = b7
-;;
+  mov b7 = r2
+  mov r15 = 1087		       // gettimeofday syscall
+  ;;
+  br.call.sptk.many b6 = b7
+  ;;
 
-.restore sp
+  .restore sp
 
-mov ar.pfs = r11
-br.ret.sptk.many rp;;	      // return to caller
-END(fgettimeofday)
+  mov ar.pfs = r11
+  br.ret.sptk.many rp;;	      // return to caller
+  END(fgettimeofday)
 
 -- end fgettimeofday.S --
 
 In reality, getting the gate address is accomplished by two extra
 values passed via the ELF auxiliary vector (include/asm-ia64/elf.h)
 
- o AT_SYSINFO : is the address of __kernel_syscall_via_epc()
- o AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
+ * AT_SYSINFO : is the address of __kernel_syscall_via_epc()
+ * AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
 
 The ELF DSO is a pre-linked library that is mapped in by the kernel at
 the gate page.  It is a proper ELF shared object so, with a dynamic
diff --git a/Documentation/ia64/README b/Documentation/ia64/ia64.rst
index aa17f2154cba..b725019a9492 100644
--- a/Documentation/ia64/README
+++ b/Documentation/ia64/ia64.rst
@@ -1,43 +1,49 @@
-        Linux kernel release 2.4.xx for the IA-64 Platform
+===========================================
+Linux kernel release for the IA-64 Platform
+===========================================
 
-   These are the release notes for Linux version 2.4 for IA-64
+   These are the release notes for Linux since version 2.4 for IA-64
    platform.  This document provides information specific to IA-64
    ONLY, to get additional information about the Linux kernel also
    read the original Linux README provided with the kernel.
 
-INSTALLING the kernel:
+Installing the Kernel
+=====================
 
  - IA-64 kernel installation is the same as the other platforms, see
    original README for details.
 
 
-SOFTWARE REQUIREMENTS
+Software Requirements
+=====================
 
    Compiling and running this kernel requires an IA-64 compliant GCC
    compiler.  And various software packages also compiled with an
    IA-64 compliant GCC compiler.
 
 
-CONFIGURING the kernel:
+Configuring the Kernel
+======================
 
    Configuration is the same, see original README for details.
 
 
-COMPILING the kernel:
+Compiling the Kernel:
 
  - Compiling this kernel doesn't differ from other platform so read
    the original README for details BUT make sure you have an IA-64
    compliant GCC compiler.
 
-IA-64 SPECIFICS
+IA-64 Specifics
+===============
 
  - General issues:
 
-    o Hardly any performance tuning has been done. Obvious targets
+    * Hardly any performance tuning has been done. Obvious targets
       include the library routines (IP checksum, etc.). Less
       obvious targets include making sure we don't flush the TLB
       needlessly, etc.
 
-    o SMP locks cleanup/optimization
+    * SMP locks cleanup/optimization
 
-    o IA32 support.  Currently experimental.  It mostly works.
+    * IA32 support.  Currently experimental.  It mostly works.
diff --git a/Documentation/ia64/index.rst b/Documentation/ia64/index.rst
new file mode 100644
index 000000000000..0436e1034115
--- /dev/null
+++ b/Documentation/ia64/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+IA-64 Architecture
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+   ia64
+   aliasing
+   efirtc
+   err_inject
+   fsys
+   irq-redir
+   mca
+   serial
+   xen
diff --git a/Documentation/ia64/IRQ-redir.txt b/Documentation/ia64/irq-redir.rst
index f7bd72261283..39bf94484a15 100644
--- a/Documentation/ia64/IRQ-redir.txt
+++ b/Documentation/ia64/irq-redir.rst
@@ -1,6 +1,8 @@
+==============================
 IRQ affinity on IA64 platforms
-------------------------------
-                           07.01.2002, Erich Focht <efocht@ess.nec.de>
+==============================
+
+07.01.2002, Erich Focht <efocht@ess.nec.de>
 
 
 By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
@@ -12,22 +14,27 @@ IRQ target is one particular CPU and cannot be a mask of several
 CPUs. Only the first non-zero bit is taken into account.
 
 
-Usage examples:
+Usage examples
+==============
 
 The target CPU has to be specified as a hexadecimal CPU mask. The
 first non-zero bit is the selected CPU. This format has been kept for
 compatibility reasons with i386.
 
 Set the delivery mode of interrupt 41 to fixed and route the
-interrupts to CPU #3 (logical CPU number) (2^3=0x08):
+interrupts to CPU #3 (logical CPU number) (2^3=0x08)::
+
      echo "8" >/proc/irq/41/smp_affinity
 
 Set the default route for IRQ number 41 to CPU 6 in lowest priority
-delivery mode (redirectable):
+delivery mode (redirectable)::
+
      echo "r 40" >/proc/irq/41/smp_affinity
 
-The output of the command
+The output of the command::
+
      cat /proc/irq/IRQ#/smp_affinity
+
 gives the target CPU mask for the specified interrupt vector. If the CPU
 mask is preceded by the character "r", the interrupt is redirectable
 (i.e. lowest priority mode routing is used), otherwise its route is
@@ -35,7 +42,8 @@ fixed.
 
 
 
-Initialization and default behavior:
+Initialization and default behavior
+===================================
 
 If the platform features IRQ redirection (info provided by SAL) all
 IO-SAPIC interrupts are initialized with CPU#0 as their default target
@@ -43,9 +51,11 @@ and the routing is the so called "lowest priority mode" (actually
 fixed SAPIC mode with hint). The XTP chipset registers are used as hints
 for the IRQ routing. Currently in Linux XTP registers can have three
 values:
+
 	- minimal for an idle task,
 	- normal if any other task runs,
 	- maximal if the CPU is going to be switched off.
+
 The IRQ is routed to the CPU with lowest XTP register value, the
 search begins at the default CPU. Therefore most of the interrupts
 will be handled by CPU #0.
@@ -53,12 +63,14 @@ will be handled by CPU #0.
 If the platform doesn't feature interrupt redirection IOSAPIC fixed
 routing is used. The target CPUs are distributed in a round robin
 manner. IRQs will be routed only to the selected target CPUs. Check
-with
+with::
+
         cat /proc/interrupts
 
 
 
-Comments:
+Comments
+========
 
 On large (multi-node) systems it is recommended to route the IRQs to
 the node to which the corresponding device is connected.
@@ -66,4 +78,3 @@ For systems like the NEC AzusA we get IRQ node-affinity for free. This
 is because usually the chipsets on each node redirect the interrupts
 only to their own CPUs (as they cannot see the XTP registers on the
 other nodes).
-
diff --git a/Documentation/ia64/mca.txt b/Documentation/ia64/mca.rst
index f097c60cba1b..08270bba44a4 100644
--- a/Documentation/ia64/mca.txt
+++ b/Documentation/ia64/mca.rst
@@ -1,5 +1,8 @@
-An ad-hoc collection of notes on IA64 MCA and INIT processing.  Feel
-free to update it with notes about any area that is not clear.
+=============================================================
+An ad-hoc collection of notes on IA64 MCA and INIT processing
+=============================================================
+
+Feel free to update it with notes about any area that is not clear.
 
 ---
 
@@ -82,7 +85,8 @@ if we have a choice here.
   own stack as running on that cpu.  Then a recursive error gets a
   trace of the failing handler's "task".
 
-[1] My (Keith Owens) original design called for ia64 to separate its
+[1]
+    My (Keith Owens) original design called for ia64 to separate its
     struct task and the kernel stacks.  Then the MCA/INIT data would be
     chained stacks like i386 interrupt stacks.  But that required
     radical surgery on the rest of ia64, plus extra hard wired TLB
diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.rst
index a63d2c54329b..1de70c305a79 100644
--- a/Documentation/ia64/serial.txt
+++ b/Documentation/ia64/serial.rst
@@ -1,4 +1,9 @@
-SERIAL DEVICE NAMING
+==============
+Serial Devices
+==============
+
+Serial Device Naming
+====================
 
     As of 2.6.10, serial devices on ia64 are named based on the
     order of ACPI and PCI enumeration.  The first device in the
@@ -30,17 +35,21 @@ SERIAL DEVICE NAMING
     (described in the ACPI namespace) plus an MP[2] (a PCI device) has
     these ports:
 
-                                  pre-2.6.10      pre-2.6.10
-                    MMIO         (EFI console    (EFI console
-                   address        on builtin)     on MP port)    2.6.10
-                  ==========      ==========      ==========     ======
+      ==========  ==========     ============    ============   =======
+      Type        MMIO           pre-2.6.10      pre-2.6.10     2.6.10+
+		  address
+				 (EFI console    (EFI console
+                                 on builtin)     on MP port)
+      ==========  ==========     ============    ============   =======
       builtin     0xff5e0000        ttyS0           ttyS1         ttyS0
       MP UPS      0xf8031000        ttyS1           ttyS2         ttyS1
       MP Console  0xf8030000        ttyS2           ttyS0         ttyS2
       MP 2        0xf8030010        ttyS3           ttyS3         ttyS3
       MP 3        0xf8030038        ttyS4           ttyS4         ttyS4
+      ==========  ==========     ============    ============   =======
 
-CONSOLE SELECTION
+Console Selection
+=================
 
     EFI knows what your console devices are, but it doesn't tell the
     kernel quite enough to actually locate them.  The DIG64 HCDP
@@ -67,7 +76,8 @@ CONSOLE SELECTION
     entries in /etc/inittab (for getty) and /etc/securetty (to allow
     root login).
 
-EARLY SERIAL CONSOLE
+Early Serial Console
+====================
 
     The kernel can't start using a serial console until it knows where
     the device lives.  Normally this happens when the driver enumerates
@@ -80,7 +90,8 @@ EARLY SERIAL CONSOLE
     or if the EFI console path contains only a UART device and the
     firmware supplies an HCDP.
 
-TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
+Troubleshooting Serial Console Problems
+=======================================
 
     No kernel output after elilo prints "Uncompressing Linux... done":
 
@@ -133,19 +144,22 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 
 
-[1] http://www.dig64.org/specifications/agreement 
+[1]
+    http://www.dig64.org/specifications/agreement
     The table was originally defined as the "HCDP" for "Headless
     Console/Debug Port."  The current version is the "PCDP" for
     "Primary Console and Debug Port Devices."
 
-[2] The HP MP (management processor) is a PCI device that provides
+[2]
+    The HP MP (management processor) is a PCI device that provides
     several UARTs.  One of the UARTs is often used as a console; the
     EFI Boot Manager identifies it as "Acpi(HWP0002,700)/Pci(...)/Uart".
     The external connection is usually a 25-pin connector, and a
     special dongle converts that to three 9-pin connectors, one of
     which is labelled "Console."
 
-[3] EFI console devices are configured using the EFI Boot Manager
+[3]
+    EFI console devices are configured using the EFI Boot Manager
     "Boot option maintenance" menu.  You may have to interrupt the
     boot sequence to use this menu, and you will have to reset the
     box after changing console configuration.
diff --git a/Documentation/ia64/xen.rst b/Documentation/ia64/xen.rst
new file mode 100644
index 000000000000..831339c74441
--- /dev/null
+++ b/Documentation/ia64/xen.rst
@@ -0,0 +1,206 @@
+********************************************************
+Recipe for getting/building/running Xen/ia64 with pv_ops
+********************************************************
+This recipe describes how to get xen-ia64 source and build it,
+and run domU with pv_ops.
+
+Requirements
+============
+
+  - python
+  - mercurial
+    it (aka "hg") is an open-source source code
+    management software. See the below.
+    http://www.selenic.com/mercurial/wiki/
+  - git
+  - bridge-utils
+
+Getting and Building Xen and Dom0
+=================================
+
+  My environment is:
+
+    - Machine  : Tiger4
+    - Domain0 OS  : RHEL5
+    - DomainU OS  : RHEL5
+
+ 1. Download source::
+
+	# hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
+	# cd xen-unstable.hg
+	# hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
+
+ 2. # make world
+
+ 3. # make install-tools
+
+ 4. copy kernels and xen::
+
+	# cp xen/xen.gz /boot/efi/efi/redhat/
+	# cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
+	/boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
+
+ 5. make initrd for Dom0/DomU::
+
+	# make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
+          O=$(pwd)/build-linux-2.6.18-xen_ia64
+	# mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
+	  2.6.18.8-xen --builtin mptspi --builtin mptbase \
+	  --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
+	  --builtin ehci-hcd
+
+Making a disk image for guest OS
+================================
+
+ 1. make file::
+
+      # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
+      # mke2fs -F -j /root/rhel5.img
+      # mount -o loop /root/rhel5.img /mnt
+      # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
+      # mkdir /mnt/{root,proc,sys,home,tmp}
+
+      Note: You may miss some device files. If so, please create them
+      with mknod. Or you can use tar instead of cp.
+
+ 2. modify DomU's fstab::
+
+      # vi /mnt/etc/fstab
+         /dev/xvda1  /            ext3    defaults        1 1
+         none        /dev/pts     devpts  gid=5,mode=620  0 0
+         none        /dev/shm     tmpfs   defaults        0 0
+         none        /proc        proc    defaults        0 0
+         none        /sys         sysfs   defaults        0 0
+
+ 3. modify inittab
+
+    set runlevel to 3 to avoid X trying to start::
+
+      # vi /mnt/etc/inittab
+         id:3:initdefault:
+
+    Start a getty on the hvc0 console::
+
+       X0:2345:respawn:/sbin/mingetty hvc0
+
+    tty1-6 mingetty can be commented out
+
+ 4. add hvc0 into /etc/securetty::
+
+      # vi /mnt/etc/securetty (add hvc0)
+
+ 5. umount::
+
+      # umount /mnt
+
+FYI, virt-manager can also make a disk image for guest OS.
+It's GUI tools and easy to make it.
+
+Boot Xen & Domain0
+==================
+
+ 1. replace elilo
+    elilo of RHEL5 can boot Xen and Dom0.
+    If you use old elilo (e.g RHEL4), please download from the below
+    http://elilo.sourceforge.net/cgi-bin/blosxom
+    and copy into /boot/efi/efi/redhat/::
+
+      # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
+
+ 2. modify elilo.conf (like the below)::
+
+      # vi /boot/efi/efi/redhat/elilo.conf
+      prompt
+      timeout=20
+      default=xen
+      relocatable
+
+      image=vmlinuz-2.6.18.8-xen
+             label=xen
+             vmm=xen.gz
+             initrd=initrd-2.6.18.8-xen.img
+             read-only
+             append=" -- rhgb root=/dev/sda2"
+
+The append options before "--" are for xen hypervisor,
+the options after "--" are for dom0.
+
+FYI, your machine may need console options like
+"com1=19200,8n1 console=vga,com1". For example,
+append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
+console=ttyS0 root=/dev/sda2"
+
+Getting and Building domU with pv_ops
+=====================================
+
+ 1. get pv_ops tree::
+
+      # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
+
+ 2. git branch (if necessary)::
+
+      # cd linux-2.6-xen-ia64/
+      # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
+
+   Note:
+     The current branch is xen-ia64-domu-minimal-2008may19.
+     But you would find the new branch. You can see with
+     "git branch -r" to get the branch lists.
+
+       http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
+
+     is also available.
+
+     The tree is based on
+
+      git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
+
+ 3. copy .config for pv_ops of domU::
+
+      # cp arch/ia64/configs/xen_domu_wip_defconfig .config
+
+ 4. make kernel with pv_ops::
+
+      # make oldconfig
+      # make
+
+ 5. install the kernel and initrd::
+
+      # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
+      # make modules_install
+      # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
+        2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
+        --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
+        --builtin ohci-hcd --builtin ehci-hcd
+
+Boot DomainU with pv_ops
+========================
+
+ 1. make config of DomU::
+
+     # vi /etc/xen/rhel5
+       kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
+       ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
+       vcpus = 1
+       memory = 512
+       name = "rhel5"
+       disk = [ 'file:/root/rhel5.img,xvda1,w' ]
+       root = "/dev/xvda1 ro"
+       extra= "rhgb console=hvc0"
+
+ 2. After boot xen and dom0, start xend::
+
+	# /etc/init.d/xend start
+
+   ( In the debugging case, `# XEND_DEBUG=1 xend trace_start` )
+
+ 3. start domU::
+
+	# xm create -c rhel5
+
+Reference
+=========
+- Wiki of Xen/IA64 upstream merge
+  http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
+
+Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt
deleted file mode 100644
index a12c74ce2773..000000000000
--- a/Documentation/ia64/xen.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-       Recipe for getting/building/running Xen/ia64 with pv_ops
-       --------------------------------------------------------
-
-This recipe describes how to get xen-ia64 source and build it,
-and run domU with pv_ops.
-
-============
-Requirements
-============
-
-  - python
-  - mercurial
-    it (aka "hg") is an open-source source code
-    management software. See the below.
-    http://www.selenic.com/mercurial/wiki/
-  - git
-  - bridge-utils
-
-=================================
-Getting and Building Xen and Dom0
-=================================
-
-  My environment is;
-    Machine  : Tiger4
-    Domain0 OS  : RHEL5
-    DomainU OS  : RHEL5
-
- 1. Download source
-    # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
-    # cd xen-unstable.hg
-    # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
-
- 2. # make world
-
- 3. # make install-tools
-
- 4. copy kernels and xen
-    # cp xen/xen.gz /boot/efi/efi/redhat/
-    # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
-      /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
-
- 5. make initrd for Dom0/DomU
-    # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
-      O=$(pwd)/build-linux-2.6.18-xen_ia64
-    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
-      2.6.18.8-xen --builtin mptspi --builtin mptbase \
-      --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
-      --builtin ehci-hcd
-
-================================
-Making a disk image for guest OS
-================================
-
- 1. make file
-    # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
-    # mke2fs -F -j /root/rhel5.img
-    # mount -o loop /root/rhel5.img /mnt
-    # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
-    # mkdir /mnt/{root,proc,sys,home,tmp}
-
-    Note: You may miss some device files. If so, please create them
-    with mknod. Or you can use tar instead of cp.
-
- 2. modify DomU's fstab
-    # vi /mnt/etc/fstab
-       /dev/xvda1  /            ext3    defaults        1 1
-       none        /dev/pts     devpts  gid=5,mode=620  0 0
-       none        /dev/shm     tmpfs   defaults        0 0
-       none        /proc        proc    defaults        0 0
-       none        /sys         sysfs   defaults        0 0
-
- 3. modify inittab
-    set runlevel to 3 to avoid X trying to start
-    # vi /mnt/etc/inittab
-       id:3:initdefault:
-    Start a getty on the hvc0 console
-       X0:2345:respawn:/sbin/mingetty hvc0
-    tty1-6 mingetty can be commented out
-
- 4. add hvc0 into /etc/securetty
-    # vi /mnt/etc/securetty (add hvc0)
-
- 5. umount
-    # umount /mnt
-
-FYI, virt-manager can also make a disk image for guest OS.
-It's GUI tools and easy to make it.
-
-==================
-Boot Xen & Domain0
-==================
-
- 1. replace elilo
-    elilo of RHEL5 can boot Xen and Dom0.
-    If you use old elilo (e.g RHEL4), please download from the below
-    http://elilo.sourceforge.net/cgi-bin/blosxom
-    and copy into /boot/efi/efi/redhat/
-    # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
-
- 2. modify elilo.conf (like the below)
-    # vi /boot/efi/efi/redhat/elilo.conf
-     prompt
-     timeout=20
-     default=xen
-     relocatable
-
-     image=vmlinuz-2.6.18.8-xen
-             label=xen
-             vmm=xen.gz
-             initrd=initrd-2.6.18.8-xen.img
-             read-only
-             append=" -- rhgb root=/dev/sda2"
-
-The append options before "--" are for xen hypervisor,
-the options after "--" are for dom0.
-
-FYI, your machine may need console options like
-"com1=19200,8n1 console=vga,com1". For example,
-append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
-console=ttyS0 root=/dev/sda2"
-
-=====================================
-Getting and Building domU with pv_ops
-=====================================
-
- 1. get pv_ops tree
-    # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
-
- 2. git branch (if necessary)
-    # cd linux-2.6-xen-ia64/
-    # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
-    (Note: The current branch is xen-ia64-domu-minimal-2008may19.
-    But you would find the new branch. You can see with
-    "git branch -r" to get the branch lists.
-    http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
-    is also available. The tree is based on
-    git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
-
-
- 3. copy .config for pv_ops of domU
-    # cp arch/ia64/configs/xen_domu_wip_defconfig .config
-
- 4. make kernel with pv_ops
-    # make oldconfig
-    # make
-
- 5. install the kernel and initrd
-    # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
-    # make modules_install
-    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
-      2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
-      --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
-      --builtin ohci-hcd --builtin ehci-hcd
-
-========================
-Boot DomainU with pv_ops
-========================
-
- 1. make config of DomU
-   # vi /etc/xen/rhel5
-     kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
-     ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
-     vcpus = 1
-     memory = 512
-     name = "rhel5"
-     disk = [ 'file:/root/rhel5.img,xvda1,w' ]
-     root = "/dev/xvda1 ro"
-     extra= "rhgb console=hvc0"
-
- 2. After boot xen and dom0, start xend
-   # /etc/init.d/xend start
-   ( In the debugging case, # XEND_DEBUG=1 xend trace_start )
-
- 3. start domU
-   # xm create -c rhel5
-
-=========
-Reference
-=========
-- Wiki of Xen/IA64 upstream merge
-  http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
-
-Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/Documentation/ide/index.rst b/Documentation/ide/index.rst
index 45bc12d3957f..813dfe611a31 100644
--- a/Documentation/ide/index.rst
+++ b/Documentation/ide/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ==================================
 Integrated Drive Electronics (IDE)
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 0593dca89a94..58b7a4ebac51 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ==============
 Industrial I/O
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 00a0fe4241a4..70ae148ec980 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -1,3 +1,4 @@
+
 .. The Linux Kernel documentation master file, created by
    sphinx-quickstart on Fri Feb 12 13:51:46 2016.
    You can adapt this file completely to your liking, but it should at least
@@ -34,6 +35,7 @@ trying to get it to work optimally on a given system.
    :maxdepth: 2
 
    admin-guide/index
+   kbuild/index
 
 Firmware-related documentation
 ------------------------------
@@ -55,6 +57,7 @@ the kernel interface as seen by application developers.
    :maxdepth: 2
 
    userspace-api/index
+   ioctl/index
 
 
 Introduction to kernel development
@@ -75,6 +78,9 @@ merged much easier.
    kernel-hacking/index
    trace/index
    maintainer/index
+   fault-injection/index
+   livepatch/index
+
 
 Kernel API documentation
 ------------------------
@@ -90,9 +96,24 @@ needed).
 
    driver-api/index
    core-api/index
+   locking/index
+   accounting/index
+   block/index
+   cdrom/index
+   ide/index
+   fb/index
+   fpga/index
+   hid/index
+   iio/index
    infiniband/index
+   leds/index
    media/index
+   netlabel/index
    networking/index
+   pcmcia/index
+   target/index
+   timers/index
+   watchdog/index
    input/index
    hwmon/index
    gpu/index
@@ -105,6 +126,8 @@ needed).
    usb/index
    PCI/index
    misc-devices/index
+   mic/index
+   scheduler/index
 
 Architecture-specific documentation
 -----------------------------------
@@ -116,7 +139,16 @@ implementation.
    :maxdepth: 2
 
    sh/index
+   arm/index
+   arm64/index
+   ia64/index
+   m68k/index
+   riscv/index
+   s390/index
+   sh/index
+   sparc/index
    x86/index
+   xtensa/index
 
 Filesystem Documentation
 ------------------------
diff --git a/Documentation/ioctl/botching-up-ioctls.txt b/Documentation/ioctl/botching-up-ioctls.rst
index 883fb034bd04..ac697fef3545 100644
--- a/Documentation/ioctl/botching-up-ioctls.txt
+++ b/Documentation/ioctl/botching-up-ioctls.rst
@@ -1,3 +1,4 @@
+=================================
 (How to avoid) Botching up ioctls
 =================================
 
diff --git a/Documentation/ioctl/cdrom.rst b/Documentation/ioctl/cdrom.rst
new file mode 100644
index 000000000000..3b4c0506de46
--- /dev/null
+++ b/Documentation/ioctl/cdrom.rst
@@ -0,0 +1,1233 @@
+============================
+Summary of CDROM ioctl calls
+============================
+
+- Edward A. Falk <efalk@google.com>
+
+November, 2004
+
+This document attempts to describe the ioctl(2) calls supported by
+the CDROM layer.  These are by-and-large implemented (as of Linux 2.6)
+in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c
+
+ioctl values are listed in <linux/cdrom.h>.  As of this writing, they
+are as follows:
+
+	======================	===============================================
+	CDROMPAUSE		Pause Audio Operation
+	CDROMRESUME		Resume paused Audio Operation
+	CDROMPLAYMSF		Play Audio MSF (struct cdrom_msf)
+	CDROMPLAYTRKIND		Play Audio Track/index (struct cdrom_ti)
+	CDROMREADTOCHDR		Read TOC header (struct cdrom_tochdr)
+	CDROMREADTOCENTRY	Read TOC entry (struct cdrom_tocentry)
+	CDROMSTOP		Stop the cdrom drive
+	CDROMSTART		Start the cdrom drive
+	CDROMEJECT		Ejects the cdrom media
+	CDROMVOLCTRL		Control output volume (struct cdrom_volctrl)
+	CDROMSUBCHNL		Read subchannel data (struct cdrom_subchnl)
+	CDROMREADMODE2		Read CDROM mode 2 data (2336 Bytes)
+				(struct cdrom_read)
+	CDROMREADMODE1		Read CDROM mode 1 data (2048 Bytes)
+				(struct cdrom_read)
+	CDROMREADAUDIO		(struct cdrom_read_audio)
+	CDROMEJECT_SW		enable(1)/disable(0) auto-ejecting
+	CDROMMULTISESSION	Obtain the start-of-last-session
+				address of multi session disks
+				(struct cdrom_multisession)
+	CDROM_GET_MCN		Obtain the "Universal Product Code"
+				if available (struct cdrom_mcn)
+	CDROM_GET_UPC		Deprecated, use CDROM_GET_MCN instead.
+	CDROMRESET		hard-reset the drive
+	CDROMVOLREAD		Get the drive's volume setting
+				(struct cdrom_volctrl)
+	CDROMREADRAW		read data in raw mode (2352 Bytes)
+				(struct cdrom_read)
+	CDROMREADCOOKED		read data in cooked mode
+	CDROMSEEK		seek msf address
+	CDROMPLAYBLK		scsi-cd only, (struct cdrom_blk)
+	CDROMREADALL		read all 2646 bytes
+	CDROMGETSPINDOWN	return 4-bit spindown value
+	CDROMSETSPINDOWN	set 4-bit spindown value
+	CDROMCLOSETRAY		pendant of CDROMEJECT
+	CDROM_SET_OPTIONS	Set behavior options
+	CDROM_CLEAR_OPTIONS	Clear behavior options
+	CDROM_SELECT_SPEED	Set the CD-ROM speed
+	CDROM_SELECT_DISC	Select disc (for juke-boxes)
+	CDROM_MEDIA_CHANGED	Check is media changed
+	CDROM_DRIVE_STATUS	Get tray position, etc.
+	CDROM_DISC_STATUS	Get disc type, etc.
+	CDROM_CHANGER_NSLOTS	Get number of slots
+	CDROM_LOCKDOOR		lock or unlock door
+	CDROM_DEBUG		Turn debug messages on/off
+	CDROM_GET_CAPABILITY	get capabilities
+	CDROMAUDIOBUFSIZ	set the audio buffer size
+	DVD_READ_STRUCT		Read structure
+	DVD_WRITE_STRUCT	Write structure
+	DVD_AUTH		Authentication
+	CDROM_SEND_PACKET	send a packet to the drive
+	CDROM_NEXT_WRITABLE	get next writable block
+	CDROM_LAST_WRITTEN	get last block written on disc
+	======================	===============================================
+
+
+The information that follows was determined from reading kernel source
+code.  It is likely that some corrections will be made over time.
+
+------------------------------------------------------------------------------
+
+General:
+
+	Unless otherwise specified, all ioctl calls return 0 on success
+	and -1 with errno set to an appropriate value on error.  (Some
+	ioctls return non-negative data values.)
+
+	Unless otherwise specified, all ioctl calls return -1 and set
+	errno to EFAULT on a failed attempt to copy data to or from user
+	address space.
+
+	Individual drivers may return error codes not listed here.
+
+	Unless otherwise specified, all data structures and constants
+	are defined in <linux/cdrom.h>
+
+------------------------------------------------------------------------------
+
+
+CDROMPAUSE
+	Pause Audio Operation
+
+
+	usage::
+
+	  ioctl(fd, CDROMPAUSE, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+CDROMRESUME
+	Resume paused Audio Operation
+
+
+	usage::
+
+	  ioctl(fd, CDROMRESUME, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+CDROMPLAYMSF
+	Play Audio MSF
+
+	(struct cdrom_msf)
+
+
+	usage::
+
+	  struct cdrom_msf msf;
+
+	  ioctl(fd, CDROMPLAYMSF, &msf);
+
+	inputs:
+		cdrom_msf structure, describing a segment of music to play
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+		- MSF stands for minutes-seconds-frames
+		- LBA stands for logical block address
+		- Segment is described as start and end times, where each time
+		  is described as minutes:seconds:frames.
+		  A frame is 1/75 of a second.
+
+
+CDROMPLAYTRKIND
+	Play Audio Track/index
+
+	(struct cdrom_ti)
+
+
+	usage::
+
+	  struct cdrom_ti ti;
+
+	  ioctl(fd, CDROMPLAYTRKIND, &ti);
+
+	inputs:
+		cdrom_ti structure, describing a segment of music to play
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+		- Segment is described as start and end times, where each time
+		  is described as a track and an index.
+
+
+
+CDROMREADTOCHDR
+	Read TOC header
+
+	(struct cdrom_tochdr)
+
+
+	usage::
+
+	  cdrom_tochdr header;
+
+	  ioctl(fd, CDROMREADTOCHDR, &header);
+
+	inputs:
+		cdrom_tochdr structure
+
+
+	outputs:
+		cdrom_tochdr structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMREADTOCENTRY
+	Read TOC entry
+
+	(struct cdrom_tocentry)
+
+
+	usage::
+
+	  struct cdrom_tocentry entry;
+
+	  ioctl(fd, CDROMREADTOCENTRY, &entry);
+
+	inputs:
+		cdrom_tocentry structure
+
+
+	outputs:
+		cdrom_tocentry structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+	  - EINVAL	entry.cdte_format not CDROM_MSF or CDROM_LBA
+	  - EINVAL	requested track out of bounds
+	  - EIO		I/O error reading TOC
+
+	notes:
+		- TOC stands for Table Of Contents
+		- MSF stands for minutes-seconds-frames
+		- LBA stands for logical block address
+
+
+
+CDROMSTOP
+	Stop the cdrom drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMSTOP, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+	  - Exact interpretation of this ioctl depends on the device,
+	    but most seem to spin the drive down.
+
+
+CDROMSTART
+	Start the cdrom drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMSTART, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+	  - Exact interpretation of this ioctl depends on the device,
+	    but most seem to spin the drive up and/or close the tray.
+	    Other devices ignore the ioctl completely.
+
+
+CDROMEJECT
+	- Ejects the cdrom media
+
+
+	usage::
+
+	  ioctl(fd, CDROMEJECT, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - ENOSYS	cd drive not capable of ejecting
+	  - EBUSY	other processes are accessing drive, or door is locked
+
+	notes:
+		- See CDROM_LOCKDOOR, below.
+
+
+
+
+CDROMCLOSETRAY
+	pendant of CDROMEJECT
+
+
+	usage::
+
+	  ioctl(fd, CDROMCLOSETRAY, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - ENOSYS	cd drive not capable of closing the tray
+	  - EBUSY	other processes are accessing drive, or door is locked
+
+	notes:
+		- See CDROM_LOCKDOOR, below.
+
+
+
+
+CDROMVOLCTRL
+	Control output volume (struct cdrom_volctrl)
+
+
+	usage::
+
+	  struct cdrom_volctrl volume;
+
+	  ioctl(fd, CDROMVOLCTRL, &volume);
+
+	inputs:
+		cdrom_volctrl structure containing volumes for up to 4
+		channels.
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMVOLREAD
+	Get the drive's volume setting
+
+	(struct cdrom_volctrl)
+
+
+	usage::
+
+	  struct cdrom_volctrl volume;
+
+	  ioctl(fd, CDROMVOLREAD, &volume);
+
+	inputs:
+		none
+
+
+	outputs:
+		The current volume settings.
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMSUBCHNL
+	Read subchannel data
+
+	(struct cdrom_subchnl)
+
+
+	usage::
+
+	  struct cdrom_subchnl q;
+
+	  ioctl(fd, CDROMSUBCHNL, &q);
+
+	inputs:
+		cdrom_subchnl structure
+
+
+	outputs:
+		cdrom_subchnl structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+
+	notes:
+		- Format is converted to CDROM_MSF or CDROM_LBA
+		  as per user request on return
+
+
+
+CDROMREADRAW
+	read data in raw mode (2352 Bytes)
+
+	(struct cdrom_read)
+
+	usage::
+
+	  union {
+
+	    struct cdrom_msf msf;		/* input */
+	    char buffer[CD_FRAMESIZE_RAW];	/* return */
+	  } arg;
+	  ioctl(fd, CDROMREADRAW, &arg);
+
+	inputs:
+		cdrom_msf structure indicating an address to read.
+
+		Only the start values are significant.
+
+	outputs:
+		Data written to address provided by user.
+
+
+	error return:
+	  - EINVAL	address less than 0, or msf less than 0:2:0
+	  - ENOMEM	out of memory
+
+	notes:
+		- As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this
+		  ioctl accepts a cdrom_read structure, but actual source code
+		  reads a cdrom_msf structure and writes a buffer of data to
+		  the same address.
+
+		- MSF values are converted to LBA values via this formula::
+
+		    lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+
+
+
+
+CDROMREADMODE1
+	Read CDROM mode 1 data (2048 Bytes)
+
+	(struct cdrom_read)
+
+	notes:
+		Identical to CDROMREADRAW except that block size is
+		CD_FRAMESIZE (2048) bytes
+
+
+
+CDROMREADMODE2
+	Read CDROM mode 2 data (2336 Bytes)
+
+	(struct cdrom_read)
+
+	notes:
+		Identical to CDROMREADRAW except that block size is
+		CD_FRAMESIZE_RAW0 (2336) bytes
+
+
+
+CDROMREADAUDIO
+	(struct cdrom_read_audio)
+
+	usage::
+
+	  struct cdrom_read_audio ra;
+
+	  ioctl(fd, CDROMREADAUDIO, &ra);
+
+	inputs:
+		cdrom_read_audio structure containing read start
+		point and length
+
+	outputs:
+		audio data, returned to buffer indicated by ra
+
+
+	error return:
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+	  - EINVAL	nframes not in range [1 75]
+	  - ENXIO	drive has no queue (probably means invalid fd)
+	  - ENOMEM	out of memory
+
+
+CDROMEJECT_SW
+	enable(1)/disable(0) auto-ejecting
+
+
+	usage::
+
+	  int val;
+
+	  ioctl(fd, CDROMEJECT_SW, val);
+
+	inputs:
+		Flag specifying auto-eject flag.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	Drive is not capable of ejecting.
+	  - EBUSY	Door is locked
+
+
+
+
+CDROMMULTISESSION
+	Obtain the start-of-last-session address of multi session disks
+
+	(struct cdrom_multisession)
+
+	usage::
+
+	  struct cdrom_multisession ms_info;
+
+	  ioctl(fd, CDROMMULTISESSION, &ms_info);
+
+	inputs:
+		cdrom_multisession structure containing desired
+
+	  format.
+
+	outputs:
+		cdrom_multisession structure is filled with last_session
+		information.
+
+	error return:
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+
+
+CDROM_GET_MCN
+	Obtain the "Universal Product Code"
+	if available
+
+	(struct cdrom_mcn)
+
+
+	usage::
+
+	  struct cdrom_mcn mcn;
+
+	  ioctl(fd, CDROM_GET_MCN, &mcn);
+
+	inputs:
+		none
+
+
+	outputs:
+		Universal Product Code
+
+
+	error return:
+	  - ENOSYS	Drive is not capable of reading MCN data.
+
+	notes:
+		- Source code comments state::
+
+		    The following function is implemented, although very few
+		    audio discs give Universal Product Code information, which
+		    should just be the Medium Catalog Number on the box.  Note,
+		    that the way the code is written on the CD is /not/ uniform
+		    across all discs!
+
+
+
+
+CDROM_GET_UPC
+	CDROM_GET_MCN  (deprecated)
+
+
+	Not implemented, as of 2.6.8.1
+
+
+
+CDROMRESET
+	hard-reset the drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMRESET, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - ENOSYS	Drive is not capable of resetting.
+
+
+
+
+CDROMREADCOOKED
+	read data in cooked mode
+
+
+	usage::
+
+	  u8 buffer[CD_FRAMESIZE]
+
+	  ioctl(fd, CDROMREADCOOKED, buffer);
+
+	inputs:
+		none
+
+
+	outputs:
+		2048 bytes of data, "cooked" mode.
+
+
+	notes:
+		Not implemented on all drives.
+
+
+
+
+
+CDROMREADALL
+	read all 2646 bytes
+
+
+	Same as CDROMREADCOOKED, but reads 2646 bytes.
+
+
+
+CDROMSEEK
+	seek msf address
+
+
+	usage::
+
+	  struct cdrom_msf msf;
+
+	  ioctl(fd, CDROMSEEK, &msf);
+
+	inputs:
+		MSF address to seek to.
+
+
+	outputs:
+		none
+
+
+
+
+CDROMPLAYBLK
+	scsi-cd only
+
+	(struct cdrom_blk)
+
+
+	usage::
+
+	  struct cdrom_blk blk;
+
+	  ioctl(fd, CDROMPLAYBLK, &blk);
+
+	inputs:
+		Region to play
+
+
+	outputs:
+		none
+
+
+
+
+CDROMGETSPINDOWN
+	usage::
+
+	  char spindown;
+
+	  ioctl(fd, CDROMGETSPINDOWN, &spindown);
+
+	inputs:
+		none
+
+
+	outputs:
+		The value of the current 4-bit spindown value.
+
+
+
+
+
+CDROMSETSPINDOWN
+	usage::
+
+	  char spindown
+
+	  ioctl(fd, CDROMSETSPINDOWN, &spindown);
+
+	inputs:
+		4-bit value used to control spindown (TODO: more detail here)
+
+
+	outputs:
+		none
+
+
+
+
+
+
+CDROM_SET_OPTIONS
+	Set behavior options
+
+
+	usage::
+
+	  int options;
+
+	  ioctl(fd, CDROM_SET_OPTIONS, options);
+
+	inputs:
+		New values for drive options.  The logical 'or' of:
+
+	    ==============      ==================================
+	    CDO_AUTO_CLOSE	close tray on first open(2)
+	    CDO_AUTO_EJECT	open tray on last release
+	    CDO_USE_FFLAGS	use O_NONBLOCK information on open
+	    CDO_LOCK		lock tray on open files
+	    CDO_CHECK_TYPE	check type on open for data
+	    ==============      ==================================
+
+	outputs:
+		Returns the resulting options settings in the
+		ioctl return value.  Returns -1 on error.
+
+	error return:
+	  - ENOSYS	selected option(s) not supported by drive.
+
+
+
+
+CDROM_CLEAR_OPTIONS
+	Clear behavior options
+
+
+	Same as CDROM_SET_OPTIONS, except that selected options are
+	turned off.
+
+
+
+CDROM_SELECT_SPEED
+	Set the CD-ROM speed
+
+
+	usage::
+
+	  int speed;
+
+	  ioctl(fd, CDROM_SELECT_SPEED, speed);
+
+	inputs:
+		New drive speed.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	speed selection not supported by drive.
+
+
+
+CDROM_SELECT_DISC
+	Select disc (for juke-boxes)
+
+
+	usage::
+
+	  int disk;
+
+	  ioctl(fd, CDROM_SELECT_DISC, disk);
+
+	inputs:
+		Disk to load into drive.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - EINVAL	Disk number beyond capacity of drive
+
+
+
+CDROM_MEDIA_CHANGED
+	Check is media changed
+
+
+	usage::
+
+	  int slot;
+
+	  ioctl(fd, CDROM_MEDIA_CHANGED, slot);
+
+	inputs:
+		Slot number to be tested, always zero except for jukeboxes.
+
+		May also be special values CDSL_NONE or CDSL_CURRENT
+
+	outputs:
+		Ioctl return value is 0 or 1 depending on whether the media
+
+	  has been changed, or -1 on error.
+
+	error returns:
+	  - ENOSYS	Drive can't detect media change
+	  - EINVAL	Slot number beyond capacity of drive
+	  - ENOMEM	Out of memory
+
+
+
+CDROM_DRIVE_STATUS
+	Get tray position, etc.
+
+
+	usage::
+
+	  int slot;
+
+	  ioctl(fd, CDROM_DRIVE_STATUS, slot);
+
+	inputs:
+		Slot number to be tested, always zero except for jukeboxes.
+
+		May also be special values CDSL_NONE or CDSL_CURRENT
+
+	outputs:
+		Ioctl return value will be one of the following values
+
+	  from <linux/cdrom.h>:
+
+	    =================== ==========================
+	    CDS_NO_INFO		Information not available.
+	    CDS_NO_DISC
+	    CDS_TRAY_OPEN
+	    CDS_DRIVE_NOT_READY
+	    CDS_DISC_OK
+	    -1			error
+	    =================== ==========================
+
+	error returns:
+	  - ENOSYS	Drive can't detect drive status
+	  - EINVAL	Slot number beyond capacity of drive
+	  - ENOMEM	Out of memory
+
+
+
+
+CDROM_DISC_STATUS
+	Get disc type, etc.
+
+
+	usage::
+
+	  ioctl(fd, CDROM_DISC_STATUS, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		Ioctl return value will be one of the following values
+
+	  from <linux/cdrom.h>:
+
+	    - CDS_NO_INFO
+	    - CDS_AUDIO
+	    - CDS_MIXED
+	    - CDS_XA_2_2
+	    - CDS_XA_2_1
+	    - CDS_DATA_1
+
+	error returns:
+		none at present
+
+	notes:
+	    - Source code comments state::
+
+
+		Ok, this is where problems start.  The current interface for
+		the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
+		assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
+		Unfortunately, while this is often the case, it is also
+		very common for CDs to have some tracks with data, and some
+		tracks with audio.	Just because I feel like it, I declare
+		the following to be the best way to cope.  If the CD has
+		ANY data tracks on it, it will be returned as a data CD.
+		If it has any XA tracks, I will return it as that.	Now I
+		could simplify this interface by combining these returns with
+		the above, but this more clearly demonstrates the problem
+		with the current interface.  Too bad this wasn't designed
+		to use bitmasks...	       -Erik
+
+		Well, now we have the option CDS_MIXED: a mixed-type CD.
+		User level programmers might feel the ioctl is not very
+		useful.
+				---david
+
+
+
+
+CDROM_CHANGER_NSLOTS
+	Get number of slots
+
+
+	usage::
+
+	  ioctl(fd, CDROM_CHANGER_NSLOTS, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		The ioctl return value will be the number of slots in a
+		CD changer.  Typically 1 for non-multi-disk devices.
+
+	error returns:
+		none
+
+
+
+CDROM_LOCKDOOR
+	lock or unlock door
+
+
+	usage::
+
+	  int lock;
+
+	  ioctl(fd, CDROM_LOCKDOOR, lock);
+
+	inputs:
+		Door lock flag, 1=lock, 0=unlock
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - EDRIVE_CANT_DO_THIS
+
+				Door lock function not supported.
+	  - EBUSY
+
+				Attempt to unlock when multiple users
+				have the drive open and not CAP_SYS_ADMIN
+
+	notes:
+		As of 2.6.8.1, the lock flag is a global lock, meaning that
+		all CD drives will be locked or unlocked together.  This is
+		probably a bug.
+
+		The EDRIVE_CANT_DO_THIS value is defined in <linux/cdrom.h>
+		and is currently (2.6.8.1) the same as EOPNOTSUPP
+
+
+
+CDROM_DEBUG
+	Turn debug messages on/off
+
+
+	usage::
+
+	  int debug;
+
+	  ioctl(fd, CDROM_DEBUG, debug);
+
+	inputs:
+		Cdrom debug flag, 0=disable, 1=enable
+
+
+	outputs:
+		The ioctl return value will be the new debug flag.
+
+
+	error return:
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+
+
+
+CDROM_GET_CAPABILITY
+	get capabilities
+
+
+	usage::
+
+	  ioctl(fd, CDROM_GET_CAPABILITY, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		The ioctl return value is the current device capability
+		flags.  See CDC_CLOSE_TRAY, CDC_OPEN_TRAY, etc.
+
+
+
+CDROMAUDIOBUFSIZ
+	set the audio buffer size
+
+
+	usage::
+
+	  int arg;
+
+	  ioctl(fd, CDROMAUDIOBUFSIZ, val);
+
+	inputs:
+		New audio buffer size
+
+
+	outputs:
+		The ioctl return value is the new audio buffer size, or -1
+		on error.
+
+	error return:
+	  - ENOSYS	Not supported by this driver.
+
+	notes:
+		Not supported by all drivers.
+
+
+
+
+DVD_READ_STRUCT			Read structure
+
+	usage::
+
+	  dvd_struct s;
+
+	  ioctl(fd, DVD_READ_STRUCT, &s);
+
+	inputs:
+		dvd_struct structure, containing:
+
+	    =================== ==========================================
+	    type		specifies the information desired, one of
+				DVD_STRUCT_PHYSICAL, DVD_STRUCT_COPYRIGHT,
+				DVD_STRUCT_DISCKEY, DVD_STRUCT_BCA,
+				DVD_STRUCT_MANUFACT
+	    physical.layer_num	desired layer, indexed from 0
+	    copyright.layer_num	desired layer, indexed from 0
+	    disckey.agid
+	    =================== ==========================================
+
+	outputs:
+		dvd_struct structure, containing:
+
+	    =================== ================================
+	    physical		for type == DVD_STRUCT_PHYSICAL
+	    copyright		for type == DVD_STRUCT_COPYRIGHT
+	    disckey.value	for type == DVD_STRUCT_DISCKEY
+	    bca.{len,value}	for type == DVD_STRUCT_BCA
+	    manufact.{len,valu}	for type == DVD_STRUCT_MANUFACT
+	    =================== ================================
+
+	error returns:
+	  - EINVAL	physical.layer_num exceeds number of layers
+	  - EIO		Received invalid response from drive
+
+
+
+DVD_WRITE_STRUCT		Write structure
+
+	Not implemented, as of 2.6.8.1
+
+
+
+DVD_AUTH			Authentication
+
+	usage::
+
+	  dvd_authinfo ai;
+
+	  ioctl(fd, DVD_AUTH, &ai);
+
+	inputs:
+		dvd_authinfo structure.  See <linux/cdrom.h>
+
+
+	outputs:
+		dvd_authinfo structure.
+
+
+	error return:
+	  - ENOTTY	ai.type not recognized.
+
+
+
+CDROM_SEND_PACKET
+	send a packet to the drive
+
+
+	usage::
+
+	  struct cdrom_generic_command cgc;
+
+	  ioctl(fd, CDROM_SEND_PACKET, &cgc);
+
+	inputs:
+		cdrom_generic_command structure containing the packet to send.
+
+
+	outputs:
+		none
+
+	  cdrom_generic_command structure containing results.
+
+	error return:
+	  - EIO
+
+			command failed.
+	  - EPERM
+
+			Operation not permitted, either because a
+			write command was attempted on a drive which
+			is opened read-only, or because the command
+			requires CAP_SYS_RAWIO
+	  - EINVAL
+
+			cgc.data_direction not set
+
+
+
+CDROM_NEXT_WRITABLE
+	get next writable block
+
+
+	usage::
+
+	  long next;
+
+	  ioctl(fd, CDROM_NEXT_WRITABLE, &next);
+
+	inputs:
+		none
+
+
+	outputs:
+		The next writable block.
+
+
+	notes:
+		If the device does not support this ioctl directly, the
+
+	  ioctl will return CDROM_LAST_WRITTEN + 7.
+
+
+
+CDROM_LAST_WRITTEN
+	get last block written on disc
+
+
+	usage::
+
+	  long last;
+
+	  ioctl(fd, CDROM_LAST_WRITTEN, &last);
+
+	inputs:
+		none
+
+
+	outputs:
+		The last block written on disc
+
+
+	notes:
+		If the device does not support this ioctl directly, the
+		result is derived from the disc's table of contents.  If the
+		table of contents can't be read, this ioctl returns an
+		error.
diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt
deleted file mode 100644
index a4d62a9d6771..000000000000
--- a/Documentation/ioctl/cdrom.txt
+++ /dev/null
@@ -1,967 +0,0 @@
-		Summary of CDROM ioctl calls.
-		============================
-
-		Edward A. Falk <efalk@google.com>
-
-		November, 2004
-
-This document attempts to describe the ioctl(2) calls supported by
-the CDROM layer.  These are by-and-large implemented (as of Linux 2.6)
-in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c
-
-ioctl values are listed in <linux/cdrom.h>.  As of this writing, they
-are as follows:
-
-	CDROMPAUSE		Pause Audio Operation
-	CDROMRESUME		Resume paused Audio Operation
-	CDROMPLAYMSF		Play Audio MSF (struct cdrom_msf)
-	CDROMPLAYTRKIND		Play Audio Track/index (struct cdrom_ti)
-	CDROMREADTOCHDR		Read TOC header (struct cdrom_tochdr)
-	CDROMREADTOCENTRY	Read TOC entry (struct cdrom_tocentry)
-	CDROMSTOP		Stop the cdrom drive
-	CDROMSTART		Start the cdrom drive
-	CDROMEJECT		Ejects the cdrom media
-	CDROMVOLCTRL		Control output volume (struct cdrom_volctrl)
-	CDROMSUBCHNL		Read subchannel data (struct cdrom_subchnl)
-	CDROMREADMODE2		Read CDROM mode 2 data (2336 Bytes)
-					   (struct cdrom_read)
-	CDROMREADMODE1		Read CDROM mode 1 data (2048 Bytes)
-					   (struct cdrom_read)
-	CDROMREADAUDIO		(struct cdrom_read_audio)
-	CDROMEJECT_SW		enable(1)/disable(0) auto-ejecting
-	CDROMMULTISESSION	Obtain the start-of-last-session
-				  address of multi session disks
-				  (struct cdrom_multisession)
-	CDROM_GET_MCN		Obtain the "Universal Product Code"
-				   if available (struct cdrom_mcn)
-	CDROM_GET_UPC		Deprecated, use CDROM_GET_MCN instead.
-	CDROMRESET		hard-reset the drive
-	CDROMVOLREAD		Get the drive's volume setting
-					  (struct cdrom_volctrl)
-	CDROMREADRAW		read data in raw mode (2352 Bytes)
-					   (struct cdrom_read)
-	CDROMREADCOOKED		read data in cooked mode
-	CDROMSEEK		seek msf address
-	CDROMPLAYBLK		scsi-cd only, (struct cdrom_blk)
-	CDROMREADALL		read all 2646 bytes
-	CDROMGETSPINDOWN	return 4-bit spindown value
-	CDROMSETSPINDOWN	set 4-bit spindown value
-	CDROMCLOSETRAY		pendant of CDROMEJECT
-	CDROM_SET_OPTIONS	Set behavior options
-	CDROM_CLEAR_OPTIONS	Clear behavior options
-	CDROM_SELECT_SPEED	Set the CD-ROM speed
-	CDROM_SELECT_DISC	Select disc (for juke-boxes)
-	CDROM_MEDIA_CHANGED	Check is media changed
-	CDROM_DRIVE_STATUS	Get tray position, etc.
-	CDROM_DISC_STATUS	Get disc type, etc.
-	CDROM_CHANGER_NSLOTS	Get number of slots
-	CDROM_LOCKDOOR		lock or unlock door
-	CDROM_DEBUG		Turn debug messages on/off
-	CDROM_GET_CAPABILITY	get capabilities
-	CDROMAUDIOBUFSIZ	set the audio buffer size
-	DVD_READ_STRUCT		Read structure
-	DVD_WRITE_STRUCT	Write structure
-	DVD_AUTH		Authentication
-	CDROM_SEND_PACKET	send a packet to the drive
-	CDROM_NEXT_WRITABLE	get next writable block
-	CDROM_LAST_WRITTEN	get last block written on disc
-
-
-The information that follows was determined from reading kernel source
-code.  It is likely that some corrections will be made over time.
-
-
-
-
-
-
-
-General:
-
-	Unless otherwise specified, all ioctl calls return 0 on success
-	and -1 with errno set to an appropriate value on error.  (Some
-	ioctls return non-negative data values.)
-
-	Unless otherwise specified, all ioctl calls return -1 and set
-	errno to EFAULT on a failed attempt to copy data to or from user
-	address space.
-
-	Individual drivers may return error codes not listed here.
-
-	Unless otherwise specified, all data structures and constants
-	are defined in <linux/cdrom.h>
-
-
-
-
-CDROMPAUSE			Pause Audio Operation
-
-	usage:
-
-	  ioctl(fd, CDROMPAUSE, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-CDROMRESUME			Resume paused Audio Operation
-
-	usage:
-
-	  ioctl(fd, CDROMRESUME, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-CDROMPLAYMSF			Play Audio MSF (struct cdrom_msf)
-
-	usage:
-
-	  struct cdrom_msf msf;
-	  ioctl(fd, CDROMPLAYMSF, &msf);
-
-	inputs:
-	  cdrom_msf structure, describing a segment of music to play
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  MSF stands for minutes-seconds-frames
-	  LBA stands for logical block address
-
-	  Segment is described as start and end times, where each time
-	  is described as minutes:seconds:frames.  A frame is 1/75 of
-	  a second.
-
-
-CDROMPLAYTRKIND			Play Audio Track/index (struct cdrom_ti)
-
-	usage:
-
-	  struct cdrom_ti ti;
-	  ioctl(fd, CDROMPLAYTRKIND, &ti);
-
-	inputs:
-	  cdrom_ti structure, describing a segment of music to play
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Segment is described as start and end times, where each time
-	  is described as a track and an index.
-
-
-
-CDROMREADTOCHDR			Read TOC header (struct cdrom_tochdr)
-
-	usage:
-
-	  cdrom_tochdr header;
-	  ioctl(fd, CDROMREADTOCHDR, &header);
-
-	inputs:
-	  cdrom_tochdr structure
-
-	outputs:
-	  cdrom_tochdr structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMREADTOCENTRY		Read TOC entry (struct cdrom_tocentry)
-
-	usage:
-
-	  struct cdrom_tocentry entry;
-	  ioctl(fd, CDROMREADTOCENTRY, &entry);
-
-	inputs:
-	  cdrom_tocentry structure
-
-	outputs:
-	  cdrom_tocentry structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-	  EINVAL	entry.cdte_format not CDROM_MSF or CDROM_LBA
-	  EINVAL	requested track out of bounds
-	  EIO		I/O error reading TOC
-
-	notes:
-	  TOC stands for Table Of Contents
-	  MSF stands for minutes-seconds-frames
-	  LBA stands for logical block address
-
-
-
-CDROMSTOP			Stop the cdrom drive
-
-	usage:
-
-	  ioctl(fd, CDROMSTOP, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Exact interpretation of this ioctl depends on the device,
-	  but most seem to spin the drive down.
-
-
-CDROMSTART			Start the cdrom drive
-
-	usage:
-
-	  ioctl(fd, CDROMSTART, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Exact interpretation of this ioctl depends on the device,
-	  but most seem to spin the drive up and/or close the tray.
-	  Other devices ignore the ioctl completely.
-
-
-CDROMEJECT			Ejects the cdrom media
-
-	usage:
-
-	  ioctl(fd, CDROMEJECT, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error returns:
-	  ENOSYS	cd drive not capable of ejecting
-	  EBUSY		other processes are accessing drive, or door is locked
-
-	notes:
-	  See CDROM_LOCKDOOR, below.
-
-
-
-CDROMCLOSETRAY			pendant of CDROMEJECT
-
-	usage:
-
-	  ioctl(fd, CDROMCLOSETRAY, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error returns:
-	  ENOSYS	cd drive not capable of closing the tray
-	  EBUSY		other processes are accessing drive, or door is locked
-
-	notes:
-	  See CDROM_LOCKDOOR, below.
-
-
-
-CDROMVOLCTRL			Control output volume (struct cdrom_volctrl)
-
-	usage:
-
-	  struct cdrom_volctrl volume;
-	  ioctl(fd, CDROMVOLCTRL, &volume);
-
-	inputs:
-	  cdrom_volctrl structure containing volumes for up to 4
-	  channels.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMVOLREAD			Get the drive's volume setting
-					  (struct cdrom_volctrl)
-
-	usage:
-
-	  struct cdrom_volctrl volume;
-	  ioctl(fd, CDROMVOLREAD, &volume);
-
-	inputs:		none
-
-	outputs:
-	  The current volume settings.
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMSUBCHNL			Read subchannel data (struct cdrom_subchnl)
-
-	usage:
-
-	  struct cdrom_subchnl q;
-	  ioctl(fd, CDROMSUBCHNL, &q);
-
-	inputs:
-	  cdrom_subchnl structure
-
-	outputs:
-	  cdrom_subchnl structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-
-	notes:
-	  Format is converted to CDROM_MSF or CDROM_LBA
-	  as per user request on return
-
-
-
-CDROMREADRAW			read data in raw mode (2352 Bytes)
-					   (struct cdrom_read)
-
-	usage:
-
-	  union {
-	    struct cdrom_msf msf;		/* input */
-	    char buffer[CD_FRAMESIZE_RAW];	/* return */
-	  } arg;
-	  ioctl(fd, CDROMREADRAW, &arg);
-
-	inputs:
-	  cdrom_msf structure indicating an address to read.
-	  Only the start values are significant.
-
-	outputs:
-	  Data written to address provided by user.
-
-	error return:
-	  EINVAL	address less than 0, or msf less than 0:2:0
-	  ENOMEM	out of memory
-
-	notes:
-	  As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this
-	  ioctl accepts a cdrom_read structure, but actual source code
-	  reads a cdrom_msf structure and writes a buffer of data to
-	  the same address.
-
-	  MSF values are converted to LBA values via this formula:
-
-	    lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
-
-
-
-
-CDROMREADMODE1			Read CDROM mode 1 data (2048 Bytes)
-					   (struct cdrom_read)
-
-	notes:
-	  Identical to CDROMREADRAW except that block size is
-	  CD_FRAMESIZE (2048) bytes
-
-
-
-CDROMREADMODE2			Read CDROM mode 2 data (2336 Bytes)
-					   (struct cdrom_read)
-
-	notes:
-	  Identical to CDROMREADRAW except that block size is
-	  CD_FRAMESIZE_RAW0 (2336) bytes
-
-
-
-CDROMREADAUDIO			(struct cdrom_read_audio)
-
-	usage:
-
-	  struct cdrom_read_audio ra;
-	  ioctl(fd, CDROMREADAUDIO, &ra);
-
-	inputs:
-	  cdrom_read_audio structure containing read start
-	  point and length
-
-	outputs:
-	  audio data, returned to buffer indicated by ra
-
-	error return:
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-	  EINVAL	nframes not in range [1 75]
-	  ENXIO		drive has no queue (probably means invalid fd)
-	  ENOMEM	out of memory
-
-
-CDROMEJECT_SW			enable(1)/disable(0) auto-ejecting
-
-	usage:
-
-	  int val;
-	  ioctl(fd, CDROMEJECT_SW, val);
-
-	inputs:
-	  Flag specifying auto-eject flag.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	Drive is not capable of ejecting.
-	  EBUSY		Door is locked
-
-
-
-
-CDROMMULTISESSION		Obtain the start-of-last-session
-				  address of multi session disks
-				  (struct cdrom_multisession)
-	usage:
-
-	  struct cdrom_multisession ms_info;
-	  ioctl(fd, CDROMMULTISESSION, &ms_info);
-
-	inputs:
-	  cdrom_multisession structure containing desired
-	  format.
-
-	outputs:
-	  cdrom_multisession structure is filled with last_session
-	  information.
-
-	error return:
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-
-
-CDROM_GET_MCN			Obtain the "Universal Product Code"
-				   if available (struct cdrom_mcn)
-
-	usage:
-
-	  struct cdrom_mcn mcn;
-	  ioctl(fd, CDROM_GET_MCN, &mcn);
-
-	inputs:		none
-
-	outputs:
-	  Universal Product Code
-
-	error return:
-	  ENOSYS	Drive is not capable of reading MCN data.
-
-	notes:
-	  Source code comments state:
-
-	    The following function is implemented, although very few
-	    audio discs give Universal Product Code information, which
-	    should just be the Medium Catalog Number on the box.  Note,
-	    that the way the code is written on the CD is /not/ uniform
-	    across all discs!
-
-
-
-
-CDROM_GET_UPC			CDROM_GET_MCN  (deprecated)
-
-	Not implemented, as of 2.6.8.1
-
-
-
-CDROMRESET			hard-reset the drive
-
-	usage:
-
-	  ioctl(fd, CDROMRESET, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  ENOSYS	Drive is not capable of resetting.
-
-
-
-
-CDROMREADCOOKED			read data in cooked mode
-
-	usage:
-
-	  u8 buffer[CD_FRAMESIZE]
-	  ioctl(fd, CDROMREADCOOKED, buffer);
-
-	inputs:		none
-
-	outputs:
-	  2048 bytes of data, "cooked" mode.
-
-	notes:
-	  Not implemented on all drives.
-
-
-
-
-CDROMREADALL			read all 2646 bytes
-
-	Same as CDROMREADCOOKED, but reads 2646 bytes.
-
-
-
-CDROMSEEK			seek msf address
-
-	usage:
-
-	  struct cdrom_msf msf;
-	  ioctl(fd, CDROMSEEK, &msf);
-
-	inputs:
-	  MSF address to seek to.
-
-	outputs:	none
-
-
-
-CDROMPLAYBLK			scsi-cd only, (struct cdrom_blk)
-
-	usage:
-
-	  struct cdrom_blk blk;
-	  ioctl(fd, CDROMPLAYBLK, &blk);
-
-	inputs:
-	  Region to play
-
-	outputs:	none
-
-
-
-CDROMGETSPINDOWN
-
-	usage:
-
-	  char spindown;
-	  ioctl(fd, CDROMGETSPINDOWN, &spindown);
-
-	inputs:		none
-
-	outputs:
-	  The value of the current 4-bit spindown value.
-
-
-
-
-CDROMSETSPINDOWN
-
-	usage:
-
-	  char spindown
-	  ioctl(fd, CDROMSETSPINDOWN, &spindown);
-
-	inputs:
-	  4-bit value used to control spindown (TODO: more detail here)
-
-	outputs:	none
-
-
-
-
-
-CDROM_SET_OPTIONS		Set behavior options
-
-	usage:
-
-	  int options;
-	  ioctl(fd, CDROM_SET_OPTIONS, options);
-
-	inputs:
-	  New values for drive options.  The logical 'or' of:
-	    CDO_AUTO_CLOSE	close tray on first open(2)
-	    CDO_AUTO_EJECT	open tray on last release
-	    CDO_USE_FFLAGS	use O_NONBLOCK information on open
-	    CDO_LOCK		lock tray on open files
-	    CDO_CHECK_TYPE	check type on open for data
-
-	outputs:
-	  Returns the resulting options settings in the
-	  ioctl return value.  Returns -1 on error.
-
-	error return:
-	  ENOSYS	selected option(s) not supported by drive.
-
-
-
-
-CDROM_CLEAR_OPTIONS		Clear behavior options
-
-	Same as CDROM_SET_OPTIONS, except that selected options are
-	turned off.
-
-
-
-CDROM_SELECT_SPEED		Set the CD-ROM speed
-
-	usage:
-
-	  int speed;
-	  ioctl(fd, CDROM_SELECT_SPEED, speed);
-
-	inputs:
-	  New drive speed.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	speed selection not supported by drive.
-
-
-
-CDROM_SELECT_DISC		Select disc (for juke-boxes)
-
-	usage:
-
-	  int disk;
-	  ioctl(fd, CDROM_SELECT_DISC, disk);
-
-	inputs:
-	  Disk to load into drive.
-
-	outputs:	none
-
-	error return:
-	  EINVAL	Disk number beyond capacity of drive
-
-
-
-CDROM_MEDIA_CHANGED		Check is media changed
-
-	usage:
-
-	  int slot;
-	  ioctl(fd, CDROM_MEDIA_CHANGED, slot);
-
-	inputs:
-	  Slot number to be tested, always zero except for jukeboxes.
-	  May also be special values CDSL_NONE or CDSL_CURRENT
-
-	outputs:
-	  Ioctl return value is 0 or 1 depending on whether the media
-	  has been changed, or -1 on error.
-
-	error returns:
-	  ENOSYS	Drive can't detect media change
-	  EINVAL	Slot number beyond capacity of drive
-	  ENOMEM	Out of memory
-
-
-
-CDROM_DRIVE_STATUS		Get tray position, etc.
-
-	usage:
-
-	  int slot;
-	  ioctl(fd, CDROM_DRIVE_STATUS, slot);
-
-	inputs:
-	  Slot number to be tested, always zero except for jukeboxes.
-	  May also be special values CDSL_NONE or CDSL_CURRENT
-
-	outputs:
-	  Ioctl return value will be one of the following values
-	  from <linux/cdrom.h>:
-
-	    CDS_NO_INFO		Information not available.
-	    CDS_NO_DISC
-	    CDS_TRAY_OPEN
-	    CDS_DRIVE_NOT_READY
-	    CDS_DISC_OK
-	    -1			error
-
-	error returns:
-	  ENOSYS	Drive can't detect drive status
-	  EINVAL	Slot number beyond capacity of drive
-	  ENOMEM	Out of memory
-
-
-
-
-CDROM_DISC_STATUS		Get disc type, etc.
-
-	usage:
-
-	  ioctl(fd, CDROM_DISC_STATUS, 0);
-
-	inputs:		none
-
-	outputs:
-	  Ioctl return value will be one of the following values
-	  from <linux/cdrom.h>:
-	    CDS_NO_INFO
-	    CDS_AUDIO
-	    CDS_MIXED
-	    CDS_XA_2_2
-	    CDS_XA_2_1
-	    CDS_DATA_1
-
-	error returns:	none at present
-
-	notes:
-	  Source code comments state:
-
-	    Ok, this is where problems start.  The current interface for
-	    the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
-	    assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
-	    Unfortunately, while this is often the case, it is also
-	    very common for CDs to have some tracks with data, and some
-	    tracks with audio.	Just because I feel like it, I declare
-	    the following to be the best way to cope.  If the CD has
-	    ANY data tracks on it, it will be returned as a data CD.
-	    If it has any XA tracks, I will return it as that.	Now I
-	    could simplify this interface by combining these returns with
-	    the above, but this more clearly demonstrates the problem
-	    with the current interface.  Too bad this wasn't designed
-	    to use bitmasks...	       -Erik
-
-	    Well, now we have the option CDS_MIXED: a mixed-type CD.
-	    User level programmers might feel the ioctl is not very
-	    useful.
-			---david
-
-
-
-
-CDROM_CHANGER_NSLOTS		Get number of slots
-
-	usage:
-
-	  ioctl(fd, CDROM_CHANGER_NSLOTS, 0);
-
-	inputs:		none
-
-	outputs:
-	  The ioctl return value will be the number of slots in a
-	  CD changer.  Typically 1 for non-multi-disk devices.
-
-	error returns:	none
-
-
-
-CDROM_LOCKDOOR			lock or unlock door
-
-	usage:
-
-	  int lock;
-	  ioctl(fd, CDROM_LOCKDOOR, lock);
-
-	inputs:
-	  Door lock flag, 1=lock, 0=unlock
-
-	outputs:	none
-
-	error returns:
-	  EDRIVE_CANT_DO_THIS	Door lock function not supported.
-	  EBUSY			Attempt to unlock when multiple users
-	  			have the drive open and not CAP_SYS_ADMIN
-
-	notes:
-	  As of 2.6.8.1, the lock flag is a global lock, meaning that
-	  all CD drives will be locked or unlocked together.  This is
-	  probably a bug.
-
-	  The EDRIVE_CANT_DO_THIS value is defined in <linux/cdrom.h>
-	  and is currently (2.6.8.1) the same as EOPNOTSUPP
-
-
-
-CDROM_DEBUG			Turn debug messages on/off
-
-	usage:
-
-	  int debug;
-	  ioctl(fd, CDROM_DEBUG, debug);
-
-	inputs:
-	  Cdrom debug flag, 0=disable, 1=enable
-
-	outputs:
-	  The ioctl return value will be the new debug flag.
-
-	error return:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-
-
-
-CDROM_GET_CAPABILITY		get capabilities
-
-	usage:
-
-	  ioctl(fd, CDROM_GET_CAPABILITY, 0);
-
-	inputs:		none
-
-	outputs:
-	  The ioctl return value is the current device capability
-	  flags.  See CDC_CLOSE_TRAY, CDC_OPEN_TRAY, etc.
-
-
-
-CDROMAUDIOBUFSIZ		set the audio buffer size
-
-	usage:
-
-	  int arg;
-	  ioctl(fd, CDROMAUDIOBUFSIZ, val);
-
-	inputs:
-	  New audio buffer size
-
-	outputs:
-	  The ioctl return value is the new audio buffer size, or -1
-	  on error.
-
-	error return:
-	  ENOSYS	Not supported by this driver.
-
-	notes:
-	  Not supported by all drivers.
-
-
-
-DVD_READ_STRUCT			Read structure
-
-	usage:
-
-	  dvd_struct s;
-	  ioctl(fd, DVD_READ_STRUCT, &s);
-
-	inputs:
-	  dvd_struct structure, containing:
-	    type		specifies the information desired, one of
-	    			DVD_STRUCT_PHYSICAL, DVD_STRUCT_COPYRIGHT,
-				DVD_STRUCT_DISCKEY, DVD_STRUCT_BCA,
-				DVD_STRUCT_MANUFACT
-	    physical.layer_num	desired layer, indexed from 0
-	    copyright.layer_num	desired layer, indexed from 0
-	    disckey.agid
-
-	outputs:
-	  dvd_struct structure, containing:
-	    physical		for type == DVD_STRUCT_PHYSICAL
-	    copyright		for type == DVD_STRUCT_COPYRIGHT
-	    disckey.value	for type == DVD_STRUCT_DISCKEY
-	    bca.{len,value}	for type == DVD_STRUCT_BCA
-	    manufact.{len,valu}	for type == DVD_STRUCT_MANUFACT
-
-	error returns:
-	  EINVAL	physical.layer_num exceeds number of layers
-	  EIO		Received invalid response from drive
-
-
-
-DVD_WRITE_STRUCT		Write structure
-
-	Not implemented, as of 2.6.8.1
-
-
-
-DVD_AUTH			Authentication
-
-	usage:
-
-	  dvd_authinfo ai;
-	  ioctl(fd, DVD_AUTH, &ai);
-
-	inputs:
-	  dvd_authinfo structure.  See <linux/cdrom.h>
-
-	outputs:
-	  dvd_authinfo structure.
-
-	error return:
-	  ENOTTY	ai.type not recognized.
-
-
-
-CDROM_SEND_PACKET		send a packet to the drive
-
-	usage:
-
-	  struct cdrom_generic_command cgc;
-	  ioctl(fd, CDROM_SEND_PACKET, &cgc);
-
-	inputs:
-	  cdrom_generic_command structure containing the packet to send.
-
-	outputs:	none
-	  cdrom_generic_command structure containing results.
-
-	error return:
-	  EIO		command failed.
-	  EPERM		Operation not permitted, either because a
-			write command was attempted on a drive which
-			is opened read-only, or because the command
-			requires CAP_SYS_RAWIO
-	  EINVAL	cgc.data_direction not set
-
-
-
-CDROM_NEXT_WRITABLE		get next writable block
-
-	usage:
-
-	  long next;
-	  ioctl(fd, CDROM_NEXT_WRITABLE, &next);
-
-	inputs:		none
-
-	outputs:
-	  The next writable block.
-
-	notes:
-	  If the device does not support this ioctl directly, the
-	  ioctl will return CDROM_LAST_WRITTEN + 7.
-
-
-
-CDROM_LAST_WRITTEN		get last block written on disc
-
-	usage:
-
-	  long last;
-	  ioctl(fd, CDROM_LAST_WRITTEN, &last);
-
-	inputs:		none
-
-	outputs:
-	  The last block written on disc
-
-	notes:
-	  If the device does not support this ioctl directly, the
-	  result is derived from the disc's table of contents.  If the
-	  table of contents can't be read, this ioctl returns an
-	  error.
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.rst
index 18eb98c44ffe..e822e3dff176 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.rst
@@ -1,9 +1,10 @@
-		Summary of HDIO_ ioctl calls.
-		============================
+==============================
+Summary of `HDIO_` ioctl calls
+==============================
 
-		Edward A. Falk <efalk@google.com>
+- Edward A. Falk <efalk@google.com>
 
-		November, 2004
+November, 2004
 
 This document attempts to describe the ioctl(2) calls supported by
 the HD/IDE layer.  These are by-and-large implemented (as of Linux 2.6)
@@ -14,6 +15,7 @@ are as follows:
 
     ioctls that pass argument pointers to user space:
 
+	=======================	=======================================
 	HDIO_GETGEO		get device geometry
 	HDIO_GET_UNMASKINTR	get current unmask setting
 	HDIO_GET_MULTCOUNT	get current IDE blockmode setting
@@ -36,9 +38,11 @@ are as follows:
 	HDIO_DRIVE_TASK		execute task and special drive command
 	HDIO_DRIVE_CMD		execute a special drive command
 	HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
+	=======================	=======================================
 
     ioctls that pass non-pointer values:
 
+	=======================	=======================================
 	HDIO_SET_MULTCOUNT	change IDE blockmode
 	HDIO_SET_UNMASKINTR	permit other irqs during I/O
 	HDIO_SET_KEEPSETTINGS	keep ioctl settings on reset
@@ -57,16 +61,13 @@ are as follows:
 
 	HDIO_SET_IDE_SCSI	Set scsi emulation mode on/off
 	HDIO_SET_SCSI_IDE	not implemented yet
+	=======================	=======================================
 
 
 The information that follows was determined from reading kernel source
 code.  It is likely that some corrections will be made over time.
 
-
-
-
-
-
+------------------------------------------------------------------------------
 
 General:
 
@@ -80,459 +81,610 @@ General:
 	Unless otherwise specified, all data structures and constants
 	are defined in <linux/hdreg.h>
 
+------------------------------------------------------------------------------
 
+HDIO_GETGEO
+	get device geometry
 
-HDIO_GETGEO			get device geometry
 
-	usage:
+	usage::
 
 	  struct hd_geometry geom;
+
 	  ioctl(fd, HDIO_GETGEO, &geom);
 
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
+		hd_geometry structure containing:
 
-	  hd_geometry structure containing:
 
+	    =========	==================================
 	    heads	number of heads
 	    sectors	number of sectors/track
 	    cylinders	number of cylinders, mod 65536
 	    start	starting sector of this partition.
+	    =========	==================================
 
 
 	error returns:
-	  EINVAL	if the device is not a disk drive or floppy drive,
-	  		or if the user passes a null pointer
+	  - EINVAL
+
+			if the device is not a disk drive or floppy drive,
+			or if the user passes a null pointer
 
 
 	notes:
+		Not particularly useful with modern disk drives, whose geometry
+		is a polite fiction anyway.  Modern drives are addressed
+		purely by sector number nowadays (lba addressing), and the
+		drive geometry is an abstraction which is actually subject
+		to change.  Currently (as of Nov 2004), the geometry values
+		are the "bios" values -- presumably the values the drive had
+		when Linux first booted.
 
-	  Not particularly useful with modern disk drives, whose geometry
-	  is a polite fiction anyway.  Modern drives are addressed
-	  purely by sector number nowadays (lba addressing), and the
-	  drive geometry is an abstraction which is actually subject
-	  to change.  Currently (as of Nov 2004), the geometry values
-	  are the "bios" values -- presumably the values the drive had
-	  when Linux first booted.
+		In addition, the cylinders field of the hd_geometry is an
+		unsigned short, meaning that on most architectures, this
+		ioctl will not return a meaningful value on drives with more
+		than 65535 tracks.
 
-	  In addition, the cylinders field of the hd_geometry is an
-	  unsigned short, meaning that on most architectures, this
-	  ioctl will not return a meaningful value on drives with more
-	  than 65535 tracks.
+		The start field is unsigned long, meaning that it will not
+		contain a meaningful value for disks over 219 Gb in size.
 
-	  The start field is unsigned long, meaning that it will not
-	  contain a meaningful value for disks over 219 Gb in size.
 
 
 
+HDIO_GET_UNMASKINTR
+	get current unmask setting
 
-HDIO_GET_UNMASKINTR		get current unmask setting
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_UNMASKINTR, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the drive's current unmask setting
+		The value of the drive's current unmask setting
 
 
 
-HDIO_SET_UNMASKINTR		permit other irqs during I/O
 
-	usage:
+
+HDIO_SET_UNMASKINTR
+	permit other irqs during I/O
+
+
+	usage::
 
 	  unsigned long val;
+
 	  ioctl(fd, HDIO_SET_UNMASKINTR, val);
 
 	inputs:
-	  New value for unmask flag
+		New value for unmask flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
+
 
 
 
+HDIO_GET_MULTCOUNT
+	get current IDE blockmode setting
 
-HDIO_GET_MULTCOUNT		get current IDE blockmode setting
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_MULTCOUNT, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current IDE block mode setting.  This
-	  controls how many sectors the drive will transfer per
-	  interrupt.
+		The value of the current IDE block mode setting.  This
+		controls how many sectors the drive will transfer per
+		interrupt.
+
 
 
+HDIO_SET_MULTCOUNT
+	change IDE blockmode
 
-HDIO_SET_MULTCOUNT		change IDE blockmode
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_MULTCOUNT, val);
 
 	inputs:
-	  New value for IDE block mode setting.  This controls how many
-	  sectors the drive will transfer per interrupt.
+		New value for IDE block mode setting.  This controls how many
+		sectors the drive will transfer per interrupt.
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range supported by disk.
-	  EBUSY		Controller busy or blockmode already set.
-	  EIO		Drive did not accept new block mode.
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range supported by disk.
+	  - EBUSY	Controller busy or blockmode already set.
+	  - EIO		Drive did not accept new block mode.
 
 	notes:
-
-	  Source code comments read:
+	  Source code comments read::
 
 	    This is tightly woven into the driver->do_special cannot
 	    touch.  DON'T do it again until a total personality rewrite
 	    is committed.
 
 	  If blockmode has already been set, this ioctl will fail with
-	  EBUSY
+	  -EBUSY
 
 
 
-HDIO_GET_QDMA			get use-qdma flag
+HDIO_GET_QDMA
+	get use-qdma flag
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_XFER			set transfer rate via proc
+HDIO_SET_XFER
+	set transfer rate via proc
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_OBSOLETE_IDENTITY		OBSOLETE, DO NOT USE
+HDIO_OBSOLETE_IDENTITY
+	OBSOLETE, DO NOT USE
+
 
 	Same as HDIO_GET_IDENTITY (see below), except that it only
 	returns the first 142 bytes of drive identity information.
 
 
 
-HDIO_GET_IDENTITY		get IDE identification info
+HDIO_GET_IDENTITY
+	get IDE identification info
+
 
-	usage:
+	usage::
 
 	  unsigned char identity[512];
+
 	  ioctl(fd, HDIO_GET_IDENTITY, identity);
 
-	inputs:		none
+	inputs:
+		none
 
-	outputs:
 
-	  ATA drive identity information.  For full description, see
-	  the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
-	  the ATA specification.
+
+	outputs:
+		ATA drive identity information.  For full description, see
+		the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
+		the ATA specification.
 
 	error returns:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  ENOMSG	IDENTIFY DEVICE information not available
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - ENOMSG	IDENTIFY DEVICE information not available
 
 	notes:
+		Returns information that was obtained when the drive was
+		probed.  Some of this information is subject to change, and
+		this ioctl does not re-probe the drive to update the
+		information.
 
-	  Returns information that was obtained when the drive was
-	  probed.  Some of this information is subject to change, and
-	  this ioctl does not re-probe the drive to update the
-	  information.
+		This information is also available from /proc/ide/hdX/identify
 
-	  This information is also available from /proc/ide/hdX/identify
 
 
+HDIO_GET_KEEPSETTINGS
+	get keep-settings-on-reset flag
 
-HDIO_GET_KEEPSETTINGS		get keep-settings-on-reset flag
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_KEEPSETTINGS, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current "keep settings" flag
+		The value of the current "keep settings" flag
+
+
 
 	notes:
+		When set, indicates that kernel should restore settings
+		after a drive reset.
 
-	  When set, indicates that kernel should restore settings
-	  after a drive reset.
 
 
+HDIO_SET_KEEPSETTINGS
+	keep ioctl settings on reset
 
-HDIO_SET_KEEPSETTINGS		keep ioctl settings on reset
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_KEEPSETTINGS, val);
 
 	inputs:
-	  New value for keep_settings flag
+		New value for keep_settings flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY		Controller busy
+
 
 
+HDIO_GET_32BIT
+	get current io_32bit setting
 
-HDIO_GET_32BIT			get current io_32bit setting
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_32BIT, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current io_32bit setting
+		The value of the current io_32bit setting
+
+
 
 	notes:
+		0=16-bit, 1=32-bit, 2,3 = 32bit+sync
+
 
-	  0=16-bit, 1=32-bit, 2,3 = 32bit+sync
 
 
 
-HDIO_GET_NOWERR			get ignore-write-error flag
+HDIO_GET_NOWERR
+	get ignore-write-error flag
 
-	usage:
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_NOWERR, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current ignore-write-error flag
+		The value of the current ignore-write-error flag
 
 
 
-HDIO_GET_DMA			get use-dma flag
 
-	usage:
+
+HDIO_GET_DMA
+	get use-dma flag
+
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_DMA, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current use-dma flag
+		The value of the current use-dma flag
 
 
 
-HDIO_GET_NICE			get nice flags
 
-	usage:
+
+HDIO_GET_NICE
+	get nice flags
+
+
+	usage::
 
 	  long nice;
+
 	  ioctl(fd, HDIO_GET_NICE, &nice);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
+		The drive's "nice" values.
+
 
-	  The drive's "nice" values.
 
 	notes:
+		Per-drive flags which determine when the system will give more
+		bandwidth to other devices sharing the same IDE bus.
 
-	  Per-drive flags which determine when the system will give more
-	  bandwidth to other devices sharing the same IDE bus.
-	  See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
+		See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
 
 
 
 
-HDIO_SET_NICE			set nice flags
+HDIO_SET_NICE
+	set nice flags
 
-	usage:
+
+	usage::
 
 	  unsigned long nice;
+
 	  ...
 	  ioctl(fd, HDIO_SET_NICE, nice);
 
 	inputs:
-	  bitmask of nice flags.
+		bitmask of nice flags.
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EPERM		Flags other than DSC_OVERLAP and NICE_1 set.
-	  EPERM		DSC_OVERLAP specified but not supported by drive
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EPERM	Flags other than DSC_OVERLAP and NICE_1 set.
+	  - EPERM	DSC_OVERLAP specified but not supported by drive
 
 	notes:
+		This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
+		provided by the user.
 
-	  This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
-	  provided by the user.
+		Nice flags are listed in <linux/hdreg.h>, starting with
+		IDE_NICE_DSC_OVERLAP.  These values represent shifts.
 
-	  Nice flags are listed in <linux/hdreg.h>, starting with
-	  IDE_NICE_DSC_OVERLAP.  These values represent shifts.
 
 
 
 
+HDIO_GET_WCACHE
+	get write cache mode on|off
 
-HDIO_GET_WCACHE			get write cache mode on|off
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_WCACHE, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current write cache mode
+		The value of the current write cache mode
 
 
 
-HDIO_GET_ACOUSTIC		get acoustic value
 
-	usage:
+
+HDIO_GET_ACOUSTIC
+	get acoustic value
+
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_ACOUSTIC, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current acoustic settings
+		The value of the current acoustic settings
+
+
 
 	notes:
+		See HDIO_SET_ACOUSTIC
+
 
-	  See HDIO_SET_ACOUSTIC
 
 
 
 HDIO_GET_ADDRESS
+	usage::
 
-	usage:
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_ADDRESS, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current addressing mode:
-	    0 = 28-bit
-	    1 = 48-bit
-	    2 = 48-bit doing 28-bit
-	    3 = 64-bit
+		The value of the current addressing mode:
+
+	    =  ===================
+	    0  28-bit
+	    1  48-bit
+	    2  48-bit doing 28-bit
+	    3  64-bit
+	    =  ===================
 
 
 
-HDIO_GET_BUSSTATE		get the bus state of the hwif
+HDIO_GET_BUSSTATE
+	get the bus state of the hwif
 
-	usage:
+
+	usage::
 
 	  long state;
+
 	  ioctl(fd, HDIO_SCAN_HWIF, &state);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  Current power state of the IDE bus.  One of BUSSTATE_OFF,
-	  BUSSTATE_ON, or BUSSTATE_TRISTATE
+		Current power state of the IDE bus.  One of BUSSTATE_OFF,
+		BUSSTATE_ON, or BUSSTATE_TRISTATE
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
 
 
 
 
-HDIO_SET_BUSSTATE		set the bus state of the hwif
+HDIO_SET_BUSSTATE
+	set the bus state of the hwif
 
-	usage:
+
+	usage::
 
 	  int state;
+
 	  ...
 	  ioctl(fd, HDIO_SCAN_HWIF, state);
 
 	inputs:
-	  Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
-	  or BUSSTATE_TRISTATE
+		Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
+		or BUSSTATE_TRISTATE
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  EOPNOTSUPP	Hardware interface does not support bus power control
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EOPNOTSUPP	Hardware interface does not support bus power control
+
 
 
 
+HDIO_TRISTATE_HWIF
+	execute a channel tristate
 
-HDIO_TRISTATE_HWIF		execute a channel tristate
 
 	Not implemented, as of 2.6.8.1.  See HDIO_SET_BUSSTATE
 
 
 
-HDIO_DRIVE_RESET		execute a device reset
+HDIO_DRIVE_RESET
+	execute a device reset
+
 
-	usage:
+	usage::
 
 	  int args[3]
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_RESET, args);
 
-	inputs:		none
+	inputs:
+		none
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  ENXIO		No such device:	phy dead or ctl_addr == 0
-	  EIO		I/O error:	reset timed out or hardware error
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - ENXIO	No such device:	phy dead or ctl_addr == 0
+	  - EIO		I/O error:	reset timed out or hardware error
 
 	notes:
 
-	  Execute a reset on the device as soon as the current IO
-	  operation has completed.
+	  - Execute a reset on the device as soon as the current IO
+	    operation has completed.
 
-	  Executes an ATAPI soft reset if applicable, otherwise
-	  executes an ATA soft reset on the controller.
+	  - Executes an ATAPI soft reset if applicable, otherwise
+	    executes an ATA soft reset on the controller.
 
 
 
-HDIO_DRIVE_TASKFILE		execute raw taskfile
+HDIO_DRIVE_TASKFILE
+	execute raw taskfile
 
-	Note:  If you don't have a copy of the ANSI ATA specification
-	handy, you should probably ignore this ioctl.
 
-	Execute an ATA disk command directly by writing the "taskfile"
-	registers of the drive.  Requires ADMIN and RAWIO access
-	privileges.
+	Note:
+		If you don't have a copy of the ANSI ATA specification
+		handy, you should probably ignore this ioctl.
+
+	- Execute an ATA disk command directly by writing the "taskfile"
+	  registers of the drive.  Requires ADMIN and RAWIO access
+	  privileges.
 
-	usage:
+	usage::
 
 	  struct {
+
 	    ide_task_request_t req_task;
 	    u8 outbuf[OUTPUT_SIZE];
 	    u8 inbuf[INPUT_SIZE];
@@ -548,6 +700,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 
 	  (See below for details on memory area passed to ioctl.)
 
+	  ============	===================================================
 	  io_ports[8]	values to be written to taskfile registers
 	  hob_ports[8]	high-order bytes, for extended commands.
 	  out_flags	flags indicating which registers are valid
@@ -557,24 +710,29 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	  out_size	size of output buffer
 	  outbuf	buffer of data to be transmitted to disk
 	  inbuf		buffer of data to be received from disk (see [1])
+	  ============	===================================================
 
 	outputs:
 
+	  ===========	====================================================
 	  io_ports[]	values returned in the taskfile registers
 	  hob_ports[]	high-order bytes, for extended commands.
 	  out_flags	flags indicating which registers are valid (see [2])
 	  in_flags	flags indicating which registers should be returned
 	  outbuf	buffer of data to be transmitted to disk (see [1])
 	  inbuf		buffer of data to be received from disk
+	  ===========	====================================================
 
 	error returns:
-	  EACCES	CAP_SYS_ADMIN or CAP_SYS_RAWIO privilege not set.
-	  ENOMSG	Device is not a disk drive.
-	  ENOMEM	Unable to allocate memory for task
-	  EFAULT	req_cmd == TASKFILE_IN_OUT (not implemented as of 2.6.8)
-	  EPERM		req_cmd == TASKFILE_MULTI_OUT and drive
-	  		multi-count not yet set.
-	  EIO		Drive failed the command.
+	  - EACCES	CAP_SYS_ADMIN or CAP_SYS_RAWIO privilege not set.
+	  - ENOMSG	Device is not a disk drive.
+	  - ENOMEM	Unable to allocate memory for task
+	  - EFAULT	req_cmd == TASKFILE_IN_OUT (not implemented as of 2.6.8)
+	  - EPERM
+
+			req_cmd == TASKFILE_MULTI_OUT and drive
+			multi-count not yet set.
+	  - EIO		Drive failed the command.
 
 	notes:
 
@@ -615,22 +773,25 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	  Command is passed to the disk drive via the ide_task_request_t
 	  structure, which contains these fields:
 
+	    ============	===============================================
 	    io_ports[8]		values for the taskfile registers
 	    hob_ports[8]	high-order bytes, for extended commands
 	    out_flags		flags indicating which entries in the
-	    			io_ports[] and hob_ports[] arrays
+				io_ports[] and hob_ports[] arrays
 				contain valid values.  Type ide_reg_valid_t.
 	    in_flags		flags indicating which entries in the
-	    			io_ports[] and hob_ports[] arrays
+				io_ports[] and hob_ports[] arrays
 				are expected to contain valid values
 				on return.
 	    data_phase		See below
 	    req_cmd		Command type, see below
 	    out_size		output (user->drive) buffer size, bytes
 	    in_size		input (drive->user) buffer size, bytes
+	    ============	===============================================
 
 	  When out_flags is zero, the following registers are loaded.
 
+	    ============	===============================================
 	    HOB_FEATURE		If the drive supports LBA48
 	    HOB_NSECTOR		If the drive supports LBA48
 	    HOB_SECTOR		If the drive supports LBA48
@@ -644,9 +805,11 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    SELECT		First, masked with 0xE0 if LBA48, 0xEF
 				otherwise; then, or'ed with the default
 				value of SELECT.
+	    ============	===============================================
 
 	  If any bit in out_flags is set, the following registers are loaded.
 
+	    ============	===============================================
 	    HOB_DATA		If out_flags.b.data is set.  HOB_DATA will
 				travel on DD8-DD15 on little endian machines
 				and on DD0-DD7 on big endian machines.
@@ -664,6 +827,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    HCYL		If out_flags.b.hcyl is set
 	    SELECT		Or'ed with the default value of SELECT and
 				loaded regardless of out_flags.b.select.
+	    ============	===============================================
 
 	  Taskfile registers are read back from the drive into
 	  {io|hob}_ports[] after the command completes iff one of the
@@ -674,6 +838,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    2. One or more than one bits are set in out_flags.
 	    3. The requested data_phase is TASKFILE_NO_DATA.
 
+	    ============	===============================================
 	    HOB_DATA		If in_flags.b.data is set.  It will contain
 				DD8-DD15 on little endian machines and
 				DD0-DD7 on big endian machines.
@@ -689,10 +854,12 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    SECTOR
 	    LCYL
 	    HCYL
+	    ============	===============================================
 
 	  The data_phase field describes the data transfer to be
 	  performed.  Value is one of:
 
+	    ===================        ========================================
 	    TASKFILE_IN
 	    TASKFILE_MULTI_IN
 	    TASKFILE_OUT
@@ -708,15 +875,18 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    TASKFILE_P_OUT		unimplemented
 	    TASKFILE_P_OUT_DMA		unimplemented
 	    TASKFILE_P_OUT_DMAQ		unimplemented
+	    ===================        ========================================
 
 	  The req_cmd field classifies the command type.  It may be
 	  one of:
 
+	    ========================    =======================================
 	    IDE_DRIVE_TASK_NO_DATA
 	    IDE_DRIVE_TASK_SET_XFER	unimplemented
 	    IDE_DRIVE_TASK_IN
 	    IDE_DRIVE_TASK_OUT		unimplemented
 	    IDE_DRIVE_TASK_RAW_WRITE
+	    ========================    =======================================
 
 	  [6] Do not access {in|out}_flags->all except for resetting
 	  all the bits.  Always access individual bit fields.  ->all
@@ -726,45 +896,57 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 
 
 
-HDIO_DRIVE_CMD			execute a special drive command
+HDIO_DRIVE_CMD
+	execute a special drive command
+
 
 	Note:  If you don't have a copy of the ANSI ATA specification
 	handy, you should probably ignore this ioctl.
 
-	usage:
+	usage::
 
 	  u8 args[4+XFER_SIZE];
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_CMD, args);
 
 	inputs:
+	    Commands other than WIN_SMART:
 
-	  Commands other than WIN_SMART
+	    =======     =======
 	    args[0]	COMMAND
 	    args[1]	NSECTOR
 	    args[2]	FEATURE
 	    args[3]	NSECTOR
+	    =======     =======
+
+	    WIN_SMART:
 
-	  WIN_SMART
+	    =======     =======
 	    args[0]	COMMAND
 	    args[1]	SECTOR
 	    args[2]	FEATURE
 	    args[3]	NSECTOR
+	    =======     =======
 
 	outputs:
+		args[] buffer is filled with register values followed by any
+
 
-	  args[] buffer is filled with register values followed by any
 	  data returned by the disk.
+
+	    ========	====================================================
 	    args[0]	status
 	    args[1]	error
 	    args[2]	NSECTOR
 	    args[3]	undefined
 	    args[4+]	NSECTOR * 512 bytes of data returned by the command.
+	    ========	====================================================
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  ENOMEM	Unable to allocate memory for task
-	  EIO		Drive reports error
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - ENOMEM	Unable to allocate memory for task
+	  - EIO		Drive reports error
 
 	notes:
 
@@ -789,20 +971,24 @@ HDIO_DRIVE_CMD			execute a special drive command
 
 
 
-HDIO_DRIVE_TASK			execute task and special drive command
+HDIO_DRIVE_TASK
+	execute task and special drive command
+
 
 	Note:  If you don't have a copy of the ANSI ATA specification
 	handy, you should probably ignore this ioctl.
 
-	usage:
+	usage::
 
 	  u8 args[7];
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_TASK, args);
 
 	inputs:
+	    Taskfile register values:
 
-	  Taskfile register values:
+	    =======	=======
 	    args[0]	COMMAND
 	    args[1]	FEATURE
 	    args[2]	NSECTOR
@@ -810,10 +996,13 @@ HDIO_DRIVE_TASK			execute task and special drive command
 	    args[4]	LCYL
 	    args[5]	HCYL
 	    args[6]	SELECT
+	    =======	=======
 
 	outputs:
+	    Taskfile register values:
+
 
-	  Taskfile register values:
+	    =======	=======
 	    args[0]	status
 	    args[1]	error
 	    args[2]	NSECTOR
@@ -821,12 +1010,13 @@ HDIO_DRIVE_TASK			execute task and special drive command
 	    args[4]	LCYL
 	    args[5]	HCYL
 	    args[6]	SELECT
+	    =======	=======
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  ENOMEM	Unable to allocate memory for task
-	  ENOMSG	Device is not a disk drive.
-	  EIO		Drive failed the command.
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - ENOMEM	Unable to allocate memory for task
+	  - ENOMSG	Device is not a disk drive.
+	  - EIO		Drive failed the command.
 
 	notes:
 
@@ -836,236 +1026,317 @@ HDIO_DRIVE_TASK			execute task and special drive command
 
 
 
-HDIO_DRIVE_CMD_AEB		HDIO_DRIVE_TASK
+HDIO_DRIVE_CMD_AEB
+	HDIO_DRIVE_TASK
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_32BIT			change io_32bit flags
+HDIO_SET_32BIT
+	change io_32bit flags
+
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_32BIT, val);
 
 	inputs:
-	  New value for io_32bit flag
+		New value for io_32bit flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 3]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 3]
+	  - EBUSY	Controller busy
 
 
 
 
-HDIO_SET_NOWERR			change ignore-write-error flag
+HDIO_SET_NOWERR
+	change ignore-write-error flag
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_NOWERR, val);
 
 	inputs:
-	  New value for ignore-write-error flag.  Used for ignoring
+		New value for ignore-write-error flag.  Used for ignoring
+
+
 	  WRERR_STAT
 
-	outputs:	none
+	outputs:
+		none
+
+
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY		Controller busy
+
 
 
+HDIO_SET_DMA
+	change use-dma flag
 
-HDIO_SET_DMA			change use-dma flag
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_DMA, val);
 
 	inputs:
-	  New value for use-dma flag
+		New value for use-dma flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
+
 
 
+HDIO_SET_PIO_MODE
+	reconfig interface to new speed
 
-HDIO_SET_PIO_MODE		reconfig interface to new speed
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_PIO_MODE, val);
 
 	inputs:
-	  New interface speed.
+		New interface speed.
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 255]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 255]
+	  - EBUSY	Controller busy
+
 
 
+HDIO_SCAN_HWIF
+	register and (re)scan interface
 
-HDIO_SCAN_HWIF			register and (re)scan interface
 
-	usage:
+	usage::
 
 	  int args[3]
+
 	  ...
 	  ioctl(fd, HDIO_SCAN_HWIF, args);
 
 	inputs:
+
+	  =======	=========================
 	  args[0]	io address to probe
+
+
 	  args[1]	control address to probe
 	  args[2]	irq number
+	  =======	=========================
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  EIO		Probe failed.
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EIO		Probe failed.
 
 	notes:
+		This ioctl initializes the addresses and irq for a disk
+		controller, probes for drives, and creates /proc/ide
+		interfaces as appropriate.
 
-	  This ioctl initializes the addresses and irq for a disk
-	  controller, probes for drives, and creates /proc/ide
-	  interfaces as appropriate.
 
 
+HDIO_UNREGISTER_HWIF
+	unregister interface
 
-HDIO_UNREGISTER_HWIF		unregister interface
 
-	usage:
+	usage::
 
 	  int index;
+
 	  ioctl(fd, HDIO_UNREGISTER_HWIF, index);
 
 	inputs:
-	  index		index of hardware interface to unregister
+		index		index of hardware interface to unregister
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
 
 	notes:
+		This ioctl removes a hardware interface from the kernel.
 
-	  This ioctl removes a hardware interface from the kernel.
+		Currently (2.6.8) this ioctl silently fails if any drive on
+		the interface is busy.
 
-	  Currently (2.6.8) this ioctl silently fails if any drive on
-	  the interface is busy.
 
 
+HDIO_SET_WCACHE
+	change write cache enable-disable
 
-HDIO_SET_WCACHE			change write cache enable-disable
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_WCACHE, val);
 
 	inputs:
-	  New value for write cache enable
+		New value for write cache enable
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
+
 
 
+HDIO_SET_ACOUSTIC
+	change acoustic behavior
 
-HDIO_SET_ACOUSTIC		change acoustic behavior
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_ACOUSTIC, val);
 
 	inputs:
-	  New value for drive acoustic settings
+		New value for drive acoustic settings
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 254]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 254]
+	  - EBUSY	Controller busy
 
 
 
-HDIO_SET_QDMA			change use-qdma flag
+HDIO_SET_QDMA
+	change use-qdma flag
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_ADDRESS		change lba addressing modes
+HDIO_SET_ADDRESS
+	change lba addressing modes
+
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_ADDRESS, val);
 
 	inputs:
-	  New value for addressing mode
-	    0 = 28-bit
-	    1 = 48-bit
-	    2 = 48-bit doing 28-bit
+		New value for addressing mode
+
+	    =   ===================
+	    0   28-bit
+	    1   48-bit
+	    2   48-bit doing 28-bit
+	    =   ===================
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 2]
-	  EBUSY		Controller busy
-	  EIO		Drive does not support lba48 mode.
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 2]
+	  - EBUSY		Controller busy
+	  - EIO		Drive does not support lba48 mode.
 
 
 HDIO_SET_IDE_SCSI
+	usage::
 
-	usage:
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_IDE_SCSI, val);
 
 	inputs:
-	  New value for scsi emulation mode (?)
+		New value for scsi emulation mode (?)
 
-	outputs:	none
 
-	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
 
+	outputs:
+		none
 
 
-HDIO_SET_SCSI_IDE
 
-	Not implemented, as of 2.6.8.1
+	error return:
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
 
 
+
+HDIO_SET_SCSI_IDE
+	Not implemented, as of 2.6.8.1
diff --git a/Documentation/ioctl/index.rst b/Documentation/ioctl/index.rst
new file mode 100644
index 000000000000..0f0a857f6615
--- /dev/null
+++ b/Documentation/ioctl/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======
+IOCTLs
+======
+
+.. toctree::
+   :maxdepth: 1
+
+   ioctl-number
+
+   botching-up-ioctls
+   ioctl-decoding
+
+   cdrom
+   hdio
diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.rst
index e35efb0cec2e..380d6bb3e3ea 100644
--- a/Documentation/ioctl/ioctl-decoding.txt
+++ b/Documentation/ioctl/ioctl-decoding.rst
@@ -1,10 +1,16 @@
+==============================
+Decoding an IOCTL Magic Number
+==============================
+
 To decode a hex IOCTL code:
 
 Most architectures use this generic format, but check
 include/ARCH/ioctl.h for specifics, e.g. powerpc
 uses 3 bits to encode read/write and 13 bits for size.
 
- bits    meaning
+ ====== ==================================
+ bits   meaning
+ ====== ==================================
  31-30	00 - no parameters: uses _IO macro
 	10 - read: _IOR
 	01 - write: _IOW
@@ -16,9 +22,10 @@ uses 3 bits to encode read/write and 13 bits for size.
 	unique to each driver
 
  7-0	function #
+ ====== ==================================
 
 
 So for example 0x82187201 is a read with arg length of 0x218,
-character 'r' function 1. Grepping the source reveals this is:
+character 'r' function 1. Grepping the source reveals this is::
 
-#define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
+	#define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
diff --git a/Documentation/ioctl/ioctl-number.rst b/Documentation/ioctl/ioctl-number.rst
new file mode 100644
index 000000000000..7f8dcae7a230
--- /dev/null
+++ b/Documentation/ioctl/ioctl-number.rst
@@ -0,0 +1,361 @@
+=============
+Ioctl Numbers
+=============
+
+19 October 1999
+
+Michael Elizabeth Chastain
+<mec@shout.net>
+
+If you are adding new ioctl's to the kernel, you should use the _IO
+macros defined in <linux/ioctl.h>:
+
+    ====== == ============================================
+    _IO    an ioctl with no parameters
+    _IOW   an ioctl with write parameters (copy_from_user)
+    _IOR   an ioctl with read parameters  (copy_to_user)
+    _IOWR  an ioctl with both write and read parameters.
+    ====== == ============================================
+
+'Write' and 'read' are from the user's point of view, just like the
+system calls 'write' and 'read'.  For example, a SET_FOO ioctl would
+be _IOW, although the kernel would actually read data from user space;
+a GET_FOO ioctl would be _IOR, although the kernel would actually write
+data to user space.
+
+The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter
+or number from the table below.  Because of the large number of drivers,
+many drivers share a partial letter with other drivers.
+
+If you are writing a driver for a new device and need a letter, pick an
+unused block with enough room for expansion: 32 to 256 ioctl commands.
+You can register the block by patching this file and submitting the
+patch to Linus Torvalds.  Or you can e-mail me at <mec@shout.net> and
+I'll register one for you.
+
+The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number
+to distinguish ioctls from each other.  The third argument to _IOW,
+_IOR, or _IOWR is the type of the data going into the kernel or coming
+out of the kernel (e.g.  'int' or 'struct foo').  NOTE!  Do NOT use
+sizeof(arg) as the third argument as this results in your ioctl thinking
+it passes an argument of type size_t.
+
+Some devices use their major number as the identifier; this is OK, as
+long as it is unique.  Some devices are irregular and don't follow any
+convention at all.
+
+Following this convention is good because:
+
+(1) Keeping the ioctl's globally unique helps error checking:
+    if a program calls an ioctl on the wrong device, it will get an
+    error rather than some unexpected behaviour.
+
+(2) The 'strace' build procedure automatically finds ioctl numbers
+    defined with _IO, _IOW, _IOR, or _IOWR.
+
+(3) 'strace' can decode numbers back into useful names when the
+    numbers are unique.
+
+(4) People looking for ioctls can grep for them more easily when
+    this convention is used to define the ioctl numbers.
+
+(5) When following the convention, the driver code can use generic
+    code to copy the parameters between user and kernel space.
+
+This table lists ioctls visible from user land for Linux/x86.  It contains
+most drivers up to 2.6.31, but I know I am missing some.  There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
+
+====  =====  ======================================================= ================================================================
+Code  Seq#    Include File                                           Comments
+      (hex)
+====  =====  ======================================================= ================================================================
+0x00  00-1F  linux/fs.h                                              conflict!
+0x00  00-1F  scsi/scsi_ioctl.h                                       conflict!
+0x00  00-1F  linux/fb.h                                              conflict!
+0x00  00-1F  linux/wavefront.h                                       conflict!
+0x02  all    linux/fd.h
+0x03  all    linux/hdreg.h
+0x04  D2-DC  linux/umsdos_fs.h                                       Dead since 2.6.11, but don't reuse these.
+0x06  all    linux/lp.h
+0x09  all    linux/raid/md_u.h
+0x10  00-0F  drivers/char/s390/vmcp.h
+0x10  10-1F  arch/s390/include/uapi/sclp_ctl.h
+0x10  20-2F  arch/s390/include/uapi/asm/hypfs.h
+0x12  all    linux/fs.h
+             linux/blkpg.h
+0x1b  all                                                            InfiniBand Subsystem
+                                                                     <http://infiniband.sourceforge.net/>
+0x20  all    drivers/cdrom/cm206.h
+0x22  all    scsi/sg.h
+'!'   00-1F  uapi/linux/seccomp.h
+'#'   00-3F                                                          IEEE 1394 Subsystem
+                                                                     Block for the entire subsystem
+'$'   00-0F  linux/perf_counter.h, linux/perf_event.h
+'%'   00-0F  include/uapi/linux/stm.h                                System Trace Module subsystem
+                                                                     <mailto:alexander.shishkin@linux.intel.com>
+'&'   00-07  drivers/firewire/nosy-user.h
+'1'   00-1F  linux/timepps.h                                         PPS kit from Ulrich Windl
+                                                                     <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2'   01-04  linux/i2o.h
+'3'   00-0F  drivers/s390/char/raw3270.h                             conflict!
+'3'   00-1F  linux/suspend_ioctls.h,                                 conflict!
+             kernel/power/user.c
+'8'   all                                                            SNP8023 advanced NIC card
+                                                                     <mailto:mcr@solidum.com>
+';'   64-7F  linux/vfio.h
+'@'   00-0F  linux/radeonfb.h                                        conflict!
+'@'   00-0F  drivers/video/aty/aty128fb.c                            conflict!
+'A'   00-1F  linux/apm_bios.h                                        conflict!
+'A'   00-0F  linux/agpgart.h,                                        conflict!
+             drivers/char/agp/compat_ioctl.h
+'A'   00-7F  sound/asound.h                                          conflict!
+'B'   00-1F  linux/cciss_ioctl.h                                     conflict!
+'B'   00-0F  include/linux/pmu.h                                     conflict!
+'B'   C0-FF  advanced bbus                                           <mailto:maassen@uni-freiburg.de>
+'C'   all    linux/soundcard.h                                       conflict!
+'C'   01-2F  linux/capi.h                                            conflict!
+'C'   F0-FF  drivers/net/wan/cosa.h                                  conflict!
+'D'   all    arch/s390/include/asm/dasd.h
+'D'   40-5F  drivers/scsi/dpt/dtpi_ioctl.h
+'D'   05     drivers/scsi/pmcraid.h
+'E'   all    linux/input.h                                           conflict!
+'E'   00-0F  xen/evtchn.h                                            conflict!
+'F'   all    linux/fb.h                                              conflict!
+'F'   01-02  drivers/scsi/pmcraid.h                                  conflict!
+'F'   20     drivers/video/fsl-diu-fb.h                              conflict!
+'F'   20     drivers/video/intelfb/intelfb.h                         conflict!
+'F'   20     linux/ivtvfb.h                                          conflict!
+'F'   20     linux/matroxfb.h                                        conflict!
+'F'   20     drivers/video/aty/atyfb_base.c                          conflict!
+'F'   00-0F  video/da8xx-fb.h                                        conflict!
+'F'   80-8F  linux/arcfb.h                                           conflict!
+'F'   DD     video/sstfb.h                                           conflict!
+'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
+'G'   00-0F  linux/gigaset_dev.h                                     conflict!
+'H'   00-7F  linux/hiddev.h                                          conflict!
+'H'   00-0F  linux/hidraw.h                                          conflict!
+'H'   01     linux/mei.h                                             conflict!
+'H'   02     linux/mei.h                                             conflict!
+'H'   03     linux/mei.h                                             conflict!
+'H'   00-0F  sound/asound.h                                          conflict!
+'H'   20-40  sound/asound_fm.h                                       conflict!
+'H'   80-8F  sound/sfnt_info.h                                       conflict!
+'H'   10-8F  sound/emu10k1.h                                         conflict!
+'H'   10-1F  sound/sb16_csp.h                                        conflict!
+'H'   10-1F  sound/hda_hwdep.h                                       conflict!
+'H'   40-4F  sound/hdspm.h                                           conflict!
+'H'   40-4F  sound/hdsp.h                                            conflict!
+'H'   90     sound/usb/usx2y/usb_stream.h
+'H'   A0     uapi/linux/usb/cdc-wdm.h
+'H'   C0-F0  net/bluetooth/hci.h                                     conflict!
+'H'   C0-DF  net/bluetooth/hidp/hidp.h                               conflict!
+'H'   C0-DF  net/bluetooth/cmtp/cmtp.h                               conflict!
+'H'   C0-DF  net/bluetooth/bnep/bnep.h                               conflict!
+'H'   F1     linux/hid-roccat.h                                      <mailto:erazor_de@users.sourceforge.net>
+'H'   F8-FA  sound/firewire.h
+'I'   all    linux/isdn.h                                            conflict!
+'I'   00-0F  drivers/isdn/divert/isdn_divert.h                       conflict!
+'I'   40-4F  linux/mISDNif.h                                         conflict!
+'J'   00-1F  drivers/scsi/gdth_ioctl.h
+'K'   all    linux/kd.h
+'L'   00-1F  linux/loop.h                                            conflict!
+'L'   10-1F  drivers/scsi/mpt3sas/mpt3sas_ctl.h                      conflict!
+'L'   20-2F  linux/lightnvm.h
+'L'   E0-FF  linux/ppdd.h                                            encrypted disk device driver
+                                                                     <http://linux01.gwdg.de/~alatham/ppdd.html>
+'M'   all    linux/soundcard.h                                       conflict!
+'M'   01-16  mtd/mtd-abi.h                                           conflict!
+      and    drivers/mtd/mtdchar.c
+'M'   01-03  drivers/scsi/megaraid/megaraid_sas.h
+'M'   00-0F  drivers/video/fsl-diu-fb.h                              conflict!
+'N'   00-1F  drivers/usb/scanner.h
+'N'   40-7F  drivers/block/nvme.c
+'O'   00-06  mtd/ubi-user.h                                          UBI
+'P'   all    linux/soundcard.h                                       conflict!
+'P'   60-6F  sound/sscape_ioctl.h                                    conflict!
+'P'   00-0F  drivers/usb/class/usblp.c                               conflict!
+'P'   01-09  drivers/misc/pci_endpoint_test.c                        conflict!
+'Q'   all    linux/soundcard.h
+'R'   00-1F  linux/random.h                                          conflict!
+'R'   01     linux/rfkill.h                                          conflict!
+'R'   C0-DF  net/bluetooth/rfcomm.h
+'S'   all    linux/cdrom.h                                           conflict!
+'S'   80-81  scsi/scsi_ioctl.h                                       conflict!
+'S'   82-FF  scsi/scsi.h                                             conflict!
+'S'   00-7F  sound/asequencer.h                                      conflict!
+'T'   all    linux/soundcard.h                                       conflict!
+'T'   00-AF  sound/asound.h                                          conflict!
+'T'   all    arch/x86/include/asm/ioctls.h                           conflict!
+'T'   C0-DF  linux/if_tun.h                                          conflict!
+'U'   all    sound/asound.h                                          conflict!
+'U'   00-CF  linux/uinput.h                                          conflict!
+'U'   00-EF  linux/usbdevice_fs.h
+'U'   C0-CF  drivers/bluetooth/hci_uart.h
+'V'   all    linux/vt.h                                              conflict!
+'V'   all    linux/videodev2.h                                       conflict!
+'V'   C0     linux/ivtvfb.h                                          conflict!
+'V'   C0     linux/ivtv.h                                            conflict!
+'V'   C0     media/davinci/vpfe_capture.h                            conflict!
+'V'   C0     media/si4713.h                                          conflict!
+'W'   00-1F  linux/watchdog.h                                        conflict!
+'W'   00-1F  linux/wanrouter.h                                       conflict! (pre 3.9)
+'W'   00-3F  sound/asound.h                                          conflict!
+'W'   40-5F  drivers/pci/switch/switchtec.c
+'X'   all    fs/xfs/xfs_fs.h,                                        conflict!
+             fs/xfs/linux-2.6/xfs_ioctl32.h,
+             include/linux/falloc.h,
+             linux/fs.h,
+'X'   all    fs/ocfs2/ocfs_fs.h                                      conflict!
+'X'   01     linux/pktcdvd.h                                         conflict!
+'Y'   all    linux/cyclades.h
+'Z'   14-15  drivers/message/fusion/mptctl.h
+'['   00-3F  linux/usb/tmc.h                                         USB Test and Measurement Devices
+                                                                     <mailto:gregkh@linuxfoundation.org>
+'a'   all    linux/atm*.h, linux/sonet.h                             ATM on linux
+                                                                     <http://lrcwww.epfl.ch/>
+'a'   00-0F  drivers/crypto/qat/qat_common/adf_cfg_common.h          conflict! qat driver
+'b'   00-FF                                                          conflict! bit3 vme host bridge
+                                                                     <mailto:natalia@nikhefk.nikhef.nl>
+'c'   all    linux/cm4000_cs.h                                       conflict!
+'c'   00-7F  linux/comstats.h                                        conflict!
+'c'   00-7F  linux/coda.h                                            conflict!
+'c'   00-1F  linux/chio.h                                            conflict!
+'c'   80-9F  arch/s390/include/asm/chsc.h                            conflict!
+'c'   A0-AF  arch/x86/include/asm/msr.h conflict!
+'d'   00-FF  linux/char/drm/drm.h                                    conflict!
+'d'   02-40  pcmcia/ds.h                                             conflict!
+'d'   F0-FF  linux/digi1.h
+'e'   all    linux/digi1.h                                           conflict!
+'f'   00-1F  linux/ext2_fs.h                                         conflict!
+'f'   00-1F  linux/ext3_fs.h                                         conflict!
+'f'   00-0F  fs/jfs/jfs_dinode.h                                     conflict!
+'f'   00-0F  fs/ext4/ext4.h                                          conflict!
+'f'   00-0F  linux/fs.h                                              conflict!
+'f'   00-0F  fs/ocfs2/ocfs2_fs.h                                     conflict!
+'g'   00-0F  linux/usb/gadgetfs.h
+'g'   20-2F  linux/usb/g_printer.h
+'h'   00-7F                                                          conflict! Charon filesystem
+                                                                     <mailto:zapman@interlan.net>
+'h'   00-1F  linux/hpet.h                                            conflict!
+'h'   80-8F  fs/hfsplus/ioctl.c
+'i'   00-3F  linux/i2o-dev.h                                         conflict!
+'i'   0B-1F  linux/ipmi.h                                            conflict!
+'i'   80-8F  linux/i8k.h
+'j'   00-3F  linux/joystick.h
+'k'   00-0F  linux/spi/spidev.h                                      conflict!
+'k'   00-05  video/kyro.h                                            conflict!
+'k'   10-17  linux/hsi/hsi_char.h                                    HSI character device
+'l'   00-3F  linux/tcfs_fs.h                                         transparent cryptographic file system
+                                                                     <http://web.archive.org/web/%2A/http://mikonos.dia.unisa.it/tcfs>
+'l'   40-7F  linux/udf_fs_i.h                                        in development:
+                                                                     <http://sourceforge.net/projects/linux-udf/>
+'m'   00-09  linux/mmtimer.h                                         conflict!
+'m'   all    linux/mtio.h                                            conflict!
+'m'   all    linux/soundcard.h                                       conflict!
+'m'   all    linux/synclink.h                                        conflict!
+'m'   00-19  drivers/message/fusion/mptctl.h                         conflict!
+'m'   00     drivers/scsi/megaraid/megaraid_ioctl.h                  conflict!
+'n'   00-7F  linux/ncp_fs.h and fs/ncpfs/ioctl.c
+'n'   80-8F  uapi/linux/nilfs2_api.h                                 NILFS2
+'n'   E0-FF  linux/matroxfb.h                                        matroxfb
+'o'   00-1F  fs/ocfs2/ocfs2_fs.h                                     OCFS2
+'o'   00-03  mtd/ubi-user.h                                          conflict! (OCFS2 and UBI overlaps)
+'o'   40-41  mtd/ubi-user.h                                          UBI
+'o'   01-A1  `linux/dvb/*.h`                                         DVB
+'p'   00-0F  linux/phantom.h                                         conflict! (OpenHaptics needs this)
+'p'   00-1F  linux/rtc.h                                             conflict!
+'p'   00-3F  linux/mc146818rtc.h                                     conflict!
+'p'   40-7F  linux/nvram.h
+'p'   80-9F  linux/ppdev.h                                           user-space parport
+                                                                     <mailto:tim@cyberelk.net>
+'p'   A1-A5  linux/pps.h                                             LinuxPPS
+                                                                     <mailto:giometti@linux.it>
+'q'   00-1F  linux/serio.h
+'q'   80-FF  linux/telephony.h                                       Internet PhoneJACK, Internet LineJACK
+             linux/ixjuser.h                                         <http://web.archive.org/web/%2A/http://www.quicknet.net>
+'r'   00-1F  linux/msdos_fs.h and fs/fat/dir.c
+'s'   all    linux/cdk.h
+'t'   00-7F  linux/ppp-ioctl.h
+'t'   80-8F  linux/isdn_ppp.h
+'t'   90-91  linux/toshiba.h                                         toshiba and toshiba_acpi SMM
+'u'   00-1F  linux/smb_fs.h                                          gone
+'u'   20-3F  linux/uvcvideo.h                                        USB video class host driver
+'u'   40-4f  linux/udmabuf.h                                         userspace dma-buf misc device
+'v'   00-1F  linux/ext2_fs.h                                         conflict!
+'v'   00-1F  linux/fs.h                                              conflict!
+'v'   00-0F  linux/sonypi.h                                          conflict!
+'v'   00-0F  media/v4l2-subdev.h                                     conflict!
+'v'   C0-FF  linux/meye.h                                            conflict!
+'w'   all                                                            CERN SCI driver
+'y'   00-1F                                                          packet based user level communications
+                                                                     <mailto:zapman@interlan.net>
+'z'   00-3F                                                          CAN bus card conflict!
+                                                                     <mailto:hdstich@connectu.ulm.circular.de>
+'z'   40-7F                                                          CAN bus card conflict!
+                                                                     <mailto:oe@port.de>
+'z'   10-4F  drivers/s390/crypto/zcrypt_api.h                        conflict!
+'|'   00-7F  linux/media.h
+0x80  00-1F  linux/fb.h
+0x89  00-06  arch/x86/include/asm/sockios.h
+0x89  0B-DF  linux/sockios.h
+0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
+0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
+0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
+0x8B  all    linux/wireless.h
+0x8C  00-3F                                                          WiNRADiO driver
+                                                                     <http://www.winradio.com.au/>
+0x90  00     drivers/cdrom/sbpcd.h
+0x92  00-0F  drivers/usb/mon/mon_bin.c
+0x93  60-7F  linux/auto_fs.h
+0x94  all    fs/btrfs/ioctl.h                                        Btrfs filesystem
+             and linux/fs.h                                          some lifted to vfs/generic
+0x97  00-7F  fs/ceph/ioctl.h                                         Ceph file system
+0x99  00-0F                                                          537-Addinboard driver
+                                                                     <mailto:buk@buks.ipn.de>
+0xA0  all    linux/sdp/sdp.h                                         Industrial Device Project
+                                                                     <mailto:kenji@bitgate.com>
+0xA1  0      linux/vtpm_proxy.h                                      TPM Emulator Proxy Driver
+0xA3  80-8F                                                          Port ACL  in development:
+                                                                     <mailto:tlewis@mindspring.com>
+0xA3  90-9F  linux/dtlk.h
+0xA4  00-1F  uapi/linux/tee.h                                        Generic TEE subsystem
+0xAA  00-3F  linux/uapi/linux/userfaultfd.h
+0xAB  00-1F  linux/nbd.h
+0xAC  00-1F  linux/raw.h
+0xAD  00                                                             Netfilter device in development:
+                                                                     <mailto:rusty@rustcorp.com.au>
+0xAE  all    linux/kvm.h                                             Kernel-based Virtual Machine
+                                                                     <mailto:kvm@vger.kernel.org>
+0xAF  00-1F  linux/fsl_hypervisor.h                                  Freescale hypervisor
+0xB0  all                                                            RATIO devices in development:
+                                                                     <mailto:vgo@ratio.de>
+0xB1  00-1F                                                          PPPoX
+                                                                     <mailto:mostrows@styx.uwaterloo.ca>
+0xB3  00     linux/mmc/ioctl.h
+0xB4  00-0F  linux/gpio.h                                            <mailto:linux-gpio@vger.kernel.org>
+0xB5  00-0F  uapi/linux/rpmsg.h                                      <mailto:linux-remoteproc@vger.kernel.org>
+0xB6  all    linux/fpga-dfl.h
+0xC0  00-0F  linux/usb/iowarrior.h
+0xCA  00-0F  uapi/misc/cxl.h
+0xCA  10-2F  uapi/misc/ocxl.h
+0xCA  80-BF  uapi/scsi/cxlflash_ioctl.h
+0xCB  00-1F                                                          CBM serial IEC bus in development:
+                                                                     <mailto:michael.klein@puffin.lb.shuttle.de>
+0xCC  00-0F  drivers/misc/ibmvmc.h                                   pseries VMC driver
+0xCD  01     linux/reiserfs_fs.h
+0xCF  02     fs/cifs/ioctl.c
+0xDB  00-0F  drivers/char/mwave/mwavepub.h
+0xDD  00-3F                                                          ZFCP device driver see drivers/s390/scsi/
+                                                                     <mailto:aherrman@de.ibm.com>
+0xE5  00-3F  linux/fuse.h
+0xEC  00-01  drivers/platform/chrome/cros_ec_dev.h                   ChromeOS EC driver
+0xF3  00-3F  drivers/usb/misc/sisusbvga/sisusb.h                     sisfb (in development)
+                                                                     <mailto:thomas@winischhofer.net>
+0xF4  00-1F  video/mbxfb.h                                           mbxfb
+                                                                     <mailto:raph@8d.com>
+0xF6  all                                                            LTTng Linux Trace Toolkit Next Generation
+                                                                     <mailto:mathieu.desnoyers@efficios.com>
+0xFD  all    linux/dm-ioctl.h
+0xFE  all    linux/isst_if.h
+====  =====  ======================================================= ================================================================
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
deleted file mode 100644
index ab0b3f686454..000000000000
--- a/Documentation/ioctl/ioctl-number.txt
+++ /dev/null
@@ -1,351 +0,0 @@
-Ioctl Numbers
-19 October 1999
-Michael Elizabeth Chastain
-<mec@shout.net>
-
-If you are adding new ioctl's to the kernel, you should use the _IO
-macros defined in <linux/ioctl.h>:
-
-    _IO    an ioctl with no parameters
-    _IOW   an ioctl with write parameters (copy_from_user)
-    _IOR   an ioctl with read parameters  (copy_to_user)
-    _IOWR  an ioctl with both write and read parameters.
-
-'Write' and 'read' are from the user's point of view, just like the
-system calls 'write' and 'read'.  For example, a SET_FOO ioctl would
-be _IOW, although the kernel would actually read data from user space;
-a GET_FOO ioctl would be _IOR, although the kernel would actually write
-data to user space.
-
-The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter
-or number from the table below.  Because of the large number of drivers,
-many drivers share a partial letter with other drivers.
-
-If you are writing a driver for a new device and need a letter, pick an
-unused block with enough room for expansion: 32 to 256 ioctl commands.
-You can register the block by patching this file and submitting the
-patch to Linus Torvalds.  Or you can e-mail me at <mec@shout.net> and
-I'll register one for you.
-
-The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number
-to distinguish ioctls from each other.  The third argument to _IOW,
-_IOR, or _IOWR is the type of the data going into the kernel or coming
-out of the kernel (e.g.  'int' or 'struct foo').  NOTE!  Do NOT use
-sizeof(arg) as the third argument as this results in your ioctl thinking
-it passes an argument of type size_t.
-
-Some devices use their major number as the identifier; this is OK, as
-long as it is unique.  Some devices are irregular and don't follow any
-convention at all.
-
-Following this convention is good because:
-
-(1) Keeping the ioctl's globally unique helps error checking:
-    if a program calls an ioctl on the wrong device, it will get an
-    error rather than some unexpected behaviour.
-
-(2) The 'strace' build procedure automatically finds ioctl numbers
-    defined with _IO, _IOW, _IOR, or _IOWR.
-
-(3) 'strace' can decode numbers back into useful names when the
-    numbers are unique.
-
-(4) People looking for ioctls can grep for them more easily when
-    this convention is used to define the ioctl numbers.
-
-(5) When following the convention, the driver code can use generic
-    code to copy the parameters between user and kernel space.
-
-This table lists ioctls visible from user land for Linux/x86.  It contains
-most drivers up to 2.6.31, but I know I am missing some.  There has been
-no attempt to list non-X86 architectures or ioctls from drivers/staging/.
-
-Code  Seq#(hex)	Include File		Comments
-========================================================
-0x00	00-1F	linux/fs.h		conflict!
-0x00	00-1F	scsi/scsi_ioctl.h	conflict!
-0x00	00-1F	linux/fb.h		conflict!
-0x00	00-1F	linux/wavefront.h	conflict!
-0x02	all	linux/fd.h
-0x03	all	linux/hdreg.h
-0x04	D2-DC	linux/umsdos_fs.h	Dead since 2.6.11, but don't reuse these.
-0x06	all	linux/lp.h
-0x09	all	linux/raid/md_u.h
-0x10	00-0F	drivers/char/s390/vmcp.h
-0x10	10-1F	arch/s390/include/uapi/sclp_ctl.h
-0x10	20-2F	arch/s390/include/uapi/asm/hypfs.h
-0x12	all	linux/fs.h
-		linux/blkpg.h
-0x1b	all	InfiniBand Subsystem	<http://infiniband.sourceforge.net/>
-0x20	all	drivers/cdrom/cm206.h
-0x22	all	scsi/sg.h
-'!'	00-1F	uapi/linux/seccomp.h
-'#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
-'$'	00-0F	linux/perf_counter.h, linux/perf_event.h
-'%'	00-0F	include/uapi/linux/stm.h
-					System Trace Module subsystem
-					<mailto:alexander.shishkin@linux.intel.com>
-'&'	00-07	drivers/firewire/nosy-user.h
-'1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
-					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
-'2'	01-04	linux/i2o.h
-'3'	00-0F	drivers/s390/char/raw3270.h	conflict!
-'3'	00-1F	linux/suspend_ioctls.h	conflict!
-		and kernel/power/user.c
-'8'	all				SNP8023 advanced NIC card
-					<mailto:mcr@solidum.com>
-';'	64-7F	linux/vfio.h
-'@'	00-0F	linux/radeonfb.h	conflict!
-'@'	00-0F	drivers/video/aty/aty128fb.c	conflict!
-'A'	00-1F	linux/apm_bios.h	conflict!
-'A'	00-0F	linux/agpgart.h		conflict!
-		and drivers/char/agp/compat_ioctl.h
-'A'	00-7F	sound/asound.h		conflict!
-'B'	00-1F	linux/cciss_ioctl.h	conflict!
-'B'	00-0F	include/linux/pmu.h	conflict!
-'B'	C0-FF				advanced bbus
-					<mailto:maassen@uni-freiburg.de>
-'C'	all	linux/soundcard.h	conflict!
-'C'	01-2F	linux/capi.h		conflict!
-'C'	F0-FF	drivers/net/wan/cosa.h	conflict!
-'D'	all	arch/s390/include/asm/dasd.h
-'D'	40-5F	drivers/scsi/dpt/dtpi_ioctl.h
-'D'	05	drivers/scsi/pmcraid.h
-'E'	all	linux/input.h		conflict!
-'E'	00-0F	xen/evtchn.h		conflict!
-'F'	all	linux/fb.h		conflict!
-'F'	01-02	drivers/scsi/pmcraid.h	conflict!
-'F'	20	drivers/video/fsl-diu-fb.h	conflict!
-'F'	20	drivers/video/intelfb/intelfb.h	conflict!
-'F'	20	linux/ivtvfb.h		conflict!
-'F'	20	linux/matroxfb.h	conflict!
-'F'	20	drivers/video/aty/atyfb_base.c	conflict!
-'F'	00-0F	video/da8xx-fb.h	conflict!
-'F'	80-8F	linux/arcfb.h		conflict!
-'F'	DD	video/sstfb.h		conflict!
-'G'	00-3F	drivers/misc/sgi-gru/grulib.h	conflict!
-'G'	00-0F	linux/gigaset_dev.h	conflict!
-'H'	00-7F	linux/hiddev.h		conflict!
-'H'	00-0F	linux/hidraw.h		conflict!
-'H'	01	linux/mei.h		conflict!
-'H'	02	linux/mei.h		conflict!
-'H'	03	linux/mei.h		conflict!
-'H'	00-0F	sound/asound.h		conflict!
-'H'	20-40	sound/asound_fm.h	conflict!
-'H'	80-8F	sound/sfnt_info.h	conflict!
-'H'	10-8F	sound/emu10k1.h		conflict!
-'H'	10-1F	sound/sb16_csp.h	conflict!
-'H'	10-1F	sound/hda_hwdep.h	conflict!
-'H'	40-4F	sound/hdspm.h		conflict!
-'H'	40-4F	sound/hdsp.h		conflict!
-'H'	90	sound/usb/usx2y/usb_stream.h
-'H'	A0	uapi/linux/usb/cdc-wdm.h
-'H'	C0-F0	net/bluetooth/hci.h	conflict!
-'H'	C0-DF	net/bluetooth/hidp/hidp.h	conflict!
-'H'	C0-DF	net/bluetooth/cmtp/cmtp.h	conflict!
-'H'	C0-DF	net/bluetooth/bnep/bnep.h	conflict!
-'H'	F1	linux/hid-roccat.h	<mailto:erazor_de@users.sourceforge.net>
-'H'	F8-FA	sound/firewire.h
-'I'	all	linux/isdn.h		conflict!
-'I'	00-0F	drivers/isdn/divert/isdn_divert.h	conflict!
-'I'	40-4F	linux/mISDNif.h		conflict!
-'J'	00-1F	drivers/scsi/gdth_ioctl.h
-'K'	all	linux/kd.h
-'L'	00-1F	linux/loop.h		conflict!
-'L'	10-1F	drivers/scsi/mpt3sas/mpt3sas_ctl.h	conflict!
-'L'	20-2F	linux/lightnvm.h
-'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
-					<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'	all	linux/soundcard.h	conflict!
-'M'	01-16	mtd/mtd-abi.h		conflict!
-		and drivers/mtd/mtdchar.c
-'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
-'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
-'N'	00-1F	drivers/usb/scanner.h
-'N'	40-7F	drivers/block/nvme.c
-'O'     00-06   mtd/ubi-user.h		UBI
-'P'	all	linux/soundcard.h	conflict!
-'P'	60-6F	sound/sscape_ioctl.h	conflict!
-'P'	00-0F	drivers/usb/class/usblp.c	conflict!
-'P'	01-09	drivers/misc/pci_endpoint_test.c	conflict!
-'Q'	all	linux/soundcard.h
-'R'	00-1F	linux/random.h		conflict!
-'R'	01	linux/rfkill.h		conflict!
-'R'	C0-DF	net/bluetooth/rfcomm.h
-'S'	all	linux/cdrom.h		conflict!
-'S'	80-81	scsi/scsi_ioctl.h	conflict!
-'S'	82-FF	scsi/scsi.h		conflict!
-'S'	00-7F	sound/asequencer.h	conflict!
-'T'	all	linux/soundcard.h	conflict!
-'T'	00-AF	sound/asound.h		conflict!
-'T'	all	arch/x86/include/asm/ioctls.h	conflict!
-'T'	C0-DF	linux/if_tun.h		conflict!
-'U'	all	sound/asound.h		conflict!
-'U'	00-CF	linux/uinput.h		conflict!
-'U'	00-EF	linux/usbdevice_fs.h
-'U'	C0-CF	drivers/bluetooth/hci_uart.h
-'V'	all	linux/vt.h		conflict!
-'V'	all	linux/videodev2.h	conflict!
-'V'	C0	linux/ivtvfb.h		conflict!
-'V'	C0	linux/ivtv.h		conflict!
-'V'	C0	media/davinci/vpfe_capture.h	conflict!
-'V'	C0	media/si4713.h		conflict!
-'W'	00-1F	linux/watchdog.h	conflict!
-'W'	00-1F	linux/wanrouter.h	conflict!		(pre 3.9)
-'W'	00-3F	sound/asound.h		conflict!
-'W'	40-5F   drivers/pci/switch/switchtec.c
-'X'	all	fs/xfs/xfs_fs.h		conflict!
-		and fs/xfs/linux-2.6/xfs_ioctl32.h
-		and include/linux/falloc.h
-		and linux/fs.h
-'X'	all	fs/ocfs2/ocfs_fs.h	conflict!
-'X'	01	linux/pktcdvd.h		conflict!
-'Y'	all	linux/cyclades.h
-'Z'	14-15	drivers/message/fusion/mptctl.h
-'['	00-3F	linux/usb/tmc.h		USB Test and Measurement Devices
-					<mailto:gregkh@linuxfoundation.org>
-'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
-					<http://lrcwww.epfl.ch/>
-'a'	00-0F	drivers/crypto/qat/qat_common/adf_cfg_common.h	conflict! qat driver
-'b'	00-FF				conflict! bit3 vme host bridge
-					<mailto:natalia@nikhefk.nikhef.nl>
-'c'	all	linux/cm4000_cs.h	conflict!
-'c'	00-7F	linux/comstats.h	conflict!
-'c'	00-7F	linux/coda.h		conflict!
-'c'	00-1F	linux/chio.h		conflict!
-'c'	80-9F	arch/s390/include/asm/chsc.h	conflict!
-'c'	A0-AF   arch/x86/include/asm/msr.h	conflict!
-'d'	00-FF	linux/char/drm/drm.h	conflict!
-'d'	02-40	pcmcia/ds.h		conflict!
-'d'	F0-FF	linux/digi1.h
-'e'	all	linux/digi1.h		conflict!
-'f'	00-1F	linux/ext2_fs.h		conflict!
-'f'	00-1F	linux/ext3_fs.h		conflict!
-'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
-'f'	00-0F	fs/ext4/ext4.h		conflict!
-'f'	00-0F	linux/fs.h		conflict!
-'f'	00-0F	fs/ocfs2/ocfs2_fs.h	conflict!
-'g'	00-0F	linux/usb/gadgetfs.h
-'g'	20-2F	linux/usb/g_printer.h
-'h'	00-7F				conflict! Charon filesystem
-					<mailto:zapman@interlan.net>
-'h'	00-1F	linux/hpet.h		conflict!
-'h'	80-8F	fs/hfsplus/ioctl.c
-'i'	00-3F	linux/i2o-dev.h		conflict!
-'i'	0B-1F	linux/ipmi.h		conflict!
-'i'	80-8F	linux/i8k.h
-'j'	00-3F	linux/joystick.h
-'k'	00-0F	linux/spi/spidev.h	conflict!
-'k'	00-05	video/kyro.h		conflict!
-'k'	10-17	linux/hsi/hsi_char.h	HSI character device
-'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
-					<http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
-'l'	40-7F	linux/udf_fs_i.h	in development:
-					<http://sourceforge.net/projects/linux-udf/>
-'m'	00-09	linux/mmtimer.h		conflict!
-'m'	all	linux/mtio.h		conflict!
-'m'	all	linux/soundcard.h	conflict!
-'m'	all	linux/synclink.h	conflict!
-'m'	00-19	drivers/message/fusion/mptctl.h	conflict!
-'m'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
-'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
-'n'	80-8F	uapi/linux/nilfs2_api.h	NILFS2
-'n'	E0-FF	linux/matroxfb.h	matroxfb
-'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
-'o'     00-03   mtd/ubi-user.h		conflict! (OCFS2 and UBI overlaps)
-'o'     40-41   mtd/ubi-user.h		UBI
-'o'     01-A1   linux/dvb/*.h		DVB
-'p'	00-0F	linux/phantom.h		conflict! (OpenHaptics needs this)
-'p'	00-1F	linux/rtc.h		conflict!
-'p'	00-3F	linux/mc146818rtc.h	conflict!
-'p'	40-7F	linux/nvram.h
-'p'	80-9F	linux/ppdev.h		user-space parport
-					<mailto:tim@cyberelk.net>
-'p'	A1-A5	linux/pps.h		LinuxPPS
-					<mailto:giometti@linux.it>
-'q'	00-1F	linux/serio.h
-'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
-		linux/ixjuser.h		<http://web.archive.org/web/*/http://www.quicknet.net>
-'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
-'s'	all	linux/cdk.h
-'t'	00-7F	linux/ppp-ioctl.h
-'t'	80-8F	linux/isdn_ppp.h
-'t'	90-91	linux/toshiba.h		toshiba and toshiba_acpi SMM
-'u'	00-1F	linux/smb_fs.h		gone
-'u'	20-3F	linux/uvcvideo.h	USB video class host driver
-'u'	40-4f	linux/udmabuf.h		userspace dma-buf misc device
-'v'	00-1F	linux/ext2_fs.h		conflict!
-'v'	00-1F	linux/fs.h		conflict!
-'v'	00-0F	linux/sonypi.h		conflict!
-'v'	00-0F	media/v4l2-subdev.h	conflict!
-'v'	C0-FF	linux/meye.h		conflict!
-'w'	all				CERN SCI driver
-'y'	00-1F				packet based user level communications
-					<mailto:zapman@interlan.net>
-'z'	00-3F				CAN bus card	conflict!
-					<mailto:hdstich@connectu.ulm.circular.de>
-'z'	40-7F				CAN bus card	conflict!
-					<mailto:oe@port.de>
-'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
-'|'	00-7F	linux/media.h
-0x80	00-1F	linux/fb.h
-0x89	00-06	arch/x86/include/asm/sockios.h
-0x89	0B-DF	linux/sockios.h
-0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range
-0x89	E0-EF	linux/dn.h		PROTOPRIVATE range
-0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
-0x8B	all	linux/wireless.h
-0x8C	00-3F				WiNRADiO driver
-					<http://www.winradio.com.au/>
-0x90	00	drivers/cdrom/sbpcd.h
-0x92	00-0F	drivers/usb/mon/mon_bin.c
-0x93	60-7F	linux/auto_fs.h
-0x94	all	fs/btrfs/ioctl.h	Btrfs filesystem
-		and linux/fs.h		some lifted to vfs/generic
-0x97	00-7F	fs/ceph/ioctl.h		Ceph file system
-0x99	00-0F				537-Addinboard driver
-					<mailto:buk@buks.ipn.de>
-0xA0	all	linux/sdp/sdp.h		Industrial Device Project
-					<mailto:kenji@bitgate.com>
-0xA1	0	linux/vtpm_proxy.h	TPM Emulator Proxy Driver
-0xA3	80-8F	Port ACL		in development:
-					<mailto:tlewis@mindspring.com>
-0xA3	90-9F	linux/dtlk.h
-0xA4	00-1F	uapi/linux/tee.h	Generic TEE subsystem
-0xAA	00-3F	linux/uapi/linux/userfaultfd.h
-0xAB	00-1F	linux/nbd.h
-0xAC	00-1F	linux/raw.h
-0xAD	00	Netfilter device	in development:
-					<mailto:rusty@rustcorp.com.au>
-0xAE	all	linux/kvm.h		Kernel-based Virtual Machine
-					<mailto:kvm@vger.kernel.org>
-0xAF	00-1F	linux/fsl_hypervisor.h	Freescale hypervisor
-0xB0	all	RATIO devices		in development:
-					<mailto:vgo@ratio.de>
-0xB1	00-1F	PPPoX			<mailto:mostrows@styx.uwaterloo.ca>
-0xB3	00	linux/mmc/ioctl.h
-0xB4	00-0F	linux/gpio.h		<mailto:linux-gpio@vger.kernel.org>
-0xB5	00-0F	uapi/linux/rpmsg.h	<mailto:linux-remoteproc@vger.kernel.org>
-0xB6	all	linux/fpga-dfl.h
-0xC0	00-0F	linux/usb/iowarrior.h
-0xCA	00-0F	uapi/misc/cxl.h
-0xCA	10-2F	uapi/misc/ocxl.h
-0xCA	80-BF	uapi/scsi/cxlflash_ioctl.h
-0xCB	00-1F	CBM serial IEC bus	in development:
-					<mailto:michael.klein@puffin.lb.shuttle.de>
-0xCC	00-0F	drivers/misc/ibmvmc.h    pseries VMC driver
-0xCD	01	linux/reiserfs_fs.h
-0xCF	02	fs/cifs/ioctl.c
-0xDB	00-0F	drivers/char/mwave/mwavepub.h
-0xDD	00-3F	ZFCP device driver	see drivers/s390/scsi/
-					<mailto:aherrman@de.ibm.com>
-0xE5	00-3F	linux/fuse.h
-0xEC	00-01	drivers/platform/chrome/cros_ec_dev.h	ChromeOS EC driver
-0xF3	00-3F	drivers/usb/misc/sisusbvga/sisusb.h	sisfb (in development)
-					<mailto:thomas@winischhofer.net>
-0xF4	00-1F	video/mbxfb.h		mbxfb
-					<mailto:raph@8d.com>
-0xF6	all	LTTng			Linux Trace Toolkit Next Generation
-					<mailto:mathieu.desnoyers@efficios.com>
-0xFD	all	linux/dm-ioctl.h
-0xFE	all	linux/isst_if.h
diff --git a/Documentation/kbuild/index.rst b/Documentation/kbuild/index.rst
index 42d4cbe4460c..e323a3f2cc81 100644
--- a/Documentation/kbuild/index.rst
+++ b/Documentation/kbuild/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ===================
 Kernel Build System
diff --git a/Documentation/kbuild/issues.rst b/Documentation/kbuild/issues.rst
index 9fdded4b681c..bdab01f733f6 100644
--- a/Documentation/kbuild/issues.rst
+++ b/Documentation/kbuild/issues.rst
@@ -1,11 +1,15 @@
-Recursion issue #1
-------------------
+================
+Recursion issues
+================
 
- .. include:: Kconfig.recursion-issue-01
-    :literal:
+issue #1
+--------
 
-Recursion issue #2
-------------------
+.. literalinclude:: Kconfig.recursion-issue-01
+   :language: kconfig
 
- .. include:: Kconfig.recursion-issue-02
-    :literal:
+issue #2
+--------
+
+.. literalinclude:: Kconfig.recursion-issue-02
+   :language: kconfig
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index b25548963d70..ce9b99c004ae 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -18,7 +18,7 @@ This file lists all modules that are built into the kernel. This is used
 by modprobe to not fail when trying to load something builtin.
 
 modules.builtin.modinfo
---------------------------------------------------
+-----------------------
 This file contains modinfo from all modules that are built into the kernel.
 Unlike modinfo of a separate module, all fields are prefixed with module name.
 
@@ -153,6 +153,7 @@ Install script called when using "make install".
 The default name is "installkernel".
 
 The script will be called with the following arguments:
+
    - $1 - kernel version
    - $2 - kernel image file
    - $3 - kernel map file
diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst
index 2bc8a7803365..74bef19f69f0 100644
--- a/Documentation/kbuild/kconfig-language.rst
+++ b/Documentation/kbuild/kconfig-language.rst
@@ -53,6 +53,7 @@ A menu entry can have a number of attributes. Not all of them are
 applicable everywhere (see syntax).
 
 - type definition: "bool"/"tristate"/"string"/"hex"/"int"
+
   Every config option must have a type. There are only two basic types:
   tristate and string; the other types are based on these two. The type
   definition optionally accepts an input prompt, so these two examples
@@ -66,11 +67,13 @@ applicable everywhere (see syntax).
 	prompt "Networking support"
 
 - input prompt: "prompt" <prompt> ["if" <expr>]
+
   Every menu entry can have at most one prompt, which is used to display
   to the user. Optionally dependencies only for this prompt can be added
   with "if".
 
 - default value: "default" <expr> ["if" <expr>]
+
   A config option can have any number of default values. If multiple
   default values are visible, only the first defined one is active.
   Default values are not limited to the menu entry where they are
@@ -112,6 +115,7 @@ applicable everywhere (see syntax).
   Optionally dependencies for this default value can be added with "if".
 
 - dependencies: "depends on" <expr>
+
   This defines a dependency for this menu entry. If multiple
   dependencies are defined, they are connected with '&&'. Dependencies
   are applied to all other options within this menu entry (which also
@@ -127,6 +131,7 @@ applicable everywhere (see syntax).
 	default y
 
 - reverse dependencies: "select" <symbol> ["if" <expr>]
+
   While normal dependencies reduce the upper limit of a symbol (see
   below), reverse dependencies can be used to force a lower limit of
   another symbol. The value of the current menu symbol is used as the
@@ -146,6 +151,7 @@ applicable everywhere (see syntax).
 	the illegal configurations all over.
 
 - weak reverse dependencies: "imply" <symbol> ["if" <expr>]
+
   This is similar to "select" as it enforces a lower limit on another
   symbol except that the "implied" symbol's value may still be set to n
   from a direct dependency or with a visible prompt.
@@ -176,6 +182,7 @@ applicable everywhere (see syntax).
   configure that subsystem out without also having to unset these drivers.
 
 - limiting menu display: "visible if" <expr>
+
   This attribute is only applicable to menu blocks, if the condition is
   false, the menu block is not displayed to the user (the symbols
   contained there can still be selected by other symbols, though). It is
@@ -183,12 +190,14 @@ applicable everywhere (see syntax).
   entries. Default value of "visible" is true.
 
 - numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
+
   This allows to limit the range of possible input values for int
   and hex symbols. The user can only input a value which is larger than
   or equal to the first symbol and smaller than or equal to the second
   symbol.
 
 - help text: "help" or "---help---"
+
   This defines a help text. The end of the help text is determined by
   the indentation level, this means it ends at the first line which has
   a smaller indentation than the first line of the help text.
@@ -197,6 +206,7 @@ applicable everywhere (see syntax).
   the file as an aid to developers.
 
 - misc options: "option" <symbol>[=<value>]
+
   Various less common options can be defined via this option syntax,
   which can modify the behaviour of the menu entry and its config
   symbol. These options are currently possible:
@@ -325,6 +335,7 @@ end a menu entry:
 The first five also start the definition of a menu entry.
 
 config::
+
 	"config" <symbol>
 	<config options>
 
@@ -332,6 +343,7 @@ This defines a config symbol <symbol> and accepts any of above
 attributes as options.
 
 menuconfig::
+
 	"menuconfig" <symbol>
 	<config options>
 
diff --git a/Documentation/kbuild/kconfig.rst b/Documentation/kbuild/kconfig.rst
index 88129af7e539..a9a855f894b3 100644
--- a/Documentation/kbuild/kconfig.rst
+++ b/Documentation/kbuild/kconfig.rst
@@ -264,6 +264,7 @@ NCONFIG_MODE
 This mode shows all sub-menus in one large tree.
 
 Example::
+
 	make NCONFIG_MODE=single_menu nconfig
 
 ----------------------------------------------------------------------
@@ -277,9 +278,12 @@ Searching in xconfig:
 	names, so you have to know something close to what you are
 	looking for.
 
-	Example:
+	Example::
+
 		Ctrl-F hotplug
-	or
+
+	or::
+
 		Menu: File, Search, hotplug
 
 	lists all config symbol entries that contain "hotplug" in
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index 093f2d79ab95..f31158457753 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -384,6 +384,7 @@ more details, with real examples.
 -----------------------
 
 	Kbuild tracks dependencies on the following:
+
 	1) All prerequisite files (both `*.c` and `*.h`)
 	2) `CONFIG_` options used in all prerequisite files
 	3) Command-line used to compile target
diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst
index dc698ea456e0..a8518ac0d31d 100644
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -1364,7 +1364,7 @@ Futex API reference
 Further reading
 ===============
 
--  ``Documentation/locking/spinlocks.txt``: Linus Torvalds' spinlocking
+-  ``Documentation/locking/spinlocks.rst``: Linus Torvalds' spinlocking
    tutorial in the kernel sources.
 
 -  Unix Systems for Modern Architectures: Symmetric Multiprocessing and
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 9885f7c1b75d..060f4e485897 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ====
 LEDs
diff --git a/Documentation/livepatch/index.rst b/Documentation/livepatch/index.rst
index edd291d51847..17674a9e21b2 100644
--- a/Documentation/livepatch/index.rst
+++ b/Documentation/livepatch/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ===================
 Kernel Livepatching
diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst
new file mode 100644
index 000000000000..626a463f7e42
--- /dev/null
+++ b/Documentation/locking/index.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+locking
+=======
+
+.. toctree::
+    :maxdepth: 1
+
+    lockdep-design
+    lockstat
+    locktorture
+    mutex-design
+    rt-mutex-design
+    rt-mutex
+    spinlocks
+    ww-mutex-design
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/locking/lockdep-design.txt b/Documentation/locking/lockdep-design.rst
index f189d130e543..23fcbc4d3fc0 100644
--- a/Documentation/locking/lockdep-design.txt
+++ b/Documentation/locking/lockdep-design.rst
@@ -2,6 +2,7 @@ Runtime locking correctness validator
 =====================================
 
 started by Ingo Molnar <mingo@redhat.com>
+
 additions by Arjan van de Ven <arjan@linux.intel.com>
 
 Lock-class
@@ -56,7 +57,7 @@ where the last 1 category is:
 
 When locking rules are violated, these usage bits are presented in the
 locking error messages, inside curlies, with a total of 2 * n STATEs bits.
-A contrived example:
+A contrived example::
 
    modprobe/2287 is trying to acquire lock:
     (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
@@ -70,12 +71,14 @@ of the lock and readlock (if exists), for each of the n STATEs listed
 above respectively, and the character displayed at each bit position
 indicates:
 
+   ===  ===================================================
    '.'  acquired while irqs disabled and not in irq context
    '-'  acquired in irq context
    '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
+   ===  ===================================================
 
-The bits are illustrated with an example:
+The bits are illustrated with an example::
 
     (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
                          ||||
@@ -90,13 +93,13 @@ context and whether that STATE is enabled yields four possible cases as
 shown in the table below. The bit character is able to indicate which
 exact case is for the lock as of the reporting time.
 
-   -------------------------------------------
+  +--------------+-------------+--------------+
   |              | irq enabled | irq disabled |
-  |-------------------------------------------|
+  +--------------+-------------+--------------+
   | ever in irq  |      ?      |       -      |
-  |-------------------------------------------|
+  +--------------+-------------+--------------+
   | never in irq |      +      |       .      |
-   -------------------------------------------
+  +--------------+-------------+--------------+
 
 The character '-' suggests irq is disabled because if otherwise the
 charactor '?' would have been shown instead. Similar deduction can be
@@ -113,7 +116,7 @@ is irq-unsafe means it was ever acquired with irq enabled.
 
 A softirq-unsafe lock-class is automatically hardirq-unsafe as well. The
 following states must be exclusive: only one of them is allowed to be set
-for any lock-class based on its usage:
+for any lock-class based on its usage::
 
  <hardirq-safe> or <hardirq-unsafe>
  <softirq-safe> or <softirq-unsafe>
@@ -134,7 +137,7 @@ Multi-lock dependency rules:
 The same lock-class must not be acquired twice, because this could lead
 to lock recursion deadlocks.
 
-Furthermore, two locks can not be taken in inverse order:
+Furthermore, two locks can not be taken in inverse order::
 
  <L1> -> <L2>
  <L2> -> <L1>
@@ -148,7 +151,7 @@ operations; the validator will still find whether these locks can be
 acquired in a circular fashion.
 
 Furthermore, the following usage based lock dependencies are not allowed
-between any two lock-classes:
+between any two lock-classes::
 
    <hardirq-safe>   ->  <hardirq-unsafe>
    <softirq-safe>   ->  <softirq-unsafe>
@@ -204,16 +207,16 @@ the ordering is not static.
 In order to teach the validator about this correct usage model, new
 versions of the various locking primitives were added that allow you to
 specify a "nesting level". An example call, for the block device mutex,
-looks like this:
+looks like this::
 
-enum bdev_bd_mutex_lock_class
-{
+  enum bdev_bd_mutex_lock_class
+  {
        BD_MUTEX_NORMAL,
        BD_MUTEX_WHOLE,
        BD_MUTEX_PARTITION
-};
+  };
 
- mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
+mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
 
 In this case the locking is done on a bdev object that is known to be a
 partition.
@@ -234,7 +237,7 @@ must be held: lockdep_assert_held*(&lock) and lockdep_*pin_lock(&lock).
 As the name suggests, lockdep_assert_held* family of macros assert that a
 particular lock is held at a certain time (and generate a WARN() otherwise).
 This annotation is largely used all over the kernel, e.g. kernel/sched/
-core.c
+core.c::
 
   void update_rq_clock(struct rq *rq)
   {
@@ -253,7 +256,7 @@ out to be especially helpful to debug code with callbacks, where an upper
 layer assumes a lock remains taken, but a lower layer thinks it can maybe drop
 and reacquire the lock ("unwittingly" introducing races). lockdep_pin_lock()
 returns a 'struct pin_cookie' that is then used by lockdep_unpin_lock() to check
-that nobody tampered with the lock, e.g. kernel/sched/sched.h
+that nobody tampered with the lock, e.g. kernel/sched/sched.h::
 
   static inline void rq_pin_lock(struct rq *rq, struct rq_flags *rf)
   {
@@ -280,7 +283,7 @@ correctness) in the sense that for every simple, standalone single-task
 locking sequence that occurred at least once during the lifetime of the
 kernel, the validator proves it with a 100% certainty that no
 combination and timing of these locking sequences can cause any class of
-lock related deadlock. [*]
+lock related deadlock. [1]_
 
 I.e. complex multi-CPU and multi-task locking scenarios do not have to
 occur in practice to prove a deadlock: only the simple 'component'
@@ -299,7 +302,9 @@ possible combination of locking interaction between CPUs, combined with
 every possible hardirq and softirq nesting scenario (which is impossible
 to do in practice).
 
-[*] assuming that the validator itself is 100% correct, and no other
+.. [1]
+
+    assuming that the validator itself is 100% correct, and no other
     part of the system corrupts the state of the validator in any way.
     We also assume that all NMI/SMM paths [which could interrupt
     even hardirq-disabled codepaths] are correct and do not interfere
@@ -310,7 +315,7 @@ to do in practice).
 Performance:
 ------------
 
-The above rules require _massive_ amounts of runtime checking. If we did
+The above rules require **massive** amounts of runtime checking. If we did
 that for every lock taken and for every irqs-enable event, it would
 render the system practically unusably slow. The complexity of checking
 is O(N^2), so even with just a few hundred lock-classes we'd have to do
@@ -369,17 +374,17 @@ be harder to do than to say.
 
 Of course, if you do run out of lock classes, the next thing to do is
 to find the offending lock classes.  First, the following command gives
-you the number of lock classes currently in use along with the maximum:
+you the number of lock classes currently in use along with the maximum::
 
 	grep "lock-classes" /proc/lockdep_stats
 
-This command produces the following output on a modest system:
+This command produces the following output on a modest system::
 
-	 lock-classes:                          748 [max: 8191]
+	lock-classes:                          748 [max: 8191]
 
 If the number allocated (748 above) increases continually over time,
 then there is likely a leak.  The following command can be used to
-identify the leaking lock classes:
+identify the leaking lock classes::
 
 	grep "BD" /proc/lockdep
 
diff --git a/Documentation/locking/lockstat.rst b/Documentation/locking/lockstat.rst
new file mode 100644
index 000000000000..536eab8dbd99
--- /dev/null
+++ b/Documentation/locking/lockstat.rst
@@ -0,0 +1,204 @@
+===============
+Lock Statistics
+===============
+
+What
+====
+
+As the name suggests, it provides statistics on locks.
+
+
+Why
+===
+
+Because things like lock contention can severely impact performance.
+
+How
+===
+
+Lockdep already has hooks in the lock functions and maps lock instances to
+lock classes. We build on that (see Documentation/locking/lockdep-design.rst).
+The graph below shows the relation between the lock functions and the various
+hooks therein::
+
+        __acquire
+            |
+           lock _____
+            |        \
+            |    __contended
+            |         |
+            |       <wait>
+            | _______/
+            |/
+            |
+       __acquired
+            |
+            .
+          <hold>
+            .
+            |
+       __release
+            |
+         unlock
+
+  lock, unlock	- the regular lock functions
+  __*		- the hooks
+  <> 		- states
+
+With these hooks we provide the following statistics:
+
+ con-bounces
+	- number of lock contention that involved x-cpu data
+ contentions
+	- number of lock acquisitions that had to wait
+ wait time
+     min
+	- shortest (non-0) time we ever had to wait for a lock
+     max
+	- longest time we ever had to wait for a lock
+     total
+	- total time we spend waiting on this lock
+     avg
+	- average time spent waiting on this lock
+ acq-bounces
+	- number of lock acquisitions that involved x-cpu data
+ acquisitions
+	- number of times we took the lock
+ hold time
+     min
+	- shortest (non-0) time we ever held the lock
+     max
+	- longest time we ever held the lock
+     total
+	- total time this lock was held
+     avg
+	- average time this lock was held
+
+These numbers are gathered per lock class, per read/write state (when
+applicable).
+
+It also tracks 4 contention points per class. A contention point is a call site
+that had to wait on lock acquisition.
+
+Configuration
+-------------
+
+Lock statistics are enabled via CONFIG_LOCK_STAT.
+
+Usage
+-----
+
+Enable collection of statistics::
+
+	# echo 1 >/proc/sys/kernel/lock_stat
+
+Disable collection of statistics::
+
+	# echo 0 >/proc/sys/kernel/lock_stat
+
+Look at the current lock statistics::
+
+  ( line numbers not part of actual output, done for clarity in the explanation
+    below )
+
+  # less /proc/lock_stat
+
+  01 lock_stat version 0.4
+  02-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  03                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
+  04-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  05
+  06                         &mm->mmap_sem-W:            46             84           0.26         939.10       16371.53         194.90          47291        2922365           0.16     2220301.69 17464026916.32        5975.99
+  07                         &mm->mmap_sem-R:            37            100           1.31      299502.61      325629.52        3256.30         212344       34316685           0.10        7744.91    95016910.20           2.77
+  08                         ---------------
+  09                           &mm->mmap_sem              1          [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
+  10                           &mm->mmap_sem             96          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  11                           &mm->mmap_sem             34          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  12                           &mm->mmap_sem             17          [<ffffffff81127e71>] vm_munmap+0x41/0x80
+  13                         ---------------
+  14                           &mm->mmap_sem              1          [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0
+  15                           &mm->mmap_sem             60          [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250
+  16                           &mm->mmap_sem             41          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  17                           &mm->mmap_sem             68          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  18
+  19.............................................................................................................................................................................................................................
+  20
+  21                         unix_table_lock:           110            112           0.21          49.24         163.91           1.46          21094          66312           0.12         624.42       31589.81           0.48
+  22                         ---------------
+  23                         unix_table_lock             45          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  24                         unix_table_lock             47          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  25                         unix_table_lock             15          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  26                         unix_table_lock              5          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+  27                         ---------------
+  28                         unix_table_lock             39          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  29                         unix_table_lock             49          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  30                         unix_table_lock             20          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  31                         unix_table_lock              4          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+
+
+This excerpt shows the first two lock class statistics. Line 01 shows the
+output version - each time the format changes this will be updated. Line 02-04
+show the header with column descriptions. Lines 05-18 and 20-31 show the actual
+statistics. These statistics come in two parts; the actual stats separated by a
+short separator (line 08, 13) from the contention points.
+
+Lines 09-12 show the first 4 recorded contention points (the code
+which tries to get the lock) and lines 14-17 show the first 4 recorded
+contended points (the lock holder). It is possible that the max
+con-bounces point is missing in the statistics.
+
+The first lock (05-18) is a read/write lock, and shows two lines above the
+short separator. The contention points don't match the column descriptors,
+they have two: contentions and [<IP>] symbol. The second set of contention
+points are the points we're contending with.
+
+The integer part of the time values is in us.
+
+Dealing with nested locks, subclasses may appear::
+
+  32...........................................................................................................................................................................................................................
+  33
+  34                               &rq->lock:       13128          13128           0.43         190.53      103881.26           7.91          97454        3453404           0.00         401.11    13224683.11           3.82
+  35                               ---------
+  36                               &rq->lock          645          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  37                               &rq->lock          297          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  38                               &rq->lock          360          [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a
+  39                               &rq->lock          428          [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb
+  40                               ---------
+  41                               &rq->lock           77          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  42                               &rq->lock          174          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  43                               &rq->lock         4715          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  44                               &rq->lock          893          [<ffffffff81340524>] schedule+0x157/0x7b8
+  45
+  46...........................................................................................................................................................................................................................
+  47
+  48                             &rq->lock/1:        1526          11488           0.33         388.73      136294.31          11.86          21461          38404           0.00          37.93      109388.53           2.84
+  49                             -----------
+  50                             &rq->lock/1        11526          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  51                             -----------
+  52                             &rq->lock/1         5645          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  53                             &rq->lock/1         1224          [<ffffffff81340524>] schedule+0x157/0x7b8
+  54                             &rq->lock/1         4336          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  55                             &rq->lock/1          181          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+
+Line 48 shows statistics for the second subclass (/1) of &rq->lock class
+(subclass starts from 0), since in this case, as line 50 suggests,
+double_rq_lock actually acquires a nested lock of two spinlocks.
+
+View the top contending locks::
+
+  # grep : /proc/lock_stat | head
+			clockevents_lock:       2926159        2947636           0.15       46882.81  1784540466.34         605.41        3381345        3879161           0.00        2260.97    53178395.68          13.71
+		     tick_broadcast_lock:        346460         346717           0.18        2257.43    39364622.71         113.54        3642919        4242696           0.00        2263.79    49173646.60          11.59
+		  &mapping->i_mmap_mutex:        203896         203899           3.36      645530.05 31767507988.39      155800.21        3361776        8893984           0.17        2254.15    14110121.02           1.59
+			       &rq->lock:        135014         136909           0.18         606.09      842160.68           6.15        1540728       10436146           0.00         728.72    17606683.41           1.69
+	       &(&zone->lru_lock)->rlock:         93000          94934           0.16          59.18      188253.78           1.98        1199912        3809894           0.15         391.40     3559518.81           0.93
+			 tasklist_lock-W:         40667          41130           0.23        1189.42      428980.51          10.43         270278         510106           0.16         653.51     3939674.91           7.72
+			 tasklist_lock-R:         21298          21305           0.20        1310.05      215511.12          10.12         186204         241258           0.14        1162.33     1179779.23           4.89
+			      rcu_node_1:         47656          49022           0.16         635.41      193616.41           3.95         844888        1865423           0.00         764.26     1656226.96           0.89
+       &(&dentry->d_lockref.lock)->rlock:         39791          40179           0.15        1302.08       88851.96           2.21        2790851       12527025           0.10        1910.75     3379714.27           0.27
+			      rcu_node_0:         29203          30064           0.16         786.55     1555573.00          51.74          88963         244254           0.00         398.87      428872.51           1.76
+
+Clear the statistics::
+
+  # echo 0 > /proc/lock_stat
diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt
deleted file mode 100644
index fdbeb0c45ef3..000000000000
--- a/Documentation/locking/lockstat.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-
-LOCK STATISTICS
-
-- WHAT
-
-As the name suggests, it provides statistics on locks.
-
-- WHY
-
-Because things like lock contention can severely impact performance.
-
-- HOW
-
-Lockdep already has hooks in the lock functions and maps lock instances to
-lock classes. We build on that (see Documentation/locking/lockdep-design.txt).
-The graph below shows the relation between the lock functions and the various
-hooks therein.
-
-        __acquire
-            |
-           lock _____
-            |        \
-            |    __contended
-            |         |
-            |       <wait>
-            | _______/
-            |/
-            |
-       __acquired
-            |
-            .
-          <hold>
-            .
-            |
-       __release
-            |
-         unlock
-
-lock, unlock	- the regular lock functions
-__*		- the hooks
-<> 		- states
-
-With these hooks we provide the following statistics:
-
- con-bounces       - number of lock contention that involved x-cpu data
- contentions       - number of lock acquisitions that had to wait
- wait time min     - shortest (non-0) time we ever had to wait for a lock
-           max     - longest time we ever had to wait for a lock
-	   total   - total time we spend waiting on this lock
-	   avg     - average time spent waiting on this lock
- acq-bounces       - number of lock acquisitions that involved x-cpu data
- acquisitions      - number of times we took the lock
- hold time min     - shortest (non-0) time we ever held the lock
-	   max     - longest time we ever held the lock
-	   total   - total time this lock was held
-	   avg     - average time this lock was held
-
-These numbers are gathered per lock class, per read/write state (when
-applicable).
-
-It also tracks 4 contention points per class. A contention point is a call site
-that had to wait on lock acquisition.
-
- - CONFIGURATION
-
-Lock statistics are enabled via CONFIG_LOCK_STAT.
-
- - USAGE
-
-Enable collection of statistics:
-
-# echo 1 >/proc/sys/kernel/lock_stat
-
-Disable collection of statistics:
-
-# echo 0 >/proc/sys/kernel/lock_stat
-
-Look at the current lock statistics:
-
-( line numbers not part of actual output, done for clarity in the explanation
-  below )
-
-# less /proc/lock_stat
-
-01 lock_stat version 0.4
-02-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-03                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
-04-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-05
-06                         &mm->mmap_sem-W:            46             84           0.26         939.10       16371.53         194.90          47291        2922365           0.16     2220301.69 17464026916.32        5975.99
-07                         &mm->mmap_sem-R:            37            100           1.31      299502.61      325629.52        3256.30         212344       34316685           0.10        7744.91    95016910.20           2.77
-08                         ---------------
-09                           &mm->mmap_sem              1          [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
-10                           &mm->mmap_sem             96          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
-11                           &mm->mmap_sem             34          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
-12                           &mm->mmap_sem             17          [<ffffffff81127e71>] vm_munmap+0x41/0x80
-13                         ---------------
-14                           &mm->mmap_sem              1          [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0
-15                           &mm->mmap_sem             60          [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250
-16                           &mm->mmap_sem             41          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
-17                           &mm->mmap_sem             68          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
-18
-19.............................................................................................................................................................................................................................
-20
-21                         unix_table_lock:           110            112           0.21          49.24         163.91           1.46          21094          66312           0.12         624.42       31589.81           0.48
-22                         ---------------
-23                         unix_table_lock             45          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
-24                         unix_table_lock             47          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
-25                         unix_table_lock             15          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
-26                         unix_table_lock              5          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
-27                         ---------------
-28                         unix_table_lock             39          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
-29                         unix_table_lock             49          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
-30                         unix_table_lock             20          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
-31                         unix_table_lock              4          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
-
-
-This excerpt shows the first two lock class statistics. Line 01 shows the
-output version - each time the format changes this will be updated. Line 02-04
-show the header with column descriptions. Lines 05-18 and 20-31 show the actual
-statistics. These statistics come in two parts; the actual stats separated by a
-short separator (line 08, 13) from the contention points.
-
-Lines 09-12 show the first 4 recorded contention points (the code
-which tries to get the lock) and lines 14-17 show the first 4 recorded
-contended points (the lock holder). It is possible that the max
-con-bounces point is missing in the statistics.
-
-The first lock (05-18) is a read/write lock, and shows two lines above the
-short separator. The contention points don't match the column descriptors,
-they have two: contentions and [<IP>] symbol. The second set of contention
-points are the points we're contending with.
-
-The integer part of the time values is in us.
-
-Dealing with nested locks, subclasses may appear:
-
-32...........................................................................................................................................................................................................................
-33
-34                               &rq->lock:       13128          13128           0.43         190.53      103881.26           7.91          97454        3453404           0.00         401.11    13224683.11           3.82
-35                               ---------
-36                               &rq->lock          645          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
-37                               &rq->lock          297          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-38                               &rq->lock          360          [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a
-39                               &rq->lock          428          [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb
-40                               ---------
-41                               &rq->lock           77          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
-42                               &rq->lock          174          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-43                               &rq->lock         4715          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
-44                               &rq->lock          893          [<ffffffff81340524>] schedule+0x157/0x7b8
-45
-46...........................................................................................................................................................................................................................
-47
-48                             &rq->lock/1:        1526          11488           0.33         388.73      136294.31          11.86          21461          38404           0.00          37.93      109388.53           2.84
-49                             -----------
-50                             &rq->lock/1        11526          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
-51                             -----------
-52                             &rq->lock/1         5645          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
-53                             &rq->lock/1         1224          [<ffffffff81340524>] schedule+0x157/0x7b8
-54                             &rq->lock/1         4336          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
-55                             &rq->lock/1          181          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-
-Line 48 shows statistics for the second subclass (/1) of &rq->lock class
-(subclass starts from 0), since in this case, as line 50 suggests,
-double_rq_lock actually acquires a nested lock of two spinlocks.
-
-View the top contending locks:
-
-# grep : /proc/lock_stat | head
-			clockevents_lock:       2926159        2947636           0.15       46882.81  1784540466.34         605.41        3381345        3879161           0.00        2260.97    53178395.68          13.71
-		     tick_broadcast_lock:        346460         346717           0.18        2257.43    39364622.71         113.54        3642919        4242696           0.00        2263.79    49173646.60          11.59
-		  &mapping->i_mmap_mutex:        203896         203899           3.36      645530.05 31767507988.39      155800.21        3361776        8893984           0.17        2254.15    14110121.02           1.59
-			       &rq->lock:        135014         136909           0.18         606.09      842160.68           6.15        1540728       10436146           0.00         728.72    17606683.41           1.69
-	       &(&zone->lru_lock)->rlock:         93000          94934           0.16          59.18      188253.78           1.98        1199912        3809894           0.15         391.40     3559518.81           0.93
-			 tasklist_lock-W:         40667          41130           0.23        1189.42      428980.51          10.43         270278         510106           0.16         653.51     3939674.91           7.72
-			 tasklist_lock-R:         21298          21305           0.20        1310.05      215511.12          10.12         186204         241258           0.14        1162.33     1179779.23           4.89
-			      rcu_node_1:         47656          49022           0.16         635.41      193616.41           3.95         844888        1865423           0.00         764.26     1656226.96           0.89
-       &(&dentry->d_lockref.lock)->rlock:         39791          40179           0.15        1302.08       88851.96           2.21        2790851       12527025           0.10        1910.75     3379714.27           0.27
-			      rcu_node_0:         29203          30064           0.16         786.55     1555573.00          51.74          88963         244254           0.00         398.87      428872.51           1.76
-
-Clear the statistics:
-
-# echo 0 > /proc/lock_stat
diff --git a/Documentation/locking/locktorture.txt b/Documentation/locking/locktorture.rst
index 6a8df4cd19bf..e79eeeca3ac6 100644
--- a/Documentation/locking/locktorture.txt
+++ b/Documentation/locking/locktorture.rst
@@ -1,6 +1,9 @@
+==================================
 Kernel Lock Torture Test Operation
+==================================
 
 CONFIG_LOCK_TORTURE_TEST
+========================
 
 The CONFIG LOCK_TORTURE_TEST config option provides a kernel module
 that runs torture tests on core kernel locking primitives. The kernel
@@ -18,61 +21,77 @@ can be simulated by either enlarging this critical region hold time and/or
 creating more kthreads.
 
 
-MODULE PARAMETERS
+Module Parameters
+=================
 
 This module has the following parameters:
 
 
-	    ** Locktorture-specific **
+Locktorture-specific
+--------------------
 
-nwriters_stress   Number of kernel threads that will stress exclusive lock
+nwriters_stress
+		  Number of kernel threads that will stress exclusive lock
 		  ownership (writers). The default value is twice the number
 		  of online CPUs.
 
-nreaders_stress   Number of kernel threads that will stress shared lock
+nreaders_stress
+		  Number of kernel threads that will stress shared lock
 		  ownership (readers). The default is the same amount of writer
 		  locks. If the user did not specify nwriters_stress, then
 		  both readers and writers be the amount of online CPUs.
 
-torture_type	  Type of lock to torture. By default, only spinlocks will
+torture_type
+		  Type of lock to torture. By default, only spinlocks will
 		  be tortured. This module can torture the following locks,
 		  with string values as follows:
 
-		     o "lock_busted": Simulates a buggy lock implementation.
+		     - "lock_busted":
+				Simulates a buggy lock implementation.
 
-		     o "spin_lock": spin_lock() and spin_unlock() pairs.
+		     - "spin_lock":
+				spin_lock() and spin_unlock() pairs.
 
-		     o "spin_lock_irq": spin_lock_irq() and spin_unlock_irq()
-					pairs.
+		     - "spin_lock_irq":
+				spin_lock_irq() and spin_unlock_irq() pairs.
 
-		     o "rw_lock": read/write lock() and unlock() rwlock pairs.
+		     - "rw_lock":
+				read/write lock() and unlock() rwlock pairs.
 
-		     o "rw_lock_irq": read/write lock_irq() and unlock_irq()
-				      rwlock pairs.
+		     - "rw_lock_irq":
+				read/write lock_irq() and unlock_irq()
+				rwlock pairs.
 
-		     o "mutex_lock": mutex_lock() and mutex_unlock() pairs.
+		     - "mutex_lock":
+				mutex_lock() and mutex_unlock() pairs.
 
-		     o "rtmutex_lock": rtmutex_lock() and rtmutex_unlock()
-				       pairs. Kernel must have CONFIG_RT_MUTEX=y.
+		     - "rtmutex_lock":
+				rtmutex_lock() and rtmutex_unlock() pairs.
+				Kernel must have CONFIG_RT_MUTEX=y.
 
-		     o "rwsem_lock": read/write down() and up() semaphore pairs.
+		     - "rwsem_lock":
+				read/write down() and up() semaphore pairs.
 
 
-	    ** Torture-framework (RCU + locking) **
+Torture-framework (RCU + locking)
+---------------------------------
 
-shutdown_secs	  The number of seconds to run the test before terminating
+shutdown_secs
+		  The number of seconds to run the test before terminating
 		  the test and powering off the system.  The default is
 		  zero, which disables test termination and system shutdown.
 		  This capability is useful for automated testing.
 
-onoff_interval	  The number of seconds between each attempt to execute a
+onoff_interval
+		  The number of seconds between each attempt to execute a
 		  randomly selected CPU-hotplug operation.  Defaults
 		  to zero, which disables CPU hotplugging.  In
 		  CONFIG_HOTPLUG_CPU=n kernels, locktorture will silently
 		  refuse to do any CPU-hotplug operations regardless of
 		  what value is specified for onoff_interval.
 
-onoff_holdoff	  The number of seconds to wait until starting CPU-hotplug
+onoff_holdoff
+		  The number of seconds to wait until starting CPU-hotplug
 		  operations.  This would normally only be used when
 		  locktorture was built into the kernel and started
 		  automatically at boot time, in which case it is useful
@@ -80,53 +99,59 @@ onoff_holdoff	  The number of seconds to wait until starting CPU-hotplug
 		  coming and going. This parameter is only useful if
 		  CONFIG_HOTPLUG_CPU is enabled.
 
-stat_interval	  Number of seconds between statistics-related printk()s.
+stat_interval
+		  Number of seconds between statistics-related printk()s.
 		  By default, locktorture will report stats every 60 seconds.
 		  Setting the interval to zero causes the statistics to
 		  be printed -only- when the module is unloaded, and this
 		  is the default.
 
-stutter		  The length of time to run the test before pausing for this
+stutter
+		  The length of time to run the test before pausing for this
 		  same period of time.  Defaults to "stutter=5", so as
 		  to run and pause for (roughly) five-second intervals.
 		  Specifying "stutter=0" causes the test to run continuously
 		  without pausing, which is the old default behavior.
 
-shuffle_interval  The number of seconds to keep the test threads affinitied
+shuffle_interval
+		  The number of seconds to keep the test threads affinitied
 		  to a particular subset of the CPUs, defaults to 3 seconds.
 		  Used in conjunction with test_no_idle_hz.
 
-verbose		  Enable verbose debugging printing, via printk(). Enabled
+verbose
+		  Enable verbose debugging printing, via printk(). Enabled
 		  by default. This extra information is mostly related to
 		  high-level errors and reports from the main 'torture'
 		  framework.
 
 
-STATISTICS
+Statistics
+==========
 
-Statistics are printed in the following format:
+Statistics are printed in the following format::
 
-spin_lock-torture: Writes:  Total: 93746064  Max/Min: 0/0   Fail: 0
-   (A)		    (B)		   (C)		  (D)	       (E)
+  spin_lock-torture: Writes:  Total: 93746064  Max/Min: 0/0   Fail: 0
+     (A)		    (B)		   (C)		  (D)	       (E)
 
-(A): Lock type that is being tortured -- torture_type parameter.
+  (A): Lock type that is being tortured -- torture_type parameter.
 
-(B): Number of writer lock acquisitions. If dealing with a read/write primitive
-     a second "Reads" statistics line is printed.
+  (B): Number of writer lock acquisitions. If dealing with a read/write
+       primitive a second "Reads" statistics line is printed.
 
-(C): Number of times the lock was acquired.
+  (C): Number of times the lock was acquired.
 
-(D): Min and max number of times threads failed to acquire the lock.
+  (D): Min and max number of times threads failed to acquire the lock.
 
-(E): true/false values if there were errors acquiring the lock. This should
-     -only- be positive if there is a bug in the locking primitive's
-     implementation. Otherwise a lock should never fail (i.e., spin_lock()).
-     Of course, the same applies for (C), above. A dummy example of this is
-     the "lock_busted" type.
+  (E): true/false values if there were errors acquiring the lock. This should
+       -only- be positive if there is a bug in the locking primitive's
+       implementation. Otherwise a lock should never fail (i.e., spin_lock()).
+       Of course, the same applies for (C), above. A dummy example of this is
+       the "lock_busted" type.
 
-USAGE
+Usage
+=====
 
-The following script may be used to torture locks:
+The following script may be used to torture locks::
 
 	#!/bin/sh
 
diff --git a/Documentation/locking/mutex-design.txt b/Documentation/locking/mutex-design.rst
index 818aca19612f..4d8236b81fa5 100644
--- a/Documentation/locking/mutex-design.txt
+++ b/Documentation/locking/mutex-design.rst
@@ -1,6 +1,9 @@
+=======================
 Generic Mutex Subsystem
+=======================
 
 started by Ingo Molnar <mingo@redhat.com>
+
 updated by Davidlohr Bueso <davidlohr@hp.com>
 
 What are mutexes?
@@ -23,7 +26,7 @@ Implementation
 Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h
 and implemented in kernel/locking/mutex.c. These locks use an atomic variable
 (->owner) to keep track of the lock state during its lifetime.  Field owner
-actually contains 'struct task_struct *' to the current lock owner and it is
+actually contains `struct task_struct *` to the current lock owner and it is
 therefore NULL if not currently owned. Since task_struct pointers are aligned
 at at least L1_CACHE_BYTES, low bits (3) are used to store extra state (e.g.,
 if waiter list is non-empty).  In its most basic form it also includes a
@@ -101,29 +104,36 @@ features that make lock debugging easier and faster:
 
 Interfaces
 ----------
-Statically define the mutex:
+Statically define the mutex::
+
    DEFINE_MUTEX(name);
 
-Dynamically initialize the mutex:
+Dynamically initialize the mutex::
+
    mutex_init(mutex);
 
-Acquire the mutex, uninterruptible:
+Acquire the mutex, uninterruptible::
+
    void mutex_lock(struct mutex *lock);
    void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
    int  mutex_trylock(struct mutex *lock);
 
-Acquire the mutex, interruptible:
+Acquire the mutex, interruptible::
+
    int mutex_lock_interruptible_nested(struct mutex *lock,
 				       unsigned int subclass);
    int mutex_lock_interruptible(struct mutex *lock);
 
-Acquire the mutex, interruptible, if dec to 0:
+Acquire the mutex, interruptible, if dec to 0::
+
    int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
 
-Unlock the mutex:
+Unlock the mutex::
+
    void mutex_unlock(struct mutex *lock);
 
-Test if the mutex is taken:
+Test if the mutex is taken::
+
    int mutex_is_locked(struct mutex *lock);
 
 Disadvantages
diff --git a/Documentation/locking/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.rst
index 3d7b865539cc..59c2a64efb21 100644
--- a/Documentation/locking/rt-mutex-design.txt
+++ b/Documentation/locking/rt-mutex-design.rst
@@ -1,14 +1,15 @@
-#
-# Copyright (c) 2006 Steven Rostedt
-# Licensed under the GNU Free Documentation License, Version 1.2
-#
-
+==============================
 RT-mutex implementation design
-------------------------------
+==============================
+
+Copyright (c) 2006 Steven Rostedt
+
+Licensed under the GNU Free Documentation License, Version 1.2
+
 
 This document tries to describe the design of the rtmutex.c implementation.
 It doesn't describe the reasons why rtmutex.c exists. For that please see
-Documentation/locking/rt-mutex.txt.  Although this document does explain problems
+Documentation/locking/rt-mutex.rst.  Although this document does explain problems
 that happen without this code, but that is in the concept to understand
 what the code actually is doing.
 
@@ -41,17 +42,17 @@ to release the lock, because for all we know, B is a CPU hog and will
 never give C a chance to release the lock.  This is called unbounded priority
 inversion.
 
-Here's a little ASCII art to show the problem.
+Here's a little ASCII art to show the problem::
 
-   grab lock L1 (owned by C)
-     |
-A ---+
-        C preempted by B
-          |
-C    +----+
+     grab lock L1 (owned by C)
+       |
+  A ---+
+          C preempted by B
+            |
+  C    +----+
 
-B         +-------->
-                B now keeps A from running.
+  B         +-------->
+                  B now keeps A from running.
 
 
 Priority Inheritance (PI)
@@ -75,24 +76,29 @@ Terminology
 Here I explain some terminology that is used in this document to help describe
 the design that is used to implement PI.
 
-PI chain - The PI chain is an ordered series of locks and processes that cause
+PI chain
+         - The PI chain is an ordered series of locks and processes that cause
            processes to inherit priorities from a previous process that is
            blocked on one of its locks.  This is described in more detail
            later in this document.
 
-mutex    - In this document, to differentiate from locks that implement
+mutex
+         - In this document, to differentiate from locks that implement
            PI and spin locks that are used in the PI code, from now on
            the PI locks will be called a mutex.
 
-lock     - In this document from now on, I will use the term lock when
+lock
+         - In this document from now on, I will use the term lock when
            referring to spin locks that are used to protect parts of the PI
            algorithm.  These locks disable preemption for UP (when
            CONFIG_PREEMPT is enabled) and on SMP prevents multiple CPUs from
            entering critical sections simultaneously.
 
-spin lock - Same as lock above.
+spin lock
+         - Same as lock above.
 
-waiter   - A waiter is a struct that is stored on the stack of a blocked
+waiter
+         - A waiter is a struct that is stored on the stack of a blocked
            process.  Since the scope of the waiter is within the code for
            a process being blocked on the mutex, it is fine to allocate
            the waiter on the process's stack (local variable).  This
@@ -104,14 +110,18 @@ waiter   - A waiter is a struct that is stored on the stack of a blocked
            waiter is sometimes used in reference to the task that is waiting
            on a mutex. This is the same as waiter->task.
 
-waiters  - A list of processes that are blocked on a mutex.
+waiters
+         - A list of processes that are blocked on a mutex.
 
-top waiter - The highest priority process waiting on a specific mutex.
+top waiter
+         - The highest priority process waiting on a specific mutex.
 
-top pi waiter - The highest priority process waiting on one of the mutexes
+top pi waiter
+              - The highest priority process waiting on one of the mutexes
                 that a specific process owns.
 
-Note:  task and process are used interchangeably in this document, mostly to
+Note:
+       task and process are used interchangeably in this document, mostly to
        differentiate between two processes that are being described together.
 
 
@@ -123,7 +133,7 @@ inheritance to take place.  Multiple chains may converge, but a chain
 would never diverge, since a process can't be blocked on more than one
 mutex at a time.
 
-Example:
+Example::
 
    Process:  A, B, C, D, E
    Mutexes:  L1, L2, L3, L4
@@ -137,21 +147,21 @@ Example:
                          D owns L4
                                 E blocked on L4
 
-The chain would be:
+The chain would be::
 
    E->L4->D->L3->C->L2->B->L1->A
 
 To show where two chains merge, we could add another process F and
 another mutex L5 where B owns L5 and F is blocked on mutex L5.
 
-The chain for F would be:
+The chain for F would be::
 
    F->L5->B->L1->A
 
 Since a process may own more than one mutex, but never be blocked on more than
 one, the chains merge.
 
-Here we show both chains:
+Here we show both chains::
 
    E->L4->D->L3->C->L2-+
                        |
@@ -165,12 +175,12 @@ than the processes to the left or below in the chain.
 
 Also since a mutex may have more than one process blocked on it, we can
 have multiple chains merge at mutexes.  If we add another process G that is
-blocked on mutex L2:
+blocked on mutex L2::
 
   G->L2->B->L1->A
 
 And once again, to show how this can grow I will show the merging chains
-again.
+again::
 
    E->L4->D->L3->C-+
                    +->L2-+
@@ -184,7 +194,7 @@ the chain (A and B in this example), must have their priorities increased
 to that of G.
 
 Mutex Waiters Tree
------------------
+------------------
 
 Every mutex keeps track of all the waiters that are blocked on itself. The
 mutex has a rbtree to store these waiters by priority.  This tree is protected
@@ -219,19 +229,19 @@ defined.  But is very complex to figure it out, since it depends on all
 the nesting of mutexes.  Let's look at the example where we have 3 mutexes,
 L1, L2, and L3, and four separate functions func1, func2, func3 and func4.
 The following shows a locking order of L1->L2->L3, but may not actually
-be directly nested that way.
+be directly nested that way::
 
-void func1(void)
-{
+  void func1(void)
+  {
 	mutex_lock(L1);
 
 	/* do anything */
 
 	mutex_unlock(L1);
-}
+  }
 
-void func2(void)
-{
+  void func2(void)
+  {
 	mutex_lock(L1);
 	mutex_lock(L2);
 
@@ -239,10 +249,10 @@ void func2(void)
 
 	mutex_unlock(L2);
 	mutex_unlock(L1);
-}
+  }
 
-void func3(void)
-{
+  void func3(void)
+  {
 	mutex_lock(L2);
 	mutex_lock(L3);
 
@@ -250,30 +260,30 @@ void func3(void)
 
 	mutex_unlock(L3);
 	mutex_unlock(L2);
-}
+  }
 
-void func4(void)
-{
+  void func4(void)
+  {
 	mutex_lock(L3);
 
 	/* do something again */
 
 	mutex_unlock(L3);
-}
+  }
 
 Now we add 4 processes that run each of these functions separately.
 Processes A, B, C, and D which run functions func1, func2, func3 and func4
 respectively, and such that D runs first and A last.  With D being preempted
-in func4 in the "do something again" area, we have a locking that follows:
+in func4 in the "do something again" area, we have a locking that follows::
 
-D owns L3
-       C blocked on L3
-       C owns L2
-              B blocked on L2
-              B owns L1
-                     A blocked on L1
+  D owns L3
+         C blocked on L3
+         C owns L2
+                B blocked on L2
+                B owns L1
+                       A blocked on L1
 
-And thus we have the chain A->L1->B->L2->C->L3->D.
+  And thus we have the chain A->L1->B->L2->C->L3->D.
 
 This gives us a PI depth of 4 (four processes), but looking at any of the
 functions individually, it seems as though they only have at most a locking
@@ -298,7 +308,7 @@ not true, the rtmutex.c code will be broken!), this allows for the least
 significant bit to be used as a flag.  Bit 0 is used as the "Has Waiters"
 flag. It's set whenever there are waiters on a mutex.
 
-See Documentation/locking/rt-mutex.txt for further details.
+See Documentation/locking/rt-mutex.rst for further details.
 
 cmpxchg Tricks
 --------------
@@ -307,17 +317,17 @@ Some architectures implement an atomic cmpxchg (Compare and Exchange).  This
 is used (when applicable) to keep the fast path of grabbing and releasing
 mutexes short.
 
-cmpxchg is basically the following function performed atomically:
+cmpxchg is basically the following function performed atomically::
 
-unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
-{
+  unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
+  {
 	unsigned long T = *A;
 	if (*A == *B) {
 		*A = *C;
 	}
 	return T;
-}
-#define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)
+  }
+  #define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)
 
 This is really nice to have, since it allows you to only update a variable
 if the variable is what you expect it to be.  You know if it succeeded if
@@ -352,9 +362,10 @@ Then rt_mutex_setprio is called to adjust the priority of the task to the
 new priority. Note that rt_mutex_setprio is defined in kernel/sched/core.c
 to implement the actual change in priority.
 
-(Note:  For the "prio" field in task_struct, the lower the number, the
+Note:
+	For the "prio" field in task_struct, the lower the number, the
 	higher the priority. A "prio" of 5 is of higher priority than a
-	"prio" of 10.)
+	"prio" of 10.
 
 It is interesting to note that rt_mutex_adjust_prio can either increase
 or decrease the priority of the task.  In the case that a higher priority
@@ -439,6 +450,7 @@ wait_lock, which this code currently holds. So setting the "Has Waiters" flag
 forces the current owner to synchronize with this code.
 
 The lock is taken if the following are true:
+
    1) The lock has no owner
    2) The current task is the highest priority against all other
       waiters of the lock
@@ -546,10 +558,13 @@ Credits
 -------
 
 Author:  Steven Rostedt <rostedt@goodmis.org>
+
 Updated: Alex Shi <alex.shi@linaro.org>	- 7/6/2017
 
-Original Reviewers:  Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and
+Original Reviewers:
+		     Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and
 		     Randy Dunlap
+
 Update (7/6/2017) Reviewers: Steven Rostedt and Sebastian Siewior
 
 Updates
diff --git a/Documentation/locking/rt-mutex.txt b/Documentation/locking/rt-mutex.rst
index 35793e003041..c365dc302081 100644
--- a/Documentation/locking/rt-mutex.txt
+++ b/Documentation/locking/rt-mutex.rst
@@ -1,5 +1,6 @@
+==================================
 RT-mutex subsystem with PI support
-----------------------------------
+==================================
 
 RT-mutexes with priority inheritance are used to support PI-futexes,
 which enable pthread_mutex_t priority inheritance attributes
@@ -46,27 +47,30 @@ The state of the rt-mutex is tracked via the owner field of the rt-mutex
 structure:
 
 lock->owner holds the task_struct pointer of the owner. Bit 0 is used to
-keep track of the "lock has waiters" state.
+keep track of the "lock has waiters" state:
 
- owner        bit0
+ ============ ======= ================================================
+ owner        bit0    Notes
+ ============ ======= ================================================
  NULL         0       lock is free (fast acquire possible)
  NULL         1       lock is free and has waiters and the top waiter
-			is going to take the lock*
+		      is going to take the lock [1]_
  taskpointer  0       lock is held (fast release possible)
- taskpointer  1       lock is held and has waiters**
+ taskpointer  1       lock is held and has waiters [2]_
+ ============ ======= ================================================
 
 The fast atomic compare exchange based acquire and release is only
 possible when bit 0 of lock->owner is 0.
 
-(*) It also can be a transitional state when grabbing the lock
-with ->wait_lock is held. To prevent any fast path cmpxchg to the lock,
-we need to set the bit0 before looking at the lock, and the owner may be
-NULL in this small time, hence this can be a transitional state.
+.. [1] It also can be a transitional state when grabbing the lock
+       with ->wait_lock is held. To prevent any fast path cmpxchg to the lock,
+       we need to set the bit0 before looking at the lock, and the owner may
+       be NULL in this small time, hence this can be a transitional state.
 
-(**) There is a small time when bit 0 is set but there are no
-waiters. This can happen when grabbing the lock in the slow path.
-To prevent a cmpxchg of the owner releasing the lock, we need to
-set this bit before looking at the lock.
+.. [2] There is a small time when bit 0 is set but there are no
+       waiters. This can happen when grabbing the lock in the slow path.
+       To prevent a cmpxchg of the owner releasing the lock, we need to
+       set this bit before looking at the lock.
 
 BTW, there is still technically a "Pending Owner", it's just not called
 that anymore. The pending owner happens to be the top_waiter of a lock
diff --git a/Documentation/locking/spinlocks.txt b/Documentation/locking/spinlocks.rst
index ff35e40bdf5b..098107fb7d86 100644
--- a/Documentation/locking/spinlocks.txt
+++ b/Documentation/locking/spinlocks.rst
@@ -1,8 +1,13 @@
+===============
+Locking lessons
+===============
+
 Lesson 1: Spin locks
+====================
 
-The most basic primitive for locking is spinlock.
+The most basic primitive for locking is spinlock::
 
-static DEFINE_SPINLOCK(xxx_lock);
+  static DEFINE_SPINLOCK(xxx_lock);
 
 	unsigned long flags;
 
@@ -19,23 +24,25 @@ worry about UP vs SMP issues: the spinlocks work correctly under both.
    NOTE! Implications of spin_locks for memory are further described in:
 
      Documentation/memory-barriers.txt
+
        (5) LOCK operations.
+
        (6) UNLOCK operations.
 
 The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
 lot more complex and even slower and is usually worth it only for
-sequences that you _know_ need to be split up: avoid it at all cost if you
+sequences that you **know** need to be split up: avoid it at all cost if you
 aren't sure).
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
 before, because you have to make sure the spinlocks correctly protect the
-shared data structures _everywhere_ they are used. The spinlocks are most
+shared data structures **everywhere** they are used. The spinlocks are most
 easily added to places that are completely independent of other code (for
 example, internal driver data structures that nobody else ever touches).
 
-   NOTE! The spin-lock is safe only when you _also_ use the lock itself
+   NOTE! The spin-lock is safe only when you **also** use the lock itself
    to do locking across CPU's, which implies that EVERYTHING that
    touches a shared variable has to agree about the spinlock they want
    to use.
@@ -43,6 +50,7 @@ example, internal driver data structures that nobody else ever touches).
 ----
 
 Lesson 2: reader-writer spinlocks.
+==================================
 
 If your data accesses have a very natural pattern where you usually tend
 to mostly read from the shared variables, the reader-writer locks
@@ -54,7 +62,7 @@ to change the variables it has to get an exclusive write lock.
    simple spinlocks.  Unless the reader critical section is long, you
    are better off just using spinlocks.
 
-The routines look the same as above:
+The routines look the same as above::
 
    rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock);
 
@@ -71,7 +79,7 @@ The routines look the same as above:
 The above kind of lock may be useful for complex data structures like
 linked lists, especially searching for entries without changing the list
 itself.  The read lock allows many concurrent readers.  Anything that
-_changes_ the list will have to get the write lock.
+**changes** the list will have to get the write lock.
 
    NOTE! RCU is better for list traversal, but requires careful
    attention to design detail (see Documentation/RCU/listRCU.txt).
@@ -87,10 +95,11 @@ to get the write-lock at the very beginning.
 ----
 
 Lesson 3: spinlocks revisited.
+==============================
 
 The single spin-lock primitives above are by no means the only ones. They
 are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are slower
+but partly **because** they are safe they are also fairly slow. They are slower
 than they'd need to be, because they do have to disable interrupts
 (which is just a single instruction on a x86, but it's an expensive one -
 and on other architectures it can be worse).
@@ -98,7 +107,7 @@ and on other architectures it can be worse).
 If you have a case where you have to protect a data structure across
 several CPU's and you want to use spinlocks you can potentially use
 cheaper versions of the spinlocks. IFF you know that the spinlocks are
-never used in interrupt handlers, you can use the non-irq versions:
+never used in interrupt handlers, you can use the non-irq versions::
 
 	spin_lock(&lock);
 	...
@@ -110,7 +119,7 @@ This is useful if you know that the data in question is only ever
 manipulated from a "process context", ie no interrupts involved.
 
 The reasons you mustn't use these versions if you have interrupts that
-play with the spinlock is that you can get deadlocks:
+play with the spinlock is that you can get deadlocks::
 
 	spin_lock(&lock);
 	...
@@ -147,9 +156,10 @@ indeed), while write-locks need to protect themselves against interrupts.
 ----
 
 Reference information:
+======================
 
 For dynamic initialization, use spin_lock_init() or rwlock_init() as
-appropriate:
+appropriate::
 
    spinlock_t xxx_lock;
    rwlock_t xxx_rw_lock;
diff --git a/Documentation/locking/ww-mutex-design.txt b/Documentation/locking/ww-mutex-design.rst
index f0ed7c30e695..1846c199da23 100644
--- a/Documentation/locking/ww-mutex-design.txt
+++ b/Documentation/locking/ww-mutex-design.rst
@@ -1,3 +1,4 @@
+======================================
 Wound/Wait Deadlock-Proof Mutex Design
 ======================================
 
@@ -85,6 +86,7 @@ Furthermore there are three different class of w/w lock acquire functions:
   no deadlock potential and hence the ww_mutex_lock call will block and not
   prematurely return -EDEADLK. The advantage of the _slow functions is in
   interface safety:
+
   - ww_mutex_lock has a __must_check int return type, whereas ww_mutex_lock_slow
     has a void return type. Note that since ww mutex code needs loops/retries
     anyway the __must_check doesn't result in spurious warnings, even though the
@@ -115,36 +117,36 @@ expect the number of simultaneous competing transactions to be typically small,
 and you want to reduce the number of rollbacks.
 
 Three different ways to acquire locks within the same w/w class. Common
-definitions for methods #1 and #2:
+definitions for methods #1 and #2::
 
-static DEFINE_WW_CLASS(ww_class);
+  static DEFINE_WW_CLASS(ww_class);
 
-struct obj {
+  struct obj {
 	struct ww_mutex lock;
 	/* obj data */
-};
+  };
 
-struct obj_entry {
+  struct obj_entry {
 	struct list_head head;
 	struct obj *obj;
-};
+  };
 
 Method 1, using a list in execbuf->buffers that's not allowed to be reordered.
 This is useful if a list of required objects is already tracked somewhere.
 Furthermore the lock helper can use propagate the -EALREADY return code back to
 the caller as a signal that an object is twice on the list. This is useful if
 the list is constructed from userspace input and the ABI requires userspace to
-not have duplicate entries (e.g. for a gpu commandbuffer submission ioctl).
+not have duplicate entries (e.g. for a gpu commandbuffer submission ioctl)::
 
-int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj *res_obj = NULL;
 	struct obj_entry *contended_entry = NULL;
 	struct obj_entry *entry;
 
 	ww_acquire_init(ctx, &ww_class);
 
-retry:
+  retry:
 	list_for_each_entry (entry, list, head) {
 		if (entry->obj == res_obj) {
 			res_obj = NULL;
@@ -160,7 +162,7 @@ retry:
 	ww_acquire_done(ctx);
 	return 0;
 
-err:
+  err:
 	list_for_each_entry_continue_reverse (entry, list, head)
 		ww_mutex_unlock(&entry->obj->lock);
 
@@ -176,14 +178,14 @@ err:
 	ww_acquire_fini(ctx);
 
 	return ret;
-}
+  }
 
 Method 2, using a list in execbuf->buffers that can be reordered. Same semantics
 of duplicate entry detection using -EALREADY as method 1 above. But the
-list-reordering allows for a bit more idiomatic code.
+list-reordering allows for a bit more idiomatic code::
 
-int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj_entry *entry, *entry2;
 
 	ww_acquire_init(ctx, &ww_class);
@@ -216,24 +218,25 @@ int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
 
 	ww_acquire_done(ctx);
 	return 0;
-}
+  }
 
-Unlocking works the same way for both methods #1 and #2:
+Unlocking works the same way for both methods #1 and #2::
 
-void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj_entry *entry;
 
 	list_for_each_entry (entry, list, head)
 		ww_mutex_unlock(&entry->obj->lock);
 
 	ww_acquire_fini(ctx);
-}
+  }
 
 Method 3 is useful if the list of objects is constructed ad-hoc and not upfront,
 e.g. when adjusting edges in a graph where each node has its own ww_mutex lock,
 and edges can only be changed when holding the locks of all involved nodes. w/w
 mutexes are a natural fit for such a case for two reasons:
+
 - They can handle lock-acquisition in any order which allows us to start walking
   a graph from a starting point and then iteratively discovering new edges and
   locking down the nodes those edges connect to.
@@ -243,6 +246,7 @@ mutexes are a natural fit for such a case for two reasons:
   as a starting point).
 
 Note that this approach differs in two important ways from the above methods:
+
 - Since the list of objects is dynamically constructed (and might very well be
   different when retrying due to hitting the -EDEADLK die condition) there's
   no need to keep any object on a persistent list when it's not locked. We can
@@ -260,17 +264,17 @@ any interface misuse for these cases.
 
 Also, method 3 can't fail the lock acquisition step since it doesn't return
 -EALREADY. Of course this would be different when using the _interruptible
-variants, but that's outside of the scope of these examples here.
+variants, but that's outside of the scope of these examples here::
 
-struct obj {
+  struct obj {
 	struct ww_mutex ww_mutex;
 	struct list_head locked_list;
-};
+  };
 
-static DEFINE_WW_CLASS(ww_class);
+  static DEFINE_WW_CLASS(ww_class);
 
-void __unlock_objs(struct list_head *list)
-{
+  void __unlock_objs(struct list_head *list)
+  {
 	struct obj *entry, *temp;
 
 	list_for_each_entry_safe (entry, temp, list, locked_list) {
@@ -279,15 +283,15 @@ void __unlock_objs(struct list_head *list)
 		list_del(&entry->locked_list);
 		ww_mutex_unlock(entry->ww_mutex)
 	}
-}
+  }
 
-void lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj *obj;
 
 	ww_acquire_init(ctx, &ww_class);
 
-retry:
+  retry:
 	/* re-init loop start state */
 	loop {
 		/* magic code which walks over a graph and decides which objects
@@ -312,13 +316,13 @@ retry:
 
 	ww_acquire_done(ctx);
 	return 0;
-}
+  }
 
-void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	__unlock_objs(list);
 	ww_acquire_fini(ctx);
-}
+  }
 
 Method 4: Only lock one single objects. In that case deadlock detection and
 prevention is obviously overkill, since with grabbing just one lock you can't
@@ -329,11 +333,14 @@ Implementation Details
 ----------------------
 
 Design:
+^^^^^^^
+
   ww_mutex currently encapsulates a struct mutex, this means no extra overhead for
   normal mutex locks, which are far more common. As such there is only a small
   increase in code size if wait/wound mutexes are not used.
 
   We maintain the following invariants for the wait list:
+
   (1) Waiters with an acquire context are sorted by stamp order; waiters
       without an acquire context are interspersed in FIFO order.
   (2) For Wait-Die, among waiters with contexts, only the first one can have
@@ -355,6 +362,8 @@ Design:
   therefore be directed towards the uncontended cases.
 
 Lockdep:
+^^^^^^^^
+
   Special care has been taken to warn for as many cases of api abuse
   as possible. Some common api abuses will be caught with
   CONFIG_DEBUG_MUTEXES, but CONFIG_PROVE_LOCKING is recommended.
@@ -379,5 +388,6 @@ Lockdep:
      having called ww_acquire_fini on the first.
    - 'normal' deadlocks that can occur.
 
-FIXME: Update this section once we have the TASK_DEADLOCK task state flag magic
-implemented.
+FIXME:
+  Update this section once we have the TASK_DEADLOCK task state flag magic
+  implemented.
diff --git a/Documentation/m68k/index.rst b/Documentation/m68k/index.rst
new file mode 100644
index 000000000000..3a5ba7fe1703
--- /dev/null
+++ b/Documentation/m68k/index.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+m68k Architecture
+=================
+
+.. toctree::
+   :maxdepth: 2
+
+   kernel-options
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.rst
index 79d21246c75a..cabd9419740d 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.rst
@@ -1,22 +1,24 @@
-
-
-				  Command Line Options for Linux/m68k
-				  ===================================
+===================================
+Command Line Options for Linux/m68k
+===================================
 
 Last Update: 2 May 1999
+
 Linux/m68k version: 2.2.6
+
 Author: Roman.Hodek@informatik.uni-erlangen.de (Roman Hodek)
+
 Update: jds@kom.auc.dk (Jes Sorensen) and faq@linux-m68k.org (Chris Lawrence)
 
 0) Introduction
 ===============
 
-  Often I've been asked which command line options the Linux/m68k
+Often I've been asked which command line options the Linux/m68k
 kernel understands, or how the exact syntax for the ... option is, or
 ... about the option ... . I hope, this document supplies all the
 answers...
 
-  Note that some options might be outdated, their descriptions being
+Note that some options might be outdated, their descriptions being
 incomplete or missing. Please update the information and send in the
 patches.
 
@@ -38,11 +40,11 @@ argument contains an '=', it is of class 2, and the definition is put
 into init's environment. All other arguments are passed to init as
 command line options.
 
-  This document describes the valid kernel options for Linux/m68k in
+This document describes the valid kernel options for Linux/m68k in
 the version mentioned at the start of this file. Later revisions may
 add new such options, and some may be missing in older versions.
 
-  In general, the value (the part after the '=') of an option is a
+In general, the value (the part after the '=') of an option is a
 list of values separated by commas. The interpretation of these values
 is up to the driver that "owns" the option. This association of
 options with drivers is also the reason that some are further
@@ -55,21 +57,21 @@ subdivided.
 2.1) root=
 ----------
 
-Syntax: root=/dev/<device>
-    or: root=<hex_number>
+:Syntax: root=/dev/<device>
+:or:     root=<hex_number>
 
 This tells the kernel which device it should mount as the root
 filesystem. The device must be a block device with a valid filesystem
 on it.
 
-  The first syntax gives the device by name. These names are converted
+The first syntax gives the device by name. These names are converted
 into a major/minor number internally in the kernel in an unusual way.
 Normally, this "conversion" is done by the device files in /dev, but
 this isn't possible here, because the root filesystem (with /dev)
 isn't mounted yet... So the kernel parses the name itself, with some
 hardcoded name to number mappings. The name must always be a
 combination of two or three letters, followed by a decimal number.
-Valid names are:
+Valid names are::
 
   /dev/ram: -> 0x0100 (initial ramdisk)
   /dev/hda: -> 0x0300 (first IDE disk)
@@ -81,7 +83,7 @@ Valid names are:
   /dev/sde: -> 0x0840 (fifth SCSI disk)
   /dev/fd : -> 0x0200 (floppy disk)
 
-  The name must be followed by a decimal number, that stands for the
+The name must be followed by a decimal number, that stands for the
 partition number. Internally, the value of the number is just
 added to the device number mentioned in the table above. The
 exceptions are /dev/ram and /dev/fd, where /dev/ram refers to an
@@ -100,12 +102,12 @@ the kernel command line.
 
 [Strange and maybe uninteresting stuff ON]
 
-  This unusual translation of device names has some strange
+This unusual translation of device names has some strange
 consequences: If, for example, you have a symbolic link from /dev/fd
 to /dev/fd0D720 as an abbreviation for floppy driver #0 in DD format,
 you cannot use this name for specifying the root device, because the
 kernel cannot see this symlink before mounting the root FS and it
-isn't in the table above. If you use it, the root device will not be 
+isn't in the table above. If you use it, the root device will not be
 set at all, without an error message. Another example: You cannot use a
 partition on e.g. the sixth SCSI disk as the root filesystem, if you
 want to specify it by name. This is, because only the devices up to
@@ -118,7 +120,7 @@ knowledge that each disk uses 16 minors, and write "root=/dev/sde17"
 
 [Strange and maybe uninteresting stuff OFF]
 
-  If the device containing your root partition isn't in the table
+If the device containing your root partition isn't in the table
 above, you can also specify it by major and minor numbers. These are
 written in hex, with no prefix and no separator between. E.g., if you
 have a CD with contents appropriate as a root filesystem in the first
@@ -136,6 +138,7 @@ known partition UUID as the starting point.  For example,
 if partition 5 of the device has the UUID of
 00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as
 follows:
+
   PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2
 
 Authoritative information can be found in
@@ -145,8 +148,8 @@ Authoritative information can be found in
 2.2) ro, rw
 -----------
 
-Syntax: ro
-    or: rw
+:Syntax: ro
+:or:     rw
 
 These two options tell the kernel whether it should mount the root
 filesystem read-only or read-write. The default is read-only, except
@@ -156,7 +159,7 @@ for ramdisks, which default to read-write.
 2.3) debug
 ----------
 
-Syntax: debug
+:Syntax: debug
 
 This raises the kernel log level to 10 (the default is 7). This is the
 same level as set by the "dmesg" command, just that the maximum level
@@ -166,7 +169,7 @@ selectable by dmesg is 8.
 2.4) debug=
 -----------
 
-Syntax: debug=<device>
+:Syntax: debug=<device>
 
 This option causes certain kernel messages be printed to the selected
 debugging device. This can aid debugging the kernel, since the
@@ -175,7 +178,7 @@ devices are possible depends on the machine type. There are no checks
 for the validity of the device name. If the device isn't implemented,
 nothing happens.
 
-  Messages logged this way are in general stack dumps after kernel
+Messages logged this way are in general stack dumps after kernel
 memory faults or bad kernel traps, and kernel panics. To be exact: all
 messages of level 0 (panic messages) and all messages printed while
 the log level is 8 or more (their level doesn't matter). Before stack
@@ -185,19 +188,27 @@ at least 8 can also be set by the "debug" command line option (see
 
 Devices possible for Amiga:
 
- - "ser": built-in serial port; parameters: 9600bps, 8N1
- - "mem": Save the messages to a reserved area in chip mem. After
+ - "ser":
+	  built-in serial port; parameters: 9600bps, 8N1
+ - "mem":
+	  Save the messages to a reserved area in chip mem. After
           rebooting, they can be read under AmigaOS with the tool
           'dmesg'.
 
 Devices possible for Atari:
 
- - "ser1": ST-MFP serial port ("Modem1"); parameters: 9600bps, 8N1
- - "ser2": SCC channel B serial port ("Modem2"); parameters: 9600bps, 8N1
- - "ser" : default serial port
+ - "ser1":
+	   ST-MFP serial port ("Modem1"); parameters: 9600bps, 8N1
+ - "ser2":
+	   SCC channel B serial port ("Modem2"); parameters: 9600bps, 8N1
+ - "ser" :
+	   default serial port
            This is "ser2" for a Falcon, and "ser1" for any other machine
- - "midi": The MIDI port; parameters: 31250bps, 8N1
- - "par" : parallel port
+ - "midi":
+	   The MIDI port; parameters: 31250bps, 8N1
+ - "par" :
+	   parallel port
+
            The printing routine for this implements a timeout for the
            case there's no printer connected (else the kernel would
            lock up). The timeout is not exact, but usually a few
@@ -205,26 +216,29 @@ Devices possible for Atari:
 
 
 2.6) ramdisk_size=
--------------
+------------------
 
-Syntax: ramdisk_size=<size>
+:Syntax: ramdisk_size=<size>
 
-  This option instructs the kernel to set up a ramdisk of the given
+This option instructs the kernel to set up a ramdisk of the given
 size in KBytes. Do not use this option if the ramdisk contents are
 passed by bootstrap! In this case, the size is selected automatically
 and should not be overwritten.
 
-  The only application is for root filesystems on floppy disks, that
+The only application is for root filesystems on floppy disks, that
 should be loaded into memory. To do that, select the corresponding
 size of the disk as ramdisk size, and set the root device to the disk
 drive (with "root=").
 
 
 2.7) swap=
+
+  I can't find any sign of this option in 2.2.6.
+
 2.8) buff=
 -----------
 
-  I can't find any sign of these options in 2.2.6.
+  I can't find any sign of this option in 2.2.6.
 
 
 3) General Device Options (Amiga and Atari)
@@ -233,13 +247,13 @@ drive (with "root=").
 3.1) ether=
 -----------
 
-Syntax: ether=[<irq>[,<base_addr>[,<mem_start>[,<mem_end>]]]],<dev-name>
+:Syntax: ether=[<irq>[,<base_addr>[,<mem_start>[,<mem_end>]]]],<dev-name>
 
-  <dev-name> is the name of a net driver, as specified in
+<dev-name> is the name of a net driver, as specified in
 drivers/net/Space.c in the Linux source. Most prominent are eth0, ...
 eth3, sl0, ... sl3, ppp0, ..., ppp3, dummy, and lo.
 
-  The non-ethernet drivers (sl, ppp, dummy, lo) obviously ignore the
+The non-ethernet drivers (sl, ppp, dummy, lo) obviously ignore the
 settings by this options. Also, the existing ethernet drivers for
 Linux/m68k (ariadne, a2065, hydra) don't use them because Zorro boards
 are really Plug-'n-Play, so the "ether=" option is useless altogether
@@ -249,9 +263,9 @@ for Linux/m68k.
 3.2) hd=
 --------
 
-Syntax: hd=<cylinders>,<heads>,<sectors>
+:Syntax: hd=<cylinders>,<heads>,<sectors>
 
-  This option sets the disk geometry of an IDE disk. The first hd=
+This option sets the disk geometry of an IDE disk. The first hd=
 option is for the first IDE disk, the second for the second one.
 (I.e., you can give this option twice.) In most cases, you won't have
 to use this option, since the kernel can obtain the geometry data
@@ -262,9 +276,9 @@ disks.
 3.3) max_scsi_luns=
 -------------------
 
-Syntax: max_scsi_luns=<n>
+:Syntax: max_scsi_luns=<n>
 
-  Sets the maximum number of LUNs (logical units) of SCSI devices to
+Sets the maximum number of LUNs (logical units) of SCSI devices to
 be scanned. Valid values for <n> are between 1 and 8. Default is 8 if
 "Probe all LUNs on each SCSI device" was selected during the kernel
 configuration, else 1.
@@ -273,9 +287,9 @@ configuration, else 1.
 3.4) st=
 --------
 
-Syntax: st=<buffer_size>,[<write_thres>,[<max_buffers>]]
+:Syntax: st=<buffer_size>,[<write_thres>,[<max_buffers>]]
 
-  Sets several parameters of the SCSI tape driver. <buffer_size> is
+Sets several parameters of the SCSI tape driver. <buffer_size> is
 the number of 512-byte buffers reserved for tape operations for each
 device. <write_thres> sets the number of blocks which must be filled
 to start an actual write operation to the tape. Maximum value is the
@@ -286,9 +300,9 @@ buffers allocated for all tape devices.
 3.5) dmasound=
 --------------
 
-Syntax: dmasound=[<buffers>,<buffer-size>[,<catch-radius>]]
+:Syntax: dmasound=[<buffers>,<buffer-size>[,<catch-radius>]]
 
-  This option controls some configurations of the Linux/m68k DMA sound
+This option controls some configurations of the Linux/m68k DMA sound
 driver (Amiga and Atari): <buffers> is the number of buffers you want
 to use (minimum 4, default 4), <buffer-size> is the size of each
 buffer in kilobytes (minimum 4, default 32) and <catch-radius> says
@@ -305,20 +319,22 @@ don't need to expand the sound.
 4.1) video=
 -----------
 
-Syntax: video=<fbname>:<sub-options...>
+:Syntax: video=<fbname>:<sub-options...>
 
 The <fbname> parameter specifies the name of the frame buffer,
-eg. most atari users will want to specify `atafb' here. The
+eg. most atari users will want to specify `atafb` here. The
 <sub-options> is a comma-separated list of the sub-options listed
 below.
 
-NB: Please notice that this option was renamed from `atavideo' to
-    `video' during the development of the 1.3.x kernels, thus you
+NB:
+    Please notice that this option was renamed from `atavideo` to
+    `video` during the development of the 1.3.x kernels, thus you
     might need to update your boot-scripts if upgrading to 2.x from
     an 1.2.x kernel.
 
-NBB: The behavior of video= was changed in 2.1.57 so the recommended
-option is to specify the name of the frame buffer.
+NBB:
+    The behavior of video= was changed in 2.1.57 so the recommended
+    option is to specify the name of the frame buffer.
 
 4.1.1) Video Mode
 -----------------
@@ -341,11 +357,11 @@ mode, if the hardware allows. Currently defined names are:
  - falh2           : 896x608x1, Falcon only
  - falh16          : 896x608x4, Falcon only
 
-  If no video mode is given on the command line, the kernel tries the
+If no video mode is given on the command line, the kernel tries the
 modes names "default<n>" in turn, until one is possible with the
 hardware in use.
 
-  A video mode setting doesn't make sense, if the external driver is
+A video mode setting doesn't make sense, if the external driver is
 activated by a "external:" sub-option.
 
 4.1.2) inverse
@@ -358,17 +374,17 @@ option, you can make the background white.
 4.1.3) font
 -----------
 
-Syntax: font:<fontname>
+:Syntax: font:<fontname>
 
 Specify the font to use in text modes. Currently you can choose only
-between `VGA8x8', `VGA8x16' and `PEARL8x8'. `VGA8x8' is default, if the
+between `VGA8x8`, `VGA8x16` and `PEARL8x8`. `VGA8x8` is default, if the
 vertical size of the display is less than 400 pixel rows. Otherwise, the
-`VGA8x16' font is the default.
+`VGA8x16` font is the default.
 
-4.1.4) hwscroll_
-----------------
+4.1.4) `hwscroll_`
+------------------
 
-Syntax: hwscroll_<n>
+:Syntax: `hwscroll_<n>`
 
 The number of additional lines of video memory to reserve for
 speeding up the scrolling ("hardware scrolling"). Hardware scrolling
@@ -378,7 +394,7 @@ possible with plain STs and graphics cards (The former because the
 base address must be on a 256 byte boundary there, the latter because
 the kernel doesn't know how to set the base address at all.)
 
-  By default, <n> is set to the number of visible text lines on the
+By default, <n> is set to the number of visible text lines on the
 display. Thus, the amount of video memory is doubled, compared to no
 hardware scrolling. You can turn off the hardware scrolling altogether
 by setting <n> to 0.
@@ -386,31 +402,31 @@ by setting <n> to 0.
 4.1.5) internal:
 ----------------
 
-Syntax: internal:<xres>;<yres>[;<xres_max>;<yres_max>;<offset>]
+:Syntax: internal:<xres>;<yres>[;<xres_max>;<yres_max>;<offset>]
 
 This option specifies the capabilities of some extended internal video
 hardware, like e.g. OverScan. <xres> and <yres> give the (extended)
 dimensions of the screen.
 
-  If your OverScan needs a black border, you have to write the last
+If your OverScan needs a black border, you have to write the last
 three arguments of the "internal:". <xres_max> is the maximum line
 length the hardware allows, <yres_max> the maximum number of lines.
 <offset> is the offset of the visible part of the screen memory to its
 physical start, in bytes.
 
-  Often, extended interval video hardware has to be activated somehow.
+Often, extended interval video hardware has to be activated somehow.
 For this, see the "sw_*" options below.
 
 4.1.6) external:
 ----------------
 
-Syntax:
-  external:<xres>;<yres>;<depth>;<org>;<scrmem>[;<scrlen>[;<vgabase>\
-           [;<colw>[;<coltype>[;<xres_virtual>]]]]]
+:Syntax:
+  external:<xres>;<yres>;<depth>;<org>;<scrmem>[;<scrlen>[;<vgabase>
+  [;<colw>[;<coltype>[;<xres_virtual>]]]]]
 
-[I had to break this line...]
+.. I had to break this line...
 
-  This is probably the most complicated parameter... It specifies that
+This is probably the most complicated parameter... It specifies that
 you have some external video hardware (a graphics board), and how to
 use it under Linux/m68k. The kernel cannot know more about the hardware
 than you tell it here! The kernel also is unable to set or change any
@@ -418,38 +434,44 @@ video modes, since it doesn't know about any board internal. So, you
 have to switch to that video mode before you start Linux, and cannot
 switch to another mode once Linux has started.
 
-  The first 3 parameters of this sub-option should be obvious: <xres>,
+The first 3 parameters of this sub-option should be obvious: <xres>,
 <yres> and <depth> give the dimensions of the screen and the number of
 planes (depth). The depth is the logarithm to base 2 of the number
 of colors possible. (Or, the other way round: The number of colors is
 2^depth).
 
-  You have to tell the kernel furthermore how the video memory is
+You have to tell the kernel furthermore how the video memory is
 organized. This is done by a letter as <org> parameter:
 
- 'n': "normal planes", i.e. one whole plane after another
- 'i': "interleaved planes", i.e. 16 bit of the first plane, than 16 bit
+ 'n':
+      "normal planes", i.e. one whole plane after another
+ 'i':
+      "interleaved planes", i.e. 16 bit of the first plane, than 16 bit
       of the next, and so on... This mode is used only with the
-	  built-in Atari video modes, I think there is no card that
-	  supports this mode.
- 'p': "packed pixels", i.e. <depth> consecutive bits stand for all
-	  planes of one pixel; this is the most common mode for 8 planes
-	  (256 colors) on graphic cards
- 't': "true color" (more or less packed pixels, but without a color
-	  lookup table); usually depth is 24
+      built-in Atari video modes, I think there is no card that
+      supports this mode.
+ 'p':
+      "packed pixels", i.e. <depth> consecutive bits stand for all
+      planes of one pixel; this is the most common mode for 8 planes
+      (256 colors) on graphic cards
+ 't':
+      "true color" (more or less packed pixels, but without a color
+      lookup table); usually depth is 24
 
 For monochrome modes (i.e., <depth> is 1), the <org> letter has a
 different meaning:
 
- 'n': normal colors, i.e. 0=white, 1=black
- 'i': inverted colors, i.e. 0=black, 1=white
+ 'n':
+      normal colors, i.e. 0=white, 1=black
+ 'i':
+      inverted colors, i.e. 0=black, 1=white
 
-  The next important information about the video hardware is the base
+The next important information about the video hardware is the base
 address of the video memory. That is given in the <scrmem> parameter,
 as a hexadecimal number with a "0x" prefix. You have to find out this
 address in the documentation of your hardware.
 
-  The next parameter, <scrlen>, tells the kernel about the size of the
+The next parameter, <scrlen>, tells the kernel about the size of the
 video memory. If it's missing, the size is calculated from <xres>,
 <yres>, and <depth>. For now, it is not useful to write a value here.
 It would be used only for hardware scrolling (which isn't possible
@@ -460,7 +482,7 @@ empty, either by ending the "external:" after the video address or by
 writing two consecutive semicolons, if you want to give a <vgabase>
 (it is allowed to leave this parameter empty).
 
-  The <vgabase> parameter is optional. If it is not given, the kernel
+The <vgabase> parameter is optional. If it is not given, the kernel
 cannot read or write any color registers of the video hardware, and
 thus you have to set appropriate colors before you start Linux. But if
 your card is somehow VGA compatible, you can tell the kernel the base
@@ -472,18 +494,18 @@ uses the addresses vgabase+0x3c7...vgabase+0x3c9. The <vgabase>
 parameter is written in hexadecimal with a "0x" prefix, just as
 <scrmem>.
 
-  <colw> is meaningful only if <vgabase> is specified. It tells the
+<colw> is meaningful only if <vgabase> is specified. It tells the
 kernel how wide each of the color register is, i.e. the number of bits
 per single color (red/green/blue). Default is 6, another quite usual
 value is 8.
 
-  Also <coltype> is used together with <vgabase>. It tells the kernel
+Also <coltype> is used together with <vgabase>. It tells the kernel
 about the color register model of your gfx board. Currently, the types
 "vga" (which is also the default) and "mv300" (SANG MV300) are
 implemented.
 
-  Parameter <xres_virtual> is required for ProMST or ET4000 cards where
-the physical linelength differs from the visible length. With ProMST, 
+Parameter <xres_virtual> is required for ProMST or ET4000 cards where
+the physical linelength differs from the visible length. With ProMST,
 xres_virtual must be set to 2048. For ET4000, xres_virtual depends on the
 initialisation of the video-card.
 If you're missing a corresponding yres_virtual: the external part is legacy,
@@ -499,13 +521,13 @@ currently works only with the ScreenWonder!
 4.1.8) monitorcap:
 -------------------
 
-Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
+:Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
 
 This describes the capabilities of a multisync monitor. Don't use it
 with a fixed-frequency monitor! For now, only the Falcon frame buffer
 uses the settings of "monitorcap:".
 
-  <vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
+<vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
 your monitor can work with, in Hz. <hmin> and <hmax> are the same for
 the horizontal frequency, in kHz.
 
@@ -520,28 +542,28 @@ If this option is given, the framebuffer device doesn't do any video
 mode calculations and settings on its own. The only Atari fb device
 that does this currently is the Falcon.
 
-  What you reach with this: Settings for unknown video extensions
+What you reach with this: Settings for unknown video extensions
 aren't overridden by the driver, so you can still use the mode found
 when booting, when the driver doesn't know to set this mode itself.
 But this also means, that you can't switch video modes anymore...
 
-  An example where you may want to use "keep" is the ScreenBlaster for
+An example where you may want to use "keep" is the ScreenBlaster for
 the Falcon.
 
 
 4.2) atamouse=
 --------------
 
-Syntax: atamouse=<x-threshold>,[<y-threshold>]
+:Syntax: atamouse=<x-threshold>,[<y-threshold>]
 
-  With this option, you can set the mouse movement reporting threshold.
+With this option, you can set the mouse movement reporting threshold.
 This is the number of pixels of mouse movement that have to accumulate
 before the IKBD sends a new mouse packet to the kernel. Higher values
 reduce the mouse interrupt load and thus reduce the chance of keyboard
 overruns. Lower values give a slightly faster mouse responses and
 slightly better mouse tracking.
 
-  You can set the threshold in x and y separately, but usually this is
+You can set the threshold in x and y separately, but usually this is
 of little practical use. If there's just one number in the option, it
 is used for both dimensions. The default value is 2 for both
 thresholds.
@@ -550,7 +572,7 @@ thresholds.
 4.3) ataflop=
 -------------
 
-Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
+:Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
 
    The drive type may be 0, 1, or 2, for DD, HD, and ED, resp. This
    setting affects how many buffers are reserved and which formats are
@@ -563,15 +585,15 @@ Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
    no for the Medusa and yes for all others.
 
    With the two following parameters, you can change the default
-   steprate used for drive A and B, resp. 
+   steprate used for drive A and B, resp.
 
 
 4.4) atascsi=
 -------------
 
-Syntax: atascsi=<can_queue>[,<cmd_per_lun>[,<scat-gat>[,<host-id>[,<tagged>]]]]
+:Syntax: atascsi=<can_queue>[,<cmd_per_lun>[,<scat-gat>[,<host-id>[,<tagged>]]]]
 
-  This option sets some parameters for the Atari native SCSI driver.
+This option sets some parameters for the Atari native SCSI driver.
 Generally, any number of arguments can be omitted from the end. And
 for each of the numbers, a negative value means "use default". The
 defaults depend on whether TT-style or Falcon-style SCSI is used.
@@ -597,11 +619,14 @@ ignored (others aren't affected).
     32). Default: 8/1. (Note: Values > 1 seem to cause problems on a
     Falcon, cause not yet known.)
 
-      The <cmd_per_lun> value at a great part determines the amount of
+    The <cmd_per_lun> value at a great part determines the amount of
     memory SCSI reserves for itself. The formula is rather
     complicated, but I can give you some hints:
-      no scatter-gather  : cmd_per_lun * 232 bytes
-      full scatter-gather: cmd_per_lun * approx. 17 Kbytes
+
+      no scatter-gather:
+	cmd_per_lun * 232 bytes
+      full scatter-gather:
+	cmd_per_lun * approx. 17 Kbytes
 
   <scat-gat>:
     Size of the scatter-gather table, i.e. the number of requests
@@ -634,19 +659,23 @@ ignored (others aren't affected).
 4.5 switches=
 -------------
 
-Syntax: switches=<list of switches>
+:Syntax: switches=<list of switches>
 
-  With this option you can switch some hardware lines that are often
+With this option you can switch some hardware lines that are often
 used to enable/disable certain hardware extensions. Examples are
 OverScan, overclocking, ...
 
-  The <list of switches> is a comma-separated list of the following
+The <list of switches> is a comma-separated list of the following
 items:
 
-  ikbd: set RTS of the keyboard ACIA high
-  midi: set RTS of the MIDI ACIA high
-  snd6: set bit 6 of the PSG port A
-  snd7: set bit 6 of the PSG port A
+  ikbd:
+	set RTS of the keyboard ACIA high
+  midi:
+	set RTS of the MIDI ACIA high
+  snd6:
+	set bit 6 of the PSG port A
+  snd7:
+	set bit 6 of the PSG port A
 
 It doesn't make sense to mention a switch more than once (no
 difference to only once), but you can give as many switches as you
@@ -654,16 +683,16 @@ want to enable different features. The switch lines are set as early
 as possible during kernel initialization (even before determining the
 present hardware.)
 
-  All of the items can also be prefixed with "ov_", i.e. "ov_ikbd",
-"ov_midi", ... These options are meant for switching on an OverScan
+All of the items can also be prefixed with `ov_`, i.e. `ov_ikbd`,
+`ov_midi`, ... These options are meant for switching on an OverScan
 video extension. The difference to the bare option is that the
 switch-on is done after video initialization, and somehow synchronized
 to the HBLANK. A speciality is that ov_ikbd and ov_midi are switched
 off before rebooting, so that OverScan is disabled and TOS boots
 correctly.
 
-  If you give an option both, with and without the "ov_" prefix, the
-earlier initialization ("ov_"-less) takes precedence. But the
+If you give an option both, with and without the `ov_` prefix, the
+earlier initialization (`ov_`-less) takes precedence. But the
 switching-off on reset still happens in this case.
 
 5) Options for Amiga Only:
@@ -672,10 +701,10 @@ switching-off on reset still happens in this case.
 5.1) video=
 -----------
 
-Syntax: video=<fbname>:<sub-options...>
+:Syntax: video=<fbname>:<sub-options...>
 
 The <fbname> parameter specifies the name of the frame buffer, valid
-options are `amifb', `cyber', 'virge', `retz3' and `clgen', provided
+options are `amifb`, `cyber`, 'virge', `retz3` and `clgen`, provided
 that the respective frame buffer devices have been compiled into the
 kernel (or compiled as loadable modules). The behavior of the <fbname>
 option was changed in 2.1.57 so it is now recommended to specify this
@@ -697,9 +726,11 @@ predefined video modes are available:
 NTSC modes:
  - ntsc            : 640x200, 15 kHz, 60 Hz
  - ntsc-lace       : 640x400, 15 kHz, 60 Hz interlaced
+
 PAL modes:
  - pal             : 640x256, 15 kHz, 50 Hz
  - pal-lace        : 640x512, 15 kHz, 50 Hz interlaced
+
 ECS modes:
  - multiscan       : 640x480, 29 kHz, 57 Hz
  - multiscan-lace  : 640x960, 29 kHz, 57 Hz interlaced
@@ -715,6 +746,7 @@ ECS modes:
  - dblpal-lace     : 640x1024, 27 kHz, 47 Hz interlaced
  - dblntsc         : 640x200, 27 kHz, 57 Hz doublescan
  - dblpal          : 640x256, 27 kHz, 47 Hz doublescan
+
 VGA modes:
  - vga             : 640x480, 31 kHz, 60 Hz
  - vga70           : 640x400, 31 kHz, 70 Hz
@@ -726,7 +758,7 @@ chipset and 8-bit color for the AGA chipset.
 5.1.2) depth
 ------------
 
-Syntax: depth:<nr. of bit-planes>
+:Syntax: depth:<nr. of bit-planes>
 
 Specify the number of bit-planes for the selected video-mode.
 
@@ -739,32 +771,32 @@ Use inverted display (black on white). Functionally the same as the
 5.1.4) font
 -----------
 
-Syntax: font:<fontname>
+:Syntax: font:<fontname>
 
 Specify the font to use in text modes. Functionally the same as the
-"font" sub-option for the Atari, except that `PEARL8x8' is used instead
-of `VGA8x8' if the vertical size of the display is less than 400 pixel
+"font" sub-option for the Atari, except that `PEARL8x8` is used instead
+of `VGA8x8` if the vertical size of the display is less than 400 pixel
 rows.
 
 5.1.5) monitorcap:
 -------------------
 
-Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
+:Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
 
 This describes the capabilities of a multisync monitor. For now, only
 the color frame buffer uses the settings of "monitorcap:".
 
-  <vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
+<vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
 your monitor can work with, in Hz. <hmin> and <hmax> are the same for
 the horizontal frequency, in kHz.
 
-  The defaults are 50;90;15;38 (Generic Amiga multisync monitor).
+The defaults are 50;90;15;38 (Generic Amiga multisync monitor).
 
 
 5.2) fd_def_df0=
 ----------------
 
-Syntax: fd_def_df0=<value>
+:Syntax: fd_def_df0=<value>
 
 Sets the df0 value for "silent" floppy drives. The value should be in
 hexadecimal with "0x" prefix.
@@ -773,7 +805,7 @@ hexadecimal with "0x" prefix.
 5.3) wd33c93=
 -------------
 
-Syntax: wd33c93=<sub-options...>
+:Syntax: wd33c93=<sub-options...>
 
 These options affect the A590/A2091, A3000 and GVP Series II SCSI
 controllers.
@@ -784,9 +816,9 @@ below.
 5.3.1) nosync
 -------------
 
-Syntax: nosync:bitmask
+:Syntax: nosync:bitmask
 
-  bitmask is a byte where the 1st 7 bits correspond with the 7
+bitmask is a byte where the 1st 7 bits correspond with the 7
 possible SCSI devices. Set a bit to prevent sync negotiation on that
 device. To maintain backwards compatibility, a command-line such as
 "wd33c93=255" will be automatically translated to
@@ -796,35 +828,35 @@ all devices, eg. nosync:0xff.
 5.3.2) period
 -------------
 
-Syntax: period:ns
+:Syntax: period:ns
 
-  `ns' is the minimum # of nanoseconds in a SCSI data transfer
+`ns` is the minimum # of nanoseconds in a SCSI data transfer
 period. Default is 500; acceptable values are 250 - 1000.
 
 5.3.3) disconnect
 -----------------
 
-Syntax: disconnect:x
+:Syntax: disconnect:x
 
-  Specify x = 0 to never allow disconnects, 2 to always allow them.
+Specify x = 0 to never allow disconnects, 2 to always allow them.
 x = 1 does 'adaptive' disconnects, which is the default and generally
 the best choice.
 
 5.3.4) debug
 ------------
 
-Syntax: debug:x
+:Syntax: debug:x
 
-  If `DEBUGGING_ON' is defined, x is a bit mask that causes various
+If `DEBUGGING_ON` is defined, x is a bit mask that causes various
 types of debug output to printed - see the DB_xxx defines in
 wd33c93.h.
 
 5.3.5) clock
 ------------
 
-Syntax: clock:x
+:Syntax: clock:x
 
-  x = clock input in MHz for WD33c93 chip. Normal values would be from
+x = clock input in MHz for WD33c93 chip. Normal values would be from
 8 through 20. The default value depends on your hostadapter(s),
 default for the A3000 internal controller is 14, for the A2091 it's 8
 and for the GVP hostadapters it's either 8 or 14, depending on the
@@ -834,15 +866,15 @@ hostadapters.
 5.3.6) next
 -----------
 
-  No argument. Used to separate blocks of keywords when there's more
+No argument. Used to separate blocks of keywords when there's more
 than one wd33c93-based host adapter in the system.
 
 5.3.7) nodma
 ------------
 
-Syntax: nodma:x
+:Syntax: nodma:x
 
-  If x is 1 (or if the option is just written as "nodma"), the WD33c93
+If x is 1 (or if the option is just written as "nodma"), the WD33c93
 controller will not use DMA (= direct memory access) to access the
 Amiga's memory.  This is useful for some systems (like A3000's and
 A4000's with the A3640 accelerator, revision 3.0) that have problems
@@ -853,32 +885,27 @@ possible.
 5.4) gvp11=
 -----------
 
-Syntax: gvp11=<addr-mask>
+:Syntax: gvp11=<addr-mask>
 
-  The earlier versions of the GVP driver did not handle DMA
+The earlier versions of the GVP driver did not handle DMA
 address-mask settings correctly which made it necessary for some
 people to use this option, in order to get their GVP controller
 running under Linux. These problems have hopefully been solved and the
 use of this option is now highly unrecommended!
 
-  Incorrect use can lead to unpredictable behavior, so please only use
+Incorrect use can lead to unpredictable behavior, so please only use
 this option if you *know* what you are doing and have a reason to do
 so. In any case if you experience problems and need to use this
 option, please inform us about it by mailing to the Linux/68k kernel
 mailing list.
 
-  The address mask set by this option specifies which addresses are
+The address mask set by this option specifies which addresses are
 valid for DMA with the GVP Series II SCSI controller. An address is
 valid, if no bits are set except the bits that are set in the mask,
 too.
 
-  Some versions of the GVP can only DMA into a 24 bit address range,
+Some versions of the GVP can only DMA into a 24 bit address range,
 some can address a 25 bit address range while others can use the whole
 32 bit address range for DMA. The correct setting depends on your
 controller and should be autodetected by the driver. An example is the
 24 bit region which is specified by a mask of 0x00fffffe.
-
-
-/* Local Variables: */
-/* mode: text       */
-/* End:             */
diff --git a/Documentation/mic/index.rst b/Documentation/mic/index.rst
index 082fa8f6a260..3a8d06367ef1 100644
--- a/Documentation/mic/index.rst
+++ b/Documentation/mic/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 =============================================
 Intel Many Integrated Core (MIC) architecture
 =============================================
diff --git a/Documentation/netlabel/index.rst b/Documentation/netlabel/index.rst
index 47f1e0e5acd1..984e1b191b12 100644
--- a/Documentation/netlabel/index.rst
+++ b/Documentation/netlabel/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ========
 NetLabel
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 48c79e78817b..df33674799b5 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -2287,7 +2287,7 @@ addr_scope_policy - INTEGER
 
 
 /proc/sys/net/core/*
-	Please see: Documentation/sysctl/net.txt for descriptions of these entries.
+	Please see: Documentation/admin-guide/sysctl/net.rst for descriptions of these entries.
 
 
 /proc/sys/net/unix/*
diff --git a/Documentation/pcmcia/index.rst b/Documentation/pcmcia/index.rst
index 779c8527109e..7ae1f62fca14 100644
--- a/Documentation/pcmcia/index.rst
+++ b/Documentation/pcmcia/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ======
 pcmcia
diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt
index b154f6c0c36e..c33ba2befbf8 100644
--- a/Documentation/pi-futex.txt
+++ b/Documentation/pi-futex.txt
@@ -119,4 +119,4 @@ properties of futexes, and all four combinations are possible: futex,
 robust-futex, PI-futex, robust+PI-futex.
 
 More details about priority inheritance can be found in
-Documentation/locking/rt-mutex.txt.
+Documentation/locking/rt-mutex.rst.
diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt
index 0c41d6d463f3..10e7f4d16c14 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.txt
@@ -59,7 +59,7 @@ as follows:
          the default calculated size. Use this option if default
          boot memory size is not sufficient for second kernel to
          boot successfully. For syntax of crashkernel= parameter,
-         refer to Documentation/kdump/kdump.rst. If any offset is
+         refer to Documentation/admin-guide/kdump/kdump.rst. If any offset is
          provided in crashkernel= parameter, it will be ignored
          as fadump uses a predefined offset to reserve memory
          for boot memory dump preservation in case of a crash.
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 365efc9e4aa8..8e56337d422d 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -107,7 +107,7 @@ and elsewhere regarding submitting Linux kernel patches.
     and why.
 
 26) If any ioctl's are added by the patch, then also update
-    ``Documentation/ioctl/ioctl-number.txt``.
+    ``Documentation/ioctl/ioctl-number.rst``.
 
 27) If your modified source code depends on or uses any of the kernel
     APIs or features that are related to the following ``Kconfig`` symbols,
diff --git a/Documentation/pti/pti_intel_mid.txt b/Documentation/pti/pti_intel_mid.txt
deleted file mode 100644
index e7a5b6d1f7a9..000000000000
--- a/Documentation/pti/pti_intel_mid.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-The Intel MID PTI project is HW implemented in Intel Atom
-system-on-a-chip designs based on the Parallel Trace
-Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
-for this platform involves the following files:
-
-./include/linux/pti.h
-./drivers/.../n_tracesink.h
-./drivers/.../n_tracerouter.c
-./drivers/.../n_tracesink.c
-./drivers/.../pti.c
-
-pti.c is the driver that enables various debugging features
-popular on platforms from certain mobile manufacturers.
-n_tracerouter.c and n_tracesink.c allow extra system information to
-be collected and routed to the pti driver, such as trace
-debugging data from a modem.  Although n_tracerouter
-and n_tracesink are a part of the complete PTI solution,
-these two line disciplines can work separately from
-pti.c and route any data stream from one /dev/tty node
-to another /dev/tty node via kernel-space.  This provides
-a stable, reliable connection that will not break unless
-the user-space application shuts down (plus avoids
-kernel->user->kernel context switch overheads of routing
-data).
-
-An example debugging usage for this driver system:
-   *Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
-    a console device to further capture debugging messages to PTI.
-   *Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
-    This is where n_tracerouter and n_tracesink are used.
-   *Hook /dev/pti to a user-level debugging application for writing
-    to PTI HW.
-   *Use mipi_* Kernel Driver API in other device drivers for
-    debugging to PTI by first requesting a PTI write address via
-    mipi_request_masterchannel(1).
-
-Below is example pseudo-code on how a 'privileged' application
-can hook up n_tracerouter and n_tracesink to any tty on
-a system.  'Privileged' means the application has enough
-privileges to successfully manipulate the ldisc drivers
-but is not just blindly executing as 'root'. Keep in mind
-the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
-and n_tracesink line discpline drivers but is a generic
-operation for a program to use a line discpline driver
-on a tty port other than the default n_tty.
-
-/////////// To hook up n_tracerouter and n_tracesink /////////
-
-// Note that n_tracerouter depends on n_tracesink.
-#include <errno.h>
-#define ONE_TTY "/dev/ttyOne"
-#define TWO_TTY "/dev/ttyTwo"
-
-// needed global to hand onto ldisc connection
-static int g_fd_source = -1;
-static int g_fd_sink  = -1;
-
-// these two vars used to grab LDISC values from loaded ldisc drivers
-// in OS.  Look at /proc/tty/ldiscs to get the right numbers from
-// the ldiscs loaded in the system.
-int source_ldisc_num, sink_ldisc_num = -1;
-int retval;
-
-g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
-g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
-
-if (g_fd_source <= 0) || (g_fd_sink <= 0) {
-   // doubt you'll want to use these exact error lines of code
-   printf("Error on open(). errno: %d\n",errno);
-   return errno;
-}
-
-retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
-if (retval < 0) {
-   printf("Error on ioctl().  errno: %d\n", errno);
-   return errno;
-}
-
-retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
-if (retval < 0) {
-   printf("Error on ioctl().  errno: %d\n", errno);
-   return errno;
-}
-
-/////////// To disconnect n_tracerouter and n_tracesink ////////
-
-// First make sure data through the ldiscs has stopped.
-
-// Second, disconnect ldiscs.  This provides a
-// little cleaner shutdown on tty stack.
-sink_ldisc_num = 0;
-source_ldisc_num = 0;
-ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
-ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
-
-// Three, program closes connection, and cleanup:
-close(g_fd_uart);
-close(g_fd_gadget);
-g_fd_uart = g_fd_gadget = NULL;
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index c42a21b99046..523d54b60087 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -204,21 +204,21 @@ potentially expensive tree iterations. This is done at negligible runtime
 overhead for maintanence; albeit larger memory footprint.
 
 Similar to the rb_root structure, cached rbtrees are initialized to be
-empty via:
+empty via::
 
   struct rb_root_cached mytree = RB_ROOT_CACHED;
 
 Cached rbtree is simply a regular rb_root with an extra pointer to cache the
 leftmost node. This allows rb_root_cached to exist wherever rb_root does,
 which permits augmented trees to be supported as well as only a few extra
-interfaces:
+interfaces::
 
   struct rb_node *rb_first_cached(struct rb_root_cached *tree);
   void rb_insert_color_cached(struct rb_node *, struct rb_root_cached *, bool);
   void rb_erase_cached(struct rb_node *node, struct rb_root_cached *);
 
 Both insert and erase calls have their respective counterpart of augmented
-trees:
+trees::
 
   void rb_insert_augmented_cached(struct rb_node *node, struct rb_root_cached *,
 				  bool, struct rb_augment_callbacks *);
diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst
index c4b906d9b5a7..e3ca0922a8c2 100644
--- a/Documentation/riscv/index.rst
+++ b/Documentation/riscv/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ===================
 RISC-V architecture
 ===================
diff --git a/Documentation/s390/debugging390.rst b/Documentation/s390/debugging390.rst
index d49305fd5e1a..73ad0b06c666 100644
--- a/Documentation/s390/debugging390.rst
+++ b/Documentation/s390/debugging390.rst
@@ -170,7 +170,7 @@ currently running at.
 |        +----------------+-------------------------------------------------+
 |        |    32          | Basic Addressing Mode                           |
 |        |                |                                                 |
-|        |                | Used to set addressing mode                     |
+|        |                | Used to set addressing mode::                   |
 |        |                |                                                 |
 |        |                |    +---------+----------+----------+            |
 |        |                |    | PSW 31  | PSW 32   |          |            |
diff --git a/Documentation/s390/index.rst b/Documentation/s390/index.rst
index 1a914da2a07b..4602312909d3 100644
--- a/Documentation/s390/index.rst
+++ b/Documentation/s390/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 =================
 s390 Architecture
 =================
diff --git a/Documentation/s390/vfio-ccw.rst b/Documentation/s390/vfio-ccw.rst
index 1f6d0b56d53e..1e210c6afa88 100644
--- a/Documentation/s390/vfio-ccw.rst
+++ b/Documentation/s390/vfio-ccw.rst
@@ -38,7 +38,7 @@ every detail. More information/reference could be found here:
   qemu/hw/s390x/css.c
 
 For vfio mediated device framework:
-- Documentation/vfio-mediated-device.txt
+- Documentation/driver-api/vfio-mediated-device.rst
 
 Motivation of vfio-ccw
 ----------------------
@@ -322,5 +322,5 @@ Reference
 2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
 3. https://en.wikipedia.org/wiki/Channel_I/O
 4. Documentation/s390/cds.rst
-5. Documentation/vfio.txt
-6. Documentation/vfio-mediated-device.txt
+5. Documentation/driver-api/vfio.rst
+6. Documentation/driver-api/vfio-mediated-device.rst
diff --git a/Documentation/scheduler/index.rst b/Documentation/scheduler/index.rst
index 058be77a4c34..69074e5de9c4 100644
--- a/Documentation/scheduler/index.rst
+++ b/Documentation/scheduler/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ===============
 Linux Scheduler
 ===============
diff --git a/Documentation/scheduler/sched-deadline.rst b/Documentation/scheduler/sched-deadline.rst
index 3391e86d810c..14a2f7bf63fe 100644
--- a/Documentation/scheduler/sched-deadline.rst
+++ b/Documentation/scheduler/sched-deadline.rst
@@ -669,7 +669,7 @@ Deadline Task Scheduling
 
  -deadline tasks cannot have an affinity mask smaller that the entire
  root_domain they are created on. However, affinities can be specified
- through the cpuset facility (Documentation/cgroup-v1/cpusets.rst).
+ through the cpuset facility (Documentation/admin-guide/cgroup-v1/cpusets.rst).
 
 5.1 SCHED_DEADLINE and cpusets HOWTO
 ------------------------------------
diff --git a/Documentation/scheduler/sched-design-CFS.rst b/Documentation/scheduler/sched-design-CFS.rst
index 53b30d1967cf..a96c72651877 100644
--- a/Documentation/scheduler/sched-design-CFS.rst
+++ b/Documentation/scheduler/sched-design-CFS.rst
@@ -222,7 +222,7 @@ SCHED_BATCH) tasks.
 
    These options need CONFIG_CGROUPS to be defined, and let the administrator
    create arbitrary groups of tasks, using the "cgroup" pseudo filesystem.  See
-   Documentation/cgroup-v1/cgroups.rst for more information about this filesystem.
+   Documentation/admin-guide/cgroup-v1/cgroups.rst for more information about this filesystem.
 
 When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
diff --git a/Documentation/scheduler/sched-rt-group.rst b/Documentation/scheduler/sched-rt-group.rst
index d27d3f3712fd..655a096ec8fb 100644
--- a/Documentation/scheduler/sched-rt-group.rst
+++ b/Documentation/scheduler/sched-rt-group.rst
@@ -133,7 +133,7 @@ This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
 to control the CPU time reserved for each control group.
 
 For more information on working with control groups, you should read
-Documentation/cgroup-v1/cgroups.rst as well.
+Documentation/admin-guide/cgroup-v1/cgroups.rst as well.
 
 Group settings are checked against the following limits in order to keep the
 configuration schedulable:
diff --git a/Documentation/security/index.rst b/Documentation/security/index.rst
index aad6d92ffe31..fc503dd689a7 100644
--- a/Documentation/security/index.rst
+++ b/Documentation/security/index.rst
@@ -8,7 +8,10 @@ Security Documentation
    credentials
    IMA-templates
    keys/index
-   LSM
+   lsm
+   lsm-development
+   sak
    SCTP
    self-protection
+   siphash
    tpm/index
diff --git a/Documentation/security/LSM.rst b/Documentation/security/lsm-development.rst
index 31d92bc5fdd2..31d92bc5fdd2 100644
--- a/Documentation/security/LSM.rst
+++ b/Documentation/security/lsm-development.rst
diff --git a/Documentation/lsm.txt b/Documentation/security/lsm.rst
index ad4dfd020e0d..ad4dfd020e0d 100644
--- a/Documentation/lsm.txt
+++ b/Documentation/security/lsm.rst
diff --git a/Documentation/SAK.txt b/Documentation/security/sak.rst
index 260e1d3687bd..260e1d3687bd 100644
--- a/Documentation/SAK.txt
+++ b/Documentation/security/sak.rst
diff --git a/Documentation/siphash.txt b/Documentation/security/siphash.rst
index 9965821ab333..9965821ab333 100644
--- a/Documentation/siphash.txt
+++ b/Documentation/security/siphash.rst
diff --git a/Documentation/security/tpm/index.rst b/Documentation/security/tpm/index.rst
index af77a7bbb070..3296533e54cf 100644
--- a/Documentation/security/tpm/index.rst
+++ b/Documentation/security/tpm/index.rst
@@ -5,3 +5,4 @@ Trusted Platform Module documentation
 .. toctree::
 
    tpm_vtpm_proxy
+   xen-tpmfront
diff --git a/Documentation/security/tpm/xen-tpmfront.txt b/Documentation/security/tpm/xen-tpmfront.rst
index 69346de87ff3..00d5b1db227d 100644
--- a/Documentation/security/tpm/xen-tpmfront.txt
+++ b/Documentation/security/tpm/xen-tpmfront.rst
@@ -1,4 +1,6 @@
+=============================
 Virtual TPM interface for Xen
+=============================
 
 Authors: Matthew Fioravante (JHUAPL), Daniel De Graaf (NSA)
 
@@ -6,7 +8,8 @@ This document describes the virtual Trusted Platform Module (vTPM) subsystem for
 Xen. The reader is assumed to have familiarity with building and installing Xen,
 Linux, and a basic understanding of the TPM and vTPM concepts.
 
-INTRODUCTION
+Introduction
+------------
 
 The goal of this work is to provide a TPM functionality to a virtual guest
 operating system (in Xen terms, a DomU).  This allows programs to interact with
@@ -24,81 +27,89 @@ This mini-os vTPM subsystem was built on top of the previous vTPM work done by
 IBM and Intel corporation.
 
 
-DESIGN OVERVIEW
+Design Overview
 ---------------
 
-The architecture of vTPM is described below:
-
-+------------------+
-|    Linux DomU    | ...
-|       |  ^       |
-|       v  |       |
-|   xen-tpmfront   |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-| mini-os/tpmback  |
-|       |  ^       |
-|       v  |       |
-|  vtpm-stubdom    | ...
-|       |  ^       |
-|       v  |       |
-| mini-os/tpmfront |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-| mini-os/tpmback  |
-|       |  ^       |
-|       v  |       |
-| vtpmmgr-stubdom  |
-|       |  ^       |
-|       v  |       |
-| mini-os/tpm_tis  |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-|   Hardware TPM   |
-+------------------+
-
- * Linux DomU: The Linux based guest that wants to use a vTPM. There may be
+The architecture of vTPM is described below::
+
+  +------------------+
+  |    Linux DomU    | ...
+  |       |  ^       |
+  |       v  |       |
+  |   xen-tpmfront   |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  | mini-os/tpmback  |
+  |       |  ^       |
+  |       v  |       |
+  |  vtpm-stubdom    | ...
+  |       |  ^       |
+  |       v  |       |
+  | mini-os/tpmfront |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  | mini-os/tpmback  |
+  |       |  ^       |
+  |       v  |       |
+  | vtpmmgr-stubdom  |
+  |       |  ^       |
+  |       v  |       |
+  | mini-os/tpm_tis  |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  |   Hardware TPM   |
+  +------------------+
+
+* Linux DomU:
+	       The Linux based guest that wants to use a vTPM. There may be
 	       more than one of these.
 
- * xen-tpmfront.ko: Linux kernel virtual TPM frontend driver. This driver
+* xen-tpmfront.ko:
+		    Linux kernel virtual TPM frontend driver. This driver
                     provides vTPM access to a Linux-based DomU.
 
- * mini-os/tpmback: Mini-os TPM backend driver. The Linux frontend driver
+* mini-os/tpmback:
+		    Mini-os TPM backend driver. The Linux frontend driver
 		    connects to this backend driver to facilitate communications
 		    between the Linux DomU and its vTPM. This driver is also
 		    used by vtpmmgr-stubdom to communicate with vtpm-stubdom.
 
- * vtpm-stubdom: A mini-os stub domain that implements a vTPM. There is a
+* vtpm-stubdom:
+		 A mini-os stub domain that implements a vTPM. There is a
 		 one to one mapping between running vtpm-stubdom instances and
                  logical vtpms on the system. The vTPM Platform Configuration
                  Registers (PCRs) are normally all initialized to zero.
 
- * mini-os/tpmfront: Mini-os TPM frontend driver. The vTPM mini-os domain
+* mini-os/tpmfront:
+		     Mini-os TPM frontend driver. The vTPM mini-os domain
 		     vtpm-stubdom uses this driver to communicate with
 		     vtpmmgr-stubdom. This driver is also used in mini-os
 		     domains such as pv-grub that talk to the vTPM domain.
 
- * vtpmmgr-stubdom: A mini-os domain that implements the vTPM manager. There is
+* vtpmmgr-stubdom:
+		    A mini-os domain that implements the vTPM manager. There is
 		    only one vTPM manager and it should be running during the
 		    entire lifetime of the machine.  This domain regulates
 		    access to the physical TPM on the system and secures the
 		    persistent state of each vTPM.
 
- * mini-os/tpm_tis: Mini-os TPM version 1.2 TPM Interface Specification (TIS)
+* mini-os/tpm_tis:
+		    Mini-os TPM version 1.2 TPM Interface Specification (TIS)
                     driver. This driver used by vtpmmgr-stubdom to talk directly to
                     the hardware TPM. Communication is facilitated by mapping
                     hardware memory pages into vtpmmgr-stubdom.
 
- * Hardware TPM: The physical TPM that is soldered onto the motherboard.
+* Hardware TPM:
+		The physical TPM that is soldered onto the motherboard.
 
 
-INTEGRATION WITH XEN
+Integration With Xen
 --------------------
 
 Support for the vTPM driver was added in Xen using the libxl toolstack in Xen
diff --git a/Documentation/sparc/index.rst b/Documentation/sparc/index.rst
index 91f7d6643dd5..71cff621f243 100644
--- a/Documentation/sparc/index.rst
+++ b/Documentation/sparc/index.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ==================
 Sparc Architecture
 ==================
diff --git a/Documentation/sysctl/abi.txt b/Documentation/sysctl/abi.txt
deleted file mode 100644
index 63f4ebcf652c..000000000000
--- a/Documentation/sysctl/abi.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Documentation for /proc/sys/abi/* kernel version 2.6.0.test2
-	(c) 2003,  Fabian Frederick <ffrederick@users.sourceforge.net>
-
-For general info : README.
-
-==============================================================
-
-This path is binary emulation relevant aka personality types aka abi.
-When a process is executed, it's linked to an exec_domain whose
-personality is defined using values available from /proc/sys/abi.
-You can find further details about abi in include/linux/personality.h.
-
-Here are the files featuring in 2.6 kernel :
-
-- defhandler_coff
-- defhandler_elf
-- defhandler_lcall7
-- defhandler_libcso
-- fake_utsname
-- trace
-
-===========================================================
-defhandler_coff:
-defined value :
-PER_SCOSVR3
-0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
-
-===========================================================
-defhandler_elf:
-defined value :
-PER_LINUX
-0
-
-===========================================================
-defhandler_lcall7:
-defined value :
-PER_SVR4
-0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-===========================================================
-defhandler_libsco:
-defined value:
-PER_SVR4
-0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-===========================================================
-fake_utsname:
-Unused
-
-===========================================================
-trace:
-Unused
-
-===========================================================
diff --git a/Documentation/target/index.rst b/Documentation/target/index.rst
index b68f48982392..4b24f81f747e 100644
--- a/Documentation/target/index.rst
+++ b/Documentation/target/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ==================
 TCM Virtual Device
diff --git a/Documentation/timers/index.rst b/Documentation/timers/index.rst
index 91f6f8263c48..df510ad0c989 100644
--- a/Documentation/timers/index.rst
+++ b/Documentation/timers/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ======
 timers
diff --git a/Documentation/translations/it_IT/kernel-hacking/locking.rst b/Documentation/translations/it_IT/kernel-hacking/locking.rst
index 5fd8a1abd2be..b9a6be4b8499 100644
--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1404,7 +1404,7 @@ Riferimento per l'API dei Futex
 Approfondimenti
 ===============
 
--  ``Documentation/locking/spinlocks.txt``: la guida di Linus Torvalds agli
+-  ``Documentation/locking/spinlocks.rst``: la guida di Linus Torvalds agli
    spinlock del kernel.
 
 -  Unix Systems for Modern Architectures: Symmetric Multiprocessing and
diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst
index ea74cae958d7..995ee69fab11 100644
--- a/Documentation/translations/it_IT/process/submit-checklist.rst
+++ b/Documentation/translations/it_IT/process/submit-checklist.rst
@@ -117,7 +117,7 @@ sottomissione delle patch, in particolare
     sorgenti che ne spieghi la logica: cosa fanno e perché.
 
 25) Se la patch aggiunge nuove chiamate ioctl, allora aggiornate
-    ``Documentation/ioctl/ioctl-number.txt``.
+    ``Documentation/ioctl/ioctl-number.rst``.
 
 26) Se il codice che avete modificato dipende o usa una qualsiasi interfaccia o
     funzionalità del kernel che è associata a uno dei seguenti simboli
diff --git a/Documentation/translations/zh_CN/arm/Booting b/Documentation/translations/zh_CN/arm/Booting
index 1fe866f8218f..562e9a2957e6 100644
--- a/Documentation/translations/zh_CN/arm/Booting
+++ b/Documentation/translations/zh_CN/arm/Booting
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm/Booting
+Chinese translated version of Documentation/arm/booting.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Russell King <linux@arm.linux.org.uk>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/arm/Booting 的中文翻译
+Documentation/arm/booting.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接�系原文档的维护者。如果你使用英文
 交�有困难的�，也�以�中文版维护者求助。如果本翻译更新��时或者翻
diff --git a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt b/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
index cd7fc8f34cf9..99af4363984d 100644
--- a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
+++ b/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm/kernel_user_helpers.txt
+Chinese translated version of Documentation/arm/kernel_user_helpers.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Nicolas Pitre <nicolas.pitre@linaro.org>
 		Dave Martin <dave.martin@linaro.org>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/arm/kernel_user_helpers.txt 的中文翻译
+Documentation/arm/kernel_user_helpers.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接�系原文档的维护者。如果你使用英文
 交�有困难的�，也�以�中文版维护者求助。如果本翻译更新��时或者翻
diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt
index 452271dda141..ee1f37da5b23 100644
--- a/Documentation/translations/zh_CN/filesystems/sysfs.txt
+++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt
@@ -288,7 +288,7 @@ dev/ 包å�«ä¸¤ä¸ªå­�目录： char/ å’Œ block/。在这两个å­�目录中，有ä
 中相应的设备。/sys/dev �供一个通过一个 stat(2) �作结果，查找
 设备 sysfs 接�快�的方法。
 
-更多有关 driver-model 的特性信��以在 Documentation/driver-model/
+更多有关 driver-model 的特性信��以在 Documentation/driver-api/driver-model/
 中找到。
 
 
diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt
index 4cb1ba8b8fed..a23ee14fc927 100644
--- a/Documentation/translations/zh_CN/gpio.txt
+++ b/Documentation/translations/zh_CN/gpio.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/gpio
+Chinese translated version of Documentation/admin-guide/gpio
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Grant Likely <grant.likely@secretlab.ca>
 		Linus Walleij <linus.walleij@linaro.org>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/gpio 的中文翻译
+Documentation/admin-guide/gpio 的中文翻译
 
 如果想评论或更新本文的内容，请直接�系原文档的维护者。如果你使用英文
 交�有困难的�，也�以�中文版维护者求助。如果本翻译更新��时或者翻
diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt
index 368ddd05b304..c5f3bda7abcb 100644
--- a/Documentation/translations/zh_CN/oops-tracing.txt
+++ b/Documentation/translations/zh_CN/oops-tracing.txt
@@ -53,8 +53,8 @@ cat /proc/kmsg > file， 然而你必须介入中止传输， kmsg是一个“æ°
 （2）用串�终端�动（请�看Documentation/admin-guide/serial-console.rst），�行一个null
 modem到�一�机器并用你喜欢的通讯工具获�输出。Minicom工作地很好。
 
-（3）使用Kdump（请�看Documentation/kdump/kdump.rst），
-使用在Documentation/kdump/gdbmacros.txt中定义的dmesg gdb�，从旧的内存中��内核
+（3）使用Kdump（请�看Documentation/admin-guide/kdump/kdump.rst），
+使用在Documentation/admin-guide/kdump/gdbmacros.txt中定义的dmesg gdb�，从旧的内存中��内核
 环形缓冲区。
 
 完整信�
diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst
index f4785d2b0491..8738c55e42a2 100644
--- a/Documentation/translations/zh_CN/process/submit-checklist.rst
+++ b/Documentation/translations/zh_CN/process/submit-checklist.rst
@@ -97,7 +97,7 @@ Linux内核补��交清�
 24) 所有内存�障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需��代�中的注
     释�解释它们正在执行的�作�其原因的逻辑。
 
-25) 如果补�添加了任何ioctl，那么也�更新 ``Documentation/ioctl/ioctl-number.txt``
+25) 如果补�添加了任何ioctl，那么也�更新 ``Documentation/ioctl/ioctl-number.rst``
 
 26) 如果修改�的�代��赖或使用与以下 ``Kconfig`` 符�相关的任何内核API或
     功能，则在�用相关 ``Kconfig`` 符�和/或 ``=m`` （如果该选项�用）的情况
diff --git a/Documentation/accelerators/ocxl.rst b/Documentation/userspace-api/accelerators/ocxl.rst
index b1cea19a90f5..14cefc020e2d 100644
--- a/Documentation/accelerators/ocxl.rst
+++ b/Documentation/userspace-api/accelerators/ocxl.rst
@@ -1,5 +1,3 @@
-:orphan:
-
 ========================================================
 OpenCAPI (Open Coherent Accelerator Processor Interface)
 ========================================================
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index a3233da7fa88..ad494da40009 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -20,6 +20,7 @@ place where this information is gathered.
    seccomp_filter
    unshare
    spec_ctrl
+   accelerators/ocxl
 
 .. only::  subproject and html
 
diff --git a/Documentation/vm/numa.rst b/Documentation/vm/numa.rst
index 130f3cfa1c19..99fdeca917ca 100644
--- a/Documentation/vm/numa.rst
+++ b/Documentation/vm/numa.rst
@@ -67,7 +67,7 @@ nodes.  Each emulated node will manage a fraction of the underlying cells'
 physical memory.  NUMA emluation is useful for testing NUMA kernel and
 application features on non-NUMA platforms, and as a sort of memory resource
 management mechanism when used together with cpusets.
-[see Documentation/cgroup-v1/cpusets.rst]
+[see Documentation/admin-guide/cgroup-v1/cpusets.rst]
 
 For each node with memory, Linux constructs an independent memory management
 subsystem, complete with its own free page lists, in-use page lists, usage
@@ -114,7 +114,7 @@ allocation behavior using Linux NUMA memory policy. [see
 
 System administrators can restrict the CPUs and nodes' memories that a non-
 privileged user can specify in the scheduling or NUMA commands and functions
-using control groups and CPUsets.  [see Documentation/cgroup-v1/cpusets.rst]
+using control groups and CPUsets.  [see Documentation/admin-guide/cgroup-v1/cpusets.rst]
 
 On architectures that do not hide memoryless nodes, Linux will include only
 zones [nodes] with memory in the zonelists.  This means that for a memoryless
diff --git a/Documentation/vm/page_migration.rst b/Documentation/vm/page_migration.rst
index 35bba27d5fff..1d6cd7db4e43 100644
--- a/Documentation/vm/page_migration.rst
+++ b/Documentation/vm/page_migration.rst
@@ -41,7 +41,7 @@ locations.
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
 move pages when a task is moved to another cpuset (See
-Documentation/cgroup-v1/cpusets.rst).
+Documentation/admin-guide/cgroup-v1/cpusets.rst).
 Cpusets allows the automation of process locality. If a task is moved to
 a new cpuset then also all its pages are moved with it so that the
 performance of the process does not sink dramatically. Also the pages
diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst
index c6d94118fbcc..17d0861b0f1d 100644
--- a/Documentation/vm/unevictable-lru.rst
+++ b/Documentation/vm/unevictable-lru.rst
@@ -98,7 +98,7 @@ Memory Control Group Interaction
 --------------------------------
 
 The unevictable LRU facility interacts with the memory control group [aka
-memory controller; see Documentation/cgroup-v1/memory.rst] by extending the
+memory controller; see Documentation/admin-guide/cgroup-v1/memory.rst] by extending the
 lru_list enum.
 
 The memory controller data structure automatically gets a per-zone unevictable
@@ -439,7 +439,7 @@ Compacting MLOCKED Pages
 
 The unevictable LRU can be scanned for compactable regions and the default
 behavior is to do so.  /proc/sys/vm/compact_unevictable_allowed controls
-this behavior (see Documentation/sysctl/vm.txt).  Once scanning of the
+this behavior (see Documentation/admin-guide/sysctl/vm.rst).  Once scanning of the
 unevictable LRU is enabled, the work of compaction is mostly handled by
 the page migration code and the same work flow as described in MIGRATING
 MLOCKED PAGES will apply.
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
index ef2727192d69..94ad4c420828 100644
--- a/Documentation/w1/w1.netlink
+++ b/Documentation/w1/w1.netlink
@@ -183,7 +183,7 @@ acknowledge number is set to seq+1.
 Additional documantion, source code examples.
 ============================================
 
-1. Documentation/connector
+1. Documentation/driver-api/connector.rst
 2. http://www.ioremap.net/archive/w1
 This archive includes userspace application w1d.c which uses
 read/write/search commands for all master/slave devices found on the bus.
diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst
index 33a0de631e84..c177645081d8 100644
--- a/Documentation/watchdog/index.rst
+++ b/Documentation/watchdog/index.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ======================
 Linux Watchdog Support
diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
index f2de1b2d3ac7..af64c4bb4447 100644
--- a/Documentation/x86/index.rst
+++ b/Documentation/x86/index.rst
@@ -20,6 +20,8 @@ x86-specific Documentation
    mtrr
    pat
    intel_mpx
+   intel-iommu
+   intel_txt
    amd-memory-encryption
    pti
    mds
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/x86/intel-iommu.rst
index 9dae6b47e398..9dae6b47e398 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/x86/intel-iommu.rst
diff --git a/Documentation/intel_txt.txt b/Documentation/x86/intel_txt.rst
index d83c1a2122c9..d83c1a2122c9 100644
--- a/Documentation/intel_txt.txt
+++ b/Documentation/x86/intel_txt.rst
diff --git a/Documentation/x86/topology.rst b/Documentation/x86/topology.rst
index 8e9704f61017..e29739904e37 100644
--- a/Documentation/x86/topology.rst
+++ b/Documentation/x86/topology.rst
@@ -9,7 +9,7 @@ representation in the kernel. Update/change when doing changes to the
 respective code.
 
 The architecture-agnostic topology definitions are in
-Documentation/cputopology.txt. This file holds x86-specific
+Documentation/admin-guide/cputopology.rst. This file holds x86-specific
 differences/specialities which must not necessarily apply to the generic
 definitions. Thus, the way to read up on Linux topology on x86 is to start
 with the generic one and look at this one in parallel for the x86 specifics.
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
index 30108684ae87..ff9bcfd2cc14 100644
--- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
+++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
@@ -15,7 +15,7 @@ assign them to cpusets and their attached tasks.  This is a way of limiting the
 amount of system memory that are available to a certain class of tasks.
 
 For more information on the features of cpusets, see
-Documentation/cgroup-v1/cpusets.rst.
+Documentation/admin-guide/cgroup-v1/cpusets.rst.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
 configuring fake nodes, see Documentation/x86/x86_64/boot-options.rst.
@@ -40,7 +40,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg::
 	On node 3 totalpages: 131072
 
 Now following the instructions for mounting the cpusets filesystem from
-Documentation/cgroup-v1/cpusets.rst, you can assign fake nodes (i.e. contiguous memory
+Documentation/admin-guide/cgroup-v1/cpusets.rst, you can assign fake nodes (i.e. contiguous memory
 address spaces) to individual cpusets::
 
 	[root@xroads /]# mkdir exampleset
diff --git a/Documentation/xtensa/atomctl.txt b/Documentation/xtensa/atomctl.rst
index 1da783ac200c..1ecbd0ba9a2e 100644
--- a/Documentation/xtensa/atomctl.txt
+++ b/Documentation/xtensa/atomctl.rst
@@ -1,3 +1,7 @@
+===========================================
+Atomic Operation Control (ATOMCTL) Register
+===========================================
+
 We Have Atomic Operation Control (ATOMCTL) Register.
 This register determines the effect of using a S32C1I instruction
 with various combinations of:
@@ -8,7 +12,7 @@ with various combinations of:
      2. With and without An Intelligent Memory Controller which
         can do Atomic Transactions itself.
 
-The Core comes up with a default value of for the three types of cache ops:
+The Core comes up with a default value of for the three types of cache ops::
 
       0x28: (WB: Internal, WT: Internal, BY:Exception)
 
@@ -30,15 +34,18 @@ CUSTOMER-WARNING:
 Developers might find using RCW in Bypass mode convenient when testing
 with the cache being bypassed; for example studying cache alias problems.
 
-See Section 4.3.12.4 of ISA; Bits:
+See Section 4.3.12.4 of ISA; Bits::
 
                              WB     WT      BY
                            5   4 | 3   2 | 1   0
+
+=========    ==================      ==================      ===============
   2 Bit
   Field
   Values     WB - Write Back         WT - Write Thru         BY - Bypass
----------    ---------------         -----------------     ----------------
+=========    ==================      ==================      ===============
     0        Exception               Exception               Exception
     1        RCW Transaction         RCW Transaction         RCW Transaction
     2        Internal Operation      Internal Operation      Reserved
     3        Reserved                Reserved                Reserved
+=========    ==================      ==================      ===============
diff --git a/Documentation/xtensa/booting.txt b/Documentation/xtensa/booting.rst
index 402b33a2619f..e1b83707e5b6 100644
--- a/Documentation/xtensa/booting.txt
+++ b/Documentation/xtensa/booting.rst
@@ -1,10 +1,13 @@
-Passing boot parameters to the kernel.
+=====================================
+Passing boot parameters to the kernel
+=====================================
 
 Boot parameters are represented as a TLV list in the memory. Please see
 arch/xtensa/include/asm/bootparam.h for definition of the bp_tag structure and
 tag value constants. First entry in the list must have type BP_TAG_FIRST, last
 entry must have type BP_TAG_LAST. The address of the first list entry is
 passed to the kernel in the register a2. The address type depends on MMU type:
+
 - For configurations without MMU, with region protection or with MPU the
   address must be the physical address.
 - For configurations with region translarion MMU or with MMUv3 and CONFIG_MMU=n
diff --git a/Documentation/xtensa/index.rst b/Documentation/xtensa/index.rst
new file mode 100644
index 000000000000..52fa04eb39a3
--- /dev/null
+++ b/Documentation/xtensa/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+Xtensa Architecture
+===================
+
+.. toctree::
+   :maxdepth: 1
+
+   atomctl
+   booting
+   mmu
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/xtensa/mmu.rst
new file mode 100644
index 000000000000..e52a12960fdc
--- /dev/null
+++ b/Documentation/xtensa/mmu.rst
@@ -0,0 +1,195 @@
+=============================
+MMUv3 initialization sequence
+=============================
+
+The code in the initialize_mmu macro sets up MMUv3 memory mapping
+identically to MMUv2 fixed memory mapping. Depending on
+CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
+located in addresses it was linked for (symbol undefined), or not
+(symbol defined), so it needs to be position-independent.
+
+The code has the following assumptions:
+
+  - This code fragment is run only on an MMU v3.
+  - TLBs are in their reset state.
+  - ITLBCFG and DTLBCFG are zero (reset state).
+  - RASID is 0x04030201 (reset state).
+  - PS.RING is zero (reset state).
+  - LITBASE is zero (reset state, PC-relative literals); required to be PIC.
+
+TLB setup proceeds along the following steps.
+
+  Legend:
+
+    - VA = virtual address (two upper nibbles of it);
+    - PA = physical address (two upper nibbles of it);
+    - pc = physical range that contains this code;
+
+After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
+or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
+0x40000000 or above. That address corresponds to next instruction to execute
+in this code. After step 4, we jump to intended (linked) address of this code.
+The scheme below assumes that the kernel is loaded below 0x40000000.
+
+ ====== =====  =====  =====  =====   ====== =====  =====
+ -      Step0  Step1  Step2  Step3          Step4  Step5
+
+   VA      PA     PA     PA     PA     VA      PA     PA
+ ====== =====  =====  =====  =====   ====== =====  =====
+ E0..FF -> E0  -> E0  -> E0          F0..FF -> F0  -> F0
+ C0..DF -> C0  -> C0  -> C0          E0..EF -> F0  -> F0
+ A0..BF -> A0  -> A0  -> A0          D8..DF -> 00  -> 00
+ 80..9F -> 80  -> 80  -> 80          D0..D7 -> 00  -> 00
+ 60..7F -> 60  -> 60  -> 60
+ 40..5F -> 40         -> pc  -> pc   40..5F -> pc
+ 20..3F -> 20  -> 20  -> 20
+ 00..1F -> 00  -> 00  -> 00
+ ====== =====  =====  =====  =====   ====== =====  =====
+
+The default location of IO peripherals is above 0xf0000000. This may be changed
+using a "ranges" property in a device tree simple-bus node. See the Devicetree
+Specification, section 4.5 for details on the syntax and semantics of
+simple-bus nodes. The following limitations apply:
+
+1. Only top level simple-bus nodes are considered
+
+2. Only one (first) simple-bus node is considered
+
+3. Empty "ranges" properties are not supported
+
+4. Only the first triplet in the "ranges" property is considered
+
+5. The parent-bus-address value is rounded down to the nearest 256MB boundary
+
+6. The IO area covers the entire 256MB segment of parent-bus-address; the
+   "ranges" triplet length field is ignored
+
+
+MMUv3 address space layouts.
+============================
+
+Default MMUv2-compatible layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0xcffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xd0000000  128MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xd8000000  128MB
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
+
+
+256MB cached + 256MB uncached layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0xaffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xb0000000  256MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  256MB
+  +------------------+
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
+
+
+512MB cached + 512MB uncached layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0x9ffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xa0000000  512MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  512MB
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt
deleted file mode 100644
index 318114de63f3..000000000000
--- a/Documentation/xtensa/mmu.txt
+++ /dev/null
@@ -1,189 +0,0 @@
-MMUv3 initialization sequence.
-
-The code in the initialize_mmu macro sets up MMUv3 memory mapping
-identically to MMUv2 fixed memory mapping. Depending on
-CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
-located in addresses it was linked for (symbol undefined), or not
-(symbol defined), so it needs to be position-independent.
-
-The code has the following assumptions:
-  This code fragment is run only on an MMU v3.
-  TLBs are in their reset state.
-  ITLBCFG and DTLBCFG are zero (reset state).
-  RASID is 0x04030201 (reset state).
-  PS.RING is zero (reset state).
-  LITBASE is zero (reset state, PC-relative literals); required to be PIC.
-
-TLB setup proceeds along the following steps.
-
-  Legend:
-    VA = virtual address (two upper nibbles of it);
-    PA = physical address (two upper nibbles of it);
-    pc = physical range that contains this code;
-
-After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
-or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
-0x40000000 or above. That address corresponds to next instruction to execute
-in this code. After step 4, we jump to intended (linked) address of this code.
-The scheme below assumes that the kernel is loaded below 0x40000000.
-
-        Step0  Step1  Step2  Step3          Step4  Step5
-        =====  =====  =====  =====          =====  =====
-   VA      PA     PA     PA     PA     VA      PA     PA
- ------    --     --     --     --   ------    --     --
- E0..FF -> E0  -> E0  -> E0          F0..FF -> F0  -> F0
- C0..DF -> C0  -> C0  -> C0          E0..EF -> F0  -> F0
- A0..BF -> A0  -> A0  -> A0          D8..DF -> 00  -> 00
- 80..9F -> 80  -> 80  -> 80          D0..D7 -> 00  -> 00
- 60..7F -> 60  -> 60  -> 60
- 40..5F -> 40         -> pc  -> pc   40..5F -> pc
- 20..3F -> 20  -> 20  -> 20
- 00..1F -> 00  -> 00  -> 00
-
-The default location of IO peripherals is above 0xf0000000. This may be changed
-using a "ranges" property in a device tree simple-bus node. See the Devicetree
-Specification, section 4.5 for details on the syntax and semantics of
-simple-bus nodes. The following limitations apply:
-
-1. Only top level simple-bus nodes are considered
-
-2. Only one (first) simple-bus node is considered
-
-3. Empty "ranges" properties are not supported
-
-4. Only the first triplet in the "ranges" property is considered
-
-5. The parent-bus-address value is rounded down to the nearest 256MB boundary
-
-6. The IO area covers the entire 256MB segment of parent-bus-address; the
-   "ranges" triplet length field is ignored
-
-
-MMUv3 address space layouts.
-============================
-
-Default MMUv2-compatible layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0xcffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xd0000000  128MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xd8000000  128MB
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
-
-
-256MB cached + 256MB uncached layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0xaffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xb0000000  256MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  256MB
-+------------------+
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
-
-
-512MB cached + 512MB uncached layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0x9ffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xa0000000  512MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  512MB
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
diff --git a/MAINTAINERS b/MAINTAINERS
index afba8bf5d716..c144bd6a432e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1155,7 +1155,7 @@ APPLIED MICRO (APM) X-GENE SOC PMU
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
 S:	Supported
 F:	drivers/perf/xgene_pmu.c
-F:	Documentation/perf/xgene-pmu.txt
+F:	Documentation/admin-guide/perf/xgene-pmu.rst
 F:	Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
 
 APTINA CAMERA SENSOR PLL
@@ -2218,7 +2218,7 @@ F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
-F:	Documentation/arm/Samsung/
+F:	Documentation/arm/samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/sram/samsung-sram.txt
 F:	Documentation/devicetree/bindings/power/pd-samsung.txt
@@ -2689,7 +2689,7 @@ ATA OVER ETHERNET (AOE) DRIVER
 M:	"Justin Sanders" <justin@coraid.com>
 W:	http://www.openaoe.org/
 S:	Supported
-F:	Documentation/aoe/
+F:	Documentation/admin-guide/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS 71XX/9XXX GPIO DRIVER
@@ -2968,7 +2968,7 @@ M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-block@vger.kernel.org
 S:	Maintained
 F:	block/bfq-*
-F:	Documentation/block/bfq-iosched.txt
+F:	Documentation/block/bfq-iosched.rst
 
 BFS FILE SYSTEM
 M:	"Tigran A. Aivazian" <aivazian.tigran@gmail.com>
@@ -4158,7 +4158,7 @@ L:	cgroups@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	Documentation/admin-guide/cgroup-v2.rst
-F:	Documentation/cgroup-v1/
+F:	Documentation/admin-guide/cgroup-v1/
 F:	include/linux/cgroup*
 F:	kernel/cgroup/
 
@@ -4169,7 +4169,7 @@ W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
-F:	Documentation/cgroup-v1/cpusets.rst
+F:	Documentation/admin-guide/cgroup-v1/cpusets.rst
 F:	include/linux/cpuset.h
 F:	kernel/cgroup/cpuset.c
 
@@ -4655,7 +4655,7 @@ DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
 M:	Stuart Hayes <stuart.w.hayes@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	Documentation/dcdbas.txt
+F:	Documentation/driver-api/dcdbas.rst
 F:	drivers/platform/x86/dcdbas.*
 
 DELL WMI NOTIFICATIONS DRIVER
@@ -4748,7 +4748,7 @@ Q:	http://patchwork.kernel.org/project/dm-devel/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git
 T:	quilt http://people.redhat.com/agk/patches/linux/editing/
 S:	Maintained
-F:	Documentation/device-mapper/
+F:	Documentation/admin-guide/device-mapper/
 F:	drivers/md/Makefile
 F:	drivers/md/Kconfig
 F:	drivers/md/dm*
@@ -5019,7 +5019,7 @@ T:	git git://git.linbit.com/drbd-8.4.git
 S:	Supported
 F:	drivers/block/drbd/
 F:	lib/lru_cache.c
-F:	Documentation/blockdev/drbd/
+F:	Documentation/admin-guide/blockdev/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -6100,7 +6100,7 @@ M:	Ard Biesheuvel <ard.biesheuvel@linaro.org>
 L:	linux-efi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 S:	Maintained
-F:	Documentation/efi-stub.txt
+F:	Documentation/admin-guide/efi-stub.rst
 F:	arch/*/kernel/efi.c
 F:	arch/x86/boot/compressed/eboot.[ch]
 F:	arch/*/include/asm/efi.h
@@ -6675,7 +6675,7 @@ S:	Maintained
 F:	scripts/gcc-plugins/
 F:	scripts/gcc-plugin.sh
 F:	scripts/Makefile.gcc-plugins
-F:	Documentation/gcc-plugins.txt
+F:	Documentation/core-api/gcc-plugins.rst
 
 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
@@ -6887,7 +6887,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/
 F:	Documentation/driver-api/gpio/
-F:	Documentation/gpio/
+F:	Documentation/admin-guide/gpio/
 F:	Documentation/ABI/testing/gpio-cdev
 F:	Documentation/ABI/obsolete/sysfs-gpio
 F:	drivers/gpio/
@@ -7108,7 +7108,7 @@ M:	Herbert Xu <herbert@gondor.apana.org.au>
 L:	linux-crypto@vger.kernel.org
 S:	Odd fixes
 F:	Documentation/devicetree/bindings/rng/
-F:	Documentation/hw_random.txt
+F:	Documentation/admin-guide/hw_random.rst
 F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
@@ -7282,7 +7282,7 @@ M:	Shaokun Zhang <zhangshaokun@hisilicon.com>
 W:	http://www.hisilicon.com
 S:	Supported
 F:	drivers/perf/hisilicon
-F:	Documentation/perf/hisi-pmu.txt
+F:	Documentation/admin-guide/perf/hisi-pmu.rst
 
 HISILICON ROCE DRIVER
 M:	Lijun Ou <oulijun@huawei.com>
@@ -8332,7 +8332,7 @@ L:	tboot-devel@lists.sourceforge.net
 W:	http://tboot.sourceforge.net
 T:	hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
 S:	Supported
-F:	Documentation/intel_txt.txt
+F:	Documentation/x86/intel_txt.rst
 F:	include/linux/tboot.h
 F:	arch/x86/kernel/tboot.c
 
@@ -8346,7 +8346,7 @@ INTERCONNECT API
 M:	Georgi Djakov <georgi.djakov@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/interconnect/
+F:	Documentation/driver-api/interconnect.rst
 F:	Documentation/devicetree/bindings/interconnect/
 F:	drivers/interconnect/
 F:	include/dt-bindings/interconnect/
@@ -8482,7 +8482,7 @@ F:	drivers/irqchip/
 ISA
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
 S:	Maintained
-F:	Documentation/isa.txt
+F:	Documentation/driver-api/isa.rst
 F:	drivers/base/isa.c
 F:	include/linux/isa.h
 
@@ -8497,7 +8497,7 @@ F:	drivers/media/radio/radio-isa*
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
-F:	Documentation/isapnp.txt
+F:	Documentation/driver-api/isapnp.rst
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
@@ -8695,7 +8695,7 @@ R:	Vivek Goyal <vgoyal@redhat.com>
 L:	kexec@lists.infradead.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
-F:	Documentation/kdump/
+F:	Documentation/admin-guide/kdump/
 
 KEENE FM RADIO TRANSMITTER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
@@ -9049,7 +9049,7 @@ M:	Matan Ziv-Av <matan@svgalib.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-platform-lg-laptop
-F:	Documentation/laptops/lg-laptop.rst
+F:	Documentation/admin-guide/laptops/lg-laptop.rst
 F:	drivers/platform/x86/lg-laptop.c
 
 LG2160 MEDIA DRIVER
@@ -9418,7 +9418,7 @@ M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
-F:	Documentation/ldm.txt
+F:	Documentation/admin-guide/ldm.rst
 F:	block/partitions/ldm.*
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
@@ -10380,7 +10380,7 @@ M:	Johannes Thumshirn <morbidrsa@gmail.com>
 S:	Maintained
 F:	drivers/mcb/
 F:	include/linux/mcb.h
-F:	Documentation/men-chameleon-bus.txt
+F:	Documentation/driver-api/men-chameleon-bus.rst
 
 MEN F21BMC (Board Management Controller)
 M:	Andreas Werner <andreas.werner@men.de>
@@ -10794,7 +10794,7 @@ F:	include/uapi/linux/meye.h
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
-F:	Documentation/serial/moxa-smartio.rst
+F:	Documentation/driver-api/serial/moxa-smartio.rst
 F:	drivers/tty/mxser.*
 
 MR800 AVERMEDIA USB FM RADIO DRIVER
@@ -11095,7 +11095,7 @@ M:	Josef Bacik <josef@toxicpanda.com>
 S:	Maintained
 L:	linux-block@vger.kernel.org
 L:	nbd@other.debian.org
-F:	Documentation/blockdev/nbd.txt
+F:	Documentation/admin-guide/blockdev/nbd.rst
 F:	drivers/block/nbd.c
 F:	include/trace/events/nbd.h
 F:	include/uapi/linux/nbd.h
@@ -11554,7 +11554,7 @@ F:	arch/powerpc/include/asm/pnv-ocxl.h
 F:	drivers/misc/ocxl/
 F:	include/misc/ocxl*
 F:	include/uapi/misc/ocxl.h
-F:	Documentation/accelerators/ocxl.rst
+F:	Documentation/userspace-api/accelerators/ocxl.rst
 
 OMAP AUDIO SUPPORT
 M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
@@ -11590,7 +11590,7 @@ L:	linux-omap@vger.kernel.org
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
 F:	drivers/video/fbdev/omap2/
-F:	Documentation/arm/OMAP/DSS
+F:	Documentation/arm/omap/dss.rst
 
 OMAP FRAMEBUFFER SUPPORT
 L:	linux-fbdev@vger.kernel.org
@@ -12077,7 +12077,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:	Odd Fixes
-F:	Documentation/auxdisplay/lcd-panel-cgram.txt
+F:	Documentation/admin-guide/lcd-panel-cgram.rst
 F:	drivers/auxdisplay/panel.c
 
 PARALLEL PORT SUBSYSTEM
@@ -12089,7 +12089,7 @@ F:	drivers/parport/
 F:	include/linux/parport*.h
 F:	drivers/char/ppdev.c
 F:	include/uapi/linux/ppdev.h
-F:	Documentation/parport*.txt
+F:	Documentation/driver-api/parport*.rst
 
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
@@ -12105,7 +12105,7 @@ PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
 M:	Tim Waugh <tim@cyberelk.net>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 S:	Maintained
-F:	Documentation/blockdev/paride.txt
+F:	Documentation/admin-guide/blockdev/paride.rst
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
@@ -12264,7 +12264,7 @@ M:	Kurt Schwemmer <kurt.schwemmer@microsemi.com>
 M:	Logan Gunthorpe <logang@deltatee.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/switchtec.txt
+F:	Documentation/driver-api/switchtec.rst
 F:	Documentation/ABI/testing/sysfs-class-switchtec
 F:	drivers/pci/switch/switchtec*
 F:	include/uapi/linux/switchtec_ioctl.h
@@ -13036,7 +13036,7 @@ M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-pwm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
-F:	Documentation/pwm.txt
+F:	Documentation/driver-api/pwm.rst
 F:	Documentation/devicetree/bindings/pwm/
 F:	include/linux/pwm.h
 F:	drivers/pwm/
@@ -13397,7 +13397,7 @@ F:	drivers/net/wireless/ralink/rt2x00/
 RAMDISK RAM BLOCK DEVICE DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 S:	Maintained
-F:	Documentation/blockdev/ramdisk.txt
+F:	Documentation/admin-guide/blockdev/ramdisk.rst
 F:	drivers/block/brd.c
 
 RANCHU VIRTUAL BOARD FOR MIPS
@@ -13506,7 +13506,7 @@ Q:	http://patchwork.ozlabs.org/project/rtc-linux/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/rtc/
-F:	Documentation/rtc.txt
+F:	Documentation/admin-guide/rtc.rst
 F:	drivers/rtc/
 F:	include/linux/rtc.h
 F:	include/uapi/linux/rtc.h
@@ -13650,7 +13650,7 @@ W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
-F:	Documentation/rfkill.txt
+F:	Documentation/driver-api/rfkill.rst
 F:	Documentation/ABI/stable/sysfs-class-rfkill
 F:	net/rfkill/
 F:	include/linux/rfkill.h
@@ -13719,7 +13719,7 @@ ROCKETPORT DRIVER
 P:	Comtrol Corp.
 W:	http://www.comtrol.com
 S:	Maintained
-F:	Documentation/serial/rocket.rst
+F:	Documentation/driver-api/serial/rocket.rst
 F:	drivers/tty/rocket*
 
 ROCKETPORT EXPRESS/INFINITY DRIVER
@@ -14113,7 +14113,7 @@ M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/phy/samsung-phy.txt
-F:	Documentation/phy/samsung-usb2.txt
+F:	Documentation/driver-api/phy/samsung-usb2.rst
 F:	drivers/phy/samsung/phy-exynos4210-usb2.c
 F:	drivers/phy/samsung/phy-exynos4x12-usb2.c
 F:	drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -14419,7 +14419,7 @@ SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
 M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
-F:	Documentation/ia64/serial.txt
+F:	Documentation/ia64/serial.rst
 F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
@@ -14925,7 +14925,7 @@ M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
 W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
-F:	Documentation/laptops/sony-laptop.txt
+F:	Documentation/admin-guide/laptops/sony-laptop.rst
 F:	drivers/char/sonypi.c
 F:	drivers/platform/x86/sony-laptop.c
 F:	include/linux/sony-laptop.h
@@ -15343,7 +15343,7 @@ SVGA HANDLING
 M:	Martin Mares <mj@ucw.cz>
 L:	linux-video@atrey.karlin.mff.cuni.cz
 S:	Maintained
-F:	Documentation/svga.txt
+F:	Documentation/admin-guide/svga.rst
 F:	arch/x86/boot/video*
 
 SWIOTLB SUBSYSTEM
@@ -15380,7 +15380,7 @@ F:	drivers/dma-buf/dma-fence*
 F:	drivers/dma-buf/sw_sync.c
 F:	include/linux/sync_file.h
 F:	include/uapi/linux/sync_file.h
-F:	Documentation/sync_file.txt
+F:	Documentation/driver-api/sync_file.rst
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 SYNOPSYS ARC ARCHITECTURE
@@ -16001,7 +16001,7 @@ F:	sound/soc/codecs/isabelle*
 TI LP855x BACKLIGHT DRIVER
 M:	Milo Kim <milo.kim@ti.com>
 S:	Maintained
-F:	Documentation/backlight/lp855x-driver.txt
+F:	Documentation/driver-api/backlight/lp855x-driver.rst
 F:	drivers/video/backlight/lp855x_bl.c
 F:	include/linux/platform_data/lp855x.h
 
@@ -16265,7 +16265,7 @@ M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 M:	Jiri Slaby <jslaby@suse.com>
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
-F:	Documentation/serial/
+F:	Documentation/driver-api/serial/
 F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
@@ -16876,7 +16876,7 @@ R:	Cornelia Huck <cohuck@redhat.com>
 L:	kvm@vger.kernel.org
 T:	git git://github.com/awilliam/linux-vfio.git
 S:	Maintained
-F:	Documentation/vfio.txt
+F:	Documentation/driver-api/vfio.rst
 F:	drivers/vfio/
 F:	include/linux/vfio.h
 F:	include/uapi/linux/vfio.h
@@ -16885,7 +16885,7 @@ VFIO MEDIATED DEVICE DRIVERS
 M:	Kirti Wankhede <kwankhede@nvidia.com>
 L:	kvm@vger.kernel.org
 S:	Maintained
-F:	Documentation/vfio-mediated-device.txt
+F:	Documentation/driver-api/vfio-mediated-device.rst
 F:	drivers/vfio/mdev/
 F:	include/linux/mdev.h
 F:	samples/vfio-mdev/
@@ -17760,7 +17760,7 @@ R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/
-F:	Documentation/blockdev/zram.txt
+F:	Documentation/admin-guide/blockdev/zram.rst
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2bf1ce39a96d..600c5ba1af41 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1297,7 +1297,7 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
-	  <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
 	  If you don't know what to do here, say N.
@@ -2036,7 +2036,7 @@ config CRASH_DUMP
 	  kdump/kexec. The crash dump kernel must be compiled to a
 	  memory address not used by the main kernel
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
@@ -2142,7 +2142,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
+	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index e24ad60891b2..8a9aeeb504dd 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -21,7 +21,7 @@
 /*
  * The public API for this code is documented in arch/arm/include/asm/mcpm.h.
  * For a comprehensive description of the main algorithm used here, please
- * see Documentation/arm/cluster-pm-race-avoidance.txt.
+ * see Documentation/arm/cluster-pm-race-avoidance.rst.
  */
 
 struct sync_struct mcpm_sync;
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index d5bd75dd576d..291d969bc719 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -5,7 +5,7 @@
  * Created by:  Nicolas Pitre, March 2012
  * Copyright:   (C) 2012-2013  Linaro Limited
  *
- * Refer to Documentation/arm/cluster-pm-race-avoidance.txt
+ * Refer to Documentation/arm/cluster-pm-race-avoidance.rst
  * for details of the synchronisation algorithms used here.
  */
 
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
index 9675cc15d0c4..f1c7fd44f1b1 100644
--- a/arch/arm/common/vlock.S
+++ b/arch/arm/common/vlock.S
@@ -6,7 +6,7 @@
  * Copyright:	(C) 2012-2013  Linaro Limited
  *
  * This algorithm is described in more detail in
- * Documentation/arm/vlocks.txt.
+ * Documentation/arm/vlocks.rst.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 77e5582c2259..67d20712cb48 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -5,7 +5,7 @@
  *  Copyright (C) 1997-1999 Russell King
  *
  *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/Setup
+ *  hardware it's running on.  See Documentation/arm/setup.rst
  *  for more info.
  */
 #ifndef __ASMARM_SETUP_H
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 6b335a9ff8c8..25ceda63b284 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  *
  *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/Setup
+ *  hardware it's running on.  See Documentation/arm/setup.rst
  *  for more info.
  */
 #ifndef _UAPI__ASMARM_SETUP_H
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0b8cfdd60b90..858d4e541532 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -826,7 +826,7 @@ ENDPROC(__switch_to)
  * existing ones.  This mechanism should be used only for things that are
  * really small and justified, and not be abused freely.
  *
- * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
+ * See Documentation/arm/kernel_user_helpers.rst for formal definitions.
  */
  THUMB(	.arm	)
 
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index c93356a8d662..56411bb63d45 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -106,7 +106,7 @@ void exynos_firmware_init(void);
 #define C2_STATE	(1 << 3)
 /*
  * Magic values for bootloader indicating chosen low power mode.
- * See also Documentation/arm/Samsung/Bootloader-interface.txt
+ * See also Documentation/arm/samsung/bootloader-interface.rst
  */
 #define EXYNOS_SLEEP_MAGIC	0x00000bad
 #define EXYNOS_AFTR_MAGIC	0xfcba0d10
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fc5378b00f3d..f7211b57b1e7 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -33,7 +33,7 @@ config MACH_AVILA
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
-	  see <file:Documentation/arm/IXP4xx>.
+	  see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_LOFT
     bool "Loft"
@@ -49,7 +49,7 @@ config ARCH_ADI_COYOTE
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
-	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+	  information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_GATEWAY7001
 	bool "Gateway 7001"
@@ -72,21 +72,21 @@ config ARCH_IXDP425
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_IXDPG425
 	bool "IXDPG425"
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_IXDP465
 	bool "IXDP465"
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDP465 Development Platform (Also known as BMP).
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_GORAMO_MLR
 	bool "GORAMO Multi Link Router"
@@ -99,7 +99,7 @@ config MACH_KIXRP435
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  KIXRP435 Reference Platform.
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 #
 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
@@ -116,7 +116,7 @@ config ARCH_PRPMC1100
 	help
 	  Say 'Y' here if you want your kernel to support the Motorola
 	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see <file:Documentation/arm/IXP4xx>.
+	  this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
 config MACH_NAS100D
 	bool
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index adcb90645460..c64988c609ad 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -5,7 +5,7 @@
 //
 // S3C24XX Power Manager (Suspend-To-RAM) support
 //
-// See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
 //
 // Parts based on arch/arm/mach-pxa/pm.c
 //
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cc798115aa9b..820b60a50125 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -709,7 +709,7 @@ config ARM_VIRT_EXT
 	  assistance.
 
 	  A compliant bootloader is required in order to make maximum
-	  use of this feature.  Refer to Documentation/arm/Booting for
+	  use of this feature.  Refer to Documentation/arm/booting.rst for
 	  details.
 
 config SWP_EMULATE
@@ -875,7 +875,7 @@ config KUSER_HELPERS
 	  the CPU type fitted to the system.  This permits binaries to be
 	  run on ARMv4 through to ARMv7 without modification.
 
-	  See Documentation/arm/kernel_user_helpers.txt for details.
+	  See Documentation/arm/kernel_user_helpers.rst for details.
 
 	  However, the fixed address nature of these helpers can be used
 	  by ROP (return orientated programming) authors when creating
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 53da57fba39c..301e572651c0 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -243,7 +243,7 @@ config SAMSUNG_PM_DEBUG
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
 	  for more information.
 
 config S3C_PM_DEBUG_LED_SMDK
@@ -268,7 +268,7 @@ config SAMSUNG_PM_CHECK
 	  Note, this can take several seconds depending on memory size
 	  and CPU speed.
 
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
 
 config SAMSUNG_PM_CHECK_CHUNKSIZE
 	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
@@ -280,7 +280,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
 	  the CRC data block will take more memory, but will identify any
 	  faults with better precision.
 
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
 
 config SAMSUNG_WAKEMASK
 	bool
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 4eac94c1eb6f..9e74c7ff6b04 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -7,7 +7,7 @@
 #   http://www.arm.linux.org.uk/developer/machines/download.php
 #
 # Please do not send patches to this file; it is automatically generated!
-# To add an entry into this database, please see Documentation/arm/README,
+# To add an entry into this database, please see Documentation/arm/arm.rst,
 # or visit:
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a36ff61321ce..86f81b5afd95 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -996,7 +996,7 @@ config CRASH_DUMP
 	  reserved region and then later executed after a crash by
 	  kdump/kexec.
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config XEN_DOM0
 	def_bool y
@@ -1142,7 +1142,7 @@ config KUSER_HELPERS
 	  the system. This permits binaries to be run on ARMv4 through
 	  to ARMv8 without modification.
 
-	  See Documentation/arm/kernel_user_helpers.txt for details.
+	  See Documentation/arm/kernel_user_helpers.rst for details.
 
 	  However, the fixed address nature of these helpers can be used
 	  by ROP (return orientated programming) authors when creating
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 49825e9e421e..42bd8c0c60e0 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -10,7 +10,7 @@
  * aarch32_setup_additional_pages() and are provided for compatibility
  * reasons with 32 bit (aarch32) applications that need them.
  *
- * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
+ * See Documentation/arm/kernel_user_helpers.rst for formal definitions.
  */
 
 #include <asm/unistd.h>
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 8f106638913c..3795d18276c4 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -852,7 +852,7 @@ valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
 	 * /dev/mem reads and writes use copy_to_user(), which implicitly
 	 * uses a granule-sized kernel identity mapping.  It's really
 	 * only safe to do this for regions in kern_memmap.  For more
-	 * details, see Documentation/ia64/aliasing.txt.
+	 * details, see Documentation/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB || attr & EFI_MEMORY_UC)
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index d80c99a5f55d..0750a716adc7 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -28,7 +28,7 @@
 #include <asm/native/inst.h>
 
 /*
- * See Documentation/ia64/fsys.txt for details on fsyscalls.
+ * See Documentation/ia64/fsys.rst for details on fsyscalls.
  *
  * On entry to an fsyscall handler:
  *   r10	= 0 (i.e., defaults to "successful syscall return")
diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c
index 5e3e7b1fdac5..0c0de2c4ec69 100644
--- a/arch/ia64/mm/ioremap.c
+++ b/arch/ia64/mm/ioremap.c
@@ -42,7 +42,7 @@ ioremap (unsigned long phys_addr, unsigned long size)
 	/*
 	 * For things in kern_memmap, we must use the same attribute
 	 * as the rest of the kernel.  For more details, see
-	 * Documentation/ia64/aliasing.txt.
+	 * Documentation/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index e308196c2229..165e561dc81a 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -450,7 +450,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 		return -ENOSYS;
 
 	/*
-	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt
+	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.rst
 	 * for more details.
 	 */
 	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 1738a06396f9..2f81a94c71a6 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -162,7 +162,7 @@ void __init plat_mem_setup(void)
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 
-	/* intended to somewhat resemble ARM; see Documentation/arm/Booting */
+	/* intended to somewhat resemble ARM; see Documentation/arm/booting.rst */
 	if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
 		dtb = phys_to_virt(fw_arg2);
 	else if (fw_passed_dtb) /* UHI interface or appended dtb */
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 42875ff15671..6d732e451071 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -277,7 +277,7 @@ config SMP
 	  machines, but will use only one CPU of a multiprocessor machine.
 	  On a uniprocessor machine, the kernel will run faster if you say N.
 
-	  See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
+	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 31a7d12db705..6b1b5941b618 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -626,7 +626,7 @@ config CRASH_DUMP
 	  to a memory address not used by the main kernel using
 	  PHYSICAL_START.
 
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
@@ -679,7 +679,7 @@ config SMP
 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below.
 
-	  See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
+	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e9f5d62e9817..7926a2e11bdc 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -180,7 +180,7 @@ config SMP
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
+	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 879741336771..57d3b5d96bd2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -402,7 +402,7 @@ config SMP
 	  Management" code will be disabled if you say Y here.
 
 	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
-	  <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
@@ -1959,7 +1959,7 @@ config EFI_STUB
           This kernel feature allows a bzImage to be loaded directly
 	  by EFI firmware without the use of a bootloader.
 
-	  See Documentation/efi-stub.txt for more information.
+	  See Documentation/admin-guide/efi-stub.rst for more information.
 
 config EFI_MIXED
 	bool "EFI mixed-mode support"
@@ -2057,7 +2057,7 @@ config CRASH_DUMP
 	  to a memory address not used by the main kernel or BIOS using
 	  PHYSICAL_START, or it must be built as a relocatable image
 	  (CONFIG_RELOCATABLE=y).
-	  For more details see Documentation/kdump/kdump.rst
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump"
@@ -2094,7 +2094,7 @@ config PHYSICAL_START
 	  the reserved region.  In other words, it can be set based on
 	  the "X" value as specified in the "crashkernel=YM@XM"
 	  command line boot parameter passed to the panic-ed
-	  kernel. Please take a look at Documentation/kdump/kdump.rst
+	  kernel. Please take a look at Documentation/admin-guide/kdump/kdump.rst
 	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 323d05789159..3b054d2bede0 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -42,7 +42,7 @@
 #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
 /*
  * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
- * For details see Documentation/xtensa/atomctl.txt
+ * For details see Documentation/xtensa/atomctl.rst
  */
 #if XCHAL_DCACHE_IS_COHERENT
 	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,
diff --git a/block/Kconfig b/block/Kconfig
index 56cb1695cd87..8b5f8e560eb4 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -89,7 +89,7 @@ config BLK_DEV_THROTTLING
 	one needs to mount and use blkio cgroup controller for creating
 	cgroups and specifying per device IO rate policies.
 
-	See Documentation/cgroup-v1/blkio-controller.rst for more information.
+	See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information.
 
 config BLK_DEV_THROTTLING_LOW
 	bool "Block throttling .low limit interface support (EXPERIMENTAL)"
@@ -110,7 +110,7 @@ config BLK_CMDLINE_PARSER
 	which don't otherwise have any standardized method for listing the
 	partitions on a block device.
 
-	See Documentation/block/cmdline-partition.txt for more information.
+	See Documentation/block/cmdline-partition.rst for more information.
 
 config BLK_WBT
 	bool "Enable support for block device writeback throttling"
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 7a6b2f29a582..b89310a022ad 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -26,7 +26,7 @@ config IOSCHED_BFQ
 	regardless of the device parameters and with any workload. It
 	also guarantees a low latency to interactive and soft
 	real-time applications.  Details in
-	Documentation/block/bfq-iosched.txt
+	Documentation/block/bfq-iosched.rst
 
 config BFQ_GROUP_IOSCHED
        bool "BFQ hierarchical scheduling support"
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 50c9d2598500..72860325245a 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -17,7 +17,7 @@
  * low-latency capabilities. BFQ also supports full hierarchical
  * scheduling through cgroups. Next paragraphs provide an introduction
  * on BFQ inner workings. Details on BFQ benefits, usage and
- * limitations can be found in Documentation/block/bfq-iosched.txt.
+ * limitations can be found in Documentation/block/bfq-iosched.rst.
  *
  * BFQ is a proportional-share storage-I/O scheduling algorithm based
  * on the slice-by-slice service scheme of CFQ. But BFQ assigns
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 825c9c070458..ca39b4624cf8 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -383,7 +383,7 @@ static const struct blk_integrity_profile nop_profile = {
  * send/receive integrity metadata it must use this function to register
  * the capability with the block layer. The template is a blk_integrity
  * struct with values appropriate for the underlying hardware. See
- * Documentation/block/data-integrity.txt.
+ * Documentation/block/data-integrity.rst.
  */
 void blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 {
diff --git a/block/ioprio.c b/block/ioprio.c
index 2e0559f157c8..77bcab11dce5 100644
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -17,7 +17,7 @@
  *
  * ioprio_set(PRIO_PROCESS, pid, prio);
  *
- * See also Documentation/block/ioprio.txt
+ * See also Documentation/block/ioprio.rst
  *
  */
 #include <linux/gfp.h>
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index b8a682b5a1bb..2a2a2e82832e 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -25,7 +25,7 @@
 #include "blk-mq-sched.h"
 
 /*
- * See Documentation/block/deadline-iosched.txt
+ * See Documentation/block/deadline-iosched.rst
  */
 static const int read_expire = HZ / 2;  /* max time before a read is submitted. */
 static const int write_expire = 5 * HZ; /* ditto for writes, these limits are SOFT! */
diff --git a/block/partitions/Kconfig b/block/partitions/Kconfig
index 37b9710cc80a..702689a628f0 100644
--- a/block/partitions/Kconfig
+++ b/block/partitions/Kconfig
@@ -194,7 +194,7 @@ config LDM_PARTITION
 	  Normal partitions are now called Basic Disks under Windows 2000, XP,
 	  and Vista.
 
-	  For a fuller description read <file:Documentation/ldm.txt>.
+	  For a fuller description read <file:Documentation/admin-guide/ldm.rst>.
 
 	  If unsure, say N.
 
diff --git a/block/partitions/cmdline.c b/block/partitions/cmdline.c
index 60fb3df9897c..f1edd5452249 100644
--- a/block/partitions/cmdline.c
+++ b/block/partitions/cmdline.c
@@ -11,7 +11,7 @@
  *
  * The format for the command line is just like mtdparts.
  *
- * For further information, see "Documentation/block/cmdline-partition.txt"
+ * For further information, see "Documentation/block/cmdline-partition.rst"
  *
  */
 
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 713903290385..506a0175a5a7 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -5,7 +5,7 @@
  * Copyright (c) 2002-3 Patrick Mochel
  * Copyright (c) 2002-3 Open Source Development Labs
  *
- * Please see Documentation/driver-model/platform.rst for more
+ * Please see Documentation/driver-api/driver-model/platform.rst for more
  * information.
  */
 
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 96ec7e0fc1ea..1bb8ec575352 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -31,7 +31,7 @@ config BLK_DEV_FD
 	  If you want to use the floppy disk drive(s) of your PC under Linux,
 	  say Y. Information about this driver, especially important for IBM
 	  Thinkpad users, is contained in
-	  <file:Documentation/blockdev/floppy.txt>.
+	  <file:Documentation/admin-guide/blockdev/floppy.rst>.
 	  That file also contains the location of the Floppy driver FAQ as
 	  well as location of the fdutils package used to configure additional
 	  parameters of the driver at run time.
@@ -96,7 +96,7 @@ config PARIDE
 	  your computer's parallel port. Most of them are actually IDE devices
 	  using a parallel port IDE adapter. This option enables the PARIDE
 	  subsystem which contains drivers for many of these external drives.
-	  Read <file:Documentation/blockdev/paride.txt> for more information.
+	  Read <file:Documentation/admin-guide/blockdev/paride.rst> for more information.
 
 	  If you have said Y to the "Parallel-port support" configuration
 	  option, you may share a single port between your printer and other
@@ -261,7 +261,7 @@ config BLK_DEV_NBD
 	  userland (making server and client physically the same computer,
 	  communicating using the loopback network device).
 
-	  Read <file:Documentation/blockdev/nbd.txt> for more information,
+	  Read <file:Documentation/admin-guide/blockdev/nbd.rst> for more information,
 	  especially about where to find the server code, which runs in user
 	  space and does not need special kernel support.
 
@@ -303,7 +303,7 @@ config BLK_DEV_RAM
 	  during the initial install of Linux.
 
 	  Note that the kernel command line option "ramdisk=XX" is now obsolete.
-	  For details, read <file:Documentation/blockdev/ramdisk.txt>.
+	  For details, read <file:Documentation/admin-guide/blockdev/ramdisk.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called brd. An alias "rd" has been defined
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b933a7eea52b..f652c1ac3ae9 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4424,7 +4424,7 @@ static int __init floppy_setup(char *str)
 		pr_cont("\n");
 	} else
 		DPRINT("botched floppy option\n");
-	DPRINT("Read Documentation/blockdev/floppy.txt\n");
+	DPRINT("Read Documentation/admin-guide/blockdev/floppy.rst\n");
 	return 0;
 }
 
diff --git a/drivers/block/zram/Kconfig b/drivers/block/zram/Kconfig
index 1ffc64770643..fe7a4b7d30cf 100644
--- a/drivers/block/zram/Kconfig
+++ b/drivers/block/zram/Kconfig
@@ -12,7 +12,7 @@ config ZRAM
 	  It has several use cases, for example: /tmp storage, use as swap
 	  disks and maybe many more.
 
-	  See Documentation/blockdev/zram.txt for more information.
+	  See Documentation/admin-guide/blockdev/zram.rst for more information.
 
 config ZRAM_WRITEBACK
        bool "Write back incompressible or idle page to backing device"
@@ -26,7 +26,7 @@ config ZRAM_WRITEBACK
 	 With /sys/block/zramX/{idle,writeback}, application could ask
 	 idle page's writeback to the backing device to save in memory.
 
-	 See Documentation/blockdev/zram.txt for more information.
+	 See Documentation/admin-guide/blockdev/zram.rst for more information.
 
 config ZRAM_MEMORY_TRACKING
 	bool "Track zRam block status"
@@ -36,4 +36,4 @@ config ZRAM_MEMORY_TRACKING
 	  of zRAM. Admin could see the information via
 	  /sys/kernel/debug/zram/zramX/block_state.
 
-	  See Documentation/blockdev/zram.txt for more information.
+	  See Documentation/admin-guide/blockdev/zram.rst for more information.
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 466ebd84ad17..3e866885a405 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -291,7 +291,7 @@ config RTC
 	  and set the RTC in an SMP compatible fashion.
 
 	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
 	  for details.
 
 	  To compile this driver as a module, choose M here: the
@@ -313,7 +313,7 @@ config JS_RTC
 	  /dev/rtc.
 
 	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
 	  for details.
 
 	  To compile this driver as a module, choose M here: the
@@ -382,7 +382,7 @@ config SONYPI
 	  Device which can be found in many (all ?) Sony Vaio laptops.
 
 	  If you have one of those laptops, read
-	  <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
+	  <file:Documentation/admin-guide/laptops/sonypi.rst>, and say Y or M here.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sonypi.
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 95be7228f327..9044d31ab1a1 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -4,7 +4,7 @@
  * Copyright 2006 Michael Buesch <m@bues.ch>
  * Copyright 2005 (c) MontaVista Software, Inc.
  *
- * Please read Documentation/hw_random.txt for details on use.
+ * Please read Documentation/admin-guide/hw_random.rst for details on use.
  *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
index 4ab14d58e85b..6f7cbf6c2b55 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -8,7 +8,7 @@
  * keysize in CBC and ECB mode.
  * Add support also for DES and 3DES in CBC and ECB mode.
  *
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arm/sunxi.rst
  */
 #include "sun4i-ss.h"
 
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
index cdcda7f059c8..2e8704271f45 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
@@ -6,7 +6,7 @@
  *
  * Core file which registers crypto algorithms supported by the SS.
  *
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
  */
 #include <linux/clk.h>
 #include <linux/crypto.h>
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
index d2b6d89aad28..fcffba5ef927 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
@@ -6,7 +6,7 @@
  *
  * This file add support for MD5 and SHA1.
  *
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arm/sunxi.rst
  */
 #include "sun4i-ss.h"
 #include <linux/scatterlist.h>
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss.h b/drivers/crypto/sunxi-ss/sun4i-ss.h
index 68b82d1a6303..8654d48aedc0 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss.h
+++ b/drivers/crypto/sunxi-ss/sun4i-ss.h
@@ -8,7 +8,7 @@
  * Support MD5 and SHA1 hash algorithms.
  * Support DES and 3DES
  *
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arm/sunxi.rst
  */
 
 #include <linux/clk.h>
diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig
index d5f915830b68..b6a9c2f1bc41 100644
--- a/drivers/dma-buf/Kconfig
+++ b/drivers/dma-buf/Kconfig
@@ -15,7 +15,7 @@ config SYNC_FILE
 	  associated with a buffer. When a job is submitted to the GPU a fence
 	  is attached to the buffer and is transferred via userspace, using Sync
 	  Files fds, to the DRM driver for example. More details at
-	  Documentation/sync_file.txt.
+	  Documentation/driver-api/sync_file.rst.
 
 config SW_SYNC
 	bool "Sync File Validation Framework"
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 43d7d6a9d9ab..bb13c266c329 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1312,7 +1312,7 @@ config GPIO_BT8XX
 	  The card needs to be physically altered for using it as a
 	  GPIO card. For more information on how to build a GPIO card
 	  from a BT8xx TV card, see the documentation file at
-	  Documentation/bt8xxgpio.txt
+	  Documentation/driver-api/bt8xxgpio.rst
 
 	  If unsure, say N.
 
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 3611a0571667..53b24e3ae7de 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -41,7 +41,7 @@ MODULE_PARM_DESC(mask, "GPIO channel mask.");
 
 /*
  * FIXME: convert this singleton driver to use the state container
- * design pattern, see Documentation/driver-model/design-patterns.rst
+ * design pattern, see Documentation/driver-api/driver-model/design-patterns.rst
  */
 static struct cs5535_gpio_chip {
 	struct gpio_chip chip;
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3313378c743b..1d80222587ad 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -141,7 +141,7 @@ config DRM_LOAD_EDID_FIRMWARE
 	  monitor are unable to provide appropriate EDID data. Since this
 	  feature is provided as a workaround for broken hardware, the
 	  default case is N. Details and instructions how to build your own
-	  EDID data are given in Documentation/EDID/howto.rst.
+	  EDID data are given in Documentation/driver-api/edid.rst.
 
 config DRM_DP_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 9441a36a2469..bd810454d239 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -736,7 +736,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = {
  *     };
  *
  * Please make sure that you follow all the best practices from
- * ``Documentation/ioctl/botching-up-ioctls.txt``. Note that drm_ioctl()
+ * ``Documentation/ioctl/botching-up-ioctls.rst``. Note that drm_ioctl()
  * automatically zero-extends structures, hence make sure you can add more stuff
  * at the end, i.e. don't put a variable sized array there.
  *
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index 53187821df01..fcfe1a03c4a1 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -36,7 +36,7 @@
  * of extra utility/tracking out of our acquire-ctx.  This is provided
  * by &struct drm_modeset_lock and &struct drm_modeset_acquire_ctx.
  *
- * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.txt
+ * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.rst
  *
  * The basic usage pattern is to::
  *
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index 92f6e1ae23a2..f11ba7f2dca7 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -22,7 +22,7 @@
  * in the kernel). So this driver offers straight forward, reliable single
  * touch functionality only.
  *
- * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi.rst)
  * (looks like the description in the A20 User Manual v1.3 is better
  * than the one in the A10 User Manual v.1.5)
  */
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 5ccac0b77f17..3834332f4963 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -453,7 +453,7 @@ config DM_INIT
 	Enable "dm-mod.create=" parameter to create mapped devices at init time.
 	This option is useful to allow mounting rootfs without requiring an
 	initramfs.
-	See Documentation/device-mapper/dm-init.rst for dm-mod.create="..."
+	See Documentation/admin-guide/device-mapper/dm-init.rst for dm-mod.create="..."
 	format.
 
 	If unsure, say N.
diff --git a/drivers/md/dm-init.c b/drivers/md/dm-init.c
index b65faef2c4b5..b869316d3722 100644
--- a/drivers/md/dm-init.c
+++ b/drivers/md/dm-init.c
@@ -25,7 +25,7 @@ static char *create;
  * Format: dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
  * Table format: <start_sector> <num_sectors> <target_type> <target_args>
  *
- * See Documentation/device-mapper/dm-init.rst for dm-mod.create="..." format
+ * See Documentation/admin-guide/device-mapper/dm-init.rst for dm-mod.create="..." format
  * details.
  */
 
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 7a87a640f8ba..8a60a4a070ac 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3558,7 +3558,7 @@ static void raid_status(struct dm_target *ti, status_type_t type,
 		 * v1.5.0+:
 		 *
 		 * Sync action:
-		 *   See Documentation/device-mapper/dm-raid.rst for
+		 *   See Documentation/admin-guide/device-mapper/dm-raid.rst for
 		 *   information on each of these states.
 		 */
 		DMEMIT(" %s", sync_action);
diff --git a/drivers/mtd/nand/raw/nand_ecc.c b/drivers/mtd/nand/raw/nand_ecc.c
index 223fbd8052b3..09fdced659f5 100644
--- a/drivers/mtd/nand/raw/nand_ecc.c
+++ b/drivers/mtd/nand/raw/nand_ecc.c
@@ -11,7 +11,7 @@
  *   Thomas Gleixner (tglx@linutronix.de)
  *
  * Information on how this algorithm works and how it was developed
- * can be found in Documentation/mtd/nand_ecc.txt
+ * can be found in Documentation/driver-api/mtd/nand_ecc.rst
  */
 
 #include <linux/types.h>
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 41c90f2ddb31..63db08d9bafa 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2286,7 +2286,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	struct ice_hw *hw;
 	int err;
 
-	/* this driver uses devres, see Documentation/driver-model/devres.rst */
+	/* this driver uses devres, see Documentation/driver-api/driver-model/devres.rst */
 	err = pcim_enable_device(pdev);
 	if (err)
 		return err;
diff --git a/drivers/nvdimm/Kconfig b/drivers/nvdimm/Kconfig
index 54500798f23a..a5fde15e91d3 100644
--- a/drivers/nvdimm/Kconfig
+++ b/drivers/nvdimm/Kconfig
@@ -33,7 +33,7 @@ config BLK_DEV_PMEM
 	  Documentation/admin-guide/kernel-parameters.rst).  This driver converts
 	  these persistent memory ranges into block devices that are
 	  capable of DAX (direct-access) file system mappings.  See
-	  Documentation/nvdimm/nvdimm.txt for more details.
+	  Documentation/driver-api/nvdimm/nvdimm.rst for more details.
 
 	  Say Y if you want to use an NVDIMM
 
diff --git a/drivers/pci/switch/Kconfig b/drivers/pci/switch/Kconfig
index aee28a5bb98f..d370f4ce0492 100644
--- a/drivers/pci/switch/Kconfig
+++ b/drivers/pci/switch/Kconfig
@@ -9,7 +9,7 @@ config PCI_SW_SWITCHTEC
 	 Enables support for the management interface for the MicroSemi
 	 Switchtec series of PCIe switches. Supports userspace access
 	 to submit MRPC commands to the switch via /dev/switchtecX
-	 devices. See <file:Documentation/switchtec.txt> for more
+	 devices. See <file:Documentation/driver-api/switchtec.rst> for more
 	 information.
 
 endmenu
diff --git a/drivers/perf/qcom_l3_pmu.c b/drivers/perf/qcom_l3_pmu.c
index 15b8c10c2b2b..656e830798d9 100644
--- a/drivers/perf/qcom_l3_pmu.c
+++ b/drivers/perf/qcom_l3_pmu.c
@@ -8,7 +8,7 @@
  * the slices. User space needs to aggregate to individual counts to provide
  * a global picture.
  *
- * See Documentation/perf/qcom_l3_pmu.txt for more details.
+ * See Documentation/admin-guide/perf/qcom_l3_pmu.rst for more details.
  *
  * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
  */
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index cc29fe79c283..1b67bb578f9f 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -118,7 +118,7 @@ config DCDBAS
 	  Interrupts (SMIs) and Host Control Actions (system power cycle or
 	  power off after OS shutdown) on certain Dell systems.
 
-	  See <file:Documentation/dcdbas.txt> for more details on the driver
+	  See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
 	  and the Dell systems on which Dell systems management software makes
 	  use of this driver.
 
@@ -259,7 +259,7 @@ config DELL_RBU
 	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
 	 supporting application to communicate with the BIOS regarding the new
 	 image for the image update to take effect.
-	 See <file:Documentation/dell_rbu.txt> for more details on the driver.
+	 See <file:Documentation/driver-api/dell_rbu.rst> for more details on the driver.
 
 
 config FUJITSU_LAPTOP
@@ -448,7 +448,7 @@ config SONY_LAPTOP
 	  screen brightness control, Fn keys and allows powering on/off some
 	  devices.
 
-	  Read <file:Documentation/laptops/sony-laptop.txt> for more information.
+	  Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information.
 
 config SONYPI_COMPAT
 	bool "Sonypi compatibility"
@@ -500,7 +500,7 @@ config THINKPAD_ACPI
 	  support for Fn-Fx key combinations, Bluetooth control, video
 	  output switching, ThinkLight control, UltraBay eject and more.
 	  For more information about this driver see
-	  <file:Documentation/laptops/thinkpad-acpi.txt> and
+	  <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
 	  <http://ibm-acpi.sf.net/> .
 
 	  This driver was formerly known as ibm-acpi.
diff --git a/drivers/platform/x86/dcdbas.c b/drivers/platform/x86/dcdbas.c
index 12cf9475ac85..84f4cc839cc3 100644
--- a/drivers/platform/x86/dcdbas.c
+++ b/drivers/platform/x86/dcdbas.c
@@ -7,7 +7,7 @@
  *  and Host Control Actions (power cycle or power off after OS shutdown) on
  *  Dell systems.
  *
- *  See Documentation/dcdbas.txt for more information.
+ *  See Documentation/driver-api/dcdbas.rst for more information.
  *
  *  Copyright (C) 1995-2006 Dell Inc.
  */
diff --git a/drivers/platform/x86/dell_rbu.c b/drivers/platform/x86/dell_rbu.c
index a58fc10293ee..3691391fea6b 100644
--- a/drivers/platform/x86/dell_rbu.c
+++ b/drivers/platform/x86/dell_rbu.c
@@ -24,7 +24,7 @@
  * on every time the packet data is written. This driver requires an
  * application to break the BIOS image in to fixed sized packet chunks.
  *
- * See Documentation/dell_rbu.txt for more info.
+ * See Documentation/driver-api/dell_rbu.rst for more info.
  */
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/drivers/pnp/isapnp/Kconfig b/drivers/pnp/isapnp/Kconfig
index 4b58a3dcb52b..d0479a563123 100644
--- a/drivers/pnp/isapnp/Kconfig
+++ b/drivers/pnp/isapnp/Kconfig
@@ -7,6 +7,6 @@ config ISAPNP
 	depends on ISA || COMPILE_TEST
 	help
 	  Say Y here if you would like support for ISA Plug and Play devices.
-	  Some information is in <file:Documentation/isapnp.txt>.
+	  Some information is in <file:Documentation/driver-api/isapnp.rst>.
 
 	  If unsure, say Y.
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index fadafc64705f..677d1aff61b7 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -86,7 +86,7 @@ config RAPIDIO_CHMAN
 	  This option includes RapidIO channelized messaging driver which
 	  provides socket-like interface to allow sharing of single RapidIO
 	  messaging mailbox between multiple user-space applications.
-	  See "Documentation/rapidio/rio_cm.txt" for driver description.
+	  See "Documentation/driver-api/rapidio/rio_cm.rst" for driver description.
 
 config RAPIDIO_MPORT_CDEV
 	tristate "RapidIO /dev mport device driver"
diff --git a/drivers/staging/unisys/Documentation/overview.txt b/drivers/staging/unisys/Documentation/overview.txt
index 9ab30af265a5..f8a4144b239c 100644
--- a/drivers/staging/unisys/Documentation/overview.txt
+++ b/drivers/staging/unisys/Documentation/overview.txt
@@ -15,7 +15,7 @@ normally be unsharable, specifically:
 * visorinput - keyboard and mouse
 
 These drivers conform to the standard Linux bus/device model described
-within Documentation/driver-model/, and utilize a driver named visorbus to
+within Documentation/driver-api/driver-model/, and utilize a driver named visorbus to
 present the virtual busses involved. Drivers in the 'visor*' driver set are
 commonly referred to as "guest drivers" or "client drivers".  All drivers
 except visorbus expose a device of a specific usable class to the Linux guest
@@ -141,7 +141,7 @@ called automatically by the visorbus driver at appropriate times:
 -----------------------------------
 
 Because visorbus is a standard Linux bus driver in the model described in
-Documentation/driver-model/, the hierarchy of s-Par virtual devices is
+Documentation/driver-api/driver-model/, the hierarchy of s-Par virtual devices is
 published in the sysfs tree beneath /bus/visorbus/, e.g.,
 /sys/bus/visorbus/devices/ might look like:
 
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 0e3e4dacbc12..c7623f99ac0f 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -93,7 +93,7 @@ config VT_HW_CONSOLE_BINDING
          select the console driver that will serve as the backend for the
          virtual terminals.
 
-	 See <file:Documentation/console/console.txt> for more
+	 See <file:Documentation/driver-api/console.rst> for more
 	 information. For framebuffer console users, please refer to
 	 <file:Documentation/fb/fbcon.rst>.
 
@@ -175,7 +175,7 @@ config ROCKETPORT
 	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
           These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
           modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/serial/rocket.rst>.
+          and this driver read <file:Documentation/driver-api/serial/rocket.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rocket.
@@ -193,7 +193,7 @@ config CYCLADES
 	  your Linux box, for instance in order to become a dial-in server.
 
 	  For information about the Cyclades-Z card, read
-	  <file:Documentation/serial/cyclades_z.rst>.
+	  <file:Documentation/driver-api/serial/cyclades_z.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called cyclades.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b416c7b33f49..04c23951b831 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -500,7 +500,7 @@ config SERIAL_SA1100
 	help
 	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
 	  can enable its onboard serial port by enabling this option.
-	  Please read <file:Documentation/arm/SA1100/serial_UART> for further
+	  Please read <file:Documentation/arm/sa1100/serial_uart.rst> for further
 	  info.
 
 config SERIAL_SA1100_CONSOLE
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 6e3c66ab0e62..a0555ae2b1ef 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1081,7 +1081,7 @@ static int qe_uart_verify_port(struct uart_port *port,
 }
 /* UART operations
  *
- * Details on these functions can be found in Documentation/serial/driver.rst
+ * Details on these functions can be found in Documentation/driver-api/serial/driver.rst
  */
 static const struct uart_ops qe_uart_pops = {
 	.tx_empty       = qe_uart_tx_empty,
diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
index e5a7a454fe17..fd17db9b432f 100644
--- a/drivers/vfio/Kconfig
+++ b/drivers/vfio/Kconfig
@@ -25,7 +25,7 @@ menuconfig VFIO
 	select VFIO_IOMMU_TYPE1 if (X86 || S390 || ARM || ARM64)
 	help
 	  VFIO provides a framework for secure userspace device drivers.
-	  See Documentation/vfio.txt for more details.
+	  See Documentation/driver-api/vfio.rst for more details.
 
 	  If you don't know what to do here, say N.
 
diff --git a/drivers/vfio/mdev/Kconfig b/drivers/vfio/mdev/Kconfig
index ba94a076887f..5da27f2100f9 100644
--- a/drivers/vfio/mdev/Kconfig
+++ b/drivers/vfio/mdev/Kconfig
@@ -6,7 +6,7 @@ config VFIO_MDEV
 	default n
 	help
 	  Provides a framework to virtualize devices.
-	  See Documentation/vfio-mediated-device.txt for more details.
+	  See Documentation/driver-api/vfio-mediated-device.rst for more details.
 
 	  If you don't know what do here, say N.
 
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 03dd57581df7..3e7ad7b232fe 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -19,7 +19,7 @@ config W1_CON
 	default y
 	---help---
 	  This allows to communicate with userspace using connector. For more
-	  information see <file:Documentation/connector/connector.txt>.
+	  information see <file:Documentation/driver-api/connector.rst>.
 	  There are three types of messages between w1 core and userspace:
 	  1. Events. They are generated each time new master or slave device found
 		either due to automatic or requested search.
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
index 4c3dcb718961..47d2651fd9dc 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
@@ -72,7 +72,7 @@ config PROC_SYSCTL
 	  interface is through /proc/sys.  If you say Y here a tree of
 	  modifiable sysctl entries will be generated beneath the
           /proc/sys directory. They are explained in the files
-	  in <file:Documentation/sysctl/>.  Note that enabling this
+	  in <file:Documentation/admin-guide/sysctl/>.  Note that enabling this
 	  option will enlarge the kernel by at least 8 KB.
 
 	  As it is generally a good thing, you should say Y here unless
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index c5311935239d..430e219e3aba 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -624,7 +624,7 @@ struct cftype {
 
 /*
  * Control Group subsystem type.
- * See Documentation/cgroup-v1/cgroups.rst for details
+ * See Documentation/admin-guide/cgroup-v1/cgroups.rst for details
  */
 struct cgroup_subsys {
 	struct cgroup_subsys_state *(*css_alloc)(struct cgroup_subsys_state *parent_css);
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 1d72ef76f24f..6b6c7396a584 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -55,10 +55,71 @@ struct cn_dev {
 	struct cn_queue_dev *cbdev;
 };
 
+/**
+ * cn_add_callback() - Registers new callback with connector core.
+ *
+ * @id:		unique connector's user identifier.
+ *		It must be registered in connector.h for legal
+ *		in-kernel users.
+ * @name:	connector's callback symbolic name.
+ * @callback:	connector's callback.
+ * 		parameters are %cn_msg and the sender's credentials
+ */
 int cn_add_callback(struct cb_id *id, const char *name,
 		    void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
-void cn_del_callback(struct cb_id *);
+/**
+ * cn_del_callback() - Unregisters new callback with connector core.
+ *
+ * @id:		unique connector's user identifier.
+ */
+void cn_del_callback(struct cb_id *id);
+
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg: 	message header(with attached data).
+ * @len:	Number of @msg to be sent.
+ * @portid:	destination port.
+ *		If non-zero the message will be sent to the given port,
+ *		which should be set to the original sender.
+ * @group:	destination group.
+ * 		If @portid and @group is zero, then appropriate group will
+ *		be searched through all registered connector users, and
+ *		message will be delivered to the group which was created
+ *		for user with the same ID as in @msg.
+ *		If @group is not zero, then message will be delivered
+ *		to the specified group.
+ * @gfp_mask:	GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
 int cn_netlink_send_mult(struct cn_msg *msg, u16 len, u32 portid, u32 group, gfp_t gfp_mask);
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg:	message header(with attached data).
+ * @portid:	destination port.
+ *		If non-zero the message will be sent to the given port,
+ *		which should be set to the original sender.
+ * @group:	destination group.
+ * 		If @portid and @group is zero, then appropriate group will
+ *		be searched through all registered connector users, and
+ *		message will be delivered to the group which was created
+ *		for user with the same ID as in @msg.
+ *		If @group is not zero, then message will be delivered
+ *		to the specified group.
+ * @gfp_mask:	GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
 int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 group, gfp_t gfp_mask);
 
 int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
diff --git a/include/linux/device.h b/include/linux/device.h
index 5eabfa0c4dee..c330b75c6c57 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (c) 2008-2009 Novell Inc.
  *
- * See Documentation/driver-model/ for more information.
+ * See Documentation/driver-api/driver-model/ for more information.
  */
 
 #ifndef _DEVICE_H_
diff --git a/include/linux/hw_random.h b/include/linux/hw_random.h
index c0b93e0ff0c0..8e6dd908da21 100644
--- a/include/linux/hw_random.h
+++ b/include/linux/hw_random.h
@@ -1,7 +1,7 @@
 /*
 	Hardware Random Number Generator
 
-	Please read Documentation/hw_random.txt for details on use.
+	Please read Documentation/admin-guide/hw_random.rst for details on use.
 
 	----------------------------------------------------------
 	This software may be used and distributed according to the terms
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 57baa27f238c..0b0d7259276d 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -5,7 +5,7 @@
  *  Copyright (C) 2006,2007 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
  *
- * see Documentation/locking/lockdep-design.txt for more details.
+ * see Documentation/locking/lockdep-design.rst for more details.
  */
 #ifndef __LINUX_LOCKDEP_H
 #define __LINUX_LOCKDEP_H
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 3093dd162424..dcd03fee6e01 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -151,7 +151,7 @@ static inline bool mutex_is_locked(struct mutex *lock)
 
 /*
  * See kernel/locking/mutex.c for detailed documentation of these APIs.
- * Also see Documentation/locking/mutex-design.txt.
+ * Also see Documentation/locking/mutex-design.rst.
  */
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index beb25f277889..9bc36b589827 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -4,7 +4,7 @@
  *
  * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
  *
- * See Documentation/driver-model/ for more information.
+ * See Documentation/driver-api/driver-model/ for more information.
  */
 
 #ifndef _PLATFORM_DEVICE_H_
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index e401358c4e7e..9d9c663987d8 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -160,7 +160,7 @@ extern void downgrade_write(struct rw_semaphore *sem);
  * static then another method for expressing nested locking is
  * the explicit definition of lock class keys and the use of
  * lockdep_set_class() at lock initialization time.
- * See Documentation/locking/lockdep-design.txt for more details.)
+ * See Documentation/locking/lockdep-design.rst for more details.)
  */
 extern void down_read_nested(struct rw_semaphore *sem, int subclass);
 extern void down_write_nested(struct rw_semaphore *sem, int subclass);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 05b179015d6c..2b78cc734719 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -32,7 +32,7 @@ struct device;
 
 /*
  * This structure describes all the operations that can be done on the
- * physical hardware.  See Documentation/serial/driver.rst for details.
+ * physical hardware.  See Documentation/driver-api/serial/driver.rst for details.
  */
 struct uart_ops {
 	unsigned int	(*tx_empty)(struct uart_port *);
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 6f68438aa4ed..82699845ef79 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -806,7 +806,7 @@ union bpf_attr {
  * 		based on a user-provided identifier for all traffic coming from
  * 		the tasks belonging to the related cgroup. See also the related
  * 		kernel documentation, available from the Linux sources in file
- * 		*Documentation/cgroup-v1/net_cls.rst*.
+ * 		*Documentation/admin-guide/cgroup-v1/net_cls.rst*.
  *
  * 		The Linux kernel has two versions for cgroups: there are
  * 		cgroups v1 and cgroups v2. Both are available to users, who can
diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h
index 64c14cb0022f..b8bb285f6b2a 100644
--- a/include/uapi/rdma/rdma_user_ioctl_cmds.h
+++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h
@@ -36,7 +36,7 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
-/* Documentation/ioctl/ioctl-number.txt */
+/* Documentation/ioctl/ioctl-number.rst */
 #define RDMA_IOCTL_MAGIC	0x1b
 #define RDMA_VERBS_IOCTL \
 	_IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr)
diff --git a/init/Kconfig b/init/Kconfig
index 9697c6b5303c..381cdfee6e0e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -550,7 +550,7 @@ config PSI
 	  have cpu.pressure, memory.pressure, and io.pressure files,
 	  which aggregate pressure stalls for the grouped tasks only.
 
-	  For more details see Documentation/accounting/psi.txt.
+	  For more details see Documentation/accounting/psi.rst.
 
 	  Say N if unsure.
 
@@ -821,7 +821,7 @@ menuconfig CGROUPS
 	  controls or device isolation.
 	  See
 		- Documentation/scheduler/sched-design-CFS.rst	(CFS)
-		- Documentation/cgroup-v1/ (features for grouping, isolation
+		- Documentation/admin-guide/cgroup-v1/ (features for grouping, isolation
 					  and resource control)
 
 	  Say N if unsure.
@@ -883,7 +883,7 @@ config BLK_CGROUP
 	CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
 	CONFIG_BLK_DEV_THROTTLING=y.
 
-	See Documentation/cgroup-v1/blkio-controller.rst for more information.
+	See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information.
 
 config CGROUP_WRITEBACK
 	bool
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index b3b02b9c4405..863e434a6020 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -729,7 +729,7 @@ static inline int nr_cpusets(void)
  * load balancing domains (sched domains) as specified by that partial
  * partition.
  *
- * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.rst
+ * See "What is sched_load_balance" in Documentation/admin-guide/cgroup-v1/cpusets.rst
  * for a background explanation of this.
  *
  * Does not return errors, on the theory that the callers of this
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index 0c601ae072b3..edd1c082dbf5 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -16,7 +16,7 @@
  *    by Steven Rostedt, based on work by Gregory Haskins, Peter Morreale
  *    and Sven Dietrich.
  *
- * Also see Documentation/locking/mutex-design.txt.
+ * Also see Documentation/locking/mutex-design.rst.
  */
 #include <linux/mutex.h>
 #include <linux/ww_mutex.h>
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 38fbf9fa7f1b..fa83d36e30c6 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -9,7 +9,7 @@
  *  Copyright (C) 2005 Kihon Technologies Inc., Steven Rostedt
  *  Copyright (C) 2006 Esben Nielsen
  *
- *  See Documentation/locking/rt-mutex-design.txt for details.
+ *  See Documentation/locking/rt-mutex-design.rst for details.
  */
 #include <linux/spinlock.h>
 #include <linux/export.h>
diff --git a/kernel/panic.c b/kernel/panic.c
index 4d9f55bf7d38..057540b6eee9 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -372,7 +372,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = {
 /**
  * print_tainted - return a string to represent the kernel taint state.
  *
- * For individual taint flag meanings, see Documentation/sysctl/kernel.txt
+ * For individual taint flag meanings, see Documentation/admin-guide/sysctl/kernel.rst
  *
  * The string is overwritten by the next call to print_tainted(),
  * but is always NULL terminated.
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4ac4ca21a30a..a858b55e8ac7 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1139,7 +1139,7 @@ config PROVE_LOCKING
 	 the proof of observed correctness is also maintained for an
 	 arbitrary combination of these separate locking variants.
 
-	 For more details, see Documentation/locking/lockdep-design.txt.
+	 For more details, see Documentation/locking/lockdep-design.rst.
 
 config LOCK_STAT
 	bool "Lock usage statistics"
@@ -1153,7 +1153,7 @@ config LOCK_STAT
 	help
 	 This feature enables tracking lock contention points
 
-	 For more details, see Documentation/locking/lockstat.txt
+	 For more details, see Documentation/locking/lockstat.rst
 
 	 This also enables lock events required by "perf lock",
 	 subcommand of perf.
diff --git a/mm/swap.c b/mm/swap.c
index 607c48229a1d..ae300397dfda 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -8,7 +8,7 @@
 /*
  * This file contains the default values for the operation of the
  * Linux VM subsystem. Fine-tuning documentation can be found in
- * Documentation/sysctl/vm.txt.
+ * Documentation/admin-guide/sysctl/vm.rst.
  * Started 18.12.91
  * Swap aging added 23.2.95, Stephen Tweedie.
  * Buffermem limits added 12.3.98, Rik van Riel.
diff --git a/samples/Kconfig b/samples/Kconfig
index 71b5e833dd9e..c8dacb4dda80 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -99,7 +99,7 @@ config SAMPLE_CONNECTOR
 	  When enabled, this builds both a sample kernel module for
 	  the connector interface and a user space tool to communicate
 	  with it.
-	  See also Documentation/connector/connector.txt
+	  See also Documentation/driver-api/connector.rst
 
 config SAMPLE_HIDRAW
 	bool "hidraw sample"
diff --git a/scripts/coccinelle/free/devm_free.cocci b/scripts/coccinelle/free/devm_free.cocci
index fefd0331a2de..441799b5359b 100644
--- a/scripts/coccinelle/free/devm_free.cocci
+++ b/scripts/coccinelle/free/devm_free.cocci
@@ -3,7 +3,7 @@
 /// functions.  Values allocated using the devm_functions are freed when
 /// the device is detached, and thus the use of the standard freeing
 /// function would cause a double free.
-/// See Documentation/driver-model/devres.rst for more information.
+/// See Documentation/driver-api/driver-model/devres.rst for more information.
 ///
 /// A difficulty of detecting this problem is that the standard freeing
 /// function might be called from a different function than the one
diff --git a/scripts/gcc-plugins/Kconfig b/scripts/gcc-plugins/Kconfig
index e9c677a53c74..d33de0b9f4f5 100644
--- a/scripts/gcc-plugins/Kconfig
+++ b/scripts/gcc-plugins/Kconfig
@@ -23,7 +23,7 @@ config GCC_PLUGINS
 	  GCC plugins are loadable modules that provide extra features to the
 	  compiler. They are useful for runtime instrumentation and static analysis.
 
-	  See Documentation/gcc-plugins.txt for details.
+	  See Documentation/core-api/gcc-plugins.rst for details.
 
 menu "GCC plugins"
 	depends on GCC_PLUGINS
diff --git a/security/Kconfig b/security/Kconfig
index 06a30851511a..0d65594b5196 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -121,7 +121,7 @@ config INTEL_TXT
 	  See <http://www.intel.com/technology/security/> for more information
 	  about Intel(R) TXT.
 	  See <http://tboot.sourceforge.net> for more information about tboot.
-	  See Documentation/intel_txt.txt for a description of how to enable
+	  See Documentation/x86/intel_txt.rst for a description of how to enable
 	  Intel TXT support in a kernel boot.
 
 	  If you are unsure as to whether this is required, answer N.
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index c07196502577..725674f3276d 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent)
  * This is one of the three key functions for hierarchy implementation.
  * This function is responsible for re-evaluating all the cgroup's active
  * exceptions due to a parent's exception change.
- * Refer to Documentation/cgroup-v1/devices.rst for more details.
+ * Refer to Documentation/admin-guide/cgroup-v1/devices.rst for more details.
  */
 static void revalidate_active_exceptions(struct dev_cgroup *devcg)
 {
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index f506c68b2612..17e2b1713702 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -806,7 +806,7 @@ union bpf_attr {
  * 		based on a user-provided identifier for all traffic coming from
  * 		the tasks belonging to the related cgroup. See also the related
  * 		kernel documentation, available from the Linux sources in file
- * 		*Documentation/cgroup-v1/net_cls.rst*.
+ * 		*Documentation/admin-guide/cgroup-v1/net_cls.rst*.
  *
  * 		The Linux kernel has two versions for cgroups: there are
  * 		cgroups v1 and cgroups v2. Both are available to users, who can
diff --git a/tools/testing/selftests/zram/README b/tools/testing/selftests/zram/README
index 7972cc512408..110b34834a6f 100644
--- a/tools/testing/selftests/zram/README
+++ b/tools/testing/selftests/zram/README
@@ -37,4 +37,4 @@ Commands required for testing:
  - mkfs/ mkfs.ext4
 
 For more information please refer:
-kernel-source-tree/Documentation/blockdev/zram.txt
+kernel-source-tree/Documentation/admin-guide/blockdev/zram.rst
diff --git a/usr/Kconfig b/usr/Kconfig
index 43658b8a975e..a6b68503d177 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -18,7 +18,7 @@ config INITRAMFS_SOURCE
 	  When multiple directories and files are specified then the
 	  initramfs image will be the aggregate of all of them.
 
-	  See <file:Documentation/early-userspace/README> for more details.
+	  See <file:Documentation/driver-api/early-userspace/early_userspace_support.rst> for more details.
 
 	  If you are not sure, leave it blank.