ata: pata_pdc2027x: Replace PDPRINTK() with standard ata logging

Use standard ata logging macros instead of the hand-crafted
PDPRINTK and remove duplicate logging messages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

1 files changed, 28 insertions, 43 deletions

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index effc1a09444d..4fbb3eed8b0b 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -30,13 +30,6 @@
 
 #define DRV_NAME	"pata_pdc2027x"
 #define DRV_VERSION	"1.0"
-#undef PDC_DEBUG
-
-#ifdef PDC_DEBUG
-#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
-#else
-#define PDPRINTK(fmt, args...)
-#endif
 
 enum {
 	PDC_MMIO_BAR		= 5,
@@ -214,11 +207,11 @@ static int pdc2027x_cable_detect(struct ata_port *ap)
 	if (cgcr & (1 << 26))
 		goto cbl40;
 
-	PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
+	ata_port_dbg(ap, "No cable or 80-conductor cable\n");
 
 	return ATA_CBL_PATA80;
 cbl40:
-	printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
+	ata_port_info(ap, DRV_NAME ":40-conductor cable detected\n");
 	return ATA_CBL_PATA40;
 }
 
@@ -292,17 +285,17 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	unsigned int pio = adev->pio_mode - XFER_PIO_0;
 	u32 ctcr0, ctcr1;
 
-	PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode);
+	ata_port_dbg(ap, "adev->pio_mode[%X]\n", adev->pio_mode);
 
 	/* Sanity check */
 	if (pio > 4) {
-		printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio);
+		ata_port_err(ap, "Unknown pio mode [%d] ignored\n", pio);
 		return;
 
 	}
 
 	/* Set the PIO timing registers using value table for 133MHz */
-	PDPRINTK("Set pio regs... \n");
+	ata_port_dbg(ap, "Set pio regs... \n");
 
 	ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 	ctcr0 &= 0xffff0000;
@@ -315,9 +308,7 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
 	iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 
-	PDPRINTK("Set pio regs done\n");
-
-	PDPRINTK("Set to pio mode[%u] \n", pio);
+	ata_port_dbg(ap, "Set to pio mode[%u] \n", pio);
 }
 
 /**
@@ -350,7 +341,7 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 			iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
 		}
 
-		PDPRINTK("Set udma regs... \n");
+		ata_port_dbg(ap, "Set udma regs... \n");
 
 		ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 		ctcr1 &= 0xff000000;
@@ -359,16 +350,14 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 			(pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
 		iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 
-		PDPRINTK("Set udma regs done\n");
-
-		PDPRINTK("Set to udma mode[%u] \n", udma_mode);
+		ata_port_dbg(ap, "Set to udma mode[%u] \n", udma_mode);
 
 	} else  if ((dma_mode >= XFER_MW_DMA_0) &&
 		   (dma_mode <= XFER_MW_DMA_2)) {
 		/* Set the MDMA timing registers with value table for 133MHz */
 		unsigned int mdma_mode = dma_mode & 0x07;
 
-		PDPRINTK("Set mdma regs... \n");
+		ata_port_dbg(ap, "Set mdma regs... \n");
 		ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 
 		ctcr0 &= 0x0000ffff;
@@ -376,11 +365,10 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 			(pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
 
 		iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
-		PDPRINTK("Set mdma regs done\n");
 
-		PDPRINTK("Set to mdma mode[%u] \n", mdma_mode);
+		ata_port_dbg(ap, "Set to mdma mode[%u] \n", mdma_mode);
 	} else {
-		printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode);
+		ata_port_err(ap, "Unknown dma mode [%u] ignored\n", dma_mode);
 	}
 }
 
@@ -414,7 +402,7 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed
 			ctcr1 |= (1 << 25);
 			iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
 
-			PDPRINTK("Turn on prefetch\n");
+			ata_dev_dbg(dev, "Turn on prefetch\n");
 		} else {
 			pdc2027x_set_dmamode(ap, dev);
 		}
@@ -485,8 +473,8 @@ retry:
 
 	counter = (bccrh << 15) | bccrl;
 
-	PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh,  bccrl);
-	PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
+	dev_dbg(host->dev, "bccrh [%X] bccrl [%X]\n", bccrh,  bccrl);
+	dev_dbg(host->dev, "bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
 
 	/*
 	 * The 30-bit decreasing counter are read by 2 pieces.
@@ -495,7 +483,7 @@ retry:
 	 */
 	if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) {
 		retry--;
-		PDPRINTK("rereading counter\n");
+		dev_dbg(host->dev, "rereading counter\n");
 		goto retry;
 	}
 
@@ -520,20 +508,19 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
 
 	/* Sanity check */
 	if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) {
-		printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz);
+		dev_err(host->dev, "Invalid PLL input clock %ldkHz, give up!\n",
+			pll_clock_khz);
 		return;
 	}
 
-#ifdef PDC_DEBUG
-	PDPRINTK("pout_required is %ld\n", pout_required);
+	dev_dbg(host->dev, "pout_required is %ld\n", pout_required);
 
 	/* Show the current clock value of PLL control register
 	 * (maybe already configured by the firmware)
 	 */
 	pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 
-	PDPRINTK("pll_ctl[%X]\n", pll_ctl);
-#endif
+	dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl);
 
 	/*
 	 * Calculate the ratio of F, R and OD
@@ -552,7 +539,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
 		R = 0x00;
 	} else {
 		/* Invalid ratio */
-		printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio);
+		dev_err(host->dev, "Invalid ratio %ld, give up!\n", ratio);
 		return;
 	}
 
@@ -560,15 +547,15 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
 
 	if (unlikely(F < 0 || F > 127)) {
 		/* Invalid F */
-		printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F);
+		dev_err(host->dev, "F[%d] invalid!\n", F);
 		return;
 	}
 
-	PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio);
+	dev_dbg(host->dev, "F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio);
 
 	pll_ctl = (R << 8) | F;
 
-	PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
+	dev_dbg(host->dev, "Writing pll_ctl[%X]\n", pll_ctl);
 
 	iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
 	ioread16(mmio_base + PDC_PLL_CTL); /* flush */
@@ -576,15 +563,13 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
 	/* Wait the PLL circuit to be stable */
 	msleep(30);
 
-#ifdef PDC_DEBUG
 	/*
 	 *  Show the current clock value of PLL control register
 	 * (maybe configured by the firmware)
 	 */
 	pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 
-	PDPRINTK("pll_ctl[%X]\n", pll_ctl);
-#endif
+	dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl);
 
 	return;
 }
@@ -605,7 +590,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
 
 	/* Start the test mode */
 	scr = ioread32(mmio_base + PDC_SYS_CTL);
-	PDPRINTK("scr[%X]\n", scr);
+	dev_dbg(host->dev, "scr[%X]\n", scr);
 	iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
 	ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 
@@ -622,7 +607,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
 
 	/* Stop the test mode */
 	scr = ioread32(mmio_base + PDC_SYS_CTL);
-	PDPRINTK("scr[%X]\n", scr);
+	dev_dbg(host->dev, "scr[%X]\n", scr);
 	iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
 	ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 
@@ -632,8 +617,8 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
 	pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
 		(100000000 / usec_elapsed);
 
-	PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
-	PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
+	dev_dbg(host->dev, "start[%ld] end[%ld] PLL input clock[%ld]HZ\n",
+		     start_count, end_count, pll_clock);
 
 	return pll_clock;
 }