diff options
| author | Heiner Kallweit <hkallweit1@gmail.com> | 2022-08-24 22:34:49 +0200 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2022-08-25 12:40:56 -0700 |
| commit | a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 (patch) | |
| tree | f92475b272f3a60d9a8a4f36cfe855035af6f804 | |
| parent | ef332fe14b25f1599ef4c7cb61f3b5fb2192b546 (diff) | |
net: stmmac: work around sporadic tx issue on link-up
This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.
[0] https://www.spinics.net/lists/netdev/msg831526.html
Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 |
2 files changed, 11 insertions, 6 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index caa4bfc4c1d6..9b6138b11776 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -258,14 +258,18 @@ EXPORT_SYMBOL_GPL(stmmac_set_mac_addr); /* Enable disable MAC RX/TX */ void stmmac_set_mac(void __iomem *ioaddr, bool enable) { - u32 value = readl(ioaddr + MAC_CTRL_REG); + u32 old_val, value; + + old_val = readl(ioaddr + MAC_CTRL_REG); + value = old_val; if (enable) value |= MAC_ENABLE_RX | MAC_ENABLE_TX; else value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); - writel(value, ioaddr + MAC_CTRL_REG); + if (value != old_val) + writel(value, ioaddr + MAC_CTRL_REG); } void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 070b5ef165eb..592d29abcb1c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -986,10 +986,10 @@ static void stmmac_mac_link_up(struct phylink_config *config, bool tx_pause, bool rx_pause) { struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); - u32 ctrl; + u32 old_ctrl, ctrl; - ctrl = readl(priv->ioaddr + MAC_CTRL_REG); - ctrl &= ~priv->hw->link.speed_mask; + old_ctrl = readl(priv->ioaddr + MAC_CTRL_REG); + ctrl = old_ctrl & ~priv->hw->link.speed_mask; if (interface == PHY_INTERFACE_MODE_USXGMII) { switch (speed) { @@ -1064,7 +1064,8 @@ static void stmmac_mac_link_up(struct phylink_config *config, if (tx_pause && rx_pause) stmmac_mac_flow_ctrl(priv, duplex); - writel(ctrl, priv->ioaddr + MAC_CTRL_REG); + if (ctrl != old_ctrl) + writel(ctrl, priv->ioaddr + MAC_CTRL_REG); stmmac_mac_set(priv, priv->ioaddr, true); if (phy && priv->dma_cap.eee) { |