Merge branch 'x86/asm' into x86/core, to prepare for new patch

Collect all changes to arch/x86/entry/entry_64.S, before applying
patch that changes most of the file.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

82 files changed, 2120 insertions, 2818 deletions

diff --git a/Documentation/x86/entry_64.txt b/Documentation/x86/entry_64.txt
index 9132b86176a3..33884d156125 100644
--- a/Documentation/x86/entry_64.txt
+++ b/Documentation/x86/entry_64.txt
@@ -18,10 +18,10 @@ Some of these entries are:
 
  - system_call: syscall instruction from 64-bit code.
 
- - ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
+ - entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
    either way.
 
- - ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
+ - entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
    code
 
  - interrupt: An array of entries.  Every IDT vector that doesn't
diff --git a/MAINTAINERS b/MAINTAINERS
index e30871880fdb..2987968e235c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10893,7 +10893,7 @@ M:	Andy Lutomirski <luto@amacapital.net>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 S:	Maintained
-F:	arch/x86/vdso/
+F:	arch/x86/entry/vdso/
 
 XC2028/3028 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 3942f74c92d7..1538562cc720 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -1,3 +1,6 @@
+
+obj-y += entry/
+
 obj-$(CONFIG_KVM) += kvm/
 
 # Xen paravirtualization support
@@ -11,7 +14,7 @@ obj-y += kernel/
 obj-y += mm/
 
 obj-y += crypto/
-obj-y += vdso/
+
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 57996ee840dd..118e6debc483 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -149,12 +149,6 @@ endif
 sp-$(CONFIG_X86_32) := esp
 sp-$(CONFIG_X86_64) := rsp
 
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
 # does binutils support specific instructions?
 asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
 asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
@@ -162,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
 avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
 avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
 
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
@@ -187,7 +181,7 @@ archscripts: scripts_basic
 # Syscall table generation
 
 archheaders:
-	$(Q)$(MAKE) $(build)=arch/x86/syscalls all
+	$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
 
 archprepare:
 ifeq ($(CONFIG_KEXEC_FILE),y)
@@ -250,7 +244,7 @@ install:
 
 PHONY += vdso_install
 vdso_install:
-	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
+	$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
 
 archclean:
 	$(Q)rm -rf $(objtree)/arch/i386
diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile
new file mode 100644
index 000000000000..7a144971db79
--- /dev/null
+++ b/arch/x86/entry/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the x86 low level entry code
+#
+obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
+
+obj-y				+= vdso/
+obj-y				+= vsyscall/
+
+obj-$(CONFIG_IA32_EMULATION)	+= entry_64_compat.o syscall_32.o
+
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/entry/calling.h
index 1c8b50edb2db..f4e6308c4200 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/entry/calling.h
@@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with
 
 */
 
-#include <asm/dwarf2.h>
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -91,28 +89,27 @@ For 32-bit we have the following conventions - kernel is built with
 #define SIZEOF_PTREGS	21*8
 
 	.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
-	subq	$15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET 15*8+\addskip
+	addq	$-(15*8+\addskip), %rsp
 	.endm
 
 	.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
 	.if \r11
-	movq_cfi r11, 6*8+\offset
+	movq %r11, 6*8+\offset(%rsp)
 	.endif
 	.if \r8910
-	movq_cfi r10, 7*8+\offset
-	movq_cfi r9,  8*8+\offset
-	movq_cfi r8,  9*8+\offset
+	movq %r10, 7*8+\offset(%rsp)
+	movq %r9,  8*8+\offset(%rsp)
+	movq %r8,  9*8+\offset(%rsp)
 	.endif
 	.if \rax
-	movq_cfi rax, 10*8+\offset
+	movq %rax, 10*8+\offset(%rsp)
 	.endif
 	.if \rcx
-	movq_cfi rcx, 11*8+\offset
+	movq %rcx, 11*8+\offset(%rsp)
 	.endif
-	movq_cfi rdx, 12*8+\offset
-	movq_cfi rsi, 13*8+\offset
-	movq_cfi rdi, 14*8+\offset
+	movq %rdx, 12*8+\offset(%rsp)
+	movq %rsi, 13*8+\offset(%rsp)
+	movq %rdi, 14*8+\offset(%rsp)
 	.endm
 	.macro SAVE_C_REGS offset=0
 	SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
@@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro SAVE_EXTRA_REGS offset=0
-	movq_cfi r15, 0*8+\offset
-	movq_cfi r14, 1*8+\offset
-	movq_cfi r13, 2*8+\offset
-	movq_cfi r12, 3*8+\offset
-	movq_cfi rbp, 4*8+\offset
-	movq_cfi rbx, 5*8+\offset
+	movq %r15, 0*8+\offset(%rsp)
+	movq %r14, 1*8+\offset(%rsp)
+	movq %r13, 2*8+\offset(%rsp)
+	movq %r12, 3*8+\offset(%rsp)
+	movq %rbp, 4*8+\offset(%rsp)
+	movq %rbx, 5*8+\offset(%rsp)
 	.endm
 	.macro SAVE_EXTRA_REGS_RBP offset=0
-	movq_cfi rbp, 4*8+\offset
+	movq %rbp, 4*8+\offset(%rsp)
 	.endm
 
 	.macro RESTORE_EXTRA_REGS offset=0
-	movq_cfi_restore 0*8+\offset, r15
-	movq_cfi_restore 1*8+\offset, r14
-	movq_cfi_restore 2*8+\offset, r13
-	movq_cfi_restore 3*8+\offset, r12
-	movq_cfi_restore 4*8+\offset, rbp
-	movq_cfi_restore 5*8+\offset, rbx
+	movq 0*8+\offset(%rsp), %r15
+	movq 1*8+\offset(%rsp), %r14
+	movq 2*8+\offset(%rsp), %r13
+	movq 3*8+\offset(%rsp), %r12
+	movq 4*8+\offset(%rsp), %rbp
+	movq 5*8+\offset(%rsp), %rbx
 	.endm
 
 	.macro ZERO_EXTRA_REGS
@@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with
 
 	.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
 	.if \rstor_r11
-	movq_cfi_restore 6*8, r11
+	movq 6*8(%rsp), %r11
 	.endif
 	.if \rstor_r8910
-	movq_cfi_restore 7*8, r10
-	movq_cfi_restore 8*8, r9
-	movq_cfi_restore 9*8, r8
+	movq 7*8(%rsp), %r10
+	movq 8*8(%rsp), %r9
+	movq 9*8(%rsp), %r8
 	.endif
 	.if \rstor_rax
-	movq_cfi_restore 10*8, rax
+	movq 10*8(%rsp), %rax
 	.endif
 	.if \rstor_rcx
-	movq_cfi_restore 11*8, rcx
+	movq 11*8(%rsp), %rcx
 	.endif
 	.if \rstor_rdx
-	movq_cfi_restore 12*8, rdx
+	movq 12*8(%rsp), %rdx
 	.endif
-	movq_cfi_restore 13*8, rsi
-	movq_cfi_restore 14*8, rdi
+	movq 13*8(%rsp), %rsi
+	movq 14*8(%rsp), %rdi
 	.endm
 	.macro RESTORE_C_REGS
 	RESTORE_C_REGS_HELPER 1,1,1,1,1
@@ -204,8 +201,7 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
-	addq $15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
+	subq $-(15*8+\addskip), %rsp
 	.endm
 
 	.macro icebp
@@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with
  */
 
 	.macro SAVE_ALL
-	pushl_cfi_reg eax
-	pushl_cfi_reg ebp
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg edx
-	pushl_cfi_reg ecx
-	pushl_cfi_reg ebx
+	pushl %eax
+	pushl %ebp
+	pushl %edi
+	pushl %esi
+	pushl %edx
+	pushl %ecx
+	pushl %ebx
 	.endm
 
 	.macro RESTORE_ALL
-	popl_cfi_reg ebx
-	popl_cfi_reg ecx
-	popl_cfi_reg edx
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi_reg ebp
-	popl_cfi_reg eax
+	popl %ebx
+	popl %ecx
+	popl %edx
+	popl %esi
+	popl %edi
+	popl %ebp
+	popl %eax
 	.endm
 
 #endif /* CONFIG_X86_64 */
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
new file mode 100644
index 000000000000..edd7aadfacfa
--- /dev/null
+++ b/arch/x86/entry/entry_32.S
@@ -0,0 +1,1248 @@
+/*
+ *  Copyright (C) 1991,1992  Linus Torvalds
+ *
+ * entry_32.S contains the system-call and low-level fault and trap handling routines.
+ *
+ * Stack layout in 'syscall_exit':
+ *	ptrace needs to have all registers on the stack.
+ *	If the order here is changed, it needs to be
+ *	updated in fork.c:copy_process(), signal.c:do_signal(),
+ *	ptrace.c and ptrace.h
+ *
+ *	 0(%esp) - %ebx
+ *	 4(%esp) - %ecx
+ *	 8(%esp) - %edx
+ *       C(%esp) - %esi
+ *	10(%esp) - %edi
+ *	14(%esp) - %ebp
+ *	18(%esp) - %eax
+ *	1C(%esp) - %ds
+ *	20(%esp) - %es
+ *	24(%esp) - %fs
+ *	28(%esp) - %gs		saved iff !CONFIG_X86_32_LAZY_GS
+ *	2C(%esp) - orig_eax
+ *	30(%esp) - %eip
+ *	34(%esp) - %cs
+ *	38(%esp) - %eflags
+ *	3C(%esp) - %oldesp
+ *	40(%esp) - %oldss
+ */
+
+#include <linux/linkage.h>
+#include <linux/err.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page_types.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/ftrace.h>
+#include <asm/irq_vectors.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE		0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+# define sysenter_audit		syscall_trace_entry
+# define sysexit_audit		syscall_exit_work
+#endif
+
+	.section .entry.text, "ax"
+
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization.  The following will never clobber any registers:
+ *   INTERRUPT_RETURN (aka. "iret")
+ *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
+
+#ifdef CONFIG_PREEMPT
+# define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+#else
+# define preempt_stop(clobbers)
+# define resume_kernel		restore_all
+#endif
+
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)     # interrupts off?
+	jz	1f
+	TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+/*
+ * User gs save/restore
+ *
+ * %gs is used for userland TLS and kernel only uses it for stack
+ * canary which is required to be at %gs:20 by gcc.  Read the comment
+ * at the top of stackprotector.h for more info.
+ *
+ * Local labels 98 and 99 are used.
+ */
+#ifdef CONFIG_X86_32_LAZY_GS
+
+ /* unfortunately push/pop can't be no-op */
+.macro PUSH_GS
+	pushl	$0
+.endm
+.macro POP_GS pop=0
+	addl	$(4 + \pop), %esp
+.endm
+.macro POP_GS_EX
+.endm
+
+ /* all the rest are no-op */
+.macro PTGS_TO_GS
+.endm
+.macro PTGS_TO_GS_EX
+.endm
+.macro GS_TO_REG reg
+.endm
+.macro REG_TO_PTGS reg
+.endm
+.macro SET_KERNEL_GS reg
+.endm
+
+#else	/* CONFIG_X86_32_LAZY_GS */
+
+.macro PUSH_GS
+	pushl	%gs
+.endm
+
+.macro POP_GS pop=0
+98:	popl	%gs
+  .if \pop <> 0
+	add $\pop, %esp
+  .endif
+.endm
+.macro POP_GS_EX
+.pushsection .fixup, "ax"
+99:	movl	$0, (%esp)
+	jmp	98b
+.popsection
+	_ASM_EXTABLE(98b, 99b)
+.endm
+
+.macro PTGS_TO_GS
+98:	mov	PT_GS(%esp), %gs
+.endm
+.macro PTGS_TO_GS_EX
+.pushsection .fixup, "ax"
+99:	movl	$0, PT_GS(%esp)
+	jmp	98b
+.popsection
+	_ASM_EXTABLE(98b, 99b)
+.endm
+
+.macro GS_TO_REG reg
+	movl	%gs, \reg
+.endm
+.macro REG_TO_PTGS reg
+	movl	\reg, PT_GS(%esp)
+.endm
+.macro SET_KERNEL_GS reg
+	movl	$(__KERNEL_STACK_CANARY), \reg
+	movl	\reg, %gs
+.endm
+
+#endif /* CONFIG_X86_32_LAZY_GS */
+
+.macro SAVE_ALL
+	cld
+	PUSH_GS
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+	movl	$(__USER_DS), %edx
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	$(__KERNEL_PERCPU), %edx
+	movl	%edx, %fs
+	SET_KERNEL_GS %edx
+.endm
+
+.macro RESTORE_INT_REGS
+	popl	%ebx
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	popl	%edi
+	popl	%ebp
+	popl	%eax
+.endm
+
+.macro RESTORE_REGS pop=0
+	RESTORE_INT_REGS
+1:	popl	%ds
+2:	popl	%es
+3:	popl	%fs
+	POP_GS \pop
+.pushsection .fixup, "ax"
+4:	movl	$0, (%esp)
+	jmp	1b
+5:	movl	$0, (%esp)
+	jmp	2b
+6:	movl	$0, (%esp)
+	jmp	3b
+.popsection
+	_ASM_EXTABLE(1b, 4b)
+	_ASM_EXTABLE(2b, 5b)
+	_ASM_EXTABLE(3b, 6b)
+	POP_GS_EX
+.endm
+
+ENTRY(ret_from_fork)
+	pushl	%eax
+	call	schedule_tail
+	GET_THREAD_INFO(%ebp)
+	popl	%eax
+	pushl	$0x0202				# Reset kernel eflags
+	popfl
+	jmp	syscall_exit
+END(ret_from_fork)
+
+ENTRY(ret_from_kernel_thread)
+	pushl	%eax
+	call	schedule_tail
+	GET_THREAD_INFO(%ebp)
+	popl	%eax
+	pushl	$0x0202				# Reset kernel eflags
+	popfl
+	movl	PT_EBP(%esp), %eax
+	call	*PT_EBX(%esp)
+	movl	$0, PT_EAX(%esp)
+	jmp	syscall_exit
+ENDPROC(ret_from_kernel_thread)
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+	# userspace resumption stub bypassing syscall exit tracing
+	ALIGN
+ret_from_exception:
+	preempt_stop(CLBR_ANY)
+ret_from_intr:
+	GET_THREAD_INFO(%ebp)
+#ifdef CONFIG_VM86
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS and CS
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+#else
+	/*
+	 * We can be coming here from child spawned by kernel_thread().
+	 */
+	movl	PT_CS(%esp), %eax
+	andl	$SEGMENT_RPL_MASK, %eax
+#endif
+	cmpl	$USER_RPL, %eax
+	jb	resume_kernel			# not returning to v8086 or userspace
+
+ENTRY(resume_userspace)
+	LOCKDEP_SYS_EXIT
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
+	TRACE_IRQS_OFF
+	movl	TI_flags(%ebp), %ecx
+	andl	$_TIF_WORK_MASK, %ecx		# is there any work to be done on
+						# int/exception return?
+	jne	work_pending
+	jmp	restore_all
+END(ret_from_exception)
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+	DISABLE_INTERRUPTS(CLBR_ANY)
+need_resched:
+	cmpl	$0, PER_CPU_VAR(__preempt_count)
+	jnz	restore_all
+	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)	# interrupts off (exception path) ?
+	jz	restore_all
+	call	preempt_schedule_irq
+	jmp	need_resched
+END(resume_kernel)
+#endif
+
+/*
+ * SYSENTER_RETURN points to after the SYSENTER instruction
+ * in the vsyscall page.  See vsyscall-sysentry.S, which defines
+ * the symbol.
+ */
+
+	# SYSENTER  call handler stub
+ENTRY(entry_SYSENTER_32)
+	movl	TSS_sysenter_sp0(%esp), %esp
+sysenter_past_esp:
+	/*
+	 * Interrupts are disabled here, but we can't trace it until
+	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
+	 * we immediately enable interrupts at that point anyway.
+	 */
+	pushl	$__USER_DS
+	pushl	%ebp
+	pushfl
+	orl	$X86_EFLAGS_IF, (%esp)
+	pushl	$__USER_CS
+	/*
+	 * Push current_thread_info()->sysenter_return to the stack.
+	 * A tiny bit of offset fixup is necessary: TI_sysenter_return
+	 * is relative to thread_info, which is at the bottom of the
+	 * kernel stack page.  4*4 means the 4 words pushed above;
+	 * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
+	 * and THREAD_SIZE takes us to the bottom.
+	 */
+	pushl	((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
+
+	pushl	%eax
+	SAVE_ALL
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+	cmpl	$__PAGE_OFFSET-3, %ebp
+	jae	syscall_fault
+	ASM_STAC
+1:	movl	(%ebp), %ebp
+	ASM_CLAC
+	movl	%ebp, PT_EBP(%esp)
+	_ASM_EXTABLE(1b, syscall_fault)
+
+	GET_THREAD_INFO(%ebp)
+
+	testl	$_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+	jnz	sysenter_audit
+sysenter_do_call:
+	cmpl	$(NR_syscalls), %eax
+	jae	sysenter_badsys
+	call	*sys_call_table(, %eax, 4)
+sysenter_after_call:
+	movl	%eax, PT_EAX(%esp)
+	LOCKDEP_SYS_EXIT
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl	TI_flags(%ebp), %ecx
+	testl	$_TIF_ALLWORK_MASK, %ecx
+	jnz	sysexit_audit
+sysenter_exit:
+/* if something modifies registers it must also disable sysexit */
+	movl	PT_EIP(%esp), %edx
+	movl	PT_OLDESP(%esp), %ecx
+	xorl	%ebp, %ebp
+	TRACE_IRQS_ON
+1:	mov	PT_FS(%esp), %fs
+	PTGS_TO_GS
+	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), TI_flags(%ebp)
+	jnz	syscall_trace_entry
+	/* movl	PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+	movl	PT_EBX(%esp), %edx		/* ebx/a0: 2nd arg to audit */
+	/* movl	PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+	pushl	PT_ESI(%esp)			/* a3: 5th arg */
+	pushl	PT_EDX+4(%esp)			/* a2: 4th arg */
+	call	__audit_syscall_entry
+	popl	%ecx				/* get that remapped edx off the stack */
+	popl	%ecx				/* get that remapped esi off the stack */
+	movl	PT_EAX(%esp), %eax		/* reload syscall number */
+	jmp	sysenter_do_call
+
+sysexit_audit:
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+	jnz	syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl	%eax, %edx			/* second arg, syscall return value */
+	cmpl	$-MAX_ERRNO, %eax		/* is it an error ? */
+	setbe %al				/* 1 if so, 0 if not */
+	movzbl %al, %eax			/* zero-extend that */
+	call	__audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl	TI_flags(%ebp), %ecx
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
+	jnz	syscall_exit_work
+	movl	PT_EAX(%esp), %eax		/* reload syscall return value */
+	jmp	sysenter_exit
+#endif
+
+.pushsection .fixup, "ax"
+2:	movl	$0, PT_FS(%esp)
+	jmp	1b
+.popsection
+	_ASM_EXTABLE(1b, 2b)
+	PTGS_TO_GS_EX
+ENDPROC(entry_SYSENTER_32)
+
+	# system call handler stub
+ENTRY(entry_INT80_32)
+	ASM_CLAC
+	pushl	%eax				# save orig_eax
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+						# system call tracing in operation / emulation
+	testl	$_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
+	jnz	syscall_trace_entry
+	cmpl	$(NR_syscalls), %eax
+	jae	syscall_badsys
+syscall_call:
+	call	*sys_call_table(, %eax, 4)
+syscall_after_call:
+	movl	%eax, PT_EAX(%esp)		# store the return value
+syscall_exit:
+	LOCKDEP_SYS_EXIT
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
+	TRACE_IRQS_OFF
+	movl	TI_flags(%ebp), %ecx
+	testl	$_TIF_ALLWORK_MASK, %ecx	# current->work
+	jnz	syscall_exit_work
+
+restore_all:
+	TRACE_IRQS_IRET
+restore_all_notrace:
+#ifdef CONFIG_X86_ESPFIX32
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
+	/*
+	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+	 * are returning to the kernel.
+	 * See comments in process.c:copy_thread() for details.
+	 */
+	movb	PT_OLDSS(%esp), %ah
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	cmpl	$((SEGMENT_LDT << 8) | USER_RPL), %eax
+	je ldt_ss				# returning to user-space with LDT SS
+#endif
+restore_nocheck:
+	RESTORE_REGS 4				# skip orig_eax/error_code
+irq_return:
+	INTERRUPT_RETURN
+.section .fixup, "ax"
+ENTRY(iret_exc	)
+	pushl	$0				# no error code
+	pushl	$do_iret_error
+	jmp	error_code
+.previous
+	_ASM_EXTABLE(irq_return, iret_exc)
+
+#ifdef CONFIG_X86_ESPFIX32
+ldt_ss:
+#ifdef CONFIG_PARAVIRT
+	/*
+	 * The kernel can't run on a non-flat stack if paravirt mode
+	 * is active.  Rather than try to fixup the high bits of
+	 * ESP, bypass this code entirely.  This may break DOSemu
+	 * and/or Wine support in a paravirt VM, although the option
+	 * is still available to implement the setting of the high
+	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
+	 */
+	cmpl	$0, pv_info+PARAVIRT_enabled
+	jne	restore_nocheck
+#endif
+
+/*
+ * Setup and switch to ESPFIX stack
+ *
+ * We're returning to userspace with a 16 bit stack. The CPU will not
+ * restore the high word of ESP for us on executing iret... This is an
+ * "official" bug of all the x86-compatible CPUs, which we can work
+ * around to make dosemu and wine happy. We do this by preloading the
+ * high word of ESP with the high word of the userspace ESP while
+ * compensating for the offset by changing to the ESPFIX segment with
+ * a base address that matches for the difference.
+ */
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+	mov	%esp, %edx			/* load kernel esp */
+	mov	PT_OLDESP(%esp), %eax		/* load userspace esp */
+	mov	%dx, %ax			/* eax: new kernel esp */
+	sub %eax, %edx				/* offset (low word is 0) */
+	shr $16, %edx
+	mov	%dl, GDT_ESPFIX_SS + 4		/* bits 16..23 */
+	mov	%dh, GDT_ESPFIX_SS + 7		/* bits 24..31 */
+	pushl	$__ESPFIX_SS
+	pushl	%eax				/* new kernel esp */
+	/*
+	 * Disable interrupts, but do not irqtrace this section: we
+	 * will soon execute iret and the tracer was already set to
+	 * the irqstate after the IRET:
+	 */
+	DISABLE_INTERRUPTS(CLBR_EAX)
+	lss	(%esp), %esp			/* switch to espfix segment */
+	jmp	restore_nocheck
+#endif
+ENDPROC(entry_INT80_32)
+
+	# perform work that needs to be done immediately before resumption
+	ALIGN
+work_pending:
+	testb $_TIF_NEED_RESCHED, %cl
+	jz	work_notifysig
+work_resched:
+	call	schedule
+	LOCKDEP_SYS_EXIT
+	DISABLE_INTERRUPTS(CLBR_ANY)		# make sure we don't miss an interrupt
+						# setting need_resched or sigpending
+						# between sampling and the iret
+	TRACE_IRQS_OFF
+	movl	TI_flags(%ebp), %ecx
+	andl	$_TIF_WORK_MASK, %ecx		# is there any work to be done other
+						# than syscall tracing?
+	jz	restore_all
+	testb $_TIF_NEED_RESCHED, %cl
+	jnz	work_resched
+
+work_notifysig:					# deal with pending signals and
+						# notify-resume requests
+#ifdef CONFIG_VM86
+	testl	$X86_EFLAGS_VM, PT_EFLAGS(%esp)
+	movl	%esp, %eax
+	jnz	work_notifysig_v86		# returning to kernel-space or
+						# vm86-space
+1:
+#else
+	movl	%esp, %eax
+#endif
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	movb	PT_CS(%esp), %bl
+	andb $SEGMENT_RPL_MASK, %bl
+	cmpb $USER_RPL, %bl
+	jb	resume_kernel
+	xorl	%edx, %edx
+	call	do_notify_resume
+	jmp	resume_userspace
+
+#ifdef CONFIG_VM86
+	ALIGN
+work_notifysig_v86:
+	pushl	%ecx				# save ti_flags for do_notify_resume
+	call	save_v86_state			# %eax contains pt_regs pointer
+	popl	%ecx
+	movl	%eax, %esp
+	jmp	1b
+#endif
+END(work_pending)
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_trace_entry:
+	movl	$-ENOSYS, PT_EAX(%esp)
+	movl	%esp, %eax
+	call	syscall_trace_enter
+	/* What it returned is what we'll actually use.  */
+	cmpl	$(NR_syscalls), %eax
+	jnae	syscall_call
+	jmp	syscall_exit
+END(syscall_trace_entry)
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_exit_work:
+	testl	$_TIF_WORK_SYSCALL_EXIT, %ecx
+	jz	work_pending
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)		# could let syscall_trace_leave() call
+						# schedule() instead
+	movl	%esp, %eax
+	call	syscall_trace_leave
+	jmp	resume_userspace
+END(syscall_exit_work)
+
+syscall_fault:
+	ASM_CLAC
+	GET_THREAD_INFO(%ebp)
+	movl	$-EFAULT, PT_EAX(%esp)
+	jmp	resume_userspace
+END(syscall_fault)
+
+syscall_badsys:
+	movl	$-ENOSYS, %eax
+	jmp	syscall_after_call
+END(syscall_badsys)
+
+sysenter_badsys:
+	movl	$-ENOSYS, %eax
+	jmp	sysenter_after_call
+END(sysenter_badsys)
+
+.macro FIXUP_ESPFIX_STACK
+/*
+ * Switch back for ESPFIX stack to the normal zerobased stack
+ *
+ * We can't call C functions using the ESPFIX stack. This code reads
+ * the high word of the segment base from the GDT and swiches to the
+ * normal stack and adjusts ESP with the matching offset.
+ */
+#ifdef CONFIG_X86_ESPFIX32
+	/* fixup the stack */
+	mov	GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
+	mov	GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
+	shl $16, %eax
+	addl	%esp, %eax			/* the adjusted stack pointer */
+	pushl	$__KERNEL_DS
+	pushl	%eax
+	lss	(%esp), %esp			/* switch to the normal stack segment */
+#endif
+.endm
+.macro UNWIND_ESPFIX_STACK
+#ifdef CONFIG_X86_ESPFIX32
+	movl	%ss, %eax
+	/* see if on espfix stack */
+	cmpw	$__ESPFIX_SS, %ax
+	jne	27f
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	/* switch to normal stack */
+	FIXUP_ESPFIX_STACK
+27:
+#endif
+.endm
+
+/*
+ * Build the entry stubs with some assembler magic.
+ * We pack 1 stub into every 8-byte block.
+ */
+	.align 8
+ENTRY(irq_entries_start)
+    vector=FIRST_EXTERNAL_VECTOR
+    .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
+	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
+    vector=vector+1
+	jmp	common_interrupt
+	.align	8
+    .endr
+END(irq_entries_start)
+
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
+	ASM_CLAC
+	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	movl	%esp, %eax
+	call	do_IRQ
+	jmp	ret_from_intr
+ENDPROC(common_interrupt)
+
+#define BUILD_INTERRUPT3(name, nr, fn)	\
+ENTRY(name)				\
+	ASM_CLAC;			\
+	pushl	$~(nr);			\
+	SAVE_ALL;			\
+	TRACE_IRQS_OFF			\
+	movl	%esp, %eax;		\
+	call	fn;			\
+	jmp	ret_from_intr;		\
+ENDPROC(name)
+
+
+#ifdef CONFIG_TRACING
+# define TRACE_BUILD_INTERRUPT(name, nr)	BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
+#else
+# define TRACE_BUILD_INTERRUPT(name, nr)
+#endif
+
+#define BUILD_INTERRUPT(name, nr)		\
+	BUILD_INTERRUPT3(name, nr, smp_##name);	\
+	TRACE_BUILD_INTERRUPT(name, nr)
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include <asm/entry_arch.h>
+
+ENTRY(coprocessor_error)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_coprocessor_error
+	jmp	error_code
+END(coprocessor_error)
+
+ENTRY(simd_coprocessor_error)
+	ASM_CLAC
+	pushl	$0
+#ifdef CONFIG_X86_INVD_BUG
+	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
+	ALTERNATIVE "pushl	$do_general_protection",	\
+		    "pushl	$do_simd_coprocessor_error",	\
+		    X86_FEATURE_XMM
+#else
+	pushl	$do_simd_coprocessor_error
+#endif
+	jmp	error_code
+END(simd_coprocessor_error)
+
+ENTRY(device_not_available)
+	ASM_CLAC
+	pushl	$-1				# mark this as an int
+	pushl	$do_device_not_available
+	jmp	error_code
+END(device_not_available)
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
+	iret
+	_ASM_EXTABLE(native_iret, iret_exc)
+END(native_iret)
+
+ENTRY(native_irq_enable_sysexit)
+	sti
+	sysexit
+END(native_irq_enable_sysexit)
+#endif
+
+ENTRY(overflow)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_overflow
+	jmp	error_code
+END(overflow)
+
+ENTRY(bounds)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_bounds
+	jmp	error_code
+END(bounds)
+
+ENTRY(invalid_op)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_invalid_op
+	jmp	error_code
+END(invalid_op)
+
+ENTRY(coprocessor_segment_overrun)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_coprocessor_segment_overrun
+	jmp	error_code
+END(coprocessor_segment_overrun)
+
+ENTRY(invalid_TSS)
+	ASM_CLAC
+	pushl	$do_invalid_TSS
+	jmp	error_code
+END(invalid_TSS)
+
+ENTRY(segment_not_present)
+	ASM_CLAC
+	pushl	$do_segment_not_present
+	jmp	error_code
+END(segment_not_present)
+
+ENTRY(stack_segment)
+	ASM_CLAC
+	pushl	$do_stack_segment
+	jmp	error_code
+END(stack_segment)
+
+ENTRY(alignment_check)
+	ASM_CLAC
+	pushl	$do_alignment_check
+	jmp	error_code
+END(alignment_check)
+
+ENTRY(divide_error)
+	ASM_CLAC
+	pushl	$0				# no error code
+	pushl	$do_divide_error
+	jmp	error_code
+END(divide_error)
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+	ASM_CLAC
+	pushl	$0
+	pushl	machine_check_vector
+	jmp	error_code
+END(machine_check)
+#endif
+
+ENTRY(spurious_interrupt_bug)
+	ASM_CLAC
+	pushl	$0
+	pushl	$do_spurious_interrupt_bug
+	jmp	error_code
+END(spurious_interrupt_bug)
+
+#ifdef CONFIG_XEN
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
+ENTRY(xen_sysenter_target)
+	addl	$5*4, %esp			/* remove xen-provided frame */
+	jmp	sysenter_past_esp
+
+ENTRY(xen_hypervisor_callback)
+	pushl	$-1				/* orig_ax = -1 => not a system call */
+	SAVE_ALL
+	TRACE_IRQS_OFF
+
+	/*
+	 * Check to see if we got the event in the critical
+	 * region in xen_iret_direct, after we've reenabled
+	 * events and checked for pending events.  This simulates
+	 * iret instruction's behaviour where it delivers a
+	 * pending interrupt when enabling interrupts:
+	 */
+	movl	PT_EIP(%esp), %eax
+	cmpl	$xen_iret_start_crit, %eax
+	jb	1f
+	cmpl	$xen_iret_end_crit, %eax
+	jae	1f
+
+	jmp	xen_iret_crit_fixup
+
+ENTRY(xen_do_upcall)
+1:	mov	%esp, %eax
+	call	xen_evtchn_do_upcall
+#ifndef CONFIG_PREEMPT
+	call	xen_maybe_preempt_hcall
+#endif
+	jmp	ret_from_intr
+ENDPROC(xen_hypervisor_callback)
+
+/*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ *  1. Fault while reloading DS, ES, FS or GS
+ *  2. Fault while executing IRET
+ * Category 1 we fix up by reattempting the load, and zeroing the segment
+ * register if the load fails.
+ * Category 2 we fix up by jumping to do_iret_error. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by maintaining a status value in EAX.
+ */
+ENTRY(xen_failsafe_callback)
+	pushl	%eax
+	movl	$1, %eax
+1:	mov	4(%esp), %ds
+2:	mov	8(%esp), %es
+3:	mov	12(%esp), %fs
+4:	mov	16(%esp), %gs
+	/* EAX == 0 => Category 1 (Bad segment)
+	   EAX != 0 => Category 2 (Bad IRET) */
+	testl	%eax, %eax
+	popl	%eax
+	lea	16(%esp), %esp
+	jz	5f
+	jmp	iret_exc
+5:	pushl	$-1				/* orig_ax = -1 => not a system call */
+	SAVE_ALL
+	jmp	ret_from_exception
+
+.section .fixup, "ax"
+6:	xorl	%eax, %eax
+	movl	%eax, 4(%esp)
+	jmp	1b
+7:	xorl	%eax, %eax
+	movl	%eax, 8(%esp)
+	jmp	2b
+8:	xorl	%eax, %eax
+	movl	%eax, 12(%esp)
+	jmp	3b
+9:	xorl	%eax, %eax
+	movl	%eax, 16(%esp)
+	jmp	4b
+.previous
+	_ASM_EXTABLE(1b, 6b)
+	_ASM_EXTABLE(2b, 7b)
+	_ASM_EXTABLE(3b, 8b)
+	_ASM_EXTABLE(4b, 9b)
+ENDPROC(xen_failsafe_callback)
+
+BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
+		xen_evtchn_do_upcall)
+
+#endif /* CONFIG_XEN */
+
+#if IS_ENABLED(CONFIG_HYPERV)
+
+BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
+	hyperv_vector_handler)
+
+#endif /* CONFIG_HYPERV */
+
+#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+ENTRY(mcount)
+	ret
+END(mcount)
+
+ENTRY(ftrace_caller)
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	pushl	$0				/* Pass NULL as regs pointer */
+	movl	4*4(%esp), %eax
+	movl	0x4(%ebp), %edx
+	movl	function_trace_op, %ecx
+	subl	$MCOUNT_INSN_SIZE, %eax
+
+.globl ftrace_call
+ftrace_call:
+	call	ftrace_stub
+
+	addl	$4, %esp			/* skip NULL pointer */
+	popl	%edx
+	popl	%ecx
+	popl	%eax
+ftrace_ret:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl ftrace_graph_call
+ftrace_graph_call:
+	jmp	ftrace_stub
+#endif
+
+.globl ftrace_stub
+ftrace_stub:
+	ret
+END(ftrace_caller)
+
+ENTRY(ftrace_regs_caller)
+	pushf	/* push flags before compare (in cs location) */
+
+	/*
+	 * i386 does not save SS and ESP when coming from kernel.
+	 * Instead, to get sp, &regs->sp is used (see ptrace.h).
+	 * Unfortunately, that means eflags must be at the same location
+	 * as the current return ip is. We move the return ip into the
+	 * ip location, and move flags into the return ip location.
+	 */
+	pushl	4(%esp)				/* save return ip into ip slot */
+
+	pushl	$0				/* Load 0 into orig_ax */
+	pushl	%gs
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+
+	movl	13*4(%esp), %eax		/* Get the saved flags */
+	movl	%eax, 14*4(%esp)		/* Move saved flags into regs->flags location */
+						/* clobbering return ip */
+	movl	$__KERNEL_CS, 13*4(%esp)
+
+	movl	12*4(%esp), %eax		/* Load ip (1st parameter) */
+	subl	$MCOUNT_INSN_SIZE, %eax		/* Adjust ip */
+	movl	0x4(%ebp), %edx			/* Load parent ip (2nd parameter) */
+	movl	function_trace_op, %ecx		/* Save ftrace_pos in 3rd parameter */
+	pushl	%esp				/* Save pt_regs as 4th parameter */
+
+GLOBAL(ftrace_regs_call)
+	call	ftrace_stub
+
+	addl	$4, %esp			/* Skip pt_regs */
+	movl	14*4(%esp), %eax		/* Move flags back into cs */
+	movl	%eax, 13*4(%esp)		/* Needed to keep addl	from modifying flags */
+	movl	12*4(%esp), %eax		/* Get return ip from regs->ip */
+	movl	%eax, 14*4(%esp)		/* Put return ip back for ret */
+
+	popl	%ebx
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	popl	%edi
+	popl	%ebp
+	popl	%eax
+	popl	%ds
+	popl	%es
+	popl	%fs
+	popl	%gs
+	addl	$8, %esp			/* Skip orig_ax and ip */
+	popf					/* Pop flags at end (no addl to corrupt flags) */
+	jmp	ftrace_ret
+
+	popf
+	jmp	ftrace_stub
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+
+ENTRY(mcount)
+	cmpl	$__PAGE_OFFSET, %esp
+	jb	ftrace_stub			/* Paging not enabled yet? */
+
+	cmpl	$ftrace_stub, ftrace_trace_function
+	jnz	trace
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	cmpl	$ftrace_stub, ftrace_graph_return
+	jnz	ftrace_graph_caller
+
+	cmpl	$ftrace_graph_entry_stub, ftrace_graph_entry
+	jnz	ftrace_graph_caller
+#endif
+.globl ftrace_stub
+ftrace_stub:
+	ret
+
+	/* taken from glibc */
+trace:
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	movl	0xc(%esp), %eax
+	movl	0x4(%ebp), %edx
+	subl	$MCOUNT_INSN_SIZE, %eax
+
+	call	*ftrace_trace_function
+
+	popl	%edx
+	popl	%ecx
+	popl	%eax
+	jmp	ftrace_stub
+END(mcount)
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+	pushl	%eax
+	pushl	%ecx
+	pushl	%edx
+	movl	0xc(%esp), %eax
+	lea	0x4(%ebp), %edx
+	movl	(%ebp), %ecx
+	subl	$MCOUNT_INSN_SIZE, %eax
+	call	prepare_ftrace_return
+	popl	%edx
+	popl	%ecx
+	popl	%eax
+	ret
+END(ftrace_graph_caller)
+
+.globl return_to_handler
+return_to_handler:
+	pushl	%eax
+	pushl	%edx
+	movl	%ebp, %eax
+	call	ftrace_return_to_handler
+	movl	%eax, %ecx
+	popl	%edx
+	popl	%eax
+	jmp	*%ecx
+#endif
+
+#ifdef CONFIG_TRACING
+ENTRY(trace_page_fault)
+	ASM_CLAC
+	pushl	$trace_do_page_fault
+	jmp	error_code
+END(trace_page_fault)
+#endif
+
+ENTRY(page_fault)
+	ASM_CLAC
+	pushl	$do_page_fault
+	ALIGN
+error_code:
+	/* the function address is in %gs's slot on the stack */
+	pushl	%fs
+	pushl	%es
+	pushl	%ds
+	pushl	%eax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+	cld
+	movl	$(__KERNEL_PERCPU), %ecx
+	movl	%ecx, %fs
+	UNWIND_ESPFIX_STACK
+	GS_TO_REG %ecx
+	movl	PT_GS(%esp), %edi		# get the function address
+	movl	PT_ORIG_EAX(%esp), %edx		# get the error code
+	movl	$-1, PT_ORIG_EAX(%esp)		# no syscall to restart
+	REG_TO_PTGS %ecx
+	SET_KERNEL_GS %ecx
+	movl	$(__USER_DS), %ecx
+	movl	%ecx, %ds
+	movl	%ecx, %es
+	TRACE_IRQS_OFF
+	movl	%esp, %eax			# pt_regs pointer
+	call	*%edi
+	jmp	ret_from_exception
+END(page_fault)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+.macro FIX_STACK offset ok label
+	cmpw	$__KERNEL_CS, 4(%esp)
+	jne	\ok
+\label:
+	movl	TSS_sysenter_sp0 + \offset(%esp), %esp
+	pushfl
+	pushl	$__KERNEL_CS
+	pushl	$sysenter_past_esp
+.endm
+
+ENTRY(debug)
+	ASM_CLAC
+	cmpl	$entry_SYSENTER_32, (%esp)
+	jne	debug_stack_correct
+	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
+debug_stack_correct:
+	pushl	$-1				# mark this as an int
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl	%edx, %edx			# error code 0
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_debug
+	jmp	ret_from_exception
+END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got  an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+	ASM_CLAC
+#ifdef CONFIG_X86_ESPFIX32
+	pushl	%eax
+	movl	%ss, %eax
+	cmpw	$__ESPFIX_SS, %ax
+	popl	%eax
+	je	nmi_espfix_stack
+#endif
+	cmpl	$entry_SYSENTER_32, (%esp)
+	je	nmi_stack_fixup
+	pushl	%eax
+	movl	%esp, %eax
+	/*
+	 * Do not access memory above the end of our stack page,
+	 * it might not exist.
+	 */
+	andl	$(THREAD_SIZE-1), %eax
+	cmpl	$(THREAD_SIZE-20), %eax
+	popl	%eax
+	jae	nmi_stack_correct
+	cmpl	$entry_SYSENTER_32, 12(%esp)
+	je	nmi_debug_stack_check
+nmi_stack_correct:
+	pushl	%eax
+	SAVE_ALL
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_nmi
+	jmp	restore_all_notrace
+
+nmi_stack_fixup:
+	FIX_STACK 12, nmi_stack_correct, 1
+	jmp	nmi_stack_correct
+
+nmi_debug_stack_check:
+	cmpw	$__KERNEL_CS, 16(%esp)
+	jne	nmi_stack_correct
+	cmpl	$debug, (%esp)
+	jb	nmi_stack_correct
+	cmpl	$debug_esp_fix_insn, (%esp)
+	ja	nmi_stack_correct
+	FIX_STACK 24, nmi_stack_correct, 1
+	jmp	nmi_stack_correct
+
+#ifdef CONFIG_X86_ESPFIX32
+nmi_espfix_stack:
+	/*
+	 * create the pointer to lss back
+	 */
+	pushl	%ss
+	pushl	%esp
+	addl	$4, (%esp)
+	/* copy the iret frame of 12 bytes */
+	.rept 3
+	pushl	16(%esp)
+	.endr
+	pushl	%eax
+	SAVE_ALL
+	FIXUP_ESPFIX_STACK			# %eax == %esp
+	xorl	%edx, %edx			# zero error code
+	call	do_nmi
+	RESTORE_REGS
+	lss	12+4(%esp), %esp		# back to espfix stack
+	jmp	irq_return
+#endif
+END(nmi)
+
+ENTRY(int3)
+	ASM_CLAC
+	pushl	$-1				# mark this as an int
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+	call	do_int3
+	jmp	ret_from_exception
+END(int3)
+
+ENTRY(general_protection)
+	pushl	$do_general_protection
+	jmp	error_code
+END(general_protection)
+
+#ifdef CONFIG_KVM_GUEST
+ENTRY(async_page_fault)
+	ASM_CLAC
+	pushl	$do_async_page_fault
+	jmp	error_code
+END(async_page_fault)
+#endif
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/entry/entry_64.S
index 0395a59f67c4..d2a0ed211bed 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -19,8 +19,6 @@
  * at the top of the kernel process stack.
  *
  * Some macro usage:
- * - CFI macros are used to generate dwarf2 unwind information for better
- * backtraces. They don't change any code.
  * - ENTRY/END Define functions in the symbol table.
  * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
  * - idtentry - Define exception entry points.
@@ -30,8 +28,7 @@
 #include <asm/segment.h>
 #include <asm/cache.h>
 #include <asm/errno.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
+#include "calling.h"
 #include <asm/asm-offsets.h>
 #include <asm/msr.h>
 #include <asm/unistd.h>
@@ -113,61 +110,6 @@ ENDPROC(native_usergs_sysret64)
 #endif
 
 /*
- * empty frame
- */
-	.macro EMPTY_FRAME start=1 offset=0
-	.if \start
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,8+\offset
-	.else
-	CFI_DEF_CFA_OFFSET 8+\offset
-	.endif
-	.endm
-
-/*
- * initial frame state for interrupts (and exceptions without error code)
- */
-	.macro INTR_FRAME start=1 offset=0
-	EMPTY_FRAME \start, 5*8+\offset
-	/*CFI_REL_OFFSET ss, 4*8+\offset*/
-	CFI_REL_OFFSET rsp, 3*8+\offset
-	/*CFI_REL_OFFSET rflags, 2*8+\offset*/
-	/*CFI_REL_OFFSET cs, 1*8+\offset*/
-	CFI_REL_OFFSET rip, 0*8+\offset
-	.endm
-
-/*
- * initial frame state for exceptions with error code (and interrupts
- * with vector already pushed)
- */
-	.macro XCPT_FRAME start=1 offset=0
-	INTR_FRAME \start, 1*8+\offset
-	.endm
-
-/*
- * frame that enables passing a complete pt_regs to a C function.
- */
-	.macro DEFAULT_FRAME start=1 offset=0
-	XCPT_FRAME \start, ORIG_RAX+\offset
-	CFI_REL_OFFSET rdi, RDI+\offset
-	CFI_REL_OFFSET rsi, RSI+\offset
-	CFI_REL_OFFSET rdx, RDX+\offset
-	CFI_REL_OFFSET rcx, RCX+\offset
-	CFI_REL_OFFSET rax, RAX+\offset
-	CFI_REL_OFFSET r8, R8+\offset
-	CFI_REL_OFFSET r9, R9+\offset
-	CFI_REL_OFFSET r10, R10+\offset
-	CFI_REL_OFFSET r11, R11+\offset
-	CFI_REL_OFFSET rbx, RBX+\offset
-	CFI_REL_OFFSET rbp, RBP+\offset
-	CFI_REL_OFFSET r12, R12+\offset
-	CFI_REL_OFFSET r13, R13+\offset
-	CFI_REL_OFFSET r14, R14+\offset
-	CFI_REL_OFFSET r15, R15+\offset
-	.endm
-
-/*
  * 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
  *
  * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
@@ -195,13 +137,7 @@ ENDPROC(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
-ENTRY(system_call)
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rip,rcx
-	/*CFI_REGISTER	rflags,r11*/
-
+ENTRY(entry_SYSCALL_64)
 	/*
 	 * Interrupts are off on entry.
 	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
@@ -213,14 +149,14 @@ ENTRY(system_call)
 	 * after the swapgs, so that it can do the swapgs
 	 * for the guest and jump here on syscall.
 	 */
-GLOBAL(system_call_after_swapgs)
+GLOBAL(entry_SYSCALL_64_after_swapgs)
 
 	movq	%rsp,PER_CPU_VAR(rsp_scratch)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack),%rsp
 
 	/* Construct struct pt_regs on stack */
-	pushq_cfi $__USER_DS			/* pt_regs->ss */
-	pushq_cfi PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
+	pushq $__USER_DS			/* pt_regs->ss */
+	pushq PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
 	/*
 	 * Re-enable interrupts.
 	 * We use 'rsp_scratch' as a scratch space, hence irq-off block above
@@ -229,26 +165,24 @@ GLOBAL(system_call_after_swapgs)
 	 * with using rsp_scratch:
 	 */
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi	%r11			/* pt_regs->flags */
-	pushq_cfi	$__USER_CS		/* pt_regs->cs */
-	pushq_cfi	%rcx			/* pt_regs->ip */
-	CFI_REL_OFFSET rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi	$-ENOSYS		/* pt_regs->ax */
-	pushq_cfi_reg	r8			/* pt_regs->r8 */
-	pushq_cfi_reg	r9			/* pt_regs->r9 */
-	pushq_cfi_reg	r10			/* pt_regs->r10 */
-	pushq_cfi_reg	r11			/* pt_regs->r11 */
+	pushq	%r11			/* pt_regs->flags */
+	pushq	$__USER_CS		/* pt_regs->cs */
+	pushq	%rcx			/* pt_regs->ip */
+	pushq	%rax			/* pt_regs->orig_ax */
+	pushq	%rdi			/* pt_regs->di */
+	pushq	%rsi			/* pt_regs->si */
+	pushq	%rdx			/* pt_regs->dx */
+	pushq	%rcx			/* pt_regs->cx */
+	pushq	$-ENOSYS		/* pt_regs->ax */
+	pushq	%r8			/* pt_regs->r8 */
+	pushq	%r9			/* pt_regs->r9 */
+	pushq	%r10			/* pt_regs->r10 */
+	pushq	%r11			/* pt_regs->r11 */
 	sub	$(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 6*8
 
 	testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
 	jnz tracesys
-system_call_fastpath:
+entry_SYSCALL_64_fastpath:
 #if __SYSCALL_MASK == ~0
 	cmpq $__NR_syscall_max,%rax
 #else
@@ -282,13 +216,9 @@ system_call_fastpath:
 	testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
 	jnz int_ret_from_sys_call_irqs_off	/* Go to the slow path */
 
-	CFI_REMEMBER_STATE
-
 	RESTORE_C_REGS_EXCEPT_RCX_R11
 	movq	RIP(%rsp),%rcx
-	CFI_REGISTER	rip,rcx
 	movq	EFLAGS(%rsp),%r11
-	/*CFI_REGISTER	rflags,r11*/
 	movq	RSP(%rsp),%rsp
 	/*
 	 * 64bit SYSRET restores rip from rcx,
@@ -307,8 +237,6 @@ system_call_fastpath:
 	 */
 	USERGS_SYSRET64
 
-	CFI_RESTORE_STATE
-
 	/* Do syscall entry tracing */
 tracesys:
 	movq %rsp, %rdi
@@ -318,7 +246,7 @@ tracesys:
 	jnz tracesys_phase2		/* if needed, run the slow path */
 	RESTORE_C_REGS_EXCEPT_RAX	/* else restore clobbered regs */
 	movq ORIG_RAX(%rsp), %rax
-	jmp system_call_fastpath	/*      and return to the fast path */
+	jmp entry_SYSCALL_64_fastpath	/*      and return to the fast path */
 
 tracesys_phase2:
 	SAVE_EXTRA_REGS
@@ -374,9 +302,9 @@ int_careful:
 	jnc  int_very_careful
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
+	pushq %rdi
 	SCHEDULE_USER
-	popq_cfi %rdi
+	popq %rdi
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp int_with_check
@@ -389,10 +317,10 @@ int_very_careful:
 	/* Check for syscall exit trace */
 	testl $_TIF_WORK_SYSCALL_EXIT,%edx
 	jz int_signal
-	pushq_cfi %rdi
+	pushq %rdi
 	leaq 8(%rsp),%rdi	# &ptregs -> arg1
 	call syscall_trace_leave
-	popq_cfi %rdi
+	popq %rdi
 	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
 	jmp int_restore_rest
 
@@ -475,27 +403,21 @@ syscall_return:
 	 * perf profiles.  Nothing jumps here.
 	 */
 syscall_return_via_sysret:
-	CFI_REMEMBER_STATE
 	/* rcx and r11 are already restored (see code above) */
 	RESTORE_C_REGS_EXCEPT_RCX_R11
 	movq RSP(%rsp),%rsp
 	USERGS_SYSRET64
-	CFI_RESTORE_STATE
 
 opportunistic_sysret_failed:
 	SWAPGS
 	jmp	restore_c_regs_and_iret
-	CFI_ENDPROC
-END(system_call)
+END(entry_SYSCALL_64)
 
 
 	.macro FORK_LIKE func
 ENTRY(stub_\func)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8		/* offset 8: return address */
 	SAVE_EXTRA_REGS 8
 	jmp sys_\func
-	CFI_ENDPROC
 END(stub_\func)
 	.endm
 
@@ -504,8 +426,6 @@ END(stub_\func)
 	FORK_LIKE  vfork
 
 ENTRY(stub_execve)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	call	sys_execve
 return_from_execve:
 	testl	%eax, %eax
@@ -515,11 +435,9 @@ return_from_execve:
 1:
 	/* must use IRET code path (pt_regs->cs may have changed) */
 	addq	$8, %rsp
-	CFI_ADJUST_CFA_OFFSET -8
 	ZERO_EXTRA_REGS
 	movq	%rax,RAX(%rsp)
 	jmp	int_ret_from_sys_call
-	CFI_ENDPROC
 END(stub_execve)
 /*
  * Remaining execve stubs are only 7 bytes long.
@@ -527,32 +445,23 @@ END(stub_execve)
  */
 	.align	8
 GLOBAL(stub_execveat)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	call	sys_execveat
 	jmp	return_from_execve
-	CFI_ENDPROC
 END(stub_execveat)
 
 #if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
 	.align	8
 GLOBAL(stub_x32_execve)
 GLOBAL(stub32_execve)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	call	compat_sys_execve
 	jmp	return_from_execve
-	CFI_ENDPROC
 END(stub32_execve)
 END(stub_x32_execve)
 	.align	8
 GLOBAL(stub_x32_execveat)
 GLOBAL(stub32_execveat)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	call	compat_sys_execveat
 	jmp	return_from_execve
-	CFI_ENDPROC
 END(stub32_execveat)
 END(stub_x32_execveat)
 #endif
@@ -562,8 +471,6 @@ END(stub_x32_execveat)
  * This cannot be done with SYSRET, so use the IRET return path instead.
  */
 ENTRY(stub_rt_sigreturn)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	/*
 	 * SAVE_EXTRA_REGS result is not normally needed:
 	 * sigreturn overwrites all pt_regs->GPREGS.
@@ -575,21 +482,16 @@ ENTRY(stub_rt_sigreturn)
 	call sys_rt_sigreturn
 return_from_stub:
 	addq	$8, %rsp
-	CFI_ADJUST_CFA_OFFSET -8
 	RESTORE_EXTRA_REGS
 	movq %rax,RAX(%rsp)
 	jmp int_ret_from_sys_call
-	CFI_ENDPROC
 END(stub_rt_sigreturn)
 
 #ifdef CONFIG_X86_X32_ABI
 ENTRY(stub_x32_rt_sigreturn)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
 	SAVE_EXTRA_REGS 8
 	call sys32_x32_rt_sigreturn
 	jmp  return_from_stub
-	CFI_ENDPROC
 END(stub_x32_rt_sigreturn)
 #endif
 
@@ -599,12 +501,11 @@ END(stub_x32_rt_sigreturn)
  * rdi: prev task we switched from
  */
 ENTRY(ret_from_fork)
-	DEFAULT_FRAME
 
 	LOCK ; btr $TIF_FORK,TI_flags(%r8)
 
-	pushq_cfi $0x0002
-	popfq_cfi				# reset kernel eflags
+	pushq $0x0002
+	popfq				# reset kernel eflags
 
 	call schedule_tail			# rdi: 'prev' task parameter
 
@@ -615,7 +516,7 @@ ENTRY(ret_from_fork)
 	/*
 	 * By the time we get here, we have no idea whether our pt_regs,
 	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
-	 * the slow path, or one of the ia32entry paths.
+	 * the slow path, or one of the 32-bit compat paths.
 	 * Use IRET code path to return, since it can safely handle
 	 * all of the above.
 	 */
@@ -628,7 +529,6 @@ ENTRY(ret_from_fork)
 	movl $0, RAX(%rsp)
 	RESTORE_EXTRA_REGS
 	jmp int_ret_from_sys_call
-	CFI_ENDPROC
 END(ret_from_fork)
 
 /*
@@ -637,16 +537,13 @@ END(ret_from_fork)
  */
 	.align 8
 ENTRY(irq_entries_start)
-	INTR_FRAME
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushq_cfi $(~vector+0x80)	/* Note: always in signed byte range */
+	pushq $(~vector+0x80)	/* Note: always in signed byte range */
     vector=vector+1
 	jmp	common_interrupt
-	CFI_ADJUST_CFA_OFFSET -8
 	.align	8
     .endr
-	CFI_ENDPROC
 END(irq_entries_start)
 
 /*
@@ -688,17 +585,7 @@ END(irq_entries_start)
 	movq %rsp, %rsi
 	incl PER_CPU_VAR(irq_count)
 	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	CFI_DEF_CFA_REGISTER	rsi
 	pushq %rsi
-	/*
-	 * For debugger:
-	 * "CFA (Current Frame Address) is the value on stack + offset"
-	 */
-	CFI_ESCAPE	0x0f /* DW_CFA_def_cfa_expression */, 6, \
-			0x77 /* DW_OP_breg7 (rsp) */, 0, \
-			0x06 /* DW_OP_deref */, \
-			0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \
-			0x22 /* DW_OP_plus */
 	/* We entered an interrupt context - irqs are off: */
 	TRACE_IRQS_OFF
 
@@ -711,7 +598,6 @@ END(irq_entries_start)
 	 */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
-	XCPT_FRAME
 	ASM_CLAC
 	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
@@ -723,16 +609,13 @@ ret_from_intr:
 
 	/* Restore saved previous stack */
 	popq %rsi
-	CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */
 	/* return code expects complete pt_regs - adjust rsp accordingly: */
 	leaq -RBP(%rsi),%rsp
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET	RBP
 
 	testb	$3, CS(%rsp)
 	jz	retint_kernel
 	/* Interrupt came from user space */
-
+retint_user:
 	GET_THREAD_INFO(%rcx)
 	/*
 	 * %rcx: thread info. Interrupts off.
@@ -743,7 +626,6 @@ retint_check:
 	LOCKDEP_SYS_EXIT_IRQ
 	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
-	CFI_REMEMBER_STATE
 	jnz  retint_careful
 
 retint_swapgs:		/* return to user-space */
@@ -781,8 +663,6 @@ retint_kernel:
 restore_c_regs_and_iret:
 	RESTORE_C_REGS
 	REMOVE_PT_GPREGS_FROM_STACK 8
-
-irq_return:
 	INTERRUPT_RETURN
 
 ENTRY(native_iret)
@@ -807,8 +687,8 @@ native_irq_return_iret:
 
 #ifdef CONFIG_X86_ESPFIX64
 native_irq_return_ldt:
-	pushq_cfi %rax
-	pushq_cfi %rdi
+	pushq %rax
+	pushq %rdi
 	SWAPGS
 	movq PER_CPU_VAR(espfix_waddr),%rdi
 	movq %rax,(0*8)(%rdi)	/* RAX */
@@ -823,24 +703,23 @@ native_irq_return_ldt:
 	movq (5*8)(%rsp),%rax	/* RSP */
 	movq %rax,(4*8)(%rdi)
 	andl $0xffff0000,%eax
-	popq_cfi %rdi
+	popq %rdi
 	orq PER_CPU_VAR(espfix_stack),%rax
 	SWAPGS
 	movq %rax,%rsp
-	popq_cfi %rax
+	popq %rax
 	jmp native_irq_return_iret
 #endif
 
 	/* edi: workmask, edx: work */
 retint_careful:
-	CFI_RESTORE_STATE
 	bt    $TIF_NEED_RESCHED,%edx
 	jnc   retint_signal
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
+	pushq %rdi
 	SCHEDULE_USER
-	popq_cfi %rdi
+	popq %rdi
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
@@ -862,7 +741,6 @@ retint_signal:
 	GET_THREAD_INFO(%rcx)
 	jmp retint_with_reschedule
 
-	CFI_ENDPROC
 END(common_interrupt)
 
 /*
@@ -870,13 +748,11 @@ END(common_interrupt)
  */
 .macro apicinterrupt3 num sym do_sym
 ENTRY(\sym)
-	INTR_FRAME
 	ASM_CLAC
-	pushq_cfi $~(\num)
+	pushq $~(\num)
 .Lcommon_\sym:
 	interrupt \do_sym
 	jmp ret_from_intr
-	CFI_ENDPROC
 END(\sym)
 .endm
 
@@ -966,24 +842,17 @@ ENTRY(\sym)
 	.error "using shift_ist requires paranoid=1"
 	.endif
 
-	.if \has_error_code
-	XCPT_FRAME
-	.else
-	INTR_FRAME
-	.endif
-
 	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 
 	.ifeq \has_error_code
-	pushq_cfi $-1			/* ORIG_RAX: no syscall to restart */
+	pushq $-1			/* ORIG_RAX: no syscall to restart */
 	.endif
 
 	ALLOC_PT_GPREGS_ON_STACK
 
 	.if \paranoid
 	.if \paranoid == 1
-	CFI_REMEMBER_STATE
 	testb	$3, CS(%rsp)		/* If coming from userspace, switch */
 	jnz 1f				/* stacks. */
 	.endif
@@ -993,8 +862,6 @@ ENTRY(\sym)
 	.endif
 	/* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
 
-	DEFAULT_FRAME 0
-
 	.if \paranoid
 	.if \shift_ist != -1
 	TRACE_IRQS_OFF_DEBUG		/* reload IDT in case of recursion */
@@ -1030,7 +897,6 @@ ENTRY(\sym)
 	.endif
 
 	.if \paranoid == 1
-	CFI_RESTORE_STATE
 	/*
 	 * Paranoid entry from userspace.  Switch stacks and treat it
 	 * as a normal entry.  This means that paranoid handlers
@@ -1039,7 +905,6 @@ ENTRY(\sym)
 1:
 	call error_entry
 
-	DEFAULT_FRAME 0
 
 	movq %rsp,%rdi			/* pt_regs pointer */
 	call sync_regs
@@ -1058,8 +923,6 @@ ENTRY(\sym)
 
 	jmp error_exit			/* %ebx: no swapgs flag */
 	.endif
-
-	CFI_ENDPROC
 END(\sym)
 .endm
 
@@ -1092,17 +955,15 @@ idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
 	/* Reload gs selector with exception handling */
 	/* edi:  new selector */
 ENTRY(native_load_gs_index)
-	CFI_STARTPROC
-	pushfq_cfi
+	pushfq
 	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
 	SWAPGS
 gs_change:
 	movl %edi,%gs
 2:	mfence		/* workaround */
 	SWAPGS
-	popfq_cfi
+	popfq
 	ret
-	CFI_ENDPROC
 END(native_load_gs_index)
 
 	_ASM_EXTABLE(gs_change,bad_gs)
@@ -1117,22 +978,15 @@ bad_gs:
 
 /* Call softirq on interrupt stack. Interrupts are off. */
 ENTRY(do_softirq_own_stack)
-	CFI_STARTPROC
-	pushq_cfi %rbp
-	CFI_REL_OFFSET rbp,0
+	pushq %rbp
 	mov  %rsp,%rbp
-	CFI_DEF_CFA_REGISTER rbp
 	incl PER_CPU_VAR(irq_count)
 	cmove PER_CPU_VAR(irq_stack_ptr),%rsp
 	push  %rbp			# backlink for old unwinder
 	call __do_softirq
 	leaveq
-	CFI_RESTORE		rbp
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET   -8
 	decl PER_CPU_VAR(irq_count)
 	ret
-	CFI_ENDPROC
 END(do_softirq_own_stack)
 
 #ifdef CONFIG_XEN
@@ -1152,28 +1006,22 @@ idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
  * activation and restart the handler using the previous one.
  */
 ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
-	CFI_STARTPROC
 /*
  * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
  * see the correct pointer to the pt_regs
  */
 	movq %rdi, %rsp            # we don't return, adjust the stack frame
-	CFI_ENDPROC
-	DEFAULT_FRAME
 11:	incl PER_CPU_VAR(irq_count)
 	movq %rsp,%rbp
-	CFI_DEF_CFA_REGISTER rbp
 	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
 	pushq %rbp			# backlink for old unwinder
 	call xen_evtchn_do_upcall
 	popq %rsp
-	CFI_DEF_CFA_REGISTER rsp
 	decl PER_CPU_VAR(irq_count)
 #ifndef CONFIG_PREEMPT
 	call xen_maybe_preempt_hcall
 #endif
 	jmp  error_exit
-	CFI_ENDPROC
 END(xen_do_hypervisor_callback)
 
 /*
@@ -1190,16 +1038,8 @@ END(xen_do_hypervisor_callback)
  * with its current contents: any discrepancy means we in category 1.
  */
 ENTRY(xen_failsafe_callback)
-	INTR_FRAME 1 (6*8)
-	/*CFI_REL_OFFSET gs,GS*/
-	/*CFI_REL_OFFSET fs,FS*/
-	/*CFI_REL_OFFSET es,ES*/
-	/*CFI_REL_OFFSET ds,DS*/
-	CFI_REL_OFFSET r11,8
-	CFI_REL_OFFSET rcx,0
 	movl %ds,%ecx
 	cmpw %cx,0x10(%rsp)
-	CFI_REMEMBER_STATE
 	jne 1f
 	movl %es,%ecx
 	cmpw %cx,0x18(%rsp)
@@ -1212,29 +1052,21 @@ ENTRY(xen_failsafe_callback)
 	jne 1f
 	/* All segments match their saved values => Category 2 (Bad IRET). */
 	movq (%rsp),%rcx
-	CFI_RESTORE rcx
 	movq 8(%rsp),%r11
-	CFI_RESTORE r11
 	addq $0x30,%rsp
-	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq_cfi $0	/* RIP */
-	pushq_cfi %r11
-	pushq_cfi %rcx
+	pushq $0	/* RIP */
+	pushq %r11
+	pushq %rcx
 	jmp general_protection
-	CFI_RESTORE_STATE
 1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
 	movq (%rsp),%rcx
-	CFI_RESTORE rcx
 	movq 8(%rsp),%r11
-	CFI_RESTORE r11
 	addq $0x30,%rsp
-	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq_cfi $-1 /* orig_ax = -1 => not a system call */
+	pushq $-1 /* orig_ax = -1 => not a system call */
 	ALLOC_PT_GPREGS_ON_STACK
 	SAVE_C_REGS
 	SAVE_EXTRA_REGS
 	jmp error_exit
-	CFI_ENDPROC
 END(xen_failsafe_callback)
 
 apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
@@ -1270,7 +1102,6 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(
  * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
  */
 ENTRY(paranoid_entry)
-	XCPT_FRAME 1 15*8
 	cld
 	SAVE_C_REGS 8
 	SAVE_EXTRA_REGS 8
@@ -1282,7 +1113,6 @@ ENTRY(paranoid_entry)
 	SWAPGS
 	xorl %ebx,%ebx
 1:	ret
-	CFI_ENDPROC
 END(paranoid_entry)
 
 /*
@@ -1297,7 +1127,6 @@ END(paranoid_entry)
  */
 /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
 ENTRY(paranoid_exit)
-	DEFAULT_FRAME
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF_DEBUG
 	testl %ebx,%ebx				/* swapgs needed? */
@@ -1312,7 +1141,6 @@ paranoid_exit_restore:
 	RESTORE_C_REGS
 	REMOVE_PT_GPREGS_FROM_STACK 8
 	INTERRUPT_RETURN
-	CFI_ENDPROC
 END(paranoid_exit)
 
 /*
@@ -1320,7 +1148,6 @@ END(paranoid_exit)
  * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
  */
 ENTRY(error_entry)
-	XCPT_FRAME 1 15*8
 	cld
 	SAVE_C_REGS 8
 	SAVE_EXTRA_REGS 8
@@ -1340,7 +1167,6 @@ error_sti:
 	 * for these here too.
 	 */
 error_kernelspace:
-	CFI_REL_OFFSET rcx, RCX+8
 	incl %ebx
 	leaq native_irq_return_iret(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
@@ -1364,32 +1190,22 @@ error_bad_iret:
 	mov %rax,%rsp
 	decl %ebx	/* Return to usergs */
 	jmp error_sti
-	CFI_ENDPROC
 END(error_entry)
 
 
 /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
 ENTRY(error_exit)
-	DEFAULT_FRAME
 	movl %ebx,%eax
 	RESTORE_EXTRA_REGS
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
 	testl %eax,%eax
 	jnz retint_kernel
-	LOCKDEP_SYS_EXIT_IRQ
-	movl TI_flags(%rcx),%edx
-	movl $_TIF_WORK_MASK,%edi
-	andl %edi,%edx
-	jnz retint_careful
-	jmp retint_swapgs
-	CFI_ENDPROC
+	jmp retint_user
 END(error_exit)
 
 /* Runs on exception stack */
 ENTRY(nmi)
-	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	/*
 	 * We allow breakpoints in NMIs. If a breakpoint occurs, then
@@ -1424,8 +1240,7 @@ ENTRY(nmi)
 	 */
 
 	/* Use %rdx as our temp variable throughout */
-	pushq_cfi %rdx
-	CFI_REL_OFFSET rdx, 0
+	pushq %rdx
 
 	/*
 	 * If %cs was not the kernel segment, then the NMI triggered in user
@@ -1459,8 +1274,6 @@ ENTRY(nmi)
 	jb	first_nmi
 	/* Ah, it is within the NMI stack, treat it as nested */
 
-	CFI_REMEMBER_STATE
-
 nested_nmi:
 	/*
 	 * Do nothing if we interrupted the fixup in repeat_nmi.
@@ -1478,26 +1291,22 @@ nested_nmi:
 	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
 	leaq -1*8(%rsp), %rdx
 	movq %rdx, %rsp
-	CFI_ADJUST_CFA_OFFSET 1*8
 	leaq -10*8(%rsp), %rdx
-	pushq_cfi $__KERNEL_DS
-	pushq_cfi %rdx
-	pushfq_cfi
-	pushq_cfi $__KERNEL_CS
-	pushq_cfi $repeat_nmi
+	pushq $__KERNEL_DS
+	pushq %rdx
+	pushfq
+	pushq $__KERNEL_CS
+	pushq $repeat_nmi
 
 	/* Put stack back */
 	addq $(6*8), %rsp
-	CFI_ADJUST_CFA_OFFSET -6*8
 
 nested_nmi_out:
-	popq_cfi %rdx
-	CFI_RESTORE rdx
+	popq %rdx
 
 	/* No need to check faults here */
 	INTERRUPT_RETURN
 
-	CFI_RESTORE_STATE
 first_nmi:
 	/*
 	 * Because nested NMIs will use the pushed location that we
@@ -1536,22 +1345,19 @@ first_nmi:
 	 */
 	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
 	movq (%rsp), %rdx
-	CFI_RESTORE rdx
 
 	/* Set the NMI executing variable on the stack. */
-	pushq_cfi $1
+	pushq $1
 
 	/*
 	 * Leave room for the "copied" frame
 	 */
 	subq $(5*8), %rsp
-	CFI_ADJUST_CFA_OFFSET 5*8
 
 	/* Copy the stack frame to the Saved frame */
 	.rept 5
-	pushq_cfi 11*8(%rsp)
+	pushq 11*8(%rsp)
 	.endr
-	CFI_DEF_CFA_OFFSET 5*8
 
 	/* Everything up to here is safe from nested NMIs */
 
@@ -1574,12 +1380,10 @@ repeat_nmi:
 
 	/* Make another copy, this one may be modified by nested NMIs */
 	addq $(10*8), %rsp
-	CFI_ADJUST_CFA_OFFSET -10*8
 	.rept 5
-	pushq_cfi -6*8(%rsp)
+	pushq -6*8(%rsp)
 	.endr
 	subq $(5*8), %rsp
-	CFI_DEF_CFA_OFFSET 5*8
 end_repeat_nmi:
 
 	/*
@@ -1587,7 +1391,7 @@ end_repeat_nmi:
 	 * NMI if the first NMI took an exception and reset our iret stack
 	 * so that we repeat another NMI.
 	 */
-	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
+	pushq $-1		/* ORIG_RAX: no syscall to restart */
 	ALLOC_PT_GPREGS_ON_STACK
 
 	/*
@@ -1598,7 +1402,6 @@ end_repeat_nmi:
 	 * exceptions might do.
 	 */
 	call paranoid_entry
-	DEFAULT_FRAME 0
 
 	/*
 	 * Save off the CR2 register. If we take a page fault in the NMI then
@@ -1634,14 +1437,11 @@ nmi_restore:
 
 	/* Clear the NMI executing stack variable */
 	movq $0, 5*8(%rsp)
-	jmp irq_return
-	CFI_ENDPROC
+	INTERRUPT_RETURN
 END(nmi)
 
 ENTRY(ignore_sysret)
-	CFI_STARTPROC
 	mov $-ENOSYS,%eax
 	sysret
-	CFI_ENDPROC
 END(ignore_sysret)
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
new file mode 100644
index 000000000000..59840e33d203
--- /dev/null
+++ b/arch/x86/entry/entry_64_compat.S
@@ -0,0 +1,547 @@
+/*
+ * Compatibility mode system call entry point for x86-64.
+ *
+ * Copyright 2000-2002 Andi Kleen, SuSE Labs.
+ */
+#include "calling.h"
+#include <asm/asm-offsets.h>
+#include <asm/current.h>
+#include <asm/errno.h>
+#include <asm/ia32_unistd.h>
+#include <asm/thread_info.h>
+#include <asm/segment.h>
+#include <asm/irqflags.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+#include <linux/linkage.h>
+#include <linux/err.h>
+
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE		0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+# define sysexit_audit		ia32_ret_from_sys_call
+# define sysretl_audit		ia32_ret_from_sys_call
+#endif
+
+	.section .entry.text, "ax"
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_usergs_sysret32)
+	swapgs
+	sysretl
+ENDPROC(native_usergs_sysret32)
+#endif
+
+/*
+ * 32-bit SYSENTER instruction entry.
+ *
+ * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
+ * IF and VM in rflags are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old rip (!!!) and rflags.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  user stack
+ * 0(%ebp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(entry_SYSENTER_compat)
+	/*
+	 * Interrupts are off on entry.
+	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+	 * it is too small to ever cause noticeable irq latency.
+	 */
+	SWAPGS_UNSAFE_STACK
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
+	/* Zero-extending 32-bit regs, do not remove */
+	movl	%ebp, %ebp
+	movl	%eax, %eax
+
+	movl	ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
+
+	/* Construct struct pt_regs on stack */
+	pushq	$__USER32_DS		/* pt_regs->ss */
+	pushq	%rbp			/* pt_regs->sp */
+	pushfq				/* pt_regs->flags */
+	pushq	$__USER32_CS		/* pt_regs->cs */
+	pushq	%r10			/* pt_regs->ip = thread_info->sysenter_return */
+	pushq	%rax			/* pt_regs->orig_ax */
+	pushq	%rdi			/* pt_regs->di */
+	pushq	%rsi			/* pt_regs->si */
+	pushq	%rdx			/* pt_regs->dx */
+	pushq	%rcx			/* pt_regs->cx */
+	pushq	$-ENOSYS		/* pt_regs->ax */
+	cld
+	sub	$(10*8), %rsp /* pt_regs->r8-11, bp, bx, r12-15 not saved */
+
+	/*
+	 * no need to do an access_ok check here because rbp has been
+	 * 32-bit zero extended
+	 */
+	ASM_STAC
+1:	movl	(%rbp), %ebp
+	_ASM_EXTABLE(1b, ia32_badarg)
+	ASM_CLAC
+
+	/*
+	 * Sysenter doesn't filter flags, so we need to clear NT
+	 * ourselves.  To save a few cycles, we can check whether
+	 * NT was set instead of doing an unconditional popfq.
+	 */
+	testl	$X86_EFLAGS_NT, EFLAGS(%rsp)
+	jnz	sysenter_fix_flags
+sysenter_flags_fixed:
+
+	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	sysenter_tracesys
+
+sysenter_do_call:
+	/* 32-bit syscall -> 64-bit C ABI argument conversion */
+	movl	%edi, %r8d		/* arg5 */
+	movl	%ebp, %r9d		/* arg6 */
+	xchg	%ecx, %esi		/* rsi:arg2, rcx:arg4 */
+	movl	%ebx, %edi		/* arg1 */
+	movl	%edx, %edx		/* arg3 (zero extension) */
+sysenter_dispatch:
+	cmpq	$(IA32_NR_syscalls-1), %rax
+	ja	1f
+	call	*ia32_sys_call_table(, %rax, 8)
+	movq	%rax, RAX(%rsp)
+1:
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	sysexit_audit
+sysexit_from_sys_call:
+	/*
+	 * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
+	 * NMI between STI and SYSEXIT has poorly specified behavior,
+	 * and and NMI followed by an IRQ with usergs is fatal.  So
+	 * we just pretend we're using SYSEXIT but we really use
+	 * SYSRETL instead.
+	 *
+	 * This code path is still called 'sysexit' because it pairs
+	 * with 'sysenter' and it uses the SYSENTER calling convention.
+	 */
+	andl    $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+	movl	RIP(%rsp), %ecx		/* User %eip */
+	RESTORE_RSI_RDI
+	xorl	%edx, %edx		/* Do not leak kernel information */
+	xorq	%r8, %r8
+	xorq	%r9, %r9
+	xorq	%r10, %r10
+	movl	EFLAGS(%rsp), %r11d	/* User eflags */
+	TRACE_IRQS_ON
+
+	/*
+	 * SYSRETL works even on Intel CPUs.  Use it in preference to SYSEXIT,
+	 * since it avoids a dicey window with interrupts enabled.
+	 */
+	movl	RSP(%rsp), %esp
+
+	/*
+	 * USERGS_SYSRET32 does:
+	 *  gsbase = user's gs base
+	 *  eip = ecx
+	 *  rflags = r11
+	 *  cs = __USER32_CS
+	 *  ss = __USER_DS
+	 *
+	 * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
+	 *
+	 *  pop %ebp
+	 *  pop %edx
+	 *  pop %ecx
+	 *
+	 * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
+	 * avoid info leaks.  R11 ends up with VDSO32_SYSENTER_RETURN's
+	 * address (already known to user code), and R12-R15 are
+	 * callee-saved and therefore don't contain any interesting
+	 * kernel data.
+	 */
+	USERGS_SYSRET32
+
+#ifdef CONFIG_AUDITSYSCALL
+	.macro auditsys_entry_common
+	movl	%esi, %r8d		/* 5th arg: 4th syscall arg */
+	movl	%ecx, %r9d		/* swap with edx */
+	movl	%edx, %ecx		/* 4th arg: 3rd syscall arg */
+	movl	%r9d, %edx		/* 3rd arg: 2nd syscall arg */
+	movl	%ebx, %esi		/* 2nd arg: 1st syscall arg */
+	movl	%eax, %edi		/* 1st arg: syscall number */
+	call	__audit_syscall_entry
+	movl	ORIG_RAX(%rsp), %eax	/* reload syscall number */
+	movl	%ebx, %edi		/* reload 1st syscall arg */
+	movl	RCX(%rsp), %esi		/* reload 2nd syscall arg */
+	movl	RDX(%rsp), %edx		/* reload 3rd syscall arg */
+	movl	RSI(%rsp), %ecx		/* reload 4th syscall arg */
+	movl	RDI(%rsp), %r8d		/* reload 5th syscall arg */
+	.endm
+
+	.macro auditsys_exit exit
+	testl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	ia32_ret_from_sys_call
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	movl	%eax, %esi		/* second arg, syscall return value */
+	cmpl	$-MAX_ERRNO, %eax	/* is it an error ? */
+	jbe	1f
+	movslq	%eax, %rsi		/* if error sign extend to 64 bits */
+1:	setbe	%al			/* 1 if error, 0 if not */
+	movzbl	%al, %edi		/* zero-extend that into %edi */
+	call	__audit_syscall_exit
+	movq	RAX(%rsp), %rax		/* reload syscall return value */
+	movl	$(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %edi
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	testl	%edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jz	\exit
+	xorl	%eax, %eax		/* Do not leak kernel information */
+	movq	%rax, R11(%rsp)
+	movq	%rax, R10(%rsp)
+	movq	%rax, R9(%rsp)
+	movq	%rax, R8(%rsp)
+	jmp	int_with_check
+	.endm
+
+sysenter_auditsys:
+	auditsys_entry_common
+	movl	%ebp, %r9d		/* reload 6th syscall arg */
+	jmp	sysenter_dispatch
+
+sysexit_audit:
+	auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_fix_flags:
+	pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
+	popfq
+	jmp	sysenter_flags_fixed
+
+sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jz	sysenter_auditsys
+#endif
+	SAVE_EXTRA_REGS
+	xorl	%eax, %eax		/* Do not leak kernel information */
+	movq	%rax, R11(%rsp)
+	movq	%rax, R10(%rsp)
+	movq	%rax, R9(%rsp)
+	movq	%rax, R8(%rsp)
+	movq	%rsp, %rdi		/* &pt_regs -> arg1 */
+	call	syscall_trace_enter
+
+	/* Reload arg registers from stack. (see sysenter_tracesys) */
+	movl	RCX(%rsp), %ecx
+	movl	RDX(%rsp), %edx
+	movl	RSI(%rsp), %esi
+	movl	RDI(%rsp), %edi
+	movl	%eax, %eax		/* zero extension */
+
+	RESTORE_EXTRA_REGS
+	jmp	sysenter_do_call
+ENDPROC(entry_SYSENTER_compat)
+
+/*
+ * 32-bit SYSCALL instruction entry.
+ *
+ * 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
+ * then loads new ss, cs, and rip from previously programmed MSRs.
+ * rflags gets masked by a value from another MSR (so CLD and CLAC
+ * are not needed). SYSCALL does not save anything on the stack
+ * and does not change rsp.
+ *
+ * Note: rflags saving+masking-with-MSR happens only in Long mode
+ * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it).
+ * Don't get confused: rflags saving+masking depends on Long Mode Active bit
+ * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
+ * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
+ *
+ * Arguments:
+ * eax  system call number
+ * ecx  return address
+ * ebx  arg1
+ * ebp  arg2	(note: not saved in the stack frame, should not be touched)
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * esp  user stack
+ * 0(%esp) arg6
+ *
+ * This is purely a fast path. For anything complicated we use the int 0x80
+ * path below. We set up a complete hardware stack frame to share code
+ * with the int 0x80 path.
+ */
+ENTRY(entry_SYSCALL_compat)
+	/*
+	 * Interrupts are off on entry.
+	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+	 * it is too small to ever cause noticeable irq latency.
+	 */
+	SWAPGS_UNSAFE_STACK
+	movl	%esp, %r8d
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
+	/* Zero-extending 32-bit regs, do not remove */
+	movl	%eax, %eax
+
+	/* Construct struct pt_regs on stack */
+	pushq	$__USER32_DS		/* pt_regs->ss */
+	pushq	%r8			/* pt_regs->sp */
+	pushq	%r11			/* pt_regs->flags */
+	pushq	$__USER32_CS		/* pt_regs->cs */
+	pushq	%rcx			/* pt_regs->ip */
+	pushq	%rax			/* pt_regs->orig_ax */
+	pushq	%rdi			/* pt_regs->di */
+	pushq	%rsi			/* pt_regs->si */
+	pushq	%rdx			/* pt_regs->dx */
+	pushq	%rbp			/* pt_regs->cx */
+	movl	%ebp, %ecx
+	pushq	$-ENOSYS		/* pt_regs->ax */
+	sub	$(10*8), %rsp		/* pt_regs->r8-11, bp, bx, r12-15 not saved */
+
+	/*
+	 * No need to do an access_ok check here because r8 has been
+	 * 32-bit zero extended:
+	 */
+	ASM_STAC
+1:	movl	(%r8), %ebp
+	_ASM_EXTABLE(1b, ia32_badarg)
+	ASM_CLAC
+	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz   cstar_tracesys
+
+cstar_do_call:
+	/* 32-bit syscall -> 64-bit C ABI argument conversion */
+	movl	%edi, %r8d		/* arg5 */
+	movl	%ebp, %r9d		/* arg6 */
+	xchg	%ecx, %esi		/* rsi:arg2, rcx:arg4 */
+	movl	%ebx, %edi		/* arg1 */
+	movl	%edx, %edx		/* arg3 (zero extension) */
+
+cstar_dispatch:
+	cmpq	$(IA32_NR_syscalls-1), %rax
+	ja	1f
+
+	call	*ia32_sys_call_table(, %rax, 8)
+	movq	%rax, RAX(%rsp)
+1:
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	sysretl_audit
+
+sysretl_from_sys_call:
+	andl	$~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+	movl	RCX(%rsp), %ebp
+	RESTORE_RSI_RDI_RDX
+	movl	RIP(%rsp), %ecx
+	movl	EFLAGS(%rsp), %r11d
+	xorq	%r10, %r10
+	xorq	%r9, %r9
+	xorq	%r8, %r8
+	TRACE_IRQS_ON
+	movl	RSP(%rsp), %esp
+	/*
+	 * 64-bit->32-bit SYSRET restores eip from ecx,
+	 * eflags from r11 (but RF and VM bits are forced to 0),
+	 * cs and ss are loaded from MSRs.
+	 * (Note: 32-bit->32-bit SYSRET is different: since r11
+	 * does not exist, it merely sets eflags.IF=1).
+	 *
+	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
+	 * descriptor is not reinitialized.  This means that we must
+	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
+	 * exit the kernel, and re-enter using an interrupt vector.  (All
+	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
+	 * from happening by reloading SS in __switch_to.
+	 */
+	USERGS_SYSRET32
+
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
+	auditsys_entry_common
+	movl	%ebp, %r9d		/* reload 6th syscall arg */
+	jmp	cstar_dispatch
+
+sysretl_audit:
+	auditsys_exit sysretl_from_sys_call
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jz	cstar_auditsys
+#endif
+	SAVE_EXTRA_REGS
+	xorl	%eax, %eax		/* Do not leak kernel information */
+	movq	%rax, R11(%rsp)
+	movq	%rax, R10(%rsp)
+	movq	%rax, R9(%rsp)
+	movq	%rax, R8(%rsp)
+	movq	%rsp, %rdi		/* &pt_regs -> arg1 */
+	call	syscall_trace_enter
+
+	/* Reload arg registers from stack. (see sysenter_tracesys) */
+	movl	RCX(%rsp), %ecx
+	movl	RDX(%rsp), %edx
+	movl	RSI(%rsp), %esi
+	movl	RDI(%rsp), %edi
+	movl	%eax, %eax		/* zero extension */
+
+	RESTORE_EXTRA_REGS
+	jmp	cstar_do_call
+END(entry_SYSCALL_compat)
+
+ia32_badarg:
+	ASM_CLAC
+	movq	$-EFAULT, %rax
+	jmp	ia32_sysret
+
+ia32_ret_from_sys_call:
+	xorl	%eax, %eax		/* Do not leak kernel information */
+	movq	%rax, R11(%rsp)
+	movq	%rax, R10(%rsp)
+	movq	%rax, R9(%rsp)
+	movq	%rax, R8(%rsp)
+	jmp	int_ret_from_sys_call
+
+/*
+ * Emulated IA32 system calls via int 0x80.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  arg6	(note: not saved in the stack frame, should not be touched)
+ *
+ * Notes:
+ * Uses the same stack frame as the x86-64 version.
+ * All registers except eax must be saved (but ptrace may violate that).
+ * Arguments are zero extended. For system calls that want sign extension and
+ * take long arguments a wrapper is needed. Most calls can just be called
+ * directly.
+ * Assumes it is only called from user space and entered with interrupts off.
+ */
+
+ENTRY(entry_INT80_compat)
+	/*
+	 * Interrupts are off on entry.
+	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+	 * it is too small to ever cause noticeable irq latency.
+	 */
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	SWAPGS
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
+	/* Zero-extending 32-bit regs, do not remove */
+	movl	%eax, %eax
+
+	/* Construct struct pt_regs on stack (iret frame is already on stack) */
+	pushq	%rax			/* pt_regs->orig_ax */
+	pushq	%rdi			/* pt_regs->di */
+	pushq	%rsi			/* pt_regs->si */
+	pushq	%rdx			/* pt_regs->dx */
+	pushq	%rcx			/* pt_regs->cx */
+	pushq	$-ENOSYS		/* pt_regs->ax */
+	pushq	$0			/* pt_regs->r8 */
+	pushq	$0			/* pt_regs->r9 */
+	pushq	$0			/* pt_regs->r10 */
+	pushq	$0			/* pt_regs->r11 */
+	cld
+	sub	$(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
+
+	orl	$TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
+	testl	$_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	ia32_tracesys
+
+ia32_do_call:
+	/* 32-bit syscall -> 64-bit C ABI argument conversion */
+	movl	%edi, %r8d		/* arg5 */
+	movl	%ebp, %r9d		/* arg6 */
+	xchg	%ecx, %esi		/* rsi:arg2, rcx:arg4 */
+	movl	%ebx, %edi		/* arg1 */
+	movl	%edx, %edx		/* arg3 (zero extension) */
+	cmpq	$(IA32_NR_syscalls-1), %rax
+	ja	1f
+
+	call	*ia32_sys_call_table(, %rax, 8) /* RIP relative */
+
+ia32_sysret:
+	movq	%rax, RAX(%rsp)
+1:
+	jmp	int_ret_from_sys_call
+
+ia32_tracesys:
+	SAVE_EXTRA_REGS
+	movq	%rsp, %rdi			/* &pt_regs -> arg1 */
+	call	syscall_trace_enter
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * Don't reload %eax because syscall_trace_enter() returned
+	 * the %rax value we should see.  But do truncate it to 32 bits.
+	 * If it's -1 to make us punt the syscall, then (u32)-1 is still
+	 * an appropriately invalid value.
+	 */
+	movl	RCX(%rsp), %ecx
+	movl	RDX(%rsp), %edx
+	movl	RSI(%rsp), %esi
+	movl	RDI(%rsp), %edi
+	movl	%eax, %eax		/* zero extension */
+	RESTORE_EXTRA_REGS
+	jmp	ia32_do_call
+END(entry_INT80_compat)
+
+	.macro PTREGSCALL label, func
+	ALIGN
+GLOBAL(\label)
+	leaq	\func(%rip), %rax
+	jmp	ia32_ptregs_common
+	.endm
+
+	PTREGSCALL stub32_rt_sigreturn,	sys32_rt_sigreturn
+	PTREGSCALL stub32_sigreturn,	sys32_sigreturn
+	PTREGSCALL stub32_fork,		sys_fork
+	PTREGSCALL stub32_vfork,	sys_vfork
+
+	ALIGN
+GLOBAL(stub32_clone)
+	leaq	sys_clone(%rip), %rax
+	/*
+	 * The 32-bit clone ABI is: clone(..., int tls_val, int *child_tidptr).
+	 * The 64-bit clone ABI is: clone(..., int *child_tidptr, int tls_val).
+	 *
+	 * The native 64-bit kernel's sys_clone() implements the latter,
+	 * so we need to swap arguments here before calling it:
+	 */
+	xchg	%r8, %rcx
+	jmp	ia32_ptregs_common
+
+	ALIGN
+ia32_ptregs_common:
+	SAVE_EXTRA_REGS 8
+	call	*%rax
+	RESTORE_EXTRA_REGS 8
+	ret
+END(ia32_ptregs_common)
diff --git a/arch/x86/kernel/syscall_32.c b/arch/x86/entry/syscall_32.c
index 3777189c4a19..e398d033673f 100644
--- a/arch/x86/kernel/syscall_32.c
+++ b/arch/x86/entry/syscall_32.c
@@ -10,7 +10,7 @@
 #else
 #define SYM(sym, compat) sym
 #define ia32_sys_call_table sys_call_table
-#define __NR_ia32_syscall_max __NR_syscall_max
+#define __NR_entry_INT80_compat_max __NR_syscall_max
 #endif
 
 #define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
@@ -23,11 +23,11 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
 
 extern asmlinkage void sys_ni_syscall(void);
 
-__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
+__visible const sys_call_ptr_t ia32_sys_call_table[__NR_entry_INT80_compat_max+1] = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
+	[0 ... __NR_entry_INT80_compat_max] = &sys_ni_syscall,
 #include <asm/syscalls_32.h>
 };
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/entry/syscall_64.c
index 4ac730b37f0b..4ac730b37f0b 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/entry/syscall_64.c
diff --git a/arch/x86/syscalls/Makefile b/arch/x86/entry/syscalls/Makefile
index a55abb9f6c5e..57aa59fd140c 100644
--- a/arch/x86/syscalls/Makefile
+++ b/arch/x86/entry/syscalls/Makefile
@@ -1,5 +1,5 @@
-out := $(obj)/../include/generated/asm
-uapi := $(obj)/../include/generated/uapi/asm
+out := $(obj)/../../include/generated/asm
+uapi := $(obj)/../../include/generated/uapi/asm
 
 # Create output directory if not already present
 _dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index ef8187f9d28d..ef8187f9d28d 100644
--- a/arch/x86/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 9ef32d5f1b19..9ef32d5f1b19 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
diff --git a/arch/x86/syscalls/syscallhdr.sh b/arch/x86/entry/syscalls/syscallhdr.sh
index 31fd5f1f38f7..31fd5f1f38f7 100644
--- a/arch/x86/syscalls/syscallhdr.sh
+++ b/arch/x86/entry/syscalls/syscallhdr.sh
diff --git a/arch/x86/syscalls/syscalltbl.sh b/arch/x86/entry/syscalls/syscalltbl.sh
index 0e7f8ec071e7..0e7f8ec071e7 100644
--- a/arch/x86/syscalls/syscalltbl.sh
+++ b/arch/x86/entry/syscalls/syscalltbl.sh
diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/entry/thunk_32.S
index 5eb715087b80..e9acf5f4fc92 100644
--- a/arch/x86/lib/thunk_32.S
+++ b/arch/x86/entry/thunk_32.S
@@ -6,16 +6,14 @@
  */
 	#include <linux/linkage.h>
 	#include <asm/asm.h>
-	#include <asm/dwarf2.h>
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
 	.globl \name
 \name:
-	CFI_STARTPROC
-	pushl_cfi_reg eax
-	pushl_cfi_reg ecx
-	pushl_cfi_reg edx
+	pushl %eax
+	pushl %ecx
+	pushl %edx
 
 	.if \put_ret_addr_in_eax
 	/* Place EIP in the arg1 */
@@ -23,11 +21,10 @@
 	.endif
 
 	call \func
-	popl_cfi_reg edx
-	popl_cfi_reg ecx
-	popl_cfi_reg eax
+	popl %edx
+	popl %ecx
+	popl %eax
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/entry/thunk_64.S
index f89ba4e93025..3e95681b4e2d 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/entry/thunk_64.S
@@ -6,35 +6,32 @@
  * Subject to the GNU public license, v.2. No warranty of any kind.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
+#include "calling.h"
 #include <asm/asm.h>
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
 	.globl \name
 \name:
-	CFI_STARTPROC
 
 	/* this one pushes 9 elems, the next one would be %rIP */
-	pushq_cfi_reg rdi
-	pushq_cfi_reg rsi
-	pushq_cfi_reg rdx
-	pushq_cfi_reg rcx
-	pushq_cfi_reg rax
-	pushq_cfi_reg r8
-	pushq_cfi_reg r9
-	pushq_cfi_reg r10
-	pushq_cfi_reg r11
+	pushq %rdi
+	pushq %rsi
+	pushq %rdx
+	pushq %rcx
+	pushq %rax
+	pushq %r8
+	pushq %r9
+	pushq %r10
+	pushq %r11
 
 	.if \put_ret_addr_in_rdi
 	/* 9*8(%rsp) is return addr on stack */
-	movq_cfi_restore 9*8, rdi
+	movq 9*8(%rsp), %rdi
 	.endif
 
 	call \func
 	jmp  restore
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -57,19 +54,16 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPT)
-	CFI_STARTPROC
-	CFI_ADJUST_CFA_OFFSET 9*8
 restore:
-	popq_cfi_reg r11
-	popq_cfi_reg r10
-	popq_cfi_reg r9
-	popq_cfi_reg r8
-	popq_cfi_reg rax
-	popq_cfi_reg rcx
-	popq_cfi_reg rdx
-	popq_cfi_reg rsi
-	popq_cfi_reg rdi
+	popq %r11
+	popq %r10
+	popq %r9
+	popq %r8
+	popq %rax
+	popq %rcx
+	popq %rdx
+	popq %rsi
+	popq %rdi
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(restore)
 #endif
diff --git a/arch/x86/vdso/.gitignore b/arch/x86/entry/vdso/.gitignore
index aae8ffdd5880..aae8ffdd5880 100644
--- a/arch/x86/vdso/.gitignore
+++ b/arch/x86/entry/vdso/.gitignore
diff --git a/arch/x86/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index e97032069f88..e97032069f88 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
diff --git a/arch/x86/vdso/checkundef.sh b/arch/x86/entry/vdso/checkundef.sh
index 7ee90a9b549d..7ee90a9b549d 100755
--- a/arch/x86/vdso/checkundef.sh
+++ b/arch/x86/entry/vdso/checkundef.sh
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
index 9793322751e0..9793322751e0 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vclock_gettime.c
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/entry/vdso/vdso-layout.lds.S
index de2c921025f5..de2c921025f5 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/entry/vdso/vdso-layout.lds.S
diff --git a/arch/x86/vdso/vdso-note.S b/arch/x86/entry/vdso/vdso-note.S
index 79a071e4357e..79a071e4357e 100644
--- a/arch/x86/vdso/vdso-note.S
+++ b/arch/x86/entry/vdso/vdso-note.S
diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/entry/vdso/vdso.lds.S
index 6807932643c2..6807932643c2 100644
--- a/arch/x86/vdso/vdso.lds.S
+++ b/arch/x86/entry/vdso/vdso.lds.S
diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/entry/vdso/vdso2c.c
index 8627db24a7f6..8627db24a7f6 100644
--- a/arch/x86/vdso/vdso2c.c
+++ b/arch/x86/entry/vdso/vdso2c.c
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index 0224987556ce..0224987556ce 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c
index e904c270573b..e904c270573b 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/entry/vdso/vdso32-setup.c
diff --git a/arch/x86/vdso/vdso32/.gitignore b/arch/x86/entry/vdso/vdso32/.gitignore
index e45fba9d0ced..e45fba9d0ced 100644
--- a/arch/x86/vdso/vdso32/.gitignore
+++ b/arch/x86/entry/vdso/vdso32/.gitignore
diff --git a/arch/x86/vdso/vdso32/int80.S b/arch/x86/entry/vdso/vdso32/int80.S
index b15b7c01aedb..b15b7c01aedb 100644
--- a/arch/x86/vdso/vdso32/int80.S
+++ b/arch/x86/entry/vdso/vdso32/int80.S
diff --git a/arch/x86/vdso/vdso32/note.S b/arch/x86/entry/vdso/vdso32/note.S
index c83f25734696..c83f25734696 100644
--- a/arch/x86/vdso/vdso32/note.S
+++ b/arch/x86/entry/vdso/vdso32/note.S
diff --git a/arch/x86/vdso/vdso32/sigreturn.S b/arch/x86/entry/vdso/vdso32/sigreturn.S
index d7ec4e251c0a..d7ec4e251c0a 100644
--- a/arch/x86/vdso/vdso32/sigreturn.S
+++ b/arch/x86/entry/vdso/vdso32/sigreturn.S
diff --git a/arch/x86/vdso/vdso32/syscall.S b/arch/x86/entry/vdso/vdso32/syscall.S
index 6b286bb5251c..6b286bb5251c 100644
--- a/arch/x86/vdso/vdso32/syscall.S
+++ b/arch/x86/entry/vdso/vdso32/syscall.S
diff --git a/arch/x86/vdso/vdso32/sysenter.S b/arch/x86/entry/vdso/vdso32/sysenter.S
index e354bceee0e0..e354bceee0e0 100644
--- a/arch/x86/vdso/vdso32/sysenter.S
+++ b/arch/x86/entry/vdso/vdso32/sysenter.S
diff --git a/arch/x86/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
index 175cc72c0f68..175cc72c0f68 100644
--- a/arch/x86/vdso/vdso32/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c
diff --git a/arch/x86/vdso/vdso32/vdso-fakesections.c b/arch/x86/entry/vdso/vdso32/vdso-fakesections.c
index 541468e25265..541468e25265 100644
--- a/arch/x86/vdso/vdso32/vdso-fakesections.c
+++ b/arch/x86/entry/vdso/vdso32/vdso-fakesections.c
diff --git a/arch/x86/vdso/vdso32/vdso32.lds.S b/arch/x86/entry/vdso/vdso32/vdso32.lds.S
index 31056cf294bf..31056cf294bf 100644
--- a/arch/x86/vdso/vdso32/vdso32.lds.S
+++ b/arch/x86/entry/vdso/vdso32/vdso32.lds.S
diff --git a/arch/x86/vdso/vdsox32.lds.S b/arch/x86/entry/vdso/vdsox32.lds.S
index 697c11ece90c..697c11ece90c 100644
--- a/arch/x86/vdso/vdsox32.lds.S
+++ b/arch/x86/entry/vdso/vdsox32.lds.S
diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/entry/vdso/vgetcpu.c
index 8ec3d1f4ce9a..8ec3d1f4ce9a 100644
--- a/arch/x86/vdso/vgetcpu.c
+++ b/arch/x86/entry/vdso/vgetcpu.c
diff --git a/arch/x86/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index 1c9f750c3859..1c9f750c3859 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
diff --git a/arch/x86/entry/vsyscall/Makefile b/arch/x86/entry/vsyscall/Makefile
new file mode 100644
index 000000000000..a9f4856f622a
--- /dev/null
+++ b/arch/x86/entry/vsyscall/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the x86 low level vsyscall code
+#
+obj-y					:= vsyscall_gtod.o
+
+obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
+
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
index 2dcc6ff6fdcc..2dcc6ff6fdcc 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/entry/vsyscall/vsyscall_emu_64.S
index c9596a9af159..c9596a9af159 100644
--- a/arch/x86/kernel/vsyscall_emu_64.S
+++ b/arch/x86/entry/vsyscall/vsyscall_emu_64.S
diff --git a/arch/x86/kernel/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c
index 51e330416995..51e330416995 100644
--- a/arch/x86/kernel/vsyscall_gtod.c
+++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c
diff --git a/arch/x86/kernel/vsyscall_trace.h b/arch/x86/entry/vsyscall/vsyscall_trace.h
index a8b2edec54fe..9dd7359a38a8 100644
--- a/arch/x86/kernel/vsyscall_trace.h
+++ b/arch/x86/entry/vsyscall/vsyscall_trace.h
@@ -24,6 +24,6 @@ TRACE_EVENT(emulate_vsyscall,
 #endif
 
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
+#define TRACE_INCLUDE_PATH ../../arch/x86/entry/vsyscall/
 #define TRACE_INCLUDE_FILE vsyscall_trace
 #include <trace/define_trace.h>
diff --git a/arch/x86/ia32/Makefile b/arch/x86/ia32/Makefile
index bb635c641869..cd4339bae066 100644
--- a/arch/x86/ia32/Makefile
+++ b/arch/x86/ia32/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
deleted file mode 100644
index 63450a596800..000000000000
--- a/arch/x86/ia32/ia32entry.S
+++ /dev/null
@@ -1,591 +0,0 @@
-/*
- * Compatibility mode system call entry point for x86-64. 
- * 		
- * Copyright 2000-2002 Andi Kleen, SuSE Labs.
- */		 
-
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/current.h>
-#include <asm/errno.h>
-#include <asm/ia32_unistd.h>	
-#include <asm/thread_info.h>	
-#include <asm/segment.h>
-#include <asm/irqflags.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-#include <linux/linkage.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE	   0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit ia32_ret_from_sys_call
-#define sysretl_audit ia32_ret_from_sys_call
-#endif
-
-	.section .entry.text, "ax"
-
-	/* clobbers %rax */
-	.macro  CLEAR_RREGS _r9=rax
-	xorl 	%eax,%eax
-	movq	%rax,R11(%rsp)
-	movq	%rax,R10(%rsp)
-	movq	%\_r9,R9(%rsp)
-	movq	%rax,R8(%rsp)
-	.endm
-
-	/*
-	 * Reload arg registers from stack in case ptrace changed them.
-	 * We don't reload %eax because syscall_trace_enter() returned
-	 * the %rax value we should see.  Instead, we just truncate that
-	 * value to 32 bits again as we did on entry from user mode.
-	 * If it's a new value set by user_regset during entry tracing,
-	 * this matches the normal truncation of the user-mode value.
-	 * If it's -1 to make us punt the syscall, then (u32)-1 is still
-	 * an appropriately invalid value.
-	 */
-	.macro LOAD_ARGS32 _r9=0
-	.if \_r9
-	movl R9(%rsp),%r9d
-	.endif
-	movl RCX(%rsp),%ecx
-	movl RDX(%rsp),%edx
-	movl RSI(%rsp),%esi
-	movl RDI(%rsp),%edi
-	movl %eax,%eax			/* zero extension */
-	.endm
-	
-	.macro CFI_STARTPROC32 simple
-	CFI_STARTPROC	\simple
-	CFI_UNDEFINED	r8
-	CFI_UNDEFINED	r9
-	CFI_UNDEFINED	r10
-	CFI_UNDEFINED	r11
-	CFI_UNDEFINED	r12
-	CFI_UNDEFINED	r13
-	CFI_UNDEFINED	r14
-	CFI_UNDEFINED	r15
-	.endm
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret32)
-	swapgs
-	sysretl
-ENDPROC(native_usergs_sysret32)
-#endif
-
-/*
- * 32bit SYSENTER instruction entry.
- *
- * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
- * IF and VM in rflags are cleared (IOW: interrupts are off).
- * SYSENTER does not save anything on the stack,
- * and does not save old rip (!!!) and rflags.
- *
- * Arguments:
- * eax  system call number
- * ebx  arg1
- * ecx  arg2
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * ebp  user stack
- * 0(%ebp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_sysenter_target)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rsp,rbp
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%ebp, %ebp
-	movl	%eax, %eax
-
-	movl	ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
-	CFI_REGISTER rip,r10
-
-	/* Construct struct pt_regs on stack */
-	pushq_cfi	$__USER32_DS		/* pt_regs->ss */
-	pushq_cfi	%rbp			/* pt_regs->sp */
-	CFI_REL_OFFSET	rsp,0
-	pushfq_cfi				/* pt_regs->flags */
-	pushq_cfi	$__USER32_CS		/* pt_regs->cs */
-	pushq_cfi	%r10 /* pt_regs->ip = thread_info->sysenter_return */
-	CFI_REL_OFFSET	rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi	$-ENOSYS		/* pt_regs->ax */
-	cld
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	/*
-	 * no need to do an access_ok check here because rbp has been
-	 * 32bit zero extended
-	 */
-	ASM_STAC
-1:	movl	(%rbp),%ebp
-	_ASM_EXTABLE(1b,ia32_badarg)
-	ASM_CLAC
-
-	/*
-	 * Sysenter doesn't filter flags, so we need to clear NT
-	 * ourselves.  To save a few cycles, we can check whether
-	 * NT was set instead of doing an unconditional popfq.
-	 */
-	testl $X86_EFLAGS_NT,EFLAGS(%rsp)
-	jnz sysenter_fix_flags
-sysenter_flags_fixed:
-
-	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	CFI_REMEMBER_STATE
-	jnz  sysenter_tracesys
-sysenter_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl	%edi,%r8d	/* arg5 */
-	movl	%ebp,%r9d	/* arg6 */
-	xchg	%ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl	%ebx,%edi	/* arg1 */
-	movl	%edx,%edx	/* arg3 (zero extension) */
-sysenter_dispatch:
-	cmpq	$(IA32_NR_syscalls-1),%rax
-	ja	1f
-	call	*ia32_sys_call_table(,%rax,8)
-	movq	%rax,RAX(%rsp)
-1:
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz	sysexit_audit
-sysexit_from_sys_call:
-	/*
-	 * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
-	 * NMI between STI and SYSEXIT has poorly specified behavior,
-	 * and and NMI followed by an IRQ with usergs is fatal.  So
-	 * we just pretend we're using SYSEXIT but we really use
-	 * SYSRETL instead.
-	 *
-	 * This code path is still called 'sysexit' because it pairs
-	 * with 'sysenter' and it uses the SYSENTER calling convention.
-	 */
-	andl    $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	movl	RIP(%rsp),%ecx		/* User %eip */
-	CFI_REGISTER rip,rcx
-	RESTORE_RSI_RDI
-	xorl	%edx,%edx		/* avoid info leaks */
-	xorq	%r8,%r8
-	xorq	%r9,%r9
-	xorq	%r10,%r10
-	movl	EFLAGS(%rsp),%r11d	/* User eflags */
-	/*CFI_RESTORE rflags*/
-	TRACE_IRQS_ON
-
-	/*
-	 * SYSRETL works even on Intel CPUs.  Use it in preference to SYSEXIT,
-	 * since it avoids a dicey window with interrupts enabled.
-	 */
-	movl	RSP(%rsp),%esp
-
-	/*
-	 * USERGS_SYSRET32 does:
-	 *  gsbase = user's gs base
-	 *  eip = ecx
-	 *  rflags = r11
-	 *  cs = __USER32_CS
-	 *  ss = __USER_DS
-	 *
-	 * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
-	 *
-	 *  pop %ebp
-	 *  pop %edx
-	 *  pop %ecx
-	 *
-	 * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
-	 * avoid info leaks.  R11 ends up with VDSO32_SYSENTER_RETURN's
-	 * address (already known to user code), and R12-R15 are
-	 * callee-saved and therefore don't contain any interesting
-	 * kernel data.
-	 */
-	USERGS_SYSRET32
-
-	CFI_RESTORE_STATE
-
-#ifdef CONFIG_AUDITSYSCALL
-	.macro auditsys_entry_common
-	movl %esi,%r8d			/* 5th arg: 4th syscall arg */
-	movl %ecx,%r9d			/*swap with edx*/
-	movl %edx,%ecx			/* 4th arg: 3rd syscall arg */
-	movl %r9d,%edx			/* 3rd arg: 2nd syscall arg */
-	movl %ebx,%esi			/* 2nd arg: 1st syscall arg */
-	movl %eax,%edi			/* 1st arg: syscall number */
-	call __audit_syscall_entry
-	movl ORIG_RAX(%rsp),%eax	/* reload syscall number */
-	movl %ebx,%edi			/* reload 1st syscall arg */
-	movl RCX(%rsp),%esi	/* reload 2nd syscall arg */
-	movl RDX(%rsp),%edx	/* reload 3rd syscall arg */
-	movl RSI(%rsp),%ecx	/* reload 4th syscall arg */
-	movl RDI(%rsp),%r8d	/* reload 5th syscall arg */
-	.endm
-
-	.macro auditsys_exit exit
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz ia32_ret_from_sys_call
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	movl %eax,%esi		/* second arg, syscall return value */
-	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
-	jbe 1f
-	movslq %eax, %rsi	/* if error sign extend to 64 bits */
-1:	setbe %al		/* 1 if error, 0 if not */
-	movzbl %al,%edi		/* zero-extend that into %edi */
-	call __audit_syscall_exit
-	movq RAX(%rsp),%rax	/* reload syscall return value */
-	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz \exit
-	CLEAR_RREGS
-	jmp int_with_check
-	.endm
-
-sysenter_auditsys:
-	auditsys_entry_common
-	movl %ebp,%r9d			/* reload 6th syscall arg */
-	jmp sysenter_dispatch
-
-sysexit_audit:
-	auditsys_exit sysexit_from_sys_call
-#endif
-
-sysenter_fix_flags:
-	pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
-	popfq_cfi
-	jmp sysenter_flags_fixed
-
-sysenter_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
-	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz	sysenter_auditsys
-#endif
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS
-	movq	%rsp,%rdi        /* &pt_regs -> arg1 */
-	call	syscall_trace_enter
-	LOAD_ARGS32  /* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	jmp	sysenter_do_call
-	CFI_ENDPROC
-ENDPROC(ia32_sysenter_target)
-
-/*
- * 32bit SYSCALL instruction entry.
- *
- * 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Note: rflags saving+masking-with-MSR happens only in Long mode
- * (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it).
- * Don't get confused: rflags saving+masking depends on Long Mode Active bit
- * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
- * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
- *
- * Arguments:
- * eax  system call number
- * ecx  return address
- * ebx  arg1
- * ebp  arg2	(note: not saved in the stack frame, should not be touched)
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * esp  user stack
- * 0(%esp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_cstar_target)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rip,rcx
-	/*CFI_REGISTER	rflags,r11*/
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	movl	%esp,%r8d
-	CFI_REGISTER	rsp,r8
-	movq	PER_CPU_VAR(cpu_current_top_of_stack),%rsp
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%eax,%eax
-
-	/* Construct struct pt_regs on stack */
-	pushq_cfi	$__USER32_DS		/* pt_regs->ss */
-	pushq_cfi	%r8			/* pt_regs->sp */
-	CFI_REL_OFFSET rsp,0
-	pushq_cfi	%r11			/* pt_regs->flags */
-	pushq_cfi	$__USER32_CS		/* pt_regs->cs */
-	pushq_cfi	%rcx			/* pt_regs->ip */
-	CFI_REL_OFFSET rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rbp			/* pt_regs->cx */
-	movl	%ebp,%ecx
-	pushq_cfi	$-ENOSYS		/* pt_regs->ax */
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	/*
-	 * no need to do an access_ok check here because r8 has been
-	 * 32bit zero extended
-	 */
-	ASM_STAC
-1:	movl	(%r8),%r9d
-	_ASM_EXTABLE(1b,ia32_badarg)
-	ASM_CLAC
-	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	CFI_REMEMBER_STATE
-	jnz   cstar_tracesys
-cstar_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl	%edi,%r8d	/* arg5 */
-	/* r9 already loaded */	/* arg6 */
-	xchg	%ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl	%ebx,%edi	/* arg1 */
-	movl	%edx,%edx	/* arg3 (zero extension) */
-cstar_dispatch:
-	cmpq	$(IA32_NR_syscalls-1),%rax
-	ja	1f
-	call *ia32_sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-1:
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz sysretl_audit
-sysretl_from_sys_call:
-	andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	RESTORE_RSI_RDI_RDX
-	movl RIP(%rsp),%ecx
-	CFI_REGISTER rip,rcx
-	movl EFLAGS(%rsp),%r11d
-	/*CFI_REGISTER rflags,r11*/
-	xorq	%r10,%r10
-	xorq	%r9,%r9
-	xorq	%r8,%r8
-	TRACE_IRQS_ON
-	movl RSP(%rsp),%esp
-	CFI_RESTORE rsp
-	/*
-	 * 64bit->32bit SYSRET restores eip from ecx,
-	 * eflags from r11 (but RF and VM bits are forced to 0),
-	 * cs and ss are loaded from MSRs.
-	 * (Note: 32bit->32bit SYSRET is different: since r11
-	 * does not exist, it merely sets eflags.IF=1).
-	 *
-	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
-	 * descriptor is not reinitialized.  This means that we must
-	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
-	 * exit the kernel, and re-enter using an interrupt vector.  (All
-	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
-	 * from happening by reloading SS in __switch_to.
-	 */
-	USERGS_SYSRET32
-
-#ifdef CONFIG_AUDITSYSCALL
-cstar_auditsys:
-	CFI_RESTORE_STATE
-	movl %r9d,R9(%rsp)	/* register to be clobbered by call */
-	auditsys_entry_common
-	movl R9(%rsp),%r9d	/* reload 6th syscall arg */
-	jmp cstar_dispatch
-
-sysretl_audit:
-	auditsys_exit sysretl_from_sys_call
-#endif
-
-cstar_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz cstar_auditsys
-#endif
-	xchgl %r9d,%ebp
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS r9
-	movq %rsp,%rdi        /* &pt_regs -> arg1 */
-	call syscall_trace_enter
-	LOAD_ARGS32 1	/* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	xchgl %ebp,%r9d
-	jmp cstar_do_call
-END(ia32_cstar_target)
-				
-ia32_badarg:
-	ASM_CLAC
-	movq $-EFAULT,%rax
-	jmp ia32_sysret
-	CFI_ENDPROC
-
-/*
- * Emulated IA32 system calls via int 0x80.
- *
- * Arguments:
- * eax  system call number
- * ebx  arg1
- * ecx  arg2
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * ebp  arg6	(note: not saved in the stack frame, should not be touched)
- *
- * Notes:
- * Uses the same stack frame as the x86-64 version.
- * All registers except eax must be saved (but ptrace may violate that).
- * Arguments are zero extended. For system calls that want sign extension and
- * take long arguments a wrapper is needed. Most calls can just be called
- * directly.
- * Assumes it is only called from user space and entered with interrupts off.
- */
-
-ENTRY(ia32_syscall)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,5*8
-	/*CFI_REL_OFFSET	ss,4*8 */
-	CFI_REL_OFFSET	rsp,3*8
-	/*CFI_REL_OFFSET	rflags,2*8 */
-	/*CFI_REL_OFFSET	cs,1*8 */
-	CFI_REL_OFFSET	rip,0*8
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	SWAPGS
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%eax,%eax
-
-	/* Construct struct pt_regs on stack (iret frame is already on stack) */
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi	$-ENOSYS		/* pt_regs->ax */
-	cld
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz ia32_tracesys
-ia32_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl %edi,%r8d	/* arg5 */
-	movl %ebp,%r9d	/* arg6 */
-	xchg %ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl %ebx,%edi	/* arg1 */
-	movl %edx,%edx	/* arg3 (zero extension) */
-	cmpq	$(IA32_NR_syscalls-1),%rax
-	ja	1f
-	call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
-ia32_sysret:
-	movq %rax,RAX(%rsp)
-1:
-ia32_ret_from_sys_call:
-	CLEAR_RREGS
-	jmp int_ret_from_sys_call
-
-ia32_tracesys:
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS
-	movq %rsp,%rdi        /* &pt_regs -> arg1 */
-	call syscall_trace_enter
-	LOAD_ARGS32	/* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	jmp ia32_do_call
-	CFI_ENDPROC
-END(ia32_syscall)
-
-	.macro PTREGSCALL label, func
-	ALIGN
-GLOBAL(\label)
-	leaq \func(%rip),%rax
-	jmp  ia32_ptregs_common	
-	.endm
-
-	CFI_STARTPROC32
-
-	PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
-	PTREGSCALL stub32_sigreturn, sys32_sigreturn
-	PTREGSCALL stub32_fork, sys_fork
-	PTREGSCALL stub32_vfork, sys_vfork
-
-	ALIGN
-GLOBAL(stub32_clone)
-	leaq sys_clone(%rip),%rax
-	mov	%r8, %rcx
-	jmp  ia32_ptregs_common	
-
-	ALIGN
-ia32_ptregs_common:
-	CFI_ENDPROC
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,SIZEOF_PTREGS
-	CFI_REL_OFFSET	rax,RAX
-	CFI_REL_OFFSET	rcx,RCX
-	CFI_REL_OFFSET	rdx,RDX
-	CFI_REL_OFFSET	rsi,RSI
-	CFI_REL_OFFSET	rdi,RDI
-	CFI_REL_OFFSET	rip,RIP
-/*	CFI_REL_OFFSET	cs,CS*/
-/*	CFI_REL_OFFSET	rflags,EFLAGS*/
-	CFI_REL_OFFSET	rsp,RSP
-/*	CFI_REL_OFFSET	ss,SS*/
-	SAVE_EXTRA_REGS 8
-	call *%rax
-	RESTORE_EXTRA_REGS 8
-	ret
-	CFI_ENDPROC
-END(ia32_ptregs_common)
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
deleted file mode 100644
index de1cdaf4d743..000000000000
--- a/arch/x86/include/asm/dwarf2.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef _ASM_X86_DWARF2_H
-#define _ASM_X86_DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC		.cfi_startproc
-#define CFI_ENDPROC		.cfi_endproc
-#define CFI_DEF_CFA		.cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
-#define CFI_OFFSET		.cfi_offset
-#define CFI_REL_OFFSET		.cfi_rel_offset
-#define CFI_REGISTER		.cfi_register
-#define CFI_RESTORE		.cfi_restore
-#define CFI_REMEMBER_STATE	.cfi_remember_state
-#define CFI_RESTORE_STATE	.cfi_restore_state
-#define CFI_UNDEFINED		.cfi_undefined
-#define CFI_ESCAPE		.cfi_escape
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME	.cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
-	/*
-	 * Emit CFI data in .debug_frame sections, not .eh_frame sections.
-	 * The latter we currently just discard since we don't do DWARF
-	 * unwinding at runtime.  So only the offline DWARF information is
-	 * useful to anyone.  Note we should not use this directive if this
-	 * file is used in the vDSO assembly, or if vmlinux.lds.S gets
-	 * changed so it doesn't discard .eh_frame.
-	 */
-	.cfi_sections .debug_frame
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC		cfi_ignore
-#define CFI_ENDPROC		cfi_ignore
-#define CFI_DEF_CFA		cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET		cfi_ignore
-#define CFI_REL_OFFSET		cfi_ignore
-#define CFI_REGISTER		cfi_ignore
-#define CFI_RESTORE		cfi_ignore
-#define CFI_REMEMBER_STATE	cfi_ignore
-#define CFI_RESTORE_STATE	cfi_ignore
-#define CFI_UNDEFINED		cfi_ignore
-#define CFI_ESCAPE		cfi_ignore
-#define CFI_SIGNAL_FRAME	cfi_ignore
-
-#endif
-
-/*
- * An attempt to make CFI annotations more or less
- * correct and shorter. It is implied that you know
- * what you're doing if you use them.
- */
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_X86_64
-	.macro pushq_cfi reg
-	pushq \reg
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro pushq_cfi_reg reg
-	pushq %\reg
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popq_cfi reg
-	popq \reg
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro popq_cfi_reg reg
-	popq %\reg
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfq_cfi
-	pushfq
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro popfq_cfi
-	popfq
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro movq_cfi reg offset=0
-	movq %\reg, \offset(%rsp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movq_cfi_restore offset reg
-	movq \offset(%rsp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#else /*!CONFIG_X86_64*/
-	.macro pushl_cfi reg
-	pushl \reg
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro pushl_cfi_reg reg
-	pushl %\reg
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popl_cfi reg
-	popl \reg
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro popl_cfi_reg reg
-	popl %\reg
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfl_cfi
-	pushfl
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro popfl_cfi
-	popfl
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro movl_cfi reg offset=0
-	movl %\reg, \offset(%esp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movl_cfi_restore offset reg
-	movl \offset(%esp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#endif /*!CONFIG_X86_64*/
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h
index 3b629f47eb65..793179cf8e21 100644
--- a/arch/x86/include/asm/frame.h
+++ b/arch/x86/include/asm/frame.h
@@ -1,20 +1,17 @@
 #ifdef __ASSEMBLY__
 
 #include <asm/asm.h>
-#include <asm/dwarf2.h>
 
 /* The annotation hides the frame from the unwinder and makes it look
    like a ordinary ebp save/restore. This avoids some special cases for
    frame pointer later */
 #ifdef CONFIG_FRAME_POINTER
 	.macro FRAME
-	__ASM_SIZE(push,_cfi)	%__ASM_REG(bp)
-	CFI_REL_OFFSET		__ASM_REG(bp), 0
+	__ASM_SIZE(push,)	%__ASM_REG(bp)
 	__ASM_SIZE(mov)		%__ASM_REG(sp), %__ASM_REG(bp)
 	.endm
 	.macro ENDFRAME
-	__ASM_SIZE(pop,_cfi)	%__ASM_REG(bp)
-	CFI_RESTORE		__ASM_REG(bp)
+	__ASM_SIZE(pop,)	%__ASM_REG(bp)
 	.endm
 #else
 	.macro FRAME
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 441ecf83d81a..e6a707eb5081 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -206,8 +206,13 @@ do {                                                            \
 
 #endif	/* !CONFIG_PARAVIRT */
 
-#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val),		\
-					     (u32)((val) >> 32))
+/*
+ * 64-bit version of wrmsr_safe():
+ */
+static inline int wrmsrl_safe(u32 msr, u64 val)
+{
+	return wrmsr_safe(msr, (u32)val,  (u32)(val >> 32));
+}
 
 #define write_tsc(low, high) wrmsr(MSR_IA32_TSC, (low), (high))
 
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index a90f8972dad5..a4a77286cb1d 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -5,12 +5,14 @@
 
 /* misc architecture specific prototypes */
 
-void system_call(void);
 void syscall_init(void);
 
-void ia32_syscall(void);
-void ia32_cstar_target(void);
-void ia32_sysenter_target(void);
+void entry_SYSCALL_64(void);
+void entry_SYSCALL_compat(void);
+void entry_INT80_32(void);
+void entry_INT80_compat(void);
+void entry_SYSENTER_32(void);
+void entry_SYSENTER_compat(void);
 
 void x86_configure_nx(void);
 void x86_report_nx(void);
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 5a9856eb12ba..7d5a1929d76b 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -231,11 +231,21 @@
 #define TLS_SIZE			(GDT_ENTRY_TLS_ENTRIES* 8)
 
 #ifdef __KERNEL__
+
+/*
+ * early_idt_handler_array is an array of entry points referenced in the
+ * early IDT.  For simplicity, it's a real array with one entry point
+ * every nine bytes.  That leaves room for an optional 'push $0' if the
+ * vector has no error code (two bytes), a 'push $vector_number' (two
+ * bytes), and a jump to the common entry code (up to five bytes).
+ */
+#define EARLY_IDT_HANDLER_SIZE 9
+
 #ifndef __ASSEMBLY__
 
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
+extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
 #ifdef CONFIG_TRACING
-# define trace_early_idt_handlers early_idt_handlers
+# define trace_early_idt_handler_array early_idt_handler_array
 #endif
 
 /*
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9bcd0b56ca17..01663ee5f1b7 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n
 
 CFLAGS_irq.o := -I$(src)/../include/asm/trace
 
-obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
+obj-y			:= process_$(BITS).o signal.o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o ldt.o dumpstack.o nmi.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o jump_label.o
@@ -31,9 +31,6 @@ obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= mcount_64.o
-obj-y			+= syscall_$(BITS).o vsyscall_gtod.o
-obj-$(CONFIG_IA32_EMULATION)	+= syscall_32.o
-obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
 obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index dcaab87da629..599afcf0005f 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -66,7 +66,7 @@ int main(void)
 	DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
 	DEFINE(NR_syscalls, sizeof(syscalls_64));
 
-	DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1);
+	DEFINE(__NR_entry_INT80_compat_max, sizeof(syscalls_ia32) - 1);
 	DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32));
 
 	return 0;
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b6fe2e47f7f1..cc7f753e571d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1026,7 +1026,7 @@ void enable_sep_cpu(void)
 	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
 	      0);
 
-	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0);
+	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
 
 out:
 	put_cpu();
@@ -1204,10 +1204,10 @@ void syscall_init(void)
 	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
 	 */
 	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
-	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
-	wrmsrl(MSR_CSTAR, ia32_cstar_target);
+	wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
 	/*
 	 * This only works on Intel CPUs.
 	 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
@@ -1216,7 +1216,7 @@ void syscall_init(void)
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
 	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
-	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
+	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, ignore_sysret);
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
deleted file mode 100644
index 1c309763e321..000000000000
--- a/arch/x86/kernel/entry_32.S
+++ /dev/null
@@ -1,1401 +0,0 @@
-/*
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
- *
- * Stack layout in 'syscall_exit':
- * 	ptrace needs to have all regs on the stack.
- *	if the order here is changed, it needs to be
- *	updated in fork.c:copy_process, signal.c:do_signal,
- *	ptrace.c and ptrace.h
- *
- *	 0(%esp) - %ebx
- *	 4(%esp) - %ecx
- *	 8(%esp) - %edx
- *       C(%esp) - %esi
- *	10(%esp) - %edi
- *	14(%esp) - %ebp
- *	18(%esp) - %eax
- *	1C(%esp) - %ds
- *	20(%esp) - %es
- *	24(%esp) - %fs
- *	28(%esp) - %gs		saved iff !CONFIG_X86_32_LAZY_GS
- *	2C(%esp) - orig_eax
- *	30(%esp) - %eip
- *	34(%esp) - %cs
- *	38(%esp) - %eflags
- *	3C(%esp) - %oldesp
- *	40(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
- */
-
-#include <linux/linkage.h>
-#include <linux/err.h>
-#include <asm/thread_info.h>
-#include <asm/irqflags.h>
-#include <asm/errno.h>
-#include <asm/segment.h>
-#include <asm/smp.h>
-#include <asm/page_types.h>
-#include <asm/percpu.h>
-#include <asm/dwarf2.h>
-#include <asm/processor-flags.h>
-#include <asm/ftrace.h>
-#include <asm/irq_vectors.h>
-#include <asm/cpufeature.h>
-#include <asm/alternative-asm.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE	   0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysenter_audit	syscall_trace_entry
-#define sysexit_audit	syscall_exit_work
-#endif
-
-	.section .entry.text, "ax"
-
-/*
- * We use macros for low-level operations which need to be overridden
- * for paravirtualization.  The following will never clobber any registers:
- *   INTERRUPT_RETURN (aka. "iret")
- *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
- *
- * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
- * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
- * Allowing a register to be clobbered can shrink the paravirt replacement
- * enough to patch inline, increasing performance.
- */
-
-#ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
-#else
-#define preempt_stop(clobbers)
-#define resume_kernel		restore_all
-#endif
-
-.macro TRACE_IRQS_IRET
-#ifdef CONFIG_TRACE_IRQFLAGS
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)     # interrupts off?
-	jz 1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * User gs save/restore
- *
- * %gs is used for userland TLS and kernel only uses it for stack
- * canary which is required to be at %gs:20 by gcc.  Read the comment
- * at the top of stackprotector.h for more info.
- *
- * Local labels 98 and 99 are used.
- */
-#ifdef CONFIG_X86_32_LAZY_GS
-
- /* unfortunately push/pop can't be no-op */
-.macro PUSH_GS
-	pushl_cfi $0
-.endm
-.macro POP_GS pop=0
-	addl $(4 + \pop), %esp
-	CFI_ADJUST_CFA_OFFSET -(4 + \pop)
-.endm
-.macro POP_GS_EX
-.endm
-
- /* all the rest are no-op */
-.macro PTGS_TO_GS
-.endm
-.macro PTGS_TO_GS_EX
-.endm
-.macro GS_TO_REG reg
-.endm
-.macro REG_TO_PTGS reg
-.endm
-.macro SET_KERNEL_GS reg
-.endm
-
-#else	/* CONFIG_X86_32_LAZY_GS */
-
-.macro PUSH_GS
-	pushl_cfi %gs
-	/*CFI_REL_OFFSET gs, 0*/
-.endm
-
-.macro POP_GS pop=0
-98:	popl_cfi %gs
-	/*CFI_RESTORE gs*/
-  .if \pop <> 0
-	add $\pop, %esp
-	CFI_ADJUST_CFA_OFFSET -\pop
-  .endif
-.endm
-.macro POP_GS_EX
-.pushsection .fixup, "ax"
-99:	movl $0, (%esp)
-	jmp 98b
-.popsection
-	_ASM_EXTABLE(98b,99b)
-.endm
-
-.macro PTGS_TO_GS
-98:	mov PT_GS(%esp), %gs
-.endm
-.macro PTGS_TO_GS_EX
-.pushsection .fixup, "ax"
-99:	movl $0, PT_GS(%esp)
-	jmp 98b
-.popsection
-	_ASM_EXTABLE(98b,99b)
-.endm
-
-.macro GS_TO_REG reg
-	movl %gs, \reg
-	/*CFI_REGISTER gs, \reg*/
-.endm
-.macro REG_TO_PTGS reg
-	movl \reg, PT_GS(%esp)
-	/*CFI_REL_OFFSET gs, PT_GS*/
-.endm
-.macro SET_KERNEL_GS reg
-	movl $(__KERNEL_STACK_CANARY), \reg
-	movl \reg, %gs
-.endm
-
-#endif	/* CONFIG_X86_32_LAZY_GS */
-
-.macro SAVE_ALL
-	cld
-	PUSH_GS
-	pushl_cfi %fs
-	/*CFI_REL_OFFSET fs, 0;*/
-	pushl_cfi %es
-	/*CFI_REL_OFFSET es, 0;*/
-	pushl_cfi %ds
-	/*CFI_REL_OFFSET ds, 0;*/
-	pushl_cfi %eax
-	CFI_REL_OFFSET eax, 0
-	pushl_cfi %ebp
-	CFI_REL_OFFSET ebp, 0
-	pushl_cfi %edi
-	CFI_REL_OFFSET edi, 0
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
-	pushl_cfi %edx
-	CFI_REL_OFFSET edx, 0
-	pushl_cfi %ecx
-	CFI_REL_OFFSET ecx, 0
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
-	movl $(__USER_DS), %edx
-	movl %edx, %ds
-	movl %edx, %es
-	movl $(__KERNEL_PERCPU), %edx
-	movl %edx, %fs
-	SET_KERNEL_GS %edx
-.endm
-
-.macro RESTORE_INT_REGS
-	popl_cfi %ebx
-	CFI_RESTORE ebx
-	popl_cfi %ecx
-	CFI_RESTORE ecx
-	popl_cfi %edx
-	CFI_RESTORE edx
-	popl_cfi %esi
-	CFI_RESTORE esi
-	popl_cfi %edi
-	CFI_RESTORE edi
-	popl_cfi %ebp
-	CFI_RESTORE ebp
-	popl_cfi %eax
-	CFI_RESTORE eax
-.endm
-
-.macro RESTORE_REGS pop=0
-	RESTORE_INT_REGS
-1:	popl_cfi %ds
-	/*CFI_RESTORE ds;*/
-2:	popl_cfi %es
-	/*CFI_RESTORE es;*/
-3:	popl_cfi %fs
-	/*CFI_RESTORE fs;*/
-	POP_GS \pop
-.pushsection .fixup, "ax"
-4:	movl $0, (%esp)
-	jmp 1b
-5:	movl $0, (%esp)
-	jmp 2b
-6:	movl $0, (%esp)
-	jmp 3b
-.popsection
-	_ASM_EXTABLE(1b,4b)
-	_ASM_EXTABLE(2b,5b)
-	_ASM_EXTABLE(3b,6b)
-	POP_GS_EX
-.endm
-
-.macro RING0_INT_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 3*4
-	/*CFI_OFFSET cs, -2*4;*/
-	CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_EC_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 4*4
-	/*CFI_OFFSET cs, -2*4;*/
-	CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_PTREGS_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
-	/*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
-	CFI_OFFSET eip, PT_EIP-PT_OLDESP
-	/*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
-	/*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
-	CFI_OFFSET eax, PT_EAX-PT_OLDESP
-	CFI_OFFSET ebp, PT_EBP-PT_OLDESP
-	CFI_OFFSET edi, PT_EDI-PT_OLDESP
-	CFI_OFFSET esi, PT_ESI-PT_OLDESP
-	CFI_OFFSET edx, PT_EDX-PT_OLDESP
-	CFI_OFFSET ecx, PT_ECX-PT_OLDESP
-	CFI_OFFSET ebx, PT_EBX-PT_OLDESP
-.endm
-
-ENTRY(ret_from_fork)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	call schedule_tail
-	GET_THREAD_INFO(%ebp)
-	popl_cfi %eax
-	pushl_cfi $0x0202		# Reset kernel eflags
-	popfl_cfi
-	jmp syscall_exit
-	CFI_ENDPROC
-END(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	call schedule_tail
-	GET_THREAD_INFO(%ebp)
-	popl_cfi %eax
-	pushl_cfi $0x0202		# Reset kernel eflags
-	popfl_cfi
-	movl PT_EBP(%esp),%eax
-	call *PT_EBX(%esp)
-	movl $0,PT_EAX(%esp)
-	jmp syscall_exit
-	CFI_ENDPROC
-ENDPROC(ret_from_kernel_thread)
-
-/*
- * Return to user mode is not as complex as all this looks,
- * but we want the default path for a system call return to
- * go as quickly as possible which is why some of this is
- * less clear than it otherwise should be.
- */
-
-	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-	RING0_PTREGS_FRAME
-ret_from_exception:
-	preempt_stop(CLBR_ANY)
-ret_from_intr:
-	GET_THREAD_INFO(%ebp)
-#ifdef CONFIG_VM86
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
-#else
-	/*
-	 * We can be coming here from child spawned by kernel_thread().
-	 */
-	movl PT_CS(%esp), %eax
-	andl $SEGMENT_RPL_MASK, %eax
-#endif
-	cmpl $USER_RPL, %eax
-	jb resume_kernel		# not returning to v8086 or userspace
-
-ENTRY(resume_userspace)
-	LOCKDEP_SYS_EXIT
- 	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
-					# int/exception return?
-	jne work_pending
-	jmp restore_all
-END(ret_from_exception)
-
-#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
-	DISABLE_INTERRUPTS(CLBR_ANY)
-need_resched:
-	cmpl $0,PER_CPU_VAR(__preempt_count)
-	jnz restore_all
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
-	jz restore_all
-	call preempt_schedule_irq
-	jmp need_resched
-END(resume_kernel)
-#endif
-	CFI_ENDPROC
-
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
-   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
-
-	# sysenter call handler stub
-ENTRY(ia32_sysenter_target)
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 0
-	CFI_REGISTER esp, ebp
-	movl TSS_sysenter_sp0(%esp),%esp
-sysenter_past_esp:
-	/*
-	 * Interrupts are disabled here, but we can't trace it until
-	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
-	 * we immediately enable interrupts at that point anyway.
-	 */
-	pushl_cfi $__USER_DS
-	/*CFI_REL_OFFSET ss, 0*/
-	pushl_cfi %ebp
-	CFI_REL_OFFSET esp, 0
-	pushfl_cfi
-	orl $X86_EFLAGS_IF, (%esp)
-	pushl_cfi $__USER_CS
-	/*CFI_REL_OFFSET cs, 0*/
-	/*
-	 * Push current_thread_info()->sysenter_return to the stack.
-	 * A tiny bit of offset fixup is necessary: TI_sysenter_return
-	 * is relative to thread_info, which is at the bottom of the
-	 * kernel stack page.  4*4 means the 4 words pushed above;
-	 * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
-	 * and THREAD_SIZE takes us to the bottom.
-	 */
-	pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
-	CFI_REL_OFFSET eip, 0
-
-	pushl_cfi %eax
-	SAVE_ALL
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-/*
- * Load the potential sixth argument from user stack.
- * Careful about security.
- */
-	cmpl $__PAGE_OFFSET-3,%ebp
-	jae syscall_fault
-	ASM_STAC
-1:	movl (%ebp),%ebp
-	ASM_CLAC
-	movl %ebp,PT_EBP(%esp)
-	_ASM_EXTABLE(1b,syscall_fault)
-
-	GET_THREAD_INFO(%ebp)
-
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz sysenter_audit
-sysenter_do_call:
-	cmpl $(NR_syscalls), %eax
-	jae sysenter_badsys
-	call *sys_call_table(,%eax,4)
-sysenter_after_call:
-	movl %eax,PT_EAX(%esp)
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx
-	jnz sysexit_audit
-sysenter_exit:
-/* if something modifies registers it must also disable sysexit */
-	movl PT_EIP(%esp), %edx
-	movl PT_OLDESP(%esp), %ecx
-	xorl %ebp,%ebp
-	TRACE_IRQS_ON
-1:	mov  PT_FS(%esp), %fs
-	PTGS_TO_GS
-	ENABLE_INTERRUPTS_SYSEXIT
-
-#ifdef CONFIG_AUDITSYSCALL
-sysenter_audit:
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
-	/* movl PT_EAX(%esp), %eax	already set, syscall number: 1st arg to audit */
-	movl PT_EBX(%esp), %edx		/* ebx/a0: 2nd arg to audit */
-	/* movl PT_ECX(%esp), %ecx	already set, a1: 3nd arg to audit */
-	pushl_cfi PT_ESI(%esp)		/* a3: 5th arg */
-	pushl_cfi PT_EDX+4(%esp)	/* a2: 4th arg */
-	call __audit_syscall_entry
-	popl_cfi %ecx /* get that remapped edx off the stack */
-	popl_cfi %ecx /* get that remapped esi off the stack */
-	movl PT_EAX(%esp),%eax		/* reload syscall number */
-	jmp sysenter_do_call
-
-sysexit_audit:
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	movl %eax,%edx		/* second arg, syscall return value */
-	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
-	setbe %al		/* 1 if so, 0 if not */
-	movzbl %al,%eax		/* zero-extend that */
-	call __audit_syscall_exit
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
-	movl PT_EAX(%esp),%eax	/* reload syscall return value */
-	jmp sysenter_exit
-#endif
-
-	CFI_ENDPROC
-.pushsection .fixup,"ax"
-2:	movl $0,PT_FS(%esp)
-	jmp 1b
-.popsection
-	_ASM_EXTABLE(1b,2b)
-	PTGS_TO_GS_EX
-ENDPROC(ia32_sysenter_target)
-
-	# system call handler stub
-ENTRY(system_call)
-	RING0_INT_FRAME			# can't unwind into user space anyway
-	ASM_CLAC
-	pushl_cfi %eax			# save orig_eax
-	SAVE_ALL
-	GET_THREAD_INFO(%ebp)
-					# system call tracing in operation / emulation
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz syscall_trace_entry
-	cmpl $(NR_syscalls), %eax
-	jae syscall_badsys
-syscall_call:
-	call *sys_call_table(,%eax,4)
-syscall_after_call:
-	movl %eax,PT_EAX(%esp)		# store the return value
-syscall_exit:
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx	# current->work
-	jnz syscall_exit_work
-
-restore_all:
-	TRACE_IRQS_IRET
-restore_all_notrace:
-#ifdef CONFIG_X86_ESPFIX32
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
-	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
-	# are returning to the kernel.
-	# See comments in process.c:copy_thread() for details.
-	movb PT_OLDSS(%esp), %ah
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
-	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
-	CFI_REMEMBER_STATE
-	je ldt_ss			# returning to user-space with LDT SS
-#endif
-restore_nocheck:
-	RESTORE_REGS 4			# skip orig_eax/error_code
-irq_return:
-	INTERRUPT_RETURN
-.section .fixup,"ax"
-ENTRY(iret_exc)
-	pushl $0			# no error code
-	pushl $do_iret_error
-	jmp error_code
-.previous
-	_ASM_EXTABLE(irq_return,iret_exc)
-
-#ifdef CONFIG_X86_ESPFIX32
-	CFI_RESTORE_STATE
-ldt_ss:
-#ifdef CONFIG_PARAVIRT
-	/*
-	 * The kernel can't run on a non-flat stack if paravirt mode
-	 * is active.  Rather than try to fixup the high bits of
-	 * ESP, bypass this code entirely.  This may break DOSemu
-	 * and/or Wine support in a paravirt VM, although the option
-	 * is still available to implement the setting of the high
-	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
-	 */
-	cmpl $0, pv_info+PARAVIRT_enabled
-	jne restore_nocheck
-#endif
-
-/*
- * Setup and switch to ESPFIX stack
- *
- * We're returning to userspace with a 16 bit stack. The CPU will not
- * restore the high word of ESP for us on executing iret... This is an
- * "official" bug of all the x86-compatible CPUs, which we can work
- * around to make dosemu and wine happy. We do this by preloading the
- * high word of ESP with the high word of the userspace ESP while
- * compensating for the offset by changing to the ESPFIX segment with
- * a base address that matches for the difference.
- */
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
-	mov %esp, %edx			/* load kernel esp */
-	mov PT_OLDESP(%esp), %eax	/* load userspace esp */
-	mov %dx, %ax			/* eax: new kernel esp */
-	sub %eax, %edx			/* offset (low word is 0) */
-	shr $16, %edx
-	mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
-	mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
-	pushl_cfi $__ESPFIX_SS
-	pushl_cfi %eax			/* new kernel esp */
-	/* Disable interrupts, but do not irqtrace this section: we
-	 * will soon execute iret and the tracer was already set to
-	 * the irqstate after the iret */
-	DISABLE_INTERRUPTS(CLBR_EAX)
-	lss (%esp), %esp		/* switch to espfix segment */
-	CFI_ADJUST_CFA_OFFSET -8
-	jmp restore_nocheck
-#endif
-	CFI_ENDPROC
-ENDPROC(system_call)
-
-	# perform work that needs to be done immediately before resumption
-	ALIGN
-	RING0_PTREGS_FRAME		# can't unwind into user space anyway
-work_pending:
-	testb $_TIF_NEED_RESCHED, %cl
-	jz work_notifysig
-work_resched:
-	call schedule
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
-					# than syscall tracing?
-	jz restore_all
-	testb $_TIF_NEED_RESCHED, %cl
-	jnz work_resched
-
-work_notifysig:				# deal with pending signals and
-					# notify-resume requests
-#ifdef CONFIG_VM86
-	testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
-	movl %esp, %eax
-	jnz work_notifysig_v86		# returning to kernel-space or
-					# vm86-space
-1:
-#else
-	movl %esp, %eax
-#endif
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	movb PT_CS(%esp), %bl
-	andb $SEGMENT_RPL_MASK, %bl
-	cmpb $USER_RPL, %bl
-	jb resume_kernel
-	xorl %edx, %edx
-	call do_notify_resume
-	jmp resume_userspace
-
-#ifdef CONFIG_VM86
-	ALIGN
-work_notifysig_v86:
-	pushl_cfi %ecx			# save ti_flags for do_notify_resume
-	call save_v86_state		# %eax contains pt_regs pointer
-	popl_cfi %ecx
-	movl %eax, %esp
-	jmp 1b
-#endif
-END(work_pending)
-
-	# perform syscall exit tracing
-	ALIGN
-syscall_trace_entry:
-	movl $-ENOSYS,PT_EAX(%esp)
-	movl %esp, %eax
-	call syscall_trace_enter
-	/* What it returned is what we'll actually use.  */
-	cmpl $(NR_syscalls), %eax
-	jnae syscall_call
-	jmp syscall_exit
-END(syscall_trace_entry)
-
-	# perform syscall exit tracing
-	ALIGN
-syscall_exit_work:
-	testl $_TIF_WORK_SYSCALL_EXIT, %ecx
-	jz work_pending
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
-					# schedule() instead
-	movl %esp, %eax
-	call syscall_trace_leave
-	jmp resume_userspace
-END(syscall_exit_work)
-	CFI_ENDPROC
-
-	RING0_INT_FRAME			# can't unwind into user space anyway
-syscall_fault:
-	ASM_CLAC
-	GET_THREAD_INFO(%ebp)
-	movl $-EFAULT,PT_EAX(%esp)
-	jmp resume_userspace
-END(syscall_fault)
-
-syscall_badsys:
-	movl $-ENOSYS,%eax
-	jmp syscall_after_call
-END(syscall_badsys)
-
-sysenter_badsys:
-	movl $-ENOSYS,%eax
-	jmp sysenter_after_call
-END(sysenter_badsys)
-	CFI_ENDPROC
-
-.macro FIXUP_ESPFIX_STACK
-/*
- * Switch back for ESPFIX stack to the normal zerobased stack
- *
- * We can't call C functions using the ESPFIX stack. This code reads
- * the high word of the segment base from the GDT and swiches to the
- * normal stack and adjusts ESP with the matching offset.
- */
-#ifdef CONFIG_X86_ESPFIX32
-	/* fixup the stack */
-	mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
-	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
-	shl $16, %eax
-	addl %esp, %eax			/* the adjusted stack pointer */
-	pushl_cfi $__KERNEL_DS
-	pushl_cfi %eax
-	lss (%esp), %esp		/* switch to the normal stack segment */
-	CFI_ADJUST_CFA_OFFSET -8
-#endif
-.endm
-.macro UNWIND_ESPFIX_STACK
-#ifdef CONFIG_X86_ESPFIX32
-	movl %ss, %eax
-	/* see if on espfix stack */
-	cmpw $__ESPFIX_SS, %ax
-	jne 27f
-	movl $__KERNEL_DS, %eax
-	movl %eax, %ds
-	movl %eax, %es
-	/* switch to normal stack */
-	FIXUP_ESPFIX_STACK
-27:
-#endif
-.endm
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
-	.align 8
-ENTRY(irq_entries_start)
-	RING0_INT_FRAME
-    vector=FIRST_EXTERNAL_VECTOR
-    .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushl_cfi $(~vector+0x80)	/* Note: always in signed byte range */
-    vector=vector+1
-	jmp	common_interrupt
-	CFI_ADJUST_CFA_OFFSET -4
-	.align	8
-    .endr
-END(irq_entries_start)
-
-/*
- * the CPU automatically disables interrupts when executing an IRQ vector,
- * so IRQ-flags tracing has to follow that:
- */
-	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
-	ASM_CLAC
-	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	movl %esp,%eax
-	call do_IRQ
-	jmp ret_from_intr
-ENDPROC(common_interrupt)
-	CFI_ENDPROC
-
-#define BUILD_INTERRUPT3(name, nr, fn)	\
-ENTRY(name)				\
-	RING0_INT_FRAME;		\
-	ASM_CLAC;			\
-	pushl_cfi $~(nr);		\
-	SAVE_ALL;			\
-	TRACE_IRQS_OFF			\
-	movl %esp,%eax;			\
-	call fn;			\
-	jmp ret_from_intr;		\
-	CFI_ENDPROC;			\
-ENDPROC(name)
-
-
-#ifdef CONFIG_TRACING
-#define TRACE_BUILD_INTERRUPT(name, nr)		\
-	BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
-#else
-#define TRACE_BUILD_INTERRUPT(name, nr)
-#endif
-
-#define BUILD_INTERRUPT(name, nr) \
-	BUILD_INTERRUPT3(name, nr, smp_##name); \
-	TRACE_BUILD_INTERRUPT(name, nr)
-
-/* The include is where all of the SMP etc. interrupts come from */
-#include <asm/entry_arch.h>
-
-ENTRY(coprocessor_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_coprocessor_error
-	jmp error_code
-	CFI_ENDPROC
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-#ifdef CONFIG_X86_INVD_BUG
-	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-	ALTERNATIVE "pushl_cfi $do_general_protection",	\
-		    "pushl $do_simd_coprocessor_error", \
-		    X86_FEATURE_XMM
-#else
-	pushl_cfi $do_simd_coprocessor_error
-#endif
-	jmp error_code
-	CFI_ENDPROC
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $-1			# mark this as an int
-	pushl_cfi $do_device_not_available
-	jmp error_code
-	CFI_ENDPROC
-END(device_not_available)
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
-	iret
-	_ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
-
-ENTRY(native_irq_enable_sysexit)
-	sti
-	sysexit
-END(native_irq_enable_sysexit)
-#endif
-
-ENTRY(overflow)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_overflow
-	jmp error_code
-	CFI_ENDPROC
-END(overflow)
-
-ENTRY(bounds)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_bounds
-	jmp error_code
-	CFI_ENDPROC
-END(bounds)
-
-ENTRY(invalid_op)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_invalid_op
-	jmp error_code
-	CFI_ENDPROC
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_coprocessor_segment_overrun
-	jmp error_code
-	CFI_ENDPROC
-END(coprocessor_segment_overrun)
-
-ENTRY(invalid_TSS)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_invalid_TSS
-	jmp error_code
-	CFI_ENDPROC
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_segment_not_present
-	jmp error_code
-	CFI_ENDPROC
-END(segment_not_present)
-
-ENTRY(stack_segment)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_stack_segment
-	jmp error_code
-	CFI_ENDPROC
-END(stack_segment)
-
-ENTRY(alignment_check)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_alignment_check
-	jmp error_code
-	CFI_ENDPROC
-END(alignment_check)
-
-ENTRY(divide_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0			# no error code
-	pushl_cfi $do_divide_error
-	jmp error_code
-	CFI_ENDPROC
-END(divide_error)
-
-#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi machine_check_vector
-	jmp error_code
-	CFI_ENDPROC
-END(machine_check)
-#endif
-
-ENTRY(spurious_interrupt_bug)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_spurious_interrupt_bug
-	jmp error_code
-	CFI_ENDPROC
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_XEN
-/* Xen doesn't set %esp to be precisely what the normal sysenter
-   entrypoint expects, so fix it up before using the normal path. */
-ENTRY(xen_sysenter_target)
-	RING0_INT_FRAME
-	addl $5*4, %esp		/* remove xen-provided frame */
-	CFI_ADJUST_CFA_OFFSET -5*4
-	jmp sysenter_past_esp
-	CFI_ENDPROC
-
-ENTRY(xen_hypervisor_callback)
-	CFI_STARTPROC
-	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	TRACE_IRQS_OFF
-
-	/* Check to see if we got the event in the critical
-	   region in xen_iret_direct, after we've reenabled
-	   events and checked for pending events.  This simulates
-	   iret instruction's behaviour where it delivers a
-	   pending interrupt when enabling interrupts. */
-	movl PT_EIP(%esp),%eax
-	cmpl $xen_iret_start_crit,%eax
-	jb   1f
-	cmpl $xen_iret_end_crit,%eax
-	jae  1f
-
-	jmp  xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1:	mov %esp, %eax
-	call xen_evtchn_do_upcall
-#ifndef CONFIG_PREEMPT
-	call xen_maybe_preempt_hcall
-#endif
-	jmp  ret_from_intr
-	CFI_ENDPROC
-ENDPROC(xen_hypervisor_callback)
-
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-#  1. Fault while reloading DS, ES, FS or GS
-#  2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
-ENTRY(xen_failsafe_callback)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	movl $1,%eax
-1:	mov 4(%esp),%ds
-2:	mov 8(%esp),%es
-3:	mov 12(%esp),%fs
-4:	mov 16(%esp),%gs
-	/* EAX == 0 => Category 1 (Bad segment)
-	   EAX != 0 => Category 2 (Bad IRET) */
-	testl %eax,%eax
-	popl_cfi %eax
-	lea 16(%esp),%esp
-	CFI_ADJUST_CFA_OFFSET -16
-	jz 5f
-	jmp iret_exc
-5:	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	jmp ret_from_exception
-	CFI_ENDPROC
-
-.section .fixup,"ax"
-6:	xorl %eax,%eax
-	movl %eax,4(%esp)
-	jmp 1b
-7:	xorl %eax,%eax
-	movl %eax,8(%esp)
-	jmp 2b
-8:	xorl %eax,%eax
-	movl %eax,12(%esp)
-	jmp 3b
-9:	xorl %eax,%eax
-	movl %eax,16(%esp)
-	jmp 4b
-.previous
-	_ASM_EXTABLE(1b,6b)
-	_ASM_EXTABLE(2b,7b)
-	_ASM_EXTABLE(3b,8b)
-	_ASM_EXTABLE(4b,9b)
-ENDPROC(xen_failsafe_callback)
-
-BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
-		xen_evtchn_do_upcall)
-
-#endif	/* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-
-BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
-	hyperv_vector_handler)
-
-#endif /* CONFIG_HYPERV */
-
-#ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-ENTRY(mcount)
-	ret
-END(mcount)
-
-ENTRY(ftrace_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	pushl $0	/* Pass NULL as regs pointer */
-	movl 4*4(%esp), %eax
-	movl 0x4(%ebp), %edx
-	movl function_trace_op, %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
-
-.globl ftrace_call
-ftrace_call:
-	call ftrace_stub
-
-	addl $4,%esp	/* skip NULL pointer */
-	popl %edx
-	popl %ecx
-	popl %eax
-ftrace_ret:
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-.globl ftrace_graph_call
-ftrace_graph_call:
-	jmp ftrace_stub
-#endif
-
-.globl ftrace_stub
-ftrace_stub:
-	ret
-END(ftrace_caller)
-
-ENTRY(ftrace_regs_caller)
-	pushf	/* push flags before compare (in cs location) */
-
-	/*
-	 * i386 does not save SS and ESP when coming from kernel.
-	 * Instead, to get sp, &regs->sp is used (see ptrace.h).
-	 * Unfortunately, that means eflags must be at the same location
-	 * as the current return ip is. We move the return ip into the
-	 * ip location, and move flags into the return ip location.
-	 */
-	pushl 4(%esp)	/* save return ip into ip slot */
-
-	pushl $0	/* Load 0 into orig_ax */
-	pushl %gs
-	pushl %fs
-	pushl %es
-	pushl %ds
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
-
-	movl 13*4(%esp), %eax	/* Get the saved flags */
-	movl %eax, 14*4(%esp)	/* Move saved flags into regs->flags location */
-				/* clobbering return ip */
-	movl $__KERNEL_CS,13*4(%esp)
-
-	movl 12*4(%esp), %eax	/* Load ip (1st parameter) */
-	subl $MCOUNT_INSN_SIZE, %eax	/* Adjust ip */
-	movl 0x4(%ebp), %edx	/* Load parent ip (2nd parameter) */
-	movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
-	pushl %esp		/* Save pt_regs as 4th parameter */
-
-GLOBAL(ftrace_regs_call)
-	call ftrace_stub
-
-	addl $4, %esp		/* Skip pt_regs */
-	movl 14*4(%esp), %eax	/* Move flags back into cs */
-	movl %eax, 13*4(%esp)	/* Needed to keep addl from modifying flags */
-	movl 12*4(%esp), %eax	/* Get return ip from regs->ip */
-	movl %eax, 14*4(%esp)	/* Put return ip back for ret */
-
-	popl %ebx
-	popl %ecx
-	popl %edx
-	popl %esi
-	popl %edi
-	popl %ebp
-	popl %eax
-	popl %ds
-	popl %es
-	popl %fs
-	popl %gs
-	addl $8, %esp		/* Skip orig_ax and ip */
-	popf			/* Pop flags at end (no addl to corrupt flags) */
-	jmp ftrace_ret
-
-	popf
-	jmp  ftrace_stub
-#else /* ! CONFIG_DYNAMIC_FTRACE */
-
-ENTRY(mcount)
-	cmpl $__PAGE_OFFSET, %esp
-	jb ftrace_stub		/* Paging not enabled yet? */
-
-	cmpl $ftrace_stub, ftrace_trace_function
-	jnz trace
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	cmpl $ftrace_stub, ftrace_graph_return
-	jnz ftrace_graph_caller
-
-	cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
-	jnz ftrace_graph_caller
-#endif
-.globl ftrace_stub
-ftrace_stub:
-	ret
-
-	/* taken from glibc */
-trace:
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	movl 0x4(%ebp), %edx
-	subl $MCOUNT_INSN_SIZE, %eax
-
-	call *ftrace_trace_function
-
-	popl %edx
-	popl %ecx
-	popl %eax
-	jmp ftrace_stub
-END(mcount)
-#endif /* CONFIG_DYNAMIC_FTRACE */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	lea 0x4(%ebp), %edx
-	movl (%ebp), %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
-	call prepare_ftrace_return
-	popl %edx
-	popl %ecx
-	popl %eax
-	ret
-END(ftrace_graph_caller)
-
-.globl return_to_handler
-return_to_handler:
-	pushl %eax
-	pushl %edx
-	movl %ebp, %eax
-	call ftrace_return_to_handler
-	movl %eax, %ecx
-	popl %edx
-	popl %eax
-	jmp *%ecx
-#endif
-
-#ifdef CONFIG_TRACING
-ENTRY(trace_page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $trace_do_page_fault
-	jmp error_code
-	CFI_ENDPROC
-END(trace_page_fault)
-#endif
-
-ENTRY(page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_page_fault
-	ALIGN
-error_code:
-	/* the function address is in %gs's slot on the stack */
-	pushl_cfi %fs
-	/*CFI_REL_OFFSET fs, 0*/
-	pushl_cfi %es
-	/*CFI_REL_OFFSET es, 0*/
-	pushl_cfi %ds
-	/*CFI_REL_OFFSET ds, 0*/
-	pushl_cfi_reg eax
-	pushl_cfi_reg ebp
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg edx
-	pushl_cfi_reg ecx
-	pushl_cfi_reg ebx
-	cld
-	movl $(__KERNEL_PERCPU), %ecx
-	movl %ecx, %fs
-	UNWIND_ESPFIX_STACK
-	GS_TO_REG %ecx
-	movl PT_GS(%esp), %edi		# get the function address
-	movl PT_ORIG_EAX(%esp), %edx	# get the error code
-	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
-	REG_TO_PTGS %ecx
-	SET_KERNEL_GS %ecx
-	movl $(__USER_DS), %ecx
-	movl %ecx, %ds
-	movl %ecx, %es
-	TRACE_IRQS_OFF
-	movl %esp,%eax			# pt_regs pointer
-	call *%edi
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(page_fault)
-
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-.macro FIX_STACK offset ok label
-	cmpw $__KERNEL_CS, 4(%esp)
-	jne \ok
-\label:
-	movl TSS_sysenter_sp0 + \offset(%esp), %esp
-	CFI_DEF_CFA esp, 0
-	CFI_UNDEFINED eip
-	pushfl_cfi
-	pushl_cfi $__KERNEL_CS
-	pushl_cfi $sysenter_past_esp
-	CFI_REL_OFFSET eip, 0
-.endm
-
-ENTRY(debug)
-	RING0_INT_FRAME
-	ASM_CLAC
-	cmpl $ia32_sysenter_target,(%esp)
-	jne debug_stack_correct
-	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
-debug_stack_correct:
-	pushl_cfi $-1			# mark this as an int
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx			# error code 0
-	movl %esp,%eax			# pt_regs pointer
-	call do_debug
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got  an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-ENTRY(nmi)
-	RING0_INT_FRAME
-	ASM_CLAC
-#ifdef CONFIG_X86_ESPFIX32
-	pushl_cfi %eax
-	movl %ss, %eax
-	cmpw $__ESPFIX_SS, %ax
-	popl_cfi %eax
-	je nmi_espfix_stack
-#endif
-	cmpl $ia32_sysenter_target,(%esp)
-	je nmi_stack_fixup
-	pushl_cfi %eax
-	movl %esp,%eax
-	/* Do not access memory above the end of our stack page,
-	 * it might not exist.
-	 */
-	andl $(THREAD_SIZE-1),%eax
-	cmpl $(THREAD_SIZE-20),%eax
-	popl_cfi %eax
-	jae nmi_stack_correct
-	cmpl $ia32_sysenter_target,12(%esp)
-	je nmi_debug_stack_check
-nmi_stack_correct:
-	/* We have a RING0_INT_FRAME here */
-	pushl_cfi %eax
-	SAVE_ALL
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_nmi
-	jmp restore_all_notrace
-	CFI_ENDPROC
-
-nmi_stack_fixup:
-	RING0_INT_FRAME
-	FIX_STACK 12, nmi_stack_correct, 1
-	jmp nmi_stack_correct
-
-nmi_debug_stack_check:
-	/* We have a RING0_INT_FRAME here */
-	cmpw $__KERNEL_CS,16(%esp)
-	jne nmi_stack_correct
-	cmpl $debug,(%esp)
-	jb nmi_stack_correct
-	cmpl $debug_esp_fix_insn,(%esp)
-	ja nmi_stack_correct
-	FIX_STACK 24, nmi_stack_correct, 1
-	jmp nmi_stack_correct
-
-#ifdef CONFIG_X86_ESPFIX32
-nmi_espfix_stack:
-	/* We have a RING0_INT_FRAME here.
-	 *
-	 * create the pointer to lss back
-	 */
-	pushl_cfi %ss
-	pushl_cfi %esp
-	addl $4, (%esp)
-	/* copy the iret frame of 12 bytes */
-	.rept 3
-	pushl_cfi 16(%esp)
-	.endr
-	pushl_cfi %eax
-	SAVE_ALL
-	FIXUP_ESPFIX_STACK		# %eax == %esp
-	xorl %edx,%edx			# zero error code
-	call do_nmi
-	RESTORE_REGS
-	lss 12+4(%esp), %esp		# back to espfix stack
-	CFI_ADJUST_CFA_OFFSET -24
-	jmp irq_return
-#endif
-	CFI_ENDPROC
-END(nmi)
-
-ENTRY(int3)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $-1			# mark this as an int
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_int3
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(int3)
-
-ENTRY(general_protection)
-	RING0_EC_FRAME
-	pushl_cfi $do_general_protection
-	jmp error_code
-	CFI_ENDPROC
-END(general_protection)
-
-#ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_async_page_fault
-	jmp error_code
-	CFI_ENDPROC
-END(async_page_fault)
-#endif
-
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 2b55ee6db053..5a4668136e98 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 	clear_bss();
 
 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
-		set_intr_gate(i, early_idt_handlers[i]);
+		set_intr_gate(i, early_idt_handler_array[i]);
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	copy_bootdata(__va(real_mode_data));
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 02d257256200..544dec4cc605 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -478,21 +478,22 @@ is486:
 __INIT
 setup_once:
 	/*
-	 * Set up a idt with 256 entries pointing to ignore_int,
-	 * interrupt gates. It doesn't actually load idt - that needs
-	 * to be done on each CPU. Interrupts are enabled elsewhere,
-	 * when we can be relatively sure everything is ok.
+	 * Set up a idt with 256 interrupt gates that push zero if there
+	 * is no error code and then jump to early_idt_handler_common.
+	 * It doesn't actually load the idt - that needs to be done on
+	 * each CPU. Interrupts are enabled elsewhere, when we can be
+	 * relatively sure everything is ok.
 	 */
 
 	movl $idt_table,%edi
-	movl $early_idt_handlers,%eax
+	movl $early_idt_handler_array,%eax
 	movl $NUM_EXCEPTION_VECTORS,%ecx
 1:
 	movl %eax,(%edi)
 	movl %eax,4(%edi)
 	/* interrupt gate, dpl=0, present */
 	movl $(0x8E000000 + __KERNEL_CS),2(%edi)
-	addl $9,%eax
+	addl $EARLY_IDT_HANDLER_SIZE,%eax
 	addl $8,%edi
 	loop 1b
 
@@ -524,26 +525,28 @@ setup_once:
 	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-ENTRY(early_idt_handlers)
+ENTRY(early_idt_handler_array)
 	# 36(%esp) %eflags
 	# 32(%esp) %cs
 	# 28(%esp) %eip
 	# 24(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushl $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushl $i		# 20(%esp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-ENDPROC(early_idt_handlers)
+ENDPROC(early_idt_handler_array)
 	
-	/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%esp)		# X86_TRAP_NMI
@@ -603,7 +606,7 @@ ex_entry:
 .Lis_nmi:
 	addl $8,%esp		/* drop vector number and error code */
 	iret
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
 	ALIGN
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 43eafc8afb69..e5c27f729a38 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -321,26 +321,28 @@ bad_address:
 	jmp bad_address
 
 	__INIT
-	.globl early_idt_handlers
-early_idt_handlers:
+ENTRY(early_idt_handler_array)
 	# 104(%rsp) %rflags
 	#  96(%rsp) %cs
 	#  88(%rsp) %rip
 	#  80(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushq $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushq $i		# 72(%rsp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
+ENDPROC(early_idt_handler_array)
 
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%rsp)		# X86_TRAP_NMI
@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
 .Lis_nmi:
 	addq $16,%rsp		# drop vector number and error code
 	INTERRUPT_RETURN
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 	__INITDATA
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c30bbb5d56e2..de379366f6d1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -72,8 +72,7 @@ gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
 #else
 #include <asm/processor-flags.h>
 #include <asm/setup.h>
-
-asmlinkage int system_call(void);
+#include <asm/proto.h>
 #endif
 
 /* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -980,12 +979,12 @@ void __init trap_init(void)
 		set_bit(i, used_vectors);
 
 #ifdef CONFIG_IA32_EMULATION
-	set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+	set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
 #ifdef CONFIG_X86_32
-	set_system_trap_gate(IA32_SYSCALL_VECTOR, &system_call);
+	set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 982989d282ff..f2587888d987 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -17,7 +17,6 @@ clean-files := inat-tables.c
 obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
 
 lib-y := delay.o misc.o cmdline.o
-lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index 00933d5e992f..9b0ca8fe80fc 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -11,26 +11,23 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 /* if you want SMP support, implement these with real spinlocks */
 .macro LOCK reg
-	pushfl_cfi
+	pushfl
 	cli
 .endm
 
 .macro UNLOCK reg
-	popfl_cfi
+	popfl
 .endm
 
 #define BEGIN(op) \
 .macro endp; \
-	CFI_ENDPROC; \
 ENDPROC(atomic64_##op##_386); \
 .purgem endp; \
 .endm; \
 ENTRY(atomic64_##op##_386); \
-	CFI_STARTPROC; \
 	LOCK v;
 
 #define ENDP endp
diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
index 082a85167a5b..db3ae85440ff 100644
--- a/arch/x86/lib/atomic64_cx8_32.S
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -11,7 +11,6 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 .macro read64 reg
 	movl %ebx, %eax
@@ -22,16 +21,11 @@
 .endm
 
 ENTRY(atomic64_read_cx8)
-	CFI_STARTPROC
-
 	read64 %ecx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_read_cx8)
 
 ENTRY(atomic64_set_cx8)
-	CFI_STARTPROC
-
 1:
 /* we don't need LOCK_PREFIX since aligned 64-bit writes
  * are atomic on 586 and newer */
@@ -39,28 +33,23 @@ ENTRY(atomic64_set_cx8)
 	jne 1b
 
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_set_cx8)
 
 ENTRY(atomic64_xchg_cx8)
-	CFI_STARTPROC
-
 1:
 	LOCK_PREFIX
 	cmpxchg8b (%esi)
 	jne 1b
 
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_xchg_cx8)
 
 .macro addsub_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebp
-	pushl_cfi_reg ebx
-	pushl_cfi_reg esi
-	pushl_cfi_reg edi
+	pushl %ebp
+	pushl %ebx
+	pushl %esi
+	pushl %edi
 
 	movl %eax, %esi
 	movl %edx, %edi
@@ -79,12 +68,11 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg edi
-	popl_cfi_reg esi
-	popl_cfi_reg ebx
-	popl_cfi_reg ebp
+	popl %edi
+	popl %esi
+	popl %ebx
+	popl %ebp
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
 .endm
 
@@ -93,8 +81,7 @@ addsub_return sub sub sbb
 
 .macro incdec_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -109,9 +96,8 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
 .endm
 
@@ -119,8 +105,7 @@ incdec_return inc add adc
 incdec_return dec sub sbb
 
 ENTRY(atomic64_dec_if_positive_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -136,18 +121,16 @@ ENTRY(atomic64_dec_if_positive_cx8)
 2:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_dec_if_positive_cx8)
 
 ENTRY(atomic64_add_unless_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebp
-	pushl_cfi_reg ebx
+	pushl %ebp
+	pushl %ebx
 /* these just push these two parameters on the stack */
-	pushl_cfi_reg edi
-	pushl_cfi_reg ecx
+	pushl %edi
+	pushl %ecx
 
 	movl %eax, %ebp
 	movl %edx, %edi
@@ -168,21 +151,18 @@ ENTRY(atomic64_add_unless_cx8)
 	movl $1, %eax
 3:
 	addl $8, %esp
-	CFI_ADJUST_CFA_OFFSET -8
-	popl_cfi_reg ebx
-	popl_cfi_reg ebp
+	popl %ebx
+	popl %ebp
 	ret
 4:
 	cmpl %edx, 4(%esp)
 	jne 2b
 	xorl %eax, %eax
 	jmp 3b
-	CFI_ENDPROC
 ENDPROC(atomic64_add_unless_cx8)
 
 ENTRY(atomic64_inc_not_zero_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -199,7 +179,6 @@ ENTRY(atomic64_inc_not_zero_cx8)
 
 	movl $1, %eax
 3:
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S
index 9bc944a91274..c1e623209853 100644
--- a/arch/x86/lib/checksum_32.S
+++ b/arch/x86/lib/checksum_32.S
@@ -26,7 +26,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
 				
@@ -50,9 +49,8 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
 	   * alignment for the unrolled loop.
 	   */		
 ENTRY(csum_partial)
-	CFI_STARTPROC
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %esi
+	pushl %ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg: unsigned char *buff
@@ -129,10 +127,9 @@ ENTRY(csum_partial)
 	jz 8f
 	roll $8, %eax
 8:
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
+	popl %ebx
+	popl %esi
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial)
 
 #else
@@ -140,9 +137,8 @@ ENDPROC(csum_partial)
 /* Version for PentiumII/PPro */
 
 ENTRY(csum_partial)
-	CFI_STARTPROC
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %esi
+	pushl %ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg:	const unsigned char *buf
@@ -249,10 +245,9 @@ ENTRY(csum_partial)
 	jz 90f
 	roll $8, %eax
 90: 
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
+	popl %ebx
+	popl %esi
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial)
 				
 #endif
@@ -287,12 +282,10 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 #define FP		12
 		
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
 	subl  $4,%esp	
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %edi
+	pushl %esi
+	pushl %ebx
 	movl ARGBASE+16(%esp),%eax	# sum
 	movl ARGBASE+12(%esp),%ecx	# len
 	movl ARGBASE+4(%esp),%esi	# src
@@ -401,12 +394,11 @@ DST(	movb %cl, (%edi)	)
 
 .previous
 
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi %ecx			# equivalent to addl $4,%esp
+	popl %ebx
+	popl %esi
+	popl %edi
+	popl %ecx			# equivalent to addl $4,%esp
 	ret	
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
 
 #else
@@ -426,10 +418,9 @@ ENDPROC(csum_partial_copy_generic)
 #define ARGBASE 12
 		
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
+	pushl %ebx
+	pushl %edi
+	pushl %esi
 	movl ARGBASE+4(%esp),%esi	#src
 	movl ARGBASE+8(%esp),%edi	#dst	
 	movl ARGBASE+12(%esp),%ecx	#len
@@ -489,11 +480,10 @@ DST(	movb %dl, (%edi)         )
 	jmp  7b			
 .previous				
 
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi_reg ebx
+	popl %esi
+	popl %edi
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
 				
 #undef ROUND
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index e67e579c93bd..a2fe51b00cce 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,5 +1,4 @@
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -15,7 +14,6 @@
  * %rdi	- page
  */
 ENTRY(clear_page)
-	CFI_STARTPROC
 
 	ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp clear_page_c_e", X86_FEATURE_ERMS
@@ -24,11 +22,9 @@ ENTRY(clear_page)
 	xorl %eax,%eax
 	rep stosq
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page)
 
 ENTRY(clear_page_orig)
-	CFI_STARTPROC
 
 	xorl   %eax,%eax
 	movl   $4096/64,%ecx
@@ -48,14 +44,11 @@ ENTRY(clear_page_orig)
 	jnz	.Lloop
 	nop
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page_orig)
 
 ENTRY(clear_page_c_e)
-	CFI_STARTPROC
 	movl $4096,%ecx
 	xorl %eax,%eax
 	rep stosb
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page_c_e)
diff --git a/arch/x86/lib/cmpxchg16b_emu.S b/arch/x86/lib/cmpxchg16b_emu.S
index 40a172541ee2..9b330242e740 100644
--- a/arch/x86/lib/cmpxchg16b_emu.S
+++ b/arch/x86/lib/cmpxchg16b_emu.S
@@ -6,7 +6,6 @@
  *
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/percpu.h>
 
 .text
@@ -21,7 +20,6 @@
  * %al  : Operation successful
  */
 ENTRY(this_cpu_cmpxchg16b_emu)
-CFI_STARTPROC
 
 #
 # Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
@@ -32,7 +30,7 @@ CFI_STARTPROC
 # *atomic* on a single cpu (as provided by the this_cpu_xx class of
 # macros).
 #
-	pushfq_cfi
+	pushfq
 	cli
 
 	cmpq PER_CPU_VAR((%rsi)), %rax
@@ -43,17 +41,13 @@ CFI_STARTPROC
 	movq %rbx, PER_CPU_VAR((%rsi))
 	movq %rcx, PER_CPU_VAR(8(%rsi))
 
-	CFI_REMEMBER_STATE
-	popfq_cfi
+	popfq
 	mov $1, %al
 	ret
 
-	CFI_RESTORE_STATE
 .Lnot_same:
-	popfq_cfi
+	popfq
 	xor %al,%al
 	ret
 
-CFI_ENDPROC
-
 ENDPROC(this_cpu_cmpxchg16b_emu)
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
index b4807fce5177..ad5349778490 100644
--- a/arch/x86/lib/cmpxchg8b_emu.S
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -7,7 +7,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 .text
 
@@ -20,14 +19,13 @@
  * %ecx : high 32 bits of new value
  */
 ENTRY(cmpxchg8b_emu)
-CFI_STARTPROC
 
 #
 # Emulate 'cmpxchg8b (%esi)' on UP except we don't
 # set the whole ZF thing (caller will just compare
 # eax:edx with the expected value)
 #
-	pushfl_cfi
+	pushfl
 	cli
 
 	cmpl  (%esi), %eax
@@ -38,18 +36,15 @@ CFI_STARTPROC
 	movl %ebx,  (%esi)
 	movl %ecx, 4(%esi)
 
-	CFI_REMEMBER_STATE
-	popfl_cfi
+	popfl
 	ret
 
-	CFI_RESTORE_STATE
 .Lnot_same:
 	movl  (%esi), %eax
 .Lhalf_same:
 	movl 4(%esi), %edx
 
-	popfl_cfi
+	popfl
 	ret
 
-CFI_ENDPROC
 ENDPROC(cmpxchg8b_emu)
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 8239dbcbf984..009f98216b7e 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -1,7 +1,6 @@
 /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -13,22 +12,16 @@
  */
 	ALIGN
 ENTRY(copy_page)
-	CFI_STARTPROC
 	ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
 	movl	$4096/8, %ecx
 	rep	movsq
 	ret
-	CFI_ENDPROC
 ENDPROC(copy_page)
 
 ENTRY(copy_page_regs)
-	CFI_STARTPROC
 	subq	$2*8,	%rsp
-	CFI_ADJUST_CFA_OFFSET 2*8
 	movq	%rbx,	(%rsp)
-	CFI_REL_OFFSET rbx, 0
 	movq	%r12,	1*8(%rsp)
-	CFI_REL_OFFSET r12, 1*8
 
 	movl	$(4096/64)-5,	%ecx
 	.p2align 4
@@ -87,11 +80,7 @@ ENTRY(copy_page_regs)
 	jnz	.Loop2
 
 	movq	(%rsp), %rbx
-	CFI_RESTORE rbx
 	movq	1*8(%rsp), %r12
-	CFI_RESTORE r12
 	addq	$2*8, %rsp
-	CFI_ADJUST_CFA_OFFSET -2*8
 	ret
-	CFI_ENDPROC
 ENDPROC(copy_page_regs)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index e4b3beee83bd..982ce34f4a9b 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -7,7 +7,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
@@ -18,7 +17,6 @@
 
 /* Standard copy_to_user with segment limit checking */
 ENTRY(_copy_to_user)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rdi,%rcx
 	addq %rdx,%rcx
@@ -30,12 +28,10 @@ ENTRY(_copy_to_user)
 		      X86_FEATURE_REP_GOOD,			\
 		      "jmp copy_user_enhanced_fast_string",	\
 		      X86_FEATURE_ERMS
-	CFI_ENDPROC
 ENDPROC(_copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
 ENTRY(_copy_from_user)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rsi,%rcx
 	addq %rdx,%rcx
@@ -47,14 +43,12 @@ ENTRY(_copy_from_user)
 		      X86_FEATURE_REP_GOOD,			\
 		      "jmp copy_user_enhanced_fast_string",	\
 		      X86_FEATURE_ERMS
-	CFI_ENDPROC
 ENDPROC(_copy_from_user)
 
 	.section .fixup,"ax"
 	/* must zero dest */
 ENTRY(bad_from_user)
 bad_from_user:
-	CFI_STARTPROC
 	movl %edx,%ecx
 	xorl %eax,%eax
 	rep
@@ -62,7 +56,6 @@ bad_from_user:
 bad_to_user:
 	movl %edx,%eax
 	ret
-	CFI_ENDPROC
 ENDPROC(bad_from_user)
 	.previous
 
@@ -80,7 +73,6 @@ ENDPROC(bad_from_user)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_generic_unrolled)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
@@ -162,7 +154,6 @@ ENTRY(copy_user_generic_unrolled)
 	_ASM_EXTABLE(19b,40b)
 	_ASM_EXTABLE(21b,50b)
 	_ASM_EXTABLE(22b,50b)
-	CFI_ENDPROC
 ENDPROC(copy_user_generic_unrolled)
 
 /* Some CPUs run faster using the string copy instructions.
@@ -184,7 +175,6 @@ ENDPROC(copy_user_generic_unrolled)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_generic_string)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 2f		/* less than 8 bytes, go to byte copy loop */
@@ -209,7 +199,6 @@ ENTRY(copy_user_generic_string)
 
 	_ASM_EXTABLE(1b,11b)
 	_ASM_EXTABLE(3b,12b)
-	CFI_ENDPROC
 ENDPROC(copy_user_generic_string)
 
 /*
@@ -225,7 +214,6 @@ ENDPROC(copy_user_generic_string)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_enhanced_fast_string)
-	CFI_STARTPROC
 	ASM_STAC
 	movl %edx,%ecx
 1:	rep
@@ -240,7 +228,6 @@ ENTRY(copy_user_enhanced_fast_string)
 	.previous
 
 	_ASM_EXTABLE(1b,12b)
-	CFI_ENDPROC
 ENDPROC(copy_user_enhanced_fast_string)
 
 /*
@@ -248,7 +235,6 @@ ENDPROC(copy_user_enhanced_fast_string)
  * This will force destination/source out of cache for more performance.
  */
 ENTRY(__copy_user_nocache)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
@@ -332,5 +318,4 @@ ENTRY(__copy_user_nocache)
 	_ASM_EXTABLE(19b,40b)
 	_ASM_EXTABLE(21b,50b)
 	_ASM_EXTABLE(22b,50b)
-	CFI_ENDPROC
 ENDPROC(__copy_user_nocache)
diff --git a/arch/x86/lib/csum-copy_64.S b/arch/x86/lib/csum-copy_64.S
index 9734182966f3..7e48807b2fa1 100644
--- a/arch/x86/lib/csum-copy_64.S
+++ b/arch/x86/lib/csum-copy_64.S
@@ -6,7 +6,6 @@
  * for more details. No warranty for anything given at all.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
 
@@ -47,23 +46,16 @@
 
 
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
 	cmpl	$3*64, %edx
 	jle	.Lignore
 
 .Lignore:
 	subq  $7*8, %rsp
-	CFI_ADJUST_CFA_OFFSET 7*8
 	movq  %rbx, 2*8(%rsp)
-	CFI_REL_OFFSET rbx, 2*8
 	movq  %r12, 3*8(%rsp)
-	CFI_REL_OFFSET r12, 3*8
 	movq  %r14, 4*8(%rsp)
-	CFI_REL_OFFSET r14, 4*8
 	movq  %r13, 5*8(%rsp)
-	CFI_REL_OFFSET r13, 5*8
 	movq  %rbp, 6*8(%rsp)
-	CFI_REL_OFFSET rbp, 6*8
 
 	movq  %r8, (%rsp)
 	movq  %r9, 1*8(%rsp)
@@ -206,22 +198,14 @@ ENTRY(csum_partial_copy_generic)
 	addl %ebx, %eax
 	adcl %r9d, %eax		/* carry */
 
-	CFI_REMEMBER_STATE
 .Lende:
 	movq 2*8(%rsp), %rbx
-	CFI_RESTORE rbx
 	movq 3*8(%rsp), %r12
-	CFI_RESTORE r12
 	movq 4*8(%rsp), %r14
-	CFI_RESTORE r14
 	movq 5*8(%rsp), %r13
-	CFI_RESTORE r13
 	movq 6*8(%rsp), %rbp
-	CFI_RESTORE rbp
 	addq $7*8, %rsp
-	CFI_ADJUST_CFA_OFFSET -7*8
 	ret
-	CFI_RESTORE_STATE
 
 	/* Exception handlers. Very simple, zeroing is done in the wrappers */
 .Lbad_source:
@@ -237,5 +221,4 @@ ENTRY(csum_partial_copy_generic)
 	jz   .Lende
 	movl $-EFAULT, (%rax)
 	jmp .Lende
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index a4512359656a..46668cda4ffd 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -26,7 +26,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/page_types.h>
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
@@ -36,7 +35,6 @@
 
 	.text
 ENTRY(__get_user_1)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
@@ -45,11 +43,9 @@ ENTRY(__get_user_1)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-	CFI_STARTPROC
 	add $1,%_ASM_AX
 	jc bad_get_user
 	GET_THREAD_INFO(%_ASM_DX)
@@ -60,11 +56,9 @@ ENTRY(__get_user_2)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-	CFI_STARTPROC
 	add $3,%_ASM_AX
 	jc bad_get_user
 	GET_THREAD_INFO(%_ASM_DX)
@@ -75,11 +69,9 @@ ENTRY(__get_user_4)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_4)
 
 ENTRY(__get_user_8)
-	CFI_STARTPROC
 #ifdef CONFIG_X86_64
 	add $7,%_ASM_AX
 	jc bad_get_user
@@ -104,28 +96,23 @@ ENTRY(__get_user_8)
 	ASM_CLAC
 	ret
 #endif
-	CFI_ENDPROC
 ENDPROC(__get_user_8)
 
 
 bad_get_user:
-	CFI_STARTPROC
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 END(bad_get_user)
 
 #ifdef CONFIG_X86_32
 bad_get_user_8:
-	CFI_STARTPROC
 	xor %edx,%edx
 	xor %ecx,%ecx
 	mov $(-EFAULT),%_ASM_AX
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 END(bad_get_user_8)
 #endif
 
diff --git a/arch/x86/lib/iomap_copy_64.S b/arch/x86/lib/iomap_copy_64.S
index 05a95e713da8..33147fef3452 100644
--- a/arch/x86/lib/iomap_copy_64.S
+++ b/arch/x86/lib/iomap_copy_64.S
@@ -16,15 +16,12 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 /*
  * override generic version in lib/iomap_copy.c
  */
 ENTRY(__iowrite32_copy)
-	CFI_STARTPROC
 	movl %edx,%ecx
 	rep movsd
 	ret
-	CFI_ENDPROC
 ENDPROC(__iowrite32_copy)
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index b046664f5a1c..16698bba87de 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -2,7 +2,6 @@
 
 #include <linux/linkage.h>
 #include <asm/cpufeature.h>
-#include <asm/dwarf2.h>
 #include <asm/alternative-asm.h>
 
 /*
@@ -53,7 +52,6 @@ ENTRY(memcpy_erms)
 ENDPROC(memcpy_erms)
 
 ENTRY(memcpy_orig)
-	CFI_STARTPROC
 	movq %rdi, %rax
 
 	cmpq $0x20, %rdx
@@ -178,5 +176,4 @@ ENTRY(memcpy_orig)
 
 .Lend:
 	retq
-	CFI_ENDPROC
 ENDPROC(memcpy_orig)
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 0f8a0d0331b9..ca2afdd6d98e 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -6,7 +6,6 @@
  *	- Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -27,7 +26,6 @@
 
 ENTRY(memmove)
 ENTRY(__memmove)
-	CFI_STARTPROC
 
 	/* Handle more 32 bytes in loop */
 	mov %rdi, %rax
@@ -207,6 +205,5 @@ ENTRY(__memmove)
 	movb %r11b, (%rdi)
 13:
 	retq
-	CFI_ENDPROC
 ENDPROC(__memmove)
 ENDPROC(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 93118fb23976..2661fad05827 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -1,7 +1,6 @@
 /* Copyright 2002 Andi Kleen, SuSE Labs */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -66,7 +65,6 @@ ENTRY(memset_erms)
 ENDPROC(memset_erms)
 
 ENTRY(memset_orig)
-	CFI_STARTPROC
 	movq %rdi,%r10
 
 	/* expand byte value  */
@@ -78,7 +76,6 @@ ENTRY(memset_orig)
 	movl  %edi,%r9d
 	andl  $7,%r9d
 	jnz  .Lbad_alignment
-	CFI_REMEMBER_STATE
 .Lafter_bad_alignment:
 
 	movq  %rdx,%rcx
@@ -128,7 +125,6 @@ ENTRY(memset_orig)
 	movq	%r10,%rax
 	ret
 
-	CFI_RESTORE_STATE
 .Lbad_alignment:
 	cmpq $7,%rdx
 	jbe	.Lhandle_7
@@ -139,5 +135,4 @@ ENTRY(memset_orig)
 	subq %r8,%rdx
 	jmp .Lafter_bad_alignment
 .Lfinal:
-	CFI_ENDPROC
 ENDPROC(memset_orig)
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 3ca5218fbece..c81556409bbb 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -1,6 +1,5 @@
 #include <linux/linkage.h>
 #include <linux/errno.h>
-#include <asm/dwarf2.h>
 #include <asm/asm.h>
 #include <asm/msr.h>
 
@@ -13,9 +12,8 @@
  */
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
-	CFI_STARTPROC
-	pushq_cfi_reg rbx
-	pushq_cfi_reg rbp
+	pushq %rbx
+	pushq %rbp
 	movq	%rdi, %r10	/* Save pointer */
 	xorl	%r11d, %r11d	/* Return value */
 	movl    (%rdi), %eax
@@ -25,7 +23,6 @@ ENTRY(\op\()_safe_regs)
 	movl    20(%rdi), %ebp
 	movl    24(%rdi), %esi
 	movl    28(%rdi), %edi
-	CFI_REMEMBER_STATE
 1:	\op
 2:	movl    %eax, (%r10)
 	movl	%r11d, %eax	/* Return value */
@@ -35,16 +32,14 @@ ENTRY(\op\()_safe_regs)
 	movl    %ebp, 20(%r10)
 	movl    %esi, 24(%r10)
 	movl    %edi, 28(%r10)
-	popq_cfi_reg rbp
-	popq_cfi_reg rbx
+	popq %rbp
+	popq %rbx
 	ret
 3:
-	CFI_RESTORE_STATE
 	movl    $-EIO, %r11d
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-	CFI_ENDPROC
 ENDPROC(\op\()_safe_regs)
 .endm
 
@@ -52,13 +47,12 @@ ENDPROC(\op\()_safe_regs)
 
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
-	pushl_cfi_reg ebp
-	pushl_cfi_reg esi
-	pushl_cfi_reg edi
-	pushl_cfi $0              /* Return value */
-	pushl_cfi %eax
+	pushl %ebx
+	pushl %ebp
+	pushl %esi
+	pushl %edi
+	pushl $0              /* Return value */
+	pushl %eax
 	movl    4(%eax), %ecx
 	movl    8(%eax), %edx
 	movl    12(%eax), %ebx
@@ -66,32 +60,28 @@ ENTRY(\op\()_safe_regs)
 	movl    24(%eax), %esi
 	movl    28(%eax), %edi
 	movl    (%eax), %eax
-	CFI_REMEMBER_STATE
 1:	\op
-2:	pushl_cfi %eax
+2:	pushl %eax
 	movl    4(%esp), %eax
-	popl_cfi (%eax)
+	popl (%eax)
 	addl    $4, %esp
-	CFI_ADJUST_CFA_OFFSET -4
 	movl    %ecx, 4(%eax)
 	movl    %edx, 8(%eax)
 	movl    %ebx, 12(%eax)
 	movl    %ebp, 20(%eax)
 	movl    %esi, 24(%eax)
 	movl    %edi, 28(%eax)
-	popl_cfi %eax
-	popl_cfi_reg edi
-	popl_cfi_reg esi
-	popl_cfi_reg ebp
-	popl_cfi_reg ebx
+	popl %eax
+	popl %edi
+	popl %esi
+	popl %ebp
+	popl %ebx
 	ret
 3:
-	CFI_RESTORE_STATE
 	movl    $-EIO, 4(%esp)
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-	CFI_ENDPROC
 ENDPROC(\op\()_safe_regs)
 .endm
 
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index fc6ba17a7eec..e0817a12d323 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -11,7 +11,6 @@
  * return value.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
@@ -30,11 +29,9 @@
  * as they get called from within inline assembly.
  */
 
-#define ENTER	CFI_STARTPROC ; \
-		GET_THREAD_INFO(%_ASM_BX)
+#define ENTER	GET_THREAD_INFO(%_ASM_BX)
 #define EXIT	ASM_CLAC ;	\
-		ret ;		\
-		CFI_ENDPROC
+		ret
 
 .text
 ENTRY(__put_user_1)
@@ -87,7 +84,6 @@ ENTRY(__put_user_8)
 ENDPROC(__put_user_8)
 
 bad_put_user:
-	CFI_STARTPROC
 	movl $-EFAULT,%eax
 	EXIT
 END(bad_put_user)
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 2322abe4da3b..40027db99140 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -15,7 +15,6 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 #define __ASM_HALF_REG(reg)	__ASM_SEL(reg, e##reg)
 #define __ASM_HALF_SIZE(inst)	__ASM_SEL(inst##w, inst##l)
@@ -34,10 +33,10 @@
  */
 
 #define save_common_regs \
-	pushl_cfi_reg ecx
+	pushl %ecx
 
 #define restore_common_regs \
-	popl_cfi_reg ecx
+	popl %ecx
 
 	/* Avoid uglifying the argument copying x86-64 needs to do. */
 	.macro movq src, dst
@@ -64,50 +63,45 @@
  */
 
 #define save_common_regs \
-	pushq_cfi_reg rdi; \
-	pushq_cfi_reg rsi; \
-	pushq_cfi_reg rcx; \
-	pushq_cfi_reg r8;  \
-	pushq_cfi_reg r9;  \
-	pushq_cfi_reg r10; \
-	pushq_cfi_reg r11
+	pushq %rdi; \
+	pushq %rsi; \
+	pushq %rcx; \
+	pushq %r8;  \
+	pushq %r9;  \
+	pushq %r10; \
+	pushq %r11
 
 #define restore_common_regs \
-	popq_cfi_reg r11; \
-	popq_cfi_reg r10; \
-	popq_cfi_reg r9; \
-	popq_cfi_reg r8; \
-	popq_cfi_reg rcx; \
-	popq_cfi_reg rsi; \
-	popq_cfi_reg rdi
+	popq %r11; \
+	popq %r10; \
+	popq %r9; \
+	popq %r8; \
+	popq %rcx; \
+	popq %rsi; \
+	popq %rdi
 
 #endif
 
 /* Fix up special calling conventions */
 ENTRY(call_rwsem_down_read_failed)
-	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_down_read_failed
-	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_down_read_failed)
 
 ENTRY(call_rwsem_down_write_failed)
-	CFI_STARTPROC
 	save_common_regs
 	movq %rax,%rdi
 	call rwsem_down_write_failed
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_down_write_failed)
 
 ENTRY(call_rwsem_wake)
-	CFI_STARTPROC
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
 	jnz 1f
@@ -116,17 +110,14 @@ ENTRY(call_rwsem_wake)
 	call rwsem_wake
 	restore_common_regs
 1:	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_wake)
 
 ENTRY(call_rwsem_downgrade_wake)
-	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_downgrade_wake
-	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_downgrade_wake)
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 6440221ced0d..4093216b3791 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -8,7 +8,6 @@
  * of the License.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 /*
  * Calling convention :
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
index acb384d24669..a8fecc226946 100644
--- a/arch/x86/um/Makefile
+++ b/arch/x86/um/Makefile
@@ -26,7 +26,7 @@ else
 
 obj-y += syscalls_64.o vdso/
 
-subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../lib/thunk_64.o \
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o \
 		../lib/rwsem.o
 
 endif
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 04529e620559..f22667abf7b9 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -114,7 +114,7 @@ RELOC(xen_sysret32, 1b+1)
 /* Normal 64-bit system call target */
 ENTRY(xen_syscall_target)
 	undo_xen_syscall
-	jmp system_call_after_swapgs
+	jmp entry_SYSCALL_64_after_swapgs
 ENDPROC(xen_syscall_target)
 
 #ifdef CONFIG_IA32_EMULATION
@@ -122,13 +122,13 @@ ENDPROC(xen_syscall_target)
 /* 32-bit compat syscall target */
 ENTRY(xen_syscall32_target)
 	undo_xen_syscall
-	jmp ia32_cstar_target
+	jmp entry_SYSCALL_compat
 ENDPROC(xen_syscall32_target)
 
 /* 32-bit compat sysenter target */
 ENTRY(xen_sysenter_target)
 	undo_xen_syscall
-	jmp ia32_sysenter_target
+	jmp entry_SYSENTER_compat
 ENDPROC(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 5b3add31f9f1..2c9082ba6137 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -212,5 +212,5 @@ EOF
     )
 }
 
-(ignore_list && syscall_list $(dirname $0)/../arch/x86/syscalls/syscall_32.tbl) | \
+(ignore_list && syscall_list $(dirname $0)/../arch/x86/entry/syscalls/syscall_32.tbl) | \
 $* -E -x c - > /dev/null