diff options
| author | Théo Lebrun <theo.lebrun@bootlin.com> | 2023-12-07 18:56:12 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-12-15 14:24:12 +0100 |
| commit | 8ff87406c29b43fa0d807ce80601c94821cab9bc (patch) | |
| tree | 0005e04d32b2424fd2a04ed11c0c330b6cf05f45 | |
| parent | 826bd77ae5e8fec91a5fddb189adbdbaef3050ef (diff) | |
tty: serial: amba-pl011: unindent pl011_console_get_options function body
The whole function body is encapsulated inside an if-condition. Reverse
the if logic and early return to remove one indentation level.
Also turn two nested ifs into a single one at the end of the function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-7-e384afa5e78c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 43 |
1 files changed, 21 insertions, 22 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e15bfac5352d..8e129c58c44b 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2363,35 +2363,34 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) static void pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, ibrd, fbrd; + unsigned int lcr_h, ibrd, fbrd; - lcr_h = pl011_read(uap, REG_LCRH_TX); + if (!(pl011_read(uap, REG_CR) & UART01x_CR_UARTEN)) + return; - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } + lcr_h = pl011_read(uap, REG_LCRH_TX); - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; else - *bits = 8; + *parity = 'o'; + } - ibrd = pl011_read(uap, REG_IBRD); - fbrd = pl011_read(uap, REG_FBRD); + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; - *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); - if (uap->vendor->oversampling) { - if (pl011_read(uap, REG_CR) - & ST_UART011_CR_OVSFACT) - *baud *= 2; - } - } + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + + if (uap->vendor->oversampling && + (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT)) + *baud *= 2; } static int pl011_console_setup(struct console *co, char *options) |