arm64: dts: qcom: sdm845: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-12-dmitry.baryshkov@linaro.org

9 files changed, 314 insertions, 314 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index d05c511718df..1ce413263b7f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -636,25 +636,6 @@
 	};
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
 edp_brij_i2c: &i2c3 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -687,7 +668,7 @@ edp_brij_i2c: &i2c3 {
 			port@0 {
 				reg = <0>;
 				sn65dsi86_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -767,6 +748,25 @@ ap_ts_i2c: &i2c14 {
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
 /*
  * Cheza fw does not properly program the GPU aperture to allow the
  * GPU to update the SMMU pagetables for context switches.  Work
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 0d79dbf60f46..d6b464cb61d6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -415,53 +415,6 @@
 	firmware-name = "qcom/sdm845/cdsp.mbn";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-	qcom,master-dsi;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l1a_0p875>;
-};
-
-&dsi1 {
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-
-	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-
-	status = "okay";
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi1_phy {
-	vdds-supply = <&vreg_l1a_0p875>;
-	status = "okay";
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -517,7 +470,7 @@
 				reg = <0>;
 
 				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -525,7 +478,7 @@
 				reg = <1>;
 
 				lt9611_b: endpoint {
-					remote-endpoint = <&dsi1_out>;
+					remote-endpoint = <&mdss_dsi1_out>;
 				};
 			};
 
@@ -556,6 +509,53 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l1a_0p875>;
+	status = "okay";
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index d1440b790fa6..b2d4336e764b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -417,7 +417,43 @@
 	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
-&dsi0 {
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 	vdda-supply = <&vdda_mipi_dsi0_1p2>;
 
@@ -448,33 +484,33 @@
 			port@0 {
 				reg = <0>;
 				truly_in_0: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
 			port@1 {
 				reg = <1>;
 				truly_in_1: endpoint {
-					remote-endpoint = <&dsi1_out>;
+					remote-endpoint = <&mdss_dsi1_out>;
 				};
 			};
 		};
 	};
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi0_pll>;
 };
 
-&dsi1 {
+&mdss_dsi1 {
 	status = "okay";
 	vdda-supply = <&vdda_mipi_dsi1_1p2>;
 
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 	ports {
 		port@1 {
@@ -486,47 +522,11 @@
 	};
 };
 
-&dsi1_phy {
+&mdss_dsi1_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi1_pll>;
 };
 
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			   <GCC_LPASS_Q6_AXI_CLK>,
-			   <GCC_LPASS_SWAY_CLK>;
-};
-
-&gmu {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/a630_zap.mbn";
-	};
-};
-
-&i2c10 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&ipa {
-	qcom,gsi-loader = "self";
-	memory-region = <&ipa_fw_mem>;
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 364adf416c4f..122c7128dea9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -336,44 +336,6 @@
 	firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	/*
-	 * Both devices use different panels but all other properties
-	 * are common. Compatible line is declared in device dts.
-	 */
-	display_panel: panel@0 {
-		status = "disabled";
-
-		reg = <0>;
-
-		vddio-supply = <&vreg_l14a_1p88>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 				<GCC_QSPI_CORE_CLK_SRC>,
@@ -452,6 +414,44 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	/*
+	 * Both devices use different panels but all other properties
+	 * are common. Compatible line is declared in device dts.
+	 */
+	display_panel: panel@0 {
+		status = "disabled";
+
+		reg = <0>;
+
+		vddio-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
 /* Modem/wifi */
 &mss_pil {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index f1cfe5a1d172..dce0141f3719 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -411,44 +411,6 @@
 	firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	panel@0 {
-		compatible = "visionox,rm69299-shift";
-		status = "okay";
-		reg = <0>;
-		vdda-supply = <&vreg_l14a_1p88>;
-		vdd3p3-supply = <&vreg_l28a_3p0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
-		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
-
-		port {
-			panel_in_0: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in_0>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -509,6 +471,44 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-shift";
+		status = "okay";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+		vdd3p3-supply = <&vreg_l28a_3p0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 420ffede3e80..3bc187a066ae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -368,43 +368,6 @@
 	status = "okay";
 };
 
-&dsi0 {
-	vdda-supply = <&vreg_l26a_1p2>;
-	status = "okay";
-
-	panel: panel@0 {
-		/* The compatible is assigned in device DTs. */
-		reg = <0>;
-
-		backlight = <&pmi8998_wled>;
-		vddio-supply = <&vreg_l14a_1p8>;
-		vsp-supply = <&lab>;
-		vsn-supply = <&ibb>;
-		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
-		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
-		pinctrl-names = "default", "sleep";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	vdds-supply = <&vreg_l1a_0p9>;
-	status = "okay";
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			<GCC_QSPI_CORE_CLK_SRC>,
@@ -515,6 +478,43 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* The compatible is assigned in device DTs. */
+		reg = <0>;
+
+		backlight = <&pmi8998_wled>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1a_0p9>;
+	status = "okay";
+};
+
 &pm8998_gpios {
 	focus_n: focus-n-state {
 		pins = "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index f7fd897afe1e..9d6faeb65624 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -231,39 +231,6 @@
 	firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	display_panel: panel@0 {
-		reg = <0>;
-		vddio-supply = <&vreg_l14a_1p8>;
-		vddpos-supply = <&lab>;
-		vddneg-supply = <&ibb>;
-
-		backlight = <&pmi8998_wled>;
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
-		status = "disabled";
-
-		port {
-			panel_in_0: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in_0>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l1a_0p875>;
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -306,6 +273,39 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		backlight = <&pmi8998_wled>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		status = "disabled";
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 576f0421824f..6db12abaa88d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -373,44 +373,6 @@
 	status = "okay";
 };
 
-&dsi0 {
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-	status = "okay";
-
-	display_panel: panel@0 {
-		compatible = "jdi,fhd-nt35596s";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-		vddio-supply = <&vreg_l14a_1p8>;
-		backlight = <&pmi8998_wled>;
-		vddpos-supply = <&lab>;
-		vddneg-supply = <&ibb>;
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&sde_dsi_active>;
-		pinctrl-1 = <&sde_dsi_suspend>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-	status = "okay";
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 				<GCC_QSPI_CORE_CLK_SRC>,
@@ -505,6 +467,44 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+	status = "okay";
+
+	display_panel: panel@0 {
+		compatible = "jdi,fhd-nt35596s";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		backlight = <&pmi8998_wled>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active>;
+		pinctrl-1 = <&sde_dsi_suspend>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
+
 &mss_pil {
 	firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cf5898b0c17f..723c87666680 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4501,14 +4501,14 @@
 					port@1 {
 						reg = <1>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
 					port@2 {
 						reg = <2>;
 						dpu_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
@@ -4608,7 +4608,7 @@
 				};
 			};
 
-			dsi0: dsi@ae94000 {
+			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sdm845-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -4630,12 +4630,12 @@
 					      "iface",
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				status = "disabled";
 
@@ -4648,20 +4648,20 @@
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi0_phy: phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -4680,7 +4680,7 @@
 				status = "disabled";
 			};
 
-			dsi1: dsi@ae96000 {
+			mdss_dsi1: dsi@ae96000 {
 				compatible = "qcom,sdm845-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
@@ -4702,12 +4702,12 @@
 					      "iface",
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
-				phys = <&dsi1_phy>;
+				phys = <&mdss_dsi1_phy>;
 
 				status = "disabled";
 
@@ -4720,20 +4720,20 @@
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 							remote-endpoint = <&dpu_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi1_phy: phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -4895,10 +4895,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&dsi0_phy 0>,
-				 <&dsi0_phy 1>,
-				 <&dsi1_phy 0>,
-				 <&dsi1_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
 				 <&dp_phy 0>,
 				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",