diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-11-17 14:06:25 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-11-17 14:06:25 -0800 |
| commit | 84368d882b9688bfac77ce48d33b1e20a4e4a787 (patch) | |
| tree | 2b522860c6a9ee8956630757c9628af62930e756 | |
| parent | ae75334011d3c9f8b859ecb5f63e17e72023051e (diff) | |
| parent | 0d6a10dc2b971cc3a192b47721ee8270afc2d104 (diff) | |
Merge tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of devicetree and code changes for SoC platforms, notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting which
RISC-V SoC specific patches will now get merged through the SoC
tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
like incorrect register sizes and schema warnings. One fix makes
the UFS controller work on sc8280xp, and six fixes address the same
regulator problem in a variety of platforms"
* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
MAINTAINERS: repair Microchip corei2c driver entry
MAINTAINERS: add an entry for StarFive devicetrees
MAINTAINERS: generify the Microchip RISC-V entry name
MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
MAINTAINERS: git://github.com -> https://github.com for HiSilicon
soc: imx8m: Enable OCOTP clock before reading the register
arm64: dts: imx93-pinfunc: drop execution permission
arm64: dts: imx8mn: Fix NAND controller size-cells
arm64: dts: imx8mm: Fix NAND controller size-cells
ARM: dts: imx7: Fix NAND controller size-cells
arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
ARM: dts: at91: sama7g5: fix signal name of pin PB2
arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
...
22 files changed, 171 insertions, 51 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 9afe57eea888..8ba29a308539 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2197,7 +2197,7 @@ M: Wei Xu <xuwei5@hisilicon.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported W: http://www.hisilicon.com -T: git git://github.com/hisilicon/linux-hisi.git +T: git https://github.com/hisilicon/linux-hisi.git F: arch/arm/boot/dts/hi3* F: arch/arm/boot/dts/hip* F: arch/arm/boot/dts/hisi* @@ -13625,6 +13625,12 @@ S: Supported F: drivers/misc/atmel-ssc.c F: include/linux/atmel-ssc.h +MICROCHIP SOC DRIVERS +M: Conor Dooley <conor@kernel.org> +S: Supported +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ +F: drivers/soc/microchip/ + MICROCHIP USB251XB DRIVER M: Richard Leitner <richard.leitner@skidata.com> L: linux-usb@vger.kernel.org @@ -17723,7 +17729,7 @@ F: arch/riscv/ N: riscv K: riscv -RISC-V/MICROCHIP POLARFIRE SOC SUPPORT +RISC-V MICROCHIP FPGA SUPPORT M: Conor Dooley <conor.dooley@microchip.com> M: Daire McNamara <daire.mcnamara@microchip.com> L: linux-riscv@lists.infradead.org @@ -17741,17 +17747,26 @@ F: Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml F: arch/riscv/boot/dts/microchip/ F: drivers/char/hw_random/mpfs-rng.c F: drivers/clk/microchip/clk-mpfs.c -F: drivers/i2c/busses/i2c-microchip-core.c +F: drivers/i2c/busses/i2c-microchip-corei2c.c F: drivers/mailbox/mailbox-mpfs.c F: drivers/pci/controller/pcie-microchip-host.c F: drivers/reset/reset-mpfs.c F: drivers/rtc/rtc-mpfs.c -F: drivers/soc/microchip/ +F: drivers/soc/microchip/mpfs-sys-controller.c F: drivers/spi/spi-microchip-core-qspi.c F: drivers/spi/spi-microchip-core.c F: drivers/usb/musb/mpfs.c F: include/soc/microchip/mpfs.h +RISC-V MISC SOC SUPPORT +M: Conor Dooley <conor@kernel.org> +L: linux-riscv@lists.infradead.org +S: Maintained +Q: https://patchwork.kernel.org/project/linux-riscv/list/ +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ +F: Documentation/devicetree/bindings/riscv/ +F: arch/riscv/boot/dts/ + RNBD BLOCK DRIVERS M: Md. Haris Iqbal <haris.iqbal@ionos.com> M: Jack Wang <jinpu.wang@ionos.com> @@ -18778,7 +18793,6 @@ M: Palmer Dabbelt <palmer@dabbelt.com> M: Paul Walmsley <paul.walmsley@sifive.com> L: linux-riscv@lists.infradead.org S: Supported -T: git https://github.com/sifive/riscv-linux.git N: sifive K: [^@]sifive @@ -18797,6 +18811,13 @@ S: Maintained F: Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml F: drivers/dma/sf-pdma/ +SIFIVE SOC DRIVERS +M: Conor Dooley <conor@kernel.org> +L: linux-riscv@lists.infradead.org +S: Maintained +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ +F: drivers/soc/sifive/ + SILEAD TOUCHSCREEN DRIVER M: Hans de Goede <hdegoede@redhat.com> L: linux-input@vger.kernel.org @@ -19598,6 +19619,11 @@ M: Ion Badulescu <ionut@badula.org> S: Odd Fixes F: drivers/net/ethernet/adaptec/starfire* +STARFIVE DEVICETREES +M: Emil Renner Berthing <kernel@esmil.dk> +S: Maintained +F: arch/riscv/boot/dts/starfive/ + STARFIVE JH7100 CLOCK DRIVERS M: Emil Renner Berthing <kernel@esmil.dk> S: Maintained diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0fc9e6b8b05d..03d2e8544a4e 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1270,10 +1270,10 @@ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index f4f054cdf2a8..3a3d76af8612 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -69,6 +69,12 @@ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; }; &can0 { @@ -118,6 +124,20 @@ status = "okay"; }; +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &switch { status = "okay"; }; diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h index 4eb30445d205..6e87f0d4b8fc 100644 --- a/arch/arm/boot/dts/sama7g5-pinfunc.h +++ b/arch/arm/boot/dts/sama7g5-pinfunc.h @@ -261,7 +261,7 @@ #define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1) #define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1) #define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1) -#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3) +#define PIN_PB2__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB2, 6, 3) #define PIN_PB3 35 #define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) #define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1) diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index ffed4d949042..e4904faf1753 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -169,10 +169,15 @@ sr_ena_2: cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW bne sr_ena_2 - /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ + /* Disable DX DLLs for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 + /* Do not soft reset the AC DLL. */ + ldr tmp1, [r3, DDR3PHY_ACDLLCR] + bic tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST + str tmp1, [r3, DDR3PHY_ACDLLCR] + /* Disable DX DLLs. */ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 7e0aeb2db305..a0aeac619929 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -34,11 +34,25 @@ off-on-delay-us = <12000>; }; - extcon_usbotg1: extcon-usbotg1 { - compatible = "linux,extcon-usb-gpio"; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X19"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_extcon>; - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_usb1_connector>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; }; }; @@ -105,13 +119,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; - extcon = <&extcon_usbotg1>; srp-disable; hnp-disable; adp-disable; power-active-high; over-current-active-low; + usb-role-switch; status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; &usbotg2 { @@ -231,7 +251,7 @@ <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>; }; - pinctrl_usb1_extcon: usb1-extcongrp { + pinctrl_usb1_connector: usb1-connectorgrp { fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index dabd94dc30c4..50ef92915c67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1244,10 +1244,10 @@ clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index ad0b99adf691..67b554ba690c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -1102,7 +1102,7 @@ gpmi: nand-controller@33002000 { compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h index 4298a145f8a9..4298a145f8a9 100755..100644 --- a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a47acf9bdf24..a721cdd80489 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -668,7 +668,7 @@ apcs_glb: mailbox@b111000 { compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0x6000>; + reg = <0x0b111000 0x1000>; #clock-cells = <1>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c0a2baffa49d..aba717644391 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3504,7 +3504,7 @@ }; saw3: syscon@9a10000 { - compatible = "qcom,tcsr-msm8996", "syscon"; + compatible = "syscon"; reg = <0x09a10000 0x1000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 87ab0e1ecd16..4dee790f1049 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -43,7 +43,6 @@ regulator-always-on; regulator-boot-on; - regulator-allow-set-load; vin-supply = <&vreg_3p3>; }; @@ -137,6 +136,9 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a_1p8: ldo7 { @@ -152,6 +154,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a_0p8: ldo11 { @@ -258,6 +263,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_1p8: ldo7 { @@ -273,6 +281,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index b608b82dff03..2c62ba6a49c5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -83,6 +83,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { @@ -98,6 +101,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { @@ -113,6 +119,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l17c: ldo17 { @@ -121,6 +130,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 212580316d3e..4cdc88d33944 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2296,7 +2296,8 @@ lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; - reg = <0 0x03300000 0 0x30000>; + reg = <0 0x03300000 0 0x30000>, + <0 0x032a9000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..5e30349efd20 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -124,6 +124,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { @@ -146,6 +149,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4d: ldo4 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c32bcded2aef..212d63d5cbf2 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -885,13 +885,13 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges; clock-names = "ref", "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, + clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; resets = <&ufs_mem_hc 0>; @@ -953,13 +953,13 @@ ufs_card_phy: phy@1da7000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01da7000 0 0xe10>; + reg = <0 0x01da7000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges; clock-names = "ref", "ref_aux"; - clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; resets = <&ufs_card_hc 0>; @@ -1181,26 +1181,16 @@ usb_0_ssphy: usb3-phy@88eb400 { reg = <0 0x088eb400 0 0x100>, <0 0x088eb600 0 0x3ec>, - <0 0x088ec400 0 0x1f0>, + <0 0x088ec400 0 0x364>, <0 0x088eba00 0 0x100>, <0 0x088ebc00 0 0x3ec>, - <0 0x088ec700 0 0x64>; + <0 0x088ec200 0 0x18>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb0_phy_pipe_clk_src"; }; - - usb_0_dpphy: dp-phy@88ed200 { - reg = <0 0x088ed200 0 0x200>, - <0 0x088ed400 0 0x200>, - <0 0x088eda00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; usb_1_hsphy: phy@8902000 { @@ -1242,8 +1232,8 @@ usb_1_ssphy: usb3-phy@8903400 { reg = <0 0x08903400 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904400 0 0x1f0>, + <0 0x08903600 0 0x3ec>, + <0 0x08904400 0 0x364>, <0 0x08903a00 0 0x100>, <0 0x08903c00 0 0x3ec>, <0 0x08904200 0 0x18>; @@ -1253,16 +1243,6 @@ clock-names = "pipe0"; clock-output-names = "usb1_phy_pipe_clk_src"; }; - - usb_1_dpphy: dp-phy@8904200 { - reg = <0 0x08904200 0 0x200>, - <0 0x08904400 0 0x200>, - <0 0x08904a00 0 0x200>, - <0 0x08904600 0 0x200>, - <0 0x08904800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; system-cache-controller@9200000 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 014fe3a31548..fb6e5a140c9f 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -348,6 +348,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { @@ -367,6 +370,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 549e0a2aa9fe..5428aab3058d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -317,6 +317,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_2p85: ldo7 { @@ -339,6 +342,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index a5b62cadb129..e276eed1f8e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -334,6 +334,7 @@ exit-latency-us = <6562>; min-residency-us = <9987>; local-timer-stop; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 0fcf5bd88fc7..69ae6503c2f6 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -107,6 +107,9 @@ regulator-max-microvolt = <888000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { @@ -115,6 +118,9 @@ regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p96: ldo7 { @@ -123,6 +129,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { @@ -131,6 +140,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c index cc57a384d74d..28144c699b0c 100644 --- a/drivers/soc/imx/soc-imx8m.c +++ b/drivers/soc/imx/soc-imx8m.c @@ -11,6 +11,7 @@ #include <linux/platform_device.h> #include <linux/arm-smccc.h> #include <linux/of.h> +#include <linux/clk.h> #define REV_B1 0x21 @@ -56,6 +57,7 @@ static u32 __init imx8mq_soc_revision(void) void __iomem *ocotp_base; u32 magic; u32 rev; + struct clk *clk; np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp"); if (!np) @@ -63,6 +65,13 @@ static u32 __init imx8mq_soc_revision(void) ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); + clk = of_clk_get_by_name(np, NULL); + if (!clk) { + WARN_ON(!clk); + return 0; + } + + clk_prepare_enable(clk); /* * SOC revision on older imx8mq is not available in fuses so query @@ -79,6 +88,8 @@ static u32 __init imx8mq_soc_revision(void) soc_uid <<= 32; soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW); + clk_disable_unprepare(clk); + clk_put(clk); iounmap(ocotp_base); of_node_put(np); diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h index 6ce3bd22f6c6..5ad7ac2e3a7c 100644 --- a/include/soc/at91/sama7-ddr.h +++ b/include/soc/at91/sama7-ddr.h @@ -26,7 +26,10 @@ #define DDR3PHY_PGSR (0x0C) /* DDR3PHY PHY General Status Register */ #define DDR3PHY_PGSR_IDONE (1 << 0) /* Initialization Done */ -#define DDR3PHY_ACIOCR (0x24) /* DDR3PHY AC I/O Configuration Register */ +#define DDR3PHY_ACDLLCR (0x14) /* DDR3PHY AC DLL Control Register */ +#define DDR3PHY_ACDLLCR_DLLSRST (1 << 30) /* DLL Soft Reset */ + +#define DDR3PHY_ACIOCR (0x24) /* DDR3PHY AC I/O Configuration Register */ #define DDR3PHY_ACIOCR_CSPDD_CS0 (1 << 18) /* CS#[0] Power Down Driver */ #define DDR3PHY_ACIOCR_CKPDD_CK0 (1 << 8) /* CK[0] Power Down Driver */ #define DDR3PHY_ACIORC_ACPDD (1 << 3) /* AC Power Down Driver */ |