Merge tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

46 files changed, 550 insertions, 316 deletions

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 0aa9e7d697a5..25dbd8c7aec7 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -239,6 +239,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	if (ifp->desc.bNumEndpoints >= num_ep)
 		goto skip_to_next_endpoint_or_interface_descriptor;
 
+	/* Check for duplicate endpoint addresses */
+	for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+		if (ifp->endpoint[i].desc.bEndpointAddress ==
+		    d->bEndpointAddress) {
+			dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+			    cfgno, inum, asnum, d->bEndpointAddress);
+			goto skip_to_next_endpoint_or_interface_descriptor;
+		}
+	}
+
 	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
 	++ifp->desc.bNumEndpoints;
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1fa5c0f29c64..a56c75e09786 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
-					  struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
@@ -903,34 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
 }
 
 /*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
-	struct usb_port *port_dev = hub->ports[port1 - 1];
-	struct usb_device *hdev = hub->hdev;
-	int ret = 0;
-
-	if (!hub->error) {
-		if (hub_is_superspeed(hub->hdev)) {
-			hub_usb3_port_prepare_disable(hub, port_dev);
-			ret = hub_set_port_link_state(hub, port_dev->portnum,
-						      USB_SS_PORT_LS_U3);
-		} else {
-			ret = usb_clear_port_feature(hdev, port1,
-					USB_PORT_FEAT_ENABLE);
-		}
-	}
-	if (port_dev->child && set_state)
-		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
-	if (ret && ret != -ENODEV)
-		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
-	return ret;
-}
-
-/*
  * Disable a port and mark a logical connect-change event, so that some
  * time later hub_wq will disconnect() any existing usb_device on the port
  * and will re-enumerate if there actually is a device attached.
@@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
 
 #endif	/* CONFIG_PM */
 
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+	int ret = 0;
+
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev)) {
+			hub_usb3_port_prepare_disable(hub, port_dev);
+			ret = hub_set_port_link_state(hub, port_dev->portnum,
+						      USB_SS_PORT_LS_U3);
+		} else {
+			ret = usb_clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+		}
+	}
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+	if (ret && ret != -ENODEV)
+		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+	return ret;
+}
+
 
 /* USB 2.0 spec, 7.1.7.3 / fig 7-29:
  *
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index b95930f20d90..c55db4aa54d6 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3753,7 +3753,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 		hs_ep->desc_list = dma_alloc_coherent(hsotg->dev,
 			MAX_DMA_DESC_NUM_GENERIC *
 			sizeof(struct dwc2_dma_desc),
-			&hs_ep->desc_list_dma, GFP_KERNEL);
+			&hs_ep->desc_list_dma, GFP_ATOMIC);
 		if (!hs_ep->desc_list) {
 			ret = -ENOMEM;
 			goto error2;
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a786256535b6..11fe68a4627b 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -247,8 +247,6 @@ MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
 static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
 				     char *property, u8 size, u64 *value)
 {
-	u8 val8;
-	u16 val16;
 	u32 val32;
 
 	switch (size) {
@@ -256,17 +254,7 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
 		*value = device_property_read_bool(hsotg->dev, property);
 		break;
 	case 1:
-		if (device_property_read_u8(hsotg->dev, property, &val8))
-			return;
-
-		*value = val8;
-		break;
 	case 2:
-		if (device_property_read_u16(hsotg->dev, property, &val16))
-			return;
-
-		*value = val16;
-		break;
 	case 4:
 		if (device_property_read_u32(hsotg->dev, property, &val32))
 			return;
@@ -1100,13 +1088,13 @@ static void dwc2_set_gadget_dma(struct dwc2_hsotg *hsotg)
 	/* Buffer DMA */
 	dwc2_set_param_bool(hsotg, &p->g_dma,
 			    false, "gadget-dma",
-			    true, false,
+			    dma_capable, false,
 			    dma_capable);
 
 	/* DMA Descriptor */
 	dwc2_set_param_bool(hsotg, &p->g_dma_desc, false,
 			    "gadget-dma-desc",
-			    p->g_dma, false,
+			    !!hw->dma_desc_enable, false,
 			    !!hw->dma_desc_enable);
 }
 
@@ -1130,8 +1118,14 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 
 		dwc2_set_param_bool(hsotg, &p->host_dma,
 				    false, "host-dma",
-				    true, false,
+				    dma_capable, false,
 				    dma_capable);
+		dwc2_set_param_host_rx_fifo_size(hsotg,
+				params->host_rx_fifo_size);
+		dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+				params->host_nperio_tx_fifo_size);
+		dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+				params->host_perio_tx_fifo_size);
 	}
 	dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
 	dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
@@ -1140,12 +1134,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 			params->host_support_fs_ls_low_power);
 	dwc2_set_param_enable_dynamic_fifo(hsotg,
 			params->enable_dynamic_fifo);
-	dwc2_set_param_host_rx_fifo_size(hsotg,
-			params->host_rx_fifo_size);
-	dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
-			params->host_nperio_tx_fifo_size);
-	dwc2_set_param_host_perio_tx_fifo_size(hsotg,
-			params->host_perio_tx_fifo_size);
 	dwc2_set_param_max_transfer_size(hsotg,
 			params->max_transfer_size);
 	dwc2_set_param_max_packet_count(hsotg,
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index de5a8570be04..14b760209680 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -45,9 +45,7 @@
 #define DWC3_XHCI_RESOURCES_NUM	2
 
 #define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE		4	/* bytes */
-#define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE	4096
 #define DWC3_EVENT_TYPE_MASK	0xfe
 
 #define DWC3_EVENT_TYPE_DEV	0
@@ -311,9 +309,8 @@
 #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0)  /* DWC_usb31 only */
 #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 #define DWC3_DCFG_HIGHSPEED	(0 << 0)
-#define DWC3_DCFG_FULLSPEED2	(1 << 0)
+#define DWC3_DCFG_FULLSPEED	(1 << 0)
 #define DWC3_DCFG_LOWSPEED	(2 << 0)
-#define DWC3_DCFG_FULLSPEED1	(3 << 0)
 
 #define DWC3_DCFG_NUMP_SHIFT	17
 #define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
@@ -405,9 +402,8 @@
 #define DWC3_DSTS_SUPERSPEED_PLUS	(5 << 0) /* DWC_usb31 only */
 #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 #define DWC3_DSTS_HIGHSPEED		(0 << 0)
-#define DWC3_DSTS_FULLSPEED2		(1 << 0)
+#define DWC3_DSTS_FULLSPEED		(1 << 0)
 #define DWC3_DSTS_LOWSPEED		(2 << 0)
-#define DWC3_DSTS_FULLSPEED1		(3 << 0)
 
 /* Device Generic Command Register */
 #define DWC3_DGCMD_SET_LMP		0x01
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 29e80cc9b634..eb1b9cb3f9d1 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
@@ -510,7 +511,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+	irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
 	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
 					dwc3_omap_interrupt_thread, IRQF_SHARED,
 					"dwc3-omap", omap);
@@ -531,7 +532,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	dwc3_omap_enable_irqs(omap);
-
+	enable_irq(omap->irq);
 	return 0;
 
 err2:
@@ -552,6 +553,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
 	extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
 	dwc3_omap_disable_irqs(omap);
+	disable_irq(omap->irq);
 	of_platform_depopulate(omap->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 2b73339f286b..cce0a220b6b0 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -38,6 +38,7 @@
 #define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
 #define PCI_DEVICE_ID_INTEL_APL			0x5aaa
 #define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK			0x31aa
 
 #define PCI_INTEL_BXT_DSM_UUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
 #define PCI_INTEL_BXT_FUNC_PMU_PWR	4
@@ -73,16 +74,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 {
 	struct platform_device		*dwc3 = dwc->dwc3;
 	struct pci_dev			*pdev = dwc->pci;
-	int				ret;
-
-	struct property_entry sysdev_property[] = {
-		PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
-		{ },
-	};
-
-	ret = platform_device_add_properties(dwc3, sysdev_property);
-	if (ret)
-		return ret;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
@@ -105,6 +96,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -115,7 +107,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 		int ret;
 
 		struct property_entry properties[] = {
-			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+			PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ }
 		};
 
@@ -167,6 +160,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
 			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
 			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -274,6 +268,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
 	{  }	/* Terminating Entry */
 };
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4878d187c7d4..9bb1f8526f3e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -39,18 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		struct dwc3_ep *dep, struct dwc3_request *req);
 
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
-		u32 len, u32 type, bool chain)
+static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
 {
-	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_trb			*trb;
 	struct dwc3_ep			*dep;
 
-	int				ret;
-
 	dep = dwc->eps[epnum];
-	if (dep->flags & DWC3_EP_BUSY)
-		return 0;
 
 	trb = &dwc->ep0_trb[dep->trb_enqueue];
 
@@ -71,15 +66,23 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 		trb->ctrl |= (DWC3_TRB_CTRL_IOC
 				| DWC3_TRB_CTRL_LST);
 
-	if (chain)
+	trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_ep			*dep;
+	int				ret;
+
+	dep = dwc->eps[epnum];
+	if (dep->flags & DWC3_EP_BUSY)
 		return 0;
 
 	memset(&params, 0, sizeof(params));
 	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
 	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
 
-	trace_dwc3_prepare_trb(dep, trb);
-
 	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0)
 		return ret;
@@ -280,8 +283,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
 
 	complete(&dwc->ep0_in_setup);
 
-	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+	dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
 			DWC3_TRBCTL_CONTROL_SETUP, false);
+	ret = dwc3_ep0_start_trans(dwc, 0);
 	WARN_ON(ret < 0);
 }
 
@@ -912,9 +916,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 			dwc->ep0_next_event = DWC3_EP0_COMPLETE;
 
-			ret = dwc3_ep0_start_trans(dwc, epnum,
-					dwc->ctrl_req_addr, 0,
-					DWC3_TRBCTL_CONTROL_DATA, false);
+			dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
+					0, DWC3_TRBCTL_CONTROL_DATA, false);
+			ret = dwc3_ep0_start_trans(dwc, epnum);
 			WARN_ON(ret < 0);
 		}
 	}
@@ -993,9 +997,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 	req->direction = !!dep->number;
 
 	if (req->request.length == 0) {
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ctrl_req_addr, 0,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
 		u32	transfer_size = 0;
@@ -1011,7 +1016,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
 			transfer_size = ALIGN(req->request.length - maxpacket,
 					      maxpacket);
-			ret = dwc3_ep0_start_trans(dwc, dep->number,
+			dwc3_ep0_prepare_one_trb(dwc, dep->number,
 						   req->request.dma,
 						   transfer_size,
 						   DWC3_TRBCTL_CONTROL_DATA,
@@ -1023,18 +1028,20 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
 		dwc->ep0_bounced = true;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ep0_bounce_addr, transfer_size,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else {
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
 		if (ret)
 			return;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	}
 
 	WARN_ON(ret < 0);
@@ -1048,8 +1055,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
 	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
 		: DWC3_TRBCTL_CONTROL_STATUS2;
 
-	return dwc3_ep0_start_trans(dwc, dep->number,
+	dwc3_ep0_prepare_one_trb(dwc, dep->number,
 			dwc->ctrl_req_addr, 0, type, false);
+	return dwc3_ep0_start_trans(dwc, dep->number);
 }
 
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index efddaf5d11d1..204c754cc647 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -180,11 +180,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 
-	if (dwc->ep0_bounced && dep->number == 0)
+	if (dwc->ep0_bounced && dep->number <= 1)
 		dwc->ep0_bounced = false;
-	else
-		usb_gadget_unmap_request_by_dev(dwc->sysdev,
-				&req->request, req->direction);
+
+	usb_gadget_unmap_request_by_dev(dwc->sysdev,
+			&req->request, req->direction);
 
 	trace_dwc3_gadget_giveback(req);
 
@@ -1720,7 +1720,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 			reg |= DWC3_DCFG_LOWSPEED;
 			break;
 		case USB_SPEED_FULL:
-			reg |= DWC3_DCFG_FULLSPEED1;
+			reg |= DWC3_DCFG_FULLSPEED;
 			break;
 		case USB_SPEED_HIGH:
 			reg |= DWC3_DCFG_HIGHSPEED;
@@ -2232,9 +2232,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
 	dep = dwc->eps[epnum];
 
-	if (!(dep->flags & DWC3_EP_ENABLED) &&
-	    !(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
-		return;
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+			return;
+
+		/* Handle only EPCMDCMPLT when EP disabled */
+		if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
+			return;
+	}
 
 	if (epnum == 0 || epnum == 1) {
 		dwc3_ep0_interrupt(dwc, event);
@@ -2531,8 +2536,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_HIGH;
 		break;
-	case DWC3_DSTS_FULLSPEED2:
-	case DWC3_DSTS_FULLSPEED1:
+	case DWC3_DSTS_FULLSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_FULL;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 41ab61f9b6e0..002822d98fda 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1694,9 +1694,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		value = min(w_length, (u16) 1);
 		break;
 
-	/* function drivers must handle get/set altsetting; if there's
-	 * no get() method, we know only altsetting zero works.
-	 */
+	/* function drivers must handle get/set altsetting */
 	case USB_REQ_SET_INTERFACE:
 		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
 			goto unknown;
@@ -1705,7 +1703,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		f = cdev->config->interface[intf];
 		if (!f)
 			break;
-		if (w_value && !f->set_alt)
+
+		/*
+		 * If there's no get_alt() method, we know only altsetting zero
+		 * works. There is no need to check if set_alt() is not NULL
+		 * as we check this in usb_add_function().
+		 */
+		if (w_value && !f->get_alt)
 			break;
 		value = f->set_alt(f, w_index, w_value);
 		if (value == USB_GADGET_DELAYED_STATUS) {
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index aab3fc1dbb94..5e746adc8a2d 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2091,8 +2091,8 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 
 	case FFS_STRING:
 		/*
-		 * Strings are indexed from 1 (0 is magic ;) reserved
-		 * for languages list or some such)
+		 * Strings are indexed from 1 (0 is reserved
+		 * for languages list)
 		 */
 		if (*valuep > helper->ffs->strings_count)
 			helper->ffs->strings_count = *valuep;
@@ -2252,7 +2252,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    !d->Reserved1)
+		    d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])
@@ -3666,6 +3666,7 @@ static void ffs_closed(struct ffs_data *ffs)
 {
 	struct ffs_dev *ffs_obj;
 	struct f_fs_opts *opts;
+	struct config_item *ci;
 
 	ENTER();
 	ffs_dev_lock();
@@ -3689,8 +3690,11 @@ static void ffs_closed(struct ffs_data *ffs)
 	    || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
 		goto done;
 
-	unregister_gadget_item(ffs_obj->opts->
-			       func_inst.group.cg_item.ci_parent->ci_parent);
+	ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
+	ffs_dev_unlock();
+
+	unregister_gadget_item(ci);
+	return;
 done:
 	ffs_dev_unlock();
 }
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3151d2a0fe59..5f8139b8e601 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -593,7 +593,7 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		}
 		status = usb_ep_enable(hidg->out_ep);
 		if (status < 0) {
-			ERROR(cdev, "Enable IN endpoint FAILED!\n");
+			ERROR(cdev, "Enable OUT endpoint FAILED!\n");
 			goto fail;
 		}
 		hidg->out_ep->driver_data = hidg;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e8f4102d19df..6bde4396927c 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1126,7 +1126,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	/* data and/or status stage for control request */
 	} else if (dev->state == STATE_DEV_SETUP) {
 
-		/* IN DATA+STATUS caller makes len <= wLength */
+		len = min_t(size_t, len, dev->setup_wLength);
 		if (dev->setup_in) {
 			retval = setup_req (dev->gadget->ep0, dev->req, len);
 			if (retval == 0) {
@@ -1734,10 +1734,12 @@ static struct usb_gadget_driver gadgetfs_driver = {
  * such as configuration notifications.
  */
 
-static int is_valid_config (struct usb_config_descriptor *config)
+static int is_valid_config(struct usb_config_descriptor *config,
+		unsigned int total)
 {
 	return config->bDescriptorType == USB_DT_CONFIG
 		&& config->bLength == USB_DT_CONFIG_SIZE
+		&& total >= USB_DT_CONFIG_SIZE
 		&& config->bConfigurationValue != 0
 		&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
 		&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
@@ -1762,7 +1764,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	}
 	spin_unlock_irq(&dev->lock);
 
-	if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+	if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+	    (len > PAGE_SIZE * 4))
 		return -EINVAL;
 
 	/* we might need to change message format someday */
@@ -1786,7 +1789,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	/* full or low speed config */
 	dev->config = (void *) kbuf;
 	total = le16_to_cpu(dev->config->wTotalLength);
-	if (!is_valid_config (dev->config) || total >= length)
+	if (!is_valid_config(dev->config, total) ||
+			total > length - USB_DT_DEVICE_SIZE)
 		goto fail;
 	kbuf += total;
 	length -= total;
@@ -1795,10 +1799,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	if (kbuf [1] == USB_DT_CONFIG) {
 		dev->hs_config = (void *) kbuf;
 		total = le16_to_cpu(dev->hs_config->wTotalLength);
-		if (!is_valid_config (dev->hs_config) || total >= length)
+		if (!is_valid_config(dev->hs_config, total) ||
+				total > length - USB_DT_DEVICE_SIZE)
 			goto fail;
 		kbuf += total;
 		length -= total;
+	} else {
+		dev->hs_config = NULL;
 	}
 
 	/* could support multiple configs, using another encoding! */
@@ -1811,7 +1818,6 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 			|| dev->dev->bDescriptorType != USB_DT_DEVICE
 			|| dev->dev->bNumConfigurations != 1)
 		goto fail;
-	dev->dev->bNumConfigurations = 1;
 	dev->dev->bcdUSB = cpu_to_le16 (0x0200);
 
 	/* triggers gadgetfs_bind(); then we can enumerate. */
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 9483489080f6..0402177f93cd 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1317,7 +1317,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 			if (!ret)
 				break;
 		}
-		if (!ret && !udc->driver)
+		if (ret)
+			ret = -ENODEV;
+		else if (udc->driver)
+			ret = -EBUSY;
+		else
 			goto found;
 	} else {
 		list_for_each_entry(udc, &udc_list, list) {
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 02b14e91ae6c..c60abe3a68f9 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep)
 /* caller must hold lock */
 static void stop_activity(struct dummy *dum)
 {
-	struct dummy_ep	*ep;
+	int i;
 
 	/* prevent any more requests */
 	dum->address = 0;
@@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum)
 	/* The timer is left running so that outstanding URBs can fail */
 
 	/* nuke any pending requests first, so driver i/o is quiesced */
-	list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
-		nuke(dum, ep);
+	for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+		nuke(dum, &dum->ep[i]);
 
 	/* driver now does any non-usb quiescing necessary */
 }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index be9e63836881..414e3c376dbb 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -43,7 +43,6 @@ struct at91_usbh_data {
 	struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
 	u8 ports;				/* number of ports on root hub */
 	u8 overcurrent_supported;
-	u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
 	u8 overcurrent_status[AT91_MAX_USBH_PORTS];
 	u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
@@ -266,8 +265,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
 	if (!valid_port(port))
 		return;
 
-	gpiod_set_value(pdata->vbus_pin[port],
-			pdata->vbus_pin_active_low[port] ^ enable);
+	gpiod_set_value(pdata->vbus_pin[port], enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -275,8 +273,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 	if (!valid_port(port))
 		return -EINVAL;
 
-	return gpiod_get_value(pdata->vbus_pin[port]) ^
-	       pdata->vbus_pin_active_low[port];
+	return gpiod_get_value(pdata->vbus_pin[port]);
 }
 
 /*
@@ -533,18 +530,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 		pdata->ports = ports;
 
 	at91_for_each_port(i) {
-		pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
-							     "atmel,vbus-gpio",
-							     GPIOD_IN);
+		if (i >= pdata->ports)
+			break;
+
+		pdata->vbus_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+						      i, GPIOD_OUT_HIGH);
 		if (IS_ERR(pdata->vbus_pin[i])) {
 			err = PTR_ERR(pdata->vbus_pin[i]);
 			dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
 			continue;
 		}
-
-		pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
-		ohci_at91_usb_set_power(pdata, i, 1);
 	}
 
 	at91_for_each_port(i) {
@@ -552,8 +548,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 			break;
 
 		pdata->overcurrent_pin[i] =
-			devm_gpiod_get_optional(&pdev->dev,
-						"atmel,oc-gpio", GPIOD_IN);
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+						      i, GPIOD_IN);
 		if (IS_ERR(pdata->overcurrent_pin[i])) {
 			err = PTR_ERR(pdata->overcurrent_pin[i]);
 			dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 321de2e0161b..8414ed2a02de 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -979,6 +979,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 	xhci->devs[slot_id] = NULL;
 }
 
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *vdev;
+	struct list_head *tt_list_head;
+	struct xhci_tt_bw_info *tt_info, *next;
+	int i;
+
+	vdev = xhci->devs[slot_id];
+	if (!vdev)
+		return;
+
+	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* is this a hub device that added a tt_info to the tts list */
+		if (tt_info->slot_id == slot_id) {
+			/* are any devices using this tt_info? */
+			for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+				vdev = xhci->devs[i];
+				if (vdev && (vdev->tt_info == tt_info))
+					xhci_free_virt_devices_depth_first(
+						xhci, i);
+			}
+		}
+	}
+	/* we are now at a leaf device */
+	xhci_free_virt_device(xhci, slot_id);
+}
+
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		struct usb_device *udev, gfp_t flags)
 {
@@ -1795,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	del_timer_sync(&xhci->cmd_timer);
+	cancel_delayed_work_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1828,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
-	for (i = 1; i < MAX_HC_SLOTS; ++i)
-		xhci_free_virt_device(xhci, i);
+	for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+		xhci_free_virt_devices_depth_first(xhci, i);
 
 	dma_pool_destroy(xhci->segment_pool);
 	xhci->segment_pool = NULL;
@@ -2342,9 +2376,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->cmd_list);
 
-	/* init command timeout timer */
-	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
-		    (unsigned long)xhci);
+	/* init command timeout work */
+	INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+	init_completion(&xhci->cmd_ring_stop_completion);
 
 	page_size = readl(&xhci->op_regs->page_size);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 1094ebd2838f..bac961cd24ad 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -579,8 +579,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		goto disable_ldos;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0) {
+		ret = irq;
 		goto disable_clk;
+	}
 
 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
 	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e96ae80d107e..954abfd5014d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -165,7 +165,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
-		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
 		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bdf6b13d9b67..25f522b09dd9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -279,23 +279,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 	readl(&xhci->dba->doorbell[0]);
 }
 
-static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+	return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+	return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+					cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+					 struct xhci_command *cur_cmd)
+{
+	struct xhci_command *i_cmd;
+	u32 cycle_state;
+
+	/* Turn all aborted commands in list to no-ops, then restart */
+	list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+		if (i_cmd->status != COMP_CMD_ABORT)
+			continue;
+
+		i_cmd->status = COMP_CMD_STOP;
+
+		xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+			 i_cmd->command_trb);
+		/* get cycle state from the original cmd trb */
+		cycle_state = le32_to_cpu(
+			i_cmd->command_trb->generic.field[3]) &	TRB_CYCLE;
+		/* modify the command trb to no-op command */
+		i_cmd->command_trb->generic.field[0] = 0;
+		i_cmd->command_trb->generic.field[1] = 0;
+		i_cmd->command_trb->generic.field[2] = 0;
+		i_cmd->command_trb->generic.field[3] = cpu_to_le32(
+			TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+
+		/*
+		 * caller waiting for completion is called when command
+		 *  completion event is received for these no-op commands
+		 */
+	}
+
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+	/* ring command ring doorbell to restart the command ring */
+	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
+		xhci->current_cmd = cur_cmd;
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_ring_cmd_db(xhci);
+	}
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
 	u64 temp_64;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
 
-	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-	xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+	reinit_completion(&xhci->cmd_ring_stop_completion);
 
-	/*
-	 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
-	 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
-	 * but the completion event in never sent. Use the cmd timeout timer to
-	 * handle those cases. Use twice the time to cover the bit polling retry
-	 */
-	mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
 			&xhci->op_regs->cmd_ring);
 
@@ -315,17 +368,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
 		udelay(1000);
 		ret = xhci_handshake(&xhci->op_regs->cmd_ring,
 				     CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
-		if (ret == 0)
-			return 0;
-
-		xhci_err(xhci, "Stopped the command ring failed, "
-				"maybe the host is dead\n");
-		del_timer(&xhci->cmd_timer);
-		xhci->xhc_state |= XHCI_STATE_DYING;
-		xhci_halt(xhci);
-		return -ESHUTDOWN;
+		if (ret < 0) {
+			xhci_err(xhci, "Stopped the command ring failed, "
+				 "maybe the host is dead\n");
+			xhci->xhc_state |= XHCI_STATE_DYING;
+			xhci_halt(xhci);
+			return -ESHUTDOWN;
+		}
+	}
+	/*
+	 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+	 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+	 * but the completion event in never sent. Wait 2 secs (arbitrary
+	 * number) to handle those cases after negation of CMD_RING_RUNNING.
+	 */
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+					  msecs_to_jiffies(2000));
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!ret) {
+		xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+		xhci_cleanup_command_queue(xhci);
+	} else {
+		xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
 	}
-
 	return 0;
 }
 
@@ -1207,101 +1273,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
 		xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT);
 }
 
-/*
- * Turn all commands on command ring with status set to "aborted" to no-op trbs.
- * If there are other commands waiting then restart the ring and kick the timer.
- * This must be called with command ring stopped and xhci->lock held.
- */
-static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
-					 struct xhci_command *cur_cmd)
-{
-	struct xhci_command *i_cmd, *tmp_cmd;
-	u32 cycle_state;
-
-	/* Turn all aborted commands in list to no-ops, then restart */
-	list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list,
-				 cmd_list) {
-
-		if (i_cmd->status != COMP_CMD_ABORT)
-			continue;
-
-		i_cmd->status = COMP_CMD_STOP;
-
-		xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
-			 i_cmd->command_trb);
-		/* get cycle state from the original cmd trb */
-		cycle_state = le32_to_cpu(
-			i_cmd->command_trb->generic.field[3]) &	TRB_CYCLE;
-		/* modify the command trb to no-op command */
-		i_cmd->command_trb->generic.field[0] = 0;
-		i_cmd->command_trb->generic.field[1] = 0;
-		i_cmd->command_trb->generic.field[2] = 0;
-		i_cmd->command_trb->generic.field[3] = cpu_to_le32(
-			TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
-
-		/*
-		 * caller waiting for completion is called when command
-		 *  completion event is received for these no-op commands
-		 */
-	}
-
-	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
-	/* ring command ring doorbell to restart the command ring */
-	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
-	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
-		xhci->current_cmd = cur_cmd;
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
-		xhci_ring_cmd_db(xhci);
-	}
-	return;
-}
-
-
-void xhci_handle_command_timeout(unsigned long data)
+void xhci_handle_command_timeout(struct work_struct *work)
 {
 	struct xhci_hcd *xhci;
 	int ret;
 	unsigned long flags;
 	u64 hw_ring_state;
-	bool second_timeout = false;
-	xhci = (struct xhci_hcd *) data;
 
-	/* mark this command to be cancelled */
+	xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (xhci->current_cmd) {
-		if (xhci->current_cmd->status == COMP_CMD_ABORT)
-			second_timeout = true;
-		xhci->current_cmd->status = COMP_CMD_ABORT;
+
+	/*
+	 * If timeout work is pending, or current_cmd is NULL, it means we
+	 * raced with command completion. Command is handled so just return.
+	 */
+	if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
 	}
+	/* mark this command to be cancelled */
+	xhci->current_cmd->status = COMP_CMD_ABORT;
 
 	/* Make sure command ring is running before aborting it */
 	hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
 	    (hw_ring_state & CMD_RING_RUNNING))  {
-		spin_unlock_irqrestore(&xhci->lock, flags);
+		/* Prevent new doorbell, and start command abort */
+		xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
 		xhci_dbg(xhci, "Command timeout\n");
-		ret = xhci_abort_cmd_ring(xhci);
+		ret = xhci_abort_cmd_ring(xhci, flags);
 		if (unlikely(ret == -ESHUTDOWN)) {
 			xhci_err(xhci, "Abort command ring failed\n");
 			xhci_cleanup_command_queue(xhci);
+			spin_unlock_irqrestore(&xhci->lock, flags);
 			usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 			xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+			return;
 		}
-		return;
+
+		goto time_out_completed;
 	}
 
-	/* command ring failed to restart, or host removed. Bail out */
-	if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+	/* host removed. Bail out */
+	if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+		xhci_dbg(xhci, "host removed, ring start fail?\n");
 		xhci_cleanup_command_queue(xhci);
-		return;
+
+		goto time_out_completed;
 	}
 
 	/* command timeout on stopped ring, ring can't be aborted */
 	xhci_dbg(xhci, "Command timeout on stopped ring\n");
 	xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return;
 }
@@ -1333,7 +1360,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 
 	cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
 
-	del_timer(&xhci->cmd_timer);
+	cancel_delayed_work(&xhci->cmd_timer);
 
 	trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
 
@@ -1341,7 +1368,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 
 	/* If CMD ring stopped we own the trbs between enqueue and dequeue */
 	if (cmd_comp_code == COMP_CMD_STOP) {
-		xhci_handle_stopped_cmd_ring(xhci, cmd);
+		complete_all(&xhci->cmd_ring_stop_completion);
 		return;
 	}
 
@@ -1359,8 +1386,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	 */
 	if (cmd_comp_code == COMP_CMD_ABORT) {
 		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
-		if (cmd->status == COMP_CMD_ABORT)
+		if (cmd->status == COMP_CMD_ABORT) {
+			if (xhci->current_cmd == cmd)
+				xhci->current_cmd = NULL;
 			goto event_handled;
+		}
 	}
 
 	cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
@@ -1421,7 +1451,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	if (cmd->cmd_list.next != &xhci->cmd_list) {
 		xhci->current_cmd = list_entry(cmd->cmd_list.next,
 					       struct xhci_command, cmd_list);
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+	} else if (xhci->current_cmd == cmd) {
+		xhci->current_cmd = NULL;
 	}
 
 event_handled:
@@ -1939,8 +1971,9 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct xhci_ep_ctx *ep_ctx;
 	u32 trb_comp_code;
 	u32 remaining, requested;
-	bool on_data_stage;
+	u32 trb_type;
 
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
 	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
 	xdev = xhci->devs[slot_id];
 	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
@@ -1950,14 +1983,11 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	requested = td->urb->transfer_buffer_length;
 	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 
-	/* not setup (dequeue), or status stage means we are at data stage */
-	on_data_stage = (ep_trb != ep_ring->dequeue && ep_trb != td->last_trb);
-
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
-		if (ep_trb != td->last_trb) {
+		if (trb_type != TRB_STATUS) {
 			xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
-				  on_data_stage ? "data" : "setup");
+				  (trb_type == TRB_DATA) ? "data" : "setup");
 			*status = -ESHUTDOWN;
 			break;
 		}
@@ -1967,15 +1997,25 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		*status = 0;
 		break;
 	case COMP_STOP_SHORT:
-		if (on_data_stage)
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
 			td->urb->actual_length = remaining;
 		else
 			xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
 		goto finish_td;
 	case COMP_STOP:
-		if (on_data_stage)
+		switch (trb_type) {
+		case TRB_SETUP:
+			td->urb->actual_length = 0;
+			goto finish_td;
+		case TRB_DATA:
+		case TRB_NORMAL:
 			td->urb->actual_length = requested - remaining;
-		goto finish_td;
+			goto finish_td;
+		default:
+			xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
+				  trb_type);
+			goto finish_td;
+		}
 	case COMP_STOP_INVAL:
 		goto finish_td;
 	default:
@@ -1987,7 +2027,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		/* else fall through */
 	case COMP_STALL:
 		/* Did we transfer part of the data (middle) phase? */
-		if (on_data_stage)
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
 			td->urb->actual_length = requested - remaining;
 		else if (!td->urb_length_set)
 			td->urb->actual_length = 0;
@@ -1995,14 +2035,15 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	}
 
 	/* stopped at setup stage, no data transferred */
-	if (ep_trb == ep_ring->dequeue)
+	if (trb_type == TRB_SETUP)
 		goto finish_td;
 
 	/*
 	 * if on data stage then update the actual_length of the URB and flag it
 	 * as set, so it won't be overwritten in the event for the last TRB.
 	 */
-	if (on_data_stage) {
+	if (trb_type == TRB_DATA ||
+		trb_type == TRB_NORMAL) {
 		td->urb_length_set = true;
 		td->urb->actual_length = requested - remaining;
 		xhci_dbg(xhci, "Waiting for status stage event\n");
@@ -3790,9 +3831,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 
 	/* if there are no other commands queued we start the timeout timer */
 	if (xhci->cmd_list.next == &cmd->cmd_list &&
-	    !timer_pending(&xhci->cmd_timer)) {
+	    !delayed_work_pending(&xhci->cmd_timer)) {
 		xhci->current_cmd = cmd;
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
 	}
 
 	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1cd56417cbec..0c8deb9ed42d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3787,8 +3787,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
-	if (xhci->xhc_state)	/* dying, removing or halted */
+	if (xhci->xhc_state) {	/* dying, removing or halted */
+		ret = -ESHUTDOWN;
 		goto out;
+	}
 
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8ccc11a974b8..2d7b6374b58d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1568,7 +1568,8 @@ struct xhci_hcd {
 #define CMD_RING_STATE_STOPPED         (1 << 2)
 	struct list_head        cmd_list;
 	unsigned int		cmd_ring_reserved_trbs;
-	struct timer_list	cmd_timer;
+	struct delayed_work	cmd_timer;
+	struct completion	cmd_ring_stop_completion;
 	struct xhci_command	*current_cmd;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
@@ -1934,7 +1935,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_dequeue_state *deq_state);
 void xhci_stop_endpoint_command_watchdog(unsigned long arg);
-void xhci_handle_command_timeout(unsigned long data);
+void xhci_handle_command_timeout(struct work_struct *work);
 
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 310238c6b5cd..896798071817 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = {
 	.init		= bfin_musb_init,
 	.exit		= bfin_musb_exit,
 
+	.fifo_offset	= bfin_fifo_offset,
 	.readb		= bfin_readb,
 	.writeb		= bfin_writeb,
 	.readw		= bfin_readw,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9e226468a13e..fca288bbc800 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2050,6 +2050,7 @@ struct musb_pending_work {
 	struct list_head node;
 };
 
+#ifdef CONFIG_PM
 /*
  * Called from musb_runtime_resume(), musb_resume(), and
  * musb_queue_resume_work(). Callers must take musb->lock.
@@ -2077,6 +2078,7 @@ static int musb_run_resume_work(struct musb *musb)
 
 	return error;
 }
+#endif
 
 /*
  * Called to run work if device is active or else queue the work to happen
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index a611e2f67bdc..ade902ea1221 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -216,6 +216,7 @@ struct musb_platform_ops {
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
 	int	(*phy_callback)(enum musb_vbus_id_status status);
+	void	(*clear_ep_rxintr)(struct musb *musb, int epnum);
 };
 
 /*
@@ -626,6 +627,12 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
 		musb->ops->post_root_reset_end(musb);
 }
 
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	if (musb->ops->clear_ep_rxintr)
+		musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
 /*
  * gets the "dr_mode" property from DT and converts it into musb_mode
  * if the property is not found or not recognized returns MUSB_OTG
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index feae1561b9ab..9f125e179acd 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -267,6 +267,17 @@ static void otg_timer(unsigned long _musb)
 	pm_runtime_put_autosuspend(dev);
 }
 
+void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	u32 epintr;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+	/* musb->lock might already been held */
+	epintr = (1 << epnum) << wrp->rxep_shift;
+	musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
 static irqreturn_t dsps_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
@@ -622,6 +633,7 @@ static struct musb_platform_ops dsps_ops = {
 
 	.set_mode	= dsps_musb_set_mode,
 	.recover	= dsps_musb_recover,
+	.clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index f6cdbad00dac..ac3a4952abb4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2374,12 +2374,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 	int			is_in = usb_pipein(urb->pipe);
 	int			status = 0;
 	u16			csr;
+	struct dma_channel	*dma = NULL;
 
 	musb_ep_select(regs, hw_end);
 
 	if (is_dma_capable()) {
-		struct dma_channel	*dma;
-
 		dma = is_in ? ep->rx_channel : ep->tx_channel;
 		if (dma) {
 			status = ep->musb->dma_controller->channel_abort(dma);
@@ -2395,10 +2394,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 		/* giveback saves bulk toggle */
 		csr = musb_h_flush_rxfifo(ep, 0);
 
-		/* REVISIT we still get an irq; should likely clear the
-		 * endpoint's irq status here to avoid bogus irqs.
-		 * clearing that status is platform-specific...
-		 */
+		/* clear the endpoint's irq status here to avoid bogus irqs */
+		if (is_dma_capable() && dma)
+			musb_platform_clear_ep_rxintr(musb, ep->epnum);
 	} else if (ep->epnum) {
 		musb_h_tx_flush_fifo(ep);
 		csr = musb_readw(epio, MUSB_TXCSR);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f7b13fd25257..a3dcbd55e436 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -157,5 +157,5 @@ struct musb_dma_controller {
 	void __iomem			*base;
 	u8				channel_count;
 	u8				used_channels;
-	u8				irq;
+	int				irq;
 };
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 5f17a3b9916d..80260b08398b 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
 static int cyberjack_port_probe(struct usb_serial_port *port);
 static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		cyberjack_attach,
 	.port_probe =		cyberjack_port_probe,
 	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
+static int cyberjack_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 8282a6a18fee..22f23a429a95 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -1237,6 +1237,7 @@ static int f81534_attach(struct usb_serial *serial)
 static int f81534_port_probe(struct usb_serial_port *port)
 {
 	struct f81534_port_private *port_priv;
+	int ret;
 
 	port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
 	if (!port_priv)
@@ -1246,10 +1247,11 @@ static int f81534_port_probe(struct usb_serial_port *port)
 	mutex_init(&port_priv->mcr_mutex);
 
 	/* Assign logic-to-phy mapping */
-	port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
-	if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
-		return -ENODEV;
+	ret = f81534_logic_to_phy_port(port->serial, port);
+	if (ret < 0)
+		return ret;
 
+	port_priv->phy_num = ret;
 	usb_set_serial_port_data(port, port_priv);
 	dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
 			port->port_number, port_priv->phy_num);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 97cabf803c2f..b2f2e87aed94 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1043,6 +1043,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		kfree(buffer);
 	}
 
 	/* we are done with this urb, so let the host driver
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dcc0c58aaad5..d50e5773483f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2751,6 +2751,11 @@ static int edge_startup(struct usb_serial *serial)
 					EDGE_COMPATIBILITY_MASK1,
 					EDGE_COMPATIBILITY_MASK2 };
 
+	if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	dev = serial->dev;
 
 	/* create our private serial structure */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c339163698eb..9a0db2965fbb 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
 
 		dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
 
-		/* return an error on purpose */
-		return -ENODEV;
+		return 1;
 	}
 
 stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
 	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
 	serial->product_info.TiMode = TI_MODE_BOOT;
 
-	return 0;
+	return 1;
 }
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2546,6 +2545,13 @@ static int edge_startup(struct usb_serial *serial)
 	int status;
 	u16 product_id;
 
+	/* Make sure we have the required endpoints when in download mode. */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+		if (serial->num_bulk_in < serial->num_ports ||
+				serial->num_bulk_out < serial->num_ports)
+			return -ENODEV;
+	}
+
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
 	if (!edge_serial)
@@ -2553,14 +2559,18 @@ static int edge_startup(struct usb_serial *serial)
 
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	usb_set_serial_data(serial, edge_serial);
 
 	status = download_fw(edge_serial);
-	if (status) {
+	if (status < 0) {
 		kfree(edge_serial);
 		return status;
 	}
 
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
 	product_id = le16_to_cpu(
 			edge_serial->serial->dev->descriptor.idProduct);
 
@@ -2572,7 +2582,6 @@ static int edge_startup(struct usb_serial *serial)
 		}
 	}
 
-	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	edge_heartbeat_schedule(edge_serial);
 
 	return 0;
@@ -2580,6 +2589,9 @@ static int edge_startup(struct usb_serial *serial)
 
 static void edge_disconnect(struct usb_serial *serial)
 {
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
 }
 
 static void edge_release(struct usb_serial *serial)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 344b4eea4bd5..d57fb5199218 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
 	u32 clk;
 };
 
+static int iuu_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
+	.attach = iuu_attach,
 	.port_probe = iuu_port_probe,
 	.port_remove = iuu_port_remove,
 };
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e49ad0c63ad8..83523fcf6fb9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
+	.attach =		keyspan_pda_attach,
 	.port_probe =		keyspan_pda_port_probe,
 	.port_remove =		keyspan_pda_port_remove,
 };
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 2363654cafc9..813035f51fe7 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
 
 
 /* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
 static int kobil_port_probe(struct usb_serial_port *probe);
 static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		kobil_attach,
 	.port_probe =		kobil_port_probe,
 	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
 };
 
 
+static int kobil_attach(struct usb_serial *serial)
+{
+	if (serial->num_interrupt_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int kobil_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index d52caa03679c..91bc170b408a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-static struct usb_serial_driver moschip7720_2port_driver;
-
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		tty_port_tty_wakeup(&mos7720_port->port->port);
 }
 
-/*
- * mos77xx_probe
- *	this function installs the appropriate read interrupt endpoint callback
- *	depending on whether the device is a 7720 or 7715, thus avoiding costly
- *	run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
-			 const struct usb_device_id *id)
-{
-	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
-		moschip7720_2port_driver.read_int_callback =
-			mos7715_interrupt_callback;
-	else
-		moschip7720_2port_driver.read_int_callback =
-			mos7720_interrupt_callback;
-
-	return 0;
-}
-
 static int mos77xx_calc_num_ports(struct usb_serial *serial)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1917,6 +1896,11 @@ static int mos7720_startup(struct usb_serial *serial)
 	u16 product;
 	int ret_val;
 
+	if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+		return -ENODEV;
+	}
+
 	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
@@ -1941,19 +1925,18 @@ static int mos7720_startup(struct usb_serial *serial)
 			tmp->interrupt_in_endpointAddress;
 		serial->port[1]->interrupt_in_urb = NULL;
 		serial->port[1]->interrupt_in_buffer = NULL;
+
+		if (serial->port[0]->interrupt_in_urb) {
+			struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+			urb->complete = mos7715_interrupt_callback;
+		}
 	}
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
-	/* start the interrupt urb */
-	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
-	if (ret_val)
-		dev_err(&dev->dev,
-			"%s - Error %d submitting control urb\n",
-			__func__, ret_val);
-
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	if (product == MOSCHIP_DEVICE_ID_7715) {
 		ret_val = mos7715_parport_init(serial);
@@ -1961,6 +1944,13 @@ static int mos7720_startup(struct usb_serial *serial)
 			return ret_val;
 	}
 #endif
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val) {
+		dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+			ret_val);
+	}
+
 	/* LSR For Port 1 */
 	read_mos_reg(serial, 0, MOS7720_LSR, &data);
 	dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1970,6 +1960,8 @@ static int mos7720_startup(struct usb_serial *serial)
 
 static void mos7720_release(struct usb_serial *serial)
 {
+	usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	/* close the parallel port */
 
@@ -2019,11 +2011,6 @@ static int mos7720_port_probe(struct usb_serial_port *port)
 	if (!mos7720_port)
 		return -ENOMEM;
 
-	/* Initialize all port interrupt end point to port 0 int endpoint.
-	 * Our device has only one interrupt endpoint common to all ports.
-	 */
-	port->interrupt_in_endpointAddress =
-		port->serial->port[0]->interrupt_in_endpointAddress;
 	mos7720_port->port = port;
 
 	usb_set_serial_port_data(port, mos7720_port);
@@ -2053,7 +2040,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
-	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.port_probe		= mos7720_port_probe,
@@ -2067,7 +2053,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= NULL  /* dynamically assigned in probe() */
+	.read_int_callback	= mos7720_interrupt_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 9a220b8e810f..ea27fb23967a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct moschip_port {
 	int port_num;		/*Actual port number in the device(1,2,etc) */
-	struct urb *write_urb;	/* write URB for this port */
 	struct urb *read_urb;	/* read URB for this port */
 	__u8 shadowLCR;		/* last LCR value received */
 	__u8 shadowMCR;		/* last MCR value received */
@@ -1037,9 +1036,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				serial,
 				serial->port[0]->interrupt_in_urb->interval);
 
-			/* start interrupt read for mos7840               *
-			 * will continue as long as mos7840 is connected  */
-
+			/* start interrupt read for mos7840 */
 			response =
 			    usb_submit_urb(serial->port[0]->interrupt_in_urb,
 					   GFP_KERNEL);
@@ -1186,7 +1183,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	usb_kill_urb(mos7840_port->write_urb);
 	usb_kill_urb(mos7840_port->read_urb);
 	mos7840_port->read_urb_busy = false;
 
@@ -1199,12 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	if (mos7840_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(mos7840_port->write_urb->transfer_buffer);
-		usb_free_urb(mos7840_port->write_urb);
-	}
-
 	Data = 0x0;
 	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
 
@@ -2113,6 +2103,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 	return mos7840_num_ports;
 }
 
+static int mos7840_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2388,6 +2389,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmset = mos7840_tiocmset,
 	.tiocmiwait = usb_serial_generic_tiocmiwait,
 	.get_icount = usb_serial_generic_get_icount,
+	.attach = mos7840_attach,
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index f6c6900bccf0..a180b17d2432 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
 static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
 static int omninet_port_probe(struct usb_serial_port *port);
 static int omninet_port_remove(struct usb_serial_port *port);
 
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		omninet_attach,
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
 	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
+static int omninet_attach(struct usb_serial *serial)
+{
+	/* The second bulk-out endpoint is used for writing. */
+	if (serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a4b88bc038b6..b8bf52bf7a94 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
 static int oti6858_port_probe(struct usb_serial_port *port);
 static int oti6858_port_remove(struct usb_serial_port *port);
 
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
+	.attach =		oti6858_attach,
 	.port_probe =		oti6858_port_probe,
 	.port_remove =		oti6858_port_remove,
 };
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
+static int oti6858_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int oti6858_port_probe(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae682e4eeaef..46fca6b75846 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial,
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
+	unsigned char num_ports = serial->num_ports;
 	enum pl2303_type type = TYPE_01;
 	unsigned char *buf;
 
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 659cb8606bd9..5709cc93b083 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct qt2_port_private *port_priv;
-	unsigned long flags;
 	int i;
 
 	serial = port->serial;
 	port_priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave(&port_priv->urb_lock, flags);
 	usb_kill_urb(port_priv->write_urb);
-	port_priv->urb_in_use = false;
-	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ef0dbf0703c5..475e6c31b266 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
+	.attach			= spcp8x5_attach,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8db9d071d940..64b85b8dedf3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -579,6 +579,13 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
 	return 0;
 
 free_tdev:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index af3c7eecff91..16cc18369111 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2109,6 +2109,13 @@ UNUSUAL_DEV(  0x152d, 0x2566, 0x0114, 0x0114,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+		"JMicron",
+		"JMS56x",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
 /*
  * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
  * and Mac USB Dock USB-SCSI */
diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h
index acc63697a0cc..b2a31a55a612 100644
--- a/include/uapi/linux/usb/functionfs.h
+++ b/include/uapi/linux/usb/functionfs.h
@@ -93,6 +93,7 @@ struct usb_ext_prop_desc {
  * |   0 | magic     | LE32         | FUNCTIONFS_DESCRIPTORS_MAGIC_V2      |
  * |   4 | length    | LE32         | length of the whole data chunk       |
  * |   8 | flags     | LE32         | combination of functionfs_flags      |
+ * |     | eventfd   | LE32         | eventfd file descriptor              |
  * |     | fs_count  | LE32         | number of full-speed descriptors     |
  * |     | hs_count  | LE32         | number of high-speed descriptors     |
  * |     | ss_count  | LE32         | number of super-speed descriptors    |