Merge branch 'topic/edma' into for-linus

Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Conflicts:
	drivers/dma/edma.c

21 files changed, 2197 insertions, 2491 deletions

diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index 63a48928f3a8..b152a75dceae 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -2,9 +2,10 @@ Texas Instruments DMA Crossbar (DMA request router)
 
 Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
+		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to <1>.
-		Clients should use the crossbar request number (input)
+- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
 
@@ -14,6 +15,15 @@ The DMA controller node need to have the following poroperties:
 Optional properties:
 - ti,dma-safe-map: Safe routing value for unused request lines
 
+Notes:
+When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+the DMA event number as crossbar ID (input to the DMA crossbar).
+
+For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
+dmas = <&edma_xbar 12 0 1>; where <12> is the DMA request number, <0> is the TC
+the event should be assigned and <1> is the mux selection for in the crossbar.
+When mux 0 is used the DMA channel can be requested directly from edma node.
+
 Example:
 
 /* DMA controller */
@@ -47,6 +57,7 @@ uart1: serial@4806a000 {
 	ti,hwmods = "uart1";
 	clock-frequency = <48000000>;
 	status = "disabled";
+	/* Requesting crossbar input 49 and 50 */
 	dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 	dma-names = "tx", "rx";
 };
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 5ba525a10035..d3d0a4fb1c73 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -1,4 +1,119 @@
-TI EDMA
+Texas Instruments eDMA
+
+The eDMA3 consists of two components: Channel controller (CC) and Transfer
+Controller(s) (TC). The CC is the main entry for DMA users since it is
+responsible for the DMA channel handling, while the TCs are responsible to
+execute the actual DMA tansfer.
+
+------------------------------------------------------------------------------
+eDMA3 Channel Controller
+
+Required properties:
+- compatible:	"ti,edma3-tpcc" for the channel controller(s)
+- #dma-cells:	Should be set to <2>. The first number is the DMA request
+		number and the second is the TC the channel is serviced on.
+- reg:		Memory map of eDMA CC
+- reg-names:	"edma3_cc"
+- interrupts:	Interrupt lines for CCINT, MPERR and CCERRINT.
+- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
+- ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
+		<&tptc_phandle TC_priority_number>. The highest priority is 0.
+
+Optional properties:
+- ti,hwmods:	Name of the hwmods associated to the eDMA CC
+- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
+		these channels will be SW triggered channels. The list must
+		contain 16 bits numbers, see example.
+- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
+		the driver, they are allocated to be used by for example the
+		DSP. See example.
+
+------------------------------------------------------------------------------
+eDMA3 Transfer Controller
+
+Required properties:
+- compatible:	"ti,edma3-tptc" for the transfer controller(s)
+- reg:		Memory map of eDMA TC
+- interrupts:	Interrupt number for TCerrint.
+
+Optional properties:
+- ti,hwmods:	Name of the hwmods associated to the given eDMA TC
+- interrupt-names: "edma3_tcerrint"
+
+------------------------------------------------------------------------------
+Example:
+
+edma: edma@49000000 {
+	compatible = "ti,edma3-tpcc";
+	ti,hwmods = "tpcc";
+	reg =	<0x49000000 0x10000>;
+	reg-names = "edma3_cc";
+	interrupts = <12 13 14>;
+	interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
+	dma-requests = <64>;
+	#dma-cells = <2>;
+
+	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
+
+	/* Channel 20 and 21 is allocated for memcpy */
+	ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+	/* The following PaRAM slots are reserved: 35-45 and 100-110 */
+	ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
+				       /bits/ 16 <100 10>;
+};
+
+edma_tptc0: tptc@49800000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc0";
+	reg =	<0x49800000 0x100000>;
+	interrupts = <112>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc1: tptc@49900000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc1";
+	reg =	<0x49900000 0x100000>;
+	interrupts = <113>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc2: tptc@49a00000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc2";
+	reg =	<0x49a00000 0x100000>;
+	interrupts = <114>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+sham: sham@53100000 {
+	compatible = "ti,omap4-sham";
+	ti,hwmods = "sham";
+	reg = <0x53100000 0x200>;
+	interrupts = <109>;
+	/* DMA channel 36 executed on eDMA TC0 - low priority queue */
+	dmas = <&edma 36 0>;
+	dma-names = "rx";
+};
+
+mcasp0: mcasp@48038000 {
+	compatible = "ti,am33xx-mcasp-audio";
+	ti,hwmods = "mcasp0";
+	reg = <0x48038000 0x2000>,
+		<0x46000000 0x400000>;
+	reg-names = "mpu", "dat";
+	interrupts = <80>, <81>;
+	interrupt-names = "tx", "rx";
+	status = "disabled";
+	/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
+	dmas = <&edma 8 2>,
+	       <&edma 9 2>;
+	dma-names = "tx", "rx";
+};
+
+------------------------------------------------------------------------------
+DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
+binding.
 
 Required properties:
 - compatible : "ti,edma3"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 72ad724c67ae..513e38701418 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -736,7 +736,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
 	help
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1942a5c8132d..507980672c32 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -743,8 +743,8 @@
 &mmc3 {
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +766,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
 &sham {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7464..39073b921664 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -339,13 +339,6 @@
 	ti,non-removable;
 };
 
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
 &mmc3 {
 	/* Wifi & Bluetooth on MMC #3 */
 	status = "okay";
@@ -354,8 +347,8 @@
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
 	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 };
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d23e2524d694..6053e75c6e99 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -174,12 +174,54 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_xbar: dma-router@44e10f90 {
+			compatible = "ti,am335x-edma-crossbar";
+			reg = <0x44e10f90 0x40>;
+
+			#dma-cells = <3>;
+			dma-requests = <32>;
+
+			dma-masters = <&edma>;
 		};
 
 		gpio0: gpio@44e07000 {
@@ -233,7 +275,7 @@
 			reg = <0x44e09000 0x2000>;
 			interrupts = <72>;
 			status = "disabled";
-			dmas = <&edma 26>, <&edma 27>;
+			dmas = <&edma 26 0>, <&edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -244,7 +286,7 @@
 			reg = <0x48022000 0x2000>;
 			interrupts = <73>;
 			status = "disabled";
-			dmas = <&edma 28>, <&edma 29>;
+			dmas = <&edma 28 0>, <&edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -255,7 +297,7 @@
 			reg = <0x48024000 0x2000>;
 			interrupts = <74>;
 			status = "disabled";
-			dmas = <&edma 30>, <&edma 31>;
+			dmas = <&edma 30 0>, <&edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -322,8 +364,8 @@
 			ti,dual-volt;
 			ti,needs-special-reset;
 			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma_xbar 24 0 0
+				&edma_xbar 25 0 0>;
 			dma-names = "tx", "rx";
 			interrupts = <64>;
 			interrupt-parent = <&intc>;
@@ -335,8 +377,8 @@
 			compatible = "ti,omap4-hsmmc";
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0
+				&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <28>;
 			interrupt-parent = <&intc>;
@@ -474,10 +516,10 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
+			dmas = <&edma 16 0
+				&edma 17 0
+				&edma 18 0
+				&edma 19 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -490,10 +532,10 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
+			dmas = <&edma 42 0
+				&edma 43 0
+				&edma 44 0
+				&edma 45 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -831,7 +873,7 @@
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x200>;
 			interrupts = <109>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 		};
 
@@ -840,8 +882,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53500000 0xa0>;
 			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
+			dmas = <&edma 6 0>,
+			       <&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -854,8 +896,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
+			dmas = <&edma 8 2>,
+				<&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -868,8 +910,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
+			dmas = <&edma 10 2>,
+				<&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 0447c04a40cc..461548ed69fd 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -183,14 +183,56 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = /bits/ 16 <32 33>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_xbar: dma-router@44e10f90 {
+			compatible = "ti,am335x-edma-crossbar";
+			reg = <0x44e10f90 0x40>;
+
+			#dma-cells = <3>;
+			dma-requests = <64>;
+
+			dma-masters = <&edma>;
 		};
 
 		uart0: serial@44e09000 {
@@ -495,8 +537,8 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma 24 0>,
+				<&edma 25 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -507,8 +549,8 @@
 			reg = <0x481d8000 0x1000>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0>,
+				<&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -775,7 +817,7 @@
 			compatible = "ti,omap5-sham";
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -785,8 +827,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53501000 0xa0>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
+			dmas = <&edma 6 0>,
+				<&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -795,8 +837,8 @@
 			ti,hwmods = "des";
 			reg = <0x53701000 0xa0>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
+			dmas = <&edma 34 0>,
+				<&edma 33 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -809,8 +851,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
+			dmas = <&edma 8 2>,
+			       <&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -823,8 +865,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
+			dmas = <&edma 10 2>,
+			       <&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..28e3b252c08c 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -711,8 +711,8 @@
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 30
-		&edma 31>;
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
 	dma-names = "tx", "rx";
 	vmmc-supply = <&vmmcwl_fixed>;
 	bus-width = <4>;
@@ -733,11 +733,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 30
-					    2 31>;
-};
-
 &uart3 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c3a4e9ceba34..9353184d730d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ee5959a813b..27f23b15b1ea 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
deleted file mode 100644
index 873dbfcc7dc9..000000000000
--- a/arch/arm/common/edma.c
+++ /dev/null
@@ -1,1876 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_dma.h>
-#include <linux/of_irq.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-
-/* CCCFG register */
-#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
-#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
-#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
-#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
-#define CHMAP_EXIST		BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	struct edma_soc_info *info;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(ctlr, SH_ICR, bank,
-					BIT(slot));
-			if (edma_cc[ctlr]->intr_data[channel].callback)
-				edma_cc[ctlr]->intr_data[channel].callback(
-					channel, EDMA_DMA_COMPLETE,
-					edma_cc[ctlr]->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						EDMA_DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	j = start_slot;
-	for_each_set_bit_from(j, tmp_inuse, stop_slot)
-		clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, count, ctlr;
-	struct of_phandle_args  dma_spec;
-
-	if (dev->of_node) {
-		count = of_property_count_strings(dev->of_node, "dma-names");
-		if (count < 0)
-			return 0;
-		for (i = 0; i < count; i++) {
-			if (of_parse_phandle_with_args(dev->of_node, "dmas",
-						       "#dma-cells", i,
-						       &dma_spec))
-				continue;
-
-			if (!of_match_node(edma_of_ids, dma_spec.np)) {
-				of_node_put(dma_spec.np);
-				continue;
-			}
-
-			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
-				  edma_cc[0]->edma_unused);
-			of_node_put(dma_spec.np);
-		}
-		return 0;
-	}
-
-	/* For non-OF case */
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-				  edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (!edma_cc[ctlr])
-		return -EINVAL;
-
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer point
- * @slot: parameter RAM slot being examined
- * @dst:  true selects the dest position, false the source
- *
- * Returns the position of the current active slot
- */
-dma_addr_t edma_get_position(unsigned slot, bool dst)
-{
-	u32 offs, ctlr = EDMA_CTLR(slot);
-
-	slot = EDMA_CHAN_SLOT(slot);
-
-	offs = PARM_OFFSET(slot);
-	offs += dst ? PARM_DST : PARM_SRC;
-
-	return edma_read(ctlr, offs);
-}
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-int edma_trigger_channel(unsigned channel)
-{
-	unsigned ctlr;
-	unsigned int mask;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-	mask = BIT(channel & 0x1f);
-
-	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
-
-	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
-	return 0;
-}
-EXPORT_SYMBOL(edma_trigger_channel);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		/* clear possibly pending completion interrupt */
-		edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*
- * edma_assign_channel_eventq - move given channel to desired eventq
- * Arguments:
- *	channel - channel number
- *	eventq_no - queue to move the channel
- *
- * Can be used to move a channel to a selected event queue.
- */
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	/* default to low priority queue */
-	if (eventq_no == EVENTQ_DEFAULT)
-		eventq_no = edma_cc[ctlr]->default_queue;
-	if (eventq_no >= edma_cc[ctlr]->num_tc)
-		return;
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-}
-EXPORT_SYMBOL(edma_assign_channel_eventq);
-
-static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc, int cc_id)
-{
-	int i;
-	u32 value, cccfg;
-	s8 (*queue_priority_map)[2];
-
-	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(cc_id, EDMA_CCCFG);
-
-	value = GET_NUM_REGN(cccfg);
-	edma_cc->num_region = BIT(value);
-
-	value = GET_NUM_DMACH(cccfg);
-	edma_cc->num_channels = BIT(value + 1);
-
-	value = GET_NUM_PAENTRY(cccfg);
-	edma_cc->num_slots = BIT(value + 4);
-
-	value = GET_NUM_EVQUE(cccfg);
-	edma_cc->num_tc = value + 1;
-
-	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
-		cccfg);
-	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
-	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
-	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
-	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
-
-	/* Nothing need to be done if queue priority is provided */
-	if (pdata->queue_priority_mapping)
-		return 0;
-
-	/*
-	 * Configure TC/queue priority as follows:
-	 * Q0 - priority 0
-	 * Q1 - priority 1
-	 * Q2 - priority 2
-	 * ...
-	 * The meaning of priority numbers: 0 highest priority, 7 lowest
-	 * priority. So Q0 is the highest priority queue and the last queue has
-	 * the lowest priority.
-	 */
-	queue_priority_map = devm_kzalloc(dev,
-					  (edma_cc->num_tc + 1) * sizeof(s8),
-					  GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < edma_cc->num_tc; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-	/* Default queue has the lowest priority */
-	pdata->default_queue = i - 1;
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-			       struct edma_soc_info *pdata, size_t sz)
-{
-	const char pname[] = "ti,edma-xbar-event-map";
-	struct resource res;
-	void __iomem *xbar;
-	s16 (*xbar_chans)[2];
-	size_t nelm = sz / sizeof(s16);
-	u32 shift, offset, mux;
-	int ret, i;
-
-	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-	if (!xbar_chans)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(node, 1, &res);
-	if (ret)
-		return -ENOMEM;
-
-	xbar = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!xbar)
-		return -ENOMEM;
-
-	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-	if (ret)
-		return -EIO;
-
-	/* Invalidate last entry for the other user of this mess */
-	nelm >>= 1;
-	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
-
-	for (i = 0; i < nelm; i++) {
-		shift = (xbar_chans[i][1] & 0x03) << 3;
-		offset = xbar_chans[i][1] & 0xfffffffc;
-		mux = readl(xbar + offset);
-		mux &= ~(0xff << shift);
-		mux |= xbar_chans[i][0] << shift;
-		writel(mux, (xbar + offset));
-	}
-
-	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-	return 0;
-}
-
-static int edma_of_parse_dt(struct device *dev,
-			    struct device_node *node,
-			    struct edma_soc_info *pdata)
-{
-	int ret = 0;
-	struct property *prop;
-	size_t sz;
-	struct edma_rsv_info *rsv_info;
-
-	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
-	if (!rsv_info)
-		return -ENOMEM;
-	pdata->rsv = rsv_info;
-
-	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
-	if (prop)
-		ret = edma_xbar_event_map(dev, node, pdata, sz);
-
-	return ret;
-}
-
-static struct of_dma_filter_info edma_filter_info = {
-	.filter_fn = edma_filter_fn,
-};
-
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	struct edma_soc_info *info;
-	int ret;
-
-	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
-	ret = edma_of_parse_dt(dev, node, info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
-	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
-	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
-				   &edma_filter_info);
-
-	return info;
-}
-#else
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif
-
-static int edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
-	s8		(*queue_priority_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	struct resource		res[EDMA_MAX_CC];
-	char			res_name[10];
-	struct device_node	*node = pdev->dev.of_node;
-	struct device		*dev = &pdev->dev;
-	int			ret;
-	struct platform_device_info edma_dev_info = {
-		.name = "edma-dma-engine",
-		.dma_mask = DMA_BIT_MASK(32),
-		.parent = &pdev->dev,
-	};
-
-	if (node) {
-		/* Check if this is a second instance registered */
-		if (arch_num_cc) {
-			dev_err(dev, "only one EDMA instance is supported via DT\n");
-			return -ENODEV;
-		}
-
-		ninfo[0] = edma_setup_info_from_dt(dev, node);
-		if (IS_ERR(ninfo[0])) {
-			dev_err(dev, "failed to get DT data\n");
-			return PTR_ERR(ninfo[0]);
-		}
-
-		info = ninfo;
-	}
-
-	if (!info)
-		return -ENODEV;
-
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		if (!info[j]) {
-			if (!found)
-				return -ENODEV;
-			break;
-		}
-		if (node) {
-			ret = of_address_to_resource(node, j, &res[j]);
-			if (!ret)
-				r[j] = &res[j];
-		} else {
-			sprintf(res_name, "edma_cc%d", j);
-			r[j] = platform_get_resource_byname(pdev,
-						IORESOURCE_MEM,
-						res_name);
-		}
-		if (!r[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
-		if (IS_ERR(edmacc_regs_base[j]))
-			return PTR_ERR(edmacc_regs_base[j]);
-
-		edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
-					  GFP_KERNEL);
-		if (!edma_cc[j])
-			return -ENOMEM;
-
-		/* Get eDMA3 configuration from IP */
-		ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
-		if (ret)
-			return ret;
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						  edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		/* Clear the xbar mapped channels in unused list */
-		xbar_chans = info[j]->xbar_chans;
-		if (xbar_chans) {
-			for (i = 0; xbar_chans[i][1] != -1; i++) {
-				off = xbar_chans[i][1];
-				clear_bits(off, 1,
-					   edma_cc[j]->edma_unused);
-			}
-		}
-
-		if (node) {
-			irq[j] = irq_of_parse_and_map(node, 0);
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			char irq_name[10];
-
-			sprintf(irq_name, "edma%d", j);
-			irq[j] = platform_get_irq_byname(pdev, irq_name);
-
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_start = irq[j];
-		edma_cc[j]->irq_res_end = err_irq[j];
-
-		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
-					  "edma", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				irq[j], status);
-			return status;
-		}
-
-		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
-					  "edma_error", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			return status;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < edma_cc[j]->num_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		edma_cc[j]->info = info[j];
-		arch_num_cc++;
-
-		edma_dev_info.id = j;
-		platform_device_register_full(&edma_dev_info);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int edma_pm_resume(struct device *dev)
-{
-	int i, j;
-
-	for (j = 0; j < arch_num_cc; j++) {
-		struct edma *cc = edma_cc[j];
-
-		s8 (*queue_priority_mapping)[2];
-
-		queue_priority_mapping = cc->info->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						 queue_priority_mapping[i][0],
-						 queue_priority_mapping[i][1]);
-
-		/*
-		 * Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < cc->num_channels; i++) {
-			if (test_bit(i, cc->edma_inuse)) {
-				/* ensure access through shadow region 0 */
-				edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
-					       BIT(i & 0x1f));
-
-				setup_dma_interrupt(i,
-						    cc->intr_data[i].callback,
-						    cc->intr_data[i].data);
-			}
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops edma_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
-};
-
-static struct platform_driver edma_driver = {
-	.driver = {
-		.name	= "edma",
-		.pm	= &edma_pm_ops,
-		.of_match_table = edma_of_ids,
-	},
-	.probe = edma_probe,
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 29e08aac8294..28c90bc372bd 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -147,150 +147,118 @@ static s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_cc0_info = {
+static struct edma_soc_info da8xx_edma0_pdata = {
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
-	&da830_edma_cc0_info,
+static struct edma_soc_info da850_edma1_pdata = {
+	.queue_priority_mapping	= da850_queue_priority_mapping,
+	.default_queue		= EVENTQ_0,
 };
 
-static struct edma_soc_info da850_edma_cc_info[] = {
+static struct resource da8xx_edma0_resources[] = {
 	{
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-		.default_queue		= EVENTQ_1,
-	},
-	{
-		.queue_priority_mapping	= da850_queue_priority_mapping,
-		.default_queue		= EVENTQ_0,
-	},
-};
-
-static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
-	&da850_edma_cc_info[0],
-	&da850_edma_cc_info[1],
-};
-
-static struct resource da830_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= DA8XX_TPCC_BASE,
 		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= DA8XX_TPTC0_BASE,
 		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= DA8XX_TPTC1_BASE,
 		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA8XX_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct resource da850_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource da850_edma1_resources[] = {
 	{
-		.name	= "edma_cc1",
+		.name	= "edma3_cc",
 		.start	= DA850_TPCC1_BASE,
 		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc0",
 		.start	= DA850_TPTC2_BASE,
 		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA850_CCINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma1_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA850_CCERRINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device da830_edma_device = {
+static const struct platform_device_info da8xx_edma0_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da830_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da830_edma_resources),
-	.resource	= da830_edma_resources,
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da8xx_edma0_resources,
+	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
+	.data		= &da8xx_edma0_pdata,
+	.size_data	= sizeof(da8xx_edma0_pdata),
 };
 
-static struct platform_device da850_edma_device = {
+static const struct platform_device_info da850_edma1_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da850_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da850_edma_resources),
-	.resource	= da850_edma_resources,
+	.id		= 1,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da850_edma1_resources,
+	.num_res	= ARRAY_SIZE(da850_edma1_resources),
+	.data		= &da850_edma1_pdata,
+	.size_data	= sizeof(da850_edma1_pdata),
 };
 
 int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	da830_edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	da8xx_edma0_pdata.rsv = rsv;
 
-	return platform_device_register(&da830_edma_device);
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 int __init da850_register_edma(struct edma_rsv_info *rsv[2])
 {
+	struct platform_device *edma_pdev;
+
 	if (rsv) {
-		da850_edma_cc_info[0].rsv = rsv[0];
-		da850_edma_cc_info[1].rsv = rsv[1];
+		da8xx_edma0_pdata.rsv = rsv[0];
+		da850_edma1_pdata.rsv = rsv[1];
 	}
 
-	return platform_device_register(&da850_edma_device);
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA0\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
+	edma_pdev = platform_device_register_full(&da850_edma1_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 static struct resource da8xx_i2c_resources0[] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 567dc56fe8cd..609950b8c191 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -569,61 +569,58 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm355_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
-       &edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using (or muxing) TC*_ERR */
 };
 
-static struct platform_device dm355_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm355_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm355_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm355_edma_pdata,
+	.size_data	= sizeof(dm355_edma_pdata),
 };
 
 static struct resource dm355_asp1_resources[] = {
@@ -1062,13 +1059,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	platform_device_register(&dm355_edma_device);
+	edma_pdev = platform_device_register_full(&dm355_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	ret = davinci_init_wdt();
 	if (ret)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6a890a8486d0..2068cbeaeb03 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -853,8 +853,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static s8
-dm365_queue_priority_mapping[][2] = {
+static s8 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
 	{1, 7},
@@ -863,53 +862,49 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm365_edma_pdata = {
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
 };
 
-static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -919,7 +914,7 @@ static struct resource edma_resources[] = {
 static struct platform_device dm365_edma_device = {
 	.name			= "edma",
 	.id			= 0,
-	.dev.platform_data	= dm365_edma_info,
+	.dev.platform_data	= &dm365_edma_pdata,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index dc52657909c4..d38f5049d56e 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -498,61 +498,58 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm644x_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm644x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm644x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm644x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm644x_edma_pdata,
+	.size_data	= sizeof(dm644x_edma_pdata),
 };
 
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
@@ -950,12 +947,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
-	platform_device_register(&dm644x_edma_device);
+	edma_pdev = platform_device_register_full(&dm644x_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3f842bb266d6..70eb42725eec 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -531,8 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static s8
-dm646x_queue_priority_mapping[][2] = {
+static s8 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
 	{1, 0},
@@ -541,65 +540,63 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static struct edma_soc_info dm646x_edma_pdata = {
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm646x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm646x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm646x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm646x_edma_pdata,
+	.size_data	= sizeof(dm646x_edma_pdata),
 };
 
 static struct resource dm646x_mcasp0_resources[] = {
@@ -936,9 +933,12 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 
 int __init dm646x_init_edma(struct edma_rsv_info *rsv)
 {
-	edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	dm646x_edma_pdata.rsv = rsv;
 
-	return platform_device_register(&dm646x_edma_device);
+	edma_pdev = platform_device_register_full(&dm646x_edma_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 void __init dm646x_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 07d2e100caab..e0b6736db984 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -90,7 +90,6 @@ config ARCH_OMAP2PLUS
 	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
-	select TI_PRIV_EDMA
 	select OMAP_IRQCHIP
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b4584757dae0..6a388a7c6429 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -486,7 +486,7 @@ config TI_EDMA
 	depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
-	select TI_PRIV_EDMA
+	select TI_DMA_CROSSBAR if ARCH_OMAP
 	default n
 	help
 	  Enable support for the TI EDMA controller. This DMA
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 558b0b4e7536..31722d436a42 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -25,28 +25,93 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/edma.h>
 
 #include "dmaengine.h"
 #include "virt-dma.h"
 
-/*
- * This will go away when the private EDMA API is folded
- * into this driver and the platform device(s) are
- * instantiated in the arch code. We can only get away
- * with this simplification because DA8XX may not be built
- * in the same kernel image with other DaVinci parts. This
- * avoids having to sprinkle dmaengine driver platform devices
- * and data throughout all the existing board files.
- */
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-#define EDMA_CTLRS	2
-#define EDMA_CHANS	32
-#else
-#define EDMA_CTLRS	1
-#define EDMA_CHANS	64
-#endif /* CONFIG_ARCH_DAVINCI_DA8XX */
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT		0x00
+#define PARM_SRC		0x04
+#define PARM_A_B_CNT		0x08
+#define PARM_DST		0x0c
+#define PARM_SRC_DST_BIDX	0x10
+#define PARM_LINK_BCNTRLD	0x14
+#define PARM_SRC_DST_CIDX	0x18
+#define PARM_CCNT		0x1c
+
+#define PARM_SIZE		0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER			0x00	/* 64 bits */
+#define SH_ECR			0x08	/* 64 bits */
+#define SH_ESR			0x10	/* 64 bits */
+#define SH_CER			0x18	/* 64 bits */
+#define SH_EER			0x20	/* 64 bits */
+#define SH_EECR			0x28	/* 64 bits */
+#define SH_EESR			0x30	/* 64 bits */
+#define SH_SER			0x38	/* 64 bits */
+#define SH_SECR			0x40	/* 64 bits */
+#define SH_IER			0x50	/* 64 bits */
+#define SH_IECR			0x58	/* 64 bits */
+#define SH_IESR			0x60	/* 64 bits */
+#define SH_IPR			0x68	/* 64 bits */
+#define SH_ICR			0x70	/* 64 bits */
+#define SH_IEVAL		0x78
+#define SH_QER			0x80
+#define SH_QEER			0x84
+#define SH_QEECR		0x88
+#define SH_QEESR		0x8c
+#define SH_QSER			0x90
+#define SH_QSECR		0x94
+#define SH_SIZE			0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV		0x0000
+#define EDMA_CCCFG		0x0004
+#define EDMA_QCHMAP		0x0200	/* 8 registers */
+#define EDMA_DMAQNUM		0x0240	/* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM		0x0260
+#define EDMA_QUETCMAP		0x0280
+#define EDMA_QUEPRI		0x0284
+#define EDMA_EMR		0x0300	/* 64 bits */
+#define EDMA_EMCR		0x0308	/* 64 bits */
+#define EDMA_QEMR		0x0310
+#define EDMA_QEMCR		0x0314
+#define EDMA_CCERR		0x0318
+#define EDMA_CCERRCLR		0x031c
+#define EDMA_EEVAL		0x0320
+#define EDMA_DRAE		0x0340	/* 4 x 64 bits*/
+#define EDMA_QRAE		0x0380	/* 4 registers */
+#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
+#define EDMA_QSTAT		0x0600	/* 2 registers */
+#define EDMA_QWMTHRA		0x0620
+#define EDMA_QWMTHRB		0x0624
+#define EDMA_CCSTAT		0x0640
+
+#define EDMA_M			0x1000	/* global channel registers */
+#define EDMA_ECR		0x1008
+#define EDMA_ECRH		0x100C
+#define EDMA_SHADOW0		0x2000	/* 4 shadow regions */
+#define EDMA_PARM		0x4000	/* PaRAM entries */
+
+#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_DCHMAP		0x0100  /* 64 registers */
+
+/* CCCFG register */
+#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
+#define GET_NUM_QDMACH(x)	(x & 0x70 >> 4) /* bits 4-6 */
+#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
+#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
+#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
+#define CHMAP_EXIST		BIT(24)
 
 /*
  * Max of 20 segments per channel to conserve PaRAM slots
@@ -59,6 +124,37 @@
 #define EDMA_MAX_SLOTS		MAX_NR_SG
 #define EDMA_DESCRIPTORS	16
 
+#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+	u32 opt;
+	u32 src;
+	u32 a_b_cnt;
+	u32 dst;
+	u32 src_dst_bidx;
+	u32 link_bcntrld;
+	u32 src_dst_cidx;
+	u32 ccnt;
+} __packed;
+
+/* fields in edmacc_param.opt */
+#define SAM		BIT(0)
+#define DAM		BIT(1)
+#define SYNCDIM		BIT(2)
+#define STATIC		BIT(3)
+#define EDMA_FWID	(0x07 << 8)
+#define TCCMODE		BIT(11)
+#define EDMA_TCC(t)	((t) << 12)
+#define TCINTEN		BIT(20)
+#define ITCINTEN	BIT(21)
+#define TCCHEN		BIT(22)
+#define ITCCHEN		BIT(23)
+
 struct edma_pset {
 	u32				len;
 	dma_addr_t			addr;
@@ -105,26 +201,519 @@ struct edma_desc {
 
 struct edma_cc;
 
+struct edma_tc {
+	struct device_node		*node;
+	u16				id;
+};
+
 struct edma_chan {
 	struct virt_dma_chan		vchan;
 	struct list_head		node;
 	struct edma_desc		*edesc;
 	struct edma_cc			*ecc;
+	struct edma_tc			*tc;
 	int				ch_num;
 	bool				alloced;
+	bool				hw_triggered;
 	int				slot[EDMA_MAX_SLOTS];
 	int				missed;
 	struct dma_slave_config		cfg;
 };
 
 struct edma_cc {
-	int				ctlr;
+	struct device			*dev;
+	struct edma_soc_info		*info;
+	void __iomem			*base;
+	int				id;
+	bool				legacy_mode;
+
+	/* eDMA3 resource information */
+	unsigned			num_channels;
+	unsigned			num_qchannels;
+	unsigned			num_region;
+	unsigned			num_slots;
+	unsigned			num_tc;
+	bool				chmap_exist;
+	enum dma_event_q		default_queue;
+
+	/*
+	 * The slot_inuse bit for each PaRAM slot is clear unless the slot is
+	 * in use by Linux or if it is allocated to be used by DSP.
+	 */
+	unsigned long *slot_inuse;
+
 	struct dma_device		dma_slave;
-	struct edma_chan		slave_chans[EDMA_CHANS];
-	int				num_slave_chans;
+	struct dma_device		*dma_memcpy;
+	struct edma_chan		*slave_chans;
+	struct edma_tc			*tc_list;
 	int				dummy_slot;
 };
 
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+	.link_bcntrld = 0xffff,
+	.ccnt = 1,
+};
+
+#define EDMA_BINDING_LEGACY	0
+#define EDMA_BINDING_TPCC	1
+static const struct of_device_id edma_of_ids[] = {
+	{
+		.compatible = "ti,edma3",
+		.data = (void *)EDMA_BINDING_LEGACY,
+	},
+	{
+		.compatible = "ti,edma3-tpcc",
+		.data = (void *)EDMA_BINDING_TPCC,
+	},
+	{}
+};
+
+static inline unsigned int edma_read(struct edma_cc *ecc, int offset)
+{
+	return (unsigned int)__raw_readl(ecc->base + offset);
+}
+
+static inline void edma_write(struct edma_cc *ecc, int offset, int val)
+{
+	__raw_writel(val, ecc->base + offset);
+}
+
+static inline void edma_modify(struct edma_cc *ecc, int offset, unsigned and,
+			       unsigned or)
+{
+	unsigned val = edma_read(ecc, offset);
+
+	val &= and;
+	val |= or;
+	edma_write(ecc, offset, val);
+}
+
+static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
+{
+	unsigned val = edma_read(ecc, offset);
+
+	val &= and;
+	edma_write(ecc, offset, val);
+}
+
+static inline void edma_or(struct edma_cc *ecc, int offset, unsigned or)
+{
+	unsigned val = edma_read(ecc, offset);
+
+	val |= or;
+	edma_write(ecc, offset, val);
+}
+
+static inline unsigned int edma_read_array(struct edma_cc *ecc, int offset,
+					   int i)
+{
+	return edma_read(ecc, offset + (i << 2));
+}
+
+static inline void edma_write_array(struct edma_cc *ecc, int offset, int i,
+				    unsigned val)
+{
+	edma_write(ecc, offset + (i << 2), val);
+}
+
+static inline void edma_modify_array(struct edma_cc *ecc, int offset, int i,
+				     unsigned and, unsigned or)
+{
+	edma_modify(ecc, offset + (i << 2), and, or);
+}
+
+static inline void edma_or_array(struct edma_cc *ecc, int offset, int i,
+				 unsigned or)
+{
+	edma_or(ecc, offset + (i << 2), or);
+}
+
+static inline void edma_or_array2(struct edma_cc *ecc, int offset, int i, int j,
+				  unsigned or)
+{
+	edma_or(ecc, offset + ((i * 2 + j) << 2), or);
+}
+
+static inline void edma_write_array2(struct edma_cc *ecc, int offset, int i,
+				     int j, unsigned val)
+{
+	edma_write(ecc, offset + ((i * 2 + j) << 2), val);
+}
+
+static inline unsigned int edma_shadow0_read(struct edma_cc *ecc, int offset)
+{
+	return edma_read(ecc, EDMA_SHADOW0 + offset);
+}
+
+static inline unsigned int edma_shadow0_read_array(struct edma_cc *ecc,
+						   int offset, int i)
+{
+	return edma_read(ecc, EDMA_SHADOW0 + offset + (i << 2));
+}
+
+static inline void edma_shadow0_write(struct edma_cc *ecc, int offset,
+				      unsigned val)
+{
+	edma_write(ecc, EDMA_SHADOW0 + offset, val);
+}
+
+static inline void edma_shadow0_write_array(struct edma_cc *ecc, int offset,
+					    int i, unsigned val)
+{
+	edma_write(ecc, EDMA_SHADOW0 + offset + (i << 2), val);
+}
+
+static inline unsigned int edma_param_read(struct edma_cc *ecc, int offset,
+					   int param_no)
+{
+	return edma_read(ecc, EDMA_PARM + offset + (param_no << 5));
+}
+
+static inline void edma_param_write(struct edma_cc *ecc, int offset,
+				    int param_no, unsigned val)
+{
+	edma_write(ecc, EDMA_PARM + offset + (param_no << 5), val);
+}
+
+static inline void edma_param_modify(struct edma_cc *ecc, int offset,
+				     int param_no, unsigned and, unsigned or)
+{
+	edma_modify(ecc, EDMA_PARM + offset + (param_no << 5), and, or);
+}
+
+static inline void edma_param_and(struct edma_cc *ecc, int offset, int param_no,
+				  unsigned and)
+{
+	edma_and(ecc, EDMA_PARM + offset + (param_no << 5), and);
+}
+
+static inline void edma_param_or(struct edma_cc *ecc, int offset, int param_no,
+				 unsigned or)
+{
+	edma_or(ecc, EDMA_PARM + offset + (param_no << 5), or);
+}
+
+static inline void set_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		set_bit(offset + (len - 1), p);
+}
+
+static inline void clear_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		clear_bit(offset + (len - 1), p);
+}
+
+static void edma_assign_priority_to_queue(struct edma_cc *ecc, int queue_no,
+					  int priority)
+{
+	int bit = queue_no * 4;
+
+	edma_modify(ecc, EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static void edma_set_chmap(struct edma_chan *echan, int slot)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+
+	if (ecc->chmap_exist) {
+		slot = EDMA_CHAN_SLOT(slot);
+		edma_write_array(ecc, EDMA_DCHMAP, channel, (slot << 5));
+	}
+}
+
+static void edma_setup_interrupt(struct edma_chan *echan, bool enable)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+
+	if (enable) {
+		edma_shadow0_write_array(ecc, SH_ICR, channel >> 5,
+					 BIT(channel & 0x1f));
+		edma_shadow0_write_array(ecc, SH_IESR, channel >> 5,
+					 BIT(channel & 0x1f));
+	} else {
+		edma_shadow0_write_array(ecc, SH_IECR, channel >> 5,
+					 BIT(channel & 0x1f));
+	}
+}
+
+/*
+ * paRAM slot management functions
+ */
+static void edma_write_slot(struct edma_cc *ecc, unsigned slot,
+			    const struct edmacc_param *param)
+{
+	slot = EDMA_CHAN_SLOT(slot);
+	if (slot >= ecc->num_slots)
+		return;
+	memcpy_toio(ecc->base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+
+static void edma_read_slot(struct edma_cc *ecc, unsigned slot,
+			   struct edmacc_param *param)
+{
+	slot = EDMA_CHAN_SLOT(slot);
+	if (slot >= ecc->num_slots)
+		return;
+	memcpy_fromio(param, ecc->base + PARM_OFFSET(slot), PARM_SIZE);
+}
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @ecc: pointer to edma_cc struct
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer.  Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+static int edma_alloc_slot(struct edma_cc *ecc, int slot)
+{
+	if (slot > 0) {
+		slot = EDMA_CHAN_SLOT(slot);
+		/* Requesting entry paRAM slot for a HW triggered channel. */
+		if (ecc->chmap_exist && slot < ecc->num_channels)
+			slot = EDMA_SLOT_ANY;
+	}
+
+	if (slot < 0) {
+		if (ecc->chmap_exist)
+			slot = 0;
+		else
+			slot = ecc->num_channels;
+		for (;;) {
+			slot = find_next_zero_bit(ecc->slot_inuse,
+						  ecc->num_slots,
+						  slot);
+			if (slot == ecc->num_slots)
+				return -ENOMEM;
+			if (!test_and_set_bit(slot, ecc->slot_inuse))
+				break;
+		}
+	} else if (slot >= ecc->num_slots) {
+		return -EINVAL;
+	} else if (test_and_set_bit(slot, ecc->slot_inuse)) {
+		return -EBUSY;
+	}
+
+	edma_write_slot(ecc, slot, &dummy_paramset);
+
+	return EDMA_CTLR_CHAN(ecc->id, slot);
+}
+
+static void edma_free_slot(struct edma_cc *ecc, unsigned slot)
+{
+	slot = EDMA_CHAN_SLOT(slot);
+	if (slot >= ecc->num_slots)
+		return;
+
+	edma_write_slot(ecc, slot, &dummy_paramset);
+	clear_bit(slot, ecc->slot_inuse);
+}
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @ecc: pointer to edma_cc struct
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+static void edma_link(struct edma_cc *ecc, unsigned from, unsigned to)
+{
+	if (unlikely(EDMA_CTLR(from) != EDMA_CTLR(to)))
+		dev_warn(ecc->dev, "Ignoring eDMA instance for linking\n");
+
+	from = EDMA_CHAN_SLOT(from);
+	to = EDMA_CHAN_SLOT(to);
+	if (from >= ecc->num_slots || to >= ecc->num_slots)
+		return;
+
+	edma_param_modify(ecc, PARM_LINK_BCNTRLD, from, 0xffff0000,
+			  PARM_OFFSET(to));
+}
+
+/**
+ * edma_get_position - returns the current transfer point
+ * @ecc: pointer to edma_cc struct
+ * @slot: parameter RAM slot being examined
+ * @dst:  true selects the dest position, false the source
+ *
+ * Returns the position of the current active slot
+ */
+static dma_addr_t edma_get_position(struct edma_cc *ecc, unsigned slot,
+				    bool dst)
+{
+	u32 offs;
+
+	slot = EDMA_CHAN_SLOT(slot);
+	offs = PARM_OFFSET(slot);
+	offs += dst ? PARM_DST : PARM_SRC;
+
+	return edma_read(ecc, offs);
+}
+
+/*
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software.  (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ */
+static void edma_start(struct edma_chan *echan)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	int j = (channel >> 5);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	if (!echan->hw_triggered) {
+		/* EDMA channels without event association */
+		dev_dbg(ecc->dev, "ESR%d %08x\n", j,
+			edma_shadow0_read_array(ecc, SH_ESR, j));
+		edma_shadow0_write_array(ecc, SH_ESR, j, mask);
+	} else {
+		/* EDMA channel with event association */
+		dev_dbg(ecc->dev, "ER%d %08x\n", j,
+			edma_shadow0_read_array(ecc, SH_ER, j));
+		/* Clear any pending event or error */
+		edma_write_array(ecc, EDMA_ECR, j, mask);
+		edma_write_array(ecc, EDMA_EMCR, j, mask);
+		/* Clear any SER */
+		edma_shadow0_write_array(ecc, SH_SECR, j, mask);
+		edma_shadow0_write_array(ecc, SH_EESR, j, mask);
+		dev_dbg(ecc->dev, "EER%d %08x\n", j,
+			edma_shadow0_read_array(ecc, SH_EER, j));
+	}
+}
+
+static void edma_stop(struct edma_chan *echan)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	int j = (channel >> 5);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(ecc, SH_EECR, j, mask);
+	edma_shadow0_write_array(ecc, SH_ECR, j, mask);
+	edma_shadow0_write_array(ecc, SH_SECR, j, mask);
+	edma_write_array(ecc, EDMA_EMCR, j, mask);
+
+	/* clear possibly pending completion interrupt */
+	edma_shadow0_write_array(ecc, SH_ICR, j, mask);
+
+	dev_dbg(ecc->dev, "EER%d %08x\n", j,
+		edma_shadow0_read_array(ecc, SH_EER, j));
+
+	/* REVISIT:  consider guarding against inappropriate event
+	 * chaining by overwriting with dummy_paramset.
+	 */
+}
+
+/*
+ * Temporarily disable EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers
+ */
+static void edma_pause(struct edma_chan *echan)
+{
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(echan->ecc, SH_EECR, channel >> 5, mask);
+}
+
+/* Re-enable EDMA hardware events on the specified channel.  */
+static void edma_resume(struct edma_chan *echan)
+{
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(echan->ecc, SH_EESR, channel >> 5, mask);
+}
+
+static void edma_trigger_channel(struct edma_chan *echan)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(ecc, SH_ESR, (channel >> 5), mask);
+
+	dev_dbg(ecc->dev, "ESR%d %08x\n", (channel >> 5),
+		edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
+}
+
+static void edma_clean_channel(struct edma_chan *echan)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	int j = (channel >> 5);
+	unsigned int mask = BIT(channel & 0x1f);
+
+	dev_dbg(ecc->dev, "EMR%d %08x\n", j, edma_read_array(ecc, EDMA_EMR, j));
+	edma_shadow0_write_array(ecc, SH_ECR, j, mask);
+	/* Clear the corresponding EMR bits */
+	edma_write_array(ecc, EDMA_EMCR, j, mask);
+	/* Clear any SER */
+	edma_shadow0_write_array(ecc, SH_SECR, j, mask);
+	edma_write(ecc, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
+}
+
+/* Move channel to a specific event queue */
+static void edma_assign_channel_eventq(struct edma_chan *echan,
+				       enum dma_event_q eventq_no)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+	int bit = (channel & 0x7) * 4;
+
+	/* default to low priority queue */
+	if (eventq_no == EVENTQ_DEFAULT)
+		eventq_no = ecc->default_queue;
+	if (eventq_no >= ecc->num_tc)
+		return;
+
+	eventq_no &= 7;
+	edma_modify_array(ecc, EDMA_DMAQNUM, (channel >> 3), ~(0x7 << bit),
+			  eventq_no << bit);
+}
+
+static int edma_alloc_channel(struct edma_chan *echan,
+			      enum dma_event_q eventq_no)
+{
+	struct edma_cc *ecc = echan->ecc;
+	int channel = EDMA_CHAN_SLOT(echan->ch_num);
+
+	/* ensure access through shadow region 0 */
+	edma_or_array2(ecc, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
+
+	/* ensure no events are pending */
+	edma_stop(echan);
+
+	edma_setup_interrupt(echan, true);
+
+	edma_assign_channel_eventq(echan, eventq_no);
+
+	return 0;
+}
+
+static void edma_free_channel(struct edma_chan *echan)
+{
+	/* ensure no events are pending */
+	edma_stop(echan);
+	/* REVISIT should probably take out of shadow region 0 */
+	edma_setup_interrupt(echan, false);
+}
+
 static inline struct edma_cc *to_edma_cc(struct dma_device *d)
 {
 	return container_of(d, struct edma_cc, dma_slave);
@@ -135,8 +724,7 @@ static inline struct edma_chan *to_edma_chan(struct dma_chan *c)
 	return container_of(c, struct edma_chan, vchan.chan);
 }
 
-static inline struct edma_desc
-*to_edma_desc(struct dma_async_tx_descriptor *tx)
+static inline struct edma_desc *to_edma_desc(struct dma_async_tx_descriptor *tx)
 {
 	return container_of(tx, struct edma_desc, vdesc.tx);
 }
@@ -149,20 +737,17 @@ static void edma_desc_free(struct virt_dma_desc *vdesc)
 /* Dispatch a queued descriptor to the controller (caller holds lock) */
 static void edma_execute(struct edma_chan *echan)
 {
+	struct edma_cc *ecc = echan->ecc;
 	struct virt_dma_desc *vdesc;
 	struct edma_desc *edesc;
 	struct device *dev = echan->vchan.chan.device->dev;
 	int i, j, left, nslots;
 
-	/* If either we processed all psets or we're still not started */
-	if (!echan->edesc ||
-	    echan->edesc->pset_nr == echan->edesc->processed) {
-		/* Get next vdesc */
+	if (!echan->edesc) {
+		/* Setup is needed for the first transfer */
 		vdesc = vchan_next_desc(&echan->vchan);
-		if (!vdesc) {
-			echan->edesc = NULL;
+		if (!vdesc)
 			return;
-		}
 		list_del(&vdesc->node);
 		echan->edesc = to_edma_desc(&vdesc->tx);
 	}
@@ -177,32 +762,32 @@ static void edma_execute(struct edma_chan *echan)
 	/* Write descriptor PaRAM set(s) */
 	for (i = 0; i < nslots; i++) {
 		j = i + edesc->processed;
-		edma_write_slot(echan->slot[i], &edesc->pset[j].param);
+		edma_write_slot(ecc, echan->slot[i], &edesc->pset[j].param);
 		edesc->sg_len += edesc->pset[j].len;
-		dev_vdbg(echan->vchan.chan.device->dev,
-			"\n pset[%d]:\n"
-			"  chnum\t%d\n"
-			"  slot\t%d\n"
-			"  opt\t%08x\n"
-			"  src\t%08x\n"
-			"  dst\t%08x\n"
-			"  abcnt\t%08x\n"
-			"  ccnt\t%08x\n"
-			"  bidx\t%08x\n"
-			"  cidx\t%08x\n"
-			"  lkrld\t%08x\n",
-			j, echan->ch_num, echan->slot[i],
-			edesc->pset[j].param.opt,
-			edesc->pset[j].param.src,
-			edesc->pset[j].param.dst,
-			edesc->pset[j].param.a_b_cnt,
-			edesc->pset[j].param.ccnt,
-			edesc->pset[j].param.src_dst_bidx,
-			edesc->pset[j].param.src_dst_cidx,
-			edesc->pset[j].param.link_bcntrld);
+		dev_vdbg(dev,
+			 "\n pset[%d]:\n"
+			 "  chnum\t%d\n"
+			 "  slot\t%d\n"
+			 "  opt\t%08x\n"
+			 "  src\t%08x\n"
+			 "  dst\t%08x\n"
+			 "  abcnt\t%08x\n"
+			 "  ccnt\t%08x\n"
+			 "  bidx\t%08x\n"
+			 "  cidx\t%08x\n"
+			 "  lkrld\t%08x\n",
+			 j, echan->ch_num, echan->slot[i],
+			 edesc->pset[j].param.opt,
+			 edesc->pset[j].param.src,
+			 edesc->pset[j].param.dst,
+			 edesc->pset[j].param.a_b_cnt,
+			 edesc->pset[j].param.ccnt,
+			 edesc->pset[j].param.src_dst_bidx,
+			 edesc->pset[j].param.src_dst_cidx,
+			 edesc->pset[j].param.link_bcntrld);
 		/* Link to the previous slot if not the last set */
 		if (i != (nslots - 1))
-			edma_link(echan->slot[i], echan->slot[i+1]);
+			edma_link(ecc, echan->slot[i], echan->slot[i + 1]);
 	}
 
 	edesc->processed += nslots;
@@ -214,34 +799,32 @@ static void edma_execute(struct edma_chan *echan)
 	 */
 	if (edesc->processed == edesc->pset_nr) {
 		if (edesc->cyclic)
-			edma_link(echan->slot[nslots-1], echan->slot[1]);
+			edma_link(ecc, echan->slot[nslots - 1], echan->slot[1]);
 		else
-			edma_link(echan->slot[nslots-1],
+			edma_link(ecc, echan->slot[nslots - 1],
 				  echan->ecc->dummy_slot);
 	}
 
-	if (edesc->processed <= MAX_NR_SG) {
+	if (echan->missed) {
+		/*
+		 * This happens due to setup times between intermediate
+		 * transfers in long SG lists which have to be broken up into
+		 * transfers of MAX_NR_SG
+		 */
+		dev_dbg(dev, "missed event on channel %d\n", echan->ch_num);
+		edma_clean_channel(echan);
+		edma_stop(echan);
+		edma_start(echan);
+		edma_trigger_channel(echan);
+		echan->missed = 0;
+	} else if (edesc->processed <= MAX_NR_SG) {
 		dev_dbg(dev, "first transfer starting on channel %d\n",
 			echan->ch_num);
-		edma_start(echan->ch_num);
+		edma_start(echan);
 	} else {
 		dev_dbg(dev, "chan: %d: completed %d elements, resuming\n",
 			echan->ch_num, edesc->processed);
-		edma_resume(echan->ch_num);
-	}
-
-	/*
-	 * This happens due to setup times between intermediate transfers
-	 * in long SG lists which have to be broken up into transfers of
-	 * MAX_NR_SG
-	 */
-	if (echan->missed) {
-		dev_dbg(dev, "missed event on channel %d\n", echan->ch_num);
-		edma_clean_channel(echan->ch_num);
-		edma_stop(echan->ch_num);
-		edma_start(echan->ch_num);
-		edma_trigger_channel(echan->ch_num);
-		echan->missed = 0;
+		edma_resume(echan);
 	}
 }
 
@@ -259,20 +842,16 @@ static int edma_terminate_all(struct dma_chan *chan)
 	 * echan->edesc is NULL and exit.)
 	 */
 	if (echan->edesc) {
-		int cyclic = echan->edesc->cyclic;
-
+		edma_stop(echan);
+		/* Move the cyclic channel back to default queue */
+		if (!echan->tc && echan->edesc->cyclic)
+			edma_assign_channel_eventq(echan, EVENTQ_DEFAULT);
 		/*
 		 * free the running request descriptor
 		 * since it is not in any of the vdesc lists
 		 */
 		edma_desc_free(&echan->edesc->vdesc);
-
 		echan->edesc = NULL;
-		edma_stop(echan->ch_num);
-		/* Move the cyclic channel back to default queue */
-		if (cyclic)
-			edma_assign_channel_eventq(echan->ch_num,
-						   EVENTQ_DEFAULT);
 	}
 
 	vchan_get_all_descriptors(&echan->vchan, &head);
@@ -303,7 +882,7 @@ static int edma_dma_pause(struct dma_chan *chan)
 	if (!echan->edesc)
 		return -EINVAL;
 
-	edma_pause(echan->ch_num);
+	edma_pause(echan);
 	return 0;
 }
 
@@ -311,7 +890,7 @@ static int edma_dma_resume(struct dma_chan *chan)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
 
-	edma_resume(echan->ch_num);
+	edma_resume(echan);
 	return 0;
 }
 
@@ -327,19 +906,17 @@ static int edma_dma_resume(struct dma_chan *chan)
  * @direction: Direction of the transfer
  */
 static int edma_config_pset(struct dma_chan *chan, struct edma_pset *epset,
-	dma_addr_t src_addr, dma_addr_t dst_addr, u32 burst,
-	enum dma_slave_buswidth dev_width, unsigned int dma_length,
-	enum dma_transfer_direction direction)
+			    dma_addr_t src_addr, dma_addr_t dst_addr, u32 burst,
+			    unsigned int acnt, unsigned int dma_length,
+			    enum dma_transfer_direction direction)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
 	struct device *dev = chan->device->dev;
 	struct edmacc_param *param = &epset->param;
-	int acnt, bcnt, ccnt, cidx;
+	int bcnt, ccnt, cidx;
 	int src_bidx, dst_bidx, src_cidx, dst_cidx;
 	int absync;
 
-	acnt = dev_width;
-
 	/* src/dst_maxburst == 0 is the same case as src/dst_maxburst == 1 */
 	if (!burst)
 		burst = 1;
@@ -475,8 +1052,8 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 		return NULL;
 	}
 
-	edesc = kzalloc(sizeof(*edesc) + sg_len *
-		sizeof(edesc->pset[0]), GFP_ATOMIC);
+	edesc = kzalloc(sizeof(*edesc) + sg_len * sizeof(edesc->pset[0]),
+			GFP_ATOMIC);
 	if (!edesc) {
 		dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__);
 		return NULL;
@@ -493,8 +1070,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 	for (i = 0; i < nslots; i++) {
 		if (echan->slot[i] < 0) {
 			echan->slot[i] =
-				edma_alloc_slot(EDMA_CTLR(echan->ch_num),
-						EDMA_SLOT_ANY);
+				edma_alloc_slot(echan->ecc, EDMA_SLOT_ANY);
 			if (echan->slot[i] < 0) {
 				kfree(edesc);
 				dev_err(dev, "%s: Failed to allocate slot\n",
@@ -541,36 +1117,98 @@ static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
 	struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
 	size_t len, unsigned long tx_flags)
 {
-	int ret;
+	int ret, nslots;
 	struct edma_desc *edesc;
 	struct device *dev = chan->device->dev;
 	struct edma_chan *echan = to_edma_chan(chan);
+	unsigned int width, pset_len;
 
 	if (unlikely(!echan || !len))
 		return NULL;
 
-	edesc = kzalloc(sizeof(*edesc) + sizeof(edesc->pset[0]), GFP_ATOMIC);
+	if (len < SZ_64K) {
+		/*
+		 * Transfer size less than 64K can be handled with one paRAM
+		 * slot and with one burst.
+		 * ACNT = length
+		 */
+		width = len;
+		pset_len = len;
+		nslots = 1;
+	} else {
+		/*
+		 * Transfer size bigger than 64K will be handled with maximum of
+		 * two paRAM slots.
+		 * slot1: (full_length / 32767) times 32767 bytes bursts.
+		 *	  ACNT = 32767, length1: (full_length / 32767) * 32767
+		 * slot2: the remaining amount of data after slot1.
+		 *	  ACNT = full_length - length1, length2 = ACNT
+		 *
+		 * When the full_length is multibple of 32767 one slot can be
+		 * used to complete the transfer.
+		 */
+		width = SZ_32K - 1;
+		pset_len = rounddown(len, width);
+		/* One slot is enough for lengths multiple of (SZ_32K -1) */
+		if (unlikely(pset_len == len))
+			nslots = 1;
+		else
+			nslots = 2;
+	}
+
+	edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
+			GFP_ATOMIC);
 	if (!edesc) {
 		dev_dbg(dev, "Failed to allocate a descriptor\n");
 		return NULL;
 	}
 
-	edesc->pset_nr = 1;
+	edesc->pset_nr = nslots;
+	edesc->residue = edesc->residue_stat = len;
+	edesc->direction = DMA_MEM_TO_MEM;
+	edesc->echan = echan;
 
 	ret = edma_config_pset(chan, &edesc->pset[0], src, dest, 1,
-			       DMA_SLAVE_BUSWIDTH_4_BYTES, len, DMA_MEM_TO_MEM);
-	if (ret < 0)
+			       width, pset_len, DMA_MEM_TO_MEM);
+	if (ret < 0) {
+		kfree(edesc);
 		return NULL;
+	}
 
 	edesc->absync = ret;
 
-	/*
-	 * Enable intermediate transfer chaining to re-trigger channel
-	 * on completion of every TR, and enable transfer-completion
-	 * interrupt on completion of the whole transfer.
-	 */
 	edesc->pset[0].param.opt |= ITCCHEN;
-	edesc->pset[0].param.opt |= TCINTEN;
+	if (nslots == 1) {
+		/* Enable transfer complete interrupt */
+		edesc->pset[0].param.opt |= TCINTEN;
+	} else {
+		/* Enable transfer complete chaining for the first slot */
+		edesc->pset[0].param.opt |= TCCHEN;
+
+		if (echan->slot[1] < 0) {
+			echan->slot[1] = edma_alloc_slot(echan->ecc,
+							 EDMA_SLOT_ANY);
+			if (echan->slot[1] < 0) {
+				kfree(edesc);
+				dev_err(dev, "%s: Failed to allocate slot\n",
+					__func__);
+				return NULL;
+			}
+		}
+		dest += pset_len;
+		src += pset_len;
+		pset_len = width = len % (SZ_32K - 1);
+
+		ret = edma_config_pset(chan, &edesc->pset[1], src, dest, 1,
+				       width, pset_len, DMA_MEM_TO_MEM);
+		if (ret < 0) {
+			kfree(edesc);
+			return NULL;
+		}
+
+		edesc->pset[1].param.opt |= ITCCHEN;
+		edesc->pset[1].param.opt |= TCINTEN;
+	}
 
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
@@ -629,8 +1267,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	if (nslots > MAX_NR_SG)
 		return NULL;
 
-	edesc = kzalloc(sizeof(*edesc) + nslots *
-		sizeof(edesc->pset[0]), GFP_ATOMIC);
+	edesc = kzalloc(sizeof(*edesc) + nslots * sizeof(edesc->pset[0]),
+			GFP_ATOMIC);
 	if (!edesc) {
 		dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__);
 		return NULL;
@@ -649,8 +1287,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		/* Allocate a PaRAM slot, if needed */
 		if (echan->slot[i] < 0) {
 			echan->slot[i] =
-				edma_alloc_slot(EDMA_CTLR(echan->ch_num),
-						EDMA_SLOT_ANY);
+				edma_alloc_slot(echan->ecc, EDMA_SLOT_ANY);
 			if (echan->slot[i] < 0) {
 				kfree(edesc);
 				dev_err(dev, "%s: Failed to allocate slot\n",
@@ -711,128 +1348,281 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	}
 
 	/* Place the cyclic channel to highest priority queue */
-	edma_assign_channel_eventq(echan->ch_num, EVENTQ_0);
+	if (!echan->tc)
+		edma_assign_channel_eventq(echan, EVENTQ_0);
 
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
 
-static void edma_callback(unsigned ch_num, u16 ch_status, void *data)
+static void edma_completion_handler(struct edma_chan *echan)
 {
-	struct edma_chan *echan = data;
 	struct device *dev = echan->vchan.chan.device->dev;
-	struct edma_desc *edesc;
-	struct edmacc_param p;
+	struct edma_desc *edesc = echan->edesc;
 
-	edesc = echan->edesc;
+	if (!edesc)
+		return;
 
-	/* Pause the channel for non-cyclic */
-	if (!edesc || !edesc->cyclic)
-		edma_pause(echan->ch_num);
-
-	switch (ch_status) {
-	case EDMA_DMA_COMPLETE:
-		spin_lock(&echan->vchan.lock);
-
-		if (edesc) {
-			if (edesc->cyclic) {
-				vchan_cyclic_callback(&edesc->vdesc);
-			} else if (edesc->processed == edesc->pset_nr) {
-				dev_dbg(dev, "Transfer complete, stopping channel %d\n", ch_num);
-				edesc->residue = 0;
-				edma_stop(echan->ch_num);
-				vchan_cookie_complete(&edesc->vdesc);
-				edma_execute(echan);
-			} else {
-				dev_dbg(dev, "Intermediate transfer complete on channel %d\n", ch_num);
-
-				/* Update statistics for tx_status */
-				edesc->residue -= edesc->sg_len;
-				edesc->residue_stat = edesc->residue;
-				edesc->processed_stat = edesc->processed;
-
-				edma_execute(echan);
-			}
+	spin_lock(&echan->vchan.lock);
+	if (edesc->cyclic) {
+		vchan_cyclic_callback(&edesc->vdesc);
+		spin_unlock(&echan->vchan.lock);
+		return;
+	} else if (edesc->processed == edesc->pset_nr) {
+		edesc->residue = 0;
+		edma_stop(echan);
+		vchan_cookie_complete(&edesc->vdesc);
+		echan->edesc = NULL;
+
+		dev_dbg(dev, "Transfer completed on channel %d\n",
+			echan->ch_num);
+	} else {
+		dev_dbg(dev, "Sub transfer completed on channel %d\n",
+			echan->ch_num);
+
+		edma_pause(echan);
+
+		/* Update statistics for tx_status */
+		edesc->residue -= edesc->sg_len;
+		edesc->residue_stat = edesc->residue;
+		edesc->processed_stat = edesc->processed;
+	}
+	edma_execute(echan);
+
+	spin_unlock(&echan->vchan.lock);
+}
+
+/* eDMA interrupt handler */
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+	struct edma_cc *ecc = data;
+	int ctlr;
+	u32 sh_ier;
+	u32 sh_ipr;
+	u32 bank;
+
+	ctlr = ecc->id;
+	if (ctlr < 0)
+		return IRQ_NONE;
+
+	dev_vdbg(ecc->dev, "dma_irq_handler\n");
+
+	sh_ipr = edma_shadow0_read_array(ecc, SH_IPR, 0);
+	if (!sh_ipr) {
+		sh_ipr = edma_shadow0_read_array(ecc, SH_IPR, 1);
+		if (!sh_ipr)
+			return IRQ_NONE;
+		sh_ier = edma_shadow0_read_array(ecc, SH_IER, 1);
+		bank = 1;
+	} else {
+		sh_ier = edma_shadow0_read_array(ecc, SH_IER, 0);
+		bank = 0;
+	}
+
+	do {
+		u32 slot;
+		u32 channel;
+
+		slot = __ffs(sh_ipr);
+		sh_ipr &= ~(BIT(slot));
+
+		if (sh_ier & BIT(slot)) {
+			channel = (bank << 5) | slot;
+			/* Clear the corresponding IPR bits */
+			edma_shadow0_write_array(ecc, SH_ICR, bank, BIT(slot));
+			edma_completion_handler(&ecc->slave_chans[channel]);
 		}
+	} while (sh_ipr);
 
-		spin_unlock(&echan->vchan.lock);
+	edma_shadow0_write(ecc, SH_IEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+static void edma_error_handler(struct edma_chan *echan)
+{
+	struct edma_cc *ecc = echan->ecc;
+	struct device *dev = echan->vchan.chan.device->dev;
+	struct edmacc_param p;
 
-		break;
-	case EDMA_DMA_CC_ERROR:
-		spin_lock(&echan->vchan.lock);
+	if (!echan->edesc)
+		return;
 
-		edma_read_slot(EDMA_CHAN_SLOT(echan->slot[0]), &p);
+	spin_lock(&echan->vchan.lock);
 
+	edma_read_slot(ecc, echan->slot[0], &p);
+	/*
+	 * Issue later based on missed flag which will be sure
+	 * to happen as:
+	 * (1) we finished transmitting an intermediate slot and
+	 *     edma_execute is coming up.
+	 * (2) or we finished current transfer and issue will
+	 *     call edma_execute.
+	 *
+	 * Important note: issuing can be dangerous here and
+	 * lead to some nasty recursion when we are in a NULL
+	 * slot. So we avoid doing so and set the missed flag.
+	 */
+	if (p.a_b_cnt == 0 && p.ccnt == 0) {
+		dev_dbg(dev, "Error on null slot, setting miss\n");
+		echan->missed = 1;
+	} else {
 		/*
-		 * Issue later based on missed flag which will be sure
-		 * to happen as:
-		 * (1) we finished transmitting an intermediate slot and
-		 *     edma_execute is coming up.
-		 * (2) or we finished current transfer and issue will
-		 *     call edma_execute.
-		 *
-		 * Important note: issuing can be dangerous here and
-		 * lead to some nasty recursion when we are in a NULL
-		 * slot. So we avoid doing so and set the missed flag.
+		 * The slot is already programmed but the event got
+		 * missed, so its safe to issue it here.
 		 */
-		if (p.a_b_cnt == 0 && p.ccnt == 0) {
-			dev_dbg(dev, "Error occurred, looks like slot is null, just setting miss\n");
-			echan->missed = 1;
-		} else {
-			/*
-			 * The slot is already programmed but the event got
-			 * missed, so its safe to issue it here.
-			 */
-			dev_dbg(dev, "Error occurred but slot is non-null, TRIGGERING\n");
-			edma_clean_channel(echan->ch_num);
-			edma_stop(echan->ch_num);
-			edma_start(echan->ch_num);
-			edma_trigger_channel(echan->ch_num);
+		dev_dbg(dev, "Missed event, TRIGGERING\n");
+		edma_clean_channel(echan);
+		edma_stop(echan);
+		edma_start(echan);
+		edma_trigger_channel(echan);
+	}
+	spin_unlock(&echan->vchan.lock);
+}
+
+static inline bool edma_error_pending(struct edma_cc *ecc)
+{
+	if (edma_read_array(ecc, EDMA_EMR, 0) ||
+	    edma_read_array(ecc, EDMA_EMR, 1) ||
+	    edma_read(ecc, EDMA_QEMR) || edma_read(ecc, EDMA_CCERR))
+		return true;
+
+	return false;
+}
+
+/* eDMA error interrupt handler */
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+	struct edma_cc *ecc = data;
+	int i, j;
+	int ctlr;
+	unsigned int cnt = 0;
+	unsigned int val;
+
+	ctlr = ecc->id;
+	if (ctlr < 0)
+		return IRQ_NONE;
+
+	dev_vdbg(ecc->dev, "dma_ccerr_handler\n");
+
+	if (!edma_error_pending(ecc))
+		return IRQ_NONE;
+
+	while (1) {
+		/* Event missed register(s) */
+		for (j = 0; j < 2; j++) {
+			unsigned long emr;
+
+			val = edma_read_array(ecc, EDMA_EMR, j);
+			if (!val)
+				continue;
+
+			dev_dbg(ecc->dev, "EMR%d 0x%08x\n", j, val);
+			emr = val;
+			for (i = find_next_bit(&emr, 32, 0); i < 32;
+			     i = find_next_bit(&emr, 32, i + 1)) {
+				int k = (j << 5) + i;
+
+				/* Clear the corresponding EMR bits */
+				edma_write_array(ecc, EDMA_EMCR, j, BIT(i));
+				/* Clear any SER */
+				edma_shadow0_write_array(ecc, SH_SECR, j,
+							 BIT(i));
+				edma_error_handler(&ecc->slave_chans[k]);
+			}
 		}
 
-		spin_unlock(&echan->vchan.lock);
+		val = edma_read(ecc, EDMA_QEMR);
+		if (val) {
+			dev_dbg(ecc->dev, "QEMR 0x%02x\n", val);
+			/* Not reported, just clear the interrupt reason. */
+			edma_write(ecc, EDMA_QEMCR, val);
+			edma_shadow0_write(ecc, SH_QSECR, val);
+		}
+
+		val = edma_read(ecc, EDMA_CCERR);
+		if (val) {
+			dev_warn(ecc->dev, "CCERR 0x%08x\n", val);
+			/* Not reported, just clear the interrupt reason. */
+			edma_write(ecc, EDMA_CCERRCLR, val);
+		}
+
+		if (!edma_error_pending(ecc))
+			break;
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+	edma_write(ecc, EDMA_EEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+static void edma_tc_set_pm_state(struct edma_tc *tc, bool enable)
+{
+	struct platform_device *tc_pdev;
+	int ret;
 
-		break;
-	default:
-		break;
+	if (!tc)
+		return;
+
+	tc_pdev = of_find_device_by_node(tc->node);
+	if (!tc_pdev) {
+		pr_err("%s: TPTC device is not found\n", __func__);
+		return;
 	}
+	if (!pm_runtime_enabled(&tc_pdev->dev))
+		pm_runtime_enable(&tc_pdev->dev);
+
+	if (enable)
+		ret = pm_runtime_get_sync(&tc_pdev->dev);
+	else
+		ret = pm_runtime_put_sync(&tc_pdev->dev);
+
+	if (ret < 0)
+		pr_err("%s: pm_runtime_%s_sync() failed for %s\n", __func__,
+		       enable ? "get" : "put", dev_name(&tc_pdev->dev));
 }
 
 /* Alloc channel resources */
 static int edma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
-	struct device *dev = chan->device->dev;
+	struct edma_cc *ecc = echan->ecc;
+	struct device *dev = ecc->dev;
+	enum dma_event_q eventq_no = EVENTQ_DEFAULT;
 	int ret;
-	int a_ch_num;
-	LIST_HEAD(descs);
-
-	a_ch_num = edma_alloc_channel(echan->ch_num, edma_callback,
-					echan, EVENTQ_DEFAULT);
 
-	if (a_ch_num < 0) {
-		ret = -ENODEV;
-		goto err_no_chan;
+	if (echan->tc) {
+		eventq_no = echan->tc->id;
+	} else if (ecc->tc_list) {
+		/* memcpy channel */
+		echan->tc = &ecc->tc_list[ecc->info->default_queue];
+		eventq_no = echan->tc->id;
 	}
 
-	if (a_ch_num != echan->ch_num) {
-		dev_err(dev, "failed to allocate requested channel %u:%u\n",
-			EDMA_CTLR(echan->ch_num),
+	ret = edma_alloc_channel(echan, eventq_no);
+	if (ret)
+		return ret;
+
+	echan->slot[0] = edma_alloc_slot(ecc, echan->ch_num);
+	if (echan->slot[0] < 0) {
+		dev_err(dev, "Entry slot allocation failed for channel %u\n",
 			EDMA_CHAN_SLOT(echan->ch_num));
-		ret = -ENODEV;
-		goto err_wrong_chan;
+		goto err_slot;
 	}
 
+	/* Set up channel -> slot mapping for the entry slot */
+	edma_set_chmap(echan, echan->slot[0]);
 	echan->alloced = true;
-	echan->slot[0] = echan->ch_num;
 
-	dev_dbg(dev, "allocated channel %d for %u:%u\n", echan->ch_num,
-		EDMA_CTLR(echan->ch_num), EDMA_CHAN_SLOT(echan->ch_num));
+	dev_dbg(dev, "Got eDMA channel %d for virt channel %d (%s trigger)\n",
+		EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
+		echan->hw_triggered ? "HW" : "SW");
+
+	edma_tc_set_pm_state(echan->tc, true);
 
 	return 0;
 
-err_wrong_chan:
-	edma_free_channel(a_ch_num);
-err_no_chan:
+err_slot:
+	edma_free_channel(echan);
 	return ret;
 }
 
@@ -840,29 +1630,37 @@ err_no_chan:
 static void edma_free_chan_resources(struct dma_chan *chan)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
-	struct device *dev = chan->device->dev;
+	struct device *dev = echan->ecc->dev;
 	int i;
 
 	/* Terminate transfers */
-	edma_stop(echan->ch_num);
+	edma_stop(echan);
 
 	vchan_free_chan_resources(&echan->vchan);
 
 	/* Free EDMA PaRAM slots */
-	for (i = 1; i < EDMA_MAX_SLOTS; i++) {
+	for (i = 0; i < EDMA_MAX_SLOTS; i++) {
 		if (echan->slot[i] >= 0) {
-			edma_free_slot(echan->slot[i]);
+			edma_free_slot(echan->ecc, echan->slot[i]);
 			echan->slot[i] = -1;
 		}
 	}
 
+	/* Set entry slot to the dummy slot */
+	edma_set_chmap(echan, echan->ecc->dummy_slot);
+
 	/* Free EDMA channel */
 	if (echan->alloced) {
-		edma_free_channel(echan->ch_num);
+		edma_free_channel(echan);
 		echan->alloced = false;
 	}
 
-	dev_dbg(dev, "freeing channel for %u\n", echan->ch_num);
+	edma_tc_set_pm_state(echan->tc, false);
+	echan->tc = NULL;
+	echan->hw_triggered = false;
+
+	dev_dbg(dev, "Free eDMA channel %d for virt channel %d\n",
+		EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id);
 }
 
 /* Send pending descriptor to hardware */
@@ -888,7 +1686,7 @@ static u32 edma_residue(struct edma_desc *edesc)
 	 * We always read the dst/src position from the first RamPar
 	 * pset. That's the one which is active now.
 	 */
-	pos = edma_get_position(edesc->echan->slot[0], dst);
+	pos = edma_get_position(edesc->echan->ecc, edesc->echan->slot[0], dst);
 
 	/*
 	 * Cyclic is simple. Just subtract pset[0].addr from pos.
@@ -949,19 +1747,101 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
 	return ret;
 }
 
-static void __init edma_chan_init(struct edma_cc *ecc,
-				  struct dma_device *dma,
-				  struct edma_chan *echans)
+static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
 {
+	s16 *memcpy_ch = memcpy_channels;
+
+	if (!memcpy_channels)
+		return false;
+	while (*memcpy_ch != -1) {
+		if (*memcpy_ch == ch_num)
+			return true;
+		memcpy_ch++;
+	}
+	return false;
+}
+
+#define EDMA_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
+{
+	struct dma_device *s_ddev = &ecc->dma_slave;
+	struct dma_device *m_ddev = NULL;
+	s16 *memcpy_channels = ecc->info->memcpy_channels;
 	int i, j;
 
-	for (i = 0; i < EDMA_CHANS; i++) {
-		struct edma_chan *echan = &echans[i];
-		echan->ch_num = EDMA_CTLR_CHAN(ecc->ctlr, i);
+	dma_cap_zero(s_ddev->cap_mask);
+	dma_cap_set(DMA_SLAVE, s_ddev->cap_mask);
+	dma_cap_set(DMA_CYCLIC, s_ddev->cap_mask);
+	if (ecc->legacy_mode && !memcpy_channels) {
+		dev_warn(ecc->dev,
+			 "Legacy memcpy is enabled, things might not work\n");
+
+		dma_cap_set(DMA_MEMCPY, s_ddev->cap_mask);
+		s_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		s_ddev->directions = BIT(DMA_MEM_TO_MEM);
+	}
+
+	s_ddev->device_prep_slave_sg = edma_prep_slave_sg;
+	s_ddev->device_prep_dma_cyclic = edma_prep_dma_cyclic;
+	s_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
+	s_ddev->device_free_chan_resources = edma_free_chan_resources;
+	s_ddev->device_issue_pending = edma_issue_pending;
+	s_ddev->device_tx_status = edma_tx_status;
+	s_ddev->device_config = edma_slave_config;
+	s_ddev->device_pause = edma_dma_pause;
+	s_ddev->device_resume = edma_dma_resume;
+	s_ddev->device_terminate_all = edma_terminate_all;
+
+	s_ddev->src_addr_widths = EDMA_DMA_BUSWIDTHS;
+	s_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
+	s_ddev->directions |= (BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV));
+	s_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+
+	s_ddev->dev = ecc->dev;
+	INIT_LIST_HEAD(&s_ddev->channels);
+
+	if (memcpy_channels) {
+		m_ddev = devm_kzalloc(ecc->dev, sizeof(*m_ddev), GFP_KERNEL);
+		ecc->dma_memcpy = m_ddev;
+
+		dma_cap_zero(m_ddev->cap_mask);
+		dma_cap_set(DMA_MEMCPY, m_ddev->cap_mask);
+
+		m_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		m_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
+		m_ddev->device_free_chan_resources = edma_free_chan_resources;
+		m_ddev->device_issue_pending = edma_issue_pending;
+		m_ddev->device_tx_status = edma_tx_status;
+		m_ddev->device_config = edma_slave_config;
+		m_ddev->device_pause = edma_dma_pause;
+		m_ddev->device_resume = edma_dma_resume;
+		m_ddev->device_terminate_all = edma_terminate_all;
+
+		m_ddev->src_addr_widths = EDMA_DMA_BUSWIDTHS;
+		m_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
+		m_ddev->directions = BIT(DMA_MEM_TO_MEM);
+		m_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+
+		m_ddev->dev = ecc->dev;
+		INIT_LIST_HEAD(&m_ddev->channels);
+	} else if (!ecc->legacy_mode) {
+		dev_info(ecc->dev, "memcpy is disabled\n");
+	}
+
+	for (i = 0; i < ecc->num_channels; i++) {
+		struct edma_chan *echan = &ecc->slave_chans[i];
+		echan->ch_num = EDMA_CTLR_CHAN(ecc->id, i);
 		echan->ecc = ecc;
 		echan->vchan.desc_free = edma_desc_free;
 
-		vchan_init(&echan->vchan, dma);
+		if (m_ddev && edma_is_memcpy_channel(i, memcpy_channels))
+			vchan_init(&echan->vchan, m_ddev);
+		else
+			vchan_init(&echan->vchan, s_ddev);
 
 		INIT_LIST_HEAD(&echan->node);
 		for (j = 0; j < EDMA_MAX_SLOTS; j++)
@@ -969,85 +1849,474 @@ static void __init edma_chan_init(struct edma_cc *ecc,
 	}
 }
 
-#define EDMA_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
-				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
-				 BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
-				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
-
-static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma,
-			  struct device *dev)
+static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
+			      struct edma_cc *ecc)
 {
-	dma->device_prep_slave_sg = edma_prep_slave_sg;
-	dma->device_prep_dma_cyclic = edma_prep_dma_cyclic;
-	dma->device_prep_dma_memcpy = edma_prep_dma_memcpy;
-	dma->device_alloc_chan_resources = edma_alloc_chan_resources;
-	dma->device_free_chan_resources = edma_free_chan_resources;
-	dma->device_issue_pending = edma_issue_pending;
-	dma->device_tx_status = edma_tx_status;
-	dma->device_config = edma_slave_config;
-	dma->device_pause = edma_dma_pause;
-	dma->device_resume = edma_dma_resume;
-	dma->device_terminate_all = edma_terminate_all;
+	int i;
+	u32 value, cccfg;
+	s8 (*queue_priority_map)[2];
+
+	/* Decode the eDMA3 configuration from CCCFG register */
+	cccfg = edma_read(ecc, EDMA_CCCFG);
+
+	value = GET_NUM_REGN(cccfg);
+	ecc->num_region = BIT(value);
+
+	value = GET_NUM_DMACH(cccfg);
+	ecc->num_channels = BIT(value + 1);
+
+	value = GET_NUM_QDMACH(cccfg);
+	ecc->num_qchannels = value * 2;
 
-	dma->src_addr_widths = EDMA_DMA_BUSWIDTHS;
-	dma->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
-	dma->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
-	dma->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	value = GET_NUM_PAENTRY(cccfg);
+	ecc->num_slots = BIT(value + 4);
 
-	dma->dev = dev;
+	value = GET_NUM_EVQUE(cccfg);
+	ecc->num_tc = value + 1;
+
+	ecc->chmap_exist = (cccfg & CHMAP_EXIST) ? true : false;
+
+	dev_dbg(dev, "eDMA3 CC HW configuration (cccfg: 0x%08x):\n", cccfg);
+	dev_dbg(dev, "num_region: %u\n", ecc->num_region);
+	dev_dbg(dev, "num_channels: %u\n", ecc->num_channels);
+	dev_dbg(dev, "num_qchannels: %u\n", ecc->num_qchannels);
+	dev_dbg(dev, "num_slots: %u\n", ecc->num_slots);
+	dev_dbg(dev, "num_tc: %u\n", ecc->num_tc);
+	dev_dbg(dev, "chmap_exist: %s\n", ecc->chmap_exist ? "yes" : "no");
+
+	/* Nothing need to be done if queue priority is provided */
+	if (pdata->queue_priority_mapping)
+		return 0;
 
 	/*
-	 * code using dma memcpy must make sure alignment of
-	 * length is at dma->copy_align boundary.
+	 * Configure TC/queue priority as follows:
+	 * Q0 - priority 0
+	 * Q1 - priority 1
+	 * Q2 - priority 2
+	 * ...
+	 * The meaning of priority numbers: 0 highest priority, 7 lowest
+	 * priority. So Q0 is the highest priority queue and the last queue has
+	 * the lowest priority.
 	 */
-	dma->copy_align = DMAENGINE_ALIGN_4_BYTES;
+	queue_priority_map = devm_kcalloc(dev, ecc->num_tc + 1, sizeof(s8),
+					  GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < ecc->num_tc; i++) {
+		queue_priority_map[i][0] = i;
+		queue_priority_map[i][1] = i;
+	}
+	queue_priority_map[i][0] = -1;
+	queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+	/* Default queue has the lowest priority */
+	pdata->default_queue = i - 1;
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static int edma_xbar_event_map(struct device *dev, struct edma_soc_info *pdata,
+			       size_t sz)
+{
+	const char pname[] = "ti,edma-xbar-event-map";
+	struct resource res;
+	void __iomem *xbar;
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
+	u32 shift, offset, mux;
+	int ret, i;
+
+	xbar_chans = devm_kcalloc(dev, nelm + 2, sizeof(s16), GFP_KERNEL);
+	if (!xbar_chans)
+		return -ENOMEM;
+
+	ret = of_address_to_resource(dev->of_node, 1, &res);
+	if (ret)
+		return -ENOMEM;
+
+	xbar = devm_ioremap(dev, res.start, resource_size(&res));
+	if (!xbar)
+		return -ENOMEM;
+
+	ret = of_property_read_u16_array(dev->of_node, pname, (u16 *)xbar_chans,
+					 nelm);
+	if (ret)
+		return -EIO;
+
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = -1;
+	xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
+		shift = (xbar_chans[i][1] & 0x03) << 3;
+		offset = xbar_chans[i][1] & 0xfffffffc;
+		mux = readl(xbar + offset);
+		mux &= ~(0xff << shift);
+		mux |= xbar_chans[i][0] << shift;
+		writel(mux, (xbar + offset));
+	}
+
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
+	return 0;
+}
+
+static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
+						     bool legacy_mode)
+{
+	struct edma_soc_info *info;
+	struct property *prop;
+	size_t sz;
+	int ret;
+
+	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	if (legacy_mode) {
+		prop = of_find_property(dev->of_node, "ti,edma-xbar-event-map",
+					&sz);
+		if (prop) {
+			ret = edma_xbar_event_map(dev, info, sz);
+			if (ret)
+				return ERR_PTR(ret);
+		}
+		return info;
+	}
+
+	/* Get the list of channels allocated to be used for memcpy */
+	prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
+	if (prop) {
+		const char pname[] = "ti,edma-memcpy-channels";
+		size_t nelm = sz / sizeof(s16);
+		s16 *memcpy_ch;
+
+		memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
+					 GFP_KERNEL);
+		if (!memcpy_ch)
+			return ERR_PTR(-ENOMEM);
+
+		ret = of_property_read_u16_array(dev->of_node, pname,
+						 (u16 *)memcpy_ch, nelm);
+		if (ret)
+			return ERR_PTR(ret);
+
+		memcpy_ch[nelm] = -1;
+		info->memcpy_channels = memcpy_ch;
+	}
+
+	prop = of_find_property(dev->of_node, "ti,edma-reserved-slot-ranges",
+				&sz);
+	if (prop) {
+		const char pname[] = "ti,edma-reserved-slot-ranges";
+		s16 (*rsv_slots)[2];
+		size_t nelm = sz / sizeof(*rsv_slots);
+		struct edma_rsv_info *rsv_info;
+
+		if (!nelm)
+			return info;
+
+		rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
+		if (!rsv_info)
+			return ERR_PTR(-ENOMEM);
+
+		rsv_slots = devm_kcalloc(dev, nelm + 1, sizeof(*rsv_slots),
+					 GFP_KERNEL);
+		if (!rsv_slots)
+			return ERR_PTR(-ENOMEM);
+
+		ret = of_property_read_u16_array(dev->of_node, pname,
+						 (u16 *)rsv_slots, nelm * 2);
+		if (ret)
+			return ERR_PTR(ret);
+
+		rsv_slots[nelm][0] = -1;
+		rsv_slots[nelm][1] = -1;
+		info->rsv = rsv_info;
+		info->rsv->rsv_slots = (const s16 (*)[2])rsv_slots;
+	}
+
+	return info;
+}
+
+static struct dma_chan *of_edma_xlate(struct of_phandle_args *dma_spec,
+				      struct of_dma *ofdma)
+{
+	struct edma_cc *ecc = ofdma->of_dma_data;
+	struct dma_chan *chan = NULL;
+	struct edma_chan *echan;
+	int i;
+
+	if (!ecc || dma_spec->args_count < 1)
+		return NULL;
+
+	for (i = 0; i < ecc->num_channels; i++) {
+		echan = &ecc->slave_chans[i];
+		if (echan->ch_num == dma_spec->args[0]) {
+			chan = &echan->vchan.chan;
+			break;
+		}
+	}
 
-	INIT_LIST_HEAD(&dma->channels);
+	if (!chan)
+		return NULL;
+
+	if (echan->ecc->legacy_mode && dma_spec->args_count == 1)
+		goto out;
+
+	if (!echan->ecc->legacy_mode && dma_spec->args_count == 2 &&
+	    dma_spec->args[1] < echan->ecc->num_tc) {
+		echan->tc = &echan->ecc->tc_list[dma_spec->args[1]];
+		goto out;
+	}
+
+	return NULL;
+out:
+	/* The channel is going to be used as HW synchronized */
+	echan->hw_triggered = true;
+	return dma_get_slave_channel(chan);
+}
+#else
+static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
+						     bool legacy_mode)
+{
+	return ERR_PTR(-EINVAL);
 }
 
+static struct dma_chan *of_edma_xlate(struct of_phandle_args *dma_spec,
+				      struct of_dma *ofdma)
+{
+	return NULL;
+}
+#endif
+
 static int edma_probe(struct platform_device *pdev)
 {
-	struct edma_cc *ecc;
+	struct edma_soc_info	*info = pdev->dev.platform_data;
+	s8			(*queue_priority_mapping)[2];
+	int			i, off, ln;
+	const s16		(*rsv_slots)[2];
+	const s16		(*xbar_chans)[2];
+	int			irq;
+	char			*irq_name;
+	struct resource		*mem;
+	struct device_node	*node = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	struct edma_cc		*ecc;
+	bool			legacy_mode = true;
 	int ret;
 
-	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (node) {
+		const struct of_device_id *match;
+
+		match = of_match_node(edma_of_ids, node);
+		if (match && (u32)match->data == EDMA_BINDING_TPCC)
+			legacy_mode = false;
+
+		info = edma_setup_info_from_dt(dev, legacy_mode);
+		if (IS_ERR(info)) {
+			dev_err(dev, "failed to get DT data\n");
+			return PTR_ERR(info);
+		}
+	}
+
+	if (!info)
+		return -ENODEV;
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		return ret;
+	}
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
 
-	ecc = devm_kzalloc(&pdev->dev, sizeof(*ecc), GFP_KERNEL);
+	ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
 	if (!ecc) {
-		dev_err(&pdev->dev, "Can't allocate controller\n");
+		dev_err(dev, "Can't allocate controller\n");
+		return -ENOMEM;
+	}
+
+	ecc->dev = dev;
+	ecc->id = pdev->id;
+	ecc->legacy_mode = legacy_mode;
+	/* When booting with DT the pdev->id is -1 */
+	if (ecc->id < 0)
+		ecc->id = 0;
+
+	mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma3_cc");
+	if (!mem) {
+		dev_dbg(dev, "mem resource not found, using index 0\n");
+		mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!mem) {
+			dev_err(dev, "no mem resource?\n");
+			return -ENODEV;
+		}
+	}
+	ecc->base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(ecc->base))
+		return PTR_ERR(ecc->base);
+
+	platform_set_drvdata(pdev, ecc);
+
+	/* Get eDMA3 configuration from IP */
+	ret = edma_setup_from_hw(dev, info, ecc);
+	if (ret)
+		return ret;
+
+	/* Allocate memory based on the information we got from the IP */
+	ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
+					sizeof(*ecc->slave_chans), GFP_KERNEL);
+	if (!ecc->slave_chans)
+		return -ENOMEM;
+
+	ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
+				       sizeof(unsigned long), GFP_KERNEL);
+	if (!ecc->slot_inuse)
 		return -ENOMEM;
+
+	ecc->default_queue = info->default_queue;
+
+	for (i = 0; i < ecc->num_slots; i++)
+		edma_write_slot(ecc, i, &dummy_paramset);
+
+	if (info->rsv) {
+		/* Set the reserved slots in inuse list */
+		rsv_slots = info->rsv->rsv_slots;
+		if (rsv_slots) {
+			for (i = 0; rsv_slots[i][0] != -1; i++) {
+				off = rsv_slots[i][0];
+				ln = rsv_slots[i][1];
+				set_bits(off, ln, ecc->slot_inuse);
+			}
+		}
+	}
+
+	/* Clear the xbar mapped channels in unused list */
+	xbar_chans = info->xbar_chans;
+	if (xbar_chans) {
+		for (i = 0; xbar_chans[i][1] != -1; i++) {
+			off = xbar_chans[i][1];
+		}
+	}
+
+	irq = platform_get_irq_byname(pdev, "edma3_ccint");
+	if (irq < 0 && node)
+		irq = irq_of_parse_and_map(node, 0);
+
+	if (irq >= 0) {
+		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
+					  dev_name(dev));
+		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
+				       ecc);
+		if (ret) {
+			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
+			return ret;
+		}
+	}
+
+	irq = platform_get_irq_byname(pdev, "edma3_ccerrint");
+	if (irq < 0 && node)
+		irq = irq_of_parse_and_map(node, 2);
+
+	if (irq >= 0) {
+		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
+					  dev_name(dev));
+		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
+				       ecc);
+		if (ret) {
+			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
+			return ret;
+		}
 	}
 
-	ecc->ctlr = pdev->id;
-	ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY);
+	ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
-		dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
+		dev_err(dev, "Can't allocate PaRAM dummy slot\n");
 		return ecc->dummy_slot;
 	}
 
-	dma_cap_zero(ecc->dma_slave.cap_mask);
-	dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask);
-	dma_cap_set(DMA_CYCLIC, ecc->dma_slave.cap_mask);
-	dma_cap_set(DMA_MEMCPY, ecc->dma_slave.cap_mask);
+	queue_priority_mapping = info->queue_priority_mapping;
+
+	if (!ecc->legacy_mode) {
+		int lowest_priority = 0;
+		struct of_phandle_args tc_args;
+
+		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
+					    sizeof(*ecc->tc_list), GFP_KERNEL);
+		if (!ecc->tc_list)
+			return -ENOMEM;
+
+		for (i = 0;; i++) {
+			ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
+							       1, i, &tc_args);
+			if (ret || i == ecc->num_tc)
+				break;
+
+			ecc->tc_list[i].node = tc_args.np;
+			ecc->tc_list[i].id = i;
+			queue_priority_mapping[i][1] = tc_args.args[0];
+			if (queue_priority_mapping[i][1] > lowest_priority) {
+				lowest_priority = queue_priority_mapping[i][1];
+				info->default_queue = i;
+			}
+		}
+	}
+
+	/* Event queue priority mapping */
+	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+		edma_assign_priority_to_queue(ecc, queue_priority_mapping[i][0],
+					      queue_priority_mapping[i][1]);
 
-	edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev);
+	for (i = 0; i < ecc->num_region; i++) {
+		edma_write_array2(ecc, EDMA_DRAE, i, 0, 0x0);
+		edma_write_array2(ecc, EDMA_DRAE, i, 1, 0x0);
+		edma_write_array(ecc, EDMA_QRAE, i, 0x0);
+	}
+	ecc->info = info;
 
-	edma_chan_init(ecc, &ecc->dma_slave, ecc->slave_chans);
+	/* Init the dma device and channels */
+	edma_dma_init(ecc, legacy_mode);
+
+	for (i = 0; i < ecc->num_channels; i++) {
+		/* Assign all channels to the default queue */
+		edma_assign_channel_eventq(&ecc->slave_chans[i],
+					   info->default_queue);
+		/* Set entry slot to the dummy slot */
+		edma_set_chmap(&ecc->slave_chans[i], ecc->dummy_slot);
+	}
 
 	ret = dma_async_device_register(&ecc->dma_slave);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "slave ddev registration failed (%d)\n", ret);
 		goto err_reg1;
+	}
 
-	platform_set_drvdata(pdev, ecc);
+	if (ecc->dma_memcpy) {
+		ret = dma_async_device_register(ecc->dma_memcpy);
+		if (ret) {
+			dev_err(dev, "memcpy ddev registration failed (%d)\n",
+				ret);
+			dma_async_device_unregister(&ecc->dma_slave);
+			goto err_reg1;
+		}
+	}
+
+	if (node)
+		of_dma_controller_register(node, of_edma_xlate, ecc);
 
-	dev_info(&pdev->dev, "TI EDMA DMA engine driver\n");
+	dev_info(dev, "TI EDMA DMA engine driver\n");
 
 	return 0;
 
 err_reg1:
-	edma_free_slot(ecc->dummy_slot);
+	edma_free_slot(ecc, ecc->dummy_slot);
 	return ret;
 }
 
@@ -1056,28 +2325,94 @@ static int edma_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct edma_cc *ecc = dev_get_drvdata(dev);
 
+	if (dev->of_node)
+		of_dma_controller_free(dev->of_node);
 	dma_async_device_unregister(&ecc->dma_slave);
-	edma_free_slot(ecc->dummy_slot);
+	if (ecc->dma_memcpy)
+		dma_async_device_unregister(ecc->dma_memcpy);
+	edma_free_slot(ecc, ecc->dummy_slot);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int edma_pm_suspend(struct device *dev)
+{
+	struct edma_cc *ecc = dev_get_drvdata(dev);
+	struct edma_chan *echan = ecc->slave_chans;
+	int i;
+
+	for (i = 0; i < ecc->num_channels; i++) {
+		if (echan[i].alloced) {
+			edma_setup_interrupt(&echan[i], false);
+			edma_tc_set_pm_state(echan[i].tc, false);
+		}
+	}
+
+	return 0;
+}
+
+static int edma_pm_resume(struct device *dev)
+{
+	struct edma_cc *ecc = dev_get_drvdata(dev);
+	struct edma_chan *echan = ecc->slave_chans;
+	int i;
+	s8 (*queue_priority_mapping)[2];
+
+	queue_priority_mapping = ecc->info->queue_priority_mapping;
+
+	/* Event queue priority mapping */
+	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+		edma_assign_priority_to_queue(ecc, queue_priority_mapping[i][0],
+					      queue_priority_mapping[i][1]);
+
+	for (i = 0; i < ecc->num_channels; i++) {
+		if (echan[i].alloced) {
+			/* ensure access through shadow region 0 */
+			edma_or_array2(ecc, EDMA_DRAE, 0, i >> 5,
+				       BIT(i & 0x1f));
+
+			edma_setup_interrupt(&echan[i], true);
+
+			/* Set up channel -> slot mapping for the entry slot */
+			edma_set_chmap(&echan[i], echan[i].slot[0]);
+
+			edma_tc_set_pm_state(echan[i].tc, true);
+		}
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops edma_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(edma_pm_suspend, edma_pm_resume)
+};
+
 static struct platform_driver edma_driver = {
 	.probe		= edma_probe,
 	.remove		= edma_remove,
 	.driver = {
-		.name = "edma-dma-engine",
+		.name	= "edma",
+		.pm	= &edma_pm_ops,
+		.of_match_table = edma_of_ids,
 	},
 };
 
 bool edma_filter_fn(struct dma_chan *chan, void *param)
 {
+	bool match = false;
+
 	if (chan->device->dev->driver == &edma_driver.driver) {
 		struct edma_chan *echan = to_edma_chan(chan);
 		unsigned ch_req = *(unsigned *)param;
-		return ch_req == echan->ch_num;
+		if (ch_req == echan->ch_num) {
+			/* The channel is going to be used as HW synchronized */
+			echan->hw_triggered = true;
+			match = true;
+		}
 	}
-	return false;
+	return match;
 }
 EXPORT_SYMBOL(edma_filter_fn);
 
diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 5cce8c9d0026..a415edbe61b1 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -17,13 +17,184 @@
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
 
-#define TI_XBAR_OUTPUTS	127
-#define TI_XBAR_INPUTS	256
+#define TI_XBAR_DRA7		0
+#define TI_XBAR_AM335X		1
+
+static const struct of_device_id ti_dma_xbar_match[] = {
+	{
+		.compatible = "ti,dra7-dma-crossbar",
+		.data = (void *)TI_XBAR_DRA7,
+	},
+	{
+		.compatible = "ti,am335x-edma-crossbar",
+		.data = (void *)TI_XBAR_AM335X,
+	},
+	{},
+};
+
+/* Crossbar on AM335x/AM437x family */
+#define TI_AM335X_XBAR_LINES	64
+
+struct ti_am335x_xbar_data {
+	void __iomem *iomem;
+
+	struct dma_router dmarouter;
+
+	u32 xbar_events; /* maximum number of events to select in xbar */
+	u32 dma_requests; /* number of DMA requests on eDMA */
+};
+
+struct ti_am335x_xbar_map {
+	u16 dma_line;
+	u16 mux_val;
+};
+
+static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val)
+{
+	writeb_relaxed(val & 0x1f, iomem + event);
+}
+
+static void ti_am335x_xbar_free(struct device *dev, void *route_data)
+{
+	struct ti_am335x_xbar_data *xbar = dev_get_drvdata(dev);
+	struct ti_am335x_xbar_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping XBAR event %u on channel %u\n",
+		map->mux_val, map->dma_line);
+
+	ti_am335x_xbar_write(xbar->iomem, map->dma_line, 0);
+	kfree(map);
+}
+
+static void *ti_am335x_xbar_route_allocate(struct of_phandle_args *dma_spec,
+					   struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct ti_am335x_xbar_data *xbar = platform_get_drvdata(pdev);
+	struct ti_am335x_xbar_map *map;
+
+	if (dma_spec->args_count != 3)
+		return ERR_PTR(-EINVAL);
+
+	if (dma_spec->args[2] >= xbar->xbar_events) {
+		dev_err(&pdev->dev, "Invalid XBAR event number: %d\n",
+			dma_spec->args[2]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dma_spec->args[0] >= xbar->dma_requests) {
+		dev_err(&pdev->dev, "Invalid DMA request line number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* The of_node_put() will be done in the core for the node */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map) {
+		of_node_put(dma_spec->np);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	map->dma_line = (u16)dma_spec->args[0];
+	map->mux_val = (u16)dma_spec->args[2];
+
+	dma_spec->args[2] = 0;
+	dma_spec->args_count = 2;
+
+	dev_dbg(&pdev->dev, "Mapping XBAR event%u to DMA%u\n",
+		map->mux_val, map->dma_line);
+
+	ti_am335x_xbar_write(xbar->iomem, map->dma_line, map->mux_val);
+
+	return map;
+}
+
+static const struct of_device_id ti_am335x_master_match[] = {
+	{ .compatible = "ti,edma3-tpcc", },
+	{},
+};
+
+static int ti_am335x_xbar_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dma_node;
+	struct ti_am335x_xbar_data *xbar;
+	struct resource *res;
+	void __iomem *iomem;
+	int i, ret;
+
+	if (!node)
+		return -ENODEV;
+
+	xbar = devm_kzalloc(&pdev->dev, sizeof(*xbar), GFP_KERNEL);
+	if (!xbar)
+		return -ENOMEM;
+
+	dma_node = of_parse_phandle(node, "dma-masters", 0);
+	if (!dma_node) {
+		dev_err(&pdev->dev, "Can't get DMA master node\n");
+		return -ENODEV;
+	}
+
+	match = of_match_node(ti_am335x_master_match, dma_node);
+	if (!match) {
+		dev_err(&pdev->dev, "DMA master is not supported\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(dma_node, "dma-requests",
+				 &xbar->dma_requests)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR output information, using %u.\n",
+			 TI_AM335X_XBAR_LINES);
+		xbar->dma_requests = TI_AM335X_XBAR_LINES;
+	}
+	of_node_put(dma_node);
+
+	if (of_property_read_u32(node, "dma-requests", &xbar->xbar_events)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR input information, using %u.\n",
+			 TI_AM335X_XBAR_LINES);
+		xbar->xbar_events = TI_AM335X_XBAR_LINES;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(iomem))
+		return PTR_ERR(iomem);
+
+	xbar->iomem = iomem;
+
+	xbar->dmarouter.dev = &pdev->dev;
+	xbar->dmarouter.route_free = ti_am335x_xbar_free;
+
+	platform_set_drvdata(pdev, xbar);
+
+	/* Reset the crossbar */
+	for (i = 0; i < xbar->dma_requests; i++)
+		ti_am335x_xbar_write(xbar->iomem, i, 0);
+
+	ret = of_dma_router_register(node, ti_am335x_xbar_route_allocate,
+				     &xbar->dmarouter);
+
+	return ret;
+}
+
+/* Crossbar on DRA7xx family */
+#define TI_DRA7_XBAR_OUTPUTS	127
+#define TI_DRA7_XBAR_INPUTS	256
 
 #define TI_XBAR_EDMA_OFFSET	0
 #define TI_XBAR_SDMA_OFFSET	1
 
-struct ti_dma_xbar_data {
+struct ti_dra7_xbar_data {
 	void __iomem *iomem;
 
 	struct dma_router dmarouter;
@@ -35,35 +206,35 @@ struct ti_dma_xbar_data {
 	u32 dma_offset;
 };
 
-struct ti_dma_xbar_map {
+struct ti_dra7_xbar_map {
 	u16 xbar_in;
 	int xbar_out;
 };
 
-static inline void ti_dma_xbar_write(void __iomem *iomem, int xbar, u16 val)
+static inline void ti_dra7_xbar_write(void __iomem *iomem, int xbar, u16 val)
 {
 	writew_relaxed(val, iomem + (xbar * 2));
 }
 
-static void ti_dma_xbar_free(struct device *dev, void *route_data)
+static void ti_dra7_xbar_free(struct device *dev, void *route_data)
 {
-	struct ti_dma_xbar_data *xbar = dev_get_drvdata(dev);
-	struct ti_dma_xbar_map *map = route_data;
+	struct ti_dra7_xbar_data *xbar = dev_get_drvdata(dev);
+	struct ti_dra7_xbar_map *map = route_data;
 
 	dev_dbg(dev, "Unmapping XBAR%u (was routed to %d)\n",
 		map->xbar_in, map->xbar_out);
 
-	ti_dma_xbar_write(xbar->iomem, map->xbar_out, xbar->safe_val);
+	ti_dra7_xbar_write(xbar->iomem, map->xbar_out, xbar->safe_val);
 	idr_remove(&xbar->map_idr, map->xbar_out);
 	kfree(map);
 }
 
-static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
-					struct of_dma *ofdma)
+static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
 {
 	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
-	struct ti_dma_xbar_data *xbar = platform_get_drvdata(pdev);
-	struct ti_dma_xbar_map *map;
+	struct ti_dra7_xbar_data *xbar = platform_get_drvdata(pdev);
+	struct ti_dra7_xbar_map *map;
 
 	if (dma_spec->args[0] >= xbar->xbar_requests) {
 		dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
@@ -93,12 +264,12 @@ static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
 	dev_dbg(&pdev->dev, "Mapping XBAR%u to DMA%d\n",
 		map->xbar_in, map->xbar_out);
 
-	ti_dma_xbar_write(xbar->iomem, map->xbar_out, map->xbar_in);
+	ti_dra7_xbar_write(xbar->iomem, map->xbar_out, map->xbar_in);
 
 	return map;
 }
 
-static const struct of_device_id ti_dma_master_match[] = {
+static const struct of_device_id ti_dra7_master_match[] = {
 	{
 		.compatible = "ti,omap4430-sdma",
 		.data = (void *)TI_XBAR_SDMA_OFFSET,
@@ -110,12 +281,12 @@ static const struct of_device_id ti_dma_master_match[] = {
 	{},
 };
 
-static int ti_dma_xbar_probe(struct platform_device *pdev)
+static int ti_dra7_xbar_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	const struct of_device_id *match;
 	struct device_node *dma_node;
-	struct ti_dma_xbar_data *xbar;
+	struct ti_dra7_xbar_data *xbar;
 	struct resource *res;
 	u32 safe_val;
 	void __iomem *iomem;
@@ -136,7 +307,7 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	match = of_match_node(ti_dma_master_match, dma_node);
+	match = of_match_node(ti_dra7_master_match, dma_node);
 	if (!match) {
 		dev_err(&pdev->dev, "DMA master is not supported\n");
 		return -EINVAL;
@@ -146,16 +317,16 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 				 &xbar->dma_requests)) {
 		dev_info(&pdev->dev,
 			 "Missing XBAR output information, using %u.\n",
-			 TI_XBAR_OUTPUTS);
-		xbar->dma_requests = TI_XBAR_OUTPUTS;
+			 TI_DRA7_XBAR_OUTPUTS);
+		xbar->dma_requests = TI_DRA7_XBAR_OUTPUTS;
 	}
 	of_node_put(dma_node);
 
 	if (of_property_read_u32(node, "dma-requests", &xbar->xbar_requests)) {
 		dev_info(&pdev->dev,
 			 "Missing XBAR input information, using %u.\n",
-			 TI_XBAR_INPUTS);
-		xbar->xbar_requests = TI_XBAR_INPUTS;
+			 TI_DRA7_XBAR_INPUTS);
+		xbar->xbar_requests = TI_DRA7_XBAR_INPUTS;
 	}
 
 	if (!of_property_read_u32(node, "ti,dma-safe-map", &safe_val))
@@ -169,30 +340,50 @@ static int ti_dma_xbar_probe(struct platform_device *pdev)
 	xbar->iomem = iomem;
 
 	xbar->dmarouter.dev = &pdev->dev;
-	xbar->dmarouter.route_free = ti_dma_xbar_free;
+	xbar->dmarouter.route_free = ti_dra7_xbar_free;
 	xbar->dma_offset = (u32)match->data;
 
 	platform_set_drvdata(pdev, xbar);
 
 	/* Reset the crossbar */
 	for (i = 0; i < xbar->dma_requests; i++)
-		ti_dma_xbar_write(xbar->iomem, i, xbar->safe_val);
+		ti_dra7_xbar_write(xbar->iomem, i, xbar->safe_val);
 
-	ret = of_dma_router_register(node, ti_dma_xbar_route_allocate,
+	ret = of_dma_router_register(node, ti_dra7_xbar_route_allocate,
 				     &xbar->dmarouter);
 	if (ret) {
 		/* Restore the defaults for the crossbar */
 		for (i = 0; i < xbar->dma_requests; i++)
-			ti_dma_xbar_write(xbar->iomem, i, i);
+			ti_dra7_xbar_write(xbar->iomem, i, i);
 	}
 
 	return ret;
 }
 
-static const struct of_device_id ti_dma_xbar_match[] = {
-	{ .compatible = "ti,dra7-dma-crossbar" },
-	{},
-};
+static int ti_dma_xbar_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_node(ti_dma_xbar_match, pdev->dev.of_node);
+	if (unlikely(!match))
+		return -EINVAL;
+
+	switch ((u32)match->data) {
+	case TI_XBAR_DRA7:
+		ret = ti_dra7_xbar_probe(pdev);
+		break;
+	case TI_XBAR_AM335X:
+		ret = ti_am335x_xbar_probe(pdev);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unsupported crossbar\n");
+		ret = -ENODEV;
+		break;
+	}
+
+	return ret;
+}
 
 static struct platform_driver ti_dma_xbar_driver = {
 	.driver = {
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index bdb2710e2aab..e2878baeb90e 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -41,51 +41,6 @@
 #ifndef EDMA_H_
 #define EDMA_H_
 
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
-	u32 opt;
-	u32 src;
-	u32 a_b_cnt;
-	u32 dst;
-	u32 src_dst_bidx;
-	u32 link_bcntrld;
-	u32 src_dst_cidx;
-	u32 ccnt;
-} __packed;
-
-/* fields in edmacc_param.opt */
-#define SAM		BIT(0)
-#define DAM		BIT(1)
-#define SYNCDIM		BIT(2)
-#define STATIC		BIT(3)
-#define EDMA_FWID	(0x07 << 8)
-#define TCCMODE		BIT(11)
-#define EDMA_TCC(t)	((t) << 12)
-#define TCINTEN		BIT(20)
-#define ITCINTEN	BIT(21)
-#define TCCHEN		BIT(22)
-#define ITCCHEN		BIT(23)
-
-/*ch_status paramater of callback function possible values*/
-#define EDMA_DMA_COMPLETE 1
-#define EDMA_DMA_CC_ERROR 2
-#define EDMA_DMA_TC1_ERROR 3
-#define EDMA_DMA_TC2_ERROR 4
-
-enum address_mode {
-	INCR = 0,
-	FIFO = 1
-};
-
-enum fifo_width {
-	W8BIT = 0,
-	W16BIT = 1,
-	W32BIT = 2,
-	W64BIT = 3,
-	W128BIT = 4,
-	W256BIT = 5
-};
-
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
@@ -94,64 +49,10 @@ enum dma_event_q {
 	EVENTQ_DEFAULT = -1
 };
 
-enum sync_dimension {
-	ASYNC = 0,
-	ABSYNC = 1
-};
-
 #define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
 #define EDMA_CTLR(i)			((i) >> 16)
 #define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
 
-#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY		 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC               2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width);
-dma_addr_t edma_get_position(unsigned slot, bool dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
-
 struct edma_rsv_info {
 
 	const s16	(*rsv_chans)[2];
@@ -170,10 +71,11 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
+	/* List of channels allocated for memcpy, terminated with -1 */
+	s16			*memcpy_channels;
+
 	s8	(*queue_priority_mapping)[2];
 	const s16	(*xbar_chans)[2];
 };
 
-int edma_trigger_channel(unsigned);
-
 #endif