diff options
author | Russell King <rmk+kernel@armlinux.org.uk> | 2020-05-13 10:33:12 +0100 |
---|---|---|
committer | Wolfram Sang <wsa@kernel.org> | 2020-05-20 17:57:23 +0200 |
commit | 7c9ec2c5251851f5a3888d1a7fbb2eaf700a538a (patch) | |
tree | affefb8f48302c71fb83d9300960be6dddfaab75 | |
parent | 4f118a7e4686062bd4df4a37e24c22cd71495b5f (diff) |
i2c: pxa: implement generic i2c bus recovery
Implement generic GPIO-based I2C bus recovery for the PXA I2C driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 176 |
1 files changed, 159 insertions, 17 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 0e194d6cd1b5..a7885b8b5031 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -28,6 +29,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/slab.h> @@ -260,6 +262,11 @@ struct pxa_i2c { bool highmode_enter; u32 fm_mask; u32 hs_mask; + + struct i2c_bus_recovery_info recovery; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_default; + struct pinctrl_state *pinctrl_recovery; }; #define _IBMR(i2c) ((i2c)->reg_ibmr) @@ -559,13 +566,8 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) #define i2c_pxa_set_slave(i2c, err) do { } while (0) #endif -static void i2c_pxa_reset(struct pxa_i2c *i2c) +static void i2c_pxa_do_reset(struct pxa_i2c *i2c) { - pr_debug("Resetting I2C Controller Unit\n"); - - /* abort any transfer currently under way */ - i2c_pxa_abort(i2c); - /* reset according to 9.8 */ writel(ICR_UR, _ICR(i2c)); writel(I2C_ISR_INIT, _ISR(i2c)); @@ -584,12 +586,25 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) #endif i2c_pxa_set_slave(i2c, 0); +} +static void i2c_pxa_enable(struct pxa_i2c *i2c) +{ /* enable unit */ writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); udelay(100); } +static void i2c_pxa_reset(struct pxa_i2c *i2c) +{ + pr_debug("Resetting I2C Controller Unit\n"); + + /* abort any transfer currently under way */ + i2c_pxa_abort(i2c); + i2c_pxa_do_reset(i2c); + i2c_pxa_enable(i2c); +} + #ifdef CONFIG_I2C_PXA_SLAVE /* @@ -1043,6 +1058,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) ret = i2c_pxa_wait_bus_not_busy(i2c); if (ret) { dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); + i2c_recover_bus(&i2c->adap); goto out; } @@ -1088,6 +1104,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) if (!timeout && i2c->msg_num) { i2c_pxa_scream_blue_murder(i2c, "timeout with active message"); + i2c_recover_bus(&i2c->adap); ret = I2C_RETRY; } @@ -1277,6 +1294,129 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev, return 0; } +static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap) +{ + struct pxa_i2c *i2c = adap->algo_data; + u32 ibmr = readl(_IBMR(i2c)); + + /* + * Program the GPIOs to reflect the current I2C bus state while + * we transition to recovery; this avoids glitching the bus. + */ + gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS); + gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS); + + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery)); +} + +static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap) +{ + struct pxa_i2c *i2c = adap->algo_data; + u32 isr; + + /* + * The bus should now be free. Clear up the I2C controller before + * handing control of the bus back to avoid the bus changing state. + */ + isr = readl(_ISR(i2c)); + if (isr & (ISR_UB | ISR_IBB)) { + dev_dbg(&i2c->adap.dev, + "recovery: resetting controller, ISR=0x%08x\n", isr); + i2c_pxa_do_reset(i2c); + } + + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default)); + + dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n", + readl(_IBMR(i2c)), readl(_ISR(i2c))); + + i2c_pxa_enable(i2c); +} + +static int i2c_pxa_init_recovery(struct pxa_i2c *i2c) +{ + struct i2c_bus_recovery_info *bri = &i2c->recovery; + struct device *dev = i2c->adap.dev.parent; + + /* + * When slave mode is enabled, we are not the only master on the bus. + * Bus recovery can only be performed when we are the master, which + * we can't be certain of. Therefore, when slave mode is enabled, do + * not configure bus recovery. + */ + if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) + return 0; + + i2c->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(i2c->pinctrl)) + return PTR_ERR(i2c->pinctrl); + + if (!i2c->pinctrl) + return 0; + + i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl, + PINCTRL_STATE_DEFAULT); + i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery"); + + if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) { + dev_info(dev, "missing pinmux recovery information: %ld %ld\n", + PTR_ERR(i2c->pinctrl_default), + PTR_ERR(i2c->pinctrl_recovery)); + return 0; + } + + /* + * Claiming GPIOs can influence the pinmux state, and may glitch the + * I2C bus. Do this carefully. + */ + bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); + if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + if (IS_ERR(bri->scl_gpiod)) { + dev_info(dev, "missing scl gpio recovery information: %pe\n", + bri->scl_gpiod); + return 0; + } + + /* + * We have SCL. Pull SCL low and wait a bit so that SDA glitches + * have no effect. + */ + gpiod_direction_output(bri->scl_gpiod, 0); + udelay(10); + bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN); + + /* Wait a bit in case of a SDA glitch, and then release SCL. */ + udelay(10); + gpiod_direction_output(bri->scl_gpiod, 1); + + if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + + if (IS_ERR(bri->sda_gpiod)) { + dev_info(dev, "missing sda gpio recovery information: %pe\n", + bri->sda_gpiod); + return 0; + } + + bri->prepare_recovery = i2c_pxa_prepare_recovery; + bri->unprepare_recovery = i2c_pxa_unprepare_recovery; + bri->recover_bus = i2c_generic_scl_recovery; + + i2c->adap.bus_recovery_info = bri; + + /* + * Claiming GPIOs can change the pinmux state, which confuses the + * pinctrl since pinctrl's idea of the current setting is unaffected + * by the pinmux change caused by claiming the GPIO. Work around that + * by switching pinctrl to the GPIO state here. We do it this way to + * avoid glitching the I2C bus. + */ + pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery); + + return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default); +} + static int i2c_pxa_probe(struct platform_device *dev) { struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); @@ -1289,6 +1429,16 @@ static int i2c_pxa_probe(struct platform_device *dev) if (!i2c) return -ENOMEM; + /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ + i2c->adap.nr = dev->id; + i2c->adap.owner = THIS_MODULE; + i2c->adap.retries = 5; + i2c->adap.algo_data = i2c; + i2c->adap.dev.parent = &dev->dev; +#ifdef CONFIG_OF + i2c->adap.dev.of_node = dev->dev.of_node; +#endif + res = platform_get_resource(dev, IORESOURCE_MEM, 0); i2c->reg_base = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(i2c->reg_base)) @@ -1298,8 +1448,9 @@ static int i2c_pxa_probe(struct platform_device *dev) if (irq < 0) return irq; - /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ - i2c->adap.nr = dev->id; + ret = i2c_pxa_init_recovery(i2c); + if (ret) + return ret; ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); if (ret > 0) @@ -1307,9 +1458,6 @@ static int i2c_pxa_probe(struct platform_device *dev) if (ret < 0) return ret; - i2c->adap.owner = THIS_MODULE; - i2c->adap.retries = 5; - spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); @@ -1375,12 +1523,6 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c_pxa_reset(i2c); - i2c->adap.algo_data = i2c; - i2c->adap.dev.parent = &dev->dev; -#ifdef CONFIG_OF - i2c->adap.dev.of_node = dev->dev.of_node; -#endif - ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) goto ereqirq; |