Merge tag 'dmaengine_topic_slave_id_removal_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine into v4_20211204_digetx_support_hdmi_audio_on_nvidia_tegra20

dmaengine_topic_slave_id_removal_5.17

Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17

18 files changed, 117 insertions, 63 deletions

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index a23563cd118b..5a53d7fcef01 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -727,12 +727,6 @@ static int mmp_pdma_config_write(struct dma_chan *dchan,
 
 	chan->dir = direction;
 	chan->dev_addr = addr;
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (cfg->slave_id)
-		chan->drcmr = cfg->slave_id;
 
 	return 0;
 }
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 52d04641e361..6078cc81892e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -909,13 +909,6 @@ static void pxad_get_config(struct pxad_chan *chan,
 		*dcmd |= PXA_DCMD_BURST16;
 	else if (maxburst == 32)
 		*dcmd |= PXA_DCMD_BURST32;
-
-	/* FIXME: drivers should be ported over to use the filter
-	 * function. Once that's done, the following two lines can
-	 * be removed.
-	 */
-	if (chan->cfg.slave_id)
-		chan->drcmr = chan->cfg.slave_id;
 }
 
 static struct dma_async_tx_descriptor *
diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
index ee78bed8d60d..facdacf8aede 100644
--- a/drivers/dma/qcom/qcom_adm.c
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma/qcom_adm.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -140,6 +141,8 @@ struct adm_chan {
 
 	struct adm_async_desc *curr_txd;
 	struct dma_slave_config slave;
+	u32 crci;
+	u32 mux;
 	struct list_head node;
 
 	int error;
@@ -379,8 +382,8 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 			return ERR_PTR(-EINVAL);
 		}
 
-		crci = achan->slave.slave_id & 0xf;
-		if (!crci || achan->slave.slave_id > 0x1f) {
+		crci = achan->crci & 0xf;
+		if (!crci || achan->crci > 0x1f) {
 			dev_err(adev->dev, "invalid crci value\n");
 			return ERR_PTR(-EINVAL);
 		}
@@ -403,9 +406,7 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 	if (!async_desc)
 		return ERR_PTR(-ENOMEM);
 
-	if (crci)
-		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
-					ADM_CRCI_CTL_MUX_SEL : 0;
+	async_desc->mux = achan->mux ? ADM_CRCI_CTL_MUX_SEL : 0;
 	async_desc->crci = crci;
 	async_desc->blk_size = blk_size;
 	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
@@ -488,10 +489,13 @@ static int adm_terminate_all(struct dma_chan *chan)
 static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
 {
 	struct adm_chan *achan = to_adm_chan(chan);
+	struct qcom_adm_peripheral_config *config = cfg->peripheral_config;
 	unsigned long flag;
 
 	spin_lock_irqsave(&achan->vc.lock, flag);
 	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+	if (cfg->peripheral_size == sizeof(config))
+		achan->crci = config->crci;
 	spin_unlock_irqrestore(&achan->vc.lock, flag);
 
 	return 0;
@@ -694,6 +698,45 @@ static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
 	achan->vc.desc_free = adm_dma_free_desc;
 }
 
+/**
+ * adm_dma_xlate
+ * @dma_spec:	pointer to DMA specifier as found in the device tree
+ * @ofdma:	pointer to DMA controller data
+ *
+ * This can use either 1-cell or 2-cell formats, the first cell
+ * identifies the slave device, while the optional second cell
+ * contains the crci value.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+static struct dma_chan *adm_dma_xlate(struct of_phandle_args *dma_spec,
+			       struct of_dma *ofdma)
+{
+	struct dma_device *dev = ofdma->of_dma_data;
+	struct dma_chan *chan, *candidate = NULL;
+	struct adm_chan *achan;
+
+	if (!dev || dma_spec->args_count > 2)
+		return NULL;
+
+	list_for_each_entry(chan, &dev->channels, device_node)
+		if (chan->chan_id == dma_spec->args[0]) {
+			candidate = chan;
+			break;
+		}
+
+	if (!candidate)
+		return NULL;
+
+	achan = to_adm_chan(candidate);
+	if (dma_spec->args_count == 2)
+		achan->crci = dma_spec->args[1];
+	else
+		achan->crci = 0;
+
+	return dma_get_slave_channel(candidate);
+}
+
 static int adm_dma_probe(struct platform_device *pdev)
 {
 	struct adm_device *adev;
@@ -838,8 +881,7 @@ static int adm_dma_probe(struct platform_device *pdev)
 		goto err_disable_clks;
 	}
 
-	ret = of_dma_controller_register(pdev->dev.of_node,
-					 of_dma_xlate_by_chan_id,
+	ret = of_dma_controller_register(pdev->dev.of_node, adm_dma_xlate,
 					 &adev->common);
 	if (ret)
 		goto err_unregister_dma;
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 7f72b3f4cd1a..41c6bc650fa3 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -787,14 +787,6 @@ static int shdma_config(struct dma_chan *chan,
 		return -EINVAL;
 
 	/*
-	 * overriding the slave_id through dma_slave_config is deprecated,
-	 * but possibly some out-of-tree drivers still do it.
-	 */
-	if (WARN_ON_ONCE(config->slave_id &&
-			 config->slave_id != schan->real_slave_id))
-		schan->real_slave_id = config->slave_id;
-
-	/*
 	 * We could lock this, but you shouldn't be configuring the
 	 * channel, while using it...
 	 */
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 4357d2395e6b..7f158ef5672d 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -795,9 +795,6 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 		return dst_datawidth;
 	}
 
-	if (slave_cfg->slave_id)
-		schan->dev_id = slave_cfg->slave_id;
-
 	hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
 
 	/*
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index b7260749e8ee..eaafcbe4ca94 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -343,12 +343,6 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
 	}
 
 	memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
-	if (tdc->slave_id == TEGRA_APBDMA_SLAVE_ID_INVALID &&
-	    sconfig->device_fc) {
-		if (sconfig->slave_id > TEGRA_APBDMA_CSR_REQ_SEL_MASK)
-			return -EINVAL;
-		tdc->slave_id = sconfig->slave_id;
-	}
 	tdc->config_init = true;
 
 	return 0;
diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
index ce5c66e6897d..b0f4948b00a5 100644
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/dma/xilinx_dpdma.h>
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
 #include <linux/interrupt.h>
@@ -1273,6 +1274,7 @@ static int xilinx_dpdma_config(struct dma_chan *dchan,
 			       struct dma_slave_config *config)
 {
 	struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
+	struct xilinx_dpdma_peripheral_config *pconfig;
 	unsigned long flags;
 
 	/*
@@ -1282,15 +1284,18 @@ static int xilinx_dpdma_config(struct dma_chan *dchan,
 	 * fixed both on the DPDMA side and on the DP controller side.
 	 */
 
-	spin_lock_irqsave(&chan->lock, flags);
-
 	/*
-	 * Abuse the slave_id to indicate that the channel is part of a video
-	 * group.
+	 * Use the peripheral_config to indicate that the channel is part
+	 * of a video group. This requires matching use of the custom
+	 * structure in each driver.
 	 */
-	if (chan->id <= ZYNQMP_DPDMA_VIDEO2)
-		chan->video_group = config->slave_id != 0;
+	pconfig = config->peripheral_config;
+	if (WARN_ON(pconfig && config->peripheral_size != sizeof(*pconfig)))
+		return -EINVAL;
 
+	spin_lock_irqsave(&chan->lock, flags);
+	if (chan->id <= ZYNQMP_DPDMA_VIDEO2 && pconfig)
+		chan->video_group = pconfig->video_group;
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	return 0;
diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
index ff2b308d8651..11c409cbc88e 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
@@ -24,6 +24,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dma/xilinx_dpdma.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/module.h>
@@ -1058,14 +1059,18 @@ static void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
 	zynqmp_disp_avbuf_set_format(layer->disp, layer, layer->disp_fmt);
 
 	/*
-	 * Set slave_id for each DMA channel to indicate they're part of a
+	 * Set pconfig for each DMA channel to indicate they're part of a
 	 * video group.
 	 */
 	for (i = 0; i < info->num_planes; i++) {
 		struct zynqmp_disp_layer_dma *dma = &layer->dmas[i];
+		struct xilinx_dpdma_peripheral_config pconfig = {
+			.video_group = true,
+		};
 		struct dma_slave_config config = {
 			.direction = DMA_MEM_TO_DEV,
-			.slave_id = 1,
+			.peripheral_config = &pconfig,
+			.peripheral_size = sizeof(pconfig),
 		};
 
 		dmaengine_slave_config(dma->chan, &config);
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 8c2361e66277..463b707d9e99 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1293,14 +1293,12 @@ static int bcm2835_add_host(struct bcm2835_host *host)
 
 		host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		host->dma_cfg_tx.slave_id = 13;		/* DREQ channel */
 		host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
 		host->dma_cfg_tx.src_addr = 0;
 		host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
 
 		host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		host->dma_cfg_rx.slave_id = 13;		/* DREQ channel */
 		host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
 		host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
 		host->dma_cfg_rx.dst_addr = 0;
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 04e6f7b26706..7c6efa3b6255 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -6,6 +6,7 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
+#include <linux/dma/qcom_adm.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/module.h>
@@ -952,6 +953,7 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
 	struct dma_async_tx_descriptor *dma_desc;
 	struct scatterlist *sgl;
 	struct dma_slave_config slave_conf;
+	struct qcom_adm_peripheral_config periph_conf = {};
 	enum dma_transfer_direction dir_eng;
 	int ret;
 
@@ -983,11 +985,19 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
 	if (read) {
 		slave_conf.src_maxburst = 16;
 		slave_conf.src_addr = nandc->base_dma + reg_off;
-		slave_conf.slave_id = nandc->data_crci;
+		if (nandc->data_crci) {
+			periph_conf.crci = nandc->data_crci;
+			slave_conf.peripheral_config = &periph_conf;
+			slave_conf.peripheral_size = sizeof(periph_conf);
+		}
 	} else {
 		slave_conf.dst_maxburst = 16;
 		slave_conf.dst_addr = nandc->base_dma + reg_off;
-		slave_conf.slave_id = nandc->cmd_crci;
+		if (nandc->cmd_crci) {
+			periph_conf.crci = nandc->cmd_crci;
+			slave_conf.peripheral_config = &periph_conf;
+			slave_conf.peripheral_size = sizeof(periph_conf);
+		}
 	}
 
 	ret = dmaengine_slave_config(nandc->chan, &slave_conf);
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index 5eb7b61bbb4d..f86433b29260 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -370,7 +370,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
 	cfg.src_addr_width = dma_width;
 	cfg.dst_addr_width = dma_width;
 	/* tx channel */
-	cfg.slave_id = pic32s->tx_irq;
 	cfg.direction = DMA_MEM_TO_DEV;
 	ret = dmaengine_slave_config(master->dma_tx, &cfg);
 	if (ret) {
@@ -378,7 +377,6 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
 		return ret;
 	}
 	/* rx channel */
-	cfg.slave_id = pic32s->rx_irq;
 	cfg.direction = DMA_DEV_TO_MEM;
 	ret = dmaengine_slave_config(master->dma_rx, &cfg);
 	if (ret)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index fcef7a961430..c6be09f44dc1 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -9,6 +9,7 @@
 
 #include <linux/kernel.h>
 #include <linux/atomic.h>
+#include <linux/dma/qcom_adm.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/module.h>
@@ -290,6 +291,7 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
 {
 	struct device *dev = msm_port->uart.dev;
 	struct dma_slave_config conf;
+	struct qcom_adm_peripheral_config periph_conf = {};
 	struct msm_dma *dma;
 	u32 crci = 0;
 	int ret;
@@ -308,7 +310,11 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
 	conf.device_fc = true;
 	conf.dst_addr = base + UARTDM_TF;
 	conf.dst_maxburst = UARTDM_BURST_SIZE;
-	conf.slave_id = crci;
+	if (crci) {
+		conf.peripheral_config = &periph_conf;
+		conf.peripheral_size = sizeof(periph_conf);
+		periph_conf.crci = crci;
+	}
 
 	ret = dmaengine_slave_config(dma->chan, &conf);
 	if (ret)
@@ -333,6 +339,7 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 {
 	struct device *dev = msm_port->uart.dev;
 	struct dma_slave_config conf;
+	struct qcom_adm_peripheral_config periph_conf = {};
 	struct msm_dma *dma;
 	u32 crci = 0;
 	int ret;
@@ -355,7 +362,11 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 	conf.device_fc = true;
 	conf.src_addr = base + UARTDM_RF;
 	conf.src_maxburst = UARTDM_BURST_SIZE;
-	conf.slave_id = crci;
+	if (crci) {
+		conf.peripheral_config = &periph_conf;
+		conf.peripheral_size = sizeof(periph_conf);
+		periph_conf.crci = crci;
+	}
 
 	ret = dmaengine_slave_config(dma->chan, &conf);
 	if (ret)
diff --git a/include/linux/dma/qcom_adm.h b/include/linux/dma/qcom_adm.h
new file mode 100644
index 000000000000..af20df674f0c
--- /dev/null
+++ b/include/linux/dma/qcom_adm.h
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#ifndef __LINUX_DMA_QCOM_ADM_H
+#define __LINUX_DMA_QCOM_ADM_H
+
+#include <linux/types.h>
+
+struct qcom_adm_peripheral_config {
+	u32 crci;
+	u32 mux;
+};
+
+#endif /* __LINUX_DMA_QCOM_ADM_H */
diff --git a/include/linux/dma/xilinx_dpdma.h b/include/linux/dma/xilinx_dpdma.h
new file mode 100644
index 000000000000..83a1377f03f8
--- /dev/null
+++ b/include/linux/dma/xilinx_dpdma.h
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __LINUX_DMA_XILINX_DPDMA_H
+#define __LINUX_DMA_XILINX_DPDMA_H
+
+#include <linux/types.h>
+
+struct xilinx_dpdma_peripheral_config {
+	bool video_group;
+};
+
+#endif /* __LINUX_DMA_XILINX_DPDMA_H */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9000f3ffce8b..0349b35235e6 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -418,9 +418,6 @@ enum dma_slave_buswidth {
  * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill
  * with 'true' if peripheral should be flow controller. Direction will be
  * selected at Runtime.
- * @slave_id: Slave requester id. Only valid for slave channels. The dma
- * slave peripheral will have unique id as dma requester which need to be
- * pass as slave config.
  * @peripheral_config: peripheral configuration for programming peripheral
  * for dmaengine transfer
  * @peripheral_size: peripheral configuration buffer size
@@ -448,7 +445,6 @@ struct dma_slave_config {
 	u32 src_port_window_size;
 	u32 dst_port_window_size;
 	bool device_fc;
-	unsigned int slave_id;
 	void *peripheral_config;
 	size_t peripheral_size;
 };
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index 96666efddb39..38ea046e653c 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -60,7 +60,6 @@ struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream)
  * @maxburst: Maximum number of words(note: words, as in units of the
  * src_addr_width member, not bytes) that can be send to or received from the
  * DAI in one burst.
- * @slave_id: Slave requester id for the DMA channel.
  * @filter_data: Custom DMA channel filter data, this will usually be used when
  * requesting the DMA channel.
  * @chan_name: Custom channel name to use when requesting DMA channel.
@@ -74,7 +73,6 @@ struct snd_dmaengine_dai_dma_data {
 	dma_addr_t addr;
 	enum dma_slave_buswidth addr_width;
 	u32 maxburst;
-	unsigned int slave_id;
 	void *filter_data;
 	const char *chan_name;
 	unsigned int fifo_size;
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 1fc2fa077574..af6f717e1e7e 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -91,8 +91,8 @@ EXPORT_SYMBOL_GPL(snd_hwparams_to_dma_slave_config);
  * @dma_data: DAI DMA data
  * @slave_config: DMA slave configuration
  *
- * Initializes the {dst,src}_addr, {dst,src}_maxburst, {dst,src}_addr_width and
- * slave_id fields of the DMA slave config from the same fields of the DAI DMA
+ * Initializes the {dst,src}_addr, {dst,src}_maxburst, {dst,src}_addr_width
+ * fields of the DMA slave config from the same fields of the DAI DMA
  * data struct. The src and dst fields will be initialized depending on the
  * direction of the substream. If the substream is a playback stream the dst
  * fields will be initialized, if it is a capture stream the src fields will be
@@ -124,7 +124,6 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
 			slave_config->src_addr_width = dma_data->addr_width;
 	}
 
-	slave_config->slave_id = dma_data->slave_id;
 	slave_config->peripheral_config = dma_data->peripheral_config;
 	slave_config->peripheral_size = dma_data->peripheral_size;
 }
diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index 7751575cd6d6..57a6c576b91f 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -290,7 +290,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
 	spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
 	spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	spdif->playback_dma_data.maxburst = 4;
-	spdif->playback_dma_data.slave_id = dmareq->start;
 
 	pm_runtime_enable(&pdev->dev);