diff options
| author | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2022-06-06 19:41:30 +0300 |
|---|---|---|
| committer | Lee Jones <lee@kernel.org> | 2022-07-14 10:50:25 +0100 |
| commit | 559793198f9280cdd56c438f5258e315ed8a6cbc (patch) | |
| tree | 1caf9cd98ba53f4124ea35b3331b500650b85a44 | |
| parent | 6e3b29dbc119fa86bc25f822e8c6166552086531 (diff) | |
mfd: lpc_ich: Switch to generic p2sb_bar()
Instead of open coding p2sb_bar() functionality we are going to
use generic library. There is one more user en route.
This is more than just a clean-up. It also fixes a potential issue
seen when SPI BAR is 64-bit. The current code works if and only if
the PCI BAR of the hidden device is inside 4G address space. In case
when firmware decides to go above 4G, we will get a wrong address.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
| -rw-r--r-- | drivers/mfd/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/mfd/lpc_ich.c | 27 |
2 files changed, 9 insertions, 19 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3b59456f5545..9566341de470 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -572,6 +572,7 @@ config LPC_ICH tristate "Intel ICH LPC" depends on PCI select MFD_CORE + select P2SB if X86 help The LPC bridge function of the Intel ICH provides support for many functional units. This driver provides needed support for diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index d9175cb8a2d5..e360651c5406 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -45,6 +45,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/lpc_ich.h> #include <linux/platform_data/itco_wdt.h> +#include <linux/platform_data/x86/p2sb.h> #define ACPIBASE 0x40 #define ACPIBASE_GPE_OFF 0x28 @@ -71,8 +72,6 @@ #define BCR 0xdc #define BCR_WPD BIT(0) -#define SPIBASE_APL_SZ 4096 - #define GPIOBASE_ICH0 0x58 #define GPIOCTRL_ICH0 0x5C #define GPIOBASE_ICH6 0x48 @@ -1134,6 +1133,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev) struct resource *res = &intel_spi_res[0]; struct intel_spi_boardinfo *info; u32 spi_base, rcba; + int ret; info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -1164,30 +1164,19 @@ static int lpc_ich_init_spi(struct pci_dev *dev) } break; - case INTEL_SPI_BXT: { - unsigned int p2sb = PCI_DEVFN(13, 0); - unsigned int spi = PCI_DEVFN(13, 2); - struct pci_bus *bus = dev->bus; - + case INTEL_SPI_BXT: /* * The P2SB is hidden by BIOS and we need to unhide it in * order to read BAR of the SPI flash device. Once that is * done we hide it again. */ - pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0); - pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0, - &spi_base); - if (spi_base != ~0) { - res->start = spi_base & 0xfffffff0; - res->end = res->start + SPIBASE_APL_SZ - 1; - - info->set_writeable = lpc_ich_bxt_set_writeable; - info->data = dev; - } + ret = p2sb_bar(dev->bus, PCI_DEVFN(13, 2), res); + if (ret) + return ret; - pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1); + info->set_writeable = lpc_ich_bxt_set_writeable; + info->data = dev; break; - } default: return -EINVAL; |