Merge tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial fixes from Greg KH:
 "Here are three small tty and serial driver fixes for 6.8-rc5:

   - revert a 8250_pci1xxxx off-by-one change that was incorrect

   - two changes to fix the transmit path of the mxs-auart driver,
     fixing a regression in the 6.2 release

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: mxs-auart: fix tx
  serial: core: introduce uart_port_tx_flags()
  serial: 8250_pci1xxxx: partially revert off by one patch

3 files changed, 32 insertions, 7 deletions

diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index cd258922bd78..2dda737b1660 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -302,7 +302,7 @@ static void pci1xxxx_process_read_data(struct uart_port *port,
 	 * to read, the data is received one byte at a time.
 	 */
 	while (valid_burst_count--) {
-		if (*buff_index >= (RX_BUF_SIZE - UART_BURST_SIZE))
+		if (*buff_index > (RX_BUF_SIZE - UART_BURST_SIZE))
 			break;
 		burst_buf = (u32 *)&rx_buff[*buff_index];
 		*burst_buf = readl(port->membase + UART_RX_BURST_FIFO);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 3ec725555bcc..4749331fe618 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -605,13 +605,16 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s)
 		return;
 	}
 
-	pending = uart_port_tx(&s->port, ch,
+	pending = uart_port_tx_flags(&s->port, ch, UART_TX_NOSTOP,
 		!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF),
 		mxs_write(ch, s, REG_DATA));
 	if (pending)
 		mxs_set(AUART_INTR_TXIEN, s, REG_INTR);
 	else
 		mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
+
+	if (uart_tx_stopped(&s->port))
+               mxs_auart_stop_tx(&s->port);
 }
 
 static void mxs_auart_rx_char(struct mxs_auart_port *s)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 536b2581d3e2..55b1f3ba48ac 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -748,8 +748,17 @@ struct uart_driver {
 
 void uart_write_wakeup(struct uart_port *port);
 
-#define __uart_port_tx(uport, ch, tx_ready, put_char, tx_done, for_test,      \
-		for_post)						      \
+/**
+ * enum UART_TX_FLAGS -- flags for uart_port_tx_flags()
+ *
+ * @UART_TX_NOSTOP: don't call port->ops->stop_tx() on empty buffer
+ */
+enum UART_TX_FLAGS {
+	UART_TX_NOSTOP = BIT(0),
+};
+
+#define __uart_port_tx(uport, ch, flags, tx_ready, put_char, tx_done,	      \
+		       for_test, for_post)				      \
 ({									      \
 	struct uart_port *__port = (uport);				      \
 	struct circ_buf *xmit = &__port->state->xmit;			      \
@@ -777,7 +786,7 @@ void uart_write_wakeup(struct uart_port *port);
 	if (pending < WAKEUP_CHARS) {					      \
 		uart_write_wakeup(__port);				      \
 									      \
-		if (pending == 0)					      \
+		if (!((flags) & UART_TX_NOSTOP) && pending == 0)	      \
 			__port->ops->stop_tx(__port);			      \
 	}								      \
 									      \
@@ -812,7 +821,7 @@ void uart_write_wakeup(struct uart_port *port);
  */
 #define uart_port_tx_limited(port, ch, count, tx_ready, put_char, tx_done) ({ \
 	unsigned int __count = (count);					      \
-	__uart_port_tx(port, ch, tx_ready, put_char, tx_done, __count,	      \
+	__uart_port_tx(port, ch, 0, tx_ready, put_char, tx_done, __count,     \
 			__count--);					      \
 })
 
@@ -826,8 +835,21 @@ void uart_write_wakeup(struct uart_port *port);
  * See uart_port_tx_limited() for more details.
  */
 #define uart_port_tx(port, ch, tx_ready, put_char)			\
-	__uart_port_tx(port, ch, tx_ready, put_char, ({}), true, ({}))
+	__uart_port_tx(port, ch, 0, tx_ready, put_char, ({}), true, ({}))
+
 
+/**
+ * uart_port_tx_flags -- transmit helper for uart_port with flags
+ * @port: uart port
+ * @ch: variable to store a character to be written to the HW
+ * @flags: %UART_TX_NOSTOP or similar
+ * @tx_ready: can HW accept more data function
+ * @put_char: function to write a character
+ *
+ * See uart_port_tx_limited() for more details.
+ */
+#define uart_port_tx_flags(port, ch, flags, tx_ready, put_char)		\
+	__uart_port_tx(port, ch, flags, tx_ready, put_char, ({}), true, ({}))
 /*
  * Baud rate helpers.
  */