Staging: Lindent the echo driver

Lindent drivers/staging/echo*

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 654 insertions, 672 deletions

diff --git a/drivers/staging/echo/bit_operations.h b/drivers/staging/echo/bit_operations.h
index abcd7a2168a7..cecdcf3fd755 100644
--- a/drivers/staging/echo/bit_operations.h
+++ b/drivers/staging/echo/bit_operations.h
@@ -36,14 +36,15 @@
     \return The bit number of the highest set bit, or -1 if the word is zero. */
 static __inline__ int top_bit(unsigned int bits)
 {
-    int res;
-
-    __asm__ (" xorl %[res],%[res];\n"
-             " decl %[res];\n"
-             " bsrl %[bits],%[res]\n"
-             : [res] "=&r" (res)
-             : [bits] "rm" (bits));
-    return res;
+	int res;
+
+	__asm__(" xorl %[res],%[res];\n"
+		" decl %[res];\n"
+		" bsrl %[bits],%[res]\n"
+		:[res] "=&r" (res)
+		:[bits] "rm"(bits)
+	);
+	return res;
 }
 
 /*! \brief Find the bit position of the lowest set bit in a word
@@ -51,84 +52,75 @@ static __inline__ int top_bit(unsigned int bits)
     \return The bit number of the lowest set bit, or -1 if the word is zero. */
 static __inline__ int bottom_bit(unsigned int bits)
 {
-    int res;
-
-    __asm__ (" xorl %[res],%[res];\n"
-             " decl %[res];\n"
-             " bsfl %[bits],%[res]\n"
-             : [res] "=&r" (res)
-             : [bits] "rm" (bits));
-    return res;
+	int res;
+
+	__asm__(" xorl %[res],%[res];\n"
+		" decl %[res];\n"
+		" bsfl %[bits],%[res]\n"
+		:[res] "=&r" (res)
+		:[bits] "rm"(bits)
+	);
+	return res;
 }
 #else
 static __inline__ int top_bit(unsigned int bits)
 {
-    int i;
-
-    if (bits == 0)
-        return -1;
-    i = 0;
-    if (bits & 0xFFFF0000)
-    {
-        bits &= 0xFFFF0000;
-        i += 16;
-    }
-    if (bits & 0xFF00FF00)
-    {
-        bits &= 0xFF00FF00;
-        i += 8;
-    }
-    if (bits & 0xF0F0F0F0)
-    {
-        bits &= 0xF0F0F0F0;
-        i += 4;
-    }
-    if (bits & 0xCCCCCCCC)
-    {
-        bits &= 0xCCCCCCCC;
-        i += 2;
-    }
-    if (bits & 0xAAAAAAAA)
-    {
-        bits &= 0xAAAAAAAA;
-        i += 1;
-    }
-    return i;
+	int i;
+
+	if (bits == 0)
+		return -1;
+	i = 0;
+	if (bits & 0xFFFF0000) {
+		bits &= 0xFFFF0000;
+		i += 16;
+	}
+	if (bits & 0xFF00FF00) {
+		bits &= 0xFF00FF00;
+		i += 8;
+	}
+	if (bits & 0xF0F0F0F0) {
+		bits &= 0xF0F0F0F0;
+		i += 4;
+	}
+	if (bits & 0xCCCCCCCC) {
+		bits &= 0xCCCCCCCC;
+		i += 2;
+	}
+	if (bits & 0xAAAAAAAA) {
+		bits &= 0xAAAAAAAA;
+		i += 1;
+	}
+	return i;
 }
 
 static __inline__ int bottom_bit(unsigned int bits)
 {
-    int i;
-
-    if (bits == 0)
-        return -1;
-    i = 32;
-    if (bits & 0x0000FFFF)
-    {
-        bits &= 0x0000FFFF;
-        i -= 16;
-    }
-    if (bits & 0x00FF00FF)
-    {
-        bits &= 0x00FF00FF;
-        i -= 8;
-    }
-    if (bits & 0x0F0F0F0F)
-    {
-        bits &= 0x0F0F0F0F;
-        i -= 4;
-    }
-    if (bits & 0x33333333)
-    {
-        bits &= 0x33333333;
-        i -= 2;
-    }
-    if (bits & 0x55555555)
-    {
-        bits &= 0x55555555;
-        i -= 1;
-    }
-    return i;
+	int i;
+
+	if (bits == 0)
+		return -1;
+	i = 32;
+	if (bits & 0x0000FFFF) {
+		bits &= 0x0000FFFF;
+		i -= 16;
+	}
+	if (bits & 0x00FF00FF) {
+		bits &= 0x00FF00FF;
+		i -= 8;
+	}
+	if (bits & 0x0F0F0F0F) {
+		bits &= 0x0F0F0F0F;
+		i -= 4;
+	}
+	if (bits & 0x33333333) {
+		bits &= 0x33333333;
+		i -= 2;
+	}
+	if (bits & 0x55555555) {
+		bits &= 0x55555555;
+		i -= 1;
+	}
+	return i;
 }
 #endif
 
@@ -138,13 +130,14 @@ static __inline__ int bottom_bit(unsigned int bits)
 static __inline__ uint8_t bit_reverse8(uint8_t x)
 {
 #if defined(__i386__)  ||  defined(__x86_64__)
-    /* If multiply is fast */
-    return ((x*0x0802U & 0x22110U) | (x*0x8020U & 0x88440U))*0x10101U >> 16;
+	/* If multiply is fast */
+	return ((x * 0x0802U & 0x22110U) | (x * 0x8020U & 0x88440U)) *
+	    0x10101U >> 16;
 #else
-    /* If multiply is slow, but we have a barrel shifter */
-    x = (x >> 4) | (x << 4);
-    x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2);
-    return ((x & 0xAA) >> 1) | ((x & 0x55) << 1);
+	/* If multiply is slow, but we have a barrel shifter */
+	x = (x >> 4) | (x << 4);
+	x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2);
+	return ((x & 0xAA) >> 1) | ((x & 0x55) << 1);
 #endif
 }
 
@@ -184,7 +177,7 @@ uint16_t make_mask16(uint16_t x);
     \return The word with the single set bit. */
 static __inline__ uint32_t least_significant_one32(uint32_t x)
 {
-    return (x & (-(int32_t) x));
+	return (x & (-(int32_t) x));
 }
 
 /*! \brief Find the most significant one in a word, and return a word
@@ -194,10 +187,10 @@ static __inline__ uint32_t least_significant_one32(uint32_t x)
 static __inline__ uint32_t most_significant_one32(uint32_t x)
 {
 #if defined(__i386__)  ||  defined(__x86_64__)
-    return 1 << top_bit(x);
+	return 1 << top_bit(x);
 #else
-    x = make_mask32(x);
-    return (x ^ (x >> 1));
+	x = make_mask32(x);
+	return (x ^ (x >> 1));
 #endif
 }
 
@@ -206,8 +199,8 @@ static __inline__ uint32_t most_significant_one32(uint32_t x)
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity8(uint8_t x)
 {
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
 
 /*! \brief Find the parity of a 16 bit word.
@@ -215,9 +208,9 @@ static __inline__ int parity8(uint8_t x)
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity16(uint16_t x)
 {
-    x ^= (x >> 8);
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x ^= (x >> 8);
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
 
 /*! \brief Find the parity of a 32 bit word.
@@ -225,10 +218,10 @@ static __inline__ int parity16(uint16_t x)
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity32(uint32_t x)
 {
-    x ^= (x >> 16);
-    x ^= (x >> 8);
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x ^= (x >> 16);
+	x ^= (x >> 8);
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
 
 #endif
diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c
index ad18a9593937..b8f2c5e9dee5 100644
--- a/drivers/staging/echo/echo.c
+++ b/drivers/staging/echo/echo.c
@@ -74,7 +74,6 @@
 
    Steve also has some nice notes on echo cancellers in echo.h
 
-
    References:
 
    [1] Ochiai, Areseki, and Ogihara, "Echo Canceller with Two Echo
@@ -105,7 +104,7 @@
    Mark, Pawel, and Pavel.
 */
 
-#include <linux/kernel.h>       /* We're doing kernel work */
+#include <linux/kernel.h>	/* We're doing kernel work */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -115,8 +114,8 @@
 
 #define MIN_TX_POWER_FOR_ADAPTION   64
 #define MIN_RX_POWER_FOR_ADAPTION   64
-#define DTD_HANGOVER               600     /* 600 samples, or 75ms     */
-#define DC_LOG2BETA                  3     /* log2() of DC filter Beta */
+#define DTD_HANGOVER               600	/* 600 samples, or 75ms     */
+#define DC_LOG2BETA                  3	/* log2() of DC filter Beta */
 
 /*-----------------------------------------------------------------------*\
                                FUNCTIONS
@@ -124,59 +123,58 @@
 
 /* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */
 
-
 #ifdef __bfin__
-static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean, int shift)
+static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean,
+				    int shift)
 {
-    int i, j;
-    int offset1;
-    int offset2;
-    int factor;
-    int exp;
-    int16_t *phist;
-    int n;
-
-    if (shift > 0)
-	factor = clean << shift;
-    else
-	factor = clean >> -shift;
-
-    /* Update the FIR taps */
-
-    offset2 = ec->curr_pos;
-    offset1 = ec->taps - offset2;
-    phist = &ec->fir_state_bg.history[offset2];
-
-    /* st: and en: help us locate the assembler in echo.s */
-
-    //asm("st:");
-    n = ec->taps;
-    for (i = 0, j = offset2;  i < n;  i++, j++)
-    {
-       exp = *phist++ * factor;
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
-    //asm("en:");
-
-    /* Note the asm for the inner loop above generated by Blackfin gcc
-       4.1.1 is pretty good (note even parallel instructions used):
-
-    	R0 = W [P0++] (X);
-	R0 *= R2;
-	R0 = R0 + R3 (NS) ||
-	R1 = W [P1] (X) ||
-	nop;
-	R0 >>>= 15;
-	R0 = R0 + R1;
-	W [P1++] = R0;
-
-	A block based update algorithm would be much faster but the
-	above can't be improved on much.  Every instruction saved in
-	the loop above is 2 MIPs/ch!  The for loop above is where the
-	Blackfin spends most of it's time - about 17 MIPs/ch measured
-	with speedtest.c with 256 taps (32ms).  Write-back and
-	Write-through cache gave about the same performance.
-    */
+	int i, j;
+	int offset1;
+	int offset2;
+	int factor;
+	int exp;
+	int16_t *phist;
+	int n;
+
+	if (shift > 0)
+		factor = clean << shift;
+	else
+		factor = clean >> -shift;
+
+	/* Update the FIR taps */
+
+	offset2 = ec->curr_pos;
+	offset1 = ec->taps - offset2;
+	phist = &ec->fir_state_bg.history[offset2];
+
+	/* st: and en: help us locate the assembler in echo.s */
+
+	//asm("st:");
+	n = ec->taps;
+	for (i = 0, j = offset2; i < n; i++, j++) {
+		exp = *phist++ * factor;
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
+	//asm("en:");
+
+	/* Note the asm for the inner loop above generated by Blackfin gcc
+	   4.1.1 is pretty good (note even parallel instructions used):
+
+	   R0 = W [P0++] (X);
+	   R0 *= R2;
+	   R0 = R0 + R3 (NS) ||
+	   R1 = W [P1] (X) ||
+	   nop;
+	   R0 >>>= 15;
+	   R0 = R0 + R1;
+	   W [P1++] = R0;
+
+	   A block based update algorithm would be much faster but the
+	   above can't be improved on much.  Every instruction saved in
+	   the loop above is 2 MIPs/ch!  The for loop above is where the
+	   Blackfin spends most of it's time - about 17 MIPs/ch measured
+	   with speedtest.c with 256 taps (32ms).  Write-back and
+	   Write-through cache gave about the same performance.
+	 */
 }
 
 /*
@@ -198,94 +196,90 @@ static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean, int shift
 */
 
 #else
-static __inline__ void lms_adapt_bg(struct oslec_state *ec, int clean, int shift)
+static __inline__ void lms_adapt_bg(struct oslec_state *ec, int clean,
+				    int shift)
 {
-    int i;
-
-    int offset1;
-    int offset2;
-    int factor;
-    int exp;
-
-    if (shift > 0)
-	factor = clean << shift;
-    else
-	factor = clean >> -shift;
-
-    /* Update the FIR taps */
-
-    offset2 = ec->curr_pos;
-    offset1 = ec->taps - offset2;
-
-    for (i = ec->taps - 1;  i >= offset1;  i--)
-    {
-       exp = (ec->fir_state_bg.history[i - offset1]*factor);
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
-    for (  ;  i >= 0;  i--)
-    {
-       exp = (ec->fir_state_bg.history[i + offset2]*factor);
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
+	int i;
+
+	int offset1;
+	int offset2;
+	int factor;
+	int exp;
+
+	if (shift > 0)
+		factor = clean << shift;
+	else
+		factor = clean >> -shift;
+
+	/* Update the FIR taps */
+
+	offset2 = ec->curr_pos;
+	offset1 = ec->taps - offset2;
+
+	for (i = ec->taps - 1; i >= offset1; i--) {
+		exp = (ec->fir_state_bg.history[i - offset1] * factor);
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
+	for (; i >= 0; i--) {
+		exp = (ec->fir_state_bg.history[i + offset2] * factor);
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
 }
 #endif
 
-
 struct oslec_state *oslec_create(int len, int adaption_mode)
 {
-    struct oslec_state *ec;
-    int i;
-
-    ec = kzalloc(sizeof(*ec), GFP_KERNEL);
-    if (!ec)
-        return NULL;
-
-    ec->taps = len;
-    ec->log2taps = top_bit(len);
-    ec->curr_pos = ec->taps - 1;
-
-    for (i = 0; i < 2; i++) {
-        ec->fir_taps16[i] = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
-        if (!ec->fir_taps16[i])
-	    goto error_oom;
-    }
-
-    fir16_create(&ec->fir_state,
-                 ec->fir_taps16[0],
-                 ec->taps);
-    fir16_create(&ec->fir_state_bg,
-                 ec->fir_taps16[1],
-                 ec->taps);
-
-    for(i=0; i<5; i++) {
-      ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0;
-    }
-
-    ec->cng_level = 1000;
-    oslec_adaption_mode(ec, adaption_mode);
-
-    ec->snapshot = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
-    if (!ec->snapshot)
-        goto error_oom;
-
-    ec->cond_met = 0;
-    ec->Pstates = 0;
-    ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
-    ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
-    ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
-    ec->Lbgn = ec->Lbgn_acc = 0;
-    ec->Lbgn_upper = 200;
-    ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
-
-    return  ec;
-
-error_oom:
-    for (i = 0; i < 2; i++)
-        kfree(ec->fir_taps16[i]);
-
-    kfree(ec);
-    return NULL;
+	struct oslec_state *ec;
+	int i;
+
+	ec = kzalloc(sizeof(*ec), GFP_KERNEL);
+	if (!ec)
+		return NULL;
+
+	ec->taps = len;
+	ec->log2taps = top_bit(len);
+	ec->curr_pos = ec->taps - 1;
+
+	for (i = 0; i < 2; i++) {
+		ec->fir_taps16[i] =
+		    kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
+		if (!ec->fir_taps16[i])
+			goto error_oom;
+	}
+
+	fir16_create(&ec->fir_state, ec->fir_taps16[0], ec->taps);
+	fir16_create(&ec->fir_state_bg, ec->fir_taps16[1], ec->taps);
+
+	for (i = 0; i < 5; i++) {
+		ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0;
+	}
+
+	ec->cng_level = 1000;
+	oslec_adaption_mode(ec, adaption_mode);
+
+	ec->snapshot = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
+	if (!ec->snapshot)
+		goto error_oom;
+
+	ec->cond_met = 0;
+	ec->Pstates = 0;
+	ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
+	ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
+	ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
+	ec->Lbgn = ec->Lbgn_acc = 0;
+	ec->Lbgn_upper = 200;
+	ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
+
+	return ec;
+
+      error_oom:
+	for (i = 0; i < 2; i++)
+		kfree(ec->fir_taps16[i]);
+
+	kfree(ec);
+	return NULL;
 }
+
 EXPORT_SYMBOL_GPL(oslec_create);
 
 void oslec_free(struct oslec_state *ec)
@@ -294,293 +288,300 @@ void oslec_free(struct oslec_state *ec)
 
 	fir16_free(&ec->fir_state);
 	fir16_free(&ec->fir_state_bg);
-	for (i = 0;  i < 2;  i++)
+	for (i = 0; i < 2; i++)
 		kfree(ec->fir_taps16[i]);
 	kfree(ec->snapshot);
 	kfree(ec);
 }
+
 EXPORT_SYMBOL_GPL(oslec_free);
 
 void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode)
 {
-    ec->adaption_mode = adaption_mode;
+	ec->adaption_mode = adaption_mode;
 }
+
 EXPORT_SYMBOL_GPL(oslec_adaption_mode);
 
 void oslec_flush(struct oslec_state *ec)
 {
-    int i;
+	int i;
 
-    ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
-    ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
-    ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
+	ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
+	ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
+	ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
 
-    ec->Lbgn = ec->Lbgn_acc = 0;
-    ec->Lbgn_upper = 200;
-    ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
+	ec->Lbgn = ec->Lbgn_acc = 0;
+	ec->Lbgn_upper = 200;
+	ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
 
-    ec->nonupdate_dwell = 0;
+	ec->nonupdate_dwell = 0;
 
-    fir16_flush(&ec->fir_state);
-    fir16_flush(&ec->fir_state_bg);
-    ec->fir_state.curr_pos = ec->taps - 1;
-    ec->fir_state_bg.curr_pos = ec->taps - 1;
-    for (i = 0;  i < 2;  i++)
-        memset(ec->fir_taps16[i], 0, ec->taps*sizeof(int16_t));
+	fir16_flush(&ec->fir_state);
+	fir16_flush(&ec->fir_state_bg);
+	ec->fir_state.curr_pos = ec->taps - 1;
+	ec->fir_state_bg.curr_pos = ec->taps - 1;
+	for (i = 0; i < 2; i++)
+		memset(ec->fir_taps16[i], 0, ec->taps * sizeof(int16_t));
 
-    ec->curr_pos = ec->taps - 1;
-    ec->Pstates = 0;
+	ec->curr_pos = ec->taps - 1;
+	ec->Pstates = 0;
 }
+
 EXPORT_SYMBOL_GPL(oslec_flush);
 
-void oslec_snapshot(struct oslec_state *ec) {
-    memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps*sizeof(int16_t));
+void oslec_snapshot(struct oslec_state *ec)
+{
+	memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps * sizeof(int16_t));
 }
+
 EXPORT_SYMBOL_GPL(oslec_snapshot);
 
 /* Dual Path Echo Canceller ------------------------------------------------*/
 
 int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx)
 {
-    int32_t echo_value;
-    int clean_bg;
-    int tmp, tmp1;
-
-    /* Input scaling was found be required to prevent problems when tx
-       starts clipping.  Another possible way to handle this would be the
-       filter coefficent scaling. */
-
-    ec->tx = tx; ec->rx = rx;
-    tx >>=1;
-    rx >>=1;
-
-    /*
-       Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required
-       otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta)
-       only real axis.  Some chip sets (like Si labs) don't need
-       this, but something like a $10 X100P card does.  Any DC really slows
-       down convergence.
-
-       Note: removes some low frequency from the signal, this reduces
-       the speech quality when listening to samples through headphones
-       but may not be obvious through a telephone handset.
-
-       Note that the 3dB frequency in radians is approx Beta, e.g. for
-       Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz.
-    */
-
-    if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) {
-      tmp = rx << 15;
+	int32_t echo_value;
+	int clean_bg;
+	int tmp, tmp1;
+
+	/* Input scaling was found be required to prevent problems when tx
+	   starts clipping.  Another possible way to handle this would be the
+	   filter coefficent scaling. */
+
+	ec->tx = tx;
+	ec->rx = rx;
+	tx >>= 1;
+	rx >>= 1;
+
+	/*
+	   Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required
+	   otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta)
+	   only real axis.  Some chip sets (like Si labs) don't need
+	   this, but something like a $10 X100P card does.  Any DC really slows
+	   down convergence.
+
+	   Note: removes some low frequency from the signal, this reduces
+	   the speech quality when listening to samples through headphones
+	   but may not be obvious through a telephone handset.
+
+	   Note that the 3dB frequency in radians is approx Beta, e.g. for
+	   Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz.
+	 */
+
+	if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) {
+		tmp = rx << 15;
 #if 1
-        /* Make sure the gain of the HPF is 1.0. This can still saturate a little under
-           impulse conditions, and it might roll to 32768 and need clipping on sustained peak
-           level signals. However, the scale of such clipping is small, and the error due to
-           any saturation should not markedly affect the downstream processing. */
-        tmp -= (tmp >> 4);
+		/* Make sure the gain of the HPF is 1.0. This can still saturate a little under
+		   impulse conditions, and it might roll to 32768 and need clipping on sustained peak
+		   level signals. However, the scale of such clipping is small, and the error due to
+		   any saturation should not markedly affect the downstream processing. */
+		tmp -= (tmp >> 4);
 #endif
-      ec->rx_1 += -(ec->rx_1>>DC_LOG2BETA) + tmp - ec->rx_2;
+		ec->rx_1 += -(ec->rx_1 >> DC_LOG2BETA) + tmp - ec->rx_2;
+
+		/* hard limit filter to prevent clipping.  Note that at this stage
+		   rx should be limited to +/- 16383 due to right shift above */
+		tmp1 = ec->rx_1 >> 15;
+		if (tmp1 > 16383)
+			tmp1 = 16383;
+		if (tmp1 < -16383)
+			tmp1 = -16383;
+		rx = tmp1;
+		ec->rx_2 = tmp;
+	}
 
-      /* hard limit filter to prevent clipping.  Note that at this stage
-	 rx should be limited to +/- 16383 due to right shift above */
-      tmp1 = ec->rx_1 >> 15;
-      if (tmp1 > 16383) tmp1 = 16383;
-      if (tmp1 < -16383) tmp1 = -16383;
-      rx = tmp1;
-      ec->rx_2 = tmp;
-    }
+	/* Block average of power in the filter states.  Used for
+	   adaption power calculation. */
 
-    /* Block average of power in the filter states.  Used for
-       adaption power calculation. */
+	{
+		int new, old;
+
+		/* efficient "out with the old and in with the new" algorithm so
+		   we don't have to recalculate over the whole block of
+		   samples. */
+		new = (int)tx *(int)tx;
+		old = (int)ec->fir_state.history[ec->fir_state.curr_pos] *
+		    (int)ec->fir_state.history[ec->fir_state.curr_pos];
+		ec->Pstates +=
+		    ((new - old) + (1 << ec->log2taps)) >> ec->log2taps;
+		if (ec->Pstates < 0)
+			ec->Pstates = 0;
+	}
 
-    {
-	int new, old;
+	/* Calculate short term average levels using simple single pole IIRs */
 
-	/* efficient "out with the old and in with the new" algorithm so
-	   we don't have to recalculate over the whole block of
-	   samples. */
-	new = (int)tx * (int)tx;
-	old = (int)ec->fir_state.history[ec->fir_state.curr_pos] *
-              (int)ec->fir_state.history[ec->fir_state.curr_pos];
-	ec->Pstates += ((new - old) + (1<<ec->log2taps)) >> ec->log2taps;
-	if (ec->Pstates < 0) ec->Pstates = 0;
-    }
-
-    /* Calculate short term average levels using simple single pole IIRs */
-
-    ec->Ltxacc += abs(tx) - ec->Ltx;
-    ec->Ltx = (ec->Ltxacc + (1<<4)) >> 5;
-    ec->Lrxacc += abs(rx) - ec->Lrx;
-    ec->Lrx = (ec->Lrxacc + (1<<4)) >> 5;
-
-    /* Foreground filter ---------------------------------------------------*/
-
-    ec->fir_state.coeffs = ec->fir_taps16[0];
-    echo_value = fir16(&ec->fir_state, tx);
-    ec->clean = rx - echo_value;
-    ec->Lcleanacc += abs(ec->clean) - ec->Lclean;
-    ec->Lclean = (ec->Lcleanacc + (1<<4)) >> 5;
-
-    /* Background filter ---------------------------------------------------*/
-
-    echo_value = fir16(&ec->fir_state_bg, tx);
-    clean_bg = rx - echo_value;
-    ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg;
-    ec->Lclean_bg = (ec->Lclean_bgacc + (1<<4)) >> 5;
-
-    /* Background Filter adaption -----------------------------------------*/
-
-    /* Almost always adap bg filter, just simple DT and energy
-       detection to minimise adaption in cases of strong double talk.
-       However this is not critical for the dual path algorithm.
-    */
-    ec->factor = 0;
-    ec->shift = 0;
-    if ((ec->nonupdate_dwell == 0)) {
-	int   P, logP, shift;
-
-	/* Determine:
-
-	   f = Beta * clean_bg_rx/P ------ (1)
-
-	   where P is the total power in the filter states.
-
-	   The Boffins have shown that if we obey (1) we converge
-	   quickly and avoid instability.
-
-	   The correct factor f must be in Q30, as this is the fixed
-	   point format required by the lms_adapt_bg() function,
-	   therefore the scaled version of (1) is:
-
-	   (2^30) * f  = (2^30) * Beta * clean_bg_rx/P
-	       factor  = (2^30) * Beta * clean_bg_rx/P         ----- (2)
-
-	   We have chosen Beta = 0.25 by experiment, so:
-
-	       factor  = (2^30) * (2^-2) * clean_bg_rx/P
-
-                                       (30 - 2 - log2(P))
-	       factor  = clean_bg_rx 2                         ----- (3)
-
-	   To avoid a divide we approximate log2(P) as top_bit(P),
-	   which returns the position of the highest non-zero bit in
-	   P.  This approximation introduces an error as large as a
-	   factor of 2, but the algorithm seems to handle it OK.
-
-	   Come to think of it a divide may not be a big deal on a
-	   modern DSP, so its probably worth checking out the cycles
-	   for a divide versus a top_bit() implementation.
-	*/
-
-	P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates;
-	logP = top_bit(P) + ec->log2taps;
-	shift = 30 - 2 - logP;
-	ec->shift = shift;
-
-	lms_adapt_bg(ec, clean_bg, shift);
-    }
-
-    /* very simple DTD to make sure we dont try and adapt with strong
-       near end speech */
-
-    ec->adapt = 0;
-    if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx))
-	ec->nonupdate_dwell = DTD_HANGOVER;
-    if (ec->nonupdate_dwell)
-	ec->nonupdate_dwell--;
+	ec->Ltxacc += abs(tx) - ec->Ltx;
+	ec->Ltx = (ec->Ltxacc + (1 << 4)) >> 5;
+	ec->Lrxacc += abs(rx) - ec->Lrx;
+	ec->Lrx = (ec->Lrxacc + (1 << 4)) >> 5;
 
-    /* Transfer logic ------------------------------------------------------*/
+	/* Foreground filter --------------------------------------------------- */
 
-    /* These conditions are from the dual path paper [1], I messed with
-       them a bit to improve performance. */
+	ec->fir_state.coeffs = ec->fir_taps16[0];
+	echo_value = fir16(&ec->fir_state, tx);
+	ec->clean = rx - echo_value;
+	ec->Lcleanacc += abs(ec->clean) - ec->Lclean;
+	ec->Lclean = (ec->Lcleanacc + (1 << 4)) >> 5;
 
-    if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) &&
-	(ec->nonupdate_dwell == 0) &&
-	(8*ec->Lclean_bg < 7*ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ &&
-	(8*ec->Lclean_bg < ec->Ltx)      /* (ec->Lclean_bg < 0.125*ec->Ltx)    */ )
-    {
-	if (ec->cond_met == 6) {
-	    /* BG filter has had better results for 6 consecutive samples */
-	    ec->adapt = 1;
-	    memcpy(ec->fir_taps16[0], ec->fir_taps16[1], ec->taps*sizeof(int16_t));
-	}
-	else
-	    ec->cond_met++;
-    }
-    else
-	ec->cond_met = 0;
+	/* Background filter --------------------------------------------------- */
 
-    /* Non-Linear Processing ---------------------------------------------------*/
+	echo_value = fir16(&ec->fir_state_bg, tx);
+	clean_bg = rx - echo_value;
+	ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg;
+	ec->Lclean_bg = (ec->Lclean_bgacc + (1 << 4)) >> 5;
 
-    ec->clean_nlp = ec->clean;
-    if (ec->adaption_mode & ECHO_CAN_USE_NLP)
-    {
-        /* Non-linear processor - a fancy way to say "zap small signals, to avoid
-           residual echo due to (uLaw/ALaw) non-linearity in the channel.". */
+	/* Background Filter adaption ----------------------------------------- */
 
-      if ((16*ec->Lclean < ec->Ltx))
-      {
-	/* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB,
-	   so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */
-        if (ec->adaption_mode & ECHO_CAN_USE_CNG)
-	{
-	    ec->cng_level = ec->Lbgn;
-
-	    /* Very elementary comfort noise generation.  Just random
-	       numbers rolled off very vaguely Hoth-like.  DR: This
-	       noise doesn't sound quite right to me - I suspect there
-	       are some overlfow issues in the filtering as it's too
-	       "crackly".  TODO: debug this, maybe just play noise at
-	       high level or look at spectrum.
-	    */
-
-	    ec->cng_rndnum = 1664525U*ec->cng_rndnum + 1013904223U;
-	    ec->cng_filter = ((ec->cng_rndnum & 0xFFFF) - 32768 + 5*ec->cng_filter) >> 3;
-	    ec->clean_nlp = (ec->cng_filter*ec->cng_level*8) >> 14;
-
-        }
-        else if (ec->adaption_mode & ECHO_CAN_USE_CLIP)
-	{
-	    /* This sounds much better than CNG */
-	    if (ec->clean_nlp > ec->Lbgn)
-	      ec->clean_nlp = ec->Lbgn;
-	    if (ec->clean_nlp < -ec->Lbgn)
-	      ec->clean_nlp = -ec->Lbgn;
+	/* Almost always adap bg filter, just simple DT and energy
+	   detection to minimise adaption in cases of strong double talk.
+	   However this is not critical for the dual path algorithm.
+	 */
+	ec->factor = 0;
+	ec->shift = 0;
+	if ((ec->nonupdate_dwell == 0)) {
+		int P, logP, shift;
+
+		/* Determine:
+
+		   f = Beta * clean_bg_rx/P ------ (1)
+
+		   where P is the total power in the filter states.
+
+		   The Boffins have shown that if we obey (1) we converge
+		   quickly and avoid instability.
+
+		   The correct factor f must be in Q30, as this is the fixed
+		   point format required by the lms_adapt_bg() function,
+		   therefore the scaled version of (1) is:
+
+		   (2^30) * f  = (2^30) * Beta * clean_bg_rx/P
+		   factor  = (2^30) * Beta * clean_bg_rx/P         ----- (2)
+
+		   We have chosen Beta = 0.25 by experiment, so:
+
+		   factor  = (2^30) * (2^-2) * clean_bg_rx/P
+
+		   (30 - 2 - log2(P))
+		   factor  = clean_bg_rx 2                         ----- (3)
+
+		   To avoid a divide we approximate log2(P) as top_bit(P),
+		   which returns the position of the highest non-zero bit in
+		   P.  This approximation introduces an error as large as a
+		   factor of 2, but the algorithm seems to handle it OK.
+
+		   Come to think of it a divide may not be a big deal on a
+		   modern DSP, so its probably worth checking out the cycles
+		   for a divide versus a top_bit() implementation.
+		 */
+
+		P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates;
+		logP = top_bit(P) + ec->log2taps;
+		shift = 30 - 2 - logP;
+		ec->shift = shift;
+
+		lms_adapt_bg(ec, clean_bg, shift);
 	}
-	else
-        {
-	  /* just mute the residual, doesn't sound very good, used mainly
-	     in G168 tests */
-          ec->clean_nlp = 0;
-        }
-      }
-      else {
-	  /* Background noise estimator.  I tried a few algorithms
-	     here without much luck.  This very simple one seems to
-	     work best, we just average the level using a slow (1 sec
-	     time const) filter if the current level is less than a
-	     (experimentally derived) constant.  This means we dont
-	     include high level signals like near end speech.  When
-	     combined with CNG or especially CLIP seems to work OK.
-	  */
-	  if (ec->Lclean < 40) {
-	      ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn;
-	      ec->Lbgn = (ec->Lbgn_acc + (1<<11)) >> 12;
-	  }
-       }
-    }
-
-    /* Roll around the taps buffer */
-    if (ec->curr_pos <= 0)
-        ec->curr_pos = ec->taps;
-    ec->curr_pos--;
-
-    if (ec->adaption_mode & ECHO_CAN_DISABLE)
-      ec->clean_nlp = rx;
-
-    /* Output scaled back up again to match input scaling */
-
-    return (int16_t) ec->clean_nlp << 1;
+
+	/* very simple DTD to make sure we dont try and adapt with strong
+	   near end speech */
+
+	ec->adapt = 0;
+	if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx))
+		ec->nonupdate_dwell = DTD_HANGOVER;
+	if (ec->nonupdate_dwell)
+		ec->nonupdate_dwell--;
+
+	/* Transfer logic ------------------------------------------------------ */
+
+	/* These conditions are from the dual path paper [1], I messed with
+	   them a bit to improve performance. */
+
+	if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) &&
+	    (ec->nonupdate_dwell == 0) &&
+	    (8 * ec->Lclean_bg <
+	     7 * ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ &&
+	    (8 * ec->Lclean_bg <
+	     ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx)    */ ) {
+		if (ec->cond_met == 6) {
+			/* BG filter has had better results for 6 consecutive samples */
+			ec->adapt = 1;
+			memcpy(ec->fir_taps16[0], ec->fir_taps16[1],
+			       ec->taps * sizeof(int16_t));
+		} else
+			ec->cond_met++;
+	} else
+		ec->cond_met = 0;
+
+	/* Non-Linear Processing --------------------------------------------------- */
+
+	ec->clean_nlp = ec->clean;
+	if (ec->adaption_mode & ECHO_CAN_USE_NLP) {
+		/* Non-linear processor - a fancy way to say "zap small signals, to avoid
+		   residual echo due to (uLaw/ALaw) non-linearity in the channel.". */
+
+		if ((16 * ec->Lclean < ec->Ltx)) {
+			/* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB,
+			   so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */
+			if (ec->adaption_mode & ECHO_CAN_USE_CNG) {
+				ec->cng_level = ec->Lbgn;
+
+				/* Very elementary comfort noise generation.  Just random
+				   numbers rolled off very vaguely Hoth-like.  DR: This
+				   noise doesn't sound quite right to me - I suspect there
+				   are some overlfow issues in the filtering as it's too
+				   "crackly".  TODO: debug this, maybe just play noise at
+				   high level or look at spectrum.
+				 */
+
+				ec->cng_rndnum =
+				    1664525U * ec->cng_rndnum + 1013904223U;
+				ec->cng_filter =
+				    ((ec->cng_rndnum & 0xFFFF) - 32768 +
+				     5 * ec->cng_filter) >> 3;
+				ec->clean_nlp =
+				    (ec->cng_filter * ec->cng_level * 8) >> 14;
+
+			} else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) {
+				/* This sounds much better than CNG */
+				if (ec->clean_nlp > ec->Lbgn)
+					ec->clean_nlp = ec->Lbgn;
+				if (ec->clean_nlp < -ec->Lbgn)
+					ec->clean_nlp = -ec->Lbgn;
+			} else {
+				/* just mute the residual, doesn't sound very good, used mainly
+				   in G168 tests */
+				ec->clean_nlp = 0;
+			}
+		} else {
+			/* Background noise estimator.  I tried a few algorithms
+			   here without much luck.  This very simple one seems to
+			   work best, we just average the level using a slow (1 sec
+			   time const) filter if the current level is less than a
+			   (experimentally derived) constant.  This means we dont
+			   include high level signals like near end speech.  When
+			   combined with CNG or especially CLIP seems to work OK.
+			 */
+			if (ec->Lclean < 40) {
+				ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn;
+				ec->Lbgn = (ec->Lbgn_acc + (1 << 11)) >> 12;
+			}
+		}
+	}
+
+	/* Roll around the taps buffer */
+	if (ec->curr_pos <= 0)
+		ec->curr_pos = ec->taps;
+	ec->curr_pos--;
+
+	if (ec->adaption_mode & ECHO_CAN_DISABLE)
+		ec->clean_nlp = rx;
+
+	/* Output scaled back up again to match input scaling */
+
+	return (int16_t) ec->clean_nlp << 1;
 }
+
 EXPORT_SYMBOL_GPL(oslec_update);
 
 /* This function is seperated from the echo canceller is it is usually called
@@ -604,28 +605,32 @@ EXPORT_SYMBOL_GPL(oslec_update);
    precision, which noise shapes things, giving very clean DC removal.
 */
 
-int16_t oslec_hpf_tx(struct oslec_state *ec, int16_t tx) {
-    int tmp, tmp1;
+int16_t oslec_hpf_tx(struct oslec_state * ec, int16_t tx)
+{
+	int tmp, tmp1;
 
-    if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) {
-        tmp = tx << 15;
+	if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) {
+		tmp = tx << 15;
 #if 1
-        /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under
-           impulse conditions, and it might roll to 32768 and need clipping on sustained peak
-           level signals. However, the scale of such clipping is small, and the error due to
-           any saturation should not markedly affect the downstream processing. */
-        tmp -= (tmp >> 4);
+		/* Make sure the gain of the HPF is 1.0. The first can still saturate a little under
+		   impulse conditions, and it might roll to 32768 and need clipping on sustained peak
+		   level signals. However, the scale of such clipping is small, and the error due to
+		   any saturation should not markedly affect the downstream processing. */
+		tmp -= (tmp >> 4);
 #endif
-        ec->tx_1 += -(ec->tx_1>>DC_LOG2BETA) + tmp - ec->tx_2;
-        tmp1 = ec->tx_1 >> 15;
-	if (tmp1 > 32767) tmp1 = 32767;
-	if (tmp1 < -32767) tmp1 = -32767;
-	tx = tmp1;
-        ec->tx_2 = tmp;
-    }
-
-    return tx;
+		ec->tx_1 += -(ec->tx_1 >> DC_LOG2BETA) + tmp - ec->tx_2;
+		tmp1 = ec->tx_1 >> 15;
+		if (tmp1 > 32767)
+			tmp1 = 32767;
+		if (tmp1 < -32767)
+			tmp1 = -32767;
+		tx = tmp1;
+		ec->tx_2 = tmp;
+	}
+
+	return tx;
 }
+
 EXPORT_SYMBOL_GPL(oslec_hpf_tx);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/echo/echo.h b/drivers/staging/echo/echo.h
index 2a1d1d8a9295..9fb9543c4f13 100644
--- a/drivers/staging/echo/echo.h
+++ b/drivers/staging/echo/echo.h
@@ -124,9 +124,8 @@ a minor burden.
     G.168 echo canceller descriptor. This defines the working state for a line
     echo canceller.
 */
-struct oslec_state
-{
-	int16_t tx,rx;
+struct oslec_state {
+	int16_t tx, rx;
 	int16_t clean;
 	int16_t clean_nlp;
 
@@ -170,4 +169,4 @@ struct oslec_state
 	int16_t *snapshot;
 };
 
-#endif	/* __ECHO_H */
+#endif /* __ECHO_H */
diff --git a/drivers/staging/echo/fir.h b/drivers/staging/echo/fir.h
index e760471e4818..5645cb1b2f90 100644
--- a/drivers/staging/echo/fir.h
+++ b/drivers/staging/echo/fir.h
@@ -72,8 +72,7 @@
     16 bit integer FIR descriptor. This defines the working state for a single
     instance of an FIR filter using 16 bit integer coefficients.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const int16_t *coeffs;
@@ -85,8 +84,7 @@ typedef struct
     instance of an FIR filter using 32 bit integer coefficients, and filtering
     16 bit integer data.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const int32_t *coeffs;
@@ -97,39 +95,37 @@ typedef struct
     Floating point FIR descriptor. This defines the working state for a single
     instance of an FIR filter using floating point coefficients and data.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const float *coeffs;
 	float *history;
 } fir_float_state_t;
 
-static __inline__ const int16_t *fir16_create(fir16_state_t *fir,
-                                              const int16_t *coeffs,
-                                              int taps)
+static __inline__ const int16_t *fir16_create(fir16_state_t * fir,
+					      const int16_t * coeffs, int taps)
 {
 	fir->taps = taps;
 	fir->curr_pos = taps - 1;
 	fir->coeffs = coeffs;
 #if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__bfin__)
-	fir->history = kcalloc(2*taps, sizeof(int16_t), GFP_KERNEL);
+	fir->history = kcalloc(2 * taps, sizeof(int16_t), GFP_KERNEL);
 #else
 	fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL);
 #endif
 	return fir->history;
 }
 
-static __inline__ void fir16_flush(fir16_state_t *fir)
+static __inline__ void fir16_flush(fir16_state_t * fir)
 {
 #if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__bfin__)
-    memset(fir->history, 0, 2*fir->taps*sizeof(int16_t));
+	memset(fir->history, 0, 2 * fir->taps * sizeof(int16_t));
 #else
-    memset(fir->history, 0, fir->taps*sizeof(int16_t));
+	memset(fir->history, 0, fir->taps * sizeof(int16_t));
 #endif
 }
 
-static __inline__ void fir16_free(fir16_state_t *fir)
+static __inline__ void fir16_free(fir16_state_t * fir)
 {
 	kfree(fir->history);
 }
@@ -137,166 +133,162 @@ static __inline__ void fir16_free(fir16_state_t *fir)
 #ifdef __bfin__
 static inline int32_t dot_asm(short *x, short *y, int len)
 {
-   int dot;
-
-   len--;
-
-   __asm__
-   (
-   "I0 = %1;\n\t"
-   "I1 = %2;\n\t"
-   "A0 = 0;\n\t"
-   "R0.L = W[I0++] || R1.L = W[I1++];\n\t"
-   "LOOP dot%= LC0 = %3;\n\t"
-   "LOOP_BEGIN dot%=;\n\t"
-      "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t"
-   "LOOP_END dot%=;\n\t"
-   "A0 += R0.L*R1.L (IS);\n\t"
-   "R0 = A0;\n\t"
-   "%0 = R0;\n\t"
-   : "=&d" (dot)
-   : "a" (x), "a" (y), "a" (len)
-   : "I0", "I1", "A1", "A0", "R0", "R1"
-   );
-
-   return dot;
+	int dot;
+
+	len--;
+
+	__asm__("I0 = %1;\n\t"
+		"I1 = %2;\n\t"
+		"A0 = 0;\n\t"
+		"R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+		"LOOP dot%= LC0 = %3;\n\t"
+		"LOOP_BEGIN dot%=;\n\t"
+		"A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+		"LOOP_END dot%=;\n\t"
+		"A0 += R0.L*R1.L (IS);\n\t"
+		"R0 = A0;\n\t"
+		"%0 = R0;\n\t"
+		:"=&d"(dot)
+		:"a"(x), "a"(y), "a"(len)
+		:"I0", "I1", "A1", "A0", "R0", "R1"
+	);
+
+	return dot;
 }
 #endif
 
-static __inline__ int16_t fir16(fir16_state_t *fir, int16_t sample)
+static __inline__ int16_t fir16(fir16_state_t * fir, int16_t sample)
 {
-    int32_t y;
+	int32_t y;
 #if defined(USE_MMX)
-    int i;
-    mmx_t *mmx_coeffs;
-    mmx_t *mmx_hist;
-
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
-
-    mmx_coeffs = (mmx_t *) fir->coeffs;
-    mmx_hist = (mmx_t *) &fir->history[fir->curr_pos];
-    i = fir->taps;
-    pxor_r2r(mm4, mm4);
-    /* 8 samples per iteration, so the filter must be a multiple of 8 long. */
-    while (i > 0)
-    {
-        movq_m2r(mmx_coeffs[0], mm0);
-        movq_m2r(mmx_coeffs[1], mm2);
-        movq_m2r(mmx_hist[0], mm1);
-        movq_m2r(mmx_hist[1], mm3);
-        mmx_coeffs += 2;
-        mmx_hist += 2;
-        pmaddwd_r2r(mm1, mm0);
-        pmaddwd_r2r(mm3, mm2);
-        paddd_r2r(mm0, mm4);
-        paddd_r2r(mm2, mm4);
-        i -= 8;
-    }
-    movq_r2r(mm4, mm0);
-    psrlq_i2r(32, mm0);
-    paddd_r2r(mm0, mm4);
-    movd_r2m(mm4, y);
-    emms();
+	int i;
+	mmx_t *mmx_coeffs;
+	mmx_t *mmx_hist;
+
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
+
+	mmx_coeffs = (mmx_t *) fir->coeffs;
+	mmx_hist = (mmx_t *) & fir->history[fir->curr_pos];
+	i = fir->taps;
+	pxor_r2r(mm4, mm4);
+	/* 8 samples per iteration, so the filter must be a multiple of 8 long. */
+	while (i > 0) {
+		movq_m2r(mmx_coeffs[0], mm0);
+		movq_m2r(mmx_coeffs[1], mm2);
+		movq_m2r(mmx_hist[0], mm1);
+		movq_m2r(mmx_hist[1], mm3);
+		mmx_coeffs += 2;
+		mmx_hist += 2;
+		pmaddwd_r2r(mm1, mm0);
+		pmaddwd_r2r(mm3, mm2);
+		paddd_r2r(mm0, mm4);
+		paddd_r2r(mm2, mm4);
+		i -= 8;
+	}
+	movq_r2r(mm4, mm0);
+	psrlq_i2r(32, mm0);
+	paddd_r2r(mm0, mm4);
+	movd_r2m(mm4, y);
+	emms();
 #elif defined(USE_SSE2)
-    int i;
-    xmm_t *xmm_coeffs;
-    xmm_t *xmm_hist;
-
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
-
-    xmm_coeffs = (xmm_t *) fir->coeffs;
-    xmm_hist = (xmm_t *) &fir->history[fir->curr_pos];
-    i = fir->taps;
-    pxor_r2r(xmm4, xmm4);
-    /* 16 samples per iteration, so the filter must be a multiple of 16 long. */
-    while (i > 0)
-    {
-        movdqu_m2r(xmm_coeffs[0], xmm0);
-        movdqu_m2r(xmm_coeffs[1], xmm2);
-        movdqu_m2r(xmm_hist[0], xmm1);
-        movdqu_m2r(xmm_hist[1], xmm3);
-        xmm_coeffs += 2;
-        xmm_hist += 2;
-        pmaddwd_r2r(xmm1, xmm0);
-        pmaddwd_r2r(xmm3, xmm2);
-        paddd_r2r(xmm0, xmm4);
-        paddd_r2r(xmm2, xmm4);
-        i -= 16;
-    }
-    movdqa_r2r(xmm4, xmm0);
-    psrldq_i2r(8, xmm0);
-    paddd_r2r(xmm0, xmm4);
-    movdqa_r2r(xmm4, xmm0);
-    psrldq_i2r(4, xmm0);
-    paddd_r2r(xmm0, xmm4);
-    movd_r2m(xmm4, y);
+	int i;
+	xmm_t *xmm_coeffs;
+	xmm_t *xmm_hist;
+
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
+
+	xmm_coeffs = (xmm_t *) fir->coeffs;
+	xmm_hist = (xmm_t *) & fir->history[fir->curr_pos];
+	i = fir->taps;
+	pxor_r2r(xmm4, xmm4);
+	/* 16 samples per iteration, so the filter must be a multiple of 16 long. */
+	while (i > 0) {
+		movdqu_m2r(xmm_coeffs[0], xmm0);
+		movdqu_m2r(xmm_coeffs[1], xmm2);
+		movdqu_m2r(xmm_hist[0], xmm1);
+		movdqu_m2r(xmm_hist[1], xmm3);
+		xmm_coeffs += 2;
+		xmm_hist += 2;
+		pmaddwd_r2r(xmm1, xmm0);
+		pmaddwd_r2r(xmm3, xmm2);
+		paddd_r2r(xmm0, xmm4);
+		paddd_r2r(xmm2, xmm4);
+		i -= 16;
+	}
+	movdqa_r2r(xmm4, xmm0);
+	psrldq_i2r(8, xmm0);
+	paddd_r2r(xmm0, xmm4);
+	movdqa_r2r(xmm4, xmm0);
+	psrldq_i2r(4, xmm0);
+	paddd_r2r(xmm0, xmm4);
+	movd_r2m(xmm4, y);
 #elif defined(__bfin__)
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
-    y = dot_asm((int16_t*)fir->coeffs, &fir->history[fir->curr_pos], fir->taps);
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
+	y = dot_asm((int16_t *) fir->coeffs, &fir->history[fir->curr_pos],
+		    fir->taps);
 #else
-    int i;
-    int offset1;
-    int offset2;
-
-    fir->history[fir->curr_pos] = sample;
-
-    offset2 = fir->curr_pos;
-    offset1 = fir->taps - offset2;
-    y = 0;
-    for (i = fir->taps - 1;  i >= offset1;  i--)
-        y += fir->coeffs[i]*fir->history[i - offset1];
-    for (  ;  i >= 0;  i--)
-        y += fir->coeffs[i]*fir->history[i + offset2];
+	int i;
+	int offset1;
+	int offset2;
+
+	fir->history[fir->curr_pos] = sample;
+
+	offset2 = fir->curr_pos;
+	offset1 = fir->taps - offset2;
+	y = 0;
+	for (i = fir->taps - 1; i >= offset1; i--)
+		y += fir->coeffs[i] * fir->history[i - offset1];
+	for (; i >= 0; i--)
+		y += fir->coeffs[i] * fir->history[i + offset2];
 #endif
-    if (fir->curr_pos <= 0)
-    	fir->curr_pos = fir->taps;
-    fir->curr_pos--;
-    return (int16_t) (y >> 15);
+	if (fir->curr_pos <= 0)
+		fir->curr_pos = fir->taps;
+	fir->curr_pos--;
+	return (int16_t) (y >> 15);
 }
 
-static __inline__ const int16_t *fir32_create(fir32_state_t *fir,
-                                              const int32_t *coeffs,
-                                              int taps)
+static __inline__ const int16_t *fir32_create(fir32_state_t * fir,
+					      const int32_t * coeffs, int taps)
 {
-    fir->taps = taps;
-    fir->curr_pos = taps - 1;
-    fir->coeffs = coeffs;
-    fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL);
-    return fir->history;
+	fir->taps = taps;
+	fir->curr_pos = taps - 1;
+	fir->coeffs = coeffs;
+	fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL);
+	return fir->history;
 }
 
-static __inline__ void fir32_flush(fir32_state_t *fir)
+static __inline__ void fir32_flush(fir32_state_t * fir)
 {
-    memset(fir->history, 0, fir->taps*sizeof(int16_t));
+	memset(fir->history, 0, fir->taps * sizeof(int16_t));
 }
 
-static __inline__ void fir32_free(fir32_state_t *fir)
+static __inline__ void fir32_free(fir32_state_t * fir)
 {
-    kfree(fir->history);
+	kfree(fir->history);
 }
 
-static __inline__ int16_t fir32(fir32_state_t *fir, int16_t sample)
+static __inline__ int16_t fir32(fir32_state_t * fir, int16_t sample)
 {
-    int i;
-    int32_t y;
-    int offset1;
-    int offset2;
-
-    fir->history[fir->curr_pos] = sample;
-    offset2 = fir->curr_pos;
-    offset1 = fir->taps - offset2;
-    y = 0;
-    for (i = fir->taps - 1;  i >= offset1;  i--)
-        y += fir->coeffs[i]*fir->history[i - offset1];
-    for (  ;  i >= 0;  i--)
-        y += fir->coeffs[i]*fir->history[i + offset2];
-    if (fir->curr_pos <= 0)
-    	fir->curr_pos = fir->taps;
-    fir->curr_pos--;
-    return (int16_t) (y >> 15);
+	int i;
+	int32_t y;
+	int offset1;
+	int offset2;
+
+	fir->history[fir->curr_pos] = sample;
+	offset2 = fir->curr_pos;
+	offset1 = fir->taps - offset2;
+	y = 0;
+	for (i = fir->taps - 1; i >= offset1; i--)
+		y += fir->coeffs[i] * fir->history[i - offset1];
+	for (; i >= 0; i--)
+		y += fir->coeffs[i] * fir->history[i + offset2];
+	if (fir->curr_pos <= 0)
+		fir->curr_pos = fir->taps;
+	fir->curr_pos--;
+	return (int16_t) (y >> 15);
 }
 
 #endif
diff --git a/drivers/staging/echo/mmx.h b/drivers/staging/echo/mmx.h
index b5a3964865b6..35412efe61ce 100644
--- a/drivers/staging/echo/mmx.h
+++ b/drivers/staging/echo/mmx.h
@@ -27,24 +27,23 @@
  * values by ULL, lest they be truncated by the compiler)
  */
 
-typedef        union {
-        long long               q;      /* Quadword (64-bit) value */
-        unsigned long long      uq;     /* Unsigned Quadword */
-        int                     d[2];   /* 2 Doubleword (32-bit) values */
-        unsigned int            ud[2];  /* 2 Unsigned Doubleword */
-        short                   w[4];   /* 4 Word (16-bit) values */
-        unsigned short          uw[4];  /* 4 Unsigned Word */
-        char                    b[8];   /* 8 Byte (8-bit) values */
-        unsigned char           ub[8];  /* 8 Unsigned Byte */
-        float                   s[2];   /* Single-precision (32-bit) value */
-} mmx_t;        /* On an 8-byte (64-bit) boundary */
+typedef union {
+	long long q;		/* Quadword (64-bit) value */
+	unsigned long long uq;	/* Unsigned Quadword */
+	int d[2];		/* 2 Doubleword (32-bit) values */
+	unsigned int ud[2];	/* 2 Unsigned Doubleword */
+	short w[4];		/* 4 Word (16-bit) values */
+	unsigned short uw[4];	/* 4 Unsigned Word */
+	char b[8];		/* 8 Byte (8-bit) values */
+	unsigned char ub[8];	/* 8 Unsigned Byte */
+	float s[2];		/* Single-precision (32-bit) value */
+} mmx_t;			/* On an 8-byte (64-bit) boundary */
 
 /* SSE registers */
 typedef union {
 	char b[16];
 } xmm_t;
 
-
 #define         mmx_i2r(op,imm,reg) \
         __asm__ __volatile__ (#op " %0, %%" #reg \
                               : /* nothing */ \
@@ -63,7 +62,6 @@ typedef union {
 #define         mmx_r2r(op,regs,regd) \
         __asm__ __volatile__ (#op " %" #regs ", %" #regd)
 
-
 #define         emms() __asm__ __volatile__ ("emms")
 
 #define         movd_m2r(var,reg)           mmx_m2r (movd, var, reg)
@@ -192,16 +190,13 @@ typedef union {
 #define         pxor_m2r(var,reg)           mmx_m2r (pxor, var, reg)
 #define         pxor_r2r(regs,regd)         mmx_r2r (pxor, regs, regd)
 
-
 /* 3DNOW extensions */
 
 #define         pavgusb_m2r(var,reg)        mmx_m2r (pavgusb, var, reg)
 #define         pavgusb_r2r(regs,regd)      mmx_r2r (pavgusb, regs, regd)
 
-
 /* AMD MMX extensions - also available in intel SSE */
 
-
 #define         mmx_m2ri(op,mem,reg,imm) \
         __asm__ __volatile__ (#op " %1, %0, %%" #reg \
                               : /* nothing */ \
@@ -216,7 +211,6 @@ typedef union {
                               : /* nothing */ \
                               : "m" (mem))
 
-
 #define         maskmovq(regs,maskreg)      mmx_r2ri (maskmovq, regs, maskreg)
 
 #define         movntq_r2m(mmreg,var)       mmx_r2m (movntq, mmreg, var)
@@ -284,5 +278,4 @@ typedef union {
 #define         punpcklqdq_r2r(regs,regd)   mmx_r2r (punpcklqdq, regs, regd)
 #define         punpckhqdq_r2r(regs,regd)   mmx_r2r (punpckhqdq, regs, regd)
 
-
 #endif /* AVCODEC_I386MMX_H */
diff --git a/drivers/staging/echo/oslec.h b/drivers/staging/echo/oslec.h
index e41de61622db..bad852328a2f 100644
--- a/drivers/staging/echo/oslec.h
+++ b/drivers/staging/echo/oslec.h
@@ -83,4 +83,4 @@ int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx);
 */
 int16_t oslec_hpf_tx(struct oslec_state *ec, int16_t tx);
 
-#endif	/* __OSLEC_H */
+#endif /* __OSLEC_H */