selftests: bonding: add bonding prio option test

Add a test for bonding prio option. Here is the test result:

]# ./option_prio.sh
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=0)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=1)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=arp_ip_target and primary_reselect=2)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=0)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=1)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=1 monitor=miimon and primary_reselect=2)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=0)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=1)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=5 monitor=miimon and primary_reselect=2)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=0)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=1)  [ OK ]
TEST: prio_test (Test bonding option 'prio' with mode=6 monitor=miimon and primary_reselect=2)  [ OK ]

Signed-off-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 247 insertions, 1 deletions

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
index 0f3921908b07..8e3b786a748f 100644
--- a/tools/testing/selftests/drivers/net/bonding/Makefile
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -7,7 +7,8 @@ TEST_PROGS := \
 	bond-lladdr-target.sh \
 	dev_addr_lists.sh \
 	mode-1-recovery-updelay.sh \
-	mode-2-recovery-updelay.sh
+	mode-2-recovery-updelay.sh \
+	option_prio.sh
 
 TEST_FILES := \
 	lag_lib.sh \
diff --git a/tools/testing/selftests/drivers/net/bonding/option_prio.sh b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
new file mode 100755
index 000000000000..c32eebff5005
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
@@ -0,0 +1,245 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bonding option prio
+#
+
+ALL_TESTS="
+	prio_arp_ip_target_test
+	prio_miimon_test
+"
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+destroy()
+{
+	ip link del bond0 &>/dev/null
+	ip link del br0 &>/dev/null
+	ip link del veth0 &>/dev/null
+	ip link del veth1 &>/dev/null
+	ip link del veth2 &>/dev/null
+	ip netns del ns1 &>/dev/null
+	ip link del veth3 &>/dev/null
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+skip()
+{
+        local skip=1
+	ip link add name bond0 type bond mode 1 miimon 100 &>/dev/null
+	ip link add name veth0 type veth peer name veth0_p
+	ip link set veth0 master bond0
+
+	# check if iproute support prio option
+	ip link set dev veth0 type bond_slave prio 10
+	[[ $? -ne 0 ]] && skip=0
+
+	# check if bonding support prio option
+	ip -d link show veth0 | grep -q "prio 10"
+	[[ $? -ne 0 ]] && skip=0
+
+	ip link del bond0 &>/dev/null
+	ip link del veth0
+
+	return $skip
+}
+
+active_slave=""
+check_active_slave()
+{
+	local target_active_slave=$1
+	active_slave="$(cat /sys/class/net/bond0/bonding/active_slave)"
+	test "$active_slave" = "$target_active_slave"
+	check_err $? "Current active slave is $active_slave but not $target_active_slave"
+}
+
+
+# Test bonding prio option with mode=$mode monitor=$monitor
+# and primary_reselect=$primary_reselect
+prio_test()
+{
+	RET=0
+
+	local monitor=$1
+	local mode=$2
+	local primary_reselect=$3
+
+	local bond_ip4="192.169.1.2"
+	local peer_ip4="192.169.1.1"
+	local bond_ip6="2009:0a:0b::02"
+	local peer_ip6="2009:0a:0b::01"
+
+
+	# create veths
+	ip link add name veth0 type veth peer name veth0_p
+	ip link add name veth1 type veth peer name veth1_p
+	ip link add name veth2 type veth peer name veth2_p
+
+	# create bond
+	if [[ "$monitor" == "miimon" ]];then
+		ip link add name bond0 type bond mode $mode miimon 100 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "arp_ip_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 arp_ip_target $peer_ip4 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "ns_ip6_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 ns_ip6_target $peer_ip6 primary veth1 primary_reselect $primary_reselect
+	fi
+	ip link set bond0 up
+	ip link set veth0 master bond0
+	ip link set veth1 master bond0
+	ip link set veth2 master bond0
+	# check bonding member prio value
+	ip link set dev veth0 type bond_slave prio 0
+	ip link set dev veth1 type bond_slave prio 10
+	ip link set dev veth2 type bond_slave prio 11
+	ip -d link show veth0 | grep -q 'prio 0'
+	check_err $? "veth0 prio is not 0"
+	ip -d link show veth1 | grep -q 'prio 10'
+	check_err $? "veth0 prio is not 10"
+	ip -d link show veth2 | grep -q 'prio 11'
+	check_err $? "veth0 prio is not 11"
+
+	ip link set veth0 up
+	ip link set veth1 up
+	ip link set veth2 up
+	ip link set veth0_p up
+	ip link set veth1_p up
+	ip link set veth2_p up
+
+	# prepare ping target
+	ip link add name br0 type bridge
+	ip link set br0 up
+	ip link set veth0_p master br0
+	ip link set veth1_p master br0
+	ip link set veth2_p master br0
+	ip link add name veth3 type veth peer name veth3_p
+	ip netns add ns1
+	ip link set veth3_p master br0 up
+	ip link set veth3 netns ns1 up
+	ip netns exec ns1 ip addr add $peer_ip4/24 dev veth3
+	ip netns exec ns1 ip addr add $peer_ip6/64 dev veth3
+	ip addr add $bond_ip4/24 dev bond0
+	ip addr add $bond_ip6/64 dev bond0
+	sleep 5
+
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 1."
+	ping6 $peer_ip6 -c5 -I bond0 &>/dev/null
+	check_err $? "ping6 failed 1."
+
+	# active salve should be the primary slave
+	check_active_slave veth1
+
+	# active slave should be the higher prio slave
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 2."
+	check_active_slave veth2
+
+	# when only 1 slave is up
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 3."
+	check_active_slave veth0
+
+	# when a higher prio slave change to up
+	ip link set veth2 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 4."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth2"
+			;;
+		"1")
+			check_active_slave "veth0"
+			;;
+		"2")
+			check_active_slave "veth0"
+			;;
+	esac
+	local pre_active_slave=$active_slave
+
+	# when the primary slave change to up
+	ip link set veth1 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 5."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth1"
+			;;
+		"1")
+			check_active_slave "$pre_active_slave"
+			;;
+		"2")
+			check_active_slave "$pre_active_slave"
+			ip link set $active_slave down
+			ping $peer_ip4 -c5 -I bond0 &>/dev/null
+			check_err $? "ping failed 6."
+			check_active_slave "veth1"
+			;;
+	esac
+
+	# Test changing bond salve prio
+	if [[ "$primary_reselect" == "0" ]];then
+		ip link set dev veth0 type bond_slave prio 1000000
+		ip link set dev veth1 type bond_slave prio 0
+		ip link set dev veth2 type bond_slave prio -50
+		ip -d link show veth0 | grep -q 'prio 1000000'
+		check_err $? "veth0 prio is not 1000000"
+		ip -d link show veth1 | grep -q 'prio 0'
+		check_err $? "veth1 prio is not 0"
+		ip -d link show veth2 | grep -q 'prio -50'
+		check_err $? "veth3 prio is not -50"
+		check_active_slave "veth1"
+
+		ip link set $active_slave down
+		ping $peer_ip4 -c5 -I bond0 &>/dev/null
+		check_err $? "ping failed 7."
+		check_active_slave "veth0"
+	fi
+
+	cleanup
+
+	log_test "prio_test" "Test bonding option 'prio' with mode=$mode monitor=$monitor and primary_reselect=$primary_reselect"
+}
+
+prio_miimon_test()
+{
+	local mode
+	local primary_reselect
+
+	for mode in 1 5 6; do
+		for primary_reselect in 0 1 2; do
+			prio_test "miimon" $mode $primary_reselect
+		done
+	done
+}
+
+prio_arp_ip_target_test()
+{
+	local primary_reselect
+
+	for primary_reselect in 0 1 2; do
+		prio_test "arp_ip_target" 1 $primary_reselect
+	done
+}
+
+if skip;then
+	log_test_skip "option_prio.sh" "Current iproute doesn't support 'prio'."
+	exit 0
+fi
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"