V4L/DVB (11744): pvrusb2: Select, track, and report IR scheme in use with the device

This change defines all possible "IR schemes" related to the pvrusb2
driver, on a per-device basis.  That information is then set according
to the hardware in use.  The idea here is to make possible a more
intelligent future decision on which, if any, IR receiver driver might
be loaded during initialization.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

5 files changed, 38 insertions, 18 deletions

diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 76d42d92e603..a0688c005b84 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -71,6 +71,7 @@ static const struct pvr2_device_desc pvr2_device_29xxx = {
 		.flag_has_svideo = !0,
 		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_29XXX,
 };
 
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index 3e553389cbc3..73e0e0ba0044 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -78,8 +78,10 @@ struct pvr2_string_table {
 #define PVR2_LED_SCHEME_HAUPPAUGE 1
 
 #define PVR2_IR_SCHEME_NONE 0
-#define PVR2_IR_SCHEME_24XXX 1
-#define PVR2_IR_SCHEME_ZILOG 2
+#define PVR2_IR_SCHEME_24XXX 1 /* FX2-controlled IR */
+#define PVR2_IR_SCHEME_ZILOG 2 /* HVR-1950 style (must be taken out of reset) */
+#define PVR2_IR_SCHEME_24XXX_MCE 3 /* 24xxx MCE device */
+#define PVR2_IR_SCHEME_29XXX 4 /* Original 29xxx device */
 
 /* This describes a particular hardware type (except for the USB device ID
    which must live in a separate structure due to environmental
@@ -162,19 +164,9 @@ struct pvr2_device_desc {
 	   ensure that it is found. */
 	unsigned int flag_has_wm8775:1;
 
-	/* Indicate any specialized IR scheme that might need to be
-	   supported by this driver.  If not set, then it is assumed that
-	   IR can work without help from the driver (which is frequently
-	   the case).  This is otherwise set to one of
-	   PVR2_IR_SCHEME_xxxx.  For "xxxx", the value "24XXX" indicates a
-	   Hauppauge 24xxx class device which has an FPGA-hosted IR
-	   receiver that can only be reached via FX2 command codes.  In
-	   that case the pvrusb2 driver will emulate the behavior of the
-	   older 29xxx device's IR receiver (a "virtual" I2C chip) in terms
-	   of those command codes.  For the value "ZILOG", we're dealing
-	   with an IR chip that must be taken out of reset via another FX2
-	   command code (which is the case for HVR-1950 devices). */
-	unsigned int ir_scheme:2;
+	/* Indicate IR scheme of hardware.  If not set, then it is assumed
+	   that IR can work without any help from the driver. */
+	unsigned int ir_scheme:3;
 
 	/* These bits define which kinds of sources the device can handle.
 	   Note: Digital tuner presence is inferred by the
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index 5d75eb5211b1..5b152ff20bd0 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -200,6 +200,9 @@ struct pvr2_hdw {
 	int i2c_cx25840_hack_state;
 	int i2c_linked;
 
+	/* IR related */
+	unsigned int ir_scheme_active; /* IR scheme as seen from the outside */
+
 	/* Frequency table */
 	unsigned int freqTable[FREQTABLE_SIZE];
 	unsigned int freqProgSlot;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index add3395d3248..686df1afbbaf 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -142,6 +142,15 @@ static const unsigned char *module_i2c_addresses[] = {
 };
 
 
+static const char *ir_scheme_names[] = {
+	[PVR2_IR_SCHEME_NONE] = "none",
+	[PVR2_IR_SCHEME_29XXX] = "29xxx",
+	[PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)",
+	[PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)",
+	[PVR2_IR_SCHEME_ZILOG] = "Zilog",
+};
+
+
 /* Define the list of additional controls we'll dynamically construct based
    on query of the cx2341x module. */
 struct pvr2_mpeg_ids {
@@ -2170,7 +2179,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 	}
 
 	/* Take the IR chip out of reset, if appropriate */
-	if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_ZILOG) {
+	if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) {
 		pvr2_issue_simple_cmd(hdw,
 				      FX2CMD_HCW_ZILOG_RESET |
 				      (1 << 8) |
@@ -2451,6 +2460,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
 				GFP_KERNEL);
 	if (!hdw->controls) goto fail;
 	hdw->hdw_desc = hdw_desc;
+	hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme;
 	for (idx = 0; idx < hdw->control_cnt; idx++) {
 		cptr = hdw->controls + idx;
 		cptr->hdw = hdw;
@@ -4809,6 +4819,12 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
 			stats.buffers_processed,
 			stats.buffers_failed);
 	}
+	case 6: {
+		unsigned int id = hdw->ir_scheme_active;
+		return scnprintf(buf, acnt, "ir scheme: id=%d %s", id,
+				 (id >= ARRAY_SIZE(ir_scheme_names) ?
+				  "?" : ir_scheme_names[id]));
+	}
 	default: break;
 	}
 	return 0;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 9af282f9e765..838d01c9d02e 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -574,7 +574,9 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 		printk(KERN_INFO "%s: IR disabled\n",hdw->name);
 		hdw->i2c_func[0x18] = i2c_black_hole;
 	} else if (ir_mode[hdw->unit_number] == 1) {
-		if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) {
+		if (hdw->ir_scheme_active == PVR2_IR_SCHEME_24XXX) {
+			/* Set up translation so that our IR looks like a
+			   29xxx device */
 			hdw->i2c_func[0x18] = i2c_24xxx_ir;
 		}
 	}
@@ -597,12 +599,18 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 	i2c_add_adapter(&hdw->i2c_adap);
 	if (hdw->i2c_func[0x18] == i2c_24xxx_ir) {
 		/* Probe for a different type of IR receiver on this
-		   device.  If present, disable the emulated IR receiver. */
+		   device.  This is really the only way to differentiate
+		   older 24xxx devices from 24xxx variants that include an
+		   IR blaster.  If the IR blaster is present, the IR
+		   receiver is part of that chip and thus we must disable
+		   the emulated IR receiver. */
 		if (do_i2c_probe(hdw, 0x71)) {
 			pvr2_trace(PVR2_TRACE_INFO,
 				   "Device has newer IR hardware;"
 				   " disabling unneeded virtual IR device");
 			hdw->i2c_func[0x18] = NULL;
+			/* Remember that this is a different device... */
+			hdw->ir_scheme_active = PVR2_IR_SCHEME_24XXX_MCE;
 		}
 	}
 	if (i2c_scan) do_i2c_scan(hdw);