Merge branch 'net-phy-marvell-88q2xxx-add-driver-for-the-marvell-88q2220-phy'

Dimitri Fedrau says:

====================
net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
====================

Link: https://lore.kernel.org/r/20240218075753.18067-1-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

6 files changed, 625 insertions, 30 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index e261e58bf158..1df0595c5ba9 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -232,6 +232,7 @@ config MARVELL_10G_PHY
 
 config MARVELL_88Q2XXX_PHY
 	tristate "Marvell 88Q2XXX PHY"
+	depends on HWMON || HWMON=n
 	help
 	  Support for the Marvell 88Q2XXX 100/1000BASE-T1 Automotive Ethernet
 	  PHYs.
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 1c3ff77de56b..6b4bd9883304 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -1,10 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell 88Q2XXX automotive 100BASE-T1/1000BASE-T1 PHY driver
+ *
+ * Derived from Marvell Q222x API
+ *
+ * Copyright (C) 2024 Liebherr-Electronics and Drives GmbH
  */
 #include <linux/ethtool_netlink.h>
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
+#include <linux/hwmon.h>
+
+#define PHY_ID_88Q2220_REVB0	(MARVELL_PHY_ID_88Q2220 | 0x1)
 
 #define MDIO_MMD_AN_MV_STAT			32769
 #define MDIO_MMD_AN_MV_STAT_ANEG		0x0100
@@ -13,8 +20,38 @@
 #define MDIO_MMD_AN_MV_STAT_LOCAL_MASTER	0x4000
 #define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT	0x8000
 
+#define MDIO_MMD_AN_MV_STAT2			32794
+#define MDIO_MMD_AN_MV_STAT2_AN_RESOLVED	0x0800
+#define MDIO_MMD_AN_MV_STAT2_100BT1		0x2000
+#define MDIO_MMD_AN_MV_STAT2_1000BT1		0x4000
+
+#define MDIO_MMD_PCS_MV_INT_EN			32784
+#define MDIO_MMD_PCS_MV_INT_EN_LINK_UP		0x0040
+#define MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN	0x0080
+#define MDIO_MMD_PCS_MV_INT_EN_100BT1		0x1000
+
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT			32785
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_UP		0x0040
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_DOWN		0x0080
+#define MDIO_MMD_PCS_MV_GPIO_INT_STAT_100BT1_GEN	0x1000
+
+#define MDIO_MMD_PCS_MV_GPIO_INT_CTRL			32787
+#define MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS		0x0800
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1			32833
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_RAW_INT		0x0001
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT		0x0040
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT_EN		0x0080
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR2			32834
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK		0xc000
+
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3			32835
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK	0xff00
+#define MDIO_MMD_PCS_MV_TEMP_SENSOR3_MASK		0x00ff
+
 #define MDIO_MMD_PCS_MV_100BT1_STAT1			33032
-#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR	0x00FF
+#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR		0x00ff
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_JABBER		0x0100
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_LINK		0x0200
 #define MDIO_MMD_PCS_MV_100BT1_STAT1_LOCAL_RX		0x1000
@@ -27,6 +64,71 @@
 #define MDIO_MMD_PCS_MV_100BT1_STAT2_LINK	0x0004
 #define MDIO_MMD_PCS_MV_100BT1_STAT2_ANGE	0x0008
 
+#define MDIO_MMD_PCS_MV_100BT1_INT_EN			33042
+#define MDIO_MMD_PCS_MV_100BT1_INT_EN_LINKEVENT		0x0400
+
+#define MDIO_MMD_PCS_MV_COPPER_INT_STAT			33043
+#define MDIO_MMD_PCS_MV_COPPER_INT_STAT_LINKEVENT	0x0400
+
+#define MDIO_MMD_PCS_MV_RX_STAT			33328
+
+#define MDIO_MMD_PCS_MV_TDR_RESET			65226
+#define MDIO_MMD_PCS_MV_TDR_RESET_TDR_RST		0x1000
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_SHORT_CABLE		65241
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_LONG_CABLE		65242
+
+#define MDIO_MMD_PCS_MV_TDR_STATUS			65245
+#define MDIO_MMD_PCS_MV_TDR_STATUS_MASK			0x0003
+#define MDIO_MMD_PCS_MV_TDR_STATUS_OFF			0x0001
+#define MDIO_MMD_PCS_MV_TDR_STATUS_ON			0x0002
+#define MDIO_MMD_PCS_MV_TDR_STATUS_DIST_MASK		0xff00
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_MASK	0x00f0
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_SHORT	0x0030
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OPEN	0x00e0
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OK		0x0070
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_IN_PROGR	0x0080
+#define MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_NOISE	0x0050
+
+#define MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF			65246
+
+struct mmd_val {
+	int devad;
+	u32 regnum;
+	u16 val;
+};
+
+static const struct mmd_val mv88q222x_revb0_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0x8033, 0x6801 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1,
+	  MDIO_CTRL1_LPOWER | MDIO_PMA_CTRL1_SPEED1000 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x48 },
+	{ MDIO_MMD_PCS, 0xffe4, 0x6b6 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0 },
+	{ MDIO_MMD_PCS, MDIO_CTRL1, 0x0 },
+};
+
+static const struct mmd_val mv88q222x_revb0_init_seq1[] = {
+	{ MDIO_MMD_PCS, 0xfe79, 0x0 },
+	{ MDIO_MMD_PCS, 0xfe07, 0x125a },
+	{ MDIO_MMD_PCS, 0xfe09, 0x1288 },
+	{ MDIO_MMD_PCS, 0xfe08, 0x2588 },
+	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
+	{ MDIO_MMD_PCS, 0xfe72, 0x042c },
+	{ MDIO_MMD_PCS, 0xfbba, 0xcb2 },
+	{ MDIO_MMD_PCS, 0xfbbb, 0xc4a },
+	{ MDIO_MMD_AN, 0x8032, 0x2020 },
+	{ MDIO_MMD_AN, 0x8031, 0xa28 },
+	{ MDIO_MMD_AN, 0x8031, 0xc28 },
+	{ MDIO_MMD_PCS, 0xffdb, 0xfc10 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x58 },
+	{ MDIO_MMD_PCS, 0xfe79, 0x4 },
+	{ MDIO_MMD_PCS, 0xfe5f, 0xe8 },
+	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
+};
+
 static int mv88q2xxx_soft_reset(struct phy_device *phydev)
 {
 	int ret;
@@ -50,20 +152,23 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
 
 	/* Read vendor specific Auto-Negotiation status register to get local
 	 * and remote receiver status according to software initialization
-	 * guide.
+	 * guide. However, when not in polling mode the local and remote
+	 * receiver status are not evaluated due to the Marvell 88Q2xxx APIs.
 	 */
 	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT);
 	if (ret < 0) {
 		return ret;
-	} else if ((ret & MDIO_MMD_AN_MV_STAT_LOCAL_RX) &&
-		   (ret & MDIO_MMD_AN_MV_STAT_REMOTE_RX)) {
+	} else if (((ret & MDIO_MMD_AN_MV_STAT_LOCAL_RX) &&
+		   (ret & MDIO_MMD_AN_MV_STAT_REMOTE_RX)) ||
+		   !phy_polling_mode(phydev)) {
 		/* The link state is latched low so that momentary link
 		 * drops can be detected. Do not double-read the status
 		 * in polling mode to detect such short link drops except
 		 * the link was already down.
 		 */
 		if (!phy_polling_mode(phydev) || !phydev->link) {
-			ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+			ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+					   MDIO_PCS_1000BT1_STAT);
 			if (ret < 0)
 				return ret;
 			else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -71,7 +176,8 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
 		}
 
 		if (!link) {
-			ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+			ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+					   MDIO_PCS_1000BT1_STAT);
 			if (ret < 0)
 				return ret;
 			else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -94,8 +200,20 @@ static int mv88q2xxx_read_link_100m(struct phy_device *phydev)
 	 * the link was already down. In case we are not polling,
 	 * we always read the realtime status.
 	 */
-	if (!phy_polling_mode(phydev) || !phydev->link) {
-		ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_100BT1_STAT1);
+	if (!phy_polling_mode(phydev)) {
+		phydev->link = false;
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_100BT1_STAT2);
+		if (ret < 0)
+			return ret;
+
+		if (ret & MDIO_MMD_PCS_MV_100BT1_STAT2_LINK)
+			phydev->link = true;
+
+		return 0;
+	} else if (!phydev->link) {
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_100BT1_STAT1);
 		if (ret < 0)
 			return ret;
 		else if (ret & MDIO_MMD_PCS_MV_100BT1_STAT1_LINK)
@@ -120,24 +238,90 @@ out:
 
 static int mv88q2xxx_read_link(struct phy_device *phydev)
 {
-	int ret;
-
 	/* The 88Q2XXX PHYs do not have the PMA/PMD status register available,
 	 * therefore we need to read the link status from the vendor specific
 	 * registers depending on the speed.
 	 */
+
 	if (phydev->speed == SPEED_1000)
-		ret = mv88q2xxx_read_link_gbit(phydev);
+		return mv88q2xxx_read_link_gbit(phydev);
+	else if (phydev->speed == SPEED_100)
+		return mv88q2xxx_read_link_100m(phydev);
+
+	phydev->link = false;
+	return 0;
+}
+
+static int mv88q2xxx_read_master_slave_state(struct phy_device *phydev)
+{
+	int ret;
+
+	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_MMD_AN_MV_STAT_LOCAL_MASTER)
+		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
 	else
-		ret = mv88q2xxx_read_link_100m(phydev);
+		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+	return 0;
+}
+
+static int mv88q2xxx_read_aneg_speed(struct phy_device *phydev)
+{
+	int ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT2);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & MDIO_MMD_AN_MV_STAT2_AN_RESOLVED))
+		return 0;
 
-	return ret;
+	if (ret & MDIO_MMD_AN_MV_STAT2_100BT1)
+		phydev->speed = SPEED_100;
+	else if (ret & MDIO_MMD_AN_MV_STAT2_1000BT1)
+		phydev->speed = SPEED_1000;
+
+	return 0;
 }
 
 static int mv88q2xxx_read_status(struct phy_device *phydev)
 {
 	int ret;
 
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		/* We have to get the negotiated speed first, otherwise we are
+		 * not able to read the link.
+		 */
+		ret = mv88q2xxx_read_aneg_speed(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = mv88q2xxx_read_link(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = genphy_c45_baset1_read_status(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = mv88q2xxx_read_master_slave_state(phydev);
+		if (ret < 0)
+			return ret;
+
+		phy_resolve_aneg_linkmode(phydev);
+
+		return 0;
+	}
+
 	ret = mv88q2xxx_read_link(phydev);
 	if (ret < 0)
 		return ret;
@@ -166,7 +350,9 @@ static int mv88q2xxx_get_features(struct phy_device *phydev)
 	 * sequence provided by Marvell. Disable it for now until a proper
 	 * workaround is found or a new PHY revision is released.
 	 */
-	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+	if (phydev->drv->phy_id == MARVELL_PHY_ID_88Q2110)
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->supported);
 
 	return 0;
 }
@@ -179,28 +365,29 @@ static int mv88q2xxx_config_aneg(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return mv88q2xxx_soft_reset(phydev);
+	return phydev->drv->soft_reset(phydev);
 }
 
 static int mv88q2xxx_config_init(struct phy_device *phydev)
 {
-	int ret;
-
 	/* The 88Q2XXX PHYs do have the extended ability register available, but
 	 * register MDIO_PMA_EXTABLE where they should signalize it does not
 	 * work according to specification. Therefore, we force it here.
 	 */
 	phydev->pma_extable = MDIO_PMA_EXTABLE_BT1;
 
-	/* Read the current PHY configuration */
-	ret = genphy_c45_read_pma(phydev);
-	if (ret)
-		return ret;
+	/* Configure interrupt with default settings, output is driven low for
+	 * active interrupt and high for inactive.
+	 */
+	if (phy_interrupt_is_valid(phydev))
+		return phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS);
 
-	return mv88q2xxx_config_aneg(phydev);
+	return 0;
 }
 
-static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi(struct phy_device *phydev)
 {
 	int ret;
 
@@ -208,7 +395,8 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 		/* Read the SQI from the vendor specific receiver status
 		 * register
 		 */
-		ret = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x8230);
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_RX_STAT);
 		if (ret < 0)
 			return ret;
 
@@ -218,7 +406,7 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 		 * but can be found in the Software Initialization Guide. Only
 		 * revisions >= A0 are supported.
 		 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xFC5D, 0x00FF, 0x00AC);
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xfc5d, 0xff, 0xac);
 		if (ret < 0)
 			return ret;
 
@@ -227,14 +415,386 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
 			return ret;
 	}
 
-	return ret & 0x0F;
+	return ret & 0x0f;
 }
 
-static int mv88q2xxxx_get_sqi_max(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi_max(struct phy_device *phydev)
 {
 	return 15;
 }
 
+static int mv88q2xxx_config_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Enable interrupts for 1000BASE-T1 link up and down events
+		 * and enable general interrupts for 100BASE-T1.
+		 */
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+				    MDIO_MMD_PCS_MV_INT_EN,
+				    MDIO_MMD_PCS_MV_INT_EN_LINK_UP |
+				    MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN |
+				    MDIO_MMD_PCS_MV_INT_EN_100BT1);
+		if (ret < 0)
+			return ret;
+
+		/* Enable interrupts for 100BASE-T1 link events */
+		return phy_write_mmd(phydev, MDIO_MMD_PCS,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN_LINKEVENT);
+	} else {
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+				    MDIO_MMD_PCS_MV_INT_EN, 0);
+		if (ret < 0)
+			return ret;
+
+		return phy_write_mmd(phydev, MDIO_MMD_PCS,
+				     MDIO_MMD_PCS_MV_100BT1_INT_EN, 0);
+	}
+}
+
+static irqreturn_t mv88q2xxx_handle_interrupt(struct phy_device *phydev)
+{
+	bool trigger_machine = false;
+	int irq;
+
+	/* Before we can acknowledge the 100BT1 general interrupt, that is in
+	 * the 1000BT1 interrupt status register, we have to acknowledge any
+	 * interrupts that are related to it. Therefore we read first the 100BT1
+	 * interrupt status register, followed by reading the 1000BT1 interrupt
+	 * status register.
+	 */
+
+	irq = phy_read_mmd(phydev, MDIO_MMD_PCS,
+			   MDIO_MMD_PCS_MV_COPPER_INT_STAT);
+	if (irq < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Check link status for 100BT1 */
+	if (irq & MDIO_MMD_PCS_MV_COPPER_INT_STAT_LINKEVENT)
+		trigger_machine = true;
+
+	irq = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_GPIO_INT_STAT);
+	if (irq < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Check link status for 1000BT1 */
+	if ((irq & MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_UP) ||
+	    (irq & MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_DOWN))
+		trigger_machine = true;
+
+	if (!trigger_machine)
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int mv88q2xxx_suspend(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Disable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_DISABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				MDIO_CTRL1_LPOWER);
+}
+
+static int mv88q2xxx_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				  MDIO_CTRL1_LPOWER);
+}
+
+#if IS_ENABLED(CONFIG_HWMON)
+static const struct hwmon_channel_info * const mv88q2xxx_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_ALARM),
+	NULL
+};
+
+static umode_t mv88q2xxx_hwmon_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	case hwmon_temp_max:
+		return 0644;
+	case hwmon_temp_alarm:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int mv88q2xxx_hwmon_read(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, long *val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+	int ret;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR3);
+		if (ret < 0)
+			return ret;
+
+		ret = FIELD_GET(MDIO_MMD_PCS_MV_TEMP_SENSOR3_MASK, ret);
+		*val = (ret - 75) * 1000;
+		return 0;
+	case hwmon_temp_max:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR3);
+		if (ret < 0)
+			return ret;
+
+		ret = FIELD_GET(MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				ret);
+		*val = (ret - 75) * 1000;
+		return 0;
+	case hwmon_temp_alarm:
+		ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+				   MDIO_MMD_PCS_MV_TEMP_SENSOR1);
+		if (ret < 0)
+			return ret;
+
+		*val = !!(ret & MDIO_MMD_PCS_MV_TEMP_SENSOR1_RAW_INT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int mv88q2xxx_hwmon_write(struct device *dev,
+				 enum hwmon_sensor_types type, u32 attr,
+				 int channel, long val)
+{
+	struct phy_device *phydev = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_temp_max:
+		clamp_val(val, -75000, 180000);
+		val = (val / 1000) + 75;
+		val = FIELD_PREP(MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				 val);
+		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				      MDIO_MMD_PCS_MV_TEMP_SENSOR3,
+				      MDIO_MMD_PCS_MV_TEMP_SENSOR3_INT_THRESH_MASK,
+				      val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops mv88q2xxx_hwmon_hwmon_ops = {
+	.is_visible = mv88q2xxx_hwmon_is_visible,
+	.read = mv88q2xxx_hwmon_read,
+	.write = mv88q2xxx_hwmon_write,
+};
+
+static const struct hwmon_chip_info mv88q2xxx_hwmon_chip_info = {
+	.ops = &mv88q2xxx_hwmon_hwmon_ops,
+	.info = mv88q2xxx_hwmon_info,
+};
+
+static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device *hwmon;
+	char *hwmon_name;
+	int ret;
+
+	/* Enable temperature sense */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2,
+			     MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
+	if (IS_ERR(hwmon_name))
+		return PTR_ERR(hwmon_name);
+
+	hwmon = devm_hwmon_device_register_with_info(dev,
+						     hwmon_name,
+						     phydev,
+						     &mv88q2xxx_hwmon_chip_info,
+						     NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon);
+}
+
+#else
+static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif
+
+static int mv88q2xxx_probe(struct phy_device *phydev)
+{
+	return mv88q2xxx_hwmon_probe(phydev);
+}
+
+static int mv88q222x_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable RESET of DCL */
+	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000) {
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x48);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_CTRL,
+			    MDIO_PCS_1000BT1_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xffe4, 0xc);
+	if (ret < 0)
+		return ret;
+
+	/* Disable RESET of DCL */
+	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000)
+		return phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x58);
+
+	return 0;
+}
+
+static int mv88q222x_revb0_config_init(struct phy_device *phydev)
+{
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq0); i++) {
+		ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq0[i].devad,
+				    mv88q222x_revb0_init_seq0[i].regnum,
+				    mv88q222x_revb0_init_seq0[i].val);
+		if (ret < 0)
+			return ret;
+	}
+
+	usleep_range(5000, 10000);
+
+	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq1); i++) {
+		ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq1[i].devad,
+				    mv88q222x_revb0_init_seq1[i].regnum,
+				    mv88q222x_revb0_init_seq1[i].val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return mv88q2xxx_config_init(phydev);
+}
+
+static int mv88q222x_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF, 0x0058);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_LONG_CABLE, 0x00eb);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			    MDIO_MMD_PCS_MV_TDR_OFF_SHORT_CABLE, 0x010e);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_RESET,
+			    0x0d90);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_STATUS,
+			    MDIO_MMD_PCS_MV_TDR_STATUS_ON);
+	if (ret < 0)
+		return ret;
+
+	/* According to the Marvell API the test is finished within 500 ms */
+	msleep(500);
+
+	return 0;
+}
+
+static int mv88q222x_cable_test_get_status(struct phy_device *phydev,
+					   bool *finished)
+{
+	int ret, status;
+	u32 dist;
+
+	status = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_STATUS);
+	if (status < 0)
+		return status;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TDR_RESET,
+			    MDIO_MMD_PCS_MV_TDR_RESET_TDR_RST | 0xd90);
+	if (ret < 0)
+		return ret;
+
+	/* Test could not be finished */
+	if (FIELD_GET(MDIO_MMD_PCS_MV_TDR_STATUS_MASK, status) !=
+	    MDIO_MMD_PCS_MV_TDR_STATUS_OFF)
+		return -ETIMEDOUT;
+
+	*finished = true;
+	/* Fault length reported in meters, convert to centimeters */
+	dist = FIELD_GET(MDIO_MMD_PCS_MV_TDR_STATUS_DIST_MASK, status) * 100;
+	switch (status & MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_MASK) {
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OPEN:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_OPEN);
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					      dist);
+		break;
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_SHORT:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT);
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					      dist);
+		break;
+	case MDIO_MMD_PCS_MV_TDR_STATUS_VCT_STAT_OK:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_OK);
+		break;
+	default:
+		ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+					ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC);
+	}
+
+	return 0;
+}
+
 static struct phy_driver mv88q2xxx_driver[] = {
 	{
 		.phy_id			= MARVELL_PHY_ID_88Q2110,
@@ -246,8 +806,29 @@ static struct phy_driver mv88q2xxx_driver[] = {
 		.read_status		= mv88q2xxx_read_status,
 		.soft_reset		= mv88q2xxx_soft_reset,
 		.set_loopback		= genphy_c45_loopback,
-		.get_sqi		= mv88q2xxxx_get_sqi,
-		.get_sqi_max		= mv88q2xxxx_get_sqi_max,
+		.get_sqi		= mv88q2xxx_get_sqi,
+		.get_sqi_max		= mv88q2xxx_get_sqi_max,
+	},
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0),
+		.name			= "mv88q2220",
+		.flags			= PHY_POLL_CABLE_TEST,
+		.probe			= mv88q2xxx_probe,
+		.get_features		= mv88q2xxx_get_features,
+		.config_aneg		= mv88q2xxx_config_aneg,
+		.aneg_done		= genphy_c45_aneg_done,
+		.config_init		= mv88q222x_revb0_config_init,
+		.read_status		= mv88q2xxx_read_status,
+		.soft_reset		= mv88q222x_soft_reset,
+		.config_intr		= mv88q2xxx_config_intr,
+		.handle_interrupt	= mv88q2xxx_handle_interrupt,
+		.set_loopback		= genphy_c45_loopback,
+		.cable_test_start	= mv88q222x_cable_test_start,
+		.cable_test_get_status	= mv88q222x_cable_test_get_status,
+		.get_sqi		= mv88q2xxx_get_sqi,
+		.get_sqi_max		= mv88q2xxx_get_sqi_max,
+		.suspend		= mv88q2xxx_suspend,
+		.resume			= mv88q2xxx_resume,
 	},
 };
 
@@ -255,6 +836,7 @@ module_phy_driver(mv88q2xxx_driver);
 
 static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = {
 	{ MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), },
 	{ /*sentinel*/ }
 };
 MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl);
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index c69568e7695e..fa5145c9328e 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -208,7 +208,8 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
 
 	adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP |
 		MDIO_AN_T1_ADV_L_PAUSE_ASYM;
-	adv_m_mask = MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
+	adv_m_mask = MDIO_AN_T1_ADV_M_1000BT1 | MDIO_AN_T1_ADV_M_100BT1 |
+		MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
 
 	switch (phydev->master_slave_set) {
 	case MASTER_SLAVE_CFG_MASTER_FORCE:
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 9b54c4f0677f..693eba9869e4 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -26,6 +26,7 @@
 #define MARVELL_PHY_ID_88E2110		0x002b09b0
 #define MARVELL_PHY_ID_88X2222		0x01410f10
 #define MARVELL_PHY_ID_88Q2110		0x002b0980
+#define MARVELL_PHY_ID_88Q2220		0x002b0b20
 
 /* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
 #define MARVELL_PHY_ID_88E1111_FINISAR	0x01ff0cc0
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index fd8ff310f9eb..68f8d2e970d4 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -373,6 +373,10 @@ static inline void mii_t1_adv_m_mod_linkmode_t(unsigned long *advertising, u32 l
 {
 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			 advertising, lpa & MDIO_AN_T1_ADV_M_B10L);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
+			 advertising, lpa & MDIO_AN_T1_ADV_M_100BT1);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT,
+			 advertising, lpa & MDIO_AN_T1_ADV_M_1000BT1);
 }
 
 /**
@@ -409,6 +413,10 @@ static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising)
 
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising))
 		result |= MDIO_AN_T1_ADV_M_B10L;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, advertising))
+		result |= MDIO_AN_T1_ADV_M_100BT1;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, advertising))
+		result |= MDIO_AN_T1_ADV_M_1000BT1;
 
 	return result;
 }
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index 3c9097502403..c0c8ec995b06 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -350,6 +350,8 @@
 
 /* BASE-T1 auto-negotiation advertisement register [31:16] */
 #define MDIO_AN_T1_ADV_M_B10L		0x4000	/* device is compatible with 10BASE-T1L */
+#define MDIO_AN_T1_ADV_M_1000BT1	0x0080	/* advertise 1000BASE-T1 */
+#define MDIO_AN_T1_ADV_M_100BT1		0x0020	/* advertise 100BASE-T1 */
 #define MDIO_AN_T1_ADV_M_MST		0x0010	/* advertise master preference */
 
 /* BASE-T1 auto-negotiation advertisement register [47:32] */