diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:42:18 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:42:18 -0800 |
| commit | 02f9fc286e039d0bef7284fb1200ee755b525bde (patch) | |
| tree | 2ce396501ee2590ca7e37c3ea6f058d164b41474 | |
| parent | 5d99aa093b566d234b51b7822c67059e2bd3ed8d (diff) | |
| parent | a9a939cb34dfffb9f43b988a681d2566ca157b74 (diff) | |
Merge tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new power capping facility allowing aggregate power
constraints to be applied to sets of devices in a distributed manner,
add a new CPU ID to the RAPL power capping driver and improve it, drop
a cpufreq driver belonging to a platform that is not supported any
more, drop two redundant cpufreq driver flags, update cpufreq drivers
(intel_pstate, brcmstb-avs, qcom-hw), update the operating performance
points (OPP) framework (code cleanups, new helpers, devfreq-related
modifications), clean up devfreq, extend the PM clock layer, update
the cpupower utility and make assorted janitorial changes.
Specifics:
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping driver
and make it use the topology interface when laying out the system
topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep and
PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and drop
DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and
clean up the code to remove many of the family checks to make
future family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba)"
* tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
MAINTAINERS: cpuidle: exynos: include header in file pattern
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
PM: sleep: Constify static struct attribute_group
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
cpufreq: Remove CPUFREQ_STICKY flag
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
...
70 files changed, 2532 insertions, 640 deletions
diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst index ced8a8007434..a0f5244fb427 100644 --- a/Documentation/power/index.rst +++ b/Documentation/power/index.rst @@ -30,6 +30,7 @@ Power Management userland-swsusp powercap/powercap + powercap/dtpm regulator/consumer regulator/design diff --git a/Documentation/power/powercap/dtpm.rst b/Documentation/power/powercap/dtpm.rst new file mode 100644 index 000000000000..a38dee3d815b --- /dev/null +++ b/Documentation/power/powercap/dtpm.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================== +Dynamic Thermal Power Management framework +========================================== + +On the embedded world, the complexity of the SoC leads to an +increasing number of hotspots which need to be monitored and mitigated +as a whole in order to prevent the temperature to go above the +normative and legally stated 'skin temperature'. + +Another aspect is to sustain the performance for a given power budget, +for example virtual reality where the user can feel dizziness if the +performance is capped while a big CPU is processing something else. Or +reduce the battery charging because the dissipated power is too high +compared with the power consumed by other devices. + +The user space is the most adequate place to dynamically act on the +different devices by limiting their power given an application +profile: it has the knowledge of the platform. + +The Dynamic Thermal Power Management (DTPM) is a technique acting on +the device power by limiting and/or balancing a power budget among +different devices. + +The DTPM framework provides an unified interface to act on the +device power. + +Overview +======== + +The DTPM framework relies on the powercap framework to create the +powercap entries in the sysfs directory and implement the backend +driver to do the connection with the power manageable device. + +The DTPM is a tree representation describing the power constraints +shared between devices, not their physical positions. + +The nodes of the tree are a virtual description aggregating the power +characteristics of the children nodes and their power limitations. + +The leaves of the tree are the real power manageable devices. + +For instance:: + + SoC + | + `-- pkg + | + |-- pd0 (cpu0-3) + | + `-- pd1 (cpu4-5) + +The pkg power will be the sum of pd0 and pd1 power numbers:: + + SoC (400mW - 3100mW) + | + `-- pkg (400mW - 3100mW) + | + |-- pd0 (100mW - 700mW) + | + `-- pd1 (300mW - 2400mW) + +When the nodes are inserted in the tree, their power characteristics are propagated to the parents:: + + SoC (600mW - 5900mW) + | + |-- pkg (400mW - 3100mW) + | | + | |-- pd0 (100mW - 700mW) + | | + | `-- pd1 (300mW - 2400mW) + | + `-- pd2 (200mW - 2800mW) + +Each node have a weight on a 2^10 basis reflecting the percentage of power consumption along the siblings:: + + SoC (w=1024) + | + |-- pkg (w=538) + | | + | |-- pd0 (w=231) + | | + | `-- pd1 (w=794) + | + `-- pd2 (w=486) + + Note the sum of weights at the same level are equal to 1024. + +When a power limitation is applied to a node, then it is distributed along the children given their weights. For example, if we set a power limitation of 3200mW at the 'SoC' root node, the resulting tree will be:: + + SoC (w=1024) <--- power_limit = 3200mW + | + |-- pkg (w=538) --> power_limit = 1681mW + | | + | |-- pd0 (w=231) --> power_limit = 378mW + | | + | `-- pd1 (w=794) --> power_limit = 1303mW + | + `-- pd2 (w=486) --> power_limit = 1519mW + + +Flat description +---------------- + +A root node is created and it is the parent of all the nodes. This +description is the simplest one and it is supposed to give to user +space a flat representation of all the devices supporting the power +limitation without any power limitation distribution. + +Hierarchical description +------------------------ + +The different devices supporting the power limitation are represented +hierarchically. There is one root node, all intermediate nodes are +grouping the child nodes which can be intermediate nodes also or real +devices. + +The intermediate nodes aggregate the power information and allows to +set the power limit given the weight of the nodes. + +User space API +============== + +As stated in the overview, the DTPM framework is built on top of the +powercap framework. Thus the sysfs interface is the same, please refer +to the powercap documentation for further details. + + * power_uw: Instantaneous power consumption. If the node is an + intermediate node, then the power consumption will be the sum of all + children power consumption. + + * max_power_range_uw: The power range resulting of the maximum power + minus the minimum power. + + * name: The name of the node. This is implementation dependent. Even + if it is not recommended for the user space, several nodes can have + the same name. + + * constraint_X_name: The name of the constraint. + + * constraint_X_max_power_uw: The maximum power limit to be applicable + to the node. + + * constraint_X_power_limit_uw: The power limit to be applied to the + node. If the value contained in constraint_X_max_power_uw is set, + the constraint will be removed. + + * constraint_X_time_window_us: The meaning of this file will depend + on the constraint number. + +Constraints +----------- + + * Constraint 0: The power limitation is immediately applied, without + limitation in time. + +Kernel API +========== + +Overview +-------- + +The DTPM framework has no power limiting backend support. It is +generic and provides a set of API to let the different drivers to +implement the backend part for the power limitation and create the +power constraints tree. + +It is up to the platform to provide the initialization function to +allocate and link the different nodes of the tree. + +A special macro has the role of declaring a node and the corresponding +initialization function via a description structure. This one contains +an optional parent field allowing to hook different devices to an +already existing tree at boot time. + +For instance:: + + struct dtpm_descr my_descr = { + .name = "my_name", + .init = my_init_func, + }; + + DTPM_DECLARE(my_descr); + +The nodes of the DTPM tree are described with dtpm structure. The +steps to add a new power limitable device is done in three steps: + + * Allocate the dtpm node + * Set the power number of the dtpm node + * Register the dtpm node + +The registration of the dtpm node is done with the powercap +ops. Basically, it must implements the callbacks to get and set the +power and the limit. + +Alternatively, if the node to be inserted is an intermediate one, then +a simple function to insert it as a future parent is available. + +If a device has its power characteristics changing, then the tree must +be updated with the new power numbers and weights. + +Nomenclature +------------ + + * dtpm_alloc() : Allocate and initialize a dtpm structure + + * dtpm_register() : Add the dtpm node to the tree + + * dtpm_unregister() : Remove the dtpm node from the tree + + * dtpm_update_power() : Update the power characteristics of the dtpm node diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst index 0553008b6279..d9c777b18f7a 100644 --- a/Documentation/power/runtime_pm.rst +++ b/Documentation/power/runtime_pm.rst @@ -579,7 +579,7 @@ should be used. Of course, for this purpose the device's runtime PM has to be enabled earlier by calling pm_runtime_enable(). Note, if the device may execute pm_runtime calls during the probe (such as -if it is registers with a subsystem that may call back in) then the +if it is registered with a subsystem that may call back in) then the pm_runtime_get_sync() call paired with a pm_runtime_put() call will be appropriate to ensure that the device is not put back to sleep during the probe. This can happen with systems such as the network device layer. @@ -587,11 +587,11 @@ probe. This can happen with systems such as the network device layer. It may be desirable to suspend the device once ->probe() has finished. Therefore the driver core uses the asynchronous pm_request_idle() to submit a request to execute the subsystem-level idle callback for the device at that -time. A driver that makes use of the runtime autosuspend feature, may want to +time. A driver that makes use of the runtime autosuspend feature may want to update the last busy mark before returning from ->probe(). Moreover, the driver core prevents runtime PM callbacks from racing with the bus -notifier callback in __device_release_driver(), which is necessary, because the +notifier callback in __device_release_driver(), which is necessary because the notifier is used by some subsystems to carry out operations affecting the runtime PM functionality. It does so by calling pm_runtime_get_sync() before driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications. This @@ -603,7 +603,7 @@ calling pm_runtime_suspend() from their ->remove() routines, the driver core executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER notifications in __device_release_driver(). This requires bus types and drivers to make their ->remove() callbacks avoid races with runtime PM directly, -but also it allows of more flexibility in the handling of devices during the +but it also allows more flexibility in the handling of devices during the removal of their drivers. Drivers in ->remove() callback should undo the runtime PM changes done @@ -693,7 +693,7 @@ that the device appears to be runtime-suspended and its state is fine, so it may be left in runtime suspend provided that all of its descendants are also left in runtime suspend. If that happens, the PM core will not execute any system suspend and resume callbacks for all of those devices, except for the -complete callback, which is then entirely responsible for handling the device +.complete() callback, which is then entirely responsible for handling the device as appropriate. This only applies to system suspend transitions that are not related to hibernation (see Documentation/driver-api/pm/devices.rst for more information). @@ -706,7 +706,7 @@ out the following operations: right before executing the subsystem-level .prepare() callback for it and pm_runtime_barrier() is called for every device right before executing the subsystem-level .suspend() callback for it. In addition to that the PM core - calls __pm_runtime_disable() with 'false' as the second argument for every + calls __pm_runtime_disable() with 'false' as the second argument for every device right before executing the subsystem-level .suspend_late() callback for it. @@ -783,7 +783,7 @@ driver/base/power/generic_ops.c: `int pm_generic_restore_noirq(struct device *dev);` - invoke the ->restore_noirq() callback provided by the device's driver -These functions are the defaults used by the PM core, if a subsystem doesn't +These functions are the defaults used by the PM core if a subsystem doesn't provide its own callbacks for ->runtime_idle(), ->runtime_suspend(), ->runtime_resume(), ->suspend(), ->suspend_noirq(), ->resume(), ->resume_noirq(), ->freeze(), ->freeze_noirq(), ->thaw(), ->thaw_noirq(), diff --git a/MAINTAINERS b/MAINTAINERS index b78a4e585c49..c113989c5cec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4600,6 +4600,7 @@ L: linux-samsung-soc@vger.kernel.org S: Supported F: arch/arm/mach-exynos/pm.c F: drivers/cpuidle/cpuidle-exynos.c +F: include/linux/platform_data/cpuidle-exynos.h CPUIDLE DRIVER - ARM PSCI M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index ced6863a16a5..84d5acb6301b 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -23,6 +23,7 @@ enum pce_status { PCE_STATUS_NONE = 0, PCE_STATUS_ACQUIRED, + PCE_STATUS_PREPARED, PCE_STATUS_ENABLED, PCE_STATUS_ERROR, }; @@ -32,9 +33,113 @@ struct pm_clock_entry { char *con_id; struct clk *clk; enum pce_status status; + bool enabled_when_prepared; }; /** + * pm_clk_list_lock - ensure exclusive access for modifying the PM clock + * entry list. + * @psd: pm_subsys_data instance corresponding to the PM clock entry list + * and clk_op_might_sleep count to be modified. + * + * Get exclusive access before modifying the PM clock entry list and the + * clock_op_might_sleep count to guard against concurrent modifications. + * This also protects against a concurrent clock_op_might_sleep and PM clock + * entry list usage in pm_clk_suspend()/pm_clk_resume() that may or may not + * happen in atomic context, hence both the mutex and the spinlock must be + * taken here. + */ +static void pm_clk_list_lock(struct pm_subsys_data *psd) + __acquires(&psd->lock) +{ + mutex_lock(&psd->clock_mutex); + spin_lock_irq(&psd->lock); +} + +/** + * pm_clk_list_unlock - counterpart to pm_clk_list_lock(). + * @psd: the same pm_subsys_data instance previously passed to + * pm_clk_list_lock(). + */ +static void pm_clk_list_unlock(struct pm_subsys_data *psd) + __releases(&psd->lock) +{ + spin_unlock_irq(&psd->lock); + mutex_unlock(&psd->clock_mutex); +} + +/** + * pm_clk_op_lock - ensure exclusive access for performing clock operations. + * @psd: pm_subsys_data instance corresponding to the PM clock entry list + * and clk_op_might_sleep count being used. + * @flags: stored irq flags. + * @fn: string for the caller function's name. + * + * This is used by pm_clk_suspend() and pm_clk_resume() to guard + * against concurrent modifications to the clock entry list and the + * clock_op_might_sleep count. If clock_op_might_sleep is != 0 then + * only the mutex can be locked and those functions can only be used in + * non atomic context. If clock_op_might_sleep == 0 then these functions + * may be used in any context and only the spinlock can be locked. + * Returns -EINVAL if called in atomic context when clock ops might sleep. + */ +static int pm_clk_op_lock(struct pm_subsys_data *psd, unsigned long *flags, + const char *fn) + /* sparse annotations don't work here as exit state isn't static */ +{ + bool atomic_context = in_atomic() || irqs_disabled(); + +try_again: + spin_lock_irqsave(&psd->lock, *flags); + if (!psd->clock_op_might_sleep) { + /* the __release is there to work around sparse limitations */ + __release(&psd->lock); + return 0; + } + + /* bail out if in atomic context */ + if (atomic_context) { + pr_err("%s: atomic context with clock_ops_might_sleep = %d", + fn, psd->clock_op_might_sleep); + spin_unlock_irqrestore(&psd->lock, *flags); + might_sleep(); + return -EPERM; + } + + /* we must switch to the mutex */ + spin_unlock_irqrestore(&psd->lock, *flags); + mutex_lock(&psd->clock_mutex); + + /* + * There was a possibility for psd->clock_op_might_sleep + * to become 0 above. Keep the mutex only if not the case. + */ + if (likely(psd->clock_op_might_sleep)) + return 0; + + mutex_unlock(&psd->clock_mutex); + goto try_again; +} + +/** + * pm_clk_op_unlock - counterpart to pm_clk_op_lock(). + * @psd: the same pm_subsys_data instance previously passed to + * pm_clk_op_lock(). + * @flags: irq flags provided by pm_clk_op_lock(). + */ +static void pm_clk_op_unlock(struct pm_subsys_data *psd, unsigned long *flags) + /* sparse annotations don't work here as entry state isn't static */ +{ + if (psd->clock_op_might_sleep) { + mutex_unlock(&psd->clock_mutex); + } else { + /* the __acquire is there to work around sparse limitations */ + __acquire(&psd->lock); + spin_unlock_irqrestore(&psd->lock, *flags); + } +} + +/** * pm_clk_enable - Enable a clock, reporting any errors * @dev: The device for the given clock * @ce: PM clock entry corresponding to the clock. @@ -43,14 +148,21 @@ static inline void __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce { int ret; - if (ce->status < PCE_STATUS_ERROR) { + switch (ce->status) { + case PCE_STATUS_ACQUIRED: + ret = clk_prepare_enable(ce->clk); + break; + case PCE_STATUS_PREPARED: ret = clk_enable(ce->clk); - if (!ret) - ce->status = PCE_STATUS_ENABLED; - else - dev_err(dev, "%s: failed to enable clk %p, error %d\n", - __func__, ce->clk, ret); + break; + default: + return; } + if (!ret) + ce->status = PCE_STATUS_ENABLED; + else + dev_err(dev, "%s: failed to enable clk %p, error %d\n", + __func__, ce->clk, ret); } /** @@ -64,17 +176,20 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) ce->clk = clk_get(dev, ce->con_id); if (IS_ERR(ce->clk)) { ce->status = PCE_STATUS_ERROR; + return; + } else if (clk_is_enabled_when_prepared(ce->clk)) { + /* we defer preparing the clock in that case */ + ce->status = PCE_STATUS_ACQUIRED; + ce->enabled_when_prepared = true; + } else if (clk_prepare(ce->clk)) { + ce->status = PCE_STATUS_ERROR; + dev_err(dev, "clk_prepare() failed\n"); + return; } else { - if (clk_prepare(ce->clk)) { - ce->status = PCE_STATUS_ERROR; - dev_err(dev, "clk_prepare() failed\n"); - } else { - ce->status = PCE_STATUS_ACQUIRED; - dev_dbg(dev, - "Clock %pC con_id %s managed by runtime PM.\n", - ce->clk, ce->con_id); - } + ce->status = PCE_STATUS_PREPARED; } + dev_dbg(dev, "Clock %pC con_id %s managed by runtime PM.\n", + ce->clk, ce->con_id); } static int __pm_clk_add(struct device *dev, const char *con_id, @@ -106,9 +221,11 @@ static int __pm_clk_add(struct device *dev, const char *con_id, pm_clk_acquire(dev, ce); - spin_lock_irq(&psd->lock); + pm_clk_list_lock(psd); list_add_tail(&ce->node, &psd->clock_list); - spin_unlock_irq(&psd->lock); + if (ce->enabled_when_prepared) + psd->clock_op_might_sleep++; + pm_clk_list_unlock(psd); return 0; } @@ -239,14 +356,20 @@ static void __pm_clk_remove(struct pm_clock_entry *ce) if (!ce) return; - if (ce->status < PCE_STATUS_ERROR) { - if (ce->status == PCE_STATUS_ENABLED) - clk_disable(ce->clk); - - if (ce->status >= PCE_STATUS_ACQUIRED) { - clk_unprepare(ce->clk); + switch (ce->status) { + case PCE_STATUS_ENABLED: + clk_disable(ce->clk); + fallthrough; + case PCE_STATUS_PREPARED: + clk_unprepare(ce->clk); + fallthrough; + case PCE_STATUS_ACQUIRED: + case PCE_STATUS_ERROR: + if (!IS_ERR(ce->clk)) clk_put(ce->clk); - } + break; + default: + break; } kfree(ce->con_id); @@ -269,7 +392,7 @@ void pm_clk_remove(struct device *dev, const char *con_id) if (!psd) return; - spin_lock_irq(&psd->lock); + pm_clk_list_lock(psd); list_for_each_entry(ce, &psd->clock_list, node) { if (!con_id && !ce->con_id) @@ -280,12 +403,14 @@ void pm_clk_remove(struct device *dev, const char *con_id) goto remove; } - spin_unlock_irq(&psd->lock); + pm_clk_list_unlock(psd); return; remove: list_del(&ce->node); - spin_unlock_irq(&psd->lock); + if (ce->enabled_when_prepared) + psd->clock_op_might_sleep--; + pm_clk_list_unlock(psd); __pm_clk_remove(ce); } @@ -307,19 +432,21 @@ void pm_clk_remove_clk(struct device *dev, struct clk *clk) if (!psd || !clk) return; - spin_lock_irq(&psd->lock); + pm_clk_list_lock(psd); list_for_each_entry(ce, &psd->clock_list, node) { if (clk == ce->clk) goto remove; } - spin_unlock_irq(&psd->lock); + pm_clk_list_unlock(psd); return; remove: list_del(&ce->node); - spin_unlock_irq(&psd->lock); + if (ce->enabled_when_prepared) + psd->clock_op_might_sleep--; + pm_clk_list_unlock(psd); __pm_clk_remove(ce); } @@ -330,13 +457,16 @@ EXPORT_SYMBOL_GPL(pm_clk_remove_clk); * @dev: Device to initialize the list of PM clocks for. * * Initialize the lock and clock_list members of the device's pm_subsys_data - * object. + * object, set the count of clocks that might sleep to 0. */ void pm_clk_init(struct device *dev) { struct pm_subsys_data *psd = dev_to_psd(dev); - if (psd) + if (psd) { INIT_LIST_HEAD(&psd->clock_list); + mutex_init(&psd->clock_mutex); + psd->clock_op_might_sleep = 0; + } } EXPORT_SYMBOL_GPL(pm_clk_init); @@ -372,12 +502,13 @@ void pm_clk_destroy(struct device *dev) INIT_LIST_HEAD(&list); - spin_lock_irq(&psd->lock); + pm_clk_list_lock(psd); list_for_each_entry_safe_reverse(ce, c, &psd->clock_list, node) list_move(&ce->node, &list); + psd->clock_op_might_sleep = 0; - spin_unlock_irq(&psd->lock); + pm_clk_list_unlock(psd); dev_pm_put_subsys_data(dev); @@ -397,23 +528,30 @@ int pm_clk_suspend(struct device *dev) struct pm_subsys_data *psd = dev_to_psd(dev); struct pm_clock_entry *ce; unsigned long flags; + int ret; dev_dbg(dev, "%s()\n", __func__); if (!psd) return 0; - spin_lock_irqsave(&psd->lock, flags); + ret = pm_clk_op_lock(psd, &flags, __func__); + if (ret) + return ret; list_for_each_entry_reverse(ce, &psd->clock_list, node) { - if (ce->status < PCE_STATUS_ERROR) { - if (ce->status == PCE_STATUS_ENABLED) + if (ce->status == PCE_STATUS_ENABLED) { + if (ce->enabled_when_prepared) { + clk_disable_unprepare(ce->clk); + ce->status = PCE_STATUS_ACQUIRED; + } else { clk_disable(ce->clk); - ce->status = PCE_STATUS_ACQUIRED; + ce->status = PCE_STATUS_PREPARED; + } } } - spin_unlock_irqrestore(&psd->lock, flags); + pm_clk_op_unlock(psd, &flags); return 0; } @@ -428,18 +566,21 @@ int pm_clk_resume(struct device *dev) struct pm_subsys_data *psd = dev_to_psd(dev); struct pm_clock_entry *ce; unsigned long flags; + int ret; dev_dbg(dev, "%s()\n", __func__); if (!psd) return 0; - spin_lock_irqsave(&psd->lock, flags); + ret = pm_clk_op_lock(psd, &flags, __func__); + if (ret) + return ret; list_for_each_entry(ce, &psd->clock_list, node) __pm_clk_enable(dev, ce); - spin_unlock_irqrestore(&psd->lock, flags); + pm_clk_op_unlock(psd, &flags); return 0; } diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 9a14eedacb92..aaf6c83b5cf6 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -297,6 +297,18 @@ static int _genpd_reeval_performance_state(struct generic_pm_domain *genpd, return state; } +static int genpd_xlate_performance_state(struct generic_pm_domain *genpd, + struct generic_pm_domain *parent, + unsigned int pstate) +{ + if (!parent->set_performance_state) + return pstate; + + return dev_pm_opp_xlate_performance_state(genpd->opp_table, + parent->opp_table, + pstate); +} + static int _genpd_set_performance_state(struct generic_pm_domain *genpd, unsigned int state, int depth) { @@ -311,13 +323,8 @@ static int _genpd_set_performance_state(struct generic_pm_domain *genpd, list_for_each_entry(link, &genpd->child_links, child_node) { parent = link->parent; - if (!parent->set_performance_state) - continue; - /* Find parent's performance state */ - ret = dev_pm_opp_xlate_performance_state(genpd->opp_table, - parent->opp_table, - state); + ret = genpd_xlate_performance_state(genpd, parent, state); if (unlikely(ret < 0)) goto err; @@ -339,9 +346,11 @@ static int _genpd_set_performance_state(struct generic_pm_domain *genpd, goto err; } - ret = genpd->set_performance_state(genpd, state); - if (ret) - goto err; + if (genpd->set_performance_state) { + ret = genpd->set_performance_state(genpd, state); + if (ret) + goto err; + } genpd->performance_state = state; return 0; @@ -352,9 +361,6 @@ err: child_node) { parent = link->parent; - if (!parent->set_performance_state) - continue; - genpd_lock_nested(parent, depth + 1); parent_state = link->prev_performance_state; @@ -399,9 +405,6 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) if (!genpd) return -ENODEV; - if (unlikely(!genpd->set_performance_state)) - return -EINVAL; - if (WARN_ON(!dev->power.subsys_data || !dev->power.subsys_data->domain_data)) return -EINVAL; @@ -423,6 +426,35 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) } EXPORT_SYMBOL_GPL(dev_pm_genpd_set_performance_state); +/** + * dev_pm_genpd_set_next_wakeup - Notify PM framework of an impending wakeup. + * + * @dev: Device to handle + * @next: impending interrupt/wakeup for the device + * + * + * Allow devices to inform of the next wakeup. It's assumed that the users + * guarantee that the genpd wouldn't be detached while this routine is getting + * called. Additionally, it's also assumed that @dev isn't runtime suspended + * (RPM_SUSPENDED)." + * Although devices are expected to update the next_wakeup after the end of + * their usecase as well, it is possible the devices themselves may not know + * about that, so stale @next will be ignored when powering off the domain. + */ +void dev_pm_genpd_set_next_wakeup(struct device *dev, ktime_t next) +{ + struct generic_pm_domain_data *gpd_data; + struct generic_pm_domain *genpd; + + genpd = dev_to_genpd_safe(dev); + if (!genpd) + return; + + gpd_data = to_gpd_data(dev->power.subsys_data->domain_data); + gpd_data->next_wakeup = next; +} +EXPORT_SYMBOL_GPL(dev_pm_genpd_set_next_wakeup); + static int _genpd_power_on(struct generic_pm_domain *genpd, bool timed) { unsigned int state_idx = genpd->state_idx; @@ -934,8 +966,7 @@ static int genpd_runtime_resume(struct device *dev) err_stop: genpd_stop_dev(genpd, dev); err_poweroff: - if (!pm_runtime_is_irq_safe(dev) || - (pm_runtime_is_irq_safe(dev) && genpd_is_irq_safe(genpd))) { + if (!pm_runtime_is_irq_safe(dev) || genpd_is_irq_safe(genpd)) { genpd_lock(genpd); genpd_power_off(genpd, true, 0); genpd_unlock(genpd); @@ -1465,6 +1496,7 @@ static struct generic_pm_domain_data *genpd_alloc_dev_data(struct device *dev) gpd_data->td.constraint_changed = true; gpd_data->td.effective_constraint_ns = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS; gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier; + gpd_data->next_wakeup = KTIME_MAX; spin_lock_irq(&dev->power.lock); @@ -2463,7 +2495,7 @@ int of_genpd_add_subdomain(struct of_phandle_args *parent_spec, out: mutex_unlock(&gpd_list_lock); - return ret; + return ret == -ENOENT ? -EPROBE_DEFER : ret; } EXPORT_SYMBOL_GPL(of_genpd_add_subdomain); @@ -2952,7 +2984,15 @@ static void rtpm_status_str(struct seq_file *s, struct device *dev) else WARN_ON(1); - seq_puts(s, p); + seq_printf(s, "%-25s ", p); +} + +static void perf_status_str(struct seq_file *s, struct device *dev) +{ + struct generic_pm_domain_data *gpd_data; + + gpd_data = to_gpd_data(dev->power.subsys_data->domain_data); + seq_put_decimal_ull(s, "", gpd_data->performance_state); } static int genpd_summary_one(struct seq_file *s, @@ -2980,7 +3020,7 @@ static int genpd_summary_one(struct seq_file *s, else snprintf(state, sizeof(state), "%s", status_lookup[genpd->status]); - seq_printf(s, "%-30s %-15s ", genpd->name, state); + seq_printf(s, "%-30s %-50s %u", genpd->name, state, genpd->performance_state); /* * Modifications on the list require holding locks on both @@ -2988,6 +3028,8 @@ static int genpd_summary_one(struct seq_file *s, * Also genpd->name is immutable. */ list_for_each_entry(link, &genpd->parent_links, parent_node) { + if (list_is_first(&link->parent_node, &genpd->parent_links)) + seq_printf(s, "\n%48s", " "); seq_printf(s, "%s", link->child->name); if (!list_is_last(&link->parent_node, &genpd->parent_links)) seq_puts(s, ", "); @@ -3002,6 +3044,7 @@ static int genpd_summary_one(struct seq_file *s, seq_printf(s, "\n %-50s ", kobj_path); rtpm_status_str(s, pm_data->dev); + perf_status_str(s, pm_data->dev); kfree(kobj_path); } @@ -3017,9 +3060,9 @@ static int summary_show(struct seq_file *s, void *data) struct generic_pm_domain *genpd; int ret = 0; - seq_puts(s, "domain status children\n"); + seq_puts(s, "domain status children performance\n"); seq_puts(s, " /device runtime status\n"); - seq_puts(s, "----------------------------------------------------------------------\n"); + seq_puts(s, "----------------------------------------------------------------------------------------------\n"); ret = mutex_lock_interruptible(&gpd_list_lock); if (ret) diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index 490ed7deb99a..c6c218758f0b 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -117,6 +117,55 @@ static bool default_suspend_ok(struct device *dev) return td->cached_suspend_ok; } +static void update_domain_next_wakeup(struct generic_pm_domain *genpd, ktime_t now) +{ + ktime_t domain_wakeup = KTIME_MAX; + ktime_t next_wakeup; + struct pm_domain_data *pdd; + struct gpd_link *link; + + if (!(genpd->flags & GENPD_FLAG_MIN_RESIDENCY)) + return; + + /* + * Devices that have a predictable wakeup pattern, may specify + * their next wakeup. Let's find the next wakeup from all the + * devices attached to this domain and from all the sub-domains. + * It is possible that component's a next wakeup may have become + * stale when we read that here. We will ignore to ensure the domain + * is able to enter its optimal idle state. + */ + list_for_each_entry(pdd, &genpd->dev_list, list_node) { + next_wakeup = to_gpd_data(pdd)->next_wakeup; + if (next_wakeup != KTIME_MAX && !ktime_before(next_wakeup, now)) + if (ktime_before(next_wakeup, domain_wakeup)) + domain_wakeup = next_wakeup; + } + + list_for_each_entry(link, &genpd->parent_links, parent_node) { + next_wakeup = link->child->next_wakeup; + if (next_wakeup != KTIME_MAX && !ktime_before(next_wakeup, now)) + if (ktime_before(next_wakeup, domain_wakeup)) + domain_wakeup = next_wakeup; + } + + genpd->next_wakeup = domain_wakeup; +} + +static bool next_wakeup_allows_state(struct generic_pm_domain *genpd, + unsigned int state, ktime_t now) +{ + ktime_t domain_wakeup = genpd->next_wakeup; + s64 idle_time_ns, min_sleep_ns; + + min_sleep_ns = genpd->states[state].power_off_latency_ns + + genpd->states[state].residency_ns; + + idle_time_ns = ktime_to_ns(ktime_sub(domain_wakeup, now)); + + return idle_time_ns >= min_sleep_ns; +} + static bool __default_power_down_ok(struct dev_pm_domain *pd, unsigned int state) { @@ -201,16 +250,41 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, } /** - * default_power_down_ok - Default generic PM domain power off governor routine. + * _default_power_down_ok - Default generic PM domain power off governor routine. * @pd: PM domain to check. * * This routine must be executed under the PM domain's lock. */ -static bool default_power_down_ok(struct dev_pm_domain *pd) +static bool _default_power_down_ok(struct dev_pm_domain *pd, ktime_t now) { struct generic_pm_domain *genpd = pd_to_genpd(pd); + int state_idx = genpd->state_count - 1; struct gpd_link *link; + /* + * Find the next wakeup from devices that can determine their own wakeup + * to find when the domain would wakeup and do it for every device down + * the hierarchy. It is not worth while to sleep if the state's residency + * cannot be met. + */ + update_domain_next_wakeup(genpd, now); + if ((genpd->flags & GENPD_FLAG_MIN_RESIDENCY) && (genpd->next_wakeup != KTIME_MAX)) { + /* Let's find out the deepest domain idle state, the devices prefer */ + while (state_idx >= 0) { + if (next_wakeup_allows_state(genpd, state_idx, now)) { + genpd->max_off_time_changed = true; + break; + } + state_idx--; + } + + if (state_idx < 0) { + state_idx = 0; + genpd->cached_power_down_ok = false; + goto done; + } + } + if (!genpd->max_off_time_changed) { genpd->state_idx = genpd->cached_power_down_state_idx; return genpd->cached_power_down_ok; @@ -228,21 +302,30 @@ static bool default_power_down_ok(struct dev_pm_domain *pd) genpd->max_off_time_ns = -1; genpd->max_off_time_changed = false; genpd->cached_power_down_ok = true; - genpd->state_idx = genpd->state_count - 1; - /* Find a state to power down to, starting from the deepest. */ - while (!__default_power_down_ok(pd, genpd->state_idx)) { - if (genpd->state_idx == 0) { + /* + * Find a state to power down to, starting from the state + * determined by the next wakeup. + */ + while (!__default_power_down_ok(pd, state_idx)) { + if (state_idx == 0) { genpd->cached_power_down_ok = false; break; } - genpd->state_idx--; + state_idx--; } +done: + genpd->state_idx = state_idx; genpd->cached_power_down_state_idx = genpd->state_idx; return genpd->cached_power_down_ok; } +static bool default_power_down_ok(struct dev_pm_domain *pd) +{ + return _default_power_down_ok(pd, ktime_get()); +} + static bool always_on_power_down_ok(struct dev_pm_domain *domain) { return false; @@ -254,11 +337,12 @@ static bool cpu_power_down_ok(struct dev_pm_domain *pd) struct generic_pm_domain *genpd = pd_to_genpd(pd); struct cpuidle_device *dev; ktime_t domain_wakeup, next_hrtimer; + ktime_t now = ktime_get(); s64 idle_duration_ns; int cpu, i; /* Validate dev PM QoS constraints. */ - if (!default_power_down_ok(pd)) + if (!_default_power_down_ok(pd, now)) return false; if (!(genpd->flags & GENPD_FLAG_CPU_DOMAIN)) @@ -280,7 +364,7 @@ static bool cpu_power_down_ok(struct dev_pm_domain *pd) } /* The minimum idle duration is from now - until the next wakeup. */ - idle_duration_ns = ktime_to_ns(ktime_sub(domain_wakeup, ktime_get())); + idle_duration_ns = ktime_to_ns(ktime_sub(domain_wakeup, now)); if (idle_duration_ns <= 0) return false; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 46793276598d..f893c3c5af07 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -16,6 +16,7 @@ */ #define pr_fmt(fmt) "PM: " fmt +#define dev_fmt pr_fmt #include <linux/device.h> #include <linux/export.h> @@ -449,8 +450,8 @@ static void pm_dev_dbg(struct device *dev, pm_message_t state, const char *info) static void pm_dev_err(struct device *dev, pm_message_t state, const char *info, int error) { - pr_err("Device %s failed to %s%s: error %d\n", - dev_name(dev), pm_verb(state.event), info, error); + dev_err(dev, "failed to %s%s: error %d\n", pm_verb(state.event), info, + error); } static void dpm_show_time(ktime_t starttime, pm_message_t state, int error, @@ -1897,8 +1898,8 @@ int dpm_prepare(pm_message_t state) error = 0; continue; } - pr_info("Device %s not prepared for power transition: code %d\n", - dev_name(dev), error); + dev_info(dev, "not prepared for power transition: code %d\n", + error); put_device(dev); break; } diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index bfda153b1a41..a46a7e30881b 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1100,7 +1100,7 @@ EXPORT_SYMBOL_GPL(__pm_runtime_resume); * suspending the device when both its runtime PM status is %RPM_ACTIVE and its * runtime PM usage counter is not zero. * - * The caller is resposible for decrementing the runtime PM usage counter of + * The caller is responsible for decrementing the runtime PM usage counter of * @dev after this function has returned a positive value for it. */ int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 8c1d04db990d..3d751ae5bc70 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1164,6 +1164,27 @@ int clk_enable(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_enable); +/** + * clk_is_enabled_when_prepared - indicate if preparing a clock also enables it. + * @clk: clock source + * + * Returns true if clk_prepare() implicitly enables the clock, effectively + * making clk_enable()/clk_disable() no-ops, false otherwise. + * + * This is of interest mainly to power management code where actually + * disabling the clock also requires unpreparing it to have any material + * effect. + * + * Regardless of the value returned here, the caller must always invoke + * clk_enable() or clk_prepare_enable() and counterparts for usage counts + * to be right. + */ +bool clk_is_enabled_when_prepared(struct clk *clk) +{ + return clk && !(clk->core->ops->enable && clk->core->ops->disable); +} +EXPORT_SYMBOL_GPL(clk_is_enabled_when_prepared); + static int clk_core_prepare_enable(struct clk_core *core) { int ret; diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 1f73fa75b1a0..e65e0a43be64 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -289,11 +289,6 @@ config ARM_STI_CPUFREQ this config option if you wish to add CPUFreq support for STi based SoCs. -config ARM_TANGO_CPUFREQ - bool - depends on CPUFREQ_DT && ARCH_TANGO - default y - config ARM_TEGRA20_CPUFREQ tristate "Tegra20/30 CPUFreq support" depends on ARCH_TEGRA && CPUFREQ_DT diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index f1b7e3dd6e5d..1ab9b1536304 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -79,7 +79,6 @@ obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o -obj-$(CONFIG_ARM_TANGO_CPUFREQ) += tango-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c index 3e31e5d28b79..4153150e20db 100644 --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -597,6 +597,16 @@ unmap_base: return ret; } +static void brcm_avs_prepare_uninit(struct platform_device *pdev) +{ + struct private_data *priv; + + priv = platform_get_drvdata(pdev); + + iounmap(priv->avs_intr_base); + iounmap(priv->base); +} + static int brcm_avs_cpufreq_init(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *freq_table; @@ -732,21 +742,21 @@ static int brcm_avs_cpufreq_probe(struct platform_device *pdev) brcm_avs_driver.driver_data = pdev; - return cpufreq_register_driver(&brcm_avs_driver); + ret = cpufreq_register_driver(&brcm_avs_driver); + if (ret) + brcm_avs_prepare_uninit(pdev); + + return ret; } static int brcm_avs_cpufreq_remove(struct platform_device *pdev) { - struct private_data *priv; int ret; ret = cpufreq_unregister_driver(&brcm_avs_driver); - if (ret) - return ret; + WARN_ON(ret); - priv = platform_get_drvdata(pdev); - iounmap(priv->base); - iounmap(priv->avs_intr_base); + brcm_avs_prepare_uninit(pdev); return 0; } diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index bd2db0188cbb..3ba2f716fe97 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -141,8 +141,6 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "st,stih410", }, { .compatible = "st,stih418", }, - { .compatible = "sigma,tango4", }, - { .compatible = "ti,am33xx", }, { .compatible = "ti,am43", }, { .compatible = "ti,dra7", }, diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index ad4234518ef6..b1e1bdc63b01 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -175,7 +175,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy) } static struct cpufreq_driver dt_cpufreq_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, .target_index = set_target, diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d0a3525ce27f..7d0ae968def7 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2810,8 +2810,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) if (ret) goto err_boost_unreg; - if (!(cpufreq_driver->flags & CPUFREQ_STICKY) && - list_empty(&cpufreq_policy_list)) { + if (unlikely(list_empty(&cpufreq_policy_list))) { /* if all ->init() calls failed, unregister */ ret = -ENODEV; pr_debug("%s: No CPU initialized for driver %s\n", __func__, diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index 91f477a6cbc4..9e97f60f8199 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -95,7 +95,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) } static struct cpufreq_driver davinci_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = davinci_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index be05e038d956..5175ae3cac44 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -819,13 +819,13 @@ static struct freq_attr *hwp_cpufreq_attrs[] = { NULL, }; -static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max, +static void intel_pstate_get_hwp_max(struct cpudata *cpu, int *phy_max, int *current_max) { u64 cap; - rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); - WRITE_ONCE(all_cpu_data[cpu]->hwp_cap_cached, cap); + rdmsrl_on_cpu(cpu->cpu, MSR_HWP_CAPABILITIES, &cap); + WRITE_ONCE(cpu->hwp_cap_cached, cap); if (global.no_turbo || global.turbo_disabled) *current_max = HWP_GUARANTEED_PERF(cap); else @@ -914,7 +914,7 @@ static void intel_pstate_hwp_offline(struct cpudata *cpu) } value &= ~GENMASK_ULL(31, 0); - min_perf = HWP_LOWEST_PERF(cpu->hwp_cap_cached); + min_perf = HWP_LOWEST_PERF(READ_ONCE(cpu->hwp_cap_cached)); /* Set hwp_max = hwp_min */ value |= HWP_MAX_PERF(min_perf); @@ -1213,7 +1213,7 @@ static void update_qos_request(enum freq_qos_req_type type) continue; if (hwp_active) - intel_pstate_get_hwp_max(i, &turbo_max, &max_state); + intel_pstate_get_hwp_max(cpu, &turbo_max, &max_state); else turbo_max = cpu->pstate.turbo_pstate; @@ -1714,21 +1714,22 @@ static void intel_pstate_max_within_limits(struct cpudata *cpu) static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) { cpu->pstate.min_pstate = pstate_funcs.get_min(); - cpu->pstate.max_pstate = pstate_funcs.get_max(); cpu->pstate.max_pstate_physical = pstate_funcs.get_max_physical(); cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); cpu->pstate.scaling = pstate_funcs.get_scaling(); - cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; if (hwp_active && !hwp_mode_bdw) { unsigned int phy_max, current_max; - intel_pstate_get_hwp_max(cpu->cpu, &phy_max, ¤t_max); + intel_pstate_get_hwp_max(cpu, &phy_max, ¤t_max); cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling; cpu->pstate.turbo_pstate = phy_max; + cpu->pstate.max_pstate = HWP_GUARANTEED_PERF(READ_ONCE(cpu->hwp_cap_cached)); } else { cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + cpu->pstate.max_pstate = pstate_funcs.get_max(); } + cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; if (pstate_funcs.get_aperf_mperf_shift) cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); @@ -1750,6 +1751,7 @@ static int hwp_boost_hold_time_ns = 3 * NSEC_PER_MSEC; static inline void intel_pstate_hwp_boost_up(struct cpudata *cpu) { u64 hwp_req = READ_ONCE(cpu->hwp_req_cached); + u64 hwp_cap = READ_ONCE(cpu->hwp_cap_cached); u32 max_limit = (hwp_req & 0xff00) >> 8; u32 min_limit = (hwp_req & 0xff); u32 boost_level1; @@ -1776,14 +1778,14 @@ static inline void intel_pstate_hwp_boost_up(struct cpudata *cpu) cpu->hwp_boost_min = min_limit; /* level at half way mark between min and guranteed */ - boost_level1 = (HWP_GUARANTEED_PERF(cpu->hwp_cap_cached) + min_limit) >> 1; + boost_level1 = (HWP_GUARANTEED_PERF(hwp_cap) + min_limit) >> 1; if (cpu->hwp_boost_min < boost_level1) cpu->hwp_boost_min = boost_level1; - else if (cpu->hwp_boost_min < HWP_GUARANTEED_PERF(cpu->hwp_cap_cached)) - cpu->hwp_boost_min = HWP_GUARANTEED_PERF(cpu->hwp_cap_cached); - else if (cpu->hwp_boost_min == HWP_GUARANTEED_PERF(cpu->hwp_cap_cached) && - max_limit != HWP_GUARANTEED_PERF(cpu->hwp_cap_cached)) + else if (cpu->hwp_boost_min < HWP_GUARANTEED_PERF(hwp_cap)) + cpu->hwp_boost_min = HWP_GUARANTEED_PERF(hwp_cap); + else if (cpu->hwp_boost_min == HWP_GUARANTEED_PERF(hwp_cap) && + max_limit != HWP_GUARANTEED_PERF(hwp_cap)) cpu->hwp_boost_min = max_limit; else return; @@ -2207,7 +2209,7 @@ static void intel_pstate_update_perf_limits(struct cpudata *cpu, * rather than pure ratios. */ if (hwp_active) { - intel_pstate_get_hwp_max(cpu->cpu, &turbo_max, &max_state); + intel_pstate_get_hwp_max(cpu, &turbo_max, &max_state); } else { max_state = global.no_turbo || global.turbo_disabled ? cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; @@ -2322,7 +2324,7 @@ static void intel_pstate_verify_cpu_policy(struct cpudata *cpu, if (hwp_active) { int max_state, turbo_max; - intel_pstate_get_hwp_max(cpu->cpu, &turbo_max, &max_state); + intel_pstate_get_hwp_max(cpu, &turbo_max, &max_state); max_freq = max_state * cpu->pstate.scaling; } else { max_freq = intel_pstate_get_max_freq(cpu); @@ -2496,7 +2498,7 @@ static int intel_cpufreq_verify_policy(struct cpufreq_policy_data *policy) * driver call was via the normal or fast switch path. Various graphs * output from the intel_pstate_tracer.py utility that include core_busy * (or performance or core_avg_perf) have a fixed y-axis from 0 to 100%, - * so we use 10 to indicate the the normal path through the driver, and + * so we use 10 to indicate the normal path through the driver, and * 90 to indicate the fast switch path through the driver. * The scaled_busy field is not used, and is set to 0. */ @@ -2526,7 +2528,7 @@ static void intel_cpufreq_trace(struct cpudata *cpu, unsigned int trace_type, in fp_toint(cpu->iowait_boost * 100)); } -static void intel_cpufreq_adjust_hwp(struct cpudata *cpu, u32 min, u32 max, +static void intel_cpufreq_hwp_update(struct cpudata *cpu, u32 min, u32 max, u32 desired, bool fast_switch) { u64 prev = READ_ONCE(cpu->hwp_req_cached), value = prev; @@ -2550,7 +2552,7 @@ static void intel_cpufreq_adjust_hwp(struct cpudata *cpu, u32 min, u32 max, wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value); } -static void intel_cpufreq_adjust_perf_ctl(struct cpudata *cpu, +static void intel_cpufreq_perf_ctl_update(struct cpudata *cpu, u32 target_pstate, bool fast_switch) { if (fast_switch) @@ -2572,10 +2574,10 @@ static int intel_cpufreq_update_pstate(struct cpufreq_policy *policy, int max_pstate = policy->strict_target ? target_pstate : cpu->max_perf_ratio; - intel_cpufreq_adjust_hwp(cpu, target_pstate, max_pstate, 0, + intel_cpufreq_hwp_update(cpu, target_pstate, max_pstate, 0, fast_switch); } else if (target_pstate != old_pstate) { - intel_cpufreq_adjust_perf_ctl(cpu, target_pstate, fast_switch); + intel_cpufreq_perf_ctl_update(cpu, target_pstate, fast_switch); } cpu->pstate.current_pstate = target_pstate; @@ -2673,7 +2675,7 @@ static void intel_cpufreq_adjust_perf(unsigned int cpunum, target_pstate = clamp_t(int, target_pstate, min_pstate, max_pstate); - intel_cpufreq_adjust_hwp(cpu, min_pstate, max_pstate, target_pstate, true); + intel_cpufreq_hwp_update(cpu, min_pstate, max_pstate, target_pstate, true); cpu->pstate.current_pstate = target_pstate; intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate); @@ -2709,7 +2711,7 @@ static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy) if (hwp_active) { u64 value; - intel_pstate_get_hwp_max(policy->cpu, &turbo_max, &max_state); + intel_pstate_get_hwp_max(cpu, &turbo_max, &max_state); policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY_HWP; rdmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, &value); WRITE_ONCE(cpu->hwp_req_cached, value); diff --git a/drivers/cpufreq/loongson1-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c index 86f612593e49..fb72d709db56 100644 --- a/drivers/cpufreq/loongson1-cpufreq.c +++ b/drivers/cpufreq/loongson1-cpufreq.c @@ -116,7 +116,7 @@ static int ls1x_cpufreq_exit(struct cpufreq_policy *policy) static struct cpufreq_driver ls1x_cpufreq_driver = { .name = "cpufreq-ls1x", - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = ls1x_cpufreq_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c index 022e3e966e71..f2e491b25b07 100644 --- a/drivers/cpufreq/mediatek-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -463,7 +463,7 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy) } static struct cpufreq_driver mtk_cpufreq_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 3694bb030df3..e035ee216b0f 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -144,7 +144,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy) } static struct cpufreq_driver omap_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = omap_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index 73621bc11976..4f20c6a9108d 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -439,8 +439,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .init = pmac_cpufreq_cpu_init, .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN | - CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .attr = cpufreq_generic_attr, .name = "powermac", }; diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index 9ed5341dc515..356244510b18 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -54,7 +54,7 @@ static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, if (IS_ERR(opp)) return PTR_ERR(opp); - ret = dev_pm_opp_set_bw(dev, opp); + ret = dev_pm_opp_set_opp(dev, opp); dev_pm_opp_put(opp); return ret; } @@ -347,6 +347,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) dev_pm_opp_of_register_em(cpu_dev, policy->cpus); + if (policy_has_boost_freq(policy)) { + ret = cpufreq_enable_boost_support(); + if (ret) + dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); + } + return 0; error: devm_iounmap(dev, base); @@ -374,7 +380,7 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = { }; static struct cpufreq_driver cpufreq_qcom_hw_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 37efc0dc3f91..7380c32b238e 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -420,7 +420,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) #endif static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .target = s3c_cpufreq_target, .get = cpufreq_generic_get, .init = s3c_cpufreq_init, diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index bed496cf8d24..69786e5bbf05 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -574,7 +574,7 @@ static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, } static struct cpufreq_driver s5pv210_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = s5pv210_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c index 5c075ef6adc0..252b9fc26124 100644 --- a/drivers/cpufreq/sa1100-cpufreq.c +++ b/drivers/cpufreq/sa1100-cpufreq.c @@ -186,7 +186,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy) } static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = sa1100_target, diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index d9d04d935b3a..1a83c8678a63 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -310,7 +310,7 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy) /* sa1110_driver needs __refdata because it must remain after init registers * it with cpufreq_register_driver() */ static struct cpufreq_driver sa1110_driver __refdata = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, .verify = cpufreq_generic_frequency_table_verify, .target_index = sa1110_target, diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index 491a0a24fb1e..5bd03b59887f 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -217,7 +217,7 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) static struct cpufreq_driver scmi_cpufreq_driver = { .name = "scmi", - .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index e5140ad63db8..d6a698a1b5d1 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -191,7 +191,7 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy) static struct cpufreq_driver scpi_cpufreq_driver = { .name = "scpi-cpufreq", - .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | CPUFREQ_IS_COOLING_DEV, .verify = cpufreq_generic_frequency_table_verify, diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 73bd8dc47074..7d0d62a06bf3 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -160,7 +160,7 @@ static int spear_cpufreq_init(struct cpufreq_policy *policy) static struct cpufreq_driver spear_cpufreq_driver = { .name = "cpufreq-spear", - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = spear_cpufreq_target, .get = cpufreq_generic_get, diff --git a/drivers/cpufreq/tango-cpufreq.c b/drivers/cpufreq/tango-cpufreq.c deleted file mode 100644 index 89a7f860bfe8..000000000000 --- a/drivers/cpufreq/tango-cpufreq.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/of.h> -#include <linux/cpu.h> -#include <linux/clk.h> -#include <linux/pm_opp.h> -#include <linux/platform_device.h> - -static const struct of_device_id machines[] __initconst = { - { .compatible = "sigma,tango4" }, - { /* sentinel */ } -}; - -static int __init tango_cpufreq_init(void) -{ - struct device *cpu_dev = get_cpu_device(0); - unsigned long max_freq; - struct clk *cpu_clk; - void *res; - - if (!of_match_node(machines, of_root)) - return -ENODEV; - - cpu_clk = clk_get(cpu_dev, NULL); - if (IS_ERR(cpu_clk)) - return -ENODEV; - - max_freq = clk_get_rate(cpu_clk); - - dev_pm_opp_add(cpu_dev, max_freq / 1, 0); - dev_pm_opp_add(cpu_dev, max_freq / 2, 0); - dev_pm_opp_add(cpu_dev, max_freq / 3, 0); - dev_pm_opp_add(cpu_dev, max_freq / 5, 0); - dev_pm_opp_add(cpu_dev, max_freq / 9, 0); - - res = platform_device_register_data(NULL, "cpufreq-dt", -1, NULL, 0); - - return PTR_ERR_OR_ZERO(res); -} -device_initcall(tango_cpufreq_init); diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c index e566ea298b59..5d1943e787b0 100644 --- a/drivers/cpufreq/tegra186-cpufreq.c +++ b/drivers/cpufreq/tegra186-cpufreq.c @@ -117,7 +117,7 @@ static unsigned int tegra186_cpufreq_get(unsigned int cpu) static struct cpufreq_driver tegra186_cpufreq_driver = { .name = "tegra186", - .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .get = tegra186_cpufreq_get, .verify = cpufreq_generic_frequency_table_verify, diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c index 6a67f36f3b80..a9620e4489ae 100644 --- a/drivers/cpufreq/tegra194-cpufreq.c +++ b/drivers/cpufreq/tegra194-cpufreq.c @@ -272,8 +272,7 @@ static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy, static struct cpufreq_driver tegra194_cpufreq_driver = { .name = "tegra194", - .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS | - CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = tegra194_cpufreq_set_target, .get = tegra194_get_speed, diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c index 8c893043953e..e8db3d75be25 100644 --- a/drivers/cpufreq/tegra20-cpufreq.c +++ b/drivers/cpufreq/tegra20-cpufreq.c @@ -32,6 +32,16 @@ static bool cpu0_node_has_opp_v2_prop(void) return ret; } +static void tegra20_cpufreq_put_supported_hw(void *opp_table) +{ + dev_pm_opp_put_supported_hw(opp_table); +} + +static void tegra20_cpufreq_dt_unregister(void *cpufreq_dt) +{ + platform_device_unregister(cpufreq_dt); +} + static int tegra20_cpufreq_probe(struct platform_device *pdev) { struct platform_device *cpufreq_dt; @@ -68,42 +78,31 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev) return err; } + err = devm_add_action_or_reset(&pdev->dev, + tegra20_cpufreq_put_supported_hw, + opp_table); + if (err) + return err; + cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); err = PTR_ERR_OR_ZERO(cpufreq_dt); if (err) { dev_err(&pdev->dev, "failed to create cpufreq-dt device: %d\n", err); - goto err_put_supported_hw; + return err; } - platform_set_drvdata(pdev, cpufreq_dt); - - return 0; - -err_put_supported_hw: - dev_pm_opp_put_supported_hw(opp_table); - - return err; -} - -static int tegra20_cpufreq_remove(struct platform_device *pdev) -{ - struct platform_device *cpufreq_dt; - struct opp_table *opp_table; - - cpufreq_dt = platform_get_drvdata(pdev); - platform_device_unregister(cpufreq_dt); - - opp_table = dev_pm_opp_get_opp_table(get_cpu_device(0)); - dev_pm_opp_put_supported_hw(opp_table); - dev_pm_opp_put_opp_table(opp_table); + err = devm_add_action_or_reset(&pdev->dev, + tegra20_cpufreq_dt_unregister, + cpufreq_dt); + if (err) + return err; return 0; } static struct platform_driver tegra20_cpufreq_driver = { .probe = tegra20_cpufreq_probe, - .remove = tegra20_cpufreq_remove, .driver = { .name = "tegra20-cpufreq", }, diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c index f711d8eaea6a..51dfa9ae6cf5 100644 --- a/drivers/cpufreq/vexpress-spc-cpufreq.c +++ b/drivers/cpufreq/vexpress-spc-cpufreq.c @@ -486,8 +486,7 @@ static void ve_spc_cpufreq_ready(struct cpufreq_policy *policy) static struct cpufreq_driver ve_spc_cpufreq_driver = { .name = "vexpress-spc", - .flags = CPUFREQ_STICKY | - CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = ve_spc_cpufreq_set_target, diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 6aa10de792b3..bf3047896e41 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -757,6 +757,9 @@ static void devfreq_dev_release(struct device *dev) if (devfreq->profile->exit) devfreq->profile->exit(devfreq->dev.parent); + if (devfreq->opp_table) + dev_pm_opp_put_opp_table(devfreq->opp_table); + mutex_destroy(&devfreq->lock); kfree(devfreq); } @@ -844,6 +847,10 @@ struct devfreq *devfreq_add_device(struct device *dev, } devfreq->suspend_freq = dev_pm_opp_get_suspend_opp_freq(dev); + devfreq->opp_table = dev_pm_opp_get_opp_table(dev); + if (IS_ERR(devfreq->opp_table)) + devfreq->opp_table = NULL; + atomic_set(&devfreq->suspend_count, 0); dev_set_name(&devfreq->dev, "%s", dev_name(dev)); @@ -893,13 +900,13 @@ struct devfreq *devfreq_add_device(struct device *dev, goto err_devfreq; devfreq->nb_min.notifier_call = qos_min_notifier_call; - err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, + err = dev_pm_qos_add_notifier(dev, &devfreq->nb_min, DEV_PM_QOS_MIN_FREQUENCY); if (err) goto err_devfreq; devfreq->nb_max.notifier_call = qos_max_notifier_call; - err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, + err = dev_pm_qos_add_notifier(dev, &devfreq->nb_max, DEV_PM_QOS_MAX_FREQUENCY); if (err) goto err_devfreq; diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h index 2a52f97b542d..70f44b3ca42e 100644 --- a/drivers/devfreq/governor.h +++ b/drivers/devfreq/governor.h @@ -40,7 +40,7 @@ /* * Definition of governor attribute flags except for common sysfs attributes * - DEVFREQ_GOV_ATTR_POLLING_INTERVAL - * : Indicate polling_interal sysfs attribute + * : Indicate polling_interval sysfs attribute * - DEVFREQ_GOV_ATTR_TIMER * : Indicate timer sysfs attribute */ diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c index 63332e4a65ae..b094132bd20b 100644 --- a/drivers/devfreq/governor_passive.c +++ b/drivers/devfreq/governor_passive.c @@ -19,18 +19,16 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, = (struct devfreq_passive_data *)devfreq->data; struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent; unsigned long child_freq = ULONG_MAX; - struct dev_pm_opp *opp; - int i, count, ret = 0; + struct dev_pm_opp *opp, *p_opp; + int i, count; /* * If the devfreq device with passive governor has the specific method * to determine the next frequency, should use the get_target_freq() * of struct devfreq_passive_data. */ - if (p_data->get_target_freq) { - ret = p_data->get_target_freq(devfreq, freq); - goto out; - } + if (p_data->get_target_freq) + return p_data->get_target_freq(devfreq, freq); /* * If the parent and passive devfreq device uses the OPP table, @@ -56,26 +54,35 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, * list of parent device. Because in this case, *freq is temporary * value which is decided by ondemand governor. */ - opp = devfreq_recommended_opp(parent_devfreq->dev.parent, freq, 0); - if (IS_ERR(opp)) { - ret = PTR_ERR(opp); - goto out; - } + if (devfreq->opp_table && parent_devfreq->opp_table) { + p_opp = devfreq_recommended_opp(parent_devfreq->dev.parent, + freq, 0); + if (IS_ERR(p_opp)) + return PTR_ERR(p_opp); + + opp = dev_pm_opp_xlate_required_opp(parent_devfreq->opp_table, + devfreq->opp_table, p_opp); + dev_pm_opp_put(p_opp); - dev_pm_opp_put(opp); + if (IS_ERR(opp)) + return PTR_ERR(opp); + + *freq = dev_pm_opp_get_freq(opp); + dev_pm_opp_put(opp); + + return 0; + } /* - * Get the OPP table's index of decided freqeuncy by governor + * Get the OPP table's index of decided frequency by governor * of parent device. */ for (i = 0; i < parent_devfreq->profile->max_state; i++) if (parent_devfreq->profile->freq_table[i] == *freq) break; - if (i == parent_devfreq->profile->max_state) { - ret = -EINVAL; - goto out; - } + if (i == parent_devfreq->profile->max_state) + return -EINVAL; /* Get the suitable frequency by using index of parent device. */ if (i < devfreq->profile->max_state) { @@ -88,8 +95,7 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, /* Return the suitable frequency for passive device. */ *freq = child_freq; -out: - return ret; + return 0; } static int devfreq_passive_notifier_call(struct notifier_block *nb, diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c index 2e912166a993..9e9d3b4c6d48 100644 --- a/drivers/devfreq/rk3399_dmc.c +++ b/drivers/devfreq/rk3399_dmc.c @@ -400,7 +400,7 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev) default: ret = -EINVAL; goto err_edev; - }; + } no_pmu: arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0, diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c index 117cad7968ab..ce83f883ca65 100644 --- a/drivers/devfreq/tegra30-devfreq.c +++ b/drivers/devfreq/tegra30-devfreq.c @@ -647,7 +647,7 @@ static int tegra_devfreq_target(struct device *dev, unsigned long *freq, return PTR_ERR(opp); } - ret = dev_pm_opp_set_bw(dev, opp); + ret = dev_pm_opp_set_opp(dev, opp); dev_pm_opp_put(opp); return ret; @@ -849,7 +849,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev) return err; } - err = dev_pm_opp_of_add_table(&pdev->dev); + err = dev_pm_opp_of_add_table_noclk(&pdev->dev, 0); if (err) { dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err); goto put_hw; diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index e6703ae98760..05e0ef58fe32 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -134,7 +134,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp) if (!gmu->legacy) { a6xx_hfi_set_freq(gmu, perf_index); - dev_pm_opp_set_bw(&gpu->pdev->dev, opp); + dev_pm_opp_set_opp(&gpu->pdev->dev, opp); pm_runtime_put(gmu->dev); return; } @@ -158,7 +158,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp) if (ret) dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret); - dev_pm_opp_set_bw(&gpu->pdev->dev, opp); + dev_pm_opp_set_opp(&gpu->pdev->dev, opp); pm_runtime_put(gmu->dev); } @@ -866,7 +866,7 @@ static void a6xx_gmu_set_initial_bw(struct msm_gpu *gpu, struct a6xx_gmu *gmu) if (IS_ERR_OR_NULL(gpu_opp)) return; - dev_pm_opp_set_bw(&gpu->pdev->dev, gpu_opp); + dev_pm_opp_set_opp(&gpu->pdev->dev, gpu_opp); dev_pm_opp_put(gpu_opp); } @@ -1072,7 +1072,7 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu) a6xx_gmu_shutdown(gmu); /* Remove the bus vote */ - dev_pm_opp_set_bw(&gpu->pdev->dev, NULL); + dev_pm_opp_set_opp(&gpu->pdev->dev, NULL); /* * Make sure the GX domain is off before turning off the GMU (CX) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 28f93b9aa51b..3273360f30f7 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -37,7 +37,7 @@ */ /* un-comment DEBUG to enable pr_debug() statements */ -#define DEBUG +/* #define DEBUG */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 8c905aabacc0..c3f3d9249cc5 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -27,6 +27,10 @@ * various states of availability. */ LIST_HEAD(opp_tables); + +/* OPP tables with uninitialized required OPPs */ +LIST_HEAD(lazy_opp_tables); + /* Lock to allow exclusive modification to the device and opp lists */ DEFINE_MUTEX(opp_table_lock); /* Flag indicating that opp_tables list is being updated at the moment */ @@ -146,6 +150,32 @@ unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp) EXPORT_SYMBOL_GPL(dev_pm_opp_get_level); /** + * dev_pm_opp_get_required_pstate() - Gets the required performance state + * corresponding to an available opp + * @opp: opp for which performance state has to be returned for + * @index: index of the required opp + * + * Return: performance state read from device tree corresponding to the + * required opp, else return 0. + */ +unsigned int dev_pm_opp_get_required_pstate(struct dev_pm_opp *opp, + unsigned int index) +{ + if (IS_ERR_OR_NULL(opp) || !opp->available || + index >= opp->opp_table->required_opp_count) { + pr_err("%s: Invalid parameters\n", __func__); + return 0; + } + + /* required-opps not fully initialized yet */ + if (lazy_linking_pending(opp->opp_table)) + return 0; + + return opp->required_opps[index]->pstate; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_required_pstate); + +/** * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not * @opp: opp for which turbo mode is being verified * @@ -449,6 +479,55 @@ struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev, } EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact); +/** + * dev_pm_opp_find_level_ceil() - search for an rounded up level + * @dev: device for which we do this operation + * @level: level to search for + * + * Return: Searches for rounded up match in the opp table and returns pointer + * to the matching opp if found, else returns ERR_PTR in case of error and + * should be handled using IS_ERR. Error return values can be: + * EINVAL: for bad pointer + * ERANGE: no match found for search + * ENODEV: if device not found in list of registered devices + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + */ +struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev, + unsigned int *level) +{ + struct opp_table *opp_table; + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + int r = PTR_ERR(opp_table); + + dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r); + return ERR_PTR(r); + } + + mutex_lock(&opp_table->lock); + + list_for_each_entry(temp_opp, &opp_table->opp_list, node) { + if (temp_opp->available && temp_opp->level >= *level) { + opp = temp_opp; + *level = opp->level; + + /* Increment the reference count of OPP */ + dev_pm_opp_get(opp); + break; + } + } + + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); + + return opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil); + static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table, unsigned long *freq) { @@ -655,6 +734,10 @@ static inline int _generic_set_opp_clk_only(struct device *dev, struct clk *clk, { int ret; + /* We may reach here for devices which don't change frequency */ + if (IS_ERR(clk)) + return 0; + ret = clk_set_rate(clk, freq); if (ret) { dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, @@ -666,12 +749,12 @@ static inline int _generic_set_opp_clk_only(struct device *dev, struct clk *clk, static int _generic_set_opp_regulator(struct opp_table *opp_table, struct device *dev, - unsigned long old_freq, + struct dev_pm_opp *opp, unsigned long freq, - struct dev_pm_opp_supply *old_supply, - struct dev_pm_opp_supply *new_supply) + int scaling_down) { struct regulator *reg = opp_table->regulators[0]; + struct dev_pm_opp *old_opp = opp_table->current_opp; int ret; /* This function only supports single regulator per device */ @@ -681,8 +764,8 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, } /* Scaling up? Scale voltage before frequency */ - if (freq >= old_freq) { - ret = _set_opp_voltage(dev, reg, new_supply); + if (!scaling_down) { + ret = _set_opp_voltage(dev, reg, opp->supplies); if (ret) goto restore_voltage; } @@ -693,8 +776,8 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, goto restore_voltage; /* Scaling down? Scale voltage after frequency */ - if (freq < old_freq) { - ret = _set_opp_voltage(dev, reg, new_supply); + if (scaling_down) { + ret = _set_opp_voltage(dev, reg, opp->supplies); if (ret) goto restore_freq; } @@ -712,19 +795,18 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, return 0; restore_freq: - if (_generic_set_opp_clk_only(dev, opp_table->clk, old_freq)) + if (_generic_set_opp_clk_only(dev, opp_table->clk, old_opp->rate)) dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", - __func__, old_freq); + __func__, old_opp->rate); restore_voltage: /* This shouldn't harm even if the voltages weren't updated earlier */ - if (old_supply) - _set_opp_voltage(dev, reg, old_supply); + _set_opp_voltage(dev, reg, old_opp->supplies); return ret; } static int _set_opp_bw(const struct opp_table *opp_table, - struct dev_pm_opp *opp, struct device *dev, bool remove) + struct dev_pm_opp *opp, struct device *dev) { u32 avg, peak; int i, ret; @@ -733,7 +815,7 @@ static int _set_opp_bw(const struct opp_table *opp_table, return 0; for (i = 0; i < opp_table->path_count; i++) { - if (remove) { + if (!opp) { avg = 0; peak = 0; } else { @@ -743,7 +825,7 @@ static int _set_opp_bw(const struct opp_table *opp_table, ret = icc_set_bw(opp_table->paths[i], avg, peak); if (ret) { dev_err(dev, "Failed to %s bandwidth[%d]: %d\n", - remove ? "remove" : "set", i, ret); + opp ? "set" : "remove", i, ret); return ret; } } @@ -752,29 +834,31 @@ static int _set_opp_bw(const struct opp_table *opp_table, } static int _set_opp_custom(const struct opp_table *opp_table, - struct device *dev, unsigned long old_freq, - unsigned long freq, - struct dev_pm_opp_supply *old_supply, - struct dev_pm_opp_supply *new_supply) + struct device *dev, struct dev_pm_opp *opp, + unsigned long freq) { - struct dev_pm_set_opp_data *data; + struct dev_pm_set_opp_data *data = opp_table->set_opp_data; + struct dev_pm_opp *old_opp = opp_table->current_opp; int size; - data = opp_table->set_opp_data; + /* + * We support this only if dev_pm_opp_set_regulators() was called + * earlier. + */ + if (opp_table->sod_supplies) { + size = sizeof(*old_opp->supplies) * opp_table->regulator_count; + memcpy(data->old_opp.supplies, old_opp->supplies, size); + memcpy(data->new_opp.supplies, opp->supplies, size); + data->regulator_count = opp_table->regulator_count; + } else { + data->regulator_count = 0; + } + data->regulators = opp_table->regulators; - data->regulator_count = opp_table->regulator_count; data->clk = opp_table->clk; data->dev = dev; - - data->old_opp.rate = old_freq; - size = sizeof(*old_supply) * opp_table->regulator_count; - if (!old_supply) - memset(data->old_opp.supplies, 0, size); - else - memcpy(data->old_opp.supplies, old_supply, size); - + data->old_opp.rate = old_opp->rate; data->new_opp.rate = freq; - memcpy(data->new_opp.supplies, new_supply, size); return opp_table->set_opp(data); } @@ -809,6 +893,10 @@ static int _set_required_opps(struct device *dev, if (!required_opp_tables) return 0; + /* required-opps not fully initialized yet */ + if (lazy_linking_pending(opp_table)) + return -EBUSY; + /* Single genpd case */ if (!genpd_virt_devs) return _set_required_opp(dev, dev, opp, 0); @@ -841,38 +929,32 @@ static int _set_required_opps(struct device *dev, return ret; } -/** - * dev_pm_opp_set_bw() - sets bandwidth levels corresponding to an opp - * @dev: device for which we do this operation - * @opp: opp based on which the bandwidth levels are to be configured - * - * This configures the bandwidth to the levels specified by the OPP. However - * if the OPP specified is NULL the bandwidth levels are cleared out. - * - * Return: 0 on success or a negative error value. - */ -int dev_pm_opp_set_bw(struct device *dev, struct dev_pm_opp *opp) +static void _find_current_opp(struct device *dev, struct opp_table *opp_table) { - struct opp_table *opp_table; - int ret; + struct dev_pm_opp *opp = ERR_PTR(-ENODEV); + unsigned long freq; - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) { - dev_err(dev, "%s: device opp table doesn't exist\n", __func__); - return PTR_ERR(opp_table); + if (!IS_ERR(opp_table->clk)) { + freq = clk_get_rate(opp_table->clk); + opp = _find_freq_ceil(opp_table, &freq); } - if (opp) - ret = _set_opp_bw(opp_table, opp, dev, false); - else - ret = _set_opp_bw(opp_table, NULL, dev, true); + /* + * Unable to find the current OPP ? Pick the first from the list since + * it is in ascending order, otherwise rest of the code will need to + * make special checks to validate current_opp. + */ + if (IS_ERR(opp)) { + mutex_lock(&opp_table->lock); + opp = list_first_entry(&opp_table->opp_list, struct dev_pm_opp, node); + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); + } - dev_pm_opp_put_opp_table(opp_table); - return ret; + opp_table->current_opp = opp; } -EXPORT_SYMBOL_GPL(dev_pm_opp_set_bw); -static int _opp_set_rate_zero(struct device *dev, struct opp_table *opp_table) +static int _disable_opp_table(struct device *dev, struct opp_table *opp_table) { int ret; @@ -887,7 +969,7 @@ static int _opp_set_rate_zero(struct device *dev, struct opp_table *opp_table) if (!_get_opp_count(opp_table)) return 0; - ret = _set_opp_bw(opp_table, NULL, dev, true); + ret = _set_opp_bw(opp_table, NULL, dev); if (ret) return ret; @@ -900,6 +982,89 @@ static int _opp_set_rate_zero(struct device *dev, struct opp_table *opp_table) return ret; } +static int _set_opp(struct device *dev, struct opp_table *opp_table, + struct dev_pm_opp *opp, unsigned long freq) +{ + struct dev_pm_opp *old_opp; + int scaling_down, ret; + + if (unlikely(!opp)) + return _disable_opp_table(dev, opp_table); + + /* Find the currently set OPP if we don't know already */ + if (unlikely(!opp_table->current_opp)) + _find_current_opp(dev, opp_table); + + old_opp = opp_table->current_opp; + + /* Return early if nothing to do */ + if (opp_table->enabled && old_opp == opp) { + dev_dbg(dev, "%s: OPPs are same, nothing to do\n", __func__); + return 0; + } + + dev_dbg(dev, "%s: switching OPP: Freq %lu -> %lu Hz, Level %u -> %u, Bw %u -> %u\n", + __func__, old_opp->rate, freq, old_opp->level, opp->level, + old_opp->bandwidth ? old_opp->bandwidth[0].peak : 0, + opp->bandwidth ? opp->bandwidth[0].peak : 0); + + scaling_down = _opp_compare_key(old_opp, opp); + if (scaling_down == -1) + scaling_down = 0; + + /* Scaling up? Configure required OPPs before frequency */ + if (!scaling_down) { + ret = _set_required_opps(dev, opp_table, opp, true); + if (ret) { + dev_err(dev, "Failed to set required opps: %d\n", ret); + return ret; + } + + ret = _set_opp_bw(opp_table, opp, dev); + if (ret) { + dev_err(dev, "Failed to set bw: %d\n", ret); + return ret; + } + } + + if (opp_table->set_opp) { + ret = _set_opp_custom(opp_table, dev, opp, freq); + } else if (opp_table->regulators) { + ret = _generic_set_opp_regulator(opp_table, dev, opp, freq, + scaling_down); + } else { + /* Only frequency scaling */ + ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq); + } + + if (ret) + return ret; + + /* Scaling down? Configure required OPPs after frequency */ + if (scaling_down) { + ret = _set_opp_bw(opp_table, opp, dev); + if (ret) { + dev_err(dev, "Failed to set bw: %d\n", ret); + return ret; + } + + ret = _set_required_opps(dev, opp_table, opp, false); + if (ret) { + dev_err(dev, "Failed to set required opps: %d\n", ret); + return ret; + } + } + + opp_table->enabled = true; + dev_pm_opp_put(old_opp); + + /* Make sure current_opp doesn't get freed */ + dev_pm_opp_get(opp); + opp_table->current_opp = opp; + + return ret; +} + /** * dev_pm_opp_set_rate() - Configure new OPP based on frequency * @dev: device for which we do this operation @@ -914,118 +1079,85 @@ static int _opp_set_rate_zero(struct device *dev, struct opp_table *opp_table) int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { struct opp_table *opp_table; - unsigned long freq, old_freq, temp_freq; - struct dev_pm_opp *old_opp, *opp; - struct clk *clk; + unsigned long freq = 0, temp_freq; + struct dev_pm_opp *opp = NULL; int ret; opp_table = _find_opp_table(dev); if (IS_ERR(opp_table)) { - dev_err(dev, "%s: device opp doesn't exist\n", __func__); + dev_err(dev, "%s: device's opp table doesn't exist\n", __func__); return PTR_ERR(opp_table); } - if (unlikely(!target_freq)) { - ret = _opp_set_rate_zero(dev, opp_table); - goto put_opp_table; - } - - clk = opp_table->clk; - if (IS_ERR(clk)) { - dev_err(dev, "%s: No clock available for the device\n", - __func__); - ret = PTR_ERR(clk); - goto put_opp_table; - } - - freq = clk_round_rate(clk, target_freq); - if ((long)freq <= 0) - freq = target_freq; - - old_freq = clk_get_rate(clk); - - /* Return early if nothing to do */ - if (opp_table->enabled && old_freq == freq) { - dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n", - __func__, freq); - ret = 0; - goto put_opp_table; - } - - /* - * For IO devices which require an OPP on some platforms/SoCs - * while just needing to scale the clock on some others - * we look for empty OPP tables with just a clock handle and - * scale only the clk. This makes dev_pm_opp_set_rate() - * equivalent to a clk_set_rate() - */ - if (!_get_opp_count(opp_table)) { - ret = _generic_set_opp_clk_only(dev, clk, freq); - goto put_opp_table; - } + if (target_freq) { + /* + * For IO devices which require an OPP on some platforms/SoCs + * while just needing to scale the clock on some others + * we look for empty OPP tables with just a clock handle and + * scale only the clk. This makes dev_pm_opp_set_rate() + * equivalent to a clk_set_rate() + */ + if (!_get_opp_count(opp_table)) { + ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq); + goto put_opp_table; + } - temp_freq = old_freq; - old_opp = _find_freq_ceil(opp_table, &temp_freq); - if (IS_ERR(old_opp)) { - dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n", - __func__, old_freq, PTR_ERR(old_opp)); - } + freq = clk_round_rate(opp_table->clk, target_freq); + if ((long)freq <= 0) + freq = target_freq; - temp_freq = freq; - opp = _find_freq_ceil(opp_table, &temp_freq); - if (IS_ERR(opp)) { - ret = PTR_ERR(opp); - dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n", - __func__, freq, ret); - goto put_old_opp; + /* + * The clock driver may support finer resolution of the + * frequencies than the OPP table, don't update the frequency we + * pass to clk_set_rate() here. + */ + temp_freq = freq; + opp = _find_freq_ceil(opp_table, &temp_freq); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n", + __func__, freq, ret); + goto put_opp_table; + } } - dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__, - old_freq, freq); + ret = _set_opp(dev, opp_table, opp, freq); - /* Scaling up? Configure required OPPs before frequency */ - if (freq >= old_freq) { - ret = _set_required_opps(dev, opp_table, opp, true); - if (ret) - goto put_opp; - } - - if (opp_table->set_opp) { - ret = _set_opp_custom(opp_table, dev, old_freq, freq, - IS_ERR(old_opp) ? NULL : old_opp->supplies, - opp->supplies); - } else if (opp_table->regulators) { - ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq, - IS_ERR(old_opp) ? NULL : old_opp->supplies, - opp->supplies); - } else { - /* Only frequency scaling */ - ret = _generic_set_opp_clk_only(dev, clk, freq); - } + if (target_freq) + dev_pm_opp_put(opp); +put_opp_table: + dev_pm_opp_put_opp_table(opp_table); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate); - /* Scaling down? Configure required OPPs after frequency */ - if (!ret && freq < old_freq) { - ret = _set_required_opps(dev, opp_table, opp, false); - if (ret) - dev_err(dev, "Failed to set required opps: %d\n", ret); - } +/** + * dev_pm_opp_set_opp() - Configure device for OPP + * @dev: device for which we do this operation + * @opp: OPP to set to + * + * This configures the device based on the properties of the OPP passed to this + * routine. + * + * Return: 0 on success, a negative error number otherwise. + */ +int dev_pm_opp_set_opp(struct device *dev, struct dev_pm_opp *opp) +{ + struct opp_table *opp_table; + int ret; - if (!ret) { - ret = _set_opp_bw(opp_table, opp, dev, false); - if (!ret) - opp_table->enabled = true; + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + dev_err(dev, "%s: device opp doesn't exist\n", __func__); + return PTR_ERR(opp_table); } -put_opp: - dev_pm_opp_put(opp); -put_old_opp: - if (!IS_ERR(old_opp)) - dev_pm_opp_put(old_opp); -put_opp_table: + ret = _set_opp(dev, opp_table, opp, opp ? opp->rate : 0); dev_pm_opp_put_opp_table(opp_table); + return ret; } -EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate); +EXPORT_SYMBOL_GPL(dev_pm_opp_set_opp); /* OPP-dev Helpers */ static void _remove_opp_dev(struct opp_device *opp_dev, @@ -1075,6 +1207,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) mutex_init(&opp_table->lock); mutex_init(&opp_table->genpd_virt_dev_lock); INIT_LIST_HEAD(&opp_table->dev_list); + INIT_LIST_HEAD(&opp_table->lazy); /* Mark regulator count uninitialized */ opp_table->regulator_count = -1; @@ -1087,21 +1220,11 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) _of_init_opp_table(opp_table, dev, index); - /* Find clk for the device */ - opp_table->clk = clk_get(dev, NULL); - if (IS_ERR(opp_table->clk)) { - ret = PTR_ERR(opp_table->clk); - if (ret == -EPROBE_DEFER) - goto remove_opp_dev; - - dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret); - } - /* Find interconnect path(s) for the device */ ret = dev_pm_opp_of_find_icc_paths(dev, opp_table); if (ret) { if (ret == -EPROBE_DEFER) - goto put_clk; + goto remove_opp_dev; dev_warn(dev, "%s: Error finding interconnect paths: %d\n", __func__, ret); @@ -1113,9 +1236,6 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) return opp_table; -put_clk: - if (!IS_ERR(opp_table->clk)) - clk_put(opp_table->clk); remove_opp_dev: _remove_opp_dev(opp_dev, opp_table); err: @@ -1128,6 +1248,37 @@ void _get_opp_table_kref(struct opp_table *opp_table) kref_get(&opp_table->kref); } +static struct opp_table *_update_opp_table_clk(struct device *dev, + struct opp_table *opp_table, + bool getclk) +{ + int ret; + + /* + * Return early if we don't need to get clk or we have already tried it + * earlier. + */ + if (!getclk || IS_ERR(opp_table) || opp_table->clk) + return opp_table; + + /* Find clk for the device */ + opp_table->clk = clk_get(dev, NULL); + + ret = PTR_ERR_OR_ZERO(opp_table->clk); + if (!ret) + return opp_table; + + if (ret == -ENOENT) { + dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret); + return opp_table; + } + + dev_pm_opp_put_opp_table(opp_table); + dev_err_probe(dev, ret, "Couldn't find clock\n"); + + return ERR_PTR(ret); +} + /* * We need to make sure that the OPP table for a device doesn't get added twice, * if this routine gets called in parallel with the same device pointer. @@ -1143,7 +1294,8 @@ void _get_opp_table_kref(struct opp_table *opp_table) * uses the opp_tables_busy flag to indicate if another creator is in the middle * of adding an OPP table and others should wait for it to finish. */ -struct opp_table *_add_opp_table_indexed(struct device *dev, int index) +struct opp_table *_add_opp_table_indexed(struct device *dev, int index, + bool getclk) { struct opp_table *opp_table; @@ -1190,12 +1342,12 @@ again: unlock: mutex_unlock(&opp_table_lock); - return opp_table; + return _update_opp_table_clk(dev, opp_table, getclk); } -struct opp_table *_add_opp_table(struct device *dev) +static struct opp_table *_add_opp_table(struct device *dev, bool getclk) { - return _add_opp_table_indexed(dev, 0); + return _add_opp_table_indexed(dev, 0, getclk); } struct opp_table *dev_pm_opp_get_opp_table(struct device *dev) @@ -1214,6 +1366,9 @@ static void _opp_table_kref_release(struct kref *kref) list_del(&opp_table->node); mutex_unlock(&opp_table_lock); + if (opp_table->current_opp) + dev_pm_opp_put(opp_table->current_opp); + _of_clear_opp_table(opp_table); /* Release clk */ @@ -1508,6 +1663,21 @@ static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp, return 0; } +void _required_opps_available(struct dev_pm_opp *opp, int count) +{ + int i; + + for (i = 0; i < count; i++) { + if (opp->required_opps[i]->available) + continue; + + opp->available = false; + pr_warn("%s: OPP not supported by required OPP %pOF (%lu)\n", + __func__, opp->required_opps[i]->np, opp->rate); + return; + } +} + /* * Returns: * 0: On success. And appropriate error message for duplicate OPPs. @@ -1527,12 +1697,10 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, mutex_lock(&opp_table->lock); head = &opp_table->opp_list; - if (likely(!rate_not_available)) { - ret = _opp_is_duplicate(dev, new_opp, opp_table, &head); - if (ret) { - mutex_unlock(&opp_table->lock); - return ret; - } + ret = _opp_is_duplicate(dev, new_opp, opp_table, &head); + if (ret) { + mutex_unlock(&opp_table->lock); + return ret; } list_add(&new_opp->node, head); @@ -1549,6 +1717,12 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, __func__, new_opp->rate); } + /* required-opps not fully initialized yet */ + if (lazy_linking_pending(opp_table)) + return 0; + + _required_opps_available(new_opp, opp_table->required_opp_count); + return 0; } @@ -1631,7 +1805,7 @@ struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, { struct opp_table *opp_table; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -1693,7 +1867,7 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name) { struct opp_table *opp_table; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -1737,38 +1911,6 @@ void dev_pm_opp_put_prop_name(struct opp_table *opp_table) } EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name); -static int _allocate_set_opp_data(struct opp_table *opp_table) -{ - struct dev_pm_set_opp_data *data; - int len, count = opp_table->regulator_count; - - if (WARN_ON(!opp_table->regulators)) - return -EINVAL; - - /* space for set_opp_data */ - len = sizeof(*data); - - /* space for old_opp.supplies and new_opp.supplies */ - len += 2 * sizeof(struct dev_pm_opp_supply) * count; - - data = kzalloc(len, GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->old_opp.supplies = (void *)(data + 1); - data->new_opp.supplies = data->old_opp.supplies + count; - - opp_table->set_opp_data = data; - - return 0; -} - -static void _free_set_opp_data(struct opp_table *opp_table) -{ - kfree(opp_table->set_opp_data); - opp_table->set_opp_data = NULL; -} - /** * dev_pm_opp_set_regulators() - Set regulator names for the device * @dev: Device for which regulator name is being set. @@ -1785,11 +1927,12 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count) { + struct dev_pm_opp_supply *supplies; struct opp_table *opp_table; struct regulator *reg; int ret, i; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -1826,10 +1969,19 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev, opp_table->regulator_count = count; - /* Allocate block only once to pass to set_opp() routines */ - ret = _allocate_set_opp_data(opp_table); - if (ret) + supplies = kmalloc_array(count * 2, sizeof(*supplies), GFP_KERNEL); + if (!supplies) { + ret = -ENOMEM; goto free_regulators; + } + + mutex_lock(&opp_table->lock); + opp_table->sod_supplies = supplies; + if (opp_table->set_opp_data) { + opp_table->set_opp_data->old_opp.supplies = supplies; + opp_table->set_opp_data->new_opp.supplies = supplies + count; + } + mutex_unlock(&opp_table->lock); return opp_table; @@ -1872,7 +2024,15 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table) for (i = opp_table->regulator_count - 1; i >= 0; i--) regulator_put(opp_table->regulators[i]); - _free_set_opp_data(opp_table); + mutex_lock(&opp_table->lock); + if (opp_table->set_opp_data) { + opp_table->set_opp_data->old_opp.supplies = NULL; + opp_table->set_opp_data->new_opp.supplies = NULL; + } + + kfree(opp_table->sod_supplies); + opp_table->sod_supplies = NULL; + mutex_unlock(&opp_table->lock); kfree(opp_table->regulators); opp_table->regulators = NULL; @@ -1900,7 +2060,7 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) struct opp_table *opp_table; int ret; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -1910,9 +2070,11 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) goto err; } - /* Already have default clk set, free it */ - if (!IS_ERR(opp_table->clk)) - clk_put(opp_table->clk); + /* clk shouldn't be initialized at this point */ + if (WARN_ON(opp_table->clk)) { + ret = -EBUSY; + goto err; + } /* Find clk for the device */ opp_table->clk = clk_get(dev, name); @@ -1966,12 +2128,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)) { + struct dev_pm_set_opp_data *data; struct opp_table *opp_table; if (!set_opp) return ERR_PTR(-EINVAL); - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -1982,8 +2145,23 @@ struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, } /* Another CPU that shares the OPP table has set the helper ? */ - if (!opp_table->set_opp) - opp_table->set_opp = set_opp; + if (opp_table->set_opp) + return opp_table; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + + mutex_lock(&opp_table->lock); + opp_table->set_opp_data = data; + if (opp_table->sod_supplies) { + data->old_opp.supplies = opp_table->sod_supplies; + data->new_opp.supplies = opp_table->sod_supplies + + opp_table->regulator_count; + } + mutex_unlock(&opp_table->lock); + + opp_table->set_opp = set_opp; return opp_table; } @@ -2005,10 +2183,50 @@ void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table) WARN_ON(!list_empty(&opp_table->opp_list)); opp_table->set_opp = NULL; + + mutex_lock(&opp_table->lock); + kfree(opp_table->set_opp_data); + opp_table->set_opp_data = NULL; + mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); } EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_set_opp_helper); +static void devm_pm_opp_unregister_set_opp_helper(void *data) +{ + dev_pm_opp_unregister_set_opp_helper(data); +} + +/** + * devm_pm_opp_register_set_opp_helper() - Register custom set OPP helper + * @dev: Device for which the helper is getting registered. + * @set_opp: Custom set OPP helper. + * + * This is a resource-managed version of dev_pm_opp_register_set_opp_helper(). + * + * Return: pointer to 'struct opp_table' on success and errorno otherwise. + */ +struct opp_table * +devm_pm_opp_register_set_opp_helper(struct device *dev, + int (*set_opp)(struct dev_pm_set_opp_data *data)) +{ + struct opp_table *opp_table; + int err; + + opp_table = dev_pm_opp_register_set_opp_helper(dev, set_opp); + if (IS_ERR(opp_table)) + return opp_table; + + err = devm_add_action_or_reset(dev, devm_pm_opp_unregister_set_opp_helper, + opp_table); + if (err) + return ERR_PTR(err); + + return opp_table; +} +EXPORT_SYMBOL_GPL(devm_pm_opp_register_set_opp_helper); + static void _opp_detach_genpd(struct opp_table *opp_table) { int index; @@ -2058,7 +2276,7 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, int index = 0, ret = -EINVAL; const char **name = names; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) return opp_table; @@ -2144,6 +2362,97 @@ void dev_pm_opp_detach_genpd(struct opp_table *opp_table) } EXPORT_SYMBOL_GPL(dev_pm_opp_detach_genpd); +static void devm_pm_opp_detach_genpd(void *data) +{ + dev_pm_opp_detach_genpd(data); +} + +/** + * devm_pm_opp_attach_genpd - Attach genpd(s) for the device and save virtual + * device pointer + * @dev: Consumer device for which the genpd is getting attached. + * @names: Null terminated array of pointers containing names of genpd to attach. + * @virt_devs: Pointer to return the array of virtual devices. + * + * This is a resource-managed version of dev_pm_opp_attach_genpd(). + * + * Return: pointer to 'struct opp_table' on success and errorno otherwise. + */ +struct opp_table * +devm_pm_opp_attach_genpd(struct device *dev, const char **names, + struct device ***virt_devs) +{ + struct opp_table *opp_table; + int err; + + opp_table = dev_pm_opp_attach_genpd(dev, names, virt_devs); + if (IS_ERR(opp_table)) + return opp_table; + + err = devm_add_action_or_reset(dev, devm_pm_opp_detach_genpd, + opp_table); + if (err) + return ERR_PTR(err); + + return opp_table; +} +EXPORT_SYMBOL_GPL(devm_pm_opp_attach_genpd); + +/** + * dev_pm_opp_xlate_required_opp() - Find required OPP for @src_table OPP. + * @src_table: OPP table which has @dst_table as one of its required OPP table. + * @dst_table: Required OPP table of the @src_table. + * @src_opp: OPP from the @src_table. + * + * This function returns the OPP (present in @dst_table) pointed out by the + * "required-opps" property of the @src_opp (present in @src_table). + * + * The callers are required to call dev_pm_opp_put() for the returned OPP after + * use. + * + * Return: pointer to 'struct dev_pm_opp' on success and errorno otherwise. + */ +struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, + struct opp_table *dst_table, + struct dev_pm_opp *src_opp) +{ + struct dev_pm_opp *opp, *dest_opp = ERR_PTR(-ENODEV); + int i; + + if (!src_table || !dst_table || !src_opp || + !src_table->required_opp_tables) + return ERR_PTR(-EINVAL); + + /* required-opps not fully initialized yet */ + if (lazy_linking_pending(src_table)) + return ERR_PTR(-EBUSY); + + for (i = 0; i < src_table->required_opp_count; i++) { + if (src_table->required_opp_tables[i] == dst_table) { + mutex_lock(&src_table->lock); + + list_for_each_entry(opp, &src_table->opp_list, node) { + if (opp == src_opp) { + dest_opp = opp->required_opps[i]; + dev_pm_opp_get(dest_opp); + break; + } + } + + mutex_unlock(&src_table->lock); + break; + } + } + + if (IS_ERR(dest_opp)) { + pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, + src_table, dst_table); + } + + return dest_opp; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_xlate_required_opp); + /** * dev_pm_opp_xlate_performance_state() - Find required OPP's pstate for src_table. * @src_table: OPP table which has dst_table as one of its required OPP table. @@ -2172,9 +2481,13 @@ int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, * and so none of them have the "required-opps" property set. Return the * pstate of the src_table as it is in such cases. */ - if (!src_table->required_opp_count) + if (!src_table || !src_table->required_opp_count) return pstate; + /* required-opps not fully initialized yet */ + if (lazy_linking_pending(src_table)) + return -EBUSY; + for (i = 0; i < src_table->required_opp_count; i++) { if (src_table->required_opp_tables[i]->np == dst_table->np) break; @@ -2226,7 +2539,7 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) struct opp_table *opp_table; int ret; - opp_table = _add_opp_table(dev); + opp_table = _add_opp_table(dev, true); if (IS_ERR(opp_table)) return PTR_ERR(opp_table); @@ -2504,3 +2817,44 @@ void dev_pm_opp_remove_table(struct device *dev) dev_pm_opp_put_opp_table(opp_table); } EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table); + +/** + * dev_pm_opp_sync_regulators() - Sync state of voltage regulators + * @dev: device for which we do this operation + * + * Sync voltage state of the OPP table regulators. + * + * Return: 0 on success or a negative error value. + */ +int dev_pm_opp_sync_regulators(struct device *dev) +{ + struct opp_table *opp_table; + struct regulator *reg; + int i, ret = 0; + + /* Device may not have OPP table */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return 0; + + /* Regulator may not be required for the device */ + if (unlikely(!opp_table->regulators)) + goto put_table; + + /* Nothing to sync if voltage wasn't changed */ + if (!opp_table->enabled) + goto put_table; + + for (i = 0; i < opp_table->regulator_count; i++) { + reg = opp_table->regulators[i]; + ret = regulator_sync_voltage(reg); + if (ret) + break; + } +put_table: + /* Drop reference taken by _find_opp_table() */ + dev_pm_opp_put_opp_table(opp_table); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_sync_regulators); diff --git a/drivers/opp/of.c b/drivers/opp/of.c index 03cb387236c4..f480c10e6314 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -144,7 +144,7 @@ static void _opp_table_free_required_tables(struct opp_table *opp_table) for (i = 0; i < opp_table->required_opp_count; i++) { if (IS_ERR_OR_NULL(required_opp_tables[i])) - break; + continue; dev_pm_opp_put_opp_table(required_opp_tables[i]); } @@ -153,6 +153,7 @@ static void _opp_table_free_required_tables(struct opp_table *opp_table) opp_table->required_opp_count = 0; opp_table->required_opp_tables = NULL; + list_del(&opp_table->lazy); } /* @@ -165,6 +166,7 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table, { struct opp_table **required_opp_tables; struct device_node *required_np, *np; + bool lazy = false; int count, i; /* Traversing the first OPP node is all we need */ @@ -195,8 +197,10 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table, required_opp_tables[i] = _find_table_of_opp_np(required_np); of_node_put(required_np); - if (IS_ERR(required_opp_tables[i])) - goto free_required_tables; + if (IS_ERR(required_opp_tables[i])) { + lazy = true; + continue; + } /* * We only support genpd's OPPs in the "required-opps" for now, @@ -210,6 +214,10 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table, } } + /* Let's do the linking later on */ + if (lazy) + list_add(&opp_table->lazy, &lazy_opp_tables); + goto put_np; free_required_tables: @@ -278,14 +286,14 @@ void _of_opp_free_required_opps(struct opp_table *opp_table, for (i = 0; i < opp_table->required_opp_count; i++) { if (!required_opps[i]) - break; + continue; /* Put the reference back */ dev_pm_opp_put(required_opps[i]); } - kfree(required_opps); opp->required_opps = NULL; + kfree(required_opps); } /* Populate all required OPPs which are part of "required-opps" list */ @@ -309,6 +317,10 @@ static int _of_opp_alloc_required_opps(struct opp_table *opp_table, for (i = 0; i < count; i++) { required_table = opp_table->required_opp_tables[i]; + /* Required table not added yet, we will link later */ + if (IS_ERR_OR_NULL(required_table)) + continue; + np = of_parse_required_opp(opp->np, i); if (unlikely(!np)) { ret = -ENODEV; @@ -334,6 +346,104 @@ free_required_opps: return ret; } +/* Link required OPPs for an individual OPP */ +static int lazy_link_required_opps(struct opp_table *opp_table, + struct opp_table *new_table, int index) +{ + struct device_node *required_np; + struct dev_pm_opp *opp; + + list_for_each_entry(opp, &opp_table->opp_list, node) { + required_np = of_parse_required_opp(opp->np, index); + if (unlikely(!required_np)) + return -ENODEV; + + opp->required_opps[index] = _find_opp_of_np(new_table, required_np); + of_node_put(required_np); + + if (!opp->required_opps[index]) { + pr_err("%s: Unable to find required OPP node: %pOF (%d)\n", + __func__, opp->np, index); + return -ENODEV; + } + } + + return 0; +} + +/* Link required OPPs for all OPPs of the newly added OPP table */ +static void lazy_link_required_opp_table(struct opp_table *new_table) +{ + struct opp_table *opp_table, *temp, **required_opp_tables; + struct device_node *required_np, *opp_np, *required_table_np; + struct dev_pm_opp *opp; + int i, ret; + + /* + * We only support genpd's OPPs in the "required-opps" for now, + * as we don't know much about other cases. + */ + if (!new_table->is_genpd) + return; + + mutex_lock(&opp_table_lock); + + list_for_each_entry_safe(opp_table, temp, &lazy_opp_tables, lazy) { + bool lazy = false; + + /* opp_np can't be invalid here */ + opp_np = of_get_next_available_child(opp_table->np, NULL); + + for (i = 0; i < opp_table->required_opp_count; i++) { + required_opp_tables = opp_table->required_opp_tables; + + /* Required opp-table is already parsed */ + if (!IS_ERR(required_opp_tables[i])) + continue; + + /* required_np can't be invalid here */ + required_np = of_parse_required_opp(opp_np, i); + required_table_np = of_get_parent(required_np); + + of_node_put(required_table_np); + of_node_put(required_np); + + /* + * Newly added table isn't the required opp-table for + * opp_table. + */ + if (required_table_np != new_table->np) { + lazy = true; + continue; + } + + required_opp_tables[i] = new_table; + _get_opp_table_kref(new_table); + + /* Link OPPs now */ + ret = lazy_link_required_opps(opp_table, new_table, i); + if (ret) { + /* The OPPs will be marked unusable */ + lazy = false; + break; + } + } + + of_node_put(opp_np); + + /* All required opp-tables found, remove from lazy list */ + if (!lazy) { + list_del(&opp_table->lazy); + INIT_LIST_HEAD(&opp_table->lazy); + + list_for_each_entry(opp, &opp_table->opp_list, node) + _required_opps_available(opp, opp_table->required_opp_count); + } + } + + mutex_unlock(&opp_table_lock); +} + static int _bandwidth_supported(struct device *dev, struct opp_table *opp_table) { struct device_node *np, *opp_np; @@ -755,7 +865,6 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, struct device *dev, struct device_node *np) { struct dev_pm_opp *new_opp; - u64 rate = 0; u32 val; int ret; bool rate_not_available = false; @@ -772,7 +881,8 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, /* Check if the OPP supports hardware's hierarchy of versions or not */ if (!_opp_is_supported(dev, opp_table, np)) { - dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); + dev_dbg(dev, "OPP not supported by hardware: %lu\n", + new_opp->rate); goto free_opp; } @@ -822,10 +932,11 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; - pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu level:%u\n", __func__, new_opp->turbo, new_opp->rate, new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min, - new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns); + new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns, + new_opp->level); /* * Notify the changes in the availability of the operable @@ -888,6 +999,8 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table) } } + lazy_link_required_opp_table(opp_table); + return 0; remove_static_opp: @@ -956,29 +1069,23 @@ remove_static_opp: return ret; } -/** - * dev_pm_opp_of_add_table() - Initialize opp table from device tree - * @dev: device pointer used to lookup OPP table. - * - * Register the initial OPP table with the OPP library for given device. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -ENODEV when 'operating-points' property is not found or is invalid data - * in device node. - * -ENODATA when empty 'operating-points' property is found - * -EINVAL when invalid entries are found in opp-v2 table - */ -int dev_pm_opp_of_add_table(struct device *dev) +static int _of_add_table_indexed(struct device *dev, int index, bool getclk) { struct opp_table *opp_table; - int ret; + int ret, count; - opp_table = _add_opp_table_indexed(dev, 0); + if (index) { + /* + * If only one phandle is present, then the same OPP table + * applies for all index requests. + */ + count = of_count_phandle_with_args(dev->of_node, + "operating-points-v2", NULL); + if (count == 1) + index = 0; + } + + opp_table = _add_opp_table_indexed(dev, index, getclk); if (IS_ERR(opp_table)) return PTR_ERR(opp_table); @@ -996,15 +1103,12 @@ int dev_pm_opp_of_add_table(struct device *dev) return ret; } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); /** - * dev_pm_opp_of_add_table_indexed() - Initialize indexed opp table from device tree + * dev_pm_opp_of_add_table() - Initialize opp table from device tree * @dev: device pointer used to lookup OPP table. - * @index: Index number. * - * Register the initial OPP table with the OPP library for given device only - * using the "operating-points-v2" property. + * Register the initial OPP table with the OPP library for given device. * * Return: * 0 On success OR @@ -1017,34 +1121,46 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); * -ENODATA when empty 'operating-points' property is found * -EINVAL when invalid entries are found in opp-v2 table */ -int dev_pm_opp_of_add_table_indexed(struct device *dev, int index) +int dev_pm_opp_of_add_table(struct device *dev) { - struct opp_table *opp_table; - int ret, count; - - if (index) { - /* - * If only one phandle is present, then the same OPP table - * applies for all index requests. - */ - count = of_count_phandle_with_args(dev->of_node, - "operating-points-v2", NULL); - if (count == 1) - index = 0; - } - - opp_table = _add_opp_table_indexed(dev, index); - if (IS_ERR(opp_table)) - return PTR_ERR(opp_table); - - ret = _of_add_opp_table_v2(dev, opp_table); - if (ret) - dev_pm_opp_put_opp_table(opp_table); + return _of_add_table_indexed(dev, 0, true); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); - return ret; +/** + * dev_pm_opp_of_add_table_indexed() - Initialize indexed opp table from device tree + * @dev: device pointer used to lookup OPP table. + * @index: Index number. + * + * Register the initial OPP table with the OPP library for given device only + * using the "operating-points-v2" property. + * + * Return: Refer to dev_pm_opp_of_add_table() for return values. + */ +int dev_pm_opp_of_add_table_indexed(struct device *dev, int index) +{ + return _of_add_table_indexed(dev, index, true); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed); +/** + * dev_pm_opp_of_add_table_noclk() - Initialize indexed opp table from device + * tree without getting clk for device. + * @dev: device pointer used to lookup OPP table. + * @index: Index number. + * + * Register the initial OPP table with the OPP library for given device only + * using the "operating-points-v2" property. Do not try to get the clk for the + * device. + * + * Return: Refer to dev_pm_opp_of_add_table() for return values. + */ +int dev_pm_opp_of_add_table_noclk(struct device *dev, int index) +{ + return _of_add_table_indexed(dev, index, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_noclk); + /* CPU device specific helpers */ /** diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h index 4ced7ffa8158..9b9daf83b074 100644 --- a/drivers/opp/opp.h +++ b/drivers/opp/opp.h @@ -26,7 +26,7 @@ struct regulator; /* Lock to allow exclusive modification to the device and opp lists */ extern struct mutex opp_table_lock; -extern struct list_head opp_tables; +extern struct list_head opp_tables, lazy_opp_tables; /* * Internal data structure organization with the OPP layer library is as @@ -135,6 +135,7 @@ enum opp_table_access { * @clock_latency_ns_max: Max clock latency in nanoseconds. * @parsed_static_opps: Count of devices for which OPPs are initialized from DT. * @shared_opp: OPP is shared between multiple devices. + * @current_opp: Currently configured OPP for the table. * @suspend_opp: Pointer to OPP to be used during device suspend. * @genpd_virt_dev_lock: Mutex protecting the genpd virtual device pointers. * @genpd_virt_devs: List of virtual devices for multiple genpd support. @@ -155,6 +156,7 @@ enum opp_table_access { * @genpd_performance_state: Device's power domain support performance state. * @is_genpd: Marks if the OPP table belongs to a genpd. * @set_opp: Platform specific set_opp callback + * @sod_supplies: Set opp data supplies * @set_opp_data: Data to be passed to set_opp callback * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. @@ -166,7 +168,7 @@ enum opp_table_access { * meant for book keeping and private to OPP library. */ struct opp_table { - struct list_head node; + struct list_head node, lazy; struct blocking_notifier_head head; struct list_head dev_list; @@ -182,6 +184,7 @@ struct opp_table { unsigned int parsed_static_opps; enum opp_table_access shared_opp; + struct dev_pm_opp *current_opp; struct dev_pm_opp *suspend_opp; struct mutex genpd_virt_dev_lock; @@ -202,6 +205,7 @@ struct opp_table { bool is_genpd; int (*set_opp)(struct dev_pm_set_opp_data *data); + struct dev_pm_opp_supply *sod_supplies; struct dev_pm_set_opp_data *set_opp_data; #ifdef CONFIG_DEBUG_FS @@ -223,9 +227,14 @@ int _opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2); int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table, bool rate_not_available); int _opp_add_v1(struct opp_table *opp_table, struct device *dev, unsigned long freq, long u_volt, bool dynamic); void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, int last_cpu); -struct opp_table *_add_opp_table(struct device *dev); -struct opp_table *_add_opp_table_indexed(struct device *dev, int index); +struct opp_table *_add_opp_table_indexed(struct device *dev, int index, bool getclk); void _put_opp_list_kref(struct opp_table *opp_table); +void _required_opps_available(struct dev_pm_opp *opp, int count); + +static inline bool lazy_linking_pending(struct opp_table *opp_table) +{ + return unlikely(!list_empty(&opp_table->lazy)); +} #ifdef CONFIG_OF void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index); diff --git a/drivers/powercap/Kconfig b/drivers/powercap/Kconfig index bc228725346b..20b4325c6161 100644 --- a/drivers/powercap/Kconfig +++ b/drivers/powercap/Kconfig @@ -43,4 +43,17 @@ config IDLE_INJECT CPUs for power capping. Idle period can be injected synchronously on a set of specified CPUs or alternatively on a per CPU basis. + +config DTPM + bool "Power capping for Dynamic Thermal Power Management" + help + This enables support for the power capping for the dynamic + thermal power management userspace engine. + +config DTPM_CPU + bool "Add CPU power capping based on the energy model" + depends on DTPM && ENERGY_MODEL + help + This enables support for CPU power limitation based on + energy model. endif diff --git a/drivers/powercap/Makefile b/drivers/powercap/Makefile index 7255c94ec61c..fabcf388a8d3 100644 --- a/drivers/powercap/Makefile +++ b/drivers/powercap/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_DTPM) += dtpm.o +obj-$(CONFIG_DTPM_CPU) += dtpm_cpu.o obj-$(CONFIG_POWERCAP) += powercap_sys.o obj-$(CONFIG_INTEL_RAPL_CORE) += intel_rapl_common.o obj-$(CONFIG_INTEL_RAPL) += intel_rapl_msr.o diff --git a/drivers/powercap/dtpm.c b/drivers/powercap/dtpm.c new file mode 100644 index 000000000000..5a51cd34a7e8 --- /dev/null +++ b/drivers/powercap/dtpm.c @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2020 Linaro Limited + * + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> + * + * The powercap based Dynamic Thermal Power Management framework + * provides to the userspace a consistent API to set the power limit + * on some devices. + * + * DTPM defines the functions to create a tree of constraints. Each + * parent node is a virtual description of the aggregation of the + * children. It propagates the constraints set at its level to its + * children and collect the children power information. The leaves of + * the tree are the real devices which have the ability to get their + * current power consumption and set their power limit. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dtpm.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/powercap.h> +#include <linux/slab.h> +#include <linux/mutex.h> + +#define DTPM_POWER_LIMIT_FLAG 0 + +static const char *constraint_name[] = { + "Instantaneous", +}; + +static DEFINE_MUTEX(dtpm_lock); +static struct powercap_control_type *pct; +static struct dtpm *root; + +static int get_time_window_us(struct powercap_zone *pcz, int cid, u64 *window) +{ + return -ENOSYS; +} + +static int set_time_window_us(struct powercap_zone *pcz, int cid, u64 window) +{ + return -ENOSYS; +} + +static int get_max_power_range_uw(struct powercap_zone *pcz, u64 *max_power_uw) +{ + struct dtpm *dtpm = to_dtpm(pcz); + + mutex_lock(&dtpm_lock); + *max_power_uw = dtpm->power_max - dtpm->power_min; + mutex_unlock(&dtpm_lock); + + return 0; +} + +static int __get_power_uw(struct dtpm *dtpm, u64 *power_uw) +{ + struct dtpm *child; + u64 power; + int ret = 0; + + if (dtpm->ops) { + *power_uw = dtpm->ops->get_power_uw(dtpm); + return 0; + } + + *power_uw = 0; + + list_for_each_entry(child, &dtpm->children, sibling) { + ret = __get_power_uw(child, &power); + if (ret) + break; + *power_uw += power; + } + + return ret; +} + +static int get_power_uw(struct powercap_zone *pcz, u64 *power_uw) +{ + struct dtpm *dtpm = to_dtpm(pcz); + int ret; + + mutex_lock(&dtpm_lock); + ret = __get_power_uw(dtpm, power_uw); + mutex_unlock(&dtpm_lock); + + return ret; +} + +static void __dtpm_rebalance_weight(struct dtpm *dtpm) +{ + struct dtpm *child; + + list_for_each_entry(child, &dtpm->children, sibling) { + + pr_debug("Setting weight '%d' for '%s'\n", + child->weight, child->zone.name); + + child->weight = DIV64_U64_ROUND_CLOSEST( + child->power_max * 1024, dtpm->power_max); + + __dtpm_rebalance_weight(child); + } +} + +static void __dtpm_sub_power(struct dtpm *dtpm) +{ + struct dtpm *parent = dtpm->parent; + + while (parent) { + parent->power_min -= dtpm->power_min; + parent->power_max -= dtpm->power_max; + parent->power_limit -= dtpm->power_limit; + parent = parent->parent; + } + + __dtpm_rebalance_weight(root); +} + +static void __dtpm_add_power(struct dtpm *dtpm) +{ + struct dtpm *parent = dtpm->parent; + + while (parent) { + parent->power_min += dtpm->power_min; + parent->power_max += dtpm->power_max; + parent->power_limit += dtpm->power_limit; + parent = parent->parent; + } + + __dtpm_rebalance_weight(root); +} + +/** + * dtpm_update_power - Update the power on the dtpm + * @dtpm: a pointer to a dtpm structure to update + * @power_min: a u64 representing the new power_min value + * @power_max: a u64 representing the new power_max value + * + * Function to update the power values of the dtpm node specified in + * parameter. These new values will be propagated to the tree. + * + * Return: zero on success, -EINVAL if the values are inconsistent + */ +int dtpm_update_power(struct dtpm *dtpm, u64 power_min, u64 power_max) +{ + int ret = 0; + + mutex_lock(&dtpm_lock); + + if (power_min == dtpm->power_min && power_max == dtpm->power_max) + goto unlock; + + if (power_max < power_min) { + ret = -EINVAL; + goto unlock; + } + + __dtpm_sub_power(dtpm); + + dtpm->power_min = power_min; + dtpm->power_max = power_max; + if (!test_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags)) + dtpm->power_limit = power_max; + + __dtpm_add_power(dtpm); + +unlock: + mutex_unlock(&dtpm_lock); + + return ret; +} + +/** + * dtpm_release_zone - Cleanup when the node is released + * @pcz: a pointer to a powercap_zone structure + * + * Do some housecleaning and update the weight on the tree. The + * release will be denied if the node has children. This function must + * be called by the specific release callback of the different + * backends. + * + * Return: 0 on success, -EBUSY if there are children + */ +int dtpm_release_zone(struct powercap_zone *pcz) +{ + struct dtpm *dtpm = to_dtpm(pcz); + struct dtpm *parent = dtpm->parent; + + mutex_lock(&dtpm_lock); + + if (!list_empty(&dtpm->children)) { + mutex_unlock(&dtpm_lock); + return -EBUSY; + } + + if (parent) + list_del(&dtpm->sibling); + + __dtpm_sub_power(dtpm); + + mutex_unlock(&dtpm_lock); + + if (dtpm->ops) + dtpm->ops->release(dtpm); + + kfree(dtpm); + + return 0; +} + +static int __get_power_limit_uw(struct dtpm *dtpm, int cid, u64 *power_limit) +{ + *power_limit = dtpm->power_limit; + return 0; +} + +static int get_power_limit_uw(struct powercap_zone *pcz, + int cid, u64 *power_limit) +{ + struct dtpm *dtpm = to_dtpm(pcz); + int ret; + + mutex_lock(&dtpm_lock); + ret = __get_power_limit_uw(dtpm, cid, power_limit); + mutex_unlock(&dtpm_lock); + + return ret; +} + +/* + * Set the power limit on the nodes, the power limit is distributed + * given the weight of the children. + * + * The dtpm node lock must be held when calling this function. + */ +static int __set_power_limit_uw(struct dtpm *dtpm, int cid, u64 power_limit) +{ + struct dtpm *child; + int ret = 0; + u64 power; + + /* + * A max power limitation means we remove the power limit, + * otherwise we set a constraint and flag the dtpm node. + */ + if (power_limit == dtpm->power_max) { + clear_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags); + } else { + set_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags); + } + + pr_debug("Setting power limit for '%s': %llu uW\n", + dtpm->zone.name, power_limit); + + /* + * Only leaves of the dtpm tree has ops to get/set the power + */ + if (dtpm->ops) { + dtpm->power_limit = dtpm->ops->set_power_uw(dtpm, power_limit); + } else { + dtpm->power_limit = 0; + + list_for_each_entry(child, &dtpm->children, sibling) { + + /* + * Integer division rounding will inevitably + * lead to a different min or max value when + * set several times. In order to restore the + * initial value, we force the child's min or + * max power every time if the constraint is + * at the boundaries. + */ + if (power_limit == dtpm->power_max) { + power = child->power_max; + } else if (power_limit == dtpm->power_min) { + power = child->power_min; + } else { + power = DIV_ROUND_CLOSEST_ULL( + power_limit * child->weight, 1024); + } + + pr_debug("Setting power limit for '%s': %llu uW\n", + child->zone.name, power); + + ret = __set_power_limit_uw(child, cid, power); + if (!ret) + ret = __get_power_limit_uw(child, cid, &power); + + if (ret) + break; + + dtpm->power_limit += power; + } + } + + return ret; +} + +static int set_power_limit_uw(struct powercap_zone *pcz, + int cid, u64 power_limit) +{ + struct dtpm *dtpm = to_dtpm(pcz); + int ret; + + mutex_lock(&dtpm_lock); + + /* + * Don't allow values outside of the power range previously + * set when initializing the power numbers. + */ + power_limit = clamp_val(power_limit, dtpm->power_min, dtpm->power_max); + + ret = __set_power_limit_uw(dtpm, cid, power_limit); + + pr_debug("%s: power limit: %llu uW, power max: %llu uW\n", + dtpm->zone.name, dtpm->power_limit, dtpm->power_max); + + mutex_unlock(&dtpm_lock); + + return ret; +} + +static const char *get_constraint_name(struct powercap_zone *pcz, int cid) +{ + return constraint_name[cid]; +} + +static int get_max_power_uw(struct powercap_zone *pcz, int id, u64 *max_power) +{ + struct dtpm *dtpm = to_dtpm(pcz); + + mutex_lock(&dtpm_lock); + *max_power = dtpm->power_max; + mutex_unlock(&dtpm_lock); + + return 0; +} + +static struct powercap_zone_constraint_ops constraint_ops = { + .set_power_limit_uw = set_power_limit_uw, + .get_power_limit_uw = get_power_limit_uw, + .set_time_window_us = set_time_window_us, + .get_time_window_us = get_time_window_us, + .get_max_power_uw = get_max_power_uw, + .get_name = get_constraint_name, +}; + +static struct powercap_zone_ops zone_ops = { + .get_max_power_range_uw = get_max_power_range_uw, + .get_power_uw = get_power_uw, + .release = dtpm_release_zone, +}; + +/** + * dtpm_alloc - Allocate and initialize a dtpm struct + * @name: a string specifying the name of the node + * + * Return: a struct dtpm pointer, NULL in case of error + */ +struct dtpm *dtpm_alloc(struct dtpm_ops *ops) +{ + struct dtpm *dtpm; + + dtpm = kzalloc(sizeof(*dtpm), GFP_KERNEL); + if (dtpm) { + INIT_LIST_HEAD(&dtpm->children); + INIT_LIST_HEAD(&dtpm->sibling); + dtpm->weight = 1024; + dtpm->ops = ops; + } + + return dtpm; +} + +/** + * dtpm_unregister - Unregister a dtpm node from the hierarchy tree + * @dtpm: a pointer to a dtpm structure corresponding to the node to be removed + * + * Call the underlying powercap unregister function. That will call + * the release callback of the powercap zone. + */ +void dtpm_unregister(struct dtpm *dtpm) +{ + powercap_unregister_zone(pct, &dtpm->zone); + + pr_info("Unregistered dtpm node '%s'\n", dtpm->zone.name); +} + +/** + * dtpm_register - Register a dtpm node in the hierarchy tree + * @name: a string specifying the name of the node + * @dtpm: a pointer to a dtpm structure corresponding to the new node + * @parent: a pointer to a dtpm structure corresponding to the parent node + * + * Create a dtpm node in the tree. If no parent is specified, the node + * is the root node of the hierarchy. If the root node already exists, + * then the registration will fail. The powercap controller must be + * initialized before calling this function. + * + * The dtpm structure must be initialized with the power numbers + * before calling this function. + * + * Return: zero on success, a negative value in case of error: + * -EAGAIN: the function is called before the framework is initialized. + * -EBUSY: the root node is already inserted + * -EINVAL: * there is no root node yet and @parent is specified + * * no all ops are defined + * * parent have ops which are reserved for leaves + * Other negative values are reported back from the powercap framework + */ +int dtpm_register(const char *name, struct dtpm *dtpm, struct dtpm *parent) +{ + struct powercap_zone *pcz; + + if (!pct) + return -EAGAIN; + + if (root && !parent) + return -EBUSY; + + if (!root && parent) + return -EINVAL; + + if (parent && parent->ops) + return -EINVAL; + + if (!dtpm) + return -EINVAL; + + if (dtpm->ops && !(dtpm->ops->set_power_uw && + dtpm->ops->get_power_uw && + dtpm->ops->release)) + return -EINVAL; + + pcz = powercap_register_zone(&dtpm->zone, pct, name, + parent ? &parent->zone : NULL, + &zone_ops, MAX_DTPM_CONSTRAINTS, + &constraint_ops); + if (IS_ERR(pcz)) + return PTR_ERR(pcz); + + mutex_lock(&dtpm_lock); + + if (parent) { + list_add_tail(&dtpm->sibling, &parent->children); + dtpm->parent = parent; + } else { + root = dtpm; + } + + __dtpm_add_power(dtpm); + + pr_info("Registered dtpm node '%s' / %llu-%llu uW, \n", + dtpm->zone.name, dtpm->power_min, dtpm->power_max); + + mutex_unlock(&dtpm_lock); + + return 0; +} + +static int __init dtpm_init(void) +{ + struct dtpm_descr **dtpm_descr; + + pct = powercap_register_control_type(NULL, "dtpm", NULL); + if (IS_ERR(pct)) { + pr_err("Failed to register control type\n"); + return PTR_ERR(pct); + } + + for_each_dtpm_table(dtpm_descr) + (*dtpm_descr)->init(*dtpm_descr); + + return 0; +} +late_initcall(dtpm_init); diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c new file mode 100644 index 000000000000..51c366938acd --- /dev/null +++ b/drivers/powercap/dtpm_cpu.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2020 Linaro Limited + * + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> + * + * The DTPM CPU is based on the energy model. It hooks the CPU in the + * DTPM tree which in turns update the power number by propagating the + * power number from the CPU energy model information to the parents. + * + * The association between the power and the performance state, allows + * to set the power of the CPU at the OPP granularity. + * + * The CPU hotplug is supported and the power numbers will be updated + * if a CPU is hot plugged / unplugged. + */ +#include <linux/cpumask.h> +#include <linux/cpufreq.h> +#include <linux/cpuhotplug.h> +#include <linux/dtpm.h> +#include <linux/energy_model.h> +#include <linux/pm_qos.h> +#include <linux/slab.h> +#include <linux/units.h> + +static struct dtpm *__parent; + +static DEFINE_PER_CPU(struct dtpm *, dtpm_per_cpu); + +struct dtpm_cpu { + struct freq_qos_request qos_req; + int cpu; +}; + +/* + * When a new CPU is inserted at hotplug or boot time, add the power + * contribution and update the dtpm tree. + */ +static int power_add(struct dtpm *dtpm, struct em_perf_domain *em) +{ + u64 power_min, power_max; + + power_min = em->table[0].power; + power_min *= MICROWATT_PER_MILLIWATT; + power_min += dtpm->power_min; + + power_max = em->table[em->nr_perf_states - 1].power; + power_max *= MICROWATT_PER_MILLIWATT; + power_max += dtpm->power_max; + + return dtpm_update_power(dtpm, power_min, power_max); +} + +/* + * When a CPU is unplugged, remove its power contribution from the + * dtpm tree. + */ +static int power_sub(struct dtpm *dtpm, struct em_perf_domain *em) +{ + u64 power_min, power_max; + + power_min = em->table[0].power; + power_min *= MICROWATT_PER_MILLIWATT; + power_min = dtpm->power_min - power_min; + + power_max = em->table[em->nr_perf_states - 1].power; + power_max *= MICROWATT_PER_MILLIWATT; + power_max = dtpm->power_max - power_max; + + return dtpm_update_power(dtpm, power_min, power_max); +} + +static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit) +{ + struct dtpm_cpu *dtpm_cpu = dtpm->private; + struct em_perf_domain *pd; + struct cpumask cpus; + unsigned long freq; + u64 power; + int i, nr_cpus; + + pd = em_cpu_get(dtpm_cpu->cpu); + + cpumask_and(&cpus, cpu_online_mask, to_cpumask(pd->cpus)); + + nr_cpus = cpumask_weight(&cpus); + + for (i = 0; i < pd->nr_perf_states; i++) { + + power = pd->table[i].power * MICROWATT_PER_MILLIWATT * nr_cpus; + + if (power > power_limit) + break; + } + + freq = pd->table[i - 1].frequency; + + freq_qos_update_request(&dtpm_cpu->qos_req, freq); + + power_limit = pd->table[i - 1].power * + MICROWATT_PER_MILLIWATT * nr_cpus; + + return power_limit; +} + +static u64 get_pd_power_uw(struct dtpm *dtpm) +{ + struct dtpm_cpu *dtpm_cpu = dtpm->private; + struct em_perf_domain *pd; + struct cpumask cpus; + unsigned long freq; + int i, nr_cpus; + + pd = em_cpu_get(dtpm_cpu->cpu); + freq = cpufreq_quick_get(dtpm_cpu->cpu); + cpumask_and(&cpus, cpu_online_mask, to_cpumask(pd->cpus)); + nr_cpus = cpumask_weight(&cpus); + + for (i = 0; i < pd->nr_perf_states; i++) { + + if (pd->table[i].frequency < freq) + continue; + + return pd->table[i].power * + MICROWATT_PER_MILLIWATT * nr_cpus; + } + + return 0; +} + +static void pd_release(struct dtpm *dtpm) +{ + struct dtpm_cpu *dtpm_cpu = dtpm->private; + + if (freq_qos_request_active(&dtpm_cpu->qos_req)) + freq_qos_remove_request(&dtpm_cpu->qos_req); + + kfree(dtpm_cpu); +} + +static struct dtpm_ops dtpm_ops = { + .set_power_uw = set_pd_power_limit, + .get_power_uw = get_pd_power_uw, + .release = pd_release, +}; + +static int cpuhp_dtpm_cpu_offline(unsigned int cpu) +{ + struct cpufreq_policy *policy; + struct em_perf_domain *pd; + struct dtpm *dtpm; + + policy = cpufreq_cpu_get(cpu); + + if (!policy) + return 0; + + pd = em_cpu_get(cpu); + if (!pd) + return -EINVAL; + + dtpm = per_cpu(dtpm_per_cpu, cpu); + + power_sub(dtpm, pd); + + if (cpumask_weight(policy->cpus) != 1) + return 0; + + for_each_cpu(cpu, policy->related_cpus) + per_cpu(dtpm_per_cpu, cpu) = NULL; + + dtpm_unregister(dtpm); + + return 0; +} + +static int cpuhp_dtpm_cpu_online(unsigned int cpu) +{ + struct dtpm *dtpm; + struct dtpm_cpu *dtpm_cpu; + struct cpufreq_policy *policy; + struct em_perf_domain *pd; + char name[CPUFREQ_NAME_LEN]; + int ret = -ENOMEM; + + policy = cpufreq_cpu_get(cpu); + + if (!policy) + return 0; + + pd = em_cpu_get(cpu); + if (!pd) + return -EINVAL; + + dtpm = per_cpu(dtpm_per_cpu, cpu); + if (dtpm) + return power_add(dtpm, pd); + + dtpm = dtpm_alloc(&dtpm_ops); + if (!dtpm) + return -EINVAL; + + dtpm_cpu = kzalloc(sizeof(*dtpm_cpu), GFP_KERNEL); + if (!dtpm_cpu) + goto out_kfree_dtpm; + + dtpm->private = dtpm_cpu; + dtpm_cpu->cpu = cpu; + + for_each_cpu(cpu, policy->related_cpus) + per_cpu(dtpm_per_cpu, cpu) = dtpm; + + sprintf(name, "cpu%d", dtpm_cpu->cpu); + + ret = dtpm_register(name, dtpm, __parent); + if (ret) + goto out_kfree_dtpm_cpu; + + ret = power_add(dtpm, pd); + if (ret) + goto out_dtpm_unregister; + + ret = freq_qos_add_request(&policy->constraints, + &dtpm_cpu->qos_req, FREQ_QOS_MAX, + pd->table[pd->nr_perf_states - 1].frequency); + if (ret) + goto out_power_sub; + + return 0; + +out_power_sub: + power_sub(dtpm, pd); + +out_dtpm_unregister: + dtpm_unregister(dtpm); + dtpm_cpu = NULL; + dtpm = NULL; + +out_kfree_dtpm_cpu: + for_each_cpu(cpu, policy->related_cpus) + per_cpu(dtpm_per_cpu, cpu) = NULL; + kfree(dtpm_cpu); + +out_kfree_dtpm: + kfree(dtpm); + return ret; +} + +int dtpm_register_cpu(struct dtpm *parent) +{ + __parent = parent; + + return cpuhp_setup_state(CPUHP_AP_DTPM_CPU_ONLINE, + "dtpm_cpu:online", + cpuhp_dtpm_cpu_online, + cpuhp_dtpm_cpu_offline); +} diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c index c9e57237d778..fdda2a737186 100644 --- a/drivers/powercap/intel_rapl_common.c +++ b/drivers/powercap/intel_rapl_common.c @@ -547,7 +547,7 @@ static void rapl_init_domains(struct rapl_package *rp) if (i == RAPL_DOMAIN_PLATFORM && rp->id > 0) { snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "psys-%d", - cpu_data(rp->lead_cpu).phys_proc_id); + topology_physical_package_id(rp->lead_cpu)); } else snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "%s", rapl_domain_names[i]); @@ -1049,6 +1049,7 @@ static const struct x86_cpu_id rapl_ids[] __initconst = { X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, &rapl_defaults_core), X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE, &rapl_defaults_core), X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &rapl_defaults_core), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, &rapl_defaults_core), X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &rapl_defaults_spr_server), X86_MATCH_INTEL_FAM6_MODEL(LAKEFIELD, &rapl_defaults_core), @@ -1309,7 +1310,6 @@ struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv) { int id = topology_logical_die_id(cpu); struct rapl_package *rp; - struct cpuinfo_x86 *c = &cpu_data(cpu); int ret; if (!rapl_defaults) @@ -1326,10 +1326,11 @@ struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv) if (topology_max_die_per_package() > 1) snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, - "package-%d-die-%d", c->phys_proc_id, c->cpu_die_id); + "package-%d-die-%d", + topology_physical_package_id(cpu), topology_die_id(cpu)); else snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d", - c->phys_proc_id); + topology_physical_package_id(cpu)); /* check if the package contains valid domains */ if (rapl_detect_domains(rp, cpu) || rapl_defaults->check_unit(rp, cpu)) { diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index b97c628ad91f..52dbd58f6810 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -316,6 +316,16 @@ #define THERMAL_TABLE(name) #endif +#ifdef CONFIG_DTPM +#define DTPM_TABLE() \ + . = ALIGN(8); \ + __dtpm_table = .; \ + KEEP(*(__dtpm_table)) \ + __dtpm_table_end = .; +#else +#define DTPM_TABLE() +#endif + #define KERNEL_DTB() \ STRUCT_ALIGN(); \ __dtb_start = .; \ @@ -733,6 +743,7 @@ ACPI_PROBE_TABLE(irqchip) \ ACPI_PROBE_TABLE(timer) \ THERMAL_TABLE(governor) \ + DTPM_TABLE() \ EARLYCON_TABLE() \ LSM_TABLE() \ EARLY_LSM_TABLE() \ diff --git a/include/linux/clk.h b/include/linux/clk.h index 31ff1bf1b79f..a4a86aa8b11a 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -238,6 +238,7 @@ static inline bool clk_is_match(const struct clk *p, const struct clk *q) #endif +#ifdef CONFIG_HAVE_CLK_PREPARE /** * clk_prepare - prepare a clock source * @clk: clock source @@ -246,10 +247,26 @@ static inline bool clk_is_match(const struct clk *p, const struct clk *q) * * Must not be called from within atomic context. */ -#ifdef CONFIG_HAVE_CLK_PREPARE int clk_prepare(struct clk *clk); int __must_check clk_bulk_prepare(int num_clks, const struct clk_bulk_data *clks); + +/** + * clk_is_enabled_when_prepared - indicate if preparing a clock also enables it. + * @clk: clock source + * + * Returns true if clk_prepare() implicitly enables the clock, effectively + * making clk_enable()/clk_disable() no-ops, false otherwise. + * + * This is of interest mainly to the power management code where actually + * disabling the clock also requires unpreparing it to have any material + * effect. + * + * Regardless of the value returned here, the caller must always invoke + * clk_enable() or clk_prepare_enable() and counterparts for usage counts + * to be right. + */ +bool clk_is_enabled_when_prepared(struct clk *clk); #else static inline int clk_prepare(struct clk *clk) { @@ -263,6 +280,11 @@ clk_bulk_prepare(int num_clks, const struct clk_bulk_data *clks) might_sleep(); return 0; } + +static inline bool clk_is_enabled_when_prepared(struct clk *clk) +{ + return false; +} #endif /** diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 9c8b7437b6cd..353969c7acd3 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -387,14 +387,22 @@ struct cpufreq_driver { /* flags */ -/* driver isn't removed even if all ->init() calls failed */ -#define CPUFREQ_STICKY BIT(0) +/* + * Set by drivers that need to update internale upper and lower boundaries along + * with the target frequency and so the core and governors should also invoke + * the diver if the target frequency does not change, but the policy min or max + * may have changed. + */ +#define CPUFREQ_NEED_UPDATE_LIMITS BIT(0) /* loops_per_jiffy or other kernel "constants" aren't affected by frequency transitions */ #define CPUFREQ_CONST_LOOPS BIT(1) -/* don't warn on suspend/resume speed mismatches */ -#define CPUFREQ_PM_NO_WARN BIT(2) +/* + * Set by drivers that want the core to automatically register the cpufreq + * driver as a thermal cooling device. + */ +#define CPUFREQ_IS_COOLING_DEV BIT(2) /* * This should be set by platforms having multiple clock-domains, i.e. @@ -426,20 +434,6 @@ struct cpufreq_driver { */ #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING BIT(6) -/* - * Set by drivers that want the core to automatically register the cpufreq - * driver as a thermal cooling device. - */ -#define CPUFREQ_IS_COOLING_DEV BIT(7) - -/* - * Set by drivers that need to update internale upper and lower boundaries along - * with the target frequency and so the core and governors should also invoke - * the diver if the target frequency does not change, but the policy min or max - * may have changed. - */ -#define CPUFREQ_NEED_UPDATE_LIMITS BIT(8) - int cpufreq_register_driver(struct cpufreq_driver *driver_data); int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 0042ef362511..ee09a39627d6 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -193,6 +193,7 @@ enum cpuhp_state { CPUHP_AP_ONLINE_DYN_END = CPUHP_AP_ONLINE_DYN + 30, CPUHP_AP_X86_HPET_ONLINE, CPUHP_AP_X86_KVM_CLK_ONLINE, + CPUHP_AP_DTPM_CPU_ONLINE, CPUHP_AP_ACTIVE, CPUHP_ONLINE, }; diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index b6d3bae1c74d..26ea0850be9b 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -137,6 +137,7 @@ struct devfreq_stats { * using devfreq. * @profile: device-specific devfreq profile * @governor: method how to choose frequency based on the usage. + * @opp_table: Reference to OPP table of dev.parent, if one exists. * @nb: notifier block used to notify devfreq object that it should * reevaluate operable frequencies. Devfreq users may use * devfreq.nb to the corresponding register notifier call chain. @@ -173,6 +174,7 @@ struct devfreq { struct device dev; struct devfreq_dev_profile *profile; const struct devfreq_governor *governor; + struct opp_table *opp_table; struct notifier_block nb; struct delayed_work work; diff --git a/include/linux/dtpm.h b/include/linux/dtpm.h new file mode 100644 index 000000000000..e80a332e3d8a --- /dev/null +++ b/include/linux/dtpm.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Linaro Ltd + * + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> + */ +#ifndef ___DTPM_H__ +#define ___DTPM_H__ + +#include <linux/powercap.h> + +#define MAX_DTPM_DESCR 8 +#define MAX_DTPM_CONSTRAINTS 1 + +struct dtpm { + struct powercap_zone zone; + struct dtpm *parent; + struct list_head sibling; + struct list_head children; + struct dtpm_ops *ops; + unsigned long flags; + u64 power_limit; + u64 power_max; + u64 power_min; + int weight; + void *private; +}; + +struct dtpm_ops { + u64 (*set_power_uw)(struct dtpm *, u64); + u64 (*get_power_uw)(struct dtpm *); + void (*release)(struct dtpm *); +}; + +struct dtpm_descr; + +typedef int (*dtpm_init_t)(struct dtpm_descr *); + +struct dtpm_descr { + struct dtpm *parent; + const char *name; + dtpm_init_t init; +}; + +/* Init section thermal table */ +extern struct dtpm_descr *__dtpm_table[]; +extern struct dtpm_descr *__dtpm_table_end[]; + +#define DTPM_TABLE_ENTRY(name) \ + static typeof(name) *__dtpm_table_entry_##name \ + __used __section("__dtpm_table") = &name + +#define DTPM_DECLARE(name) DTPM_TABLE_ENTRY(name) + +#define for_each_dtpm_table(__dtpm) \ + for (__dtpm = __dtpm_table; \ + __dtpm < __dtpm_table_end; \ + __dtpm++) + +static inline struct dtpm *to_dtpm(struct powercap_zone *zone) +{ + return container_of(zone, struct dtpm, zone); +} + +int dtpm_update_power(struct dtpm *dtpm, u64 power_min, u64 power_max); + +int dtpm_release_zone(struct powercap_zone *pcz); + +struct dtpm *dtpm_alloc(struct dtpm_ops *ops); + +void dtpm_unregister(struct dtpm *dtpm); + +int dtpm_register(const char *name, struct dtpm *dtpm, struct dtpm *parent); + +int dtpm_register_cpu(struct dtpm *parent); + +#endif diff --git a/include/linux/pm.h b/include/linux/pm.h index 47aca6bac1d6..482313a8ccfc 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -537,6 +537,8 @@ struct pm_subsys_data { spinlock_t lock; unsigned int refcount; #ifdef CONFIG_PM_CLK + unsigned int clock_op_might_sleep; + struct mutex clock_mutex; struct list_head clock_list; #endif #ifdef CONFIG_PM_GENERIC_DOMAINS diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 2ca919ae8d36..dfcfbcecc34b 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -9,6 +9,7 @@ #define _LINUX_PM_DOMAIN_H #include <linux/device.h> +#include <linux/ktime.h> #include <linux/mutex.h> #include <linux/pm.h> #include <linux/err.h> @@ -55,6 +56,10 @@ * * GENPD_FLAG_RPM_ALWAYS_ON: Instructs genpd to always keep the PM domain * powered on except for system suspend. + * + * GENPD_FLAG_MIN_RESIDENCY: Enable the genpd governor to consider its + * components' next wakeup when determining the + * optimal idle state. */ #define GENPD_FLAG_PM_CLK (1U << 0) #define GENPD_FLAG_IRQ_SAFE (1U << 1) @@ -62,6 +67,7 @@ #define GENPD_FLAG_ACTIVE_WAKEUP (1U << 3) #define GENPD_FLAG_CPU_DOMAIN (1U << 4) #define GENPD_FLAG_RPM_ALWAYS_ON (1U << 5) +#define GENPD_FLAG_MIN_RESIDENCY (1U << 6) enum gpd_status { GENPD_STATE_ON = 0, /* PM domain is on */ @@ -129,6 +135,7 @@ struct generic_pm_domain { unsigned int state); struct gpd_dev_ops dev_ops; s64 max_off_time_ns; /* Maximum allowed "suspended" time. */ + ktime_t next_wakeup; /* Maintained by the domain governor */ bool max_off_time_changed; bool cached_power_down_ok; bool cached_power_down_state_idx; @@ -191,6 +198,7 @@ struct generic_pm_domain_data { struct notifier_block *power_nb; int cpu; unsigned int performance_state; + ktime_t next_wakeup; void *data; }; @@ -217,6 +225,7 @@ int pm_genpd_remove(struct generic_pm_domain *genpd); int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state); int dev_pm_genpd_add_notifier(struct device *dev, struct notifier_block *nb); int dev_pm_genpd_remove_notifier(struct device *dev); +void dev_pm_genpd_set_next_wakeup(struct device *dev, ktime_t next); extern struct dev_power_governor simple_qos_governor; extern struct dev_power_governor pm_domain_always_on_gov; @@ -275,6 +284,9 @@ static inline int dev_pm_genpd_remove_notifier(struct device *dev) return -EOPNOTSUPP; } +static inline void dev_pm_genpd_set_next_wakeup(struct device *dev, ktime_t next) +{ } + #define simple_qos_governor (*(struct dev_power_governor *)(NULL)) #define pm_domain_always_on_gov (*(struct dev_power_governor *)(NULL)) #endif diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 1435c054016a..c0371efa4a0f 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -98,6 +98,9 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp); +unsigned int dev_pm_opp_get_required_pstate(struct dev_pm_opp *opp, + unsigned int index); + bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); int dev_pm_opp_get_opp_count(struct device *dev); @@ -111,6 +114,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, bool available); struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev, unsigned int level); +struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev, + unsigned int *level); struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq); @@ -143,28 +148,32 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name) void dev_pm_opp_put_prop_name(struct opp_table *opp_table); struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count); void dev_pm_opp_put_regulators(struct opp_table *opp_table); -struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name); +struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name); void dev_pm_opp_put_clkname(struct opp_table *opp_table); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); +struct opp_table *devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); void dev_pm_opp_detach_genpd(struct opp_table *opp_table); +struct opp_table *devm_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); +struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp); int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); -int dev_pm_opp_set_bw(struct device *dev, struct dev_pm_opp *opp); +int dev_pm_opp_set_opp(struct device *dev, struct dev_pm_opp *opp); int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask); int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); void dev_pm_opp_remove_table(struct device *dev); void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask); +int dev_pm_opp_sync_regulators(struct device *dev); #else static inline struct opp_table *dev_pm_opp_get_opp_table(struct device *dev) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline struct opp_table *dev_pm_opp_get_opp_table_indexed(struct device *dev, int index) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put_opp_table(struct opp_table *opp_table) {} @@ -184,6 +193,13 @@ static inline unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp) return 0; } +static inline +unsigned int dev_pm_opp_get_required_pstate(struct dev_pm_opp *opp, + unsigned int index) +{ + return 0; +} + static inline bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp) { return false; @@ -217,31 +233,37 @@ static inline unsigned long dev_pm_opp_get_suspend_opp_freq(struct device *dev) static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev, unsigned int level) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); +} + +static inline struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev, + unsigned int *level) +{ + return ERR_PTR(-EOPNOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev, unsigned long u_volt) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put(struct dev_pm_opp *opp) {} @@ -249,7 +271,7 @@ static inline void dev_pm_opp_put(struct dev_pm_opp *opp) {} static inline int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq) @@ -280,19 +302,19 @@ static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq) static inline int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) {} @@ -300,57 +322,76 @@ static inline void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) {} static inline struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table) {} +static inline struct opp_table * +devm_pm_opp_register_set_opp_helper(struct device *dev, + int (*set_opp)(struct dev_pm_set_opp_data *data)) +{ + return ERR_PTR(-EOPNOTSUPP); +} + static inline struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put_prop_name(struct opp_table *opp_table) {} static inline struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put_regulators(struct opp_table *opp_table) {} -static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name) +static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {} static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs) { - return ERR_PTR(-ENOTSUPP); + return ERR_PTR(-EOPNOTSUPP); } static inline void dev_pm_opp_detach_genpd(struct opp_table *opp_table) {} +static inline struct opp_table *devm_pm_opp_attach_genpd(struct device *dev, + const char **names, struct device ***virt_devs) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, + struct opp_table *dst_table, struct dev_pm_opp *src_opp) +{ + return ERR_PTR(-EOPNOTSUPP); +} + static inline int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { - return -ENOTSUPP; + return -EOPNOTSUPP; } -static inline int dev_pm_opp_set_bw(struct device *dev, struct dev_pm_opp *opp) +static inline int dev_pm_opp_set_opp(struct device *dev, struct dev_pm_opp *opp) { return -EOPNOTSUPP; } static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) @@ -366,11 +407,17 @@ static inline void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask { } +static inline int dev_pm_opp_sync_regulators(struct device *dev) +{ + return -EOPNOTSUPP; +} + #endif /* CONFIG_PM_OPP */ #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) int dev_pm_opp_of_add_table(struct device *dev); int dev_pm_opp_of_add_table_indexed(struct device *dev, int index); +int dev_pm_opp_of_add_table_noclk(struct device *dev, int index); void dev_pm_opp_of_remove_table(struct device *dev); int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask); void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask); @@ -387,12 +434,17 @@ static inline void dev_pm_opp_of_unregister_em(struct device *dev) #else static inline int dev_pm_opp_of_add_table(struct device *dev) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int dev_pm_opp_of_add_table_indexed(struct device *dev, int index) { - return -ENOTSUPP; + return -EOPNOTSUPP; +} + +static inline int dev_pm_opp_of_add_table_noclk(struct device *dev, int index) +{ + return -EOPNOTSUPP; } static inline void dev_pm_opp_of_remove_table(struct device *dev) @@ -401,7 +453,7 @@ static inline void dev_pm_opp_of_remove_table(struct device *dev) static inline int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask) @@ -410,7 +462,7 @@ static inline void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpum static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev) @@ -426,7 +478,7 @@ static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) static inline int dev_pm_opp_of_register_em(struct device *dev, struct cpumask *cpus) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline void dev_pm_opp_of_unregister_em(struct device *dev) @@ -435,12 +487,12 @@ static inline void dev_pm_opp_of_unregister_em(struct device *dev) static inline int of_get_required_opp_performance_state(struct device_node *np, int index) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int dev_pm_opp_of_find_icc_paths(struct device *dev, struct opp_table *opp_table) { - return -ENOTSUPP; + return -EOPNOTSUPP; } #endif diff --git a/include/linux/units.h b/include/linux/units.h index 5c115c809507..dcc30a53fa93 100644 --- a/include/linux/units.h +++ b/include/linux/units.h @@ -4,6 +4,10 @@ #include <linux/math.h> +#define MILLIWATT_PER_WATT 1000L +#define MICROWATT_PER_MILLIWATT 1000L +#define MICROWATT_PER_WATT 1000000L + #define ABSOLUTE_ZERO_MILLICELSIUS -273150 static inline long milli_kelvin_to_millicelsius(long t) diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index a7320f07689d..6bfe3ead10ad 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -139,7 +139,6 @@ config PM_SLEEP_SMP_NONZERO_CPU config PM_AUTOSLEEP bool "Opportunistic sleep" depends on PM_SLEEP - default n help Allow the kernel to trigger a system transition into a global sleep state automatically whenever there are no active wakeup sources. @@ -147,7 +146,6 @@ config PM_AUTOSLEEP config PM_WAKELOCKS bool "User space wakeup sources interface" depends on PM_SLEEP - default n help Allow user space to create, activate and deactivate wakeup source objects with the help of a sysfs-based interface. @@ -293,7 +291,6 @@ config PM_GENERIC_DOMAINS config WQ_POWER_EFFICIENT_DEFAULT bool "Enable workqueue power-efficient mode by default" depends on PM - default n help Per-cpu workqueues are generally preferred because they show better performance thanks to cache locality; unfortunately, @@ -322,15 +319,14 @@ config CPU_PM bool config ENERGY_MODEL - bool "Energy Model for CPUs" + bool "Energy Model for devices with DVFS (CPUs, GPUs, etc)" depends on SMP depends on CPU_FREQ - default n help Several subsystems (thermal and/or the task scheduler for example) - can leverage information about the energy consumed by CPUs to make - smarter decisions. This config option enables the framework from - which subsystems can access the energy models. + can leverage information about the energy consumed by devices to + make smarter decisions. This config option enables the framework + from which subsystems can access the energy models. The exact usage of the energy model is subsystem-dependent. diff --git a/kernel/power/main.c b/kernel/power/main.c index 0aefd6f57e0a..12c7e1bb442f 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -387,7 +387,7 @@ static struct attribute *suspend_attrs[] = { NULL, }; -static struct attribute_group suspend_attr_group = { +static const struct attribute_group suspend_attr_group = { .name = "suspend_stats", .attrs = suspend_attrs, }; diff --git a/kernel/power/process.c b/kernel/power/process.c index 45b054b7b5ec..50cc63534486 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -235,7 +235,7 @@ void thaw_kernel_threads(void) read_lock(&tasklist_lock); for_each_process_thread(g, p) { - if (p->flags & (PF_KTHREAD | PF_WQ_WORKER)) + if (p->flags & PF_KTHREAD) __thaw_task(p); } read_unlock(&tasklist_lock); diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index c7bcddbd486d..3b1594447f29 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -270,14 +270,14 @@ clean: $(MAKE) -C bench O=$(OUTPUT) clean -install-lib: +install-lib: libcpupower $(INSTALL) -d $(DESTDIR)${libdir} $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ $(INSTALL) -d $(DESTDIR)${includedir} $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h -install-tools: +install-tools: $(OUTPUT)cpupower $(INSTALL) -d $(DESTDIR)${bindir} $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} $(INSTALL) -d $(DESTDIR)${bash_completion_dir} @@ -293,14 +293,14 @@ install-man: $(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1 $(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 -install-gmo: +install-gmo: create-gmo $(INSTALL) -d $(DESTDIR)${localedir} for HLANG in $(LANGUAGES); do \ echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ $(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ done; -install-bench: +install-bench: compile-bench @#DESTDIR must be set from outside to survive @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile index f68b4bc55273..d9d9923af85c 100644 --- a/tools/power/cpupower/bench/Makefile +++ b/tools/power/cpupower/bench/Makefile @@ -27,7 +27,7 @@ $(OUTPUT)cpufreq-bench: $(OBJS) all: $(OUTPUT)cpufreq-bench -install: +install: $(OUTPUT)cpufreq-bench mkdir -p $(DESTDIR)/$(sbindir) mkdir -p $(DESTDIR)/$(bindir) mkdir -p $(DESTDIR)/$(docdir) diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c index 6efc0f6b1b11..f9895e31ff5a 100644 --- a/tools/power/cpupower/utils/cpufreq-info.c +++ b/tools/power/cpupower/utils/cpufreq-info.c @@ -186,8 +186,7 @@ static int get_boost_mode_x86(unsigned int cpu) if ((cpupower_cpu_info.vendor == X86_VENDOR_AMD && cpupower_cpu_info.family >= 0x10) || cpupower_cpu_info.vendor == X86_VENDOR_HYGON) { - ret = decode_pstates(cpu, cpupower_cpu_info.family, b_states, - pstates, &pstate_no); + ret = decode_pstates(cpu, b_states, pstates, &pstate_no); if (ret) return ret; diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c index 7c4f83a8c973..97f2c857048e 100644 --- a/tools/power/cpupower/utils/helpers/amd.c +++ b/tools/power/cpupower/utils/helpers/amd.c @@ -13,7 +13,8 @@ #define MSR_AMD_PSTATE 0xc0010064 #define MSR_AMD_PSTATE_LIMIT 0xc0010061 -union msr_pstate { +union core_pstate { + /* pre fam 17h: */ struct { unsigned fid:6; unsigned did:3; @@ -26,7 +27,8 @@ union msr_pstate { unsigned idddiv:2; unsigned res3:21; unsigned en:1; - } bits; + } pstate; + /* since fam 17h: */ struct { unsigned fid:8; unsigned did:6; @@ -35,37 +37,37 @@ union msr_pstate { unsigned idddiv:2; unsigned res1:31; unsigned en:1; - } fam17h_bits; + } pstatedef; unsigned long long val; }; -static int get_did(int family, union msr_pstate pstate) +static int get_did(union core_pstate pstate) { int t; - if (family == 0x12) + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) + t = pstate.pstatedef.did; + else if (cpupower_cpu_info.family == 0x12) t = pstate.val & 0xf; - else if (family == 0x17 || family == 0x18) - t = pstate.fam17h_bits.did; else - t = pstate.bits.did; + t = pstate.pstate.did; return t; } -static int get_cof(int family, union msr_pstate pstate) +static int get_cof(union core_pstate pstate) { int t; int fid, did, cof; - did = get_did(family, pstate); - if (family == 0x17 || family == 0x18) { - fid = pstate.fam17h_bits.fid; + did = get_did(pstate); + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_PSTATEDEF) { + fid = pstate.pstatedef.fid; cof = 200 * fid / did; } else { t = 0x10; - fid = pstate.bits.fid; - if (family == 0x11) + fid = pstate.pstate.fid; + if (cpupower_cpu_info.family == 0x11) t = 0x8; cof = (100 * (fid + t)) >> did; } @@ -74,8 +76,7 @@ static int get_cof(int family, union msr_pstate pstate) /* Needs: * cpu -> the cpu that gets evaluated - * cpu_family -> The cpu's family (0x10, 0x12,...) - * boots_states -> how much boost states the machines support + * boost_states -> how much boost states the machines support * * Fills up: * pstates -> a pointer to an array of size MAX_HW_PSTATES @@ -85,31 +86,23 @@ static int get_cof(int family, union msr_pstate pstate) * * returns zero on success, -1 on failure */ -int decode_pstates(unsigned int cpu, unsigned int cpu_family, - int boost_states, unsigned long *pstates, int *no) +int decode_pstates(unsigned int cpu, int boost_states, + unsigned long *pstates, int *no) { - int i, psmax, pscur; - union msr_pstate pstate; + int i, psmax; + union core_pstate pstate; unsigned long long val; - /* Only read out frequencies from HW when CPU might be boostable - to keep the code as short and clean as possible. - Otherwise frequencies are exported via ACPI tables. - */ - if (cpu_family < 0x10 || cpu_family == 0x14) + /* Only read out frequencies from HW if HW Pstate is supported, + * otherwise frequencies are exported via ACPI tables. + */ + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_HW_PSTATE)) return -1; if (read_msr(cpu, MSR_AMD_PSTATE_LIMIT, &val)) return -1; psmax = (val >> 4) & 0x7; - - if (read_msr(cpu, MSR_AMD_PSTATE_STATUS, &val)) - return -1; - - pscur = val & 0x7; - - pscur += boost_states; psmax += boost_states; for (i = 0; i <= psmax; i++) { if (i >= MAX_HW_PSTATES) { @@ -119,12 +112,12 @@ int decode_pstates(unsigned int cpu, unsigned int cpu_family, } if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val)) return -1; - if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en)) - continue; - else if (!pstate.bits.en) + + /* The enabled bit (bit 63) is common for all families */ + if (!pstate.pstatedef.en) continue; - pstates[i] = get_cof(cpu_family, pstate); + pstates[i] = get_cof(pstate); } *no = i; return 0; diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c index 73bfafc60e9b..72eb43593180 100644 --- a/tools/power/cpupower/utils/helpers/cpuid.c +++ b/tools/power/cpupower/utils/helpers/cpuid.c @@ -128,9 +128,23 @@ out: /* AMD or Hygon Boost state enable/disable register */ if (cpu_info->vendor == X86_VENDOR_AMD || cpu_info->vendor == X86_VENDOR_HYGON) { - if (ext_cpuid_level >= 0x80000007 && - (cpuid_edx(0x80000007) & (1 << 9))) - cpu_info->caps |= CPUPOWER_CAP_AMD_CBP; + if (ext_cpuid_level >= 0x80000007) { + if (cpuid_edx(0x80000007) & (1 << 9)) { + cpu_info->caps |= CPUPOWER_CAP_AMD_CPB; + + if (cpu_info->family >= 0x17) + cpu_info->caps |= CPUPOWER_CAP_AMD_CPB_MSR; + } + + if ((cpuid_edx(0x80000007) & (1 << 7)) && + cpu_info->family != 0x14) { + /* HW pstate was not implemented in family 0x14 */ + cpu_info->caps |= CPUPOWER_CAP_AMD_HW_PSTATE; + + if (cpu_info->family >= 0x17) + cpu_info->caps |= CPUPOWER_CAP_AMD_PSTATEDEF; + } + } if (ext_cpuid_level >= 0x80000008 && cpuid_ebx(0x80000008) & (1 << 4)) diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h index 0642e60a6ce1..33ffacee7fcb 100644 --- a/tools/power/cpupower/utils/helpers/helpers.h +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -64,12 +64,15 @@ enum cpupower_cpu_vendor {X86_VENDOR_UNKNOWN = 0, X86_VENDOR_INTEL, #define CPUPOWER_CAP_INV_TSC 0x00000001 #define CPUPOWER_CAP_APERF 0x00000002 -#define CPUPOWER_CAP_AMD_CBP 0x00000004 +#define CPUPOWER_CAP_AMD_CPB 0x00000004 #define CPUPOWER_CAP_PERF_BIAS 0x00000008 #define CPUPOWER_CAP_HAS_TURBO_RATIO 0x00000010 #define CPUPOWER_CAP_IS_SNB 0x00000020 #define CPUPOWER_CAP_INTEL_IDA 0x00000040 #define CPUPOWER_CAP_AMD_RDPRU 0x00000080 +#define CPUPOWER_CAP_AMD_HW_PSTATE 0x00000100 +#define CPUPOWER_CAP_AMD_PSTATEDEF 0x00000200 +#define CPUPOWER_CAP_AMD_CPB_MSR 0x00000400 #define CPUPOWER_AMD_CPBDIS 0x02000000 @@ -125,8 +128,8 @@ extern struct pci_dev *pci_slot_func_init(struct pci_access **pacc, /* AMD HW pstate decoding **************************/ -extern int decode_pstates(unsigned int cpu, unsigned int cpu_family, - int boost_states, unsigned long *pstates, int *no); +extern int decode_pstates(unsigned int cpu, int boost_states, + unsigned long *pstates, int *no); /* AMD HW pstate decoding **************************/ @@ -143,9 +146,8 @@ unsigned int cpuid_edx(unsigned int op); /* cpuid and cpuinfo helpers **************************/ /* X86 ONLY ********************************************/ #else -static inline int decode_pstates(unsigned int cpu, unsigned int cpu_family, - int boost_states, unsigned long *pstates, - int *no) +static inline int decode_pstates(unsigned int cpu, int boost_states, + unsigned long *pstates, int *no) { return -1; }; static inline int read_msr(int cpu, unsigned int idx, unsigned long long *val) diff --git a/tools/power/cpupower/utils/helpers/misc.c b/tools/power/cpupower/utils/helpers/misc.c index 650b9a9a6584..fc6e34511721 100644 --- a/tools/power/cpupower/utils/helpers/misc.c +++ b/tools/power/cpupower/utils/helpers/misc.c @@ -16,17 +16,12 @@ int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, int *states) { - struct cpupower_cpu_info cpu_info; int ret; unsigned long long val; *support = *active = *states = 0; - ret = get_cpu_info(&cpu_info); - if (ret) - return ret; - - if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CBP) { + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CPB) { *support = 1; /* AMD Family 0x17 does not utilize PCI D18F4 like prior @@ -34,7 +29,7 @@ int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, * has Hardware determined variable increments instead. */ - if (cpu_info.family == 0x17 || cpu_info.family == 0x18) { + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CPB_MSR) { if (!read_msr(cpu, MSR_AMD_HWCR, &val)) { if (!(val & CPUPOWER_AMD_CPBDIS)) *active = 1; |