Merge tag 'intel-gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel

intel-gpio for v5.1-1

Small clean up for Intel PMIC GPIO drivers, includes:
 - optimizing IRQ handlers by usage of for_each_set_bit()
 - sorting headers alphabetically for better maintenance
 - conversion to SPDX identifier

The following is an automated git shortlog grouped by driver:

crystalcove:
 -  Convert to use SPDX identifier
 -  Sort headers alphabetically
 -  Use for_each_set_bit() in IRQ handler

msic:
 -  Convert to use SPDX identifier
 -  Sort headers alphabetically
 -  Remove duplicate check in IRQ handler

wcove:
 -  Convert to use SPDX identifier
 -  Fix indentation
 -  Sort headers alphabetically
 -  Allow return negative error code from to_reg()

3 files changed, 29 insertions, 64 deletions

diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 58531d8b8c6e..14d1f4c933b6 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -1,28 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
+ * Intel Crystal Cove GPIO Driver
  *
  * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Author: Yang, Bin <bin.yang@intel.com>
  */
 
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/gpio/driver.h>
-#include <linux/seq_file.h>
-#include <linux/bitops.h>
 #include <linux/regmap.h>
-#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/seq_file.h>
 
 #define CRYSTALCOVE_GPIO_NUM	16
 #define CRYSTALCOVE_VGPIO_NUM	95
@@ -279,8 +271,8 @@ static struct irq_chip crystalcove_irqchip = {
 static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
 {
 	struct crystalcove_gpio *cg = data;
+	unsigned long pending;
 	unsigned int p0, p1;
-	int pending;
 	int gpio;
 	unsigned int virq;
 
@@ -293,11 +285,9 @@ static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
 
 	pending = p0 | p1 << 8;
 
-	for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
-		if (pending & BIT(gpio)) {
-			virq = irq_find_mapping(cg->chip.irq.domain, gpio);
-			handle_nested_irq(virq);
-		}
+	for_each_set_bit(gpio, &pending, CRYSTALCOVE_GPIO_NUM) {
+		virq = irq_find_mapping(cg->chip.irq.domain, gpio);
+		handle_nested_irq(virq);
 	}
 
 	return IRQ_HANDLED;
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
index 3b34dbecef99..7e3c96e4ab2c 100644
--- a/drivers/gpio/gpio-msic.c
+++ b/drivers/gpio/gpio-msic.c
@@ -1,32 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Intel Medfield MSIC GPIO driver>
  * Copyright (c) 2011, Intel Corporation.
  *
  * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
  * Based on intel_pmic_gpio.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/gpio/driver.h>
-#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
 
 /* the offset for the mapping of global gpio pin to irq */
 #define MSIC_GPIO_IRQ_OFFSET	0x100
@@ -237,20 +224,17 @@ static void msic_gpio_irq_handler(struct irq_desc *desc)
 	struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
 	struct irq_chip *chip = irq_data_get_irq_chip(data);
 	struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
+	unsigned long pending;
 	int i;
 	int bitnr;
 	u8 pin;
-	unsigned long pending = 0;
 
 	for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
 		intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
 		pending = pin;
 
-		if (pending) {
-			for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
-				generic_handle_irq(mg->irq_base +
-						   (i * BITS_PER_BYTE) + bitnr);
-		}
+		for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
+			generic_handle_irq(mg->irq_base + i * BITS_PER_BYTE + bitnr);
 	}
 	chip->irq_eoi(data);
 }
diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index dde7c6aecbb5..444fe9e7f04a 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -1,34 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Intel Whiskey Cove PMIC GPIO Driver
  *
  * This driver is written based on gpio-crystalcove.c
  *
  * Copyright (C) 2016 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
 #include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
 #include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
 
 /*
  * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
- * Bank 0: Pin 0 - 6
- * Bank 1: Pin 7 - 10
- * Bank 2: Pin 11 -12
+ * Bank 0: Pin  0 - 6
+ * Bank 1: Pin  7 - 10
+ * Bank 2: Pin 11 - 12
  * Each pin has one output control register and one input control register.
  */
 #define BANK0_NR_PINS		7
@@ -75,8 +67,8 @@
 #define CTLO_RVAL_50KDOWN	(2 << 1)
 #define CTLO_RVAL_50KUP		(3 << 1)
 
-#define CTLO_INPUT_SET	(CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
-#define CTLO_OUTPUT_SET	(CTLO_DIR_OUT | CTLO_INPUT_SET)
+#define CTLO_INPUT_SET		(CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_SET		(CTLO_DIR_OUT | CTLO_INPUT_SET)
 
 enum ctrl_register {
 	CTRL_IN,
@@ -105,7 +97,7 @@ struct wcove_gpio {
 	bool set_irq_mask;
 };
 
-static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type)
+static inline int to_reg(int gpio, enum ctrl_register reg_type)
 {
 	unsigned int reg;
 
@@ -203,8 +195,7 @@ static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 	return val & 0x1;
 }
 
-static void wcove_gpio_set(struct gpio_chip *chip,
-				 unsigned int gpio, int value)
+static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 {
 	struct wcove_gpio *wg = gpiochip_get_data(chip);
 	int reg = to_reg(gpio, CTRL_OUT);