/* * Copyright (C) 2017 John Crispin * * Based on code from * Allwinner Technology Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #define RT_SYSC_REG_SYSCFG1 0x014 #define RT_SYSC_REG_CLKCFG1 0x030 #define RT_SYSC_REG_USB_PHY_CFG 0x05c #define OFS_U2_PHY_AC0 0x800 #define OFS_U2_PHY_AC1 0x804 #define OFS_U2_PHY_AC2 0x808 #define OFS_U2_PHY_ACR0 0x810 #define OFS_U2_PHY_ACR1 0x814 #define OFS_U2_PHY_ACR2 0x818 #define OFS_U2_PHY_ACR3 0x81C #define OFS_U2_PHY_ACR4 0x820 #define OFS_U2_PHY_AMON0 0x824 #define OFS_U2_PHY_DCR0 0x860 #define OFS_U2_PHY_DCR1 0x864 #define OFS_U2_PHY_DTM0 0x868 #define OFS_U2_PHY_DTM1 0x86C #define RT_RSTCTRL_UDEV BIT(25) #define RT_RSTCTRL_UHST BIT(22) #define RT_SYSCFG1_USB0_HOST_MODE BIT(10) #define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) #define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22) #define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) #define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) #define USB_PHY_UTMI_8B60M BIT(1) #define UDEV_WAKEUP BIT(0) struct ralink_usb_phy { struct reset_control *rstdev; struct reset_control *rsthost; u32 clk; struct phy *phy; void __iomem *base; struct regmap *sysctl; }; static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg) { writel(val, phy->base + reg); } static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg) { return readl(phy->base + reg); } static void ralink_usb_phy_init(struct ralink_usb_phy *phy) { u2_phy_r32(phy, OFS_U2_PHY_AC2); u2_phy_r32(phy, OFS_U2_PHY_ACR0); u2_phy_r32(phy, OFS_U2_PHY_DCR0); u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); u2_phy_r32(phy, OFS_U2_PHY_DCR0); u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); u2_phy_r32(phy, OFS_U2_PHY_DCR0); u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); u2_phy_r32(phy, OFS_U2_PHY_DCR0); u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); u2_phy_r32(phy, OFS_U2_PHY_DCR0); u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); } static int ralink_usb_phy_power_on(struct phy *_phy) { struct ralink_usb_phy *phy = phy_get_drvdata(_phy); u32 t; /* enable the phy */ regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, phy->clk, phy->clk); /* setup host mode */ regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSCFG1_USB0_HOST_MODE); /* deassert the reset lines */ reset_control_deassert(phy->rsthost); reset_control_deassert(phy->rstdev); /* * The SDK kernel had a delay of 100ms. however on device * testing showed that 10ms is enough */ mdelay(10); if (phy->base) ralink_usb_phy_init(phy); /* print some status info */ regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t); dev_info(&phy->phy->dev, "remote usb device wakeup %s\n", (t & UDEV_WAKEUP) ? ("enabled") : ("disabled")); if (t & USB_PHY_UTMI_8B60M) dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n"); else dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n"); return 0; } static int ralink_usb_phy_power_off(struct phy *_phy) { struct ralink_usb_phy *phy = phy_get_drvdata(_phy); /* disable the phy */ regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, phy->clk, 0); /* assert the reset lines */ reset_control_assert(phy->rstdev); reset_control_assert(phy->rsthost); return 0; } static struct phy_ops ralink_usb_phy_ops = { .power_on = ralink_usb_phy_power_on, .power_off = ralink_usb_phy_power_off, .owner = THIS_MODULE, }; static const struct of_device_id ralink_usb_phy_of_match[] = { { .compatible = "ralink,rt3352-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) }, { .compatible = "mediatek,mt7620-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) }, { .compatible = "mediatek,mt7628-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) }, { }, }; MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match); static int ralink_usb_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res; struct phy_provider *phy_provider; const struct of_device_id *match; struct ralink_usb_phy *phy; match = of_match_device(ralink_usb_phy_of_match, &pdev->dev); if (!match) return -ENODEV; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->clk = (u32) match->data; phy->base = NULL; phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl"); if (IS_ERR(phy->sysctl)) { dev_err(dev, "failed to get sysctl registers\n"); return PTR_ERR(phy->sysctl); } /* The MT7628 and MT7688 require extra setup of PHY registers. */ if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phy->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(phy->base)) { dev_err(dev, "failed to remap register memory\n"); return PTR_ERR(phy->base); } } phy->rsthost = devm_reset_control_get(&pdev->dev, "host"); if (IS_ERR(phy->rsthost)) { dev_err(dev, "host reset is missing\n"); return PTR_ERR(phy->rsthost); } phy->rstdev = devm_reset_control_get(&pdev->dev, "device"); if (IS_ERR(phy->rstdev)) { dev_err(dev, "device reset is missing\n"); return PTR_ERR(phy->rstdev); } phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops); if (IS_ERR(phy->phy)) { dev_err(dev, "failed to create PHY\n"); return PTR_ERR(phy->phy); } phy_set_drvdata(phy->phy, phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy_provider); } static struct platform_driver ralink_usb_phy_driver = { .probe = ralink_usb_phy_probe, .driver = { .of_match_table = ralink_usb_phy_of_match, .name = "ralink-usb-phy", } }; module_platform_driver(ralink_usb_phy_driver); MODULE_DESCRIPTION("Ralink USB phy driver"); MODULE_AUTHOR("John Crispin "); MODULE_LICENSE("GPL v2");