.. SPDX-License-Identifier: GPL-2.0 .. _bootconfig: ================== Boot Configuration ================== :Author: Masami Hiramatsu Overview ======== The boot configuration expands the current kernel command line to support additional key-value data when booting the kernel in an efficient way. This allows administrators to pass a structured-Key config file. Config File Syntax ================== The boot config syntax is a simple structured key-value. Each key consists of dot-connected-words, and key and value are connected by ``=``. The value has to be terminated by semi-colon (``;``) or newline (``\n``). For array value, array entries are separated by comma (``,``). :: KEY[.WORD[...]] = VALUE[, VALUE2[...]][;] Unlike the kernel command line syntax, spaces are OK around the comma and ``=``. Each key word must contain only alphabets, numbers, dash (``-``) or underscore (``_``). And each value only contains printable characters or spaces except for delimiters such as semi-colon (``;``), new-line (``\n``), comma (``,``), hash (``#``) and closing brace (``}``). If you want to use those delimiters in a value, you can use either double- quotes (``"VALUE"``) or single-quotes (``'VALUE'``) to quote it. Note that you can not escape these quotes. There can be a key which doesn't have value or has an empty value. Those keys are used for checking if the key exists or not (like a boolean). Key-Value Syntax ---------------- The boot config file syntax allows user to merge partially same word keys by brace. For example:: foo.bar.baz = value1 foo.bar.qux.quux = value2 These can be written also in:: foo.bar { baz = value1 qux.quux = value2 } Or more shorter, written as following:: foo.bar { baz = value1; qux.quux = value2 } In both styles, same key words are automatically merged when parsing it at boot time. So you can append similar trees or key-values. Comments -------- The config syntax accepts shell-script style comments. The comments starting with hash ("#") until newline ("\n") will be ignored. :: # comment line foo = value # value is set to foo. bar = 1, # 1st element 2, # 2nd element 3 # 3rd element This is parsed as below:: foo = value bar = 1, 2, 3 Note that you can not put a comment between value and delimiter(``,`` or ``;``). This means following config has a syntax error :: key = 1 # comment ,2 /proc/bootconfig ================ /proc/bootconfig is a user-space interface of the boot config. Unlike /proc/cmdline, this file shows the key-value style list. Each key-value pair is shown in each line with following style:: KEY[.WORDS...] = "[VALUE]"[,"VALUE2"...] Boot Kernel With a Boot Config ============================== Since the boot configuration file is loaded with initrd, it will be added to the end of the initrd (initramfs) image file. The Linux kernel decodes the last part of the initrd image in memory to get the boot configuration data. Because of this "piggyback" method, there is no need to change or update the boot loader and the kernel image itself. To do this operation, Linux kernel provides "bootconfig" command under tools/bootconfig, which allows admin to apply or delete the config file to/from initrd image. You can build it by the following command:: # make -C tools/bootconfig To add your boot config file to initrd image, run bootconfig as below (Old data is removed automatically if exists):: # tools/bootconfig/bootconfig -a your-config /boot/initrd.img-X.Y.Z To remove the config from the image, you can use -d option as below:: # tools/bootconfig/bootconfig -d /boot/initrd.img-X.Y.Z Config File Limitation ====================== Currently the maximum config size size is 32KB and the total key-words (not key-value entries) must be under 1024 nodes. Note: this is not the number of entries but nodes, an entry must consume more than 2 nodes (a key-word and a value). So theoretically, it will be up to 512 key-value pairs. If keys contains 3 words in average, it can contain 256 key-value pairs. In most cases, the number of config items will be under 100 entries and smaller than 8KB, so it would be enough. If the node number exceeds 1024, parser returns an error even if the file size is smaller than 32KB. Anyway, since bootconfig command verifies it when appending a boot config to initrd image, user can notice it before boot. Bootconfig APIs =============== User can query or loop on key-value pairs, also it is possible to find a root (prefix) key node and find key-values under that node. If you have a key string, you can query the value directly with the key using xbc_find_value(). If you want to know what keys exist in the boot config, you can use xbc_for_each_key_value() to iterate key-value pairs. Note that you need to use xbc_array_for_each_value() for accessing each array's value, e.g.:: vnode = NULL; xbc_find_value("key.word", &vnode); if (vnode && xbc_node_is_array(vnode)) xbc_array_for_each_value(vnode, value) { printk("%s ", value); } If you want to focus on keys which have a prefix string, you can use xbc_find_node() to find a node by the prefix string, and iterate keys under the prefix node with xbc_node_for_each_key_value(). But the most typical usage is to get the named value under prefix or get the named array under prefix as below:: root = xbc_find_node("key.prefix"); value = xbc_node_find_value(root, "option", &vnode); ... xbc_node_for_each_array_value(root, "array-option", value, anode) { ... } This accesses a value of "key.prefix.option" and an array of "key.prefix.array-option". Locking is not needed, since after initialization, the config becomes read-only. All data and keys must be copied if you need to modify it. Functions and structures ======================== .. kernel-doc:: include/linux/bootconfig.h .. kernel-doc:: lib/bootconfig.c