From a6a241764f69c62d23fc6960920cc662ae4069e9 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Mon, 11 Sep 2023 11:32:51 +0100 Subject: swiotlb: use the calculated number of areas Commit 8ac04063354a ("swiotlb: reduce the number of areas to match actual memory pool size") calculated the reduced number of areas in swiotlb_init_remap() but didn't actually use the value. Replace usage of default_nareas accordingly. Fixes: 8ac04063354a ("swiotlb: reduce the number of areas to match actual memory pool size") Signed-off-by: Ross Lagerwall Signed-off-by: Christoph Hellwig --- kernel/dma/swiotlb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 394494a6b1f3..85dd94323b98 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -399,14 +399,13 @@ void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags, } mem->areas = memblock_alloc(array_size(sizeof(struct io_tlb_area), - default_nareas), SMP_CACHE_BYTES); + nareas), SMP_CACHE_BYTES); if (!mem->areas) { pr_warn("%s: Failed to allocate mem->areas.\n", __func__); return; } - swiotlb_init_io_tlb_pool(mem, __pa(tlb), nslabs, false, - default_nareas); + swiotlb_init_io_tlb_pool(mem, __pa(tlb), nslabs, false, nareas); add_mem_pool(&io_tlb_default_mem, mem); if (flags & SWIOTLB_VERBOSE) -- cgit v1.2.3-58-ga151 From 2d5780bbef8dbe6375d481cbea212606a80e4453 Mon Sep 17 00:00:00 2001 From: Petr Tesarik Date: Tue, 26 Sep 2023 20:55:56 +0200 Subject: swiotlb: fix the check whether a device has used software IO TLB When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik Reviewed-by: Catalin Marinas Signed-off-by: Christoph Hellwig --- include/linux/swiotlb.h | 23 ++++++++++++++++------- kernel/dma/swiotlb.c | 26 ++++++++++++++++++++------ 2 files changed, 36 insertions(+), 13 deletions(-) (limited to 'kernel') diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h index b4536626f8ff..ecde0312dd52 100644 --- a/include/linux/swiotlb.h +++ b/include/linux/swiotlb.h @@ -172,14 +172,23 @@ static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr) if (!mem) return false; - if (IS_ENABLED(CONFIG_SWIOTLB_DYNAMIC)) { - /* Pairs with smp_wmb() in swiotlb_find_slots() and - * swiotlb_dyn_alloc(), which modify the RCU lists. - */ - smp_rmb(); - return swiotlb_find_pool(dev, paddr); - } +#ifdef CONFIG_SWIOTLB_DYNAMIC + /* + * All SWIOTLB buffer addresses must have been returned by + * swiotlb_tbl_map_single() and passed to a device driver. + * If a SWIOTLB address is checked on another CPU, then it was + * presumably loaded by the device driver from an unspecified private + * data structure. Make sure that this load is ordered before reading + * dev->dma_uses_io_tlb here and mem->pools in swiotlb_find_pool(). + * + * This barrier pairs with smp_mb() in swiotlb_find_slots(). + */ + smp_rmb(); + return READ_ONCE(dev->dma_uses_io_tlb) && + swiotlb_find_pool(dev, paddr); +#else return paddr >= mem->defpool.start && paddr < mem->defpool.end; +#endif } static inline bool is_swiotlb_force_bounce(struct device *dev) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 85dd94323b98..01637677736f 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -728,9 +728,6 @@ static void swiotlb_dyn_alloc(struct work_struct *work) } add_mem_pool(mem, pool); - - /* Pairs with smp_rmb() in is_swiotlb_buffer(). */ - smp_wmb(); } /** @@ -1151,9 +1148,26 @@ static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr, spin_unlock_irqrestore(&dev->dma_io_tlb_lock, flags); found: - dev->dma_uses_io_tlb = true; - /* Pairs with smp_rmb() in is_swiotlb_buffer() */ - smp_wmb(); + WRITE_ONCE(dev->dma_uses_io_tlb, true); + + /* + * The general barrier orders reads and writes against a presumed store + * of the SWIOTLB buffer address by a device driver (to a driver private + * data structure). It serves two purposes. + * + * First, the store to dev->dma_uses_io_tlb must be ordered before the + * presumed store. This guarantees that the returned buffer address + * cannot be passed to another CPU before updating dev->dma_uses_io_tlb. + * + * Second, the load from mem->pools must be ordered before the same + * presumed store. This guarantees that the returned buffer address + * cannot be observed by another CPU before an update of the RCU list + * that was made by swiotlb_dyn_alloc() on a third CPU (cf. multicopy + * atomicity). + * + * See also the comment in is_swiotlb_buffer(). + */ + smp_mb(); *retpool = pool; return index; -- cgit v1.2.3-58-ga151