From f2e2662ccf483392a1f7517258c3aa6539264d44 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 8 Mar 2022 11:15:14 +0200 Subject: net: dsa: felix: actually disable flooding towards NPI port The two blamed commits were written/tested individually but not together. When put together, commit 90897569beb1 ("net: dsa: felix: start off with flooding disabled on the CPU port"), which deletes a reinitialization of PGID_UC/PGID_MC/PGID_BC, is no longer sufficient to ensure that these port masks don't contain the CPU port module. This is because commit b903a6bd2e19 ("net: dsa: felix: migrate flood settings from NPI to tag_8021q CPU port") overwrites the hardware default settings towards the CPU port module with the settings that used to be present on the NPI port treated as a regular port. There, flooding is enabled, so flooding would get enabled on the CPU port module too. Adding conditional logic somewhere within felix_setup_tag_npi() to configure either the default no-flood policy or the flood policy inherited from the tag_8021q CPU port from a previous call to dsa_port_manage_cpu_flood() is getting complicated. So just let the migration logic do its thing during initial setup (which will temporarily turn on flooding), then turn flooding off for the NPI port after felix_set_tag_protocol() finishes. Here we are in felix_setup(), so the DSA slave interfaces are not yet created, and this doesn't affect traffic in any way. Fixes: 90897569beb1 ("net: dsa: felix: start off with flooding disabled on the CPU port") Fixes: b903a6bd2e19 ("net: dsa: felix: migrate flood settings from NPI to tag_8021q CPU port") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 2c58031e209c..e475186b70c7 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1343,6 +1343,7 @@ static int felix_setup(struct dsa_switch *ds) { struct ocelot *ocelot = ds->priv; struct felix *felix = ocelot_to_felix(ocelot); + unsigned long cpu_flood; struct dsa_port *dp; int err; @@ -1381,6 +1382,14 @@ static int felix_setup(struct dsa_switch *ds) * there's no real point in checking for errors. */ felix_set_tag_protocol(ds, dp->index, felix->tag_proto); + + /* Start off with flooding disabled towards the NPI port + * (actually CPU port module). + */ + cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)); + ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_UC); + ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_MC); + break; } -- cgit v1.2.3-58-ga151