From 89935315f192abf7068d0044cefc84f162c3c81f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 11 Mar 2014 22:40:27 +0800 Subject: PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures Before commit b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io() returns false, it means the the resource is not a memeory/IO resource. But after commit b355cee88e3b, those functions return false if the given memory/IO resource entry is invalid (the length of the resource is zero). This breaks pnpacpi_allocated_resource(), because it now recognizes the invalid memory/io resources as resources of unknown type. Thus users see confusing warning messages on machines with zero length ACPI memory/IO resources. Fix the problem by rearranging pnpacpi_allocated_resource() so that it calls acpi_dev_resource_memory() for memory type and IO type resources only, respectively. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Zhang Rui Reported-and-tested-by: Markus Trippelsdorf Reported-and-tested-by: Julian Wollrath Reported-and-tested-by: Paul Bolle [rjw: Changelog] Signed-off-by: Rafael J. Wysocki --- drivers/pnp/pnpacpi/rsparser.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 167f3d00c916..66977ebf13b3 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -183,9 +183,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, struct resource r = {0}; int i, flags; - if (acpi_dev_resource_memory(res, &r) - || acpi_dev_resource_io(res, &r) - || acpi_dev_resource_address_space(res, &r) + if (acpi_dev_resource_address_space(res, &r) || acpi_dev_resource_ext_address_space(res, &r)) { pnp_add_resource(dev, &r); return AE_OK; @@ -217,6 +215,17 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, } switch (res->type) { + case ACPI_RESOURCE_TYPE_MEMORY24: + case ACPI_RESOURCE_TYPE_MEMORY32: + case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: + if (acpi_dev_resource_memory(res, &r)) + pnp_add_resource(dev, &r); + break; + case ACPI_RESOURCE_TYPE_IO: + case ACPI_RESOURCE_TYPE_FIXED_IO: + if (acpi_dev_resource_io(res, &r)) + pnp_add_resource(dev, &r); + break; case ACPI_RESOURCE_TYPE_DMA: dma = &res->data.dma; if (dma->channel_count > 0 && dma->channels[0] != (u8) -1) -- cgit v1.2.3-58-ga151 From 2ed99e39cb9392312c100d9da591c20641c64d12 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Mar 2014 21:49:33 +0100 Subject: cpufreq: Skip current frequency initialization for ->setpolicy drivers After commit da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) __cpufreq_add_dev() sometimes fails for CPUs handled by intel_pstate, because that driver may return 0 from its ->get() callback if it has not run long enough to collect enough samples on the given CPU. That didn't happen before commit da60ce9f2fac which added policy->cur initialization to __cpufreq_add_dev() to help reduce code duplication in other cpufreq drivers. However, the code added by commit da60ce9f2fac need not be executed for cpufreq drivers having the ->setpolicy callback defined, because the subsequent invocation of cpufreq_set_policy() will use that callback to initialize the policy anyway and it doesn't need policy->cur to be initialized upfront. The analogous code in cpufreq_update_policy() is also unnecessary for cpufreq drivers having ->setpolicy set and may be skipped for them as well. Since intel_pstate provides ->setpolicy, skipping the upfront policy->cur initialization for cpufreq drivers with that callback set will cover intel_pstate and the problem it's been having after commit da60ce9f2fac will be addressed. Fixes: da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) References: https://bugzilla.kernel.org/show_bug.cgi?id=71931 Reported-and-tested-by: Patrik Lundquist Acked-by: Dirk Brandewie Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index cf485d928903..199b52b7c3e1 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1129,7 +1129,7 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif, per_cpu(cpufreq_cpu_data, j) = policy; write_unlock_irqrestore(&cpufreq_driver_lock, flags); - if (cpufreq_driver->get) { + if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { policy->cur = cpufreq_driver->get(policy->cpu); if (!policy->cur) { pr_err("%s: ->get() failed\n", __func__); @@ -2143,7 +2143,7 @@ int cpufreq_update_policy(unsigned int cpu) * BIOS might change freq behind our back * -> ask driver for current freq and notify governors about a change */ - if (cpufreq_driver->get) { + if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { new_policy.cur = cpufreq_driver->get(cpu); if (!policy->cur) { pr_debug("Driver did not initialize current freq"); -- cgit v1.2.3-58-ga151 From a4e90bed511220ff601d064c9e5d583e91308f65 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 13 Mar 2014 22:11:39 +0100 Subject: ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson Tested-by: Aubrey Li Cc: 3.4+ # 3.4+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index b718806657cd..c40fb2e81bbc 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -71,6 +71,17 @@ static int acpi_sleep_prepare(u32 acpi_state) return 0; } +static bool acpi_sleep_state_supported(u8 sleep_state) +{ + acpi_status status; + u8 type_a, type_b; + + status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b); + return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware + || (acpi_gbl_FADT.sleep_control.address + && acpi_gbl_FADT.sleep_status.address)); +} + #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; @@ -604,15 +615,9 @@ static void acpi_sleep_suspend_setup(void) { int i; - for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { - acpi_status status; - u8 type_a, type_b; - - status = acpi_get_sleep_type_data(i, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { + for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) + if (acpi_sleep_state_supported(i)) sleep_states[i] = 1; - } - } suspend_set_ops(old_suspend_ordering ? &acpi_suspend_ops_old : &acpi_suspend_ops); @@ -740,11 +745,7 @@ static const struct platform_hibernation_ops acpi_hibernation_ops_old = { static void acpi_sleep_hibernate_setup(void) { - acpi_status status; - u8 type_a, type_b; - - status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); - if (ACPI_FAILURE(status)) + if (!acpi_sleep_state_supported(ACPI_STATE_S4)) return; hibernation_set_ops(old_suspend_ordering ? @@ -793,8 +794,6 @@ static void acpi_power_off(void) int __init acpi_sleep_init(void) { - acpi_status status; - u8 type_a, type_b; char supported[ACPI_S_STATE_COUNT * 3 + 1]; char *pos = supported; int i; @@ -806,8 +805,7 @@ int __init acpi_sleep_init(void) acpi_sleep_suspend_setup(); acpi_sleep_hibernate_setup(); - status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { + if (acpi_sleep_state_supported(ACPI_STATE_S5)) { sleep_states[ACPI_STATE_S5] = 1; pm_power_off_prepare = acpi_power_off_prepare; pm_power_off = acpi_power_off; -- cgit v1.2.3-58-ga151