From 0e3d84a500d4e1672332b4961b98c35f6168e6f1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 13 Oct 2008 21:39:41 +0200 Subject: ide: factor out reset error reporting from reset_pollfunc() Factor out reset error reporting from reset_pollfunc() to ide_reset_report_error() helper. While at it: - fix KERN_* printk() levels - remove 'switch ()' Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 40 +++++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 19 deletions(-) (limited to 'drivers/ide/ide-iops.c') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 925fd037cdde..91182ebed468 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -940,6 +940,25 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) return ide_stopped; } +static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) +{ + static const char *err_master_vals[] = + { NULL, "passed", "formatter device error", + "sector buffer error", "ECC circuitry error", + "controlling MPU error" }; + + u8 err_master = err & 0x7f; + + printk(KERN_ERR "%s: reset: master: ", hwif->name); + if (err_master && err_master < 6) + printk(KERN_CONT "%s", err_master_vals[err_master]); + else + printk(KERN_CONT "error (0x%02x?)", err); + if (err & 0x80) + printk(KERN_CONT "; slave: failed"); + printk(KERN_CONT "\n"); +} + /* * reset_pollfunc() gets invoked to poll the interface for completion every 50ms * during an ide reset operation. If the drives have not yet responded, @@ -975,31 +994,14 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) drive->failures++; err = -EIO; } else { - printk("%s: reset: ", hwif->name); tmp = ide_read_error(drive); if (tmp == 1) { - printk("success\n"); + printk(KERN_INFO "%s: reset: success\n", hwif->name); drive->failures = 0; } else { + ide_reset_report_error(hwif, tmp); drive->failures++; - printk("master: "); - switch (tmp & 0x7f) { - case 1: printk("passed"); - break; - case 2: printk("formatter device error"); - break; - case 3: printk("sector buffer error"); - break; - case 4: printk("ECC circuitry error"); - break; - case 5: printk("controlling MPU error"); - break; - default:printk("error (0x%02x?)", tmp); - } - if (tmp & 0x80) - printk("; slave: failed"); - printk("\n"); err = -EIO; } } -- cgit v1.2.3-58-ga151