From 70760e80db06247b0c7b1933a9be81b5c22fc25e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Dec 2021 03:04:22 +0100 Subject: hwmon: (ntc_thermistor) Switch to generic firmware props This switches to retrieveing the configuration of the NTC from generic firmware properties so that we get neutral from device tree: now ACPI or, more importantly, software nodes can be used to spawn NTC devices provided they have the required properties. This was inspired by the similar changes made to the IIO drivers. This was tested on the Ux500 HREF with the NTC devices probing from device tree just as fine after this as before. Cc: Peter Rosin Cc: Chris Lesiak Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck --- drivers/hwmon/ntc_thermistor.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 12435ef66530..0c8b3dbcb38b 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -9,10 +9,10 @@ #include #include #include +#include #include +#include #include -#include -#include #include #include #include @@ -595,12 +595,11 @@ static const struct hwmon_chip_info ntc_chip_info = { .info = ntc_info, }; -static int ntc_thermistor_parse_dt(struct device *dev, - struct ntc_data *data) +static int ntc_thermistor_parse_props(struct device *dev, + struct ntc_data *data) { struct iio_channel *chan; enum iio_chan_type type; - struct device_node *np = dev->of_node; int ret; chan = devm_iio_channel_get(dev, NULL); @@ -614,14 +613,19 @@ static int ntc_thermistor_parse_dt(struct device *dev, if (type != IIO_VOLTAGE) return -EINVAL; - if (of_property_read_u32(np, "pullup-uv", &data->pullup_uv)) - return -ENODEV; - if (of_property_read_u32(np, "pullup-ohm", &data->pullup_ohm)) - return -ENODEV; - if (of_property_read_u32(np, "pulldown-ohm", &data->pulldown_ohm)) - return -ENODEV; + ret = device_property_read_u32(dev, "pullup-uv", &data->pullup_uv); + if (ret) + return dev_err_probe(dev, ret, "pullup-uv not specified\n"); + + ret = device_property_read_u32(dev, "pullup-ohm", &data->pullup_ohm); + if (ret) + return dev_err_probe(dev, ret, "pullup-ohm not specified\n"); + + ret = device_property_read_u32(dev, "pulldown-ohm", &data->pulldown_ohm); + if (ret) + return dev_err_probe(dev, ret, "pulldown-ohm not specified\n"); - if (of_find_property(np, "connected-positive", NULL)) + if (device_property_read_bool(dev, "connected-positive")) data->connect = NTC_CONNECTED_POSITIVE; else /* status change should be possible if not always on. */ data->connect = NTC_CONNECTED_GROUND; @@ -634,8 +638,6 @@ static int ntc_thermistor_parse_dt(struct device *dev, static int ntc_thermistor_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - const struct of_device_id *of_id = - of_match_device(of_match_ptr(ntc_match), dev); const struct platform_device_id *pdev_id; struct device *hwmon_dev; struct ntc_data *data; @@ -645,7 +647,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - ret = ntc_thermistor_parse_dt(dev, data); + ret = ntc_thermistor_parse_props(dev, data); if (ret) return ret; @@ -660,7 +662,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) return -EINVAL; } - pdev_id = of_id ? of_id->data : platform_get_device_id(pdev); + pdev_id = device_get_match_data(dev); if (pdev_id->driver_data >= ARRAY_SIZE(ntc_type)) { dev_err(dev, "Unknown device type: %lu(%s)\n", @@ -688,7 +690,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) static struct platform_driver ntc_thermistor_driver = { .driver = { .name = "ntc-thermistor", - .of_match_table = of_match_ptr(ntc_match), + .of_match_table = ntc_match, }, .probe = ntc_thermistor_probe, .id_table = ntc_thermistor_id, -- cgit v1.2.3-58-ga151