From f42259ef810ce83f3e1a8ea4ce12dfda873fbe44 Mon Sep 17 00:00:00 2001
From: Hang Yuan <hang.yuan@linux.intel.com>
Date: Wed, 19 Sep 2018 14:42:09 +0800
Subject: drm/i915/gvt: invalidate old ggtt page when update ggtt entry

Previously only cancelled dma map of a ggtt page when the ggtt entry was
cleared. This patch will cancel dma map of an old ggtt page as well when
the ggtt entry is updated with new page address.

Fixes: 7598e8700e9a(drm/i915/gvt: Missed to cancel dma map for ggtt entries)
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
---
 drivers/gpu/drm/i915/gvt/gtt.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 00aad8164dec..c11e353ca904 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -2259,16 +2259,18 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
 		} else
 			ops->set_pfn(&m, dma_addr >> PAGE_SHIFT);
 	} else {
-		ggtt_get_host_entry(ggtt_mm, &m, g_gtt_index);
-		ggtt_invalidate_pte(vgpu, &m);
 		ops->set_pfn(&m, gvt->gtt.scratch_mfn);
 		ops->clear_present(&m);
 	}
 
 out:
+	ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
+
+	ggtt_get_host_entry(ggtt_mm, &e, g_gtt_index);
+	ggtt_invalidate_pte(vgpu, &e);
+
 	ggtt_set_host_entry(ggtt_mm, &m, g_gtt_index);
 	ggtt_invalidate(gvt->dev_priv);
-	ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
 	return 0;
 }
 
-- 
cgit v1.2.3-58-ga151


From bc0686ff5fad7a842cc88377439e78be87fedc80 Mon Sep 17 00:00:00 2001
From: Hang Yuan <hang.yuan@linux.intel.com>
Date: Wed, 19 Sep 2018 14:42:10 +0800
Subject: drm/i915/gvt: support inconsecutive partial gtt entry write

Previously we assumed two 4-byte writes to the same PTE coming in sequence.
But recently we observed inconsecutive partial write happening as well. So
this patch enhances the previous solution. It now uses a list to save more
partial writes. If one partial write can be combined with another one in
the list to construct a full PTE, update its shadow entry. Otherwise, save
the partial write in the list.

v2: invalidate old entry and flush ggtt (Zhenyu)
v3: split old ggtt page unmap to another patch (Zhenyu)
v4: refine codes (Zhenyu)

Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiaolin Zhang <xiaolin.zhang@intel.com>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
---
 drivers/gpu/drm/i915/gvt/gtt.c | 107 ++++++++++++++++++++---------------------
 drivers/gpu/drm/i915/gvt/gtt.h |   9 +++-
 2 files changed, 60 insertions(+), 56 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index c11e353ca904..919de5a1bafb 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -1901,7 +1901,6 @@ static struct intel_vgpu_mm *intel_vgpu_create_ggtt_mm(struct intel_vgpu *vgpu)
 		vgpu_free_mm(mm);
 		return ERR_PTR(-ENOMEM);
 	}
-	mm->ggtt_mm.last_partial_off = -1UL;
 
 	return mm;
 }
@@ -1926,7 +1925,6 @@ void _intel_vgpu_mm_release(struct kref *mm_ref)
 		invalidate_ppgtt_mm(mm);
 	} else {
 		vfree(mm->ggtt_mm.virtual_ggtt);
-		mm->ggtt_mm.last_partial_off = -1UL;
 	}
 
 	vgpu_free_mm(mm);
@@ -2164,6 +2162,8 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
 	struct intel_gvt_gtt_entry e, m;
 	dma_addr_t dma_addr;
 	int ret;
+	struct intel_gvt_partial_pte *partial_pte, *pos, *n;
+	bool partial_update = false;
 
 	if (bytes != 4 && bytes != 8)
 		return -EINVAL;
@@ -2174,68 +2174,57 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
 	if (!vgpu_gmadr_is_valid(vgpu, gma))
 		return 0;
 
-	ggtt_get_guest_entry(ggtt_mm, &e, g_gtt_index);
-
+	e.type = GTT_TYPE_GGTT_PTE;
 	memcpy((void *)&e.val64 + (off & (info->gtt_entry_size - 1)), p_data,
 			bytes);
 
 	/* If ggtt entry size is 8 bytes, and it's split into two 4 bytes
-	 * write, we assume the two 4 bytes writes are consecutive.
-	 * Otherwise, we abort and report error
+	 * write, save the first 4 bytes in a list and update virtual
+	 * PTE. Only update shadow PTE when the second 4 bytes comes.
 	 */
 	if (bytes < info->gtt_entry_size) {
-		if (ggtt_mm->ggtt_mm.last_partial_off == -1UL) {
-			/* the first partial part*/
-			ggtt_mm->ggtt_mm.last_partial_off = off;
-			ggtt_mm->ggtt_mm.last_partial_data = e.val64;
-			return 0;
-		} else if ((g_gtt_index ==
-				(ggtt_mm->ggtt_mm.last_partial_off >>
-				info->gtt_entry_size_shift)) &&
-			(off !=	ggtt_mm->ggtt_mm.last_partial_off)) {
-			/* the second partial part */
-
-			int last_off = ggtt_mm->ggtt_mm.last_partial_off &
-				(info->gtt_entry_size - 1);
-
-			memcpy((void *)&e.val64 + last_off,
-				(void *)&ggtt_mm->ggtt_mm.last_partial_data +
-				last_off, bytes);
-
-			ggtt_mm->ggtt_mm.last_partial_off = -1UL;
-		} else {
-			int last_offset;
-
-			gvt_vgpu_err("failed to populate guest ggtt entry: abnormal ggtt entry write sequence, last_partial_off=%lx, offset=%x, bytes=%d, ggtt entry size=%d\n",
-					ggtt_mm->ggtt_mm.last_partial_off, off,
-					bytes, info->gtt_entry_size);
-
-			/* set host ggtt entry to scratch page and clear
-			 * virtual ggtt entry as not present for last
-			 * partially write offset
-			 */
-			last_offset = ggtt_mm->ggtt_mm.last_partial_off &
-					(~(info->gtt_entry_size - 1));
-
-			ggtt_get_host_entry(ggtt_mm, &m, last_offset);
-			ggtt_invalidate_pte(vgpu, &m);
-			ops->set_pfn(&m, gvt->gtt.scratch_mfn);
-			ops->clear_present(&m);
-			ggtt_set_host_entry(ggtt_mm, &m, last_offset);
-			ggtt_invalidate(gvt->dev_priv);
-
-			ggtt_get_guest_entry(ggtt_mm, &e, last_offset);
-			ops->clear_present(&e);
-			ggtt_set_guest_entry(ggtt_mm, &e, last_offset);
-
-			ggtt_mm->ggtt_mm.last_partial_off = off;
-			ggtt_mm->ggtt_mm.last_partial_data = e.val64;
+		bool found = false;
+
+		list_for_each_entry_safe(pos, n,
+				&ggtt_mm->ggtt_mm.partial_pte_list, list) {
+			if (g_gtt_index == pos->offset >>
+					info->gtt_entry_size_shift) {
+				if (off != pos->offset) {
+					/* the second partial part*/
+					int last_off = pos->offset &
+						(info->gtt_entry_size - 1);
+
+					memcpy((void *)&e.val64 + last_off,
+						(void *)&pos->data + last_off,
+						bytes);
+
+					list_del(&pos->list);
+					kfree(pos);
+					found = true;
+					break;
+				}
+
+				/* update of the first partial part */
+				pos->data = e.val64;
+				ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index);
+				return 0;
+			}
+		}
 
-			return 0;
+		if (!found) {
+			/* the first partial part */
+			partial_pte = kzalloc(sizeof(*partial_pte), GFP_KERNEL);
+			if (!partial_pte)
+				return -ENOMEM;
+			partial_pte->offset = off;
+			partial_pte->data = e.val64;
+			list_add_tail(&partial_pte->list,
+				&ggtt_mm->ggtt_mm.partial_pte_list);
+			partial_update = true;
 		}
 	}
 
-	if (ops->test_present(&e)) {
+	if (!partial_update && (ops->test_present(&e))) {
 		gfn = ops->get_pfn(&e);
 		m = e;
 
@@ -2428,6 +2417,8 @@ int intel_vgpu_init_gtt(struct intel_vgpu *vgpu)
 
 	intel_vgpu_reset_ggtt(vgpu, false);
 
+	INIT_LIST_HEAD(&gtt->ggtt_mm->ggtt_mm.partial_pte_list);
+
 	return create_scratch_page_tree(vgpu);
 }
 
@@ -2452,6 +2443,14 @@ static void intel_vgpu_destroy_all_ppgtt_mm(struct intel_vgpu *vgpu)
 
 static void intel_vgpu_destroy_ggtt_mm(struct intel_vgpu *vgpu)
 {
+	struct intel_gvt_partial_pte *pos;
+
+	list_for_each_entry(pos,
+			&vgpu->gtt.ggtt_mm->ggtt_mm.partial_pte_list, list) {
+		gvt_dbg_mm("partial PTE update on hold 0x%lx : 0x%llx\n",
+			pos->offset, pos->data);
+		kfree(pos);
+	}
 	intel_vgpu_destroy_mm(vgpu->gtt.ggtt_mm);
 	vgpu->gtt.ggtt_mm = NULL;
 }
diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h
index 7a9b36176efb..a11bfee1e0c8 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.h
+++ b/drivers/gpu/drm/i915/gvt/gtt.h
@@ -133,6 +133,12 @@ enum intel_gvt_mm_type {
 
 #define GVT_RING_CTX_NR_PDPS	GEN8_3LVL_PDPES
 
+struct intel_gvt_partial_pte {
+	unsigned long offset;
+	u64 data;
+	struct list_head list;
+};
+
 struct intel_vgpu_mm {
 	enum intel_gvt_mm_type type;
 	struct intel_vgpu *vgpu;
@@ -157,8 +163,7 @@ struct intel_vgpu_mm {
 		} ppgtt_mm;
 		struct {
 			void *virtual_ggtt;
-			unsigned long last_partial_off;
-			u64 last_partial_data;
+			struct list_head partial_pte_list;
 		} ggtt_mm;
 	};
 };
-- 
cgit v1.2.3-58-ga151


From 606a745944bc0ebd14f77dfc61ac7d6cb685cefe Mon Sep 17 00:00:00 2001
From: Xinyun Liu <xinyun.liu@intel.com>
Date: Wed, 19 Sep 2018 15:28:53 +0800
Subject: drm/i915/gvt: correct mask setting for CSFE_CHICKEN1

CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT
conformance check test:

[drm:intel_gvt_vgpu_conformance_check]
	*ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4

Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
---
 drivers/gpu/drm/i915/gvt/mmio_context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c
index e872f4847fbe..088a62ab2bc8 100644
--- a/drivers/gpu/drm/i915/gvt/mmio_context.c
+++ b/drivers/gpu/drm/i915/gvt/mmio_context.c
@@ -144,7 +144,7 @@ static struct engine_mmio gen9_engine_mmio_list[] __cacheline_aligned = {
 	{RCS, GAMT_CHKN_BIT_REG, 0x0, false}, /* 0x4ab8 */
 
 	{RCS, GEN9_GAMT_ECO_REG_RW_IA, 0x0, false}, /* 0x4ab0 */
-	{RCS, GEN9_CSFE_CHICKEN1_RCS, 0x0, false}, /* 0x20d4 */
+	{RCS, GEN9_CSFE_CHICKEN1_RCS, 0xffff, false}, /* 0x20d4 */
 
 	{RCS, GEN8_GARBCNTL, 0x0, false}, /* 0xb004 */
 	{RCS, GEN7_FF_THREAD_MODE, 0x0, false}, /* 0x20a0 */
-- 
cgit v1.2.3-58-ga151


From 5e7154ff5e8e21dc9acac4f8dba7533552365374 Mon Sep 17 00:00:00 2001
From: Longhe Zheng <longhe.zheng@intel.com>
Date: Tue, 30 Oct 2018 16:12:10 +0800
Subject: drm/i915/gvt: Handle values of EDP_PSR_IMR and EDP_PSR_IIR

GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR
and EDP_PSR_IIR registers as default MMIO read/write.
So guest won't get expected initial values of these registers when
initializing the gpu driver, which results in following warning and logs.

--------
Interrupt register 0x64838 is not zero: 0xffffffff
WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177
gen3_assert_iir_is_zero+0x38/0xa0

Call Trace:
gen8_de_irq_postinstall+0xa7/0x400
gen8_irq_postinstall+0x27/0x80
drm_irq_install+0xbc/0x140
i915_driver_load+0xa9d/0xd50
--------
Because GVT-g does not handle EDP(embedded DP) simulation for guests,
always set EDP_PSR_IMR and EDP_PSR_IIR to value 0.

Signed-off-by: Longhe Zheng <longhe.zheng@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
---
 drivers/gpu/drm/i915/gvt/handlers.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index 94c1089ecf59..f9002cb1f2a3 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -1608,7 +1608,7 @@ static int bxt_gt_disp_pwron_write(struct intel_vgpu *vgpu,
 	return 0;
 }
 
-static int bxt_edp_psr_imr_iir_write(struct intel_vgpu *vgpu,
+static int edp_psr_imr_iir_write(struct intel_vgpu *vgpu,
 		unsigned int offset, void *p_data, unsigned int bytes)
 {
 	vgpu_vreg(vgpu, offset) = 0;
@@ -2613,6 +2613,9 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
 	MMIO_DFH(_MMIO(0x1a178), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
 	MMIO_DFH(_MMIO(0x1a17c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
 	MMIO_DFH(_MMIO(0x2217c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
+
+	MMIO_DH(EDP_PSR_IMR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write);
+	MMIO_DH(EDP_PSR_IIR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write);
 	return 0;
 }
 
@@ -3216,9 +3219,6 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt)
 	MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_B), D_BXT);
 	MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_C), D_BXT);
 
-	MMIO_DH(EDP_PSR_IMR, D_BXT, NULL, bxt_edp_psr_imr_iir_write);
-	MMIO_DH(EDP_PSR_IIR, D_BXT, NULL, bxt_edp_psr_imr_iir_write);
-
 	MMIO_D(RC6_CTX_BASE, D_BXT);
 
 	MMIO_D(GEN8_PUSHBUS_CONTROL, D_BXT);
-- 
cgit v1.2.3-58-ga151


From 8727b230f665cadb9349a915c60e6abb18fb083c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Sat, 13 Oct 2018 13:21:40 +0300
Subject: drm/exynos: checking for NULL instead of IS_ERR()

The of_drm_find_panel() function returns error pointers and never NULL
but we the driver assumes that ->panel is NULL when it's not present.

Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 07af7758066d..32f256749789 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1527,7 +1527,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 		}
 
 		dsi->panel = of_drm_find_panel(device->dev.of_node);
-		if (dsi->panel) {
+		if (IS_ERR(dsi->panel)) {
+			dsi->panel = NULL;
+		} else {
 			drm_panel_attach(dsi->panel, &dsi->connector);
 			dsi->connector.status = connector_status_connected;
 		}
-- 
cgit v1.2.3-58-ga151


From 6ca469e22a30992b4478d2ab88737c70667c1e00 Mon Sep 17 00:00:00 2001
From: Inki Dae <inki.dae@samsung.com>
Date: Fri, 5 Oct 2018 11:50:20 +0900
Subject: Revert "drm/exynos/decon5433: implement frame counter"

This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b

This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.

However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.

Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 drivers/gpu/drm/exynos/exynos5433_drm_decon.c |  9 ---------
 drivers/gpu/drm/exynos/exynos_drm_crtc.c      | 11 -----------
 drivers/gpu/drm/exynos/exynos_drm_drv.h       |  1 -
 3 files changed, 21 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 94529aa82339..aef487dd8731 100644
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -164,13 +164,6 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
 	return frm;
 }
 
-static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc)
-{
-	struct decon_context *ctx = crtc->ctx;
-
-	return decon_get_frame_count(ctx, false);
-}
-
 static void decon_setup_trigger(struct decon_context *ctx)
 {
 	if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
@@ -536,7 +529,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
 	.disable		= decon_disable,
 	.enable_vblank		= decon_enable_vblank,
 	.disable_vblank		= decon_disable_vblank,
-	.get_vblank_counter	= decon_get_vblank_counter,
 	.atomic_begin		= decon_atomic_begin,
 	.update_plane		= decon_update_plane,
 	.disable_plane		= decon_disable_plane,
@@ -554,7 +546,6 @@ static int decon_bind(struct device *dev, struct device *master, void *data)
 	int ret;
 
 	ctx->drm_dev = drm_dev;
-	drm_dev->max_vblank_count = 0xffffffff;
 
 	for (win = ctx->first_win; win < WINDOWS_NR; win++) {
 		ctx->configs[win].pixel_formats = decon_formats;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index eea90251808f..2696289ecc78 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -162,16 +162,6 @@ static void exynos_drm_crtc_disable_vblank(struct drm_crtc *crtc)
 		exynos_crtc->ops->disable_vblank(exynos_crtc);
 }
 
-static u32 exynos_drm_crtc_get_vblank_counter(struct drm_crtc *crtc)
-{
-	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-
-	if (exynos_crtc->ops->get_vblank_counter)
-		return exynos_crtc->ops->get_vblank_counter(exynos_crtc);
-
-	return 0;
-}
-
 static const struct drm_crtc_funcs exynos_crtc_funcs = {
 	.set_config	= drm_atomic_helper_set_config,
 	.page_flip	= drm_atomic_helper_page_flip,
@@ -181,7 +171,6 @@ static const struct drm_crtc_funcs exynos_crtc_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
 	.enable_vblank = exynos_drm_crtc_enable_vblank,
 	.disable_vblank = exynos_drm_crtc_disable_vblank,
-	.get_vblank_counter = exynos_drm_crtc_get_vblank_counter,
 };
 
 struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index ec9604f1272b..5e61e707f955 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -135,7 +135,6 @@ struct exynos_drm_crtc_ops {
 	void (*disable)(struct exynos_drm_crtc *crtc);
 	int (*enable_vblank)(struct exynos_drm_crtc *crtc);
 	void (*disable_vblank)(struct exynos_drm_crtc *crtc);
-	u32 (*get_vblank_counter)(struct exynos_drm_crtc *crtc);
 	enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
 		const struct drm_display_mode *mode);
 	bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
-- 
cgit v1.2.3-58-ga151


From deee3284cba3145a4ee03cbe8541d7a3bfc499e2 Mon Sep 17 00:00:00 2001
From: Andrzej Hajda <a.hajda@samsung.com>
Date: Fri, 26 Oct 2018 12:40:03 +0200
Subject: drm/exynos/dsi: register connector if it is created after drm bind

DSI device can be attached after DRM device is registered. In such
case newly created connector must be registered by exynos_dsi.
The patch fixes exynos_drm on rinato and trats boards.

Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 32f256749789..d81e62ae286a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -14,6 +14,7 @@
 
 #include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_atomic_helper.h>
@@ -1474,12 +1475,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder)
 {
 	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
 	struct drm_connector *connector = &dsi->connector;
+	struct drm_device *drm = encoder->dev;
 	int ret;
 
 	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
-	ret = drm_connector_init(encoder->dev, connector,
-				 &exynos_dsi_connector_funcs,
+	ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs,
 				 DRM_MODE_CONNECTOR_DSI);
 	if (ret) {
 		DRM_ERROR("Failed to initialize connector with drm\n");
@@ -1489,7 +1490,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder)
 	connector->status = connector_status_disconnected;
 	drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs);
 	drm_connector_attach_encoder(connector, encoder);
+	if (!drm->registered)
+		return 0;
 
+	connector->funcs->reset(connector);
+	drm_fb_helper_add_one_connector(drm->fb_helper, connector);
+	drm_connector_register(connector);
 	return 0;
 }
 
-- 
cgit v1.2.3-58-ga151


From 989534cfcac89f927fa46b1e0861d92ffbd2c7e4 Mon Sep 17 00:00:00 2001
From: Andrzej Hajda <a.hajda@samsung.com>
Date: Fri, 26 Oct 2018 12:13:28 +0200
Subject: drm/exynos/fbdev: do not skip fbdev init if there are no connectors

Since connectors can be created dynamically, fbdev should be initialized
even if there are no connectors at the moment. Otherwise fbdev will
not be created even after connector's appearance.
The patch fixes lack of fbdev on rinato and trats boards.

Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 918dd2c82209..01d182289efa 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -192,7 +192,7 @@ int exynos_drm_fbdev_init(struct drm_device *dev)
 	struct drm_fb_helper *helper;
 	int ret;
 
-	if (!dev->mode_config.num_crtc || !dev->mode_config.num_connector)
+	if (!dev->mode_config.num_crtc)
 		return 0;
 
 	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
-- 
cgit v1.2.3-58-ga151


From 6fce3a406108ee6c8a61e2a33e52e9198a626ea0 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Thu, 4 Oct 2018 11:37:00 +0200
Subject: drm/etnaviv: fix bogus fence complete check in timeout handler

The GPU hardware fences and the job out-fences are on different timelines
so it's wrong to compare them. Fix this by only looking at the out-fence.

Cc: <stable@vger.kernel.org>
Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job
                     timeout handler)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/gpu/drm/etnaviv/etnaviv_sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
index 69e9b431bf1f..e5a9fae31ab7 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -93,7 +93,7 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job)
 	 * If the GPU managed to complete this jobs fence, the timout is
 	 * spurious. Bail out.
 	 */
-	if (fence_completed(gpu, submit->out_fence->seqno))
+	if (dma_fence_is_signaled(submit->out_fence))
 		return;
 
 	/*
-- 
cgit v1.2.3-58-ga151


From 18354b422ce4ce1124277dfe8f4f094bae0102ad Mon Sep 17 00:00:00 2001
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Tue, 23 Oct 2018 21:21:02 +0300
Subject: drm/i915: Don't apply the 16Gb DIMM wm latency w/a to BXT/GLK
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to
the appropriate platforms.

This was especially harsh on GLK since we don't even try to read
the DIMM information on that platforms, hence valid_dimm was
always false and thus we always tried to apply the w/a.
Furthermore the w/a pushed the level 0 latency above the
level 1 latency, which doesn't really make sense.

v2: Do the check when populating is_16gb_dimm (Mahesh)

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 86b592876cb6 ("drm/i915: Implement 16GB dimm wa for latency level-0")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
(cherry picked from commit 5d6f36b27d2764f3dc940606ee6b7ec5c669af3e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 15 ++++++++-------
 drivers/gpu/drm/i915/i915_drv.h |  1 -
 drivers/gpu/drm/i915/intel_pm.c |  3 +--
 3 files changed, 9 insertions(+), 10 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 44e2c0f5ec50..ffdbbac4400e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1175,8 +1175,6 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
-	dram_info->valid_dimm = true;
-
 	/*
 	 * If any of the channel is single rank channel, worst case output
 	 * will be same as if single rank memory, so consider single rank
@@ -1193,8 +1191,7 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
-	if (ch0.is_16gb_dimm || ch1.is_16gb_dimm)
-		dram_info->is_16gb_dimm = true;
+	dram_info->is_16gb_dimm = ch0.is_16gb_dimm || ch1.is_16gb_dimm;
 
 	dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0,
 								       val_ch1,
@@ -1314,7 +1311,6 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv)
 		return -EINVAL;
 	}
 
-	dram_info->valid_dimm = true;
 	dram_info->valid = true;
 	return 0;
 }
@@ -1327,12 +1323,17 @@ intel_get_dram_info(struct drm_i915_private *dev_priv)
 	int ret;
 
 	dram_info->valid = false;
-	dram_info->valid_dimm = false;
-	dram_info->is_16gb_dimm = false;
 	dram_info->rank = I915_DRAM_RANK_INVALID;
 	dram_info->bandwidth_kbps = 0;
 	dram_info->num_channels = 0;
 
+	/*
+	 * Assume 16Gb DIMMs are present until proven otherwise.
+	 * This is only used for the level 0 watermark latency
+	 * w/a which does not apply to bxt/glk.
+	 */
+	dram_info->is_16gb_dimm = !IS_GEN9_LP(dev_priv);
+
 	if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv))
 		return;
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8624b4bdc242..9102571e9692 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1948,7 +1948,6 @@ struct drm_i915_private {
 
 	struct dram_info {
 		bool valid;
-		bool valid_dimm;
 		bool is_16gb_dimm;
 		u8 num_channels;
 		enum dram_rank {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 1db9b8328275..245f0022bcfd 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2881,8 +2881,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
 		 * any underrun. If not able to get Dimm info assume 16GB dimm
 		 * to avoid any underrun.
 		 */
-		if (!dev_priv->dram_info.valid_dimm ||
-		    dev_priv->dram_info.is_16gb_dimm)
+		if (dev_priv->dram_info.is_16gb_dimm)
 			wm[0] += 1;
 
 	} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
-- 
cgit v1.2.3-58-ga151


From 6503493145cba4413ecd3d4d153faeef4a1e9b85 Mon Sep 17 00:00:00 2001
From: Clint Taylor <clinton.a.taylor@intel.com>
Date: Thu, 25 Oct 2018 11:52:00 -0700
Subject: drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values

HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value
mode instead of HDMI specification values.

V2: Fix 88.2 Hz N value

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_audio.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 769f3f586661..ee3ca2de983b 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -144,6 +144,9 @@ static const struct {
 /* HDMI N/CTS table */
 #define TMDS_297M 297000
 #define TMDS_296M 296703
+#define TMDS_594M 594000
+#define TMDS_593M 593407
+
 static const struct {
 	int sample_rate;
 	int clock;
@@ -164,6 +167,20 @@ static const struct {
 	{ 176400, TMDS_297M, 18816, 247500 },
 	{ 192000, TMDS_296M, 23296, 281250 },
 	{ 192000, TMDS_297M, 20480, 247500 },
+	{ 44100, TMDS_593M, 8918, 937500 },
+	{ 44100, TMDS_594M, 9408, 990000 },
+	{ 48000, TMDS_593M, 5824, 562500 },
+	{ 48000, TMDS_594M, 6144, 594000 },
+	{ 32000, TMDS_593M, 5824, 843750 },
+	{ 32000, TMDS_594M, 3072, 445500 },
+	{ 88200, TMDS_593M, 17836, 937500 },
+	{ 88200, TMDS_594M, 18816, 990000 },
+	{ 96000, TMDS_593M, 11648, 562500 },
+	{ 96000, TMDS_594M, 12288, 594000 },
+	{ 176400, TMDS_593M, 35672, 937500 },
+	{ 176400, TMDS_594M, 37632, 990000 },
+	{ 192000, TMDS_593M, 23296, 562500 },
+	{ 192000, TMDS_594M, 24576, 594000 },
 };
 
 /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
-- 
cgit v1.2.3-58-ga151


From c58281056a8b26d5d9dc15c19859a7880835ef44 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 25 Oct 2018 10:18:22 +0100
Subject: drm/i915: Mark up GTT sizes as u64

Since we use a 64b virtual GTT irrespective of the system, we want to
ensure that the GTT computations remains 64b even on 32b systems,
including treatment of huge virtual pages.

No code generation changes on 64b:

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk
(cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_gem_gtt.c           | 2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.h           | 6 +++---
 drivers/gpu/drm/i915/selftests/huge_pages.c   | 2 +-
 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c | 6 +++---
 4 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 56c7f8637311..47c302543799 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -1757,7 +1757,7 @@ static void gen6_dump_ppgtt(struct i915_hw_ppgtt *base, struct seq_file *m)
 			if (i == 4)
 				continue;
 
-			seq_printf(m, "\t\t(%03d, %04d) %08lx: ",
+			seq_printf(m, "\t\t(%03d, %04d) %08llx: ",
 				   pde, pte,
 				   (pde * GEN6_PTES + pte) * I915_GTT_PAGE_SIZE);
 			for (i = 0; i < 4; i++) {
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index 7e2af5f4f39b..aa8307043036 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -42,9 +42,9 @@
 #include "i915_selftest.h"
 #include "i915_timeline.h"
 
-#define I915_GTT_PAGE_SIZE_4K BIT(12)
-#define I915_GTT_PAGE_SIZE_64K BIT(16)
-#define I915_GTT_PAGE_SIZE_2M BIT(21)
+#define I915_GTT_PAGE_SIZE_4K	BIT_ULL(12)
+#define I915_GTT_PAGE_SIZE_64K	BIT_ULL(16)
+#define I915_GTT_PAGE_SIZE_2M	BIT_ULL(21)
 
 #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K
 #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M
diff --git a/drivers/gpu/drm/i915/selftests/huge_pages.c b/drivers/gpu/drm/i915/selftests/huge_pages.c
index 8d03f64eabd7..5c22f2c8d4cf 100644
--- a/drivers/gpu/drm/i915/selftests/huge_pages.c
+++ b/drivers/gpu/drm/i915/selftests/huge_pages.c
@@ -551,7 +551,7 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg)
 			err = igt_check_page_sizes(vma);
 
 			if (vma->page_sizes.gtt != I915_GTT_PAGE_SIZE_4K) {
-				pr_err("page_sizes.gtt=%u, expected %lu\n",
+				pr_err("page_sizes.gtt=%u, expected %llu\n",
 				       vma->page_sizes.gtt, I915_GTT_PAGE_SIZE_4K);
 				err = -EINVAL;
 			}
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
index 8e2e269db97e..127d81513671 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c
@@ -1337,7 +1337,7 @@ static int igt_gtt_reserve(void *arg)
 		GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
 		if (vma->node.start != total ||
 		    vma->node.size != 2*I915_GTT_PAGE_SIZE) {
-			pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+			pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
 			       vma->node.start, vma->node.size,
 			       total, 2*I915_GTT_PAGE_SIZE);
 			err = -EINVAL;
@@ -1386,7 +1386,7 @@ static int igt_gtt_reserve(void *arg)
 		GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
 		if (vma->node.start != total ||
 		    vma->node.size != 2*I915_GTT_PAGE_SIZE) {
-			pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+			pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
 			       vma->node.start, vma->node.size,
 			       total, 2*I915_GTT_PAGE_SIZE);
 			err = -EINVAL;
@@ -1430,7 +1430,7 @@ static int igt_gtt_reserve(void *arg)
 		GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
 		if (vma->node.start != offset ||
 		    vma->node.size != 2*I915_GTT_PAGE_SIZE) {
-			pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %lx)\n",
+			pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",
 			       vma->node.start, vma->node.size,
 			       offset, 2*I915_GTT_PAGE_SIZE);
 			err = -EINVAL;
-- 
cgit v1.2.3-58-ga151


From 085603287452fc96376ed4888bf29f8c095d2b40 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 25 Oct 2018 10:18:23 +0100
Subject: drm/i915: Compare user's 64b GTT offset even on 32b

Beware mixing unsigned long constants and 64b values, as on 32b the
constant will be zero extended and discard the high 32b when used as
a mask!

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk
(cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/gvt/gtt.h             | 1 -
 drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.h        | 2 ++
 3 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h
index 7a9b36176efb..bfb6f652b09f 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.h
+++ b/drivers/gpu/drm/i915/gvt/gtt.h
@@ -35,7 +35,6 @@
 #define _GVT_GTT_H_
 
 #define I915_GTT_PAGE_SHIFT         12
-#define I915_GTT_PAGE_MASK		(~(I915_GTT_PAGE_SIZE - 1))
 
 struct intel_vgpu_mm;
 
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 09187286d346..1aaccbe7e1de 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -460,7 +460,7 @@ eb_validate_vma(struct i915_execbuffer *eb,
 	 * any non-page-aligned or non-canonical addresses.
 	 */
 	if (unlikely(entry->flags & EXEC_OBJECT_PINNED &&
-		     entry->offset != gen8_canonical_addr(entry->offset & PAGE_MASK)))
+		     entry->offset != gen8_canonical_addr(entry->offset & I915_GTT_PAGE_MASK)))
 		return -EINVAL;
 
 	/* pad_to_size was once a reserved field, so sanitize it */
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index aa8307043036..5d2c5ba55ad8 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -49,6 +49,8 @@
 #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K
 #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M
 
+#define I915_GTT_PAGE_MASK -I915_GTT_PAGE_SIZE
+
 #define I915_GTT_MIN_ALIGNMENT I915_GTT_PAGE_SIZE
 
 #define I915_FENCE_REG_NONE -1
-- 
cgit v1.2.3-58-ga151


From 2c2f6e30d5f29691e3563d334ce208d3a1907f49 Mon Sep 17 00:00:00 2001
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Date: Thu, 25 Oct 2018 17:56:36 -0700
Subject: drm/i915/glk: Remove 99% limitation.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

While checking the opportunity to add a display_gen
check to allow glk and cnl to be on same bucket I noticed
these FIXME cases here.

So I got the confirmation from HW architect that we actually
never needed this workaround.

"GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk."

So, this reverts commit 97f55ca5b662 ("drm/i915/glk: limit pixel
 clock to 99% of cdclk workaround")

Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround")

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com
(cherry picked from commit 42882336e62aab00278114392a16374f272a0c99)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 29075c763428..8d74276029e6 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2138,16 +2138,8 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
 static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
 				     int pixel_rate)
 {
-	if (INTEL_GEN(dev_priv) >= 10)
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
 		return DIV_ROUND_UP(pixel_rate, 2);
-	else if (IS_GEMINILAKE(dev_priv))
-		/*
-		 * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk
-		 * as a temporary workaround. Use a higher cdclk instead. (Note that
-		 * intel_compute_max_dotclk() limits the max pixel clock to 99% of max
-		 * cdclk.)
-		 */
-		return DIV_ROUND_UP(pixel_rate * 100, 2 * 99);
 	else if (IS_GEN9(dev_priv) ||
 		 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
 		return pixel_rate;
@@ -2543,14 +2535,8 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
 {
 	int max_cdclk_freq = dev_priv->max_cdclk_freq;
 
-	if (INTEL_GEN(dev_priv) >= 10)
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
 		return 2 * max_cdclk_freq;
-	else if (IS_GEMINILAKE(dev_priv))
-		/*
-		 * FIXME: Limiting to 99% as a temporary workaround. See
-		 * intel_min_cdclk() for details.
-		 */
-		return 2 * max_cdclk_freq * 99 / 100;
 	else if (IS_GEN9(dev_priv) ||
 		 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
 		return max_cdclk_freq;
-- 
cgit v1.2.3-58-ga151


From 76271ef2638ca8e4bf2884cad664a34be0d5a42b Mon Sep 17 00:00:00 2001
From: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Date: Fri, 5 Oct 2018 11:56:42 -0700
Subject: drm/i915: Fix VIDEO_DIP_CTL bit shifts

The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the
definitions are unused.

v2: Moves definitions in another patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit 09209662618f9fdc38b8d4da39040c8829fd2d57)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7c491ea3d052..f2d92aee721b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4593,12 +4593,12 @@ enum {
 
 #define  DRM_DIP_ENABLE			(1 << 28)
 #define  PSR_VSC_BIT_7_SET		(1 << 27)
-#define  VSC_SELECT_MASK		(0x3 << 26)
-#define  VSC_SELECT_SHIFT		26
-#define  VSC_DIP_HW_HEA_DATA		(0 << 26)
-#define  VSC_DIP_HW_HEA_SW_DATA		(1 << 26)
-#define  VSC_DIP_HW_DATA_SW_HEA		(2 << 26)
-#define  VSC_DIP_SW_HEA_DATA		(3 << 26)
+#define  VSC_SELECT_MASK		(0x3 << 25)
+#define  VSC_SELECT_SHIFT		25
+#define  VSC_DIP_HW_HEA_DATA		(0 << 25)
+#define  VSC_DIP_HW_HEA_SW_DATA		(1 << 25)
+#define  VSC_DIP_HW_DATA_SW_HEA		(2 << 25)
+#define  VSC_DIP_SW_HEA_DATA		(3 << 25)
 #define  VDIP_ENABLE_PPS		(1 << 24)
 
 /* Panel power sequencing */
-- 
cgit v1.2.3-58-ga151


From f42f343887016330b321dd40eebc68c7292e4f1b Mon Sep 17 00:00:00 2001
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon, 29 Oct 2018 16:00:31 +0200
Subject: drm/i915: Fix error handling for the NV12 fb dimensions check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9741cc419e1b..b8dfdbc9ca1f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14646,7 +14646,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	     fb->height < SKL_MIN_YUV_420_SRC_H ||
 	     (fb->width % 4) != 0 || (fb->height % 4) != 0)) {
 		DRM_DEBUG_KMS("src dimensions not correct for NV12\n");
-		return -EINVAL;
+		goto err;
 	}
 
 	for (i = 0; i < fb->format->num_planes; i++) {
-- 
cgit v1.2.3-58-ga151


From e528c2affcf216b3d02b22004895cb678769629b Mon Sep 17 00:00:00 2001
From: Manasi Navare <manasi.d.navare@intel.com>
Date: Tue, 23 Oct 2018 12:12:47 -0700
Subject: drm/i915/icl: Fix the macros for DFLEXDPMLE register bits
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.

Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
(cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f2d92aee721b..e31c27e45734 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2095,8 +2095,12 @@ enum i915_power_well_id {
 
 /* ICL PHY DFLEX registers */
 #define PORT_TX_DFLEXDPMLE1		_MMIO(0x1638C0)
-#define   DFLEXDPMLE1_DPMLETC_MASK(n)	(0xf << (4 * (n)))
-#define   DFLEXDPMLE1_DPMLETC(n, x)	((x) << (4 * (n)))
+#define   DFLEXDPMLE1_DPMLETC_MASK(tc_port)	(0xf << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML0(tc_port)	(1 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML1_0(tc_port)	(3 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3(tc_port)	(8 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_2(tc_port)	(12 << (4 * (tc_port)))
+#define   DFLEXDPMLE1_DPMLETC_ML3_0(tc_port)	(15 << (4 * (tc_port)))
 
 /* BXT PHY Ref registers */
 #define _PORT_REF_DW3_A			0x16218C
-- 
cgit v1.2.3-58-ga151


From 0014868b9c3c1dda1de6711cf58c3486fb422d07 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri, 2 Nov 2018 16:12:09 +0000
Subject: drm/i915: Mark pin flags as u64

Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
(cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_gem_gtt.h | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index 5d2c5ba55ad8..28039290655c 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -661,20 +661,20 @@ int i915_gem_gtt_insert(struct i915_address_space *vm,
 			u64 start, u64 end, unsigned int flags);
 
 /* Flags used by pin/bind&friends. */
-#define PIN_NONBLOCK		BIT(0)
-#define PIN_MAPPABLE		BIT(1)
-#define PIN_ZONE_4G		BIT(2)
-#define PIN_NONFAULT		BIT(3)
-#define PIN_NOEVICT		BIT(4)
-
-#define PIN_MBZ			BIT(5) /* I915_VMA_PIN_OVERFLOW */
-#define PIN_GLOBAL		BIT(6) /* I915_VMA_GLOBAL_BIND */
-#define PIN_USER		BIT(7) /* I915_VMA_LOCAL_BIND */
-#define PIN_UPDATE		BIT(8)
-
-#define PIN_HIGH		BIT(9)
-#define PIN_OFFSET_BIAS		BIT(10)
-#define PIN_OFFSET_FIXED	BIT(11)
+#define PIN_NONBLOCK		BIT_ULL(0)
+#define PIN_MAPPABLE		BIT_ULL(1)
+#define PIN_ZONE_4G		BIT_ULL(2)
+#define PIN_NONFAULT		BIT_ULL(3)
+#define PIN_NOEVICT		BIT_ULL(4)
+
+#define PIN_MBZ			BIT_ULL(5) /* I915_VMA_PIN_OVERFLOW */
+#define PIN_GLOBAL		BIT_ULL(6) /* I915_VMA_GLOBAL_BIND */
+#define PIN_USER		BIT_ULL(7) /* I915_VMA_LOCAL_BIND */
+#define PIN_UPDATE		BIT_ULL(8)
+
+#define PIN_HIGH		BIT_ULL(9)
+#define PIN_OFFSET_BIAS		BIT_ULL(10)
+#define PIN_OFFSET_FIXED	BIT_ULL(11)
 #define PIN_OFFSET_MASK		(-I915_GTT_PAGE_SIZE)
 
 #endif
-- 
cgit v1.2.3-58-ga151


From 6a8915d0f8cf323e1beb792a33095cf652db4056 Mon Sep 17 00:00:00 2001
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon, 5 Nov 2018 21:46:04 +0200
Subject: drm/i915: Don't oops during modeset shutdown after lpe audio deinit
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_lpe_audio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
index cdf19553ffac..5d5336fbe7b0 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -297,8 +297,10 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
 	lpe_audio_platdev_destroy(dev_priv);
 
 	irq_free_desc(dev_priv->lpe_audio.irq);
-}
 
+	dev_priv->lpe_audio.irq = -1;
+	dev_priv->lpe_audio.platdev = NULL;
+}
 
 /**
  * intel_lpe_audio_notify() - notify lpe audio event
-- 
cgit v1.2.3-58-ga151


From 7f4cedd882f7cae83177066c2b239ef457ce4a42 Mon Sep 17 00:00:00 2001
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
Date: Fri, 5 Oct 2018 23:59:50 +0200
Subject: drm/sun4i: tcon: fix check of tcon->panel null pointer

Since tcon->panel is a pointer returned by of_drm_find_panel() need to
check if it is not NULL, hence a valid pointer.
IS_ERR() instead checks return error values, not NULL pointers.

Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)".

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com
---
 drivers/gpu/drm/sun4i/sun4i_lvds.c | 4 ++--
 drivers/gpu/drm/sun4i/sun4i_rgb.c  | 4 ++--
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c
index af7dcb6da351..e7eb0d1e17be 100644
--- a/drivers/gpu/drm/sun4i/sun4i_lvds.c
+++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c
@@ -75,7 +75,7 @@ static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Enabling LVDS output\n");
 
-	if (!IS_ERR(tcon->panel)) {
+	if (tcon->panel) {
 		drm_panel_prepare(tcon->panel);
 		drm_panel_enable(tcon->panel);
 	}
@@ -88,7 +88,7 @@ static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Disabling LVDS output\n");
 
-	if (!IS_ERR(tcon->panel)) {
+	if (tcon->panel) {
 		drm_panel_disable(tcon->panel);
 		drm_panel_unprepare(tcon->panel);
 	}
diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
index bf068da6b12e..f4a22689eb54 100644
--- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
+++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
@@ -135,7 +135,7 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Enabling RGB output\n");
 
-	if (!IS_ERR(tcon->panel)) {
+	if (tcon->panel) {
 		drm_panel_prepare(tcon->panel);
 		drm_panel_enable(tcon->panel);
 	}
@@ -148,7 +148,7 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Disabling RGB output\n");
 
-	if (!IS_ERR(tcon->panel)) {
+	if (tcon->panel) {
 		drm_panel_disable(tcon->panel);
 		drm_panel_unprepare(tcon->panel);
 	}
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index c78cd35a1294..e4b3bd0307ef 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -555,7 +555,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	 * Following code is a way to avoid quirks all around TCON
 	 * and DOTCLOCK drivers.
 	 */
-	if (!IS_ERR(tcon->panel)) {
+	if (tcon->panel) {
 		struct drm_panel *panel = tcon->panel;
 		struct drm_connector *connector = panel->connector;
 		struct drm_display_info display_info = connector->display_info;
-- 
cgit v1.2.3-58-ga151


From a8939766c75c06b5a0ab691ecbba9347e4e520cf Mon Sep 17 00:00:00 2001
From: Giulio Benetti <giulio.benetti@micronovasrl.com>
Date: Fri, 5 Oct 2018 23:59:51 +0200
Subject: drm/sun4i: tcon: prevent tcon->panel dereference if NULL

If tcon->panel pointer is NULL, trying to dereference from it
(i.e. tcon->panel->connector) will cause a null pointer dereference.

Add tcon->panel null pointer check before calling
sun4i_tcon0_mode_set_dithering().

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for
                      RGB565/RGB666 LCD panels")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index e4b3bd0307ef..f949287d926c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -491,7 +491,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
 	/* Set dithering if needed */
-	sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+	if (tcon->panel)
+		sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
 
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
-- 
cgit v1.2.3-58-ga151


From df5e31c204b34e8d9e5ec33f5b28e960c4f25e14 Mon Sep 17 00:00:00 2001
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu, 25 Oct 2018 16:05:36 +0300
Subject: drm/i915: Fix ilk+ watermarks when disabling pipes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).

This seems to have been broken by commit b6b178a77210 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.

Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.

Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b8dfdbc9ca1f..23d8008a93bb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12768,17 +12768,12 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 			intel_check_cpu_fifo_underruns(dev_priv);
 			intel_check_pch_fifo_underruns(dev_priv);
 
-			if (!new_crtc_state->active) {
-				/*
-				 * Make sure we don't call initial_watermarks
-				 * for ILK-style watermark updates.
-				 *
-				 * No clue what this is supposed to achieve.
-				 */
-				if (INTEL_GEN(dev_priv) >= 9)
-					dev_priv->display.initial_watermarks(intel_state,
-									     to_intel_crtc_state(new_crtc_state));
-			}
+			/* FIXME unify this for all platforms */
+			if (!new_crtc_state->active &&
+			    !HAS_GMCH_DISPLAY(dev_priv) &&
+			    dev_priv->display.initial_watermarks)
+				dev_priv->display.initial_watermarks(intel_state,
+								     to_intel_crtc_state(new_crtc_state));
 		}
 	}
 
-- 
cgit v1.2.3-58-ga151


From 86a484bda787d542d4a968bd7742bcf844c8adb2 Mon Sep 17 00:00:00 2001
From: Leo Li <sunpeng.li@amd.com>
Date: Tue, 30 Oct 2018 15:09:08 -0400
Subject: drm/amd: Update atom_smu_info_v3_3 structure

Mainly adding the WAFL spread spectrum info, for adjusting display
clocks when XGMI is enabled.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/include/atomfirmware.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index d2e7c0fa96c2..8eb0bb241210 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -1325,7 +1325,7 @@ struct atom_smu_info_v3_3 {
   struct   atom_common_table_header  table_header;
   uint8_t  smuip_min_ver;
   uint8_t  smuip_max_ver;
-  uint8_t  smu_rsd1;
+  uint8_t  waflclk_ss_mode;
   uint8_t  gpuclk_ss_mode;
   uint16_t sclk_ss_percentage;
   uint16_t sclk_ss_rate_10hz;
@@ -1355,7 +1355,10 @@ struct atom_smu_info_v3_3 {
   uint32_t syspll3_1_vco_freq_10khz;
   uint32_t bootup_fclk_10khz;
   uint32_t bootup_waflclk_10khz;
-  uint32_t reserved[3];
+  uint32_t smu_info_caps;
+  uint16_t waflclk_ss_percentage;    // in unit of 0.001%
+  uint16_t smuinitoffset;
+  uint32_t reserved;
 };
 
 /*
-- 
cgit v1.2.3-58-ga151


From 63088da9472854408ae5d7c47bd011daf9e1a81b Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 6 Nov 2018 16:06:32 -0500
Subject: Revert "drm/amd/display: set backlight level limit to 1"

This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f.

This breaks some apps that assume 0 is minimum brightness.

Revert for 4.20.  This is fixed properly for drm-next/4.21 in:
"drm/amd: Don't fail on backlight = 0"
However, that patch depends on more extensive changes to the
backlight interface which are too invasive for -fixes.

Fixes: Bugzilla: https://bugs.freedesktop.org/108668
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b0df6dc9a775..e224f23e2215 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1524,13 +1524,6 @@ static int amdgpu_dm_backlight_update_status(struct backlight_device *bd)
 {
 	struct amdgpu_display_manager *dm = bl_get_data(bd);
 
-	/*
-	 * PWM interperts 0 as 100% rather than 0% because of HW
-	 * limitation for level 0.So limiting minimum brightness level
-	 * to 1.
-	 */
-	if (bd->props.brightness < 1)
-		return 1;
 	if (dc_link_set_backlight_level(dm->backlight_link,
 			bd->props.brightness, 0, 0))
 		return 0;
-- 
cgit v1.2.3-58-ga151


From 8ed4ec32d5b1f04a641978322a38a8d7089553bb Mon Sep 17 00:00:00 2001
From: Shaokun Zhang <zhangshaokun@hisilicon.com>
Date: Mon, 5 Nov 2018 18:33:35 +0800
Subject: drm/amd/display: Fix misleading buffer information

RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.")
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fb04a4ad141f..5da2186b3615 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting(
 		i2c_success = i2c_write(pipe_ctx, slave_address,
 				buffer, sizeof(buffer));
 		RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
-			offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
 			/* Write failure */
@@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting(
 		i2c_success = i2c_write(pipe_ctx, slave_address,
 				buffer, sizeof(buffer));
 		RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
-			offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
 			/* Write failure */
-- 
cgit v1.2.3-58-ga151


From 02680efbb10be0d2c867fe722ae23d588f6bebef Mon Sep 17 00:00:00 2001
From: Harry Wentland <harry.wentland@amd.com>
Date: Sun, 7 Oct 2018 10:01:23 -0400
Subject: drm/amd/display: Stop leaking planes

[Why]
drm_plane_cleanup does not free the plane.

[How]
Call drm_primary_helper_destroy which will also free the plane.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index e224f23e2215..289ddd52cac4 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3301,7 +3301,7 @@ void dm_drm_plane_destroy_state(struct drm_plane *plane,
 static const struct drm_plane_funcs dm_plane_funcs = {
 	.update_plane	= drm_atomic_helper_update_plane,
 	.disable_plane	= drm_atomic_helper_disable_plane,
-	.destroy	= drm_plane_cleanup,
+	.destroy	= drm_primary_helper_destroy,
 	.reset = dm_drm_plane_reset,
 	.atomic_duplicate_state = dm_drm_plane_duplicate_state,
 	.atomic_destroy_state = dm_drm_plane_destroy_state,
-- 
cgit v1.2.3-58-ga151


From 3426d66d3e74ab0ab264a85e0795a17e3dde1e71 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 6 Nov 2018 11:19:00 -0500
Subject: drm/amdgpu/vega20: add CLK base offset

In case we need to access CLK registers.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
index 2d4473557b0d..d13fc4fcb517 100644
--- a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
+++ b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c
@@ -49,6 +49,7 @@ int vega20_reg_base_init(struct amdgpu_device *adev)
 		adev->reg_offset[SMUIO_HWIP][i] = (uint32_t *)(&(SMUIO_BASE.instance[i]));
 		adev->reg_offset[NBIF_HWIP][i] = (uint32_t *)(&(NBIO_BASE.instance[i]));
 		adev->reg_offset[THM_HWIP][i] = (uint32_t *)(&(THM_BASE.instance[i]));
+		adev->reg_offset[CLK_HWIP][i] = (uint32_t *)(&(CLK_BASE.instance[i]));
 	}
 	return 0;
 }
-- 
cgit v1.2.3-58-ga151


From 689e7b34234e29e5168894b27b752a4e16ef08c4 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 2 Nov 2018 10:51:50 -0500
Subject: drm/amdgpu/display: check if fbc is available in
 set_static_screen_control (v2)

The value is dependent on whether fbc is available.

v2: only check if num_pipes is valid

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index b75ede5f84f7..b459867a05b2 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1736,7 +1736,12 @@ static void set_static_screen_control(struct pipe_ctx **pipe_ctx,
 	if (events->force_trigger)
 		value |= 0x1;
 
-	value |= 0x84;
+	if (num_pipes) {
+		struct dc *dc = pipe_ctx[0]->stream->ctx->dc;
+
+		if (dc->fbc_compressor)
+			value |= 0x84;
+	}
 
 	for (i = 0; i < num_pipes; i++)
 		pipe_ctx[i]->stream_res.tg->funcs->
-- 
cgit v1.2.3-58-ga151


From 7875a22625aa7f11befba84bd1e669201032947d Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 6 Nov 2018 14:44:29 -0500
Subject: drm/amdgpu: add DC feature mask module parameter

Similar to ppfeaturemask.  Allows you to selectively enable/disable
DC features.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h      |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c  | 11 +++++++++++
 drivers/gpu/drm/amd/include/amd_shared.h |  4 ++++
 3 files changed, 16 insertions(+)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index d0102cfc8efb..104b2e0d893b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -151,6 +151,7 @@ extern int amdgpu_compute_multipipe;
 extern int amdgpu_gpu_recovery;
 extern int amdgpu_emu_mode;
 extern uint amdgpu_smu_memory_pool_size;
+extern uint amdgpu_dc_feature_mask;
 extern struct amdgpu_mgpu_info mgpu_info;
 
 #ifdef CONFIG_DRM_AMDGPU_SI
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 943dbf3c5da1..8de55f7f1a3a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -127,6 +127,9 @@ int amdgpu_compute_multipipe = -1;
 int amdgpu_gpu_recovery = -1; /* auto */
 int amdgpu_emu_mode = 0;
 uint amdgpu_smu_memory_pool_size = 0;
+/* FBC (bit 0) disabled by default*/
+uint amdgpu_dc_feature_mask = 0;
+
 struct amdgpu_mgpu_info mgpu_info = {
 	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
 };
@@ -631,6 +634,14 @@ module_param(halt_if_hws_hang, int, 0644);
 MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)");
 #endif
 
+/**
+ * DOC: dcfeaturemask (uint)
+ * Override display features enabled. See enum DC_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h.
+ * The default is the current set of stable display features.
+ */
+MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))");
+module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444);
+
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI
 	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h
index 2083c308007c..470d7b89071a 100644
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -133,6 +133,10 @@ enum PP_FEATURE_MASK {
 	PP_AVFS_MASK = 0x40000,
 };
 
+enum DC_FEATURE_MASK {
+	DC_FBC_MASK = 0x1,
+};
+
 /**
  * struct amd_ip_funcs - general hooks for managing amdgpu IP Blocks
  */
-- 
cgit v1.2.3-58-ga151


From ce2127c462d9d1c0832f088b23158420e87e71a0 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 6 Nov 2018 15:10:37 -0500
Subject: drm/amdgpu/display/dc: add FBC to dc_config

Add FBC to the list of features that can be enabled from the DM.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dc.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 199527171100..b57fa61b3034 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -169,6 +169,7 @@ struct link_training_settings;
 struct dc_config {
 	bool gpu_vm_support;
 	bool disable_disp_pll_sharing;
+	bool fbc_support;
 };
 
 enum visual_confirm {
-- 
cgit v1.2.3-58-ga151


From 04b94af4e348acc52546b9b19c933575f26589a1 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 6 Nov 2018 15:19:49 -0500
Subject: drm/amdgpu/display/dm: handle FBC dc feature parameter

Set the dc_config properly when the option is enabled.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 289ddd52cac4..d3f5cb1795bf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -429,6 +429,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 	    adev->asic_type < CHIP_RAVEN)
 		init_data.flags.gpu_vm_support = true;
 
+	if (amdgpu_dc_feature_mask & DC_FBC_MASK)
+		init_data.flags.fbc_support = true;
+
 	/* Display Core create. */
 	adev->dm.dc = dc_create(&init_data);
 
-- 
cgit v1.2.3-58-ga151


From 5822e9539dc11721b53d74accd4c091b982011d0 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 2 Nov 2018 10:54:27 -0500
Subject: drm/amdgpu/display/dce11: only enable FBC when selected

Causes a black screen on a Stoney laptop.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
index e3624ca24574..7c9fd9052ee2 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c
@@ -1362,7 +1362,8 @@ static bool construct(
 		pool->base.sw_i2cs[i] = NULL;
 	}
 
-	dc->fbc_compressor = dce110_compressor_create(ctx);
+	if (dc->config.fbc_support)
+		dc->fbc_compressor = dce110_compressor_create(ctx);
 
 	if (!underlay_create(ctx, &pool->base))
 		goto res_create_fail;
-- 
cgit v1.2.3-58-ga151


From 3c7eda0b65ad279dd2f26908d2f4bd088da93996 Mon Sep 17 00:00:00 2001
From: Evan Quan <evan.quan@amd.com>
Date: Wed, 24 Oct 2018 12:11:35 +0800
Subject: drm/amd/powerplay: set a default fclk/gfxclk ratio

Otherwise big gap between these two clocks may causes
some hangs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 16 ++++++++++++++++
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h |  1 +
 drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h   |  3 ++-
 3 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 57143d51e3ee..8bf76108cf39 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -120,6 +120,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr)
 	data->registry_data.disable_auto_wattman = 1;
 	data->registry_data.auto_wattman_debug = 0;
 	data->registry_data.auto_wattman_sample_period = 100;
+	data->registry_data.fclk_gfxclk_ratio = 0x3F6CCCCD;
 	data->registry_data.auto_wattman_threshold = 50;
 	data->registry_data.gfxoff_controlled_by_driver = 1;
 	data->gfxoff_allowed = false;
@@ -829,6 +830,16 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr)
 	return 0;
 }
 
+static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr)
+{
+	struct vega20_hwmgr *data =
+			(struct vega20_hwmgr *)(hwmgr->backend);
+
+	return smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_SetFclkGfxClkRatio,
+			data->registry_data.fclk_gfxclk_ratio);
+}
+
 static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 {
 	struct vega20_hwmgr *data =
@@ -1532,6 +1543,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 			"[EnableDPMTasks] Failed to enable all smu features!",
 			return result);
 
+	result = vega20_send_clock_ratio(hwmgr);
+	PP_ASSERT_WITH_CODE(!result,
+			"[EnableDPMTasks] Failed to send clock ratio!",
+			return result);
+
 	/* Initialize UVD/VCE powergating state */
 	vega20_init_powergate_state(hwmgr);
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
index 56fe6a0d42e8..25faaa5c5b10 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
@@ -328,6 +328,7 @@ struct vega20_registry_data {
 	uint8_t   disable_auto_wattman;
 	uint32_t  auto_wattman_debug;
 	uint32_t  auto_wattman_sample_period;
+	uint32_t  fclk_gfxclk_ratio;
 	uint8_t   auto_wattman_threshold;
 	uint8_t   log_avfs_param;
 	uint8_t   enable_enginess;
diff --git a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
index 45d64a81e945..4f63a736ea0e 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h
@@ -105,7 +105,8 @@
 #define PPSMC_MSG_SetSystemVirtualDramAddrHigh   0x4B
 #define PPSMC_MSG_SetSystemVirtualDramAddrLow    0x4C
 #define PPSMC_MSG_WaflTest                       0x4D
-// Unused ID 0x4E to 0x50
+#define PPSMC_MSG_SetFclkGfxClkRatio             0x4E
+// Unused ID 0x4F to 0x50
 #define PPSMC_MSG_AllowGfxOff                    0x51
 #define PPSMC_MSG_DisallowGfxOff                 0x52
 #define PPSMC_MSG_GetPptLimit                    0x53
-- 
cgit v1.2.3-58-ga151


From 108110a3ffa3483d743f3bff93917ba64dc8edd0 Mon Sep 17 00:00:00 2001
From: Evan Quan <evan.quan@amd.com>
Date: Wed, 7 Nov 2018 09:16:07 +0800
Subject: drm/amd/powerplay: always use fast UCLK switching when UCLK DPM
 enabled

With UCLK DPM enabled, slow switching is not supported any more.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 37 ++++++++++------------
 1 file changed, 17 insertions(+), 20 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 8bf76108cf39..99861f32b1f9 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -830,6 +830,18 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr)
 	return 0;
 }
 
+static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr)
+{
+	struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend);
+
+	if (data->smu_features[GNLD_DPM_UCLK].enabled)
+		return smum_send_msg_to_smc_with_parameter(hwmgr,
+			PPSMC_MSG_SetUclkFastSwitch,
+			1);
+
+	return 0;
+}
+
 static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr)
 {
 	struct vega20_hwmgr *data =
@@ -1543,6 +1555,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 			"[EnableDPMTasks] Failed to enable all smu features!",
 			return result);
 
+	result = vega20_notify_smc_display_change(hwmgr);
+	PP_ASSERT_WITH_CODE(!result,
+			"[EnableDPMTasks] Failed to notify smc display change!",
+			return result);
+
 	result = vega20_send_clock_ratio(hwmgr);
 	PP_ASSERT_WITH_CODE(!result,
 			"[EnableDPMTasks] Failed to send clock ratio!",
@@ -1988,19 +2005,6 @@ static int vega20_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 	return ret;
 }
 
-static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr,
-		bool has_disp)
-{
-	struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend);
-
-	if (data->smu_features[GNLD_DPM_UCLK].enabled)
-		return smum_send_msg_to_smc_with_parameter(hwmgr,
-			PPSMC_MSG_SetUclkFastSwitch,
-			has_disp ? 1 : 0);
-
-	return 0;
-}
-
 int vega20_display_clock_voltage_request(struct pp_hwmgr *hwmgr,
 		struct pp_display_clock_request *clock_req)
 {
@@ -2060,13 +2064,6 @@ static int vega20_notify_smc_display_config_after_ps_adjustment(
 	struct pp_display_clock_request clock_req;
 	int ret = 0;
 
-	if ((hwmgr->display_config->num_display > 1) &&
-	     !hwmgr->display_config->multi_monitor_in_sync &&
-	     !hwmgr->display_config->nb_pstate_switch_disable)
-		vega20_notify_smc_display_change(hwmgr, false);
-	else
-		vega20_notify_smc_display_change(hwmgr, true);
-
 	min_clocks.dcefClock = hwmgr->display_config->min_dcef_set_clk;
 	min_clocks.dcefClockInSR = hwmgr->display_config->min_dcef_deep_sleep_set_clk;
 	min_clocks.memoryClock = hwmgr->display_config->min_mem_set_clock;
-- 
cgit v1.2.3-58-ga151


From 8be17ac95f8451b51f636622d8d4b8674334f468 Mon Sep 17 00:00:00 2001
From: "Jerry (Fangzhi) Zuo" <Jerry.Zuo@amd.com>
Date: Tue, 30 Oct 2018 14:28:49 -0400
Subject: drm/amd/display: Cleanup MST non-atomic code workaround

[why]
It is not correct to touch aconnector within atomic_check.

[How]
It was added as workaround before, and no longer needed.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 15 +++-------
 .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c    | 34 ----------------------
 .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.h    |  1 -
 3 files changed, 4 insertions(+), 46 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index d3f5cb1795bf..c1262f62cd9f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2703,18 +2703,11 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 	drm_connector = &aconnector->base;
 
 	if (!aconnector->dc_sink) {
-		/*
-		 * Create dc_sink when necessary to MST
-		 * Don't apply fake_sink to MST
-		 */
-		if (aconnector->mst_port) {
-			dm_dp_mst_dc_sink_create(drm_connector);
-			return stream;
+		if (!aconnector->mst_port) {
+			sink = create_fake_sink(aconnector);
+			if (!sink)
+				return stream;
 		}
-
-		sink = create_fake_sink(aconnector);
-		if (!sink)
-			return stream;
 	} else {
 		sink = aconnector->dc_sink;
 	}
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 03601d717fed..03e98967d6c2 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -205,40 +205,6 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = {
 	.atomic_get_property = amdgpu_dm_connector_atomic_get_property
 };
 
-void dm_dp_mst_dc_sink_create(struct drm_connector *connector)
-{
-	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
-	struct dc_sink *dc_sink;
-	struct dc_sink_init_data init_params = {
-			.link = aconnector->dc_link,
-			.sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST };
-
-	/* FIXME none of this is safe. we shouldn't touch aconnector here in
-	 * atomic_check
-	 */
-
-	/*
-	 * TODO: Need to further figure out why ddc.algo is NULL while MST port exists
-	 */
-	if (!aconnector->port || !aconnector->port->aux.ddc.algo)
-		return;
-
-	ASSERT(aconnector->edid);
-
-	dc_sink = dc_link_add_remote_sink(
-		aconnector->dc_link,
-		(uint8_t *)aconnector->edid,
-		(aconnector->edid->extensions + 1) * EDID_LENGTH,
-		&init_params);
-
-	dc_sink->priv = aconnector;
-	aconnector->dc_sink = dc_sink;
-
-	if (aconnector->dc_sink)
-		amdgpu_dm_update_freesync_caps(
-				connector, aconnector->edid);
-}
-
 static int dm_dp_mst_get_modes(struct drm_connector *connector)
 {
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
index 8cf51da26657..2da851b40042 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h
@@ -31,6 +31,5 @@ struct amdgpu_dm_connector;
 
 void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
 				       struct amdgpu_dm_connector *aconnector);
-void dm_dp_mst_dc_sink_create(struct drm_connector *connector);
 
 #endif
-- 
cgit v1.2.3-58-ga151


From 0e6613e46fed29316f33acf86e1d1568288638b5 Mon Sep 17 00:00:00 2001
From: "Jerry (Fangzhi) Zuo" <Jerry.Zuo@amd.com>
Date: Tue, 30 Oct 2018 14:37:16 -0400
Subject: drm/amd/display: Drop reusing drm connector for MST

[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.

[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h  |  2 --
 .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c    | 40 ++++------------------
 2 files changed, 7 insertions(+), 35 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 978b34a5011c..924a38a1fc44 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -160,8 +160,6 @@ struct amdgpu_dm_connector {
 	struct mutex hpd_lock;
 
 	bool fake_enable;
-
-	bool mst_connected;
 };
 
 #define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 03e98967d6c2..31126eb23a74 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -320,25 +320,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_dm_connector *aconnector;
 	struct drm_connector *connector;
-	struct drm_connector_list_iter conn_iter;
-
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		aconnector = to_amdgpu_dm_connector(connector);
-		if (aconnector->mst_port == master
-				&& !aconnector->port) {
-			DRM_INFO("DM_MST: reusing connector: %p [id: %d] [master: %p]\n",
-						aconnector, connector->base.id, aconnector->mst_port);
-
-			aconnector->port = port;
-			drm_connector_set_path_property(connector, pathprop);
-
-			drm_connector_list_iter_end(&conn_iter);
-			aconnector->mst_connected = true;
-			return &aconnector->base;
-		}
-	}
-	drm_connector_list_iter_end(&conn_iter);
 
 	aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL);
 	if (!aconnector)
@@ -387,8 +368,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 	 */
 	amdgpu_dm_connector_funcs_reset(connector);
 
-	aconnector->mst_connected = true;
-
 	DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n",
 			aconnector, connector->base.id, aconnector->mst_port);
 
@@ -400,6 +379,9 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 					struct drm_connector *connector)
 {
+	struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr);
+	struct drm_device *dev = master->base.dev;
+	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
 
 	DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n",
@@ -413,7 +395,10 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 		aconnector->dc_sink = NULL;
 	}
 
-	aconnector->mst_connected = false;
+	drm_connector_unregister(connector);
+	if (adev->mode_info.rfbdev)
+		drm_fb_helper_remove_one_connector(&adev->mode_info.rfbdev->helper, connector);
+	drm_connector_put(connector);
 }
 
 static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
@@ -424,18 +409,10 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
 	drm_kms_helper_hotplug_event(dev);
 }
 
-static void dm_dp_mst_link_status_reset(struct drm_connector *connector)
-{
-	mutex_lock(&connector->dev->mode_config.mutex);
-	drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD);
-	mutex_unlock(&connector->dev->mode_config.mutex);
-}
-
 static void dm_dp_mst_register_connector(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct amdgpu_device *adev = dev->dev_private;
-	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
 
 	if (adev->mode_info.rfbdev)
 		drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector);
@@ -443,9 +420,6 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector)
 		DRM_ERROR("adev->mode_info.rfbdev is NULL\n");
 
 	drm_connector_register(connector);
-
-	if (aconnector->mst_connected)
-		dm_dp_mst_link_status_reset(connector);
 }
 
 static const struct drm_dp_mst_topology_cbs dm_mst_cbs = {
-- 
cgit v1.2.3-58-ga151


From 63237f8748bdf46dccf79ef8f98f05e9fe799162 Mon Sep 17 00:00:00 2001
From: Lyude Paul <lyude@redhat.com>
Date: Thu, 1 Nov 2018 21:51:49 -0400
Subject: drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()

[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:

[  160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  160.697234] PGD 0 P4D 0
[  160.697814] Oops: 0010 [#1] SMP PTI
[  160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G           O      4.19.0Lyude-Test+ #2
[  160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[  160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[  160.700322] RIP: 0010:          (null)
[  160.700920] Code: Bad RIP value.
[  160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[  160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[  160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[  160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[  160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[  160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[  160.705260] FS:  0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[  160.705854] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[  160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  160.708372] Call Trace:
[  160.708998]  ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[  160.709625]  ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[  160.710284]  ? wake_up_q+0x54/0x70
[  160.710877]  ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[  160.711512]  ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[  160.712161]  ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[  160.712762]  ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[  160.713408]  ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[  160.714013]  ? process_one_work+0x1a1/0x3a0
[  160.714667]  ? worker_thread+0x30/0x380
[  160.715326]  ? wq_update_unbound_numa+0x10/0x10
[  160.715939]  ? kthread+0x112/0x130
[  160.716591]  ? kthread_create_worker_on_cpu+0x70/0x70
[  160.717262]  ? ret_from_fork+0x35/0x40
[  160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[  160.720141] CR2: 0000000000000000

Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.

[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/gpu')

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 31126eb23a74..d02c32a1039c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -285,12 +285,7 @@ dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector)
 	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_encoder *amdgpu_encoder;
 	struct drm_encoder *encoder;
-	const struct drm_connector_helper_funcs *connector_funcs =
-		connector->base.helper_private;
-	struct drm_encoder *enc_master =
-		connector_funcs->best_encoder(&connector->base);
 
-	DRM_DEBUG_KMS("enc master is %p\n", enc_master);
 	amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL);
 	if (!amdgpu_encoder)
 		return NULL;
-- 
cgit v1.2.3-58-ga151