From e90ddd813df7897af34226ed1cd442f7a182816e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 2 May 2007 17:59:44 +0100 Subject: [ARM] 4348/4: iop3xx: Give Linux control over PCI initialization Currently the iop3xx platform support code assumes that RedBoot is the bootloader and has already initialized the ATU. Linux should handle this initialization for three reasons: 1/ The memory map that RedBoot sets up is not optimal (page_to_dma and virt_to_phys return different addresses). The effect of this is that using the dma mapping API for the internal bus dma units generates pci bus addresses that are incorrect for the internal bus. 2/ Not all iop platforms use RedBoot 3/ If the ATU is already initialized it indicates that the iop is an add-in card in another host, it does not own the PCI bus, and should not be re-initialized. Changelog: * rather than change nr_controllers to zero, simply do not call pci_common_init Cc: Lennert Buytenhek Signed-off-by: Dan Williams Signed-off-by: Russell King --- arch/arm/mach-iop33x/iq80332.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-iop33x/iq80332.c') diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 96d6f0f3cd21..58c81496c6f6 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -96,7 +96,8 @@ static struct hw_pci iq80332_pci __initdata = { static int __init iq80332_pci_init(void) { - if (machine_is_iq80332()) + if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) && + machine_is_iq80332()) pci_common_init(&iq80332_pci); return 0; -- cgit v1.2.3-58-ga151