From 58b278f568f0509497e2df7310bfd719156a60d1 Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Wed, 28 Aug 2019 13:57:29 +0530 Subject: powerpc: Provide initial documentation for PAPR hcalls This doc patch provides an initial description of the hcall op-codes that are used by Linux kernel running as a guest (LPAR) on top of PowerVM or any other sPAPR compliant hyper-visor (e.g qemu). Apart from documenting the hcalls the doc-patch also provides a rudimentary overview of how hcall ABI, how they are issued with the Linux kernel and how information/control flows between the guest and hypervisor. Signed-off-by: Vaibhav Jain Reviewed-by: Laurent Dufour Acked-by: Nicholas Piggin [mpe: Add SPDX tag, add it to index.rst] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190828082729.16695-1-vaibhav@linux.ibm.com --- Documentation/powerpc/index.rst | 1 + Documentation/powerpc/papr_hcalls.rst | 250 ++++++++++++++++++++++++++++++++++ 2 files changed, 251 insertions(+) create mode 100644 Documentation/powerpc/papr_hcalls.rst (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst index 2df04259db65..0d45f0fc8e57 100644 --- a/Documentation/powerpc/index.rst +++ b/Documentation/powerpc/index.rst @@ -22,6 +22,7 @@ powerpc isa-versions kaslr-booke32 mpc52xx + papr_hcalls pci_iov_resource_on_powernv pmu-ebb ptrace diff --git a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst new file mode 100644 index 000000000000..3493631a60f8 --- /dev/null +++ b/Documentation/powerpc/papr_hcalls.rst @@ -0,0 +1,250 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Hypercall Op-codes (hcalls) +=========================== + +Overview +========= + +Virtualization on 64-bit Power Book3S Platforms is based on the PAPR +specification [1]_ which describes the run-time environment for a guest +operating system and how it should interact with the hypervisor for +privileged operations. Currently there are two PAPR compliant hypervisors: + +- **IBM PowerVM (PHYP)**: IBM's proprietary hypervisor that supports AIX, + IBM-i and Linux as supported guests (termed as Logical Partitions + or LPARS). It supports the full PAPR specification. + +- **Qemu/KVM**: Supports PPC64 linux guests running on a PPC64 linux host. + Though it only implements a subset of PAPR specification called LoPAPR [2]_. + +On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called +a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must +issue hypercalls to the hypervisor whenever it needs to perform an action +that is hypervisor priviledged [3]_ or for other services managed by the +hypervisor. + +Hence a Hypercall (hcall) is essentially a request by the pseries guest +asking hypervisor to perform a privileged operation on behalf of the guest. The +guest issues a with necessary input operands. The hypervisor after performing +the privilege operation returns a status code and output operands back to the +guest. + +HCALL ABI +========= +The ABI specification for a hcall between a pseries guest and PAPR hypervisor +is covered in section 14.5.3 of ref [2]_. Switch to the Hypervisor context is +done via the instruction **HVCS** that expects the Opcode for hcall is set in *r3* +and any in-arguments for the hcall are provided in registers *r4-r12*. If values +have to be passed through a memory buffer, the data stored in that buffer should be +in Big-endian byte order. + +Once control is returns back to the guest after hypervisor has serviced the +'HVCS' instruction the return value of the hcall is available in *r3* and any +out values are returned in registers *r4-r12*. Again like in case of in-arguments, +any out values stored in a memory buffer will be in Big-endian byte order. + +Powerpc arch code provides convenient wrappers named **plpar_hcall_xxx** defined +in a arch specific header [4]_ to issue hcalls from the linux kernel +running as pseries guest. + +Register Conventions +==================== + +Any hcall should follow same register convention as described in section 2.2.1.1 +of "64-Bit ELF V2 ABI Specification: Power Architecture"[5]_. Table below +summarizes these conventions: + ++----------+----------+-------------------------------------------+ +| Register |Volatile | Purpose | +| Range |(Y/N) | | ++==========+==========+===========================================+ +| r0 | Y | Optional-usage | ++----------+----------+-------------------------------------------+ +| r1 | N | Stack Pointer | ++----------+----------+-------------------------------------------+ +| r2 | N | TOC | ++----------+----------+-------------------------------------------+ +| r3 | Y | hcall opcode/return value | ++----------+----------+-------------------------------------------+ +| r4-r10 | Y | in and out values | ++----------+----------+-------------------------------------------+ +| r11 | Y | Optional-usage/Environmental pointer | ++----------+----------+-------------------------------------------+ +| r12 | Y | Optional-usage/Function entry address at | +| | | global entry point | ++----------+----------+-------------------------------------------+ +| r13 | N | Thread-Pointer | ++----------+----------+-------------------------------------------+ +| r14-r31 | N | Local Variables | ++----------+----------+-------------------------------------------+ +| LR | Y | Link Register | ++----------+----------+-------------------------------------------+ +| CTR | Y | Loop Counter | ++----------+----------+-------------------------------------------+ +| XER | Y | Fixed-point exception register. | ++----------+----------+-------------------------------------------+ +| CR0-1 | Y | Condition register fields. | ++----------+----------+-------------------------------------------+ +| CR2-4 | N | Condition register fields. | ++----------+----------+-------------------------------------------+ +| CR5-7 | Y | Condition register fields. | ++----------+----------+-------------------------------------------+ +| Others | N | | ++----------+----------+-------------------------------------------+ + +DRC & DRC Indexes +================= +:: + + DR1 Guest + +--+ +------------+ +---------+ + | | <----> | | | User | + +--+ DRC1 | | DRC | Space | + | PAPR | Index +---------+ + DR2 | Hypervisor | | | + +--+ | | <-----> | Kernel | + | | <----> | | Hcall | | + +--+ DRC2 +------------+ +---------+ + +PAPR hypervisor terms shared hardware resources like PCI devices, NVDIMMs etc +available for use by LPARs as Dynamic Resource (DR). When a DR is allocated to +an LPAR, PHYP creates a data-structure called Dynamic Resource Connector (DRC) +to manage LPAR access. An LPAR refers to a DRC via an opaque 32-bit number +called DRC-Index. The DRC-index value is provided to the LPAR via device-tree +where its present as an attribute in the device tree node associated with the +DR. + +HCALL Return-values +=================== + +After servicing the hcall, hypervisor sets the return-value in *r3* indicating +success or failure of the hcall. In case of a failure an error code indicates +the cause for error. These codes are defined and documented in arch specific +header [4]_. + +In some cases a hcall can potentially take a long time and need to be issued +multiple times in order to be completely serviced. These hcalls will usually +accept an opaque value *continue-token* within there argument list and a +return value of *H_CONTINUE* indicates that hypervisor hasn't still finished +servicing the hcall yet. + +To make such hcalls the guest need to set *continue-token == 0* for the +initial call and use the hypervisor returned value of *continue-token* +for each subsequent hcall until hypervisor returns a non *H_CONTINUE* +return value. + +HCALL Op-codes +============== + +Below is a partial list of HCALLs that are supported by PHYP. For the +corresponding opcode values please look into the arch specific header [4]_: + +**H_SCM_READ_METADATA** + +| Input: *drcIndex, offset, buffer-address, numBytesToRead* +| Out: *numBytesRead* +| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_Hardware* + +Given a DRC Index of an NVDIMM, read N-bytes from the the metadata area +associated with it, at a specified offset and copy it to provided buffer. +The metadata area stores configuration information such as label information, +bad-blocks etc. The metadata area is located out-of-band of NVDIMM storage +area hence a separate access semantics is provided. + +**H_SCM_WRITE_METADATA** + +| Input: *drcIndex, offset, data, numBytesToWrite* +| Out: *None* +| Return Value: *H_Success, H_Parameter, H_P2, H_P4, H_Hardware* + +Given a DRC Index of an NVDIMM, write N-bytes to the metadata area +associated with it, at the specified offset and from the provided buffer. + +**H_SCM_BIND_MEM** + +| Input: *drcIndex, startingScmBlockIndex, numScmBlocksToBind,* +| *targetLogicalMemoryAddress, continue-token* +| Out: *continue-token, targetLogicalMemoryAddress, numScmBlocksToBound* +| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_P4, H_Overlap,* +| *H_Too_Big, H_P5, H_Busy* + +Given a DRC-Index of an NVDIMM, map a continuous SCM blocks range +*(startingScmBlockIndex, startingScmBlockIndex+numScmBlocksToBind)* to the guest +at *targetLogicalMemoryAddress* within guest physical address space. In +case *targetLogicalMemoryAddress == 0xFFFFFFFF_FFFFFFFF* then hypervisor +assigns a target address to the guest. The HCALL can fail if the Guest has +an active PTE entry to the SCM block being bound. + +**H_SCM_UNBIND_MEM** +| Input: drcIndex, startingScmLogicalMemoryAddress, numScmBlocksToUnbind +| Out: numScmBlocksUnbound +| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Overlap,* +| *H_Busy, H_LongBusyOrder1mSec, H_LongBusyOrder10mSec* + +Given a DRC-Index of an NVDimm, unmap *numScmBlocksToUnbind* SCM blocks starting +at *startingScmLogicalMemoryAddress* from guest physical address space. The +HCALL can fail if the Guest has an active PTE entry to the SCM block being +unbound. + +**H_SCM_QUERY_BLOCK_MEM_BINDING** + +| Input: *drcIndex, scmBlockIndex* +| Out: *Guest-Physical-Address* +| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound* + +Given a DRC-Index and an SCM Block index return the guest physical address to +which the SCM block is mapped to. + +**H_SCM_QUERY_LOGICAL_MEM_BINDING** + +| Input: *Guest-Physical-Address* +| Out: *drcIndex, scmBlockIndex* +| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound* + +Given a guest physical address return which DRC Index and SCM block is mapped +to that address. + +**H_SCM_UNBIND_ALL** + +| Input: *scmTargetScope, drcIndex* +| Out: *None* +| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Busy,* +| *H_LongBusyOrder1mSec, H_LongBusyOrder10mSec* + +Depending on the Target scope unmap all SCM blocks belonging to all NVDIMMs +or all SCM blocks belonging to a single NVDIMM identified by its drcIndex +from the LPAR memory. + +**H_SCM_HEALTH** + +| Input: drcIndex +| Out: *health-bitmap, health-bit-valid-bitmap* +| Return Value: *H_Success, H_Parameter, H_Hardware* + +Given a DRC Index return the info on predictive failure and overall health of +the NVDIMM. The asserted bits in the health-bitmap indicate a single predictive +failure and health-bit-valid-bitmap indicate which bits in health-bitmap are +valid. + +**H_SCM_PERFORMANCE_STATS** + +| Input: drcIndex, resultBuffer Addr +| Out: None +| Return Value: *H_Success, H_Parameter, H_Unsupported, H_Hardware, H_Authority, H_Privilege* + +Given a DRC Index collect the performance statistics for NVDIMM and copy them +to the resultBuffer. + +References +========== +.. [1] "Power Architecture Platform Reference" + https://en.wikipedia.org/wiki/Power_Architecture_Platform_Reference +.. [2] "Linux on Power Architecture Platform Reference" + https://members.openpowerfoundation.org/document/dl/469 +.. [3] "Definitions and Notation" Book III-Section 14.5.3 + https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0 +.. [4] arch/powerpc/include/asm/hvcall.h +.. [5] "64-Bit ELF V2 ABI Specification: Power Architecture" + https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture -- cgit v1.2.3-58-ga151