From b62be8ea9db4048112219ff6d6ce5f183179d4dc Mon Sep 17 00:00:00 2001 From: Jin Dongming Date: Thu, 26 Aug 2010 17:29:05 +0900 Subject: x86, mce, therm_throt.c: Fix missing curly braces in error handling logic When the feature PTS is not supported by CPU, the sysfile package_power_limit_count for package should not be generated. This patch is used for fixing missing { and }. The patch is not complete as there are other error handling problems in this function - but that can wait until the merge window. Signed-off-by: Jin Dongming Reviewed-by: Fenghua Yu Acked-by: Jean Delvare Cc: Brown Len Cc: Guenter Roeck Cc: Hidetoshi Seto Cc: lm-sensors@lm-sensors.org LKML-Reference: <4C7625D1.4060201@np.css.fujitsu.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/therm_throt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index d9368eeda309..169d8804a9f8 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -216,7 +216,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_core_power_limit_count.attr, thermal_attr_group.name); - if (cpu_has(c, X86_FEATURE_PTS)) + if (cpu_has(c, X86_FEATURE_PTS)) { err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_package_throttle_count.attr, thermal_attr_group.name); @@ -224,6 +224,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_package_power_limit_count.attr, thermal_attr_group.name); + } return err; } -- cgit v1.2.3-58-ga151 From 6dcbfe4f0b4e17e289d56fa534b7ce5a6b7f63a3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 8 Oct 2010 12:08:34 +0200 Subject: x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order This fixes possible cases of not collecting valid error info in the MCE error thresholding groups on F10h hardware. The current code contains a subtle problem of checking only the Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM thresholding group) in its first iteration and breaking out if the bit is cleared. But (!), this MSR contains an offset value, BlkPtr[31:24], which points to the remaining MSRs in this thresholding group which might contain valid information too. But if we bail out only after we checked the valid bit in the first MSR and not the block pointer too, we miss that other information. The thing is, MC4_MISC0[BlkPtr] is not predicated on MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked prior to iterating over the MCI_MISCj thresholding group, irrespective of the MC4_MISC0[Valid] setting. Signed-off-by: Borislav Petkov Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_amd.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 5e975298fa81..39aaee5c1ab2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -141,6 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) address = (low & MASK_BLKPTR_LO) >> 21; if (!address) break; + address += MCG_XBLK_ADDR; } else ++address; @@ -148,12 +149,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) if (rdmsr_safe(address, &low, &high)) break; - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } + if (!(high & MASK_VALID_HI)) + continue; if (!(high & MASK_CNTP_HI) || (high & MASK_LOCKED_HI)) -- cgit v1.2.3-58-ga151 From 73cf624d029d776a33d0a80c695485b3f9b36231 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 10 Oct 2010 19:52:15 -0700 Subject: x86, numa: For each node, register the memory blocks actually used Russ reported SGI UV is broken recently. He said: | The SRAT table shows that memory range is spread over two nodes. | | SRAT: Node 0 PXM 0 100000000-800000000 | SRAT: Node 1 PXM 1 800000000-1000000000 | SRAT: Node 0 PXM 0 1000000000-1080000000 | |Previously, the kernel early_node_map[] would show three entries |with the proper node. | |[ 0.000000] 0: 0x00100000 -> 0x00800000 |[ 0.000000] 1: 0x00800000 -> 0x01000000 |[ 0.000000] 0: 0x01000000 -> 0x01080000 | |The problem is recent community kernel early_node_map[] shows |only two entries with the node 0 entry overlapping the node 1 |entry. | | 0: 0x00100000 -> 0x01080000 | 1: 0x00800000 -> 0x01000000 After looking at the changelog, Found out that it has been broken for a while by following commit |commit 8716273caef7f55f39fe4fc6c69c5f9f197f41f1 |Author: David Rientjes |Date: Fri Sep 25 15:20:04 2009 -0700 | | x86: Export srat physical topology Before that commit, register_active_regions() is called for every SRAT memory entry right away. Use nodememblk_range[] instead of nodes[] in order to make sure we capture the actual memory blocks registered with each node. nodes[] contains an extended range which spans all memory regions associated with a node, but that does not mean that all the memory in between are included. Reported-by: Russ Anderson Tested-by: Russ Anderson Signed-off-by: Yinghai Lu LKML-Reference: <4CB27BDF.5000800@kernel.org> Acked-by: David Rientjes Cc: 2.6.33 .34 .35 .36 Signed-off-by: H. Peter Anvin --- arch/x86/mm/srat_64.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index f9897f7a9ef1..9c0d0d399c30 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -420,9 +420,11 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } - for_each_node_mask(i, nodes_parsed) - e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, - nodes[i].end >> PAGE_SHIFT); + for (i = 0; i < num_node_memblks; i++) + e820_register_active_regions(memblk_nodeid[i], + node_memblk_range[i].start >> PAGE_SHIFT, + node_memblk_range[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ sort_node_map(); if (!nodes_cover_memory(nodes)) { -- cgit v1.2.3-58-ga151