From 48fc7f7e787dd65ffe88521bce31f4062ba273eb Mon Sep 17 00:00:00 2001 From: Adam Buchbinder Date: Wed, 19 Sep 2012 21:48:00 -0400 Subject: Fix misspellings of "whether" in comments. "Whether" is misspelled in various comments across the tree; this fixes them. No code changes. Signed-off-by: Adam Buchbinder Signed-off-by: Jiri Kosina --- arch/arm/mach-s3c24xx/include/mach/bast-map.h | 2 +- arch/arm/mach-s3c24xx/include/mach/dma.h | 2 +- arch/arm/mach-s3c24xx/include/mach/vr1000-map.h | 2 +- arch/arm/mach-s3c24xx/pm.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/m68k/math-emu/fp_log.c | 2 +- arch/powerpc/include/asm/pte-hash64-64k.h | 2 +- arch/powerpc/include/asm/smu.h | 4 ++-- arch/powerpc/kernel/legacy_serial.c | 2 +- arch/powerpc/kernel/of_platform.c | 2 +- arch/powerpc/kernel/signal_64.c | 2 +- arch/powerpc/mm/slice.c | 2 +- arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +- arch/powerpc/platforms/cell/iommu.c | 2 +- arch/powerpc/platforms/cell/spider-pic.c | 6 +++--- arch/powerpc/platforms/powermac/pic.c | 2 +- drivers/gpu/drm/radeon/evergreen.c | 2 +- drivers/gpu/drm/radeon/ni.c | 4 ++-- drivers/gpu/drm/radeon/si.c | 6 +++--- drivers/i2c/busses/i2c-nuc900.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 4 ++-- drivers/mtd/maps/plat-ram.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- drivers/net/ethernet/8390/ax88796.c | 2 +- drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h | 2 +- drivers/net/sungem_phy.c | 8 ++++---- drivers/rtc/rtc-isl1208.c | 2 +- drivers/rtc/rtc-s3c.c | 2 +- drivers/s390/block/dasd_devmap.c | 2 +- drivers/usb/storage/realtek_cr.c | 2 +- drivers/watchdog/booke_wdt.c | 2 +- fs/btrfs/extent-tree.c | 2 +- fs/btrfs/ordered-data.h | 2 +- fs/ext4/ext4.h | 2 +- fs/fhandle.c | 4 ++-- fs/jbd/transaction.c | 2 +- fs/jbd2/transaction.c | 2 +- fs/logfs/inode.c | 2 +- include/linux/lru_cache.h | 4 ++-- include/linux/vgaarb.h | 4 ++-- include/linux/watchdog.h | 2 +- include/net/sock.h | 2 +- net/can/proc.c | 2 +- sound/pci/es1968.c | 2 +- sound/usb/quirks.c | 2 +- 45 files changed, 58 insertions(+), 58 deletions(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h index 6e7dc9d0cf0e..eecea2a50f8f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/bast-map.h @@ -74,7 +74,7 @@ /* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that + * whether the access is for 8 or 16bit IO... this ensures that * the correct access is made * * 0x10000000 of space, partitioned as so: diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index ee99fd56c043..6b72d5a4b377 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -88,7 +88,7 @@ enum s3c2410_dma_state { * * This represents the state of the DMA engine, wrt to the loaded / running * transfers. Since we don't have any way of knowing exactly the state of - * the DMA transfers, we need to know the state to make decisions on wether + * the DMA transfers, we need to know the state to make decisions on whether * we can * * S3C2410_DMA_NONE diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h index 99612fcc4eb2..28376e56dd3b 100644 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h +++ b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h @@ -51,7 +51,7 @@ #define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) /* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that + * whether the access is for 8 or 16bit IO... this ensures that * the correct access is made * * 0x10000000 of space, partitioned as so: diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 60627e63a254..724755f0b0f5 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -121,7 +121,7 @@ void s3c_pm_configure_extint(void) int pin; /* for each of the external interrupts (EINT0..EINT15) we - * need to check wether it is an external interrupt source, + * need to check whether it is an external interrupt source, * and then configure it as an input if it is not */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e7021f0d..3eb5139656af 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -325,7 +325,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) chan->state = S3C2410_DMA_RUNNING; - /* check wether there is anything to load, and if not, see + /* check whether there is anything to load, and if not, see * if we can find anything to load */ diff --git a/arch/m68k/math-emu/fp_log.c b/arch/m68k/math-emu/fp_log.c index 3384a5244fbd..0663067870f2 100644 --- a/arch/m68k/math-emu/fp_log.c +++ b/arch/m68k/math-emu/fp_log.c @@ -50,7 +50,7 @@ fp_fsqrt(struct fp_ext *dest, struct fp_ext *src) * sqrt(m*2^e) = * sqrt(2*m) * 2^(p) , if e = 2*p + 1 * - * So we use the last bit of the exponent to decide wether to + * So we use the last bit of the exponent to decide whether to * use the m or 2*m. * * Since only the fractional part of the mantissa is stored and diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index eedf427c9124..3e13e23e4fdf 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -23,7 +23,7 @@ /* Note the full page bits must be in the same location as for normal * 4k pages as the same assembly will be used to insert 64K pages - * wether the kernel has CONFIG_PPC_64K_PAGES or not + * whether the kernel has CONFIG_PPC_64K_PAGES or not */ #define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ #define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h index ae20ce1af4c7..6e909f3e6a46 100644 --- a/arch/powerpc/include/asm/smu.h +++ b/arch/powerpc/include/asm/smu.h @@ -132,7 +132,7 @@ * * At this point, the OF driver seems to have a limitation on transfer * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know - * wether this is just an OF limit due to some temporary buffer size + * whether this is just an OF limit due to some temporary buffer size * or if this is an SMU imposed limit. This driver has the same limitation * for now as I use a 0x10 bytes temporary buffer as well * @@ -236,7 +236,7 @@ * 3 (optional): enable nmi? [0x00 or 0x01] * * Returns: - * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether + * If parameter 2 is 0x00 and parameter 3 is not specified, returns whether * NMI is enabled. Otherwise unknown. */ #define SMU_CMD_MISC_df_NMI_OPTION 0x04 diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index bedd12e1cfbc..0733b05eb856 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -387,7 +387,7 @@ void __init find_legacy_serial_ports(void) of_node_put(parent); continue; } - /* Check for known pciclass, and also check wether we have + /* Check for known pciclass, and also check whether we have * a device with child nodes for ports or not */ if (of_device_is_compatible(np, "pciclass,0700") || diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 2049f2d00ffe..9db8ec07ec94 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -82,7 +82,7 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev) return -ENXIO; /* Claim resources. This might need some rework as well depending - * wether we are doing probe-only or not, like assigning unassigned + * whether we are doing probe-only or not, like assigning unassigned * resources etc... */ pcibios_claim_one_bus(phb->bus); diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index d183f8719a50..1ca045d44324 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -83,7 +83,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * the context). This is very important because we must ensure we * don't lose the VRSAVE content that may have been set prior to * the process doing its first vector operation - * Userland shall check AT_HWCAP to know wether it can rely on the + * Userland shall check AT_HWCAP to know whether it can rely on the * v_regs pointer or not */ #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index 5829d2a950d4..cf9dada734b6 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -722,7 +722,7 @@ void slice_set_range_psize(struct mm_struct *mm, unsigned long start, } /* - * is_hugepage_only_range() is used by generic code to verify wether + * is_hugepage_only_range() is used by generic code to verify whether * a normal mmap mapping (non hugetlbfs) is valid on a given area. * * until the generic code provides a more generic hook and/or starts diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 028470b95886..a51cb07bd663 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -526,7 +526,7 @@ EXPORT_SYMBOL(mpc52xx_gpt_timer_period); #define WDT_IDENTITY "mpc52xx watchdog on GPT0" -/* wdt_is_active stores wether or not the /dev/watchdog device is opened */ +/* wdt_is_active stores whether or not the /dev/watchdog device is opened */ static unsigned long wdt_is_active; /* wdt-capable gpt */ diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index dca213666747..e56bb651da1a 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -728,7 +728,7 @@ static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np) nid, np->full_name); /* XXX todo: If we can have multiple windows on the same IOMMU, which - * isn't the case today, we probably want here to check wether the + * isn't the case today, we probably want here to check whether the * iommu for that node is already setup. * However, there might be issue with getting the size right so let's * ignore that for now. We might want to completely get rid of the diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index d8b7cc8a66ca..8e299447127e 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -148,7 +148,7 @@ static int spider_set_irq_type(struct irq_data *d, unsigned int type) /* Configure the source. One gross hack that was there before and * that I've kept around is the priority to the BE which I set to - * be the same as the interrupt source number. I don't know wether + * be the same as the interrupt source number. I don't know whether * that's supposed to make any kind of sense however, we'll have to * decide that, but for now, I'm not changing the behaviour. */ @@ -220,7 +220,7 @@ static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc) /* For hooking up the cascace we have a problem. Our device-tree is * crap and we don't know on which BE iic interrupt we are hooked on at * least not the "standard" way. We can reconstitute it based on two - * informations though: which BE node we are connected to and wether + * informations though: which BE node we are connected to and whether * we are connected to IOIF0 or IOIF1. Right now, we really only care * about the IBM cell blade and we know that its firmware gives us an * interrupt-map property which is pretty strange. @@ -232,7 +232,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) int imaplen, intsize, unit; struct device_node *iic; - /* First, we check wether we have a real "interrupts" in the device + /* First, we check whether we have a real "interrupts" in the device * tree in case the device-tree is ever fixed */ struct of_irq oirq; diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index c4e630576ff2..31036b56670e 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -529,7 +529,7 @@ static int __init pmac_pic_probe_mpic(void) void __init pmac_pic_init(void) { /* We configure the OF parsing based on our oldworld vs. newworld - * platform type and wether we were booted by BootX. + * platform type and whether we were booted by BootX. */ #ifdef CONFIG_PPC32 if (!pmac_newworld) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 14313ad43b76..42509492717e 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1648,7 +1648,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev) ring->wptr = 0; WREG32(CP_RB_WPTR, ring->wptr); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ WREG32(CP_RB_RPTR_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC)); WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 81e6a568c29d..cda01f808f12 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_DEBUG, (1 << 27)); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF); WREG32(SCRATCH_UMSK, 0xff); @@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev) #endif WREG32(cp_rb_cntl[i], rb_cntl); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET; WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC); WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index b0db712060fb..ea4691f79ccd 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev) ring->wptr = 0; WREG32(CP_RB0_WPTR, ring->wptr); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC); WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF); @@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev) ring->wptr = 0; WREG32(CP_RB1_WPTR, ring->wptr); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC); WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF); @@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev) ring->wptr = 0; WREG32(CP_RB2_WPTR, ring->wptr); - /* set the wb address wether it's enabled or not */ + /* set the wb address whether it's enabled or not */ WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC); WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF); diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c index f41502ef3f55..a23b91b0b738 100644 --- a/drivers/i2c/busses/i2c-nuc900.c +++ b/drivers/i2c/busses/i2c-nuc900.c @@ -304,7 +304,7 @@ retry_write: case STATE_READ: /* we have a byte of data in the data register, do - * something with it, and then work out wether we are + * something with it, and then work out whether we are * going to do any more read/write */ diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 3e0335f1fc60..de9e1fa0aa0e 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, if (msg->flags & I2C_M_REV_DIR_ADDR) addr ^= 1; - /* todo - check for wether ack wanted or not */ + /* todo - check for whether ack wanted or not */ s3c24xx_i2c_enable_ack(i2c); iiccon = readl(i2c->regs + S3C2410_IICCON); @@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_READ: /* we have a byte of data in the data register, do - * something with it, and then work out wether we are + * something with it, and then work out whether we are * going to do any more read/write */ diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 891558de3ec1..2de66b062f0d 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev) platram_setrw(info, PLATRAM_RW); - /* check to see if there are any available partitions, or wether + /* check to see if there are any available partitions, or whether * to add this device whole */ err = mtd_device_parse_register(info->mtd, pdata->probes, NULL, diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 295e4bedad96..79ded48e7427 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, if (chip->ecc.mode != NAND_ECC_HW) return; - /* change the behaviour depending on wether we are using + /* change the behaviour depending on whether we are using * the large or small page nand device */ if (chip->page_shift > 10) { diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 203ff9dccadb..846381c31185 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev) /* * ax_initial_check * - * do an initial probe for the card to check wether it exists + * do an initial probe for the card to check whether it exists * and is functional */ static int ax_initial_check(struct net_device *dev) diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h index 7ec4b864a550..75ec5e7cf50d 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h @@ -27,7 +27,7 @@ struct mcp_gen_header { * * Fields below this comment are extensions added in later versions * of this struct, drivers should compare the header_length against - * offsetof(field) to check wether a given MCP implements them. + * offsetof(field) to check whether a given MCP implements them. * * Never remove any field. Keep everything naturally align. */ diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 58f13adaa549..ae7cd7f3656d 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy) if ( mode == BCM54XX_COPPER) return genmii_poll_link(phy); - /* try to find out wether we have a link */ + /* try to find out whether we have a link */ phy_write(phy, MII_NCONFIG, 0x2000); phy_reg = phy_read(phy, MII_NCONFIG); @@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy) phy->speed = SPEED_1000; - /* find out wether we are running half- or full duplex */ + /* find out whether we are running half- or full duplex */ phy_write(phy, MII_NCONFIG, 0x2000); phy_reg = phy_read(phy, MII_NCONFIG); @@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy) if ( mode == BCM54XX_COPPER) return genmii_poll_link(phy); - /* find out wether we have a link */ + /* find out whether we have a link */ phy_write(phy, MII_NCONFIG, 0x7000); phy_reg = phy_read(phy, MII_NCONFIG); @@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy) phy->speed = SPEED_1000; - /* find out wether we are running half- or full duplex */ + /* find out whether we are running half- or full duplex */ phy_write(phy, MII_NCONFIG, 0x7000); phy_reg = phy_read(phy, MII_NCONFIG); diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 26c81f233606..afb7cfa85ccc 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -118,7 +118,7 @@ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[], return ret; } -/* simple check to see wether we have a isl1208 */ +/* simple check to see whether we have a isl1208 */ static int isl1208_i2c_validate_client(struct i2c_client *client) { diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 77823d21d314..a7a2a998fa91 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -186,7 +186,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR); rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC); - /* the only way to work out wether the system was mid-update + /* the only way to work out whether the system was mid-update * when we read it is to check the second counter, and if it * is zero, then we re-try the entire read */ diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index b2b8c18eeced..20cfd028edcf 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -1344,7 +1344,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature) /* * Set / reset given feature. - * Flag indicates wether to set (!=0) or the reset (=0) the feature. + * Flag indicates whether to set (!=0) or the reset (=0) the feature. */ int dasd_set_feature(struct ccw_device *cdev, int feature, int flag) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index d36446dd7ae8..73c93cf364c8 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } else { US_DEBUGP("%s: NOT working scsi, not SS\n", __func__); chip->proto_handler_backup(srb, us); - /* Check wether card is plugged in */ + /* Check whether card is plugged in */ if (srb->cmnd[0] == TEST_UNIT_READY) { if (srb->result == SAM_STAT_GOOD) { SET_LUN_READY(chip, srb->device->lun); diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 5b06d31ab6a9..c0bc92d8e438 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -212,7 +212,7 @@ static long booke_wdt_ioctl(struct file *file, return 0; } -/* wdt_is_active stores wether or not the /dev/watchdog device is opened */ +/* wdt_is_active stores whether or not the /dev/watchdog device is opened */ static unsigned long wdt_is_active; static int booke_wdt_open(struct inode *inode, struct file *file) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 3d3e2c17d8d1..06b2635073f3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3888,7 +3888,7 @@ static int flush_space(struct btrfs_root *root, * @root - the root we're allocating for * @block_rsv - the block_rsv we're allocating for * @orig_bytes - the number of bytes we want - * @flush - wether or not we can flush to make our reservation + * @flush - whether or not we can flush to make our reservation * * This will reserve orgi_bytes number of bytes from the space info associated * with the block_rsv. If there is not enough space it will make an attempt to diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h index dd27a0b46a37..853fc7beedfa 100644 --- a/fs/btrfs/ordered-data.h +++ b/fs/btrfs/ordered-data.h @@ -76,7 +76,7 @@ struct btrfs_ordered_sum { #define BTRFS_ORDERED_IOERR 6 /* We had an io error when writing this out */ -#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates wether this ordered extent +#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates whether this ordered extent * has done its due diligence in updating * the isize. */ diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 3c20de1d59d0..df163da388c9 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2455,7 +2455,7 @@ TAS_BUFFER_FNS(Uninit, uninit) BUFFER_FNS(Da_Mapped, da_mapped) /* - * Add new method to test wether block and inode bitmaps are properly + * Add new method to test whether block and inode bitmaps are properly * initialized. With uninit_bg reading the block from disk is not enough * to mark the bitmap uptodate. We need to also zero-out the bitmap */ diff --git a/fs/fhandle.c b/fs/fhandle.c index f775bfdd6e4a..cccdc874bb55 100644 --- a/fs/fhandle.c +++ b/fs/fhandle.c @@ -22,7 +22,7 @@ static long do_sys_name_to_handle(struct path *path, struct file_handle *handle = NULL; /* - * We need t make sure wether the file system + * We need to make sure whether the file system * support decoding of the file handle */ if (!path->dentry->d_sb->s_export_op || @@ -40,7 +40,7 @@ static long do_sys_name_to_handle(struct path *path, if (!handle) return -ENOMEM; - /* convert handle size to multiple of sizeof(u32) */ + /* convert handle size to multiple of sizeof(u32) */ handle_dwords = f_handle.handle_bytes >> 2; /* we ask for a non connected handle */ diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 78b7f84241d4..8b472c8bbf7a 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -1259,7 +1259,7 @@ int journal_forget (handle_t *handle, struct buffer_head *bh) goto not_jbd; } - /* keep track of wether or not this transaction modified us */ + /* keep track of whether or not this transaction modified us */ was_modified = jh->b_modified; /* diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index a74ba4659549..d8da40e99d84 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -1261,7 +1261,7 @@ int jbd2_journal_forget (handle_t *handle, struct buffer_head *bh) goto not_jbd; } - /* keep track of wether or not this transaction modified us */ + /* keep track of whether or not this transaction modified us */ was_modified = jh->b_modified; /* diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index adb90116d36b..af49e2d6941a 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -33,7 +33,7 @@ * are being written out - and waiting for GC to make progress, naturally. * * So we cannot just call iget() or some variant of it, but first have to check - * wether the inode in question might be in I_FREEING state. Therefore we + * whether the inode in question might be in I_FREEING state. Therefore we * maintain our own per-sb list of "almost deleted" inodes and check against * that list first. Normally this should be at most 1-2 entries long. * diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 7a71ffad037c..cafc7f99e124 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -52,8 +52,8 @@ We replicate IO (more or less synchronously) to local and remote disk. For crash recovery after replication node failure, we need to resync all regions that have been target of in-flight WRITE IO - (in use, or "hot", regions), as we don't know wether or not those WRITEs have - made it to stable storage. + (in use, or "hot", regions), as we don't know whether or not those WRITEs + have made it to stable storage. To avoid a "full resync", we need to persistently track these regions. diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 0ee42d9acdc0..2c02f3a8d2ba 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function acquires VGA resources for the given * card and mark those resources locked. If the resource requested * are "normal" (and not legacy) resources, the arbiter will first check - * wether the card is doing legacy decoding for that type of resource. If + * whether the card is doing legacy decoding for that type of resource. If * yes, the lock is "converted" into a legacy resource lock. * The arbiter will first look for all VGA cards that might conflict * and disable their IOs and/or Memory access, including VGA forwarding @@ -89,7 +89,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function will block if some conflicting card is already locking * one of the required resources (or any resource on a different bus * segment, since P2P bridges don't differenciate VGA memory and IO - * afaik). You can indicate wether this blocking should be interruptible + * afaik). You can indicate whether this blocking should be interruptible * by a signal (for userland interface) or not. * Must not be called at interrupt time or in atomic context. * If the card already owns the resources, the function succeeds. diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index b7f45d48b2de..87490ac4bd87 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -105,7 +105,7 @@ struct watchdog_device { #define WATCHDOG_NOWAYOUT_INIT_STATUS 0 #endif -/* Use the following function to check wether or not the watchdog is active */ +/* Use the following function to check whether or not the watchdog is active */ static inline bool watchdog_active(struct watchdog_device *wdd) { return test_bit(WDOG_ACTIVE, &wdd->status); diff --git a/include/net/sock.h b/include/net/sock.h index c945fba4f543..a95e0756e56e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -213,7 +213,7 @@ struct cg_proto; * @sk_sndbuf: size of send buffer in bytes * @sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE, * %SO_OOBINLINE settings, %SO_TIMESTAMPING settings - * @sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets + * @sk_no_check: %SO_NO_CHECK setting, whether or not checkup packets * @sk_route_caps: route capabilities (e.g. %NETIF_F_TSO) * @sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK) * @sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4) diff --git a/net/can/proc.c b/net/can/proc.c index 3b6dd3180492..ae566902d2bf 100644 --- a/net/can/proc.c +++ b/net/can/proc.c @@ -397,7 +397,7 @@ static inline void can_rcvlist_sff_proc_show_one(struct seq_file *m, int i; int all_empty = 1; - /* check wether at least one list is non-empty */ + /* check whether at least one list is non-empty */ for (i = 0; i < 0x800; i++) if (!hlist_empty(&d->rx_sff[i])) { all_empty = 0; diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index 5d0e568fdea1..dc14234fea29 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -2291,7 +2291,7 @@ static void snd_es1968_chip_init(struct es1968 *chip) outb(0x88, iobase+0x1f); /* it appears some maestros (dell 7500) only work if these are set, - regardless of wether we use the assp or not. */ + regardless of whether we use the assp or not. */ outb(0, iobase + ASSP_CONTROL_B); outb(3, iobase + ASSP_CONTROL_A); /* M: Reserved bits... */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 0f58b4b6d702..007fcecdf5cd 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -675,7 +675,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, */ int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) { - /* it depends on altsetting wether the device is big-endian or not */ + /* it depends on altsetting whether the device is big-endian or not */ switch (chip->usb_id) { case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ if (fp->altsetting == 2 || fp->altsetting == 3 || -- cgit v1.2.3-58-ga151