From d8723ae2a416473f8e974baadcb6acb7f8b0b485 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:49:53 +0100 Subject: OMAP7XX: Serial: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/serial.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec40..49381e271be3 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -110,20 +110,13 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; serial_platform_data[0].irq = INT_730_UART_MODEM_1; serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; } - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; - } - if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; -- cgit v1.2.3-58-ga151 From b718aa810b50e0d988d8b83f1011865b19b17491 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Wed, 23 Sep 2009 18:56:19 +0100 Subject: OMAP7XX: GPIO: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/gpio.c | 133 +++++----------------------------------------- 1 file changed, 14 insertions(+), 119 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea1..665ca050183f 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -83,22 +83,6 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) /* @@ -216,7 +200,6 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -236,7 +219,7 @@ static struct gpio_bank gpio_bank_1510[2] = { }; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_730[7] = { { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, @@ -248,19 +231,6 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, -}; -#endif - - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -402,16 +372,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -469,7 +434,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; l = __raw_readl(reg); @@ -479,16 +444,6 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -537,16 +492,11 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; @@ -588,16 +538,11 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -797,7 +742,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); @@ -809,18 +754,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -897,16 +830,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; @@ -971,20 +899,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; @@ -1044,7 +965,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; l = __raw_readl(reg); @@ -1054,16 +975,6 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -1249,14 +1160,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; @@ -1527,9 +1434,6 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -1695,21 +1599,13 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; gpio_bank = gpio_bank_730; } #endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_850; - } -#endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { int rev; @@ -2160,8 +2056,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { -- cgit v1.2.3-58-ga151 From ab49df737d28c67eb6a5cb5be40dbab43fd7582c Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:58:08 +0100 Subject: OMAP7XX: IO: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/io.c | 29 +++-------------------------- arch/arm/plat-omap/io.c | 2 +- 2 files changed, 4 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7030f9281ea1..19de57f74e84 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -36,7 +36,7 @@ static struct map_desc omap_io_desc[] __initdata = { } }; -#ifdef CONFIG_ARCH_OMAP730 +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct map_desc omap730_io_desc[] __initdata = { { .virtual = OMAP730_DSP_BASE, @@ -52,22 +52,6 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct map_desc omap850_io_desc[] __initdata = { - { - .virtual = OMAP850_DSP_BASE, - .pfn = __phys_to_pfn(OMAP850_DSP_START), - .length = OMAP850_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP850_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP850_DSPREG_START), - .length = OMAP850_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { @@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) */ omap_check_revision(); -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif - -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); - } -#endif - #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index b6defa23e77e..388fd9490939 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -33,7 +33,7 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); -- cgit v1.2.3-58-ga151 From 190215f963551405cc97ed220003bb7524219131 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:58:54 +0100 Subject: OMAP7XX: Mux: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/mux.c | 28 ++------------------ arch/arm/plat-omap/include/mach/mux.h | 50 ----------------------------------- 2 files changed, 2 insertions(+), 76 deletions(-) diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 721e0d9d8b1d..f9d45a3bf4f6 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -35,7 +35,7 @@ static struct omap_mux_cfg arch_mux_cfg; -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct pin_config __initdata_or_module omap730_pins[] = { MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) @@ -58,25 +58,6 @@ MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) #define OMAP730_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP730 */ -#ifdef CONFIG_ARCH_OMAP850 -struct pin_config __initdata_or_module omap850_pins[] = { -MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) -}; -#endif - #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { /* @@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } - -#ifdef CONFIG_ARCH_OMAP850 - omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); -#endif - #endif #ifdef CONFIG_OMAP_MUX_ERRORS @@ -454,7 +430,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { arch_mux_cfg.pins = omap730_pins; arch_mux_cfg.size = OMAP730_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 0f49d2d563d9..587fb63d2323 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -61,16 +61,6 @@ .pull_bit = bit, \ .pull_val = status, -#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ - .pull_reg = OMAP850_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - #else #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ @@ -93,15 +83,6 @@ .pull_bit = bit, \ .pull_val = status, -#define MUX_REG_850(reg, mode_offset, mode) \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - #endif /* CONFIG_OMAP_MUX_DEBUG */ #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ @@ -133,17 +114,6 @@ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_850(mux_reg, mode_offset, mode) \ - PULL_REG_850(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - - #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -251,26 +221,6 @@ enum omap730_index { W17_730_USB_VBUSI, }; -enum omap850_index { - /* OMAP 850 keyboard */ - E2_850_KBR0, - J7_850_KBR1, - E1_850_KBR2, - F3_850_KBR3, - D2_850_KBR4, - C2_850_KBC0, - D3_850_KBC1, - E4_850_KBC2, - F4_850_KBC3, - E3_850_KBC4, - - /* USB */ - AA17_850_USB_DM, - W16_850_USB_PU_EN, - W17_850_USB_VBUSI, -}; - - enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, -- cgit v1.2.3-58-ga151 From 207b0e9cfef296c469cce84f74455f97f8ab2227 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:01:08 +0100 Subject: OMAP7XX: USB: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 509f2ed99e21..980d2eb68a24 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -614,7 +614,7 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_host) { syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) ohci_resources[1].start = INT_730_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) @@ -626,7 +626,7 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) { syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) otg_resources[1].start = INT_730_USB_OTG; status = platform_device_register(&otg_device); if (status) @@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} void __init omap_usb_init(struct omap_usb_config *pdata) { - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) + if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); -- cgit v1.2.3-58-ga151 From 559663b980c8293b3624b4d91d08efc71f6fae82 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:33:04 +0100 Subject: OMAP7XX: IRQ: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This fixes a bug which prevents IRQs from being enabled on omap850 due to a missing check in entry-macro.S, which was found by Cory Maccarrone. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/irq.c | 24 ++------ arch/arm/plat-omap/include/mach/entry-macro.S | 6 +- arch/arm/plat-omap/include/mach/irqs.h | 81 --------------------------- 3 files changed, 7 insertions(+), 104 deletions(-) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index de03c8448994..c05999c41165 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -137,7 +137,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#ifdef CONFIG_ARCH_OMAP730 +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct omap_irq_bank omap730_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, @@ -145,14 +145,6 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct omap_irq_bank omap850_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, @@ -186,18 +178,12 @@ void __init omap_init_irq(void) { int i, j; -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { irq_banks = omap730_irq_banks; irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - irq_banks = omap850_irq_banks; - irq_bank_count = ARRAY_SIZE(omap850_irq_banks); - } -#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; @@ -247,10 +233,8 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap850()) - omap_unmask_irq(INT_850_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index a5592991634d..bcf715856658 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -17,10 +17,10 @@ #if defined(CONFIG_ARCH_OMAP1) -#if defined(CONFIG_ARCH_OMAP730) && \ +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define INT_IH2_IRQ INT_730_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP15XX) #define INT_IH2_IRQ INT_1510_IH2_IRQ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 28a165058b61..7f338f0c7450 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -107,29 +107,6 @@ #define INT_730_GPIO_BANK6 18 #define INT_730_SPGIO_WR 29 -/* - * OMAP-850 specific IRQ numbers for interrupt handler 1 - */ -#define INT_850_IH2_FIQ 0 -#define INT_850_IH2_IRQ 1 -#define INT_850_USB_NON_ISO 2 -#define INT_850_USB_ISO 3 -#define INT_850_ICR 4 -#define INT_850_EAC 5 -#define INT_850_GPIO_BANK1 6 -#define INT_850_GPIO_BANK2 7 -#define INT_850_GPIO_BANK3 8 -#define INT_850_McBSP2TX 10 -#define INT_850_McBSP2RX 11 -#define INT_850_McBSP2RX_OVF 12 -#define INT_850_LCD_LINE 14 -#define INT_850_GSM_PROTECT 15 -#define INT_850_TIMER3 16 -#define INT_850_GPIO_BANK5 17 -#define INT_850_GPIO_BANK6 18 -#define INT_850_SPGIO_WR 29 - - /* * IRQ numbers for interrupt handler 2 * @@ -263,64 +240,6 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) -/* - * OMAP-850 specific IRQ numbers for interrupt handler 2 - */ -#define INT_850_HW_ERRORS (0 + IH2_BASE) -#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_850_CFCD (2 + IH2_BASE) -#define INT_850_CFIREQ (3 + IH2_BASE) -#define INT_850_I2C (4 + IH2_BASE) -#define INT_850_PCC (5 + IH2_BASE) -#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_850_SPI_100K_1 (7 + IH2_BASE) -#define INT_850_SYREN_SPI (8 + IH2_BASE) -#define INT_850_VLYNQ (9 + IH2_BASE) -#define INT_850_GPIO_BANK4 (10 + IH2_BASE) -#define INT_850_McBSP1TX (11 + IH2_BASE) -#define INT_850_McBSP1RX (12 + IH2_BASE) -#define INT_850_McBSP1RX_OF (13 + IH2_BASE) -#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_850_UART_MODEM_1 (15 + IH2_BASE) -#define INT_850_MCSI (16 + IH2_BASE) -#define INT_850_uWireTX (17 + IH2_BASE) -#define INT_850_uWireRX (18 + IH2_BASE) -#define INT_850_SMC_CD (19 + IH2_BASE) -#define INT_850_SMC_IREQ (20 + IH2_BASE) -#define INT_850_HDQ_1WIRE (21 + IH2_BASE) -#define INT_850_TIMER32K (22 + IH2_BASE) -#define INT_850_MMC_SDIO (23 + IH2_BASE) -#define INT_850_UPLD (24 + IH2_BASE) -#define INT_850_USB_HHC_1 (27 + IH2_BASE) -#define INT_850_USB_HHC_2 (28 + IH2_BASE) -#define INT_850_USB_GENI (29 + IH2_BASE) -#define INT_850_USB_OTG (30 + IH2_BASE) -#define INT_850_CAMERA_IF (31 + IH2_BASE) -#define INT_850_RNG (32 + IH2_BASE) -#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_850_DBB_RF_EN (34 + IH2_BASE) -#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_850_SHA1_MD5 (36 + IH2_BASE) -#define INT_850_SPI_100K_2 (37 + IH2_BASE) -#define INT_850_RNG_IDLE (38 + IH2_BASE) -#define INT_850_MPUIO (39 + IH2_BASE) -#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_850_LLPC_VSYNC (43 + IH2_BASE) -#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_850_DMA_CH6 (53 + IH2_BASE) -#define INT_850_DMA_CH7 (54 + IH2_BASE) -#define INT_850_DMA_CH8 (55 + IH2_BASE) -#define INT_850_DMA_CH9 (56 + IH2_BASE) -#define INT_850_DMA_CH10 (57 + IH2_BASE) -#define INT_850_DMA_CH11 (58 + IH2_BASE) -#define INT_850_DMA_CH12 (59 + IH2_BASE) -#define INT_850_DMA_CH13 (60 + IH2_BASE) -#define INT_850_DMA_CH14 (61 + IH2_BASE) -#define INT_850_DMA_CH15 (62 + IH2_BASE) -#define INT_850_NAND (63 + IH2_BASE) - #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 #define INT_24XX_SDMA_IRQ1 13 -- cgit v1.2.3-58-ga151 From 4b9100dde2820296003940ffd81e006c33c9bf5d Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:41:09 +0100 Subject: OMAP7XX: PM: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Original omap850 support in Linwizard was done by cloning the omap730 code. That work was done by Zebediah C. McClure. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/pm.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c0..12f246e3cdca 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -183,7 +183,7 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | OMAP_IRQ_BIT(INT_730_IH2_IRQ); else if (cpu_is_omap15xx()) @@ -195,7 +195,7 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), @@ -253,7 +253,7 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(OMAP_IH1_MIR); MPUI730_SAVE(OMAP_IH2_0_MIR); MPUI730_SAVE(OMAP_IH2_1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,7 +383,7 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_RESTORE(EMIFS_CONFIG); MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); MPUI730_RESTORE(OMAP_IH1_MIR); @@ -461,7 +461,7 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(MPUI_CTRL); MPUI730_SAVE(MPUI_DSP_STATUS); MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -517,7 +517,7 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI730_CTRL_REG 0x%-8x \n" "MPUI730_DSP_STATUS_REG: 0x%-8x \n" @@ -668,7 +668,7 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, omap730_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { @@ -686,7 +686,7 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,7 +700,7 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); -- cgit v1.2.3-58-ga151 From 39a8b08610a10f3456ef9f4a38986d0407f1c57e Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:47:14 +0100 Subject: OMAP7XX: Clocks: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Initial clock support was done in the Linwizard tree by Zebediah C. McClure. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 436eed22801b..fcbea61cb8ca 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) * Reprogramming the DPLL is tricky, it must be done from SRAM. * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); @@ -783,7 +783,7 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) cpu_mask |= CK_730; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -800,7 +800,7 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ck_ref.rate = 13000000; #elif defined(CONFIG_ARCH_OMAP16XX) if (crystal_type == 2) @@ -847,7 +847,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; } #endif @@ -873,7 +873,7 @@ int __init omap1_clk_init(void) /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); else omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); -- cgit v1.2.3-58-ga151 From bf1cb7eb4fe35e50798f03e00d3900db0474f7d0 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:49:35 +0100 Subject: OMAP7XX: McBSP: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/mcbsp.c | 6 +++--- arch/arm/plat-omap/include/mach/mcbsp.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 505d98cfe508..06f380bf221e 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -79,7 +79,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { .phys_base = OMAP730_MCBSP1_BASE, @@ -172,7 +172,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; @@ -184,7 +184,7 @@ int __init omap1_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, OMAP730_MCBSP_PDATA_SZ); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index e0d6eca222cc..0b476b909aa8 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -58,7 +58,7 @@ #define OMAP44XX_MCBSP3_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48074000 -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 -- cgit v1.2.3-58-ga151 From e6684f7132c6e6333e96407b06910bebaa4c1935 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 07:22:56 +0100 Subject: OMAP7XX: Create omap7xx.h This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This include file is intended to replace omap730.h and omap850.h All values defined herein are identical to those in both the old files. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/include/mach/omap7xx.h | 104 ++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 arch/arm/plat-omap/include/mach/omap7xx.h diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h new file mode 100644 index 000000000000..53f52414b0e9 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme + * Adapted for omap850 by Zebediah C. McClure + * Adapted for omap7xx by Alistair Buxton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + -- cgit v1.2.3-58-ga151 From b51988db94faec47d6e7c69c8e691cfc194f66db Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 07:34:13 +0100 Subject: OMAP7XX: Update core omap1 files to use omap7xx.h This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/board-fsample.c | 12 ++++++------ arch/arm/mach-omap1/board-perseus2.c | 12 ++++++------ arch/arm/mach-omap1/clock.c | 2 +- arch/arm/mach-omap1/io.c | 12 ++++++------ arch/arm/plat-omap/include/mach/hardware.h | 2 +- arch/arm/plat-omap/include/mach/mux.h | 14 +++++++------- arch/arm/plat-omap/io.c | 12 ++++++------ 7 files changed, 33 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b93226..e53f7748ac13 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f310..ec22838e8e79 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fcbea61cb8ca..c24cc28238f9 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 19de57f74e84..157d5082ffea 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = { #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct map_desc omap730_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 26c1fbff08aa..99c42412c0a1 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -280,7 +280,7 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" +#include "omap7xx.h" #include "omap1510.h" #include "omap16xx.h" #include "omap24xx.h" diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 587fb63d2323..66ae302f0c0f 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,13 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -75,11 +75,11 @@ .pu_pd_val = status, #define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 388fd9490939..23a205f4a2b1 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,7 +13,7 @@ #include #include -#include +#include #include #include #include @@ -34,12 +34,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } if (cpu_is_omap7xx()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) -- cgit v1.2.3-58-ga151 From 372b1c32e7e7d7aa5f44e0eaed4ad8ae21e4e9da Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Fri, 18 Sep 2009 04:09:39 +0100 Subject: OMAP7XX: Replace omap730 references in irqs.h and all users This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/board-fsample.c | 6 +- arch/arm/mach-omap1/board-perseus2.c | 6 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/mcbsp.c | 8 +- arch/arm/mach-omap1/pm.c | 10 +- arch/arm/mach-omap1/serial.c | 4 +- arch/arm/plat-omap/gpio.c | 14 +-- arch/arm/plat-omap/include/mach/entry-macro.S | 2 +- arch/arm/plat-omap/include/mach/irqs.h | 148 +++++++++++++------------- arch/arm/plat-omap/usb.c | 4 +- 10 files changed, 102 insertions(+), 102 deletions(-) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index e53f7748ac13..74720e65f114 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ec22838e8e79..2f897cf23504 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index c05999c41165..704a80c29725 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -234,7 +234,7 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ if (cpu_is_omap7xx()) - omap_unmask_irq(INT_730_IH2_IRQ); + omap_unmask_irq(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 06f380bf221e..7ccca0069dce 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -85,16 +85,16 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .phys_base = OMAP730_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_730_McBSP1RX, - .tx_irq = INT_730_McBSP1TX, + .rx_irq = INT_7XX_McBSP1RX, + .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { .phys_base = OMAP730_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_730_McBSP2RX, - .tx_irq = INT_730_McBSP2TX, + .rx_irq = INT_7XX_McBSP2RX, + .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 12f246e3cdca..58479c75cac4 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -184,8 +184,8 @@ static void omap_pm_wakeup_setup(void) * wake up to a GPIO interrupt. */ if (cpu_is_omap7xx()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); + level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); @@ -197,8 +197,8 @@ static void omap_pm_wakeup_setup(void) if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); @@ -687,7 +687,7 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 49381e271be3..ed07af109f00 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -113,8 +113,8 @@ void __init omap_serial_init(void) if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 665ca050183f..22f6e689f5c0 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -221,13 +221,13 @@ static struct gpio_bank gpio_bank_1510[2] = { #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP730_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, + { OMAP730_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, + { OMAP730_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, + { OMAP730_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, + { OMAP730_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, + { OMAP730_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, }; #endif diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index bcf715856658..abe086416e19 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -21,7 +21,7 @@ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) #error "FIXME: OMAP7XX doesn't support multiple-OMAP" #elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -#define INT_IH2_IRQ INT_730_IH2_IRQ +#define INT_IH2_IRQ INT_7XX_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP15XX) #define INT_IH2_IRQ INT_1510_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP16XX) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 7f338f0c7450..6a6d0281e1d5 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -86,26 +86,26 @@ #define INT_1610_SSR_FIFO_0 29 /* - * OMAP-730 specific IRQ numbers for interrupt handler 1 + * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 @@ -183,62 +183,62 @@ #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* - * OMAP-730 specific IRQ numbers for interrupt handler 2 + * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 980d2eb68a24..3c40b8525df6 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -615,7 +615,7 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; if (cpu_is_omap7xx()) - ohci_resources[1].start = INT_730_USB_HHC_1; + ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -627,7 +627,7 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; if (cpu_is_omap7xx()) - otg_resources[1].start = INT_730_USB_OTG; + otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(&otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); -- cgit v1.2.3-58-ga151 From 7c0069264017fdac8ef017b8893f0f0d7a13851a Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 10:02:58 +0100 Subject: OMAP7XX: Rename all the rest of the omap730 references in omap1 core This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This updates all the remaining omap730 references in miscellaneous local variables, macros and similar. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 8 +-- arch/arm/mach-omap1/io.c | 4 +- arch/arm/mach-omap1/irq.c | 6 +-- arch/arm/mach-omap1/mcbsp.c | 18 +++---- arch/arm/mach-omap1/mux.c | 42 +++++++-------- arch/arm/mach-omap1/pm.c | 70 ++++++++++++------------- arch/arm/mach-omap1/pm.h | 52 +++++++++---------- arch/arm/mach-omap1/sleep.S | 22 ++++---- arch/arm/plat-omap/devices.c | 22 ++++---- arch/arm/plat-omap/gpio.c | 92 ++++++++++++++++----------------- arch/arm/plat-omap/include/mach/mcbsp.h | 4 +- arch/arm/plat-omap/include/mach/mux.h | 42 +++++++-------- 12 files changed, 191 insertions(+), 191 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index c24cc28238f9..d2b00a56393d 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -69,7 +69,7 @@ struct omap_clk { } #define CK_310 (1 << 0) -#define CK_730 (1 << 1) +#define CK_7XX (1 << 1) #define CK_1510 (1 << 2) #define CK_16XX (1 << 3) @@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), @@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), @@ -784,7 +784,7 @@ int __init omap1_clk_init(void) if (cpu_is_omap1510()) cpu_mask |= CK_1510; if (cpu_is_omap7xx()) - cpu_mask |= CK_730; + cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 157d5082ffea..a27df2c14acb 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -37,7 +37,7 @@ static struct map_desc omap_io_desc[] __initdata = { }; #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct map_desc omap730_io_desc[] __initdata = { +static struct map_desc omap7xx_io_desc[] __initdata = { { .virtual = OMAP7XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP7XX_DSP_START), @@ -106,7 +106,7 @@ void __init omap1_map_common_io(void) #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif #ifdef CONFIG_ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 704a80c29725..8f98b58575da 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -138,7 +138,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) } #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct omap_irq_bank omap730_irq_banks[] = { +static struct omap_irq_bank omap7xx_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, @@ -180,8 +180,8 @@ void __init omap_init_irq(void) #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - irq_banks = omap730_irq_banks; - irq_bank_count = ARRAY_SIZE(omap730_irq_banks); + irq_banks = omap7xx_irq_banks; + irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 7ccca0069dce..3a51cb210de6 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -80,9 +80,9 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { }; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { +static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP730_MCBSP1_BASE, + .phys_base = OMAP7XX_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_7XX_McBSP1RX, @@ -90,7 +90,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP730_MCBSP2_BASE, + .phys_base = OMAP7XX_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_7XX_McBSP2RX, @@ -98,10 +98,10 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, }; -#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) +#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) #else -#define omap730_mcbsp_pdata NULL -#define OMAP730_MCBSP_PDATA_SZ 0 +#define omap7xx_mcbsp_pdata NULL +#define OMAP7XX_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -173,7 +173,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; if (cpu_is_omap16xx()) @@ -185,8 +185,8 @@ int __init omap1_mcbsp_init(void) return -ENOMEM; if (cpu_is_omap7xx()) - omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, - OMAP730_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_PDATA_SZ); if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index f9d45a3bf4f6..d59899d6a7fe 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -36,27 +36,27 @@ static struct omap_mux_cfg arch_mux_cfg; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) +static struct pin_config __initdata_or_module omap7xx_pins[] = { +MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else -#define omap730_pins NULL -#define OMAP730_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 */ +#define omap7xx_pins NULL +#define OMAP7XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { @@ -431,8 +431,8 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { if (cpu_is_omap7xx()) { - arch_mux_cfg.pins = omap730_pins; - arch_mux_cfg.size = OMAP730_PINS_SZ; + arch_mux_cfg.pins = omap7xx_pins; + arch_mux_cfg.size = OMAP7XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 58479c75cac4..10f4e4adca17 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -62,7 +62,7 @@ static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -254,14 +254,14 @@ void omap1_pm_suspend(void) */ if (cpu_is_omap7xx()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(OMAP_IH1_MIR); + MPUI7XX_SAVE(OMAP_IH2_0_MIR); + MPUI7XX_SAVE(OMAP_IH2_1_MIR); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); @@ -384,11 +384,11 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_STATUS_REQ); if (cpu_is_omap7xx()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); + MPUI7XX_RESTORE(EMIFS_CONFIG); + MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI7XX_RESTORE(OMAP_IH1_MIR); + MPUI7XX_RESTORE(OMAP_IH2_0_MIR); + MPUI7XX_RESTORE(OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); @@ -462,12 +462,12 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_POWER_CTRL); if (cpu_is_omap7xx()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_STATUS); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); @@ -519,18 +519,18 @@ static int omap_pm_read_proc( if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); + "MPUI7XX_CTRL_REG 0x%-8x \n" + "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" + "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI7XX_SHOW(MPUI_CTRL), + MPUI7XX_SHOW(MPUI_DSP_STATUS), + MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), + MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), + MPUI7XX_SHOW(EMIFS_CONFIG)); } else if (cpu_is_omap15xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" @@ -669,8 +669,8 @@ static int __init omap_pm_init(void) * memory the MPU can see when it wakes up. */ if (cpu_is_omap7xx()) { - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); + omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, + omap7xx_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); @@ -701,7 +701,7 @@ static int __init omap_pm_init(void) /* Configure IDLECT3 */ if (cpu_is_omap7xx()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index c4f05bdcf8a6..0f20aedd63f4 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -98,11 +98,11 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 +#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP7XX_IDLECT3_VAL 0x3f +#define OMAP7XX_IDLECT3 0xfffece24 +#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ @@ -122,17 +122,17 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap730_idle_loop_suspend(void); +extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -155,9 +155,9 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] +#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) +#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) @@ -232,24 +232,24 @@ enum mpui1510_save_state { #endif }; -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, +enum mpui7xx_save_state { + MPUI7XX_SLEEP_SAVE_START = 0, /* * MPUI registers 32 bits */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE + MPUI7XX_SLEEP_SAVE_MPUI_CTRL, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, + MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + MPUI7XX_SLEEP_SAVE_SIZE #else - MPUI730_SLEEP_SAVE_SIZE = 0 + MPUI7XX_SLEEP_SAVE_SIZE = 0 #endif }; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 22e8568339b0..ef771ce8b030 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/sleep.S * - * Low-level OMAP730/1510/1610 sleep/wakeUp support + * Low-level OMAP7XX/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake @@ -57,8 +57,8 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_cpu_suspend) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +ENTRY(omap7xx_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} @@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) @ turn off clock domains @ do not disable PERCK (0x04) - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ disable instruction cache @@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt /* - * omap730_cpu_suspend()'s resume point. + * omap7xx_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. @@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) @ restore regs and return ldmfd sp!, {r0 - r12, pc} -ENTRY(omap730_cpu_suspend_sz) - .word . - omap730_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 */ +ENTRY(omap7xx_cpu_suspend_sz) + .word . - omap7xx_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a64b692a1bfe..d2f54753b016 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -113,17 +113,17 @@ static void omap_init_kp(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); } else if (machine_is_omap_h4()) { omap_cfg_reg(T19_24XX_KBR0); omap_cfg_reg(R19_24XX_KBR1); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 22f6e689f5c0..b0c73613a4e9 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -68,20 +68,20 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 +#define OMAP7XX_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +#define OMAP7XX_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +#define OMAP7XX_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +#define OMAP7XX_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +#define OMAP7XX_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +#define OMAP7XX_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) @@ -199,7 +199,7 @@ struct gpio_bank { #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -220,14 +220,14 @@ static struct gpio_bank gpio_bank_1510[2] = { #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct gpio_bank gpio_bank_730[7] = { +static struct gpio_bank gpio_bank_7xx[7] = { { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP7XX_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_7XX }, }; #endif @@ -373,8 +373,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -435,8 +435,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -493,8 +493,8 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -539,8 +539,8 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -743,8 +743,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -831,8 +831,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -900,8 +900,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -966,8 +966,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1161,8 +1161,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1431,8 +1431,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1603,7 +1603,7 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap7xx()) { printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; - gpio_bank = gpio_bank_730; + gpio_bank = gpio_bank_7xx; } #endif #ifdef CONFIG_ARCH_OMAP24XX @@ -1664,11 +1664,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 0b476b909aa8..7e9cae3e3d15 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -30,8 +30,8 @@ #include #include -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 #define OMAP1510_MCBSP1_BASE 0xe1011800 #define OMAP1510_MCBSP2_BASE 0xfffb1000 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 66ae302f0c0f..f3c1d8a90456 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,12 +51,12 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -74,12 +74,12 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) \ +#define MUX_REG_7XX(reg, mode_offset, mode) \ .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -104,13 +104,13 @@ * - for pull-up/down, only has one enable bit which is is in the same register * as mux config */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ pull_bit, pull_status, debug_status)\ { \ .name = desc, \ .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ PU_PD_REG(NA, 0) \ }, @@ -202,23 +202,23 @@ struct pin_config { }; -enum omap730_index { +enum omap7xx_index { /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, }; enum omap1xxx_index { -- cgit v1.2.3-58-ga151 From 7a8f48f8c611ac8c07023260258e2fec312b9242 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 10:04:51 +0100 Subject: OMAP7XX: omap_uwire.c: Convert to omap7xx.h This also replaces CPU checks with cpu_is_omap7xx() Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- drivers/spi/omap_uwire.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index e75ba9b28898..7bcf409792c7 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -52,7 +52,7 @@ #include #include -#include /* OMAP730_IO_CONF registers */ +#include /* OMAP7XX_IO_CONF registers */ /* FIXME address is now a platform device resource, @@ -504,7 +504,7 @@ static int __init uwire_probe(struct platform_device *pdev) } clk_enable(uwire->ck); - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) uwire_idx_shift = 1; else uwire_idx_shift = 2; @@ -573,8 +573,8 @@ static int __init omap_uwire_init(void) } if (machine_is_omap_perseus2()) { /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9); + int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; + omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); } return platform_driver_probe(&uwire_driver, uwire_probe); -- cgit v1.2.3-58-ga151 From ab985ff471048479b475f973358ccc6af8e42bc4 Mon Sep 17 00:00:00 2001 From: Angelo Arrifano Date: Fri, 4 Sep 2009 23:41:49 +0100 Subject: OMAP7XX: Clocks: Add ck_ref and armxor These clocks are required for booting. Signed-off-by: Angelo Arrifano Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index d2b00a56393d..5f77b8355b41 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -75,7 +75,7 @@ struct omap_clk { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), @@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), -- cgit v1.2.3-58-ga151 From 1f73b4de93e06d18c28cb282761c8507bc476489 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Fri, 18 Sep 2009 20:53:04 +0100 Subject: OMAP850: PM: Add an ARCH_OMAP850 check This just makes the same warning be printed on omap850 and omap730. Signed-off-by: Alistair Buxton --- arch/arm/mach-omap1/pm.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index 0f20aedd63f4..56a647986ae9 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -105,6 +105,7 @@ #define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP850) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" -- cgit v1.2.3-58-ga151 From f8631e7bba34d46d6ccea4cd90f7a0482770ff70 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 10:05:30 +0100 Subject: OMAP850: Fix zImage booting This adds the OMAP850 JTAG ID to the IDs checked by OMAP uncompress.h putc. Without this putc hangs up trying to check the uarts and zImage crashes. Signed-off-by: Alistair Buxton --- arch/arm/plat-omap/include/mach/uncompress.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h index 0814c5f210c3..ddf7b88dec4d 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/mach/uncompress.h @@ -25,6 +25,7 @@ unsigned int system_rev; #define UART_OMAP_MDR1 0x08 /* mode definition register */ #define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C #define ID_MASK 0x7fff #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK @@ -53,7 +54,7 @@ static void putc(int c) /* MMU is not on, so cpu_is_omapXXXX() won't work here */ unsigned int omap_id = omap_get_id(); - if (omap_id == OMAP_ID_730) + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) shift = 0; if (check_port(uart, shift)) -- cgit v1.2.3-58-ga151 From 84f90c9cc81d8db172d4f768fc4010f508897366 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Oct 2009 09:53:00 -0700 Subject: omap: Change low-level serial init to use ioremap Change low-level serial init to use ioremap Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/serial.c | 11 ++++++++--- arch/arm/mach-omap2/serial.c | 14 ++++++++++---- 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index ed07af109f00..cab41713fce2 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, @@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, @@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, @@ -126,6 +123,14 @@ void __init omap_serial_init(void) for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { unsigned char reg; + /* Static mapping, never released */ + serial_platform_data[i].membase = + ioremap(serial_platform_data[i].mapbase, SZ_2K); + if (!serial_platform_data[i].membase) { + printk(KERN_ERR "Could not ioremap uart%i\n", i); + continue; + } + switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae2186892c85..a1949d4262cd 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -73,7 +73,6 @@ static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data0[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, @@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = { static struct plat_serial8250_port serial_platform_data1[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, @@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = { static struct plat_serial8250_port serial_platform_data2[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, @@ -126,7 +123,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { #ifdef CONFIG_ARCH_OMAP4 static struct plat_serial8250_port serial_platform_data3[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), .mapbase = OMAP_UART4_BASE, .irq = 70, .flags = UPF_BOOT_AUTOCONF, @@ -605,6 +601,16 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* + * Module 4KB + L4 interconnect 4KB + * Static mapping, never released + */ + p->membase = ioremap(p->mapbase, SZ_8K); + if (!p->membase) { + printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + continue; + } + sprintf(name, "uart%d_ick", i+1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { -- cgit v1.2.3-58-ga151 From 1b26fe868a7eb39df924f1173fb43a5c8d640822 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:13 -0700 Subject: omap: Use ioremap in irq.c Use ioremap in irq.c Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index b82863887f10..1db121f437d2 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -178,12 +178,20 @@ void __init omap_init_irq(void) int i; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + unsigned long base; struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + base = OMAP24XX_IC_BASE; else if (cpu_is_omap34xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); + base = OMAP34XX_IC_BASE; + + /* Static mapping, never released */ + bank->base_reg = ioremap(base, SZ_4K); + if (!bank->base_reg) { + printk(KERN_ERR "Could not ioremap irq bank%i\n", i); + continue; + } omap_irq_bank_init_one(bank); -- cgit v1.2.3-58-ga151 From 7e9bf8475f4cd36e71a42cf5b33626a21ffec007 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:15 -0700 Subject: omap: Use ioremap in dma.c Use ioremap in dma.c Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 0eb676d7e807..034686d66894 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2347,40 +2347,46 @@ EXPORT_SYMBOL(omap_stop_lcd_dma); static int __init omap_init_dma(void) { + unsigned long base; int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); + base = OMAP1_DMA_BASE; dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); + base = OMAP24XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); + base = OMAP34XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap44xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); + base = OMAP44XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); return -ENODEV; } + omap_dma_base = ioremap(base, SZ_4K); + BUG_ON(!omap_dma_base); + if (cpu_class_is_omap2() && omap_dma_reserve_channels && (omap_dma_reserve_channels <= dma_lch_count)) dma_lch_count = omap_dma_reserve_channels; dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, GFP_KERNEL); - if (!dma_chan) - return -ENOMEM; + if (!dma_chan) { + r = -ENOMEM; + goto out_unmap; + } if (cpu_class_is_omap2()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { - kfree(dma_chan); - return -ENOMEM; + r = -ENOMEM; + goto out_free; } } @@ -2454,7 +2460,7 @@ static int __init omap_init_dma(void) for (i = 0; i < ch; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } } @@ -2496,11 +2502,19 @@ static int __init omap_init_dma(void) "(error %d)\n", r); for (i = 0; i < dma_chan_count; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } return 0; + +out_free: + kfree(dma_chan); + +out_unmap: + iounmap(omap_dma_base); + + return r; } arch_initcall(omap_init_dma); -- cgit v1.2.3-58-ga151 From 3566fc63589c6f45f31a82aeeb0af6e83adada1f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:18 -0700 Subject: omap: Use ioremap in dmtimer.c Use ioremap in dmtimer.c Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index d325b54daeb5..e4e848ebbfe6 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; - int i; + int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) return -ENODEV; spin_lock_init(&dm_timer_lock); - if (cpu_class_is_omap1()) + if (cpu_class_is_omap1()) { dm_timers = omap1_dm_timers; - else if (cpu_is_omap24xx()) { + map_size = SZ_2K; + } else if (cpu_is_omap24xx()) { dm_timers = omap2_dm_timers; dm_source_names = omap2_dm_source_names; dm_source_clocks = omap2_dm_source_clocks; @@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - if (cpu_class_is_omap1()) - timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base); - else - timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base); + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, map_size); + BUG_ON(!timer->io_base); + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { -- cgit v1.2.3-58-ga151 From 9f7065dab5d12b10c1a77134cb1a3f7c5fd17f4f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:20 -0700 Subject: omap: Use ioremap in gpio.c Use ioremap in gpio.c Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 224 ++++++++++++++++++++++++++-------------------- 1 file changed, 129 insertions(+), 95 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b0c73613a4e9..35a59ce5a2b4 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) +#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -45,10 +45,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) -#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) -#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) -#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -70,12 +70,12 @@ /* * OMAP7XX specific GPIO registers */ -#define OMAP7XX_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP7XX_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP7XX_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP7XX_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP7XX_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP7XX_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 #define OMAP7XX_GPIO_DATA_INPUT 0x00 #define OMAP7XX_GPIO_DATA_OUTPUT 0x04 #define OMAP7XX_GPIO_DIR_CONTROL 0x08 @@ -83,21 +83,21 @@ #define OMAP7XX_GPIO_INT_MASK 0x10 #define OMAP7XX_GPIO_INT_STATUS 0x14 -#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) -#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) -#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) -#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) +#define OMAP242X_GPIO1_BASE 0x48018000 +#define OMAP242X_GPIO2_BASE 0x4801a000 +#define OMAP242X_GPIO3_BASE 0x4801c000 +#define OMAP242X_GPIO4_BASE 0x4801e000 -#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) -#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) -#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) -#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) -#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) +#define OMAP243X_GPIO1_BASE 0x4900C000 +#define OMAP243X_GPIO2_BASE 0x4900E000 +#define OMAP243X_GPIO3_BASE 0x49010000 +#define OMAP243X_GPIO4_BASE 0x49012000 +#define OMAP243X_GPIO5_BASE 0x480B6000 #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -154,24 +154,25 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) -#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) -#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) -#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) -#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) -#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 /* * OMAP44XX specific GPIO registers */ -#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) -#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) -#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) -#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) -#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) -#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) +#define OMAP44XX_GPIO1_BASE 0x4a310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { + unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; @@ -204,77 +205,106 @@ struct gpio_bank { #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, - { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, + METHOD_GPIO_1610 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1510 } }; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_7xx[7] = { - { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP7XX_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_7XX }, - { OMAP7XX_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_7XX }, - { OMAP7XX_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_7XX }, - { OMAP7XX_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_7XX }, - { OMAP7XX_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_7XX }, - { OMAP7XX_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_7XX }, + { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_7XX }, }; #endif #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, }; static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP34XX static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP4 static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, }; @@ -1511,6 +1541,23 @@ static struct clk * gpio5_fck; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +static void __init omap_gpio_show_rev(void) +{ + u32 rev; + + if (cpu_is_omap16xx()) + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ @@ -1521,6 +1568,7 @@ static int __init _omap_gpio_init(void) int i; int gpio = 0; struct gpio_bank *bank; + int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ char clk_name[11]; initialized = 1; @@ -1583,69 +1631,45 @@ static int __init _omap_gpio_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { - printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; + bank_size = SZ_2K; } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - u32 rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); + bank_size = SZ_2K; } #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; gpio_bank = gpio_bank_7xx; + bank_size = SZ_2K; } #endif #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { - int rev; - gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } if (cpu_is_omap243x()) { - int rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP4 if (cpu_is_omap44xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); - printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif for (i = 0; i < gpio_bank_count; i++) { @@ -1653,6 +1677,14 @@ static int __init _omap_gpio_init(void) bank = &gpio_bank[i]; spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + bank->base = ioremap(bank->pbase, bank_size); + if (!bank->base) { + printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); + continue; + } + if (bank_is_mpuio(bank)) __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { @@ -1758,6 +1790,8 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); + omap_gpio_show_rev(); + return 0; } -- cgit v1.2.3-58-ga151 From 986a13f508156e1d041d59166beb2a3dec2ddfad Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:22 -0700 Subject: omap: Use ioremap in omap_hwmod.c Use ioremap in omap_hwmod.c Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d2e0f1c95961..8ac8798feb92 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) struct omap_hwmod_addr_space *mem; int i; int found = 0; + void __iomem *va_start; if (!oh || oh->slaves_cnt == 0) return NULL; @@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) } } - /* XXX use ioremap() instead? */ - - if (found) + if (found) { + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); + if (!va_start) { + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + return NULL; + } pr_debug("omap_hwmod: %s: MPU register target at va %p\n", - oh->name, OMAP2_IO_ADDRESS(mem->pa_start)); - else + oh->name, va_start); + } else { pr_debug("omap_hwmod: %s: no MPU register target found\n", oh->name); + } - return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL; + return (found) ? va_start : NULL; } /** @@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: unregistering\n", oh->name); mutex_lock(&omap_hwmod_mutex); + iounmap(oh->_rt_va); list_del(&oh->node); mutex_unlock(&omap_hwmod_mutex); -- cgit v1.2.3-58-ga151 From f059429ea055c71648ae81c581eaa91d3761942b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:24 -0700 Subject: omap: Use getnstimeofday for omap_device Use getnstimeofday for omap_device Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/omap_device.c | 50 +++++++++++++++------------------------- 1 file changed, 19 insertions(+), 31 deletions(-) diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 2c409fc6dd21..12513f493daf 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -102,21 +102,6 @@ /* Private functions */ -/** - * _read_32ksynct - read the OMAP 32K sync timer - * - * Returns the current value of the 32KiHz synchronization counter. - * XXX this should be generalized to simply read the system clocksource. - * XXX this should be moved to a separate synctimer32k.c file - */ -static u32 _read_32ksynct(void) -{ - if (!cpu_class_is_omap2()) - BUG(); - - return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010)); -} - /** * _omap_device_activate - increase device readiness * @od: struct omap_device * @@ -133,13 +118,13 @@ static u32 _read_32ksynct(void) */ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: activating\n", od->pdev.name); while (od->pm_lat_level > 0) { struct omap_device_pm_latency *odpl; - int act_lat = 0; + unsigned long long act_lat = 0; od->pm_lat_level--; @@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->activate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat); + "%llu usec\n", od->pdev.name, od->pm_lat_level, + act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " - "activate step %d took longer than expected (%d > %d)\n", + "activate step %d took longer than expected (%llu > %d)\n", od->pdev.name, od->pdev.id, od->pm_lat_level, act_lat, odpl->activate_lat); @@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) */ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: deactivating\n", od->pdev.name); while (od->pm_lat_level < od->pm_lats_cnt) { struct omap_device_pm_latency *odpl; - int deact_lat = 0; + unsigned long long deact_lat = 0; odpl = od->pm_lats + od->pm_lat_level; @@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->deactivate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, + "%llu usec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " - "deactivate step %d took longer than expected (%d > %d)\n", - od->pdev.name, od->pdev.id, od->pm_lat_level, - deact_lat, odpl->deactivate_lat); + "deactivate step %d took longer than expected " + "(%llu > %d)\n", od->pdev.name, od->pdev.id, + od->pm_lat_level, deact_lat, odpl->deactivate_lat); od->dev_wakeup_lat += odpl->activate_lat; -- cgit v1.2.3-58-ga151 From e4e7a13af2007edf215ad1164fc8d94c366cb72c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:26 -0700 Subject: omap: Use ioremap for omap4 L4 code Use ioremap for omap4 L4 code Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 13 ++++++++++-- arch/arm/mach-omap2/omap-smp.c | 29 +++++++++++++++++++-------- arch/arm/mach-omap2/timer-gp.c | 3 ++- arch/arm/plat-omap/common.c | 3 +++ arch/arm/plat-omap/include/mach/common.h | 3 +++ arch/arm/plat-omap/include/mach/entry-macro.S | 2 ++ arch/arm/plat-omap/include/mach/omap44xx.h | 5 ----- 7 files changed, 42 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40ea83a..1035b22441ba 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { static void __init gic_init_irq(void) { - gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + void __iomem *base; + + /* Static mapping, never released */ + base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); + BUG_ON(!base); + gic_dist_init(0, base, 29); + + /* Static mapping, never released */ + gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!gic_cpu_base_addr); + gic_cpu_init(0, gic_cpu_base_addr); } static void __init omap_4430sdp_init_irq(void) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 48ee295db275..8813ac25c5ed 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,13 +24,14 @@ #include #include #include +#include /* Registers used for communicating startup information */ -#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) -#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) +static void __iomem *omap4_auxcoreboot_reg0; +static void __iomem *omap4_auxcoreboot_reg1; /* SCU base address */ -static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; +static void __iomem *scu_base; /* * Use SCU config register to count number of cores @@ -53,8 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + gic_cpu_init(0, gic_cpu_base_addr); /* * Synchronise with the boot thread. @@ -79,7 +79,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + __raw_writel(cpu, omap4_auxcoreboot_reg1); smp_wmb(); timeout = jiffies + (1 * HZ); @@ -104,7 +104,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ __raw_writel(virt_to_phys(omap_secondary_startup), \ - OMAP4_AUXCOREBOOT_REG0); + omap4_auxcoreboot_reg0); smp_wmb(); /* @@ -120,7 +120,13 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { - unsigned int i, ncores = get_core_count(); + unsigned int i, ncores; + + /* Never released */ + scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256); + BUG_ON(!scu_base); + + ncores = get_core_count(); for (i = 0; i < ncores; i++) set_cpu_possible(i, true); @@ -130,6 +136,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); + void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -161,6 +168,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); + /* Never released */ + omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + BUG_ON(!omap4_wkupgen_base); + omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; + omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; + if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index e2338c0aebcf..cd729706b3a9 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); #endif omap_dm_timer_init(); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 3a4768d55895..fdcb1cfd0c35 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -49,6 +49,9 @@ int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; +/* used by omap-smp.c and board-4430sdp.c */ +void __iomem *gic_cpu_base_addr; + static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { struct omap_board_config_kernel *kinfo = NULL; diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index fdeab421b4dc..064f1730f43b 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -31,6 +31,9 @@ struct sys_timer; +/* used by omap-smp.c and board-4430sdp.c */ +extern void __iomem *gic_cpu_base_addr; + extern void omap_map_common_io(void); extern struct sys_timer omap_timer; #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index abe086416e19..3bad928c6315 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -104,6 +104,8 @@ .endm #else +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + /* * The interrupt numbering scheme is defined in the * interrupt controller spec. To wit: diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h index b3ba5ac7b4a4..8b4a57875dab 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -33,14 +33,9 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) #define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE) #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) -#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 #define OMAP44XX_WKUPGEN_BASE 0x48281000 -#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) #endif /* __ASM_ARCH_OMAP44XX_H */ -- cgit v1.2.3-58-ga151 From b0002e0e37de53782580a7587ad26b2131555653 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 15:25:28 -0700 Subject: omap: Use ioremap in dispc.c Use ioremap in dispc.c Cc: Imre Deak Cc: Tomi Valkeinen Signed-off-by: Tony Lindgren --- drivers/video/omap/dispc.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index f16e42154229..6f957ceee084 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -204,6 +204,7 @@ static u32 inline dispc_read_reg(int idx) /* Select RFBI or bypass mode */ static void enable_rfbi_mode(int enable) { + void __iomem *rfbi_control; u32 l; l = dispc_read_reg(DISPC_CONTROL); @@ -216,9 +217,15 @@ static void enable_rfbi_mode(int enable) dispc_write_reg(DISPC_CONTROL, l); /* Set bypass mode in RFBI module */ - l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL)); + rfbi_control = ioremap(RFBI_CONTROL, SZ_1K); + if (!rfbi_control) { + pr_err("Unable to ioremap rfbi_control\n"); + return; + } + l = __raw_readl(rfbi_control); l |= enable ? 0 : (1 << 1); - __raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL)); + __raw_writel(l, rfbi_control); + iounmap(rfbi_control); } static void set_lcd_data_lines(int data_lines) @@ -1367,6 +1374,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, int r; u32 l; struct lcd_panel *panel = fbdev->panel; + void __iomem *ram_fw_base; int tmo = 10000; int skip_init = 0; int i; @@ -1441,7 +1449,13 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, } /* L3 firewall setting: enable access to OCM RAM */ - __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); + ram_fw_base = ioremap(0x68005000, SZ_1K); + if (!ram_fw_base) { + dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n"); + goto fail1; + } + __raw_writel(0x402000b0, ram_fw_base + 0xa0); + iounmap(ram_fw_base); if ((r = alloc_palette_ram()) < 0) goto fail2; -- cgit v1.2.3-58-ga151 From 233fd64e7f42a7b8e827ee02528474e0fabfebdc Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 19 Oct 2009 15:25:31 -0700 Subject: omap: Split OMAP2_IO_ADDRESS to L3 and L4 This patch splits OMAP2_IO_ADDRESS to OMAP2_L3_IO_ADDRESS and OMAP2_L4_IO_ADDRESS to reclaim more IO space. The omap_read*() and omap_write*() functions will work only over L4 address space. Current omap kernel stack uses these functions only to access registers over L4 io address space Note that these macros should only be used when ioremap does not work. Please use ioremap instead in all new code. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cm.h | 6 ++-- arch/arm/mach-omap2/pm-debug.c | 3 +- arch/arm/mach-omap2/prm.h | 6 ++-- arch/arm/mach-omap2/sdrc.h | 9 ++++-- arch/arm/mach-omap2/sram242x.S | 4 +-- arch/arm/mach-omap2/sram243x.S | 4 +-- arch/arm/plat-omap/common.c | 44 +++++++++++++-------------- arch/arm/plat-omap/include/mach/control.h | 15 +++++---- arch/arm/plat-omap/include/mach/entry-macro.S | 6 ++-- arch/arm/plat-omap/include/mach/io.h | 6 ++-- arch/arm/plat-omap/include/mach/sdrc.h | 6 ++-- arch/arm/plat-omap/io.c | 12 ++++---- arch/arm/plat-omap/sram.c | 20 ++++++------ 13 files changed, 75 insertions(+), 66 deletions(-) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index cfd0b726ba44..a2fcfcc253cc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) /* * Architecture-specific global CM registers diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 2fc4d6abbd0a..deed1ddd039a 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -51,7 +51,8 @@ int omap2_pm_debug; regs[reg_count++].val = __raw_readl(reg) #define DUMP_INTC_REG(reg, off) \ regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off))) + regs[reg_count++].val = \ + __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) static int __init pm_dbg_init(void); diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 03c467c35f54..a117f853ea39 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 0837eda5f2b6..345183dbc7fb 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg) return __raw_readl(OMAP_SMS_REGADDR(reg)); } #else -#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) -#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) -#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) +#define OMAP242X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +#define OMAP243X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +#define OMAP34XX_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ #endif diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 9b62208658bc..92e6e1a12af8 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index df2cd9277c00..ab4973695c71 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index fdcb1cfd0c35..8b3ef17183e2 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -227,12 +227,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -245,12 +245,12 @@ void __init omap2_set_globals_242x(void) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -263,12 +263,12 @@ void __init omap2_set_globals_243x(void) static struct omap_globals omap343x_globals = { .class = OMAP343X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) @@ -280,10 +280,10 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830a000), - .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), }; void __init omap2_set_globals_443x(void) diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index 826d317cdbec..805819f3a868 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -20,15 +20,18 @@ #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #else -#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 3bad928c6315..2aea5665f58f 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -68,9 +68,9 @@ /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) #elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #endif #if defined(CONFIG_ARCH_OMAP4) #include @@ -104,7 +104,7 @@ .endm #else -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) /* * The interrupt numbering scheme is defined in the diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 8d32df32b0b1..c475be75267e 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -63,9 +63,11 @@ #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) -#define OMAP2_IO_OFFSET 0x90000000 -#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */ +#define OMAP2_L3_IO_OFFSET 0x90000000 +#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ +#define OMAP2_L4_IO_OFFSET 0x90000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 1c09c78a48f2..7b58a5f78ce4 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -80,11 +80,11 @@ */ #define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) #define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) #define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 23a205f4a2b1..eb74ab286081 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -142,7 +142,7 @@ u8 omap_readb(u32 pa) if (cpu_class_is_omap1()) return __raw_readb(OMAP1_IO_ADDRESS(pa)); else - return __raw_readb(OMAP2_IO_ADDRESS(pa)); + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readb); @@ -151,7 +151,7 @@ u16 omap_readw(u32 pa) if (cpu_class_is_omap1()) return __raw_readw(OMAP1_IO_ADDRESS(pa)); else - return __raw_readw(OMAP2_IO_ADDRESS(pa)); + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readw); @@ -160,7 +160,7 @@ u32 omap_readl(u32 pa) if (cpu_class_is_omap1()) return __raw_readl(OMAP1_IO_ADDRESS(pa)); else - return __raw_readl(OMAP2_IO_ADDRESS(pa)); + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readl); @@ -169,7 +169,7 @@ void omap_writeb(u8 v, u32 pa) if (cpu_class_is_omap1()) __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writeb(v, OMAP2_IO_ADDRESS(pa)); + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writeb); @@ -178,7 +178,7 @@ void omap_writew(u16 v, u32 pa) if (cpu_class_is_omap1()) __raw_writew(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writew(v, OMAP2_IO_ADDRESS(pa)); + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writew); @@ -187,6 +187,6 @@ void omap_writel(u32 v, u32 pa) if (cpu_class_is_omap1()) __raw_writel(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writel(v, OMAP2_IO_ADDRESS(pa)); + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 75d1f26e5b17..93bdbaf7b3a4 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -56,16 +56,16 @@ #define SRAM_BOOTLOADER_SZ 0x80 #endif -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048) -#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0) +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) +#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0) #define GP_DEVICE 0x300 -- cgit v1.2.3-58-ga151 From 10db25fea4c11661070b97832b8cc3d2af495092 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 19 Oct 2009 15:25:49 -0700 Subject: omap: Remap L3, L4 to get more kernel io address space This patch remap L3 and L4 io space to get more kernel address space. With this patch, 512 MB of IO space is reclaimed. Some more combinations are possible but to make it uniform across OMAP24XX, OMAP34XX and OMAP4430, these io combinations are chosen Once this is reviewed and tested sufficiently, a documentation entry can be created to ease up reading and debugging. Like "Documentation/arm/omap/io_map.txt" Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/io.h | 97 +++++++++++++++++++------------ arch/arm/plat-omap/include/mach/vmalloc.h | 7 ++- 2 files changed, 64 insertions(+), 40 deletions(-) diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index c475be75267e..a8f931a58f80 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -66,8 +66,18 @@ #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ -#define OMAP2_L4_IO_OFFSET 0x90000000 +#define OMAP4_L3_IO_OFFSET 0xb4000000 +#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ + +#define OMAP4_GPMC_IO_OFFSET 0xa9000000 +#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) + +#define OMAP2_L4_IO_OFFSET 0xb2000000 #define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + +#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ +#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) + /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping @@ -85,24 +95,27 @@ */ /* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ -#define L3_24XX_VIRT 0xf8000000 +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ +#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ -#define L4_24XX_VIRT 0xd8000000 +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ -#define L4_WK_243X_VIRT 0xd9000000 +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ +#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ -#define OMAP243X_GPMC_VIRT 0xFE000000 +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE +#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) + /* 0x6e000000 --> 0xfe000000 */ #define OMAP243X_GPMC_SIZE SZ_1M #define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE -#define OMAP243X_SDRC_VIRT 0xFD000000 + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SDRC_SIZE SZ_1M #define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE -#define OMAP243X_SMS_VIRT 0xFC000000 + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SMS_SIZE SZ_1M /* DSP */ @@ -123,12 +136,12 @@ */ /* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ -#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ +#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ -#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* @@ -136,28 +149,33 @@ * VPOM3430 was not working for Int controller */ -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ -#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ +#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_34XX_SIZE SZ_1M -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ -#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_34XX_SIZE SZ_1M -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ -#define L4_EMU_34XX_VIRT 0xe4000000 -#define L4_EMU_34XX_SIZE SZ_64M +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_34XX_SIZE SZ_8M -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ -#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE + /* 0x6e000000 --> 0xfe000000 */ +#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP34XX_GPMC_SIZE SZ_1M -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ -#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SMS_SIZE SZ_1M -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ -#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SDRC_SIZE SZ_1M /* DSP */ @@ -178,29 +196,32 @@ */ /* We map both L3 and L4 on OMAP4 */ -#define L3_44XX_PHYS L3_44XX_BASE -#define L3_44XX_VIRT 0xd4000000 +#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) #define L3_44XX_SIZE SZ_1M -#define L4_44XX_PHYS L4_44XX_BASE -#define L4_44XX_VIRT 0xda000000 +#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_44XX_SIZE SZ_4M -#define L4_WK_44XX_PHYS L4_WK_44XX_BASE -#define L4_WK_44XX_VIRT 0xda300000 +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ +#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_44XX_SIZE SZ_1M #define L4_PER_44XX_PHYS L4_PER_44XX_BASE -#define L4_PER_44XX_VIRT 0xd8000000 + /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE -#define L4_EMU_44XX_VIRT 0xe4000000 -#define L4_EMU_44XX_SIZE SZ_64M + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_44XX_SIZE SZ_8M #define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE -#define OMAP44XX_GPMC_VIRT 0xe0000000 + /* 0x50000000 --> 0xf9000000 */ +#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) #define OMAP44XX_GPMC_SIZE SZ_1M diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h index b97dfafeebda..fc338a5db769 100644 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ b/arch/arm/plat-omap/include/mach/vmalloc.h @@ -17,5 +17,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) - +#ifdef CONFIG_ARCH_OMAP1 +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#else +#define VMALLOC_END (PAGE_OFFSET + 0x38000000) +#endif -- cgit v1.2.3-58-ga151 From e49b824480bdc2b95764d65ea2ef2176a355fdd4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 19 Oct 2009 17:25:53 -0700 Subject: omap: Move SRAM map to claim more io space This patch moves SRAM map to free up more kernel address io space. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 93bdbaf7b3a4..4144f81de19e 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -41,14 +41,14 @@ #define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PA 0x40200000 #define OMAP2_SRAM_PUB_PA 0x4020f800 -#define OMAP2_SRAM_VA 0xe3000000 +#define OMAP2_SRAM_VA 0xfe400000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xe3000000 +#define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ +#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 -- cgit v1.2.3-58-ga151 From b4224b236b0325ae678fa6b70bd3798dbd93a475 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 19 Oct 2009 17:25:55 -0700 Subject: omap: Fix DEBUG_LL UART io address This patch fixes the low level debug UART io address as per this series. The change is essential to have CONFIG_DEBUG_LL working. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-n8x0.c | 6 +++--- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/board-zoom2.c | 2 +- arch/arm/plat-omap/include/mach/debug-macro.S | 4 ++-- 15 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 42217b32f835..e032a33406a7 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .init_irq = omap_2430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053eba85..364ce7e4c7c3 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -511,7 +511,7 @@ static void __init omap_3430sdp_map_io(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, .init_irq = omap_3430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 1035b22441ba..763055ef4b54 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -93,7 +93,7 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, .init_irq = omap_4430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index a1132288c701..e8a0e56ce2a0 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, .init_irq = omap_apollon_init_irq, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 2e09a1c444cb..1a139c097f66 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index eaa02d012c5c..86f78f3d045a 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, .init_irq = omap_h4_init_irq, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7fdfbd8..4ccc01a1e8c8 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void) MACHINE_START(OMAP_LDP, "OMAP LDP board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, .init_irq = omap_ldp_init_irq, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8341632d260b..2f6ccba5bb3b 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -131,7 +131,7 @@ MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -141,7 +141,7 @@ MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd4..7db803d6c629 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -429,7 +429,7 @@ static void __init omap3_beagle_map_io(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, .init_irq = omap3_beagle_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c591216..72f0b1eef86e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -324,7 +324,7 @@ static void __init omap3_evm_map_io(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, .init_irq = omap3_evm_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf8772af7..12d2381b1b7a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -412,7 +412,7 @@ static void __init omap3pandora_map_io(void) MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, .init_irq = omap3pandora_init_irq, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9917d2fddc2f..c5e0da92e50f 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -451,7 +451,7 @@ static void __init overo_map_io(void) MACHINE_START(OVERO, "Gumstix Overo") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, .init_irq = overo_init_irq, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3b1a7b..c973812d33ab 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -85,7 +85,7 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, .init_irq = rx51_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index fd3369d5e5cb..48bd2af3387e 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void) MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index ac24050e3416..63bb06d43255 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -27,7 +27,7 @@ #elif CONFIG_ARCH_OMAP2 moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 @@ -38,7 +38,7 @@ #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 -- cgit v1.2.3-58-ga151 From f5d2d659450f8e68675124b879e7de82600b77ba Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 19 Oct 2009 17:25:57 -0700 Subject: omap: Add OMAP4 L3 and L4 peripherals. This patch adds few necessary peripherals for OMAP4. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 18 ++++++++++++++++++ arch/arm/plat-omap/include/mach/io.h | 29 ++++++++++++++++++++++++++--- arch/arm/plat-omap/include/mach/omap44xx.h | 3 +++ arch/arm/plat-omap/io.c | 8 ++++++++ 4 files changed, 55 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad1d84f..fc629532db62 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -202,6 +202,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .length = OMAP44XX_GPMC_SIZE, .type = MT_DEVICE, }, + { + .virtual = OMAP44XX_EMIF1_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), + .length = OMAP44XX_EMIF1_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_EMIF2_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), + .length = OMAP44XX_EMIF2_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_DMM_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), + .length = OMAP44XX_DMM_SIZE, + .type = MT_DEVICE, + }, { .virtual = L4_PER_44XX_VIRT, .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index a8f931a58f80..7e5319f907d1 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -66,15 +66,19 @@ #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + #define OMAP4_GPMC_IO_OFFSET 0xa9000000 #define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ - #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ #define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) @@ -214,6 +218,11 @@ #define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE /* 0x54000000 --> 0xfe800000 */ #define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) @@ -225,6 +234,20 @@ #define OMAP44XX_GPMC_SIZE SZ_1M +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h index 8b4a57875dab..336189753671 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -22,6 +22,9 @@ #define L4_PER_44XX_BASE 0x48000000 #define L4_EMU_44XX_BASE 0x54000000 #define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 #define OMAP4430_CM_BASE 0x4a004000 #define OMAP4430_PRM_BASE 0x48306000 diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index eb74ab286081..93c1d53eb918 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) + return XLATE(p, OMAP44XX_EMIF1_PHYS, \ + OMAP44XX_EMIF1_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) + return XLATE(p, OMAP44XX_EMIF2_PHYS, \ + OMAP44XX_EMIF2_VIRT); + if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) + return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) -- cgit v1.2.3-58-ga151 From 74cda9a5192e68a38720c8130160e7b3577098d4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:26:07 -0700 Subject: omap: headers: Add mach path to include files This is to prepare for moving hardware.h to live under plat instead of mach. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/hardware.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 99c42412c0a1..b3b713dc4b59 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -280,11 +280,11 @@ * --------------------------------------------------------------------------- */ -#include "omap7xx.h" -#include "omap1510.h" -#include "omap16xx.h" -#include "omap24xx.h" -#include "omap34xx.h" -#include "omap44xx.h" +#include +#include +#include +#include +#include +#include #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ -- cgit v1.2.3-58-ga151 From aca59b8922ad32e0555f78f99bcb31b5e24abe36 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:26:17 -0700 Subject: omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2 This also creates the include/mach subdirectories under mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/debug-macro.S | 45 +++++++++++++++++ arch/arm/mach-omap2/include/mach/debug-macro.S | 59 ++++++++++++++++++++++ arch/arm/plat-omap/include/mach/debug-macro.S | 70 -------------------------- 3 files changed, 104 insertions(+), 70 deletions(-) create mode 100644 arch/arm/mach-omap1/include/mach/debug-macro.S create mode 100644 arch/arm/mach-omap2/include/mach/debug-macro.S delete mode 100644 arch/arm/plat-omap/include/mach/debug-macro.S diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S new file mode 100644 index 000000000000..aedb746fc33c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -0,0 +1,45 @@ +/* arch/arm/mach-omap1/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + orr \rx, \rx, #0x00009000 @ UART 3 +#endif +#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) + orr \rx, \rx, #0x00000800 @ UART 2 & 3 +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S new file mode 100644 index 000000000000..e9f255df9163 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -0,0 +1,59 @@ +/* arch/arm/mach-omap2/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? +#ifdef CONFIG_ARCH_OMAP2 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xfa000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00004000 @ UART 3 +#endif + +#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xfa000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00fb0000 @ UART 3 + add \rx, \rx, #0x00006000 +#endif +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S deleted file mode 100644 index 63bb06d43255..000000000000 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/plat-omap/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? -#ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xfa000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00004000 @ UART 3 -#endif - -#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xfa000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00fb0000 @ UART 3 - add \rx, \rx, #0x00006000 -#endif -#endif - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends - and \rd, \rd, #0x60 - teq \rd, #0x60 - beq 1002f - ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1001b -1002: - .endm - - .macro waituart,rd,rx - .endm -- cgit v1.2.3-58-ga151 From c97c686467420f6765c7bc5bdae2b2aca141068b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:26:19 -0700 Subject: omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2 Split entry-macro.S for mach-omap1 and mach-omap2 Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/entry-macro.S | 58 +++++++++ arch/arm/mach-omap2/include/mach/entry-macro.S | 124 ++++++++++++++++++ arch/arm/plat-omap/include/mach/entry-macro.S | 174 ------------------------- 3 files changed, 182 insertions(+), 174 deletions(-) create mode 100644 arch/arm/mach-omap1/include/mach/entry-macro.S create mode 100644 arch/arm/mach-omap2/include/mach/entry-macro.S delete mode 100644 arch/arm/plat-omap/include/mach/entry-macro.S diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S new file mode 100644 index 000000000000..df9060edda28 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-omap1/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * Copyright (C) 2009 Texas Instruments + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include + +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +#define INT_IH2_IRQ INT_7XX_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP15XX) +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP16XX) +#define INT_IH2_IRQ INT_1610_IH2_IRQ +#else +#warning "IH2 IRQ defaulted" +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#endif + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) + ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] + ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] + mov \irqstat, #0xffffffff + bic \tmp, \irqstat, \tmp + tst \irqnr, \tmp + beq 1510f + + ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + cmp \irqnr, #0 + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + cmpeq \irqnr, #INT_IH2_IRQ + ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + addeqs \irqnr, \irqnr, #32 +1510: + .endm + diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S new file mode 100644 index 000000000000..6149d34a9cd2 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -0,0 +1,124 @@ +/* + * arch/arm/plat-omap/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include + +#include +#include + +/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ +#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) +#elif defined(CONFIG_ARCH_OMAP34XX) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) +#endif +#if defined(CONFIG_ARCH_OMAP4) +#include +#endif +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +#ifndef CONFIG_ARCH_OMAP4 + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP2_VA_IC_BASE + ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ + cmp \irqnr, #0x0 +2222: + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] + and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ + + .endm +#else +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an + * interrupt if it's between 30 and 1020. The test_for_ipi + * routine below will pick up on IPIs. + * A simple read from the controller will tell us the number + * of the highest priority enabled interrupt. + * We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP44XX_VA_GIC_CPU_BASE + ldr \irqstat, [\base, #GIC_CPU_INTACK] + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt + * on the controller, since this requires the original irqstat + * value which we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + it cc + strcc \irqstat, [\base, #GIC_CPU_EOI] + it cs + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + itt eq + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif + + .macro irq_prio_table + .endm diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S deleted file mode 100644 index 2aea5665f58f..000000000000 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ /dev/null @@ -1,174 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for OMAP-based platforms - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include - -#if defined(CONFIG_ARCH_OMAP1) - -#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP7XX doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -#define INT_IH2_IRQ INT_7XX_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#endif - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - -#endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - -#include -#include - -/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ -#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) -#elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#endif -#if defined(CONFIG_ARCH_OMAP4) -#include -#endif -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ -#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#ifndef CONFIG_ARCH_OMAP4 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP2_VA_IC_BASE - ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ - cmp \irqnr, #0x0 -2222: - ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] - and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ - - .endm -#else -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an - * interrupt if it's between 30 and 1020. The test_for_ipi - * routine below will pick up on IPIs. - * A simple read from the controller will tell us the number - * of the highest priority enabled interrupt. - * We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP44XX_VA_GIC_CPU_BASE - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt - * on the controller, since this requires the original irqstat - * value which we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - it cc - strcc \irqstat, [\base, #GIC_CPU_EOI] - it cs - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - itt eq - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm -#endif - - .macro irq_prio_table - .endm - -#endif -- cgit v1.2.3-58-ga151 From 72464dbae2749dd57bc2b3cd57d4fc6ba7abca37 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:26:29 -0700 Subject: omap: Split vmalloc.h for mach-omap1 and mach-omap2 Earlier patch "omap: Remap L3, L4 to get more kernel io address space" changed the VMALLOC_END. However, this change causes problems on mach-omap1: BUG: mapping for 0xe0000000 at 0xe0000000 overlaps vmalloc space BUG: mapping for 0xe1000000 at 0xe1000000 overlaps vmalloc space Fix this by creating separate vmalloc.h files for mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/vmalloc.h | 20 ++++++++++++++++++++ arch/arm/mach-omap2/include/mach/vmalloc.h | 20 ++++++++++++++++++++ arch/arm/plat-omap/include/mach/vmalloc.h | 24 ------------------------ 3 files changed, 40 insertions(+), 24 deletions(-) create mode 100644 arch/arm/mach-omap1/include/mach/vmalloc.h create mode 100644 arch/arm/mach-omap2/include/mach/vmalloc.h delete mode 100644 arch/arm/plat-omap/include/mach/vmalloc.h diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h new file mode 100644 index 000000000000..1b2af14df151 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-omap1/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h new file mode 100644 index 000000000000..9ce9b6e8ad23 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-omap/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x38000000) diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h deleted file mode 100644 index fc338a5db769..000000000000 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifdef CONFIG_ARCH_OMAP1 -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) -#else -#define VMALLOC_END (PAGE_OFFSET + 0x38000000) -#endif -- cgit v1.2.3-58-ga151 From 1e79ab8a45b71d3d08eb6cdac44b66229dcea03e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:32:55 -0700 Subject: omap: headers: Move mtd-xip.h to be mach-omap1 specific These registers are omap1 specific. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/mtd-xip.h | 61 ++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/mtd-xip.h | 61 ------------------------------ 2 files changed, 61 insertions(+), 61 deletions(-) create mode 100644 arch/arm/mach-omap1/include/mach/mtd-xip.h delete mode 100644 arch/arm/plat-omap/include/mach/mtd-xip.h diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h new file mode 100644 index 000000000000..f82a8dcaad94 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h @@ -0,0 +1,61 @@ +/* + * MTD primitives for XIP support. Architecture specific functions. + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Vladimir Barinov + * + * (c) 2005 MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express or + * implied. + */ + +#ifndef __ARCH_OMAP_MTD_XIP_H__ +#define __ARCH_OMAP_MTD_XIP_H__ + +#include +#define OMAP_MPU_TIMER_BASE (0xfffec500) +#define OMAP_MPU_TIMER_OFFSET 0x100 + +typedef struct { + u32 cntl; /* CNTL_TIMER, R/W */ + u32 load_tim; /* LOAD_TIM, W */ + u32 read_tim; /* READ_TIM, R */ +} xip_omap_mpu_timer_regs_t; + +#define xip_omap_mpu_timer_base(n) \ +((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ + (n)*OMAP_MPU_TIMER_OFFSET)) + +static inline unsigned long xip_omap_mpu_timer_read(int nr) +{ + volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); + return timer->read_tim; +} + +#define xip_irqpending() \ + (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) +#define xip_currtime() (~xip_omap_mpu_timer_read(0)) + +/* + * It's permitted to do approxmation for xip_elapsed_since macro + * (see linux/mtd/xip.h) + */ + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) +#else +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) +#endif + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) + +#endif /* __ARCH_OMAP_MTD_XIP_H__ */ diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h deleted file mode 100644 index f82a8dcaad94..000000000000 --- a/arch/arm/plat-omap/include/mach/mtd-xip.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions. - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Vladimir Barinov - * - * (c) 2005 MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express or - * implied. - */ - -#ifndef __ARCH_OMAP_MTD_XIP_H__ -#define __ARCH_OMAP_MTD_XIP_H__ - -#include -#define OMAP_MPU_TIMER_BASE (0xfffec500) -#define OMAP_MPU_TIMER_OFFSET 0x100 - -typedef struct { - u32 cntl; /* CNTL_TIMER, R/W */ - u32 load_tim; /* LOAD_TIM, W */ - u32 read_tim; /* READ_TIM, R */ -} xip_omap_mpu_timer_regs_t; - -#define xip_omap_mpu_timer_base(n) \ -((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ - (n)*OMAP_MPU_TIMER_OFFSET)) - -static inline unsigned long xip_omap_mpu_timer_read(int nr) -{ - volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); - return timer->read_tim; -} - -#define xip_irqpending() \ - (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) -#define xip_currtime() (~xip_omap_mpu_timer_read(0)) - -/* - * It's permitted to do approxmation for xip_elapsed_since macro - * (see linux/mtd/xip.h) - */ - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) -#else -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) -#endif - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) - -#endif /* __ARCH_OMAP_MTD_XIP_H__ */ -- cgit v1.2.3-58-ga151 From 3eff851b9dc1e84aa0822772e0be9afb0c973585 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 Oct 2009 17:32:58 -0700 Subject: omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2 Create the headers needed for compiling under mach-omap1/include/mach and mach-omap2/include/mach. This was done with the following script: #!/bin/bash mach_files="clkdev.h gpio.h hardware.h io.h irqs.h memory.h \ smp.h system.h timex.h uncompress.h vmalloc.h" omaps="mach-omap1 mach-omap2" mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" mkdir -p $plat_dir_new git add $plat_dir_new for dir in $omaps; do mach_dir_new="arch/arm/$dir/include/mach" for header in $mach_files; do file="$mach_dir_new/$header" if [ ! -f $file ]; then echo -ne "/*\n * $file\n */\n\n#include \n" > $file git add $file if [ ! -f $plat_dir_new/$header ]; then git mv $mach_dir_old/$header $plat_dir_new/$header fi fi done done Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/clkdev.h | 5 + arch/arm/mach-omap1/include/mach/gpio.h | 5 + arch/arm/mach-omap1/include/mach/hardware.h | 5 + arch/arm/mach-omap1/include/mach/io.h | 5 + arch/arm/mach-omap1/include/mach/irqs.h | 5 + arch/arm/mach-omap1/include/mach/memory.h | 5 + arch/arm/mach-omap1/include/mach/smp.h | 5 + arch/arm/mach-omap1/include/mach/system.h | 5 + arch/arm/mach-omap1/include/mach/timex.h | 5 + arch/arm/mach-omap1/include/mach/uncompress.h | 5 + arch/arm/mach-omap2/include/mach/clkdev.h | 5 + arch/arm/mach-omap2/include/mach/gpio.h | 5 + arch/arm/mach-omap2/include/mach/hardware.h | 5 + arch/arm/mach-omap2/include/mach/io.h | 5 + arch/arm/mach-omap2/include/mach/irqs.h | 5 + arch/arm/mach-omap2/include/mach/memory.h | 5 + arch/arm/mach-omap2/include/mach/smp.h | 5 + arch/arm/mach-omap2/include/mach/system.h | 5 + arch/arm/mach-omap2/include/mach/timex.h | 5 + arch/arm/mach-omap2/include/mach/uncompress.h | 5 + arch/arm/plat-omap/include/mach/clkdev.h | 13 - arch/arm/plat-omap/include/mach/gpio.h | 128 ------- arch/arm/plat-omap/include/mach/hardware.h | 290 --------------- arch/arm/plat-omap/include/mach/io.h | 287 --------------- arch/arm/plat-omap/include/mach/irqs.h | 487 -------------------------- arch/arm/plat-omap/include/mach/memory.h | 96 ----- arch/arm/plat-omap/include/mach/smp.h | 51 --- arch/arm/plat-omap/include/mach/system.h | 51 --- arch/arm/plat-omap/include/mach/timex.h | 41 --- arch/arm/plat-omap/include/mach/uncompress.h | 84 ----- arch/arm/plat-omap/include/plat/clkdev.h | 13 + arch/arm/plat-omap/include/plat/gpio.h | 128 +++++++ arch/arm/plat-omap/include/plat/hardware.h | 290 +++++++++++++++ arch/arm/plat-omap/include/plat/io.h | 287 +++++++++++++++ arch/arm/plat-omap/include/plat/irqs.h | 487 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/memory.h | 96 +++++ arch/arm/plat-omap/include/plat/smp.h | 51 +++ arch/arm/plat-omap/include/plat/system.h | 51 +++ arch/arm/plat-omap/include/plat/timex.h | 41 +++ arch/arm/plat-omap/include/plat/uncompress.h | 84 +++++ 40 files changed, 1628 insertions(+), 1528 deletions(-) create mode 100644 arch/arm/mach-omap1/include/mach/clkdev.h create mode 100644 arch/arm/mach-omap1/include/mach/gpio.h create mode 100644 arch/arm/mach-omap1/include/mach/hardware.h create mode 100644 arch/arm/mach-omap1/include/mach/io.h create mode 100644 arch/arm/mach-omap1/include/mach/irqs.h create mode 100644 arch/arm/mach-omap1/include/mach/memory.h create mode 100644 arch/arm/mach-omap1/include/mach/smp.h create mode 100644 arch/arm/mach-omap1/include/mach/system.h create mode 100644 arch/arm/mach-omap1/include/mach/timex.h create mode 100644 arch/arm/mach-omap1/include/mach/uncompress.h create mode 100644 arch/arm/mach-omap2/include/mach/clkdev.h create mode 100644 arch/arm/mach-omap2/include/mach/gpio.h create mode 100644 arch/arm/mach-omap2/include/mach/hardware.h create mode 100644 arch/arm/mach-omap2/include/mach/io.h create mode 100644 arch/arm/mach-omap2/include/mach/irqs.h create mode 100644 arch/arm/mach-omap2/include/mach/memory.h create mode 100644 arch/arm/mach-omap2/include/mach/smp.h create mode 100644 arch/arm/mach-omap2/include/mach/system.h create mode 100644 arch/arm/mach-omap2/include/mach/timex.h create mode 100644 arch/arm/mach-omap2/include/mach/uncompress.h delete mode 100644 arch/arm/plat-omap/include/mach/clkdev.h delete mode 100644 arch/arm/plat-omap/include/mach/gpio.h delete mode 100644 arch/arm/plat-omap/include/mach/hardware.h delete mode 100644 arch/arm/plat-omap/include/mach/io.h delete mode 100644 arch/arm/plat-omap/include/mach/irqs.h delete mode 100644 arch/arm/plat-omap/include/mach/memory.h delete mode 100644 arch/arm/plat-omap/include/mach/smp.h delete mode 100644 arch/arm/plat-omap/include/mach/system.h delete mode 100644 arch/arm/plat-omap/include/mach/timex.h delete mode 100644 arch/arm/plat-omap/include/mach/uncompress.h create mode 100644 arch/arm/plat-omap/include/plat/clkdev.h create mode 100644 arch/arm/plat-omap/include/plat/gpio.h create mode 100644 arch/arm/plat-omap/include/plat/hardware.h create mode 100644 arch/arm/plat-omap/include/plat/io.h create mode 100644 arch/arm/plat-omap/include/plat/irqs.h create mode 100644 arch/arm/plat-omap/include/plat/memory.h create mode 100644 arch/arm/plat-omap/include/plat/smp.h create mode 100644 arch/arm/plat-omap/include/plat/system.h create mode 100644 arch/arm/plat-omap/include/plat/timex.h create mode 100644 arch/arm/plat-omap/include/plat/uncompress.h diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h new file mode 100644 index 000000000000..ea8640e4603e --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/clkdev.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h new file mode 100644 index 000000000000..e737706a8fe1 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/gpio.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h new file mode 100644 index 000000000000..a3f6287b2007 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/hardware.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h new file mode 100644 index 000000000000..57bdf74a3e64 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/io.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h new file mode 100644 index 000000000000..9292fdc1cb0b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/irqs.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h new file mode 100644 index 000000000000..e9b600c113ef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/memory.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h new file mode 100644 index 000000000000..80a371c06e59 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/smp.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h new file mode 100644 index 000000000000..a6c1b3a16dfc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/system.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h new file mode 100644 index 000000000000..4793790d53cc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/timex.h + */ + +#include diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h new file mode 100644 index 000000000000..0ff22dc075c7 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/uncompress.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h new file mode 100644 index 000000000000..53b027441c56 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/clkdev.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h new file mode 100644 index 000000000000..be4d290d57ee --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/gpio.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h new file mode 100644 index 000000000000..78edf9d33f71 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/hardware.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h new file mode 100644 index 000000000000..fd78f31aa1ad --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/io.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h new file mode 100644 index 000000000000..44dab7725696 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/irqs.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h new file mode 100644 index 000000000000..ca6d32a917dd --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/memory.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h new file mode 100644 index 000000000000..323675f21b69 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/smp.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h new file mode 100644 index 000000000000..d488721ab90b --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/system.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h new file mode 100644 index 000000000000..de9f8fc40e7c --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/timex.h + */ + +#include diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h new file mode 100644 index 000000000000..78e0557bfd4e --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/uncompress.h + */ + +#include diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h deleted file mode 100644 index 730c49d1ebd8..000000000000 --- a/arch/arm/plat-omap/include/mach/clkdev.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -static inline int __clk_get(struct clk *clk) -{ - return 1; -} - -static inline void __clk_put(struct clk *clk) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h deleted file mode 100644 index 633ff688b928..000000000000 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include -#include - -#define OMAP1_MPUIO_BASE 0xfffb5000 - -#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) - -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x02 -#define OMAP_MPUIO_IO_CNTL 0x04 -#define OMAP_MPUIO_KBR_LATCH 0x08 -#define OMAP_MPUIO_KBC 0x0a -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c -#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e -#define OMAP_MPUIO_KBD_INT 0x10 -#define OMAP_MPUIO_GPIO_INT 0x12 -#define OMAP_MPUIO_KBD_MASKIT 0x14 -#define OMAP_MPUIO_GPIO_MASKIT 0x16 -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 -#define OMAP_MPUIO_LATCH 0x1a -#else -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 -#endif - -#define OMAP34XX_NR_GPIOS 6 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ - IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + (nr)) - -extern int omap_gpio_init(void); /* Call from board init only */ -extern void omap2_gpio_prepare_for_retention(void); -extern void omap2_gpio_resume_after_retention(void); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * * - * The original OMAP-specfic calls should eventually be removed. - */ - -#include -#include - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return __gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - int tmp; - - /* omap1 SOC mpuio */ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - - /* SOC gpio */ - tmp = irq - IH_GPIO_BASE; - if (tmp < OMAP_MAX_GPIO_LINES) - return tmp; - - /* we don't supply reverse mappings for non-SOC gpios */ - return -EIO; -} - -#endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h deleted file mode 100644 index b3b713dc4b59..000000000000 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon - * - * Reorganized for Linux-2.6 by Tony Lindgren - * and Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include -#ifndef __ASSEMBLER__ -#include -#include -#endif -#include - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include -#include -#include -#include -#include -#include - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h deleted file mode 100644 index 7e5319f907d1..000000000000 --- a/arch/arm/plat-omap/include/mach/io.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ - -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - -#define OMAP2_L3_IO_OFFSET 0x90000000 -#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ - - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ - -#define OMAP4_L3_IO_OFFSET 0xb4000000 -#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ - -#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 -#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) - -#define OMAP4_GPMC_IO_OFFSET 0xa9000000 -#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) - -#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ -#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- - * Omap1 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -#define OMAP1_IO_PHYS 0xFFFB0000 -#define OMAP1_IO_SIZE 0x40000 -#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- - * Omap2 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ -#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) -#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ -#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ - -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ -#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE -#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) - /* 0x6e000000 --> 0xfe000000 */ -#define OMAP243X_GPMC_SIZE SZ_1M -#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE - /* 0x6D000000 --> 0xfd000000 */ -#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP243X_SDRC_SIZE SZ_1M -#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE - /* 0x6c000000 --> 0xfc000000 */ -#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP243X_SMS_SIZE SZ_1M - -/* DSP */ -#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_24XX_VIRT 0xe0000000 -#define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_24XX_VIRT 0xe1000000 -#define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_24XX_VIRT 0xe2000000 -#define DSP_MMU_24XX_SIZE SZ_4K - -/* - * ---------------------------------------------------------------------------- - * Omap3 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ -#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) -#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ - -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ -#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ - -/* - * Need to look at the Size 4M for L4. - * VPOM3430 was not working for Int controller - */ - -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ -#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_WK_34XX_SIZE SZ_1M - -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE - /* 0x49000000 --> 0xfb000000 */ -#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_PER_34XX_SIZE SZ_1M - -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE - /* 0x54000000 --> 0xfe800000 */ -#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) -#define L4_EMU_34XX_SIZE SZ_8M - -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE - /* 0x6e000000 --> 0xfe000000 */ -#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP34XX_GPMC_SIZE SZ_1M - -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE - /* 0x6c000000 --> 0xfc000000 */ -#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP343X_SMS_SIZE SZ_1M - -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE - /* 0x6D000000 --> 0xfd000000 */ -#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP343X_SDRC_SIZE SZ_1M - -/* DSP */ -#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_34XX_VIRT 0xe0000000 -#define DSP_MEM_34XX_SIZE 0x28000 -#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_34XX_VIRT 0xe1000000 -#define DSP_IPI_34XX_SIZE SZ_4K -#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_34XX_VIRT 0xe2000000 -#define DSP_MMU_34XX_SIZE SZ_4K - -/* - * ---------------------------------------------------------------------------- - * Omap4 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP4 */ -#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ -#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) -#define L3_44XX_SIZE SZ_1M - -#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ -#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_44XX_SIZE SZ_4M - - -#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ -#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_WK_44XX_SIZE SZ_1M - -#define L4_PER_44XX_PHYS L4_PER_44XX_BASE - /* 0x48000000 --> 0xfa000000 */ -#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_PER_44XX_SIZE SZ_4M - -#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE - /* 0x49000000 --> 0xfb000000 */ -#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_ABE_44XX_SIZE SZ_1M - -#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE - /* 0x54000000 --> 0xfe800000 */ -#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) -#define L4_EMU_44XX_SIZE SZ_8M - -#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE - /* 0x50000000 --> 0xf9000000 */ -#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) -#define OMAP44XX_GPMC_SIZE SZ_1M - - -#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE - /* 0x4c000000 --> 0xfd100000 */ -#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) -#define OMAP44XX_EMIF1_SIZE SZ_1M - -#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE - /* 0x4d000000 --> 0xfd200000 */ -#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) -#define OMAP44XX_EMIF2_SIZE SZ_1M - -#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE - /* 0x4e000000 --> 0xfd300000 */ -#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) -#define OMAP44XX_DMM_SIZE SZ_1M -/* - * ---------------------------------------------------------------------------- - * Omap specific register access - * ---------------------------------------------------------------------------- - */ - -#ifndef __ASSEMBLER__ - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -extern u8 omap_readb(u32 pa); -extern u16 omap_readw(u32 pa); -extern u32 omap_readl(u32 pa); -extern void omap_writeb(u8 v, u32 pa); -extern void omap_writew(u16 v, u32 pa); -extern void omap_writel(u32 v, u32 pa); - -struct omap_sdrc_params; - -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); - -extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); - -#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) -#define __arch_iounmap(v) omap_iounmap(v) - -void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); -void omap_iounmap(volatile void __iomem *addr); - -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h deleted file mode 100644 index 6a6d0281e1d5..000000000000 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ /dev/null @@ -1,487 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ 0 -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_SHA1MD5 51 -#define INT_24XX_MCBSP4_IRQ_TX 54 -#define INT_24XX_MCBSP4_IRQ_RX 55 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_HDQ_IRQ 58 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_SPI1_IRQ 65 -#define INT_24XX_SPI2_IRQ 66 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MCBSP5_IRQ_TX 81 -#define INT_24XX_MCBSP5_IRQ_RX 82 -#define INT_24XX_MMC_IRQ 83 -#define INT_24XX_MMC2_IRQ 86 -#define INT_24XX_MCBSP3_IRQ_TX 89 -#define INT_24XX_MCBSP3_IRQ_RX 90 -#define INT_24XX_SPI3_IRQ 91 - -#define INT_243X_MCBSP2_IRQ 16 -#define INT_243X_MCBSP3_IRQ 17 -#define INT_243X_MCBSP4_IRQ 18 -#define INT_243X_MCBSP5_IRQ 19 -#define INT_243X_MCBSP1_IRQ 64 -#define INT_243X_HS_USB_MC 92 -#define INT_243X_HS_USB_DMA 93 -#define INT_243X_CARKIT_IRQ 94 - -#define INT_34XX_BENCH_MPU_EMUL 3 -#define INT_34XX_ST_MCBSP2_IRQ 4 -#define INT_34XX_ST_MCBSP3_IRQ 5 -#define INT_34XX_SSM_ABORT_IRQ 6 -#define INT_34XX_SYS_NIRQ 7 -#define INT_34XX_D2D_FW_IRQ 8 -#define INT_34XX_PRCM_MPU_IRQ 11 -#define INT_34XX_MCBSP1_IRQ 16 -#define INT_34XX_MCBSP2_IRQ 17 -#define INT_34XX_MCBSP3_IRQ 22 -#define INT_34XX_MCBSP4_IRQ 23 -#define INT_34XX_CAM_IRQ 24 -#define INT_34XX_MCBSP5_IRQ 27 -#define INT_34XX_GPIO_BANK1 29 -#define INT_34XX_GPIO_BANK2 30 -#define INT_34XX_GPIO_BANK3 31 -#define INT_34XX_GPIO_BANK4 32 -#define INT_34XX_GPIO_BANK5 33 -#define INT_34XX_GPIO_BANK6 34 -#define INT_34XX_USIM_IRQ 35 -#define INT_34XX_WDT3_IRQ 36 -#define INT_34XX_SPI4_IRQ 48 -#define INT_34XX_SHA1MD52_IRQ 49 -#define INT_34XX_FPKA_READY_IRQ 50 -#define INT_34XX_SHA1MD51_IRQ 51 -#define INT_34XX_RNG_IRQ 52 -#define INT_34XX_I2C3_IRQ 61 -#define INT_34XX_FPKA_ERROR_IRQ 64 -#define INT_34XX_PBIAS_IRQ 75 -#define INT_34XX_OHCI_IRQ 76 -#define INT_34XX_EHCI_IRQ 77 -#define INT_34XX_TLL_IRQ 78 -#define INT_34XX_PARTHASH_IRQ 79 -#define INT_34XX_MMC3_IRQ 94 -#define INT_34XX_GPT12_IRQ 95 - -#define INT_34XX_BENCH_MPU_EMUL 3 - - -#define IRQ_GIC_START 32 -#define INT_44XX_LOCALTIMER_IRQ 29 -#define INT_44XX_LOCALWDT_IRQ 30 - -#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START) -#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START) -#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START) -#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START) -#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START) -#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START) -#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START) -#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START) -#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START) -#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START) -#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START) -#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START) -#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START) -#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START) -#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START) -#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START) -#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START) -#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START) -#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START) -#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START) -#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START) -#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START) -#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START) -#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START) -#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START) -#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START) -#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START) -#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START) -#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START) -#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START) -#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START) -#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START) -#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START) -#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START) -#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START) -#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START) -#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START) -#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START) -#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START) -#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START) -#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START) -#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START) -#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START) -#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START) -#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START) -#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START) -#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START) -#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START) -#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START) -#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START) -#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START) - -#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START) -#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START) -#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START) -#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START) -#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START) -#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START) -#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START) - -#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START) -#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START) -#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START) -#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START) -#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START) -#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START) -#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START) -#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START) -#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START) -#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START) -#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START) -#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START) -#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START) -#define INT_44XX_MMC5_IRQ (59 + IRQ_GIC_START) -#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START) -#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START) -#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START) -#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START) -#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START) -#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START) -#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START) -#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START) -#define INT_44XX_MMC4_IRQ (96 + IRQ_GIC_START) - - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_GPIO_TWL4030 -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#define NR_IRQS TWL4030_GPIO_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#ifndef __ASSEMBLY__ -extern void omap_init_irq(void); -extern int omap_irq_pending(void); -#endif - -#include - -#endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h deleted file mode 100644 index 9ad41dc484c1..000000000000 --- a/arch/arm/plat-omap/include/mach/memory.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) -#define PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) - -#define __arch_page_to_dma(dev, page) \ - ({ dma_addr_t __dma = page_to_phys(page); \ - if (is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ - __dma; }) - -#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __phys_to_virt(addr)); }) - -#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ - (dma_addr_t) (is_lbus_device(dev) ? \ - virt_to_lbus(__addr) : \ - __virt_to_phys(__addr)); }) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h deleted file mode 100644 index dcaa8fde7063..000000000000 --- a/arch/arm/plat-omap/include/mach/smp.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * OMAP4 machine specific smp.h - * - * Copyright (C) 2009 Texas Instruments, Inc. - * - * Author: - * Santosh Shilimkar - * - * Interface functions needed for the SMP. This file is based on arm - * realview smp platform. - * Copyright (c) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef OMAP_ARCH_SMP_H -#define OMAP_ARCH_SMP_H - -#include - -/* - * set_event() is used to wake up secondary core from wfe using sev. ROM - * code puts the second core into wfe(standby). - * - */ -#define set_event() __asm__ __volatile__ ("sev" : : : "memory") - -/* Needed for secondary core boot */ -extern void omap_secondary_startup(void); - -/* - * We use Soft IRQ1 as the IPI - */ -static inline void smp_cross_call(const struct cpumask *mask) -{ - gic_raise_softirq(mask, 1); -} - -/* - * Read MPIDR: Multiprocessor affinity register - */ -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - -#endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h deleted file mode 100644 index ed8ec7477261..000000000000 --- a/arch/arm/plat-omap/include/mach/system.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include - -#include -#include - -#include - -#ifndef CONFIG_MACH_VOICEBLUE -#define voiceblue_reset() do {} while (0) -#else -extern void voiceblue_reset(void); -#endif - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void omap1_arch_reset(char mode) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), - DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - if (machine_is_voiceblue()) - voiceblue_reset(); - else - omap_writew(1, ARM_RSTCT1); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - if (!cpu_class_is_omap2()) - omap1_arch_reset(mode); - else - omap_prcm_arch_reset(mode); -} - -#endif diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h deleted file mode 100644 index 6d35767bc48f..000000000000 --- a/arch/arm/plat-omap/include/mach/timex.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -/* - * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, - * and that's why the CLOCK_TICK_RATE is not 32768. - */ -#ifdef CONFIG_OMAP_32K_TIMER -#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) -#else -#define CLOCK_TICK_RATE (HZ * 100000UL) -#endif - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h deleted file mode 100644 index ddf7b88dec4d..000000000000 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Rewritten by: - * Author: - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -unsigned int system_rev; - -#define UART_OMAP_MDR1 0x08 /* mode definition register */ -#define OMAP_ID_730 0x355F -#define OMAP_ID_850 0x362C -#define ID_MASK 0x7fff -#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) -#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK - -static void putc(int c) -{ - volatile u8 * uart = 0; - int shift = 2; - -#ifdef CONFIG_MACH_OMAP_PALMTE - return; -#endif - -#ifdef CONFIG_ARCH_OMAP -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - uart = (volatile u8 *)(OMAP_UART3_BASE); -#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) - uart = (volatile u8 *)(OMAP_UART2_BASE); -#else - uart = (volatile u8 *)(OMAP_UART1_BASE); -#endif - -#ifdef CONFIG_ARCH_OMAP1 - /* Determine which serial port to use */ - do { - /* MMU is not on, so cpu_is_omapXXXX() won't work here */ - unsigned int omap_id = omap_get_id(); - - if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) - shift = 0; - - if (check_port(uart, shift)) - break; - /* Silent boot if no serial ports are enabled. */ - return; - } while (0); -#endif /* CONFIG_ARCH_OMAP1 */ -#endif - - /* - * Now, xmit each character - */ - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/plat/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h new file mode 100644 index 000000000000..730c49d1ebd8 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h new file mode 100644 index 000000000000..633ff688b928 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -0,0 +1,128 @@ +/* + * arch/arm/plat-omap/include/mach/gpio.h + * + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003-2005 Nokia Corporation + * + * Written by Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include +#include + +#define OMAP1_MPUIO_BASE 0xfffb5000 + +#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) + +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x02 +#define OMAP_MPUIO_IO_CNTL 0x04 +#define OMAP_MPUIO_KBR_LATCH 0x08 +#define OMAP_MPUIO_KBC 0x0a +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c +#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e +#define OMAP_MPUIO_KBD_INT 0x10 +#define OMAP_MPUIO_GPIO_INT 0x12 +#define OMAP_MPUIO_KBD_MASKIT 0x14 +#define OMAP_MPUIO_GPIO_MASKIT 0x16 +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 +#define OMAP_MPUIO_LATCH 0x1a +#else +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 +#endif + +#define OMAP34XX_NR_GPIOS 6 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ + IH_MPUIO_BASE + ((nr) & 0x0f) : \ + IH_GPIO_BASE + (nr)) + +extern int omap_gpio_init(void); /* Call from board init only */ +extern void omap2_gpio_prepare_for_retention(void); +extern void omap2_gpio_resume_after_retention(void); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); + +/*-------------------------------------------------------------------------*/ + +/* Wrappers for "new style" GPIO calls, using the new infrastructure + * which lets us plug in FPGA, I2C, and other implementations. + * * + * The original OMAP-specfic calls should eventually be removed. + */ + +#include +#include + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return __gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + int tmp; + + /* omap1 SOC mpuio */ + if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) + return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; + + /* SOC gpio */ + tmp = irq - IH_GPIO_BASE; + if (tmp < OMAP_MAX_GPIO_LINES) + return tmp; + + /* we don't supply reverse mappings for non-SOC gpios */ + return -EIO; +} + +#endif diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h new file mode 100644 index 000000000000..b3b713dc4b59 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -0,0 +1,290 @@ +/* + * arch/arm/plat-omap/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon + * + * Reorganized for Linux-2.6 by Tony Lindgren + * and Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H + +#include +#ifndef __ASSEMBLER__ +#include +#include +#endif +#include + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + +#endif + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include +#include +#include +#include +#include +#include + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h new file mode 100644 index 000000000000..7e5319f907d1 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/io.h @@ -0,0 +1,287 @@ +/* + * arch/arm/plat-omap/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +/* + * ---------------------------------------------------------------------------- + * I/O mapping + * ---------------------------------------------------------------------------- + */ + +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#define OMAP2_L3_IO_OFFSET 0x90000000 +#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + +#define OMAP4_L3_IO_OFFSET 0xb4000000 +#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ + +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + +#define OMAP4_GPMC_IO_OFFSET 0xa9000000 +#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) + +#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ +#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) + +/* + * ---------------------------------------------------------------------------- + * Omap1 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +#define OMAP1_IO_PHYS 0xFFFB0000 +#define OMAP1_IO_SIZE 0x40000 +#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) + +/* + * ---------------------------------------------------------------------------- + * Omap2 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +/* We map both L3 and L4 on OMAP2 */ +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ +#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) +#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ + +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ +#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WK_243X_SIZE SZ_1M +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE +#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) + /* 0x6e000000 --> 0xfe000000 */ +#define OMAP243X_GPMC_SIZE SZ_1M +#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) +#define OMAP243X_SDRC_SIZE SZ_1M +#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) +#define OMAP243X_SMS_SIZE SZ_1M + +/* DSP */ +#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_24XX_VIRT 0xe0000000 +#define DSP_MEM_24XX_SIZE 0x28000 +#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_24XX_VIRT 0xe1000000 +#define DSP_IPI_24XX_SIZE SZ_4K +#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_24XX_VIRT 0xe2000000 +#define DSP_MMU_24XX_SIZE SZ_4K + +/* + * ---------------------------------------------------------------------------- + * Omap3 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +/* We map both L3 and L4 on OMAP3 */ +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ +#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) +#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ + +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* + * Need to look at the Size 4M for L4. + * VPOM3430 was not working for Int controller + */ + +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ +#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WK_34XX_SIZE SZ_1M + +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER_34XX_SIZE SZ_1M + +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_34XX_SIZE SZ_8M + +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE + /* 0x6e000000 --> 0xfe000000 */ +#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) +#define OMAP34XX_GPMC_SIZE SZ_1M + +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) +#define OMAP343X_SMS_SIZE SZ_1M + +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) +#define OMAP343X_SDRC_SIZE SZ_1M + +/* DSP */ +#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_34XX_VIRT 0xe0000000 +#define DSP_MEM_34XX_SIZE 0x28000 +#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_34XX_VIRT 0xe1000000 +#define DSP_IPI_34XX_SIZE SZ_4K +#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_34XX_VIRT 0xe2000000 +#define DSP_MMU_34XX_SIZE SZ_4K + +/* + * ---------------------------------------------------------------------------- + * Omap4 specific IO mapping + * ---------------------------------------------------------------------------- + */ + +/* We map both L3 and L4 on OMAP4 */ +#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) +#define L3_44XX_SIZE SZ_1M + +#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_44XX_SIZE SZ_4M + + +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ +#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WK_44XX_SIZE SZ_1M + +#define L4_PER_44XX_PHYS L4_PER_44XX_BASE + /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER_44XX_SIZE SZ_4M + +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + +#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_44XX_SIZE SZ_8M + +#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE + /* 0x50000000 --> 0xf9000000 */ +#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) +#define OMAP44XX_GPMC_SIZE SZ_1M + + +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M +/* + * ---------------------------------------------------------------------------- + * Omap specific register access + * ---------------------------------------------------------------------------- + */ + +#ifndef __ASSEMBLER__ + +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ + +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); + +struct omap_sdrc_params; + +extern void omap1_map_common_io(void); +extern void omap1_init_common_hw(void); + +extern void omap2_map_common_io(void); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); + +#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) +#define __arch_iounmap(v) omap_iounmap(v) + +void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); +void omap_iounmap(volatile void __iomem *addr); + +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h new file mode 100644 index 000000000000..6a6d0281e1d5 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -0,0 +1,487 @@ +/* + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. + */ + +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_DMA_LCD 25 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ 0 +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) + +/* + * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) + +#define INT_24XX_SYS_NIRQ 7 +#define INT_24XX_SDMA_IRQ0 12 +#define INT_24XX_SDMA_IRQ1 13 +#define INT_24XX_SDMA_IRQ2 14 +#define INT_24XX_SDMA_IRQ3 15 +#define INT_24XX_CAM_IRQ 24 +#define INT_24XX_DSS_IRQ 25 +#define INT_24XX_MAIL_U0_MPU 26 +#define INT_24XX_DSP_UMA 27 +#define INT_24XX_DSP_MMU 28 +#define INT_24XX_GPIO_BANK1 29 +#define INT_24XX_GPIO_BANK2 30 +#define INT_24XX_GPIO_BANK3 31 +#define INT_24XX_GPIO_BANK4 32 +#define INT_24XX_GPIO_BANK5 33 +#define INT_24XX_MAIL_U3_MPU 34 +#define INT_24XX_GPTIMER1 37 +#define INT_24XX_GPTIMER2 38 +#define INT_24XX_GPTIMER3 39 +#define INT_24XX_GPTIMER4 40 +#define INT_24XX_GPTIMER5 41 +#define INT_24XX_GPTIMER6 42 +#define INT_24XX_GPTIMER7 43 +#define INT_24XX_GPTIMER8 44 +#define INT_24XX_GPTIMER9 45 +#define INT_24XX_GPTIMER10 46 +#define INT_24XX_GPTIMER11 47 +#define INT_24XX_GPTIMER12 48 +#define INT_24XX_SHA1MD5 51 +#define INT_24XX_MCBSP4_IRQ_TX 54 +#define INT_24XX_MCBSP4_IRQ_RX 55 +#define INT_24XX_I2C1_IRQ 56 +#define INT_24XX_I2C2_IRQ 57 +#define INT_24XX_HDQ_IRQ 58 +#define INT_24XX_MCBSP1_IRQ_TX 59 +#define INT_24XX_MCBSP1_IRQ_RX 60 +#define INT_24XX_MCBSP2_IRQ_TX 62 +#define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_SPI1_IRQ 65 +#define INT_24XX_SPI2_IRQ 66 +#define INT_24XX_UART1_IRQ 72 +#define INT_24XX_UART2_IRQ 73 +#define INT_24XX_UART3_IRQ 74 +#define INT_24XX_USB_IRQ_GEN 75 +#define INT_24XX_USB_IRQ_NISO 76 +#define INT_24XX_USB_IRQ_ISO 77 +#define INT_24XX_USB_IRQ_HGEN 78 +#define INT_24XX_USB_IRQ_HSOF 79 +#define INT_24XX_USB_IRQ_OTG 80 +#define INT_24XX_MCBSP5_IRQ_TX 81 +#define INT_24XX_MCBSP5_IRQ_RX 82 +#define INT_24XX_MMC_IRQ 83 +#define INT_24XX_MMC2_IRQ 86 +#define INT_24XX_MCBSP3_IRQ_TX 89 +#define INT_24XX_MCBSP3_IRQ_RX 90 +#define INT_24XX_SPI3_IRQ 91 + +#define INT_243X_MCBSP2_IRQ 16 +#define INT_243X_MCBSP3_IRQ 17 +#define INT_243X_MCBSP4_IRQ 18 +#define INT_243X_MCBSP5_IRQ 19 +#define INT_243X_MCBSP1_IRQ 64 +#define INT_243X_HS_USB_MC 92 +#define INT_243X_HS_USB_DMA 93 +#define INT_243X_CARKIT_IRQ 94 + +#define INT_34XX_BENCH_MPU_EMUL 3 +#define INT_34XX_ST_MCBSP2_IRQ 4 +#define INT_34XX_ST_MCBSP3_IRQ 5 +#define INT_34XX_SSM_ABORT_IRQ 6 +#define INT_34XX_SYS_NIRQ 7 +#define INT_34XX_D2D_FW_IRQ 8 +#define INT_34XX_PRCM_MPU_IRQ 11 +#define INT_34XX_MCBSP1_IRQ 16 +#define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_MCBSP3_IRQ 22 +#define INT_34XX_MCBSP4_IRQ 23 +#define INT_34XX_CAM_IRQ 24 +#define INT_34XX_MCBSP5_IRQ 27 +#define INT_34XX_GPIO_BANK1 29 +#define INT_34XX_GPIO_BANK2 30 +#define INT_34XX_GPIO_BANK3 31 +#define INT_34XX_GPIO_BANK4 32 +#define INT_34XX_GPIO_BANK5 33 +#define INT_34XX_GPIO_BANK6 34 +#define INT_34XX_USIM_IRQ 35 +#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_SPI4_IRQ 48 +#define INT_34XX_SHA1MD52_IRQ 49 +#define INT_34XX_FPKA_READY_IRQ 50 +#define INT_34XX_SHA1MD51_IRQ 51 +#define INT_34XX_RNG_IRQ 52 +#define INT_34XX_I2C3_IRQ 61 +#define INT_34XX_FPKA_ERROR_IRQ 64 +#define INT_34XX_PBIAS_IRQ 75 +#define INT_34XX_OHCI_IRQ 76 +#define INT_34XX_EHCI_IRQ 77 +#define INT_34XX_TLL_IRQ 78 +#define INT_34XX_PARTHASH_IRQ 79 +#define INT_34XX_MMC3_IRQ 94 +#define INT_34XX_GPT12_IRQ 95 + +#define INT_34XX_BENCH_MPU_EMUL 3 + + +#define IRQ_GIC_START 32 +#define INT_44XX_LOCALTIMER_IRQ 29 +#define INT_44XX_LOCALWDT_IRQ 30 + +#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START) +#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START) +#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START) +#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START) +#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START) +#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START) +#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START) +#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START) +#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START) +#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START) +#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START) +#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START) +#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START) +#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START) +#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START) +#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START) +#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START) +#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START) +#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START) +#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START) +#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START) +#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START) +#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START) +#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START) +#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START) +#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START) +#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START) +#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START) +#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START) +#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START) +#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START) +#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START) +#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START) +#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START) +#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START) +#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START) +#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START) +#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START) + +#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START) +#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START) +#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START) +#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START) +#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START) + +#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START) +#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START) +#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START) +#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START) +#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START) +#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START) +#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START) +#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START) +#define INT_44XX_MMC5_IRQ (59 + IRQ_GIC_START) +#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START) +#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START) +#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START) +#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START) +#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START) +#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START) +#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START) +#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START) +#define INT_44XX_MMC4_IRQ (96 + IRQ_GIC_START) + + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ +#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_BASE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 +#else +#define TWL4030_BASE_NR_IRQS 0 +#define TWL4030_PWR_NR_IRQS 0 +#endif +#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) +#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END +#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) + +/* External TWL4030 gpio interrupts are optional */ +#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END +#ifdef CONFIG_GPIO_TWL4030 +#define TWL4030_GPIO_NR_IRQS 18 +#else +#define TWL4030_GPIO_NR_IRQS 0 +#endif +#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) + +/* Total number of interrupts depends on the enabled blocks above */ +#define NR_IRQS TWL4030_GPIO_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#ifndef __ASSEMBLY__ +extern void omap_init_irq(void); +extern int omap_irq_pending(void); +#endif + +#include + +#endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h new file mode 100644 index 000000000000..9ad41dc484c1 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/memory.h @@ -0,0 +1,96 @@ +/* + * arch/arm/plat-omap/include/mach/memory.h + * + * Memory map for OMAP-1510 and 1610 + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon + * + * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#if defined(CONFIG_ARCH_OMAP1) +#define PHYS_OFFSET UL(0x10000000) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) +#define PHYS_OFFSET UL(0x80000000) +#endif + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP15XX + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) + +#define __arch_page_to_dma(dev, page) \ + ({ dma_addr_t __dma = page_to_phys(page); \ + if (is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ + __dma; }) + +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __phys_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_phys(__addr)); }) + +#endif /* CONFIG_ARCH_OMAP15XX */ + +/* Override the ARM default */ +#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + +#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) +#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE +#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 +#endif + +#define CONSISTENT_DMA_SIZE \ + (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) + +#endif + +#endif + diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h new file mode 100644 index 000000000000..dcaa8fde7063 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -0,0 +1,51 @@ +/* + * OMAP4 machine specific smp.h + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_SMP_H +#define OMAP_ARCH_SMP_H + +#include + +/* + * set_event() is used to wake up secondary core from wfe using sev. ROM + * code puts the second core into wfe(standby). + * + */ +#define set_event() __asm__ __volatile__ ("sev" : : : "memory") + +/* Needed for secondary core boot */ +extern void omap_secondary_startup(void); + +/* + * We use Soft IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +/* + * Read MPIDR: Multiprocessor affinity register + */ +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h new file mode 100644 index 000000000000..ed8ec7477261 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/system.h @@ -0,0 +1,51 @@ +/* + * Copied from arch/arm/mach-sa1100/include/mach/system.h + * Copyright (c) 1999 Nicolas Pitre + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include + +#include +#include + +#include + +#ifndef CONFIG_MACH_VOICEBLUE +#define voiceblue_reset() do {} while (0) +#else +extern void voiceblue_reset(void); +#endif + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void omap1_arch_reset(char mode) +{ + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), + DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + + if (machine_is_voiceblue()) + voiceblue_reset(); + else + omap_writew(1, ARM_RSTCT1); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + if (!cpu_class_is_omap2()) + omap1_arch_reset(mode); + else + omap_prcm_arch_reset(mode); +} + +#endif diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h new file mode 100644 index 000000000000..6d35767bc48f --- /dev/null +++ b/arch/arm/plat-omap/include/plat/timex.h @@ -0,0 +1,41 @@ +/* + * arch/arm/plat-omap/include/mach/timex.h + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if !defined(__ASM_ARCH_OMAP_TIMEX_H) +#define __ASM_ARCH_OMAP_TIMEX_H + +/* + * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, + * and that's why the CLOCK_TICK_RATE is not 32768. + */ +#ifdef CONFIG_OMAP_32K_TIMER +#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) +#else +#define CLOCK_TICK_RATE (HZ * 100000UL) +#endif + +#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h new file mode 100644 index 000000000000..ddf7b88dec4d --- /dev/null +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -0,0 +1,84 @@ +/* + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Rewritten by: + * Author: + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include + +unsigned int system_rev; + +#define UART_OMAP_MDR1 0x08 /* mode definition register */ +#define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C +#define ID_MASK 0x7fff +#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) +#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK + +static void putc(int c) +{ + volatile u8 * uart = 0; + int shift = 2; + +#ifdef CONFIG_MACH_OMAP_PALMTE + return; +#endif + +#ifdef CONFIG_ARCH_OMAP +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + uart = (volatile u8 *)(OMAP_UART3_BASE); +#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) + uart = (volatile u8 *)(OMAP_UART2_BASE); +#else + uart = (volatile u8 *)(OMAP_UART1_BASE); +#endif + +#ifdef CONFIG_ARCH_OMAP1 + /* Determine which serial port to use */ + do { + /* MMU is not on, so cpu_is_omapXXXX() won't work here */ + unsigned int omap_id = omap_get_id(); + + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) + shift = 0; + + if (check_port(uart, shift)) + break; + /* Silent boot if no serial ports are enabled. */ + return; + } while (0); +#endif /* CONFIG_ARCH_OMAP1 */ +#endif + + /* + * Now, xmit each character + */ + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() -- cgit v1.2.3-58-ga151 From ce491cf85466c3377228c5a852ea627ec5136956 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 20 Oct 2009 09:40:47 -0700 Subject: omap: headers: Move remaining headers from include/mach to include/plat Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include --- arch/arm/mach-omap1/board-ams-delta.c | 12 +- arch/arm/mach-omap1/board-fsample.c | 14 +- arch/arm/mach-omap1/board-generic.c | 8 +- arch/arm/mach-omap1/board-h2-mmc.c | 2 +- arch/arm/mach-omap1/board-h2.c | 16 +- arch/arm/mach-omap1/board-h3-mmc.c | 2 +- arch/arm/mach-omap1/board-h3.c | 14 +- arch/arm/mach-omap1/board-innovator.c | 14 +- arch/arm/mach-omap1/board-nokia770.c | 22 +- arch/arm/mach-omap1/board-osk.c | 10 +- arch/arm/mach-omap1/board-palmte.c | 16 +- arch/arm/mach-omap1/board-palmtt.c | 18 +- arch/arm/mach-omap1/board-palmz71.c | 18 +- arch/arm/mach-omap1/board-perseus2.c | 14 +- arch/arm/mach-omap1/board-sx1-mmc.c | 4 +- arch/arm/mach-omap1/board-sx1.c | 18 +- arch/arm/mach-omap1/board-voiceblue.c | 8 +- arch/arm/mach-omap1/clock.c | 8 +- arch/arm/mach-omap1/devices.c | 8 +- arch/arm/mach-omap1/fpga.c | 2 +- arch/arm/mach-omap1/id.c | 2 +- arch/arm/mach-omap1/io.c | 4 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/leds-h2p2-debug.c | 2 +- arch/arm/mach-omap1/leds.c | 2 +- arch/arm/mach-omap1/mailbox.c | 2 +- arch/arm/mach-omap1/mcbsp.c | 10 +- arch/arm/mach-omap1/mux.c | 2 +- arch/arm/mach-omap1/pm.c | 14 +- arch/arm/mach-omap1/serial.c | 6 +- arch/arm/mach-omap1/timer32k.c | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 12 +- arch/arm/mach-omap2/board-3430sdp.c | 22 +- arch/arm/mach-omap2/board-4430sdp.c | 8 +- arch/arm/mach-omap2/board-apollon.c | 14 +- arch/arm/mach-omap2/board-generic.c | 8 +- arch/arm/mach-omap2/board-h4.c | 18 +- arch/arm/mach-omap2/board-ldp.c | 14 +- arch/arm/mach-omap2/board-n8x0.c | 10 +- arch/arm/mach-omap2/board-omap3beagle.c | 14 +- arch/arm/mach-omap2/board-omap3evm.c | 12 +- arch/arm/mach-omap2/board-omap3pandora.c | 12 +- arch/arm/mach-omap2/board-overo.c | 14 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 18 +- arch/arm/mach-omap2/board-rx51.c | 16 +- arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- arch/arm/mach-omap2/board-zoom2.c | 6 +- arch/arm/mach-omap2/clock.c | 10 +- arch/arm/mach-omap2/clock.h | 2 +- arch/arm/mach-omap2/clock24xx.c | 8 +- arch/arm/mach-omap2/clock34xx.c | 8 +- arch/arm/mach-omap2/clock34xx.h | 2 +- arch/arm/mach-omap2/clockdomain.c | 6 +- arch/arm/mach-omap2/clockdomains.h | 2 +- arch/arm/mach-omap2/control.c | 4 +- arch/arm/mach-omap2/devices.c | 12 +- arch/arm/mach-omap2/gpmc-onenand.c | 6 +- arch/arm/mach-omap2/gpmc-smc91x.c | 6 +- arch/arm/mach-omap2/gpmc.c | 4 +- arch/arm/mach-omap2/id.c | 6 +- arch/arm/mach-omap2/include/mach/entry-macro.S | 6 +- arch/arm/mach-omap2/io.c | 20 +- arch/arm/mach-omap2/iommu2.c | 2 +- arch/arm/mach-omap2/mailbox.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 8 +- arch/arm/mach-omap2/mmc-twl4030.c | 6 +- arch/arm/mach-omap2/mux.c | 4 +- arch/arm/mach-omap2/omap-smp.c | 2 +- arch/arm/mach-omap2/omap3-iommu.c | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 10 +- arch/arm/mach-omap2/omap_hwmod_2420.h | 6 +- arch/arm/mach-omap2/omap_hwmod_2430.h | 6 +- arch/arm/mach-omap2/omap_hwmod_34xx.h | 6 +- arch/arm/mach-omap2/pm-debug.c | 8 +- arch/arm/mach-omap2/pm.h | 2 +- arch/arm/mach-omap2/pm24xx.c | 16 +- arch/arm/mach-omap2/pm34xx.c | 10 +- arch/arm/mach-omap2/powerdomain.c | 6 +- arch/arm/mach-omap2/powerdomains.h | 2 +- arch/arm/mach-omap2/powerdomains24xx.h | 2 +- arch/arm/mach-omap2/powerdomains34xx.h | 2 +- arch/arm/mach-omap2/prcm.c | 4 +- arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 2 +- .../mach-omap2/sdram-qimonda-hyb18m512160af-6.h | 2 +- arch/arm/mach-omap2/sdrc.c | 8 +- arch/arm/mach-omap2/sdrc.h | 2 +- arch/arm/mach-omap2/sdrc2xxx.c | 8 +- arch/arm/mach-omap2/serial.c | 8 +- arch/arm/mach-omap2/sleep24xx.S | 2 +- arch/arm/mach-omap2/sleep34xx.S | 2 +- arch/arm/mach-omap2/timer-gp.c | 2 +- arch/arm/mach-omap2/usb-musb.c | 4 +- arch/arm/mach-omap2/usb-tusb6010.c | 4 +- arch/arm/plat-omap/clock.c | 2 +- arch/arm/plat-omap/common.c | 12 +- arch/arm/plat-omap/cpu-omap.c | 2 +- arch/arm/plat-omap/debug-devices.c | 2 +- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/devices.c | 16 +- arch/arm/plat-omap/dma.c | 4 +- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-omap/fb.c | 6 +- arch/arm/plat-omap/i2c.c | 2 +- arch/arm/plat-omap/include/mach/blizzard.h | 12 - arch/arm/plat-omap/include/mach/board-ams-delta.h | 76 -- arch/arm/plat-omap/include/mach/board-sx1.h | 52 -- arch/arm/plat-omap/include/mach/board-voiceblue.h | 19 - arch/arm/plat-omap/include/mach/board.h | 160 ---- arch/arm/plat-omap/include/mach/clock.h | 163 ---- arch/arm/plat-omap/include/mach/clockdomain.h | 111 --- arch/arm/plat-omap/include/mach/common.h | 74 -- arch/arm/plat-omap/include/mach/control.h | 230 ------ arch/arm/plat-omap/include/mach/cpu.h | 426 ---------- arch/arm/plat-omap/include/mach/dma.h | 675 ---------------- arch/arm/plat-omap/include/mach/dmtimer.h | 84 -- arch/arm/plat-omap/include/mach/dsp_common.h | 40 - arch/arm/plat-omap/include/mach/fpga.h | 197 ----- arch/arm/plat-omap/include/mach/gpio-switch.h | 54 -- arch/arm/plat-omap/include/mach/gpmc-smc91x.h | 42 - arch/arm/plat-omap/include/mach/gpmc.h | 112 --- arch/arm/plat-omap/include/mach/hwa742.h | 8 - arch/arm/plat-omap/include/mach/iommu.h | 168 ---- arch/arm/plat-omap/include/mach/iommu2.h | 96 --- arch/arm/plat-omap/include/mach/iovmm.h | 94 --- arch/arm/plat-omap/include/mach/irda.h | 33 - arch/arm/plat-omap/include/mach/keypad.h | 42 - arch/arm/plat-omap/include/mach/lcd_mipid.h | 29 - arch/arm/plat-omap/include/mach/led.h | 24 - arch/arm/plat-omap/include/mach/mailbox.h | 96 --- arch/arm/plat-omap/include/mach/mcbsp.h | 462 ----------- arch/arm/plat-omap/include/mach/mcspi.h | 15 - arch/arm/plat-omap/include/mach/menelaus.h | 49 -- arch/arm/plat-omap/include/mach/mmc.h | 157 ---- arch/arm/plat-omap/include/mach/mux.h | 864 --------------------- arch/arm/plat-omap/include/mach/nand.h | 24 - arch/arm/plat-omap/include/mach/omap-alsa.h | 123 --- arch/arm/plat-omap/include/mach/omap-pm.h | 301 ------- arch/arm/plat-omap/include/mach/omap1510.h | 50 -- arch/arm/plat-omap/include/mach/omap16xx.h | 202 ----- arch/arm/plat-omap/include/mach/omap24xx.h | 89 --- arch/arm/plat-omap/include/mach/omap34xx.h | 87 --- arch/arm/plat-omap/include/mach/omap44xx.h | 44 -- arch/arm/plat-omap/include/mach/omap730.h | 102 --- arch/arm/plat-omap/include/mach/omap7xx.h | 104 --- arch/arm/plat-omap/include/mach/omap850.h | 102 --- arch/arm/plat-omap/include/mach/omap_device.h | 141 ---- arch/arm/plat-omap/include/mach/omap_hwmod.h | 447 ----------- arch/arm/plat-omap/include/mach/omapfb.h | 398 ---------- arch/arm/plat-omap/include/mach/onenand.h | 43 - arch/arm/plat-omap/include/mach/param.h | 8 - arch/arm/plat-omap/include/mach/powerdomain.h | 182 ----- arch/arm/plat-omap/include/mach/prcm.h | 35 - arch/arm/plat-omap/include/mach/sdrc.h | 143 ---- arch/arm/plat-omap/include/mach/serial.h | 68 -- arch/arm/plat-omap/include/mach/sram.h | 71 -- arch/arm/plat-omap/include/mach/tc.h | 106 --- arch/arm/plat-omap/include/mach/timer-gp.h | 17 - arch/arm/plat-omap/include/mach/usb.h | 145 ---- arch/arm/plat-omap/include/plat/blizzard.h | 12 + arch/arm/plat-omap/include/plat/board-ams-delta.h | 76 ++ arch/arm/plat-omap/include/plat/board-sx1.h | 52 ++ arch/arm/plat-omap/include/plat/board-voiceblue.h | 19 + arch/arm/plat-omap/include/plat/board.h | 160 ++++ arch/arm/plat-omap/include/plat/clock.h | 163 ++++ arch/arm/plat-omap/include/plat/clockdomain.h | 111 +++ arch/arm/plat-omap/include/plat/common.h | 74 ++ arch/arm/plat-omap/include/plat/control.h | 230 ++++++ arch/arm/plat-omap/include/plat/cpu.h | 426 ++++++++++ arch/arm/plat-omap/include/plat/dma.h | 675 ++++++++++++++++ arch/arm/plat-omap/include/plat/dmtimer.h | 84 ++ arch/arm/plat-omap/include/plat/dsp_common.h | 40 + arch/arm/plat-omap/include/plat/fpga.h | 197 +++++ arch/arm/plat-omap/include/plat/gpio-switch.h | 54 ++ arch/arm/plat-omap/include/plat/gpmc-smc91x.h | 42 + arch/arm/plat-omap/include/plat/gpmc.h | 112 +++ arch/arm/plat-omap/include/plat/hardware.h | 16 +- arch/arm/plat-omap/include/plat/hwa742.h | 8 + arch/arm/plat-omap/include/plat/iommu.h | 168 ++++ arch/arm/plat-omap/include/plat/iommu2.h | 96 +++ arch/arm/plat-omap/include/plat/iovmm.h | 94 +++ arch/arm/plat-omap/include/plat/irda.h | 33 + arch/arm/plat-omap/include/plat/keypad.h | 42 + arch/arm/plat-omap/include/plat/lcd_mipid.h | 29 + arch/arm/plat-omap/include/plat/led.h | 24 + arch/arm/plat-omap/include/plat/mailbox.h | 96 +++ arch/arm/plat-omap/include/plat/mcbsp.h | 462 +++++++++++ arch/arm/plat-omap/include/plat/mcspi.h | 15 + arch/arm/plat-omap/include/plat/menelaus.h | 49 ++ arch/arm/plat-omap/include/plat/mmc.h | 157 ++++ arch/arm/plat-omap/include/plat/mux.h | 864 +++++++++++++++++++++ arch/arm/plat-omap/include/plat/nand.h | 24 + arch/arm/plat-omap/include/plat/omap-alsa.h | 123 +++ arch/arm/plat-omap/include/plat/omap-pm.h | 301 +++++++ arch/arm/plat-omap/include/plat/omap1510.h | 50 ++ arch/arm/plat-omap/include/plat/omap16xx.h | 202 +++++ arch/arm/plat-omap/include/plat/omap24xx.h | 89 +++ arch/arm/plat-omap/include/plat/omap34xx.h | 87 +++ arch/arm/plat-omap/include/plat/omap44xx.h | 44 ++ arch/arm/plat-omap/include/plat/omap730.h | 102 +++ arch/arm/plat-omap/include/plat/omap7xx.h | 104 +++ arch/arm/plat-omap/include/plat/omap850.h | 102 +++ arch/arm/plat-omap/include/plat/omap_device.h | 141 ++++ arch/arm/plat-omap/include/plat/omap_hwmod.h | 447 +++++++++++ arch/arm/plat-omap/include/plat/omapfb.h | 398 ++++++++++ arch/arm/plat-omap/include/plat/onenand.h | 43 + arch/arm/plat-omap/include/plat/param.h | 8 + arch/arm/plat-omap/include/plat/powerdomain.h | 182 +++++ arch/arm/plat-omap/include/plat/prcm.h | 35 + arch/arm/plat-omap/include/plat/sdrc.h | 143 ++++ arch/arm/plat-omap/include/plat/serial.h | 68 ++ arch/arm/plat-omap/include/plat/sram.h | 71 ++ arch/arm/plat-omap/include/plat/system.h | 2 +- arch/arm/plat-omap/include/plat/tc.h | 106 +++ arch/arm/plat-omap/include/plat/timer-gp.h | 17 + arch/arm/plat-omap/include/plat/uncompress.h | 2 +- arch/arm/plat-omap/include/plat/usb.h | 145 ++++ arch/arm/plat-omap/io.c | 12 +- arch/arm/plat-omap/iommu-debug.c | 4 +- arch/arm/plat-omap/iommu.c | 2 +- arch/arm/plat-omap/iovmm.c | 4 +- arch/arm/plat-omap/mailbox.c | 2 +- arch/arm/plat-omap/mcbsp.c | 4 +- arch/arm/plat-omap/mux.c | 2 +- arch/arm/plat-omap/omap-pm-noop.c | 4 +- arch/arm/plat-omap/omap_device.c | 4 +- arch/arm/plat-omap/sram.c | 8 +- arch/arm/plat-omap/usb.c | 8 +- drivers/input/keyboard/omap-keypad.c | 6 +- drivers/leds/leds-ams-delta.c | 2 +- drivers/mfd/menelaus.c | 2 +- drivers/mfd/twl4030-core.c | 2 +- drivers/mmc/host/omap.c | 10 +- drivers/mmc/host/omap_hsmmc.c | 8 +- drivers/mtd/maps/omap_nor.c | 2 +- drivers/mtd/nand/ams-delta.c | 2 +- drivers/mtd/nand/omap2.c | 6 +- drivers/mtd/onenand/omap2.c | 8 +- drivers/pcmcia/omap_cf.c | 4 +- drivers/spi/omap2_mcspi.c | 4 +- drivers/spi/omap_uwire.c | 4 +- drivers/usb/gadget/omap_udc.c | 6 +- drivers/usb/host/ohci-omap.c | 6 +- drivers/usb/musb/omap2430.c | 2 +- drivers/usb/musb/omap2430.h | 2 +- drivers/usb/musb/tusb6010_omap.c | 4 +- drivers/usb/otg/isp1301_omap.c | 4 +- drivers/video/backlight/omap1_bl.c | 4 +- drivers/video/omap/blizzard.c | 6 +- drivers/video/omap/dispc.c | 6 +- drivers/video/omap/hwa742.c | 6 +- drivers/video/omap/lcd_2430sdp.c | 4 +- drivers/video/omap/lcd_ams_delta.c | 4 +- drivers/video/omap/lcd_apollon.c | 4 +- drivers/video/omap/lcd_h3.c | 2 +- drivers/video/omap/lcd_h4.c | 2 +- drivers/video/omap/lcd_inn1510.c | 4 +- drivers/video/omap/lcd_inn1610.c | 2 +- drivers/video/omap/lcd_ldp.c | 4 +- drivers/video/omap/lcd_mipid.c | 4 +- drivers/video/omap/lcd_omap2evm.c | 4 +- drivers/video/omap/lcd_omap3beagle.c | 4 +- drivers/video/omap/lcd_omap3evm.c | 4 +- drivers/video/omap/lcd_osk.c | 4 +- drivers/video/omap/lcd_overo.c | 4 +- drivers/video/omap/lcd_palmte.c | 4 +- drivers/video/omap/lcd_palmtt.c | 2 +- drivers/video/omap/lcd_palmz71.c | 2 +- drivers/video/omap/lcdc.c | 4 +- drivers/video/omap/omapfb_main.c | 4 +- drivers/video/omap/rfbi.c | 2 +- drivers/video/omap/sossi.c | 4 +- drivers/watchdog/omap_wdt.c | 2 +- sound/soc/omap/ams-delta.c | 4 +- sound/soc/omap/n810.c | 2 +- sound/soc/omap/omap-mcbsp.c | 6 +- sound/soc/omap/omap-pcm.c | 2 +- sound/soc/omap/omap2evm.c | 2 +- sound/soc/omap/omap3beagle.c | 2 +- sound/soc/omap/omap3evm.c | 2 +- sound/soc/omap/osk5912.c | 2 +- sound/soc/omap/overo.c | 2 +- sound/soc/omap/sdp3430.c | 2 +- sound/soc/omap/zoom2.c | 2 +- 283 files changed, 8226 insertions(+), 8226 deletions(-) delete mode 100644 arch/arm/plat-omap/include/mach/blizzard.h delete mode 100644 arch/arm/plat-omap/include/mach/board-ams-delta.h delete mode 100644 arch/arm/plat-omap/include/mach/board-sx1.h delete mode 100644 arch/arm/plat-omap/include/mach/board-voiceblue.h delete mode 100644 arch/arm/plat-omap/include/mach/board.h delete mode 100644 arch/arm/plat-omap/include/mach/clock.h delete mode 100644 arch/arm/plat-omap/include/mach/clockdomain.h delete mode 100644 arch/arm/plat-omap/include/mach/common.h delete mode 100644 arch/arm/plat-omap/include/mach/control.h delete mode 100644 arch/arm/plat-omap/include/mach/cpu.h delete mode 100644 arch/arm/plat-omap/include/mach/dma.h delete mode 100644 arch/arm/plat-omap/include/mach/dmtimer.h delete mode 100644 arch/arm/plat-omap/include/mach/dsp_common.h delete mode 100644 arch/arm/plat-omap/include/mach/fpga.h delete mode 100644 arch/arm/plat-omap/include/mach/gpio-switch.h delete mode 100644 arch/arm/plat-omap/include/mach/gpmc-smc91x.h delete mode 100644 arch/arm/plat-omap/include/mach/gpmc.h delete mode 100644 arch/arm/plat-omap/include/mach/hwa742.h delete mode 100644 arch/arm/plat-omap/include/mach/iommu.h delete mode 100644 arch/arm/plat-omap/include/mach/iommu2.h delete mode 100644 arch/arm/plat-omap/include/mach/iovmm.h delete mode 100644 arch/arm/plat-omap/include/mach/irda.h delete mode 100644 arch/arm/plat-omap/include/mach/keypad.h delete mode 100644 arch/arm/plat-omap/include/mach/lcd_mipid.h delete mode 100644 arch/arm/plat-omap/include/mach/led.h delete mode 100644 arch/arm/plat-omap/include/mach/mailbox.h delete mode 100644 arch/arm/plat-omap/include/mach/mcbsp.h delete mode 100644 arch/arm/plat-omap/include/mach/mcspi.h delete mode 100644 arch/arm/plat-omap/include/mach/menelaus.h delete mode 100644 arch/arm/plat-omap/include/mach/mmc.h delete mode 100644 arch/arm/plat-omap/include/mach/mux.h delete mode 100644 arch/arm/plat-omap/include/mach/nand.h delete mode 100644 arch/arm/plat-omap/include/mach/omap-alsa.h delete mode 100644 arch/arm/plat-omap/include/mach/omap-pm.h delete mode 100644 arch/arm/plat-omap/include/mach/omap1510.h delete mode 100644 arch/arm/plat-omap/include/mach/omap16xx.h delete mode 100644 arch/arm/plat-omap/include/mach/omap24xx.h delete mode 100644 arch/arm/plat-omap/include/mach/omap34xx.h delete mode 100644 arch/arm/plat-omap/include/mach/omap44xx.h delete mode 100644 arch/arm/plat-omap/include/mach/omap730.h delete mode 100644 arch/arm/plat-omap/include/mach/omap7xx.h delete mode 100644 arch/arm/plat-omap/include/mach/omap850.h delete mode 100644 arch/arm/plat-omap/include/mach/omap_device.h delete mode 100644 arch/arm/plat-omap/include/mach/omap_hwmod.h delete mode 100644 arch/arm/plat-omap/include/mach/omapfb.h delete mode 100644 arch/arm/plat-omap/include/mach/onenand.h delete mode 100644 arch/arm/plat-omap/include/mach/param.h delete mode 100644 arch/arm/plat-omap/include/mach/powerdomain.h delete mode 100644 arch/arm/plat-omap/include/mach/prcm.h delete mode 100644 arch/arm/plat-omap/include/mach/sdrc.h delete mode 100644 arch/arm/plat-omap/include/mach/serial.h delete mode 100644 arch/arm/plat-omap/include/mach/sram.h delete mode 100644 arch/arm/plat-omap/include/mach/tc.h delete mode 100644 arch/arm/plat-omap/include/mach/timer-gp.h delete mode 100644 arch/arm/plat-omap/include/mach/usb.h create mode 100644 arch/arm/plat-omap/include/plat/blizzard.h create mode 100644 arch/arm/plat-omap/include/plat/board-ams-delta.h create mode 100644 arch/arm/plat-omap/include/plat/board-sx1.h create mode 100644 arch/arm/plat-omap/include/plat/board-voiceblue.h create mode 100644 arch/arm/plat-omap/include/plat/board.h create mode 100644 arch/arm/plat-omap/include/plat/clock.h create mode 100644 arch/arm/plat-omap/include/plat/clockdomain.h create mode 100644 arch/arm/plat-omap/include/plat/common.h create mode 100644 arch/arm/plat-omap/include/plat/control.h create mode 100644 arch/arm/plat-omap/include/plat/cpu.h create mode 100644 arch/arm/plat-omap/include/plat/dma.h create mode 100644 arch/arm/plat-omap/include/plat/dmtimer.h create mode 100644 arch/arm/plat-omap/include/plat/dsp_common.h create mode 100644 arch/arm/plat-omap/include/plat/fpga.h create mode 100644 arch/arm/plat-omap/include/plat/gpio-switch.h create mode 100644 arch/arm/plat-omap/include/plat/gpmc-smc91x.h create mode 100644 arch/arm/plat-omap/include/plat/gpmc.h create mode 100644 arch/arm/plat-omap/include/plat/hwa742.h create mode 100644 arch/arm/plat-omap/include/plat/iommu.h create mode 100644 arch/arm/plat-omap/include/plat/iommu2.h create mode 100644 arch/arm/plat-omap/include/plat/iovmm.h create mode 100644 arch/arm/plat-omap/include/plat/irda.h create mode 100644 arch/arm/plat-omap/include/plat/keypad.h create mode 100644 arch/arm/plat-omap/include/plat/lcd_mipid.h create mode 100644 arch/arm/plat-omap/include/plat/led.h create mode 100644 arch/arm/plat-omap/include/plat/mailbox.h create mode 100644 arch/arm/plat-omap/include/plat/mcbsp.h create mode 100644 arch/arm/plat-omap/include/plat/mcspi.h create mode 100644 arch/arm/plat-omap/include/plat/menelaus.h create mode 100644 arch/arm/plat-omap/include/plat/mmc.h create mode 100644 arch/arm/plat-omap/include/plat/mux.h create mode 100644 arch/arm/plat-omap/include/plat/nand.h create mode 100644 arch/arm/plat-omap/include/plat/omap-alsa.h create mode 100644 arch/arm/plat-omap/include/plat/omap-pm.h create mode 100644 arch/arm/plat-omap/include/plat/omap1510.h create mode 100644 arch/arm/plat-omap/include/plat/omap16xx.h create mode 100644 arch/arm/plat-omap/include/plat/omap24xx.h create mode 100644 arch/arm/plat-omap/include/plat/omap34xx.h create mode 100644 arch/arm/plat-omap/include/plat/omap44xx.h create mode 100644 arch/arm/plat-omap/include/plat/omap730.h create mode 100644 arch/arm/plat-omap/include/plat/omap7xx.h create mode 100644 arch/arm/plat-omap/include/plat/omap850.h create mode 100644 arch/arm/plat-omap/include/plat/omap_device.h create mode 100644 arch/arm/plat-omap/include/plat/omap_hwmod.h create mode 100644 arch/arm/plat-omap/include/plat/omapfb.h create mode 100644 arch/arm/plat-omap/include/plat/onenand.h create mode 100644 arch/arm/plat-omap/include/plat/param.h create mode 100644 arch/arm/plat-omap/include/plat/powerdomain.h create mode 100644 arch/arm/plat-omap/include/plat/prcm.h create mode 100644 arch/arm/plat-omap/include/plat/sdrc.h create mode 100644 arch/arm/plat-omap/include/plat/serial.h create mode 100644 arch/arm/plat-omap/include/plat/sram.h create mode 100644 arch/arm/plat-omap/include/plat/tc.h create mode 100644 arch/arm/plat-omap/include/plat/timer-gp.h create mode 100644 arch/arm/plat-omap/include/plat/usb.h diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a11..7214ff40c16a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -25,13 +25,13 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 74720e65f114..f4b72c1654f5 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -26,14 +26,14 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include /* fsample is pretty close to p2-sample */ diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72f..aaea01823eb2 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include static void __init omap_generic_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 46098f546824..b30c4990744d 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -16,7 +16,7 @@ #include -#include +#include #include #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index aab860307dca..89ba8ec4bbf4 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,14 +37,14 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 5e8877ce35e0..54b0f063e263 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,7 +16,7 @@ #include -#include +#include #include #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 89586b80b8d5..f5cc0a730524 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include #include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb2d0f4..68462c505e3d 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -30,14 +30,14 @@ #include #include -#include -#include +#include +#include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index ed2a48a9ce74..5a275bab2dfe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,17 +26,17 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #define ADS7846_PENDOWN_GPIO 15 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ed891b8a6b15..50c92c13e48a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -47,10 +47,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = { #include #include -#include +#include static struct at24_platform_data at24c04 = { .byte_len = SZ_4K / 8, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0dc..73d115e288a1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,14 +34,14 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139891ff..81dd74dbbd33 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -29,16 +29,16 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde1c5a3..427ad3a6591f 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -33,15 +33,15 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 2f897cf23504..ca7df1e93efc 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -26,14 +26,14 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include static int p2_keymap[] = { KEY(0,0,KEY_UP), diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 58a46e4e45c3..5b33ae8141bc 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -15,9 +15,9 @@ #include #include -#include +#include #include -#include +#include #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca2e1df..b3bb01bbaa0d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -33,15 +33,15 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a553472..ba9db2144b2b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -29,11 +29,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include static struct plat_serial8250_port voiceblue_ports[] = { { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5f77b8355b41..b4fec9a6e89e 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -22,10 +22,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include static const struct clkops clkops_generic; static const struct clkops clkops_uart; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 06808434ea04..6d2f72dcbb04 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -18,11 +18,11 @@ #include #include -#include -#include -#include +#include +#include +#include #include -#include +#include /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 4f2b8a7adb19..5cfce1636da0 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include static void fpga_mask_irq(unsigned int irq) diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index e5dcdf764c91..a0e3560b39db 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a27df2c14acb..2a6d68aa3489 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,8 +15,8 @@ #include #include -#include -#include +#include +#include extern int omap1_clk_init(void); extern void omap_check_revision(void); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 8f98b58575da..db913c34d1fe 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -46,7 +46,7 @@ #include #include #include -#include +#include #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 17c9d0e04216..b4f9be52e1e8 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 8cbf2562dcaa..277f356d4cd0 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include "leds.h" diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 6810b4aeb02c..caf889aaa248 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #define MAILBOX_ARM2DSP1 0x00 diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 3a51cb210de6..6bddce104ee9 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -18,11 +18,11 @@ #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index d59899d6a7fe..1e6145c9ee93 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -29,7 +29,7 @@ #include -#include +#include #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 10f4e4adca17..b1d3f9fade23 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -48,14 +48,14 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "pm.h" diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index cab41713fce2..0e3c507cc44d 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,10 +22,10 @@ #include -#include -#include +#include +#include #include -#include +#include static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index fd3f7396e162..9ad118563f7d 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,7 +52,7 @@ #include #include #include -#include +#include struct sys_timer omap_timer; diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index e032a33406a7..db9374bc528b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -31,12 +31,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 364ce7e4c7c3..607845b7207f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -29,17 +29,17 @@ #include #include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 763055ef4b54..242bba30b5be 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include static struct platform_device sdp4430_lcd_device = { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index e8a0e56ce2a0..8a2ce77a02ec 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -33,13 +33,13 @@ #include #include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include /* LED & Switch macros */ #define LED0_GPIO13 13 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 1a139c097f66..7e6e6ca88be5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -26,10 +26,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include static struct omap_board_config_kernel generic_config[] = { }; diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 86f78f3d045a..cfb7f1257d20 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -31,16 +31,16 @@ #include #include -#include +#include #include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 4ccc01a1e8c8..5c825607543e 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -32,16 +32,16 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include -#include -#include -#include +#include +#include +#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 2f6ccba5bb3b..764ab1ed576d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -23,12 +23,12 @@ #include #include -#include -#include +#include +#include #include -#include -#include -#include +#include +#include +#include static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7db803d6c629..71a3528b40ce 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -37,13 +37,13 @@ #include #include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 72f0b1eef86e..f6f8592258f9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -32,12 +32,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 12d2381b1b7a..d6bcfaab94ca 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -33,14 +33,14 @@ #include #include -#include -#include +#include +#include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index c5e0da92e50f..461522c1bced 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -38,14 +38,14 @@ #include #include -#include -#include +#include +#include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -67,7 +67,7 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b0eb1ba5d7f..9e16d90021d3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -21,15 +21,15 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index c973812d33ab..060245e14740 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -22,14 +22,14 @@ #include #include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include +#include static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1f13e2a1f322..91ecddc9057a 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,7 +14,7 @@ #include #include -#include +#include #define ZOOM2_SMSC911X_CS 7 #define ZOOM2_SMSC911X_GPIO 158 diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 48bd2af3387e..56f9d8436323 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -20,9 +20,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f2a92d614f0f..4716206547ac 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -24,13 +24,13 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include -#include +#include #include "sdrc.h" #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9ae7540f8af2..43b6bedaafd6 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -16,7 +16,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H #define __ARCH_ARM_MACH_OMAP2_CLOCK_H -#include +#include /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e2dbedd581e8..e70e7e000eaa 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -28,13 +28,13 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include -#include +#include #include "clock.h" #include "prm.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 489556eecbd1..c258f87e78b9 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -27,13 +27,13 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include -#include +#include #include "clock.h" #include "prm.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00a..a1b3de7e2bd7 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#include +#include #include "clock.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 58aff8485df9..fcd82320a6a3 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -28,14 +28,14 @@ #include -#include +#include #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" -#include -#include +#include +#include /* clkdm_list contains all registered struct clockdomains */ static LIST_HEAD(clkdm_list); diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index fe319ae4ca0a..c4ee0761d908 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H -#include +#include /* * OMAP2/3-common clockdomains diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 5f3aad977842..6adb360c6d45 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,8 +15,8 @@ #include #include -#include -#include +#include +#include static void __iomem *omap2_ctrl_base; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index faf7a1e0c525..7d4513b619f2 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,12 +20,12 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include -#include +#include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -250,7 +250,7 @@ static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) -#include +#include #define OMAP2_MCSPI1_BASE 0x48098000 #define OMAP2_MCSPI2_BASE 0x4809a000 diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 54fec53a48e7..7bb69220adfa 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -17,9 +17,9 @@ #include -#include -#include -#include +#include +#include +#include static struct omap_onenand_platform_data *gpmc_onenand_data; diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index df99d31d8b64..6083e21b3be6 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,9 +17,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct omap_smc91x_platform_data *gpmc_cfg; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db23..004da696ace7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -24,9 +24,9 @@ #include #include -#include +#include -#include +#include /* GPMC register offsets */ #define GPMC_REVISION 0x00 diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index a98201cc265c..d28e6fec7e47 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -21,9 +21,9 @@ #include -#include -#include -#include +#include +#include +#include static struct omap_chip_id omap_chip; static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index 6149d34a9cd2..c7f1720bf282 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -15,8 +15,8 @@ #include #include -#include -#include +#include +#include /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) @@ -25,7 +25,7 @@ #define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #endif #if defined(CONFIG_ARCH_OMAP4) -#include +#include #endif #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index fc629532db62..3c33f24208a3 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,24 +27,24 @@ #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" -#include -#include +#include +#include #include "powerdomains.h" -#include +#include #include "clockdomains.h" #endif -#include +#include #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" #include "omap_hwmod_34xx.h" diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 4a0e1cd5c1f4..6f4b7cc8f4d1 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -17,7 +17,7 @@ #include #include -#include +#include /* * omap2 architecture specific register bit definitions diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d0..46e1f2ebcdca 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #define MAILBOX_REVISION 0x000 diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a846aa1ebb4d..baa451733850 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -18,10 +18,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include static void omap2_mcbsp2_mux_setup(void) { diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index c9c59a2db4e2..340391468909 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -20,9 +20,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b5fac32aae70..32c953e608db 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -30,8 +30,8 @@ #include -#include -#include +#include +#include #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 8813ac25c5ed..4890bcf4dadd 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include /* Registers used for communicating startup information */ static void __iomem *omap4_auxcoreboot_reg0; diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c index 194189c746c2..6a9bf4f59d8a 100644 --- a/arch/arm/mach-omap2/omap3-iommu.c +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -12,7 +12,7 @@ #include -#include +#include #define OMAP3_MMU1_BASE 0x480bd400 #define OMAP3_MMU2_BASE 0x5d000000 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 8ac8798feb92..633b216a8b26 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,11 +45,11 @@ #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #include "cm.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h index 767e4965ac4e..a9ca1b99a301 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420.h +++ b/arch/arm/mach-omap2/omap_hwmod_2420.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2420 -#include +#include #include -#include -#include +#include +#include #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h index a412be6420ec..59a208bea6c2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430.h +++ b/arch/arm/mach-omap2/omap_hwmod_2430.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2430 -#include +#include #include -#include -#include +#include +#include #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h index 1e069f831575..b6076b9c364e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_34xx.h +++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h @@ -14,10 +14,10 @@ #ifdef CONFIG_ARCH_OMAP34XX -#include +#include #include -#include -#include +#include +#include #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index deed1ddd039a..7eb2c12c8b7c 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -26,10 +26,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "prm.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8400f5768923..85b6face5392 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -#include +#include extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index bff5c4e89742..cba05b9f041f 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -36,12 +36,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "prm.h" #include "prm-regbits-24xx.h" @@ -50,8 +50,8 @@ #include "sdrc.h" #include "pm.h" -#include -#include +#include +#include static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f618358..10aa923ea484 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -23,11 +23,11 @@ #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #include "cm.h" #include "cm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index f00289abd30f..b6990e377783 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -31,9 +31,9 @@ #include "prm.h" #include "prm-regbits-34xx.h" -#include -#include -#include +#include +#include +#include #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 691470ea4c6a..057b2e3e2c35 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -63,7 +63,7 @@ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE */ -#include +#include #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h index 9f08dc3f7fd2..bd249a495aa9 100644 --- a/arch/arm/mach-omap2/powerdomains24xx.h +++ b/arch/arm/mach-omap2/powerdomains24xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include +#include #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 4dcf94b800ab..f70eb2da17e7 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include +#include #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index ced555a4cd1a..b0d3ad05be2e 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index 02e1c2d4705f..a391b4939f74 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include +#include /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 3751d293cb1f..0e518a72831f 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include +#include /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9e3bd4fa7810..07000de48f34 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,13 +23,13 @@ #include #include -#include -#include -#include +#include +#include +#include #include "prm.h" -#include +#include #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 345183dbc7fb..48207b018989 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -15,7 +15,7 @@ */ #undef DEBUG -#include +#include #ifndef __ASSEMBLER__ extern void __iomem *omap2_sdrc_base; diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index feaec7eaf6bd..0f4d27aef44d 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,13 +24,13 @@ #include #include -#include -#include -#include +#include +#include +#include #include "prm.h" #include "clock.h" -#include +#include #include "sdrc.h" /* Memory timing, DLL mode flags */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a1949d4262cd..f14a1a17f717 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -24,10 +24,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "prm.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 130aadbfa083..c7780cc8d919 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -29,7 +29,7 @@ #include #include -#include +#include #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index e5e2553e79a6..6a749f2fea63 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include "prm.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index cd729706b3a9..df2b7094de98 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 1145a2562b0f..a80441dd19b8 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,8 +28,8 @@ #include #include -#include -#include +#include +#include #ifdef CONFIG_USB_MUSB_SOC diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8622c24cd270..10a2013c1104 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -16,8 +16,8 @@ #include -#include -#include +#include +#include static u8 async_cs, sync_cs; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index bf880e966d3b..681bfc37ebb2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -24,7 +24,7 @@ #include #include -#include +#include static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 8b3ef17183e2..cc050b3313bd 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -29,13 +29,13 @@ #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include -#include +#include #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/sdrc.h" diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 1868c0d8f9b5..4e85389c861a 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #define VERY_HI_RATE 900000000 diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index f6684832ca8f..09c1107637f6 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,7 +16,7 @@ #include -#include +#include #include diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 9395898dd49a..6c768b71ad64 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index d2f54753b016..f86617869b38 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -19,15 +19,15 @@ #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #include -#include -#include -#include +#include +#include +#include #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 034686d66894..9e11cddf3f72 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -32,9 +32,9 @@ #include #include -#include +#include -#include +#include #undef DEBUG diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index e4e848ebbfe6..64f407ee0f4e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include /* register offsets */ diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 3746222bed10..78a4ce538dbd 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -32,9 +32,9 @@ #include #include -#include -#include -#include +#include +#include +#include #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 8b848391f0c8..c08362dbb8ed 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h deleted file mode 100644 index 8d160f171372..000000000000 --- a/arch/arm/plat-omap/include/mach/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected : 1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h deleted file mode 100644 index 51b102dc906b..000000000000 --- a/arch/arm/plat-omap/include/mach/board-ams-delta.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-ams-delta.h - * - * Copyright (C) 2006 Jonathan McDowell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H -#define __ASM_ARCH_OMAP_AMS_DELTA_H - -#if defined (CONFIG_MACH_AMS_DELTA) - -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 -#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 -#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 -#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 -#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 -#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 -#define AMS_DELTA_GPIO_PIN_CONFIG 11 -#define AMS_DELTA_GPIO_PIN_NAND_RB 12 - -#ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); -#endif - -#endif /* CONFIG_MACH_AMS_DELTA */ - -#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h deleted file mode 100644 index 355adbdaae33..000000000000 --- a/arch/arm/plat-omap/include/mach/board-sx1.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Siemens SX1 board definitions - * - * Copyright: Vovan888 at gmail com - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H -#define __ASM_ARCH_SX1_I2C_CHIPS_H - -#define SOFIA_MAX_LIGHT_VAL 0x2B - -#define SOFIA_I2C_ADDR 0x32 -/* Sofia reg 3 bits masks */ -#define SOFIA_POWER1_REG 0x03 - -#define SOFIA_USB_POWER 0x01 -#define SOFIA_MMC_POWER 0x04 -#define SOFIA_BLUETOOTH_POWER 0x08 -#define SOFIA_MMILIGHT_POWER 0x20 - -#define SOFIA_POWER2_REG 0x04 -#define SOFIA_BACKLIGHT_REG 0x06 -#define SOFIA_KEYLIGHT_REG 0x07 -#define SOFIA_DIMMING_REG 0x09 - - -/* Function Prototypes for SX1 devices control on I2C bus */ - -int sx1_setbacklight(u8 backlight); -int sx1_getbacklight(u8 *backlight); -int sx1_setkeylight(u8 keylight); -int sx1_getkeylight(u8 *keylight); - -int sx1_setmmipower(u8 onoff); -int sx1_setusbpower(u8 onoff); -int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); -int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); - -/* MMC prototypes */ - -extern void sx1_mmc_init(void); -extern void sx1_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h deleted file mode 100644 index 27916b210f57..000000000000 --- a/arch/arm/plat-omap/include/mach/board-voiceblue.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h deleted file mode 100644 index 8e913c322810..000000000000 --- a/arch/arm/plat-omap/include/mach/board.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include - -#include - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_LCD 0x4f05 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_FBMEM 0x4f08 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h deleted file mode 100644 index 4b8b0d65cbf2..000000000000 --- a/arch/arm/plat-omap/include/mach/clock.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; -struct clk; -struct clockdomain; - -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, u8 *); - void (*find_companion)(struct clk *, void __iomem **, u8 *); -}; - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - -struct clksel_rate { - u32 val; - u8 div; - u8 flags; -}; - -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned int rate_tolerance; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u8 last_rounded_n; - u8 min_divider; - u8 max_divider; - u32 max_tolerance; - u16 max_multiplier; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; -# endif -}; - -#endif - -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - int id; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - __u32 flags; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - __u8 enable_bit; - __s8 usecount; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - u8 fixed_div; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - __u8 rate_offset; - __u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct cpufreq_frequency_table; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); -#endif -}; - -extern unsigned int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -#ifdef CONFIG_CPU_FREQ -extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -#endif - -extern const struct clkops clkops_null; - -/* Clock flags */ -/* bit 0 is free */ -#define RATE_FIXED (1 << 1) /* Fixed clock rate */ -/* bits 2-4 are free */ -#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 7) -#define CLOCK_NO_IDLE_PARENT (1 << 8) -#define DELAYED_APP (1 << 9) /* Delay application of clock */ -#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ -#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-31 are currently free */ - -/* Clksel_rate flags */ -#define DEFAULT_RATE (1 << 0) -#define RATE_IN_242X (1 << 1) -#define RATE_IN_243X (1 << 2) -#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ -#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - - -#endif diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h deleted file mode 100644 index 99ebd886f134..000000000000 --- a/arch/arm/plat-omap/include/mach/clockdomain.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/clockdomain.h - * - * OMAP2/3 clockdomain framework functions - * - * Copyright (C) 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H -#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H - -#include -#include -#include - -/* Clockdomain capability flags */ -#define CLKDM_CAN_FORCE_SLEEP (1 << 0) -#define CLKDM_CAN_FORCE_WAKEUP (1 << 1) -#define CLKDM_CAN_ENABLE_AUTO (1 << 2) -#define CLKDM_CAN_DISABLE_AUTO (1 << 3) - -#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) -#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) -#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP) - -/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */ -#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 -#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 - -/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */ -#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 -#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 -#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2 -#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3 - -/* - * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps - * and sleepdeps added when a powerdomain should stay active in hwsup mode; - * and conversely, removed when the powerdomain should be allowed to go - * inactive in hwsup mode. - */ -struct clkdm_pwrdm_autodep { - - union { - /* Name of the powerdomain to add a wkdep/sleepdep on */ - const char *name; - - /* Powerdomain pointer (looked up at clkdm_init() time) */ - struct powerdomain *ptr; - } pwrdm; - - /* OMAP chip types that this clockdomain dep is valid on */ - const struct omap_chip_id omap_chip; - -}; - -struct clockdomain { - - /* Clockdomain name */ - const char *name; - - union { - /* Powerdomain enclosing this clockdomain */ - const char *name; - - /* Powerdomain pointer assigned at clkdm_register() */ - struct powerdomain *ptr; - } pwrdm; - - /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ - const u16 clktrctrl_mask; - - /* Clockdomain capability flags */ - const u8 flags; - - /* OMAP chip types that this clockdomain is valid on */ - const struct omap_chip_id omap_chip; - - /* Usecount tracking */ - atomic_t usecount; - - struct list_head node; - -}; - -void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps); -int clkdm_register(struct clockdomain *clkdm); -int clkdm_unregister(struct clockdomain *clkdm); -struct clockdomain *clkdm_lookup(const char *name); - -int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user), - void *user); -struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm); - -void omap2_clkdm_allow_idle(struct clockdomain *clkdm); -void omap2_clkdm_deny_idle(struct clockdomain *clkdm); - -int omap2_clkdm_wakeup(struct clockdomain *clkdm); -int omap2_clkdm_sleep(struct clockdomain *clkdm); - -int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); -int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); - -#endif diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h deleted file mode 100644 index 064f1730f43b..000000000000 --- a/arch/arm/plat-omap/include/mach/common.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include - -struct sys_timer; - -/* used by omap-smp.c and board-4430sdp.c */ -extern void __iomem *gic_cpu_base_addr; - -extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif - -/* IO bases for various OMAP processors */ -struct omap_globals { - u32 class; /* OMAP class to detect */ - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_343x(void); -void omap2_set_globals_443x(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_tap(struct omap_globals *); -void omap2_set_globals_sdrc(struct omap_globals *); -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h deleted file mode 100644 index 805819f3a868..000000000000 --- a/arch/arm/plat-omap/include/mach/control.h +++ /dev/null @@ -1,230 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/control.h - * - * OMAP2/3/4 System Control Module definitions - * - * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - -#include - -#ifndef __ASSEMBLY__ -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#else -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#endif /* __ASSEMBLY__ */ - -/* - * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for - * OMAP24XX and OMAP34XX. - */ - -/* Control submodule offsets */ - -#define OMAP2_CONTROL_INTERFACE 0x000 -#define OMAP2_CONTROL_PADCONFS 0x030 -#define OMAP2_CONTROL_GENERAL 0x270 -#define OMAP343X_CONTROL_MEM_WKUP 0x600 -#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 -#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 - -/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ - -#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) - -/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ -#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) -#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) -#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) -#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) -#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) -#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) -#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) -#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) -#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) -#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) -#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) -#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) - -/* 242x-only CONTROL_GENERAL register offsets */ -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) - -/* 243x-only CONTROL_GENERAL register offsets */ -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) -#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) - -/* 24xx-only CONTROL_GENERAL register offsets */ -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) - -/* 34xx-only CONTROL_GENERAL register offsets */ -#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) -#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) -#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) -#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) -#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) -#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) -#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) -#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) -#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) -#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) -#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) - -/* 34xx D2D idle-related pins, handled by PM core */ -#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 -#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 - -/* - * REVISIT: This list of registers is not comprehensive - there are more - * that should be added. - */ - -/* - * Control module register bit defines - these should eventually go into - * their own regbits file. Some of these will be complicated, depending - * on the device type (general-purpose, emulator, test, secure, bad, other) - * and the security mode (secure, non-secure, don't care) - */ -/* CONTROL_DEVCONF0 bits */ -#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ -#define OMAP24XX_USBSTANDBYCTRL (1 << 15) -#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) -#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) - -/* CONTROL_DEVCONF1 bits */ -#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) -#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ -#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ -#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ -#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ - -/* CONTROL_STATUS bits */ -#define OMAP2_DEVICETYPE_MASK (0x7 << 8) -#define OMAP2_SYSBOOT_5_MASK (1 << 5) -#define OMAP2_SYSBOOT_4_MASK (1 << 4) -#define OMAP2_SYSBOOT_3_MASK (1 << 3) -#define OMAP2_SYSBOOT_2_MASK (1 << 2) -#define OMAP2_SYSBOOT_1_MASK (1 << 1) -#define OMAP2_SYSBOOT_0_MASK (1 << 0) - -/* CONTROL_PBIAS_LITE bits */ -#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) -#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) -#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) -#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) -#define OMAP343X_PBIASLITEVMODE1 (1 << 8) -#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) -#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) -#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) -#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) -#define OMAP2_PBIASLITEVMODE0 (1 << 0) - -/* CONTROL_IVA2_BOOTMOD bits */ -#define OMAP3_IVA2_BOOTMOD_SHIFT 0 -#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) -#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) - -/* CONTROL_PADCONF_X bits */ -#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) -#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) -extern void __iomem *omap_ctrl_base_get(void); -extern u8 omap_ctrl_readb(u16 offset); -extern u16 omap_ctrl_readw(u16 offset); -extern u32 omap_ctrl_readl(u16 offset); -extern void omap_ctrl_writeb(u8 val, u16 offset); -extern void omap_ctrl_writew(u16 val, u16 offset); -extern void omap_ctrl_writel(u32 val, u16 offset); -#else -#define omap_ctrl_base_get() 0 -#define omap_ctrl_readb(x) 0 -#define omap_ctrl_readw(x) 0 -#define omap_ctrl_readl(x) 0 -#define omap_ctrl_writeb(x, y) WARN_ON(1) -#define omap_ctrl_writew(x, y) WARN_ON(1) -#define omap_ctrl_writel(x, y) WARN_ON(1) -#endif -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_CONTROL_H */ - diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h deleted file mode 100644 index f129efb3075e..000000000000 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ /dev/null @@ -1,426 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/cpu.h - * - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009 Texas Instruments. - * - * Written by Tony Lindgren - * - * Added OMAP4 specific defines - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -struct omap_chip_id { - u8 oc; - u8 type; -}; - -#define OMAP_CHIP_INIT(x) { .oc = x } - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3430 -# endif -#endif - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# undef cpu_is_omap242x -# undef cpu_is_omap243x -# define cpu_is_omap24xx() is_omap24xx() -# define cpu_is_omap242x() is_omap242x() -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap850(): True for OMAP850 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(850, 0x0850) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap850() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -#endif - -#if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -#endif - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap3430 -# define cpu_is_omap3430() is_omap3430() -#endif - -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 -# endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 0x24200024 -#define OMAP2420_REV_ES2_0 0x24201024 - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 0x24300024 - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 0x34300034 -#define OMAP3430_REV_ES2_0 0x34301034 -#define OMAP3430_REV_ES2_1 0x34302034 -#define OMAP3430_REV_ES3_0 0x34303034 -#define OMAP3430_REV_ES3_1 0x34304034 - -#define OMAP443X_CLASS 0x44300034 - -/* - * omap_chip bits - * - * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is - * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates - * something that is only valid on that particular ES revision. - * - * These bits may be ORed together to indicate structures that are - * available on multiple chip types. - * - * To test whether a particular structure matches the current OMAP chip type, - * use omap_chip_is(). - * - */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) -#define CHIP_IS_OMAP3430ES3_0 (1 << 5) -#define CHIP_IS_OMAP3430ES3_1 (1 << 6) - -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) - -/* - * "GE" here represents "greater than or equal to" in terms of ES - * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430 - * chips at ES2 and beyond, but not, for example, any OMAP lines after - * OMAP3. - */ -#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ - CHIP_IS_OMAP3430ES3_0 | \ - CHIP_IS_OMAP3430ES3_1) -#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1) - - -int omap_chip_is(struct omap_chip_id oci); -void omap2_check_revision(void); - -#endif diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h deleted file mode 100644 index 72f680b7180d..000000000000 --- a/arch/arm/plat-omap/include/mach/dma.h +++ /dev/null @@ -1,675 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/dma.h - * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* Hardware registers for omap1 */ -#define OMAP1_DMA_BASE (0xfffed800) - -#define OMAP1_DMA_GCR 0x400 -#define OMAP1_DMA_GSCR 0x404 -#define OMAP1_DMA_GRST 0x408 -#define OMAP1_DMA_HW_ID 0x442 -#define OMAP1_DMA_PCH2_ID 0x444 -#define OMAP1_DMA_PCH0_ID 0x446 -#define OMAP1_DMA_PCH1_ID 0x448 -#define OMAP1_DMA_PCHG_ID 0x44a -#define OMAP1_DMA_PCHD_ID 0x44c -#define OMAP1_DMA_CAPS_0_U 0x44e -#define OMAP1_DMA_CAPS_0_L 0x450 -#define OMAP1_DMA_CAPS_1_U 0x452 -#define OMAP1_DMA_CAPS_1_L 0x454 -#define OMAP1_DMA_CAPS_2 0x456 -#define OMAP1_DMA_CAPS_3 0x458 -#define OMAP1_DMA_CAPS_4 0x45a -#define OMAP1_DMA_PCH2_SR 0x460 -#define OMAP1_DMA_PCH0_SR 0x480 -#define OMAP1_DMA_PCH1_SR 0x482 -#define OMAP1_DMA_PCHD_SR 0x4c0 - -/* Hardware registers for omap2 and omap3 */ -#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) -#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) -#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000) - -#define OMAP_DMA4_REVISION 0x00 -#define OMAP_DMA4_GCR 0x78 -#define OMAP_DMA4_IRQSTATUS_L0 0x08 -#define OMAP_DMA4_IRQSTATUS_L1 0x0c -#define OMAP_DMA4_IRQSTATUS_L2 0x10 -#define OMAP_DMA4_IRQSTATUS_L3 0x14 -#define OMAP_DMA4_IRQENABLE_L0 0x18 -#define OMAP_DMA4_IRQENABLE_L1 0x1c -#define OMAP_DMA4_IRQENABLE_L2 0x20 -#define OMAP_DMA4_IRQENABLE_L3 0x24 -#define OMAP_DMA4_SYSSTATUS 0x28 -#define OMAP_DMA4_OCP_SYSCONFIG 0x2c -#define OMAP_DMA4_CAPS_0 0x64 -#define OMAP_DMA4_CAPS_2 0x6c -#define OMAP_DMA4_CAPS_3 0x70 -#define OMAP_DMA4_CAPS_4 0x74 - -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 -#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ - -/* Common channel specific registers for omap1 */ -#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) -#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) -#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) -#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) -#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) -#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) -#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) -#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ -#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) -#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) -#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) -#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) -#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) - -/* Common channel specific registers for omap2 */ -#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) -#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) -#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) -#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) -#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) -#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) -#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) -#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) -#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) -#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) -#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) -#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) - -/* Channel specific registers only on omap1 */ -#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) -#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) -#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) -#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) -#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) -#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) -#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) -#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ -#define OMAP1_DMA_CCEN(n) 0 -#define OMAP1_DMA_CCFN(n) 0 - -/* Channel specific registers only on omap2 */ -#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) -#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) -#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) -#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) -#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) - -/* Additional registers available on OMAP4 */ -#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0) -#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4) -#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8) - -/* Dummy defines to keep multi-omap compiles happy */ -#define OMAP1_DMA_REVISION 0 -#define OMAP1_DMA_IRQSTATUS_L0 0 -#define OMAP1_DMA_IRQENABLE_L0 0 -#define OMAP1_DMA_OCP_SYSCONFIG 0 -#define OMAP_DMA4_HW_ID 0 -#define OMAP_DMA4_CAPS_0_L 0 -#define OMAP_DMA4_CAPS_0_U 0 -#define OMAP_DMA4_CAPS_1_L 0 -#define OMAP_DMA4_CAPS_1_U 0 -#define OMAP_DMA4_GSCR 0 -#define OMAP_DMA4_CPC(n) 0 - -#define OMAP_DMA4_LCH_CTRL(n) 0 -#define OMAP_DMA4_COLOR_L(n) 0 -#define OMAP_DMA4_COLOR_U(n) 0 -#define OMAP_DMA4_CCR2(n) 0 -#define OMAP1_DMA_CSSA(n) 0 -#define OMAP1_DMA_CDSA(n) 0 -#define OMAP_DMA4_CSSA_L(n) 0 -#define OMAP_DMA4_CSSA_U(n) 0 -#define OMAP_DMA4_CDSA_L(n) 0 -#define OMAP_DMA4_CDSA_U(n) 0 -#define OMAP1_DMA_COLOR(n) 0 - -/*----------------------------------------------------------------------------*/ - -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -/* DMA request lines for 44xx */ -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */ -#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */ -#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */ -#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */ -#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */ -#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */ -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */ -#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */ -#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */ -#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */ -#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */ -#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */ -#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */ -#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */ -#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */ -#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */ -#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */ -#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */ -#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */ -#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */ -#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */ -#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */ -#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */ -#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */ -#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */ -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */ -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */ -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */ -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */ -#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */ -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */ -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */ -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */ -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */ -#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */ -#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */ -#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */ -#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */ -#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */ -#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */ -#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */ -#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */ -#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */ -#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */ - -/*----------------------------------------------------------------------------*/ - -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - -#define OMAP1_DMA_TOUT_IRQ (1 << 0) -#define OMAP_DMA_DROP_IRQ (1 << 1) -#define OMAP_DMA_HALF_IRQ (1 << 2) -#define OMAP_DMA_FRAME_IRQ (1 << 3) -#define OMAP_DMA_LAST_IRQ (1 << 4) -#define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP1_DMA_SYNC_IRQ (1 << 6) -#define OMAP2_DMA_PKT_IRQ (1 << 7) -#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) -#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) -#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) -#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) - -#define OMAP_DMA_DATA_TYPE_S8 0x00 -#define OMAP_DMA_DATA_TYPE_S16 0x01 -#define OMAP_DMA_DATA_TYPE_S32 0x02 - -#define OMAP_DMA_SYNC_ELEMENT 0x00 -#define OMAP_DMA_SYNC_FRAME 0x01 -#define OMAP_DMA_SYNC_BLOCK 0x02 -#define OMAP_DMA_SYNC_PACKET 0x03 - -#define OMAP_DMA_SRC_SYNC 0x01 -#define OMAP_DMA_DST_SYNC 0x00 - -#define OMAP_DMA_PORT_EMIFF 0x00 -#define OMAP_DMA_PORT_EMIFS 0x01 -#define OMAP_DMA_PORT_OCP_T1 0x02 -#define OMAP_DMA_PORT_TIPB 0x03 -#define OMAP_DMA_PORT_OCP_T2 0x04 -#define OMAP_DMA_PORT_MPUI 0x05 - -#define OMAP_DMA_AMODE_CONSTANT 0x00 -#define OMAP_DMA_AMODE_POST_INC 0x01 -#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 -#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 - -#define DMA_DEFAULT_FIFO_DEPTH 0x10 -#define DMA_DEFAULT_ARB_RATE 0x01 -/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ -#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ -#define DMA_THREAD_RESERVE_ONET (0x01 << 12) -#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) -#define DMA_THREAD_RESERVE_THREET (0x03 << 12) -#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ -#define DMA_THREAD_FIFO_75 (0x01 << 14) -#define DMA_THREAD_FIFO_25 (0x02 << 14) -#define DMA_THREAD_FIFO_50 (0x03 << 14) - -/* DMA4_OCP_SYSCONFIG bits */ -#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) -#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) -#define DMA_SYSCONFIG_EMUFREE (1 << 5) -#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) -#define DMA_SYSCONFIG_SOFTRESET (1 << 2) -#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) - -#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) -#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) - -#define DMA_IDLEMODE_SMARTIDLE 0x2 -#define DMA_IDLEMODE_NO_IDLE 0x1 -#define DMA_IDLEMODE_FORCE_IDLE 0x0 - -/* Chaining modes*/ -#ifndef CONFIG_ARCH_OMAP1 -#define OMAP_DMA_STATIC_CHAIN 0x1 -#define OMAP_DMA_DYNAMIC_CHAIN 0x2 -#define OMAP_DMA_CHAIN_ACTIVE 0x1 -#define OMAP_DMA_CHAIN_INACTIVE 0x0 -#endif - -#define DMA_CH_PRIO_HIGH 0x1 -#define DMA_CH_PRIO_LOW 0x0 /* Def */ - -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - -enum omap_dma_burst_mode { - OMAP_DMA_DATA_BURST_DIS = 0, - OMAP_DMA_DATA_BURST_4, - OMAP_DMA_DATA_BURST_8, - OMAP_DMA_DATA_BURST_16, -}; - -enum end_type { - OMAP_DMA_LITTLE_ENDIAN = 0, - OMAP_DMA_BIG_ENDIAN -}; - -enum omap_dma_color_mode { - OMAP_DMA_COLOR_DIS = 0, - OMAP_DMA_CONSTANT_FILL, - OMAP_DMA_TRANSPARENT_COPY -}; - -enum omap_dma_write_mode { - OMAP_DMA_WRITE_NON_POSTED = 0, - OMAP_DMA_WRITE_POSTED, - OMAP_DMA_WRITE_LAST_NON_POSTED -}; - -enum omap_dma_channel_mode { - OMAP_DMA_LCH_2D = 0, - OMAP_DMA_LCH_G, - OMAP_DMA_LCH_P, - OMAP_DMA_LCH_PD -}; - -struct omap_dma_channel_params { - int data_type; /* data type 8,16,32 */ - int elem_count; /* number of elements in a frame */ - int frame_count; /* number of frames in a element */ - - int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long src_start; /* source address : physical */ - int src_ei; /* source element index */ - int src_fi; /* source frame index */ - - int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long dst_start; /* source address : physical */ - int dst_ei; /* source element index */ - int dst_fi; /* source frame index */ - - int trigger; /* trigger attached if the channel is - synchronized */ - int sync_mode; /* sycn on element, frame , block or packet */ - int src_or_dst_synch; /* source synch(1) or destination synch(0) */ - - int ie; /* interrupt enabled */ - - unsigned char read_prio;/* read priority */ - unsigned char write_prio;/* write priority */ - -#ifndef CONFIG_ARCH_OMAP1 - enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ -#endif -}; - - -extern void omap_set_dma_priority(int lch, int dst_port, int priority); -extern int omap_request_dma(int dev_id, const char *dev_name, - void (*callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); -extern void omap_enable_dma_irq(int ch, u16 irq_bits); -extern void omap_disable_dma_irq(int ch, u16 irq_bits); -extern void omap_free_dma(int ch); -extern void omap_start_dma(int lch); -extern void omap_stop_dma(int lch); -extern void omap_set_dma_transfer_params(int lch, int data_type, - int elem_count, int frame_count, - int sync_mode, - int dma_trigger, int src_or_dst_synch); -extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, - u32 color); -extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); -extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); - -extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start, - int src_ei, int src_fi); -extern void omap_set_dma_src_index(int lch, int eidx, int fidx); -extern void omap_set_dma_src_data_pack(int lch, int enable); -extern void omap_set_dma_src_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start, - int dst_ei, int dst_fi); -extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); -extern void omap_set_dma_dest_data_pack(int lch, int enable); -extern void omap_set_dma_dest_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params *params); - -extern void omap_dma_link_lch(int lch_head, int lch_queue); -extern void omap_dma_unlink_lch(int lch_head, int lch_queue); - -extern int omap_set_dma_callback(int lch, - void (*callback)(int lch, u16 ch_status, void *data), - void *data); -extern dma_addr_t omap_get_dma_src_pos(int lch); -extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern void omap_clear_dma(int lch); -extern int omap_get_dma_active_status(int lch); -extern int omap_dma_running(void); -extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, - int tparams); -extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, - unsigned char write_prio); -extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); -extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); -extern int omap_get_dma_index(int lch, int *ei, int *fi); - -/* Chaining APIs */ -#ifndef CONFIG_ARCH_OMAP1 -extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int lch, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, - int chain_mode, - struct omap_dma_channel_params params); -extern int omap_free_dma_chain(int chain_id); -extern int omap_dma_chain_a_transfer(int chain_id, int src_start, - int dest_start, int elem_count, - int frame_count, void *callbk_data); -extern int omap_start_dma_chain_transfers(int chain_id); -extern int omap_stop_dma_chain_transfers(int chain_id); -extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); -extern int omap_get_dma_chain_dst_pos(int chain_id); -extern int omap_get_dma_chain_src_pos(int chain_id); - -extern int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params); -extern int omap_dma_chain_status(int chain_id); -#endif - -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h deleted file mode 100644 index 20f1054c0a80..000000000000 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/dmtimer.h - * - * OMAP Dual-Mode Timers - * - * Copyright (C) 2005 Nokia Corporation - * Author: Lauri Leukkunen - * PWM and clock framwork support by Timo Teras. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_DMTIMER_H -#define __ASM_ARCH_DMTIMER_H - -/* clock sources */ -#define OMAP_TIMER_SRC_SYS_CLK 0x00 -#define OMAP_TIMER_SRC_32_KHZ 0x01 -#define OMAP_TIMER_SRC_EXT_CLK 0x02 - -/* timer interrupt enable bits */ -#define OMAP_TIMER_INT_CAPTURE (1 << 2) -#define OMAP_TIMER_INT_OVERFLOW (1 << 1) -#define OMAP_TIMER_INT_MATCH (1 << 0) - -/* trigger types */ -#define OMAP_TIMER_TRIGGER_NONE 0x00 -#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 -#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 - -struct omap_dm_timer; -struct clk; - -int omap_dm_timer_init(void); - -struct omap_dm_timer *omap_dm_timer_request(void); -struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); -void omap_dm_timer_free(struct omap_dm_timer *timer); -void omap_dm_timer_enable(struct omap_dm_timer *timer); -void omap_dm_timer_disable(struct omap_dm_timer *timer); - -int omap_dm_timer_get_irq(struct omap_dm_timer *timer); - -u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); -struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); - -void omap_dm_timer_trigger(struct omap_dm_timer *timer); -void omap_dm_timer_start(struct omap_dm_timer *timer); -void omap_dm_timer_stop(struct omap_dm_timer *timer); - -int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); - -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); - -unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); -unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); - -int omap_dm_timers_active(void); - - -#endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h deleted file mode 100644 index da97736f3efa..000000000000 --- a/arch/arm/plat-omap/include/mach/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h deleted file mode 100644 index f1864a652f7a..000000000000 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) -extern void omap1510_fpga_init_irq(void); -#else -#define omap1510_fpga_init_irq() (0) -#endif - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h deleted file mode 100644 index 10da0e07c0cf..000000000000 --- a/arch/arm/plat-omap/include/mach/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h deleted file mode 100644 index b64fbee4d567..000000000000 --- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpmc-smc91x.h - * - * Copyright (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ - -#define GPMC_TIMINGS_SMC91C96 (1 << 4) -#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ -#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ -#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ - -struct omap_smc91x_platform_data { - int cs; - int gpio_irq; - int gpio_pwrdwn; - int gpio_reset; - int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ - u32 flags; - int (*retime)(void); -}; - -#if defined(CONFIG_SMC91X) || \ - defined(CONFIG_SMC91X_MODULE) - -extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); - -#else - -#define board_smc91x_data NULL - -static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h deleted file mode 100644 index 9c99cda77ba6..000000000000 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * General-Purpose Memory Controller for OMAP2 - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -/* Maximum Number of Chip Selects */ -#define GPMC_CS_NUM 8 - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -#define GPMC_CONFIG 0x50 -#define GPMC_STATUS 0x54 - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) - -/* - * Note that all values in this struct are in nanoseconds, while - * the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode */ - u16 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ - - /* The following are only on OMAP3430 */ - u16 wr_access; /* WRACCESSTIME */ - u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ -}; - -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int dma_mode, - unsigned int u32_count, int is_write); -extern void gpmc_prefetch_reset(void); -extern int gpmc_prefetch_status(void); -extern void __init gpmc_init(void); - -#endif diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h deleted file mode 100644 index 886248d32b49..000000000000 --- a/arch/arm/plat-omap/include/mach/hwa742.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h deleted file mode 100644 index 46d41ac83dbf..000000000000 --- a/arch/arm/plat-omap/include/mach/iommu.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * omap iommu: main structures - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU_H -#define __MACH_IOMMU_H - -struct iotlb_entry { - u32 da; - u32 pa; - u32 pgsz, prsvd, valid; - union { - u16 ap; - struct { - u32 endian, elsz, mixed; - }; - }; -}; - -struct iommu { - const char *name; - struct module *owner; - struct clk *clk; - void __iomem *regbase; - struct device *dev; - - unsigned int refcount; - struct mutex iommu_lock; /* global for this whole object */ - - /* - * We don't change iopgd for a situation like pgd for a task, - * but share it globally for each iommu. - */ - u32 *iopgd; - spinlock_t page_table_lock; /* protect iopgd */ - - int nr_tlb_entries; - - struct list_head mmap; - struct mutex mmap_lock; /* protect mmap */ - - int (*isr)(struct iommu *obj); - - void *ctx; /* iommu context: registres saved area */ -}; - -struct cr_regs { - union { - struct { - u16 cam_l; - u16 cam_h; - }; - u32 cam; - }; - union { - struct { - u16 ram_l; - u16 ram_h; - }; - u32 ram; - }; -}; - -struct iotlb_lock { - short base; - short vict; -}; - -/* architecture specific functions */ -struct iommu_functions { - unsigned long version; - - int (*enable)(struct iommu *obj); - void (*disable)(struct iommu *obj); - u32 (*fault_isr)(struct iommu *obj, u32 *ra); - - void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); - - struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); - int (*cr_valid)(struct cr_regs *cr); - u32 (*cr_to_virt)(struct cr_regs *cr); - void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); - - u32 (*get_pte_attr)(struct iotlb_entry *e); - - void (*save_ctx)(struct iommu *obj); - void (*restore_ctx)(struct iommu *obj); - ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len); -}; - -struct iommu_platform_data { - const char *name; - const char *clk_name; - const int nr_tlb_entries; -}; - -#if defined(CONFIG_ARCH_OMAP1) -#error "iommu for this processor not implemented yet" -#else -#include -#endif - -/* - * utilities for super page(16MB, 1MB, 64KB and 4KB) - */ - -#define iopgsz_max(bytes) \ - (((bytes) >= SZ_16M) ? SZ_16M : \ - ((bytes) >= SZ_1M) ? SZ_1M : \ - ((bytes) >= SZ_64K) ? SZ_64K : \ - ((bytes) >= SZ_4K) ? SZ_4K : 0) - -#define bytes_to_iopgsz(bytes) \ - (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ - ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ - ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ - ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) - -#define iopgsz_to_bytes(iopgsz) \ - (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ - ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ - ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ - ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) - -#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) - -/* - * global functions - */ -extern u32 iommu_arch_version(void); - -extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); -extern u32 iotlb_cr_to_virt(struct cr_regs *cr); - -extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); -extern void flush_iotlb_page(struct iommu *obj, u32 da); -extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); -extern void flush_iotlb_all(struct iommu *obj); - -extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); -extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); - -extern struct iommu *iommu_get(const char *name); -extern void iommu_put(struct iommu *obj); - -extern void iommu_save_ctx(struct iommu *obj); -extern void iommu_restore_ctx(struct iommu *obj); - -extern int install_iommu_arch(const struct iommu_functions *ops); -extern void uninstall_iommu_arch(const struct iommu_functions *ops); - -extern int foreach_iommu_device(void *data, - int (*fn)(struct device *, void *)); - -extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len); -extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len); - -#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h deleted file mode 100644 index 10ad05f410e9..000000000000 --- a/arch/arm/plat-omap/include/mach/iommu2.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * omap iommu: omap2 architecture specific definitions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU2_H -#define __MACH_IOMMU2_H - -#include - -/* - * MMU Register offsets - */ -#define MMU_REVISION 0x00 -#define MMU_SYSCONFIG 0x10 -#define MMU_SYSSTATUS 0x14 -#define MMU_IRQSTATUS 0x18 -#define MMU_IRQENABLE 0x1c -#define MMU_WALKING_ST 0x40 -#define MMU_CNTL 0x44 -#define MMU_FAULT_AD 0x48 -#define MMU_TTB 0x4c -#define MMU_LOCK 0x50 -#define MMU_LD_TLB 0x54 -#define MMU_CAM 0x58 -#define MMU_RAM 0x5c -#define MMU_GFLUSH 0x60 -#define MMU_FLUSH_ENTRY 0x64 -#define MMU_READ_CAM 0x68 -#define MMU_READ_RAM 0x6c -#define MMU_EMU_FAULT_AD 0x70 - -#define MMU_REG_SIZE 256 - -/* - * MMU Register bit definitions - */ -#define MMU_LOCK_BASE_SHIFT 10 -#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) -#define MMU_LOCK_BASE(x) \ - ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) - -#define MMU_LOCK_VICT_SHIFT 4 -#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) -#define MMU_LOCK_VICT(x) \ - ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) - -#define MMU_CAM_VATAG_SHIFT 12 -#define MMU_CAM_VATAG_MASK \ - ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) -#define MMU_CAM_P (1 << 3) -#define MMU_CAM_V (1 << 2) -#define MMU_CAM_PGSZ_MASK 3 -#define MMU_CAM_PGSZ_1M (0 << 0) -#define MMU_CAM_PGSZ_64K (1 << 0) -#define MMU_CAM_PGSZ_4K (2 << 0) -#define MMU_CAM_PGSZ_16M (3 << 0) - -#define MMU_RAM_PADDR_SHIFT 12 -#define MMU_RAM_PADDR_MASK \ - ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) -#define MMU_RAM_ENDIAN_SHIFT 9 -#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ELSZ_SHIFT 7 -#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_MIXED_SHIFT 6 -#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) -#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK - -/* - * register accessors - */ -static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) -{ - return __raw_readl(obj->regbase + offs); -} - -static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) -{ - __raw_writel(val, obj->regbase + offs); -} - -#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h deleted file mode 100644 index bdc7ce5d7a4a..000000000000 --- a/arch/arm/plat-omap/include/mach/iovmm.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * omap iommu: simple virtual address space management - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOMMU_MMAP_H -#define __IOMMU_MMAP_H - -struct iovm_struct { - struct iommu *iommu; /* iommu object which this belongs to */ - u32 da_start; /* area definition */ - u32 da_end; - u32 flags; /* IOVMF_: see below */ - struct list_head list; /* linked in ascending order */ - const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ - void *va; /* mpu side mapped address */ -}; - -/* - * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) - * - * lower 16 bit is used for h/w and upper 16 bit is for s/w. - */ -#define IOVMF_SW_SHIFT 16 -#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) -#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) -#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL - -/* - * iovma: h/w flags derived from cam and ram attribute - */ -#define IOVMF_CAM_MASK (~((1 << 10) - 1)) -#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) - -#define IOVMF_PGSZ_MASK (3 << 0) -#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M -#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K -#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K -#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M - -#define IOVMF_ENDIAN_MASK (1 << 9) -#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG -#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE - -#define IOVMF_ELSZ_MASK (3 << 7) -#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 -#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 -#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 -#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE - -#define IOVMF_MIXED_MASK (1 << 6) -#define IOVMF_MIXED MMU_RAM_MIXED - -/* - * iovma: s/w flags, used for mapping and umapping internally. - */ -#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) - -/* "superpages" is supported just with physically linear pages */ -#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) - -#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) -#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT)) -#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT)) - - -extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); -extern u32 iommu_vmap(struct iommu *obj, u32 da, - const struct sg_table *sgt, u32 flags); -extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); -extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_vfree(struct iommu *obj, const u32 da); -extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, - u32 flags); -extern void iommu_kunmap(struct iommu *obj, u32 da); -extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, - u32 flags); -extern void iommu_kfree(struct iommu *obj, u32 da); - -extern void *da_to_va(struct iommu *obj, u32 da); - -#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h deleted file mode 100644 index 40f60339d1c6..000000000000 --- a/arch/arm/plat-omap/include/mach/irda.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irda.h - * - * Copyright (C) 2005-2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_SEL 1 /* Selects IrDA */ -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 -#define IR_MIRMODE 8 - -struct omap_irda_config { - int transceiver_cap; - int (*transceiver_mode)(struct device *dev, int mode); - int (*select_irda)(struct device *dev, int state); - int rx_channel; - int tx_channel; - unsigned long dest_start; - unsigned long src_start; - int tx_trigger; - int rx_trigger; - int mode; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h deleted file mode 100644 index d91b9be334ff..000000000000 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/keypad.h - * - * Copyright (C) 2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H - -#include - -struct omap_kp_platform_data { - int rows; - int cols; - int *keymap; - unsigned int keymapsize; - unsigned int rep:1; - unsigned long delay; - unsigned int dbounce:1; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; -}; - -/* Group (0..3) -- when multiple keys are pressed, only the - * keys pressed in the same group are considered as pressed. This is - * in order to workaround certain crappy HW designs that produce ghost - * keypresses. */ -#define GROUP_0 (0 << 16) -#define GROUP_1 (1 << 16) -#define GROUP_2 (2 << 16) -#define GROUP_3 (3 << 16) -#define GROUP_MASK GROUP_3 - -#define KEY_PERSISTENT 0x00800000 -#define KEYNUM_MASK 0x00EFFFFF - -#endif - diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h deleted file mode 100644 index 8e52c6572281..000000000000 --- a/arch/arm/plat-omap/include/mach/lcd_mipid.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __LCD_MIPID_H -#define __LCD_MIPID_H - -enum mipid_test_num { - MIPID_TEST_RGB_LINES, -}; - -enum mipid_test_result { - MIPID_TEST_SUCCESS, - MIPID_TEST_INVALID, - MIPID_TEST_FAILED, -}; - -#ifdef __KERNEL__ - -struct mipid_platform_data { - int nreset_gpio; - int data_lines; - - void (*shutdown)(struct mipid_platform_data *pdata); - void (*set_bklight_level)(struct mipid_platform_data *pdata, - int level); - int (*get_bklight_level)(struct mipid_platform_data *pdata); - int (*get_bklight_max)(struct mipid_platform_data *pdata); -}; - -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h deleted file mode 100644 index 25e451e7e2fd..000000000000 --- a/arch/arm/plat-omap/include/mach/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h deleted file mode 100644 index b7a6991814ec..000000000000 --- a/arch/arm/plat-omap/include/mach/mailbox.h +++ /dev/null @@ -1,96 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include -#include -#include - -typedef u32 mbox_msg_t; -typedef void (mbox_receiver_t)(mbox_msg_t msg); -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - /* ctx */ - void (*save_ctx)(struct omap_mbox *mbox); - void (*restore_ctx)(struct omap_mbox *mbox); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct request_queue *queue; - struct work_struct work; - int (*callback)(void *); - struct omap_mbox *mbox; -}; - -struct omap_mbox { - char *name; - unsigned int irq; - - struct omap_mbox_queue *txq, *rxq; - - struct omap_mbox_ops *ops; - - mbox_msg_t seq_snd, seq_rcv; - - struct device *dev; - - struct omap_mbox *next; - void *priv; - - void (*err_notify)(void); -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *); -void omap_mbox_put(struct omap_mbox *); - -int omap_mbox_register(struct device *parent, struct omap_mbox *); -int omap_mbox_unregister(struct omap_mbox *); - -static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->save_ctx) { - dev_err(mbox->dev, "%s:\tno save\n", __func__); - return; - } - - mbox->ops->save_ctx(mbox); -} - -static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->restore_ctx) { - dev_err(mbox->dev, "%s:\tno restore\n", __func__); - return; - } - - mbox->ops->restore_ctx(mbox); -} - -#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h deleted file mode 100644 index 7e9cae3e3d15..000000000000 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ /dev/null @@ -1,462 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mcbsp.h - * - * Defines for Multi-Channel Buffered Serial Port - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H - -#include -#include - -#include -#include - -#define OMAP7XX_MCBSP1_BASE 0xfffb1000 -#define OMAP7XX_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#define OMAP24XX_MCBSP1_BASE 0x48074000 -#define OMAP24XX_MCBSP2_BASE 0x48076000 -#define OMAP2430_MCBSP3_BASE 0x4808c000 -#define OMAP2430_MCBSP4_BASE 0x4808e000 -#define OMAP2430_MCBSP5_BASE 0x48096000 - -#define OMAP34XX_MCBSP1_BASE 0x48074000 -#define OMAP34XX_MCBSP2_BASE 0x49022000 -#define OMAP34XX_MCBSP3_BASE 0x49024000 -#define OMAP34XX_MCBSP4_BASE 0x49026000 -#define OMAP34XX_MCBSP5_BASE 0x48096000 - -#define OMAP44XX_MCBSP1_BASE 0x49022000 -#define OMAP44XX_MCBSP2_BASE 0x49024000 -#define OMAP44XX_MCBSP3_BASE 0x49026000 -#define OMAP44XX_MCBSP4_BASE 0x48074000 - -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -/* Dummy defines, these are not available on omap1 */ -#define OMAP_MCBSP_REG_XCCR 0x00 -#define OMAP_MCBSP_REG_RCCR 0x00 - -#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP1 -#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX -#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX - -#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_DRR 0x00 -#define OMAP_MCBSP_REG_DXR 0x08 -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 -#define OMAP_MCBSP_REG_SYSCON 0x8C -#define OMAP_MCBSP_REG_THRSH2 0x90 -#define OMAP_MCBSP_REG_THRSH1 0x94 -#define OMAP_MCBSP_REG_IRQST 0xA0 -#define OMAP_MCBSP_REG_IRQEN 0xA4 -#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 -#define OMAP_MCBSP_REG_XCCR 0xAC -#define OMAP_MCBSP_REG_RCCR 0xB0 - -#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP2 -#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX -#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX - -#endif - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define ALB 0x8000 -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/*********************** McBSP XCCR bit definitions *************************/ -#define EXTCLKGATE 0x8000 -#define PPCONNECT 0x4000 -#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ -#define XFULL_CYCLE 0x0800 -#define DILB 0x0020 -#define XDMAEN 0x0008 -#define XDISABLE 0x0001 - -/********************** McBSP RCCR bit definitions *************************/ -#define RFULL_CYCLE 0x0800 -#define RDMAEN 0x0008 -#define RDISABLE 0x0001 - -/********************** McBSP SYSCONFIG bit definitions ********************/ -#define CLOCKACTIVITY(value) ((value)<<8) -#define SIDLEMODE(value) ((value)<<3) -#define ENAWAKEUP 0x0004 -#define SOFTRST 0x0002 - -/********************** McBSP DMA operating modes **************************/ -#define MCBSP_DMA_MODE_ELEMENT 0 -#define MCBSP_DMA_MODE_THRESHOLD 1 -#define MCBSP_DMA_MODE_FRAME 2 - -/********************** McBSP WAKEUPEN bit definitions *********************/ -#define XEMPTYEOFEN 0x4000 -#define XRDYEN 0x0400 -#define XEOFEN 0x0200 -#define XFSXEN 0x0100 -#define XSYNCERREN 0x0080 -#define RRDYEN 0x0008 -#define REOFEN 0x0004 -#define RFSREN 0x0002 -#define RSYNCERREN 0x0001 - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; - u16 xccr; - u16 rccr; -}; - -typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, - OMAP_MCBSP4, - OMAP_MCBSP5 -} omap_mcbsp_id; - -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - -/* Platform specific configuration */ -struct omap_mcbsp_ops { - void (*request)(unsigned int); - void (*free)(unsigned int); -}; - -struct omap_mcbsp_platform_data { - unsigned long phys_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; - struct omap_mcbsp_ops *ops; -#ifdef CONFIG_ARCH_OMAP34XX - u16 buffer_size; -#endif -}; - -struct omap_mcbsp { - struct device *dev; - unsigned long phys_base; - void __iomem *io_base; - u8 id; - u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; - - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - short dma_rx_lch; - u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *iclk; - struct clk *fclk; -#ifdef CONFIG_ARCH_OMAP34XX - int dma_op_mode; - u16 max_tx_thres; - u16 max_rx_thres; -#endif -}; -extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count; - -int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -#ifdef CONFIG_ARCH_OMAP34XX -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); -int omap_mcbsp_get_dma_op_mode(unsigned int id); -#else -static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ } -static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ } -static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } -static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } -#endif -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id, int tx, int rx); -void omap_mcbsp_stop(unsigned int id, int tx, int rx); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - - -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); - -#endif diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h deleted file mode 100644 index 1254e4945b6f..000000000000 --- a/arch/arm/plat-omap/include/mach/mcspi.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _OMAP2_MCSPI_H -#define _OMAP2_MCSPI_H - -struct omap2_mcspi_platform_config { - unsigned short num_cs; -}; - -struct omap2_mcspi_device_config { - unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h deleted file mode 100644 index 3122bf68c7ce..000000000000 --- a/arch/arm/plat-omap/include/mach/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h deleted file mode 100644 index 7229b9593301..000000000000 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include -#include -#include - -#include - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP34XX_NR_MMC 3 -#define OMAP44XX_NR_MMC 5 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP3_HSMMC_SIZE 0x200 -#define OMAP4_HSMMC_SIZE 0x1000 -#define OMAP2_MMC1_BASE 0x4809c000 -#define OMAP2_MMC2_BASE 0x480b4000 -#define OMAP3_MMC3_BASE 0x480ad000 -#define OMAP4_MMC4_BASE 0x480d1000 -#define OMAP4_MMC5_BASE 0x480d5000 -#define OMAP4_MMC_REG_OFFSET 0x100 -#define HSMMC5 (1 << 4) -#define HSMMC4 (1 << 3) -#define HSMMC3 (1 << 2) -#define HSMMC2 (1 << 1) -#define HSMMC1 (1 << 0) - -#define OMAP_MMC_MAX_SLOTS 2 - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (* switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (* init)(struct device *dev); - void (* cleanup)(struct device *dev); - void (* shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - u64 dma_mask; - - struct omap_mmc_slot_data { - - /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; - * 8 wire signaling is also optional, and is used with HSMMC - */ - u8 wires; - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (* set_power)(struct device *dev, int slot, int power_on, int vdd); - int (* get_ro)(struct device *dev, int slot); - int (*set_sleep)(struct device *dev, int slot, int sleep, - int vdd, int cardsleep); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (* get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (* card_detect)(int irq); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data) -{ - return 0; -} - -#endif -#endif diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h deleted file mode 100644 index f3c1d8a90456..000000000000 --- a/arch/arm/plat-omap/include/mach/mux.h +++ /dev/null @@ -1,864 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ - .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is is in the same register - * as mux config - */ -#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_7XX(mux_reg, mode_offset, mode) \ - PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - -/* 24xx/34xx mux bit defines */ -#define OMAP2_PULL_ENA (1 << 3) -#define OMAP2_PULL_UP (1 << 4) -#define OMAP2_ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - -struct pin_config { - char *name; - const unsigned int mux_reg; - unsigned char debug; - -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; -#endif - -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - const char *mux_reg_name; -#endif - -}; - -enum omap7xx_index { - /* OMAP 730 keyboard */ - E2_7XX_KBR0, - J7_7XX_KBR1, - E1_7XX_KBR2, - F3_7XX_KBR3, - D2_7XX_KBR4, - C2_7XX_KBC0, - D3_7XX_KBC1, - E4_7XX_KBC2, - F4_7XX_KBC3, - E3_7XX_KBC4, - - /* USB */ - AA17_7XX_USB_DM, - W16_7XX_USB_PU_EN, - W17_7XX_USB_VBUSI, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AD6_2430_MCBSP_CLKS, - - AB2_2430_MCBSP1_CLKR, - AD5_2430_MCBSP1_FSR, - AA1_2430_MCBSP1_DX, - AF3_2430_MCBSP1_DR, - AB3_2430_MCBSP1_FSX, - Y9_2430_MCBSP1_CLKX, - - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - - AC9_2430_MCBSP3_CLKX, - AE4_2430_MCBSP3_FSX, - AE2_2430_MCBSP3_DR, - AF4_2430_MCBSP3_DX, - - N3_2430_MCBSP4_CLKX, - AD23_2430_MCBSP4_DR, - AB25_2430_MCBSP4_DX, - AC25_2430_MCBSP4_FSX, - - AE16_2430_MCBSP5_CLKX, - AF12_2430_MCBSP5_FSX, - K7_2430_MCBSP5_DX, - M1_2430_MCBSP5_DR, - - /* 2430 McSPI*/ - Y18_2430_MCSPI1_CLK, - AD15_2430_MCSPI1_SIMO, - AE17_2430_MCSPI1_SOMI, - U1_2430_MCSPI1_CS0, - - /* Touchscreen GPIO */ - AF19_2430_GPIO_85, - -}; - -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap2_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h deleted file mode 100644 index 631a7bed1eef..000000000000 --- a/arch/arm/plat-omap/include/mach/nand.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/nand.h - * - * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -struct omap_nand_platform_data { - unsigned int options; - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*nand_setup)(void __iomem *); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; -}; diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h deleted file mode 100644 index bdf30a0f87f2..000000000000 --- a/arch/arm/plat-omap/include/mach/omap-alsa.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap-alsa.h - * - * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. - * - * Copyright (C) 2006 Mika Laitio - * - * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil - * Written by Daniel Petrini, David Cohen, Anderson Briglia - * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History - * ------- - * - * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, - * original version based in sa1100 driver - * and omap oss driver. - */ - -#ifndef __OMAP_ALSA_H -#define __OMAP_ALSA_H - -#include -#include -#include -#include -#include - -#define DMA_BUF_SIZE (1024 * 8) - -/* - * Buffer management for alsa and dma - */ -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - int dma_dev; /* dma number of that device */ - int *lch; /* Chain of channels this stream is linked to */ - char started; /* to store if the chain was started or not */ - int dma_q_head; /* DMA Channel Q Head */ - int dma_q_tail; /* DMA Channel Q Tail */ - char dma_q_count; /* DMA Channel Q Count */ - int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - spinlock_t dma_lock; /* for locking in DMA operations */ - struct snd_pcm_substream *stream; /* the pcm stream */ - unsigned linked:1; /* dma channels linked */ - int offset; /* store start position of the last period in the alsa buffer */ - int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ - int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ -}; - -/* - * Alsa card structure for aic23 - */ -struct snd_card_omap_codec { - struct snd_card *card; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -/* Codec specific information and function pointers. - * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) - * are responsible for defining the function pointers. - */ -struct omap_alsa_codec_config { - char *name; - struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; - struct snd_pcm_hw_constraint_list *hw_constraints_rates; - struct snd_pcm_hardware *snd_omap_alsa_playback; - struct snd_pcm_hardware *snd_omap_alsa_capture; - void (*codec_configure_dev)(void); - void (*codec_set_samplerate)(long); - void (*codec_clock_setup)(void); - int (*codec_clock_on)(void); - int (*codec_clock_off)(void); - int (*get_default_samplerate)(void); -}; - -/*********** Mixer function prototypes *************************/ -int snd_omap_mixer(struct snd_card_omap_codec *); -void snd_omap_init_mixer(void); - -#ifdef CONFIG_PM -void snd_omap_suspend_mixer(void); -void snd_omap_resume_mixer(void); -#endif - -int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); -int snd_omap_alsa_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); -int snd_omap_alsa_resume(struct platform_device *pdev); -#else -#define snd_omap_alsa_suspend NULL -#define snd_omap_alsa_resume NULL -#endif - -void callback_omap_alsa_sound_dma(void *); - -#endif diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h deleted file mode 100644 index 3ee41d711492..000000000000 --- a/arch/arm/plat-omap/include/mach/omap-pm.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * omap-pm.h - OMAP power management interface - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): Karthik Dasu, Jouni - * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, - * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, - * Richard Woodruff - */ - -#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H -#define ASM_ARM_ARCH_OMAP_OMAP_PM_H - -#include -#include - -#include "powerdomain.h" - -/** - * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU - * @rate: target clock rate - * @opp_id: OPP ID - * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP - * - * Operating performance point data. Can vary by OMAP chip and board. - */ -struct omap_opp { - unsigned long rate; - u8 opp_id; - u16 min_vdd; -}; - -extern struct omap_opp *mpu_opps; -extern struct omap_opp *dsp_opps; -extern struct omap_opp *l3_opps; - -/* - * agent_id values for use with omap_pm_set_min_bus_tput(): - * - * OCP_INITIATOR_AGENT is only valid for devices that can act as - * initiators -- it represents the device's L3 interconnect - * connection. OCP_TARGET_AGENT represents the device's L4 - * interconnect connection. - */ -#define OCP_TARGET_AGENT 1 -#define OCP_INITIATOR_AGENT 2 - -/** - * omap_pm_if_early_init - OMAP PM init code called before clock fw init - * @mpu_opp_table: array ptr to struct omap_opp for MPU - * @dsp_opp_table: array ptr to struct omap_opp for DSP - * @l3_opp_table : array ptr to struct omap_opp for CORE - * - * Initialize anything that must be configured before the clock - * framework starts. The "_if_" is to avoid name collisions with the - * PM idle-loop code. - */ -int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table, - struct omap_opp *dsp_opp_table, - struct omap_opp *l3_opp_table); - -/** - * omap_pm_if_init - OMAP PM init code called after clock fw init - * - * The main initialization code. OPP tables are passed in here. The - * "_if_" is to avoid name collisions with the PM idle-loop code. - */ -int __init omap_pm_if_init(void); - -/** - * omap_pm_if_exit - OMAP PM exit code - * - * Exit code; currently unused. The "_if_" is to avoid name - * collisions with the PM idle-loop code. - */ -void omap_pm_if_exit(void); - -/* - * Device-driver-originated constraints (via board-*.c files, platform_data) - */ - - -/** - * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency - * @dev: struct device * requesting the constraint - * @t: maximum MPU wakeup latency in microseconds - * - * Request that the maximum interrupt latency for the MPU to be no - * greater than 't' microseconds. "Interrupt latency" in this case is - * defined as the elapsed time from the occurrence of a hardware or - * timer interrupt to the time when the device driver's interrupt - * service routine has been entered by the MPU. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the MPU powerdomain into, and - * possibly the CORE powerdomain as well, since interrupt handling - * code currently runs from SDRAM. Advanced PM or board*.c code may - * also configure interrupt controller priorities, OCP bus priorities, - * CPU speed(s), etc. - * - * This function will not affect device wakeup latency, e.g., time - * elapsed from when a device driver enables a hardware device with - * clk_enable(), to when the device is ready for register access or - * other use. To control this device wakeup latency, use - * set_max_dev_wakeup_lat() - * - * Multiple calls to set_max_mpu_wakeup_lat() will replace the - * previous t value. To remove the latency target for the MPU, call - * with t = -1. - * - * No return value. - */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device - * @dev: struct device * requesting the constraint - * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) - * @r: minimum throughput (in KiB/s) - * - * Request that the minimum data throughput on the OCP interconnect - * attached to device 'dev' interconnect agent 'tbus_id' be no less - * than 'r' KiB/s. - * - * It is expected that the OMAP PM or bus code will use this - * information to set the interconnect clock to run at the lowest - * possible speed that satisfies all current system users. The PM or - * bus code will adjust the estimate based on its model of the bus, so - * device driver authors should attempt to specify an accurate - * quantity for their device use case, and let the PM or bus code - * overestimate the numbers as necessary to handle request/response - * latency, other competing users on the system, etc. On OMAP2/3, if - * a driver requests a minimum L4 interconnect speed constraint, the - * code will also need to add an minimum L3 interconnect speed - * constraint, - * - * Multiple calls to set_min_bus_tput() will replace the previous rate - * value for this device. To remove the interconnect throughput - * restriction for this device, call with r = 0. - * - * No return value. - */ -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); - - -/** - * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @dev: struct device * - * @t: maximum device wakeup latency in microseconds - * - * Request that the maximum amount of time necessary for a device to - * become accessible after its clocks are enabled should be no greater - * than 't' microseconds. Specifically, this represents the time from - * when a device driver enables device clocks with clk_enable(), to - * when the register reads and writes on the device will succeed. - * This function should be called before clk_disable() is called, - * since the power state transition decision may be made during - * clk_disable(). - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the powerdomain enclosing this - * device into. - * - * Multiple calls to set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the wakeup - * latency restriction for this device, call with t = -1. - * - * No return value. - */ -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency - * @dev: struct device * - * @t: maximum DMA transfer start latency in microseconds - * - * Request that the maximum system DMA transfer start latency for this - * device 'dev' should be no greater than 't' microseconds. "DMA - * transfer start latency" here is defined as the elapsed time from - * when a device (e.g., McBSP) requests that a system DMA transfer - * start or continue, to the time at which data starts to flow into - * that device from the system DMA controller. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the CORE powerdomain into. - * - * Since system DMA transfers may not involve the MPU, this function - * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do - * so. Similarly, this function will not affect device wakeup latency - * -- use set_max_dev_wakeup_lat() to affect that. - * - * Multiple calls to set_max_sdma_lat() will replace the previous t - * value for this device. To remove the maximum DMA latency for this - * device, call with t = -1. - * - * No return value. - */ -void omap_pm_set_max_sdma_lat(struct device *dev, long t); - - -/* - * DSP Bridge-specific constraints - */ - -/** - * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table - * - * Intended for use by DSPBridge. Returns an array of OPP->DSP clock - * frequency entries. The final item in the array should have .rate = - * .opp_id = 0. - */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void); - -/** - * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge - * @opp_id: target DSP OPP ID - * - * Set a minimum OPP ID for the DSP. This is intended to be called - * only from the DSP Bridge MPU-side driver. Unfortunately, the only - * information that code receives from the DSP/BIOS load estimator is the - * target OPP ID; hence, this interface. No return value. - */ -void omap_pm_dsp_set_min_opp(u8 opp_id); - -/** - * omap_pm_dsp_get_opp - report the current DSP OPP ID - * - * Report the current OPP for the DSP. Since on OMAP3, the DSP and - * MPU share a single voltage domain, the OPP ID returned back may - * represent a higher DSP speed than the OPP requested via - * omap_pm_dsp_set_min_opp(). - * - * Returns the current VDD1 OPP ID, or 0 upon error. - */ -u8 omap_pm_dsp_get_opp(void); - - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -/** - * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr - * - * Provide a frequency table usable by CPUFreq for the current chip/board. - * Returns a pointer to a struct cpufreq_frequency_table array or NULL - * upon error. - */ -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); - -/** - * omap_pm_cpu_set_freq - set the current minimum MPU frequency - * @f: MPU frequency in Hz - * - * Set the current minimum CPU frequency. The actual CPU frequency - * used could end up higher if the DSP requested a higher OPP. - * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No - * return value. - */ -void omap_pm_cpu_set_freq(unsigned long f); - -/** - * omap_pm_cpu_get_freq - report the current CPU frequency - * - * Returns the current MPU frequency, or 0 upon error. - */ -unsigned long omap_pm_cpu_get_freq(void); - - -/* - * Device context loss tracking - */ - -/** - * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx - * @dev: struct device * - * - * This function returns the number of times that the device @dev has - * lost its internal context. This generally occurs on a powerdomain - * transition to OFF. Drivers use this as an optimization to avoid restoring - * context if the device hasn't lost it. To use, drivers should initially - * call this in their context save functions and store the result. Early in - * the driver's context restore function, the driver should call this function - * again, and compare the result to the stored counter. If they differ, the - * driver must restore device context. If the number of context losses - * exceeds the maximum positive integer, the function will wrap to 0 and - * continue counting. Returns the number of context losses for this device, - * or -EINVAL upon error. - */ -int omap_pm_get_dev_context_loss_count(struct device *dev); - - -#endif diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h deleted file mode 100644 index d24004668138..000000000000 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ /dev/null @@ -1,50 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap1510.h - * - * Hardware definitions for TI OMAP1510 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP15XX_H -#define __ASM_ARCH_OMAP15XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP1510_DSP_BASE 0xE0000000 -#define OMAP1510_DSP_SIZE 0x28000 -#define OMAP1510_DSP_START 0xE0000000 - -#define OMAP1510_DSPREG_BASE 0xE1000000 -#define OMAP1510_DSPREG_SIZE SZ_128K -#define OMAP1510_DSPREG_START 0xE1000000 - -#define OMAP1510_DSP_MMU_BASE (0xfffed200) - -#endif /* __ASM_ARCH_OMAP15XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h deleted file mode 100644 index 0e69b504c25f..000000000000 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap16xx.h - * - * Hardware definitions for TI OMAP1610/5912/1710 processors. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP16XX_H -#define __ASM_ARCH_OMAP16XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP16XX_DSP_BASE 0xE0000000 -#define OMAP16XX_DSP_SIZE 0x28000 -#define OMAP16XX_DSP_START 0xE0000000 - -#define OMAP16XX_DSPREG_BASE 0xE1000000 -#define OMAP16XX_DSPREG_SIZE SZ_128K -#define OMAP16XX_DSPREG_START 0xE1000000 - -#define OMAP16XX_SEC_BASE 0xFFFE4000 -#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) -#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) -#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#define OMAP_IH2_0_BASE (0xfffe0000) -#define OMAP_IH2_1_BASE (0xfffe0100) -#define OMAP_IH2_2_BASE (0xfffe0200) -#define OMAP_IH2_3_BASE (0xfffe0300) - -#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) -#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) -#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) -#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) -#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) -#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) -#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) - -#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) -#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) -#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) -#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) -#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) -#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) -#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) - -#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) -#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) -#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) -#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) -#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) -#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) -#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) - -#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) -#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) -#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) -#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) -#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) -#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) -#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* - * ---------------------------------------------------------------------------- - * Pin configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) -#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP1610_RESET_CONTROL 0xfffe1140 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_SWITCH_BASE (0xfffbc800) -#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) - -/* UART3 Registers Maping through MPU bus */ -#define UART3_RHR (OMAP_UART3_BASE + 0) -#define UART3_THR (OMAP_UART3_BASE + 0) -#define UART3_DLL (OMAP_UART3_BASE + 0) -#define UART3_IER (OMAP_UART3_BASE + 4) -#define UART3_DLH (OMAP_UART3_BASE + 4) -#define UART3_IIR (OMAP_UART3_BASE + 8) -#define UART3_FCR (OMAP_UART3_BASE + 8) -#define UART3_EFR (OMAP_UART3_BASE + 8) -#define UART3_LCR (OMAP_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) -#define UART3_LSR (OMAP_UART3_BASE + 0x14) -#define UART3_TCR (OMAP_UART3_BASE + 0x18) -#define UART3_MSR (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) -#define UART3_BLR (OMAP_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP_UART3_BASE + 0x40) -#define UART3_SSR (OMAP_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP_UART3_BASE + 0x50) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* 32-bit Watchdog timer in OMAP 16XX */ -#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) -#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) -#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) -#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) -#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) -#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) -#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) -#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) -#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) -#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) - -#define WCLR_PRE_SHIFT 5 -#define WCLR_PTV_SHIFT 2 - -#define WWPS_W_PEND_WSPR (1 << 4) -#define WWPS_W_PEND_WTGR (1 << 3) -#define WWPS_W_PEND_WLDR (1 << 2) -#define WWPS_W_PEND_WCRR (1 << 1) -#define WWPS_W_PEND_WCLR (1 << 0) - -#define WSPR_ENABLE_0 (0x0000bbbb) -#define WSPR_ENABLE_1 (0x00004444) -#define WSPR_DISABLE_0 (0x0000aaaa) -#define WSPR_DISABLE_1 (0x00005555) - -#define OMAP16XX_DSP_MMU_BASE (0xfffed200) -#define OMAP16XX_MAILBOX_BASE (0xfffcf000) - -#endif /* __ASM_ARCH_OMAP16XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h deleted file mode 100644 index 696edfc145a6..000000000000 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap24xx.h - * - * This file contains the processor specific definitions - * of the TI OMAP24XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP24XX_H -#define __ASM_ARCH_OMAP24XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. Note also that some of these defines are needed - * for omap1 to compile without adding ifdefs. - */ - -#define L4_24XX_BASE 0x48000000 -#define L4_WK_243X_BASE 0x49000000 -#define L3_24XX_BASE 0x68000000 - -/* interrupt controller */ -#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define OMAP24XX_IVA_INTC_BASE 0x40000000 - -#define OMAP2420_CTRL_BASE L4_24XX_BASE -#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_PRM_BASE OMAP2420_CM_BASE -#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP2420_SMS_BASE 0x68008000 -#define OMAP2420_GPMC_BASE 0x6800a000 - -#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_PRM_BASE OMAP2430_CM_BASE - -#define OMAP243X_SMS_BASE 0x6C000000 -#define OMAP243X_SDRC_BASE 0x6D000000 -#define OMAP243X_GPMC_BASE 0x6E000000 -#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) -#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE -#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) - -/* DSP SS */ -#define OMAP2420_DSP_BASE 0x58000000 -#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) -#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) -#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) - -#define OMAP243X_DSP_BASE 0x5C000000 -#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) -#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) - -/* Mailbox */ -#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) - -/* Camera */ -#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) - -/* Security */ -#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) -#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) -#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) -#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) -#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) -#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) - -#endif /* __ASM_ARCH_OMAP24XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h deleted file mode 100644 index f8d186a73712..000000000000 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap34xx.h - * - * This file contains the processor specific definitions of the TI OMAP34XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_OMAP34XX_H -#define __ASM_ARCH_OMAP34XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ - -#define L4_34XX_BASE 0x48000000 -#define L4_WK_34XX_BASE 0x48300000 -#define L4_PER_34XX_BASE 0x49000000 -#define L4_EMU_34XX_BASE 0x54000000 -#define L3_34XX_BASE 0x68000000 - -#define OMAP3430_32KSYNCT_BASE 0x48320000 -#define OMAP3430_CM_BASE 0x48004800 -#define OMAP3430_PRM_BASE 0x48306800 -#define OMAP343X_SMS_BASE 0x6C000000 -#define OMAP343X_SDRC_BASE 0x6D000000 -#define OMAP34XX_GPMC_BASE 0x6E000000 -#define OMAP343X_SCM_BASE 0x48002000 -#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE - -#define OMAP34XX_IC_BASE 0x48200000 - -#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000) -#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100) -#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400) -#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600) -#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00) -#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00) -#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00) -#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) -#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) -#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) -#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800) -#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970) - -#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) -#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) -#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF) -#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7) -#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047) -#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F) -#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F) -#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) -#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) -#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) -#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) -#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) - -#define OMAP34XX_IVA_INTC_BASE 0x40000000 -#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) -#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) -#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) - -#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) - -#define OMAP34XX_DSP_BASE 0x58000000 -#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) -#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) -#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) -#endif /* __ASM_ARCH_OMAP34XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h deleted file mode 100644 index 336189753671..000000000000 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ /dev/null @@ -1,44 +0,0 @@ -/*: - * Address mappings and base address for OMAP4 interconnects - * and peripherals. - * - * Copyright (C) 2009 Texas Instruments - * - * Author: Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_OMAP44XX_H -#define __ASM_ARCH_OMAP44XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ -#define L4_44XX_BASE 0x4a000000 -#define L4_WK_44XX_BASE 0x4a300000 -#define L4_PER_44XX_BASE 0x48000000 -#define L4_EMU_44XX_BASE 0x54000000 -#define L3_44XX_BASE 0x44000000 -#define OMAP44XX_EMIF1_BASE 0x4c000000 -#define OMAP44XX_EMIF2_BASE 0x4d000000 -#define OMAP44XX_DMM_BASE 0x4e000000 -#define OMAP4430_32KSYNCT_BASE 0x4a304000 -#define OMAP4430_CM_BASE 0x4a004000 -#define OMAP4430_PRM_BASE 0x48306000 -#define OMAP44XX_GPMC_BASE 0x50000000 -#define OMAP443X_SCM_BASE 0x4a002000 -#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE -#define OMAP44XX_IC_BASE 0x48200000 -#define OMAP44XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 -#define OMAP44XX_GIC_DIST_BASE 0x48241000 -#define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_WKUPGEN_BASE 0x48281000 - -#endif /* __ASM_ARCH_OMAP44XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h deleted file mode 100644 index 14272bc1a6fd..000000000000 --- a/arch/arm/plat-omap/include/mach/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h deleted file mode 100644 index 53f52414b0e9..000000000000 --- a/arch/arm/plat-omap/include/mach/omap7xx.h +++ /dev/null @@ -1,104 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap7xx.h - * - * Hardware definitions for TI OMAP7XX processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * Adapted for omap850 by Zebediah C. McClure - * Adapted for omap7xx by Alistair Buxton - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP7XX_H -#define __ASM_ARCH_OMAP7XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP7XX_DSP_BASE 0xE0000000 -#define OMAP7XX_DSP_SIZE 0x50000 -#define OMAP7XX_DSP_START 0xE0000000 - -#define OMAP7XX_DSPREG_BASE 0xE1000000 -#define OMAP7XX_DSPREG_SIZE SZ_128K -#define OMAP7XX_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_CONFIG_BASE 0xfffe1000 -#define OMAP7XX_IO_CONF_0 0xfffe1070 -#define OMAP7XX_IO_CONF_1 0xfffe1074 -#define OMAP7XX_IO_CONF_2 0xfffe1078 -#define OMAP7XX_IO_CONF_3 0xfffe107c -#define OMAP7XX_IO_CONF_4 0xfffe1080 -#define OMAP7XX_IO_CONF_5 0xfffe1084 -#define OMAP7XX_IO_CONF_6 0xfffe1088 -#define OMAP7XX_IO_CONF_7 0xfffe108c -#define OMAP7XX_IO_CONF_8 0xfffe1090 -#define OMAP7XX_IO_CONF_9 0xfffe1094 -#define OMAP7XX_IO_CONF_10 0xfffe1098 -#define OMAP7XX_IO_CONF_11 0xfffe109c -#define OMAP7XX_IO_CONF_12 0xfffe10a0 -#define OMAP7XX_IO_CONF_13 0xfffe10a4 - -#define OMAP7XX_MODE_1 0xfffe1010 -#define OMAP7XX_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP7XX_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_FLASH_CFG_0 0xfffecc10 -#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 -#define OMAP7XX_FLASH_CFG_1 0xfffecc14 -#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_ICR_BASE 0xfffbb800 -#define OMAP7XX_DSP_M_CTL 0xfffbb804 -#define OMAP7XX_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP7XX_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/mach/omap850.h deleted file mode 100644 index c33f67981712..000000000000 --- a/arch/arm/plat-omap/include/mach/omap850.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap850.h - * - * Hardware definitions for TI OMAP850 processor. - * - * Derived from omap730.h by Zebediah C. McClure - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP850_H -#define __ASM_ARCH_OMAP850_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP850_DSP_BASE 0xE0000000 -#define OMAP850_DSP_SIZE 0x50000 -#define OMAP850_DSP_START 0xE0000000 - -#define OMAP850_DSPREG_BASE 0xE1000000 -#define OMAP850_DSPREG_SIZE SZ_128K -#define OMAP850_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_CONFIG_BASE 0xfffe1000 -#define OMAP850_IO_CONF_0 0xfffe1070 -#define OMAP850_IO_CONF_1 0xfffe1074 -#define OMAP850_IO_CONF_2 0xfffe1078 -#define OMAP850_IO_CONF_3 0xfffe107c -#define OMAP850_IO_CONF_4 0xfffe1080 -#define OMAP850_IO_CONF_5 0xfffe1084 -#define OMAP850_IO_CONF_6 0xfffe1088 -#define OMAP850_IO_CONF_7 0xfffe108c -#define OMAP850_IO_CONF_8 0xfffe1090 -#define OMAP850_IO_CONF_9 0xfffe1094 -#define OMAP850_IO_CONF_10 0xfffe1098 -#define OMAP850_IO_CONF_11 0xfffe109c -#define OMAP850_IO_CONF_12 0xfffe10a0 -#define OMAP850_IO_CONF_13 0xfffe10a4 - -#define OMAP850_MODE_1 0xfffe1010 -#define OMAP850_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP850_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_FLASH_CFG_0 0xfffecc10 -#define OMAP850_FLASH_ACFG_0 0xfffecc50 -#define OMAP850_FLASH_CFG_1 0xfffecc14 -#define OMAP850_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_ICR_BASE 0xfffbb800 -#define OMAP850_DSP_M_CTL 0xfffbb804 -#define OMAP850_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP850_H */ - diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h deleted file mode 100644 index bd0e136db337..000000000000 --- a/arch/arm/plat-omap/include/mach/omap_device.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * omap_device headers - * - * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * - * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram - * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard - * Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Eventually this type of functionality should either be - * a) implemented via arch-specific pointers in platform_device - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_device - * - * omap_device differs from omap_hwmod in that it includes external - * (e.g., board- and system-level) integration details. omap_hwmod - * stores hardware data that is invariant for a given OMAP chip. - * - * To do: - * - GPIO integration - * - regulator integration - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H - -#include -#include - -#include - -/* omap_device._state values */ -#define OMAP_DEVICE_STATE_UNKNOWN 0 -#define OMAP_DEVICE_STATE_ENABLED 1 -#define OMAP_DEVICE_STATE_IDLE 2 -#define OMAP_DEVICE_STATE_SHUTDOWN 3 - -/** - * struct omap_device - omap_device wrapper for platform_devices - * @pdev: platform_device - * @hwmods: (one .. many per omap_device) - * @hwmods_cnt: ARRAY_SIZE() of @hwmods - * @pm_lats: ptr to an omap_device_pm_latency table - * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats - * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in microseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM - * @_state: one of OMAP_DEVICE_STATE_* (see above) - * @flags: device flags - * - * Integrates omap_hwmod data into Linux platform_device. - * - * Field names beginning with underscores are for the internal use of - * the omap_device code. - * - */ -struct omap_device { - struct platform_device pdev; - struct omap_hwmod **hwmods; - struct omap_device_pm_latency *pm_lats; - u32 dev_wakeup_lat; - u32 _dev_wakeup_lat_limit; - u8 pm_lats_cnt; - s8 pm_lat_level; - u8 hwmods_cnt; - u8 _state; -}; - -/* Device driver interface (call via platform_data fn ptrs) */ - -int omap_device_enable(struct platform_device *pdev); -int omap_device_idle(struct platform_device *pdev); -int omap_device_shutdown(struct platform_device *pdev); - -/* Core code interface */ - -int omap_device_count_resources(struct omap_device *od); -int omap_device_fill_resources(struct omap_device *od, struct resource *res); - -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); - -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **oh, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); - -int omap_device_register(struct omap_device *od); - -/* OMAP PM interface */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit); -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); - -/* Other */ - -int omap_device_idle_hwmods(struct omap_device *od); -int omap_device_enable_hwmods(struct omap_device *od); - -int omap_device_disable_clocks(struct omap_device *od); -int omap_device_enable_clocks(struct omap_device *od); - - -/* - * Entries should be kept in latency order ascending - * - * deact_lat is the maximum number of microseconds required to complete - * deactivate_func() at the device's slowest OPP. - * - * act_lat is the maximum number of microseconds required to complete - * activate_func() at the device's slowest OPP. - * - * This will result in some suboptimal power management decisions at fast - * OPPs, but avoids having to recompute all device power management decisions - * if the system shifts from a fast OPP to a slow OPP (in order to meet - * latency requirements). - * - * XXX should deactivate_func/activate_func() take platform_device pointers - * rather than omap_device pointers? - */ -struct omap_device_pm_latency { - u32 deactivate_lat; - int (*deactivate_func)(struct omap_device *od); - u32 activate_lat; - int (*activate_func)(struct omap_device *od); -}; - - -#endif - diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h deleted file mode 100644 index 1f79c20e2929..000000000000 --- a/arch/arm/plat-omap/include/mach/omap_hwmod.h +++ /dev/null @@ -1,447 +0,0 @@ -/* - * omap_hwmod macros, structures - * - * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * - * Created in collaboration with (alphabetical order): Benoit Cousson, - * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari - * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These headers and macros are used to define OMAP on-chip module - * data and their integration with other OMAP modules and Linux. - * - * References: - * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) - * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) - * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) - * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) - * - Open Core Protocol Specification 2.2 - * - * To do: - * - add interconnect error log structures - * - add pinmuxing - * - init_conn_id_bit (CONNID_BIT_VECTOR) - * - implement default hwmod SMS/SDRC flags? - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H - -#include -#include - -#include - -struct omap_device; - -/* OCP SYSCONFIG bit shifts/masks */ -#define SYSC_MIDLEMODE_SHIFT 12 -#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT) -#define SYSC_CLOCKACTIVITY_SHIFT 8 -#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT) -#define SYSC_SIDLEMODE_SHIFT 3 -#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT) -#define SYSC_ENAWAKEUP_SHIFT 2 -#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) -#define SYSC_SOFTRESET_SHIFT 1 -#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) - -/* OCP SYSSTATUS bit shifts/masks */ -#define SYSS_RESETDONE_SHIFT 0 -#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) - -/* Master standby/slave idle mode flags */ -#define HWMOD_IDLEMODE_FORCE (1 << 0) -#define HWMOD_IDLEMODE_NO (1 << 1) -#define HWMOD_IDLEMODE_SMART (1 << 2) - - -/** - * struct omap_hwmod_dma_info - MPU address space handled by the hwmod - * @name: name of the DMA channel (module local name) - * @dma_ch: DMA channel ID - * - * @name should be something short, e.g., "tx" or "rx". It is for use - * by platform_get_resource_byname(). It is defined locally to the - * hwmod. - */ -struct omap_hwmod_dma_info { - const char *name; - u16 dma_ch; -}; - -/** - * struct omap_hwmod_opt_clk - optional clocks used by this hwmod - * @role: "sys", "32k", "tv", etc -- for use in clk_get() - * @clkdev_dev_id: opt clock: clkdev dev_id string - * @clkdev_con_id: opt clock: clkdev con_id string - * @_clk: pointer to the struct clk (filled in at runtime) - * - * The module's interface clock and main functional clock should not - * be added as optional clocks. - */ -struct omap_hwmod_opt_clk { - const char *role; - const char *clkdev_dev_id; - const char *clkdev_con_id; - struct clk *_clk; -}; - - -/* omap_hwmod_omap2_firewall.flags bits */ -#define OMAP_FIREWALL_L3 (1 << 0) -#define OMAP_FIREWALL_L4 (1 << 1) - -/** - * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data - * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* - * @l4_fw_region: L4 firewall region ID - * @l4_prot_group: L4 protection group ID - * @flags: (see omap_hwmod_omap2_firewall.flags macros above) - */ -struct omap_hwmod_omap2_firewall { - u8 l3_perm_bit; - u8 l4_fw_region; - u8 l4_prot_group; - u8 flags; -}; - - -/* - * omap_hwmod_addr_space.flags bits - * - * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. - * ADDR_TYPE_RT: Address space contains module register target data. - */ -#define ADDR_MAP_ON_INIT (1 << 0) -#define ADDR_TYPE_RT (1 << 1) - -/** - * struct omap_hwmod_addr_space - MPU address space handled by the hwmod - * @pa_start: starting physical address - * @pa_end: ending physical address - * @flags: (see omap_hwmod_addr_space.flags macros above) - * - * Address space doesn't necessarily follow physical interconnect - * structure. GPMC is one example. - */ -struct omap_hwmod_addr_space { - u32 pa_start; - u32 pa_end; - u8 flags; -}; - - -/* - * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this - * interface to interact with the hwmod. Used to add sleep dependencies - * when the module is enabled or disabled. - */ -#define OCP_USER_MPU (1 << 0) -#define OCP_USER_SDMA (1 << 1) - -/* omap_hwmod_ocp_if.flags bits */ -#define OCPIF_HAS_IDLEST (1 << 0) -#define OCPIF_SWSUP_IDLE (1 << 1) -#define OCPIF_CAN_BURST (1 << 2) - -/** - * struct omap_hwmod_ocp_if - OCP interface data - * @master: struct omap_hwmod that initiates OCP transactions on this link - * @slave: struct omap_hwmod that responds to OCP transactions on this link - * @addr: address space associated with this link - * @clkdev_dev_id: interface clock: clkdev dev_id string - * @clkdev_con_id: interface clock: clkdev con_id string - * @_clk: pointer to the interface struct clk (filled in at runtime) - * @fw: interface firewall data - * @addr_cnt: ARRAY_SIZE(@addr) - * @width: OCP data width - * @thread_cnt: number of threads - * @max_burst_len: maximum burst length in @width sized words (0 if unlimited) - * @user: initiators using this interface (see OCP_USER_* macros above) - * @flags: OCP interface flags (see OCPIF_* macros above) - * - * It may also be useful to add a tag_cnt field for OCP2.x devices. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - */ -struct omap_hwmod_ocp_if { - struct omap_hwmod *master; - struct omap_hwmod *slave; - struct omap_hwmod_addr_space *addr; - const char *clkdev_dev_id; - const char *clkdev_con_id; - struct clk *_clk; - union { - struct omap_hwmod_omap2_firewall omap2; - } fw; - u8 addr_cnt; - u8 width; - u8 thread_cnt; - u8 max_burst_len; - u8 user; - u8 flags; -}; - - -/* Macros for use in struct omap_hwmod_sysconfig */ - -/* Flags for use in omap_hwmod_sysconfig.idlemodes */ -#define MASTER_STANDBY_SHIFT 2 -#define SLAVE_IDLE_SHIFT 0 -#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) -#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) -#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) -#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) -#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) - -/* omap_hwmod_sysconfig.sysc_flags capability flags */ -#define SYSC_HAS_AUTOIDLE (1 << 0) -#define SYSC_HAS_SOFTRESET (1 << 1) -#define SYSC_HAS_ENAWAKEUP (1 << 2) -#define SYSC_HAS_EMUFREE (1 << 3) -#define SYSC_HAS_CLOCKACTIVITY (1 << 4) -#define SYSC_HAS_SIDLEMODE (1 << 5) -#define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_MISSING (1 << 7) - -/* omap_hwmod_sysconfig.clockact flags */ -#define CLOCKACT_TEST_BOTH 0x0 -#define CLOCKACT_TEST_MAIN 0x1 -#define CLOCKACT_TEST_ICLK 0x2 -#define CLOCKACT_TEST_NONE 0x3 - -/** - * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data - * @rev_offs: IP block revision register offset (from module base addr) - * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) - * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) - * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} - * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported - * @clockact: the default value of the module CLOCKACTIVITY bits - * - * @clockact describes to the module which clocks are likely to be - * disabled when the PRCM issues its idle request to the module. Some - * modules have separate clockdomains for the interface clock and main - * functional clock, and can check whether they should acknowledge the - * idle request based on the internal module functionality that has - * been associated with the clocks marked in @clockact. This field is - * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) - * - */ -struct omap_hwmod_sysconfig { - u16 rev_offs; - u16 sysc_offs; - u16 syss_offs; - u8 idlemodes; - u8 sysc_flags; - u8 clockact; -}; - -/** - * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data - * @module_offs: PRCM submodule offset from the start of the PRM/CM - * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) - * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs - * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) - * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit - * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit - * - * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, - * WKEN, GRPSEL registers. In an ideal world, no extra information - * would be needed for IDLEST information, but alas, there are some - * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit - * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) - */ -struct omap_hwmod_omap2_prcm { - s16 module_offs; - u8 prcm_reg_id; - u8 module_bit; - u8 idlest_reg_id; - u8 idlest_idle_bit; - u8 idlest_stdby_bit; -}; - - -/** - * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2 - * @device_offs: device register offset from @module_offs - * @submodule_wkdep_bit: bit shift of the WKDEP range - */ -struct omap_hwmod_omap4_prcm { - u32 module_offs; - u16 device_offs; - u8 submodule_wkdep_bit; -}; - - -/* - * omap_hwmod.flags definitions - * - * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out - * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby - * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for - * SDRAM controller, etc. - * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM - * controller, etc. - * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup - */ -#define HWMOD_SWSUP_SIDLE (1 << 0) -#define HWMOD_SWSUP_MSTANDBY (1 << 1) -#define HWMOD_INIT_NO_RESET (1 << 2) -#define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) - -/* - * omap_hwmod._int_flags definitions - * These are for internal use only and are managed by the omap_hwmod code. - * - * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP - * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached - */ -#define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) - -/* - * omap_hwmod._state definitions - * - * INITIALIZED: reset (optionally), initialized, enabled, disabled - * (optionally) - * - * - */ -#define _HWMOD_STATE_UNKNOWN 0 -#define _HWMOD_STATE_REGISTERED 1 -#define _HWMOD_STATE_CLKS_INITED 2 -#define _HWMOD_STATE_INITIALIZED 3 -#define _HWMOD_STATE_ENABLED 4 -#define _HWMOD_STATE_IDLE 5 -#define _HWMOD_STATE_DISABLED 6 - -/** - * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) - * @name: name of the hwmod - * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) - * @prcm: PRCM data pertaining to this hwmod - * @clkdev_dev_id: main clock: clkdev dev_id string - * @clkdev_con_id: main clock: clkdev con_id string - * @_clk: pointer to the main struct clk (filled in at runtime) - * @opt_clks: other device clocks that drivers can request (0..*) - * @masters: ptr to array of OCP ifs that this hwmod can initiate on - * @slaves: ptr to array of OCP ifs that this hwmod can respond on - * @sysconfig: device SYSCONFIG/SYSSTATUS register data - * @dev_attr: arbitrary device attributes that can be passed to the driver - * @_sysc_cache: internal-use hwmod flags - * @_rt_va: cached register target start address (internal use) - * @_mpu_port_index: cached MPU register target slave ID (internal use) - * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) - * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift - * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_chs_cnt: number of @sdma_chs - * @opt_clks_cnt: number of @opt_clks - * @master_cnt: number of @master entries - * @slaves_cnt: number of @slave entries - * @response_lat: device OCP response latency (in interface clock cycles) - * @_int_flags: internal-use hwmod flags - * @_state: internal-use hwmod state - * @flags: hwmod flags (documented below) - * @omap_chip: OMAP chips this hwmod is present on - * @node: list node for hwmod list (internal use) - * - * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main - * clock," which for our purposes is defined as "the functional clock needed - * for register accesses to complete." Modules may not have a main clock if - * the interface clock also serves as a main clock. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - */ -struct omap_hwmod { - const char *name; - struct omap_device *od; - u8 *mpu_irqs; - struct omap_hwmod_dma_info *sdma_chs; - union { - struct omap_hwmod_omap2_prcm omap2; - struct omap_hwmod_omap4_prcm omap4; - } prcm; - const char *clkdev_dev_id; - const char *clkdev_con_id; - struct clk *_clk; - struct omap_hwmod_opt_clk *opt_clks; - struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ - struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ - struct omap_hwmod_sysconfig *sysconfig; - void *dev_attr; - u32 _sysc_cache; - void __iomem *_rt_va; - struct list_head node; - u16 flags; - u8 _mpu_port_index; - u8 msuspendmux_reg_id; - u8 msuspendmux_shift; - u8 response_lat; - u8 mpu_irqs_cnt; - u8 sdma_chs_cnt; - u8 opt_clks_cnt; - u8 masters_cnt; - u8 slaves_cnt; - u8 hwmods_cnt; - u8 _int_flags; - u8 _state; - const struct omap_chip_id omap_chip; -}; - -int omap_hwmod_init(struct omap_hwmod **ohs); -int omap_hwmod_register(struct omap_hwmod *oh); -int omap_hwmod_unregister(struct omap_hwmod *oh); -struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); -int omap_hwmod_late_init(void); - -int omap_hwmod_enable(struct omap_hwmod *oh); -int omap_hwmod_idle(struct omap_hwmod *oh); -int omap_hwmod_shutdown(struct omap_hwmod *oh); - -int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -int omap_hwmod_disable_clocks(struct omap_hwmod *oh); - -int omap_hwmod_reset(struct omap_hwmod *oh); -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); - -void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs); -u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs); - -int omap_hwmod_count_resources(struct omap_hwmod *oh); -int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); - -struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); - -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); - -int omap_hwmod_set_clockact_both(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_main(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_none(struct omap_hwmod *oh); - -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h deleted file mode 100644 index b226bdf45739..000000000000 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * File: arch/arm/plat-omap/include/mach/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include -#include - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -#include - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*set_rotate) (int angle); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - const struct lcd_ctrl *ctrl; /* LCD controller */ - const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_reserve_sdram(void); -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h deleted file mode 100644 index 72f433d7d827..000000000000 --- a/arch/arm/plat-omap/include/mach/onenand.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/onenand.h - * - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int freq); - int dma_channel; - u8 flags; -}; - -#define ONENAND_MAX_PARTITIONS 8 - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); - -#else - -#define board_onenand_data NULL - -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h deleted file mode 100644 index 1eb4dc326979..000000000000 --- a/arch/arm/plat-omap/include/mach/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h deleted file mode 100644 index fa6461423bd0..000000000000 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * OMAP2/3 powerdomain control - * - * Copyright (C) 2007-8 Texas Instruments, Inc. - * Copyright (C) 2007-8 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN -#define ASM_ARM_ARCH_OMAP_POWERDOMAIN - -#include -#include - -#include - -#include - - -/* Powerdomain basic power states */ -#define PWRDM_POWER_OFF 0x0 -#define PWRDM_POWER_RET 0x1 -#define PWRDM_POWER_INACTIVE 0x2 -#define PWRDM_POWER_ON 0x3 - -/* Powerdomain allowable state bitfields */ -#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ - (1 << PWRDM_POWER_ON)) - -#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \ - (1 << PWRDM_POWER_RET)) - -#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) - - -/* Powerdomain flags */ -#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ - - -/* - * Number of memory banks that are power-controllable. On OMAP3430, the - * maximum is 4. - */ -#define PWRDM_MAX_MEM_BANKS 4 - -/* - * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain on OMAP3 is the worst case - */ -#define PWRDM_MAX_CLKDMS 4 - -/* XXX A completely arbitrary number. What is reasonable here? */ -#define PWRDM_TRANSITION_BAILOUT 100000 - -struct clockdomain; -struct powerdomain; - -/* Encodes dependencies between powerdomains - statically defined */ -struct pwrdm_dep { - - /* Powerdomain name */ - const char *pwrdm_name; - - /* Powerdomain pointer - resolved by the powerdomain code */ - struct powerdomain *pwrdm; - - /* Flags to mark OMAP chip restrictions, etc. */ - const struct omap_chip_id omap_chip; - -}; - -struct powerdomain { - - /* Powerdomain name */ - const char *name; - - /* the address offset from CM_BASE/PRM_BASE */ - const s16 prcm_offs; - - /* Used to represent the OMAP chip types containing this pwrdm */ - const struct omap_chip_id omap_chip; - - /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ - const u8 dep_bit; - - /* Powerdomains that can be told to wake this powerdomain up */ - struct pwrdm_dep *wkdep_srcs; - - /* Powerdomains that can be told to keep this pwrdm from inactivity */ - struct pwrdm_dep *sleepdep_srcs; - - /* Possible powerdomain power states */ - const u8 pwrsts; - - /* Possible logic power states when pwrdm in RETENTION */ - const u8 pwrsts_logic_ret; - - /* Powerdomain flags */ - const u8 flags; - - /* Number of software-controllable memory banks in this powerdomain */ - const u8 banks; - - /* Possible memory bank pwrstates when pwrdm in RETENTION */ - const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS]; - - /* Possible memory bank pwrstates when pwrdm is ON */ - const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; - - /* Clockdomains in this powerdomain */ - struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; - - struct list_head node; - - int state; - unsigned state_counter[4]; - -#ifdef CONFIG_PM_DEBUG - s64 timer; - s64 state_timer[4]; -#endif -}; - - -void pwrdm_init(struct powerdomain **pwrdm_list); - -int pwrdm_register(struct powerdomain *pwrdm); -int pwrdm_unregister(struct powerdomain *pwrdm); -struct powerdomain *pwrdm_lookup(const char *name); - -int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), - void *user); -int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), - void *user); - -int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, - int (*fn)(struct powerdomain *pwrdm, - struct clockdomain *clkdm)); - -int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); - -int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); - -int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); -int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); -int pwrdm_read_pwrst(struct powerdomain *pwrdm); -int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); -int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); - -int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); -int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); -int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); - -int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm); -int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); -int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); -int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); - -int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); -int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); -bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); - -int pwrdm_wait_transition(struct powerdomain *pwrdm); - -int pwrdm_state_switch(struct powerdomain *pwrdm); -int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); -int pwrdm_pre_transition(void); -int pwrdm_post_transition(void); - -#endif diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h deleted file mode 100644 index cda2a70397b4..000000000000 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H -#define __ASM_ARM_ARCH_OMAP_PRCM_H - -u32 omap_prcm_get_reset_sources(void); -void omap_prcm_arch_reset(char mode); -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); - -#endif - - - - - diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h deleted file mode 100644 index 7b58a5f78ce4..000000000000 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ /dev/null @@ -1,143 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h deleted file mode 100644 index e249186d26e2..000000000000 --- a/arch/arm/plat-omap/include/mach/serial.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Addded OMAP4 support- Santosh Shilimkar - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include - -#if defined(CONFIG_ARCH_OMAP1) -/* OMAP1 serial ports */ -#define OMAP_UART1_BASE 0xfffb0000 -#define OMAP_UART2_BASE 0xfffb0800 -#define OMAP_UART3_BASE 0xfffb9800 -#define OMAP_MAX_NR_PORTS 3 -#elif defined(CONFIG_ARCH_OMAP2) -/* OMAP2 serial ports */ -#define OMAP_UART1_BASE 0x4806a000 -#define OMAP_UART2_BASE 0x4806c000 -#define OMAP_UART3_BASE 0x4806e000 -#define OMAP_MAX_NR_PORTS 3 -#elif defined(CONFIG_ARCH_OMAP3) -/* OMAP3 serial ports */ -#define OMAP_UART1_BASE 0x4806a000 -#define OMAP_UART2_BASE 0x4806c000 -#define OMAP_UART3_BASE 0x49020000 -#define OMAP_MAX_NR_PORTS 3 -#elif defined(CONFIG_ARCH_OMAP4) -/* OMAP4 serial ports */ -#define OMAP_UART1_BASE 0x4806a000 -#define OMAP_UART2_BASE 0x4806c000 -#define OMAP_UART3_BASE 0x48020000 -#define OMAP_UART4_BASE 0x4806e000 -#define OMAP_MAX_NR_PORTS 4 -#endif - -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) -#define OMAP24XX_BASE_BAUD (48000000/16) - -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP_UART1_BASE || \ - (pt)->port.mapbase == OMAP_UART2_BASE || \ - (pt)->port.mapbase == OMAP_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - -#ifndef __ASSEMBLER__ -extern void __init omap_serial_early_init(void); -extern void omap_serial_init(void); -extern int omap_uart_can_sleep(void); -extern void omap_uart_check_wakeup(void); -extern void omap_uart_prepare_suspend(void); -extern void omap_uart_prepare_idle(int num); -extern void omap_uart_resume_idle(int num); -extern void omap_uart_enable_irqs(int enable); -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h deleted file mode 100644 index 8974e3fc2691..000000000000 --- a/arch/arm/plat-omap/include/mach/sram.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern int __init omap_sram_init(void); -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#endif diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h deleted file mode 100644 index d2fcd789bb9a..000000000000 --- a/arch/arm/plat-omap/include/mach/tc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/tc.h - * - * OMAP Traffic Controller - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_TC_H -#define __ASM_ARCH_TC_H - -#define TCMIF_BASE 0xfffecc00 -#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) -#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) -#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) -#define EMIFS_ACS0 (TCMIF_BASE + 0x50) -#define EMIFS_ACS1 (TCMIF_BASE + 0x54) -#define EMIFS_ACS2 (TCMIF_BASE + 0x58) -#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) -#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) - -/* external EMIFS chipselect regions */ -#define OMAP_CS0_PHYS 0x00000000 -#define OMAP_CS0_SIZE SZ_64M - -#define OMAP_CS1_PHYS 0x04000000 -#define OMAP_CS1_SIZE SZ_64M - -#define OMAP_CS1A_PHYS OMAP_CS1_PHYS -#define OMAP_CS1A_SIZE SZ_32M - -#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) -#define OMAP_CS1B_SIZE SZ_32M - -#define OMAP_CS2_PHYS 0x08000000 -#define OMAP_CS2_SIZE SZ_64M - -#define OMAP_CS2A_PHYS OMAP_CS2_PHYS -#define OMAP_CS2A_SIZE SZ_32M - -#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) -#define OMAP_CS2B_SIZE SZ_32M - -#define OMAP_CS3_PHYS 0x0c000000 -#define OMAP_CS3_SIZE SZ_64M - -#ifndef __ASSEMBLER__ - -/* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) - -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h deleted file mode 100644 index c88d346b59d9..000000000000 --- a/arch/arm/plat-omap/include/mach/timer-gp.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * OMAP2/3 GPTIMER support.headers - * - * Copyright (C) 2009 Nokia Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H - -int __init omap2_gp_clockevent_set_gptimer(u8 id); - -#endif - diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h deleted file mode 100644 index f337e1761e2c..000000000000 --- a/arch/arm/plat-omap/include/mach/usb.h +++ /dev/null @@ -1,145 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include - -/*-------------------------------------------------------------------------*/ - -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - -extern void usb_musb_init(void); - -#endif - -void omap_usb_init(struct omap_usb_config *pdata); - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h new file mode 100644 index 000000000000..8d160f171372 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/blizzard.h @@ -0,0 +1,12 @@ +#ifndef _BLIZZARD_H +#define _BLIZZARD_H + +struct blizzard_platform_data { + void (*power_up)(struct device *dev); + void (*power_down)(struct device *dev); + unsigned long (*get_clock_rate)(struct device *dev); + + unsigned te_connected : 1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h new file mode 100644 index 000000000000..51b102dc906b --- /dev/null +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -0,0 +1,76 @@ +/* + * arch/arm/plat-omap/include/mach/board-ams-delta.h + * + * Copyright (C) 2006 Jonathan McDowell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H +#define __ASM_ARCH_OMAP_AMS_DELTA_H + +#if defined (CONFIG_MACH_AMS_DELTA) + +#define AMS_DELTA_LATCH1_PHYS 0x01000000 +#define AMS_DELTA_LATCH1_VIRT 0xEA000000 +#define AMS_DELTA_MODEM_PHYS 0x04000000 +#define AMS_DELTA_MODEM_VIRT 0xEB000000 +#define AMS_DELTA_LATCH2_PHYS 0x08000000 +#define AMS_DELTA_LATCH2_VIRT 0xEC000000 + +#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 +#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 +#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 +#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 +#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 +#define AMS_DELTA_LATCH1_LED_VOICE 0x20 + +#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 +#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 +#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 +#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 +#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 +#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 +#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 +#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 +#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 +#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 +#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 +#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 +#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 + +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 +#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 +#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 +#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 +#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 +#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 +#define AMS_DELTA_GPIO_PIN_CONFIG 11 +#define AMS_DELTA_GPIO_PIN_NAND_RB 12 + +#ifndef __ASSEMBLY__ +void ams_delta_latch1_write(u8 mask, u8 value); +void ams_delta_latch2_write(u16 mask, u16 value); +#endif + +#endif /* CONFIG_MACH_AMS_DELTA */ + +#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h new file mode 100644 index 000000000000..355adbdaae33 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/board-sx1.h @@ -0,0 +1,52 @@ +/* + * Siemens SX1 board definitions + * + * Copyright: Vovan888 at gmail com + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H +#define __ASM_ARCH_SX1_I2C_CHIPS_H + +#define SOFIA_MAX_LIGHT_VAL 0x2B + +#define SOFIA_I2C_ADDR 0x32 +/* Sofia reg 3 bits masks */ +#define SOFIA_POWER1_REG 0x03 + +#define SOFIA_USB_POWER 0x01 +#define SOFIA_MMC_POWER 0x04 +#define SOFIA_BLUETOOTH_POWER 0x08 +#define SOFIA_MMILIGHT_POWER 0x20 + +#define SOFIA_POWER2_REG 0x04 +#define SOFIA_BACKLIGHT_REG 0x06 +#define SOFIA_KEYLIGHT_REG 0x07 +#define SOFIA_DIMMING_REG 0x09 + + +/* Function Prototypes for SX1 devices control on I2C bus */ + +int sx1_setbacklight(u8 backlight); +int sx1_getbacklight(u8 *backlight); +int sx1_setkeylight(u8 keylight); +int sx1_getkeylight(u8 *keylight); + +int sx1_setmmipower(u8 onoff); +int sx1_setusbpower(u8 onoff); +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); + +/* MMC prototypes */ + +extern void sx1_mmc_init(void); +extern void sx1_mmc_slot_cover_handler(void *arg, int state); + +#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h new file mode 100644 index 000000000000..27916b210f57 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl + * + * Hardware definitions for OMAP5910 based VoiceBlue board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VOICEBLUE_H +#define __ASM_ARCH_VOICEBLUE_H + +extern void voiceblue_wdt_enable(void); +extern void voiceblue_wdt_disable(void); +extern void voiceblue_wdt_ping(void); + +#endif /* __ASM_ARCH_VOICEBLUE_H */ + diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h new file mode 100644 index 000000000000..c4fc69f09796 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/board.h @@ -0,0 +1,160 @@ +/* + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä + */ + +#ifndef _OMAP_BOARD_H +#define _OMAP_BOARD_H + +#include + +#include + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_camera_sensor_config { + u16 reset_gpio; + int (*power_on)(void * data); + int (*power_off)(void * data); +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct device; +struct fb_info; +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); + int (*check_fb)(struct fb_info *fb); +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_pwm_led_platform_data { + const char *name; + int intensity_timer; + int blink_timer; + void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); +}; + +/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + int flags:4; + int type:4; + int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + + +struct omap_flash_part_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + +struct omap_board_config_entry { + u16 tag; + u16 len; + u8 data[0]; +}; + +struct omap_board_config_kernel { + u16 tag; + const void *data; +}; + +extern const void *__omap_get_config(u16 tag, size_t len, int nr); + +#define omap_get_config(tag, type) \ + ((const type *) __omap_get_config((tag), sizeof(type), 0)) +#define omap_get_nr_config(tag, type, nr) \ + ((const type *) __omap_get_config((tag), sizeof(type), (nr))) + +extern const void *omap_get_var_config(u16 tag, size_t *len); + +extern struct omap_board_config_kernel *omap_board_config; +extern int omap_board_config_size; + + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h new file mode 100644 index 000000000000..4b8b0d65cbf2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -0,0 +1,163 @@ +/* + * arch/arm/plat-omap/include/mach/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_CLOCK_H +#define __ARCH_ARM_OMAP_CLOCK_H + +struct module; +struct clk; +struct clockdomain; + +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); +}; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) + +struct clksel_rate { + u32 val; + u8 div; + u8 flags; +}; + +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned int rate_tolerance; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u8 last_rounded_n; + u8 min_divider; + u8 max_divider; + u32 max_tolerance; + u16 max_multiplier; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; +# endif +}; + +#endif + +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + int id; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + __u32 flags; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + __u8 enable_bit; + __s8 usecount; +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) + u8 fixed_div; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; +#else + __u8 rate_offset; + __u8 src_offset; +#endif +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct cpufreq_frequency_table; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +#ifdef CONFIG_CPU_FREQ + void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); +#endif +}; + +extern unsigned int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +#ifdef CONFIG_CPU_FREQ +extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +#endif + +extern const struct clkops clkops_null; + +/* Clock flags */ +/* bit 0 is free */ +#define RATE_FIXED (1 << 1) /* Fixed clock rate */ +/* bits 2-4 are free */ +#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 7) +#define CLOCK_NO_IDLE_PARENT (1 << 8) +#define DELAYED_APP (1 << 9) /* Delay application of clock */ +#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ +#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +/* bits 13-31 are currently free */ + +/* Clksel_rate flags */ +#define DEFAULT_RATE (1 << 0) +#define RATE_IN_242X (1 << 1) +#define RATE_IN_243X (1 << 2) +#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ +#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) + + +#endif diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h new file mode 100644 index 000000000000..eb734826e64e --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clockdomain.h @@ -0,0 +1,111 @@ +/* + * arch/arm/plat-omap/include/mach/clockdomain.h + * + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H +#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H + +#include +#include +#include + +/* Clockdomain capability flags */ +#define CLKDM_CAN_FORCE_SLEEP (1 << 0) +#define CLKDM_CAN_FORCE_WAKEUP (1 << 1) +#define CLKDM_CAN_ENABLE_AUTO (1 << 2) +#define CLKDM_CAN_DISABLE_AUTO (1 << 3) + +#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) +#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) +#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP) + +/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */ +#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 + +/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */ +#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 +#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2 +#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3 + +/* + * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps + * and sleepdeps added when a powerdomain should stay active in hwsup mode; + * and conversely, removed when the powerdomain should be allowed to go + * inactive in hwsup mode. + */ +struct clkdm_pwrdm_autodep { + + union { + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *name; + + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *ptr; + } pwrdm; + + /* OMAP chip types that this clockdomain dep is valid on */ + const struct omap_chip_id omap_chip; + +}; + +struct clockdomain { + + /* Clockdomain name */ + const char *name; + + union { + /* Powerdomain enclosing this clockdomain */ + const char *name; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *ptr; + } pwrdm; + + /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ + const u16 clktrctrl_mask; + + /* Clockdomain capability flags */ + const u8 flags; + + /* OMAP chip types that this clockdomain is valid on */ + const struct omap_chip_id omap_chip; + + /* Usecount tracking */ + atomic_t usecount; + + struct list_head node; + +}; + +void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps); +int clkdm_register(struct clockdomain *clkdm); +int clkdm_unregister(struct clockdomain *clkdm); +struct clockdomain *clkdm_lookup(const char *name); + +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user), + void *user); +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm); + +void omap2_clkdm_allow_idle(struct clockdomain *clkdm); +void omap2_clkdm_deny_idle(struct clockdomain *clkdm); + +int omap2_clkdm_wakeup(struct clockdomain *clkdm); +int omap2_clkdm_sleep(struct clockdomain *clkdm); + +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); + +#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h new file mode 100644 index 000000000000..064f1730f43b --- /dev/null +++ b/arch/arm/plat-omap/include/plat/common.h @@ -0,0 +1,74 @@ +/* + * arch/arm/plat-omap/include/mach/common.h + * + * Header for code common to all OMAP machines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H +#define __ARCH_ARM_MACH_OMAP_COMMON_H + +#include + +struct sys_timer; + +/* used by omap-smp.c and board-4430sdp.c */ +extern void __iomem *gic_cpu_base_addr; + +extern void omap_map_common_io(void); +extern struct sys_timer omap_timer; +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +/* IO bases for various OMAP processors */ +struct omap_globals { + u32 class; /* OMAP class to detect */ + void __iomem *tap; /* Control module ID code */ + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ +}; + +void omap2_set_globals_242x(void); +void omap2_set_globals_243x(void); +void omap2_set_globals_343x(void); +void omap2_set_globals_443x(void); + +/* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_tap(struct omap_globals *); +void omap2_set_globals_sdrc(struct omap_globals *); +void omap2_set_globals_control(struct omap_globals *); +void omap2_set_globals_prcm(struct omap_globals *); + +#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h new file mode 100644 index 000000000000..805819f3a868 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/control.h @@ -0,0 +1,230 @@ +/* + * arch/arm/plat-omap/include/mach/control.h + * + * OMAP2/3/4 System Control Module definitions + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + +#include + +#ifndef __ASSEMBLY__ +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#else +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#endif /* __ASSEMBLY__ */ + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) +#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) + +/* 34xx D2D idle-related pins, handled by PM core */ +#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 +#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) +#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +/* CONTROL_PBIAS_LITE bits */ +#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) +#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) +#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) +#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) +#define OMAP343X_PBIASLITEVMODE1 (1 << 8) +#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) +#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) +#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) +#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) +#define OMAP2_PBIASLITEVMODE0 (1 << 0) + +/* CONTROL_IVA2_BOOTMOD bits */ +#define OMAP3_IVA2_BOOTMOD_SHIFT 0 +#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) +#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) + +/* CONTROL_PADCONF_X bits */ +#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) +#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) +extern void __iomem *omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +#else +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_CONTROL_H */ + diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h new file mode 100644 index 000000000000..f129efb3075e --- /dev/null +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -0,0 +1,426 @@ +/* + * arch/arm/plat-omap/include/mach/cpu.h + * + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009 Texas Instruments. + * + * Written by Tony Lindgren + * + * Added OMAP4 specific defines - Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + +struct omap_chip_id { + u8 oc; + u8 type; +}; + +#define OMAP_CHIP_INIT(x) { .oc = x } + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif +#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) +# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) +# error "OMAP1 and OMAP2 can't be selected at the same time" +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3430 +# endif +#endif + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) +IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) + +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +#if defined(MULTI_OMAP2) +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# undef cpu_is_omap242x +# undef cpu_is_omap243x +# define cpu_is_omap24xx() is_omap24xx() +# define cpu_is_omap242x() is_omap242x() +# define cpu_is_omap243x() is_omap243x() +# endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap330(): True for OMAP330 + * cpu_is_omap730(): True for OMAP730 + * cpu_is_omap850(): True for OMAP850 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(730, 0x0730) +IS_OMAP_TYPE(850, 0x0850) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) +IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) + +#define cpu_is_omap310() 0 +#define cpu_is_omap730() 0 +#define cpu_is_omap850() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 +# define cpu_is_omap730() is_omap730() +#endif + +#if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap850 +# define cpu_is_omap850() is_omap850() +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() +#endif + +#if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap3430 +# define cpu_is_omap3430() is_omap3430() +#endif + +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# define cpu_is_omap44xx() 1 +# define cpu_is_omap443x() 1 +# endif + +/* Macros to detect if we have OMAP1 or OMAP2 */ +#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ + cpu_is_omap16xx()) +#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ + cpu_is_omap44xx()) + +/* Various silicon revisions for omap2 */ +#define OMAP242X_CLASS 0x24200024 +#define OMAP2420_REV_ES1_0 0x24200024 +#define OMAP2420_REV_ES2_0 0x24201024 + +#define OMAP243X_CLASS 0x24300024 +#define OMAP2430_REV_ES1_0 0x24300024 + +#define OMAP343X_CLASS 0x34300034 +#define OMAP3430_REV_ES1_0 0x34300034 +#define OMAP3430_REV_ES2_0 0x34301034 +#define OMAP3430_REV_ES2_1 0x34302034 +#define OMAP3430_REV_ES3_0 0x34303034 +#define OMAP3430_REV_ES3_1 0x34304034 + +#define OMAP443X_CLASS 0x44300034 + +/* + * omap_chip bits + * + * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is + * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates + * something that is only valid on that particular ES revision. + * + * These bits may be ORed together to indicate structures that are + * available on multiple chip types. + * + * To test whether a particular structure matches the current OMAP chip type, + * use omap_chip_is(). + * + */ +#define CHIP_IS_OMAP2420 (1 << 0) +#define CHIP_IS_OMAP2430 (1 << 1) +#define CHIP_IS_OMAP3430 (1 << 2) +#define CHIP_IS_OMAP3430ES1 (1 << 3) +#define CHIP_IS_OMAP3430ES2 (1 << 4) +#define CHIP_IS_OMAP3430ES3_0 (1 << 5) +#define CHIP_IS_OMAP3430ES3_1 (1 << 6) + +#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) + +/* + * "GE" here represents "greater than or equal to" in terms of ES + * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430 + * chips at ES2 and beyond, but not, for example, any OMAP lines after + * OMAP3. + */ +#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ + CHIP_IS_OMAP3430ES3_0 | \ + CHIP_IS_OMAP3430ES3_1) +#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1) + + +int omap_chip_is(struct omap_chip_id oci); +void omap2_check_revision(void); + +#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h new file mode 100644 index 000000000000..72f680b7180d --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -0,0 +1,675 @@ +/* + * arch/arm/plat-omap/include/mach/dma.h + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +/* Hardware registers for omap1 */ +#define OMAP1_DMA_BASE (0xfffed800) + +#define OMAP1_DMA_GCR 0x400 +#define OMAP1_DMA_GSCR 0x404 +#define OMAP1_DMA_GRST 0x408 +#define OMAP1_DMA_HW_ID 0x442 +#define OMAP1_DMA_PCH2_ID 0x444 +#define OMAP1_DMA_PCH0_ID 0x446 +#define OMAP1_DMA_PCH1_ID 0x448 +#define OMAP1_DMA_PCHG_ID 0x44a +#define OMAP1_DMA_PCHD_ID 0x44c +#define OMAP1_DMA_CAPS_0_U 0x44e +#define OMAP1_DMA_CAPS_0_L 0x450 +#define OMAP1_DMA_CAPS_1_U 0x452 +#define OMAP1_DMA_CAPS_1_L 0x454 +#define OMAP1_DMA_CAPS_2 0x456 +#define OMAP1_DMA_CAPS_3 0x458 +#define OMAP1_DMA_CAPS_4 0x45a +#define OMAP1_DMA_PCH2_SR 0x460 +#define OMAP1_DMA_PCH0_SR 0x480 +#define OMAP1_DMA_PCH1_SR 0x482 +#define OMAP1_DMA_PCHD_SR 0x4c0 + +/* Hardware registers for omap2 and omap3 */ +#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) +#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) +#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000) + +#define OMAP_DMA4_REVISION 0x00 +#define OMAP_DMA4_GCR 0x78 +#define OMAP_DMA4_IRQSTATUS_L0 0x08 +#define OMAP_DMA4_IRQSTATUS_L1 0x0c +#define OMAP_DMA4_IRQSTATUS_L2 0x10 +#define OMAP_DMA4_IRQSTATUS_L3 0x14 +#define OMAP_DMA4_IRQENABLE_L0 0x18 +#define OMAP_DMA4_IRQENABLE_L1 0x1c +#define OMAP_DMA4_IRQENABLE_L2 0x20 +#define OMAP_DMA4_IRQENABLE_L3 0x24 +#define OMAP_DMA4_SYSSTATUS 0x28 +#define OMAP_DMA4_OCP_SYSCONFIG 0x2c +#define OMAP_DMA4_CAPS_0 0x64 +#define OMAP_DMA4_CAPS_2 0x6c +#define OMAP_DMA4_CAPS_3 0x70 +#define OMAP_DMA4_CAPS_4 0x74 + +#define OMAP1_LOGICAL_DMA_CH_COUNT 17 +#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ + +/* Common channel specific registers for omap1 */ +#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) +#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) +#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) +#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) +#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) +#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) +#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) +#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ +#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) +#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) +#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) +#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) +#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) + +/* Common channel specific registers for omap2 */ +#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) +#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) +#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) +#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) +#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) +#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) +#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) +#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) +#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) +#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) +#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) +#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) + +/* Channel specific registers only on omap1 */ +#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) +#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) +#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) +#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) +#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) +#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) +#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) +#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ +#define OMAP1_DMA_CCEN(n) 0 +#define OMAP1_DMA_CCFN(n) 0 + +/* Channel specific registers only on omap2 */ +#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) +#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) +#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) +#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) +#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) + +/* Additional registers available on OMAP4 */ +#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0) +#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4) +#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8) + +/* Dummy defines to keep multi-omap compiles happy */ +#define OMAP1_DMA_REVISION 0 +#define OMAP1_DMA_IRQSTATUS_L0 0 +#define OMAP1_DMA_IRQENABLE_L0 0 +#define OMAP1_DMA_OCP_SYSCONFIG 0 +#define OMAP_DMA4_HW_ID 0 +#define OMAP_DMA4_CAPS_0_L 0 +#define OMAP_DMA4_CAPS_0_U 0 +#define OMAP_DMA4_CAPS_1_L 0 +#define OMAP_DMA4_CAPS_1_U 0 +#define OMAP_DMA4_GSCR 0 +#define OMAP_DMA4_CPC(n) 0 + +#define OMAP_DMA4_LCH_CTRL(n) 0 +#define OMAP_DMA4_COLOR_L(n) 0 +#define OMAP_DMA4_COLOR_U(n) 0 +#define OMAP_DMA4_CCR2(n) 0 +#define OMAP1_DMA_CSSA(n) 0 +#define OMAP1_DMA_CDSA(n) 0 +#define OMAP_DMA4_CSSA_L(n) 0 +#define OMAP_DMA4_CSSA_U(n) 0 +#define OMAP_DMA4_CDSA_L(n) 0 +#define OMAP_DMA4_CDSA_U(n) 0 +#define OMAP1_DMA_COLOR(n) 0 + +/*----------------------------------------------------------------------------*/ + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +/* DMA request lines for 44xx */ +#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */ +#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */ +#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */ +#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */ +#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */ +#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */ +#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */ +#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */ +#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */ +#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */ +#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */ +#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */ +#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */ +#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */ +#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */ +#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */ +#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */ +#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */ +#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */ +#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */ +#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */ +#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */ +#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */ +#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */ +#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */ +#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */ +#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */ +#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */ +#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */ +#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */ +#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */ +#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */ +#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */ +#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */ +#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */ +#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */ +#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */ +#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */ +#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */ + +/*----------------------------------------------------------------------------*/ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + + +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h new file mode 100644 index 000000000000..20f1054c0a80 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -0,0 +1,84 @@ +/* + * arch/arm/plat-omap/include/mach/dmtimer.h + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen + * PWM and clock framwork support by Timo Teras. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_DMTIMER_H +#define __ASM_ARCH_DMTIMER_H + +/* clock sources */ +#define OMAP_TIMER_SRC_SYS_CLK 0x00 +#define OMAP_TIMER_SRC_32_KHZ 0x01 +#define OMAP_TIMER_SRC_EXT_CLK 0x02 + +/* timer interrupt enable bits */ +#define OMAP_TIMER_INT_CAPTURE (1 << 2) +#define OMAP_TIMER_INT_OVERFLOW (1 << 1) +#define OMAP_TIMER_INT_MATCH (1 << 0) + +/* trigger types */ +#define OMAP_TIMER_TRIGGER_NONE 0x00 +#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 +#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 + +struct omap_dm_timer; +struct clk; + +int omap_dm_timer_init(void); + +struct omap_dm_timer *omap_dm_timer_request(void); +struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +void omap_dm_timer_free(struct omap_dm_timer *timer); +void omap_dm_timer_enable(struct omap_dm_timer *timer); +void omap_dm_timer_disable(struct omap_dm_timer *timer); + +int omap_dm_timer_get_irq(struct omap_dm_timer *timer); + +u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); +struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); + +void omap_dm_timer_trigger(struct omap_dm_timer *timer); +void omap_dm_timer_start(struct omap_dm_timer *timer); +void omap_dm_timer_stop(struct omap_dm_timer *timer); + +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); +void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); +void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); +void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); +void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); +void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); + +int omap_dm_timers_active(void); + + +#endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h new file mode 100644 index 000000000000..da97736f3efa --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dsp_common.h @@ -0,0 +1,40 @@ +/* + * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) + * + * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. + * + * Contact: Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef ASM_ARCH_DSP_COMMON_H +#define ASM_ARCH_DSP_COMMON_H + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) +extern void omap_dsp_request_mpui(void); +extern void omap_dsp_release_mpui(void); +extern int omap_dsp_request_mem(void); +extern int omap_dsp_release_mem(void); +#else +static inline int omap_dsp_request_mem(void) +{ + return 0; +} +#define omap_dsp_release_mem() do {} while (0) +#endif + +#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h new file mode 100644 index 000000000000..f1864a652f7a --- /dev/null +++ b/arch/arm/plat-omap/include/plat/fpga.h @@ -0,0 +1,197 @@ +/* + * arch/arm/plat-omap/include/mach/fpga.h + * + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) +extern void omap1510_fpga_init_irq(void); +#else +#define omap1510_fpga_init_irq() (0) +#endif + +#define fpga_read(reg) __raw_readb(reg) +#define fpga_write(val, reg) __raw_writeb(val, reg) + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) + +#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) +#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) +#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + +#endif diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h new file mode 100644 index 000000000000..10da0e07c0cf --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpio-switch.h @@ -0,0 +1,54 @@ +/* + * GPIO switch definitions + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H +#define __ASM_ARCH_OMAP_GPIO_SWITCH_H + +#include + +/* Cover: + * high -> closed + * low -> open + * Connection: + * high -> connected + * low -> disconnected + * Activity: + * high -> active + * low -> inactive + * + */ +#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 +#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 +#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 +#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 +#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 + +struct omap_gpio_switch { + const char *name; + s16 gpio; + unsigned flags:4; + unsigned type:4; + + /* Time in ms to debounce when transitioning from + * inactive state to active state. */ + u16 debounce_rising; + /* Same for transition from active to inactive state. */ + u16 debounce_falling; + + /* notify board-specific code about state changes */ + void (* notify)(void *data, int state); + void *notify_data; +}; + +/* Call at init time only */ +extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, + int count); + +#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h new file mode 100644 index 000000000000..b64fbee4d567 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h @@ -0,0 +1,42 @@ +/* + * arch/arm/plat-omap/include/mach/gpmc-smc91x.h + * + * Copyright (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ + +#define GPMC_TIMINGS_SMC91C96 (1 << 4) +#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ +#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ +#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ + +struct omap_smc91x_platform_data { + int cs; + int gpio_irq; + int gpio_pwrdwn; + int gpio_reset; + int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ + u32 flags; + int (*retime)(void); +}; + +#if defined(CONFIG_SMC91X) || \ + defined(CONFIG_SMC91X_MODULE) + +extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); + +#else + +#define board_smc91x_data NULL + +static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) +{ +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h new file mode 100644 index 000000000000..9c99cda77ba6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -0,0 +1,112 @@ +/* + * General-Purpose Memory Controller for OMAP2 + * + * Copyright (C) 2005-2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_GPMC_H +#define __OMAP2_GPMC_H + +/* Maximum Number of Chip Selects */ +#define GPMC_CS_NUM 8 + +#define GPMC_CS_CONFIG1 0x00 +#define GPMC_CS_CONFIG2 0x04 +#define GPMC_CS_CONFIG3 0x08 +#define GPMC_CS_CONFIG4 0x0c +#define GPMC_CS_CONFIG5 0x10 +#define GPMC_CS_CONFIG6 0x14 +#define GPMC_CS_CONFIG7 0x18 +#define GPMC_CS_NAND_COMMAND 0x1c +#define GPMC_CS_NAND_ADDRESS 0x20 +#define GPMC_CS_NAND_DATA 0x24 + +#define GPMC_CONFIG 0x50 +#define GPMC_STATUS 0x54 + +#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) +#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) +#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) +#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) +#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) +#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) +#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) +#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) +#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) +#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) +#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) +#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) +#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) +#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) +#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) +#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) +#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) +#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) +#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) +#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) +#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) + +/* + * Note that all values in this struct are in nanoseconds, while + * the register values are in gpmc_fck cycles. + */ +struct gpmc_timings { + /* Minimum clock period for synchronous mode */ + u16 sync_clk; + + /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ + u16 cs_on; /* Assertion time */ + u16 cs_rd_off; /* Read deassertion time */ + u16 cs_wr_off; /* Write deassertion time */ + + /* ADV signal timings corresponding to GPMC_CONFIG3 */ + u16 adv_on; /* Assertion time */ + u16 adv_rd_off; /* Read deassertion time */ + u16 adv_wr_off; /* Write deassertion time */ + + /* WE signals timings corresponding to GPMC_CONFIG4 */ + u16 we_on; /* WE assertion time */ + u16 we_off; /* WE deassertion time */ + + /* OE signals timings corresponding to GPMC_CONFIG4 */ + u16 oe_on; /* OE assertion time */ + u16 oe_off; /* OE deassertion time */ + + /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ + u16 page_burst_access; /* Multiple access word delay */ + u16 access; /* Start-cycle to first data valid delay */ + u16 rd_cycle; /* Total read cycle time */ + u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ +}; + +extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); +extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); +extern unsigned long gpmc_get_fclk_period(void); + +extern void gpmc_cs_write_reg(int cs, int idx, u32 val); +extern u32 gpmc_cs_read_reg(int cs, int idx); +extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); +extern void gpmc_cs_free(int cs); +extern int gpmc_cs_set_reserved(int cs, int reserved); +extern int gpmc_cs_reserved(int cs); +extern int gpmc_prefetch_enable(int cs, int dma_mode, + unsigned int u32_count, int is_write); +extern void gpmc_prefetch_reset(void); +extern int gpmc_prefetch_status(void); +extern void __init gpmc_init(void); + +#endif diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index b3b713dc4b59..d5b26adfb890 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -39,9 +39,9 @@ #include #ifndef __ASSEMBLER__ #include -#include +#include #endif -#include +#include /* * --------------------------------------------------------------------------- @@ -280,11 +280,11 @@ * --------------------------------------------------------------------------- */ -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h new file mode 100644 index 000000000000..886248d32b49 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/hwa742.h @@ -0,0 +1,8 @@ +#ifndef _HWA742_H +#define _HWA742_H + +struct hwa742_platform_data { + unsigned te_connected:1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h new file mode 100644 index 000000000000..0752af9d099e --- /dev/null +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -0,0 +1,168 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU_H +#define __MACH_IOMMU_H + +struct iotlb_entry { + u32 da; + u32 pa; + u32 pgsz, prsvd, valid; + union { + u16 ap; + struct { + u32 endian, elsz, mixed; + }; + }; +}; + +struct iommu { + const char *name; + struct module *owner; + struct clk *clk; + void __iomem *regbase; + struct device *dev; + + unsigned int refcount; + struct mutex iommu_lock; /* global for this whole object */ + + /* + * We don't change iopgd for a situation like pgd for a task, + * but share it globally for each iommu. + */ + u32 *iopgd; + spinlock_t page_table_lock; /* protect iopgd */ + + int nr_tlb_entries; + + struct list_head mmap; + struct mutex mmap_lock; /* protect mmap */ + + int (*isr)(struct iommu *obj); + + void *ctx; /* iommu context: registres saved area */ +}; + +struct cr_regs { + union { + struct { + u16 cam_l; + u16 cam_h; + }; + u32 cam; + }; + union { + struct { + u16 ram_l; + u16 ram_h; + }; + u32 ram; + }; +}; + +struct iotlb_lock { + short base; + short vict; +}; + +/* architecture specific functions */ +struct iommu_functions { + unsigned long version; + + int (*enable)(struct iommu *obj); + void (*disable)(struct iommu *obj); + u32 (*fault_isr)(struct iommu *obj, u32 *ra); + + void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); + void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); + + struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); + int (*cr_valid)(struct cr_regs *cr); + u32 (*cr_to_virt)(struct cr_regs *cr); + void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); + ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); + + u32 (*get_pte_attr)(struct iotlb_entry *e); + + void (*save_ctx)(struct iommu *obj); + void (*restore_ctx)(struct iommu *obj); + ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len); +}; + +struct iommu_platform_data { + const char *name; + const char *clk_name; + const int nr_tlb_entries; +}; + +#if defined(CONFIG_ARCH_OMAP1) +#error "iommu for this processor not implemented yet" +#else +#include +#endif + +/* + * utilities for super page(16MB, 1MB, 64KB and 4KB) + */ + +#define iopgsz_max(bytes) \ + (((bytes) >= SZ_16M) ? SZ_16M : \ + ((bytes) >= SZ_1M) ? SZ_1M : \ + ((bytes) >= SZ_64K) ? SZ_64K : \ + ((bytes) >= SZ_4K) ? SZ_4K : 0) + +#define bytes_to_iopgsz(bytes) \ + (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ + ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ + ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ + ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) + +#define iopgsz_to_bytes(iopgsz) \ + (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ + ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ + ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ + ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) + +#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) + +/* + * global functions + */ +extern u32 iommu_arch_version(void); + +extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); +extern u32 iotlb_cr_to_virt(struct cr_regs *cr); + +extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); +extern void flush_iotlb_page(struct iommu *obj, u32 da); +extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); +extern void flush_iotlb_all(struct iommu *obj); + +extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); +extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); + +extern struct iommu *iommu_get(const char *name); +extern void iommu_put(struct iommu *obj); + +extern void iommu_save_ctx(struct iommu *obj); +extern void iommu_restore_ctx(struct iommu *obj); + +extern int install_iommu_arch(const struct iommu_functions *ops); +extern void uninstall_iommu_arch(const struct iommu_functions *ops); + +extern int foreach_iommu_device(void *data, + int (*fn)(struct device *, void *)); + +extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len); +extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len); + +#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h new file mode 100644 index 000000000000..10ad05f410e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/iommu2.h @@ -0,0 +1,96 @@ +/* + * omap iommu: omap2 architecture specific definitions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU2_H +#define __MACH_IOMMU2_H + +#include + +/* + * MMU Register offsets + */ +#define MMU_REVISION 0x00 +#define MMU_SYSCONFIG 0x10 +#define MMU_SYSSTATUS 0x14 +#define MMU_IRQSTATUS 0x18 +#define MMU_IRQENABLE 0x1c +#define MMU_WALKING_ST 0x40 +#define MMU_CNTL 0x44 +#define MMU_FAULT_AD 0x48 +#define MMU_TTB 0x4c +#define MMU_LOCK 0x50 +#define MMU_LD_TLB 0x54 +#define MMU_CAM 0x58 +#define MMU_RAM 0x5c +#define MMU_GFLUSH 0x60 +#define MMU_FLUSH_ENTRY 0x64 +#define MMU_READ_CAM 0x68 +#define MMU_READ_RAM 0x6c +#define MMU_EMU_FAULT_AD 0x70 + +#define MMU_REG_SIZE 256 + +/* + * MMU Register bit definitions + */ +#define MMU_LOCK_BASE_SHIFT 10 +#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) +#define MMU_LOCK_BASE(x) \ + ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) + +#define MMU_LOCK_VICT_SHIFT 4 +#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) +#define MMU_LOCK_VICT(x) \ + ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) + +#define MMU_CAM_VATAG_SHIFT 12 +#define MMU_CAM_VATAG_MASK \ + ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) +#define MMU_CAM_P (1 << 3) +#define MMU_CAM_V (1 << 2) +#define MMU_CAM_PGSZ_MASK 3 +#define MMU_CAM_PGSZ_1M (0 << 0) +#define MMU_CAM_PGSZ_64K (1 << 0) +#define MMU_CAM_PGSZ_4K (2 << 0) +#define MMU_CAM_PGSZ_16M (3 << 0) + +#define MMU_RAM_PADDR_SHIFT 12 +#define MMU_RAM_PADDR_MASK \ + ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) +#define MMU_RAM_ENDIAN_SHIFT 9 +#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ELSZ_SHIFT 7 +#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_MIXED_SHIFT 6 +#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) +#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK + +/* + * register accessors + */ +static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) +{ + return __raw_readl(obj->regbase + offs); +} + +static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) +{ + __raw_writel(val, obj->regbase + offs); +} + +#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h new file mode 100644 index 000000000000..bdc7ce5d7a4a --- /dev/null +++ b/arch/arm/plat-omap/include/plat/iovmm.h @@ -0,0 +1,94 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOMMU_MMAP_H +#define __IOMMU_MMAP_H + +struct iovm_struct { + struct iommu *iommu; /* iommu object which this belongs to */ + u32 da_start; /* area definition */ + u32 da_end; + u32 flags; /* IOVMF_: see below */ + struct list_head list; /* linked in ascending order */ + const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ + void *va; /* mpu side mapped address */ +}; + +/* + * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) + * + * lower 16 bit is used for h/w and upper 16 bit is for s/w. + */ +#define IOVMF_SW_SHIFT 16 +#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) +#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) +#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL + +/* + * iovma: h/w flags derived from cam and ram attribute + */ +#define IOVMF_CAM_MASK (~((1 << 10) - 1)) +#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) + +#define IOVMF_PGSZ_MASK (3 << 0) +#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M +#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K +#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K +#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M + +#define IOVMF_ENDIAN_MASK (1 << 9) +#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG +#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE + +#define IOVMF_ELSZ_MASK (3 << 7) +#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 +#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 +#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 +#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE + +#define IOVMF_MIXED_MASK (1 << 6) +#define IOVMF_MIXED MMU_RAM_MIXED + +/* + * iovma: s/w flags, used for mapping and umapping internally. + */ +#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) + +/* "superpages" is supported just with physically linear pages */ +#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) + +#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT)) + + +extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); +extern u32 iommu_vmap(struct iommu *obj, u32 da, + const struct sg_table *sgt, u32 flags); +extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); +extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_vfree(struct iommu *obj, const u32 da); +extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, + u32 flags); +extern void iommu_kunmap(struct iommu *obj, u32 da); +extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_kfree(struct iommu *obj, u32 da); + +extern void *da_to_va(struct iommu *obj, u32 da); + +#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/plat-omap/include/plat/irda.h new file mode 100644 index 000000000000..40f60339d1c6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/irda.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/irda.h + * + * Copyright (C) 2005-2006 Komal Shah + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_SEL 1 /* Selects IrDA */ +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 +#define IR_MIRMODE 8 + +struct omap_irda_config { + int transceiver_cap; + int (*transceiver_mode)(struct device *dev, int mode); + int (*select_irda)(struct device *dev, int state); + int rx_channel; + int tx_channel; + unsigned long dest_start; + unsigned long src_start; + int tx_trigger; + int rx_trigger; + int mode; +}; + +#endif diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h new file mode 100644 index 000000000000..d91b9be334ff --- /dev/null +++ b/arch/arm/plat-omap/include/plat/keypad.h @@ -0,0 +1,42 @@ +/* + * arch/arm/plat-omap/include/mach/keypad.h + * + * Copyright (C) 2006 Komal Shah + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_KEYPAD_H +#define ASMARM_ARCH_KEYPAD_H + +#include + +struct omap_kp_platform_data { + int rows; + int cols; + int *keymap; + unsigned int keymapsize; + unsigned int rep:1; + unsigned long delay; + unsigned int dbounce:1; + /* specific to OMAP242x*/ + unsigned int *row_gpios; + unsigned int *col_gpios; +}; + +/* Group (0..3) -- when multiple keys are pressed, only the + * keys pressed in the same group are considered as pressed. This is + * in order to workaround certain crappy HW designs that produce ghost + * keypresses. */ +#define GROUP_0 (0 << 16) +#define GROUP_1 (1 << 16) +#define GROUP_2 (2 << 16) +#define GROUP_3 (3 << 16) +#define GROUP_MASK GROUP_3 + +#define KEY_PERSISTENT 0x00800000 +#define KEYNUM_MASK 0x00EFFFFF + +#endif + diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h new file mode 100644 index 000000000000..8e52c6572281 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h @@ -0,0 +1,29 @@ +#ifndef __LCD_MIPID_H +#define __LCD_MIPID_H + +enum mipid_test_num { + MIPID_TEST_RGB_LINES, +}; + +enum mipid_test_result { + MIPID_TEST_SUCCESS, + MIPID_TEST_INVALID, + MIPID_TEST_FAILED, +}; + +#ifdef __KERNEL__ + +struct mipid_platform_data { + int nreset_gpio; + int data_lines; + + void (*shutdown)(struct mipid_platform_data *pdata); + void (*set_bklight_level)(struct mipid_platform_data *pdata, + int level); + int (*get_bklight_level)(struct mipid_platform_data *pdata); + int (*get_bklight_max)(struct mipid_platform_data *pdata); +}; + +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h new file mode 100644 index 000000000000..25e451e7e2fd --- /dev/null +++ b/arch/arm/plat-omap/include/plat/led.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/mach/led.h + * + * Copyright (C) 2006 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_LED_H +#define ASMARM_ARCH_LED_H + +struct omap_led_config { + struct led_classdev cdev; + s16 gpio; +}; + +struct omap_led_platform_data { + s16 nr_leds; + struct omap_led_config *leds; +}; + +#endif diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h new file mode 100644 index 000000000000..b7a6991814ec --- /dev/null +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -0,0 +1,96 @@ +/* mailbox.h */ + +#ifndef MAILBOX_H +#define MAILBOX_H + +#include +#include +#include + +typedef u32 mbox_msg_t; +typedef void (mbox_receiver_t)(mbox_msg_t msg); +struct omap_mbox; + +typedef int __bitwise omap_mbox_irq_t; +#define IRQ_TX ((__force omap_mbox_irq_t) 1) +#define IRQ_RX ((__force omap_mbox_irq_t) 2) + +typedef int __bitwise omap_mbox_type_t; +#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) +#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) + +struct omap_mbox_ops { + omap_mbox_type_t type; + int (*startup)(struct omap_mbox *mbox); + void (*shutdown)(struct omap_mbox *mbox); + /* fifo */ + mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); + void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); + int (*fifo_empty)(struct omap_mbox *mbox); + int (*fifo_full)(struct omap_mbox *mbox); + /* irq */ + void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + /* ctx */ + void (*save_ctx)(struct omap_mbox *mbox); + void (*restore_ctx)(struct omap_mbox *mbox); +}; + +struct omap_mbox_queue { + spinlock_t lock; + struct request_queue *queue; + struct work_struct work; + int (*callback)(void *); + struct omap_mbox *mbox; +}; + +struct omap_mbox { + char *name; + unsigned int irq; + + struct omap_mbox_queue *txq, *rxq; + + struct omap_mbox_ops *ops; + + mbox_msg_t seq_snd, seq_rcv; + + struct device *dev; + + struct omap_mbox *next; + void *priv; + + void (*err_notify)(void); +}; + +int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); +void omap_mbox_init_seq(struct omap_mbox *); + +struct omap_mbox *omap_mbox_get(const char *); +void omap_mbox_put(struct omap_mbox *); + +int omap_mbox_register(struct device *parent, struct omap_mbox *); +int omap_mbox_unregister(struct omap_mbox *); + +static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->save_ctx) { + dev_err(mbox->dev, "%s:\tno save\n", __func__); + return; + } + + mbox->ops->save_ctx(mbox); +} + +static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->restore_ctx) { + dev_err(mbox->dev, "%s:\tno restore\n", __func__); + return; + } + + mbox->ops->restore_ctx(mbox); +} + +#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h new file mode 100644 index 000000000000..4f22e5bb7ff7 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -0,0 +1,462 @@ +/* + * arch/arm/plat-omap/include/mach/mcbsp.h + * + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_OMAP_MCBSP_H +#define __ASM_ARCH_OMAP_MCBSP_H + +#include +#include + +#include +#include + +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 + +#define OMAP1510_MCBSP1_BASE 0xe1011800 +#define OMAP1510_MCBSP2_BASE 0xfffb1000 +#define OMAP1510_MCBSP3_BASE 0xe1017000 + +#define OMAP1610_MCBSP1_BASE 0xe1011800 +#define OMAP1610_MCBSP2_BASE 0xfffb1000 +#define OMAP1610_MCBSP3_BASE 0xe1017000 + +#define OMAP24XX_MCBSP1_BASE 0x48074000 +#define OMAP24XX_MCBSP2_BASE 0x48076000 +#define OMAP2430_MCBSP3_BASE 0x4808c000 +#define OMAP2430_MCBSP4_BASE 0x4808e000 +#define OMAP2430_MCBSP5_BASE 0x48096000 + +#define OMAP34XX_MCBSP1_BASE 0x48074000 +#define OMAP34XX_MCBSP2_BASE 0x49022000 +#define OMAP34XX_MCBSP3_BASE 0x49024000 +#define OMAP34XX_MCBSP4_BASE 0x49026000 +#define OMAP34XX_MCBSP5_BASE 0x48096000 + +#define OMAP44XX_MCBSP1_BASE 0x49022000 +#define OMAP44XX_MCBSP2_BASE 0x49024000 +#define OMAP44XX_MCBSP3_BASE 0x49026000 +#define OMAP44XX_MCBSP4_BASE 0x48074000 + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + +#define OMAP_MCBSP_REG_DRR2 0x00 +#define OMAP_MCBSP_REG_DRR1 0x02 +#define OMAP_MCBSP_REG_DXR2 0x04 +#define OMAP_MCBSP_REG_DXR1 0x06 +#define OMAP_MCBSP_REG_SPCR2 0x08 +#define OMAP_MCBSP_REG_SPCR1 0x0a +#define OMAP_MCBSP_REG_RCR2 0x0c +#define OMAP_MCBSP_REG_RCR1 0x0e +#define OMAP_MCBSP_REG_XCR2 0x10 +#define OMAP_MCBSP_REG_XCR1 0x12 +#define OMAP_MCBSP_REG_SRGR2 0x14 +#define OMAP_MCBSP_REG_SRGR1 0x16 +#define OMAP_MCBSP_REG_MCR2 0x18 +#define OMAP_MCBSP_REG_MCR1 0x1a +#define OMAP_MCBSP_REG_RCERA 0x1c +#define OMAP_MCBSP_REG_RCERB 0x1e +#define OMAP_MCBSP_REG_XCERA 0x20 +#define OMAP_MCBSP_REG_XCERB 0x22 +#define OMAP_MCBSP_REG_PCR0 0x24 +#define OMAP_MCBSP_REG_RCERC 0x26 +#define OMAP_MCBSP_REG_RCERD 0x28 +#define OMAP_MCBSP_REG_XCERC 0x2A +#define OMAP_MCBSP_REG_XCERD 0x2C +#define OMAP_MCBSP_REG_RCERE 0x2E +#define OMAP_MCBSP_REG_RCERF 0x30 +#define OMAP_MCBSP_REG_XCERE 0x32 +#define OMAP_MCBSP_REG_XCERF 0x34 +#define OMAP_MCBSP_REG_RCERG 0x36 +#define OMAP_MCBSP_REG_RCERH 0x38 +#define OMAP_MCBSP_REG_XCERG 0x3A +#define OMAP_MCBSP_REG_XCERH 0x3C + +/* Dummy defines, these are not available on omap1 */ +#define OMAP_MCBSP_REG_XCCR 0x00 +#define OMAP_MCBSP_REG_RCCR 0x00 + +#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) +#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) + +#define AUDIO_MCBSP OMAP_MCBSP1 +#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX +#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX + +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + +#define OMAP_MCBSP_REG_DRR2 0x00 +#define OMAP_MCBSP_REG_DRR1 0x04 +#define OMAP_MCBSP_REG_DXR2 0x08 +#define OMAP_MCBSP_REG_DXR1 0x0C +#define OMAP_MCBSP_REG_DRR 0x00 +#define OMAP_MCBSP_REG_DXR 0x08 +#define OMAP_MCBSP_REG_SPCR2 0x10 +#define OMAP_MCBSP_REG_SPCR1 0x14 +#define OMAP_MCBSP_REG_RCR2 0x18 +#define OMAP_MCBSP_REG_RCR1 0x1C +#define OMAP_MCBSP_REG_XCR2 0x20 +#define OMAP_MCBSP_REG_XCR1 0x24 +#define OMAP_MCBSP_REG_SRGR2 0x28 +#define OMAP_MCBSP_REG_SRGR1 0x2C +#define OMAP_MCBSP_REG_MCR2 0x30 +#define OMAP_MCBSP_REG_MCR1 0x34 +#define OMAP_MCBSP_REG_RCERA 0x38 +#define OMAP_MCBSP_REG_RCERB 0x3C +#define OMAP_MCBSP_REG_XCERA 0x40 +#define OMAP_MCBSP_REG_XCERB 0x44 +#define OMAP_MCBSP_REG_PCR0 0x48 +#define OMAP_MCBSP_REG_RCERC 0x4C +#define OMAP_MCBSP_REG_RCERD 0x50 +#define OMAP_MCBSP_REG_XCERC 0x54 +#define OMAP_MCBSP_REG_XCERD 0x58 +#define OMAP_MCBSP_REG_RCERE 0x5C +#define OMAP_MCBSP_REG_RCERF 0x60 +#define OMAP_MCBSP_REG_XCERE 0x64 +#define OMAP_MCBSP_REG_XCERF 0x68 +#define OMAP_MCBSP_REG_RCERG 0x6C +#define OMAP_MCBSP_REG_RCERH 0x70 +#define OMAP_MCBSP_REG_XCERG 0x74 +#define OMAP_MCBSP_REG_XCERH 0x78 +#define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_THRSH2 0x90 +#define OMAP_MCBSP_REG_THRSH1 0x94 +#define OMAP_MCBSP_REG_IRQST 0xA0 +#define OMAP_MCBSP_REG_IRQEN 0xA4 +#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 +#define OMAP_MCBSP_REG_XCCR 0xAC +#define OMAP_MCBSP_REG_RCCR 0xB0 + +#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) +#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) + +#define AUDIO_MCBSP OMAP_MCBSP2 +#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX +#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX + +#endif + +/************************** McBSP SPCR1 bit definitions ***********************/ +#define RRST 0x0001 +#define RRDY 0x0002 +#define RFULL 0x0004 +#define RSYNC_ERR 0x0008 +#define RINTM(value) ((value)<<4) /* bits 4:5 */ +#define ABIS 0x0040 +#define DXENA 0x0080 +#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ +#define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define ALB 0x8000 +#define DLB 0x8000 + +/************************** McBSP SPCR2 bit definitions ***********************/ +#define XRST 0x0001 +#define XRDY 0x0002 +#define XEMPTY 0x0004 +#define XSYNC_ERR 0x0008 +#define XINTM(value) ((value)<<4) /* bits 4:5 */ +#define GRST 0x0040 +#define FRST 0x0080 +#define SOFT 0x0100 +#define FREE 0x0200 + +/************************** McBSP PCR bit definitions *************************/ +#define CLKRP 0x0001 +#define CLKXP 0x0002 +#define FSRP 0x0004 +#define FSXP 0x0008 +#define DR_STAT 0x0010 +#define DX_STAT 0x0020 +#define CLKS_STAT 0x0040 +#define SCLKME 0x0080 +#define CLKRM 0x0100 +#define CLKXM 0x0200 +#define FSRM 0x0400 +#define FSXM 0x0800 +#define RIOEN 0x1000 +#define XIOEN 0x2000 +#define IDLE_EN 0x4000 + +/************************** McBSP RCR1 bit definitions ************************/ +#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/************************** McBSP XCR1 bit definitions ************************/ +#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/*************************** McBSP RCR2 bit definitions ***********************/ +#define RDATDLY(value) (value) /* Bits 0:1 */ +#define RFIG 0x0004 +#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define RPHASE 0x8000 + +/*************************** McBSP XCR2 bit definitions ***********************/ +#define XDATDLY(value) (value) /* Bits 0:1 */ +#define XFIG 0x0004 +#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define XPHASE 0x8000 + +/************************* McBSP SRGR1 bit definitions ************************/ +#define CLKGDV(value) (value) /* Bits 0:7 */ +#define FWID(value) ((value)<<8) /* Bits 8:15 */ + +/************************* McBSP SRGR2 bit definitions ************************/ +#define FPER(value) (value) /* Bits 0:11 */ +#define FSGM 0x1000 +#define CLKSM 0x2000 +#define CLKSP 0x4000 +#define GSYNC 0x8000 + +/************************* McBSP MCR1 bit definitions *************************/ +#define RMCM 0x0001 +#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ + +/************************* McBSP MCR2 bit definitions *************************/ +#define XMCM(value) (value) /* Bits 0:1 */ +#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ + +/*********************** McBSP XCCR bit definitions *************************/ +#define EXTCLKGATE 0x8000 +#define PPCONNECT 0x4000 +#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ +#define XFULL_CYCLE 0x0800 +#define DILB 0x0020 +#define XDMAEN 0x0008 +#define XDISABLE 0x0001 + +/********************** McBSP RCCR bit definitions *************************/ +#define RFULL_CYCLE 0x0800 +#define RDMAEN 0x0008 +#define RDISABLE 0x0001 + +/********************** McBSP SYSCONFIG bit definitions ********************/ +#define CLOCKACTIVITY(value) ((value)<<8) +#define SIDLEMODE(value) ((value)<<3) +#define ENAWAKEUP 0x0004 +#define SOFTRST 0x0002 + +/********************** McBSP DMA operating modes **************************/ +#define MCBSP_DMA_MODE_ELEMENT 0 +#define MCBSP_DMA_MODE_THRESHOLD 1 +#define MCBSP_DMA_MODE_FRAME 2 + +/********************** McBSP WAKEUPEN bit definitions *********************/ +#define XEMPTYEOFEN 0x4000 +#define XRDYEN 0x0400 +#define XEOFEN 0x0200 +#define XFSXEN 0x0100 +#define XSYNCERREN 0x0080 +#define RRDYEN 0x0008 +#define REOFEN 0x0004 +#define RFSREN 0x0002 +#define RSYNCERREN 0x0001 + +/* we don't do multichannel for now */ +struct omap_mcbsp_reg_cfg { + u16 spcr2; + u16 spcr1; + u16 rcr2; + u16 rcr1; + u16 xcr2; + u16 xcr1; + u16 srgr2; + u16 srgr1; + u16 mcr2; + u16 mcr1; + u16 pcr0; + u16 rcerc; + u16 rcerd; + u16 xcerc; + u16 xcerd; + u16 rcere; + u16 rcerf; + u16 xcere; + u16 xcerf; + u16 rcerg; + u16 rcerh; + u16 xcerg; + u16 xcerh; + u16 xccr; + u16 rccr; +}; + +typedef enum { + OMAP_MCBSP1 = 0, + OMAP_MCBSP2, + OMAP_MCBSP3, + OMAP_MCBSP4, + OMAP_MCBSP5 +} omap_mcbsp_id; + +typedef int __bitwise omap_mcbsp_io_type_t; +#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) +#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) + +typedef enum { + OMAP_MCBSP_WORD_8 = 0, + OMAP_MCBSP_WORD_12, + OMAP_MCBSP_WORD_16, + OMAP_MCBSP_WORD_20, + OMAP_MCBSP_WORD_24, + OMAP_MCBSP_WORD_32, +} omap_mcbsp_word_length; + +typedef enum { + OMAP_MCBSP_CLK_RISING = 0, + OMAP_MCBSP_CLK_FALLING, +} omap_mcbsp_clk_polarity; + +typedef enum { + OMAP_MCBSP_FS_ACTIVE_HIGH = 0, + OMAP_MCBSP_FS_ACTIVE_LOW, +} omap_mcbsp_fs_polarity; + +typedef enum { + OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, + OMAP_MCBSP_CLK_STP_MODE_DELAY, +} omap_mcbsp_clk_stp_mode; + + +/******* SPI specific mode **********/ +typedef enum { + OMAP_MCBSP_SPI_MASTER = 0, + OMAP_MCBSP_SPI_SLAVE, +} omap_mcbsp_spi_mode; + +struct omap_mcbsp_spi_cfg { + omap_mcbsp_spi_mode spi_mode; + omap_mcbsp_clk_polarity rx_clock_polarity; + omap_mcbsp_clk_polarity tx_clock_polarity; + omap_mcbsp_fs_polarity fsx_polarity; + u8 clk_div; + omap_mcbsp_clk_stp_mode clk_stp_mode; + omap_mcbsp_word_length word_length; +}; + +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + unsigned long phys_base; + u8 dma_rx_sync, dma_tx_sync; + u16 rx_irq, tx_irq; + struct omap_mcbsp_ops *ops; +#ifdef CONFIG_ARCH_OMAP34XX + u16 buffer_size; +#endif +}; + +struct omap_mcbsp { + struct device *dev; + unsigned long phys_base; + void __iomem *io_base; + u8 id; + u8 free; + omap_mcbsp_word_length rx_word_length; + omap_mcbsp_word_length tx_word_length; + + omap_mcbsp_io_type_t io_type; /* IRQ or poll */ + /* IRQ based TX/RX */ + int rx_irq; + int tx_irq; + + /* DMA stuff */ + u8 dma_rx_sync; + short dma_rx_lch; + u8 dma_tx_sync; + short dma_tx_lch; + + /* Completion queues */ + struct completion tx_irq_completion; + struct completion rx_irq_completion; + struct completion tx_dma_completion; + struct completion rx_dma_completion; + + /* Protect the field .free, while checking if the mcbsp is in use */ + spinlock_t lock; + struct omap_mcbsp_platform_data *pdata; + struct clk *iclk; + struct clk *fclk; +#ifdef CONFIG_ARCH_OMAP34XX + int dma_op_mode; + u16 max_tx_thres; + u16 max_rx_thres; +#endif +}; +extern struct omap_mcbsp **mcbsp_ptr; +extern int omap_mcbsp_count; + +int omap_mcbsp_init(void); +void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, + int size); +void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); +#ifdef CONFIG_ARCH_OMAP34XX +void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); +void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); +u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); +u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +int omap_mcbsp_get_dma_op_mode(unsigned int id); +#else +static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) +{ } +static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) +{ } +static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } +#endif +int omap_mcbsp_request(unsigned int id); +void omap_mcbsp_free(unsigned int id); +void omap_mcbsp_start(unsigned int id, int tx, int rx); +void omap_mcbsp_stop(unsigned int id, int tx, int rx); +void omap_mcbsp_xmit_word(unsigned int id, u32 word); +u32 omap_mcbsp_recv_word(unsigned int id); + +int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); +int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); + + +/* SPI specific API */ +void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); + +/* Polled read/write functions */ +int omap_mcbsp_pollread(unsigned int id, u16 * buf); +int omap_mcbsp_pollwrite(unsigned int id, u16 buf); +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); + +#endif diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h new file mode 100644 index 000000000000..1254e4945b6f --- /dev/null +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -0,0 +1,15 @@ +#ifndef _OMAP2_MCSPI_H +#define _OMAP2_MCSPI_H + +struct omap2_mcspi_platform_config { + unsigned short num_cs; +}; + +struct omap2_mcspi_device_config { + unsigned turbo_mode:1; + + /* Do we want one channel enabled at the same time? */ + unsigned single_channel:1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h new file mode 100644 index 000000000000..3122bf68c7ce --- /dev/null +++ b/arch/arm/plat-omap/include/plat/menelaus.h @@ -0,0 +1,49 @@ +/* + * arch/arm/plat-omap/include/mach/menelaus.h + * + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + +extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), + void *data); +extern void menelaus_unregister_mmc_callback(void); +extern int menelaus_set_mmc_opendrain(int slot, int enable); +extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); + +extern int menelaus_set_vmem(unsigned int mV); +extern int menelaus_set_vio(unsigned int mV); +extern int menelaus_set_vmmc(unsigned int mV); +extern int menelaus_set_vaux(unsigned int mV); +extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); +extern int menelaus_set_slot_sel(int enable); +extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h new file mode 100644 index 000000000000..29937137bf3e --- /dev/null +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -0,0 +1,157 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_MMC_H +#define __OMAP2_MMC_H + +#include +#include +#include + +#include + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#define OMAP24XX_NR_MMC 2 +#define OMAP34XX_NR_MMC 3 +#define OMAP44XX_NR_MMC 5 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define OMAP3_HSMMC_SIZE 0x200 +#define OMAP4_HSMMC_SIZE 0x1000 +#define OMAP2_MMC1_BASE 0x4809c000 +#define OMAP2_MMC2_BASE 0x480b4000 +#define OMAP3_MMC3_BASE 0x480ad000 +#define OMAP4_MMC4_BASE 0x480d1000 +#define OMAP4_MMC5_BASE 0x480d5000 +#define OMAP4_MMC_REG_OFFSET 0x100 +#define HSMMC5 (1 << 4) +#define HSMMC4 (1 << 3) +#define HSMMC3 (1 << 2) +#define HSMMC2 (1 << 1) +#define HSMMC1 (1 << 0) + +#define OMAP_MMC_MAX_SLOTS 2 + +struct omap_mmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* number of slots per controller */ + unsigned nr_slots:2; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (* switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (* init)(struct device *dev); + void (* cleanup)(struct device *dev); + void (* shutdown)(struct device *dev); + + /* To handle board related suspend/resume functionality for MMC */ + int (*suspend)(struct device *dev, int slot); + int (*resume)(struct device *dev, int slot); + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); + + u64 dma_mask; + + struct omap_mmc_slot_data { + + /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; + * 8 wire signaling is also optional, and is used with HSMMC + */ + u8 wires; + + /* + * nomux means "standard" muxing is wrong on this board, and + * that board-specific code handled it before common init logic. + */ + unsigned nomux:1; + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* Try to sleep or power off when possible */ + unsigned power_saving:1; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (* set_power)(struct device *dev, int slot, int power_on, int vdd); + int (* get_ro)(struct device *dev, int slot); + int (*set_sleep)(struct device *dev, int slot, int sleep, + int vdd, int cardsleep); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - closed + * 1 - open + */ + int (* get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (* card_detect)(int irq); + + unsigned int ban_openended:1; + + } slots[OMAP_MMC_MAX_SLOTS]; +}; + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +static inline int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) +{ + return 0; +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h new file mode 100644 index 000000000000..f3c1d8a90456 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -0,0 +1,864 @@ +/* + * arch/arm/plat-omap/include/mach/mux.h + * + * Table of the Omap register configurations for the FUNC_MUX and + * PULL_DWN combinations. + * + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation + * + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: Please use the following naming style for new pin entries. + * For example, W8_1610_MMC2_DAT0, where: + * - W8 = ball + * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 + * - MMC2_DAT0 = function + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ +#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ + +#ifdef CONFIG_OMAP_MUX_DEBUG +#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ + .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ + .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#else + +#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#endif /* CONFIG_OMAP_MUX_DEBUG */ + +#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status) \ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG(mux_reg, mode_offset, mode) \ + PULL_REG(pull_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + + +/* + * OMAP730/850 has a slightly different config for the pin mux. + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is is in the same register + * as mux config + */ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + +#define MUX_CFG_24XX(desc, reg_offset, mode, \ + pull_en, pull_mode, dbg) \ +{ \ + .name = desc, \ + .debug = dbg, \ + .mux_reg = reg_offset, \ + .mask = mode, \ + .pull_val = pull_en, \ + .pu_pd_val = pull_mode, \ +}, + +/* 24xx/34xx mux bit defines */ +#define OMAP2_PULL_ENA (1 << 3) +#define OMAP2_PULL_UP (1 << 4) +#define OMAP2_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP3_INPUT_EN (1 << 8) +#define OMAP3_OFF_EN (1 << 9) +#define OMAP3_OFFOUT_EN (1 << 10) +#define OMAP3_OFFOUT_VAL (1 << 11) +#define OMAP3_OFF_PULL_EN (1 << 12) +#define OMAP3_OFF_PULL_UP (1 << 13) +#define OMAP3_WAKEUP_EN (1 << 14) + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP34XX_MUX_MODE0 0 +#define OMAP34XX_MUX_MODE1 1 +#define OMAP34XX_MUX_MODE2 2 +#define OMAP34XX_MUX_MODE3 3 +#define OMAP34XX_MUX_MODE4 4 +#define OMAP34XX_MUX_MODE5 5 +#define OMAP34XX_MUX_MODE6 6 +#define OMAP34XX_MUX_MODE7 7 + +/* 34xx active pin states */ +#define OMAP34XX_PIN_OUTPUT 0 +#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN +#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ + | OMAP2_PULL_UP) +#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) + +/* 34xx off mode states */ +#define OMAP34XX_PIN_OFF_NONE 0 +#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ + | OMAP3_OFFOUT_VAL) +#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) +#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ + | OMAP3_OFF_PULL_UP) +#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) +#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN + +#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ + .name = desc, \ + .debug = 0, \ + .mux_reg = reg_offset, \ + .mux_val = mux_value \ +}, + +struct pin_config { + char *name; + const unsigned int mux_reg; + unsigned char debug; + +#if defined(CONFIG_ARCH_OMAP34XX) + u16 mux_val; /* Wake-up, off mode, pull, mux mode */ +#endif + +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) + const unsigned char mask_offset; + const unsigned char mask; + + const char *pull_name; + const unsigned int pull_reg; + const unsigned char pull_val; + const unsigned char pull_bit; + + const char *pu_pd_name; + const unsigned int pu_pd_reg; + const unsigned char pu_pd_val; +#endif + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + +}; + +enum omap7xx_index { + /* OMAP 730 keyboard */ + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, + + /* USB */ + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, +}; + +enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + N15_1610_MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + N20_HDQ, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP16XX GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N20_1610_GPIO11, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* 16XX UART */ + R13_1610_UART1_TX, + V14_16XX_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + +}; + +enum omap24xx_index { + /* 24xx I2C */ + M19_24XX_I2C1_SCL, + L15_24XX_I2C1_SDA, + J15_24XX_I2C2_SCL, + H19_24XX_I2C2_SDA, + + /* 24xx Menelaus interrupt */ + W19_24XX_SYS_NIRQ, + + /* 24xx clock */ + W14_24XX_SYS_CLKOUT, + + /* 24xx GPMC chipselects, wait pin monitoring */ + E2_GPMC_NCS2, + L2_GPMC_NCS7, + L3_GPMC_WAIT0, + N7_GPMC_WAIT1, + M1_GPMC_WAIT2, + P1_GPMC_WAIT3, + + /* 242X McBSP */ + Y15_24XX_MCBSP2_CLKX, + R14_24XX_MCBSP2_FSX, + W15_24XX_MCBSP2_DR, + V15_24XX_MCBSP2_DX, + + /* 24xx GPIO */ + M21_242X_GPIO11, + P21_242X_GPIO12, + AA10_242X_GPIO13, + AA6_242X_GPIO14, + AA4_242X_GPIO15, + Y11_242X_GPIO16, + AA12_242X_GPIO17, + AA8_242X_GPIO58, + Y20_24XX_GPIO60, + W4__24XX_GPIO74, + N15_24XX_GPIO85, + M15_24XX_GPIO92, + P20_24XX_GPIO93, + P18_24XX_GPIO95, + M18_24XX_GPIO96, + L14_24XX_GPIO97, + J15_24XX_GPIO99, + V14_24XX_GPIO117, + P14_24XX_GPIO125, + + /* 242x DBG GPIO */ + V4_242X_GPIO49, + W2_242X_GPIO50, + U4_242X_GPIO51, + V3_242X_GPIO52, + V2_242X_GPIO53, + V6_242X_GPIO53, + T4_242X_GPIO54, + Y4_242X_GPIO54, + T3_242X_GPIO55, + U2_242X_GPIO56, + + /* 24xx external DMA requests */ + AA10_242X_DMAREQ0, + AA6_242X_DMAREQ1, + E4_242X_DMAREQ2, + G4_242X_DMAREQ3, + D3_242X_DMAREQ4, + E3_242X_DMAREQ5, + + /* UART3 */ + K15_24XX_UART3_TX, + K14_24XX_UART3_RX, + + /* MMC/SDIO */ + G19_24XX_MMC_CLKO, + H18_24XX_MMC_CMD, + F20_24XX_MMC_DAT0, + H14_24XX_MMC_DAT1, + E19_24XX_MMC_DAT2, + D19_24XX_MMC_DAT3, + F19_24XX_MMC_DAT_DIR0, + E20_24XX_MMC_DAT_DIR1, + F18_24XX_MMC_DAT_DIR2, + E18_24XX_MMC_DAT_DIR3, + G18_24XX_MMC_CMD_DIR, + H15_24XX_MMC_CLKI, + + /* Full speed USB */ + J20_24XX_USB0_PUEN, + J19_24XX_USB0_VP, + K20_24XX_USB0_VM, + J18_24XX_USB0_RCV, + K19_24XX_USB0_TXEN, + J14_24XX_USB0_SE0, + K18_24XX_USB0_DAT, + + N14_24XX_USB1_SE0, + W12_24XX_USB1_SE0, + P15_24XX_USB1_DAT, + R13_24XX_USB1_DAT, + W20_24XX_USB1_TXEN, + P13_24XX_USB1_TXEN, + V19_24XX_USB1_RCV, + V12_24XX_USB1_RCV, + + AA10_24XX_USB2_SE0, + Y11_24XX_USB2_DAT, + AA12_24XX_USB2_TXEN, + AA6_24XX_USB2_RCV, + AA4_24XX_USB2_TLLSE0, + + /* Keypad GPIO*/ + T19_24XX_KBR0, + R19_24XX_KBR1, + V18_24XX_KBR2, + M21_24XX_KBR3, + E5__24XX_KBR4, + M18_24XX_KBR5, + R20_24XX_KBC0, + M14_24XX_KBC1, + H19_24XX_KBC2, + V17_24XX_KBC3, + P21_24XX_KBC4, + L14_24XX_KBC5, + N19_24XX_KBC6, + + /* 24xx Menelaus Keypad GPIO */ + B3__24XX_KBR5, + AA4_24XX_KBC2, + B13_24XX_KBC6, + + /* 2430 USB */ + AD9_2430_USB0_PUEN, + Y11_2430_USB0_VP, + AD7_2430_USB0_VM, + AE7_2430_USB0_RCV, + AD4_2430_USB0_TXEN, + AF9_2430_USB0_SE0, + AE6_2430_USB0_DAT, + AD24_2430_USB1_SE0, + AB24_2430_USB1_RCV, + Y25_2430_USB1_TXEN, + AA26_2430_USB1_DAT, + + /* 2430 HS-USB */ + AD9_2430_USB0HS_DATA3, + Y11_2430_USB0HS_DATA4, + AD7_2430_USB0HS_DATA5, + AE7_2430_USB0HS_DATA6, + AD4_2430_USB0HS_DATA2, + AF9_2430_USB0HS_DATA0, + AE6_2430_USB0HS_DATA1, + AE8_2430_USB0HS_CLK, + AD8_2430_USB0HS_DIR, + AE5_2430_USB0HS_STP, + AE9_2430_USB0HS_NXT, + AC7_2430_USB0HS_DATA7, + + /* 2430 McBSP */ + AD6_2430_MCBSP_CLKS, + + AB2_2430_MCBSP1_CLKR, + AD5_2430_MCBSP1_FSR, + AA1_2430_MCBSP1_DX, + AF3_2430_MCBSP1_DR, + AB3_2430_MCBSP1_FSX, + Y9_2430_MCBSP1_CLKX, + + AC10_2430_MCBSP2_FSX, + AD16_2430_MCBSP2_CLX, + AE13_2430_MCBSP2_DX, + AD13_2430_MCBSP2_DR, + AC10_2430_MCBSP2_FSX_OFF, + AD16_2430_MCBSP2_CLX_OFF, + AE13_2430_MCBSP2_DX_OFF, + AD13_2430_MCBSP2_DR_OFF, + + AC9_2430_MCBSP3_CLKX, + AE4_2430_MCBSP3_FSX, + AE2_2430_MCBSP3_DR, + AF4_2430_MCBSP3_DX, + + N3_2430_MCBSP4_CLKX, + AD23_2430_MCBSP4_DR, + AB25_2430_MCBSP4_DX, + AC25_2430_MCBSP4_FSX, + + AE16_2430_MCBSP5_CLKX, + AF12_2430_MCBSP5_FSX, + K7_2430_MCBSP5_DX, + M1_2430_MCBSP5_DR, + + /* 2430 McSPI*/ + Y18_2430_MCSPI1_CLK, + AD15_2430_MCSPI1_SIMO, + AE17_2430_MCSPI1_SOMI, + U1_2430_MCSPI1_CS0, + + /* Touchscreen GPIO */ + AF19_2430_GPIO_85, + +}; + +enum omap34xx_index { + /* 34xx I2C */ + K21_34XX_I2C1_SCL, + J21_34XX_I2C1_SDA, + AF15_34XX_I2C2_SCL, + AE15_34XX_I2C2_SDA, + AF14_34XX_I2C3_SCL, + AG14_34XX_I2C3_SDA, + AD26_34XX_I2C4_SCL, + AE26_34XX_I2C4_SDA, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + Y8_3430_USB1HS_PHY_CLK, + Y9_3430_USB1HS_PHY_STP, + AA14_3430_USB1HS_PHY_DIR, + AA11_3430_USB1HS_PHY_NXT, + W13_3430_USB1HS_PHY_DATA0, + W12_3430_USB1HS_PHY_DATA1, + W11_3430_USB1HS_PHY_DATA2, + Y11_3430_USB1HS_PHY_DATA3, + W9_3430_USB1HS_PHY_DATA4, + Y12_3430_USB1HS_PHY_DATA5, + W8_3430_USB1HS_PHY_DATA6, + Y13_3430_USB1HS_PHY_DATA7, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ + AA8_3430_USB2HS_PHY_CLK, + AA10_3430_USB2HS_PHY_STP, + AA9_3430_USB2HS_PHY_DIR, + AB11_3430_USB2HS_PHY_NXT, + AB10_3430_USB2HS_PHY_DATA0, + AB9_3430_USB2HS_PHY_DATA1, + W3_3430_USB2HS_PHY_DATA2, + T4_3430_USB2HS_PHY_DATA3, + T3_3430_USB2HS_PHY_DATA4, + R3_3430_USB2HS_PHY_DATA5, + R4_3430_USB2HS_PHY_DATA6, + T2_3430_USB2HS_PHY_DATA7, + + + /* TLL - HSUSB: 12-pin TLL Port 1*/ + Y8_3430_USB1HS_TLL_CLK, + Y9_3430_USB1HS_TLL_STP, + AA14_3430_USB1HS_TLL_DIR, + AA11_3430_USB1HS_TLL_NXT, + W13_3430_USB1HS_TLL_DATA0, + W12_3430_USB1HS_TLL_DATA1, + W11_3430_USB1HS_TLL_DATA2, + Y11_3430_USB1HS_TLL_DATA3, + W9_3430_USB1HS_TLL_DATA4, + Y12_3430_USB1HS_TLL_DATA5, + W8_3430_USB1HS_TLL_DATA6, + Y13_3430_USB1HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 2*/ + AA8_3430_USB2HS_TLL_CLK, + AA10_3430_USB2HS_TLL_STP, + AA9_3430_USB2HS_TLL_DIR, + AB11_3430_USB2HS_TLL_NXT, + AB10_3430_USB2HS_TLL_DATA0, + AB9_3430_USB2HS_TLL_DATA1, + W3_3430_USB2HS_TLL_DATA2, + T4_3430_USB2HS_TLL_DATA3, + T3_3430_USB2HS_TLL_DATA4, + R3_3430_USB2HS_TLL_DATA5, + R4_3430_USB2HS_TLL_DATA6, + T2_3430_USB2HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 3*/ + AA6_3430_USB3HS_TLL_CLK, + AB3_3430_USB3HS_TLL_STP, + AA3_3430_USB3HS_TLL_DIR, + Y3_3430_USB3HS_TLL_NXT, + AA5_3430_USB3HS_TLL_DATA0, + Y4_3430_USB3HS_TLL_DATA1, + Y5_3430_USB3HS_TLL_DATA2, + W5_3430_USB3HS_TLL_DATA3, + AB12_3430_USB3HS_TLL_DATA4, + AB13_3430_USB3HS_TLL_DATA5, + AA13_3430_USB3HS_TLL_DATA6, + AA12_3430_USB3HS_TLL_DATA7, + + /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ + AF10_3430_USB1FS_PHY_MM1_RXDP, + AG9_3430_USB1FS_PHY_MM1_RXDM, + W13_3430_USB1FS_PHY_MM1_RXRCV, + W12_3430_USB1FS_PHY_MM1_TXSE0, + W11_3430_USB1FS_PHY_MM1_TXDAT, + Y11_3430_USB1FS_PHY_MM1_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ + AF7_3430_USB2FS_PHY_MM2_RXDP, + AH7_3430_USB2FS_PHY_MM2_RXDM, + AB10_3430_USB2FS_PHY_MM2_RXRCV, + AB9_3430_USB2FS_PHY_MM2_TXSE0, + W3_3430_USB2FS_PHY_MM2_TXDAT, + T4_3430_USB2FS_PHY_MM2_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ + AH3_3430_USB3FS_PHY_MM3_RXDP, + AE3_3430_USB3FS_PHY_MM3_RXDM, + AD1_3430_USB3FS_PHY_MM3_RXRCV, + AE1_3430_USB3FS_PHY_MM3_TXSE0, + AD2_3430_USB3FS_PHY_MM3_TXDAT, + AC1_3430_USB3FS_PHY_MM3_TXEN_N, + + /* 34xx GPIO + * - normally these are bidirectional, no internal pullup/pulldown + * - "_UP" suffix (GPIO3_UP) if internal pullup is configured + * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown + * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) + */ + AF26_34XX_GPIO0, + AF22_34XX_GPIO9, + AG9_34XX_GPIO23, + AH8_34XX_GPIO29, + U8_34XX_GPIO54_OUT, + U8_34XX_GPIO54_DOWN, + L8_34XX_GPIO63, + G25_34XX_GPIO86_OUT, + AG4_34XX_GPIO134_OUT, + AF4_34XX_GPIO135_OUT, + AE4_34XX_GPIO136_OUT, + AF6_34XX_GPIO140_UP, + AE6_34XX_GPIO141, + AF5_34XX_GPIO142, + AE5_34XX_GPIO143, + H19_34XX_GPIO164_OUT, + J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, + + /* MMC1 */ + N28_3430_MMC1_CLK, + M27_3430_MMC1_CMD, + N27_3430_MMC1_DAT0, + N26_3430_MMC1_DAT1, + N25_3430_MMC1_DAT2, + P28_3430_MMC1_DAT3, + P27_3430_MMC1_DAT4, + P26_3430_MMC1_DAT5, + R27_3430_MMC1_DAT6, + R25_3430_MMC1_DAT7, + + /* MMC2 */ + AE2_3430_MMC2_CLK, + AG5_3430_MMC2_CMD, + AH5_3430_MMC2_DAT0, + AH4_3430_MMC2_DAT1, + AG4_3430_MMC2_DAT2, + AF4_3430_MMC2_DAT3, + + /* MMC3 */ + AF10_3430_MMC3_CLK, + AC3_3430_MMC3_CMD, + AE11_3430_MMC3_DAT0, + AH9_3430_MMC3_DAT1, + AF13_3430_MMC3_DAT2, + AF13_3430_MMC3_DAT3, + + /* SYS_NIRQ T2 INT1 */ + AF26_34XX_SYS_NIRQ, +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); +}; + +#ifdef CONFIG_OMAP_MUX +/* setup pin muxing in Linux */ +extern int omap1_mux_init(void); +extern int omap2_mux_init(void); +extern int omap_mux_register(struct omap_mux_cfg *); +extern int omap_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ +static inline int omap1_mux_init(void) { return 0; } +static inline int omap2_mux_init(void) { return 0; } +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h new file mode 100644 index 000000000000..631a7bed1eef --- /dev/null +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/mach/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +struct omap_nand_platform_data { + unsigned int options; + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*nand_setup)(void __iomem *); + int (*dev_ready)(struct omap_nand_platform_data *); + int dma_channel; + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; +}; diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h new file mode 100644 index 000000000000..b53055b390d0 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-alsa.h @@ -0,0 +1,123 @@ +/* + * arch/arm/plat-omap/include/mach/omap-alsa.h + * + * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. + * + * Copyright (C) 2006 Mika Laitio + * + * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil + * Written by Daniel Petrini, David Cohen, Anderson Briglia + * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History + * ------- + * + * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, + * original version based in sa1100 driver + * and omap oss driver. + */ + +#ifndef __OMAP_ALSA_H +#define __OMAP_ALSA_H + +#include +#include +#include +#include +#include + +#define DMA_BUF_SIZE (1024 * 8) + +/* + * Buffer management for alsa and dma + */ +struct audio_stream { + char *id; /* identification string */ + int stream_id; /* numeric identification */ + int dma_dev; /* dma number of that device */ + int *lch; /* Chain of channels this stream is linked to */ + char started; /* to store if the chain was started or not */ + int dma_q_head; /* DMA Channel Q Head */ + int dma_q_tail; /* DMA Channel Q Tail */ + char dma_q_count; /* DMA Channel Q Count */ + int active:1; /* we are using this stream for transfer now */ + int period; /* current transfer period */ + int periods; /* current count of periods registerd in the DMA engine */ + spinlock_t dma_lock; /* for locking in DMA operations */ + struct snd_pcm_substream *stream; /* the pcm stream */ + unsigned linked:1; /* dma channels linked */ + int offset; /* store start position of the last period in the alsa buffer */ + int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ + int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ +}; + +/* + * Alsa card structure for aic23 + */ +struct snd_card_omap_codec { + struct snd_card *card; + struct snd_pcm *pcm; + long samplerate; + struct audio_stream s[2]; /* playback & capture */ +}; + +/* Codec specific information and function pointers. + * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) + * are responsible for defining the function pointers. + */ +struct omap_alsa_codec_config { + char *name; + struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; + struct snd_pcm_hw_constraint_list *hw_constraints_rates; + struct snd_pcm_hardware *snd_omap_alsa_playback; + struct snd_pcm_hardware *snd_omap_alsa_capture; + void (*codec_configure_dev)(void); + void (*codec_set_samplerate)(long); + void (*codec_clock_setup)(void); + int (*codec_clock_on)(void); + int (*codec_clock_off)(void); + int (*get_default_samplerate)(void); +}; + +/*********** Mixer function prototypes *************************/ +int snd_omap_mixer(struct snd_card_omap_codec *); +void snd_omap_init_mixer(void); + +#ifdef CONFIG_PM +void snd_omap_suspend_mixer(void); +void snd_omap_resume_mixer(void); +#endif + +int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); +int snd_omap_alsa_remove(struct platform_device *pdev); +#ifdef CONFIG_PM +int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); +int snd_omap_alsa_resume(struct platform_device *pdev); +#else +#define snd_omap_alsa_suspend NULL +#define snd_omap_alsa_resume NULL +#endif + +void callback_omap_alsa_sound_dma(void *); + +#endif diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h new file mode 100644 index 000000000000..3ee41d711492 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -0,0 +1,301 @@ +/* + * omap-pm.h - OMAP power management interface + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * Paul Walmsley + * + * Interface developed by (in alphabetical order): Karthik Dasu, Jouni + * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, + * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, + * Richard Woodruff + */ + +#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H +#define ASM_ARM_ARCH_OMAP_OMAP_PM_H + +#include +#include + +#include "powerdomain.h" + +/** + * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU + * @rate: target clock rate + * @opp_id: OPP ID + * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP + * + * Operating performance point data. Can vary by OMAP chip and board. + */ +struct omap_opp { + unsigned long rate; + u8 opp_id; + u16 min_vdd; +}; + +extern struct omap_opp *mpu_opps; +extern struct omap_opp *dsp_opps; +extern struct omap_opp *l3_opps; + +/* + * agent_id values for use with omap_pm_set_min_bus_tput(): + * + * OCP_INITIATOR_AGENT is only valid for devices that can act as + * initiators -- it represents the device's L3 interconnect + * connection. OCP_TARGET_AGENT represents the device's L4 + * interconnect connection. + */ +#define OCP_TARGET_AGENT 1 +#define OCP_INITIATOR_AGENT 2 + +/** + * omap_pm_if_early_init - OMAP PM init code called before clock fw init + * @mpu_opp_table: array ptr to struct omap_opp for MPU + * @dsp_opp_table: array ptr to struct omap_opp for DSP + * @l3_opp_table : array ptr to struct omap_opp for CORE + * + * Initialize anything that must be configured before the clock + * framework starts. The "_if_" is to avoid name collisions with the + * PM idle-loop code. + */ +int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table, + struct omap_opp *dsp_opp_table, + struct omap_opp *l3_opp_table); + +/** + * omap_pm_if_init - OMAP PM init code called after clock fw init + * + * The main initialization code. OPP tables are passed in here. The + * "_if_" is to avoid name collisions with the PM idle-loop code. + */ +int __init omap_pm_if_init(void); + +/** + * omap_pm_if_exit - OMAP PM exit code + * + * Exit code; currently unused. The "_if_" is to avoid name + * collisions with the PM idle-loop code. + */ +void omap_pm_if_exit(void); + +/* + * Device-driver-originated constraints (via board-*.c files, platform_data) + */ + + +/** + * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency + * @dev: struct device * requesting the constraint + * @t: maximum MPU wakeup latency in microseconds + * + * Request that the maximum interrupt latency for the MPU to be no + * greater than 't' microseconds. "Interrupt latency" in this case is + * defined as the elapsed time from the occurrence of a hardware or + * timer interrupt to the time when the device driver's interrupt + * service routine has been entered by the MPU. + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the MPU powerdomain into, and + * possibly the CORE powerdomain as well, since interrupt handling + * code currently runs from SDRAM. Advanced PM or board*.c code may + * also configure interrupt controller priorities, OCP bus priorities, + * CPU speed(s), etc. + * + * This function will not affect device wakeup latency, e.g., time + * elapsed from when a device driver enables a hardware device with + * clk_enable(), to when the device is ready for register access or + * other use. To control this device wakeup latency, use + * set_max_dev_wakeup_lat() + * + * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * previous t value. To remove the latency target for the MPU, call + * with t = -1. + * + * No return value. + */ +void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); + + +/** + * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device + * @dev: struct device * requesting the constraint + * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) + * @r: minimum throughput (in KiB/s) + * + * Request that the minimum data throughput on the OCP interconnect + * attached to device 'dev' interconnect agent 'tbus_id' be no less + * than 'r' KiB/s. + * + * It is expected that the OMAP PM or bus code will use this + * information to set the interconnect clock to run at the lowest + * possible speed that satisfies all current system users. The PM or + * bus code will adjust the estimate based on its model of the bus, so + * device driver authors should attempt to specify an accurate + * quantity for their device use case, and let the PM or bus code + * overestimate the numbers as necessary to handle request/response + * latency, other competing users on the system, etc. On OMAP2/3, if + * a driver requests a minimum L4 interconnect speed constraint, the + * code will also need to add an minimum L3 interconnect speed + * constraint, + * + * Multiple calls to set_min_bus_tput() will replace the previous rate + * value for this device. To remove the interconnect throughput + * restriction for this device, call with r = 0. + * + * No return value. + */ +void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); + + +/** + * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency + * @dev: struct device * + * @t: maximum device wakeup latency in microseconds + * + * Request that the maximum amount of time necessary for a device to + * become accessible after its clocks are enabled should be no greater + * than 't' microseconds. Specifically, this represents the time from + * when a device driver enables device clocks with clk_enable(), to + * when the register reads and writes on the device will succeed. + * This function should be called before clk_disable() is called, + * since the power state transition decision may be made during + * clk_disable(). + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the powerdomain enclosing this + * device into. + * + * Multiple calls to set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the wakeup + * latency restriction for this device, call with t = -1. + * + * No return value. + */ +void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); + + +/** + * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency + * @dev: struct device * + * @t: maximum DMA transfer start latency in microseconds + * + * Request that the maximum system DMA transfer start latency for this + * device 'dev' should be no greater than 't' microseconds. "DMA + * transfer start latency" here is defined as the elapsed time from + * when a device (e.g., McBSP) requests that a system DMA transfer + * start or continue, to the time at which data starts to flow into + * that device from the system DMA controller. + * + * It is intended that underlying PM code will use this information to + * determine what power state to put the CORE powerdomain into. + * + * Since system DMA transfers may not involve the MPU, this function + * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do + * so. Similarly, this function will not affect device wakeup latency + * -- use set_max_dev_wakeup_lat() to affect that. + * + * Multiple calls to set_max_sdma_lat() will replace the previous t + * value for this device. To remove the maximum DMA latency for this + * device, call with t = -1. + * + * No return value. + */ +void omap_pm_set_max_sdma_lat(struct device *dev, long t); + + +/* + * DSP Bridge-specific constraints + */ + +/** + * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table + * + * Intended for use by DSPBridge. Returns an array of OPP->DSP clock + * frequency entries. The final item in the array should have .rate = + * .opp_id = 0. + */ +const struct omap_opp *omap_pm_dsp_get_opp_table(void); + +/** + * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge + * @opp_id: target DSP OPP ID + * + * Set a minimum OPP ID for the DSP. This is intended to be called + * only from the DSP Bridge MPU-side driver. Unfortunately, the only + * information that code receives from the DSP/BIOS load estimator is the + * target OPP ID; hence, this interface. No return value. + */ +void omap_pm_dsp_set_min_opp(u8 opp_id); + +/** + * omap_pm_dsp_get_opp - report the current DSP OPP ID + * + * Report the current OPP for the DSP. Since on OMAP3, the DSP and + * MPU share a single voltage domain, the OPP ID returned back may + * represent a higher DSP speed than the OPP requested via + * omap_pm_dsp_set_min_opp(). + * + * Returns the current VDD1 OPP ID, or 0 upon error. + */ +u8 omap_pm_dsp_get_opp(void); + + +/* + * CPUFreq-originated constraint + * + * In the future, this should be handled by custom OPP clocktype + * functions. + */ + +/** + * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr + * + * Provide a frequency table usable by CPUFreq for the current chip/board. + * Returns a pointer to a struct cpufreq_frequency_table array or NULL + * upon error. + */ +struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); + +/** + * omap_pm_cpu_set_freq - set the current minimum MPU frequency + * @f: MPU frequency in Hz + * + * Set the current minimum CPU frequency. The actual CPU frequency + * used could end up higher if the DSP requested a higher OPP. + * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No + * return value. + */ +void omap_pm_cpu_set_freq(unsigned long f); + +/** + * omap_pm_cpu_get_freq - report the current CPU frequency + * + * Returns the current MPU frequency, or 0 upon error. + */ +unsigned long omap_pm_cpu_get_freq(void); + + +/* + * Device context loss tracking + */ + +/** + * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx + * @dev: struct device * + * + * This function returns the number of times that the device @dev has + * lost its internal context. This generally occurs on a powerdomain + * transition to OFF. Drivers use this as an optimization to avoid restoring + * context if the device hasn't lost it. To use, drivers should initially + * call this in their context save functions and store the result. Early in + * the driver's context restore function, the driver should call this function + * again, and compare the result to the stored counter. If they differ, the + * driver must restore device context. If the number of context losses + * exceeds the maximum positive integer, the function will wrap to 0 and + * continue counting. Returns the number of context losses for this device, + * or -EINVAL upon error. + */ +int omap_pm_get_dev_context_loss_count(struct device *dev); + + +#endif diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h new file mode 100644 index 000000000000..d24004668138 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap1510.h @@ -0,0 +1,50 @@ +/* arch/arm/plat-omap/include/mach/omap1510.h + * + * Hardware definitions for TI OMAP1510 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP15XX_H +#define __ASM_ARCH_OMAP15XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP1510_DSP_BASE 0xE0000000 +#define OMAP1510_DSP_SIZE 0x28000 +#define OMAP1510_DSP_START 0xE0000000 + +#define OMAP1510_DSPREG_BASE 0xE1000000 +#define OMAP1510_DSPREG_SIZE SZ_128K +#define OMAP1510_DSPREG_START 0xE1000000 + +#define OMAP1510_DSP_MMU_BASE (0xfffed200) + +#endif /* __ASM_ARCH_OMAP15XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h new file mode 100644 index 000000000000..0e69b504c25f --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap16xx.h @@ -0,0 +1,202 @@ +/* arch/arm/plat-omap/include/mach/omap16xx.h + * + * Hardware definitions for TI OMAP1610/5912/1710 processors. + * + * Cleanup for Linux-2.6 by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP16XX_H +#define __ASM_ARCH_OMAP16XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP16XX_DSP_BASE 0xE0000000 +#define OMAP16XX_DSP_SIZE 0x28000 +#define OMAP16XX_DSP_START 0xE0000000 + +#define OMAP16XX_DSPREG_BASE 0xE1000000 +#define OMAP16XX_DSPREG_SIZE SZ_128K +#define OMAP16XX_DSPREG_START 0xE1000000 + +#define OMAP16XX_SEC_BASE 0xFFFE4000 +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH2_0_BASE (0xfffe0000) +#define OMAP_IH2_1_BASE (0xfffe0100) +#define OMAP_IH2_2_BASE (0xfffe0200) +#define OMAP_IH2_3_BASE (0xfffe0300) + +#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) +#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) +#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) +#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) +#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) +#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) +#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) + +#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) +#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) +#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) +#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) +#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) +#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) +#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) + +#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) +#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) +#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) +#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) +#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) +#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) +#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) + +#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) +#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) +#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) +#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) +#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) +#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) +#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* + * ---------------------------------------------------------------------------- + * Pin configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) +#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP1610_RESET_CONTROL 0xfffe1140 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_SWITCH_BASE (0xfffbc800) +#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) + +/* UART3 Registers Maping through MPU bus */ +#define UART3_RHR (OMAP_UART3_BASE + 0) +#define UART3_THR (OMAP_UART3_BASE + 0) +#define UART3_DLL (OMAP_UART3_BASE + 0) +#define UART3_IER (OMAP_UART3_BASE + 4) +#define UART3_DLH (OMAP_UART3_BASE + 4) +#define UART3_IIR (OMAP_UART3_BASE + 8) +#define UART3_FCR (OMAP_UART3_BASE + 8) +#define UART3_EFR (OMAP_UART3_BASE + 8) +#define UART3_LCR (OMAP_UART3_BASE + 0x0C) +#define UART3_MCR (OMAP_UART3_BASE + 0x10) +#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) +#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) +#define UART3_LSR (OMAP_UART3_BASE + 0x14) +#define UART3_TCR (OMAP_UART3_BASE + 0x18) +#define UART3_MSR (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) +#define UART3_SPR (OMAP_UART3_BASE + 0x1C) +#define UART3_TLR (OMAP_UART3_BASE + 0x1C) +#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) +#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) +#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) +#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) +#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) +#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) +#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) +#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) +#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) +#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) +#define UART3_BLR (OMAP_UART3_BASE + 0x38) +#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) +#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) +#define UART3_SCR (OMAP_UART3_BASE + 0x40) +#define UART3_SSR (OMAP_UART3_BASE + 0x44) +#define UART3_EBLR (OMAP_UART3_BASE + 0x48) +#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) +#define UART3_MVR (OMAP_UART3_BASE + 0x50) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* 32-bit Watchdog timer in OMAP 16XX */ +#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) +#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) +#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) +#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) +#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) +#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) +#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) +#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) +#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) +#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) + +#define WCLR_PRE_SHIFT 5 +#define WCLR_PTV_SHIFT 2 + +#define WWPS_W_PEND_WSPR (1 << 4) +#define WWPS_W_PEND_WTGR (1 << 3) +#define WWPS_W_PEND_WLDR (1 << 2) +#define WWPS_W_PEND_WCRR (1 << 1) +#define WWPS_W_PEND_WCLR (1 << 0) + +#define WSPR_ENABLE_0 (0x0000bbbb) +#define WSPR_ENABLE_1 (0x00004444) +#define WSPR_DISABLE_0 (0x0000aaaa) +#define WSPR_DISABLE_1 (0x00005555) + +#define OMAP16XX_DSP_MMU_BASE (0xfffed200) +#define OMAP16XX_MAILBOX_BASE (0xfffcf000) + +#endif /* __ASM_ARCH_OMAP16XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h new file mode 100644 index 000000000000..696edfc145a6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap24xx.h @@ -0,0 +1,89 @@ +/* + * arch/arm/plat-omap/include/mach/omap24xx.h + * + * This file contains the processor specific definitions + * of the TI OMAP24XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP24XX_H +#define __ASM_ARCH_OMAP24XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. Note also that some of these defines are needed + * for omap1 to compile without adding ifdefs. + */ + +#define L4_24XX_BASE 0x48000000 +#define L4_WK_243X_BASE 0x49000000 +#define L3_24XX_BASE 0x68000000 + +/* interrupt controller */ +#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) +#define OMAP24XX_IVA_INTC_BASE 0x40000000 + +#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_PRM_BASE OMAP2420_CM_BASE +#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP2420_SMS_BASE 0x68008000 +#define OMAP2420_GPMC_BASE 0x6800a000 + +#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_PRM_BASE OMAP2430_CM_BASE + +#define OMAP243X_SMS_BASE 0x6C000000 +#define OMAP243X_SDRC_BASE 0x6D000000 +#define OMAP243X_GPMC_BASE 0x6E000000 +#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) +#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE +#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) + +/* DSP SS */ +#define OMAP2420_DSP_BASE 0x58000000 +#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) +#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) +#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) + +#define OMAP243X_DSP_BASE 0x5C000000 +#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) +#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) + +/* Mailbox */ +#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) + +/* Camera */ +#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) + +/* Security */ +#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) +#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) +#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) +#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) +#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) +#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) + +#endif /* __ASM_ARCH_OMAP24XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h new file mode 100644 index 000000000000..f8d186a73712 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -0,0 +1,87 @@ +/* + * arch/arm/plat-omap/include/mach/omap34xx.h + * + * This file contains the processor specific definitions of the TI OMAP34XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_OMAP34XX_H +#define __ASM_ARCH_OMAP34XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ + +#define L4_34XX_BASE 0x48000000 +#define L4_WK_34XX_BASE 0x48300000 +#define L4_PER_34XX_BASE 0x49000000 +#define L4_EMU_34XX_BASE 0x54000000 +#define L3_34XX_BASE 0x68000000 + +#define OMAP3430_32KSYNCT_BASE 0x48320000 +#define OMAP3430_CM_BASE 0x48004800 +#define OMAP3430_PRM_BASE 0x48306800 +#define OMAP343X_SMS_BASE 0x6C000000 +#define OMAP343X_SDRC_BASE 0x6D000000 +#define OMAP34XX_GPMC_BASE 0x6E000000 +#define OMAP343X_SCM_BASE 0x48002000 +#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE + +#define OMAP34XX_IC_BASE 0x48200000 + +#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000) +#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100) +#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400) +#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600) +#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00) +#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00) +#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00) +#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) +#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) +#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) +#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800) +#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970) + +#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) +#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) +#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF) +#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7) +#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047) +#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F) +#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F) +#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) +#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) +#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) +#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) +#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) + +#define OMAP34XX_IVA_INTC_BASE 0x40000000 +#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) +#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) +#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) + +#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) + +#define OMAP34XX_DSP_BASE 0x58000000 +#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) +#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) +#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) +#endif /* __ASM_ARCH_OMAP34XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h new file mode 100644 index 000000000000..336189753671 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -0,0 +1,44 @@ +/*: + * Address mappings and base address for OMAP4 interconnects + * and peripherals. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_OMAP44XX_H +#define __ASM_ARCH_OMAP44XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_44XX_BASE 0x4a000000 +#define L4_WK_44XX_BASE 0x4a300000 +#define L4_PER_44XX_BASE 0x48000000 +#define L4_EMU_44XX_BASE 0x54000000 +#define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 +#define OMAP4430_32KSYNCT_BASE 0x4a304000 +#define OMAP4430_CM_BASE 0x4a004000 +#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP44XX_GPMC_BASE 0x50000000 +#define OMAP443X_SCM_BASE 0x4a002000 +#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP44XX_IC_BASE 0x48200000 +#define OMAP44XX_IVA_INTC_BASE 0x40000000 +#define IRQ_SIR_IRQ 0x0040 +#define OMAP44XX_GIC_DIST_BASE 0x48241000 +#define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_SCU_BASE 0x48240000 +#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 +#define OMAP44XX_WKUPGEN_BASE 0x48281000 + +#endif /* __ASM_ARCH_OMAP44XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h new file mode 100644 index 000000000000..14272bc1a6fd --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap730.h @@ -0,0 +1,102 @@ +/* arch/arm/plat-omap/include/mach/omap730.h + * + * Hardware definitions for TI OMAP730 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP730_H +#define __ASM_ARCH_OMAP730_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP730_DSP_BASE 0xE0000000 +#define OMAP730_DSP_SIZE 0x50000 +#define OMAP730_DSP_START 0xE0000000 + +#define OMAP730_DSPREG_BASE 0xE1000000 +#define OMAP730_DSPREG_SIZE SZ_128K +#define OMAP730_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_CONFIG_BASE 0xfffe1000 +#define OMAP730_IO_CONF_0 0xfffe1070 +#define OMAP730_IO_CONF_1 0xfffe1074 +#define OMAP730_IO_CONF_2 0xfffe1078 +#define OMAP730_IO_CONF_3 0xfffe107c +#define OMAP730_IO_CONF_4 0xfffe1080 +#define OMAP730_IO_CONF_5 0xfffe1084 +#define OMAP730_IO_CONF_6 0xfffe1088 +#define OMAP730_IO_CONF_7 0xfffe108c +#define OMAP730_IO_CONF_8 0xfffe1090 +#define OMAP730_IO_CONF_9 0xfffe1094 +#define OMAP730_IO_CONF_10 0xfffe1098 +#define OMAP730_IO_CONF_11 0xfffe109c +#define OMAP730_IO_CONF_12 0xfffe10a0 +#define OMAP730_IO_CONF_13 0xfffe10a4 + +#define OMAP730_MODE_1 0xfffe1010 +#define OMAP730_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP730_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_FLASH_CFG_0 0xfffecc10 +#define OMAP730_FLASH_ACFG_0 0xfffecc50 +#define OMAP730_FLASH_CFG_1 0xfffecc14 +#define OMAP730_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_ICR_BASE 0xfffbb800 +#define OMAP730_DSP_M_CTL 0xfffbb804 +#define OMAP730_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP730_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h new file mode 100644 index 000000000000..53f52414b0e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme + * Adapted for omap850 by Zebediah C. McClure + * Adapted for omap7xx by Alistair Buxton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h new file mode 100644 index 000000000000..c33f67981712 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap850.h @@ -0,0 +1,102 @@ +/* arch/arm/plat-omap/include/mach/omap850.h + * + * Hardware definitions for TI OMAP850 processor. + * + * Derived from omap730.h by Zebediah C. McClure + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP850_H +#define __ASM_ARCH_OMAP850_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP850_DSP_BASE 0xE0000000 +#define OMAP850_DSP_SIZE 0x50000 +#define OMAP850_DSP_START 0xE0000000 + +#define OMAP850_DSPREG_BASE 0xE1000000 +#define OMAP850_DSPREG_SIZE SZ_128K +#define OMAP850_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_CONFIG_BASE 0xfffe1000 +#define OMAP850_IO_CONF_0 0xfffe1070 +#define OMAP850_IO_CONF_1 0xfffe1074 +#define OMAP850_IO_CONF_2 0xfffe1078 +#define OMAP850_IO_CONF_3 0xfffe107c +#define OMAP850_IO_CONF_4 0xfffe1080 +#define OMAP850_IO_CONF_5 0xfffe1084 +#define OMAP850_IO_CONF_6 0xfffe1088 +#define OMAP850_IO_CONF_7 0xfffe108c +#define OMAP850_IO_CONF_8 0xfffe1090 +#define OMAP850_IO_CONF_9 0xfffe1094 +#define OMAP850_IO_CONF_10 0xfffe1098 +#define OMAP850_IO_CONF_11 0xfffe109c +#define OMAP850_IO_CONF_12 0xfffe10a0 +#define OMAP850_IO_CONF_13 0xfffe10a4 + +#define OMAP850_MODE_1 0xfffe1010 +#define OMAP850_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP850_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_FLASH_CFG_0 0xfffecc10 +#define OMAP850_FLASH_ACFG_0 0xfffecc50 +#define OMAP850_FLASH_CFG_1 0xfffecc14 +#define OMAP850_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_ICR_BASE 0xfffbb800 +#define OMAP850_DSP_M_CTL 0xfffbb804 +#define OMAP850_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP850_H */ + diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h new file mode 100644 index 000000000000..11a9773a4e7f --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -0,0 +1,141 @@ +/* + * omap_device headers + * + * Copyright (C) 2009 Nokia Corporation + * Paul Walmsley + * + * Developed in collaboration with (alphabetical order): Benoit + * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram + * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard + * Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Eventually this type of functionality should either be + * a) implemented via arch-specific pointers in platform_device + * or + * b) implemented as a proper omap_bus/omap_device in Linux, no more + * platform_device + * + * omap_device differs from omap_hwmod in that it includes external + * (e.g., board- and system-level) integration details. omap_hwmod + * stores hardware data that is invariant for a given OMAP chip. + * + * To do: + * - GPIO integration + * - regulator integration + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H + +#include +#include + +#include + +/* omap_device._state values */ +#define OMAP_DEVICE_STATE_UNKNOWN 0 +#define OMAP_DEVICE_STATE_ENABLED 1 +#define OMAP_DEVICE_STATE_IDLE 2 +#define OMAP_DEVICE_STATE_SHUTDOWN 3 + +/** + * struct omap_device - omap_device wrapper for platform_devices + * @pdev: platform_device + * @hwmods: (one .. many per omap_device) + * @hwmods_cnt: ARRAY_SIZE() of @hwmods + * @pm_lats: ptr to an omap_device_pm_latency table + * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats + * @pm_lat_level: array index of the last odpl entry executed - -1 if never + * @dev_wakeup_lat: dev wakeup latency in microseconds + * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM + * @_state: one of OMAP_DEVICE_STATE_* (see above) + * @flags: device flags + * + * Integrates omap_hwmod data into Linux platform_device. + * + * Field names beginning with underscores are for the internal use of + * the omap_device code. + * + */ +struct omap_device { + struct platform_device pdev; + struct omap_hwmod **hwmods; + struct omap_device_pm_latency *pm_lats; + u32 dev_wakeup_lat; + u32 _dev_wakeup_lat_limit; + u8 pm_lats_cnt; + s8 pm_lat_level; + u8 hwmods_cnt; + u8 _state; +}; + +/* Device driver interface (call via platform_data fn ptrs) */ + +int omap_device_enable(struct platform_device *pdev); +int omap_device_idle(struct platform_device *pdev); +int omap_device_shutdown(struct platform_device *pdev); + +/* Core code interface */ + +int omap_device_count_resources(struct omap_device *od); +int omap_device_fill_resources(struct omap_device *od, struct resource *res); + +struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, + struct omap_hwmod *oh, void *pdata, + int pdata_len, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); + +struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, + struct omap_hwmod **oh, int oh_cnt, + void *pdata, int pdata_len, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); + +int omap_device_register(struct omap_device *od); + +/* OMAP PM interface */ +int omap_device_align_pm_lat(struct platform_device *pdev, + u32 new_wakeup_lat_limit); +struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); + +/* Other */ + +int omap_device_idle_hwmods(struct omap_device *od); +int omap_device_enable_hwmods(struct omap_device *od); + +int omap_device_disable_clocks(struct omap_device *od); +int omap_device_enable_clocks(struct omap_device *od); + + +/* + * Entries should be kept in latency order ascending + * + * deact_lat is the maximum number of microseconds required to complete + * deactivate_func() at the device's slowest OPP. + * + * act_lat is the maximum number of microseconds required to complete + * activate_func() at the device's slowest OPP. + * + * This will result in some suboptimal power management decisions at fast + * OPPs, but avoids having to recompute all device power management decisions + * if the system shifts from a fast OPP to a slow OPP (in order to meet + * latency requirements). + * + * XXX should deactivate_func/activate_func() take platform_device pointers + * rather than omap_device pointers? + */ +struct omap_device_pm_latency { + u32 deactivate_lat; + int (*deactivate_func)(struct omap_device *od); + u32 activate_lat; + int (*activate_func)(struct omap_device *od); +}; + + +#endif + diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h new file mode 100644 index 000000000000..dbdd123eca16 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -0,0 +1,447 @@ +/* + * omap_hwmod macros, structures + * + * Copyright (C) 2009 Nokia Corporation + * Paul Walmsley + * + * Created in collaboration with (alphabetical order): Benoit Cousson, + * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari + * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * These headers and macros are used to define OMAP on-chip module + * data and their integration with other OMAP modules and Linux. + * + * References: + * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) + * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) + * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) + * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) + * - Open Core Protocol Specification 2.2 + * + * To do: + * - add interconnect error log structures + * - add pinmuxing + * - init_conn_id_bit (CONNID_BIT_VECTOR) + * - implement default hwmod SMS/SDRC flags? + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H + +#include +#include + +#include + +struct omap_device; + +/* OCP SYSCONFIG bit shifts/masks */ +#define SYSC_MIDLEMODE_SHIFT 12 +#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT) +#define SYSC_CLOCKACTIVITY_SHIFT 8 +#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT) +#define SYSC_SIDLEMODE_SHIFT 3 +#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT) +#define SYSC_ENAWAKEUP_SHIFT 2 +#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) +#define SYSC_SOFTRESET_SHIFT 1 +#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) + +/* OCP SYSSTATUS bit shifts/masks */ +#define SYSS_RESETDONE_SHIFT 0 +#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) + +/* Master standby/slave idle mode flags */ +#define HWMOD_IDLEMODE_FORCE (1 << 0) +#define HWMOD_IDLEMODE_NO (1 << 1) +#define HWMOD_IDLEMODE_SMART (1 << 2) + + +/** + * struct omap_hwmod_dma_info - MPU address space handled by the hwmod + * @name: name of the DMA channel (module local name) + * @dma_ch: DMA channel ID + * + * @name should be something short, e.g., "tx" or "rx". It is for use + * by platform_get_resource_byname(). It is defined locally to the + * hwmod. + */ +struct omap_hwmod_dma_info { + const char *name; + u16 dma_ch; +}; + +/** + * struct omap_hwmod_opt_clk - optional clocks used by this hwmod + * @role: "sys", "32k", "tv", etc -- for use in clk_get() + * @clkdev_dev_id: opt clock: clkdev dev_id string + * @clkdev_con_id: opt clock: clkdev con_id string + * @_clk: pointer to the struct clk (filled in at runtime) + * + * The module's interface clock and main functional clock should not + * be added as optional clocks. + */ +struct omap_hwmod_opt_clk { + const char *role; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; +}; + + +/* omap_hwmod_omap2_firewall.flags bits */ +#define OMAP_FIREWALL_L3 (1 << 0) +#define OMAP_FIREWALL_L4 (1 << 1) + +/** + * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data + * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* + * @l4_fw_region: L4 firewall region ID + * @l4_prot_group: L4 protection group ID + * @flags: (see omap_hwmod_omap2_firewall.flags macros above) + */ +struct omap_hwmod_omap2_firewall { + u8 l3_perm_bit; + u8 l4_fw_region; + u8 l4_prot_group; + u8 flags; +}; + + +/* + * omap_hwmod_addr_space.flags bits + * + * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. + * ADDR_TYPE_RT: Address space contains module register target data. + */ +#define ADDR_MAP_ON_INIT (1 << 0) +#define ADDR_TYPE_RT (1 << 1) + +/** + * struct omap_hwmod_addr_space - MPU address space handled by the hwmod + * @pa_start: starting physical address + * @pa_end: ending physical address + * @flags: (see omap_hwmod_addr_space.flags macros above) + * + * Address space doesn't necessarily follow physical interconnect + * structure. GPMC is one example. + */ +struct omap_hwmod_addr_space { + u32 pa_start; + u32 pa_end; + u8 flags; +}; + + +/* + * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this + * interface to interact with the hwmod. Used to add sleep dependencies + * when the module is enabled or disabled. + */ +#define OCP_USER_MPU (1 << 0) +#define OCP_USER_SDMA (1 << 1) + +/* omap_hwmod_ocp_if.flags bits */ +#define OCPIF_HAS_IDLEST (1 << 0) +#define OCPIF_SWSUP_IDLE (1 << 1) +#define OCPIF_CAN_BURST (1 << 2) + +/** + * struct omap_hwmod_ocp_if - OCP interface data + * @master: struct omap_hwmod that initiates OCP transactions on this link + * @slave: struct omap_hwmod that responds to OCP transactions on this link + * @addr: address space associated with this link + * @clkdev_dev_id: interface clock: clkdev dev_id string + * @clkdev_con_id: interface clock: clkdev con_id string + * @_clk: pointer to the interface struct clk (filled in at runtime) + * @fw: interface firewall data + * @addr_cnt: ARRAY_SIZE(@addr) + * @width: OCP data width + * @thread_cnt: number of threads + * @max_burst_len: maximum burst length in @width sized words (0 if unlimited) + * @user: initiators using this interface (see OCP_USER_* macros above) + * @flags: OCP interface flags (see OCPIF_* macros above) + * + * It may also be useful to add a tag_cnt field for OCP2.x devices. + * + * Parameter names beginning with an underscore are managed internally by + * the omap_hwmod code and should not be set during initialization. + */ +struct omap_hwmod_ocp_if { + struct omap_hwmod *master; + struct omap_hwmod *slave; + struct omap_hwmod_addr_space *addr; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; + union { + struct omap_hwmod_omap2_firewall omap2; + } fw; + u8 addr_cnt; + u8 width; + u8 thread_cnt; + u8 max_burst_len; + u8 user; + u8 flags; +}; + + +/* Macros for use in struct omap_hwmod_sysconfig */ + +/* Flags for use in omap_hwmod_sysconfig.idlemodes */ +#define MASTER_STANDBY_SHIFT 2 +#define SLAVE_IDLE_SHIFT 0 +#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) +#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) +#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) +#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) +#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) +#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) + +/* omap_hwmod_sysconfig.sysc_flags capability flags */ +#define SYSC_HAS_AUTOIDLE (1 << 0) +#define SYSC_HAS_SOFTRESET (1 << 1) +#define SYSC_HAS_ENAWAKEUP (1 << 2) +#define SYSC_HAS_EMUFREE (1 << 3) +#define SYSC_HAS_CLOCKACTIVITY (1 << 4) +#define SYSC_HAS_SIDLEMODE (1 << 5) +#define SYSC_HAS_MIDLEMODE (1 << 6) +#define SYSS_MISSING (1 << 7) + +/* omap_hwmod_sysconfig.clockact flags */ +#define CLOCKACT_TEST_BOTH 0x0 +#define CLOCKACT_TEST_MAIN 0x1 +#define CLOCKACT_TEST_ICLK 0x2 +#define CLOCKACT_TEST_NONE 0x3 + +/** + * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data + * @rev_offs: IP block revision register offset (from module base addr) + * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) + * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} + * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported + * @clockact: the default value of the module CLOCKACTIVITY bits + * + * @clockact describes to the module which clocks are likely to be + * disabled when the PRCM issues its idle request to the module. Some + * modules have separate clockdomains for the interface clock and main + * functional clock, and can check whether they should acknowledge the + * idle request based on the internal module functionality that has + * been associated with the clocks marked in @clockact. This field is + * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) + * + */ +struct omap_hwmod_sysconfig { + u16 rev_offs; + u16 sysc_offs; + u16 syss_offs; + u8 idlemodes; + u8 sysc_flags; + u8 clockact; +}; + +/** + * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data + * @module_offs: PRCM submodule offset from the start of the PRM/CM + * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) + * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs + * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) + * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit + * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit + * + * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, + * WKEN, GRPSEL registers. In an ideal world, no extra information + * would be needed for IDLEST information, but alas, there are some + * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit + * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) + */ +struct omap_hwmod_omap2_prcm { + s16 module_offs; + u8 prcm_reg_id; + u8 module_bit; + u8 idlest_reg_id; + u8 idlest_idle_bit; + u8 idlest_stdby_bit; +}; + + +/** + * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data + * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2 + * @device_offs: device register offset from @module_offs + * @submodule_wkdep_bit: bit shift of the WKDEP range + */ +struct omap_hwmod_omap4_prcm { + u32 module_offs; + u16 device_offs; + u8 submodule_wkdep_bit; +}; + + +/* + * omap_hwmod.flags definitions + * + * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out + * of idle, rather than relying on module smart-idle + * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out + * of standby, rather than relying on module smart-standby + * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for + * SDRAM controller, etc. + * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM + * controller, etc. + * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup + */ +#define HWMOD_SWSUP_SIDLE (1 << 0) +#define HWMOD_SWSUP_MSTANDBY (1 << 1) +#define HWMOD_INIT_NO_RESET (1 << 2) +#define HWMOD_INIT_NO_IDLE (1 << 3) +#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) + +/* + * omap_hwmod._int_flags definitions + * These are for internal use only and are managed by the omap_hwmod code. + * + * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module + * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP + * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached + */ +#define _HWMOD_NO_MPU_PORT (1 << 0) +#define _HWMOD_WAKEUP_ENABLED (1 << 1) +#define _HWMOD_SYSCONFIG_LOADED (1 << 2) + +/* + * omap_hwmod._state definitions + * + * INITIALIZED: reset (optionally), initialized, enabled, disabled + * (optionally) + * + * + */ +#define _HWMOD_STATE_UNKNOWN 0 +#define _HWMOD_STATE_REGISTERED 1 +#define _HWMOD_STATE_CLKS_INITED 2 +#define _HWMOD_STATE_INITIALIZED 3 +#define _HWMOD_STATE_ENABLED 4 +#define _HWMOD_STATE_IDLE 5 +#define _HWMOD_STATE_DISABLED 6 + +/** + * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) + * @name: name of the hwmod + * @od: struct omap_device currently associated with this hwmod (internal use) + * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) + * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) + * @prcm: PRCM data pertaining to this hwmod + * @clkdev_dev_id: main clock: clkdev dev_id string + * @clkdev_con_id: main clock: clkdev con_id string + * @_clk: pointer to the main struct clk (filled in at runtime) + * @opt_clks: other device clocks that drivers can request (0..*) + * @masters: ptr to array of OCP ifs that this hwmod can initiate on + * @slaves: ptr to array of OCP ifs that this hwmod can respond on + * @sysconfig: device SYSCONFIG/SYSSTATUS register data + * @dev_attr: arbitrary device attributes that can be passed to the driver + * @_sysc_cache: internal-use hwmod flags + * @_rt_va: cached register target start address (internal use) + * @_mpu_port_index: cached MPU register target slave ID (internal use) + * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) + * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift + * @mpu_irqs_cnt: number of @mpu_irqs + * @sdma_chs_cnt: number of @sdma_chs + * @opt_clks_cnt: number of @opt_clks + * @master_cnt: number of @master entries + * @slaves_cnt: number of @slave entries + * @response_lat: device OCP response latency (in interface clock cycles) + * @_int_flags: internal-use hwmod flags + * @_state: internal-use hwmod state + * @flags: hwmod flags (documented below) + * @omap_chip: OMAP chips this hwmod is present on + * @node: list node for hwmod list (internal use) + * + * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main + * clock," which for our purposes is defined as "the functional clock needed + * for register accesses to complete." Modules may not have a main clock if + * the interface clock also serves as a main clock. + * + * Parameter names beginning with an underscore are managed internally by + * the omap_hwmod code and should not be set during initialization. + */ +struct omap_hwmod { + const char *name; + struct omap_device *od; + u8 *mpu_irqs; + struct omap_hwmod_dma_info *sdma_chs; + union { + struct omap_hwmod_omap2_prcm omap2; + struct omap_hwmod_omap4_prcm omap4; + } prcm; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; + struct omap_hwmod_opt_clk *opt_clks; + struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ + struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ + struct omap_hwmod_sysconfig *sysconfig; + void *dev_attr; + u32 _sysc_cache; + void __iomem *_rt_va; + struct list_head node; + u16 flags; + u8 _mpu_port_index; + u8 msuspendmux_reg_id; + u8 msuspendmux_shift; + u8 response_lat; + u8 mpu_irqs_cnt; + u8 sdma_chs_cnt; + u8 opt_clks_cnt; + u8 masters_cnt; + u8 slaves_cnt; + u8 hwmods_cnt; + u8 _int_flags; + u8 _state; + const struct omap_chip_id omap_chip; +}; + +int omap_hwmod_init(struct omap_hwmod **ohs); +int omap_hwmod_register(struct omap_hwmod *oh); +int omap_hwmod_unregister(struct omap_hwmod *oh); +struct omap_hwmod *omap_hwmod_lookup(const char *name); +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); +int omap_hwmod_late_init(void); + +int omap_hwmod_enable(struct omap_hwmod *oh); +int omap_hwmod_idle(struct omap_hwmod *oh); +int omap_hwmod_shutdown(struct omap_hwmod *oh); + +int omap_hwmod_enable_clocks(struct omap_hwmod *oh); +int omap_hwmod_disable_clocks(struct omap_hwmod *oh); + +int omap_hwmod_reset(struct omap_hwmod *oh); +void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); + +void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs); +u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs); + +int omap_hwmod_count_resources(struct omap_hwmod *oh); +int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); + +struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); + +int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh); +int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh); + +int omap_hwmod_set_clockact_both(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_main(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_none(struct omap_hwmod *oh); + +int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); +int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); + +#endif diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h new file mode 100644 index 000000000000..bfef7ab95f17 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omapfb.h @@ -0,0 +1,398 @@ +/* + * File: arch/arm/plat-omap/include/mach/omapfb.h + * + * Framebuffer driver for TI OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAPFB_H +#define __OMAPFB_H + +#include +#include + +/* IOCTL commands. */ + +#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +#define OMAP_IO(num) _IO('O', num) + +#define OMAPFB_MIRROR OMAP_IOW(31, int) +#define OMAPFB_SYNC_GFX OMAP_IO(37) +#define OMAPFB_VSYNC OMAP_IO(38) +#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) +#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) +#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) +#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) +#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) +#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) +#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) +#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) +#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) +#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) +#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) + +#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +#define OMAPFB_CAPS_PANEL_MASK 0xff000000 + +#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +#define OMAPFB_CAPS_TEARSYNC 0x00002000 +#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 +#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 +#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 +#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 +#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 +#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 + +/* Values from DSP must map to lower 16-bits */ +#define OMAPFB_FORMAT_MASK 0x00ff +#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 +#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 +#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 +#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 +#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 + +#define OMAPFB_EVENT_READY 1 +#define OMAPFB_EVENT_DISABLED 2 + +#define OMAPFB_MEMTYPE_SDRAM 0 +#define OMAPFB_MEMTYPE_SRAM 1 +#define OMAPFB_MEMTYPE_MAX 1 + +enum omapfb_color_format { + OMAPFB_COLOR_RGB565 = 0, + OMAPFB_COLOR_YUV422, + OMAPFB_COLOR_YUV420, + OMAPFB_COLOR_CLUT_8BPP, + OMAPFB_COLOR_CLUT_4BPP, + OMAPFB_COLOR_CLUT_2BPP, + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, +}; + +struct omapfb_update_window { + __u32 x, y; + __u32 width, height; + __u32 format; + __u32 out_x, out_y; + __u32 out_width, out_height; + __u32 reserved[8]; +}; + +struct omapfb_update_window_old { + __u32 x, y; + __u32 width, height; + __u32 format; +}; + +enum omapfb_plane { + OMAPFB_PLANE_GFX = 0, + OMAPFB_PLANE_VID1, + OMAPFB_PLANE_VID2, +}; + +enum omapfb_channel_out { + OMAPFB_CHANNEL_OUT_LCD = 0, + OMAPFB_CHANNEL_OUT_DIGIT, +}; + +struct omapfb_plane_info { + __u32 pos_x; + __u32 pos_y; + __u8 enabled; + __u8 channel_out; + __u8 mirror; + __u8 reserved1; + __u32 out_width; + __u32 out_height; + __u32 reserved2[12]; +}; + +struct omapfb_mem_info { + __u32 size; + __u8 type; + __u8 reserved[3]; +}; + +struct omapfb_caps { + __u32 ctrl; + __u32 plane_color; + __u32 wnd_color; +}; + +enum omapfb_color_key_type { + OMAPFB_COLOR_KEY_DISABLED = 0, + OMAPFB_COLOR_KEY_GFX_DST, + OMAPFB_COLOR_KEY_VID_SRC, +}; + +struct omapfb_color_key { + __u8 channel_out; + __u32 background; + __u32 trans_key; + __u8 key_type; +}; + +enum omapfb_update_mode { + OMAPFB_UPDATE_DISABLED = 0, + OMAPFB_AUTO_UPDATE, + OMAPFB_MANUAL_UPDATE +}; + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +#include + +#define OMAP_LCDC_INV_VSYNC 0x0001 +#define OMAP_LCDC_INV_HSYNC 0x0002 +#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 + +#define OMAP_LCDC_SIGNAL_MASK 0x003f + +#define OMAP_LCDC_PANEL_TFT 0x0100 + +#define OMAPFB_PLANE_XRES_MIN 8 +#define OMAPFB_PLANE_YRES_MIN 8 + +#ifdef CONFIG_ARCH_OMAP1 +#define OMAPFB_PLANE_NUM 1 +#else +#define OMAPFB_PLANE_NUM 3 +#endif + +struct omapfb_device; + +struct lcd_panel { + const char *name; + int config; /* TFT/STN, signal inversion */ + int bpp; /* Pixel format in fb mem */ + int data_lines; /* Lines on LCD HW interface */ + + int x_res, y_res; + int pixel_clock; /* In kHz */ + int hsw; /* Horizontal synchronization + pulse width */ + int hfp; /* Horizontal front porch */ + int hbp; /* Horizontal back porch */ + int vsw; /* Vertical synchronization + pulse width */ + int vfp; /* Vertical front porch */ + int vbp; /* Vertical back porch */ + int acb; /* ac-bias pin frequency */ + int pcd; /* pixel clock divider. + Obsolete use pixel_clock instead */ + + int (*init) (struct lcd_panel *panel, + struct omapfb_device *fbdev); + void (*cleanup) (struct lcd_panel *panel); + int (*enable) (struct lcd_panel *panel); + void (*disable) (struct lcd_panel *panel); + unsigned long (*get_caps) (struct lcd_panel *panel); + int (*set_bklight_level)(struct lcd_panel *panel, + unsigned int level); + unsigned int (*get_bklight_level)(struct lcd_panel *panel); + unsigned int (*get_bklight_max) (struct lcd_panel *panel); + int (*run_test) (struct lcd_panel *panel, int test_num); +}; + +struct extif_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by extif->convert_timings */ + + int converted; +}; + +struct lcd_ctrl_extif { + int (*init) (struct omapfb_device *fbdev); + void (*cleanup) (void); + void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); + unsigned long (*get_max_tx_rate)(void); + int (*convert_timings) (struct extif_timings *timings); + void (*set_timings) (const struct extif_timings *timings); + void (*set_bits_per_cycle)(int bpc); + void (*write_command) (const void *buf, unsigned int len); + void (*read_data) (void *buf, unsigned int len); + void (*write_data) (const void *buf, unsigned int len); + void (*transfer_area) (int width, int height, + void (callback)(void * data), void *data); + int (*setup_tearsync) (unsigned pin_cnt, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int div); + int (*enable_tearsync) (int enable, unsigned line); + + unsigned long max_transmit_size; +}; + +struct omapfb_notifier_block { + struct notifier_block nb; + void *data; + int plane_idx; +}; + +typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, + unsigned long event, + void *fbi); + +struct omapfb_mem_region { + u32 paddr; + void __iomem *vaddr; + unsigned long size; + u8 type; /* OMAPFB_PLANE_MEM_* */ + unsigned alloc:1; /* allocated by the driver */ + unsigned map:1; /* kernel mapped by the driver */ +}; + +struct omapfb_mem_desc { + int region_cnt; + struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; +}; + +struct lcd_ctrl { + const char *name; + void *data; + + int (*init) (struct omapfb_device *fbdev, + int ext_mode, + struct omapfb_mem_desc *req_md); + void (*cleanup) (void); + void (*bind_client) (struct omapfb_notifier_block *nb); + void (*get_caps) (int plane, struct omapfb_caps *caps); + int (*set_update_mode)(enum omapfb_update_mode mode); + enum omapfb_update_mode (*get_update_mode)(void); + int (*setup_plane) (int plane, int channel_out, + unsigned long offset, + int screen_width, + int pos_x, int pos_y, int width, + int height, int color_mode); + int (*set_rotate) (int angle); + int (*setup_mem) (int plane, size_t size, + int mem_type, unsigned long *paddr); + int (*mmap) (struct fb_info *info, + struct vm_area_struct *vma); + int (*set_scale) (int plane, + int orig_width, int orig_height, + int out_width, int out_height); + int (*enable_plane) (int plane, int enable); + int (*update_window) (struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + void (*sync) (void); + void (*suspend) (void); + void (*resume) (void); + int (*run_test) (int test_num); + int (*setcolreg) (u_int regno, u16 red, u16 green, + u16 blue, u16 transp, + int update_hw_mem); + int (*set_color_key) (struct omapfb_color_key *ck); + int (*get_color_key) (struct omapfb_color_key *ck); +}; + +enum omapfb_state { + OMAPFB_DISABLED = 0, + OMAPFB_SUSPENDED= 99, + OMAPFB_ACTIVE = 100 +}; + +struct omapfb_plane_struct { + int idx; + struct omapfb_plane_info info; + enum omapfb_color_format color_mode; + struct omapfb_device *fbdev; +}; + +struct omapfb_device { + int state; + int ext_lcdc; /* Using external + LCD controller */ + struct mutex rqueue_mutex; + + int palette_size; + u32 pseudo_palette[17]; + + struct lcd_panel *panel; /* LCD panel */ + const struct lcd_ctrl *ctrl; /* LCD controller */ + const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ + struct lcd_ctrl_extif *ext_if; /* LCD ctrl external + interface */ + struct device *dev; + struct fb_var_screeninfo new_var; /* for mode changes */ + + struct omapfb_mem_desc mem_desc; + struct fb_info *fb_info[OMAPFB_PLANE_NUM]; +}; + +struct omapfb_platform_data { + struct omap_lcd_config lcd; + struct omapfb_mem_desc mem_desc; + void *ctrl_platform_data; +}; + +#ifdef CONFIG_ARCH_OMAP1 +extern struct lcd_ctrl omap1_lcd_ctrl; +#else +extern struct lcd_ctrl omap2_disp_ctrl; +#endif + +extern void omapfb_reserve_sdram(void); +extern void omapfb_register_panel(struct lcd_panel *panel); +extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +extern void omapfb_notify_clients(struct omapfb_device *fbdev, + unsigned long event); +extern int omapfb_register_client(struct omapfb_notifier_block *nb, + omapfb_notifier_callback_t callback, + void *callback_data); +extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); +extern int omapfb_update_window_async(struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + +/* in arch/arm/plat-omap/fb.c */ +extern void omapfb_set_ctrl_platform_data(void *pdata); + +#endif /* __KERNEL__ */ + +#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h new file mode 100644 index 000000000000..72f433d7d827 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-omap/include/mach/onenand.h + * + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *, int freq); + int dma_channel; + u8 flags; +}; + +#define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); + +#else + +#define board_onenand_data NULL + +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h new file mode 100644 index 000000000000..1eb4dc326979 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/param.h @@ -0,0 +1,8 @@ +/* + * arch/arm/plat-omap/include/mach/param.h + * + */ + +#ifdef CONFIG_OMAP_32K_TIMER_HZ +#define HZ CONFIG_OMAP_32K_TIMER_HZ +#endif diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h new file mode 100644 index 000000000000..3d45ee1d3cf4 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -0,0 +1,182 @@ +/* + * OMAP2/3 powerdomain control + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN +#define ASM_ARM_ARCH_OMAP_POWERDOMAIN + +#include +#include + +#include + +#include + + +/* Powerdomain basic power states */ +#define PWRDM_POWER_OFF 0x0 +#define PWRDM_POWER_RET 0x1 +#define PWRDM_POWER_INACTIVE 0x2 +#define PWRDM_POWER_ON 0x3 + +/* Powerdomain allowable state bitfields */ +#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_ON)) + +#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_RET)) + +#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) + + +/* Powerdomain flags */ +#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ + + +/* + * Number of memory banks that are power-controllable. On OMAP3430, the + * maximum is 4. + */ +#define PWRDM_MAX_MEM_BANKS 4 + +/* + * Maximum number of clockdomains that can be associated with a powerdomain. + * CORE powerdomain on OMAP3 is the worst case + */ +#define PWRDM_MAX_CLKDMS 4 + +/* XXX A completely arbitrary number. What is reasonable here? */ +#define PWRDM_TRANSITION_BAILOUT 100000 + +struct clockdomain; +struct powerdomain; + +/* Encodes dependencies between powerdomains - statically defined */ +struct pwrdm_dep { + + /* Powerdomain name */ + const char *pwrdm_name; + + /* Powerdomain pointer - resolved by the powerdomain code */ + struct powerdomain *pwrdm; + + /* Flags to mark OMAP chip restrictions, etc. */ + const struct omap_chip_id omap_chip; + +}; + +struct powerdomain { + + /* Powerdomain name */ + const char *name; + + /* the address offset from CM_BASE/PRM_BASE */ + const s16 prcm_offs; + + /* Used to represent the OMAP chip types containing this pwrdm */ + const struct omap_chip_id omap_chip; + + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + + /* Powerdomains that can be told to wake this powerdomain up */ + struct pwrdm_dep *wkdep_srcs; + + /* Powerdomains that can be told to keep this pwrdm from inactivity */ + struct pwrdm_dep *sleepdep_srcs; + + /* Possible powerdomain power states */ + const u8 pwrsts; + + /* Possible logic power states when pwrdm in RETENTION */ + const u8 pwrsts_logic_ret; + + /* Powerdomain flags */ + const u8 flags; + + /* Number of software-controllable memory banks in this powerdomain */ + const u8 banks; + + /* Possible memory bank pwrstates when pwrdm in RETENTION */ + const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS]; + + /* Possible memory bank pwrstates when pwrdm is ON */ + const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; + + /* Clockdomains in this powerdomain */ + struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; + + struct list_head node; + + int state; + unsigned state_counter[4]; + +#ifdef CONFIG_PM_DEBUG + s64 timer; + s64 state_timer[4]; +#endif +}; + + +void pwrdm_init(struct powerdomain **pwrdm_list); + +int pwrdm_register(struct powerdomain *pwrdm); +int pwrdm_unregister(struct powerdomain *pwrdm); +struct powerdomain *pwrdm_lookup(const char *name); + +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user); +int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user); + +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)); + +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); + +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); + +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); + +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); + +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); + +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); + +int pwrdm_wait_transition(struct powerdomain *pwrdm); + +int pwrdm_state_switch(struct powerdomain *pwrdm); +int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); +int pwrdm_pre_transition(void); +int pwrdm_post_transition(void); + +#endif diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h new file mode 100644 index 000000000000..cda2a70397b4 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -0,0 +1,35 @@ +/* + * arch/arm/plat-omap/include/mach/prcm.h + * + * Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H +#define __ASM_ARM_ARCH_OMAP_PRCM_H + +u32 omap_prcm_get_reset_sources(void); +void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); + +#endif + + + + + diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h new file mode 100644 index 000000000000..7b58a5f78ce4 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -0,0 +1,143 @@ +#ifndef ____ASM_ARCH_SDRC_H +#define ____ASM_ARCH_SDRC_H + +/* + * OMAP2/3 SDRC/SMS register definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Tony Lindgren + * Paul Walmsley + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_CS_CFG 0x040 +#define SDRC_SHARING 0x044 +#define SDRC_ERR_TYPE 0x04C +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MCFG_0 0x080 +#define SDRC_MR_0 0x084 +#define SDRC_EMR2_0 0x08c +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 +#define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MANUAL_0 0x0a8 +#define SDRC_MCFG_1 0x0B0 +#define SDRC_MR_1 0x0B4 +#define SDRC_EMR2_1 0x0BC +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 +#define SDRC_MANUAL_1 0x0D8 + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + + +#ifndef __ASSEMBLER__ + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); + +#ifdef CONFIG_ARCH_OMAP2 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + +#endif /* CONFIG_ARCH_OMAP2 */ + +#endif /* __ASSEMBLER__ */ + +#endif diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h new file mode 100644 index 000000000000..e249186d26e2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -0,0 +1,68 @@ +/* + * arch/arm/plat-omap/include/mach/serial.h + * + * Copyright (C) 2009 Texas Instruments + * Addded OMAP4 support- Santosh Shilimkar + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include + +#if defined(CONFIG_ARCH_OMAP1) +/* OMAP1 serial ports */ +#define OMAP_UART1_BASE 0xfffb0000 +#define OMAP_UART2_BASE 0xfffb0800 +#define OMAP_UART3_BASE 0xfffb9800 +#define OMAP_MAX_NR_PORTS 3 +#elif defined(CONFIG_ARCH_OMAP2) +/* OMAP2 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 3 +#elif defined(CONFIG_ARCH_OMAP3) +/* OMAP3 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x49020000 +#define OMAP_MAX_NR_PORTS 3 +#elif defined(CONFIG_ARCH_OMAP4) +/* OMAP4 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x48020000 +#define OMAP_UART4_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 4 +#endif + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) +#define OMAP24XX_BASE_BAUD (48000000/16) + +#define is_omap_port(pt) ({int __ret = 0; \ + if ((pt)->port.mapbase == OMAP_UART1_BASE || \ + (pt)->port.mapbase == OMAP_UART2_BASE || \ + (pt)->port.mapbase == OMAP_UART3_BASE) \ + __ret = 1; \ + __ret; \ + }) + +#ifndef __ASSEMBLER__ +extern void __init omap_serial_early_init(void); +extern void omap_serial_init(void); +extern int omap_uart_can_sleep(void); +extern void omap_uart_check_wakeup(void); +extern void omap_uart_prepare_suspend(void); +extern void omap_uart_prepare_idle(int num); +extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h new file mode 100644 index 000000000000..8974e3fc2691 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -0,0 +1,71 @@ +/* + * arch/arm/plat-omap/include/mach/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern int __init omap_sram_init(void); +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; + +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#endif diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h index ed8ec7477261..c58a4ef42a45 100644 --- a/arch/arm/plat-omap/include/plat/system.h +++ b/arch/arm/plat-omap/include/plat/system.h @@ -9,7 +9,7 @@ #include #include -#include +#include #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h new file mode 100644 index 000000000000..d2fcd789bb9a --- /dev/null +++ b/arch/arm/plat-omap/include/plat/tc.h @@ -0,0 +1,106 @@ +/* + * arch/arm/plat-omap/include/mach/tc.h + * + * OMAP Traffic Controller + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_ARCH_TC_H +#define __ASM_ARCH_TC_H + +#define TCMIF_BASE 0xfffecc00 +#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) +#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) +#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) +#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) +#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) +#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) +#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) +#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) +#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) +#define EMIFF_MRS (TCMIF_BASE + 0x24) +#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) +#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) +#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) +#define TC_ENDIANISM (TCMIF_BASE + 0x34) +#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) +#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) +#define EMIFS_ACS0 (TCMIF_BASE + 0x50) +#define EMIFS_ACS1 (TCMIF_BASE + 0x54) +#define EMIFS_ACS2 (TCMIF_BASE + 0x58) +#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) +#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) + +/* external EMIFS chipselect regions */ +#define OMAP_CS0_PHYS 0x00000000 +#define OMAP_CS0_SIZE SZ_64M + +#define OMAP_CS1_PHYS 0x04000000 +#define OMAP_CS1_SIZE SZ_64M + +#define OMAP_CS1A_PHYS OMAP_CS1_PHYS +#define OMAP_CS1A_SIZE SZ_32M + +#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) +#define OMAP_CS1B_SIZE SZ_32M + +#define OMAP_CS2_PHYS 0x08000000 +#define OMAP_CS2_SIZE SZ_64M + +#define OMAP_CS2A_PHYS OMAP_CS2_PHYS +#define OMAP_CS2A_SIZE SZ_32M + +#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) +#define OMAP_CS2B_SIZE SZ_32M + +#define OMAP_CS3_PHYS 0x0c000000 +#define OMAP_CS3_SIZE SZ_64M + +#ifndef __ASSEMBLER__ + +/* EMIF Slow Interface Configuration Register */ +#define OMAP_EMIFS_CONFIG_FR (1 << 4) +#define OMAP_EMIFS_CONFIG_PDE (1 << 3) +#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) +#define OMAP_EMIFS_CONFIG_BM (1 << 1) +#define OMAP_EMIFS_CONFIG_WP (1 << 0) + +#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/plat/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h new file mode 100644 index 000000000000..c88d346b59d9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ddf7b88dec4d..e22f57564b59 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -19,7 +19,7 @@ #include #include -#include +#include unsigned int system_rev; diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h new file mode 100644 index 000000000000..33e72ca125d7 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -0,0 +1,145 @@ +// include/asm-arm/mach-omap/usb.h + +#ifndef __ASM_ARCH_OMAP_USB_H +#define __ASM_ARCH_OMAP_USB_H + +#include + +/*-------------------------------------------------------------------------*/ + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 +#define OMAP1_OHCI_BASE 0xfffba000 + +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 + +#ifdef CONFIG_ARCH_OMAP1 + +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE + +#else + +#define OTG_BASE OMAP2_OTG_BASE +#define UDC_BASE OMAP2_UDC_BASE +#define OMAP_OHCI_BASE OMAP2_OHCI_BASE + +extern void usb_musb_init(void); + +#endif + +void omap_usb_init(struct omap_usb_config *pdata); + +/*-------------------------------------------------------------------------*/ + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) + +/* OMAP2 */ +# define USB_UNIDIR 0x0 +# define USB_UNIDIR_TLL 0x1 +# define USB_BIDIR 0x2 +# define USB_BIDIR_TLL 0x3 +# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) +# define USBT2TLL5PI (1 << 17) +# define USB0PUENACTLOI (1 << 16) +# define USBSTANDBYCTRL (1 << 15) + +#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 93c1d53eb918..11f5d7961c73 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,12 +13,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c index c799b3b0d709..afd1c27cff7c 100644 --- a/arch/arm/plat-omap/iommu-debug.c +++ b/arch/arm/plat-omap/iommu-debug.c @@ -17,8 +17,8 @@ #include #include -#include -#include +#include +#include #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b6012707307..aa84729a0dff 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -20,7 +20,7 @@ #include -#include +#include #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index dc3fac3dd0ea..0ce36bbef9d2 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -18,8 +18,8 @@ #include #include -#include -#include +#include +#include #include "iopgtable.h" diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 40424edae939..734bff332c82 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -26,7 +26,7 @@ #include #include -#include +#include static int enable_seq_bit; module_param(enable_seq_bit, bool, 0); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e664b912d7bb..92770334d728 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include struct omap_mcbsp **mcbsp_ptr; int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 8d329fb20740..05aebcad215b 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index e98f0a2a6c26..186bca82cfab 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -22,9 +22,9 @@ #include /* Interface documentation is in mach/omap-pm.h */ -#include +#include -#include +#include struct omap_opp *dsp_opps; struct omap_opp *mpu_opps; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 12513f493daf..bb16e624a557 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -82,8 +82,8 @@ #include #include -#include -#include +#include +#include /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4144f81de19e..a53aa8541730 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -25,11 +25,11 @@ #include -#include -#include -#include +#include +#include +#include -#include +#include #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/prm.h" diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 3c40b8525df6..0ea1e0beb455 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -33,10 +33,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #ifdef CONFIG_ARCH_OMAP1 diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index bba85add35a3..1a494d505431 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -35,12 +35,12 @@ #include #include #include -#include -#include +#include +#include #include #include #include -#include +#include #undef NEW_BOARD_LEARNING_MODE diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c index 446050759b4d..b9826032450b 100644 --- a/drivers/leds/leds-ams-delta.c +++ b/drivers/leds/leds-ams-delta.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include /* * Our context diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c index 4b364bae6b3e..970afa103261 100644 --- a/drivers/mfd/menelaus.c +++ b/drivers/mfd/menelaus.c @@ -44,7 +44,7 @@ #include #include -#include +#include #define DRIVER_NAME "menelaus" diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e832e975da60..efa00ea97725 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -39,7 +39,7 @@ #include #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -#include +#include #endif /* diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index e7a331de5733..5d773b89af7c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -30,12 +30,12 @@ #include #include -#include -#include +#include +#include #include -#include -#include -#include +#include +#include +#include #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x04 diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4487cc097911..c8f3e0245f1d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -30,11 +30,11 @@ #include #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include /* OMAP HSMMC Host Controller Registers */ #define OMAP_HSMMC_SYSCONFIG 0x0010 diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index a24478102b11..ead0b2fab670 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -45,7 +45,7 @@ #include #include #include -#include +#include #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL }; diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 005b91f096f2..2548e1065bf8 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include /* * MTD structure for E3 (Delta) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 090ab87086b5..1bb799f0125c 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -18,9 +18,9 @@ #include #include -#include -#include -#include +#include +#include +#include #define GPMC_IRQ_STATUS 0x18 #define GPMC_ECC_CONFIG 0x1F4 diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 0108ed42e877..86c4f6dcdc65 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -36,13 +36,13 @@ #include #include -#include -#include +#include +#include #include -#include +#include -#include +#include #define DRIVER_NAME "omap2-onenand" diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 68570bc3ac86..663781d20129 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -23,8 +23,8 @@ #include #include -#include -#include +#include +#include /* NOTE: don't expect this to support many I/O cards. The 16xx chips have diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index ba1a872b221e..bf5f95a19413 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -35,8 +35,8 @@ #include -#include -#include +#include +#include #define OMAP2_MCSPI_MAX_FREQ 48000000 diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 7bcf409792c7..6c3a8557db27 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -51,8 +51,8 @@ #include #include -#include -#include /* OMAP7XX_IO_CONF registers */ +#include +#include /* OMAP7XX_IO_CONF registers */ /* FIXME address is now a platform device resource, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index a2db0e174f2c..b836efe9ea71 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -52,9 +52,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "omap_udc.h" diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 83cbecd2a1ed..5645f70b9214 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -24,10 +24,10 @@ #include #include -#include +#include #include -#include -#include +#include +#include /* OMAP-1510 OHCI has its own MMU for DMA */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 34875201ee04..6761d2088db8 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include "musb_core.h" #include "omap2430.h" diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index dc7670718cd2..fbede7798aed 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -12,7 +12,7 @@ #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) #include -#include +#include /* * OMAP2430-specific definitions diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 7e073a0d7ac9..e13c77052e5e 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include #include #include -#include -#include +#include +#include #include "musb_core.h" diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 77a5f4188999..d54460a88173 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -36,8 +36,8 @@ #include #include -#include -#include +#include +#include #ifndef DEBUG diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index cbad67e89826..8693e5fcd2eb 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -26,8 +26,8 @@ #include #include -#include -#include +#include +#include #define OMAPBL_MAX_INTENSITY 0xff diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c index 70dadf9d2334..f5d75f22cef9 100644 --- a/drivers/video/omap/blizzard.c +++ b/drivers/video/omap/blizzard.c @@ -26,9 +26,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "dispc.h" diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 6f957ceee084..7c833db4f9b7 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -25,9 +25,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "dispc.h" diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c index ca51583ec98a..17a975e4c9c9 100644 --- a/drivers/video/omap/hwa742.c +++ b/drivers/video/omap/hwa742.c @@ -26,9 +26,9 @@ #include #include -#include -#include -#include +#include +#include +#include #define HWA742_REV_CODE_REG 0x0 #define HWA742_CONFIG_REG 0x2 diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index 393712b6f369..fea7feee0b77 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c @@ -27,8 +27,8 @@ #include #include -#include -#include +#include +#include #include #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 1f7439955e02..3d5277252ca3 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -25,9 +25,9 @@ #include #include -#include +#include #include -#include +#include #define AMS_DELTA_DEFAULT_CONTRAST 112 diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c index 626ae3a532ff..4c5cefc5153b 100644 --- a/drivers/video/omap/lcd_apollon.c +++ b/drivers/video/omap/lcd_apollon.c @@ -25,8 +25,8 @@ #include #include -#include -#include +#include +#include /* #define USE_35INCH_LCD 1 */ diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index 417ae5efa8bb..240b4fb10741 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c @@ -24,7 +24,7 @@ #include #include -#include +#include #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c index 0c398bda7601..720625da1f4e 100644 --- a/drivers/video/omap/lcd_h4.c +++ b/drivers/video/omap/lcd_h4.c @@ -22,7 +22,7 @@ #include #include -#include +#include static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c index cdbd8bb607be..aafe9b497e2d 100644 --- a/drivers/video/omap/lcd_inn1510.c +++ b/drivers/video/omap/lcd_inn1510.c @@ -23,8 +23,8 @@ #include #include -#include -#include +#include +#include static int innovator1510_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index 268f7f808a4e..0de338264a8a 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c @@ -23,7 +23,7 @@ #include #include -#include +#include #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index dbfe8974fb94..6a260dfdadc5 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c @@ -27,8 +27,8 @@ #include #include -#include -#include +#include +#include #include #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index 918ee8934196..2162eb09e0fe 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c @@ -23,8 +23,8 @@ #include #include -#include -#include +#include +#include #define MIPID_MODULE_NAME "lcd_mipid" diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index 7a2bbe2ecec3..e1a38abca3e7 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c @@ -26,8 +26,8 @@ #include #include -#include -#include +#include +#include #include #define LCD_PANEL_ENABLE_GPIO 154 diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index 4011910123bf..ccec084ed647 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c @@ -25,8 +25,8 @@ #include #include -#include -#include +#include +#include #include #define LCD_PANEL_ENABLE_GPIO 170 diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index b6a4c2c57a2f..556eb31db24c 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -25,8 +25,8 @@ #include #include -#include -#include +#include +#include #include #define LCD_PANEL_ENABLE_GPIO 153 diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index b3fa88bc6269..bb21d7dca39e 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index 2bc5c9268e5e..b0f86e514cde 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include #include #define LCD_ENABLE 144 diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c index 4bf3c79f3cc7..d30289603ce8 100644 --- a/drivers/video/omap/lcd_palmte.c +++ b/drivers/video/omap/lcd_palmte.c @@ -23,8 +23,8 @@ #include #include -#include -#include +#include +#include static int palmte_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c index 48ea1f9f2cbf..557424fb6df1 100644 --- a/drivers/video/omap/lcd_palmtt.c +++ b/drivers/video/omap/lcd_palmtt.c @@ -30,7 +30,7 @@ GPIO13 - screen blanking #include #include -#include +#include static int palmtt_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c index 0697d29b4d3b..5f4b5b2c1f41 100644 --- a/drivers/video/omap/lcd_palmz71.c +++ b/drivers/video/omap/lcd_palmz71.c @@ -24,7 +24,7 @@ #include #include -#include +#include static int palmz71_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index ab3949256677..5f32cafbf74c 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -29,8 +29,8 @@ #include #include -#include -#include +#include +#include #include diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 0d0c8c8b9b56..f900a43db8d7 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -28,8 +28,8 @@ #include #include -#include -#include +#include +#include #include "lcdc.h" #include "dispc.h" diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index ee01e84e19c1..c90fa39486b4 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include "dispc.h" diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index a76946220249..79dc84f09713 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include #include "lcdc.h" diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 3ed571a2ab18..429ea99eaee5 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include "omap_wdt.h" diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 5a5166ac7279..3f1a6c1a0355 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -31,8 +31,8 @@ #include -#include -#include +#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 0a505938e42b..08e09d72790f 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 3341f49402ca..e8e63ba40877 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -31,9 +31,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5735945788bf..1169d2ec2e24 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include "omap-pcm.h" static const struct snd_pcm_hardware omap_pcm_hardware = { diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c index 027e1a40f8a1..c7adea38274c 100644 --- a/sound/soc/omap/omap2evm.c +++ b/sound/soc/omap/omap2evm.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c index b0cff9f33b7e..d88ad5ca526c 100644 --- a/sound/soc/omap/omap3beagle.c +++ b/sound/soc/omap/omap3beagle.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c index 9114c263077b..41a91b5cf12b 100644 --- a/sound/soc/omap/omap3evm.c +++ b/sound/soc/omap/omap3evm.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index a4e149b7f0eb..498ca2e03519 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c index ec4f8fd8b3a2..624f40ecc472 100644 --- a/sound/soc/omap/overo.c +++ b/sound/soc/omap/overo.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 4a3f62d1f295..c071f9603a38 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index f90b45f56220..f90a2ac888cf 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "omap-mcbsp.h" #include "omap-pcm.h" -- cgit v1.2.3-58-ga151 From a2d3e7bad82dcfb67924849e2063238a1ae51b6e Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:47:33 +0530 Subject: OMAP3: PM: GPMC context save/restore This patch adds the context save and restore functions for GPMC to enable off-mode. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/gpmc.c | 98 ++++++++++++++++++++++++++++++++-- arch/arm/plat-omap/include/plat/gpmc.h | 3 ++ 2 files changed, 98 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 004da696ace7..7d687845f391 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -62,6 +62,33 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +/* Structure to save gpmc cs context */ +struct gpmc_cs_config { + u32 config1; + u32 config2; + u32 config3; + u32 config4; + u32 config5; + u32 config6; + u32 config7; + int is_valid; +}; + +/* + * Structure to save/restore gpmc context + * to support core off on OMAP3 + */ +struct omap3_gpmc_regs { + u32 sysconfig; + u32 irqenable; + u32 timeout_ctrl; + u32 config; + u32 prefetch_config1; + u32 prefetch_config2; + u32 prefetch_control; + struct gpmc_cs_config cs_context[GPMC_CS_NUM]; +}; + static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); @@ -261,7 +288,7 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; l &= ~(0x0f << 8); l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; - l |= 1 << 6; /* CSVALID */ + l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); } @@ -270,7 +297,7 @@ static void gpmc_cs_disable_mem(int cs) u32 l; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - l &= ~(1 << 6); /* CSVALID */ + l &= ~GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); } @@ -290,7 +317,7 @@ static int gpmc_cs_mem_enabled(int cs) u32 l; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - return l & (1 << 6); + return l & GPMC_CONFIG7_CSVALID; } int gpmc_cs_set_reserved(int cs, int reserved) @@ -516,3 +543,68 @@ void __init gpmc_init(void) gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); } + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap3_gpmc_regs gpmc_context; + +void omap3_gpmc_save_context() +{ + int i; + gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG); + gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE); + gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL); + gpmc_context.config = gpmc_read_reg(GPMC_CONFIG); + gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); + gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); + gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); + for (i = 0; i < GPMC_CS_NUM; i++) { + gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); + if (gpmc_context.cs_context[i].is_valid) { + gpmc_context.cs_context[i].config1 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG1); + gpmc_context.cs_context[i].config2 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG2); + gpmc_context.cs_context[i].config3 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG3); + gpmc_context.cs_context[i].config4 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG4); + gpmc_context.cs_context[i].config5 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG5); + gpmc_context.cs_context[i].config6 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG6); + gpmc_context.cs_context[i].config7 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG7); + } + } +} + +void omap3_gpmc_restore_context() +{ + int i; + gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig); + gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable); + gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl); + gpmc_write_reg(GPMC_CONFIG, gpmc_context.config); + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); + gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); + gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); + for (i = 0; i < GPMC_CS_NUM; i++) { + if (gpmc_context.cs_context[i].is_valid) { + gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, + gpmc_context.cs_context[i].config1); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG2, + gpmc_context.cs_context[i].config2); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG3, + gpmc_context.cs_context[i].config3); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG4, + gpmc_context.cs_context[i].config4); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG5, + gpmc_context.cs_context[i].config5); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG6, + gpmc_context.cs_context[i].config6); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG7, + gpmc_context.cs_context[i].config7); + } + } +} +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 9c99cda77ba6..696e0ca051b7 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -52,6 +52,7 @@ #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) #define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) +#define GPMC_CONFIG7_CSVALID (1 << 6) /* * Note that all values in this struct are in nanoseconds, while @@ -107,6 +108,8 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write); extern void gpmc_prefetch_reset(void); extern int gpmc_prefetch_status(void); +extern void omap3_gpmc_save_context(void); +extern void omap3_gpmc_restore_context(void); extern void __init gpmc_init(void); #endif -- cgit v1.2.3-58-ga151 From 40c670f0314c3c9463ce9c2f2b9b1085884837f6 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:47:48 +0530 Subject: OMAP3: PM: GPIO context save/restore Add context save and restore to enable off-mode. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/gpio.c | 92 ++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/gpio.h | 3 +- 2 files changed, 94 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 35a59ce5a2b4..b71052c6581b 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -290,6 +290,23 @@ static struct gpio_bank gpio_bank_34xx[6] = { METHOD_GPIO_24XX }, }; +struct omap3_gpio_regs { + u32 sysconfig; + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 setwkuena; + u32 setdataout; +}; + +static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; #endif #ifdef CONFIG_ARCH_OMAP4 @@ -2036,6 +2053,81 @@ void omap2_gpio_resume_after_retention(void) #endif +#ifdef CONFIG_ARCH_OMAP34XX +/* save the registers of bank 2-6 */ +void omap_gpio_save_context(void) +{ + int i; + + /* saving banks from 2-6 only since GPIO1 is in WKUP */ + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + gpio_context[i].sysconfig = + __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG); + gpio_context[i].irqenable1 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); + gpio_context[i].irqenable2 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); + gpio_context[i].wake_en = + __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); + gpio_context[i].ctrl = + __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + gpio_context[i].oe = + __raw_readl(bank->base + OMAP24XX_GPIO_OE); + gpio_context[i].leveldetect0 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); + gpio_context[i].leveldetect1 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + gpio_context[i].risingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); + gpio_context[i].fallingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); + gpio_context[i].dataout = + __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + gpio_context[i].setwkuena = + __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA); + gpio_context[i].setdataout = + __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} + +/* restore the required registers of bank 2-6 */ +void omap_gpio_restore_context(void) +{ + int i; + + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + __raw_writel(gpio_context[i].sysconfig, + bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(gpio_context[i].irqenable1, + bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(gpio_context[i].irqenable2, + bank->base + OMAP24XX_GPIO_IRQENABLE2); + __raw_writel(gpio_context[i].wake_en, + bank->base + OMAP24XX_GPIO_WAKE_EN); + __raw_writel(gpio_context[i].ctrl, + bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(gpio_context[i].oe, + bank->base + OMAP24XX_GPIO_OE); + __raw_writel(gpio_context[i].leveldetect0, + bank->base + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(gpio_context[i].leveldetect1, + bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(gpio_context[i].risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + __raw_writel(gpio_context[i].fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(gpio_context[i].dataout, + bank->base + OMAP24XX_GPIO_DATAOUT); + __raw_writel(gpio_context[i].setwkuena, + bank->base + OMAP24XX_GPIO_SETWKUENA); + __raw_writel(gpio_context[i].setdataout, + bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} +#endif + /* * This may get called early from board specific init * for boards that have interrupts routed via FPGA. diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 633ff688b928..de7c54731cbe 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -76,7 +76,8 @@ extern void omap2_gpio_prepare_for_retention(void); extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); - +extern void omap_gpio_save_context(void); +extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ /* Wrappers for "new style" GPIO calls, using the new infrastructure -- cgit v1.2.3-58-ga151 From 0addd61bc2028842bdcbd92c622d1110fc29c5a3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:48:20 +0530 Subject: OMAP3: PM: INTC context save/restore Add context save and restore for the INTC module to support off-mode. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/irq.c | 66 ++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/irqs.h | 5 +++ 2 files changed, 71 insertions(+) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 1db121f437d2..ebd3538bd1d4 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -25,6 +25,10 @@ #define INTC_SYSSTATUS 0x0014 #define INTC_SIR 0x0040 #define INTC_CONTROL 0x0048 +#define INTC_PROTECTION 0x004C +#define INTC_IDLE 0x0050 +#define INTC_THRESHOLD 0x0068 +#define INTC_MIR0 0x0084 #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 @@ -48,6 +52,18 @@ static struct omap_irq_bank { }, }; +/* Structure to save interrupt controller context */ +struct omap3_intc_regs { + u32 sysconfig; + u32 protection; + u32 idle; + u32 threshold; + u32 ilr[INTCPS_NR_IRQS]; + u32 mir[INTCPS_NR_MIR_REGS]; +}; + +static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; + /* INTC bank register get/set */ static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) @@ -209,3 +225,53 @@ void __init omap_init_irq(void) } } +#ifdef CONFIG_ARCH_OMAP3 +void omap_intc_save_context(void) +{ + int ind = 0, i = 0; + for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { + struct omap_irq_bank *bank = irq_banks + ind; + intc_context[ind].sysconfig = + intc_bank_read_reg(bank, INTC_SYSCONFIG); + intc_context[ind].protection = + intc_bank_read_reg(bank, INTC_PROTECTION); + intc_context[ind].idle = + intc_bank_read_reg(bank, INTC_IDLE); + intc_context[ind].threshold = + intc_bank_read_reg(bank, INTC_THRESHOLD); + for (i = 0; i < INTCPS_NR_IRQS; i++) + intc_context[ind].ilr[i] = + intc_bank_read_reg(bank, (0x100 + 0x4*ind)); + for (i = 0; i < INTCPS_NR_MIR_REGS; i++) + intc_context[ind].mir[i] = + intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + + (0x20 * i)); + } +} + +void omap_intc_restore_context(void) +{ + int ind = 0, i = 0; + + for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { + struct omap_irq_bank *bank = irq_banks + ind; + intc_bank_write_reg(intc_context[ind].sysconfig, + bank, INTC_SYSCONFIG); + intc_bank_write_reg(intc_context[ind].sysconfig, + bank, INTC_SYSCONFIG); + intc_bank_write_reg(intc_context[ind].protection, + bank, INTC_PROTECTION); + intc_bank_write_reg(intc_context[ind].idle, + bank, INTC_IDLE); + intc_bank_write_reg(intc_context[ind].threshold, + bank, INTC_THRESHOLD); + for (i = 0; i < INTCPS_NR_IRQS; i++) + intc_bank_write_reg(intc_context[ind].ilr[i], + bank, (0x100 + 0x4*ind)); + for (i = 0; i < INTCPS_NR_MIR_REGS; i++) + intc_bank_write_reg(intc_context[ind].mir[i], + &irq_banks[0], INTC_MIR0 + (0x20 * i)); + } + /* MIRs are saved and restore with other PRCM registers */ +} +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 6a6d0281e1d5..ce5dd2d1dc21 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -477,9 +477,14 @@ #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) +#define INTCPS_NR_MIR_REGS 3 +#define INTCPS_NR_IRQS 96 + #ifndef __ASSEMBLY__ extern void omap_init_irq(void); extern int omap_irq_pending(void); +void omap_intc_save_context(void); +void omap_intc_restore_context(void); #endif #include -- cgit v1.2.3-58-ga151 From c171a2586161c623253186c394ca456947ec6a66 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:48:31 +0530 Subject: OMAP3: PM: PRCM context save/restore Add context save and restore for PRCM module to support off-mode. Additional registers (CM_CLKSEL4, CM_CLKEN, CM_CLKEN2) added by Tero Kristo. Missing CM_CLKEN_PLL_IVA2 register added by Kalle Jokiniemi. Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prcm.c | 389 ++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/control.h | 2 + arch/arm/plat-omap/include/plat/prcm.h | 6 +- 3 files changed, 396 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index b0d3ad05be2e..56f77df1ffac 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -7,6 +7,9 @@ * * Written by Tony Lindgren * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak + * * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. * * This program is free software; you can redistribute it and/or modify @@ -21,8 +24,11 @@ #include #include +#include +#include #include "clock.h" +#include "cm.h" #include "prm.h" #include "prm-regbits-24xx.h" @@ -31,6 +37,88 @@ static void __iomem *cm_base; #define MAX_MODULE_ENABLE_WAIT 100000 +struct omap3_prcm_regs { + u32 control_padconf_sys_nirq; + u32 iva2_cm_clksel2; + u32 cm_sysconfig; + u32 sgx_cm_clksel; + u32 wkup_cm_clksel; + u32 dss_cm_clksel; + u32 cam_cm_clksel; + u32 per_cm_clksel; + u32 emu_cm_clksel; + u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle2; + u32 pll_cm_clksel4; + u32 pll_cm_clksel5; + u32 pll_cm_clken; + u32 pll_cm_clken2; + u32 cm_polctrl; + u32 iva2_cm_fclken; + u32 iva2_cm_clken_pll; + u32 core_cm_fclken1; + u32 core_cm_fclken3; + u32 sgx_cm_fclken; + u32 wkup_cm_fclken; + u32 dss_cm_fclken; + u32 cam_cm_fclken; + u32 per_cm_fclken; + u32 usbhost_cm_fclken; + u32 core_cm_iclken1; + u32 core_cm_iclken2; + u32 core_cm_iclken3; + u32 sgx_cm_iclken; + u32 wkup_cm_iclken; + u32 dss_cm_iclken; + u32 cam_cm_iclken; + u32 per_cm_iclken; + u32 usbhost_cm_iclken; + u32 iva2_cm_autiidle2; + u32 mpu_cm_autoidle2; + u32 pll_cm_autoidle; + u32 iva2_cm_clkstctrl; + u32 mpu_cm_clkstctrl; + u32 core_cm_clkstctrl; + u32 sgx_cm_clkstctrl; + u32 dss_cm_clkstctrl; + u32 cam_cm_clkstctrl; + u32 per_cm_clkstctrl; + u32 neon_cm_clkstctrl; + u32 usbhost_cm_clkstctrl; + u32 core_cm_autoidle1; + u32 core_cm_autoidle2; + u32 core_cm_autoidle3; + u32 wkup_cm_autoidle; + u32 dss_cm_autoidle; + u32 cam_cm_autoidle; + u32 per_cm_autoidle; + u32 usbhost_cm_autoidle; + u32 sgx_cm_sleepdep; + u32 dss_cm_sleepdep; + u32 cam_cm_sleepdep; + u32 per_cm_sleepdep; + u32 usbhost_cm_sleepdep; + u32 cm_clkout_ctrl; + u32 prm_clkout_ctrl; + u32 sgx_pm_wkdep; + u32 dss_pm_wkdep; + u32 cam_pm_wkdep; + u32 per_pm_wkdep; + u32 neon_pm_wkdep; + u32 usbhost_pm_wkdep; + u32 core_pm_mpugrpsel1; + u32 iva2_pm_ivagrpsel1; + u32 core_pm_mpugrpsel3; + u32 core_pm_ivagrpsel3; + u32 wkup_pm_mpugrpsel; + u32 wkup_pm_ivagrpsel; + u32 per_pm_mpugrpsel; + u32 per_pm_ivagrpsel; + u32 wkup_pm_wken; +}; + +struct omap3_prcm_regs prcm_context; + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -168,3 +256,304 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) prm_base = omap2_globals->prm; cm_base = omap2_globals->cm; } + +#ifdef CONFIG_ARCH_OMAP3 +void omap3_prcm_save_context(void) +{ + prcm_context.control_padconf_sys_nirq = + omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ); + prcm_context.iva2_cm_clksel2 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); + prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); + prcm_context.sgx_cm_clksel = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); + prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + prcm_context.dss_cm_clksel = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL); + prcm_context.cam_cm_clksel = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL); + prcm_context.per_cm_clksel = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL); + prcm_context.emu_cm_clksel = + cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); + prcm_context.emu_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL); + prcm_context.pll_cm_autoidle2 = + cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); + prcm_context.pll_cm_clksel4 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4); + prcm_context.pll_cm_clksel5 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); + prcm_context.pll_cm_clken = + cm_read_mod_reg(PLL_MOD, CM_CLKEN); + prcm_context.pll_cm_clken2 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); + prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); + prcm_context.iva2_cm_fclken = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN); + prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKEN_PLL); + prcm_context.core_cm_fclken1 = + cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + prcm_context.core_cm_fclken3 = + cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prcm_context.sgx_cm_fclken = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN); + prcm_context.wkup_cm_fclken = + cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + prcm_context.dss_cm_fclken = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN); + prcm_context.cam_cm_fclken = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN); + prcm_context.per_cm_fclken = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + prcm_context.usbhost_cm_fclken = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN); + prcm_context.core_cm_iclken1 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + prcm_context.core_cm_iclken2 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN2); + prcm_context.core_cm_iclken3 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + prcm_context.sgx_cm_iclken = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN); + prcm_context.wkup_cm_iclken = + cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + prcm_context.dss_cm_iclken = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN); + prcm_context.cam_cm_iclken = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN); + prcm_context.per_cm_iclken = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + prcm_context.usbhost_cm_iclken = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN); + prcm_context.iva2_cm_autiidle2 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + prcm_context.mpu_cm_autoidle2 = + cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2); + prcm_context.pll_cm_autoidle = + cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + prcm_context.iva2_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL); + prcm_context.mpu_cm_clkstctrl = + cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL); + prcm_context.core_cm_clkstctrl = + cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL); + prcm_context.sgx_cm_clkstctrl = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL); + prcm_context.dss_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL); + prcm_context.cam_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL); + prcm_context.per_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL); + prcm_context.neon_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL); + prcm_context.usbhost_cm_clkstctrl = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL); + prcm_context.core_cm_autoidle1 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1); + prcm_context.core_cm_autoidle2 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2); + prcm_context.core_cm_autoidle3 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3); + prcm_context.wkup_cm_autoidle = + cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE); + prcm_context.dss_cm_autoidle = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE); + prcm_context.cam_cm_autoidle = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE); + prcm_context.per_cm_autoidle = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); + prcm_context.usbhost_cm_autoidle = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); + prcm_context.sgx_cm_sleepdep = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.dss_cm_sleepdep = + cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.cam_cm_sleepdep = + cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.per_cm_sleepdep = + cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.usbhost_cm_sleepdep = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_CM_CLKOUT_CTRL_OFFSET); + prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_PRM_CLKOUT_CTRL_OFFSET); + prcm_context.sgx_pm_wkdep = + prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP); + prcm_context.dss_pm_wkdep = + prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP); + prcm_context.cam_pm_wkdep = + prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP); + prcm_context.per_pm_wkdep = + prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP); + prcm_context.neon_pm_wkdep = + prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP); + prcm_context.usbhost_pm_wkdep = + prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + prcm_context.core_pm_mpugrpsel1 = + prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1); + prcm_context.iva2_pm_ivagrpsel1 = + prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1); + prcm_context.core_pm_mpugrpsel3 = + prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3); + prcm_context.core_pm_ivagrpsel3 = + prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prcm_context.wkup_pm_mpugrpsel = + prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + prcm_context.wkup_pm_ivagrpsel = + prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prcm_context.per_pm_mpugrpsel = + prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + prcm_context.per_pm_ivagrpsel = + prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + return; +} + +void omap3_prcm_restore_context(void) +{ + omap_ctrl_writel(prcm_context.control_padconf_sys_nirq, + OMAP343X_CONTROL_PADCONF_SYSNIRQ); + cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, + CM_CLKSEL2); + __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); + cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL); + cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD, + CM_CLKSEL1); + cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD, + OMAP3430ES2_CM_CLKSEL4); + cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD, + OMAP3430ES2_CM_CLKSEL5); + cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN); + cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD, + OMAP3430ES2_CM_CLKEN2); + __raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL); + cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKEN_PLL); + cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1); + cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN); + cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.usbhost_cm_fclken, + OMAP3430ES2_USBHOST_MOD, CM_FCLKEN); + cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2); + cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.usbhost_cm_iclken, + OMAP3430ES2_USBHOST_MOD, CM_ICLKEN); + cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl, + OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD, + CM_AUTOIDLE1); + cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD, + CM_AUTOIDLE3); + cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.usbhost_cm_autoidle, + OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep, + OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD, + OMAP3_CM_CLKOUT_CTRL_OFFSET); + prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD, + OMAP3_PRM_CLKOUT_CTRL_OFFSET); + prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.usbhost_pm_wkdep, + OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD, + OMAP3430_PM_MPUGRPSEL1); + prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD, + OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD, + OMAP3430ES2_PM_MPUGRPSEL3); + prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD, + OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD, + OMAP3430_PM_MPUGRPSEL); + prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD, + OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD, + OMAP3430_PM_MPUGRPSEL); + prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN); + return; +} +#endif diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 805819f3a868..835f5b7aa4b6 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -112,6 +112,8 @@ #define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) #define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0) + /* 34xx-only CONTROL_GENERAL register offsets */ #define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) #define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index cda2a70397b4..e63e94e18975 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -27,9 +27,13 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); -#endif +#define START_PADCONF_SAVE 0x2 +#define PADCONF_SAVE_DONE 0x1 +void omap3_prcm_save_context(void); +void omap3_prcm_restore_context(void); +#endif -- cgit v1.2.3-58-ga151 From 8014078684377257e3a83ac45db95711929850c5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:48:46 +0530 Subject: OMAP3: PM: Populate scratchpad contents This patch populates the scratchpad contents as expected by the bootROM code. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 203 ++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/control.h | 10 ++ 2 files changed, 213 insertions(+) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 6adb360c6d45..03e1bce3b3bb 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -17,9 +17,81 @@ #include #include +#include +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "prm.h" +#include "sdrc.h" static void __iomem *omap2_ctrl_base; +struct omap3_scratchpad { + u32 boot_config_ptr; + u32 public_restore_ptr; + u32 secure_ram_restore_ptr; + u32 sdrc_module_semaphore; + u32 prcm_block_offset; + u32 sdrc_block_offset; +}; + +struct omap3_scratchpad_prcm_block { + u32 prm_clksrc_ctrl; + u32 prm_clksel; + u32 cm_clksel_core; + u32 cm_clksel_wkup; + u32 cm_clken_pll; + u32 cm_autoidle_pll; + u32 cm_clksel1_pll; + u32 cm_clksel2_pll; + u32 cm_clksel3_pll; + u32 cm_clken_pll_mpu; + u32 cm_autoidle_pll_mpu; + u32 cm_clksel1_pll_mpu; + u32 cm_clksel2_pll_mpu; + u32 prcm_block_size; +}; + +struct omap3_scratchpad_sdrc_block { + u16 sysconfig; + u16 cs_cfg; + u16 sharing; + u16 err_type; + u32 dll_a_ctrl; + u32 dll_b_ctrl; + u32 power; + u32 cs_0; + u32 mcfg_0; + u16 mr_0; + u16 emr_1_0; + u16 emr_2_0; + u16 emr_3_0; + u32 actim_ctrla_0; + u32 actim_ctrlb_0; + u32 rfr_ctrl_0; + u32 cs_1; + u32 mcfg_1; + u16 mr_1; + u16 emr_1_1; + u16 emr_2_1; + u16 emr_3_1; + u32 actim_ctrla_1; + u32 actim_ctrlb_1; + u32 rfr_ctrl_1; + u16 dcdl_1_ctrl; + u16 dcdl_2_ctrl; + u32 flags; + u32 block_size; +}; + +/* + * This is used to store ARM registers in SDRAM before attempting + * an MPU OFF. The save and restore happens from the SRAM sleep code. + * The address is stored in scratchpad, so that it can be used + * during the restore path. + */ +u32 omap3_arm_context[128]; + #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) void __init omap2_set_globals_control(struct omap_globals *omap2_globals) @@ -62,3 +134,134 @@ void omap_ctrl_writel(u32 val, u16 offset) __raw_writel(val, OMAP_CTRL_REGADDR(offset)); } +#ifdef CONFIG_ARCH_OMAP3 +/* + * Clears the scratchpad contents in case of cold boot- + * called during bootup + */ +void omap3_clear_scratchpad_contents(void) +{ + u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET; + u32 *v_addr; + u32 offset = 0; + v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); + if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & + OMAP3430_GLOBAL_COLD_RST) { + for ( ; offset <= max_offset; offset += 0x4) + __raw_writel(0x0, (v_addr + offset)); + prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD, + OMAP3_PRM_RSTST_OFFSET); + } +} + +/* Populate the scratchpad structure with restore structure */ +void omap3_save_scratchpad_contents(void) +{ + void * __iomem scratchpad_address; + u32 arm_context_addr; + struct omap3_scratchpad scratchpad_contents; + struct omap3_scratchpad_prcm_block prcm_block_contents; + struct omap3_scratchpad_sdrc_block sdrc_block_contents; + + /* Populate the Scratchpad contents */ + scratchpad_contents.boot_config_ptr = 0x0; + scratchpad_contents.public_restore_ptr = + virt_to_phys(get_restore_pointer()); + scratchpad_contents.secure_ram_restore_ptr = 0x0; + scratchpad_contents.sdrc_module_semaphore = 0x0; + scratchpad_contents.prcm_block_offset = 0x2C; + scratchpad_contents.sdrc_block_offset = 0x64; + + /* Populate the PRCM block contents */ + prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_PRM_CLKSEL_OFFSET); + prcm_block_contents.cm_clksel_core = + cm_read_mod_reg(CORE_MOD, CM_CLKSEL); + prcm_block_contents.cm_clksel_wkup = + cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + prcm_block_contents.cm_clken_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKEN_PLL); + prcm_block_contents.cm_autoidle_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + prcm_block_contents.cm_clksel1_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); + prcm_block_contents.cm_clksel2_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); + prcm_block_contents.cm_clksel3_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); + prcm_block_contents.cm_clken_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); + prcm_block_contents.cm_autoidle_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); + prcm_block_contents.cm_clksel1_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); + prcm_block_contents.cm_clksel2_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + prcm_block_contents.prcm_block_size = 0x0; + + /* Populate the SDRC block contents */ + sdrc_block_contents.sysconfig = + (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF); + sdrc_block_contents.cs_cfg = + (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF); + sdrc_block_contents.sharing = + (sdrc_read_reg(SDRC_SHARING) & 0xFFFF); + sdrc_block_contents.err_type = + (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF); + sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL); + sdrc_block_contents.dll_b_ctrl = 0x0; + sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); + sdrc_block_contents.cs_0 = 0x0; + sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0); + sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF); + sdrc_block_contents.emr_1_0 = 0x0; + sdrc_block_contents.emr_2_0 = 0x0; + sdrc_block_contents.emr_3_0 = 0x0; + sdrc_block_contents.actim_ctrla_0 = + sdrc_read_reg(SDRC_ACTIM_CTRL_A_0); + sdrc_block_contents.actim_ctrlb_0 = + sdrc_read_reg(SDRC_ACTIM_CTRL_B_0); + sdrc_block_contents.rfr_ctrl_0 = + sdrc_read_reg(SDRC_RFR_CTRL_0); + sdrc_block_contents.cs_1 = 0x0; + sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1); + sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF; + sdrc_block_contents.emr_1_1 = 0x0; + sdrc_block_contents.emr_2_1 = 0x0; + sdrc_block_contents.emr_3_1 = 0x0; + sdrc_block_contents.actim_ctrla_1 = + sdrc_read_reg(SDRC_ACTIM_CTRL_A_1); + sdrc_block_contents.actim_ctrlb_1 = + sdrc_read_reg(SDRC_ACTIM_CTRL_B_1); + sdrc_block_contents.rfr_ctrl_1 = + sdrc_read_reg(SDRC_RFR_CTRL_1); + sdrc_block_contents.dcdl_1_ctrl = 0x0; + sdrc_block_contents.dcdl_2_ctrl = 0x0; + sdrc_block_contents.flags = 0x0; + sdrc_block_contents.block_size = 0x0; + + arm_context_addr = virt_to_phys(omap3_arm_context); + + /* Copy all the contents to the scratchpad location */ + scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + memcpy_toio(scratchpad_address, &scratchpad_contents, + sizeof(scratchpad_contents)); + /* Scratchpad contents being 32 bits, a divide by 4 done here */ + memcpy_toio(scratchpad_address + + scratchpad_contents.prcm_block_offset, + &prcm_block_contents, sizeof(prcm_block_contents)); + memcpy_toio(scratchpad_address + + scratchpad_contents.sdrc_block_offset, + &sdrc_block_contents, sizeof(sdrc_block_contents)); + /* + * Copies the address of the location in SDRAM where ARM + * registers get saved during a MPU OFF transition. + */ + memcpy_toio(scratchpad_address + + scratchpad_contents.sdrc_block_offset + + sizeof(sdrc_block_contents), &arm_context_addr, 4); +} + +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 835f5b7aa4b6..1076dd967390 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -207,6 +207,10 @@ #define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) #define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) +#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860) +#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) +#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C + #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) @@ -217,6 +221,12 @@ extern u32 omap_ctrl_readl(u16 offset); extern void omap_ctrl_writeb(u8 val, u16 offset); extern void omap_ctrl_writew(u16 val, u16 offset); extern void omap_ctrl_writel(u32 val, u16 offset); + +extern void omap3_save_scratchpad_contents(void); +extern void omap3_clear_scratchpad_contents(void); +extern u32 *get_restore_pointer(void); +extern u32 omap3_arm_context[128]; + #else #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 -- cgit v1.2.3-58-ga151 From c96631e13888e9be3a80aae291ed671d4d573ec9 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:49:02 +0530 Subject: OMAP3: PM: SCM context save/restore Add context save and restore for the System Control Module to suport off-mode. ETK and debobs definitions added by Peter De Schrijver. Signed-off-by: Rajendra Nayak Signed-off-by: Peter 'p2' De Schrijver Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 157 +++++++++++++++++++++++++++++- arch/arm/plat-omap/include/plat/control.h | 49 +++++++++- 2 files changed, 202 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 03e1bce3b3bb..3ea417d7a1b5 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -26,6 +26,7 @@ static void __iomem *omap2_ctrl_base; +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { u32 boot_config_ptr; u32 public_restore_ptr; @@ -92,6 +93,47 @@ struct omap3_scratchpad_sdrc_block { */ u32 omap3_arm_context[128]; +struct omap3_control_regs { + u32 sysconfig; + u32 devconf0; + u32 mem_dftrw0; + u32 mem_dftrw1; + u32 msuspendmux_0; + u32 msuspendmux_1; + u32 msuspendmux_2; + u32 msuspendmux_3; + u32 msuspendmux_4; + u32 msuspendmux_5; + u32 sec_ctrl; + u32 devconf1; + u32 csirxfe; + u32 iva2_bootaddr; + u32 iva2_bootmod; + u32 debobs_0; + u32 debobs_1; + u32 debobs_2; + u32 debobs_3; + u32 debobs_4; + u32 debobs_5; + u32 debobs_6; + u32 debobs_7; + u32 debobs_8; + u32 prog_io0; + u32 prog_io1; + u32 dss_dpll_spreading; + u32 core_dpll_spreading; + u32 per_dpll_spreading; + u32 usbhost_dpll_spreading; + u32 pbias_lite; + u32 temp_sensor; + u32 sramldo4; + u32 sramldo5; + u32 csi; +}; + +static struct omap3_control_regs control_context; +#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ + #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) void __init omap2_set_globals_control(struct omap_globals *omap2_globals) @@ -134,7 +176,7 @@ void omap_ctrl_writel(u32 val, u16 offset) __raw_writel(val, OMAP_CTRL_REGADDR(offset)); } -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- * called during bootup @@ -264,4 +306,115 @@ void omap3_save_scratchpad_contents(void) sizeof(sdrc_block_contents), &arm_context_addr, 4); } -#endif /* CONFIG_ARCH_OMAP3 */ +void omap3_control_save_context(void) +{ + control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG); + control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + control_context.mem_dftrw0 = + omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0); + control_context.mem_dftrw1 = + omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1); + control_context.msuspendmux_0 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0); + control_context.msuspendmux_1 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1); + control_context.msuspendmux_2 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2); + control_context.msuspendmux_3 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3); + control_context.msuspendmux_4 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4); + control_context.msuspendmux_5 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5); + control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL); + control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); + control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE); + control_context.iva2_bootaddr = + omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); + control_context.iva2_bootmod = + omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); + control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); + control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); + control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); + control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3)); + control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4)); + control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5)); + control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6)); + control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7)); + control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8)); + control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0); + control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); + control_context.dss_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING); + control_context.core_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING); + control_context.per_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING); + control_context.usbhost_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); + control_context.pbias_lite = + omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); + control_context.temp_sensor = + omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR); + control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4); + control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5); + control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI); + return; +} + +void omap3_control_restore_context(void) +{ + omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG); + omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0); + omap_ctrl_writel(control_context.mem_dftrw0, + OMAP343X_CONTROL_MEM_DFTRW0); + omap_ctrl_writel(control_context.mem_dftrw1, + OMAP343X_CONTROL_MEM_DFTRW1); + omap_ctrl_writel(control_context.msuspendmux_0, + OMAP2_CONTROL_MSUSPENDMUX_0); + omap_ctrl_writel(control_context.msuspendmux_1, + OMAP2_CONTROL_MSUSPENDMUX_1); + omap_ctrl_writel(control_context.msuspendmux_2, + OMAP2_CONTROL_MSUSPENDMUX_2); + omap_ctrl_writel(control_context.msuspendmux_3, + OMAP2_CONTROL_MSUSPENDMUX_3); + omap_ctrl_writel(control_context.msuspendmux_4, + OMAP2_CONTROL_MSUSPENDMUX_4); + omap_ctrl_writel(control_context.msuspendmux_5, + OMAP2_CONTROL_MSUSPENDMUX_5); + omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL); + omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1); + omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE); + omap_ctrl_writel(control_context.iva2_bootaddr, + OMAP343X_CONTROL_IVA2_BOOTADDR); + omap_ctrl_writel(control_context.iva2_bootmod, + OMAP343X_CONTROL_IVA2_BOOTMOD); + omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); + omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); + omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); + omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3)); + omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4)); + omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5)); + omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6)); + omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7)); + omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8)); + omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0); + omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1); + omap_ctrl_writel(control_context.dss_dpll_spreading, + OMAP343X_CONTROL_DSS_DPLL_SPREADING); + omap_ctrl_writel(control_context.core_dpll_spreading, + OMAP343X_CONTROL_CORE_DPLL_SPREADING); + omap_ctrl_writel(control_context.per_dpll_spreading, + OMAP343X_CONTROL_PER_DPLL_SPREADING); + omap_ctrl_writel(control_context.usbhost_dpll_spreading, + OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); + omap_ctrl_writel(control_context.pbias_lite, + OMAP343X_CONTROL_PBIAS_LITE); + omap_ctrl_writel(control_context.temp_sensor, + OMAP343X_CONTROL_TEMP_SENSOR); + omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4); + omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5); + omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI); + return; +} +#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 1076dd967390..8ca73471ba45 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -146,8 +146,51 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) -#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ + + ((i) >> 1) * 4 + (!(i) & 1) * 2) +#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) +#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) +#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) +#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4) +#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8) +#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC) +#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4) +#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8) +#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0) +#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4) + + +/* 34xx PADCONF register offsets */ +#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \ + (i)*2) +#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0) +#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1) +#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2) +#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3) +#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4) +#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5) +#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6) +#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7) +#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8) +#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9) +#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10) +#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11) +#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12) +#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13) +#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14) +#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15) +#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) +#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) + +/* 34xx GENERAL_WKUP regist offsets */ +#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ + 0x008 + (i)) +#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) +#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C) +#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010) +#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) +#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) /* 34xx D2D idle-related pins, handled by PM core */ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 @@ -226,6 +269,8 @@ extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); extern u32 *get_restore_pointer(void); extern u32 omap3_arm_context[128]; +extern void omap3_control_save_context(void); +extern void omap3_control_restore_context(void); #else #define omap_ctrl_base_get() 0 -- cgit v1.2.3-58-ga151 From 3231fc889c114870ca830041fcdeb5d4745304cf Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:49:14 +0530 Subject: OMAP3: PM: restore SRAM functions after off-mode. Generalize the copy of SRAM functions into omap_push_sram_idle() so it can be used on init but also after off-mode transitions. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 10 +++++++--- arch/arm/plat-omap/include/plat/sram.h | 6 ++++++ arch/arm/plat-omap/sram.c | 8 +++++--- 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 391054900a6a..b88da1bcb66c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -749,6 +749,12 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } +void omap_push_sram_idle(void) +{ + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); +} + static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; @@ -786,9 +792,7 @@ static int __init omap3_pm_init(void) goto err2; } - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, - omap34xx_cpu_suspend_sz); - + omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 8974e3fc2691..77799d576bc8 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -68,4 +68,10 @@ extern u32 omap3_sram_configure_core_dpll( u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index a53aa8541730..3e923668778d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -396,22 +396,24 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -void restore_sram_functions(void) +#ifdef CONFIG_PM +void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); } +#endif /* CONFIG_PM */ int __init omap34xx_sram_init(void) { _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, omap3_sram_configure_core_dpll_sz); - + omap_push_sram_idle(); return 0; } #else -- cgit v1.2.3-58-ga151 From fa3c2a4fc99fd7f8c245020303d7e11feadbbac9 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:49:22 +0530 Subject: OMAP3: PM: handle PER/NEON/CORE in idle Expand the powerdomains handled in the idle path to include PER, NEON and CORE. This includes properly clearing the previous powerstates, linking NEON state to MPU state and calling the UART prepare functions for only the appropraite powerdomain transitions (CORE for UART1,2, PER for UART3.) Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 64 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 54 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b88da1bcb66c..05ee05f012ad 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -49,7 +49,10 @@ static LIST_HEAD(pwrst_list); static void (*_omap_sram_idle)(u32 *addr, int save_state); -static struct powerdomain *mpu_pwrdm; +static struct powerdomain *mpu_pwrdm, *neon_pwrdm; +static struct powerdomain *core_pwrdm, *per_pwrdm; + +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); /* * PRCM Interrupt Handler Helper Function @@ -169,13 +172,22 @@ static void omap_sram_idle(void) /* save_state = 1 => Only L1 and logic lost */ /* save_state = 2 => Only L2 lost */ /* save_state = 3 => L1, L2 and logic lost */ - int save_state = 0, mpu_next_state; + int save_state = 0; + int mpu_next_state = PWRDM_POWER_ON; + int per_next_state = PWRDM_POWER_ON; + int core_next_state = PWRDM_POWER_ON; if (!_omap_sram_idle) return; + pwrdm_clear_all_prev_pwrst(mpu_pwrdm); + pwrdm_clear_all_prev_pwrst(neon_pwrdm); + pwrdm_clear_all_prev_pwrst(core_pwrdm); + pwrdm_clear_all_prev_pwrst(per_pwrdm); + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { + case PWRDM_POWER_ON: case PWRDM_POWER_RET: /* No need to save context */ save_state = 0; @@ -187,18 +199,37 @@ static void omap_sram_idle(void) } pwrdm_pre_transition(); - omap2_gpio_prepare_for_retention(); - omap_uart_prepare_idle(0); - omap_uart_prepare_idle(1); - omap_uart_prepare_idle(2); + /* NEON control */ + if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) + set_pwrdm_state(neon_pwrdm, mpu_next_state); + + /* CORE & PER */ + core_next_state = pwrdm_read_next_pwrst(core_pwrdm); + if (core_next_state < PWRDM_POWER_ON) { + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + /* PER changes only with core */ + per_next_state = pwrdm_read_next_pwrst(per_pwrdm); + if (per_next_state < PWRDM_POWER_ON) + omap_uart_prepare_idle(2); + /* Enable IO-PAD wakeup */ + prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + } _omap_sram_idle(NULL, save_state); cpu_init(); - omap_uart_resume_idle(2); - omap_uart_resume_idle(1); - omap_uart_resume_idle(0); - omap2_gpio_resume_after_retention(); + if (core_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + + /* Disable IO-PAD wakeup */ + prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + omap2_gpio_resume_after_retention(); + } pwrdm_post_transition(); @@ -792,6 +823,10 @@ static int __init omap3_pm_init(void) goto err2; } + neon_pwrdm = pwrdm_lookup("neon_pwrdm"); + per_pwrdm = pwrdm_lookup("per_pwrdm"); + core_pwrdm = pwrdm_lookup("core_pwrdm"); + omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); @@ -799,6 +834,15 @@ static int __init omap3_pm_init(void) pm_idle = omap3_pm_idle; + pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm); + /* + * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for + * IO-pad wakeup. Otherwise it will unnecessarily waste power + * waking up PER with every CORE wakeup - see + * http://marc.info/?l=linux-omap&m=121852150710062&w=2 + */ + pwrdm_add_wkdep(per_pwrdm, core_pwrdm); + err1: return ret; err2: -- cgit v1.2.3-58-ga151 From 57f277b0122722ffa1de1b53aceb70646ce9a8e1 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:49:34 +0530 Subject: OMAP3: PM: Restore MMU table entry During the MMU restoration on the restore path from MPU OFF, the page table entry for the page consisting of the code being executed is modified to make MMU return VA=PA. The MMU is then enabled and the original entry is being stored in scratchpad. This patch reads the original values stored in scratchpad, and restores them back. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 05ee05f012ad..8b5bf91dc070 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -29,6 +29,8 @@ #include #include +#include + #include "cm.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -164,6 +166,35 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } +static void restore_control_register(u32 val) +{ + __asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val)); +} + +/* Function to restore the table entry that was modified for enabling MMU */ +static void restore_table_entry(void) +{ + u32 *scratchpad_address; + u32 previous_value, control_reg_value; + u32 *address; + + scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + + /* Get address of entry that was modified */ + address = (u32 *)__raw_readl(scratchpad_address + + OMAP343X_TABLE_ADDRESS_OFFSET); + /* Get the previous value which needs to be restored */ + previous_value = __raw_readl(scratchpad_address + + OMAP343X_TABLE_VALUE_OFFSET); + address = __va(address); + *address = previous_value; + flush_tlb_all(); + control_reg_value = __raw_readl(scratchpad_address + + OMAP343X_CONTROL_REG_VALUE_OFFSET); + /* This will enable caches and prediction */ + restore_control_register(control_reg_value); +} + static void omap_sram_idle(void) { /* Variable to tell what needs to be saved and restored @@ -220,6 +251,10 @@ static void omap_sram_idle(void) _omap_sram_idle(NULL, save_state); cpu_init(); + /* Restore table entry modified during MMU restoration */ + if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) + restore_table_entry(); + if (core_next_state < PWRDM_POWER_ON) { if (per_next_state < PWRDM_POWER_ON) omap_uart_resume_idle(2); -- cgit v1.2.3-58-ga151 From 61255ab9e853ddbbe092328c30921d2ba9434134 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:49:56 +0530 Subject: OMAP3: PM: MPU off-mode support Adds a 'save_state' option when calling into SRAM idle function and adds some minor cleanups of SRAM asm code. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 11 ++++++++++- arch/arm/mach-omap2/sleep34xx.S | 11 ++++------- 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8b5bf91dc070..9fb087607e76 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -223,6 +224,9 @@ static void omap_sram_idle(void) /* No need to save context */ save_state = 0; break; + case PWRDM_POWER_OFF: + save_state = 3; + break; default: /* Invalid state */ printk(KERN_ERR "Invalid mpu state in sram_idle\n"); @@ -248,7 +252,12 @@ static void omap_sram_idle(void) prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); } - _omap_sram_idle(NULL, save_state); + /* + * omap3_arm_context is the location where ARM registers + * get saved. The restore path then reads from this + * location and restores them back. + */ + _omap_sram_idle(omap3_arm_context, save_state); cpu_init(); /* Restore table entry modified during MMU restoration */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 6a749f2fea63..f8d3834bf681 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -36,12 +36,11 @@ OMAP3430_PM_PREPWSTST) #define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ OMAP3430_PM_PREPWSTST) -#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL #define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is * available */ -#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ - OMAP343X_CONTROL_MEM_WKUP +\ - SCRATCHPAD_MEM_OFFS) +#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\ + + SCRATCHPAD_MEM_OFFS) #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) .text @@ -96,7 +95,7 @@ loop: ldmfd sp!, {r0-r12, pc} @ restore regs and return restore: - /* b restore*/ @ Enable to debug restore code + /* b restore*/ @ Enable to debug restore code /* Check what was the reason for mpu reset and store the reason in r9*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost - In this case, we wont be here */ @@ -416,8 +415,6 @@ scratchpad_base: .word SCRATCHPAD_BASE_P sdrc_power: .word SDRC_POWER_V -context_mem: - .word 0x803E3E14 clk_stabilize_delay: .word 0x000001FF assoc_mask: -- cgit v1.2.3-58-ga151 From 2f5939c3ec9440a9c3a0baf4d0e1b2cc043aad46 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 26 Sep 2008 17:50:07 +0530 Subject: OMAP3: PM: CORE domain off-mode support Add context save and restore for CORE powerdomain resources in order to support off-mode. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 73 +++++++++++++++++++++++++++++++++- arch/arm/plat-omap/include/plat/sram.h | 1 + 2 files changed, 73 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 9fb087607e76..bab9b480a089 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -5,6 +5,9 @@ * Tony Lindgren * Jouni Hogander * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak + * * Copyright (C) 2005 Texas Instruments, Inc. * Richard Woodruff * @@ -29,6 +32,8 @@ #include #include #include +#include +#include #include @@ -39,6 +44,11 @@ #include "prm.h" #include "pm.h" +/* Scratchpad offsets */ +#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 +#define OMAP343X_TABLE_VALUE_OFFSET 0x30 +#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 + struct power_state { struct powerdomain *pwrdm; u32 next_state; @@ -57,6 +67,46 @@ static struct powerdomain *core_pwrdm, *per_pwrdm; static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +static inline void omap3_per_save_context(void) +{ + omap_gpio_save_context(); +} + +static inline void omap3_per_restore_context(void) +{ + omap_gpio_restore_context(); +} + +static void omap3_core_save_context(void) +{ + u32 control_padconf_off; + + /* Save the padconf registers */ + control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); + control_padconf_off |= START_PADCONF_SAVE; + omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF); + /* wait for the save to complete */ + while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) + & PADCONF_SAVE_DONE) + ; + /* Save the Interrupt controller context */ + omap_intc_save_context(); + /* Save the GPMC context */ + omap3_gpmc_save_context(); + /* Save the system control module context, padconf already save above*/ + omap3_control_save_context(); +} + +static void omap3_core_restore_context(void) +{ + /* Restore the control module context, padconf restored by h/w */ + omap3_control_restore_context(); + /* Restore the GPMC context */ + omap3_gpmc_restore_context(); + /* Restore the interrupt controller context */ + omap_intc_restore_context(); +} + /* * PRCM Interrupt Handler Helper Function * @@ -208,6 +258,7 @@ static void omap_sram_idle(void) int mpu_next_state = PWRDM_POWER_ON; int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; + int core_prev_state, per_prev_state; if (!_omap_sram_idle) return; @@ -246,8 +297,15 @@ static void omap_sram_idle(void) omap_uart_prepare_idle(1); /* PER changes only with core */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); - if (per_next_state < PWRDM_POWER_ON) + if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); + if (per_next_state == PWRDM_POWER_OFF) + omap3_per_save_context(); + } + if (core_next_state == PWRDM_POWER_OFF) { + omap3_core_save_context(); + omap3_prcm_save_context(); + } /* Enable IO-PAD wakeup */ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); } @@ -272,6 +330,18 @@ static void omap_sram_idle(void) /* Disable IO-PAD wakeup */ prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); + if (core_prev_state == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_prcm_restore_context(); + omap3_sram_restore_context(); + } + if (per_next_state < PWRDM_POWER_ON) { + per_prev_state = + pwrdm_read_prev_pwrst(per_pwrdm); + if (per_prev_state == PWRDM_POWER_OFF) + omap3_per_restore_context(); + } omap2_gpio_resume_after_retention(); } @@ -843,6 +913,7 @@ static int __init omap3_pm_init(void) /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); + omap3_save_scratchpad_contents(); ret = request_irq(INT_34XX_PRCM_MPU_IRQ, (irq_handler_t)prcm_interrupt_handler, diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 77799d576bc8..16a1b458d53c 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll( u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -- cgit v1.2.3-58-ga151 From f2d1185824fd3ed631f3164daeff59d0b4e55d79 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 28 Aug 2008 13:13:31 +0000 Subject: OMAP: PM: DMA context save/restore for off-mode support For HS/EMU devices, these additional features are also used: - DMA interrupt disable routine added - Added DMA controller reset to DMA context restore Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 3 +++ arch/arm/plat-omap/dma.c | 39 +++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/dma.h | 5 +++++ 3 files changed, 47 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index bab9b480a089..54fea79b1720 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -95,6 +96,7 @@ static void omap3_core_save_context(void) omap3_gpmc_save_context(); /* Save the system control module context, padconf already save above*/ omap3_control_save_context(); + omap_dma_global_context_save(); } static void omap3_core_restore_context(void) @@ -105,6 +107,7 @@ static void omap3_core_restore_context(void) omap3_gpmc_restore_context(); /* Restore the interrupt controller context */ omap_intc_restore_context(); + omap_dma_global_context_restore(); } /* diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 3edffde7f439..3105aaa95d75 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -54,6 +54,12 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; static int enable_1510_mode; +static struct omap_dma_global_context_registers { + u32 dma_irqenable_l0; + u32 dma_ocp_sysconfig; + u32 dma_gcr; +} omap_dma_global_context; + struct omap_dma_lch { int next_lch; int dev_id; @@ -2341,6 +2347,39 @@ void omap_stop_lcd_dma(void) } EXPORT_SYMBOL(omap_stop_lcd_dma); +void omap_dma_global_context_save(void) +{ + omap_dma_global_context.dma_irqenable_l0 = + dma_read(IRQENABLE_L0); + omap_dma_global_context.dma_ocp_sysconfig = + dma_read(OCP_SYSCONFIG); + omap_dma_global_context.dma_gcr = dma_read(GCR); +} + +void omap_dma_global_context_restore(void) +{ + dma_write(0x2, OCP_SYSCONFIG); + while (!__raw_readl(omap_dma_base + OMAP_DMA4_SYSSTATUS)) + ; + dma_write(omap_dma_global_context.dma_gcr, GCR); + dma_write(omap_dma_global_context.dma_ocp_sysconfig, + OCP_SYSCONFIG); + dma_write(omap_dma_global_context.dma_irqenable_l0, + IRQENABLE_L0); +} + +void omap_dma_disable_irq(int lch) +{ + u32 val; + + if (cpu_class_is_omap2()) { + /* Disable interrupts */ + val = dma_read(IRQENABLE_L0); + val &= ~(1 << lch); + dma_write(val, IRQENABLE_L0); + } +} + /*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 72f680b7180d..1c017b29b7e9 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -633,6 +633,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); extern int omap_get_dma_index(int lch, int *ei, int *fi); +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + /* Chaining APIs */ #ifndef CONFIG_ARCH_OMAP1 extern int omap_request_dma_chain(int dev_id, const char *dev_name, -- cgit v1.2.3-58-ga151 From 27d59a4a2def42307349079f2e3538d96934c379 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 13 Oct 2008 13:15:00 +0300 Subject: OMAP3 PM: off-mode support for HS/EMU devices For HS/EMU devices, some additional resources need to be saved/restored for off-mode support. Namely, saving the secure RAM and a pointer to it in the scratchpad. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 8 ++++- arch/arm/mach-omap2/pm.h | 3 ++ arch/arm/mach-omap2/pm34xx.c | 43 ++++++++++++++++++++++- arch/arm/mach-omap2/sleep34xx.S | 75 ++++++++++++++++++++++++++++++++++++++++- 4 files changed, 126 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 3ea417d7a1b5..b84cff7087b0 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -85,6 +85,8 @@ struct omap3_scratchpad_sdrc_block { u32 block_size; }; +void *omap3_secure_ram_storage; + /* * This is used to store ARM registers in SDRAM before attempting * an MPU OFF. The save and restore happens from the SRAM sleep code. @@ -209,7 +211,11 @@ void omap3_save_scratchpad_contents(void) scratchpad_contents.boot_config_ptr = 0x0; scratchpad_contents.public_restore_ptr = virt_to_phys(get_restore_pointer()); - scratchpad_contents.secure_ram_restore_ptr = 0x0; + if (omap_type() == OMAP2_DEVICE_TYPE_GP) + scratchpad_contents.secure_ram_restore_ptr = 0x0; + else + scratchpad_contents.secure_ram_restore_ptr = + (u32) __pa(omap3_secure_ram_storage); scratchpad_contents.sdrc_module_semaphore = 0x0; scratchpad_contents.prcm_block_offset = 0x2C; scratchpad_contents.sdrc_block_offset = 0x64; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 85b6face5392..45cafac716d1 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -13,6 +13,8 @@ #include +extern void *omap3_secure_ram_storage; + extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); @@ -36,6 +38,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); extern void omap34xx_cpu_suspend(u32 *addr, int save_state); extern void save_secure_ram_context(u32 *addr); +extern void omap3_save_scratchpad_contents(void); extern unsigned int omap24xx_idle_loop_suspend_sz; extern unsigned int omap34xx_suspend_sz; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 54fea79b1720..ebb88f3aae31 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -63,6 +63,8 @@ static LIST_HEAD(pwrst_list); static void (*_omap_sram_idle)(u32 *addr, int save_state); +static int (*_omap_save_secure_sram)(u32 *addr); + static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; @@ -110,6 +112,33 @@ static void omap3_core_restore_context(void) omap_dma_global_context_restore(); } +static void omap3_save_secure_ram_context(u32 target_mpu_state) +{ + u32 ret; + + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + /* Disable dma irq before calling secure rom code API */ + omap_dma_disable_irq(0); + omap_dma_disable_irq(1); + /* + * MPU next state must be set to POWER_ON temporarily, + * otherwise the WFI executed inside the ROM code + * will hang the system. + */ + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); + ret = _omap_save_secure_sram((u32 *) + __pa(omap3_secure_ram_storage)); + pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + /* Following is for error tracking, it should not happen */ + if (ret) { + printk(KERN_ERR "save_secure_sram() returns %08x\n", + ret); + while (1) + ; + } + } +} + /* * PRCM Interrupt Handler Helper Function * @@ -308,6 +337,7 @@ static void omap_sram_idle(void) if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_prcm_save_context(); + omap3_save_secure_ram_context(mpu_next_state); } /* Enable IO-PAD wakeup */ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); @@ -901,6 +931,9 @@ void omap_push_sram_idle(void) { _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) + _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, + save_secure_ram_context_sz); } static int __init omap3_pm_init(void) @@ -916,7 +949,6 @@ static int __init omap3_pm_init(void) /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); - omap3_save_scratchpad_contents(); ret = request_irq(INT_34XX_PRCM_MPU_IRQ, (irq_handler_t)prcm_interrupt_handler, @@ -961,6 +993,15 @@ static int __init omap3_pm_init(void) */ pwrdm_add_wkdep(per_pwrdm, core_pwrdm); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + omap3_secure_ram_storage = + kmalloc(0x803F, GFP_KERNEL); + if (!omap3_secure_ram_storage) + printk(KERN_ERR "Memory allocation failed when" + "allocating for secure sram context\n"); + } + omap3_save_scratchpad_contents(); + err1: return ret; err2: diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index f8d3834bf681..db75167bc52d 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -37,6 +37,8 @@ #define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ OMAP3430_PM_PREPWSTST) #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL +#define SRAM_BASE_P 0x40200000 +#define CONTROL_STAT 0x480022F0 #define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is * available */ #define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\ @@ -51,6 +53,40 @@ ENTRY(get_restore_pointer) ldmfd sp!, {pc} @ restore regs and return ENTRY(get_restore_pointer_sz) .word . - get_restore_pointer_sz + +/* Function to call rom code to save secure ram context */ +ENTRY(save_secure_ram_context) + stmfd sp!, {r1-r12, lr} @ save registers on stack +save_secure_ram_debug: + /* b save_secure_ram_debug */ @ enable to debug save code + adr r3, api_params @ r3 points to parameters + str r0, [r3,#0x4] @ r0 has sdram address + ldr r12, high_mask + and r3, r3, r12 + ldr r12, sram_phy_addr_mask + orr r3, r3, r12 + mov r0, #25 @ set service ID for PPA + mov r12, r0 @ copy secure service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #7 @ set some flags in r2, r6 + mov r6, #0xff + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + nop + nop + nop + nop + ldmfd sp!, {r1-r12, pc} +sram_phy_addr_mask: + .word SRAM_BASE_P +high_mask: + .word 0xffff +api_params: + .word 0x4, 0x0, 0x0, 0x1, 0x1 +ENTRY(save_secure_ram_context_sz) + .word . - save_secure_ram_context + /* * Forces OMAP into idle state * @@ -107,9 +143,44 @@ restore: moveq r9, #0x3 @ MPU OFF => L1 and L2 lost movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore + ldr r0, control_stat + ldr r1, [r0] + and r1, #0x700 + cmp r1, #0x300 + beq l2_inv_gp + mov r0, #40 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + adr r3, l2_inv_api_params @ r3 points to dummy parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + /* Write to Aux control register to set some bits */ + mov r0, #42 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + adr r3, write_aux_control_params @ r3 points to parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + + b logic_l1_restore +l2_inv_api_params: + .word 0x1, 0x00 +write_aux_control_params: + .word 0x1, 0x72 +l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalide L2 -smi: .word 0xE1600070 @ Call SMI monitor (smieq) +smi: .word 0xE1600070 @ Call SMI monitor (smieq) + /* Write to Aux control register to set some bits */ + mov r0, #0x72 + mov r12, #0x3 + .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: mov r1, #0 /* Invalidate all instruction caches to PoU @@ -429,5 +500,7 @@ table_entry: .word 0x00000C02 cache_pred_disable_mask: .word 0xFFFFE7FB +control_stat: + .word CONTROL_STAT ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend -- cgit v1.2.3-58-ga151 From 9d97140bd0c5da55f174a81dafd2bbef135f5748 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 12 Dec 2008 11:20:05 +0200 Subject: OMAP3: PM: save secure RAM only during init The function omap3_save_secure_ram() is now called only once during the initialization of the device and consequent sleep cycles will re-use the same saved contents for secure RAM. Users who need secure services should do secure RAM saving before entering off-mode, if a secure service has been accessed after last save. There are both latency and reliability issues with saving secure RAM context in the idle path. The context save uses a hardware resource which takes an order of hundreds of milliseconds to initialize after a wake up from off-mode, and also there is no way of checking whether it is ready from kernel side or not. It just crashes if you use it too quickly Additional fix to ensure scratchpad save is done after secure RAM by Roger Quadros. Signed-off-by: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ebb88f3aae31..310c189efb5d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -112,6 +112,12 @@ static void omap3_core_restore_context(void) omap_dma_global_context_restore(); } +/* + * FIXME: This function should be called before entering off-mode after + * OMAP3 secure services have been accessed. Currently it is only called + * once during boot sequence, but this works as we are not using secure + * services. + */ static void omap3_save_secure_ram_context(u32 target_mpu_state) { u32 ret; @@ -337,7 +343,6 @@ static void omap_sram_idle(void) if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_prcm_save_context(); - omap3_save_secure_ram_context(mpu_next_state); } /* Enable IO-PAD wakeup */ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); @@ -999,9 +1004,19 @@ static int __init omap3_pm_init(void) if (!omap3_secure_ram_storage) printk(KERN_ERR "Memory allocation failed when" "allocating for secure sram context\n"); + + local_irq_disable(); + local_fiq_disable(); + + omap_dma_global_context_save(); + omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap_dma_global_context_restore(); + + local_irq_enable(); + local_fiq_enable(); } - omap3_save_scratchpad_contents(); + omap3_save_scratchpad_contents(); err1: return ret; err2: -- cgit v1.2.3-58-ga151 From 13a6fe0f6adf62bf73be055322197507761d160a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 13 Oct 2008 13:17:06 +0300 Subject: OMAP3: PM: Enable SDRAM auto-refresh during sleep Fix for ES3.0 bug: SDRC not sending auto-refresh when OMAP wakes-up from OFF mode (warning for HS devices.) Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 310c189efb5d..3f1f656348fc 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -44,6 +44,13 @@ #include "prm.h" #include "pm.h" +#include "sdrc.h" + +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 @@ -297,6 +304,7 @@ static void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int core_prev_state, per_prev_state; + u32 sdrc_pwr = 0; if (!_omap_sram_idle) return; @@ -348,6 +356,21 @@ static void omap_sram_idle(void) prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); } + /* + * Force SDRAM controller to self-refresh mode after timeout on + * autocount. This is needed on ES3.0 to avoid SDRAM controller + * hang-ups. + */ + if (omap_rev() >= OMAP3430_REV_ES3_0 && + omap_type() != OMAP2_DEVICE_TYPE_GP && + core_next_state == PWRDM_POWER_OFF) { + sdrc_pwr = sdrc_read_reg(SDRC_POWER); + sdrc_write_reg((sdrc_pwr & + ~(SDRC_POWER_AUTOCOUNT_MASK|SDRC_POWER_CLKCTRL_MASK)) | + (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | + SDRC_SELF_REFRESH_ON_AUTOCOUNT, SDRC_POWER); + } + /* * omap3_arm_context is the location where ARM registers * get saved. The restore path then reads from this @@ -356,6 +379,12 @@ static void omap_sram_idle(void) _omap_sram_idle(omap3_arm_context, save_state); cpu_init(); + /* Restore normal SDRAM settings */ + if (omap_rev() >= OMAP3430_REV_ES3_0 && + omap_type() != OMAP2_DEVICE_TYPE_GP && + core_next_state == PWRDM_POWER_OFF) + sdrc_write_reg(sdrc_pwr, SDRC_POWER); + /* Restore table entry modified during MMU restoration */ if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) restore_table_entry(); -- cgit v1.2.3-58-ga151 From 133464dc30846282b5f852433d7b6a31f292f886 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Thu, 5 Feb 2009 13:34:01 +0200 Subject: OMAP3: PM: Save and restore also CM_CLKSEL1_PLL_IVA2 CM_CLKSEL1_PLL_IVA2 is not saved/restored currently. This patch is adding save and restore for it. Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prcm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 56f77df1ffac..221eed11b73f 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -39,6 +39,7 @@ static void __iomem *cm_base; struct omap3_prcm_regs { u32 control_padconf_sys_nirq; + u32 iva2_cm_clksel1; u32 iva2_cm_clksel2; u32 cm_sysconfig; u32 sgx_cm_clksel; @@ -262,6 +263,8 @@ void omap3_prcm_save_context(void) { prcm_context.control_padconf_sys_nirq = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ); + prcm_context.iva2_cm_clksel1 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1); prcm_context.iva2_cm_clksel2 = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); @@ -417,6 +420,8 @@ void omap3_prcm_restore_context(void) { omap_ctrl_writel(prcm_context.control_padconf_sys_nirq, OMAP343X_CONTROL_PADCONF_SYSNIRQ); + cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD, + CM_CLKSEL1); cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, CM_CLKSEL2); __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); -- cgit v1.2.3-58-ga151 From ba50ea7eb9ce663511013b35608cf0753c9ab674 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Thu, 26 Mar 2009 15:59:00 +0200 Subject: OMAP3: PM: Fix secure SRAM context save/restore The secure sram context save uses dma channels 0 and 1. In order to avoid collision between kernel DMA transfers and ROM code dma transfers, we need to reserve DMA channels 0 1 on high security devices. A bug in ROM code leaves dma irq status bits uncleared. Hence those irq status bits need to be cleared when restoring DMA context after off mode. There was also a faulty parameter given to PPA in the secure ram context save assembly code, which caused interrupts to be enabled during secure ram context save. This caused the save to fail sometimes, which resulted the saved context to be corrupted, but also left DMA channels in secure mode. The secure mode DMA channels caused "DMA secure error with device 0" errors to be displayed. Signed-off-by: Kalle Jokiniemi Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 3 --- arch/arm/mach-omap2/sleep34xx.S | 2 +- arch/arm/plat-omap/dma.c | 31 ++++++++++++++++--------------- 3 files changed, 17 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3f1f656348fc..a9f4034aa70a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -130,9 +130,6 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) u32 ret; if (omap_type() != OMAP2_DEVICE_TYPE_GP) { - /* Disable dma irq before calling secure rom code API */ - omap_dma_disable_irq(0); - omap_dma_disable_irq(1); /* * MPU next state must be set to POWER_ON temporarily, * otherwise the WFI executed inside the ROM code diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index db75167bc52d..b6abadccb1c6 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -68,7 +68,7 @@ save_secure_ram_debug: mov r0, #25 @ set service ID for PPA mov r12, r0 @ copy secure service ID in r12 mov r1, #0 @ set task id for ROM code in r1 - mov r2, #7 @ set some flags in r2, r6 + mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 3105aaa95d75..1b5216f1e78d 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2358,26 +2358,20 @@ void omap_dma_global_context_save(void) void omap_dma_global_context_restore(void) { - dma_write(0x2, OCP_SYSCONFIG); - while (!__raw_readl(omap_dma_base + OMAP_DMA4_SYSSTATUS)) - ; dma_write(omap_dma_global_context.dma_gcr, GCR); dma_write(omap_dma_global_context.dma_ocp_sysconfig, OCP_SYSCONFIG); dma_write(omap_dma_global_context.dma_irqenable_l0, IRQENABLE_L0); -} - -void omap_dma_disable_irq(int lch) -{ - u32 val; - if (cpu_class_is_omap2()) { - /* Disable interrupts */ - val = dma_read(IRQENABLE_L0); - val &= ~(1 << lch); - dma_write(val, IRQENABLE_L0); - } + /* + * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared + * after secure sram context save and restore. Hence we need to + * manually clear those IRQs to avoid spurious interrupts. This + * affects only secure devices. + */ + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + dma_write(0x3 , IRQSTATUS_L0); } /*----------------------------------------------------------------------------*/ @@ -2515,8 +2509,8 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } - /* Enable smartidle idlemodes and autoidle */ if (cpu_is_omap34xx()) { + /* Enable smartidle idlemodes and autoidle */ u32 v = dma_read(OCP_SYSCONFIG); v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | DMA_SYSCONFIG_SIDLEMODE_MASK | @@ -2525,6 +2519,13 @@ static int __init omap_init_dma(void) DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | DMA_SYSCONFIG_AUTOIDLE); dma_write(v , OCP_SYSCONFIG); + /* reserve dma channels 0 and 1 in high security devices */ + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + printk(KERN_INFO "Reserving DMA channels 0 and 1 for " + "HS ROM code\n"); + dma_chan[0].dev_id = 0; + dma_chan[1].dev_id = 1; + } } -- cgit v1.2.3-58-ga151 From 8a917d2fc80b7c45ce0146ff134168646274a9bd Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Wed, 13 May 2009 13:32:11 +0300 Subject: ARM: OMAP: SMS: save/restore of SMS_SYSCONFIG for off-mode The SMS_SYSCONFIG register gets reset in off mode, added a save/restore mechanism for that. Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 1 + arch/arm/mach-omap2/sdrc.c | 27 +++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/sdrc.h | 2 ++ 3 files changed, 30 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a9f4034aa70a..90d1dc5884ef 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -399,6 +399,7 @@ static void omap_sram_idle(void) omap3_core_restore_context(); omap3_prcm_restore_context(); omap3_sram_restore_context(); + omap2_sms_restore_context(); } if (per_next_state < PWRDM_POWER_ON) { per_prev_state = diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 07000de48f34..9a592199321c 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -37,11 +37,37 @@ static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +struct omap2_sms_regs { + u32 sms_sysconfig; +}; + +static struct omap2_sms_regs sms_context; + /* SDRC_POWER register bits */ #define SDRC_POWER_EXTCLKDIS_SHIFT 3 #define SDRC_POWER_PWDENA_SHIFT 2 #define SDRC_POWER_PAGEPOLICY_SHIFT 0 +/** + * omap2_sms_save_context - Save SMS registers + * + * Save SMS registers that need to be restored after off mode. + */ +void omap2_sms_save_context(void) +{ + sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG); +} + +/** + * omap2_sms_restore_context - Restore SMS registers + * + * Restore SMS registers that need to be Restored after off mode. + */ +void omap2_sms_restore_context(void) +{ + sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG); +} + /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) @@ -132,4 +158,5 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); + omap2_sms_save_context(); } diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 7b58a5f78ce4..772b71e8b44f 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -120,6 +120,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, int omap2_sdrc_get_params(unsigned long r, struct omap_sdrc_params **sdrc_cs0, struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); #ifdef CONFIG_ARCH_OMAP2 -- cgit v1.2.3-58-ga151 From cb0cb2b815bf073dc0211ab224682a6caf6c89ce Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 12 May 2009 14:02:16 +0300 Subject: OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpad The CM_CLKEN_PLL register saved in scratchpad memory was wrongly using offset of 0x0004 instead of 0x0000. The effect of this was that boot ROM code would restore the wrong value when waking up from off mode. This wrong value, however, will be overwritten by prcm context restore. Still, a short period of wrong clock settings in CM_CLKEN_PLL remained between ROM code and prcm context restore. This is fixed by the patch. Problem reported by: Jouni Hogander Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index b84cff7087b0..c41565ec16e3 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -230,7 +230,7 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.cm_clksel_wkup = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = - cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKEN_PLL); + cm_read_mod_reg(PLL_MOD, CM_CLKEN); prcm_block_contents.cm_autoidle_pll = cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); prcm_block_contents.cm_clksel1_pll = -- cgit v1.2.3-58-ga151 From bf07c9f2d869077cc918b4cda861eadac6df6283 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 20 May 2009 16:58:30 +0300 Subject: OMAP: PM: Clear DMA channel state after a wakeup Clear DMA channel states so that users can assume a known initial state. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 1b5216f1e78d..8836da32d63b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2358,6 +2358,8 @@ void omap_dma_global_context_save(void) void omap_dma_global_context_restore(void) { + int ch; + dma_write(omap_dma_global_context.dma_gcr, GCR); dma_write(omap_dma_global_context.dma_ocp_sysconfig, OCP_SYSCONFIG); @@ -2372,6 +2374,10 @@ void omap_dma_global_context_restore(void) */ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) dma_write(0x3 , IRQSTATUS_L0); + + for (ch = 0; ch < dma_chan_count; ch++) + if (dma_chan[ch].dev_id != -1) + omap_clear_dma(ch); } /*----------------------------------------------------------------------------*/ -- cgit v1.2.3-58-ga151 From 692ec4abb96174c0e4b3aef6d2b71f36a4a14c8b Mon Sep 17 00:00:00 2001 From: Juha Yrjola Date: Mon, 9 Mar 2009 21:21:01 +0000 Subject: OMAP: Store reboot mode in scratchpad on OMAP34xx The reboot mode can be communicated to a bootloader (or the kernel itself) with a scratchpad register. This functionality is especially useful, if userspace is allowed to change the reboot mode. Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prcm.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 221eed11b73f..029d376198d4 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -135,9 +135,18 @@ void omap_prcm_arch_reset(char mode) if (cpu_is_omap24xx()) prcm_offs = WKUP_MOD; - else if (cpu_is_omap34xx()) + else if (cpu_is_omap34xx()) { + u32 l; + prcm_offs = OMAP3430_GR_MOD; - else + l = ('B' << 24) | ('M' << 16) | mode; + /* Reserve the first word in scratchpad for communicating + * with the boot ROM. A pointer to a data structure + * describing the boot process can be stored there, + * cf. OMAP34xx TRM, Initialization / Software Booting + * Configuration. */ + omap_writel(l, OMAP343X_SCRATCHPAD + 4); + } else WARN_ON(1); prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL); -- cgit v1.2.3-58-ga151 From 0795a75a369b931150074a14473f024359b7f25c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 13 Oct 2008 17:58:50 +0300 Subject: OMAP3: PM: SDRC auto-refresh workaround for off-mode Errata: ES3.0, ES3.1 SDRC not sending auto-refresh when OMAP wakes-up from OFF mode Signed-off-by: Tero Kristo Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 9 +++- arch/arm/mach-omap2/sleep34xx.S | 84 ++++++++++++++++++++++++++++++- arch/arm/plat-omap/include/plat/control.h | 1 + 3 files changed, 91 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index c41565ec16e3..2ff8d7cc60a2 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -209,8 +209,13 @@ void omap3_save_scratchpad_contents(void) /* Populate the Scratchpad contents */ scratchpad_contents.boot_config_ptr = 0x0; - scratchpad_contents.public_restore_ptr = - virt_to_phys(get_restore_pointer()); + if (omap_rev() != OMAP3430_REV_ES3_0 && + omap_rev() != OMAP3430_REV_ES3_1) + scratchpad_contents.public_restore_ptr = + virt_to_phys(get_restore_pointer()); + else + scratchpad_contents.public_restore_ptr = + virt_to_phys(get_es3_restore_pointer()); if (omap_type() == OMAP2_DEVICE_TYPE_GP) scratchpad_contents.secure_ram_restore_ptr = 0x0; else diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index b6abadccb1c6..dedfa0e6c639 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -34,6 +34,7 @@ #define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_CORE_P 0x48306AE8 #define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ OMAP3430_PM_PREPWSTST) #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL @@ -44,6 +45,13 @@ #define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\ + SCRATCHPAD_MEM_OFFS) #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) +#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) +#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) +#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0) +#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0) +#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) +#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) +#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) .text /* Function call to get the restore pointer for resume from OFF */ @@ -52,7 +60,59 @@ ENTRY(get_restore_pointer) adr r0, restore ldmfd sp!, {pc} @ restore regs and return ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer_sz + .word . - get_restore_pointer + + .text +/* Function call to get the restore pointer for for ES3 to resume from OFF */ +ENTRY(get_es3_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore_es3 + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_es3_restore_pointer_sz) + .word . - get_es3_restore_pointer + +ENTRY(es3_sdrc_fix) + ldr r4, sdrc_syscfg @ get config addr + ldr r5, [r4] @ get value + tst r5, #0x100 @ is part access blocked + it eq + biceq r5, r5, #0x100 @ clear bit if set + str r5, [r4] @ write back change + ldr r4, sdrc_mr_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_0 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + ldr r4, sdrc_mr_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_1 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + bx lr +sdrc_syscfg: + .word SDRC_SYSCONFIG_P +sdrc_mr_0: + .word SDRC_MR_0_P +sdrc_emr2_0: + .word SDRC_EMR2_0_P +sdrc_manual_0: + .word SDRC_MANUAL_0_P +sdrc_mr_1: + .word SDRC_MR_1_P +sdrc_emr2_1: + .word SDRC_EMR2_1_P +sdrc_manual_1: + .word SDRC_MANUAL_1_P +ENTRY(es3_sdrc_fix_sz) + .word . - es3_sdrc_fix /* Function to call rom code to save secure ram context */ ENTRY(save_secure_ram_context) @@ -130,6 +190,24 @@ loop: bl i_dll_wait ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore_es3: + /*b restore_es3*/ @ Enable to debug restore code + ldr r5, pm_prepwstst_core_p + ldr r4, [r5] + and r4, r4, #0x3 + cmp r4, #0x0 @ Check if previous power state of CORE is OFF + bne restore + adr r0, es3_sdrc_fix + ldr r1, sram_base + ldr r2, es3_sdrc_fix_sz + mov r2, r2, ror #2 +copy_to_sram: + ldmia r0!, {r3} @ val = *src + stmia r1!, {r3} @ *dst = val + subs r2, r2, #0x1 @ num_words-- + bne copy_to_sram + ldr r1, sram_base + blx r1 restore: /* b restore*/ @ Enable to debug restore code /* Check what was the reason for mpu reset and store the reason in r9*/ @@ -478,12 +556,16 @@ i_dll_delay: bx lr pm_prepwstst_core: .word PM_PREPWSTST_CORE_V +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P pm_prepwstst_mpu: .word PM_PREPWSTST_MPU_V pm_pwstctrl_mpu: .word PM_PWSTCTRL_MPU_P scratchpad_base: .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 sdrc_power: .word SDRC_POWER_V clk_stabilize_delay: diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 8ca73471ba45..8237cb9e74fd 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -268,6 +268,7 @@ extern void omap_ctrl_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); extern u32 *get_restore_pointer(void); +extern u32 *get_es3_restore_pointer(void); extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); -- cgit v1.2.3-58-ga151 From 2329e7cc0de3de499d0a0f4e2f73c8f02acbc117 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 12 Mar 2009 18:12:29 +0200 Subject: OMAP3: PM: Fix INTC context save/restore Wrong index was used for ILR. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index ebd3538bd1d4..e9bc782fa414 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -241,7 +241,7 @@ void omap_intc_save_context(void) intc_bank_read_reg(bank, INTC_THRESHOLD); for (i = 0; i < INTCPS_NR_IRQS; i++) intc_context[ind].ilr[i] = - intc_bank_read_reg(bank, (0x100 + 0x4*ind)); + intc_bank_read_reg(bank, (0x100 + 0x4*i)); for (i = 0; i < INTCPS_NR_MIR_REGS; i++) intc_context[ind].mir[i] = intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + @@ -267,7 +267,7 @@ void omap_intc_restore_context(void) bank, INTC_THRESHOLD); for (i = 0; i < INTCPS_NR_IRQS; i++) intc_bank_write_reg(intc_context[ind].ilr[i], - bank, (0x100 + 0x4*ind)); + bank, (0x100 + 0x4*i)); for (i = 0; i < INTCPS_NR_MIR_REGS; i++) intc_bank_write_reg(intc_context[ind].mir[i], &irq_banks[0], INTC_MIR0 + (0x20 * i)); -- cgit v1.2.3-58-ga151 From 867d320b6c30d2478358eafeca0e1a6c60cf06c3 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Thu, 23 Apr 2009 13:58:51 +0300 Subject: PM: Disable usb host HW save and restore The hardware SAVEANDRESTORE mechanism seems to leave USB HOST power domain permanently into active state after one transition from off to active state. Disabling for now. Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomains34xx.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index f70eb2da17e7..fd09b0827df0 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -338,7 +338,13 @@ static struct powerdomain usbhost_pwrdm = { .sleepdep_srcs = dss_per_usbhost_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, - .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */ + /* + * REVISIT: Enabling usb host save and restore mechanism seems to + * leave the usb host domain permanently in ACTIVE mode after + * changing the usb host power domain state from OFF to active once. + * Disabling for now. + */ + /*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */ .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ -- cgit v1.2.3-58-ga151 From 89139dce8a0060d97a46cebde570a8f55c314712 Mon Sep 17 00:00:00 2001 From: Peter 'p2' De Schrijver Date: Fri, 16 Jan 2009 18:53:48 +0200 Subject: OMAP3: PM: Wait for SDRC ready iso a blind delay This patch improves the wakeup SRAM code polling the SDRC to become ready instead of just waiting for a fixed amount of time. Signed-off-by: Peter 'p2' De Schrijver Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep34xx.S | 48 ++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index dedfa0e6c639..15268f8b61de 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -29,6 +29,7 @@ #include #include +#include "cm.h" #include "prm.h" #include "sdrc.h" @@ -38,6 +39,7 @@ #define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ OMAP3430_PM_PREPWSTST) #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL +#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) #define SRAM_BASE_P 0x40200000 #define CONTROL_STAT 0x480022F0 #define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is @@ -52,6 +54,8 @@ #define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) #define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) #define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) +#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) .text /* Function call to get the restore pointer for resume from OFF */ @@ -187,7 +191,7 @@ loop: nop nop nop - bl i_dll_wait + bl wait_sdrc_ok ldmfd sp!, {r0-r12, pc} @ restore regs and return restore_es3: @@ -539,21 +543,41 @@ skip_l2_inval: nop nop nop - bl i_dll_wait + bl wait_sdrc_ok /* restore regs and return */ ldmfd sp!, {r0-r12, pc} -i_dll_wait: - ldr r4, clk_stabilize_delay +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + ldr r4, cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 + cmp r5, #0 + bne wait_sdrc_ok + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] +wait_dll_lock: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bxne lr + /* wait till dll locks */ + ldr r4, sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr -i_dll_delay: - subs r4, r4, #0x1 - bne i_dll_delay - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] - bx lr +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V pm_prepwstst_core: .word PM_PREPWSTST_CORE_V pm_prepwstst_core_p: -- cgit v1.2.3-58-ga151 From c40552bc82166adb21a1a7fcb1dc4e76352b1b79 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 6 Oct 2009 14:25:09 -0700 Subject: OMAP3: PM debug: allow runtime toggle of PM features Allow enable/disable of low-power states during idle. To enable low-power idle: echo 1 > /debug/pm_debug/sleep_while_idle to disable: echo 0 > /debug/pm_debug/sleep_while_idle Also allow enable/disable of OFF-mode. To enable: echo 1 > /debug/pm_debug/enable_off_mode to disable: echo 0 > /debug/pm_debug/enable_off_mode Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 27 +++++++++++++++++++++++++++ arch/arm/mach-omap2/pm.h | 4 ++++ arch/arm/mach-omap2/pm34xx.c | 22 ++++++++++++++++++++++ arch/arm/mach-omap2/serial.c | 2 -- 4 files changed, 53 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 7eb2c12c8b7c..1725da3f4e18 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -527,6 +527,29 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; } +static int option_get(void *data, u64 *val) +{ + u32 *option = data; + + *val = *option; + + return 0; +} + +static int option_set(void *data, u64 val) +{ + u32 *option = data; + + *option = val; + + if (option == &enable_off_mode) + omap3_pm_off_mode_enable(val); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); + static int __init pm_dbg_init(void) { int i; @@ -569,6 +592,10 @@ static int __init pm_dbg_init(void) } + (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d, + &enable_off_mode, &pm_dbg_option_fops); + (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, + &sleep_while_idle, &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45cafac716d1..9582793ce82d 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -13,7 +13,11 @@ #include +extern u32 enable_off_mode; +extern u32 sleep_while_idle; + extern void *omap3_secure_ram_storage; +extern void omap3_pm_off_mode_enable(int); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 90d1dc5884ef..ade2e4a6bb7d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,9 @@ #define OMAP343X_TABLE_VALUE_OFFSET 0x30 #define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 +u32 enable_off_mode; +u32 sleep_while_idle; + struct power_state { struct powerdomain *pwrdm; u32 next_state; @@ -456,6 +460,8 @@ static int omap3_fclks_active(void) static int omap3_can_sleep(void) { + if (!sleep_while_idle) + return 0; if (!omap_uart_can_sleep()) return 0; if (omap3_fclks_active()) @@ -900,6 +906,22 @@ static void __init prcm_setup_regs(void) omap3_d2d_idle(); } +void omap3_pm_off_mode_enable(int enable) +{ + struct power_state *pwrst; + u32 state; + + if (enable) + state = PWRDM_POWER_OFF; + else + state = PWRDM_POWER_RET; + + list_for_each_entry(pwrst, &pwrst_list, node) { + pwrst->next_state = state; + set_pwrdm_state(pwrst->pwrdm, state); + } +} + int omap3_pm_get_suspend_state(struct powerdomain *pwrdm) { struct power_state *pwrst; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a5aecffe03ff..72df1b188135 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -155,8 +155,6 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) -static int enable_off_mode; /* to be removed by full off-mode patches */ - static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; -- cgit v1.2.3-58-ga151 From d7814e4df6e9c54680a30de3f439c66a2a55ce94 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 6 Oct 2009 14:30:23 -0700 Subject: PM debug: allow configurable wakeup from suspend on OMAP GPtimer Using debugfs, export a configurable wakeup timer to be used to wakeup system from suspend. If a non-zero value is written to /debug/pm_debug/wakeup_timer_seconds, A timer wakeup event will wake the system and resume after the configured number of seconds. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm-debug.c | 2 ++ arch/arm/mach-omap2/pm.h | 3 +++ arch/arm/mach-omap2/pm34xx.c | 21 +++++++++++++++++++++ arch/arm/mach-omap2/timer-gp.c | 2 ++ 4 files changed, 28 insertions(+) diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 1725da3f4e18..8baa30d2acfb 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -596,6 +596,8 @@ static int __init pm_dbg_init(void) &enable_off_mode, &pm_dbg_option_fops); (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, &sleep_while_idle, &pm_dbg_option_fops); + (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, + &wakeup_timer_seconds, &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 9582793ce82d..7eb769f4ef30 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -22,6 +22,9 @@ extern void omap3_pm_off_mode_enable(int); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); +extern u32 wakeup_timer_seconds; +extern struct omap_dm_timer *gptimer_wakeup; + #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ade2e4a6bb7d..ff818aaec6c5 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -36,6 +36,7 @@ #include #include #include +#include #include @@ -60,6 +61,7 @@ u32 enable_off_mode; u32 sleep_while_idle; +u32 wakeup_timer_seconds; struct power_state { struct powerdomain *pwrdm; @@ -535,6 +537,22 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; +static void omap2_pm_wakeup_on_timer(u32 seconds) +{ + u32 tick_rate, cycles; + + if (!seconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n", + seconds, cycles, tick_rate); +} + static int omap3_pm_prepare(void) { disable_hlt(); @@ -546,6 +564,9 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; + if (wakeup_timer_seconds) + omap2_pm_wakeup_on_timer(wakeup_timer_seconds); + /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index df2b7094de98..cd04deaa88c5 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -47,6 +47,7 @@ static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; static u8 __initdata inited; +struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -134,6 +135,7 @@ static void __init omap2_gp_clockevent_init(void) gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); + gptimer_wakeup = gptimer; #if defined(CONFIG_OMAP_32K_TIMER) src = OMAP_TIMER_SRC_32_KHZ; -- cgit v1.2.3-58-ga151 From 658ce97ef57f4c0737bfcb76050400b53389ed6b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 4 Nov 2008 20:50:52 -0800 Subject: OMAP3: PM: decouple PER and CORE context save and restore Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 51 +++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ff818aaec6c5..d8a6e10ac315 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -338,19 +338,20 @@ static void omap_sram_idle(void) if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) set_pwrdm_state(neon_pwrdm, mpu_next_state); - /* CORE & PER */ + /* PER */ + per_next_state = pwrdm_read_next_pwrst(per_pwrdm); + if (per_next_state < PWRDM_POWER_ON) { + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(2); + if (per_next_state == PWRDM_POWER_OFF) + omap3_per_save_context(); + } + + /* CORE */ core_next_state = pwrdm_read_next_pwrst(core_pwrdm); if (core_next_state < PWRDM_POWER_ON) { - omap2_gpio_prepare_for_retention(); omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); - /* PER changes only with core */ - per_next_state = pwrdm_read_next_pwrst(per_pwrdm); - if (per_next_state < PWRDM_POWER_ON) { - omap_uart_prepare_idle(2); - if (per_next_state == PWRDM_POWER_OFF) - omap3_per_save_context(); - } if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_prcm_save_context(); @@ -392,14 +393,8 @@ static void omap_sram_idle(void) if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) restore_table_entry(); + /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - if (per_next_state < PWRDM_POWER_ON) - omap_uart_resume_idle(2); - omap_uart_resume_idle(1); - omap_uart_resume_idle(0); - - /* Disable IO-PAD wakeup */ - prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); if (core_prev_state == PWRDM_POWER_OFF) { omap3_core_restore_context(); @@ -407,15 +402,27 @@ static void omap_sram_idle(void) omap3_sram_restore_context(); omap2_sms_restore_context(); } - if (per_next_state < PWRDM_POWER_ON) { - per_prev_state = - pwrdm_read_prev_pwrst(per_pwrdm); - if (per_prev_state == PWRDM_POWER_OFF) - omap3_per_restore_context(); - } + omap_uart_resume_idle(0); + omap_uart_resume_idle(1); + if (core_next_state == PWRDM_POWER_OFF) + prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF, + OMAP3430_GR_MOD, + OMAP3_PRM_VOLTCTRL_OFFSET); + } + + /* PER */ + if (per_next_state < PWRDM_POWER_ON) { + per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + omap_uart_resume_idle(2); + if (per_prev_state == PWRDM_POWER_OFF) + omap3_per_restore_context(); omap2_gpio_resume_after_retention(); } + /* Disable IO-PAD wakeup */ + if (core_next_state < PWRDM_POWER_ON) + prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + pwrdm_post_transition(); } -- cgit v1.2.3-58-ga151 From ecf157d0b38953cdefa2c8fb7ccb5a62db242aef Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 1 Dec 2008 13:17:29 +0200 Subject: OMAP3: PM: Prevent PER from going OFF when CORE is going INA OMAP3 can't generate wakeups in this state, thus it is not permitted. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index d8a6e10ac315..55567bf5ccbf 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -308,6 +308,7 @@ static void omap_sram_idle(void) int core_next_state = PWRDM_POWER_ON; int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; + int per_state_modified = 0; if (!_omap_sram_idle) return; @@ -340,15 +341,21 @@ static void omap_sram_idle(void) /* PER */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); + core_next_state = pwrdm_read_next_pwrst(core_pwrdm); if (per_next_state < PWRDM_POWER_ON) { - omap2_gpio_prepare_for_retention(); omap_uart_prepare_idle(2); - if (per_next_state == PWRDM_POWER_OFF) - omap3_per_save_context(); + omap2_gpio_prepare_for_retention(); + if (per_next_state == PWRDM_POWER_OFF) { + if (core_next_state == PWRDM_POWER_ON) { + per_next_state = PWRDM_POWER_RET; + pwrdm_set_next_pwrst(per_pwrdm, per_next_state); + per_state_modified = 1; + } else + omap3_per_save_context(); + } } /* CORE */ - core_next_state = pwrdm_read_next_pwrst(core_pwrdm); if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); @@ -413,10 +420,12 @@ static void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); - omap_uart_resume_idle(2); if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); omap2_gpio_resume_after_retention(); + omap_uart_resume_idle(2); + if (per_state_modified) + pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); } /* Disable IO-PAD wakeup */ -- cgit v1.2.3-58-ga151 From c16c3f672defb7aca1276065375fe1ee5ca003dc Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 11 Dec 2008 16:46:57 +0200 Subject: OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE MPU and CORE should stay awake if there is CAM domain ACTIVE. This is because that module doesn't have wake-up capability. This should replace the patch that is currently in the PM branch. Signed-off-by: Jouni Hogander Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 55567bf5ccbf..7623edabc419 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -80,6 +80,7 @@ static int (*_omap_save_secure_sram)(u32 *addr); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; +static struct powerdomain *cam_pwrdm; static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); @@ -355,6 +356,9 @@ static void omap_sram_idle(void) } } + if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) + omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); + /* CORE */ if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); @@ -434,6 +438,7 @@ static void omap_sram_idle(void) pwrdm_post_transition(); + omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } /* @@ -1067,6 +1072,7 @@ static int __init omap3_pm_init(void) neon_pwrdm = pwrdm_lookup("neon_pwrdm"); per_pwrdm = pwrdm_lookup("per_pwrdm"); core_pwrdm = pwrdm_lookup("core_pwrdm"); + cam_pwrdm = pwrdm_lookup("cam_pwrdm"); omap_push_sram_idle(); #ifdef CONFIG_SUSPEND -- cgit v1.2.3-58-ga151 From 3a7ec26bb44988051d97479f6dfcfd4942a99049 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Thu, 26 Mar 2009 15:59:01 +0200 Subject: OMAP3: PM: Enable IO-CHAIN wakeup OMAP 3430 ES3.1 chips have a separate bit for IO daisy-chain wake up enabling. It needs to be enabled when entering retention or off state, otherwise waking up might not work in all situations. Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 38 +++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/prm-regbits-34xx.h | 2 ++ 2 files changed, 37 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7623edabc419..511a57dc7015 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -94,6 +94,35 @@ static inline void omap3_per_restore_context(void) omap_gpio_restore_context(); } +static void omap3_enable_io_chain(void) +{ + int timeout = 0; + + if (omap_rev() >= OMAP3430_REV_ES3_1) { + prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); + /* Do a readback to assure write has been done */ + prm_read_mod_reg(WKUP_MOD, PM_WKEN); + + while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN)) { + timeout++; + if (timeout > 1000) { + printk(KERN_ERR "Wake up daisy chain " + "activation failed.\n"); + return; + } + prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN, + WKUP_MOD, PM_WKST); + } + } +} + +static void omap3_disable_io_chain(void) +{ + if (omap_rev() >= OMAP3430_REV_ES3_1) + prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); +} + static void omap3_core_save_context(void) { u32 control_padconf_off; @@ -367,8 +396,9 @@ static void omap_sram_idle(void) omap3_core_save_context(); omap3_prcm_save_context(); } - /* Enable IO-PAD wakeup */ + /* Enable IO-PAD and IO-CHAIN wakeups */ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + omap3_enable_io_chain(); } /* @@ -432,9 +462,11 @@ static void omap_sram_idle(void) pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); } - /* Disable IO-PAD wakeup */ - if (core_next_state < PWRDM_POWER_ON) + /* Disable IO-PAD and IO-CHAIN wakeup */ + if (core_next_state < PWRDM_POWER_ON) { prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + omap3_disable_io_chain(); + } pwrdm_post_transition(); diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 9fd03a2ec95c..8f21bae6dc1c 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -365,6 +365,7 @@ /* PM_PREPWSTST_GFX specific bits */ /* PM_WKEN_WKUP specific bits */ +#define OMAP3430_EN_IO_CHAIN (1 << 16) #define OMAP3430_EN_IO (1 << 8) #define OMAP3430_EN_GPIO1 (1 << 3) @@ -373,6 +374,7 @@ /* PM_IVA2GRPSEL_WKUP specific bits */ /* PM_WKST_WKUP specific bits */ +#define OMAP3430_ST_IO_CHAIN (1 << 16) #define OMAP3430_ST_IO (1 << 8) /* PRM_CLKSEL */ -- cgit v1.2.3-58-ga151 From f265dc4c5d39f2bd369d97c87a7bd89061b159d4 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 9 Jun 2009 22:30:41 +0530 Subject: OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT Due to an OMAP3 errata (1.142), on HS/EMU devices SDRC should be programed to issue automatic self refresh on timeout of AUTO_CNT = 1 prior to any transition to OFF mode. This is needed only on sil rev's ES3.0 and above. This patch enables the above needed WA in the SDRC power register value stored in scratchpad, so that ROM code restores this value in SDRC POWER on the wakeup path. The original SDRC POWER register value is stored and restored back in omap_sram_idle() function. This fixes some random crashes observed while stressing suspend on HS/EMU devices. Signed-off-by: Rajendra Nayak Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/control.c | 16 +++++++++++++++- arch/arm/mach-omap2/pm34xx.c | 24 +++++++----------------- arch/arm/plat-omap/include/plat/sdrc.h | 6 ++++++ 3 files changed, 28 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 2ff8d7cc60a2..cdd1f35636dd 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -265,7 +265,21 @@ void omap3_save_scratchpad_contents(void) (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF); sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL); sdrc_block_contents.dll_b_ctrl = 0x0; - sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); + /* + * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should + * be programed to issue automatic self refresh on timeout + * of AUTO_CNT = 1 prior to any transition to OFF mode. + */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP) + && (omap_rev() >= OMAP3430_REV_ES3_0)) + sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) & + ~(SDRC_POWER_AUTOCOUNT_MASK| + SDRC_POWER_CLKCTRL_MASK)) | + (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | + SDRC_SELF_REFRESH_ON_AUTOCOUNT; + else + sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); + sdrc_block_contents.cs_0 = 0x0; sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0); sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 511a57dc7015..01b95eaae75a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -48,12 +48,6 @@ #include "pm.h" #include "sdrc.h" -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 #define OMAP343X_TABLE_VALUE_OFFSET 0x30 @@ -402,19 +396,15 @@ static void omap_sram_idle(void) } /* - * Force SDRAM controller to self-refresh mode after timeout on - * autocount. This is needed on ES3.0 to avoid SDRAM controller - * hang-ups. - */ + * On EMU/HS devices ROM code restores a SRDC value + * from scratchpad which has automatic self refresh on timeout + * of AUTO_CNT = 1 enabled. This takes care of errata 1.142. + * Hence store/restore the SDRC_POWER register here. + */ if (omap_rev() >= OMAP3430_REV_ES3_0 && omap_type() != OMAP2_DEVICE_TYPE_GP && - core_next_state == PWRDM_POWER_OFF) { + core_next_state == PWRDM_POWER_OFF) sdrc_pwr = sdrc_read_reg(SDRC_POWER); - sdrc_write_reg((sdrc_pwr & - ~(SDRC_POWER_AUTOCOUNT_MASK|SDRC_POWER_CLKCTRL_MASK)) | - (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | - SDRC_SELF_REFRESH_ON_AUTOCOUNT, SDRC_POWER); - } /* * omap3_arm_context is the location where ARM registers @@ -424,7 +414,7 @@ static void omap_sram_idle(void) _omap_sram_idle(omap3_arm_context, save_state); cpu_init(); - /* Restore normal SDRAM settings */ + /* Restore normal SDRC POWER settings */ if (omap_rev() >= OMAP3430_REV_ES3_0 && omap_type() != OMAP2_DEVICE_TYPE_GP && core_next_state == PWRDM_POWER_OFF) diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 772b71e8b44f..f704030d2a70 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -44,6 +44,12 @@ #define SDRC_RFR_CTRL_1 0x0D4 #define SDRC_MANUAL_1 0x0D8 +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + /* * These values represent the number of memory clock cycles between * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 -- cgit v1.2.3-58-ga151 From 99e6a4d22f7c7bda0cd8978333c2e85fba02f181 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 8 Oct 2008 17:30:58 +0530 Subject: OMAP3: PM: CPUidle: base driver and support for C1-C2 Basic CPUidle driver for OMAP3 with deepest sleep state supported being MPU CSWR. Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/cpuidle34xx.c | 255 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/pm.h | 1 + arch/arm/mach-omap2/pm34xx.c | 4 +- 4 files changed, 260 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/cpuidle34xx.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8cb16777661a..1d54ad349bfd 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -31,7 +31,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c new file mode 100644 index 000000000000..858b216b63b6 --- /dev/null +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/mach-omap2/cpuidle34xx.c + * + * OMAP3 CPU IDLE Routines + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Rajendra Nayak + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Karthik Dasu + * + * Copyright (C) 2006 Nokia Corporation + * Tony Lindgren + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include +#include + +#ifdef CONFIG_CPU_IDLE + +#define OMAP3_MAX_STATES 7 +#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */ +#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */ +#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */ +#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */ +#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */ +#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */ + +struct omap3_processor_cx { + u8 valid; + u8 type; + u32 sleep_latency; + u32 wakeup_latency; + u32 mpu_state; + u32 core_state; + u32 threshold; + u32 flags; +}; + +struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; +struct omap3_processor_cx current_cx_state; +struct powerdomain *mpu_pd; + +static int omap3_idle_bm_check(void) +{ + return 0; +} + +/** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @state: The target state to be programmed + * + * Called from the CPUidle framework to program the device to the + * specified target state selected by the governor. + */ +static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct timespec ts_preidle, ts_postidle, ts_idle; + + current_cx_state = *cx; + + /* Used to keep track of the total time in idle */ + getnstimeofday(&ts_preidle); + + local_irq_disable(); + local_fiq_disable(); + + /* Program MPU to target state */ + if (cx->mpu_state < PWRDM_POWER_ON) + pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state); + + /* Execute ARM wfi */ + omap_sram_idle(); + + /* Program MPU to ON */ + if (cx->mpu_state < PWRDM_POWER_ON) + pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON); + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + + local_irq_enable(); + local_fiq_enable(); + + return timespec_to_ns(&ts_idle); +} + +/** + * omap3_enter_idle_bm - Checks for any bus activity + * @dev: cpuidle device + * @state: The target state to be programmed + * + * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This + * function checks for any pending activity and then programs the + * device to the specified or a safer state. + */ +static int omap3_enter_idle_bm(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { + if (dev->safe_state) + return dev->safe_state->enter(dev, dev->safe_state); + } + return omap3_enter_idle(dev, state); +} + +DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); + +/* omap3_init_power_states - Initialises the OMAP3 specific C states. + * + * Below is the desciption of each C state. + * C1 . MPU WFI + Core active + * C2 . MPU CSWR + Core active + * C3 . MPU OFF + Core active + * C4 . MPU CSWR + Core CSWR + * C5 . MPU OFF + Core CSWR + * C6 . MPU OFF + Core OFF + */ +void omap_init_power_states(void) +{ + /* C1 . MPU WFI + Core active */ + omap3_power_states[OMAP3_STATE_C1].valid = 1; + omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; + omap3_power_states[OMAP3_STATE_C1].sleep_latency = 10; + omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 10; + omap3_power_states[OMAP3_STATE_C1].threshold = 30; + omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; + + /* C2 . MPU CSWR + Core active */ + omap3_power_states[OMAP3_STATE_C2].valid = 1; + omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; + omap3_power_states[OMAP3_STATE_C2].sleep_latency = 50; + omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 50; + omap3_power_states[OMAP3_STATE_C2].threshold = 300; + omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; + + /* C3 . MPU OFF + Core active */ + omap3_power_states[OMAP3_STATE_C3].valid = 0; + omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; + omap3_power_states[OMAP3_STATE_C3].sleep_latency = 1500; + omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 1800; + omap3_power_states[OMAP3_STATE_C3].threshold = 4000; + omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID; + + /* C4 . MPU CSWR + Core CSWR*/ + omap3_power_states[OMAP3_STATE_C4].valid = 0; + omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; + omap3_power_states[OMAP3_STATE_C4].sleep_latency = 2500; + omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 7500; + omap3_power_states[OMAP3_STATE_C4].threshold = 12000; + omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C5 . MPU OFF + Core CSWR */ + omap3_power_states[OMAP3_STATE_C5].valid = 0; + omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; + omap3_power_states[OMAP3_STATE_C5].sleep_latency = 3000; + omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 8500; + omap3_power_states[OMAP3_STATE_C5].threshold = 15000; + omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C6 . MPU OFF + Core OFF */ + omap3_power_states[OMAP3_STATE_C6].valid = 0; + omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; + omap3_power_states[OMAP3_STATE_C6].sleep_latency = 10000; + omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 30000; + omap3_power_states[OMAP3_STATE_C6].threshold = 300000; + omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; +} + +struct cpuidle_driver omap3_idle_driver = { + .name = "omap3_idle", + .owner = THIS_MODULE, +}; + +/** + * omap3_idle_init - Init routine for OMAP3 idle + * + * Registers the OMAP3 specific cpuidle driver with the cpuidle + * framework with the valid set of states. + */ +int omap3_idle_init(void) +{ + int i, count = 0; + struct omap3_processor_cx *cx; + struct cpuidle_state *state; + struct cpuidle_device *dev; + + mpu_pd = pwrdm_lookup("mpu_pwrdm"); + + omap_init_power_states(); + cpuidle_register_driver(&omap3_idle_driver); + + dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + + for (i = 1; i < OMAP3_MAX_STATES; i++) { + cx = &omap3_power_states[i]; + state = &dev->states[count]; + + if (!cx->valid) + continue; + cpuidle_set_statedata(state, cx); + state->exit_latency = cx->sleep_latency + cx->wakeup_latency; + state->target_residency = cx->threshold; + state->flags = cx->flags; + state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? + omap3_enter_idle_bm : omap3_enter_idle; + if (cx->type == OMAP3_STATE_C1) + dev->safe_state = state; + sprintf(state->name, "C%d", count+1); + count++; + } + + if (!count) + return -EINVAL; + dev->state_count = count; + + if (cpuidle_register_device(dev)) { + printk(KERN_ERR "%s: CPUidle register device failed\n", + __func__); + return -EIO; + } + + return 0; +} +device_initcall(omap3_idle_init); +#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 7eb769f4ef30..2edf1ba12dca 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -18,6 +18,7 @@ extern u32 sleep_while_idle; extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); +extern void omap_sram_idle(void); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 01b95eaae75a..0c49db8afa99 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -318,7 +318,7 @@ static void restore_table_entry(void) restore_control_register(control_reg_value); } -static void omap_sram_idle(void) +void omap_sram_idle(void) { /* Variable to tell what needs to be saved and restored * in omap_sram_idle*/ @@ -1101,7 +1101,9 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ +#ifndef CONFIG_CPU_IDLE pm_idle = omap3_pm_idle; +#endif pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm); /* -- cgit v1.2.3-58-ga151 From 20b01669885483ba2102d5a71c662bb6ae1bed0b Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 8 Oct 2008 17:31:22 +0530 Subject: OMAP3: PM: CPUidle: support retention and off-mode C-states This patch adds support and enables state C4(MPU RET + CORE RET) and MPU OFF states (C3 and C5.) Signed-off-by: Rajendra Nayak Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 28 ++++++++++++++++------------ arch/arm/mach-omap2/pm.h | 2 ++ arch/arm/mach-omap2/pm34xx.c | 6 ++---- 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 858b216b63b6..0bf1bc359ea8 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -26,6 +26,8 @@ #include #include +#include +#include #ifdef CONFIG_CPU_IDLE @@ -50,10 +52,12 @@ struct omap3_processor_cx { struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd; +struct powerdomain *mpu_pd, *core_pd; static int omap3_idle_bm_check(void) { + if (!omap3_can_sleep()) + return 1; return 0; } @@ -79,24 +83,23 @@ static int omap3_enter_idle(struct cpuidle_device *dev, local_irq_disable(); local_fiq_disable(); - /* Program MPU to target state */ - if (cx->mpu_state < PWRDM_POWER_ON) - pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state); + set_pwrdm_state(mpu_pd, cx->mpu_state); + set_pwrdm_state(core_pd, cx->core_state); + + if (omap_irq_pending()) + goto return_sleep_time; /* Execute ARM wfi */ omap_sram_idle(); - /* Program MPU to ON */ - if (cx->mpu_state < PWRDM_POWER_ON) - pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON); - +return_sleep_time: getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); local_irq_enable(); local_fiq_enable(); - return timespec_to_ns(&ts_idle); + return (u32)timespec_to_ns(&ts_idle)/1000; } /** @@ -153,7 +156,7 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; /* C3 . MPU OFF + Core active */ - omap3_power_states[OMAP3_STATE_C3].valid = 0; + omap3_power_states[OMAP3_STATE_C3].valid = 1; omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; omap3_power_states[OMAP3_STATE_C3].sleep_latency = 1500; omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 1800; @@ -163,7 +166,7 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID; /* C4 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C4].valid = 0; + omap3_power_states[OMAP3_STATE_C4].valid = 1; omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; omap3_power_states[OMAP3_STATE_C4].sleep_latency = 2500; omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 7500; @@ -174,7 +177,7 @@ void omap_init_power_states(void) CPUIDLE_FLAG_CHECK_BM; /* C5 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C5].valid = 0; + omap3_power_states[OMAP3_STATE_C5].valid = 1; omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; omap3_power_states[OMAP3_STATE_C5].sleep_latency = 3000; omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 8500; @@ -215,6 +218,7 @@ int omap3_idle_init(void) struct cpuidle_device *dev; mpu_pd = pwrdm_lookup("mpu_pwrdm"); + core_pd = pwrdm_lookup("core_pwrdm"); omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 2edf1ba12dca..379e35034ccc 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -19,6 +19,8 @@ extern u32 sleep_while_idle; extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); +extern int omap3_can_sleep(void); +extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0c49db8afa99..69c47edcc0f2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -76,8 +76,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); - static inline void omap3_per_save_context(void) { omap_gpio_save_context(); @@ -503,7 +501,7 @@ static int omap3_fclks_active(void) return 0; } -static int omap3_can_sleep(void) +int omap3_can_sleep(void) { if (!sleep_while_idle) return 0; @@ -517,7 +515,7 @@ static int omap3_can_sleep(void) /* This sets pwrdm state (other than mpu & core. Currently only ON & * RET are supported. Function is assuming that clkdm doesn't have * hw_sup mode enabled. */ -static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) { u32 cur_state; int sleep_switch = 0; -- cgit v1.2.3-58-ga151 From c98e223006ffd4c5e4cd0f75c5a10bd2b45508d5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 28 Oct 2008 17:30:07 -0700 Subject: OMAP3: PM: CPUidle: obey enable_off_mode flag If 'enable_off_mode' is not set, force powerdomain states to RET instead of OFF. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 0bf1bc359ea8..1120494064d5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -29,6 +29,8 @@ #include #include +#include "pm.h" + #ifdef CONFIG_CPU_IDLE #define OMAP3_MAX_STATES 7 @@ -74,6 +76,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, { struct omap3_processor_cx *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; + u32 mpu_state = cx->mpu_state, core_state = cx->core_state; current_cx_state = *cx; @@ -83,8 +86,15 @@ static int omap3_enter_idle(struct cpuidle_device *dev, local_irq_disable(); local_fiq_disable(); - set_pwrdm_state(mpu_pd, cx->mpu_state); - set_pwrdm_state(core_pd, cx->core_state); + if (!enable_off_mode) { + if (mpu_state < PWRDM_POWER_RET) + mpu_state = PWRDM_POWER_RET; + if (core_state < PWRDM_POWER_RET) + core_state = PWRDM_POWER_RET; + } + + set_pwrdm_state(mpu_pd, mpu_state); + set_pwrdm_state(core_pd, core_state); if (omap_irq_pending()) goto return_sleep_time; -- cgit v1.2.3-58-ga151 From 0f724ed92b0ad152a03b7a194815787eeeec17a4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 28 Oct 2008 17:32:11 -0700 Subject: OMAP3: PM: CPUidle: check activity for C2, C3, correct accounting Use the activity check for states C2 and C3 as well. This is primarily to prevent deeper states during UART activity. Also, if a different state is chosen than the target state, update the 'last_state' accordingly so that CPUidle state accounting is coorect. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1120494064d5..b0bee34c5107 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "pm.h" @@ -124,11 +125,15 @@ return_sleep_time: static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { + struct cpuidle_state *new_state = state; + if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { - if (dev->safe_state) - return dev->safe_state->enter(dev, dev->safe_state); + BUG_ON(!dev->safe_state); + new_state = dev->safe_state; } - return omap3_enter_idle(dev, state); + + dev->last_state = new_state; + return omap3_enter_idle(dev, new_state); } DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); @@ -163,7 +168,8 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C2].threshold = 300; omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; /* C3 . MPU OFF + Core active */ omap3_power_states[OMAP3_STATE_C3].valid = 1; @@ -173,7 +179,8 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C3].threshold = 4000; omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID; + omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; /* C4 . MPU CSWR + Core CSWR*/ omap3_power_states[OMAP3_STATE_C4].valid = 1; @@ -198,7 +205,7 @@ void omap_init_power_states(void) CPUIDLE_FLAG_CHECK_BM; /* C6 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C6].valid = 0; + omap3_power_states[OMAP3_STATE_C6].valid = 1; omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; omap3_power_states[OMAP3_STATE_C6].sleep_latency = 10000; omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 30000; -- cgit v1.2.3-58-ga151 From 0343371e22dcfec9291193ad3e771dbce3a93670 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Fri, 26 Sep 2008 11:04:20 +0300 Subject: OMAP3: PM: CPUidle: fix init sequencing Previously omap3_idle_init() was called in device_init, while omap_pm_init() is called at late_initcall. This causes the cpu idle driver to call omap_sram_idle before it is properly initialized. This patch fixes the issue by moving omap3_idle_init into omap3_pm_init. Signed-off-by: Kalle Jokiniemi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 8 ++++++-- arch/arm/mach-omap2/pm.h | 1 + arch/arm/mach-omap2/pm34xx.c | 3 +-- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index b0bee34c5107..ad3af11f8f6e 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -227,7 +227,7 @@ struct cpuidle_driver omap3_idle_driver = { * Registers the OMAP3 specific cpuidle driver with the cpuidle * framework with the valid set of states. */ -int omap3_idle_init(void) +int __init omap3_idle_init(void) { int i, count = 0; struct omap3_processor_cx *cx; @@ -272,5 +272,9 @@ int omap3_idle_init(void) return 0; } -device_initcall(omap3_idle_init); +#else +int __init omap3_idle_init(void) +{ + return 0; +} #endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 379e35034ccc..0bf345db7147 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -21,6 +21,7 @@ extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap3_can_sleep(void); extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +extern int omap3_idle_init(void); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 69c47edcc0f2..501b00100d59 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -1099,9 +1099,8 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ -#ifndef CONFIG_CPU_IDLE pm_idle = omap3_pm_idle; -#endif + omap3_idle_init(); pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm); /* -- cgit v1.2.3-58-ga151 From 06d8f065b3bac1673825be744d22742ad72f9c2a Mon Sep 17 00:00:00 2001 From: Peter 'p2' De Schrijver Date: Fri, 13 Mar 2009 18:19:16 +0200 Subject: OMAP3: PM: CPUidle: Add new lower-latency C1 state This patch introduces a new C state which allows MPU to go to WFI but keeps the core domain active. This offers a much better wakeup latency (3us vs 10s of us for the current C1) at the cost of a higher power consumption. Signed-off-by: Peter 'p2' De Schrijver Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 125 ++++++++++++++++++++++++-------------- 1 file changed, 81 insertions(+), 44 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index ad3af11f8f6e..c11377ddc189 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -25,8 +25,9 @@ #include #include -#include #include +#include +#include #include #include @@ -34,13 +35,14 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 +#define OMAP3_MAX_STATES 8 #define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */ -#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */ -#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */ -#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */ -#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */ +#define OMAP3_STATE_C2 2 /* C2 - MPU WFI + Core inactive */ +#define OMAP3_STATE_C3 3 /* C3 - MPU CSWR + Core inactive */ +#define OMAP3_STATE_C4 4 /* C4 - MPU OFF + Core iactive */ +#define OMAP3_STATE_C5 5 /* C5 - MPU RET + Core RET */ +#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core RET */ +#define OMAP3_STATE_C7 7 /* C7 - MPU OFF + Core OFF */ struct omap3_processor_cx { u8 valid; @@ -64,6 +66,20 @@ static int omap3_idle_bm_check(void) return 0; } +static int _cpuidle_allow_idle(struct powerdomain *pwrdm, + struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static int _cpuidle_deny_idle(struct powerdomain *pwrdm, + struct clockdomain *clkdm) +{ + omap2_clkdm_deny_idle(clkdm); + return 0; +} + /** * omap3_enter_idle - Programs OMAP3 to enter the specified state * @dev: cpuidle device @@ -100,9 +116,19 @@ static int omap3_enter_idle(struct cpuidle_device *dev, if (omap_irq_pending()) goto return_sleep_time; + if (cx->type == OMAP3_STATE_C1) { + pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); + pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); + } + /* Execute ARM wfi */ omap_sram_idle(); + if (cx->type == OMAP3_STATE_C1) { + pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); + pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); + } + return_sleep_time: getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); @@ -141,79 +167,90 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /* omap3_init_power_states - Initialises the OMAP3 specific C states. * * Below is the desciption of each C state. - * C1 . MPU WFI + Core active - * C2 . MPU CSWR + Core active - * C3 . MPU OFF + Core active - * C4 . MPU CSWR + Core CSWR - * C5 . MPU OFF + Core CSWR - * C6 . MPU OFF + Core OFF + * C1 . MPU WFI + Core active + * C2 . MPU WFI + Core inactive + * C3 . MPU CSWR + Core inactive + * C4 . MPU OFF + Core inactive + * C5 . MPU CSWR + Core CSWR + * C6 . MPU OFF + Core CSWR + * C7 . MPU OFF + Core OFF */ void omap_init_power_states(void) { /* C1 . MPU WFI + Core active */ omap3_power_states[OMAP3_STATE_C1].valid = 1; omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = 10; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 10; - omap3_power_states[OMAP3_STATE_C1].threshold = 30; + omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2; + omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2; + omap3_power_states[OMAP3_STATE_C1].threshold = 5; omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; - /* C2 . MPU CSWR + Core active */ + /* C2 . MPU WFI + Core inactive */ omap3_power_states[OMAP3_STATE_C2].valid = 1; omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = 50; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 50; - omap3_power_states[OMAP3_STATE_C2].threshold = 300; - omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10; + omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10; + omap3_power_states[OMAP3_STATE_C2].threshold = 30; + omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; - /* C3 . MPU OFF + Core active */ + /* C3 . MPU CSWR + Core inactive */ omap3_power_states[OMAP3_STATE_C3].valid = 1; omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = 1500; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 1800; - omap3_power_states[OMAP3_STATE_C3].threshold = 4000; - omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50; + omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50; + omap3_power_states[OMAP3_STATE_C3].threshold = 300; + omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; - /* C4 . MPU CSWR + Core CSWR*/ + /* C4 . MPU OFF + Core inactive */ omap3_power_states[OMAP3_STATE_C4].valid = 1; omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = 2500; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 7500; - omap3_power_states[OMAP3_STATE_C4].threshold = 12000; - omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500; + omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800; + omap3_power_states[OMAP3_STATE_C4].threshold = 4000; + omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; - /* C5 . MPU OFF + Core CSWR */ + /* C5 . MPU CSWR + Core CSWR*/ omap3_power_states[OMAP3_STATE_C5].valid = 1; omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = 3000; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 8500; - omap3_power_states[OMAP3_STATE_C5].threshold = 15000; - omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500; + omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500; + omap3_power_states[OMAP3_STATE_C5].threshold = 12000; + omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; - /* C6 . MPU OFF + Core OFF */ + /* C6 . MPU OFF + Core CSWR */ omap3_power_states[OMAP3_STATE_C6].valid = 1; omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = 10000; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 30000; - omap3_power_states[OMAP3_STATE_C6].threshold = 300000; + omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000; + omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500; + omap3_power_states[OMAP3_STATE_C6].threshold = 15000; omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_CHECK_BM; + + /* C7 . MPU OFF + Core OFF */ + omap3_power_states[OMAP3_STATE_C7].valid = 1; + omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; + omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000; + omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000; + omap3_power_states[OMAP3_STATE_C7].threshold = 300000; + omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; } struct cpuidle_driver omap3_idle_driver = { -- cgit v1.2.3-58-ga151 From 8e431edb60ef175e6aa986e8260b23cc267a13fb Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Fri, 13 Mar 2009 21:34:25 +0530 Subject: OMAP3: PM: CPUidle: Start C-state definitions from base 0 The current definition of C-states starts from base 1. Whereas, the cpuidle driver uses base 0. This patch eliminates need for explicit mapping (add/ sbutract) due to different base values. Signed-off-by: Sanjeev Premi Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index c11377ddc189..5128b8c26b09 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -35,14 +35,14 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 8 -#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 2 /* C2 - MPU WFI + Core inactive */ -#define OMAP3_STATE_C3 3 /* C3 - MPU CSWR + Core inactive */ -#define OMAP3_STATE_C4 4 /* C4 - MPU OFF + Core iactive */ -#define OMAP3_STATE_C5 5 /* C5 - MPU RET + Core RET */ -#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core RET */ -#define OMAP3_STATE_C7 7 /* C7 - MPU OFF + Core OFF */ +#define OMAP3_MAX_STATES 7 +#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ +#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ +#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ +#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ +#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ +#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ +#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ struct omap3_processor_cx { u8 valid; @@ -279,7 +279,7 @@ int __init omap3_idle_init(void) dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = 1; i < OMAP3_MAX_STATES; i++) { + for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { cx = &omap3_power_states[i]; state = &dev->states[count]; -- cgit v1.2.3-58-ga151 From 7139178e9baf44dab454b757ed91a9ee149ad0f2 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Tue, 28 Oct 2008 10:59:05 +0200 Subject: OMAP3: PM: Use pwrdm_set_next_pwrst instead of set_pwrdm_state in idle loop It is more efficient to use pwrdm_set_next_pwrst for mpu, core and neon instead of set_pwrdm_state in idle loop. It is anyway known that those are active in idle loop. So no need to use set_pwrdm_state. Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 4 ++-- arch/arm/mach-omap2/pm34xx.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 5128b8c26b09..1d10c4aa9352 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -110,8 +110,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, core_state = PWRDM_POWER_RET; } - set_pwrdm_state(mpu_pd, mpu_state); - set_pwrdm_state(core_pd, core_state); + pwrdm_set_next_pwrst(mpu_pd, mpu_state); + pwrdm_set_next_pwrst(core_pd, core_state); if (omap_irq_pending()) goto return_sleep_time; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 501b00100d59..c77f6db8a63d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -359,7 +359,7 @@ void omap_sram_idle(void) /* NEON control */ if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) - set_pwrdm_state(neon_pwrdm, mpu_next_state); + pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state); /* PER */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); -- cgit v1.2.3-58-ga151 From da869621c3cd93d5a8361f243b50e5d48d12bd14 Mon Sep 17 00:00:00 2001 From: Peter 'p2' De Schrijver Date: Tue, 10 Mar 2009 18:05:19 +0200 Subject: OMAP3: PM: idle: Remove fclk check for idle loop This patch removes the check to see if some functional clocks are still enabled before entering sleep. This is no longer needed when using safe state (C1) that keeps CORE active. Signed-off-by: Peter 'p2' De Schrijver Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 42 ------------------------------------------ 1 file changed, 42 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c77f6db8a63d..4e87b61ca040 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -461,54 +461,12 @@ void omap_sram_idle(void) omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -/* - * Check if functional clocks are enabled before entering - * sleep. This function could be behind CONFIG_PM_DEBUG - * when all drivers are configuring their sysconfig registers - * properly and using their clocks properly. - */ -static int omap3_fclks_active(void) -{ - u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, - fck_cam = 0, fck_per = 0, fck_usbhost = 0; - - fck_core1 = cm_read_mod_reg(CORE_MOD, - CM_FCLKEN1); - if (omap_rev() > OMAP3430_REV_ES1_0) { - fck_core3 = cm_read_mod_reg(CORE_MOD, - OMAP3430ES2_CM_FCLKEN3); - fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, - CM_FCLKEN); - fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - } else - fck_sgx = cm_read_mod_reg(GFX_MOD, - OMAP3430ES2_CM_FCLKEN3); - fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, - CM_FCLKEN); - fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, - CM_FCLKEN); - fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, - CM_FCLKEN); - - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); - fck_per &= ~OMAP3430_EN_UART3; - - if (fck_core1 | fck_core3 | fck_sgx | fck_dss | - fck_cam | fck_per | fck_usbhost) - return 1; - return 0; -} - int omap3_can_sleep(void) { if (!sleep_while_idle) return 0; if (!omap_uart_can_sleep()) return 0; - if (omap3_fclks_active()) - return 0; return 1; } -- cgit v1.2.3-58-ga151 From cf22854cee10e16e28b1dde136c37e82b7d503ee Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 20 Mar 2009 15:21:02 +0200 Subject: OMAP3: PM: Added resched check into idle calls Fixes a bug where scheduling is delayed until next wakeup due to race condition (e.g. interrupt requests scheduling just before omap_sram_idle is entered.) Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cpuidle34xx.c | 3 ++- arch/arm/mach-omap2/pm34xx.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1d10c4aa9352..a26d6a08ae3f 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -22,6 +22,7 @@ * published by the Free Software Foundation. */ +#include #include #include @@ -113,7 +114,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, pwrdm_set_next_pwrst(mpu_pd, mpu_state); pwrdm_set_next_pwrst(core_pd, core_state); - if (omap_irq_pending()) + if (omap_irq_pending() || need_resched()) goto return_sleep_time; if (cx->type == OMAP3_STATE_C1) { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 4e87b61ca040..81ed252a0f8a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -523,7 +523,7 @@ static void omap3_pm_idle(void) if (!omap3_can_sleep()) goto out; - if (omap_irq_pending()) + if (omap_irq_pending() || need_resched()) goto out; omap_sram_idle(); -- cgit v1.2.3-58-ga151 From 3066eec68d21cf4d468809c0b7b1fe9ee59c8f32 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 22 Oct 2009 13:26:45 +0300 Subject: MFD: twl4030: add twl4030_codec MFD as a new child to the core New MFD child to twl4030 MFD device. Reason for the twl4030_codec MFD: the vibra control is actually in the codec part of the twl4030. If both the vibra and the audio functionality is needed from the twl4030 at the same time, than they need to control the codec power and APLL at the same time without breaking the other driver. Also these two has to be able to work without the need for the other driver. This MFD device will be used by the drivers, which needs resources from the twl4030 codec like audio and vibra. The platform specific configuration data is passed along to the child drivers (audio, vibra). Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz Signed-off-by: Mark Brown --- drivers/mfd/Kconfig | 6 + drivers/mfd/Makefile | 1 + drivers/mfd/twl4030-codec.c | 241 +++++++++++++++++++++++++++++++++ drivers/mfd/twl4030-core.c | 14 ++ include/linux/i2c/twl4030.h | 18 +++ include/linux/mfd/twl4030-codec.h | 271 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 551 insertions(+) create mode 100644 drivers/mfd/twl4030-codec.c create mode 100644 include/linux/mfd/twl4030-codec.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 570be139f9df..08f2d07bf56a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -121,6 +121,12 @@ config TWL4030_POWER and load scripts controling which resources are switched off/on or reset when a sleep, wakeup or warm reset event occurs. +config TWL4030_CODEC + bool + depends on TWL4030_CORE + select MFD_CORE + default n + config MFD_TMIO bool default n diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f3b277b90d40..af0fc903cec8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o +obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o obj-$(CONFIG_MFD_MC13783) += mc13783-core.o diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c new file mode 100644 index 000000000000..97103078dc2a --- /dev/null +++ b/drivers/mfd/twl4030-codec.c @@ -0,0 +1,241 @@ +/* + * MFD driver for twl4030 codec submodule + * + * Author: Peter Ujfalusi + * + * Copyright: (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define TWL4030_CODEC_CELLS 2 + +static struct platform_device *twl4030_codec_dev; + +struct twl4030_codec_resource { + int request_count; + u8 reg; + u8 mask; +}; + +struct twl4030_codec { + struct mutex mutex; + struct twl4030_codec_resource resource[TWL4030_CODEC_RES_MAX]; + struct mfd_cell cells[TWL4030_CODEC_CELLS]; +}; + +/* + * Modify the resource, the function returns the content of the register + * after the modification. + */ +static int twl4030_codec_set_resource(enum twl4030_codec_res id, int enable) +{ + struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + u8 val; + + twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, + codec->resource[id].reg); + + if (enable) + val |= codec->resource[id].mask; + else + val &= ~codec->resource[id].mask; + + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + val, codec->resource[id].reg); + + return val; +} + +static inline int twl4030_codec_get_resource(enum twl4030_codec_res id) +{ + struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + u8 val; + + twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, + codec->resource[id].reg); + + return val; +} + +/* + * Enable the resource. + * The function returns with error or the content of the register + */ +int twl4030_codec_enable_resource(enum twl4030_codec_res id) +{ + struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + int val; + + if (id >= TWL4030_CODEC_RES_MAX) { + dev_err(&twl4030_codec_dev->dev, + "Invalid resource ID (%u)\n", id); + return -EINVAL; + } + + mutex_lock(&codec->mutex); + if (!codec->resource[id].request_count) + /* Resource was disabled, enable it */ + val = twl4030_codec_set_resource(id, 1); + else + val = twl4030_codec_get_resource(id); + + codec->resource[id].request_count++; + mutex_unlock(&codec->mutex); + + return val; +} +EXPORT_SYMBOL_GPL(twl4030_codec_enable_resource); + +/* + * Disable the resource. + * The function returns with error or the content of the register + */ +int twl4030_codec_disable_resource(unsigned id) +{ + struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + int val; + + if (id >= TWL4030_CODEC_RES_MAX) { + dev_err(&twl4030_codec_dev->dev, + "Invalid resource ID (%u)\n", id); + return -EINVAL; + } + + mutex_lock(&codec->mutex); + if (!codec->resource[id].request_count) { + dev_err(&twl4030_codec_dev->dev, + "Resource has been disabled already (%u)\n", id); + mutex_unlock(&codec->mutex); + return -EPERM; + } + codec->resource[id].request_count--; + + if (!codec->resource[id].request_count) + /* Resource can be disabled now */ + val = twl4030_codec_set_resource(id, 0); + else + val = twl4030_codec_get_resource(id); + + mutex_unlock(&codec->mutex); + + return val; +} +EXPORT_SYMBOL_GPL(twl4030_codec_disable_resource); + +static int __devinit twl4030_codec_probe(struct platform_device *pdev) +{ + struct twl4030_codec *codec; + struct twl4030_codec_data *pdata = pdev->dev.platform_data; + struct mfd_cell *cell = NULL; + int ret, childs = 0; + + codec = kzalloc(sizeof(struct twl4030_codec), GFP_KERNEL); + if (!codec) + return -ENOMEM; + + platform_set_drvdata(pdev, codec); + + twl4030_codec_dev = pdev; + mutex_init(&codec->mutex); + + /* Codec power */ + codec->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE; + codec->resource[TWL4030_CODEC_RES_POWER].mask = TWL4030_CODECPDZ; + + /* PLL */ + codec->resource[TWL4030_CODEC_RES_APLL].reg = TWL4030_REG_APLL_CTL; + codec->resource[TWL4030_CODEC_RES_APLL].mask = TWL4030_APLL_EN; + + if (pdata->audio) { + cell = &codec->cells[childs]; + cell->name = "twl4030_codec_audio"; + cell->platform_data = pdata->audio; + cell->data_size = sizeof(*pdata->audio); + childs++; + } + if (pdata->vibra) { + cell = &codec->cells[childs]; + cell->name = "twl4030_codec_vibra"; + cell->platform_data = pdata->vibra; + cell->data_size = sizeof(*pdata->vibra); + childs++; + } + + if (childs) + ret = mfd_add_devices(&pdev->dev, pdev->id, codec->cells, + childs, NULL, 0); + else { + dev_err(&pdev->dev, "No platform data found for childs\n"); + ret = -ENODEV; + } + + if (!ret) + return 0; + + platform_set_drvdata(pdev, NULL); + kfree(codec); + twl4030_codec_dev = NULL; + return ret; +} + +static int __devexit twl4030_codec_remove(struct platform_device *pdev) +{ + struct twl4030_codec *codec = platform_get_drvdata(pdev); + + mfd_remove_devices(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(codec); + twl4030_codec_dev = NULL; + + return 0; +} + +MODULE_ALIAS("platform:twl4030_codec"); + +static struct platform_driver twl4030_codec_driver = { + .probe = twl4030_codec_probe, + .remove = __devexit_p(twl4030_codec_remove), + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_codec", + }, +}; + +static int __devinit twl4030_codec_init(void) +{ + return platform_driver_register(&twl4030_codec_driver); +} +module_init(twl4030_codec_init); + +static void __devexit twl4030_codec_exit(void) +{ + platform_driver_unregister(&twl4030_codec_driver); +} +module_exit(twl4030_codec_exit); + +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_LICENSE("GPL"); + diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index 6cb12502e306..cf462b90dee2 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -114,6 +114,12 @@ #define twl_has_watchdog() false #endif +#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) +#define twl_has_codec() true +#else +#define twl_has_codec() false +#endif + /* Triton Core internal information (BEGIN) */ /* Last - for index max*/ @@ -601,6 +607,14 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } + if (twl_has_codec() && pdata->codec) { + child = add_child(1, "twl4030_codec", + pdata->codec, sizeof(*pdata->codec), + false, 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + if (twl_has_regulator()) { /* child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 508824ee35e6..ba61add3e05a 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -401,6 +401,23 @@ struct twl4030_power_data { extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); +struct twl4030_codec_audio_data { + unsigned int audio_mclk; + unsigned int ramp_delay_value; + unsigned int hs_extmute:1; + void (*set_hs_extmute)(int mute); +}; + +struct twl4030_codec_vibra_data { + unsigned int audio_mclk; + unsigned int coexist; +}; + +struct twl4030_codec_data { + struct twl4030_codec_audio_data *audio; + struct twl4030_codec_vibra_data *vibra; +}; + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_bci_platform_data *bci; @@ -409,6 +426,7 @@ struct twl4030_platform_data { struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; struct twl4030_power_data *power; + struct twl4030_codec_data *codec; /* LDO regulators */ struct regulator_init_data *vdac; diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h new file mode 100644 index 000000000000..ef0a3041d759 --- /dev/null +++ b/include/linux/mfd/twl4030-codec.h @@ -0,0 +1,271 @@ +/* + * MFD driver for twl4030 codec submodule + * + * Author: Peter Ujfalusi + * + * Copyright: (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TWL4030_CODEC_H__ +#define __TWL4030_CODEC_H__ + +/* Codec registers */ +#define TWL4030_REG_CODEC_MODE 0x01 +#define TWL4030_REG_OPTION 0x02 +#define TWL4030_REG_UNKNOWN 0x03 +#define TWL4030_REG_MICBIAS_CTL 0x04 +#define TWL4030_REG_ANAMICL 0x05 +#define TWL4030_REG_ANAMICR 0x06 +#define TWL4030_REG_AVADC_CTL 0x07 +#define TWL4030_REG_ADCMICSEL 0x08 +#define TWL4030_REG_DIGMIXING 0x09 +#define TWL4030_REG_ATXL1PGA 0x0A +#define TWL4030_REG_ATXR1PGA 0x0B +#define TWL4030_REG_AVTXL2PGA 0x0C +#define TWL4030_REG_AVTXR2PGA 0x0D +#define TWL4030_REG_AUDIO_IF 0x0E +#define TWL4030_REG_VOICE_IF 0x0F +#define TWL4030_REG_ARXR1PGA 0x10 +#define TWL4030_REG_ARXL1PGA 0x11 +#define TWL4030_REG_ARXR2PGA 0x12 +#define TWL4030_REG_ARXL2PGA 0x13 +#define TWL4030_REG_VRXPGA 0x14 +#define TWL4030_REG_VSTPGA 0x15 +#define TWL4030_REG_VRX2ARXPGA 0x16 +#define TWL4030_REG_AVDAC_CTL 0x17 +#define TWL4030_REG_ARX2VTXPGA 0x18 +#define TWL4030_REG_ARXL1_APGA_CTL 0x19 +#define TWL4030_REG_ARXR1_APGA_CTL 0x1A +#define TWL4030_REG_ARXL2_APGA_CTL 0x1B +#define TWL4030_REG_ARXR2_APGA_CTL 0x1C +#define TWL4030_REG_ATX2ARXPGA 0x1D +#define TWL4030_REG_BT_IF 0x1E +#define TWL4030_REG_BTPGA 0x1F +#define TWL4030_REG_BTSTPGA 0x20 +#define TWL4030_REG_EAR_CTL 0x21 +#define TWL4030_REG_HS_SEL 0x22 +#define TWL4030_REG_HS_GAIN_SET 0x23 +#define TWL4030_REG_HS_POPN_SET 0x24 +#define TWL4030_REG_PREDL_CTL 0x25 +#define TWL4030_REG_PREDR_CTL 0x26 +#define TWL4030_REG_PRECKL_CTL 0x27 +#define TWL4030_REG_PRECKR_CTL 0x28 +#define TWL4030_REG_HFL_CTL 0x29 +#define TWL4030_REG_HFR_CTL 0x2A +#define TWL4030_REG_ALC_CTL 0x2B +#define TWL4030_REG_ALC_SET1 0x2C +#define TWL4030_REG_ALC_SET2 0x2D +#define TWL4030_REG_BOOST_CTL 0x2E +#define TWL4030_REG_SOFTVOL_CTL 0x2F +#define TWL4030_REG_DTMF_FREQSEL 0x30 +#define TWL4030_REG_DTMF_TONEXT1H 0x31 +#define TWL4030_REG_DTMF_TONEXT1L 0x32 +#define TWL4030_REG_DTMF_TONEXT2H 0x33 +#define TWL4030_REG_DTMF_TONEXT2L 0x34 +#define TWL4030_REG_DTMF_TONOFF 0x35 +#define TWL4030_REG_DTMF_WANONOFF 0x36 +#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 +#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 +#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 +#define TWL4030_REG_APLL_CTL 0x3A +#define TWL4030_REG_DTMF_CTL 0x3B +#define TWL4030_REG_DTMF_PGA_CTL2 0x3C +#define TWL4030_REG_DTMF_PGA_CTL1 0x3D +#define TWL4030_REG_MISC_SET_1 0x3E +#define TWL4030_REG_PCMBTMUX 0x3F +#define TWL4030_REG_RX_PATH_SEL 0x43 +#define TWL4030_REG_VDL_APGA_CTL 0x44 +#define TWL4030_REG_VIBRA_CTL 0x45 +#define TWL4030_REG_VIBRA_SET 0x46 +#define TWL4030_REG_VIBRA_PWM_SET 0x47 +#define TWL4030_REG_ANAMIC_GAIN 0x48 +#define TWL4030_REG_MISC_SET_2 0x49 + +/* Bitfield Definitions */ + +/* TWL4030_CODEC_MODE (0x01) Fields */ +#define TWL4030_APLL_RATE 0xF0 +#define TWL4030_APLL_RATE_8000 0x00 +#define TWL4030_APLL_RATE_11025 0x10 +#define TWL4030_APLL_RATE_12000 0x20 +#define TWL4030_APLL_RATE_16000 0x40 +#define TWL4030_APLL_RATE_22050 0x50 +#define TWL4030_APLL_RATE_24000 0x60 +#define TWL4030_APLL_RATE_32000 0x80 +#define TWL4030_APLL_RATE_44100 0x90 +#define TWL4030_APLL_RATE_48000 0xA0 +#define TWL4030_APLL_RATE_96000 0xE0 +#define TWL4030_SEL_16K 0x08 +#define TWL4030_CODECPDZ 0x02 +#define TWL4030_OPT_MODE 0x01 +#define TWL4030_OPTION_1 (1 << 0) +#define TWL4030_OPTION_2 (0 << 0) + +/* TWL4030_OPTION (0x02) Fields */ +#define TWL4030_ATXL1_EN (1 << 0) +#define TWL4030_ATXR1_EN (1 << 1) +#define TWL4030_ATXL2_VTXL_EN (1 << 2) +#define TWL4030_ATXR2_VTXR_EN (1 << 3) +#define TWL4030_ARXL1_VRX_EN (1 << 4) +#define TWL4030_ARXR1_EN (1 << 5) +#define TWL4030_ARXL2_EN (1 << 6) +#define TWL4030_ARXR2_EN (1 << 7) + +/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */ +#define TWL4030_MICBIAS2_CTL 0x40 +#define TWL4030_MICBIAS1_CTL 0x20 +#define TWL4030_HSMICBIAS_EN 0x04 +#define TWL4030_MICBIAS2_EN 0x02 +#define TWL4030_MICBIAS1_EN 0x01 + +/* ANAMICL (0x05) Fields */ +#define TWL4030_CNCL_OFFSET_START 0x80 +#define TWL4030_OFFSET_CNCL_SEL 0x60 +#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00 +#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20 +#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40 +#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60 +#define TWL4030_MICAMPL_EN 0x10 +#define TWL4030_CKMIC_EN 0x08 +#define TWL4030_AUXL_EN 0x04 +#define TWL4030_HSMIC_EN 0x02 +#define TWL4030_MAINMIC_EN 0x01 + +/* ANAMICR (0x06) Fields */ +#define TWL4030_MICAMPR_EN 0x10 +#define TWL4030_AUXR_EN 0x04 +#define TWL4030_SUBMIC_EN 0x01 + +/* AVADC_CTL (0x07) Fields */ +#define TWL4030_ADCL_EN 0x08 +#define TWL4030_AVADC_CLK_PRIORITY 0x04 +#define TWL4030_ADCR_EN 0x02 + +/* TWL4030_REG_ADCMICSEL (0x08) Fields */ +#define TWL4030_DIGMIC1_EN 0x08 +#define TWL4030_TX2IN_SEL 0x04 +#define TWL4030_DIGMIC0_EN 0x02 +#define TWL4030_TX1IN_SEL 0x01 + +/* AUDIO_IF (0x0E) Fields */ +#define TWL4030_AIF_SLAVE_EN 0x80 +#define TWL4030_DATA_WIDTH 0x60 +#define TWL4030_DATA_WIDTH_16S_16W 0x00 +#define TWL4030_DATA_WIDTH_32S_16W 0x40 +#define TWL4030_DATA_WIDTH_32S_24W 0x60 +#define TWL4030_AIF_FORMAT 0x18 +#define TWL4030_AIF_FORMAT_CODEC 0x00 +#define TWL4030_AIF_FORMAT_LEFT 0x08 +#define TWL4030_AIF_FORMAT_RIGHT 0x10 +#define TWL4030_AIF_FORMAT_TDM 0x18 +#define TWL4030_AIF_TRI_EN 0x04 +#define TWL4030_CLK256FS_EN 0x02 +#define TWL4030_AIF_EN 0x01 + +/* VOICE_IF (0x0F) Fields */ +#define TWL4030_VIF_SLAVE_EN 0x80 +#define TWL4030_VIF_DIN_EN 0x40 +#define TWL4030_VIF_DOUT_EN 0x20 +#define TWL4030_VIF_SWAP 0x10 +#define TWL4030_VIF_FORMAT 0x08 +#define TWL4030_VIF_TRI_EN 0x04 +#define TWL4030_VIF_SUB_EN 0x02 +#define TWL4030_VIF_EN 0x01 + +/* EAR_CTL (0x21) */ +#define TWL4030_EAR_GAIN 0x30 + +/* HS_GAIN_SET (0x23) Fields */ +#define TWL4030_HSR_GAIN 0x0C +#define TWL4030_HSR_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSR_GAIN_PLUS_6DB 0x04 +#define TWL4030_HSR_GAIN_0DB 0x08 +#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C +#define TWL4030_HSL_GAIN 0x03 +#define TWL4030_HSL_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSL_GAIN_PLUS_6DB 0x01 +#define TWL4030_HSL_GAIN_0DB 0x02 +#define TWL4030_HSL_GAIN_MINUS_6DB 0x03 + +/* HS_POPN_SET (0x24) Fields */ +#define TWL4030_VMID_EN 0x40 +#define TWL4030_EXTMUTE 0x20 +#define TWL4030_RAMP_DELAY 0x1C +#define TWL4030_RAMP_DELAY_20MS 0x00 +#define TWL4030_RAMP_DELAY_40MS 0x04 +#define TWL4030_RAMP_DELAY_81MS 0x08 +#define TWL4030_RAMP_DELAY_161MS 0x0C +#define TWL4030_RAMP_DELAY_323MS 0x10 +#define TWL4030_RAMP_DELAY_645MS 0x14 +#define TWL4030_RAMP_DELAY_1291MS 0x18 +#define TWL4030_RAMP_DELAY_2581MS 0x1C +#define TWL4030_RAMP_EN 0x02 + +/* PREDL_CTL (0x25) */ +#define TWL4030_PREDL_GAIN 0x30 + +/* PREDR_CTL (0x26) */ +#define TWL4030_PREDR_GAIN 0x30 + +/* PRECKL_CTL (0x27) */ +#define TWL4030_PRECKL_GAIN 0x30 + +/* PRECKR_CTL (0x28) */ +#define TWL4030_PRECKR_GAIN 0x30 + +/* HFL_CTL (0x29, 0x2A) Fields */ +#define TWL4030_HF_CTL_HB_EN 0x04 +#define TWL4030_HF_CTL_LOOP_EN 0x08 +#define TWL4030_HF_CTL_RAMP_EN 0x10 +#define TWL4030_HF_CTL_REF_EN 0x20 + +/* APLL_CTL (0x3A) Fields */ +#define TWL4030_APLL_EN 0x10 +#define TWL4030_APLL_INFREQ 0x0F +#define TWL4030_APLL_INFREQ_19200KHZ 0x05 +#define TWL4030_APLL_INFREQ_26000KHZ 0x06 +#define TWL4030_APLL_INFREQ_38400KHZ 0x0F + +/* REG_MISC_SET_1 (0x3E) Fields */ +#define TWL4030_CLK64_EN 0x80 +#define TWL4030_SCRAMBLE_EN 0x40 +#define TWL4030_FMLOOP_EN 0x20 +#define TWL4030_SMOOTH_ANAVOL_EN 0x02 +#define TWL4030_DIGMIC_LR_SWAP_EN 0x01 + +/* VIBRA_CTL (0x45) */ +#define TWL4030_VIBRA_EN 0x01 +#define TWL4030_VIBRA_DIR 0x02 +#define TWL4030_VIBRA_AUDIO_SEL_L1 (0x00 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R1 (0x01 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_L2 (0x02 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R2 (0x03 << 2) +#define TWL4030_VIBRA_SEL 0x10 +#define TWL4030_VIBRA_DIR_SEL 0x20 + +/* TWL4030 codec resource IDs */ +enum twl4030_codec_res { + TWL4030_CODEC_RES_POWER = 0, + TWL4030_CODEC_RES_APLL, + TWL4030_CODEC_RES_MAX, +}; + +int twl4030_codec_disable_resource(enum twl4030_codec_res id); +int twl4030_codec_enable_resource(enum twl4030_codec_res id); + +#endif /* End of __TWL4030_CODEC_H__ */ -- cgit v1.2.3-58-ga151 From e86fa0b4a3fe0563e492db4c5a52fd37219a4c70 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 22 Oct 2009 13:26:46 +0300 Subject: OMAP: Platform support for twl4030_codec MFD Add needed platform data for the twl4030_codec MFD on boards, where the audio part of the twl4030 codec is used. Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/mach-omap2/board-3430sdp.c | 9 +++++++++ arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++++++ arch/arm/mach-omap2/board-omap3evm.c | 9 +++++++++ arch/arm/mach-omap2/board-omap3pandora.c | 9 +++++++++ arch/arm/mach-omap2/board-overo.c | 9 +++++++++ arch/arm/mach-omap2/board-zoom2.c | 9 +++++++++ 6 files changed, 54 insertions(+) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a2abac98c569..7c1bbe255b8f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -410,6 +410,14 @@ static struct regulator_init_data sdp3430_vpll2 = { .consumer_supplies = &sdp3430_vdvi_supply, }; +static struct twl4030_codec_audio_data sdp3430_audio = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data sdp3430_codec = { + .audio = &sdp3430_audio, +}; + static struct twl4030_platform_data sdp3430_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -420,6 +428,7 @@ static struct twl4030_platform_data sdp3430_twldata = { .madc = &sdp3430_madc_data, .keypad = &sdp3430_kp_data, .usb = &sdp3430_usb_data, + .codec = &sdp3430_codec, .vaux1 = &sdp3430_vaux1, .vaux2 = &sdp3430_vaux2, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 76c727ed8da5..23bfd333066f 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -254,6 +254,14 @@ static struct twl4030_usb_data beagle_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static struct twl4030_codec_audio_data beagle_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data beagle_codec_data = { + .audio = &beagle_audio_data, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -261,6 +269,7 @@ static struct twl4030_platform_data beagle_twldata = { /* platform_data for children goes here */ .usb = &beagle_usb_data, .gpio = &beagle_gpio_data, + .codec = &beagle_codec_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, .vdac = &beagle_vdac, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 522ff6288c6f..4761c4f8f480 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -194,6 +194,14 @@ static struct twl4030_madc_platform_data omap3evm_madc_data = { .irq_line = 1, }; +static struct twl4030_codec_audio_data omap3evm_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data omap3evm_codec_data = { + .audio = &omap3evm_audio_data, +}; + static struct twl4030_platform_data omap3evm_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -203,6 +211,7 @@ static struct twl4030_platform_data omap3evm_twldata = { .madc = &omap3evm_madc_data, .usb = &omap3evm_usb_data, .gpio = &omap3evm_gpio_data, + .codec = &omap3evm_codec_data, }; static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7fb9023b4239..034e679b8408 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -281,11 +281,20 @@ static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static struct twl4030_codec_audio_data omap3pandora_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data omap3pandora_codec_data = { + .audio = &omap3pandora_audio_data, +}; + static struct twl4030_platform_data omap3pandora_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, .usb = &omap3pandora_usb_data, + .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, .keypad = &pandora_kp_data, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 461522c1bced..7303b4165e31 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -329,6 +329,14 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +static struct twl4030_codec_audio_data overo_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data overo_codec_data = { + .audio = &overo_audio_data, +}; + /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ static struct twl4030_platform_data overo_twldata = { @@ -336,6 +344,7 @@ static struct twl4030_platform_data overo_twldata = { .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, .usb = &overo_usb_data, + .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, }; diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index ea01a0fa07fb..a37bbb492ce9 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -230,6 +230,14 @@ static struct twl4030_madc_platform_data zoom2_madc_data = { .irq_line = 1, }; +static struct twl4030_codec_audio_data zoom2_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data zoom2_codec_data = { + .audio = &zoom2_audio_data, +}; + static struct twl4030_platform_data zoom2_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -240,6 +248,7 @@ static struct twl4030_platform_data zoom2_twldata = { .usb = &zoom2_usb_data, .gpio = &zoom2_gpio_data, .keypad = &zoom2_kp_twl4030_data, + .codec = &zoom2_codec_data, .vmmc1 = &zoom2_vmmc1, .vmmc2 = &zoom2_vmmc2, .vsim = &zoom2_vsim, -- cgit v1.2.3-58-ga151 From 26276069d2f51955cf549faab5d3a71a4b37ba23 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 4 Nov 2009 09:58:17 +0200 Subject: MFD: TWL4030: Add audio_mclk to the codec platform data Add audio_mclk to the platform data struct for the twl4030-codec MFD driver. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz Signed-off-by: Mark Brown --- include/linux/i2c/twl4030.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index ba61add3e05a..5306a759cbde 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -414,6 +414,7 @@ struct twl4030_codec_vibra_data { }; struct twl4030_codec_data { + unsigned int audio_mclk; struct twl4030_codec_audio_data *audio; struct twl4030_codec_vibra_data *vibra; }; -- cgit v1.2.3-58-ga151 From 6df74efbb8c38c4a057223be564323ff26d44fd3 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 4 Nov 2009 09:58:18 +0200 Subject: OMAP: Configure audio_mclk for twl4030-codec MFD audio_mclk value is going to be handled by the twl4030-codec MFD driver, configure the correct value for boards, which is using the twl4030 audio. Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/mach-omap2/board-3430sdp.c | 1 + arch/arm/mach-omap2/board-omap3beagle.c | 1 + arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/board-omap3pandora.c | 1 + arch/arm/mach-omap2/board-overo.c | 1 + arch/arm/mach-omap2/board-zoom2.c | 1 + 6 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7c1bbe255b8f..4f052982b7cc 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -415,6 +415,7 @@ static struct twl4030_codec_audio_data sdp3430_audio = { }; static struct twl4030_codec_data sdp3430_codec = { + .audio_mclk = 26000000, .audio = &sdp3430_audio, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 23bfd333066f..4e69f8ed30dc 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -259,6 +259,7 @@ static struct twl4030_codec_audio_data beagle_audio_data = { }; static struct twl4030_codec_data beagle_codec_data = { + .audio_mclk = 26000000, .audio = &beagle_audio_data, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4761c4f8f480..e0cac96a7860 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -199,6 +199,7 @@ static struct twl4030_codec_audio_data omap3evm_audio_data = { }; static struct twl4030_codec_data omap3evm_codec_data = { + .audio_mclk = 26000000, .audio = &omap3evm_audio_data, }; diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 034e679b8408..3b2e5463fc5d 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -286,6 +286,7 @@ static struct twl4030_codec_audio_data omap3pandora_audio_data = { }; static struct twl4030_codec_data omap3pandora_codec_data = { + .audio_mclk = 26000000, .audio = &omap3pandora_audio_data, }; diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 7303b4165e31..59d0dfa0eae8 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -334,6 +334,7 @@ static struct twl4030_codec_audio_data overo_audio_data = { }; static struct twl4030_codec_data overo_codec_data = { + .audio_mclk = 26000000, .audio = &overo_audio_data, }; diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index a37bbb492ce9..67abebc46feb 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -235,6 +235,7 @@ static struct twl4030_codec_audio_data zoom2_audio_data = { }; static struct twl4030_codec_data zoom2_codec_data = { + .audio_mclk = 26000000, .audio = &zoom2_audio_data, }; -- cgit v1.2.3-58-ga151 From cfaf6d2c1cb231f77e24109cb1460db429608bd4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 4 Nov 2009 09:58:19 +0200 Subject: MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver Configure the APLL_INFREQ field in the APLL_CTL register based on the platform data. Provide also a function for childs to query the audio_mclk frequency. Signed-off-by: Peter Ujfalusi Acked-by: Samuel Ortiz Signed-off-by: Mark Brown --- drivers/mfd/twl4030-codec.c | 35 +++++++++++++++++++++++++++++++++++ include/linux/mfd/twl4030-codec.h | 1 + 2 files changed, 36 insertions(+) diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c index 97103078dc2a..77b914907d7c 100644 --- a/drivers/mfd/twl4030-codec.c +++ b/drivers/mfd/twl4030-codec.c @@ -41,6 +41,7 @@ struct twl4030_codec_resource { }; struct twl4030_codec { + unsigned int audio_mclk; struct mutex mutex; struct twl4030_codec_resource resource[TWL4030_CODEC_RES_MAX]; struct mfd_cell cells[TWL4030_CODEC_CELLS]; @@ -145,12 +146,45 @@ int twl4030_codec_disable_resource(unsigned id) } EXPORT_SYMBOL_GPL(twl4030_codec_disable_resource); +unsigned int twl4030_codec_get_mclk(void) +{ + struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev); + + return codec->audio_mclk; +} +EXPORT_SYMBOL_GPL(twl4030_codec_get_mclk); + static int __devinit twl4030_codec_probe(struct platform_device *pdev) { struct twl4030_codec *codec; struct twl4030_codec_data *pdata = pdev->dev.platform_data; struct mfd_cell *cell = NULL; int ret, childs = 0; + u8 val; + + if (!pdata) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -EINVAL; + } + + /* Configure APLL_INFREQ and disable APLL if enabled */ + val = 0; + switch (pdata->audio_mclk) { + case 19200000: + val |= TWL4030_APLL_INFREQ_19200KHZ; + break; + case 26000000: + val |= TWL4030_APLL_INFREQ_26000KHZ; + break; + case 38400000: + val |= TWL4030_APLL_INFREQ_38400KHZ; + break; + default: + dev_err(&pdev->dev, "Invalid audio_mclk\n"); + return -EINVAL; + } + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + val, TWL4030_REG_APLL_CTL); codec = kzalloc(sizeof(struct twl4030_codec), GFP_KERNEL); if (!codec) @@ -160,6 +194,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev) twl4030_codec_dev = pdev; mutex_init(&codec->mutex); + codec->audio_mclk = pdata->audio_mclk; /* Codec power */ codec->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE; diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h index ef0a3041d759..2ec317c68e59 100644 --- a/include/linux/mfd/twl4030-codec.h +++ b/include/linux/mfd/twl4030-codec.h @@ -267,5 +267,6 @@ enum twl4030_codec_res { int twl4030_codec_disable_resource(enum twl4030_codec_res id); int twl4030_codec_enable_resource(enum twl4030_codec_res id); +unsigned int twl4030_codec_get_mclk(void); #endif /* End of __TWL4030_CODEC_H__ */ -- cgit v1.2.3-58-ga151 From 76b5c84f77c3abc92a3c4e185e7b78f17a0ed204 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 5 Nov 2009 22:59:46 -0800 Subject: Input: add new keycodes useful in mobile devices Add new codes for camera focus key, and camera lens cover, keypad slide, front proximity switches. Signed-off-by: Jani Nikula Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/input.h b/include/linux/input.h index c2b1a7d244d9..84b501ab0d8f 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -595,6 +595,8 @@ struct input_absinfo { #define KEY_NUMERIC_STAR 0x20a #define KEY_NUMERIC_POUND 0x20b +#define KEY_CAMERA_FOCUS 0x210 + /* We avoid low common keys in module aliases so they don't get huge. */ #define KEY_MIN_INTERESTING KEY_MUTE #define KEY_MAX 0x2ff @@ -677,6 +679,9 @@ struct input_absinfo { #define SW_LINEOUT_INSERT 0x06 /* set = inserted */ #define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ #define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ +#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ +#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ +#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) -- cgit v1.2.3-58-ga151 From f014ee320e8779c1798998f75bfc3cef2b46286f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 5 Nov 2009 22:59:47 -0800 Subject: ARM OMAP3: RX-51 board - add initialization of gpio keys Initialize some of the RX-51 input GPIO lines as gpio keys. Enable gpio keys as a module in rx51_defconfig. Signed-off-by: Jani Nikula Acked-by: Tony Lindgren Signed-off-by: Dmitry Torokhov --- arch/arm/configs/rx51_defconfig | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 82 ++++++++++++++++++++++++++++ 2 files changed, 83 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index e7e31332c62a..155973426025 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -784,7 +784,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index cf4583a5d284..fb5988c1a884 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -36,6 +37,86 @@ #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + +#define RX51_GPIO_CAMERA_LENS_COVER 110 +#define RX51_GPIO_CAMERA_FOCUS 68 +#define RX51_GPIO_CAMERA_CAPTURE 69 +#define RX51_GPIO_KEYPAD_SLIDE 71 +#define RX51_GPIO_LOCK_BUTTON 113 +#define RX51_GPIO_PROXIMITY 89 + +#define RX51_GPIO_DEBOUNCE_TIMEOUT 10 + +static struct gpio_keys_button rx51_gpio_keys[] = { + { + .desc = "Camera Lens Cover", + .type = EV_SW, + .code = SW_CAMERA_LENS_COVER, + .gpio = RX51_GPIO_CAMERA_LENS_COVER, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Camera Focus", + .type = EV_KEY, + .code = KEY_CAMERA_FOCUS, + .gpio = RX51_GPIO_CAMERA_FOCUS, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Camera Capture", + .type = EV_KEY, + .code = KEY_CAMERA, + .gpio = RX51_GPIO_CAMERA_CAPTURE, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Lock Button", + .type = EV_KEY, + .code = KEY_SCREENLOCK, + .gpio = RX51_GPIO_LOCK_BUTTON, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Keypad Slide", + .type = EV_SW, + .code = SW_KEYPAD_SLIDE, + .gpio = RX51_GPIO_KEYPAD_SLIDE, + .active_low = 1, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + }, { + .desc = "Proximity Sensor", + .type = EV_SW, + .code = SW_FRONT_PROXIMITY, + .gpio = RX51_GPIO_PROXIMITY, + .active_low = 0, + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, + } +}; + +static struct gpio_keys_platform_data rx51_gpio_keys_data = { + .buttons = rx51_gpio_keys, + .nbuttons = ARRAY_SIZE(rx51_gpio_keys), +}; + +static struct platform_device rx51_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &rx51_gpio_keys_data, + }, +}; + +static void __init rx51_add_gpio_keys(void) +{ + platform_device_register(&rx51_gpio_keys_device); +} +#else +static void __init rx51_add_gpio_keys(void) +{ +} +#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ + static int board_keymap[] = { KEY(0, 0, KEY_Q), KEY(0, 1, KEY_O), @@ -541,5 +622,6 @@ void __init rx51_peripherals_init(void) rx51_i2c_init(); board_onenand_init(); board_smc91x_init(); + rx51_add_gpio_keys(); } -- cgit v1.2.3-58-ga151 From 9d30b99f352a7f21f93f0f3e2f0eecf8aa7847c1 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Sun, 22 Nov 2009 10:10:47 -0800 Subject: omap: Eliminate OMAP_MAX_NR_PORTS Eliminate OMAP_MAX_NR_PORTS Note that also the null terminator entry for omap1 serial_platform_data needs to be now removed to avoid oopsing. Note that mach-omap1 uses struct plat_serial8250_port array, which requires a null terminator at the end, and that's why we need to use ARRAY_SIZE - 1. This is not needed on mach-omap2 as the array used is struct omap_uart_state, and does not use a null terminator. Signed-off-by: Alexander Shishkin Acked-by: Kevin Hilman Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/serial.c | 2 +- arch/arm/mach-omap2/serial.c | 6 +++--- arch/arm/plat-omap/include/plat/serial.h | 4 ---- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 5ebf0946c76a..6e5207c81cf4 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -120,7 +120,7 @@ void __init omap_serial_init(void) serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; } - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { /* Static mapping, never released */ serial_platform_data[i].membase = diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 72df1b188135..2e17b57f5b23 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -533,7 +533,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} #define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { +static struct omap_uart_state omap_uart[] = { { .pdev = { .name = "serial8250", @@ -583,7 +583,7 @@ void __init omap_serial_early_init(void) * if not needed. */ - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { struct omap_uart_state *uart = &omap_uart[i]; struct platform_device *pdev = &uart->pdev; struct device *dev = &pdev->dev; @@ -635,7 +635,7 @@ void __init omap_serial_init(void) { int i; - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { struct omap_uart_state *uart = &omap_uart[i]; struct platform_device *pdev = &uart->pdev; struct device *dev = &pdev->dev; diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index e249186d26e2..9951345a25d6 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -20,26 +20,22 @@ #define OMAP_UART1_BASE 0xfffb0000 #define OMAP_UART2_BASE 0xfffb0800 #define OMAP_UART3_BASE 0xfffb9800 -#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP2) /* OMAP2 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 -#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP3) /* OMAP3 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x49020000 -#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP4) /* OMAP4 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x48020000 #define OMAP_UART4_BASE 0x4806e000 -#define OMAP_MAX_NR_PORTS 4 #endif #define OMAP1510_BASE_BAUD (12000000/16) -- cgit v1.2.3-58-ga151 From d9f5007491e3b6693dd00487981676b6b3005d72 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:10:49 -0800 Subject: omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config Zoom2/Zoom3 kind of boards do not use omap uarts for console. These use external debug board for console. So these boards should not have "Uncompressing Kernel...." log put on omap uarts. By interoducing OMAP_LL_DEBUG_NONE option, unnecessary writes to omap uarts is avoided. In future, the DEBUG_LL interface will be enhanced to use external debug board. Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Kconfig | 5 ++++- arch/arm/plat-omap/include/plat/uncompress.h | 6 +++++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 64b3f52bd9b2..f348ddfb0492 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -165,7 +165,7 @@ config OMAP_DM_TIMER choice prompt "Low-level debug console UART" depends on ARCH_OMAP - default OMAP_LL_DEBUG_UART1 + default OMAP_LL_DEBUG_NONE config OMAP_LL_DEBUG_UART1 bool "UART1" @@ -176,6 +176,9 @@ config OMAP_LL_DEBUG_UART2 config OMAP_LL_DEBUG_UART3 bool "UART3" +config OMAP_LL_DEBUG_NONE + bool "None" + endchoice config OMAP_SERIAL_WAKE diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index e22f57564b59..13c305d62127 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -44,8 +44,12 @@ static void putc(int c) uart = (volatile u8 *)(OMAP_UART3_BASE); #elif defined(CONFIG_OMAP_LL_DEBUG_UART2) uart = (volatile u8 *)(OMAP_UART2_BASE); -#else +#elif defined(CONFIG_OMAP_LL_DEBUG_UART1) uart = (volatile u8 *)(OMAP_UART1_BASE); +#elif defined(CONFIG_OMAP_LL_DEBUG_NONE) + return; +#else + return; #endif #ifdef CONFIG_ARCH_OMAP1 -- cgit v1.2.3-58-ga151 From 490a56652295825e3006f8703d96da2ef6580318 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Sun, 22 Nov 2009 10:10:50 -0800 Subject: omap1: mmc: Add platform init for omap7xx The MMC mux pins normally used by omap chips in devices.c are different from what is needed by omap7xx chips. This change adds a conditional around the mux setup code to enable the correct mux pins. The omap730 and omap850 both use a different clock for the "fck" clock of the MMC interface than other omap processors based on the SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used by other omap processors. * Added the missing clock definition as mmc3_ck to clock.h * Added the clock definition to omap_clks in clock.c * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c With these changes, it is now possible to initialize and use MMC cards with omap730 and omap850 devices. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 3 ++- arch/arm/mach-omap1/clock.h | 12 ++++++++++++ arch/arm/mach-omap1/devices.c | 15 +++++++++++---- arch/arm/mach-omap1/mux.c | 5 +++++ arch/arm/plat-omap/include/plat/mux.h | 5 +++++ 5 files changed, 35 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index b4fec9a6e89e..7b146c06ca8a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -125,7 +125,8 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), CLK(NULL, "bclk", &bclk_16xx, CK_16XX), CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 17f874271255..fac921c00bfe 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -637,6 +637,18 @@ static struct clk mmc2_ck = { .enable_bit = 20, }; +static struct clk mmc3_ck = { + .name = "mmc_ck", + .id = 2, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 12, +}; + static struct clk virtual_ck_mpu = { .name = "mpu", .ops = &clkops_null, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 6d2f72dcbb04..23ded2d49600 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -108,15 +108,22 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { if (controller_nr == 0) { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap7xx()) { + omap_cfg_reg(MMC_7XX_CMD); + omap_cfg_reg(MMC_7XX_CLK); + omap_cfg_reg(MMC_7XX_DAT0); + } else { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + } + if (cpu_is_omap1710()) { omap_cfg_reg(M15_1710_MMC_CLKI); omap_cfg_reg(P19_1710_MMC_CMDDIR); omap_cfg_reg(P20_1710_MMC_DATDIR0); } - if (mmc_controller->slots[0].wires == 4) { + if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ if (!mmc_controller->slots[0].nomux) diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 1e6145c9ee93..785371e982fc 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -51,6 +51,11 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) + +/* MMC Pins */ +MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) +MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) +MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index f3c1d8a90456..56e357e9ec4e 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -219,6 +219,11 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + + /* MMC */ + MMC_7XX_CMD, + MMC_7XX_CLK, + MMC_7XX_DAT0, }; enum omap1xxx_index { -- cgit v1.2.3-58-ga151 From 45f780a06153544ab84fd1da3a8b28c07f61da1d Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Sun, 22 Nov 2009 10:10:52 -0800 Subject: omap1: omap_udc: Add clocking and disable vbus sense for omap7xx The l3_ocpi_ck clock is needed on omap7xx processors for USB. Additionally, bit 8 of the SOFT_REQ_REG needs to be enabled for the usb_dc_ck on omap7xx, which is a different bit than that of the omap16xx-defined clock of the same name. I added a provision for the usb_dc_ck and l3_ocpi_ck clocks as dc_clk and hhc_clk, respectively, for omap7xx CPUs. Additionally, I added a check in machine_without_vbus_sense for all omap7xx devices, as presently I know of no omap7xx-based devices that have vbus sense, and it made more sense to me to use a cpu check here than to spell out each machine one at a time. Finally, DMA is disabled for omap7xx, as it causes problems with these chips. Cc: linux-usb@vger.kernel.org Cc: David Brownell Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 1 + arch/arm/mach-omap1/clock.c | 3 ++- arch/arm/mach-omap1/clock.h | 10 ++++++++++ arch/arm/plat-omap/usb.c | 20 ++++++++++++++------ drivers/usb/gadget/omap_udc.c | 19 +++++++++++++++++-- 5 files changed, 44 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 55ecc01ea206..323272651933 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -11,6 +11,7 @@ config ARCH_OMAP850 depends on ARCH_OMAP1 bool "OMAP850 Based System" select CPU_ARM926T + select ARCH_OMAP_OTG config ARCH_OMAP15XX depends on ARCH_OMAP1 diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 7b146c06ca8a..42cbe203da36 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -99,7 +99,7 @@ static struct omap_clk omap_clks[] = { /* CK_GEN3 clocks */ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), @@ -120,6 +120,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index fac921c00bfe..29ffa97dc7f3 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -574,6 +574,16 @@ static struct clk usb_dc_ck = { .enable_bit = 4, }; +static struct clk usb_dc_ck7xx = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 8, +}; + static struct clk mclk_1510 = { .name = "mclk", .ops = &clkops_generic, diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 0ea1e0beb455..51033a4503c3 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -159,11 +159,14 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) * - OTG support on this port not yet written */ - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(7 << 4); - if (!is_device) - l |= (3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); + /* Don't do this for omap7xx -- it causes USB to not work correctly */ + if (!cpu_is_omap7xx()) { + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(7 << 4); + if (!is_device) + l |= (3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } return 3 << 16; } @@ -603,7 +606,12 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_dev) { syscon &= ~DEV_IDLE_EN; udc_device.dev.platform_data = config; - /* FIXME patch IRQ numbers for omap730 */ + /* IRQ numbers for omap7xx */ + if(cpu_is_omap7xx()) { + udc_resources[1].start = INT_7XX_USB_GENI; + udc_resources[2].start = INT_7XX_USB_NON_ISO; + udc_resources[3].start = INT_7XX_USB_ISO; + } status = platform_device_register(&udc_device); if (status) pr_debug("can't register UDC device, %d\n", status); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b836efe9ea71..f81e4f025f23 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2098,6 +2098,7 @@ static inline int machine_without_vbus_sense(void) || machine_is_omap_h4() #endif || machine_is_sx1() + || cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */ ); } @@ -2838,6 +2839,16 @@ static int __init omap_udc_probe(struct platform_device *pdev) udelay(100); } + if (cpu_is_omap7xx()) { + dc_clk = clk_get(&pdev->dev, "usb_dc_ck"); + hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); + BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); + /* can't use omap_udc_enable_clock yet */ + clk_enable(dc_clk); + clk_enable(hhc_clk); + udelay(100); + } + INFO("OMAP UDC rev %d.%d%s\n", omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf, config->otg ? ", Mini-AB" : ""); @@ -2970,7 +2981,7 @@ known: goto cleanup3; } #endif - if (cpu_is_omap16xx()) { + if (cpu_is_omap16xx() || cpu_is_omap7xx()) { udc->dc_clk = dc_clk; udc->hhc_clk = hhc_clk; clk_disable(hhc_clk); @@ -3008,7 +3019,7 @@ cleanup0: if (xceiv) otg_put_transceiver(xceiv); - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) { clk_disable(hhc_clk); clk_disable(dc_clk); clk_put(hhc_clk); @@ -3115,6 +3126,10 @@ static struct platform_driver udc_driver = { static int __init udc_init(void) { + /* Disable DMA for omap7xx -- it doesn't work right. */ + if (cpu_is_omap7xx()) + use_dma = 0; + INFO("%s, version: " DRIVER_VERSION #ifdef USE_ISO " (iso)" -- cgit v1.2.3-58-ga151 From 8384ce071365244332ea05c81112bfffcf48be87 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Sun, 22 Nov 2009 10:10:53 -0800 Subject: omap3: Runtime detection of Si features The OMAP35x family has multiple variants differing in the HW features. This patch detects these features at runtime and prints information during the boot. Since most of the code seemed repetitive, macros have been used for readability. Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 52 +++++++++++++++++++++++++++++-- arch/arm/plat-omap/include/plat/control.h | 34 ++++++++++++++++++++ arch/arm/plat-omap/include/plat/cpu.h | 25 +++++++++++++++ 3 files changed, 108 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d28e6fec7e47..d7ac8d547141 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,6 +28,7 @@ static struct omap_chip_id omap_chip; static unsigned int omap_revision; +u32 omap3_features; unsigned int omap_rev(void) { @@ -155,7 +156,33 @@ void __init omap24xx_check_revision(void) pr_info("\n"); } -void __init omap34xx_check_revision(void) +#define OMAP3_CHECK_FEATURE(status,feat) \ + if (((status & OMAP3_ ##feat## _MASK) \ + >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \ + omap3_features |= OMAP3_HAS_ ##feat; \ + } + +void __init omap3_check_features(void) +{ + u32 status; + + omap3_features = 0; + + status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS); + + OMAP3_CHECK_FEATURE(status, L2CACHE); + OMAP3_CHECK_FEATURE(status, IVA); + OMAP3_CHECK_FEATURE(status, SGX); + OMAP3_CHECK_FEATURE(status, NEON); + OMAP3_CHECK_FEATURE(status, ISP); + + /* + * TODO: Get additional info (where applicable) + * e.g. Size of L2 cache. + */ +} + +void __init omap3_check_revision(void) { u32 cpuid, idcode; u16 hawkeye; @@ -212,6 +239,22 @@ out: pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); } +#define OMAP3_SHOW_FEATURE(feat) \ + if (omap3_has_ ##feat()) { \ + pr_info (" - "#feat" : Y"); \ + } else { \ + pr_info (" - "#feat" : N"); \ + } + +void __init omap3_cpuinfo(void) +{ + OMAP3_SHOW_FEATURE(l2cache); + OMAP3_SHOW_FEATURE(iva); + OMAP3_SHOW_FEATURE(sgx); + OMAP3_SHOW_FEATURE(neon); + OMAP3_SHOW_FEATURE(isp); +} + /* * Try to detect the exact revision of the omap we're running on */ @@ -223,8 +266,11 @@ void __init omap2_check_revision(void) */ if (cpu_is_omap24xx()) omap24xx_check_revision(); - else if (cpu_is_omap34xx()) - omap34xx_check_revision(); + else if (cpu_is_omap34xx()) { + omap3_check_features(); + omap3_check_revision(); + omap3_cpuinfo(); + } else if (cpu_is_omap44xx()) { printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); return; diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 8237cb9e74fd..79985e497c4e 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -254,6 +254,40 @@ #define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) #define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C +/* + * CONTROL OMAP STATUS register to identify OMAP3 features + */ +#define OMAP3_CONTROL_OMAP_STATUS 0x044c + +#define OMAP3_SGX_SHIFT 13 +#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT) +#define FEAT_SGX_FULL 0 +#define FEAT_SGX_HALF 1 +#define FEAT_SGX_NONE 2 + +#define OMAP3_IVA_SHIFT 12 +#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT) +#define FEAT_IVA 0 +#define FEAT_IVA_NONE 1 + +#define OMAP3_L2CACHE_SHIFT 10 +#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT) +#define FEAT_L2CACHE_NONE 0 +#define FEAT_L2CACHE_64KB 1 +#define FEAT_L2CACHE_128KB 2 +#define FEAT_L2CACHE_256KB 3 + +#define OMAP3_ISP_SHIFT 5 +#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT) +#define FEAT_ISP 0 +#define FEAT_ISP_NONE 1 + +#define OMAP3_NEON_SHIFT 4 +#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT) +#define FEAT_NEON 0 +#define FEAT_NEON_NONE 1 + + #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index f129efb3075e..431fec45bbbc 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -30,6 +30,8 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#include + /* * Omap device type i.e. EMU/HS/TST/GP/BAD */ @@ -423,4 +425,27 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); +/* + * Runtime detection of OMAP3 features + */ +extern u32 omap3_features; + +#define OMAP3_HAS_L2CACHE BIT(0) +#define OMAP3_HAS_IVA BIT(1) +#define OMAP3_HAS_SGX BIT(2) +#define OMAP3_HAS_NEON BIT(3) +#define OMAP3_HAS_ISP BIT(4) + +#define OMAP3_HAS_FEATURE(feat,flag) \ +static inline unsigned int omap3_has_ ##feat(void) \ +{ \ + return (omap3_features & OMAP3_HAS_ ##flag); \ +} \ + +OMAP3_HAS_FEATURE(l2cache, L2CACHE) +OMAP3_HAS_FEATURE(sgx, SGX) +OMAP3_HAS_FEATURE(iva, IVA) +OMAP3_HAS_FEATURE(neon, NEON) +OMAP3_HAS_FEATURE(isp, ISP) + #endif -- cgit v1.2.3-58-ga151 From 048f4bd7607eb714d4831f90dea6fd27eac9e494 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Sun, 22 Nov 2009 10:10:54 -0800 Subject: omap3: Runtime detection of OMAP35x devices Add runtime check for these OMAP35x variations based on the detected Si features: OMAP3503, OMAP3515, OMAP3525 and OMA3530. Also, delayed the call to pr_info() into actual variant is detected in omap3_cpuinfo() Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 65 +++++++++++++++++++++++++++++------ arch/arm/plat-omap/include/plat/cpu.h | 41 ++++++++++++++++++++++ 2 files changed, 95 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d7ac8d547141..88999eaf91b6 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -187,7 +187,6 @@ void __init omap3_check_revision(void) u32 cpuid, idcode; u16 hawkeye; u8 rev; - char *rev_name = "ES1.0"; /* * We cannot access revision registers on ES1.0. @@ -197,7 +196,7 @@ void __init omap3_check_revision(void) cpuid = read_cpuid(CPUID_ID); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; - goto out; + return; } /* @@ -212,31 +211,24 @@ void __init omap3_check_revision(void) if (hawkeye == 0xb7ae) { switch (rev) { - case 0: + case 0: /* Take care of early samples */ + case 1: omap_revision = OMAP3430_REV_ES2_0; - rev_name = "ES2.0"; break; case 2: omap_revision = OMAP3430_REV_ES2_1; - rev_name = "ES2.1"; break; case 3: omap_revision = OMAP3430_REV_ES3_0; - rev_name = "ES3.0"; break; case 4: omap_revision = OMAP3430_REV_ES3_1; - rev_name = "ES3.1"; break; default: /* Use the latest known revision as default */ omap_revision = OMAP3430_REV_ES3_1; - rev_name = "Unknown revision\n"; } } - -out: - pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); } #define OMAP3_SHOW_FEATURE(feat) \ @@ -248,6 +240,57 @@ out: void __init omap3_cpuinfo(void) { + u8 rev = GET_OMAP_REVISION(); + char cpu_name[16], cpu_rev[16]; + + /* OMAP3430 and OMAP3530 are assumed to be same. + * + * OMAP3525, OMAP3515 and OMAP3503 can be detected only based + * on available features. Upon detection, update the CPU id + * and CPU class bits. + */ + if (omap3_has_iva() && omap3_has_sgx()) { + strcpy(cpu_name, "3430/3530"); + } + else if (omap3_has_sgx()) { + omap_revision = OMAP3525_REV(rev); + strcpy(cpu_name, "3525"); + } + else if (omap3_has_iva()) { + omap_revision = OMAP3515_REV(rev); + strcpy(cpu_name, "3515"); + } + else { + omap_revision = OMAP3503_REV(rev); + strcpy(cpu_name, "3503"); + } + + switch (rev) { + case OMAP_REVBITS_00: + strcpy(cpu_rev, "1.0"); + break; + case OMAP_REVBITS_10: + strcpy(cpu_rev, "2.0"); + break; + case OMAP_REVBITS_20: + strcpy(cpu_rev, "2.1"); + break; + case OMAP_REVBITS_30: + strcpy(cpu_rev, "3.0"); + break; + case OMAP_REVBITS_40: + strcpy(cpu_rev, "3.1"); + break; + default: + /* Use the latest known revision as default */ + strcpy(cpu_rev, "3.1"); + } + + /* + * Print verbose information + */ + pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev); + OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); OMAP3_SHOW_FEATURE(sgx); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 431fec45bbbc..a67439327de3 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -58,6 +58,23 @@ struct omap_chip_id { */ unsigned int omap_rev(void); +/* + * Define CPU revision bits + * + * Verbose meaning of the revision bits may be different for a silicon + * family. This difference can be handled separately. + */ +#define OMAP_REVBITS_00 0x00 +#define OMAP_REVBITS_10 0x10 +#define OMAP_REVBITS_20 0x20 +#define OMAP_REVBITS_30 0x30 +#define OMAP_REVBITS_40 0x40 + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + /* * Test if multicore OMAP support is needed */ @@ -303,6 +320,10 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 +#define cpu_is_omap3503() 0 +#define cpu_is_omap3515() 0 +#define cpu_is_omap3525() 0 +#define cpu_is_omap3530() 0 #define cpu_is_omap3430() 0 /* @@ -353,7 +374,21 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_ARCH_OMAP34XX) # undef cpu_is_omap3430 +# undef cpu_is_omap3503 +# undef cpu_is_omap3515 +# undef cpu_is_omap3525 +# undef cpu_is_omap3530 # define cpu_is_omap3430() is_omap3430() +# define cpu_is_omap3503() (cpu_is_omap3430() && \ + (!omap3_has_iva()) && \ + (!omap3_has_sgx())) +# define cpu_is_omap3515() (cpu_is_omap3430() && \ + (omap3_has_iva()) && \ + (!omap3_has_sgx())) +# define cpu_is_omap3525() (cpu_is_omap3430() && \ + (omap3_has_sgx()) && \ + (!omap3_has_iva())) +# define cpu_is_omap3530() (cpu_is_omap3430()) #endif # if defined(CONFIG_ARCH_OMAP4) @@ -384,6 +419,12 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES3_0 0x34303034 #define OMAP3430_REV_ES3_1 0x34304034 +#define OMAP35XX_CLASS 0x35000034 +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) + #define OMAP443X_CLASS 0x44300034 /* -- cgit v1.2.3-58-ga151 From 2456a10fb3a9b8c9e970b05e6c1370201675da0a Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sun, 22 Nov 2009 10:10:56 -0800 Subject: omap3: Introduce OMAP3630 OMAP3630 is the latest in the family of OMAP3 devices and among the changes it introduces are: New OPP levels for new voltage and frequency levels. a bunch of Bug fixes to various modules feature additions, notably with ISP, sDMA etc. Details about the chip is available here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606 Strategy used: Strategy to introduce this device into Linux was discussed here: Ref: http://marc.info/?t=125343303400003&r=1&w=2 Two approaches were available: a) Consider 3630 generation of devices as a new family of silicon b) Consider 3630 as an offshoot of 3430 family of devices As a common consensus, (b) seems to be more valid for 3630 as: * There are changes which are easily handled by using "FEATURES" infrastructure. For details how to do this, see thread: http://marc.info/?t=125050998500001&r=1&w=2 * Most of existing 34xx infrastructure can be reused(almost 90%+) - so no ugly if (cpu_is_omap34xx() || cpu_is_omap36xx()) all over the place - lesser chance of bugs due to reuse of proven code flow - 36xx specific handling can still be done where required within the existing infrastructure NOTE: * If additional 34xx series are added, OMAP3430_REV_ESXXXX can be added on top of the existing 3630 ones are renumbered This patch was tested on SDP3430, boot tested on 3630 platform using 3430sdp defconfig Signed-off-by: Madhusudhan Chikkature Rajashekar Signed-off-by: Nishanth Menon Signed-off-by: Vikram Pandita Cc: Allen Pais Cc: Anand Gadiyar Cc: Benoit Cousson Cc: Felipe Balbi Cc: Kevin Hilman Cc: Sanjeev Premi Cc: Santosh Shilimkar Cc: Sergio Alberto Aguirre Rodriguez Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 24 +++++++++++++++++++++--- arch/arm/plat-omap/include/plat/cpu.h | 6 ++++++ 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 88999eaf91b6..1c1511220890 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -209,7 +209,9 @@ void __init omap3_check_revision(void) hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0xff; - if (hawkeye == 0xb7ae) { + switch (hawkeye) { + case 0xb7ae: + /* Handle 34xx/35xx devices */ switch (rev) { case 0: /* Take care of early samples */ case 1: @@ -228,6 +230,21 @@ void __init omap3_check_revision(void) /* Use the latest known revision as default */ omap_revision = OMAP3430_REV_ES3_1; } + break; + case 0xb891: + /* Handle 36xx devices */ + switch (rev) { + case 0: + omap_revision = OMAP3630_REV_ES1_0; + break; + default: + /* Use the latest known revision as default */ + omap_revision = OMAP3630_REV_ES1_0; + } + break; + default: + /* Unknown default to latest silicon rev as default*/ + omap_revision = OMAP3630_REV_ES1_0; } } @@ -249,9 +266,10 @@ void __init omap3_cpuinfo(void) * on available features. Upon detection, update the CPU id * and CPU class bits. */ - if (omap3_has_iva() && omap3_has_sgx()) { + if (cpu_is_omap3630()) + strcpy(cpu_name, "3630"); + else if (omap3_has_iva() && omap3_has_sgx()) strcpy(cpu_name, "3430/3530"); - } else if (omap3_has_sgx()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "3525"); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index a67439327de3..f4f7a2f0c036 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -180,6 +180,7 @@ IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) +IS_OMAP_SUBCLASS(363x, 0x363) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -325,6 +326,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap3525() 0 #define cpu_is_omap3530() 0 #define cpu_is_omap3430() 0 +#define cpu_is_omap3630() 0 /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish @@ -389,6 +391,8 @@ IS_OMAP_TYPE(3430, 0x3430) (omap3_has_sgx()) && \ (!omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) +# undef cpu_is_omap3630 +# define cpu_is_omap3630() is_omap363x() #endif # if defined(CONFIG_ARCH_OMAP4) @@ -419,6 +423,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES3_0 0x34303034 #define OMAP3430_REV_ES3_1 0x34304034 +#define OMAP3630_REV_ES1_0 0x36300034 + #define OMAP35XX_CLASS 0x35000034 #define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) #define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -- cgit v1.2.3-58-ga151 From f18af0a847f9e1a843bcb8ba69697ccbba2d03e9 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:10:57 -0800 Subject: omap3: 3630: update is_chip variable 3630 is getting treated like next rev of 3430 omap_chip.oc variable has to be updated for 3630 version Otherwise the Core power domain is not getting registered. This gets used in the registration of power domains in: "arch/arm/mach-omap2/powerdomains34xx.h" core_34xx_es3_1_pwrdm OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1) Core power doman will get registered for 3630 only when .oc is populated correctly. Tested on Zoom3(3630) board Signed-off-by: Vikram Pandita Acked-by: Alexander Shishkin Acked-by: Ari Kauppi Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 2 ++ arch/arm/plat-omap/include/plat/cpu.h | 7 +++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 1c1511220890..189cf7a6e61b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -359,6 +359,8 @@ void __init omap2_check_revision(void) omap_chip.oc |= CHIP_IS_OMAP3430ES3_0; else if (omap_rev() == OMAP3430_REV_ES3_1) omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; + else if (omap_rev() == OMAP3630_REV_ES1_0) + omap_chip.oc |= CHIP_IS_OMAP3630ES1; } else { pr_err("Uninitialized omap_chip, please fix!\n"); } diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index f4f7a2f0c036..7babefce62e1 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -454,6 +454,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define CHIP_IS_OMAP3430ES2 (1 << 4) #define CHIP_IS_OMAP3430ES3_0 (1 << 5) #define CHIP_IS_OMAP3430ES3_1 (1 << 6) +#define CHIP_IS_OMAP3630ES1 (1 << 7) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) @@ -465,8 +466,10 @@ IS_OMAP_TYPE(3430, 0x3430) */ #define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ CHIP_IS_OMAP3430ES3_0 | \ - CHIP_IS_OMAP3430ES3_1) -#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1) + CHIP_IS_OMAP3430ES3_1 | \ + CHIP_IS_OMAP3630ES1) +#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \ + CHIP_IS_OMAP3630ES1) int omap_chip_is(struct omap_chip_id oci); -- cgit v1.2.3-58-ga151 From 4cac60180649b83e094d4ea5c440229814488431 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Sun, 22 Nov 2009 10:10:58 -0800 Subject: omap3: AM35xx: Runtime detection of the device Add support to detect AM3505/AM3517 devices at runtime. Also updates the CPU names printed during boot. Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 36 +++++++++++++++++++++++++++++------ arch/arm/plat-omap/include/plat/cpu.h | 12 ++++++++++++ 2 files changed, 42 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 189cf7a6e61b..f8252c64c423 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -242,6 +242,14 @@ void __init omap3_check_revision(void) omap_revision = OMAP3630_REV_ES1_0; } break; + case 0xb868: + /* Handle OMAP35xx/AM35xx devices + * + * Set the device to be OMAP3505 here. Actual device + * is identified later based on the features. + */ + omap_revision = OMAP3505_REV(rev); + break; default: /* Unknown default to latest silicon rev as default*/ omap_revision = OMAP3630_REV_ES1_0; @@ -267,20 +275,36 @@ void __init omap3_cpuinfo(void) * and CPU class bits. */ if (cpu_is_omap3630()) - strcpy(cpu_name, "3630"); + strcpy(cpu_name, "OMAP3630"); + else if (cpu_is_omap3505()) { + /* + * AM35xx devices + */ + if (omap3_has_sgx()) { + omap_revision = OMAP3517_REV(rev); + strcpy(cpu_name, "AM3517"); + } + else { + /* Already set in omap3_check_revision() */ + strcpy(cpu_name, "AM3505"); + } + } + /* + * OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices + */ else if (omap3_has_iva() && omap3_has_sgx()) - strcpy(cpu_name, "3430/3530"); + strcpy(cpu_name, "OMAP3430/3530"); else if (omap3_has_sgx()) { omap_revision = OMAP3525_REV(rev); - strcpy(cpu_name, "3525"); + strcpy(cpu_name, "OMAP3525"); } else if (omap3_has_iva()) { omap_revision = OMAP3515_REV(rev); - strcpy(cpu_name, "3515"); + strcpy(cpu_name, "OMAP3515"); } else { omap_revision = OMAP3503_REV(rev); - strcpy(cpu_name, "3503"); + strcpy(cpu_name, "OMAP3503"); } switch (rev) { @@ -307,7 +331,7 @@ void __init omap3_cpuinfo(void) /* * Print verbose information */ - pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev); + pr_info("%s ES%s\n", cpu_name, cpu_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 7babefce62e1..2e1789001dfe 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -284,6 +284,8 @@ IS_OMAP_SUBCLASS(363x, 0x363) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 + * cpu_is_omap3505(): True for OMAP3505 + * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -307,6 +309,8 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) +IS_OMAP_TYPE(3505, 0x3505) +IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -325,6 +329,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap3515() 0 #define cpu_is_omap3525() 0 #define cpu_is_omap3530() 0 +#define cpu_is_omap3505() 0 +#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -380,6 +386,8 @@ IS_OMAP_TYPE(3430, 0x3430) # undef cpu_is_omap3515 # undef cpu_is_omap3525 # undef cpu_is_omap3530 +# undef cpu_is_omap3505 +# undef cpu_is_omap3517 # define cpu_is_omap3430() is_omap3430() # define cpu_is_omap3503() (cpu_is_omap3430() && \ (!omap3_has_iva()) && \ @@ -391,6 +399,8 @@ IS_OMAP_TYPE(3430, 0x3430) (omap3_has_sgx()) && \ (!omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) +# define cpu_is_omap3505() is_omap3505() +# define cpu_is_omap3517() is_omap3517() # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() #endif @@ -430,6 +440,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) #define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) #define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) #define OMAP443X_CLASS 0x44300034 -- cgit v1.2.3-58-ga151 From 56190b609b9c011363dd761838ce01cd3cd0a24f Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Sun, 22 Nov 2009 10:10:59 -0800 Subject: omap3: AM35xx: Initialize omap_chip bits AM35xx is functionally similar to OMAP3430 ES3.1 from a powerdomain/clockdomain perspective. This patch initializes the omap_chip bits on AM35xx for use by powerdomain and clockdomain code. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f8252c64c423..441ca26270a5 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -372,6 +372,8 @@ void __init omap2_check_revision(void) } else if (cpu_is_omap242x()) { /* Currently only supports 2420ES2.1.1 and 2420-all */ omap_chip.oc |= CHIP_IS_OMAP2420; + } else if (cpu_is_omap3505() || cpu_is_omap3517()) { + omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1; } else if (cpu_is_omap343x()) { omap_chip.oc = CHIP_IS_OMAP3430; if (omap_rev() == OMAP3430_REV_ES1_0) -- cgit v1.2.3-58-ga151 From 83720a8230f87008deba8619428438f0276b83ca Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Sun, 22 Nov 2009 10:11:00 -0800 Subject: omap: update plat/usb.h to allow ehci driver to build Add missing declarations to allow the recently introduced ehci-omap driver to build on OMAP3 Signed-off-by: Anand Gadiyar Cc: Felipe Balbi Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/plat-omap/include/plat/usb.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 33e72ca125d7..33a500eb2f93 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -5,6 +5,21 @@ #include +#define OMAP3_HS_USB_PORTS 3 +enum ehci_hcd_omap_mode { + EHCI_HCD_OMAP_MODE_UNKNOWN, + EHCI_HCD_OMAP_MODE_PHY, + EHCI_HCD_OMAP_MODE_TLL, +}; + +struct ehci_hcd_omap_platform_data { + enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; + + /* have to be valid if phy_reset is true and portx is in phy mode */ + int reset_gpio_port[OMAP3_HS_USB_PORTS]; +}; + /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 @@ -29,6 +44,8 @@ extern void usb_musb_init(void); +extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata); + #endif void omap_usb_init(struct omap_usb_config *pdata); -- cgit v1.2.3-58-ga151 From 58a5491c936957011c92f8cc5097fb3231ee3f9c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 22 Nov 2009 10:11:01 -0800 Subject: omap: Add platform init code for EHCI driver Add platform init code for EHCI driver. Various fixes to the original patch by Ajay Kumar Gupta and Anand Gadiyar . Overo support added by Olof Johansson Beagle support added by Koen Kooi CM-T32 support added by Mike Rapoport Signed-off-by: Signed-off-by: Olof Johansson Acked-by: Steve Sakoman Signed-off-by: Koen Kooi Signed-off-by: Mike Rapoport Signed-off-by: Ajay Kumar Gupta Signed-off-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-3430sdp.c | 13 ++ arch/arm/mach-omap2/board-omap3beagle.c | 13 ++ arch/arm/mach-omap2/board-omap3evm.c | 15 +++ arch/arm/mach-omap2/board-omap3pandora.c | 13 ++ arch/arm/mach-omap2/board-overo.c | 21 ++-- arch/arm/mach-omap2/usb-ehci.c | 192 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/omap34xx.h | 6 +- 8 files changed, 265 insertions(+), 9 deletions(-) create mode 100644 arch/arm/mach-omap2/usb-ehci.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1d54ad349bfd..5c32b650ae12 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o +obj-y += usb-ehci.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 4f052982b7cc..491364e44c7d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -494,6 +494,18 @@ static void enable_board_wakeup_source(void) omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ } +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = 57, + .reset_gpio_port[1] = 61, + .reset_gpio_port[2] = -EINVAL +}; + static void __init omap_3430sdp_init(void) { omap3430_i2c_init(); @@ -510,6 +522,7 @@ static void __init omap_3430sdp_init(void) usb_musb_init(); board_smc91x_init(); enable_board_wakeup_source(); + usb_ehci_init(&ehci_pdata); } static void __init omap_3430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4e69f8ed30dc..41480bd0e58a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -410,6 +410,18 @@ static void __init omap3beagle_flash_init(void) } } +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + static void __init omap3_beagle_init(void) { omap3_beagle_i2c_init(); @@ -423,6 +435,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(); + usb_ehci_init(&ehci_pdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e0cac96a7860..1edf06adbe3c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -307,6 +307,18 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3evm_smc911x_device, }; +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 135, + .reset_gpio_port[2] = -EINVAL +}; + static void __init omap3_evm_init(void) { omap3_evm_i2c_init(); @@ -322,6 +334,9 @@ static void __init omap3_evm_init(void) usb_nop_xceiv_register(); #endif usb_musb_init(); + /* Setup EHCI phy reset padconfig */ + omap_cfg_reg(AF4_34XX_GPIO135_OUT); + usb_ehci_init(&ehci_pdata); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 3b2e5463fc5d..2db5ba5b3bf7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -397,6 +397,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_keys_gpio, }; +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = 16, + .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[2] = -EINVAL +}; + static void __init omap3pandora_init(void) { omap3pandora_i2c_init(); @@ -406,6 +418,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); + usb_ehci_init(&ehci_pdata); pandora_keys_gpio_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 59d0dfa0eae8..52dfd51a938e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -394,6 +394,18 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL +}; + + static void __init overo_init(void) { overo_i2c_init(); @@ -401,6 +413,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(); + usb_ehci_init(&ehci_pdata); overo_ads7846_init(); overo_init_smsc911x(); @@ -443,14 +456,6 @@ static void __init overo_init(void) else printk(KERN_ERR "could not obtain gpio for " "OVERO_GPIO_USBH_CPEN\n"); - - if ((gpio_request(OVERO_GPIO_USBH_NRESET, - "OVERO_GPIO_USBH_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0)) - gpio_export(OVERO_GPIO_USBH_NRESET, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_USBH_NRESET\n"); } static void __init overo_map_io(void) diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c new file mode 100644 index 000000000000..e448abd5ec5d --- /dev/null +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-omap2/usb-ehci.c + * + * This file will contain the board specific details for the + * Synopsys EHCI host controller on OMAP3430 + * + * Copyright (C) 2007 Texas Instruments + * Author: Vikram Pandita + * + * Generalization by: + * Felipe Balbi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) + +static struct resource ehci_resources[] = { + { + .start = OMAP34XX_EHCI_BASE, + .end = OMAP34XX_EHCI_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_UHH_CONFIG_BASE, + .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_USBTLL_BASE, + .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* general IRQ */ + .start = INT_34XX_EHCI_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ehci_dmamask = ~(u32)0; +static struct platform_device ehci_device = { + .name = "ehci-omap", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(ehci_resources), + .resource = ehci_resources, +}; + +/* MUX settings for EHCI pins */ +/* + * setup_ehci_io_mux - initialize IO pad mux for USBHOST + */ +static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) +{ + switch (port_mode[0]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); + omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); + omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); + omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); + omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); + omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); + omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); + omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); + omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); + omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); + omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); + omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); + omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); + omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); + omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); + omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); + omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); + omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); + omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); + omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); + omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); + omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); + omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + switch (port_mode[1]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); + omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); + omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); + omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); + omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); + omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); + omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); + omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); + omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); + omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); + omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); + omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); + omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); + omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); + omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); + omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); + omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); + omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); + omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); + omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); + omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); + omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); + omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + switch (port_mode[2]) { + case EHCI_HCD_OMAP_MODE_PHY: + printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); + omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); + omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); + omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); + omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); + omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); + omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); + omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); + omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); + omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); + omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); + omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + return; +} + +void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) +{ + platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); + + /* Setup Pin IO MUX for EHCI */ + if (cpu_is_omap34xx()) + setup_ehci_io_mux(pdata->port_mode); + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); + return; + } +} + +#else + +void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) + +{ +} + +#endif /* CONFIG_USB_EHCI_HCD */ + diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index f8d186a73712..46557075facb 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -74,8 +74,12 @@ #define OMAP34XX_IVA_INTC_BASE 0x40000000 #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) -#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) +#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000) +#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400) +#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800) +#define OMAP34XX_SR1_BASE 0x480C9000 +#define OMAP34XX_SR2_BASE 0x480CB000 #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) -- cgit v1.2.3-58-ga151 From 935e4739fc4817b1044fdbeed5fe19aee9f03f45 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:02 -0800 Subject: omap: iommu: avoid remapping if it's been mapped in MPU side MPU side (v)-(p) mapping is necessary only if IOVMF_MMIO is set in "flags". Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iovmm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 0ce36bbef9d2..577d8c03b8e1 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -617,7 +617,7 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, u32 flags) { size_t bytes; - void *va; + void *va = NULL; if (!obj || !obj->dev || !sgt) return -EINVAL; @@ -627,9 +627,11 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, return -EINVAL; bytes = PAGE_ALIGN(bytes); - va = vmap_sg(sgt); - if (IS_ERR(va)) - return PTR_ERR(va); + if (flags & IOVMF_MMIO) { + va = vmap_sg(sgt); + if (IS_ERR(va)) + return PTR_ERR(va); + } flags &= IOVMF_HW_MASK; flags |= IOVMF_DISCONT; -- cgit v1.2.3-58-ga151 From 5934ba2dc04f5b3be48cb53b6a830885970f7487 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:04 -0800 Subject: omap: iovmm: remove cache flush operation Cache flush operation is handled in the upper client layer and iovmm modules doesn't have to care about it. This patch will improve some performance with current camera isp driver. Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iovmm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 577d8c03b8e1..544772ede470 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -392,7 +392,6 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) } va_end = _va + PAGE_SIZE * i; - flush_cache_vmap((unsigned long)_va, (unsigned long)va_end); } static inline void sgtable_drain_vmalloc(struct sg_table *sgt) @@ -427,8 +426,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len) len -= bytes; } BUG_ON(len); - - clean_dcache_area(va, len); } static inline void sgtable_drain_kmalloc(struct sg_table *sgt) -- cgit v1.2.3-58-ga151 From a76e9a90e8dc0c8ca641a077780c6e05270d25ff Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Sun, 22 Nov 2009 10:11:04 -0800 Subject: omap: iommu: reorganize This way it's more object oriented and easier to see what is happening. No functional changes. Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap3-iommu.c | 62 +++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c index 6a9bf4f59d8a..fbbcb5c83367 100644 --- a/arch/arm/mach-omap2/omap3-iommu.c +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -14,47 +14,50 @@ #include -#define OMAP3_MMU1_BASE 0x480bd400 -#define OMAP3_MMU2_BASE 0x5d000000 -#define OMAP3_MMU1_IRQ 24 -#define OMAP3_MMU2_IRQ 28 - - -static unsigned long iommu_base[] __initdata = { - OMAP3_MMU1_BASE, - OMAP3_MMU2_BASE, -}; - -static int iommu_irq[] __initdata = { - OMAP3_MMU1_IRQ, - OMAP3_MMU2_IRQ, +struct iommu_device { + resource_size_t base; + int irq; + struct iommu_platform_data pdata; + struct resource res[2]; }; -static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = { +static struct iommu_device devices[] = { { - .name = "isp", - .nr_tlb_entries = 8, - .clk_name = "cam_ick", + .base = 0x480bd400, + .irq = 24, + .pdata = { + .name = "isp", + .nr_tlb_entries = 8, + .clk_name = "cam_ick", + }, }, #if defined(CONFIG_MPU_BRIDGE_IOMMU) { - .name = "iva2", - .nr_tlb_entries = 32, - .clk_name = "iva2_ck", + .base = 0x5d000000, + .irq = 28, + .pdata = { + .name = "iva2", + .nr_tlb_entries = 32, + .clk_name = "iva2_ck", + }, }, #endif }; -#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata) +#define NR_IOMMU_DEVICES ARRAY_SIZE(devices) static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; static int __init omap3_iommu_init(void) { int i, err; + struct resource res[] = { + { .flags = IORESOURCE_MEM }, + { .flags = IORESOURCE_IRQ }, + }; for (i = 0; i < NR_IOMMU_DEVICES; i++) { struct platform_device *pdev; - struct resource res[2]; + const struct iommu_device *d = &devices[i]; pdev = platform_device_alloc("omap-iommu", i); if (!pdev) { @@ -62,19 +65,16 @@ static int __init omap3_iommu_init(void) goto err_out; } - memset(res, 0, sizeof(res)); - res[0].start = iommu_base[i]; - res[0].end = iommu_base[i] + MMU_REG_SIZE - 1; - res[0].flags = IORESOURCE_MEM; - res[1].start = res[1].end = iommu_irq[i]; - res[1].flags = IORESOURCE_IRQ; + res[0].start = d->base; + res[0].end = d->base + MMU_REG_SIZE - 1; + res[1].start = res[1].end = d->irq; err = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (err) goto err_out; - err = platform_device_add_data(pdev, &omap3_iommu_pdata[i], - sizeof(omap3_iommu_pdata[0])); + err = platform_device_add_data(pdev, &d->pdata, + sizeof(d->pdata)); if (err) goto err_out; err = platform_device_add(pdev); -- cgit v1.2.3-58-ga151 From eebfa9f239a21d9663af03b50958d4d0bb7ab1d9 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Sun, 22 Nov 2009 10:11:05 -0800 Subject: omap: McBSP: Do not use extensive spin locks for dma_op_mode The use of the spin lock, which supposed to protect the the dma_op_mode causing "INFO: inconsistent lock state" on playback start. Remove the spin locks around the dma_op_mode, when it's purpuse is to protect the dma_op_mode. Signed-off-by: Peter Ujfalusi Acked-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 92770334d728..2cc1cc328bac 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -298,9 +298,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id) } mcbsp = id_to_mcbsp_ptr(id); - spin_lock_irq(&mcbsp->lock); dma_op_mode = mcbsp->dma_op_mode; - spin_unlock_irq(&mcbsp->lock); return dma_op_mode; } @@ -318,7 +316,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); - spin_lock_irq(&mcbsp->lock); if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02)); @@ -327,7 +324,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) } else { syscon |= SIDLEMODE(0x01); } - spin_unlock_irq(&mcbsp->lock); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); } @@ -1145,9 +1141,7 @@ static ssize_t dma_op_mode_show(struct device *dev, ssize_t len = 0; const char * const *s; - spin_lock_irq(&mcbsp->lock); dma_op_mode = mcbsp->dma_op_mode; - spin_unlock_irq(&mcbsp->lock); for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { if (dma_op_mode == i) -- cgit v1.2.3-58-ga151 From 4596d14ad88bbacc80970cb964b8f3d6ade7e305 Mon Sep 17 00:00:00 2001 From: Madhu Date: Sun, 22 Nov 2009 10:11:06 -0800 Subject: omap3630: Add HSMMC related checks Change the cpu_is_omap3430() check to cpu_is_omap34xx() to allow HSMMC1/2 mux configuration for omap3630. Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7d4513b619f2..8d23e1f7f84b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -575,7 +575,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, } } - if (cpu_is_omap3430()) { + if (cpu_is_omap34xx()) { if (controller_nr == 0) { omap_cfg_reg(N28_3430_MMC1_CLK); omap_cfg_reg(M27_3430_MMC1_CMD); -- cgit v1.2.3-58-ga151 From 41fd03d66e6ae4430a0fdf7c62692a7b20b6ee6b Mon Sep 17 00:00:00 2001 From: Madhu Date: Sun, 22 Nov 2009 10:11:07 -0800 Subject: omap3630: Configure HSMMC1 to 4-bit The HSMMC1 controller on omap3630 supprts only 4-bit mode. If cpu is 3630 configure HSMMC1 wires to 4-bit. Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mmc-twl4030.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 340391468909..7bef170686dd 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -489,6 +489,12 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) /* on-chip level shifting via PBIAS0/PBIAS1 */ mmc->slots[0].set_power = twl_mmc1_set_power; mmc->slots[0].set_sleep = twl_mmc1_set_sleep; + + /* Omap3630 HSMMC1 supports only 4-bit */ + if (cpu_is_omap3630() && c->wires > 4) { + c->wires = 4; + mmc->slots[0].wires = c->wires; + } break; case 2: if (c->ext_clock) -- cgit v1.2.3-58-ga151 From 555d503ff30b3b1292d743bb77b19212b6befb59 Mon Sep 17 00:00:00 2001 From: Madhu Date: Sun, 22 Nov 2009 10:11:08 -0800 Subject: omap3630: Set omap3630 MMC1 I/O speed to 52Mhz The speed ctrl bit for MMC I/O is part of CONTROL_PROG_IO1 register in omap3630.This patch sets it up accordingly. Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mmc-twl4030.c | 11 +++++++++-- arch/arm/plat-omap/include/plat/control.h | 3 +++ 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 7bef170686dd..0c3c72d934bf 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -213,7 +213,7 @@ static int twl4030_mmc_get_context_loss(struct device *dev) static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, int vdd) { - u32 reg; + u32 reg, prog_io; int ret = 0; struct twl_mmc_controller *c = &hsmmc[0]; struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -245,7 +245,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, } reg = omap_ctrl_readl(control_pbias_offset); - reg |= OMAP2_PBIASSPEEDCTRL0; + if (cpu_is_omap3630()) { + /* Set MMC I/O to 52Mhz */ + prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); + prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; + omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); + } else { + reg |= OMAP2_PBIASSPEEDCTRL0; + } reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index 79985e497c4e..2ae884378638 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -241,6 +241,9 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) +/* CONTROL_PROG_IO1 bits */ +#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) + /* CONTROL_IVA2_BOOTMOD bits */ #define OMAP3_IVA2_BOOTMOD_SHIFT 0 #define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) -- cgit v1.2.3-58-ga151 From 4679232d3a2085fa5080f260d68b4049c14d5b76 Mon Sep 17 00:00:00 2001 From: Madhu Date: Sun, 22 Nov 2009 10:11:08 -0800 Subject: omap3: HSMMC2 8-bit mux configuration Add support for omap hsmmc2 8-bit mux configuration. Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 6 ++++++ arch/arm/mach-omap2/mux.c | 8 ++++++++ arch/arm/plat-omap/include/plat/mux.h | 4 ++++ 3 files changed, 18 insertions(+) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 8d23e1f7f84b..8b6cd8c82dd2 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -609,6 +609,12 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_cfg_reg(AG4_3430_MMC2_DAT2); omap_cfg_reg(AF4_3430_MMC2_DAT3); } + if (mmc_controller->slots[0].wires == 8) { + omap_cfg_reg(AE4_3430_MMC2_DAT4); + omap_cfg_reg(AH3_3430_MMC2_DAT5); + omap_cfg_reg(AF3_3430_MMC2_DAT6); + omap_cfg_reg(AE3_3430_MMC2_DAT7); + } } /* diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 32c953e608db..83256d349444 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -532,6 +532,14 @@ MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) /* MMC3 */ MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 56e357e9ec4e..f74331d4a9c3 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -834,6 +834,10 @@ enum omap34xx_index { AH4_3430_MMC2_DAT1, AG4_3430_MMC2_DAT2, AF4_3430_MMC2_DAT3, + AE4_3430_MMC2_DAT4, + AH3_3430_MMC2_DAT5, + AF3_3430_MMC2_DAT6, + AE3_3430_MMC2_DAT7, /* MMC3 */ AF10_3430_MMC3_CLK, -- cgit v1.2.3-58-ga151 From 839c978794f3d2d0dce4693bbb087f9507bbab9b Mon Sep 17 00:00:00 2001 From: Sriram Date: Sun, 22 Nov 2009 10:11:09 -0800 Subject: omap3: evm: make HSMMC driver built-in For ease of use it is preferrable to build in HSMMC driver rather than build it as kernel module. This patches updates default configuration for omap3evm to reflect this change. Signed-off-by: Sriramakrishnan Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_evm_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index d5ff4776cd0a..36c99e09c8ce 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -1126,7 +1126,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_OMAP is not set -CONFIG_MMC_OMAP_HS=m +CONFIG_MMC_OMAP_HS=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set -- cgit v1.2.3-58-ga151 From 05574bb27a8a46d354582e72691ff6cb40712da9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sun, 22 Nov 2009 10:11:12 -0800 Subject: omap3: move check_revision above check_features omap3_check_revision() does not depend on omap3_check_features() move this above so that we can add logic based on revision detected in check_features. Signed-off-by: Nishanth Menon Acked-by: Mika Westerberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 441ca26270a5..6c11b41b4d44 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -352,8 +352,8 @@ void __init omap2_check_revision(void) if (cpu_is_omap24xx()) omap24xx_check_revision(); else if (cpu_is_omap34xx()) { - omap3_check_features(); omap3_check_revision(); + omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { -- cgit v1.2.3-58-ga151 From cedf900d657e09f060b52f0598fc56aae9fbfba3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Sun, 22 Nov 2009 10:11:13 -0800 Subject: omap3: keep SoC features on the same line When listing the various SoC features, print them on the same line. So, instead of this OMAP3430/3530 ES3.1 - l2cache : Y - iva : Y - sgx : Y - neon : Y - isp : Y you get this: OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp ) Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c11b41b4d44..49846601fe77 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -257,11 +257,8 @@ void __init omap3_check_revision(void) } #define OMAP3_SHOW_FEATURE(feat) \ - if (omap3_has_ ##feat()) { \ - pr_info (" - "#feat" : Y"); \ - } else { \ - pr_info (" - "#feat" : N"); \ - } + if (omap3_has_ ##feat()) \ + printk(#feat" "); void __init omap3_cpuinfo(void) { @@ -331,13 +328,15 @@ void __init omap3_cpuinfo(void) /* * Print verbose information */ - pr_info("%s ES%s\n", cpu_name, cpu_rev); + pr_info("%s ES%s (", cpu_name, cpu_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); OMAP3_SHOW_FEATURE(sgx); OMAP3_SHOW_FEATURE(neon); OMAP3_SHOW_FEATURE(isp); + + printk(")\n"); } /* -- cgit v1.2.3-58-ga151 From 13a032295710b49d331bb53086a7de4557243851 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 22 Nov 2009 10:11:15 -0800 Subject: omap3: drop all IVA-related address base definitions All of the OMAP3 IVA physical address macros in plat-omap/include/plat/omap34xx.h are wrong[1]: OMAP34XX_IVA_INTC_BASE: The IVA interrupt controller does not appear to be accessible from the L3 interconnect, and in any case is definitely not at 0x40000000; the latter address appears to be the internal IVA physical address base for the OMAP2420's interrupt control[2]. OMAP34XX_DSP_BASE: The section of L3 physical address space mapped to the IVA starts at 0x5c000000, not 0x58000000. OMAP34XX_DSP_MEM_BASE: It's not clear what this refers to, but it's not in the L3 IVA address space. OMAP34XX_DSP_IPI_BASE: The Intrusive Port Interface is a relic from the OMAP2420 days and no longer applies to OMAP3. OMAP34XX_DSP_MMU_BASE: The DSP MMU is mapped at 0x5d000000, not 0x5a000000. Nothing that uses these can possibly be working, so drop them. When future code needs these, correct versions can be added in. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. W, Table 2-8: "L3 Interconnect View of the IVA2.2 Subsystem Memory Space." p. 229. 2. OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (Rev. Q), section 2.2.4.1, "IVA Memory Space Seen by L3", p. 132. 3. ibid., section 4.3.11, "DSP IPI Overview", p. 200. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/omap34xx.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index 46557075facb..077f05979f86 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -72,7 +72,6 @@ #define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) #define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) -#define OMAP34XX_IVA_INTC_BASE 0x40000000 #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) #define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000) @@ -83,9 +82,5 @@ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) -#define OMAP34XX_DSP_BASE 0x58000000 -#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) -#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) -#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) #endif /* __ASM_ARCH_OMAP34XX_H */ -- cgit v1.2.3-58-ga151 From 20e11c2d1c8ca49829ee9e5690adc89488e5da31 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 22 Nov 2009 10:11:16 -0800 Subject: arch/arm/plat-omap: Drop an unnecessary NULL test map_iovm_area is only called from a context where its second argument is known not to be NULL, so drop the unnecessary test. If new could be NULL, the initialization of da should be moved below the test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Cc: Russell King Cc: Hiroshi DOYU Signed-off-by: Tony Lindgren Signed-off-by: Andrew Morton --- arch/arm/plat-omap/iovmm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 544772ede470..936aef1971cd 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -446,7 +446,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, struct scatterlist *sg; u32 da = new->da_start; - if (!obj || !new || !sgt) + if (!obj || !sgt) return -EINVAL; BUG_ON(!sgtable_ok(sgt)); -- cgit v1.2.3-58-ga151 From 59fdc6ebda441a26ec055d61cf9d670a33eeca2d Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:17 -0800 Subject: omap: mailbox: Add build specific changes to support omap mailbox This patch adds changes to the build related files of mailbox driver Signed-off-by: C A Subramaniam Signed-off-by: Ramesh Gupta G Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5c32b650ae12..b77fe2463692 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -44,6 +44,9 @@ obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o +mailbox_mach-objs := mailbox.o + iommu-y += iommu2.o iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o -- cgit v1.2.3-58-ga151 From 454bf340c986b798cd4c2fd676caffa2c1e61482 Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:18 -0800 Subject: omap: mailbox: Add resources and mailbox register base address for OMAP4 mailbox This patch adds resource information of mailbox driver for OMAP4 mailbox module. Register base address also added Signed-off-by: C A Subramaniam Signed-off-by: Ramesh Gupta G Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 36 ++++++++++++++++++++++-------- arch/arm/plat-omap/include/plat/omap44xx.h | 2 ++ 2 files changed, 29 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 8b6cd8c82dd2..733d3dcff98b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -136,9 +136,10 @@ static inline void omap_init_camera(void) #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) -#define MBOX_REG_SIZE 0x120 +#define MBOX_REG_SIZE 0x120 -static struct resource omap2_mbox_resources[] = { +#ifdef CONFIG_ARCH_OMAP2 +static struct resource omap_mbox_resources[] = { { .start = OMAP24XX_MAILBOX_BASE, .end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, @@ -153,8 +154,10 @@ static struct resource omap2_mbox_resources[] = { .flags = IORESOURCE_IRQ, }, }; +#endif -static struct resource omap3_mbox_resources[] = { +#ifdef CONFIG_ARCH_OMAP3 +static struct resource omap_mbox_resources[] = { { .start = OMAP34XX_MAILBOX_BASE, .end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, @@ -165,6 +168,24 @@ static struct resource omap3_mbox_resources[] = { .flags = IORESOURCE_IRQ, }, }; +#endif + +#ifdef CONFIG_ARCH_OMAP4 + +#define OMAP4_MBOX_REG_SIZE 0x130 +static struct resource omap_mbox_resources[] = { + { + .start = OMAP44XX_MAILBOX_BASE, + .end = OMAP44XX_MAILBOX_BASE + + OMAP4_MBOX_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_44XX_MAIL_U0_MPU, + .flags = IORESOURCE_IRQ, + }, +}; +#endif static struct platform_device mbox_device = { .name = "omap2-mailbox", @@ -173,12 +194,9 @@ static struct platform_device mbox_device = { static inline void omap_init_mbox(void) { - if (cpu_is_omap2420()) { - mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources); - mbox_device.resource = omap2_mbox_resources; - } else if (cpu_is_omap3430()) { - mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources); - mbox_device.resource = omap3_mbox_resources; + if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) { + mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources); + mbox_device.resource = omap_mbox_resources; } else { pr_err("%s: platform not supported\n", __func__); return; diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index 336189753671..e52902a15c1a 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -40,5 +40,7 @@ #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 #define OMAP44XX_WKUPGEN_BASE 0x48281000 +#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) + #endif /* __ASM_ARCH_OMAP44XX_H */ -- cgit v1.2.3-58-ga151 From bfe1f6acb0df957e513b7c71c3f1a7ac56b32e4d Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:18 -0800 Subject: omap: mailbox: remove sequence bit checking Any protocol should be handled in the upper layer and mailbox driver shouldn't care about the contents of messages. Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 70 +++----------------------------------------- 1 file changed, 4 insertions(+), 66 deletions(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 734bff332c82..f82810eeb3f4 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -28,54 +28,9 @@ #include -static int enable_seq_bit; -module_param(enable_seq_bit, bool, 0); -MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking."); - static struct omap_mbox *mboxes; static DEFINE_RWLOCK(mboxes_lock); -/* - * Mailbox sequence bit API - */ - -/* seq_rcv should be initialized with any value other than - * 0 and 1 << 31, to allow either value for the first - * message. */ -static inline void mbox_seq_init(struct omap_mbox *mbox) -{ - if (!enable_seq_bit) - return; - - /* any value other than 0 and 1 << 31 */ - mbox->seq_rcv = 0xffffffff; -} - -static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg) -{ - if (!enable_seq_bit) - return; - - /* add seq_snd to msg */ - *msg = (*msg & 0x7fffffff) | mbox->seq_snd; - /* flip seq_snd */ - mbox->seq_snd ^= 1 << 31; -} - -static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox_msg_t seq; - - if (!enable_seq_bit) - return 0; - - seq = msg & (1 << 31); - if (seq == mbox->seq_rcv) - return -1; - mbox->seq_rcv = seq; - return 0; -} - /* Mailbox FIFO handle functions */ static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) { @@ -113,13 +68,6 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) return mbox->ops->is_irq(mbox, irq); } -/* Mailbox Sequence Bit function */ -void omap_mbox_init_seq(struct omap_mbox *mbox) -{ - mbox_seq_init(mbox); -} -EXPORT_SYMBOL(omap_mbox_init_seq); - /* * message sender */ @@ -141,7 +89,6 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg) goto out; } - mbox_seq_toggle(mbox, &msg); mbox_fifo_write(mbox, msg); out: return ret; @@ -254,11 +201,11 @@ static void mbox_rx_work(struct work_struct *work) /* * Mailbox interrupt handler */ -static void mbox_txq_fn(struct request_queue * q) +static void mbox_txq_fn(struct request_queue *q) { } -static void mbox_rxq_fn(struct request_queue * q) +static void mbox_rxq_fn(struct request_queue *q) { } @@ -284,11 +231,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) msg = mbox_fifo_read(mbox); - if (unlikely(mbox_seq_test(mbox, msg))) { - pr_info("mbox: Illegal seq bit!(%08x)\n", msg); - if (mbox->err_notify) - mbox->err_notify(); - } blk_insert_request(q, rq, 0, (void *)msg); if (mbox->ops->type == OMAP_MBOX_TYPE1) @@ -320,7 +262,7 @@ static irqreturn_t mbox_interrupt(int irq, void *p) */ static ssize_t omap_mbox_write(struct device *dev, struct device_attribute *attr, - const char * buf, size_t count) + const char *buf, size_t count) { int ret; mbox_msg_t *p = (mbox_msg_t *)buf; @@ -357,10 +299,6 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf) blk_end_request_all(rq, 0); - if (unlikely(mbox_seq_test(mbox, *p))) { - pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p); - continue; - } p++; } @@ -383,7 +321,7 @@ static struct class omap_mbox_class = { }; static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, - request_fn_proc * proc, + request_fn_proc *proc, void (*work) (struct work_struct *)) { struct request_queue *q; -- cgit v1.2.3-58-ga151 From c7c158e57bce6220644f2bcd65d82e1468aa40ec Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:19 -0800 Subject: omap: mailbox: remove class interface It's not used at present. Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mailbox.h | 1 - arch/arm/plat-omap/mailbox.c | 115 +++--------------------------- 2 files changed, 9 insertions(+), 107 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index b7a6991814ec..319306a8f44a 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -8,7 +8,6 @@ #include typedef u32 mbox_msg_t; -typedef void (mbox_receiver_t)(mbox_msg_t msg); struct omap_mbox; typedef int __bitwise omap_mbox_irq_t; diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index f82810eeb3f4..13ca2365f279 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -71,7 +71,7 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) /* * message sender */ -static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg) +static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) { int ret = 0, i = 1000; @@ -82,15 +82,7 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg) return -1; udelay(1); } - - if (arg && mbox->txq->callback) { - ret = mbox->txq->callback(arg); - if (ret) - goto out; - } - mbox_fifo_write(mbox, msg); - out: return ret; } @@ -152,7 +144,7 @@ static void mbox_tx_work(struct work_struct *work) tx_data = rq->special; - ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg); + ret = __mbox_msg_send(mbox, tx_data->msg); if (ret) { enable_mbox_irq(mbox, IRQ_TX); spin_lock(q->queue_lock); @@ -180,11 +172,6 @@ static void mbox_rx_work(struct work_struct *work) mbox_msg_t msg; unsigned long flags; - if (mbox->rxq->callback == NULL) { - sysfs_notify(&mbox->dev->kobj, NULL, "mbox"); - return; - } - while (1) { spin_lock_irqsave(q->queue_lock, flags); rq = blk_fetch_request(q); @@ -257,69 +244,6 @@ static irqreturn_t mbox_interrupt(int irq, void *p) return IRQ_HANDLED; } -/* - * sysfs files - */ -static ssize_t -omap_mbox_write(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - int ret; - mbox_msg_t *p = (mbox_msg_t *)buf; - struct omap_mbox *mbox = dev_get_drvdata(dev); - - for (; count >= sizeof(mbox_msg_t); count -= sizeof(mbox_msg_t)) { - ret = omap_mbox_msg_send(mbox, be32_to_cpu(*p), NULL); - if (ret) - return -EAGAIN; - p++; - } - - return (size_t)((char *)p - buf); -} - -static ssize_t -omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf) -{ - unsigned long flags; - struct request *rq; - mbox_msg_t *p = (mbox_msg_t *) buf; - struct omap_mbox *mbox = dev_get_drvdata(dev); - struct request_queue *q = mbox->rxq->queue; - - while (1) { - spin_lock_irqsave(q->queue_lock, flags); - rq = blk_fetch_request(q); - spin_unlock_irqrestore(q->queue_lock, flags); - - if (!rq) - break; - - *p = (mbox_msg_t)rq->special; - - blk_end_request_all(rq, 0); - - p++; - } - - pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]); - - return (size_t) ((char *)p - buf); -} - -static DEVICE_ATTR(mbox, S_IRUGO | S_IWUSR, omap_mbox_read, omap_mbox_write); - -static ssize_t mbox_show(struct class *class, char *buf) -{ - return sprintf(buf, "mbox"); -} - -static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL); - -static struct class omap_mbox_class = { - .name = "omap-mailbox", -}; - static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, request_fn_proc *proc, void (*work) (struct work_struct *)) @@ -353,7 +277,7 @@ static void mbox_queue_free(struct omap_mbox_queue *q) kfree(q); } -static int omap_mbox_init(struct omap_mbox *mbox) +static int omap_mbox_startup(struct omap_mbox *mbox) { int ret; struct omap_mbox_queue *mq; @@ -436,7 +360,7 @@ struct omap_mbox *omap_mbox_get(const char *name) read_unlock(&mboxes_lock); - ret = omap_mbox_init(mbox); + ret = omap_mbox_startup(mbox); if (ret) return ERR_PTR(-ENODEV); @@ -460,15 +384,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox) if (mbox->next) return -EBUSY; - mbox->dev = device_create(&omap_mbox_class, - parent, 0, mbox, "%s", mbox->name); - if (IS_ERR(mbox->dev)) - return PTR_ERR(mbox->dev); - - ret = device_create_file(mbox->dev, &dev_attr_mbox); - if (ret) - goto err_sysfs; - write_lock(&mboxes_lock); tmp = find_mboxes(mbox->name); if (*tmp) { @@ -482,9 +397,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox) return 0; err_find: - device_remove_file(mbox->dev, &dev_attr_mbox); -err_sysfs: - device_unregister(mbox->dev); return ret; } EXPORT_SYMBOL(omap_mbox_register); @@ -500,8 +412,6 @@ int omap_mbox_unregister(struct omap_mbox *mbox) *tmp = mbox->next; mbox->next = NULL; write_unlock(&mboxes_lock); - device_remove_file(mbox->dev, &dev_attr_mbox); - device_unregister(mbox->dev); return 0; } tmp = &(*tmp)->next; @@ -512,23 +422,16 @@ int omap_mbox_unregister(struct omap_mbox *mbox) } EXPORT_SYMBOL(omap_mbox_unregister); -static int __init omap_mbox_class_init(void) +static int __init omap_mbox_init(void) { - int ret = class_register(&omap_mbox_class); - if (!ret) - ret = class_create_file(&omap_mbox_class, &class_attr_mbox); - - return ret; + return 0; } +module_init(omap_mbox_init); -static void __exit omap_mbox_class_exit(void) +static void __exit omap_mbox_exit(void) { - class_remove_file(&omap_mbox_class, &class_attr_mbox); - class_unregister(&omap_mbox_class); } - -subsys_initcall(omap_mbox_class_init); -module_exit(omap_mbox_class_exit); +module_exit(omap_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); -- cgit v1.2.3-58-ga151 From 2775e467ff4c60a4b3745b24bb2f75c92a3ecc69 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:20 -0800 Subject: omap: mailbox: remove disable_/enable_mbox_irq in isr No need to handle it in isr, since irq won't happen during isr. Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 13ca2365f279..b49bb291c678 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -209,8 +209,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) mbox_msg_t msg; struct request_queue *q = mbox->rxq->queue; - disable_mbox_irq(mbox, IRQ_RX); - while (!mbox_fifo_empty(mbox)) { rq = blk_get_request(q, WRITE, GFP_ATOMIC); if (unlikely(!rq)) @@ -226,7 +224,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) /* no more messages in the fifo. clear IRQ source. */ ack_mbox_irq(mbox, IRQ_RX); - enable_mbox_irq(mbox, IRQ_RX); nomem: schedule_work(&mbox->rxq->work); } -- cgit v1.2.3-58-ga151 From b2b6362e6c5f744776da633218029e99f1244694 Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:20 -0800 Subject: omap: mailbox: remove unnecessary arg for omap_mbox_msg_send Also removed from tx_data Signed-off-by: C A Subramaniam Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mailbox.h | 2 +- arch/arm/plat-omap/mailbox.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index 319306a8f44a..8260a3feeb6f 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -63,7 +63,7 @@ struct omap_mbox { void (*err_notify)(void); }; -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); +int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); void omap_mbox_init_seq(struct omap_mbox *); struct omap_mbox *omap_mbox_get(const char *); diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index b49bb291c678..99ecf8037ddf 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -88,7 +88,6 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) struct omap_msg_tx_data { mbox_msg_t msg; - void *arg; }; static void omap_msg_tx_end_io(struct request *rq, int error) @@ -97,7 +96,7 @@ static void omap_msg_tx_end_io(struct request *rq, int error) __blk_put_request(rq->q, rq); } -int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg) +int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) { struct omap_msg_tx_data *tx_data; struct request *rq; @@ -114,7 +113,6 @@ int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg) } tx_data->msg = msg; - tx_data->arg = arg; rq->end_io = omap_msg_tx_end_io; blk_insert_request(q, rq, 0, tx_data); -- cgit v1.2.3-58-ga151 From eb18858ebda7f4ef3d7de33e1b9bf11ac4cc137b Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sun, 22 Nov 2009 10:11:22 -0800 Subject: omap: mailbox: Expose omap_mbox_enable()/disable_irq() Expose omap_mbox_enable()/disable_irq() Signed-off-by: Hiroshi DOYU --- arch/arm/plat-omap/include/plat/mailbox.h | 12 ++++++++++++ arch/arm/plat-omap/mailbox.c | 12 ++---------- 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index 8260a3feeb6f..bf0695310bde 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -92,4 +92,16 @@ static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) mbox->ops->restore_ctx(mbox); } +static inline void omap_mbox_enable_irq(struct omap_mbox *mbox, + omap_mbox_irq_t irq) +{ + mbox->ops->enable_irq(mbox, irq); +} + +static inline void omap_mbox_disable_irq(struct omap_mbox *mbox, + omap_mbox_irq_t irq) +{ + mbox->ops->disable_irq(mbox, irq); +} + #endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 99ecf8037ddf..e6b31159f08b 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -50,14 +50,6 @@ static inline int mbox_fifo_full(struct omap_mbox *mbox) } /* Mailbox IRQ handle functions */ -static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - mbox->ops->enable_irq(mbox, irq); -} -static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - mbox->ops->disable_irq(mbox, irq); -} static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { if (mbox->ops->ack_irq) @@ -144,7 +136,7 @@ static void mbox_tx_work(struct work_struct *work) ret = __mbox_msg_send(mbox, tx_data->msg); if (ret) { - enable_mbox_irq(mbox, IRQ_TX); + omap_mbox_enable_irq(mbox, IRQ_TX); spin_lock(q->queue_lock); blk_requeue_request(q, rq); spin_unlock(q->queue_lock); @@ -196,7 +188,7 @@ static void mbox_rxq_fn(struct request_queue *q) static void __mbox_tx_interrupt(struct omap_mbox *mbox) { - disable_mbox_irq(mbox, IRQ_TX); + omap_mbox_disable_irq(mbox, IRQ_TX); ack_mbox_irq(mbox, IRQ_TX); schedule_work(&mbox->txq->work); } -- cgit v1.2.3-58-ga151 From 5f00ec64a38563f1e5d8a852f2279047edecd0b8 Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:22 -0800 Subject: omap: mailbox: Adds code changes to support OMAP4 mailbox This patch adds code changes in the mailbox driver module to add support for OMAP4 mailbox. Signed-off-by: Hari Kanigeri Signed-off-by: C A Subramaniam Signed-off-by: Ramesh Gupta G Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mailbox.c | 140 ++++++++++++++++++++++++++++++++++-------- arch/arm/plat-omap/mailbox.c | 25 ++++++-- 2 files changed, 136 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 5ba3aa69465e..281ab6342448 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -18,6 +18,8 @@ #include #include +#define DRV_NAME "omap2-mailbox" + #define MAILBOX_REVISION 0x000 #define MAILBOX_SYSCONFIG 0x010 #define MAILBOX_SYSSTATUS 0x014 @@ -27,8 +29,12 @@ #define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) #define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) -#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u))) -#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1)) +#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 10 * (u)) +#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 10 * (u)) +#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 10 * (u)) + +#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) +#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) /* SYSCONFIG: register bit definition */ #define AUTOIDLE (1 << 0) @@ -39,7 +45,11 @@ #define RESETDONE (1 << 0) #define MBOX_REG_SIZE 0x120 + +#define OMAP4_MBOX_REG_SIZE 0x130 + #define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) +#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32)) static void __iomem *mbox_base; @@ -56,7 +66,8 @@ struct omap_mbox2_priv { unsigned long irqstatus; u32 newmsg_bit; u32 notfull_bit; - u32 ctx[MBOX_NR_REGS]; + u32 ctx[OMAP4_MBOX_NR_REGS]; + unsigned long irqdisable; }; static struct clk *mbox_ick_handle; @@ -82,8 +93,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) mbox_ick_handle = clk_get(NULL, "mailboxes_ick"); if (IS_ERR(mbox_ick_handle)) { - pr_err("Can't get mailboxes_ick\n"); - return -ENODEV; + printk(KERN_ERR "Could not get mailboxes_ick: %d\n", + PTR_ERR(mbox_ick_handle)); + return PTR_ERR(mbox_ick_handle); } clk_enable(mbox_ick_handle); @@ -115,6 +127,7 @@ static void omap2_mbox_shutdown(struct omap_mbox *mbox) { clk_disable(mbox_ick_handle); clk_put(mbox_ick_handle); + mbox_ick_handle = NULL; } /* Mailbox FIFO handle functions */ @@ -143,7 +156,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox) { struct omap_mbox2_fifo *fifo = &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - return (mbox_read_reg(fifo->fifo_stat)); + return mbox_read_reg(fifo->fifo_stat); } /* Mailbox IRQ handle functions */ @@ -163,10 +176,9 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox, { struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - l = mbox_read_reg(p->irqenable); + l = mbox_read_reg(p->irqdisable); l &= ~bit; - mbox_write_reg(l, p->irqenable); + mbox_write_reg(l, p->irqdisable); } static void omap2_mbox_ack_irq(struct omap_mbox *mbox, @@ -189,15 +201,19 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox, u32 enable = mbox_read_reg(p->irqenable); u32 status = mbox_read_reg(p->irqstatus); - return (enable & status & bit); + return (int)(enable & status & bit); } static void omap2_mbox_save_ctx(struct omap_mbox *mbox) { int i; struct omap_mbox2_priv *p = mbox->priv; - - for (i = 0; i < MBOX_NR_REGS; i++) { + int nr_regs; + if (cpu_is_omap44xx()) + nr_regs = OMAP4_MBOX_NR_REGS; + else + nr_regs = MBOX_NR_REGS; + for (i = 0; i < nr_regs; i++) { p->ctx[i] = mbox_read_reg(i * sizeof(u32)); dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, @@ -209,8 +225,12 @@ static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) { int i; struct omap_mbox2_priv *p = mbox->priv; - - for (i = 0; i < MBOX_NR_REGS; i++) { + int nr_regs; + if (cpu_is_omap44xx()) + nr_regs = OMAP4_MBOX_NR_REGS; + else + nr_regs = MBOX_NR_REGS; + for (i = 0; i < nr_regs; i++) { mbox_write_reg(p->ctx[i], i * sizeof(u32)); dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, @@ -242,7 +262,6 @@ static struct omap_mbox_ops omap2_mbox_ops = { */ /* FIXME: the following structs should be filled automatically by the user id */ - /* DSP */ static struct omap_mbox2_priv omap2_mbox_dsp_priv = { .tx_fifo = { @@ -257,8 +276,36 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = { .irqstatus = MAILBOX_IRQSTATUS(0), .notfull_bit = MAILBOX_IRQ_NOTFULL(0), .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), + .irqdisable = MAILBOX_IRQENABLE(0), +}; + + + +/* OMAP4 specific data structure. Use the cpu_is_omap4xxx() +to use this*/ +static struct omap_mbox2_priv omap2_mbox_1_priv = { + .tx_fifo = { + .msg = MAILBOX_MESSAGE(0), + .fifo_stat = MAILBOX_FIFOSTATUS(0), + }, + .rx_fifo = { + .msg = MAILBOX_MESSAGE(1), + .msg_stat = MAILBOX_MSGSTATUS(1), + }, + .irqenable = OMAP4_MAILBOX_IRQENABLE(0), + .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), + .notfull_bit = MAILBOX_IRQ_NOTFULL(0), + .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), + .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), }; +struct omap_mbox mbox_1_info = { + .name = "mailbox-1", + .ops = &omap2_mbox_ops, + .priv = &omap2_mbox_1_priv, +}; +EXPORT_SYMBOL(mbox_1_info); + struct omap_mbox mbox_dsp_info = { .name = "dsp", .ops = &omap2_mbox_ops, @@ -266,6 +313,30 @@ struct omap_mbox mbox_dsp_info = { }; EXPORT_SYMBOL(mbox_dsp_info); +static struct omap_mbox2_priv omap2_mbox_2_priv = { + .tx_fifo = { + .msg = MAILBOX_MESSAGE(3), + .fifo_stat = MAILBOX_FIFOSTATUS(3), + }, + .rx_fifo = { + .msg = MAILBOX_MESSAGE(2), + .msg_stat = MAILBOX_MSGSTATUS(2), + }, + .irqenable = OMAP4_MAILBOX_IRQENABLE(0), + .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), + .notfull_bit = MAILBOX_IRQ_NOTFULL(3), + .newmsg_bit = MAILBOX_IRQ_NEWMSG(2), + .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), +}; + +struct omap_mbox mbox_2_info = { + .name = "mailbox-2", + .ops = &omap2_mbox_ops, + .priv = &omap2_mbox_2_priv, +}; +EXPORT_SYMBOL(mbox_2_info); + + #if defined(CONFIG_ARCH_OMAP2420) /* IVA */ static struct omap_mbox2_priv omap2_mbox_iva_priv = { .tx_fifo = { @@ -280,6 +351,7 @@ static struct omap_mbox2_priv omap2_mbox_iva_priv = { .irqstatus = MAILBOX_IRQSTATUS(3), .notfull_bit = MAILBOX_IRQ_NOTFULL(2), .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), + .irqdisable = MAILBOX_IRQENABLE(3), }; static struct omap_mbox mbox_iva_info = { @@ -305,17 +377,31 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - ret = platform_get_irq(pdev, 0); - if (ret < 0) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (unlikely(!res)) { dev_err(&pdev->dev, "invalid irq resource\n"); + ret = -ENODEV; goto err_dsp; } - mbox_dsp_info.irq = ret; - - ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); + if (cpu_is_omap44xx()) { + mbox_1_info.irq = res->start; + ret = omap_mbox_register(&pdev->dev, &mbox_1_info); + } else { + mbox_dsp_info.irq = res->start; + ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); + } if (ret) goto err_dsp; + if (cpu_is_omap44xx()) { + mbox_2_info.irq = res->start; + ret = omap_mbox_register(&pdev->dev, &mbox_2_info); + if (ret) { + omap_mbox_unregister(&mbox_1_info); + goto err_dsp; + } + } #if defined(CONFIG_ARCH_OMAP2420) /* IVA */ if (cpu_is_omap2420()) { /* IVA IRQ */ @@ -335,6 +421,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) err_iva1: omap_mbox_unregister(&mbox_dsp_info); + err_dsp: iounmap(mbox_base); return ret; @@ -345,7 +432,12 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev) #if defined(CONFIG_ARCH_OMAP2420) omap_mbox_unregister(&mbox_iva_info); #endif - omap_mbox_unregister(&mbox_dsp_info); + + if (cpu_is_omap44xx()) { + omap_mbox_unregister(&mbox_2_info); + omap_mbox_unregister(&mbox_1_info); + } else + omap_mbox_unregister(&mbox_dsp_info); iounmap(mbox_base); return 0; } @@ -354,7 +446,7 @@ static struct platform_driver omap2_mbox_driver = { .probe = omap2_mbox_probe, .remove = __devexit_p(omap2_mbox_remove), .driver = { - .name = "omap2-mailbox", + .name = DRV_NAME, }, }; @@ -372,6 +464,6 @@ module_init(omap2_mbox_init); module_exit(omap2_mbox_exit); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions"); +MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); MODULE_AUTHOR("Hiroshi DOYU , Paul Mundt"); -MODULE_ALIAS("platform:omap2-mailbox"); +MODULE_ALIAS("platform:"DRV_NAME); diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index e6b31159f08b..2210c45a52f1 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -31,6 +31,8 @@ static struct omap_mbox *mboxes; static DEFINE_RWLOCK(mboxes_lock); +static int mbox_configured; + /* Mailbox FIFO handle functions */ static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) { @@ -266,13 +268,20 @@ static void mbox_queue_free(struct omap_mbox_queue *q) static int omap_mbox_startup(struct omap_mbox *mbox) { - int ret; + int ret = 0; struct omap_mbox_queue *mq; if (likely(mbox->ops->startup)) { - ret = mbox->ops->startup(mbox); - if (unlikely(ret)) + write_lock(&mboxes_lock); + if (!mbox_configured) + ret = mbox->ops->startup(mbox); + + if (unlikely(ret)) { + write_unlock(&mboxes_lock); return ret; + } + mbox_configured++; + write_unlock(&mboxes_lock); } ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED, @@ -317,8 +326,14 @@ static void omap_mbox_fini(struct omap_mbox *mbox) free_irq(mbox->irq, mbox); - if (unlikely(mbox->ops->shutdown)) - mbox->ops->shutdown(mbox); + if (unlikely(mbox->ops->shutdown)) { + write_lock(&mboxes_lock); + if (mbox_configured > 0) + mbox_configured--; + if (!mbox_configured) + mbox->ops->shutdown(mbox); + write_unlock(&mboxes_lock); + } } static struct omap_mbox **find_mboxes(const char *name) -- cgit v1.2.3-58-ga151 From 5e68382592adba993dad6b59655b7ff51a6ed049 Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:23 -0800 Subject: omap: mailbox: OMAP4 Mailbox Patch to change the IRQ flag from IRQF_DISABLED to IRQF_SHARED Currently, this facilitates both the tesla and ducati sides to request for the same irq through an omap_mbox_get() call. Signed-off-by: C A Subramaniam Signed-off-by: Ramesh Gupta G Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 2210c45a52f1..4d7947e5dd95 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -284,7 +284,7 @@ static int omap_mbox_startup(struct omap_mbox *mbox) write_unlock(&mboxes_lock); } - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED, + ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, mbox->name, mbox); if (unlikely(ret)) { printk(KERN_ERR -- cgit v1.2.3-58-ga151 From 5ed8d32ea39d34dbfea50ada1bee0a33513fc6f3 Mon Sep 17 00:00:00 2001 From: C A Subramaniam Date: Sun, 22 Nov 2009 10:11:24 -0800 Subject: omap: mailbox: OMAP4 Mailbox-driver Patch to support tasklet implementation This patch uses a tasklet implementation for sending mailbox messages. Signed-off-by: C A Subramaniam Signed-off-by: Ramesh Gupta G Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mailbox.h | 8 +++-- arch/arm/plat-omap/mailbox.c | 59 +++++++++---------------------- 2 files changed, 23 insertions(+), 44 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index bf0695310bde..729166b76a7c 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -6,6 +6,7 @@ #include #include #include +#include typedef u32 mbox_msg_t; struct omap_mbox; @@ -28,8 +29,10 @@ struct omap_mbox_ops { int (*fifo_empty)(struct omap_mbox *mbox); int (*fifo_full)(struct omap_mbox *mbox); /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + void (*enable_irq)(struct omap_mbox *mbox, + omap_mbox_irq_t irq); + void (*disable_irq)(struct omap_mbox *mbox, + omap_mbox_irq_t irq); void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); /* ctx */ @@ -41,6 +44,7 @@ struct omap_mbox_queue { spinlock_t lock; struct request_queue *queue; struct work_struct work; + struct tasklet_struct tasklet; int (*callback)(void *); struct omap_mbox *mbox; }; diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 4d7947e5dd95..8e90633e4cb9 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -80,74 +80,45 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) return ret; } -struct omap_msg_tx_data { - mbox_msg_t msg; -}; - -static void omap_msg_tx_end_io(struct request *rq, int error) -{ - kfree(rq->special); - __blk_put_request(rq->q, rq); -} int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) { - struct omap_msg_tx_data *tx_data; + struct request *rq; struct request_queue *q = mbox->txq->queue; - tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC); - if (unlikely(!tx_data)) - return -ENOMEM; - rq = blk_get_request(q, WRITE, GFP_ATOMIC); - if (unlikely(!rq)) { - kfree(tx_data); + if (unlikely(!rq)) return -ENOMEM; - } - tx_data->msg = msg; - rq->end_io = omap_msg_tx_end_io; - blk_insert_request(q, rq, 0, tx_data); + blk_insert_request(q, rq, 0, (void *) msg); + tasklet_schedule(&mbox->txq->tasklet); - schedule_work(&mbox->txq->work); return 0; } EXPORT_SYMBOL(omap_mbox_msg_send); -static void mbox_tx_work(struct work_struct *work) +static void mbox_tx_tasklet(unsigned long tx_data) { int ret; struct request *rq; - struct omap_mbox_queue *mq = container_of(work, - struct omap_mbox_queue, work); - struct omap_mbox *mbox = mq->queue->queuedata; + struct omap_mbox *mbox = (struct omap_mbox *)tx_data; struct request_queue *q = mbox->txq->queue; while (1) { - struct omap_msg_tx_data *tx_data; - spin_lock(q->queue_lock); rq = blk_fetch_request(q); - spin_unlock(q->queue_lock); if (!rq) break; - tx_data = rq->special; - - ret = __mbox_msg_send(mbox, tx_data->msg); + ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special); if (ret) { omap_mbox_enable_irq(mbox, IRQ_TX); - spin_lock(q->queue_lock); blk_requeue_request(q, rq); - spin_unlock(q->queue_lock); return; } - - spin_lock(q->queue_lock); - __blk_end_request_all(rq, 0); - spin_unlock(q->queue_lock); + blk_end_request_all(rq, 0); } } @@ -192,7 +163,7 @@ static void __mbox_tx_interrupt(struct omap_mbox *mbox) { omap_mbox_disable_irq(mbox, IRQ_TX); ack_mbox_irq(mbox, IRQ_TX); - schedule_work(&mbox->txq->work); + tasklet_schedule(&mbox->txq->tasklet); } static void __mbox_rx_interrupt(struct omap_mbox *mbox) @@ -235,7 +206,8 @@ static irqreturn_t mbox_interrupt(int irq, void *p) static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, request_fn_proc *proc, - void (*work) (struct work_struct *)) + void (*work) (struct work_struct *), + void (*tasklet)(unsigned long)) { struct request_queue *q; struct omap_mbox_queue *mq; @@ -252,8 +224,11 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, q->queuedata = mbox; mq->queue = q; - INIT_WORK(&mq->work, work); + if (work) + INIT_WORK(&mq->work, work); + if (tasklet) + tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox); return mq; error: kfree(mq); @@ -292,14 +267,14 @@ static int omap_mbox_startup(struct omap_mbox *mbox) goto fail_request_irq; } - mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work); + mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet); if (!mq) { ret = -ENOMEM; goto fail_alloc_txq; } mbox->txq = mq; - mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work); + mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL); if (!mq) { ret = -ENOMEM; goto fail_alloc_rxq; -- cgit v1.2.3-58-ga151 From edeae658b282f2d076efb3b3f39ccd8eb0c384fa Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 22 Nov 2009 10:11:24 -0800 Subject: omap: Cleanup the coding style in id.c Cleanup the coding style in id.c while avoiding unneeded switch() statements. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 61 +++++++++++++++++------------------------------- 1 file changed, 21 insertions(+), 40 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 49846601fe77..f48a4b2654dd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -53,11 +53,11 @@ int omap_type(void) { u32 val = 0; - if (cpu_is_omap24xx()) + if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - else if (cpu_is_omap34xx()) + } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); - else { + } else { pr_err("Cannot detect omap type!\n"); goto out; } @@ -224,24 +224,12 @@ void __init omap3_check_revision(void) omap_revision = OMAP3430_REV_ES3_0; break; case 4: - omap_revision = OMAP3430_REV_ES3_1; - break; + /* FALLTHROUGH */ default: /* Use the latest known revision as default */ omap_revision = OMAP3430_REV_ES3_1; } break; - case 0xb891: - /* Handle 36xx devices */ - switch (rev) { - case 0: - omap_revision = OMAP3630_REV_ES1_0; - break; - default: - /* Use the latest known revision as default */ - omap_revision = OMAP3630_REV_ES1_0; - } - break; case 0xb868: /* Handle OMAP35xx/AM35xx devices * @@ -250,6 +238,8 @@ void __init omap3_check_revision(void) */ omap_revision = OMAP3505_REV(rev); break; + case 0xb891: + /* FALLTHROUGH */ default: /* Unknown default to latest silicon rev as default*/ omap_revision = OMAP3630_REV_ES1_0; @@ -271,35 +261,29 @@ void __init omap3_cpuinfo(void) * on available features. Upon detection, update the CPU id * and CPU class bits. */ - if (cpu_is_omap3630()) + if (cpu_is_omap3630()) { strcpy(cpu_name, "OMAP3630"); - else if (cpu_is_omap3505()) { + } else if (cpu_is_omap3505()) { /* * AM35xx devices */ if (omap3_has_sgx()) { omap_revision = OMAP3517_REV(rev); strcpy(cpu_name, "AM3517"); - } - else { + } else { /* Already set in omap3_check_revision() */ strcpy(cpu_name, "AM3505"); } - } - /* - * OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices - */ - else if (omap3_has_iva() && omap3_has_sgx()) + } else if (omap3_has_iva() && omap3_has_sgx()) { + /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - else if (omap3_has_sgx()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } - else if (omap3_has_iva()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); - } - else { + } else { omap_revision = OMAP3503_REV(rev); strcpy(cpu_name, "OMAP3503"); } @@ -318,16 +302,13 @@ void __init omap3_cpuinfo(void) strcpy(cpu_rev, "3.0"); break; case OMAP_REVBITS_40: - strcpy(cpu_rev, "3.1"); - break; + /* FALLTHROUGH */ default: /* Use the latest known revision as default */ strcpy(cpu_rev, "3.1"); } - /* - * Print verbose information - */ + /* Print verbose information */ pr_info("%s ES%s (", cpu_name, cpu_rev); OMAP3_SHOW_FEATURE(l2cache); @@ -348,18 +329,18 @@ void __init omap2_check_revision(void) * At this point we have an idea about the processor revision set * earlier with omap2_set_globals_tap(). */ - if (cpu_is_omap24xx()) + if (cpu_is_omap24xx()) { omap24xx_check_revision(); - else if (cpu_is_omap34xx()) { + } else if (cpu_is_omap34xx()) { omap3_check_revision(); omap3_check_features(); omap3_cpuinfo(); - } - else if (cpu_is_omap44xx()) { + } else if (cpu_is_omap44xx()) { printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); return; - } else + } else { pr_err("OMAP revision unknown, please fix!\n"); + } /* * OK, now we know the exact revision. Initialize omap_chip bits -- cgit v1.2.3-58-ga151 From 058af1ea98675a672ad2aefca035d2e5a228d2cc Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Sun, 22 Nov 2009 10:11:25 -0800 Subject: omap: GPIO module enable/disable This patch disables a GPIO module when all pins of a GPIO module are inactive (clock gating forced at module level) and enables the module when any gpio in the module is requested. The module is enabled only when "mod_usage" indicates that no GPIO in that module is currently active and the GPIO being requested is the 1st one to be active in that module. Each module would be disabled in omap_gpio_free() API when all GPIOs in a particular module becomes inactive. The module is re-enabled in omap_gpio_request() API when a GPIO is requested from the module that was previously disabled. Since individual GPIO's bookkeeping is added in this patch via "mod_usage", the same is used in omap_set_gpio_debounce() & omap_set_gpio_debounce_time() APIs to ensure that the gpio being used is actually "requested" prior to being used (Nishant Menon's Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 4f81ea35b733..055160e0620e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -195,6 +195,7 @@ struct gpio_bank { spinlock_t lock; struct gpio_chip chip; struct clk *dbck; + u32 mod_usage; }; #define METHOD_MPUIO 0 @@ -628,6 +629,10 @@ void omap_set_gpio_debounce(int gpio, int enable) #else reg += OMAP24XX_GPIO_DEBOUNCE_EN; #endif + if (!(bank->mod_usage & l)) { + printk(KERN_ERR "GPIO %d not requested\n", gpio); + return; + } spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); @@ -663,6 +668,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) bank = get_gpio_bank(gpio); reg = bank->base; + if (!bank->mod_usage) { + printk(KERN_ERR "GPIO not requested\n"); + return; + } + enc_time &= 0xff; #ifdef CONFIG_ARCH_OMAP4 reg += OMAP4_GPIO_DEBOUNCINGTIME; @@ -1144,6 +1154,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) __raw_writel(__raw_readl(reg) | (1 << offset), reg); } #endif + if (!cpu_class_is_omap1()) { + if (!bank->mod_usage) { + u32 ctrl; + ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + ctrl &= 0xFFFFFFFE; + /* Module is enabled, clocks are not gated */ + __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + } + bank->mod_usage |= 1 << offset; + } spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -1170,6 +1190,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif + if (!cpu_class_is_omap1()) { + bank->mod_usage &= ~(1 << offset); + if (!bank->mod_usage) { + u32 ctrl; + ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + /* Module is disabled, clocks are gated */ + ctrl |= 1; + __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + } + } _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); } @@ -1749,6 +1779,8 @@ static int __init _omap_gpio_init(void) gpio_count = 32; } #endif + + bank->mod_usage = 0; /* REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones */ -- cgit v1.2.3-58-ga151 From 6502401d8169f76c6a72849cb55e8302226ca930 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:26 -0800 Subject: omap3: defconfigs: remove SYSFS_DEPRECATED flag Remove the SYSFS_DEPRECATED flag from OMAP3 board defconfigs This is a deprecated feature no longer needed. Signed-off-by: Vikram Pandita Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_beagle_defconfig | 4 ++-- arch/arm/configs/omap3_evm_defconfig | 4 ++-- arch/arm/configs/omap3_pandora_defconfig | 5 +++-- arch/arm/configs/omap_3430sdp_defconfig | 4 ++-- arch/arm/configs/omap_4430sdp_defconfig | 4 ++-- arch/arm/configs/omap_ldp_defconfig | 4 ++-- arch/arm/configs/omap_zoom2_defconfig | 4 ++-- arch/arm/configs/overo_defconfig | 4 ++-- 8 files changed, 17 insertions(+), 16 deletions(-) diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index b3c8cce0f8fb..9cfae374e041 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -52,8 +52,8 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 36c99e09c8ce..180bf9fb3ecc 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index 150deafb0a6a..b7a8d9fa49db 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -51,8 +51,9 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set + # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 5a305f015307..c39dbfc7ffdc 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -61,8 +61,8 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index 23e43ea4efa1..a464ca332a23 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -52,8 +52,8 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index b9c48919a68c..9139532c3be7 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -49,8 +49,8 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index f1739fae7ed4..a32d126fc510 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig index a57f9e4124fa..b3ea2c4c0f91 100644 --- a/arch/arm/configs/overo_defconfig +++ b/arch/arm/configs/overo_defconfig @@ -54,8 +54,8 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED=y is not set +# CONFIG_SYSFS_DEPRECATED_V2=y is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y -- cgit v1.2.3-58-ga151 From 50a1f7bfea7ba9330f984ecb7d35aeb93d326cc3 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Sun, 22 Nov 2009 10:11:27 -0800 Subject: omap3: Update 3430SDP defconfig The mainline merge of the 3430SDP support (commit 6fdc29e2) seems to have messed up the 3430 defconfig completely. Update the defconfig using a known good version (SDP defconfig from v2.6.26-omap2 and current beagle defconfig) as reference. The image size is now 1.9 MB down from 2.4 MB earlier, and the number of modules is 8, down from 203. Build time also scales proportionally. Other support (OneNAND, etc) can be enabled as needed. Note that this patch intentionally does not update CONFIG_FB related options to avoid merge conflicts with the pending omap_dss2 patches. Signed-off-by: Anand Gadiyar Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_3430sdp_defconfig | 994 ++++++++++---------------------- 1 file changed, 298 insertions(+), 696 deletions(-) diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index c39dbfc7ffdc..84829587d55a 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-omap1 -# Tue Jun 23 10:36:45 2009 +# Linux kernel version: 2.6.31-rc9-omap1 +# Tue Sep 15 16:48:34 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_OPROFILE_ARMV7=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -67,6 +64,9 @@ CONFIG_USER_SCHED=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -79,7 +79,7 @@ CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y -# CONFIG_ELF_CORE is not set +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -88,21 +88,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set # CONFIG_SLOB is not set -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y +# CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,12 +118,11 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -126,11 +133,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_FREEZER=y # @@ -142,12 +149,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,24 +165,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # TI OMAP Implementations @@ -182,17 +192,19 @@ CONFIG_ARCH_OMAP_OTG=y # CONFIG_ARCH_OMAP1 is not set # CONFIG_ARCH_OMAP2 is not set CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set # # OMAP Feature Selections # # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set -# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -200,7 +212,8 @@ CONFIG_OMAP_DM_TIMER=y CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set -CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y CONFIG_ARCH_OMAP34XX=y CONFIG_ARCH_OMAP3430=y @@ -210,8 +223,11 @@ CONFIG_ARCH_OMAP3430=y # CONFIG_MACH_OMAP3_BEAGLE is not set # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set # CONFIG_MACH_OMAP3_PANDORA is not set CONFIG_MACH_OMAP_3430SDP=y +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set # # Processor Type @@ -234,12 +250,15 @@ CONFIG_CPU_CP15_MMU=y # Processor Features # CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y +# CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y -# CONFIG_OUTER_CACHE is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -262,10 +281,10 @@ CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -277,9 +296,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_LEDS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -288,8 +310,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug" # CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y +# CONFIG_KEXEC is not set # # CPU Power Management @@ -318,6 +339,9 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y @@ -326,8 +350,9 @@ CONFIG_NEON=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y -CONFIG_BINFMT_AOUT=m +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y # @@ -345,9 +370,8 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y +# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -372,7 +396,7 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y @@ -383,25 +407,7 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set +# CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +425,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -429,56 +437,9 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -# CONFIG_BT_HCIBTUSB is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -CONFIG_CFG80211=y -# CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -CONFIG_LIB80211=y -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT="pid" -# CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -493,9 +454,7 @@ CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -506,7 +465,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -526,8 +485,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -538,6 +499,10 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -546,6 +511,9 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y # CONFIG_MTD_PLATRAM is not set # @@ -569,6 +537,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_OMAP2 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set @@ -589,20 +558,21 @@ CONFIG_MTD_NAND_IDS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set +# CONFIG_OMAP_STI is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -611,14 +581,15 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set -CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set @@ -632,12 +603,8 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -655,34 +622,18 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_DELAY=m -# CONFIG_DM_UEVENT is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_DUMMY=m +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=m +# CONFIG_TUN is not set # CONFIG_VETH is not set CONFIG_PHYLIB=y @@ -695,7 +646,7 @@ CONFIG_PHYLIB=y # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y +# CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set @@ -710,8 +661,10 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set -CONFIG_SMC911X=m -CONFIG_SMSC911X=m +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -720,33 +673,16 @@ CONFIG_SMSC911X=m # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_USB=y -CONFIG_LIBERTAS_SDIO=y -CONFIG_LIBERTAS_DEBUG=y -# CONFIG_LIBERTAS_THINFIRM is not set -CONFIG_USB_ZD1201=m -# CONFIG_USB_NET_RNDIS_WLAN is not set -CONFIG_RTL8187=m -# CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -# CONFIG_IWLWIFI_LEDS is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -# CONFIG_ZD1211RW is not set -# CONFIG_RT2X00 is not set +# CONFIG_WLAN_80211 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -755,41 +691,14 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y # # USB Network Adapters # -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=y -CONFIG_USB_NET_CDCETHER=y -CONFIG_USB_NET_DM9601=m -# CONFIG_USB_NET_SMSC95XX is not set -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -# CONFIG_PPPOL2TP is not set +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -805,10 +714,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -818,47 +724,54 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_ELANTECH is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_CONSOLE_TRANSLATIONS is not set CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -878,6 +791,7 @@ CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -885,6 +799,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set @@ -900,6 +815,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y @@ -925,8 +841,6 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -975,68 +889,8 @@ CONFIG_GPIO_TWL4030=y # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=m -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_BQ27x00 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADCXX is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1111 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y @@ -1046,7 +900,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_OMAP_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y # # USB-based Watchdog Cards @@ -1077,237 +932,9 @@ CONFIG_TWL4030_CORE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_CX25840=m -CONFIG_VIDEO_CX2341X=m -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_AU0828 is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_V4L_USB_DRIVERS=y -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -# CONFIG_USB_GSPCA is not set -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -# CONFIG_VIDEO_EM28XX is not set -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_QUICKCAM_MESSENGER=m -# CONFIG_USB_ET61X251 is not set -CONFIG_VIDEO_OVCAMCHIP=m -CONFIG_USB_W9968CF=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_ZR364XX=m -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -# CONFIG_USB_MR800 is not set -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Supported USB Adapters -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -# CONFIG_DVB_USB_DW2102 is not set -# CONFIG_DVB_USB_CINERGY_T2 is not set -# CONFIG_DVB_USB_ANYSEE is not set -# CONFIG_DVB_USB_DTV5100 is not set -# CONFIG_DVB_USB_AF9015 is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_S5H1420=m -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -CONFIG_DVB_STV0299=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -# CONFIG_DVB_TDA8261 is not set -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -# CONFIG_DVB_TUNER_CX24113 is not set -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -# CONFIG_DVB_DRX397XD is not set -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -# CONFIG_DVB_LGDT3304 is not set -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_LNBP21=m -# CONFIG_DVB_ISL6405 is not set -CONFIG_DVB_ISL6421=m -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1366,53 +993,10 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=y -CONFIG_SND_RAWMIDI=y -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_VERBOSE is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_ARM=y -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_MCBSP=y -# CONFIG_SND_OMAP_SOC_OVERO is not set -CONFIG_SND_OMAP_SOC_SDP3430=y -# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_SOC_ALL_CODECS is not set -CONFIG_SND_SOC_TWL4030=y -# CONFIG_SOUND_PRIME is not set +# CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y +# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1425,35 +1009,35 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -1461,9 +1045,9 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set @@ -1476,8 +1060,12 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -1493,23 +1081,25 @@ CONFIG_USB_MUSB_SOC=y CONFIG_USB_MUSB_OTG=y CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC_HCD=y -CONFIG_MUSB_PIO_ONLY=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set # CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y -CONFIG_USB_WDM=y +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1551,14 +1141,14 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_TEST=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set CONFIG_USB_GADGET=y @@ -1574,25 +1164,29 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_CDC_COMPOSITE=m # # OTG and related infrastructure @@ -1601,6 +1195,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y @@ -1617,7 +1212,6 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_OMAP is not set CONFIG_MMC_OMAP_HS=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set @@ -1628,9 +1222,16 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1639,7 +1240,12 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1672,6 +1278,7 @@ CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1703,6 +1310,7 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set @@ -1711,9 +1319,15 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set +# +# CBUS support +# +# CONFIG_CBUS is not set + # # File systems # @@ -1721,22 +1335,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1749,16 +1361,18 @@ CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems @@ -1793,15 +1407,13 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set @@ -1816,20 +1428,20 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1917,12 +1529,15 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1932,10 +1547,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set @@ -1950,30 +1564,20 @@ CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y +# CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_RING_BUFFER=y -CONFIG_TRACING=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set # # Security options @@ -1982,10 +1586,6 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y # @@ -2000,13 +1600,15 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data @@ -2021,58 +1623,58 @@ CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set # # Hash modes # -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set # # Ciphers # -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # # Compression # -CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -2080,6 +1682,7 @@ CONFIG_CRYPTO_DEFLATE=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -2087,17 +1690,16 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=m -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_CRC7=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From db408023b85644e1bee80d4004aff1ff188032e9 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Sun, 22 Nov 2009 10:11:27 -0800 Subject: omap3evm: Add board revision function Added function to differentiate between the OMAP3EVM revisions. The chip-id of the ethernet PHY is being used for this purpose. Rev A to D : 0x01150000 Rev >= E : 0x92200000 Signed-off-by: Vaibhav Hiremath Signed-off-by: Ajay Kumar Gupta Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 35 +++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/board.h | 18 +++++++++++++++++ 2 files changed, 53 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 1edf06adbe3c..149d45ca89a7 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -46,9 +46,42 @@ #define OMAP3EVM_ETHR_START 0x2c000000 #define OMAP3EVM_ETHR_SIZE 1024 +#define OMAP3EVM_ETHR_ID_REV 0x50 #define OMAP3EVM_ETHR_GPIO_IRQ 176 #define OMAP3EVM_SMC911X_CS 5 +static u8 omap3_evm_version; + +u8 get_omap3_evm_rev(void) +{ + return omap3_evm_version; +} +EXPORT_SYMBOL(get_omap3_evm_rev); + +static void __init omap3_evm_get_revision(void) +{ + void __iomem *ioaddr; + unsigned int smsc_id; + + /* Ethernet PHY ID is stored at ID_REV register */ + ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K); + if (!ioaddr) + return; + smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000; + iounmap(ioaddr); + + switch (smsc_id) { + /*SMSC9115 chipset*/ + case 0x01150000: + omap3_evm_version = OMAP3EVM_BOARD_GEN_1; + break; + /*SMSC 9220 chipset*/ + case 0x92200000: + default: + omap3_evm_version = OMAP3EVM_BOARD_GEN_2; + } +} + static struct resource omap3evm_smc911x_resources[] = { [0] = { .start = OMAP3EVM_ETHR_START, @@ -321,6 +354,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init omap3_evm_init(void) { + omap3_evm_get_revision(); + omap3_evm_i2c_init(); platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index c4fc69f09796..abb17b604f82 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -14,6 +14,18 @@ #include +/* + * OMAP35x EVM revision + * Run time detection of EVM revision is done by reading Ethernet + * PHY ID - + * GEN_1 = 0x01150000 + * GEN_2 = 0x92200000 + */ +enum { + OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ + OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ +}; + /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 #define OMAP_TAG_LCD 0x4f05 @@ -157,4 +169,10 @@ extern int omap_board_config_size; /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); +/* OMAP3EVM revision */ +#if defined(CONFIG_MACH_OMAP3EVM) +u8 get_omap3_evm_rev(void); +#else +#define get_omap3_evm_rev() (-EINVAL) +#endif #endif -- cgit v1.2.3-58-ga151 From e8e51d29205b3c507a2e6126e18f76f42b49f5ca Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Sun, 22 Nov 2009 10:11:28 -0800 Subject: omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E) Added runtime programming for the differences in EHCI interface between OMAP3EVM revisions (Rev >= E) and (Rev < E). Changes: - EHCI PHY reset GPIO pin is 21 on Rev >= E while Rev < E uses GPIO pin 135. - Rev >= E uses EHCI Vbus enable GPIO22 line. - Rev >= E uses GPIO61 to select EHCI port either on main board or on Mistral Daughter Card (MDC). OMAP3EVM Rev < E doesn't have EHCI port on main board. - Currently GPIO61 it programmed to enable EHCI port on main board only. Signed-off-by: Ajay Kumar Gupta --- arch/arm/configs/omap3_evm_defconfig | 12 +++++++++--- arch/arm/mach-omap2/board-omap3evm.c | 29 ++++++++++++++++++++++++++--- arch/arm/mach-omap2/mux.c | 7 +++++++ arch/arm/plat-omap/include/plat/mux.h | 5 +++++ 4 files changed, 47 insertions(+), 6 deletions(-) diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 180bf9fb3ecc..da69732dd048 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -676,13 +676,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 149d45ca89a7..010454f58e7d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,6 +43,8 @@ #include "mmc-twl4030.h" #define OMAP3_EVM_TS_GPIO 175 +#define OMAP3_EVM_EHCI_VBUS 22 +#define OMAP3_EVM_EHCI_SELECT 61 #define OMAP3EVM_ETHR_START 0x2c000000 #define OMAP3EVM_ETHR_SIZE 1024 @@ -347,8 +349,9 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, + /* PHY reset GPIO will be runtime programmed based on EVM version */ .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 135, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; @@ -368,9 +371,29 @@ static void __init omap3_evm_init(void) /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ usb_nop_xceiv_register(); #endif + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { + /* enable EHCI VBUS using GPIO22 */ + omap_cfg_reg(AF9_34XX_GPIO22); + gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); + gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); + gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); + + /* Select EHCI port on main board */ + omap_cfg_reg(U3_34XX_GPIO61); + gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); + gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); + gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + + /* setup EHCI phy reset config */ + omap_cfg_reg(AH14_34XX_GPIO21); + ehci_pdata.reset_gpio_port[1] = 21; + + } else { + /* setup EHCI phy reset on MDC */ + omap_cfg_reg(AF4_34XX_GPIO135_OUT); + ehci_pdata.reset_gpio_port[1] = 135; + } usb_musb_init(); - /* Setup EHCI phy reset padconfig */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); usb_ehci_init(&ehci_pdata); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 83256d349444..c18a94eca641 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -559,6 +559,13 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | OMAP34XX_MUX_MODE0) +/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ +MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index f74331d4a9c3..ba77de601501 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -849,6 +849,11 @@ enum omap34xx_index { /* SYS_NIRQ T2 INT1 */ AF26_34XX_SYS_NIRQ, + + /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ + AH14_34XX_GPIO21, + AF9_34XX_GPIO22, + U3_34XX_GPIO61, }; struct omap_mux_cfg { -- cgit v1.2.3-58-ga151 From 1a7ec135d8b263ee0c3ce692e9372a6e4e85e58f Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 22 Nov 2009 10:11:29 -0800 Subject: omap3evm: Initialize vmmc and vmmc_aux regulators Initialize vmmc and vmmc_aux regulators Note that the omap3evm_twldata.vmmc1 and omap3evm_twldata.vsim are set in omap3_evm_i2c_init() to avoid a merge conflict with the MFD tree. These will be initialized in omap3evm_i2c_boardinfo as a fix later on. Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 51 ++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 010454f58e7d..c0336b0cb702 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -28,6 +28,8 @@ #include #include +#include + #include #include #include @@ -127,6 +129,44 @@ static inline void __init omap3evm_init_smc911x(void) gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); } +static struct regulator_consumer_supply omap3evm_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply omap3evm_vsim_supply = { + .supply = "vmmc_aux", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data omap3evm_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3evm_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data omap3evm_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3evm_vsim_supply, +}; + static struct twl4030_hsmmc_info mmc[] = { { .mmc = 1, @@ -169,6 +209,10 @@ static int omap3evm_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + omap3evm_vmmc1_supply.dev = mmc[0].dev; + omap3evm_vsim_supply.dev = mmc[0].dev; + /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -261,6 +305,13 @@ static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { static int __init omap3_evm_i2c_init(void) { + /* + * REVISIT: These entries can be set in omap3evm_twl_data + * after a merge with MFD tree + */ + omap3evm_twldata.vmmc1 = &omap3evm_vmmc1; + omap3evm_twldata.vsim = &omap3evm_vsim; + omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, ARRAY_SIZE(omap3evm_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); -- cgit v1.2.3-58-ga151 From 562138a4487191b5bcc0bea591368db7b3d3900a Mon Sep 17 00:00:00 2001 From: Sriram Date: Sun, 22 Nov 2009 10:11:30 -0800 Subject: omap3evm: MIgrate to smsc911x ethernet driver Migrate to smsc911x ethernet driver instead of smc911x driver. The smsc911x ethernet driver supports NAPI and performs better under heavy traffic. With the smc911x driver we were witnessing very high iowait time for high IO load over NFS. Signed-off-by: Sriramakrishnan Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_evm_defconfig | 4 ++-- arch/arm/mach-omap2/board-omap3evm.c | 43 +++++++++++++++++++++++++----------- 2 files changed, 32 insertions(+), 15 deletions(-) diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index da69732dd048..e190fc8b9a7c 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -617,8 +617,8 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set -CONFIG_SMC911X=y -# CONFIG_SMSC911X is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c0336b0cb702..5efc2e9068db 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -22,11 +22,13 @@ #include #include #include +#include #include #include #include #include +#include #include @@ -52,7 +54,7 @@ #define OMAP3EVM_ETHR_SIZE 1024 #define OMAP3EVM_ETHR_ID_REV 0x50 #define OMAP3EVM_ETHR_GPIO_IRQ 176 -#define OMAP3EVM_SMC911X_CS 5 +#define OMAP3EVM_SMSC911X_CS 5 static u8 omap3_evm_version; @@ -86,7 +88,8 @@ static void __init omap3_evm_get_revision(void) } } -static struct resource omap3evm_smc911x_resources[] = { +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource omap3evm_smsc911x_resources[] = { [0] = { .start = OMAP3EVM_ETHR_START, .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), @@ -95,24 +98,34 @@ static struct resource omap3evm_smc911x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, + .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), }, }; -static struct platform_device omap3evm_smc911x_device = { - .name = "smc911x", +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), +}; + +static struct platform_device omap3evm_smsc911x_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources), - .resource = &omap3evm_smc911x_resources[0], + .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources), + .resource = &omap3evm_smsc911x_resources[0], + .dev = { + .platform_data = &smsc911x_config, + }, }; -static inline void __init omap3evm_init_smc911x(void) +static inline void __init omap3evm_init_smsc911x(void) { int eth_cs; struct clk *l3ck; unsigned int rate; - eth_cs = OMAP3EVM_SMC911X_CS; + eth_cs = OMAP3EVM_SMSC911X_CS; l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) @@ -120,15 +133,20 @@ static inline void __init omap3evm_init_smc911x(void) else rate = clk_get_rate(l3ck); - if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", OMAP3EVM_ETHR_GPIO_IRQ); return; } gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); + platform_device_register(&omap3evm_smsc911x_device); } +#else +static inline void __init omap3evm_init_smsc911x(void) { return; } +#endif + static struct regulator_consumer_supply omap3evm_vmmc1_supply = { .supply = "vmmc", }; @@ -385,12 +403,10 @@ static void __init omap3_evm_init_irq(void) omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); - omap3evm_init_smc911x(); } static struct platform_device *omap3_evm_devices[] __initdata = { &omap3_evm_lcd_device, - &omap3evm_smc911x_device, }; static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -447,6 +463,7 @@ static void __init omap3_evm_init(void) usb_musb_init(); usb_ehci_init(&ehci_pdata); ads7846_dev_init(); + omap3evm_init_smsc911x(); } static void __init omap3_evm_map_io(void) -- cgit v1.2.3-58-ga151 From 479f12c9e2743084ace94d8c65b98ec536cae3cf Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:30 -0800 Subject: omap3: zoom: split board file for software reuse Split zoom2 board file into a base board file and a board-zoom-peripherals.c file. That way the same peripherals file can be reused for zoom3 and sdp3630 in addition to zoom2. Also remove unused struct omap_board_config_kernel entry. NOTE: Keep the twl4030_madc_platform_data and twl4030_platform_data entries in board-zoom2.c to avoid merge conflicts with the pending patches in MFD tree. These entries will be removed later as a fix. Following list shows the commonality across the three platforms and hence the case for software reuse: Peripheral zoom2 zoom3 sdp3630 --------------------------------------- Ethernet smsc smsc smc NOR n/a n/a B Onenand n/a n/a B HDMI A A B (present on different i2c) NAND A A A (same nand) SDRAM A A A (same sdram) Keypad A A A (same twl) Camera A A A (same sensor can be mounted) LCD Display A A A (same wvga display) OPPs A A A (same chip feature) Audio A A A (same audio via twl5030) Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-zoom-peripherals.c | 268 +++++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom2.c | 231 +---------------------- 3 files changed, 275 insertions(+), 225 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-peripherals.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b77fe2463692..8ac121edfa4a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + board-zoom-peripherals.o \ mmc-twl4030.o \ board-zoom-debugboard.o diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c new file mode 100644 index 000000000000..75cbbe747246 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * + * Modified from mach-omap2/board-zoom2.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "mmc-twl4030.h" + +/* Zoom2 has Qwerty keyboard*/ +static int board_keymap[] = { + KEY(0, 0, KEY_E), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + KEY(1, 0, KEY_D), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), + KEY(2, 2, KEY_V), + KEY(2, 3, KEY_END), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), + KEY(3, 3, KEY_F1), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), + KEY(4, 4, KEY_VOLUMEUP), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), + KEY(5, 5, KEY_VOLUMEDOWN), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_ENTER), + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACKSPACE), + KEY(6, 6, KEY_P), + KEY(6, 7, KEY_SELECT), + KEY(7, 0, KEY_PROG1), /*MACRO 1 */ + KEY(7, 1, KEY_PROG2), /*MACRO 2 */ + KEY(7, 2, KEY_PROG3), /*MACRO 3 */ + KEY(7, 3, KEY_PROG4), /*MACRO 4 */ + KEY(7, 5, KEY_RIGHT), + KEY(7, 6, KEY_UP), + KEY(7, 7, KEY_DOWN) +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data zoom2_kp_twl4030_data = { + .keymap_data = &board_map_data, + .rows = 8, + .cols = 8, + .rep = 1, +}; + +static struct regulator_consumer_supply zoom2_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply zoom2_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct regulator_consumer_supply zoom2_vmmc2_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data zoom2_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom2_vmmc1_supply, +}; + +/* VMMC2 for MMC2 card */ +static struct regulator_init_data zoom2_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 1850000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom2_vmmc2_supply, +}; + +/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ +static struct regulator_init_data zoom2_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom2_vsim_supply, +}; + +static struct twl4030_hsmmc_info mmc[] __initdata = { + { + .mmc = 1, + .wires = 4, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 4, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +static int zoom2_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ), + * gpio + 1 is "mmc1_cd" (input/IRQ) + */ + mmc[0].gpio_cd = gpio + 0; + mmc[1].gpio_cd = gpio + 1; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + zoom2_vmmc1_supply.dev = mmc[0].dev; + zoom2_vsim_supply.dev = mmc[0].dev; + zoom2_vmmc2_supply.dev = mmc[1].dev; + + return 0; +} + + +static int zoom2_batt_table[] = { +/* 0 C*/ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data zoom2_bci_data = { + .battery_tmp_tbl = zoom2_batt_table, + .tblsize = ARRAY_SIZE(zoom2_batt_table), +}; + +static struct twl4030_usb_data zoom2_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_gpio_platform_data zoom2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .setup = zoom2_twl_gpio_setup, +}; + +static struct twl4030_madc_platform_data zoom2_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_codec_audio_data zoom2_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data zoom2_codec_data = { + .audio_mclk = 26000000, + .audio = &zoom2_audio_data, +}; + +static struct twl4030_platform_data zoom2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .bci = &zoom2_bci_data, + .madc = &zoom2_madc_data, + .usb = &zoom2_usb_data, + .gpio = &zoom2_gpio_data, + .keypad = &zoom2_kp_twl4030_data, + .codec = &zoom2_codec_data, + .vmmc1 = &zoom2_vmmc1, + .vmmc2 = &zoom2_vmmc2, + .vsim = &zoom2_vsim, + +}; + +static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom2_twldata, + }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, + ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +void __init zoom_peripherals_init(void) +{ + omap_i2c_init(); + omap_serial_init(); + usb_musb_init(); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 67abebc46feb..31d485b6859f 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,232 +13,31 @@ #include #include #include -#include #include -#include -#include #include #include #include -#include +#include -#include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" -/* Zoom2 has Qwerty keyboard*/ -static int board_keymap[] = { - KEY(0, 0, KEY_E), - KEY(0, 1, KEY_R), - KEY(0, 2, KEY_T), - KEY(0, 3, KEY_HOME), - KEY(0, 6, KEY_I), - KEY(0, 7, KEY_LEFTSHIFT), - KEY(1, 0, KEY_D), - KEY(1, 1, KEY_F), - KEY(1, 2, KEY_G), - KEY(1, 3, KEY_SEND), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_ENTER), - KEY(2, 0, KEY_X), - KEY(2, 1, KEY_C), - KEY(2, 2, KEY_V), - KEY(2, 3, KEY_END), - KEY(2, 6, KEY_DOT), - KEY(2, 7, KEY_CAPSLOCK), - KEY(3, 0, KEY_Z), - KEY(3, 1, KEY_KPPLUS), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_F1), - KEY(3, 6, KEY_O), - KEY(3, 7, KEY_SPACE), - KEY(4, 0, KEY_W), - KEY(4, 1, KEY_Y), - KEY(4, 2, KEY_U), - KEY(4, 3, KEY_F2), - KEY(4, 4, KEY_VOLUMEUP), - KEY(4, 6, KEY_L), - KEY(4, 7, KEY_LEFT), - KEY(5, 0, KEY_S), - KEY(5, 1, KEY_H), - KEY(5, 2, KEY_J), - KEY(5, 3, KEY_F3), - KEY(5, 5, KEY_VOLUMEDOWN), - KEY(5, 6, KEY_M), - KEY(5, 7, KEY_ENTER), - KEY(6, 0, KEY_Q), - KEY(6, 1, KEY_A), - KEY(6, 2, KEY_N), - KEY(6, 3, KEY_BACKSPACE), - KEY(6, 6, KEY_P), - KEY(6, 7, KEY_SELECT), - KEY(7, 0, KEY_PROG1), /*MACRO 1 */ - KEY(7, 1, KEY_PROG2), /*MACRO 2 */ - KEY(7, 2, KEY_PROG3), /*MACRO 3 */ - KEY(7, 3, KEY_PROG4), /*MACRO 4 */ - KEY(7, 5, KEY_RIGHT), - KEY(7, 6, KEY_UP), - KEY(7, 7, KEY_DOWN) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data zoom2_kp_twl4030_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -static struct omap_board_config_kernel zoom2_config[] __initdata = { -}; - -static struct regulator_consumer_supply zoom2_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply zoom2_vsim_supply = { - .supply = "vmmc_aux", -}; - -static struct regulator_consumer_supply zoom2_vmmc2_supply = { - .supply = "vmmc", -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data zoom2_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc1_supply, -}; - -/* VMMC2 for MMC2 card */ -static struct regulator_init_data zoom2_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 1850000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc2_supply, -}; - -/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data zoom2_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vsim_supply, -}; - -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .wires = 4, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .wires = 4, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static int zoom2_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ - mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; - twl4030_mmc_init(mmc); - - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - zoom2_vmmc1_supply.dev = mmc[0].dev; - zoom2_vsim_supply.dev = mmc[0].dev; - zoom2_vmmc2_supply.dev = mmc[1].dev; - - return 0; -} - - -static int zoom2_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data zoom2_bci_data = { - .battery_tmp_tbl = zoom2_batt_table, - .tblsize = ARRAY_SIZE(zoom2_batt_table), -}; - -static struct twl4030_usb_data zoom2_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static void __init omap_zoom2_init_irq(void) { - omap_board_config = zoom2_config; - omap_board_config_size = ARRAY_SIZE(zoom2_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } -static struct twl4030_gpio_platform_data zoom2_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .setup = zoom2_twl_gpio_setup, -}; +/* REVISIT: These audio entries can be removed once MFD code is merged */ +#if 0 static struct twl4030_madc_platform_data zoom2_madc_data = { .irq_line = 1, }; -static struct twl4030_codec_audio_data zoom2_audio_data = { - .audio_mclk = 26000000, -}; - -static struct twl4030_codec_data zoom2_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom2_audio_data, -}; - static struct twl4030_platform_data zoom2_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -249,39 +48,21 @@ static struct twl4030_platform_data zoom2_twldata = { .usb = &zoom2_usb_data, .gpio = &zoom2_gpio_data, .keypad = &zoom2_kp_twl4030_data, - .codec = &zoom2_codec_data, .vmmc1 = &zoom2_vmmc1, .vmmc2 = &zoom2_vmmc2, .vsim = &zoom2_vsim, }; -static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom2_twldata, - }, -}; - -static int __init omap_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, - ARRAY_SIZE(zoom2_i2c_boardinfo)); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} +#endif extern int __init omap_zoom2_debugboard_init(void); +extern void __init zoom_peripherals_init(void); static void __init omap_zoom2_init(void) { - omap_i2c_init(); - omap_serial_init(); + zoom_peripherals_init(); omap_zoom2_debugboard_init(); - usb_musb_init(); } static void __init omap_zoom2_map_io(void) -- cgit v1.2.3-58-ga151 From 62d0b336d4b00bde6e3f0f155009975351823c54 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:31 -0800 Subject: omap3: zoom: rename zoom2 name to generic zoom Replace zoom2 with zoom name in board-zoom-peripherals.c file and board-zoom-debugboard.c. Create mach/board-zoom.h. This file has functions reused for boards: Zoom2/Zoom3/sdp3630. Hence have all functions commonly named as zoom Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom-debugboard.c | 70 ++++++++++++------------ arch/arm/mach-omap2/board-zoom-peripherals.c | 77 +++++++++++++-------------- arch/arm/mach-omap2/board-zoom2.c | 7 ++- arch/arm/mach-omap2/include/mach/board-zoom.h | 5 ++ 4 files changed, 81 insertions(+), 78 deletions(-) create mode 100644 arch/arm/mach-omap2/include/mach/board-zoom.h diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 91ecddc9057a..bb4018b60642 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -16,18 +16,18 @@ #include -#define ZOOM2_SMSC911X_CS 7 -#define ZOOM2_SMSC911X_GPIO 158 -#define ZOOM2_QUADUART_CS 3 -#define ZOOM2_QUADUART_GPIO 102 +#define ZOOM_SMSC911X_CS 7 +#define ZOOM_SMSC911X_GPIO 158 +#define ZOOM_QUADUART_CS 3 +#define ZOOM_QUADUART_GPIO 102 #define QUART_CLK 1843200 #define DEBUG_BASE 0x08000000 -#define ZOOM2_ETHR_START DEBUG_BASE +#define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom2_smsc911x_resources[] = { +static struct resource zoom_smsc911x_resources[] = { [0] = { - .start = ZOOM2_ETHR_START, - .end = ZOOM2_ETHR_START + SZ_4K, + .start = ZOOM_ETHR_START, + .end = ZOOM_ETHR_START + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = { }, }; -static struct smsc911x_platform_config zoom2_smsc911x_config = { +static struct smsc911x_platform_config zoom_smsc911x_config = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, .flags = SMSC911X_USE_32BIT, .phy_interface = PHY_INTERFACE_MODE_MII, }; -static struct platform_device zoom2_smsc911x_device = { +static struct platform_device zoom_smsc911x_device = { .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), - .resource = zoom2_smsc911x_resources, + .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), + .resource = zoom_smsc911x_resources, .dev = { - .platform_data = &zoom2_smsc911x_config, + .platform_data = &zoom_smsc911x_config, }, }; -static inline void __init zoom2_init_smsc911x(void) +static inline void __init zoom_init_smsc911x(void) { int eth_cs; unsigned long cs_mem_base; int eth_gpio = 0; - eth_cs = ZOOM2_SMSC911X_CS; + eth_cs = ZOOM_SMSC911X_CS; if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); return; } - zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - eth_gpio = ZOOM2_SMSC911X_GPIO; + eth_gpio = ZOOM_SMSC911X_GPIO; - zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); if (gpio_request(eth_gpio, "smsc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", @@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = { } }; -static struct platform_device zoom2_debugboard_serial_device = { +static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", .id = 3, .dev = { @@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = { }, }; -static inline void __init zoom2_init_quaduart(void) +static inline void __init zoom_init_quaduart(void) { int quart_cs; unsigned long cs_mem_base; int quart_gpio = 0; - quart_cs = ZOOM2_QUADUART_CS; + quart_cs = ZOOM_QUADUART_CS; if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem" @@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void) return; } - quart_gpio = ZOOM2_QUADUART_GPIO; + quart_gpio = ZOOM_QUADUART_GPIO; if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", @@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void) gpio_direction_input(quart_gpio); } -static inline int omap_zoom2_debugboard_detect(void) +static inline int omap_zoom_debugboard_detect(void) { int debug_board_detect = 0; int ret = 1; - debug_board_detect = ZOOM2_SMSC911X_GPIO; + debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } @@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void) return ret; } -static struct platform_device *zoom2_devices[] __initdata = { - &zoom2_smsc911x_device, - &zoom2_debugboard_serial_device, +static struct platform_device *zoom_devices[] __initdata = { + &zoom_smsc911x_device, + &zoom_debugboard_serial_device, }; -int __init omap_zoom2_debugboard_init(void) +int __init zoom_debugboard_init(void) { - if (!omap_zoom2_debugboard_detect()) + if (!omap_zoom_debugboard_detect()) return 0; - zoom2_init_smsc911x(); - zoom2_init_quaduart(); - return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); + zoom_init_smsc911x(); + zoom_init_quaduart(); + return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 75cbbe747246..3535b7a73af7 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -86,27 +86,27 @@ static struct matrix_keymap_data board_map_data = { .keymap_size = ARRAY_SIZE(board_keymap), }; -static struct twl4030_keypad_data zoom2_kp_twl4030_data = { +static struct twl4030_keypad_data zoom_kp_twl4030_data = { .keymap_data = &board_map_data, .rows = 8, .cols = 8, .rep = 1, }; -static struct regulator_consumer_supply zoom2_vmmc1_supply = { +static struct regulator_consumer_supply zoom_vmmc1_supply = { .supply = "vmmc", }; -static struct regulator_consumer_supply zoom2_vsim_supply = { +static struct regulator_consumer_supply zoom_vsim_supply = { .supply = "vmmc_aux", }; -static struct regulator_consumer_supply zoom2_vmmc2_supply = { +static struct regulator_consumer_supply zoom_vmmc2_supply = { .supply = "vmmc", }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data zoom2_vmmc1 = { +static struct regulator_init_data zoom_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -117,11 +117,11 @@ static struct regulator_init_data zoom2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc1_supply, + .consumer_supplies = &zoom_vmmc1_supply, }; /* VMMC2 for MMC2 card */ -static struct regulator_init_data zoom2_vmmc2 = { +static struct regulator_init_data zoom_vmmc2 = { .constraints = { .min_uV = 1850000, .max_uV = 1850000, @@ -132,11 +132,11 @@ static struct regulator_init_data zoom2_vmmc2 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc2_supply, + .consumer_supplies = &zoom_vmmc2_supply, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data zoom2_vsim = { +static struct regulator_init_data zoom_vsim = { .constraints = { .min_uV = 1800000, .max_uV = 3000000, @@ -147,7 +147,7 @@ static struct regulator_init_data zoom2_vsim = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vsim_supply, + .consumer_supplies = &zoom_vsim_supply, }; static struct twl4030_hsmmc_info mmc[] __initdata = { @@ -164,7 +164,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static int zoom2_twl_gpio_setup(struct device *dev, +static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ), @@ -177,15 +177,15 @@ static int zoom2_twl_gpio_setup(struct device *dev, /* link regulators to MMC adapters ... we "know" the * regulators will be set up only *after* we return. */ - zoom2_vmmc1_supply.dev = mmc[0].dev; - zoom2_vsim_supply.dev = mmc[0].dev; - zoom2_vmmc2_supply.dev = mmc[1].dev; + zoom_vmmc1_supply.dev = mmc[0].dev; + zoom_vsim_supply.dev = mmc[0].dev; + zoom_vmmc2_supply.dev = mmc[1].dev; return 0; } -static int zoom2_batt_table[] = { +static int zoom_batt_table[] = { /* 0 C*/ 30800, 29500, 28300, 27100, 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, @@ -196,65 +196,64 @@ static int zoom2_batt_table[] = { 4040, 3910, 3790, 3670, 3550 }; -static struct twl4030_bci_platform_data zoom2_bci_data = { - .battery_tmp_tbl = zoom2_batt_table, - .tblsize = ARRAY_SIZE(zoom2_batt_table), +static struct twl4030_bci_platform_data zoom_bci_data = { + .battery_tmp_tbl = zoom_batt_table, + .tblsize = ARRAY_SIZE(zoom_batt_table), }; -static struct twl4030_usb_data zoom2_usb_data = { +static struct twl4030_usb_data zoom_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_gpio_platform_data zoom2_gpio_data = { +static struct twl4030_gpio_platform_data zoom_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, - .setup = zoom2_twl_gpio_setup, + .setup = zoom_twl_gpio_setup, }; -static struct twl4030_madc_platform_data zoom2_madc_data = { +static struct twl4030_madc_platform_data zoom_madc_data = { .irq_line = 1, }; -static struct twl4030_codec_audio_data zoom2_audio_data = { +static struct twl4030_codec_audio_data zoom_audio_data = { .audio_mclk = 26000000, }; -static struct twl4030_codec_data zoom2_codec_data = { +static struct twl4030_codec_data zoom_codec_data = { .audio_mclk = 26000000, - .audio = &zoom2_audio_data, + .audio = &zoom_audio_data, }; -static struct twl4030_platform_data zoom2_twldata = { +static struct twl4030_platform_data zoom_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .bci = &zoom2_bci_data, - .madc = &zoom2_madc_data, - .usb = &zoom2_usb_data, - .gpio = &zoom2_gpio_data, - .keypad = &zoom2_kp_twl4030_data, - .codec = &zoom2_codec_data, - .vmmc1 = &zoom2_vmmc1, - .vmmc2 = &zoom2_vmmc2, - .vsim = &zoom2_vsim, + .bci = &zoom_bci_data, + .madc = &zoom_madc_data, + .usb = &zoom_usb_data, + .gpio = &zoom_gpio_data, + .keypad = &zoom_kp_twl4030_data, + .codec = &zoom_codec_data, + .vmmc2 = &zoom_vmmc2, + .vsim = &zoom_vsim, }; -static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { +static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { { I2C_BOARD_INFO("twl4030", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom2_twldata, + .platform_data = &zoom_twldata, }, }; static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, - ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo, + ARRAY_SIZE(zoom_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 31d485b6859f..2f980e36ebfd 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -21,6 +21,8 @@ #include #include +#include + #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -56,13 +58,10 @@ static struct twl4030_platform_data zoom2_twldata = { #endif -extern int __init omap_zoom2_debugboard_init(void); -extern void __init zoom_peripherals_init(void); - static void __init omap_zoom2_init(void) { zoom_peripherals_init(); - omap_zoom2_debugboard_init(); + zoom_debugboard_init(); } static void __init omap_zoom2_map_io(void) diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h new file mode 100644 index 000000000000..c93b29e21b78 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -0,0 +1,5 @@ +/* + * Defines for zoom boards + */ +extern int __init zoom_debugboard_init(void); +extern void __init zoom_peripherals_init(void); -- cgit v1.2.3-58-ga151 From 6b61a83b31744d143b0e7bc92f463d831319eabc Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:31 -0800 Subject: omap3: zoom: Drop i2c-1 speed to 2400 The I2C-1 bus frequency on zoom2/zoom3/sdp3630 should be 2.4 MHz. The speed is limited by TWL5030/GAIA; a higher speed could lead to errors on the interface. The maximum I2C speed depends on the system clock for GAIA: 2.2 MHz (sys-clk = 19.2 MHz) 2.4 MHz (sys-clk = 26 MHz) 2.9 MHz (sys-clk = 38.4 MHz) For Zoom2/Zoom3/SDP3630 the system clock is 26Mhz and hence choose 2.4Mhz for I2C1 bus speed Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom-peripherals.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) mode change 100644 => 100755 arch/arm/mach-omap2/board-zoom-peripherals.c diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c old mode 100644 new mode 100755 index 3535b7a73af7..f14baa392760 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -243,7 +243,7 @@ static struct twl4030_platform_data zoom_twldata = { static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("twl5030", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &zoom_twldata, @@ -252,7 +252,7 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo, + omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, ARRAY_SIZE(zoom_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); -- cgit v1.2.3-58-ga151 From 5f35fbe8b8a05743fb9686e33194a126cd4273f6 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:32 -0800 Subject: omap3: zoom: Introduce zoom3 board support Zoom3 is the next version of Zoom2 board. There has been a silicon update from zoom2 to zoom3. Zoom2 has OMAP34xx Zoom3 has OMAP3630 [1] Zoom3 = OMAP3630 SOM board [2] + same zoom2 main board [3] + same debugboard Zoom3 has a SDRAM part from Hynix Zoom2 had SDRAM part from micron Hynix memory timings are contributed by: Chalhoub, Nicole and Bour, Vincent Reuse the zoom2 files as much for zoom3, as at board level, there is no change at all. References: (courtesy Nishant Menon) [1] OMAP3630 http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606 [2] SOM boards http://logicpd.com/products/system-modules/texas-instruments-omap35x-som-lv [3] Zoom2 boards http://logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp OMAP3630: Signed-off-by: Vikram Pandita Cc: Nicole Chalhoub Cc: Vincent Bour Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 ++ arch/arm/mach-omap2/Makefile | 4 ++ arch/arm/mach-omap2/board-zoom3.c | 59 ++++++++++++++++++++++ arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h | 51 +++++++++++++++++++ 4 files changed, 118 insertions(+) create mode 100644 arch/arm/mach-omap2/board-zoom3.c create mode 100644 arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index aad194f61a33..0d14dde68cd4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -97,6 +97,10 @@ config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP_ZOOM3 + bool "OMAP3630 Zoom3 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8ac121edfa4a..f40619ed7fad 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -78,6 +78,10 @@ obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ mmc-twl4030.o \ board-zoom-debugboard.o +obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ + board-zoom-peripherals.o \ + mmc-twl4030.o \ + board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c new file mode 100644 index 000000000000..8d965a6516c8 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include "sdram-hynix-h8mbx00u0mer-0em.h" + +static void __init omap_zoom_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +static struct omap_board_config_kernel zoom_config[] __initdata = { +}; + +static void __init omap_zoom_init_irq(void) +{ + omap_board_config = zoom_config; + omap_board_config_size = ARRAY_SIZE(zoom_config); + omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params, + h8mbx00u0mer0em_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init omap_zoom_init(void) +{ + zoom_peripherals_init(); + zoom_debugboard_init(); +} + +MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom_map_io, + .init_irq = omap_zoom_init_irq, + .init_machine = omap_zoom_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h new file mode 100644 index 000000000000..8bfaf342a028 --- /dev/null +++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h @@ -0,0 +1,51 @@ +/* + * SDRC register values for the Hynix H8MBX00U0MER-0EM + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM +#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM + +#include + +/* Hynix H8MBX00U0MER-0EM */ +static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { + [0] = { + .rate = 200000000, + .actim_ctrla = 0xa2e1b4c6, + .actim_ctrlb = 0x0002131c, + .rfr_ctrl = 0x0005e601, + .mr = 0x00000032, + }, + [1] = { + .rate = 166000000, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 100000000, + .actim_ctrla = 0x51912284, + .actim_ctrlb = 0x0002120e, + .rfr_ctrl = 0x0002d101, + .mr = 0x00000022, + }, + [3] = { + .rate = 83000000, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [4] = { + .rate = 0 + }, +}; + +#endif -- cgit v1.2.3-58-ga151 From d516aad1c3ebc468dc042da86530278d3a1a2c09 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:33 -0800 Subject: omap: zoom3: defconfig creation Create zoom3 defconfig file Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_zoom3_defconfig | 1610 +++++++++++++++++++++++++++++++++ 1 file changed, 1610 insertions(+) create mode 100644 arch/arm/configs/omap_zoom3_defconfig diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig new file mode 100644 index 000000000000..f0e7d0f85582 --- /dev/null +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -0,0 +1,1610 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Thu Nov 12 13:04:07 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_NONE=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_CM_T35 is not set +CONFIG_MACH_OMAP_ZOOM3=y +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_VERBOSE=y +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=y +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set +# CONFIG_HDQ_MASTER_OMAP is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_DEBUG=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_TWL4030 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From 1ced4532c0fc8cba1776e237b8c7fda6edc19330 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Sun, 22 Nov 2009 10:11:34 -0800 Subject: omap: zoom2: update defconfig for LL_DEBUG_NONE Update DEBUG_LL for zoom2 board as CONFIG_OMAP_LL_DEBUG_NONE Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_zoom2_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index a32d126fc510..eef93627fb13 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -202,7 +202,8 @@ CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_NONE=y CONFIG_ARCH_OMAP34XX=y CONFIG_ARCH_OMAP3430=y -- cgit v1.2.3-58-ga151 From 9c2816f7bd445c5eb152babff4d6fb3f8f556610 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Sun, 22 Nov 2009 10:11:34 -0800 Subject: omap1: Add board support and LCD for HTC Herald This patch introduces support for the HTC Herald (T-Mobile Wing, etc.) series of smart phones -- board support and LCD panel settings. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 6 + arch/arm/mach-omap1/Makefile | 1 + arch/arm/mach-omap1/board-htcherald.c | 247 ++++++++++++++++++++++++++++++++++ drivers/video/omap/Makefile | 1 + drivers/video/omap/lcd_htcherald.c | 130 ++++++++++++++++++ 5 files changed, 385 insertions(+) create mode 100644 arch/arm/mach-omap1/board-htcherald.c create mode 100644 drivers/video/omap/lcd_htcherald.c diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 323272651933..27f489747bbd 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -57,6 +57,12 @@ config MACH_OMAP_HTCWIZARD help HTC Wizard smartphone support (AKA QTEK 9100, ...) +config MACH_HERALD + bool "HTC Herald" + depends on ARCH_OMAP850 + help + HTC Herald smartphone support (AKA T-Mobile Wing, ...) + config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 6867cd3ad0b4..87e539aa8ad9 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o +obj-$(CONFIG_MACH_HERALD) += board-htcherald.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c new file mode 100644 index 000000000000..5f28a5ceacac --- /dev/null +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -0,0 +1,247 @@ +/* + * HTC Herald board configuration + * Copyright (C) 2009 Cory Maccarrone + * Copyright (C) 2009 Wing Linux + * + * Based on the board-htcwizard.c file from the linwizard project: + * Copyright (C) 2006 Unai Uribarri + * Copyright (C) 2008 linwizard.sourceforge.net + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include + +#include + +/* LCD register definition */ +#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) +#define OMAP_LCDC_STATUS (0xfffec000 + 0x10) +#define OMAP_DMA_LCD_CCR (0xfffee300 + 0xc2) +#define OMAP_DMA_LCD_CTRL (0xfffee300 + 0xc4) +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_STAT_DONE (1 << 0) + +static struct omap_lcd_config htcherald_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel htcherald_config[] __initdata = { + { OMAP_TAG_LCD, &htcherald_lcd_config }, +}; + +/* Keyboard definition */ + +static int htc_herald_keymap[] = { + KEY(0, 0, KEY_RECORD), /* Mail button */ + KEY(0, 1, KEY_CAMERA), /* Camera */ + KEY(0, 2, KEY_PHONE), /* Send key */ + KEY(0, 3, KEY_VOLUMEUP), /* Volume up */ + KEY(0, 4, KEY_F2), /* Right bar (landscape) */ + KEY(0, 5, KEY_MAIL), /* Win key (portrait) */ + KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */ + KEY(1, 0, KEY_LEFTCTRL), /* Windows key */ + KEY(1, 1, KEY_COMMA), + KEY(1, 2, KEY_M), + KEY(1, 3, KEY_K), + KEY(1, 4, KEY_SLASH), /* OK key */ + KEY(1, 5, KEY_I), + KEY(1, 6, KEY_U), + KEY(2, 0, KEY_LEFTALT), + KEY(2, 1, KEY_TAB), + KEY(2, 2, KEY_N), + KEY(2, 3, KEY_J), + KEY(2, 4, KEY_ENTER), + KEY(2, 5, KEY_H), + KEY(2, 6, KEY_Y), + KEY(3, 0, KEY_SPACE), + KEY(3, 1, KEY_L), + KEY(3, 2, KEY_B), + KEY(3, 3, KEY_V), + KEY(3, 4, KEY_BACKSPACE), + KEY(3, 5, KEY_G), + KEY(3, 6, KEY_T), + KEY(4, 0, KEY_CAPSLOCK), /* Shift */ + KEY(4, 1, KEY_C), + KEY(4, 2, KEY_F), + KEY(4, 3, KEY_R), + KEY(4, 4, KEY_O), + KEY(4, 5, KEY_E), + KEY(4, 6, KEY_D), + KEY(5, 0, KEY_X), + KEY(5, 1, KEY_Z), + KEY(5, 2, KEY_S), + KEY(5, 3, KEY_W), + KEY(5, 4, KEY_P), + KEY(5, 5, KEY_Q), + KEY(5, 6, KEY_A), + KEY(6, 0, KEY_CONNECT), /* Voice button */ + KEY(6, 2, KEY_CANCEL), /* End key */ + KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */ + KEY(6, 4, KEY_F1), /* Left bar (landscape) */ + KEY(6, 5, KEY_WWW), /* OK button (portrait) */ + KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */ + 0 +}; + +struct omap_kp_platform_data htcherald_kp_data = { + .rows = 7, + .cols = 7, + .delay = 20, + .rep = 1, + .keymap = htc_herald_keymap, +}; + +static struct resource kp_resources[] = { + [0] = { + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &htcherald_kp_data, + }, + .num_resources = ARRAY_SIZE(kp_resources), + .resource = kp_resources, +}; + +/* LCD Device resources */ +static struct platform_device lcd_device = { + .name = "lcd_htcherald", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &kp_device, + &lcd_device, +}; + +/* + * Init functions from here on + */ + +static void __init htcherald_lcd_init(void) +{ + u32 reg; + unsigned int tries = 200; + + /* disable controller if active */ + reg = omap_readl(OMAP_LCDC_CONTROL); + if (reg & OMAP_LCDC_CTRL_LCD_EN) { + reg &= ~OMAP_LCDC_CTRL_LCD_EN; + omap_writel(reg, OMAP_LCDC_CONTROL); + + /* wait for end of frame */ + while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) { + tries--; + if (!tries) + break; + } + if (!tries) + printk(KERN_WARNING "Timeout waiting for end of frame " + "-- LCD may not be available\n"); + + /* turn off DMA */ + reg = omap_readw(OMAP_DMA_LCD_CCR); + reg &= ~(1 << 7); + omap_writew(reg, OMAP_DMA_LCD_CCR); + + reg = omap_readw(OMAP_DMA_LCD_CTRL); + reg &= ~(1 << 8); + omap_writew(reg, OMAP_DMA_LCD_CTRL); + } +} + +static void __init htcherald_map_io(void) +{ + omap1_map_common_io(); + + /* + * The LCD panel must be disabled and DMA turned off here, as doing + * it later causes the LCD never to reinitialize. + */ + htcherald_lcd_init(); + + printk(KERN_INFO "htcherald_map_io done.\n"); +} + +static void __init htcherald_disable_watchdog(void) +{ + /* Disable watchdog if running */ + if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) { + /* + * disable a potentially running watchdog timer before + * it kills us. + */ + printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n"); + omap_writel(0xF5, OMAP_WDT_TIMER_MODE); + omap_writel(0xA0, OMAP_WDT_TIMER_MODE); + } +} + +static void __init htcherald_init(void) +{ + printk(KERN_INFO "HTC Herald init.\n"); + + omap_gpio_init(); + + omap_board_config = htcherald_config; + omap_board_config_size = ARRAY_SIZE(htcherald_config); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + htcherald_disable_watchdog(); +} + +static void __init htcherald_init_irq(void) +{ + printk(KERN_INFO "htcherald_init_irq.\n"); + omap1_init_common_hw(); + omap_init_irq(); +} + +MACHINE_START(HERALD, "HTC Herald") + /* Maintainer: Cory Maccarrone */ + /* Maintainer: wing-linux.sourceforge.net */ + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = htcherald_map_io, + .init_irq = htcherald_init_irq, + .init_machine = htcherald_init, + .timer = &omap_timer, +MACHINE_END diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index b63b198d1f03..49226a1b909e 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -35,6 +35,7 @@ objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o +objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c new file mode 100644 index 000000000000..2e0c81ea7483 --- /dev/null +++ b/drivers/video/omap/lcd_htcherald.c @@ -0,0 +1,130 @@ +/* + * File: drivers/video/omap/lcd-htcherald.c + * + * LCD panel support for the HTC Herald + * + * Copyright (C) 2009 Cory Maccarrone + * Copyright (C) 2009 Wing Linux + * + * Based on the lcd_htcwizard.c file from the linwizard project: + * Copyright (C) linwizard.sourceforge.net + * Author: Angelo Arrifano + * Based on lcd_h4 by Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include + +#include + +static int htcherald_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +{ + return 0; +} + +static void htcherald_panel_cleanup(struct lcd_panel *panel) +{ +} + +static int htcherald_panel_enable(struct lcd_panel *panel) +{ + return 0; +} + +static void htcherald_panel_disable(struct lcd_panel *panel) +{ +} + +static unsigned long htcherald_panel_get_caps(struct lcd_panel *panel) +{ + return 0; +} + +/* Found on WIZ200 (miknix) and some HERA110 models (darkstar62) */ +struct lcd_panel htcherald_panel_1 = { + .name = "lcd_herald", + .config = OMAP_LCDC_PANEL_TFT | + OMAP_LCDC_INV_HSYNC | + OMAP_LCDC_INV_VSYNC | + OMAP_LCDC_INV_PIX_CLOCK, + .bpp = 16, + .data_lines = 16, + .x_res = 240, + .y_res = 320, + .pixel_clock = 6093, + .pcd = 0, /* 15 */ + .hsw = 10, + .hfp = 10, + .hbp = 20, + .vsw = 3, + .vfp = 2, + .vbp = 2, + + .init = htcherald_panel_init, + .cleanup = htcherald_panel_cleanup, + .enable = htcherald_panel_enable, + .disable = htcherald_panel_disable, + .get_caps = htcherald_panel_get_caps, +}; + +static int htcherald_panel_probe(struct platform_device *pdev) +{ + omapfb_register_panel(&htcherald_panel_1); + return 0; +} + +static int htcherald_panel_remove(struct platform_device *pdev) +{ + return 0; +} + +static int htcherald_panel_suspend(struct platform_device *pdev, + pm_message_t mesg) +{ + return 0; +} + +static int htcherald_panel_resume(struct platform_device *pdev) +{ + return 0; +} + +struct platform_driver htcherald_panel_driver = { + .probe = htcherald_panel_probe, + .remove = htcherald_panel_remove, + .suspend = htcherald_panel_suspend, + .resume = htcherald_panel_resume, + .driver = { + .name = "lcd_htcherald", + .owner = THIS_MODULE, + }, +}; + +static int htcherald_panel_drv_init(void) +{ + return platform_driver_register(&htcherald_panel_driver); +} + +static void htcherald_panel_drv_cleanup(void) +{ + platform_driver_unregister(&htcherald_panel_driver); +} + +module_init(htcherald_panel_drv_init); +module_exit(htcherald_panel_drv_cleanup); + -- cgit v1.2.3-58-ga151 From 58c54e156c80ce8d4dd740ad5f414b03b71ff0b7 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Sun, 22 Nov 2009 10:11:35 -0800 Subject: omap1: Add default kernel configuration for Herald This adds a new defconfig for the HTC Herald series of devices. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren --- arch/arm/configs/htcherald_defconfig | 1142 ++++++++++++++++++++++++++++++++++ 1 file changed, 1142 insertions(+) create mode 100644 arch/arm/configs/htcherald_defconfig diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig new file mode 100644 index 000000000000..338267674075 --- /dev/null +++ b/arch/arm/configs/htcherald_defconfig @@ -0,0 +1,1142 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 14 10:56:01 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP850=y +# CONFIG_ARCH_OMAP15XX is not set +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_HTCWIZARD is not set +CONFIG_MACH_HERALD=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_195MHZ=y +# CONFIG_OMAP_ARM_182MHZ is not set +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_OMAP=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_PCOMP=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From 2000655ee7b44ef2816d565c62ae03de74333204 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Sun, 22 Nov 2009 10:11:36 -0800 Subject: omap3: rx51: Add SDRAM init This patch adds board specific SDRAM init for RX51. This patch is a collaboration of work from following people: Juha Yrjola: Original code Lauri Leukkunen: Port to RX51 Tero Kristo: Support for multiple OPP:s, merge of patches Samu Onkalo: Fixed SDRAM parameters according to specs Kalle Jokiniemi: A fix for rounding error Signed-off-by: Tero Kristo Cc: Samu Onkalo Cc: Kalle Jokiniemi Cc: Lauri Leukkunen Cc: Juha Yrjola Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-rx51-sdram.c | 221 +++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/board-rx51.c | 7 +- 3 files changed, 228 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/board-rx51-sdram.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f40619ed7fad..d56fb2b19195 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ mmc-twl4030.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ + board-rx51-sdram.o \ board-rx51-peripherals.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c new file mode 100644 index 000000000000..f392844195d2 --- /dev/null +++ b/arch/arm/mach-omap2/board-rx51-sdram.c @@ -0,0 +1,221 @@ +/* + * SDRC register values for RX51 + * + * Copyright (C) 2008 Nokia Corporation + * + * Lauri Leukkunen + * + * Original code by Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + + +/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ +struct sdram_timings { + u32 casl; + u32 tDAL; + u32 tDPL; + u32 tRRD; + u32 tRCD; + u32 tRP; + u32 tRAS; + u32 tRC; + u32 tRFC; + u32 tXSR; + + u32 tREF; /* in ns */ + + u32 tXP; + u32 tCKE; + u32 tWTR; +}; + +struct omap_sdrc_params rx51_sdrc_params[4]; + +static const struct sdram_timings rx51_timings[] = { + { + .casl = 3, + .tDAL = 33000, + .tDPL = 15000, + .tRRD = 12000, + .tRCD = 22500, + .tRP = 18000, + .tRAS = 42000, + .tRC = 66000, + .tRFC = 138000, + .tXSR = 200000, + + .tREF = 7800, + + .tXP = 2, + .tCKE = 2, + .tWTR = 2 + }, +}; + +static unsigned long sdrc_get_fclk_period(long rate) +{ + /* In picoseconds */ + return 1000000000 / rate; +} + +static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate) +{ + unsigned long tick_ps; + + /* Calculate in picosecs to yield more exact results */ + tick_ps = sdrc_get_fclk_period(rate); + + return (time_ps + tick_ps - 1) / tick_ps; +} +#undef DEBUG +#ifdef DEBUG +static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit, + int ticks, long rate, const char *name) +#else +static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit, + int ticks) +#endif +{ + int mask, nr_bits; + + nr_bits = end_bit - st_bit + 1; + if (ticks >= 1 << nr_bits) + return -1; + mask = (1 << nr_bits) - 1; + *regval &= ~(mask << st_bit); + *regval |= ticks << st_bit; +#ifdef DEBUG + printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks, + (unsigned int)sdrc_get_fclk_period(rate) * ticks / + 1000); +#endif + + return 0; +} + +#ifdef DEBUG +#define SDRC_SET_ONE(reg, st, end, field, rate) \ + if (set_sdrc_timing_regval((reg), (st), (end), \ + rx51_timings->field, (rate), #field) < 0) \ + err = -1; +#else +#define SDRC_SET_ONE(reg, st, end, field, rate) \ + if (set_sdrc_timing_regval((reg), (st), (end), \ + rx51_timings->field) < 0) \ + err = -1; +#endif + +#ifdef DEBUG +static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit, + int time, long rate, const char *name) +#else +static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit, + int time, long rate) +#endif +{ + int ticks, ret; + ret = 0; + + if (time == 0) + ticks = 0; + else + ticks = sdrc_ps_to_ticks(time, rate); + +#ifdef DEBUG + ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks, + rate, name); +#else + ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks); +#endif + + return ret; +} + +#ifdef DEBUG +#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \ + if (set_sdrc_timing_regval_ps((reg), (st), (end), \ + rx51_timings->field, \ + (rate), #field) < 0) \ + err = -1; + +#else +#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \ + if (set_sdrc_timing_regval_ps((reg), (st), (end), \ + rx51_timings->field, (rate)) < 0) \ + err = -1; +#endif + +static int sdrc_timings(int id, long rate) +{ + u32 ticks_per_ms; + u32 rfr, l; + u32 actim_ctrla = 0, actim_ctrlb = 0; + u32 rfr_ctrl; + int err = 0; + long l3_rate = rate / 1000; + + SDRC_SET_ONE_PS(&actim_ctrla, 0, 4, tDAL, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 6, 8, tDPL, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 9, 11, tRRD, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate); + SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate); + + SDRC_SET_ONE_PS(&actim_ctrlb, 0, 7, tXSR, l3_rate); + + SDRC_SET_ONE(&actim_ctrlb, 8, 10, tXP, l3_rate); + SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate); + SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate); + + ticks_per_ms = l3_rate; + rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000; + if (rfr > 65535 + 50) + rfr = 65535; + else + rfr -= 50; + +#ifdef DEBUG + printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr); +#endif + + l = rfr << 8; + rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */ + + rx51_sdrc_params[id].rate = rate; + rx51_sdrc_params[id].actim_ctrla = actim_ctrla; + rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb; + rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl; + rx51_sdrc_params[id].mr = 0x32; + + rx51_sdrc_params[id + 1].rate = 0; + + return err; +} + +struct omap_sdrc_params *rx51_get_sdram_timings(void) +{ + int err; + + err = sdrc_timings(0, 41500000); + err |= sdrc_timings(1, 83000000); + err |= sdrc_timings(2, 166000000); + + return &rx51_sdrc_params[0]; +} + diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f1e7e5bbf985..1bb1de245917 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -30,6 +30,8 @@ #include #include +struct omap_sdrc_params *rx51_get_sdram_timings(void); + static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", }; @@ -55,9 +57,12 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { + struct omap_sdrc_params *sdrc_params; + omap_board_config = rx51_config; omap_board_config_size = ARRAY_SIZE(rx51_config); - omap2_init_common_hw(NULL, NULL); + sdrc_params = rx51_get_sdram_timings(); + omap2_init_common_hw(sdrc_params, sdrc_params); omap_init_irq(); omap_gpio_init(); } -- cgit v1.2.3-58-ga151 From a24e61a9ce6ac6b02356ee6678fa53c74c2fc080 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Wed, 18 Nov 2009 18:41:06 -0800 Subject: omap3: rx51: Add wl1251 wlan driver support wl1251 is connected to the SPI bus in rx51, add support for this. Signed-off-by: Kalle Valo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 81 ++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index fb5988c1a884..15ce6514c5fd 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -37,6 +38,33 @@ #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 +#define RX51_WL1251_POWER_GPIO 87 +#define RX51_WL1251_IRQ_GPIO 42 + +/* list all spi devices here */ +enum { + RX51_SPI_WL1251, +}; + +static struct wl12xx_platform_data wl1251_pdata; + +static struct omap2_mcspi_device_config wl1251_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + +static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { + [RX51_SPI_WL1251] = { + .modalias = "wl1251", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 48000000, + .mode = SPI_MODE_2, + .controller_data = &wl1251_mcspi_config, + .platform_data = &wl1251_pdata, + }, +}; + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -617,11 +645,64 @@ static inline void board_smc91x_init(void) #endif +static void rx51_wl1251_set_power(bool enable) +{ + gpio_set_value(RX51_WL1251_POWER_GPIO, enable); +} + +static void __init rx51_init_wl1251(void) +{ + int irq, ret; + + ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + if (ret < 0) + goto error; + + ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); + if (ret < 0) + goto err_power; + + ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); + if (ret < 0) + goto err_power; + + ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); + if (ret < 0) + goto err_irq; + + irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); + if (irq < 0) + goto err_irq; + + wl1251_pdata.set_power = rx51_wl1251_set_power; + rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; + + return; + +err_irq: + gpio_free(RX51_WL1251_IRQ_GPIO); + +err_power: + gpio_free(RX51_WL1251_POWER_GPIO); + +error: + printk(KERN_ERR "wl1251 board initialisation failed\n"); + wl1251_pdata.set_power = NULL; + + /* + * Now rx51_peripherals_spi_board_info[1].irq is zero and + * set_power is null, and wl1251_probe() will fail. + */ +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); board_onenand_init(); board_smc91x_init(); rx51_add_gpio_keys(); + rx51_init_wl1251(); + spi_register_board_info(rx51_peripherals_spi_board_info, + ARRAY_SIZE(rx51_peripherals_spi_board_info)); } -- cgit v1.2.3-58-ga151 From 2886d128d8ff83af88b9cbe6dbf7f0d2bbee8d76 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 18 Nov 2009 18:41:07 -0800 Subject: omap3: Add CompuLab CM-T35 board support This patch adds basic support for CompuLab CM-T35 module. Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-cm-t35.c | 507 +++++++++++++++++++++++++++++++++++++ 3 files changed, 513 insertions(+) create mode 100644 arch/arm/mach-omap2/board-cm-t35.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0d14dde68cd4..fa2099624603 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -101,6 +101,10 @@ config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_CM_T35 + bool "CompuLab CM-T35 module" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d56fb2b19195..1b37f2a1cc0c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -83,6 +83,8 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-peripherals.o \ mmc-twl4030.o \ board-zoom-debugboard.o +obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c new file mode 100644 index 000000000000..22c45290db63 --- /dev/null +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -0,0 +1,507 @@ +/* + * board-cm-t35.c (CompuLab CM-T35 module) + * + * Copyright (C) 2009 CompuLab, Ltd. + * Author: Mike Rapoport + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "sdram-micron-mt46h32m32lf-6.h" +#include "mmc-twl4030.h" + +#define CM_T35_GPIO_PENDOWN 57 + +#define CM_T35_SMSC911X_CS 5 +#define CM_T35_SMSC911X_GPIO 163 +#define SB_T35_SMSC911X_CS 4 +#define SB_T35_SMSC911X_GPIO 65 + +#define NAND_BLOCK_SIZE SZ_128K +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS0_BASE_ADDR (OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE) + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include + +static struct smsc911x_platform_config cm_t35_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource cm_t35_smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), + .end = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device cm_t35_smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(cm_t35_smsc911x_resources), + .resource = cm_t35_smsc911x_resources, + .dev = { + .platform_data = &cm_t35_smsc911x_config, + }, +}; + +static struct resource sb_t35_smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), + .end = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device sb_t35_smsc911x_device = { + .name = "smsc911x", + .id = 1, + .num_resources = ARRAY_SIZE(sb_t35_smsc911x_resources), + .resource = sb_t35_smsc911x_resources, + .dev = { + .platform_data = &cm_t35_smsc911x_config, + }, +}; + +static void __init cm_t35_init_smsc911x(struct platform_device *dev, + int cs, int irq_gpio) +{ + unsigned long cs_mem_base; + + if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) { + pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n"); + return; + } + + dev->resource[0].start = cs_mem_base + 0x0; + dev->resource[0].end = cs_mem_base + 0xff; + + if ((gpio_request(irq_gpio, "ETH IRQ") == 0) && + (gpio_direction_input(irq_gpio) == 0)) { + gpio_export(irq_gpio, 0); + } else { + pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n"); + return; + } + + platform_device_register(dev); +} + +static void __init cm_t35_init_ethernet(void) +{ + cm_t35_init_smsc911x(&cm_t35_smsc911x_device, + CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO); + cm_t35_init_smsc911x(&sb_t35_smsc911x_device, + SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO); +} +#else +static inline void __init cm_t35_init_ethernet(void) { return; } +#endif + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include + +static struct gpio_led cm_t35_leds[] = { + [0] = { + .gpio = 186, + .name = "cm-t35:green", + .default_trigger = "heartbeat", + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data cm_t35_led_pdata = { + .num_leds = ARRAY_SIZE(cm_t35_leds), + .leds = cm_t35_leds, +}; + +static struct platform_device cm_t35_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &cm_t35_led_pdata, + }, +}; + +static void __init cm_t35_init_led(void) +{ + platform_device_register(&cm_t35_led_device); +} +#else +static inline void cm_t35_init_led(void) {} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#include +#include +#include + +static struct mtd_partition cm_t35_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, /* Offset = 0x00000 */ + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + }, + { + .name = "uboot environment", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "linux", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data cm_t35_nand_data = { + .parts = cm_t35_nand_partitions, + .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .cs = 0, + .gpmc_cs_baseaddr = (void __iomem *)GPMC_CS0_BASE_ADDR, + .gpmc_baseaddr = (void __iomem *)OMAP34XX_GPMC_VIRT, + +}; + +static struct resource cm_t35_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device cm_t35_nand_device = { + .name = "omap2-nand", + .id = -1, + .num_resources = 1, + .resource = &cm_t35_nand_resource, + .dev = { + .platform_data = &cm_t35_nand_data, + }, +}; + +static void __init cm_t35_init_nand(void) +{ + if (platform_device_register(&cm_t35_nand_device) < 0) + pr_err("CM-T35: Unable to register NAND device\n"); +} +#else +static inline void cm_t35_init_nand(void) {} +#endif + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +#include + +#include + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(CM_T35_GPIO_PENDOWN); +} + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct spi_board_info cm_t35_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +}; + +static void __init cm_t35_init_ads7846(void) +{ + if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && + (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) { + gpio_export(CM_T35_GPIO_PENDOWN, 0); + } else { + pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n"); + return; + } + + spi_register_board_info(cm_t35_spi_board_info, + ARRAY_SIZE(cm_t35_spi_board_info)); +} +#else +static inline void cm_t35_init_ads7846(void) {} +#endif + +static struct regulator_consumer_supply cm_t35_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply cm_t35_vsim_supply = { + .supply = "vmmc_aux", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data cm_t35_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &cm_t35_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data cm_t35_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &cm_t35_vsim_supply, +}; + +static struct twl4030_usb_data cm_t35_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int cm_t35_keymap[] = { + KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), + KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), + KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D), +}; + +static struct matrix_keymap_data cm_t35_keymap_data = { + .keymap = cm_t35_keymap, + .keymap_size = ARRAY_SIZE(cm_t35_keymap), +}; + +static struct twl4030_keypad_data cm_t35_kp_data = { + .keymap_data = &cm_t35_keymap_data, + .rows = 3, + .cols = 3, + .rep = 1, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + + }, + { + .mmc = 2, + .wires = 4, + .transceiver = 1, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .ocr_mask = 0x00100000, /* 3.3V */ + }, + {} /* Terminator */ +}; + +static struct ehci_hcd_omap_platform_data ehci_pdata = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[2] = -EINVAL +}; + +static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, + unsigned ngpio) +{ + int wlan_rst = gpio + 2; + + if ((gpio_request(wlan_rst, "WLAN RST") == 0) && + (gpio_direction_output(wlan_rst, 1) == 0)) { + gpio_export(wlan_rst, 0); + + udelay(10); + gpio_set_value(wlan_rst, 0); + udelay(10); + gpio_set_value(wlan_rst, 1); + } else { + pr_err("CM-T35: could not obtain gpio for WiFi reset\n"); + } + + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + cm_t35_vmmc1_supply.dev = mmc[0].dev; + cm_t35_vsim_supply.dev = mmc[0].dev; + + /* setup USB with proper PHY reset GPIOs */ + ehci_pdata.reset_gpio_port[0] = gpio + 6; + ehci_pdata.reset_gpio_port[1] = gpio + 7; + + usb_ehci_init(&ehci_pdata); + + return 0; +} + +static struct twl4030_gpio_platform_data cm_t35_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .setup = cm_t35_twl_gpio_setup, +}; + +static struct twl4030_platform_data cm_t35_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .keypad = &cm_t35_kp_data, + .usb = &cm_t35_usb_data, + .gpio = &cm_t35_gpio_data, + .vmmc1 = &cm_t35_vmmc1, + .vsim = &cm_t35_vsim, +}; + +static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("tps65930", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &cm_t35_twldata, + }, +}; + +static void __init cm_t35_init_i2c(void) +{ + omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo, + ARRAY_SIZE(cm_t35_i2c_boardinfo)); +} + +static struct omap_board_config_kernel cm_t35_config[] __initdata = { +}; + +static void __init cm_t35_init_irq(void) +{ + omap_board_config = cm_t35_config; + omap_board_config_size = ARRAY_SIZE(cm_t35_config); + + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init cm_t35_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +static void __init cm_t35_init(void) +{ + omap_serial_init(); + cm_t35_init_i2c(); + cm_t35_init_nand(); + cm_t35_init_ads7846(); + cm_t35_init_ethernet(); + cm_t35_init_led(); + + usb_musb_init(); + + omap_cfg_reg(AF26_34XX_SYS_NIRQ); +} + +MACHINE_START(CM_T35, "Compulab CM-T35") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = cm_t35_map_io, + .init_irq = cm_t35_init_irq, + .init_machine = cm_t35_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3-58-ga151 From 35ca0d1e4292d1bf4a0d50de4c71dbaf73db0a31 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 18 Nov 2009 18:41:07 -0800 Subject: omap3: Add CompuLab CM-T35 defconfig Add CompuLab CM-T35 defconfig Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren --- arch/arm/configs/cm_t35_defconfig | 1733 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1733 insertions(+) create mode 100644 arch/arm/configs/cm_t35_defconfig diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig new file mode 100644 index 000000000000..e42c5c873eb2 --- /dev/null +++ b/arch/arm/configs/cm_t35_defconfig @@ -0,0 +1,1733 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc4 +# Tue Oct 13 17:10:40 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +CONFIG_MACH_CM_T35=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TWL4030=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From 58e111621d402d41cb0cabae7c532d6194b7d943 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 18 Nov 2009 18:41:07 -0800 Subject: omap3: Add minimal IGEP v2 support The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-igep0020.c | 251 +++++++++++++++++++++++++++++++++++ 3 files changed, 257 insertions(+) create mode 100644 arch/arm/mach-omap2/board-igep0020.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fa2099624603..119e7b0133a4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -105,6 +105,10 @@ config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_IGEP0020 + bool "IGEP0020" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1b37f2a1cc0c..c2f3de9a0a08 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -85,6 +85,8 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c new file mode 100644 index 000000000000..fa62e80c13b7 --- /dev/null +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2009 Integration Software and Electronic Engineering. + * + * Modified from mach-omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include "mmc-twl4030.h" + +#define IGEP2_SMSC911X_CS 5 +#define IGEP2_SMSC911X_GPIO 176 +#define IGEP2_GPIO_USBH_NRESET 24 +#define IGEP2_GPIO_LED0_RED 26 +#define IGEP2_GPIO_LED0_GREEN 27 +#define IGEP2_GPIO_LED1_RED 28 + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + +#include + +static struct smsc911x_platform_config igep2_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS , + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource igep2_smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), + .end = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device igep2_smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(igep2_smsc911x_resources), + .resource = igep2_smsc911x_resources, + .dev = { + .platform_data = &igep2_smsc911x_config, + }, +}; + +static inline void __init igep2_init_smsc911x(void) +{ + unsigned long cs_mem_base; + + if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { + pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n"); + gpmc_cs_free(IGEP2_SMSC911X_CS); + return; + } + + igep2_smsc911x_resources[0].start = cs_mem_base + 0x0; + igep2_smsc911x_resources[0].end = cs_mem_base + 0xff; + + if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && + (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) { + gpio_export(IGEP2_SMSC911X_GPIO, 0); + } else { + pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n"); + return; + } + + platform_device_register(&igep2_smsc911x_device); +} + +#else +static inline void __init igep2_init_smsc911x(void) { } +#endif + +static struct omap_board_config_kernel igep2_config[] __initdata = { +}; + +static struct regulator_consumer_supply igep2_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data igep2_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep2_vmmc1_supply, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +static int igep2_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + igep2_vmmc1_supply.dev = mmc[0].dev; + + return 0; +}; + +static struct twl4030_gpio_platform_data igep2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = false, + .setup = igep2_twl_gpio_setup, +}; + +static struct twl4030_usb_data igep2_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static void __init igep2_init_irq(void) +{ + omap_board_config = igep2_config; + omap_board_config_size = ARRAY_SIZE(igep2_config); + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct twl4030_platform_data igep2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &igep2_usb_data, + .gpio = &igep2_gpio_data, + .vmmc1 = &igep2_vmmc1, + +}; + +static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &igep2_twldata, + }, +}; + +static int __init igep2_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo, + ARRAY_SIZE(igep2_i2c_boardinfo)); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); + return 0; +} + +static void __init igep2_init(void) +{ + igep2_i2c_init(); + omap_serial_init(); + usb_musb_init(); + + igep2_init_smsc911x(); + + /* GPIO userspace leds */ + if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED0_RED, 0); + gpio_set_value(IGEP2_GPIO_LED0_RED, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); + + if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED0_GREEN, 0); + gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); + + if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED1_RED, 0); + gpio_set_value(IGEP2_GPIO_LED1_RED, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); +} + +static void __init igep2_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(IGEP0020, "IGEP v2 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = igep2_map_io, + .init_irq = igep2_init_irq, + .init_machine = igep2_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3-58-ga151 From 9d9e5027252f7a610bad928bcba906fbb838e3ba Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 18 Nov 2009 18:41:08 -0800 Subject: omap3: Add defconfig for IGEP v2 board Add defconfig for IGEP v2 board Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/configs/igep0020_defconfig | 1554 +++++++++++++++++++++++++++++++++++ 1 file changed, 1554 insertions(+) create mode 100644 arch/arm/configs/igep0020_defconfig diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig new file mode 100644 index 000000000000..c97f8d0ded48 --- /dev/null +++ b/arch/arm/configs/igep0020_defconfig @@ -0,0 +1,1554 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Fri Nov 13 12:01:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_OMAP_3630SDP is not set +CONFIG_MACH_IGEP0020=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_EEPROM_93CX6=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8187=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_SPI=m +CONFIG_ATH_COMMON=m +CONFIG_AR9170_USB=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_B43=m +# CONFIG_B43_SDIO is not set +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_HWRNG=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_HT=y +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WL12XX=m +# CONFIG_WL1251 is not set +# CONFIG_WL1271 is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SDIOHOST_POSSIBLE=y +# CONFIG_SSB_SDIOHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From 34c9ac2376fbd04399be92312e4fa1e19a638eaa Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Wed, 18 Nov 2009 18:41:08 -0800 Subject: omap: 3630sdp: introduce 3630 sdp board support Add 3630SDP board support The board shares the same peripherals as a zoom2 main. So reuse the peripheral file of zoom platform. Peripheral zoom2 zoom3 sdp3630 --------------------------------------- Ethernet smsc smsc smc NOR n/a n/a B Onenand n/a n/a B HDMI A A B (persent on different i2c) NAND A A A (same nand) SDRAM A A A (same sdram) Keypad A A A (same twl) Camera A A A (same sensor can be mounted) LCD Display A A A (same wvga display) OPPs A A A (same chip feature) Audio A A A (same audio via twl5030) OMAP3630 details can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606 Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 ++ arch/arm/mach-omap2/Makefile | 3 ++ arch/arm/mach-omap2/board-3630sdp.c | 101 ++++++++++++++++++++++++++++++++++++ 3 files changed, 108 insertions(+) create mode 100755 arch/arm/mach-omap2/board-3630sdp.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 119e7b0133a4..b271a65f69d3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -109,6 +109,10 @@ config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP_3630SDP + bool "OMAP3630 SDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c2f3de9a0a08..3e1b45fe59a1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -83,6 +83,9 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-peripherals.o \ mmc-twl4030.o \ board-zoom-debugboard.o +obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ + board-zoom-peripherals.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c new file mode 100755 index 000000000000..348b70b98336 --- /dev/null +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include "sdram-hynix-h8mbx00u0mer-0em.h" + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 3, + .flags = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + board_smc91x_data.gpio_irq = 158; + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */ + +static void enable_board_wakeup_source(void) +{ + omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = 126, + .reset_gpio_port[1] = 61, + .reset_gpio_port[2] = -EINVAL +}; + +static void __init omap_sdp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +static struct omap_board_config_kernel sdp_config[] __initdata = { +}; + +static void __init omap_sdp_init_irq(void) +{ + omap_board_config = sdp_config; + omap_board_config_size = ARRAY_SIZE(sdp_config); + omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params, + h8mbx00u0mer0em_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init omap_sdp_init(void) +{ + zoom_peripherals_init(); + board_smc91x_init(); + enable_board_wakeup_source(); + usb_ehci_init(&ehci_pdata); +} + +MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_sdp_map_io, + .init_irq = omap_sdp_init_irq, + .init_machine = omap_sdp_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3-58-ga151 From 62002e8f82c00a4efdbdc69ebfc540fddf28aae0 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Wed, 18 Nov 2009 18:41:08 -0800 Subject: omap: 3630sdp: defconfig creation Create 3630sdp defconfig file Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_3630sdp_defconfig | 1611 +++++++++++++++++++++++++++++++ 1 file changed, 1611 insertions(+) create mode 100644 arch/arm/configs/omap_3630sdp_defconfig diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig new file mode 100644 index 000000000000..e836c8a00148 --- /dev/null +++ b/arch/arm/configs/omap_3630sdp_defconfig @@ -0,0 +1,1611 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc6 +# Thu Nov 12 12:21:37 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +CONFIG_MACH_OMAP_3630SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_VERBOSE=y +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=y +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set +# CONFIG_HDQ_MASTER_OMAP is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_DEBUG=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_TWL4030 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From c625327e2f5a506a89563e14ed837c82fa61548f Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 18 Nov 2009 18:41:09 -0800 Subject: AM35xx: Add support for AM3517 EVM board This patch creates a minimal AM3517 EVM board support. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 ++ arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-am3517evm.c | 86 +++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+) create mode 100644 arch/arm/mach-omap2/board-am3517evm.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b271a65f69d3..034d9908228c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,10 @@ config MACH_OMAP3EVM bool "OMAP 3530 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP3517EVM + bool "OMAP3517/ AM3517 EVM board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 3e1b45fe59a1..59b0ccce3099 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -93,6 +93,8 @@ obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o +obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o + # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c new file mode 100644 index 000000000000..415a13d767cc --- /dev/null +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -0,0 +1,86 @@ +/* + * linux/arch/arm/mach-omap2/board-am3517evm.c + * + * Copyright (C) 2009 Texas Instruments Incorporated + * Author: Ranjith Lohithakshan + * + * Based on mach-omap2/board-omap3evm.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +/* + * Board initialization + */ +static struct omap_board_config_kernel am3517_evm_config[] __initdata = { +}; + +static struct platform_device *am3517_evm_devices[] __initdata = { +}; + +static void __init am3517_evm_init_irq(void) +{ + omap_board_config = am3517_evm_config; + omap_board_config_size = ARRAY_SIZE(am3517_evm_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = 57, + .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[2] = -EINVAL +}; + +static void __init am3517_evm_init(void) +{ + platform_add_devices(am3517_evm_devices, + ARRAY_SIZE(am3517_evm_devices)); + + omap_serial_init(); + usb_ehci_init(&ehci_pdata); +} + +static void __init am3517_evm_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = am3517_evm_map_io, + .init_irq = am3517_evm_init_irq, + .init_machine = am3517_evm_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3-58-ga151 From 4421752e331cfb1d942b47ffdb26e451a8da58a0 Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 18 Nov 2009 18:41:09 -0800 Subject: AM35xx: Defconfig for AM3517 EVM board This patch adds a minimal defconfig for AM3517 EVM board. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Tony Lindgren --- arch/arm/configs/am3517_evm_defconfig | 1207 +++++++++++++++++++++++++++++++++ 1 file changed, 1207 insertions(+) create mode 100644 arch/arm/configs/am3517_evm_defconfig diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig new file mode 100644 index 000000000000..ad54e92dd436 --- /dev/null +++ b/arch/arm/configs/am3517_evm_defconfig @@ -0,0 +1,1207 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Wed Oct 28 15:47:47 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +CONFIG_MACH_OMAP3517EVM=y +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_CM_T35 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151 From 9a01609e1885b827b979d6d9dd86f43208a9e5fc Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 1 Dec 2009 20:09:26 +0000 Subject: arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_defconfig | 2119 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 2119 insertions(+) create mode 100644 arch/arm/configs/omap3_defconfig diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig new file mode 100644 index 000000000000..2af28eab9060 --- /dev/null +++ b/arch/arm/configs/omap3_defconfig @@ -0,0 +1,2119 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Tue Dec 1 14:04:02 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_NONE=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_OMAP_LDP=y +CONFIG_MACH_OVERO=y +CONFIG_MACH_OMAP3EVM=y +CONFIG_MACH_OMAP3517EVM=y +CONFIG_MACH_OMAP3_PANDORA=y +CONFIG_MACH_OMAP_3430SDP=y +CONFIG_MACH_NOKIA_RX51=y +CONFIG_MACH_OMAP_ZOOM2=y +CONFIG_MACH_OMAP_ZOOM3=y +CONFIG_MACH_CM_T35=y +CONFIG_MACH_IGEP0020=y +CONFIG_MACH_OMAP_3630SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_VERBOSE=y +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +CONFIG_MTD_OOPS=y + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +# CONFIG_BLK_DEV_DM is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=y +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=y +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set +# CONFIG_HDQ_MASTER_OMAP is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_OMAP=y +CONFIG_FB_OMAP_LCD_VGA=y +# CONFIG_FB_OMAP_031M3R is not set +# CONFIG_FB_OMAP_048M3R is not set +CONFIG_FB_OMAP_079M3R=y +# CONFIG_FB_OMAP_092M9R is not set +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +# CONFIG_SND_OMAP_SOC_OVERO is not set +# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set +# CONFIG_SND_OMAP_SOC_SDP3430 is not set +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set +# CONFIG_SND_OMAP_SOC_ZOOM2 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_DEBUG=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +CONFIG_USB_WDM=y +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=y +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +CONFIG_LOCK_STAT=y +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-58-ga151